Tenders of National Institute Of Standards And Technology Usa

*****this Is A Combined Sources Sought Notice And Notice Of Intent To Sole Source***. background the National Institute Of Standards And Technology (nist) Is Conducting Innovative Research Through Its Nist Seri Program To Advance Measurement Science In The Realm Of Illicit Drug Identification And Quantification, As Mandated By The Tranq Research Act. As Part Of This Effort, The Microsystems And Nanotechnology Division Is Spearheading The Development Of Cutting-edge Infrared Sensors That Leverage Metamaterial Technology. These Metamaterial-based Sensors Are Specifically Designed To Operate Within The Infrared Wavelength Range Of 2 Micrometers To 11 Micrometers. This Range Includes The Highly Sensitive Molecular Fingerprint Region, Which Is Crucial For Spectroscopic Detection Of Drug Molecules. By Targeting This Spectral Region, The Sensors Aim To Achieve Precise And Reliable Detection And Identification Of Illicit Substances, Enhancing The Capabilities Of Forensic And Analytical Laboratories. nist Is Seeking Information From Sources That May Be Capable Of Providing A Solution That Will Achieve The Objectives Described Above, In Addition To The Following Essential Requirements contract Line-item Number (clin) 0001: The Contractor Shall Provide One (1) Infrared Camera the System Shall Meet Or Exceed The Technical Specifications Identified Below. All Items Must Be New. Used Or Remanufactured Equipment Will Not Be Considered For Award. Experimental, Prototype, Or Custom Items Will Not Be Considered. The Use Of “gray Market” Components Not Authorized For Sale In The U.s. By The Contractor Is Not Acceptable. the Contractor Shall Provide The Following Optical And Electrical/communication Properties That Meet The Following Minimum Specifications: instrument Package: One Camera System (not Multiple Cameras Or Camera Components To Meet Requirements) infrared Camera Requirements a) Strained-layer Superlattice (sls) Camera Sensor b) Continuously Wavelength Coverage From 2 Mm To 11 Mm. c) Camera Frame Rates Of 400 Frames/second Or Higher d) Camera Resolution Of 640x512 Pixels Or Higher pixel Pitch Of 20 Mm linear Closed-cycle Stirling Cryo-cooling Of Camera Sensor 25 Mm F/2.0 Lens camera Electrical/communication Requirements must Use 120 V Or 240 V Ac Input Power computer Communication Via Gige, Camera Link, Or Hd-sdi Interfaces syncing/triggering Options Via Coax Connections must Have 1 Year Warranty must Have Manuals For Operation software Development Kit (sdk) Is Required To Control By Pc nist Conducted Market Research From December 2024 – February 2025 By, Speaking With Colleagues, Performing Internet Searches, And Speaking With Vendors To Determine What Sources Could Meet Nist’s Minimum Requirements. The Results Of That Market Research Revealed That Only Santa Barbra Infrared (tlc5m9hq62p3) Can Meet All The Governments Minimum Requirements. how To Respond To This Notice in Responding To This Notice, Please Do Not Provide Proprietary Information. Please Include Only The Following Information, Readable In Either Microsoft Word 365, Microsoft Excel 365, Or .pdf Format, In The Response: Submit The Response By Email To The Primary Point Of Contact And, If Specified, To The Secondary Point Of Contact Listed In This Notice As Soon As Possible, And Preferably Before The Closing Date And Time Of This Notice. Please Note That To Be Considered For Award Under Any Official Solicitation, The Entity Must Be Registered And “active” In Sam At The Time Of Solicitation Response. provide The Complete Name Of Your Company, Address, Name Of Contact For Follow-up Questions, Their Email, Their Phone Number And, If Your Company Has An Active Registration In Https://sam.gov, Your Company’s Unique Entity Id (uei). details About What Your Company Is Capable Of Providing That Meets Or Exceeds Nist’s Minimum Requirements. whether Your Company Is An Authorized Reseller Of The Product Or Service Being Cited And Evidence Of Such Authorization. identify Any Aspects Of The Description Of The Requirements In The Background Section Above That Could Be Viewed As Unduly Restrictive Or Create Unnecessary Barriers That Adversely Affect Your Firm’s Ability To Fully Participate In A Procurement For Such Services And Explain Why. Please Offer Suggestions For How The Requirements Could Be Organized Or Structured To Encourage The Participation Of Small Businesses. for The Naics Code indicate Whether Your Company Is (a) A Small Business Or (b) Other Than Small Business. See The Table Of Small Business Size Standards And The Associated .pdf Download File For Small Business Size Standards And Additional Information. if You Believe The Naics Code Listed In This Notice Is Not The Best Naics Code For The Type Of Product Addressed In This Notice, Identify An Alternative Naics Code That You Believe Would Be More Appropriate For The Planned Procurement. if Your Firm Has Existing Federal Supply Schedule Contract(s) Or Other Contracts For Products Or Services Against Which The Department May Be Able To Place Orders, Identify The Contract Number(s) And Other Relevant Information. describe Your Firm’s Experience (as A Prime, Subcontractor, Or Consultant) Providing The Products Or Services Described In Background Section. provide Any Other Information That You Believe Would Be Valuable For The Government To Know As Part Of Its Market Research For This Requirement. please Let Us Know If You Would Like To Engage To Get A Better Understanding Of The Requirement Or Need Additional Information About The Government’s Requirement For The Products Or Services Described In The Background Section. questions Regarding This Notice questions Regarding This Notice May Be Submitted Via Email To The Primary Point Of Contact And The Secondary Point Of Contact Listed In This Notice. Questions Should Be Submitted So That They Are Received By April 14, 2025. If The Contracting Officer Determines That Providing A Written Amendment To This Notice To Document Question(s) Received Would Benefit Other Potential Respondents, The Questions Would Be Anonymized, And A Written Response To Such Question(s) Would Be Provided Via An Amendment To This Notice. important Notes the Information Received In Response To This Notice Will Be Reviewed And Considered So That The Nist May Appropriately Solicit For Its Requirements In The Near Future. this Notice Should Not Be Construed As A Commitment By The Nist To Issue A Solicitation Or Ultimately Award A Contract. this Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. this Notice Is Not A Request For A Quotation. Responses Will Not Be Considered As Proposals Or Quotations. no Award Will Be Made As A Result Of This Notice. nist Is Not Responsible For Any Costs Incurred By The Respondents To This Notice. nist Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Appropriate. any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization’s Capability. respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. thank You For Taking The Time To Submit A Response To This Request.

