Medicine Tenders

Details: Description Republic Of The Philippines Department Of Health Caraga Regional Hospital Surigao City Ooooooooo @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Bids And Awards Committee Invitation To Bid Ib No. 2024-01-15 (114) Supply And Delivery Of Various Cartridges And Filtering Materials For Hemodialysis Under Single-year Framework Agreement ( Early Procurement Activity ) Approved Budget For The Contract: Php 6,166,500.00 ========================================================= 1. The Caraga Regional Hospital (crh), Through The Fy2025 Raf / Gaa Intends To Apply The Sum Of Being The Approved Budget For The Contract (abc) Of Six Million One Hundred Sixty Six Thousand Five Hundred Pesos Only ( Php 6,166,500.00 ) As To Payment Under The Contract For Supply And Delivery Of Medicines And Fluids For Hemodialysis Under Single-year Framework Agreement (early Procurement Activity). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening And Items Below Are Subject For A Competitive Bidding As Framework Agreement List. This Is A Lot Bid. Item No Description Qty Unit Of Measure Unit Cost Total Cost Lot 1 Hemodialysis Supplies 1 Bicarbonate Cartridge 12,000 Pcs 324 ₱3,888,000.00 650gm 36 Months Shelf Compatible For B-bruan Machine Total ₱3,888,000.00 Lot 2 Ro Supplies 2.1 Ro Membrane 4021 10 Pcs 15,000.00 ₱150,000.00 Size (approximate): 4" Dia. X 21"l Flow Rate: 900 Gpd (3.41 M³/d) Applied Pressure: 225 Psig (15.5 Bar) Stabilized Salt Rejection: 99.5% Active Surface Area: 36 Sq. Ft. Single Element Recovery: 8% Exterior: Tape-wrapped Membrane Type: Polyamide Thin-film Composite Maximum Operating Temperature: 113°f (45°c) Maximum Operating Pressure:600 Psig (41 Bar) Maximum Pressure Drop:13 Psig (0.9 Bar) Maximum Feed Flow Rate:14 Gpm (3.2m³/h) Ph Range, Continuous Operation*:2-11 Ph Range, Short-term Cleaning**:1-13 Maximum Feed Silt Density Index:5 Fere Clorine Tolerance***: <0.1ppm 2.2 Ro Membrane 4040 10 Pcs 15,000.00 ₱150,000.00 Size 100*100*1000mm Membrane Type: T.f.c Effctive Membrane Area: 7.2m2 Test Pressure: 15.5bar Capacity 2500gpd Part Number Dry (wet) 356603 / (356602) Feed Spacer Thickness (mil) 28 Active Area – Ft2 (m2) 94 (8.7) Permeate Flow Rate Gpd (m3/d) 2500 (9.5) Min. Salt Rejection (%) 99.1 Stabilized Salt Rejection (%) 99.2 2.3 Uv Lamp 2gpm 10 Pcs 4,000 ₱40,000.00 2gpm Approximate Flow Rate: 453 Liters / Hour. Input / Output: 1/2 “npt Male. Maximum Pressure: 8,61 Bar. Average Life Of Use: 8,000 Hours Or 1 Year. Material: Stainless Steel Aisi-304. Includes Transformer 220-240v 50/60 Hz 0.13a. 2.4 Uv Lamp 12gpm 10 Pcs 6,000 ₱60,000.00 12gmp Dimension 3"x40" Flow Rate (gpm) 12 Electrical 110-130v/50-60 Hz Maximum Operating Pressure 125 Psi Lamp Life 9000 Hrs ( Approx. 1 Year Of Use) Audible Lamp Failure Yes Led "power-on" Indicator Yes 2.5 Industrial Salt 250 Sack 600 ₱150,000.00 Moisture 0.6-1.5 % Purity (nacl) Min. 98.5-99 % Water Insoluble Matter 0.33 % So4 0.23 % Ca 0.06 % Mg 0.11 % Cu 0.01 % K 0.02 % Caso4 0.2 % Mgso4 0.11 % Mgcl2 0.36 % 5-6mm Max. 3 % 3-5mm 20-40 % 1-3mm 20-40 % +0.8mm 10-15 % -0.8mm Max. 3 % Yps Anti-caking Agent 80-100 Ppm Granulation 0-3, 0-5, 3-12, 0-12mm 2.6 Sediment Filter Sl 10” 1 Micron 200 Pcs 264 ₱52,800.00 Material: Food-grade Polypropylene