National Irrigation Administration Tender

Description Invitation To Bid For Supply & Delivery Of Const. Materials, Supply & Delivery With Installation Of Materials Testing Equipment For The Use Of Nia-r9 Balintawak, Pagadian City 1. The National Irrigation Administration – Regional Office Ix, Through The Cob Invites Bidders To Bid For – Project/brief Description: Two (2) Lots For The Supply & Delivery Of Various Equipment As Per Bsp Technical Specifications: Lot No. Item Description Approved Budget For The Contract (abc) (in Php, Inclusive Of All Applicable Taxes And Other Charges 1 Supply & Delivery Of Construction Materials Php 1,037,218.23 2 Supply & Delivery With Installation Of Materials Testing Equipment (see Attached Technical Specs With Free Demo & Training) Php 13,598,583.52 (bids Received In Excess Of The Above Amount Shall Be Automatically Rejected At Bid Opening, Or During Bid Evaluation) Reference Number Niar9-cob-029 (goods) 2. The National Irrigation Administration – Regional Office Ix Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By One Hundred Twenty (120) Calendar Days. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From National Irrigation Administration – Regional Office Ix And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 10 – March 4, 2024 Before 8:00 Am From The Given Address And Website(s) Below National Irrigation Administration – Regional Office Ix, Lot 2, Block 15, Regional Center, Balintawak, Pagadian City, Zambo. Sur Https://notices.philgeps.gov.ph, Http://region9.nia.gov.ph/?q=content/invitation-bid And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Following Amounts: Total Amount Of Abc To Be Bid (in Philippine Peso) Maximum Cost Of Bidding Documents (in Philippine Pes) More Than 1 Million Up To 5 Million Php 5,000.00 More Than 10 Million Up To 50 Million Php 25,000.00 The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Will Be Presented In Person, By Facsimile, Or Through Electronic Means. 6. The National Irrigation Administration – Regional Office Ix Will Hold A Pre-bid Conference On February 21, 2024, 9:00 Am At National Irrigation Administration – Regional Office Ix, Lot 2, Block 15, Regional Center, Balintawak, Pagadian City, Zambo. Sur And/or Through Video Conferencing Or Webcasting Via Www.region9.nia.gov.ph, Google Meet, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below On Or Before March 4, 2024 At 8:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On March 4, 2024, 9:00 Am At The Given Address Below National Irrigation Administration – Regional Office Ix, Lot 2, Block 15, Regional Center, Balintawak, Pagadian City, Zambo. Sur And/or Via Www.region9.nia.gov.ph, Google Meet. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Procuring Entity Will Not Hold Responsible Of Any And All Bid Documents/proposals Losses. And All Interested Contractors/bidders Must Inform The Bac Chairperson Thru Its Secretariat Of Their Documents Submitted In Any Means Provided Above Before The Date Of The Bid Opening To Avoid Late Submission. 