Tenders of National Institute Of Standards And Technology Usa

Background the Nist Applied Electrical Metrology Group Provides A Measurement Service For Wideband Ac Voltmeters And Is Extending The Frequency Range From 30 Mhz To 50 Mhz. We Require A Wideband Meter That Has Capability Of Wideband 50 Ohm Input Voltages From 1 Mhz To 50 Mhz With Voltage Ranges From 2.2 Mv To 7 V. The Item Must Also Have The Capability For Low Frequency Voltages From 10 Hz To 100 Khz With Voltage Ranges From 2.2 Mv To 1000v. nist Is Seeking Information From Sources That May Be Capable Of Providing A Commercial Item Solution That Meets Or Exceeds The Following Draft Minimum Specifications: clin 001: Ac Measurement Standard + 50 Mhz Wideband Option Calibrated With Wb Cable voltage Range: 2.2 Mv-1000 Volts For 10 Hz To 100 Khz Frequency Range wideband Voltage Range: 2.2 Mv- 7 V For 1 Mhz To 50 Mhz Frequency Range voltage Accuracy Of 0.06% At 2.2 Mv @1khz voltage Accuracy Of 0.006% At 1000v @ 1khz voltage Flatness Of 1.2% At 2.2 Mv @ 50 Mhz voltage Flatness Of 0.7% At 5v @ 50 Mhz how To Respond To This Notice in Responding To This Notice, Please Do Not Provide Proprietary Inforrmation. Please Include Only The Following Information, Readable In Either Microsoft Word 365, Microsoft Excel 365, Or .pdf Format, In The Response: Submit The Response By Email To The Primary Point Of Contact And, If Specified, To The Secondary Point Of Contact Specialist Listed At The Bottom Of This Notice As Soon As Possible, And Preferably Before The Closing Date And Time Of This Notice. provide The Complete Name Of Your Company, Address, Name Of Contact For Follow-up Questions, Their Email, Their Phone Number And, If Your Company Has An Active Registration In Https://sam.gov, Your Company’s Unique Entity Id (uei). identify Laboratory Equipment That Your Company Sells That Is Of The Nature Addressed In The Background Section Of This Notice. Include Brand Name, Make, Model, And/or Other Distinguishing Information. state If Your Company Is The Manufacturer Of The Identified Equipment Or Is A Retailer Or Wholesaler That Normally Sells The Identified Equipment. If The Latter, Indicate Whether The Manufacturer Authorized In Writing For Your Company To Sell The Identified Equipment On Behalf Of The Manufacturer. describe Performance Capabilities And Relevant Or Beneficial Physical And Functional Features For Any Equipment You Identified To Satisfy The Nist-identified Minimum Specifications Described In This Notice. identify Any Aspects Of The Nist Market Research Notice, Including Instructions, And Draft Minimum Specifications In The Background Section Above That Could Be Viewed As Unduly Restrictive Or Contain Unnecessary Barriers That Adversely Affect Your Ability To Fully Participate And Indicate Why. In Such A Scenario, Please Offer Suggestions For How The Market Research Notice And Draft Minimum Specifications Could Be Made More Inclusive And Competitive. discuss Whether The Equipment That Your Company Sells And Which You Describe In Your Response To This Notice May Be Customized To Specifications And Indicate Any Limits To Customization. for The Naics Code Listed In This Notice: indicate Whether Your Company Is (a) A Small Business Or (b) Other Than Small Business. See The Table Of Small Business Size Standards And The Associated .pdf Download File For Small Business Size Standards And Additional Information. if You Believe The Naics Code Listed In This Notice Is Not The Best Naics Code For The Type Of Product Addressed In This Notice, Identify An Alternative Naics Code That You Believe Would Be More Appropriate For The Planned Procurement. describe Services That Are Available With The Purchase Of The Aforementioned Equipment From Your Company Such As Installation, Training, And Equipment Maintenance. describe Standard Terms And Conditions Of Sale Offered By Your Company For The Aforementioned Equipment Such As: Delivery Time After Your Company Accepts The Order; Fob Shipping Terms: Manufacturer Warranty (including Details Regarding Nature And Duration); If Available, Description(s) Of Available Extended Warranty; Equipment Setup And Test; Operator And Service Instruction Manual(s); Cleanup After Installation; And If Applicable, Other Offered Services. Provide A Copy Of Manufacturer Standard Terms And Conditions That Typically Relate To The Sale Of The Specified Equipment, If Available. state Whether Your Company Offers Facility Renovation Services Related To Installation Of The Aforementioned Equipment At Its Delivery Destination, If Required Per The Nist-identified Minimum Specifications, And Provide Description Of Services. Indicate If Your Company Performs The Facility Renovation Services Or Typically Subcontracts The Work To Another Company. Indicate If Your Company Would Be Interested Inspecting The Intended Installation Site During The Market Research Phase. state Published Price, Discount Or Rebate Arrangements For Aforementioned Equipment And/or Provide Link To Access Company’s Published Prices For Equipment And Services. state Whether The Aforementioned Equipment Is Manufactured In The United States And, If Not, State The Name Of The Country Where The Equipment Is Manufactured. identify Any Plans/possibilities For Changes In Manufacturing Location Of The Aforementioned Equipment And Provide Relevant Details. if The Aforementioned Equipment And Related Services Are Available For Purchase On Any Existing Federal Supply Schedule Contract(s) Or Other Contracts Against Which Nist May Be Able Place Orders, Identify The Contract Number(s) And Other Relevant Information. identify Any Customers In The Public Or Private Sectors In Which You Provided The Aforementioned Or Similar Equipment. Include Customer(s) Information: Company Name, Phone Number, Point Of Contact, Email Address. provide Any Other Information That You Believe Would Be Valuable For Nist To Know As Part Of Its Market Research For This Requirement. state If You Require Nist To Provide Additional Information To Improve Your Understanding Of The Government’s Requirement And/or Would Like To Meet With Nist Representatives To Discuss The Requirement And The Capabilities Of The Identified Equipment. questions Regarding This Notice questions Regarding This Notice May Be Submitted Via Email To The Primary Point Of Contact And The Secondary Point Of Contact Listed In This Notice. Questions Should Be Submitted So That They Are Received 5 Days Prior To The Response Date Of This Notice. Questions Will Be Anonymized And Answered Via Sources Sought Notice Amendment Following The Question Submission Deadline. important Notes the Information Received In Response To This Notice Will Be Reviewed And Considered So That Nist May Appropriately Solicit For Its Requirements In The Near Future. this Notice Should Not Be Construed As A Commitment By Nist To Issue A Solicitation Or Ultimately Award A Contract. responses Will Not Be Considered As Proposals Or Quotations. no Award Will Be Made As A Result Of This Notice. nist Is Not Responsible For Any Costs Incurred By The Respondents To This Notice. nist Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Appropriate. thank You For Taking The Time To Submit A Response To This Request!