Fibers Size: 10sl Filter Fineness 1mm Length 10" Width: 2.7cm 2.7 Sediment Filter Sl 10” 5.0 Micron 200 Pcs 216 ₱43,200.00 Filter Micron: 10 Material: Polypropylene (pp) Length: 10" (25.4 Cm) Diameter: 2.35" (6 Cm) 2.8 Sediment Filter 5 Micron Bb20 200 Pcs 660 ₱132,000.00 Dia:4.5inch Height: 20inch 2.9 Sediment Filter 1 Micron Sl20 200 Pcs 660 ₱132,000.00 Filter Micron: 1 Material: Polypropylene (pp) Length: 20" Diameter: 2.5 2.10 Sediment Filter 0.2 Micron Sl20 200 Pcs 660 ₱132,000.00 Filter Micron: 0.2 Material: Polypropylene (pp) Length: 20" Diameter: 2.5 2.11 Carbon Block Filter Cartridge Sl20 200 Pcs 1,740.00 ₱348,000.00 Filter Media：100 % Coconut Shell Carbon Dimensions： Standard Type: 28 X 1 Mm Id, 67 X 1.5 Mm Od:20” L 2.12 Water Softener Cartridge Sl20 200 Pcs 1,740.00 ₱348,000.00 Reduced By Ion Exchange Water Hardness Scale Removal Make Hard Water Into Soft Water To Avoid Drinking Hard Water Body With Stones Material: Resin Size: 20” 2.13 Absolute Filter Sl 10 0.2 Micron 200 Pcs 1,620.00 ₱324,000.00 0.2 Micron Absolute Pleated Filter Cartridge To Fit All Sl10 Standard-size Housing (2.5" X 10") Total ₱1,390,000.00 Lot 3 Hemoperf Cartridge 3.1 Hemoperfusion Cartridge Ha 130 30 Pcs 8,950.00 ₱268,500.00 Ha130 Disposable Hemoperfusion Cartridge Adsorbentvolume(ml) : 130 Biocompatibility : Tested Required In Iso10993 Adsorbent Material: Double Cross-linked Styrene-divinylbenzene Compolymers Housing Material: Polycarbonate Sterilization Method: Lrradiation Sterilization Unit Package: 195+2mm(l)*110+2mm(w)*110.5+2mm(h) 3,2 Hemoperfusion Cartridge Ha 230 5 Pcs 22,000.00 ₱110,000.00 Ha230 Disposable Hemoperfusion Cartridge Adsorbentvolume(ml) : 130 Biocompatibility : Tested Required In Iso10993 Adsorbent Material: Double Cross-linked Styrene-divinylbenzene Compolymers Housing Material: Polycarbonate Sterilization Method: Lrradiation Sterilization Unit Package: 232+2mm(l)*114+2mm(w)*114+2mm(h) 3.3 Hemoperfusion Cartridge Ha 330 15 Pcs 34,000.00 ₱510,000.00 Ha330 Disposable Hemoperfusion Cartridge Adsorbentvolume(ml) : 130 Biocompatibility : Tested Required In Iso10993 Adsorbent Material: Double Cross-linked Styrene-divinylbenzene Compolymers Housing Material: Polycarbonate Sterilization Method: Lrradiation Sterilization Unit Package: 285+2mm(l)*117+2mm(w)*108+2mm(h) Total ₱888,500.00 Grand Total ₱6,166,500.00 Terms Of Reference Bidders Must Submit The Following During Post-qualification: 1 Samples If Offered Item Is Not Previously Procured Or If Required By The Procuring Entity 2 Brochures Indicating Specification 3 Terms Of Delivery: 15 Calendar Days Upon Receipt Of Call-off 4 Delivery Schedule: Upon Call Off 5 This Procurement Is Under Framework Agreement -single Year Framework Agreement 6 Terms Of Payment. Payment Shall Be Made Upon Complete Delivery Per Call – Off. Necessary Documents Are Required In Compliance With Auditing Rules And Regulations. 7 This Procurement Is Lot Bid – Single Lot And Awarded In One Contract. Bidder Shall Bid All The Items In A Lot. 8 Product Expiration Date Must Be At Least 6 Months To 1 Year From Date Of Delivery 9 Validity Of The Contract / Contract Termination 10 Without Prejudice To The Provision Of Applicable Laws, Rules And Guidelines, The Contract Shall Be Automatically Terminated Under The Following Conditions: 11 A. When The Total Quantity Specified In The Contract Has Been Exhausted Within A Single Year 12 B. For Any Justifiable Reason Ground Where The Contract Will Not Redound To The Benefit Of The Government Or There Is Violation Of The Contract. 