11. The National Irrigation Administration – Regional Office Ix Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Marietta M. Cortes Bac Secretariat, Nia-regional Office Lot 2, Block 15, Regional Center Ix, Balintawak, Pagadian City, Zambo. Sur Niaregion9bac@yahoo.com 09630884373 – Office Number 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Date Posted: February 10, 2024 (sgd) Antonio B. Gujeling Bac Chairperson Item No. Description Quantity Unit Total Delivered, Weeks/months Lot 1 – Supply & Delivery Of Construction Materials 120 1 Cement 240 Bag 240 2 Sand 16 Cu.m 16 3 Gravel 11 Cu.m 11 4 2” X 2” X 10’ Coco Lumber 85 Bd.ft 85 5 2” X 3” X 10’ Coco Lumber 85 Bd.ft 85 6 ¼” X 4” X 8’ Ordinary Plywood 4 Pc 4 7 Common Nails (assorted Cwn) 2 Kg 2 8 Rsb 12mm Dia X 6m 37 Pc 37 9 Rsb 10mm Dia X 6m 139 Pc 139 10 Tie Wire 11 Kg 11 11 Welding Rod 15 Kg 15 12 Chb 1,285 Pc 1,285 13 4” X 8’ X 4.5mm Thick Fiber Cement Board 53 Pc 53 14 Double Metal Furring 19mm X 50mm X 0.6mm Thick (5m Length) 159 Pc 159 15 Carrying Channel 12mm X 38mm X 0.5m Thickness (5m Length) 50 Pc 50 16 25mm X 25mm X 0.40mm Thk X 5.0m Long Wall Angle 33 Pc 33 17 Metal Furring Clip (w-clip) 841 Pc 841 18 Blind Rivets 1/8” X ½” 1,963 Pc 1,963 19 Drywall Screw 595 Pc 595 20 High Quality Tempered Glass Double Door (2m X 2.2m) 1 Set 1 21 High Quality Tempered Glass Door (1m X 2.2m) 2 Set 2 22 Pvc Louver Door (0.6m X 2.1m) 1 Set 1 23 2 X 4 Aluminum Powder Coated Frame W/ ¼” Thk Reflective Glass (3.2m X 1.60m) 4 Set 4 24 2 X 4 Aluminum Powder Coated Frame W/ ¼” Thk Reflective Glass (3.2m X 0.60m) 3 Set 3 25 2 X 4 Aluminum Powder Coated Frame W/ ¼” Thk Reflective Glass (1.60m X 0.60m) 1 Set 1 26 Awning Window Glass Type (0.60 X 0.40m) 1 Set 1 27 0.6m X 0.6m Ceramic Floor Tiles 346 Pc 346 28 15 X 60 Stone Ledge Tile 337 Pc 337 29 Tile Grout 15 Bag 15 30 Tile Adhesive (25kg) 17 Bag 17 31 Flat Wall Enamel 10 Gal 10 32 Enamel Quick Dry 10 Gal 10 33 Concrete Neutralizer 5 Gal 5 34 Concrete Sealer/primer 10 Gal 10 35 Patching Compound 12 Gal 12 36 Semi-gloss (double Coat) 19 Gal 19 37 4” Ø Pvc Pipe (s-1000) X 6m 10 Pc 10 38 2” Ø Pvc Pipe (s-1000) X 6m 8 Pc 8 39 4” Ø Pvc 45 Deg. Elbow (s-1000) 2 Pc 2 40 4” Ø Pvc 90 Deg. Elbow (s-1000) 1 Pc 1 41 2” Ø Pvc 45 Deg. Elbow (s-1000) 4 Pc 4 42 2” Ø Pvc 90 Deg. Elbow (s-1000) 12 Pc 12 43 2” X 4” Ø Pvc Wye (s-1000) 6 Pc 6 44 4” Ø Pvc P-trap (s-1000) 1 Pc 1 45 4” Ø Pvc Clean Out W/ Cap (s-1000) 1 Pc 1 46 Solvent Cement (100cc) 2 Can 2 47 2” X 2” Stainless Steel Floor Drain 1 Pc 1 48 Lavatory Wall Hung W/ Complete Acc. W/ P-trap 1 Pc 1 49 Flush Tank Type Water Closet W/ Complete Acc. 1 Pc 1 50 Brass Hose Bibb Water Closet 5 Pc 5 51 Towel Rack (stainless) 1 Pc 1 52 Aluminum Soap Disc Holder 1 Pc 1 53 Kitchen Sink W/ Stainless W/ Drainer Fittings Complete Acc. 4 Pc 4 54 ¾” Ø Pvc Blue