Commercial Safety Data Sheet Authoring Software

Contracting Office Address national Institute Of Standards And Technology (nist), acquisition Management Division, 100 Bureau Drive, Mail Stop 1640, gaithersburg, Md, 20899-1640 this Is A Sources Sought Notice Only. Requests For Copies Of A Solicitation Will Not Receive A Response. This Notice Is For Planning Purposes Only And Is Not A Request For Proposal Or Request For Quotation Or An Obligation On The Part Of The National Institute Of Standards & Technology (nost) For Conducting A Follow-on Acquisition. Nist Does Not Intend To Award A Contract On The Basis Of This Notice, Or Otherwise Pay For The Information Requested. No Entitlement Or Payment Of Direct Or Indirect Costs Or Charges By Nist Will Arise As A Result Of Submission Of Responses To This Notice And Nist Use Of Such Information. Nist Recognizes That Proprietary Components, Interfaces And Equipment, And Clearly Mark Restricted Or Proprietary Components, Interfaces And Equipment, And Clearly Mark Restricted Or Proprietary Data And Present It As An Addendum To The Non-restricted/non-proprietary Information. In The Absence Of Such Identification, Nist Will Assume To Have Unlimited Rights To All Technical Data In The Information Paper. no Solicitation Documents Exist At This Time. requirement the Nist Facility For Adsorbent Characterization And Testing (fact) Lab In The Chemical Sciences Division Within The Material Measurement Laboratory (mml) Aims To Serve The Sorbent Materials Research Community As An Impartial Service Source For Testing And Characterization Of Sorbent Materials, And By Establishing Reference Materials And Testing Procedures. The Fact Lab Seeks To Contribute To Gas Separation Efforts By Developing Standard Measurement Procedures And Reference Data Using Reference Materials For Dynamic Adsorption Measurements. a Breakthrough Instrument Allows For The Evaluation Of Differential Adsorption Properties Of A Porous Material Under Dynamic Conditions. Dynamic Breakthrough Data Are Especially Useful For Evaluating And Selecting Industrial Sorbents By Monitoring The Uptake Of Multiple Gases, Including Water Vapor, Which Often Competes With The Adsorption Of Common Gases. The Fact Lab Requires A Breakthrough Analyzer (bta) For Measurement Intercomparison With Existing Fact Lab Infrastructure And Externally With Stakeholders. nist Is Seeking Information On Vendors Who Could Potentially Provide The Following: sealing Materials: Compatible With Nitrogen, Carbon Dioxide, Methane And Water; pressure Range: Ambient And Up To 30 Bars; maximum Temperature: At Least 1050 °c For Outgassing And Breakthrough Measurement; number Of Gas Ports: 3 Gas Inlets 3 Mass Flow Controllers; vapor Capability: Capable Of Performing Measurements With At Least 1 Vapor (e.g. Water), Including Bubbler (50 Ml), Mfc, Blending Valve And Installations; sample Column: 0.495 Cm X 30 Cm And Can Accommodate 100 Mg To 2 G Samples; vacuum Pump: Vacuum Pump To Achieve Vacuum Level Of At Least 3 X 10-3 Mbar Able To Perform In-situ Sample Activation With Vacuum Pump, Dedicated Automatic Valve, And Installation And Integration Into Software; mass Spectrometer (ms): Detector Sensitivity: 1-200 Amu, At Least 100 Ppb Sensitivity; ir-based Water Sensor: Fully Integrated Into System And Fully Calibrated, Humidity Probe Vaisala Hmp7 (up To 10 Bar, Up To 150 ºc), Which Allows Online Measurement Of H2o Concentration In The Gas Product (0-100% Rh). Installation And Integration In Process@ Software. other Features: quasi-zero Dead-volume Blend