13 Repeat Order: 14 1. No Repeat Order For An Item In Contract Being Awarded Shall Be Allowed Until After The Procuring Entity Has Exhausted The Estimated Quantity For The Same Item Specified Therein Or After The Contract Has Expired, Whichever Comes First, And Subject To The Conditions Provided In Section 51 Of Ra 9184 And Its Irr. For This Purpose, The Repeat Order Shall Be Availed Of Only Within Six (6) Months From The Date Of The Last Of Final Delivery Order Contract For A Specific Item Where The Estimated Quantity Has Been Exhausted, Or The Expiration Of The Contract. 15 2. In Case Repeat Order Is Allowed And Resorted To, The Twenty-five (25%) Maximum Allowable Quantity Shall Be Based On The Aggregate Quantity Of Actual Items Ordered And Delivered. 16 General Conditions 17 All Other Rules Governing Contract Implementation And Termination Under Ra 9184 And Its Irr, And Relevant Procurement Policies Shall Be Applicable. Technical Specification And Terms Of Reference Are Hereby Posted In Philgeps And Form An Integral Part Of This Invitation To Bid. 2. The Crh Now Invites Bids For The Procurement Of The Above-captioned Project. Delivery Of The Goods Is Required Within The Period Specified Under Section Vi (schedule Of Requirements). Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. Section 23.4.1.3.(ra 9184). The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty Five Percent ( 25% ) Of The Abc. Slcc Must Be Within 2 Years From The Submission Of Bids. (based On The Completion Date). The Single Largest Completed Contract (slcc) Must Pertain To Hemodialysis Supplies Or Medical Supplies Or A Similar In Nature, As Determined And Defined By The Bids And Awards Committee ( Bac ). For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: A. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And B. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Nondiscretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee (bac) Secretariat, Caraga Regional Hospital, Surigao City And Inspect The Bidding Documents At The Address Given Above During 8:00 Am – 5:00 Pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 29, 2024 To January 15. 2025 On Or Before 10:00 A.m. From The Address Above And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Specified Below: Bidding Schedule Pre-bidding Conference December 9, 2024 At 2:00 P.m. Via Zoom Platform Link: Join Zoom Meeting Https://us06web.zoom.us/j/86588532546?pwd=z6l92bxp5um395pdgzmejhiz1thly9.1 Meeting Id: 865 8853 2546 Passcode: 188233 Deadline Of Submission Of Bids January 15, 2025 At 10:00 A.m... Via Online And Submit Your Bidding Documents To This Email Address: Crhbac2020@gmail.com. Please Be Advised That Failure To Submit Bidding Documents To The Designated Official Email Address Will Result In Automatic Rejection And Disqualification. Opening Of Bids January 15, 2025 At 2:00 P.m. Via Zoom Platform Join Zoom Meeting Https://us06web.zoom.us/j/82209192664?pwd=ofzrjrf2nipkrnbna9ziqj6xqjea6l.1 