Pipe X 6.0m (for Horizontal Water Supply Distribution) 15 Pc 15 55 ½” Ø Pvc Blue Pipe X 6.0m (for Horizontal Water Supply Distribution) 5 Pc 5 56 ¾” X ½” Pvc Blue Tee Reducer 6 Pc 6 57 ½” Pvc Blue Coupling 5 Pc 5 58 Pvc Blue Female Adaptor, ½” Ø 5 Pc 5 59 Pvc Blue Male Adaptor, ¾” Ø 3 Pc 3 60 Pvc Blue Ball Valve, ¾” Ø 2 Pc 2 61 ½” Pvc Blue 90 Deg. Elbow 10 Pc 10 62 ¾” Pvc Blue 90 Deg. Elbow 5 Pc 5 63 3.5mm2 Thhn/thwn Cu.wire 100 Ln.m 100 64 2.0mm2 Thhn/thwn Cu.wire 150 Ln.m 150 65 3 Phase Panel Board 12 Branches (bolt On/tqd) 1 Pc 1 66 3 P. Main Breaker Tqd 150 Amp 1 Pc 1 67 2p Circuit Breaker 40 Amp (bolt On) 2 Roll 2 68 2p Circuit Breaker 30amp (bolt On) 5 Pc 5 69 2p Circuit Breaker 15amp (bolt On) 5 Pc 5 70 Junction Box 50 Pc 50 71 Utility Box 50 Pc 50 72 Flexible Hose ½ 4 Roll 4 73 Electrical Tape 20 Pc 20 74 2 Gang Plate (wide Series) 2 Box 2 75 Switch Flush Type (wide Series) 2 Box 2 76 Outlet Flush Type (wide Series) 3 Box 3 77 1.5hp Wall Mounted Split Type Acu Inverter 3 Unit 3 78 Exhaust Fan Wall Mounted Ventilation 1 Pc 1 Lot 2 – Supply, Delivery And Installation Of Materials Testing Equipment (see Attached Technical Specs With Free Demo & Training) 120 1 Stainless Sieve, 8”x2”, Sieve No. 3” 1 Pc 1 Stainless Sieve, 8”x2”, Sieve No. 2” 1 Pc 1 Stainless Sieve, 8”x2”, Sieve No. 1 ½” 1 Pc 1 Stainless Sieve, 8”x2”, Sieve No. 1” 1 Pc 1 Stainless Sieve, 8”x2”, Sieve No. ¾” 1 Pc 1 Stainless Sieve, 8”x2”, Sieve No. ½” 1 Pc 1 Stainless Sieve, 8”x2”, Sieve No. 3/8” 1 Pc 1 Stainless Sieve, 8”x2”, Sieve No. 4 1 Pc 1 Stainless Sieve, 8”x2”, Sieve No. 8 1 Pc 1 Stainless Sieve, 8”x2”, Sieve No. 12 1 Pc 1 Stainless Sieve, 8”x2”, Sieve No. 16 1 Pc 1 Stainless Sieve, 8”x2”, Sieve No. 30 1 Pc 1 Stainless Sieve, 8”x2”, Sieve No. 40 1 Pc 1 Stainless Sieve, 8”x2”, Sieve No. 50 1 Pc 1 Stainless Sieve, 8”x2”, Sieve No. 100 1 Pc 1 Stainless Sieve, 8”x2”, Sieve No. 200 1 Pc 1 Stainless Pan & Cover 1 Pc 1 2 Motorized Liquid Limit Apparatus 1 Pc 1 3 Plastic Limit Set 1 Set 1 4 Proctor Mould (split Standard) 3 Pc 3 5 Proctor Mould (split Modified) 3 Pc 3 6 Standard Proctor Rammer 1 Pc 1 7 Modified Proctor Rammer 1 Pc 1 8 Specific Gravity Bottle, Gay Lussac Type 1 Pc 1 9 Density Wire Basket 1 Pc 1 10 Mixing Pan 1 Pc 1 11 Field Density Test Set 1 Set 1 12 Speedy Moisture Testing, “speedy Uk” 1 Pc 1 13 Carbide Ampoules 1 Pc 1 14 Non-nuclear Soil Density Gauge 1 Pc 1 15 Universal Testing Machine 1000kn 1 Pc 1 Flat Specimen Jaw Set (4 Pcs) 1 Set 1 Round Specimen Jaw Set A (4 Pcs) 1 Set 1 Round Specimen Jaw Set B (4 Pcs) 1 Set 1 Compression Platen Set (225mm Dia.) 1 Set 1 Bending Test Device 1 Set 1 Mounting Screw 1 Set 1 Electronic Extensometer 100mm Gauge Length With 25mm Deformation 1 Pc 1 Computer Printer 1 Pc 1 Computer Printer Console Control Unit With Built-in Computer And Pre-installed With Testmaster Software 1 Pc 1 2 Steps Ladder 1 Pc 1 16 Laboratory Ovens, Forced Ventilation 1 Pc 1 17 Digital Balance 