Sequestered Examiner Palm Quality Assessment, Feature Extraction, And Correspondence Support Services

Purpose the Purpose Of This Sources Sought Notice Is To Conduct Market Research And Identify Potential Sources Of Commercial Products/services That Satisfy The Government’s Anticipated Needs. background the National Institute Of Standards And Technology (nist), Mobility Performance Of Robotic Systems Project, Under The Engineering Laboratory (el), Has Developed Initial Performance Metrics To Quantitatively Evaluate The Relative Benefits Of Exoskeleton Capabilities For Industrial Use Of Exoskeletons. Presently, Nist Only Owns Passive Exoskeletons Which Hinders Data Collection And Validation Of Test Methods For Exoskeletons. Nist Requires An Active Exoskeleton To Continue Current Work Under The Nist Exoskeleton Research Study, Irb El-2018-0060. Ongoing Use Of A Nist-owned Exoskeleton Is Essential To Practically Schedule And Conduct Inter-laboratory Experiments To Establish The “reproducibility” Of Nist-developed Apparatuses And Test Procedures. An Added Benefit Would Be To Enhance Communications With Stakeholders, Including The General Public During Tours, Using Hands-on Demonstrations Within Relevant Test Apparatuses. nist Is Seeking Information From Sources That May Be Capable Of Providing A Solution That Will Achieve The Objectives Identified In This Notice. anticipated Requirements the Contractor Shall Provide An Active Rigid Exoskeleton Meeting The Following Specifications: a. Quantity One (1) Active Exoskeleton: the Equipment Shall Have The Following Minimum Salient Characteristics: o Active Rigid Exoskeleton With Unibody Construction That Supports The Back And Spine Providing A Safer Ergonomic Motion. o Quick On/off Donning And Doffing In Less Than 30 Seconds. o Adjustable Design To Fit A Wide Range Of Body Types. o Washable, Breathable Vests And Leg Pads o Battery-powered Exoskeleton With Dual Motors That Deliver Up To 80 Lbs. Of Lifting Force. o Lift Support 66lbs Or Greater o The Motor Torque Is User Adjustable Via A Control Panel. o Ability For Report Lifts, Weight Compensation, Safety Data, Steps, Session Data Which Is Gdpr Compliant. o Service Data Tracking o Smart Sensors To Collect Ergonomics Data o Real Time Monitoring Of Usage o Real Time Monitoring Of Safety (analytics For Risks) o Four Modes Of Operation Include: Lifting, Setting Resistance , Walking Propulsion And Hover Mode. o Safety Ai Monitors And Alerts The User Of Dangerous Lifting Motions. o Iso 13482 Compliant For Safety Of Personal Robots o Training Through A Virtual Means, To Include Operations, Maintenance, Troubleshooting And Safety Of The Exoskeleton. how To Respond To This Notice in Responding To This Notice, Please Do Not Provide Proprietary Information. Please Include Only The Information Described Below, Readable In Either Microsoft Word 365, Microsoft Excel 365, Or Adobe .pdf Format. submit The Response By Email To The Primary Point Of Contact And, If Specified, To The Secondary Point Of Contact Listed In This Notice As Soon As Possible, And Preferably Before The Closing Date And Time Of This Notice, August 5, 2024, At 11:00 Am Et. Please Note That To Be Considered For Award Under Any Official Solicitation, The Entity Must Be Registered And “active” In Sam At The Time Of Solicitation Response. “id Assigned” Is Not Acceptable. • Provide The Complete Name Of Your Company, Address, Name Of Contact For Follow-up Questions, Their Email, Their Phone Number And, If Your Company Has An Active Registration In Https://sam.gov, Your Company’s Unique Entity Id (uei). • Identify The Equipment That Your Company Sells That Can Meet The Objectives Addressed In The Background Section Of This Notice. For Each Product Recommended To Meet The Government’s Requirement, Provide The Following: o Manufacturer Name o Model Number o Technical Specifications o If Your Company Is Not The Manufacturer, Provide Information On Your Company’s Status As An Authorized Reseller Of The Product(s) • Describe Performance Capabilities Of The Product(s) Your Company Recommends To Meet The Government’s Requirements. Additionally, If There Are Other Features Or Functions That You Believe Would Assist Nist In Meeting Its Objectives Described Above, Please Discuss In Your Response. o Discuss Whether The Equipment