Valves To Ensure Accurate And Consistent Mixtures (including Vapors) internal Thermostatted Enclosure To Prevent Condensation In Blend Valves, Gas Lines, Sample Furnace, And Sample Column. All Measurement Critical Components – Blend Valves, Connecting Lines, Sample Column, Etc Fully Enclosed In This Continuous, Isothermal Zone Which Can Be Heated Up To At Least 150 °c. novel Pressure Control System, Which Uses Servo (active Computer) Controlled Valves With A Range To 30 Bar And A Novel Stepper-motor That Controls The Valve To More Than 2800 Unique Positions For High-precision And Stability (no Pulsation) For Single Or Multi-phase Systems. The Valve Works Simultaneously At High Temperatures And Pressures. integration With Other Additional Sensors (e.g.ir-based Co2 Sensor) Possible In Future. other Measurement Capabilities: In Addition To Breakthrough Experiments With Multiple Gases And At Least One Vapor, Able To Perform Pressure Swing Adsorption And Temperature Swing Adsorption Experiments. pc Compatible With Instrument And Accessories And All Software Installed And Ready To Use. Pc Included. Software, The Ability To Display And Process Data (i.e. Breakthrough Curve, Determine Adsorbed Gas Amount From Breakthrough Curve), Fully Integrated With Mass Spectrometer, Vacuum Pump, And Temperature And Pressure Controllers. providing Manuals, Installation, Training, And A Warranty. interested Parties Shall Describe The Capabilities Of Their Organization As It Relates To The Item Described Above. Nist Anticipates Issuing A Request For Quotation In Third Quarter Of Fy2025 And Awarding A Contract No Later Than Fourth Quarter Fy2025. nist Is Seeking Responses From All Responsible Sources, Including Large And Small Businesses. The Small Business Size Standard Associated With The Naics Code For This Effort, 334516, Is 1000 Employees. Please Include Your Company’s Size Classification And Socio-economic Status In Any Response To This Notice. after Results Of This Market Research Are Obtained And Analyzed, Nist May Conduct A Competitive Procurement And Subsequently Award A Contract. Companies That Can Provide Such Items Are Requested To Email A Written Response Describing Their Abilities To Donald.graham@nist.gov No Later Than The Response Date For This Sources Sought Notice. the Following Information Is Requested To Be Provided As Part Of The Response To This Sources Sought Notice: name, Address, Unique Entity Id #, And Point Of Contact Information Of Your Company. any Information On The Company’s Small Business Certifications, If Applicable. description Of Your Company’s Capabilities As They Relate To The Item Described In This Notice. a Description Of Your Company’s Previous Experience Providing The Item Described In This Notice. indication Of Whether The Item Described In This Notice Are Currently Offered Via Your Company’s Gsa Federal Supply Schedule (fss) Contracts, Government-wide Acquisition Contracts (gwacs), Or Other Existing Government-wide Contract Vehicles; And, If So, The Contract Number(s) For Those Vehicles. any Other Relevant Information That Is Not Listed Above Which The Government Should Consider In Finalizing Its Market Research. responses Are Limited To A Total Of Twelve (12) Pages. The Responses Must Be In Ms Word Format. Pages Shall Be 8½-inch X 11-inch, Using Times New Roman 11 Point Font. Each Page Shall Have Adequate Margins On Each Side (at Least One Inch) Of The Page. Header/footer Information (which Does Not Include Any Information To Be Analyzed) May Be Included In The 1" Margin Space.