1 Pc 1 18 Slump Test Set, Consist Of: 1 Set 1 19 Moisture Content Tin With Cover 1 Pc 1 20 Glass Graduated Cylinder 100 Capacity, 1 Ml Division 2 Pc 2 Glass Graduated Cylinder 250 Capacity, 5 Ml Division 4 Pc 4 Glass Graduated Cylinder 500 Capacity, 5 Ml Division 4 Pc 4 Glass Graduated Cylinder 1000 Capacity, 5 Ml Division 4 Pc 4 21 Compression Testing Machine 2000kn Cap 1 Pc 1 Vertical Daylight To 376mm For, 2000kn Frames 1 Pc 1 Dual Low Range With Pressure, Transducer 250kn 1 Pc 1 Flexural Device For Concrete Beams 1 Pc 1 Steel Cylinder Moulds 3 Pc 3 22 Los Angeles (la) Abrasion Machine, 30 To 33 Rpm, Complete With 12 Pcs Abrasive Steel Balls And Catching 1 Pc 1 23 Elongation/length Gauge 1 Pc 1 24 Flakiness/thickness Gauge 1 Pc 1 Technical Specifications Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] Lot 1 – Supply & Delivery Of Construction Materials 1 Cement 2 Sand 3 Gravel 4 2” X 2” X 10’ Coco Lumber 5 2” X 3” X 10’ Coco Lumber 6 ¼” X 4” X 8’ Ordinary Plywood 7 Common Nails (assorted Cwn) 8 Rsb 12mm Dia X 6m 9 Rsb 10mm Dia X 6m 10 Tie Wire 11 Welding Rod 12 Chb 13 4” X 8’ X 4.5mm Thick Fiber Cement Board 14 Double Metal Furring 19mm X 50mm X 0.6mm Thick (5m Length) 15 Carrying Channel 12mm X 38mm X 0.5m Thickness (5m Length) 16 25mm X 25mm X 0.40mm Thk X 5.0m Long Wall Angle 17 Metal Furring Clip (w-clip) 18 Blind Rivets 1/8” X ½” 19 Drywall Screw 20 High Quality Tempered Glass Double Door (2m X 2.2m) 21 High Quality Tempered Glass Door (1m X 2.2m) 22 Pvc Louver Door (0.6m X 2.1m) 23 2 X 4 Aluminum Powder Coated Frame W/ ¼” Thk Reflective Glass (3.2m X 1.60m) 24 2 X 4 Aluminum Powder Coated Frame W/ ¼” Thk Reflective Glass (3.2m X 0.60m) 25 2 X 4 Aluminum Powder Coated Frame W/ ¼” Thk Reflective Glass (1.60m X 0.60m) 26 Awning Window Glass Type (0.60 X 0.40m) 27 0.6m X 0.6m Ceramic Floor Tiles 28 15 X 60 Stone Ledge Tile 29 Tile Grout 30 Tile Adhesive (25kg) 31 Flat Wall Enamel 32 Enamel Quick Dry 33 Concrete Neutralizer 34 Concrete Sealer/primer 35 Patching Compound 36 Semi-gloss (double Coat) 37 4” Ø Pvc Pipe (s-1000) X 6m 38 2” Ø Pvc Pipe (s-1000) X 6m 39 4” Ø Pvc 45 Deg. Elbow (s-1000) 40 4” Ø Pvc 90 Deg. Elbow (s-1000) 41 2” Ø Pvc 45 Deg. Elbow (s-1000) 42 2” Ø Pvc 90 Deg. Elbow (s-1000) 43 2” X 4” Ø Pvc Wye (s-1000) 44 4” Ø Pvc P-trap (s-1000) 45 4” Ø Pvc Clean Out W/ Cap (s-1000) 46 Solvent Cement (100cc) 47 2” X 2” Stainless Steel Floor Drain 48 Lavatory Wall Hung W/ Complete Acc. W/ P-trap 49 Flush Tank Type Water Closet W/ Complete Acc. 50 Brass Hose Bibb Water Closet 51 Towel Rack (stainless) 52 Aluminum Soap Disc Holder 53 Kitchen Sink W/ Stainless W/ Drainer Fittings Complete Acc. 54 ¾” Ø Pvc Blue Pipe X 6.0m (for Horizontal Water Supply Distribution) 55 ½” Ø Pvc Blue Pipe X 6.0m (for Horizontal Water Supply Distribution) 56 ¾” X ½” Pvc Blue Tee Reducer 57 ½” Pvc Blue Coupling 58 Pvc Blue Female Adaptor, ½” Ø 59 Pvc Blue Male Adaptor, ¾” Ø 60 Pvc Blue Ball