Meeting Id: 822 0919 2664 Passcode: 481797 Complete Philippine Bidding Documents Please Click The Link Below: Https://drive.google.com/drive/folders/1pt6urjgywj9uetpvfbbyig7x0stk0sxl?usp=sharing Amount Of Bidding Documents: Lot 1: Php 5,000.00 Lot 2: Php 5, 000.00 Lot 3: Php 1,000.00 This Bidding Document Fee Is Only Applicable If A Bidder Will Only Bid One Lot. However, Bidder Who May Participate All The Lots, Bidding Documents Is Amounting To Php 10,000.00. Payment Of The Bidding Documents Is Non-refundable It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Following Phlippine Bidding Documents Can Be Accessed In The Philgeps And All Form And Part Of This Invitation To Bid, To Wit: A. Technical Specification / Terms Of Reference/ List Of Items B. Instruction To Bidders: B.1. Documents To Be Submitted (checklist- This Will Be Discussed During The Pre-bid Conference) B.2. Memorandum Of Undertaking – Provision Thereof Is Strictly Implemented C. Guidelines On The Conduct Of The Electronic Submission And Receipt Of Bids By The Procuring Entity – Caraga Regional Hospital (crh) D. Philippine Bidding Documents E. Framework Agreement Guidelines F. Framework Agreement Lists G. Other Documents Essential Documents Required By This Procuring Entity And Ra 9184 6. The Crh Will Hold A Pre-bid Conference On The Above-mentioned Date, Time And Venue, Which Shall Be Opened To Prospective Bidders. The Pre-bidding Conference And Opening Of Bids Shall Be Conducted Through Videoconferencing, Webinar Or Virtual. Please Send Your Intent To Participate To Our Email Address As Provided Below. 7. Bids Must Be Duly Received By The Bac Secretariat At Via Designated Email On Or Before January 15, 2025 At 10:00 O’clock In The Morning. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On January 15, 2025 At 2:00 O’clock In The Afternoon At The Bac Conference Room, Beside Procurement Office, Caraga Regional Hospital, Rizal Street, Surigao City As Virtual / Electronic Bidding Via Zoom Platform. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above. Late Bids Shall Not Be Accepted Under Any Circumstances May It Cause. 8. Furthermore, The Standard Philippine Bidding Document (pbd) Is Form And Part Of This Invitation In Accordance To Ra 9184 And Other Applicable Laws, Rules And Policy. 9. The Crh Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. The Opening And Receipt Of Bids Is Strictly Implemented Through Electronic Submission. Given The Covid-19 Pandemic, Procurement Activity Has Been Expedient And One Of This Is The Conduct Of Electronic Submission Of Bids. The Crh Thru The Bids And Awards Committee (bac) Has Submitted Certification, Certified By The Highest Official Managing The Information Technology, Describing The Electronic System Or Procedure To Be Used By The Crh For The Electronic Submission And Receipts Of Bids And A Statement That The Same Is Compliant With The Gppb Resolution No. 12-2020 Requirements. 