NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY USA Tender

Background the National Institute Of Standards And Technology (nist) Rf Technology Division Is Seeking Lenses And Mechanical Components To Build Custom Manual Probe Stations Dedicated To The Characterization Of Active Devices And Circuits Above 100 Ghz. The Solution Must Include Microscope Bodies, Microscope Objectives, Translation And Rotation And Tip-tilt Stages, And White Light Illumination. This Solution Will Enable Transistor Large-signal Characterization That Will Be Used To Extract And Validate Transistor Models Under The Chips Program. nist Is Seeking Information From Sources That May Be Capable Of Providing A Commercial Item Solution That Can Perform Within The Capabilities Described Within This Notice. the Solution Shall Consist Of 4 Units Of Microscope Body With Coaxial Illumination, 1 Unit Of Near-infrared Microscope Body With Coaxial Illumination, 2 Units Of 20x Long Working Distance Microscope Objective Lens, 2 Units Of 10x Long Working Distance Microscope Objective Lens 1 Unit 20x Microscope Objective Lens With 0.7 Mm Glass Thickness Compensation, 1 Unit Of 20x Microscope Objective Lens With 1.1 Mm Glass Thickness Compensation, 12 Units Of Manual X Translation Stage, 4 Units Of Manual Xy Translation Stage, 4 Units Of Rotation Stage, 8 Units Of Tip-tilt Stage, 4 Units Of White Led Microscope Illuminator, 4 Units Of Led Illuminator Controller. The Specifications Regarding These Products Are Listed Below. item 0001: Microscope Body With Coaxial Illumination quantity: 4 • C-mount-compatible Thread And Focal Plane For Camera Mounting • Visible Wavelength Design (460-650 Nm) • Coaxial White Light Epi-illumination With 8 Mm Diameter By 20 Mm Length Smooth Bore Light Source Mounting • Compatible With Image Sensor Diagonal Sizes Up To 20 Mm Or Greater • M26x0.706 Thread For Mounting Microscope Objectives • 50 Mm Square M4 Or M6 Clearance Hole Mounting Pattern • Overall Length Between Camera And Objective Lens Threads Not Exceeding 160 Mm line Item 0002: Near-infrared Microscope Body With Coaxial Illumination quantity: 1 • C-mount-compatible Thread And Focal Plane For Camera Mounting • Visible And Near-in Wavelength Design (460-1500 Nm) • Coaxial Epi-illumination With 8 Mm Diameter By 20 Mm Length Smooth Bore Light Source Mounting • Compatible With Image Sensor Diagonal Sizes Up To 20 Mm Or Greater • M26x0.706 Thread For Mounting Microscope Objectives • 50 Mm Square M4 Or M6 Clearance Hole Mounting Pattern • Overall Length Between Camera And Objective Lens Threads Not Exceeding 210 Mm line Item 0003: description: 20x Long Working Distance Microscope Objective Lens quantity: 2 technical Specifications • 20x Magnification, Infinity Corrected, Plan Apo Optical Design • Working Distance Greater Than 20 Mm • Numerical Aperture (na) Of 0.4 Or Greater • M26 X 0.706 Mm Mounting Thread • 95 Mm Parfocal Distance • F = 200 Mm Tube Lens Design • Visible And Near-infrared Wavelength Transmission From 450 Nm To 1600 Nm • Outer Diameter No Larger Than 34 Mm • Field Number Of 22 Mm Or Greater line Item 0004: description: 10x Long Working Distance Microscope Objective Lens quantity: 2 technical Specifications • 10x Magnification, Infinity Corrected, Plan Apo Optical Design • Working Distance Greater Than 30 Mm • Numerical Aperture (na) Of 0.3 Or Greater • M26 X 0.706 Mm Mounting Thread • 95 Mm Parfocal Distance • F = 200 Mm Tube Lens Design • Visible And Near-infrared Wavelength Transmission From 450 Nm To 1600 Nm • Outer Diameter No Larger Than 34 Mm • Field Number Of 22 Mm Or Greater line Item 0005: description: 20x Microscope Objective Lens With 0.7 Mm Glass Thickness Compensation quantity: 1 technical Specifications • 20x Magnification, Infinity Corrected, Plan Apo Optical Design • Cover Glass Thickness Compensation For 0.7 Mm Thickness • Working Distance Greater Than 20 Mm • Numerical Aperture (na) Of 0.4 Or Greater • M26 X 0.706 Mm Mounting Thread • 95 Mm Parfocal Distance • F = 200 Mm Tube Lens Design • Visible And Near-infrared Wavelength Transmission From 450 Nm To 1600 Nm • Outer Diameter No Larger Than 34 Mm • Field Number Of 22 Mm Or Greater line Item 0006: description: 20x Microscope Objective Lens With 1.1 Mm Glass Thickness Compensation quantity: 1 technical Specifications • 20x Magnification, Infinity Corrected, Plan Apo Optical Design • Cover Glass Thickness Compensation For 1.1 Mm Thickness • Working Distance Greater Than 20 Mm • Numerical Aperture (na) Of 0.4 Or Greater • M26 X 0.706 Mm Mounting Thread • 95 Mm Parfocal Distance • F = 200 Mm Tube Lens Design • Visible And Near-infrared Wavelength Transmission From 450 Nm To 1600 Nm • Outer Diameter No Larger Than 34 Mm • Field Number Of 22 Mm Or Greater line Item 0007: description: Manual X Translation Stage quantity: 12 technical Specifications • 120 Mm X 200 Mm Anodized Aluminum Top Platform With 25 Mm Spaced M6 Hole Grid • +/- 50 Mm Travel • Counterbore Mounting Holes On Base Of Stage Compatible With M6 Screws On 25 Mm Grid • Centered Leadscrew Drive With 2 Mm Actuator Lead • Crossed Roller Bearings • 100 Kg Centered Load Capacity • Overall Stage Height Of 30 Mm Or Less line Item 0008: description: Manual Xy Translation Stage quantity: 4 technical Specifications • 120 Mm X 120 Mm Steel Top Platform With 1 Inch Spaced ¼-20 Hole Grid • +/- 20 Mm Travel • Counterbore Mounting Holes On Base Of Stage Compatible With ¼-20 Screws On 1 Inch Grid • Side-mounted Micrometer Drives • Extended Contact Steel Bearings • 70 Kg Centered Load Capacity • Overall Stage Height Of 38 Mm Or Less line Item 0009: description: Rotation Stage quantity: 4 technical Specifications • 120 Mm Diameter Steel Top Platform With ¼-20 Hole Grid • +/- 20 Mm Travel • Counterbore Mounting Holes On Base Of Stage Compatible With ¼-20 Screws On 1 Inch Grid • Micrometer Drive With +/- 4 Degree Or Greater Fine Adjustment • 360 Degree Coarse Adjustment • Crossed Roller Bearings • 20 Kg Centered Load Capacity • Overall Stage Height Of 22 Mm Or Less line Item 0010: description: Tip-tilt Stage quantity: 8 technical Specifications • 160 Mm X 220 M Anodized Aluminum Top Platform With 25 Mm Spaced M4 Hole Grid • Tip And Tilt Adjustment With +/- 0.6 Degree Range Or Greater • Counterbore Mounting Holes On Base Of Stage Compatible With M4 Screws On 25 Mm Grid • 10 Kg Centered Load Capacity • Overall Stage Height Of 35 Mm Or Less line Item 0011: description: White Led Microscope Illuminator quantity: 4 technical Specifications • White Light (400 Nm To 750 Nm) Output • 8 Mm Diameter Smooth Mounting Surface • 0.7 A Or Greater Max Forward Current • Overall Length No Greater Than 65 Mm Excluding Cable line Item 0012: description: Led Illuminator Controller quantity: 4 technical Specifications • Constant Current Led Driver • Benchtop Enclosure • Continuously Variable Output Current Up To Max Supported By Item 11 • 100-240 Vac Input • Output Connector Directly Compatible With Item 11 Connector   how To Respond To This Notice in Responding To This Notice, Please Do Not Provide Proprietary Inforrmation. Please Include Only The Following Information, Readable In Either Microsoft Word 365, Microsoft Excel 365, Or .pdf Format, In The Response: Submit The Response By Email To The Primary Point Of Contact And, If Specified, To The Secondary Point Of Contact Specialist Listed At The Bottom Of This Notice As Soon As Possible, And Preferably Before The Closing Date And Time Of This Notice. provide The Complete Name Of Your Company, Address, Name Of Contact For Follow-up Questions, Their Email, Their Phone Number And, If Your Company Has An Active Registration In Https://sam.gov, Your Company’s Unique Entity Id (uei). identify Laboratory Equipment That Your Company Sells That Is Of The Nature Addressed In The Background Section Of This Notice. Include Brand Name, Make, Model, And/or Other Distinguishing Information. state If Your Company Is The Manufacturer Of The Identified Equipment Or Is A Retailer Or Wholesaler That Normally Sells The Identified Equipment. If The Latter, Indicate Whether The Manufacturer Authorized In Writing For Your Company To Sell The Identified Equipment On Behalf Of The Manufacturer. describe Performance Capabilities And Relevant Or Beneficial Physical And Functional Features For Any Equipment You Identified To Satisfy The Nist-identified Minimum Specifications Described In This Notice. identify Any Aspects Of The Nist Market Research Notice, Including Instructions, And Draft Minimum Specifications In The Background Section Above That Could Be Viewed As Unduly Restrictive Or Contain Unnecessary Barriers That Adversely Affect Your Ability To Fully Participate And Indicate Why. In Such A Scenario, Please Offer Suggestions For How The