Valve, ¾” Ø 61 ½” Pvc Blue 90 Deg. Elbow 62 ¾” Pvc Blue 90 Deg. Elbow 63 3.5mm2 Thhn/thwn Cu.wire 64 2.0mm2 Thhn/thwn Cu.wire 65 3 Phase Panel Board 12 Branches (bolt On/tqd) 66 3 P. Main Breaker Tqd 150 Amp 67 2p Circuit Breaker 40 Amp (bolt On) 68 2p Circuit Breaker 30amp (bolt On) 69 2p Circuit Breaker 15amp (bolt On) 70 Junction Box 71 Utility Box 72 Flexible Hose ½ 73 Electrical Tape 74 2 Gang Plate (wide Series) 75 Switch Flush Type (wide Series) 76 Outlet Flush Type (wide Series) 77 1.5hp Wall Mounted Split Type Acu Inverter 78 Exhaust Fan Wall Mounted Ventilation Lot 2 – Supply, Delivery And Installation Of Materials Testing Equipment (see Attached Technical Specs With Free Demo & Training) 1 One (1) Testing Sieve Set, Stainless Frame Sieve Stainless Wire Mesh 1-pc. Stainless Sieve , 8”x2”, Sieve No.3” 1-pc. Stainless Sieve , 8”x2”, Sieve No.2” 1-pc. Stainless Sieve , 8”x2”, Sieve No.1-1/2” 1-pc. Stainless Sieve , 8”x2”, Sieve No.1” 1-pc. Stainless Sieve , 8”x2”, Sieve No. ¾” 1-pc. Stainless Sieve , 8”x2”, Sieve No. ½” 1-pc. Stainless Sieve , 8”x2”, Sieve No. 3/8” 1-pc. Stainless Sieve , 8”x2”, Sieve No. 4 1-pc. Stainless Sieve , 8”x2”, Sieve No. 8 1-pc. Stainless Sieve , 8”x2”, Sieve No. 10 1-pc. Stainless Sieve , 8”x2”, Sieve No. 12 1-pc. Stainless Sieve , 8”x2”, Sieve No. 16 1-pc. Stainless Sieve , 8”x2”, Sieve No. 30 1-pc. Stainless Sieve , 8”x2”, Sieve No. 40 1-pc. Stainless Sieve , 8”x2”, Sieve No. 50 1-pc. Stainless Sieve , 8”x2”, Sieve No. 100 1-pc. Stainless Sieve , 8”x2”, Sieve No. 200 1-pc. Stainless Pan & Cover 2 One (1) Unit Liquid Limit Apparatus, Standard: Bs 1377, Astm D4318, Aashto T89 Particular Design To Determine The Moisture Content At Which Clay Soil Pass From Plastic To Liquid State. Electrical Operated At 120 Blows Per Minute Based On Standard. Type: Motorized – Operated Dimension (mm): Range At Least 230 (l) X{120 Or 135 (w) }x {145x185 (h)) Approx. Weight: Range At Least 4.0 To 6.3 Kg Power: Range At Least 220 Volts - 240 V, 1 Ph, 50 / 60 Hz, Unit Consists Of: Rough Brass Cup Grooving Tool (bs) Grooving Tool (astm) Grooving Tool (aashto) Calibration Block 3 One (1) Set Plastic Limit Standard: Astm D4318, Aashto T90, Bs 1377-2, Une 103-104, Uni 10014 The Plastic Limit Set Consists Of A Selection Of Equipment Required To Perform The Plastic Limit Test In Accordance With Astm And Aashto Specifications. Approx. Weight: At Least: 2 - 5 Kg Case Dimension: At Least: {340-400(l)} X {280-340 (w)} X (80-100 (h)} Set Consists Of: 1 Pc Glass Plate At Least 300 X 200 X 10 Mm 1 Pc Rod Caliper At Least Ø 3mm 1 Pc Mixing Porcelain Dish 1 Pc Flexible Spatula 100 Mm (l) 6 Pcs Aluminum Moisture Tin At Least Ø 55 X 30-35 Mm 1 Pc Carrying Case 4 Proctor Mould Used For Determining The Relationship Between The Moisture Content And Density Of Compacted Soils. Steel Made, Complete With Mould Body, Collar And Base; Plated Against Corrosion. Different Proctor Mould Models Are