11. Bidding Documents Shall Be Emailed To This Email Address, With Activated Password To: Crhbac2020@gmail.com. You May Deposit On Line For The Payment Of The Bidding Documents To This Account Below: Bank Name: Land Bank Of The Philippines Account Name: Caraga Regional Hospital-trust Fund Account Number: 0982 -1288 – 70 12. Furthermore Deposit Slip Shall Be Submitted Via Email To: Crhprocurement.bac@gmail.com 13. The Procuring Entity Will No Longer Accept Nor Entertain Any Form Of Bids Submission Except Electronic. Failure To Comply Electronic Submission Will Be Immediately Disqualified. Guideline On The Electronic Submission Is Hereby Attached. 14. Join The Caraga Regional Hospital Supplier Network By Filling Out The Registry Form From This Link : Https://bit.ly/crh_suppliersregistry 15. For Further Information, Please Inquire To: Bac Secretariat Caraga Regional Hospital. Rizal Street, Surigao City Tel. Nos. (086) 826-1575 Local 194 Direct Line: (086) 826-9058 Mobile Nos. 09850508783 (smart/tnt) 09539212832 (globe/tm) E-mail Address: Crhprocurement.bac@gmail.com Approved By: (sgd) Atty. Ma. Flordelin T. Ensomo, Cpa Attorney Iv Chairman, Bids And Awards Committee

Details: Description 1 9798891611009 - Animal Physiology/2024/armstrong, A. Copy 1 2 9786218035027 - Campus Journalism Within Your Reach/2016*/bulusan, F. Copy 1 3 9789392333811 - Introduction To Kinesiology (hb)/2023/rathor, M. Copy 1 4 9786214092376 - 9786214092376 - Basic Of Arnis De Mano: A Handbook For Teachers And Students/2023/anajao Et Al. Copy 2 5 9789351119746 - Agricultural Land Drainage- Hb/2017/anand, A. Copy 1 6 9789719655145 - Physical Education And Health: Aquatic (basic Swimming) And Mountaineering Revised Edition 2023/latorre Copy 1 7 9786214510351 - Let Comprehensive Reviewer General Education/2023/corpuz, B. Et Al. Copy 1 8 9786214510368 - Let Rev. Professional Education/2023/corpuz Et. Al. Copy 1 9 9789719655688 - English For Purposive Communication (a Modular Approach)/2023/gutierrez-ang, J. Copy 1 10 9789719655282 - Purposive Communication (revised Edition)/2023/zoleta Copy 1 11 9786214092079 - Essentials Of Purposive Communication/2023/caudilla Copy 1 12 9786214092246 - Understanding The Self:new Normal Edition/2024/palean Et Al. Copy 1 13 9786214060450 - Understanding Society And Culture: A Sociological And Anthropological Approach/2016/ Riodique Iii, F.c. Et Al. Copy 1 14 9786214091935 - Introduction To Ethics/2023/umali, Et Al Copy 1 15 9789719655527 - Science, Technology And Society/2023/tabotabo, C. Copy 1 16 9786214271634-ethics/2023/bacolod, Et, Copy 1 17 9786214092277 - Art Of Self Discovery, The: An Understand The Self Workbook-textbook 2023/villanueva; Egargo Copy 1 18 9786214271641 - Readings In Philippine History/2023/bacolod, Et, Copy 1 19 9786214063550 - Life And Works Of Dr. Jose P. Rizal Revised Edition/2024/pangilinan Copy 1 20 9786214510405 - The Contemporary World/2024/mananay, Sanchez Copy 1 21 9786214510375 - Inclusive Education In Early Childhood Settings/2024/boholano,menoria Copy 1 22 9786214510443 - Interactive And Innovative Teaching Strategies: A Compendium/2024/milagros L. Copy 2 23 9786214510320 - Let Rev. Prof.ed Assessment In Learning/2023/corpuz, B. Copy 1 24 9786214091690f - Facilitating Student-centered Teaching & Learning/2023/larioque, Et Copy 1 25 9786214271726 - Gender And Society/2024/bacolod, Et, Copy 1 26 9786214460069 - Physical Education 101 For College Students/2022/enrique Copy 1 27 9789393274137 - Marketing Research/2020/chanda Copy 1 28 9786214161256 - Strategic Management - Concepts