MUNICIPALITY OF SAN MANUEL, ISABELA Tender

Description No. Item Description Unit Quantity Part A-general Requirements A.1 Mobilization And Demobilization L.s 1. 00 A.2 Project Billboard/ Signboard Set 1. 00 A.3 Provision Of Progress Photographs Months 3. 00 A.4 Occupational Safety And Health Months 3. 00 A.5 Temporary Power-generator Set (including Fuel And Lubricants) Lot 1. 00  Note: Purchased Generator Set Shall Be Turnover To Lgu-san Manuel Upon Completion Of Project Part B- Earthworks B.2 Excavation (common Soil) Cu.m 13. 50 B.3 Gravel Bedding Cu.m 6. 00 B.4 Backfill Cu.m 9. 20 Part C- Structural / Civil Works C.2 Concrete Works Column Footing Cu.m 1. 60 Slab On Grade Cu.m 15. 00 Grade Beam Cu.m 2. 40 Column Cu.m 3. 02 Roof Beam Cu.m 2. 40 Rc Ledge Cu.m 0. 50 Equipment Foundation Cu.m 1. 45 Stiffener Column Cu.m 0. 14 100 Mm Thk. Drying Pavement Cu.m 3. 60 C.3 Rebar Works Footing Kg 126. 20 Column Kg 409. 64 Roof Beam Kg 491. 85 Slab On Grade Kg 343. 19 Grade Beam Kg 415. 75 Rc Ledge Kg 44. 44 Equipment Foundation Kg 256. 00 Stiffener Column Kg 14. 15 100 Mm Thk. Drying Pavement Kg 82. 70 C.4 Forms And Scaffoldings Column Sq.m 40. 32 Roof Beam Sq.m 32. 00 Equipment Foundation Sq.m 8. 64 Rc Ledge Sq.m 6. 10 Stiffener Column Sq.m 14. 15 C.5 Masonry Works 100 Mm Thk. Chb Wall (interior Wall) Sq.m 57. 43 Cement Plaster Finish Sq.m 124. 26 C.6 Structural Steel Works Rafter Kg 763. 02 Purlins And Facia Kg 908. 09 Steel Beam Kg 369. 64 C.7 Tinsmitting Works Installation Of 4” Spandrel (beige) Lm 44. 00 Roofing, Pre-painted Metal Sheets, Rib Type Long Span, 0.5m Sq.m 144. 00 Walling Pre-painted Metal Sheets, Rib Type Sq.m 16. 92 Part D- Architectural Works D.5 Painting Works Semi Gloss Latex Paint (2-coat) On Interior And Exterior Cement Sq.m 124. 26 D.6 Metal Works Wall Framing 1 & Grilles Sq.m 34. 56 Wall Framing 2 Sq.m 17. 03 Project Marker, Brass,8.5-inch Width X 11 Inches Height Lot 1. 00 Pre-fab Steel Accordion Door (complete Accessories) Sq.m 11. 35 Part F- Electrical Works F.1 Panel Board And Accessories Ls 1. 00 F.2 Wires And Device Ls 1. 00 F.3 Rough-ins Ls 1. 00