That Your Company Sells And Which You Describe In Your Response To This Notice May Be Customized To Specifications And Indicate Any Limits To Customization. • Identify Any Aspects Of The Nist Market Research Notice, Including Instructions, And Draft Minimum Specifications In The Background Section You Cannot Meet And State Why. Please Offer Suggestions For How The Market Research Notice And Draft Minimum Specifications Could Be Made More Competitive. • State Whether The Proposed Equipment Is Manufactured In The United States And, If Not, State The Name Of The Country Where The Equipment Is Manufactured. • Identify Any Plans/possibilities For Changes In Manufacturing Location Of The Aforementioned Equipment And Provide Relevant Details, Including Timeline. • For The Naics Code Listed In This Notice: o Indicate Whether Your Company Is (a) A Small Business Or (b) Other Than Small Business. See The Table Of Small Business Size Standards And The Associated .pdf Download File For Small Business Size Standards And Additional Information. o If You Believe The Naics Code Listed In This Notice Is Not The Best Naics Code For The Type Of Product Addressed In This Notice, Identify An Alternative Naics Code That You Believe Would Be More Appropriate For The Planned Procurement. • Describe Standard Terms And Conditions Of Sale Offered By Your Company For The Recommended Equipment Such As: Delivery Time After Your Company Accepts The Order; Fob Shipping Terms; Manufacturer Warranty (including Details Regarding Nature And Duration); If Available, Description(s) Of Available Extended Warranty; Equipment Setup And Test; Operator And Service Instruction Manual(s); Cleanup After Installation; And If Applicable, Other Offered Services. Provide A Copy Of Manufacturer Standard Terms And Conditions That Typically Relate To The Sale Of The Specified Equipment, If Available. • If The Recommended Equipment And Related Services Are Available For Purchase On Any Existing Federal Supply Schedule Contract(s) Or Other Contracts Against Which Nist May Be Able To Place Orders, Identify The Contract Number(s) And Other Relevant Information. • Provide Any Other Information That You Believe Would Be Valuable For Nist To Know As Part Of Its Market Research For This Requirement. • State If You Require Nist To Provide Additional Information To Improve Your Understanding Of The Government’s Requirement And/or Would Like To Meet With Nist Representatives To Discuss The Requirement And The Capabilities Of The Identified Equipment. questions Regarding This Notice questions Regarding This Notice May Be Submitted Via Email To The Primary Point Of Contact And The Secondary Point Of Contact Listed In This Notice. Questions Should Be Submitted So That They Are Received By July 31, 2024. If The Contracting Officer Determines That Providing A Written Amendment To This Notice To Document Question(s) Received Would Benefit Other Potential Respondents, The Questions Would Be Anonymized, And A Written Response To Such Question(s) Would Be Provided Via An Amendment To This Notice. important Notes this Notice Is For Market Research Purposes And Should Not Be Construed As A Commitment By Nist To Issue A Solicitation Or Ultimately Award A Contract. There Is No Solicitation Available At This Time. this Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. nist Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization’s Capability. respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. after A Review Of The Responses Received, A Synopsis And Solicitation May Be Published On Gsa’s Ebuy Or Sam.gov. However, Responses To This Notice Will Not Be Considered An Adequate Response To Any Such Solicitation(s). the Responses Shall Not Exceed Five (5) Pages Including All Attachments, Charts, Etc. thank You For Taking The Time To Submit A Response To This Request!

Notice Of Intent To Sole Source - Repair - Proprietary Short-wave Infrared (swir) Camera

Standard Reference Material (srm) 1950a Metabolites In Frozen Human Plasma

Elevator Torqmax/inverter Drives

Sources Sought: Brand Name Or Equal Leica Blk2go Handheld Imaging Laser Scanner System

Micropore Gas Sorption Surface Analyzer

Two (2) Ultrastable Near-infrared Lasers

Notice Of Intent To Sole Source: Electron Multiplication Charge Coupled Device (emccd) Camera