National Institute Of Standards And Technology (nist) acquisition Management Division sources Sought For Commercial Item Purchase this Sources Sought Is Not A Request For Quotation it Is A Market Research Tool Being Used To Determine Potential And Eligible Business Firms That Can Provide The Product Described Herein Prior To Determining The Method Of Acquisition. the National Institute Of Standards & Technology (nist) Seeks Information On Vendors That Can Obtain A Electro-optic Probe System According To The Requirements/specifications Document Attached Herein. this Announcement Is Not A Request For Quotation (rfq)and Does Not Commit The Government To Award A Contract Now Or In The Future. No Solicitation Is Currently Available. Additionally,the Government Is Not Obligated To And Will Not Pay For Any Information Received From Potential Sources Because Of This Sources Sought Announcement. The Results Of This Sources Sought Will Be Utilized To Determine If Any Small Business Set-aside Opportunities Exist. All Small Business Set-aside Categories Will Be Considered. In Addition, This Market Research Tool Is Being Used To Identify Potential And Eligible Firms, Of All Sizes, Prior To Determining The Method Of Acquisition And Issuance Of A Solicitation. because Of This Sources Sought Announcement, Nist May Conduct A Competitive Procurement On The System For Award Management (sam.gov) Website And Subsequently Award A Contract. If At Least Two Qualified Small Businesses Are Identified During This Market Research Stage That Can Fulfil The Requirement, In Accordance With The Requirement Descriptions And Technical Specifications Indicated In The Specification Document, Then This Acquisition Shall Be Solicited As A Small Business Set Aside. However, Nist Is Seeking Responses From All Responsible Sources, Including Large And Small Businesses (sb, Sdb, Wosb, Hubzone, Sdvosb And Vosb). This Requirement Is Assigned A Naics Code Of 334516 For Analytical Laboratory Instrument Manufacturing With A Small Business Size Standard Of 1000 Emp. The Specific Purpose Of This Sources Sought Announcement Is To Determine If There Are Small Businesses, Within The Parameters Identified Above, That Can Provide The Specialized Equipment Identified In The Requirements/specifications Document. interested Business Organizations That Believe They Can Meet The Requirement Should Submit Electronic Copies Of Their Capability Statement. Please Limit Responses Tofive (5) Pages Or Less. Responses Should Include The Following Information: 1. Company Profile To Include Number Of Employees, Office Location(s), Unique Entity Identifier (uei) Number And Cage Code. 2. Name Of Company That Will Provide The Product. 3. Name Of Company That Will Manufacture The Product. 4. Specification Sheets And Examples Of Products That Meet The Specifications Attached Herein. 5. Typical Lead Time To Deliver The Product After Receipt Of Award To Include Installation Time And Any Necessary Training That Is Provided. 6. Identification And Verification Of The Company’s Small Business Status. 7. Any Other Relevant Information That Is Not Listed Above Which The Government Should Consider In Developing Our Supply Or Service Requirement And Finalizing Our Market Research. 8.country Of Origin For Each Supply Or Service To Be Provided. (company Sales Brochures Or Marketing Packages Will Not Be Considered). requirements Overview: see The Attached Requirements/specifications Document.