Available According To The Various International Standards In Use. Three (3) Pcs. Proctor Mould (split Standard) Astm | Aashto | Nf | Cnr Int. Diameter Mm: At Least 101.6 Body Height Mm: At Least 116.4 Volume Ml: At Least 944 Weight Kg: At Least 5kg 5 Three (3) Pcs. Proctor Mould (split Modified) Int. Diameter Mm: At Least 152.4 Body Height Mm: At Least 116.4 Volume Ml: At Least 2124 Weight Kg: At Least 9-10 Kg 6 Proctor Rammer Used To Compact The Soil Sample Into The Mould. The Spherical Hand Knob Is From Bakelite With Metal Screw And Protection Ring Nut; Guide Sleeve With Vent Holes. The Rammers Are Steel Made, Plated Against Corrosion One (1) Pc. Standard Proctor Rammer Astm | Aashto Cnr | Nf Diameter Mm: At Least 50.8 Fall Height Mm: At Least 304.8 Rammer Weight Kg: At Least 2.49 - 2.495 Total Weight Kg: At Least 3-5 7 One (1) Pc. Modified Proctor Rammer Astm | Aashto Cnr | Nf Diameter Mm: At Least 50.8 Fall Height Mm: At Least 457.2 Rammer Weight Kg: At Least 2.49 - 4.536 Total Weight Kg: At Least 5-8 8 One (1) Pc. Specific Gravity Bottle, Gay Lussac Type Glass, Complete With Capillary Tube Stopper, To Determine The Particle Density And Specific Gravity Of Filler In Fine Aggregates. Capacity 50 Ml 9 One (1) Pc. Density Wire Basket Stainless Steel Dia. 200x200mm, Mesh 3.35 Mm, 10 One (1) Pc. Mixing Pan, At Least 24 X 24x {24mm – 3”} 11 One (1) Set Field Density Test Set, Consisting Of: 1- Sand Density Cone 1- Jug, Glass Or Plastic, 4-l Capacity 1- Density Plate 1- Straight Edge 1- Spoon 1- 25mm Chisel Steel 1-4-l Field Can 1-mallet Rubber 1- Scoop, Sand 12 One (1) Unit Speedy Moisture Tester, Up To 0-20% Moisture Range, 6 Kgrms Sample Capacity 13 One (1) Pack Carbide Ampoules (pack Of 100) 14 Non-nuclear Soil Density Guage Functions: Soil Specifications: Wet & Dry Density , % Compaction , Moisture Designed To Operate With Standard Soils Used In Civil Construction Projects. Requires Inputs From Std.test Method For Liquid Limit, Plastic Limit, And Plasticity Index Of Soils (astmd4318), Particle Size Distribution (astmd422) Proctor Test (astm 3698 And D1577). Operational Features: Display: Full Color Graphics Driven User Interface, 480x640 Vga Touch Screen Display With Led Backlight For Easy Visibility In Daylight Or Dark Situations Status Bar: Displays Gps Status, Battery Voltage, Low Battery And Date And Time Project Details: Stores Up To 20 Projects With Details Material Details: Stores Up To 20 Materials, Details Include Material Name, Description, Max Dry Density, Opt. Moisture, Dry Density Offset, % Moisture Offset, % Greater Than 3”, % Greater Than 3/4”, % Gravel, % Sand, % Fines, Pl, Ll, Cu And Cc Data Logging: Ability To Store All Measurements Reports: Easily Download Data To Be Imported Into Excel Gps Control: When Activated Will Display Latitude And Longitude Positions, Number Of Satellites The Gauge Is Connected To As Well As The Utc Date And Time, Also Available In Utm