Market Research Notice And Draft Minimum Specifications Could Be Made More Inclusive And Competitive. discuss Whether The Equipment That Your Company Sells And Which You Describe In Your Response To This Notice May Be Customized To Specifications And Indicate Any Limits To Customization. for The Naics Code Listed In This Notice: indicate Whether Your Company Is (a) A Small Business Or (b) Other Than Small Business. See The Table Of Small Business Size Standards And The Associated .pdf Download File For Small Business Size Standards And Additional Information. if You Believe The Naics Code Listed In This Notice Is Not The Best Naics Code For The Type Of Product Addressed In This Notice, Identify An Alternative Naics Code That You Believe Would Be More Appropriate For The Planned Procurement. describe Services That Are Available With The Purchase Of The Aforementioned Equipment From Your Company Such As Installation, Training, And Equipment Maintenance. describe Standard Terms And Conditions Of Sale Offered By Your Company For The Aforementioned Equipment Such As: Delivery Time After Your Company Accepts The Order; Fob Shipping Terms: Manufacturer Warranty (including Details Regarding Nature And Duration); If Available, Description(s) Of Available Extended Warranty; Equipment Setup And Test; Operator And Service Instruction Manual(s); Cleanup After Installation; And If Applicable, Other Offered Services. Provide A Copy Of Manufacturer Standard Terms And Conditions That Typically Relate To The Sale Of The Specified Equipment, If Available. state Whether Your Company Offers Facility Renovation Services Related To Installation Of The Aforementioned Equipment At Its Delivery Destination, If Required Per The Nist-identified Minimum Specifications, And Provide Description Of Services. Indicate If Your Company Performs The Facility Renovation Services Or Typically Subcontracts The Work To Another Company. Indicate If Your Company Would Be Interested Inspecting The Intended Installation Site During The Market Research Phase. state Published Price, Discount Or Rebate Arrangements For Aforementioned Equipment And/or Provide Link To Access Company’s Published Prices For Equipment And Services. state Whether The Aforementioned Equipment Is Manufactured In The United States And, If Not, State The Name Of The Country Where The Equipment Is Manufactured. identify Any Plans/possibilities For Changes In Manufacturing Location Of The Aforementioned Equipment And Provide Relevant Details. if The Aforementioned Equipment And Related Services Are Available For Purchase On Any Existing Federal Supply Schedule Contract(s) Or Other Contracts Against Which Nist May Be Able Place Orders, Identify The Contract Number(s) And Other Relevant Information. identify Any Customers In The Public Or Private Sectors In Which You Provided The Aforementioned Or Similar Equipment. Include Customer(s) Information: Company Name, Phone Number, Point Of Contact, Email Address. provide Any Other Information That You Believe Would Be Valuable For Nist To Know As Part Of Its Market Research For This Requirement. state If You Require Nist To Provide Additional Information To Improve Your Understanding Of The Government’s Requirement And/or Would Like To Meet With Nist Representatives To Discuss The Requirement And The Capabilities Of The Identified Equipment. questions Regarding This Notice questions Regarding This Notice May Be Submitted Via Email To The Primary Point Of Contact And The Secondary Point Of Contact Listed In This Notice. Questions Should Be Submitted So That They Are Received By 11:00 Am Edt On July 8, 2024. Questions Will Be Anonymized And Answered Via Sources Sought Notice Amendment Following The Question Submission Deadline. important Notes the Information Received In Response To This Notice Will Be Reviewed And Considered So That Nist May Appropriately Solicit For Its Requirements In The Near Future. this Notice Should Not Be Construed As A Commitment By Nist To Issue A Solicitation Or Ultimately Award A Contract. responses Will Not Be Considered As Proposals Or Quotations. no Award Will Be Made As A Result Of This Notice. nist Is Not Responsible For Any Costs Incurred By The Respondents To This Notice. nist Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Appropriate. thank You For Taking The Time To Submit A Response To This Request!