High-energy X-ray Diffractometer With Silver Radiation

Automated Liquid Handling System For Sample Preparation

Paraview/vtk Software Enhancement Support Services

Sources Sought For Humanoid-type Robot And Associated Software

Nist-ss25-31  6640 / 513210  primary Poc: Liz Timberlake (elizabeth.timberlake@nist.gov)  secondary Poc: Tracy Retterer (tracy.retterer@nist.gov)  title:  Mountains® Software Update V10 background ***this Is A Combined Sources Sought Notice And Notice Of Intent To Sole Source*** the National Institute Of Standards And Technology (nist) Is Seeking Information From Sources That May Be Capable Of Providing Mountains® Software Update V10. If No Alternate Sources Are Identified, The Government Intends To Issue A Sole Source Award To Digital Surf (16 Rue Lavoisier Besancon, Bourgogne-france) Under The Authority Of Far 13.106-1(b) Only One Reasonably Found Source. The North American Industry Classification System (naics) Code For This Acquisition Is 513210. nist Has A Need For Mountains® Software Update V10 That Meets Or Exceeds The Following Draft Minimum Specifications: the Contractor Shall Provide 2 Copies Of Mountains® Software Update V10 That Meet The Following Minimum Specifications: the Contractor Shall Provide The Following Two Copies Of Mountains® Software Update V10 (one Network And One Local) That Meet The Following Minimum Specifications: contains 2d And 3d Surface Parameters From Iso 25178, Iso 4287, Iso 21290, And Asme B46.1. contains Iso 16610 Filter Operations. contains A Contour Analysis Module For Microform Geometries. contains Analysis Template/macros Compatible With Mountains® Software V7 contains Read Access To *.nms, *.prf, *.mod, *.al3d, *.datx, *.x3p File Formats. nist Conducted Market Research From January Through March Of 2025 By Attending Conferences, Speaking With Colleagues, Performing Internet Searches, And Speaking With Vendors To Determine What Sources Could Meet Nist’s Minimum Requirements. The Results Of That Market Research Revealed That Only Digital Surf Appears To Be Capable Of Meeting Nist’s Requirements. how To Respond To This Notice in Responding To This Notice, Please Do Not Provide Proprietary Information. Please Include Only The Following Information, Readable In Either Microsoft Word 365, Microsoft Excel 365, Or .pdf Format, In The Response. Submit The Response By Email To The Primary Point Of Contact And, If Specified, To The Secondary Point Of Contact Listed At The Bottom Of This Notice As Soon As Possible, And Preferably Before The Closing Date And Time Of This Notice. provide The Complete Name Of Your Company, Address, Name Of Contact For Follow-up Questions, Their Email, Their Phone Number And, If Your Company Has An Active Registration In Https://sam.gov, Your Company’s Unique Entity Id (uei). details About What Your Company Is Capable Of Providing That Meets Or Exceeds Nist’s Minimum Requirements. whether Your Company Is An Authorized Reseller Of The Product Or Service Being Cited And Evidence Of Such Authorization. identify Any Aspects Of The Description Of The Requirements In The Background Section Above That Could Be Viewed As Unduly Restrictive Or Create Unnecessary Barriers That Adversely Affect Your Firm’s Ability To Fully Participate In A Procurement For Such Services And Explain Why. Please Offer Suggestions For How The Requirements Could Be Organized Or Structured To Encourage The Participation Of Small Businesses. for The Naics Code indicate Whether Your Company Is (a) A Small Business Or (b) Other Than Small Business.  See The Table Of Small Business Size Standards And The Associated .pdf Download File For Small Business Size Standards And Additional Information. if You Believe The Naics Code Listed In This Notice Is Not The Best Naics Code For The Type Of Product Addressed In This Notice, Identify An Alternative Naics Code That You Believe Would Be More Appropriate For The Planned Procurement.  if Your Firm Has Existing Federal Supply Schedule Contract(s) Or Other Contracts For Products Or Services Against Which The Department May Be Able To Place Orders, Identify The Contract Number(s) And Other Relevant Information. describe Your Firm’s Experience (as A Prime, Subcontractor, Or Consultant) Providing The Products Or Services Described In Background Section. provide Any Other Information That You Believe Would Be Valuable For The Government To Know As Part Of Its Market Research For This Requirement. please Let Us Know If You Would Like To Engage To Get A Better Understanding Of The Requirement Or Need Additional Information About The Government’s Requirement For The Products Or Services Described In The Background Section.  questions Regarding This Notice questions Regarding This Notice May Be Submitted Via Email To The Primary Point Of Contact And The Secondary Point Of Contact Listed In This Notice. Questions Should Be Submitted So That They Are Received By 12:00pm Eastern Time On May 3, 2025. Questions Will Be Anonymized And Answered Via Sources Sought Notice Amendment Following The Question Submission Deadline. important Notes the Information Received In Response To This Notice Will Be Reviewed And Considered So That The Nist May Appropriately Solicit For Its Requirements In The Near Future. this Notice Should Not Be Construed As A Commitment By The Nist To Issue A Solicitation Or Ultimately Award A Contract. this Notice Is Not A Request For A Quotation. Responses Will Not Be Considered As Proposals Or Quotations. no Award Will Be Made As A Result Of This Notice. nist Is Not Responsible For Any Costs Incurred By The Respondents To This Notice. nist Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Appropriate. thank You For Taking The Time To Submit A Response To This Request!

Pfeiffer Vacuum Hipace 1200 Turbo Pump Package Dn 200 Cf-f, Tc 1200 With Omnicontrol 001, Model Number 2000017993