Format. Gps Information Will Store With Each Measurement When Data Save Feature Is Enabled, (status Bar Icon) Update Software: One Touch Upload Of New Software Using A Usb Memory Stick Data Management: Quickly Access, Download Or Delete Your Project Data Set Time & Date: Quick Time And Date Setup, Mm/dd/yy And Dd/mm/yy Formats Units: Interchangeable Settings For Density (kg/m3, Lb/ft3), Temp (°c,°f) Standardization: While Gauge Is Still In The Case, A Quick One Touch Measurement Will Insure The Gauge Is Still In Proper Working Mode Calculator: Built In Four Function Calculator Enhanced Customer Support: Diagnostic Screen To Aid In Factory Support User Programmable Target Density: Used For Calculating % Compaction User Changeable Batteries: Easily Change Batteries In The Field 15 One (1) Unit - Universal Testing Machine 1000 Kn Standard: Bs En 10002-1, Iso 7500-1, Astm A370 Capacity: 1000 Kn Machine Class: Class 1 Accuracy: ±1% Displacement Resolution: At Least 0.001 Mm Compression Space: At Least 600-660 Mm Tensile Space: At Least 700-750 Mm Piston Stroke: At Least 200-250 Mm Dia. Of Round Specimen: At Least 12 - 40 Mm Thickness Of Flat Specimen: Up To 40 Mm Dimension (frame): At Least 900 X 670 X 2300 Mm Power: Atleast 380-415 V, 3phase, 50/60 Hz Unit Standard Accessories: 1 – Set Flat Specimen Jaw Set 1 – Set Round Specimen Jaw Set 1 – Set Round Specimen Jaw Set 1 – Set Compression Platen Set 1 – Set Bending Test Device 1 – Set Mounting Screw 1 – Unit Electronic Extensometer 100mm. Gauge Length With 25mm Deformation 1 – Unit Computer Printer 1 – Unit Computer Printer Console Control Unit With Built-in Computer And Pre-installed Utm Software 1 – Unit 2 Steps Ladder 16 Laboratory Ovens, Forced Ventilation, Digital Thermostat One (1) Pc. Laboratory Ovens, Forced Ventilation, Digital Thermostat High Temperature Uniformity And Precision Standards: En 932-5 | En 1097-5 | Bs 1924 :1 Astm C127, C136, D558, D559, D560, D698, D1557, D1559 Capacity: 100 Lit. Inside Dimensions Mm: At Least 400x420x600 Outside Dimensions Mm: At Least 700x515x910 Wattage: At Least 1250 Weight : Atleast 45 17 One (1) Unit Digital Balance 4200 G Capacity X 0.01 G Sens. Pan Dimensions Mm Ø 160, Power Supply Only 230v 1ph 50-60hz Under Balance Weighting Facility For Specific Gravity Tests, Rs 232 Port 18 Slump Cone Test Kits The Kit Consists Of: - Slump Cone, Stainless Steel Made - Tamping Rod, Galvanized Steel, Ø 16x600 Mm - Slump Cone Funnel, Galvanized Steel - Graduated Slump Scale Engraved In 0.5 Cm Increments With Sliding Measuring Rod - Base, Galvanized Steel, Complete - Aluminum Scoop, 500 Cc Capacity - Fine Wire Brush Weight: 10 Kg Approx. 