And Application/2022/ Cabrera, E. & Cabrera, G. Copy 1 29 9786214063482 - Mastering Pricing And Costing: Strategies For Profitable Business Growth/2024/pasahol Et Al Copy 1 30 9789719655800 - Foundations Of Operations Management: A Practical Guide For Higher Learning/2024/perida, Arcadio Copy 1 31 9786214271481 - Understanding Marketing Research/2024/mutya Copy 1 32 9789719655978 - Entrepreneurial Behavior Growth Mindset And Fixed Mindset/2024/pasahol Et Al Copy 1 33 9789390674206 - Social Media Marketing (hb)/2021/barman, R.d. Copy 1 34 9789350301685 - The Era Of Commerce And E-commerce /2022/ Zaveri, N. Et Copy 1 35 9781984678928 - Agricultural Implements And Machinery/2023/3g E-learning Copy 1 36 9789391972066 - Scientific Poultry Production And Nutrition/ 2022/ Pandey, D. Copy 1 37 9789350305645 - Nutrition And Disease Management In Poultry/2020/lewis, G. Copy 1 38 9789391096632 - Principles And Methods Of Sampling In Animal Diseases Surveys/ 2022/singh, S. K Copy 1 39 9789352220328 - Animal Physiology (hb)/2022/eyeson, S.r. Copy 1 40 9781912859030 - Environmental Pollution Research (hb)/2023/adams, K. Copy 1 41 9781799600794 - Forest Biodiversity And Its Conservation Practices/reprinted 2024/ezra Altenwerth Copy 1 42 9789710391448 - Cordillera Games/ 2009/flores, J. Copy 1 43 9786214092239 - The Teaching Profession/2024/fernando Copy 1 44 9789389740660 - Humour In Classroom/2021/k.s. Bhardwaj Copy 1 45 9786214092369 - An Eye For Art Appreciation Perception And Expression/2024/sonsana, Et. Al. Copy 2 46 9789395546966 - Research In Physical Education And Sports Science (hb) 2023/ Kumar, R. Copy 1 47 9789719655404 - The Teaching Profession In The 21st Century/2024/ Sarandi & Babao Copy 2 48 9789392516191 - Sociological Aspects In Physical Education/2023/bhoj Ram Copy 1 49 9789719655145 - Physical Education And Health: Aquatic (basic Swimming) And Mountaineering Revised Edition/2023/latorre Copy 1 50 9789391972400 - Poultry Feed Technology (hb)/2022/pandey, D. Copy 1 51 9789391096960 - Poultry Farming And Feed Formulations (hb)/2022/lewis, G. D Copy 1 52 9798891612655 - Animal Breeding And Genetics/2024/matthews, K Copy 1 53 9786214091706 - Art Appreciation 2nd Edition/2023/etm Copy 1 54 9786214063475 - Reading Visual Arts/2024/zoleta Copy 1 55 9786214061105 - Physical Education And Health 4 For Shs/2018/gonzalvo, R. Copy 1 56 9789719655855 - (path Fit 4 Sports) Menu Of Sports/2024/punzalan Et Al. Copy 1 57 9789719655503 - Physical Activity Towards Health And Fitness (path-fit 4 Sports) Individual/dual And Team Sports/2023/medina-bulatao, M.g. Et. Al. Copy 1 58 9798891612341 - Agricultural Entomology/2024/watkins, R. Copy 1 59 9789719656210 - Research Fundamentals From Concept To Output: A Guide For Researchers & Thesis Writers/ 2016/ Almeida, Et Al. Copy 1 60 9789710391622 - Effective Classroom Management/2010/patron, Ida Copy 1 61 9716858143 - Let Comprehensive Reviewer Based On The Ncbts And Tos Professional Education Beed & Bsed Volume 2/2016/bautista, Et Al. Copy 1 62 9786214092062 - Physical Activities Towards Health And Fitness Pathfit 2: Exercise-based Fitness Activities/2023/ Ballecer, M. Copy 15 63 9786214460069 - Physical Education 101 For College Students/2022/enrique, W. Dc Copy 2 64 9786214092239 - The Teaching Profession/2024/fernando, Et Al. Copy 1 65 9789352692293 - Psychological Aspects In Physical Education And Sport/ 2019/ Singh, S. Copy 1 66 9789392333927 - Motor Control And Human Movement (hb)/2023/bissu, A. Copy 1 67 9789392333927 - Motor Control And Human Movement (hb)/2023/bissu, A. Copy 1 68 9789710391448 - Cordillera Games/2009/flores, J. Copy 1 69 9789392516160 - Physical Education And Psychology/2023/bhoj Ram Rawte Copy 1 70 9789395337083 - Sports And Exercise Psychology (hb)/2023/kaswan, S.s. Copy 1 71 9789357510745 - Biomechanical Evaluation Of Movement In Sport & Exercise/2024/roshan Sinha/ John Michael Aquino Copy 1 72 9789395431804 - Tourism As An Industry (hb)/2023/rajpal, N. Copy 1 73 9786214510351 - Let Comprehensive Reviewer General Education/ 2023/ Corpuz, B. Et Al. Copy 1 74 2244-4734 - Licensure Examination For Teachers (let) Reviewer 2024 Updated Edition/2024/jose-pangan, M. / Duque-novales, M. Copy 1 75 9786214063659 - (path Fit 1) Physical Activity Towards Health And Fitness 1 Movement Compentency Revised Ed./2024/bulatao Et Al Copy 1 76 9789719655565 - Physical Activity Towards Health & Fitness 1 (path-fit 1) Health & Wellness, Movement Education And Exercise Program/2023/ Punzalan, M.d, Et. Al. Copy 1 77 9786214062669 - Physical Education 2 Rhythmic Dance And Social Activities/ 2020/punzalan & Habana Copy 1 78 9786214092062 - Physical Activities Towards Health And Fitness Pathfit 2: Exercise-based Fitness Activities/2023/ Ballecer, M. Copy 1 79 9786214510368 - Let Rev. Professional Education/2023/corpuz Et. Al. Copy 1 80 9786214510320 - Let Rev. Prof.ed Assessment In Learning/2023/corpuz, B. And Cuartel, I. Copy 5 81 9786214510450 - Let Reviewer Filipino/2024/elmer B. De Leon Copy 5 82 9786214510368 - Let Rev. Professional Education /2023/corpuz Et. Al. Copy 5 83 9786214510351 - Let Comprehensive Reviewer General Education/2023/corpuz, B. Et Al. Copy 5 84 9789719647744 - Technical English 1 (investigative Report Writing And Presentation)/2023/alvarez, J. Copy 1 85 9789719647751 - Technical English 2 (legal Forms)/2023/alvarez, J. Copy 1 86 9786214880041 - Criminological Research 2nd Ed./2024/beit-chavez Copy 1 87 9786214880300 - Law Enforcement Organization And Administration 2nd Edition/2025/detran, A. Et. Al. Copy 1 88 9786214880270 - Therapeutic Modalities/2024/bayog, M. Et. Al. Copy 1 89 9789719647874 - Fire Protection And Arson Investigation/ 2023/ Tello, W/cejes, L Copy 1 90 9786214880034 - Forensic Photography 6th Ed./2024/ma.elena Magadia/ Ma. Elizabeth Bulan Copy 1 91 9789395080521 - Auto Mechanic A Career Guide/2024/josef Carter Copy 1 92 9789395080538 - Automotive Mechanic Advanced/2024/josef Carter Copy 1 93 9789395080729 - Electrical Installation And Maintenance Basic And Intermediate/2024/laxman Singh Copy 1 94 9781984685551 - Basic Knowledge Of Electrical Technology/2024/3g E-learning Copy 1 95 9786214510207 - Simplified Ojt Methods (on-job-training) On Building Construction For Engineers & Architects/2022/virgilio N. Porte Copy 4 96 9798891612075 - Introduction To Linguistics/2024/fletcher, H. Copy 1 97 9781639876686 - Educational Psychology/2023/richards, S. Copy 1 98 9786214180455 - Licensure Examination For Criminologist (review Orientation Module) 2018 