19 One (1) Pc. Moisture Content Tin With Cover Dimension: Ø 80 Mm X 50 Mm (h) Material: Aluminum Volume (density Sand): 330 Gram 20 Glass Graduated Cylinder – 2-pcs 100 Capacity, 1 Ml Division 4-pcs 250 Capacity, 5 Ml Division 4-pcs 500 Capacity, 5 Ml Division 4-pcs 1000 Capacity, 5 Ml Division 21 Compression Testing Machine 2000 Kn Capacity To Test Cubes Up To 150 Mm Side And Cylinders Up To Ø 160x320 Mm Standards: Astm C39 | Aashto T22 | Nf P18-411 | Bs 1610 | Gost 10180-2012 220volts,60hz Technical Specs: With One (1) Unit - Vertical Daylight At Least 282-376mm, 2000 Kn Frames One (1) Unit - Dual Low Range With Pressure Tranducer 250kn One (1) Unit - Flexural Device For Concrete Beams Accessories: With Internal Surface, Base, Top And Bottom Ring Are Accurately Machined - Steel Cylinder Mould (3pcs.) 22 One (1) Unit - Los Angeles (la) Abrasion Machine, 30 To 33 Rpm, Complete With 12 Pcs Abrasive Steel Balls And Catching Tray, 220 V. 23 Length Gauge Standard: Bs 812:105.1 Ideal To Determine If Aggregate Is Elongated; I.e. If Length Is More Than 1.8 Of Nominal Size. Mounted On A Hardwood Base. Dimension(mm): Atleast 334-383(l) X 38(w) Weight: At Least 780gram - 1 Kg 24 One (1) Pc. - Flakiness / Thickness Gauge Standard: Bs 812-105.1, Used To Determine If Aggregate Is If Its Thickness Less Than 0.6 Of Its Normal Size. Dimension: Atleast 380-400 (l) X 136 (w) Approx. Weight: 600g (supplier Must Have Exclusive Distributor Certificate Direct From The Manufacturer With Red Ribbon Certificate Authenticated By The Philippine Consulate) Free Demo & Training W/ One Year Calibration Certificate!!! For Newly Purchased Item/equipment That Requires Calibration: * One-time Free Calibration After Installation. Includes Certificate Of Calibration Valid For One Year Only. *gei Shall Not Be Liable In Any Circumstances If The Equipment's Calibration Is Void And Is Lost Within One Year Due To Tampering In Any Form, Transfer From One Place To Another And Unauthorized Use, Etc. * Re-calibration Of The Equipment Must Be Charged To The Customer. *issued Coc And Sticker Must Be Returned To Gei Before Re-issuance Of The New Coc And Sticker. * One-time Free Preventive Maintenance. *supplier Must Have An Established Office, Service Center, And Technicians With 300km From Nia-region 9 Office (proof Of Ownership Must Be Presented) *warranty And Technical Support, The Supplier Is Required To Provide Warranty On Site For Parts And Labor For One (1) Year. *spare Parts Must Still Be Available With Five(5) Years From Date Of Purchase * Brand And Model, For International Brand, Name Of Existence Of At Least Ten (10) Years In The Philippines, Unit , Model Must Be In The Current Catalogue (please See Attached List Of Equipment) *full Payment Shall Be Released Once All Equipment Has Been Delivered And Installed In The Laboratory. * Only 120 Calendar Days (4mos.) Are Given To The Contractor For The Delivery Of The Abovementioned Equipment. * All Equipment’s Delivered Shall Conform To The Abovementioned Specifications And Standards. * All Products Have Passed Through Gei Quality Control And Are Guaranteed Free From Defect Upon Delivery. * Facilitate The Processing Of The Accreditation To The Brs.