Millennial Edition/2018/peckley, M. F. Copy 1 99 9786214510481 - Reviewer For Civil Service Examination/2024/corpuz, Borabo, Cuartel Copy 6 100 2244-4734 - Licensure Examination For Teachers (let) Reviewer 2024 Updated Edition/2024/jose-pangan, M. / Duque-novales, M. Copy 3 101 9786214880102 - Security Officer Manual On Leadership And Management/2024/dino B. Bobier Copy 1 102 9781916784574 - Technological Assessment Of Poultry Production And Management/2024/yani Taylor Copy 1 103 9786210612189 - Duck Egg Production And Processing Principple And Practices In The Philippine Context/2024/anglel L. Lambio Copy 1 104 9798891612310 - Soil Fertitlity And Fertilizers/2024/mcmahon, N. Copy 1 105 9798891612341 - Agricultural Entomology/2024/watkins, R. Copy 1 106 9798891611009 - Animal Physiology/2024/armstrong, A. Copy 1 107 9798891612662 - Animal Nutrition And Feeding/2024/matthews, K. Copy 1 108 9789389740172 - Educational Philosophy/2020/nibedita Guru / Binaya Bhusan Mohapatra Ganesh Panda / Sujatha M. Copy 1 109 9789395577199 - Digital Electronics/2024/kumar, S. Copy 1 110 9789395577205 - Basic Electronics/2024/kumar, S. Copy 1 111 9798891612266 - Introduction To Agribusiness Management And Entrepreneurship/2024/mitchell, F. Copy 1 112 9781641722070 - Crop Production: Techniques And Technology/2023/ Ingram, L. Copy 1 113 9781984636850 - Computer Aided Drawing And Drafting/2020/3g E-learning Copy 1 114 9798891612440 - Introduction To Forensic Science/2024/hodges, M. Copy 1 115 9786214880287 - Special Crime Investigation 2 With Interview And Interrogation/2024/astilla, A. Et. Al. Copy 1 116 9789350306666 - Encyclopaedia Of Crime, Criminology And Forensic Science (2 Vols.)/2021/kumar, A./yadav, R.k. Copy 1 117 9781984680242 - 3g Handy Guide: Construction Operations And Supervision - 2nd Ed./3g E-learning/2023, Pb Copy 1 118 9789391383299 - A Glossary Of Soil Science/khambalkar/2023, Hb Copy 1 119 9798887153407 - Agribusiness Management/gilbert/2024, Hb Copy 1 120 9781774699010 - Apiculture/ Wafullah/ 2024, Hb Copy 2 121 9789388387682 - Applied Plant Anatomy And Plant Breeding/pragati/2024, Hb Copy 1 122 9780357766620 - Automotive Maintenance & Light Repair - 3rd Ed./thompson/2024, Pb Copy 1 123 9781119730996 - Barry's Introduction To Construction Of Buildings - 5th Ed./emmitt/2024, Pb Copy 1 124 9781984680402 - Basic Calculus - 3rd Ed./3g E-learning/2023, Pb Copy 1 125 9798887150871 - Biotechnology Of Plant Tissues/burnett/2023, Hb Copy 1 126 9798887153377 - Bridge Engineering/billington/2024, Hb Copy 1 127 9781119772408 - Building Codes Illustrated: A Guide To Understanding The 2021 International Building Code - 7th Ed./ching/2022, Pb Copy 1 128 9781119772514 - Building Codes Illustrated: The Basics/ching/2023, Pb Copy 1 129 9798887153391 - Civil Engineering: Construction Design And Management/maison/2024, Hb Copy 1 130 9781119895305 - Continuous Cover Forestry: Theories, Concepts And Implementation/pommerening/2024, Hb Copy 1 131 9781984688699 - Core Concepts In Engineering: Civil Engineering - 2nd Edition/arduman/2024, Pb Copy 1 132 9781984688675 - Core Concepts In Mathematics: Differential Equations - 2nd Edition/mashoko/2024, Pb Copy 1 133 9781984688644 - Core Concepts In Mathematics: Geometry - 2nd Edition/leo/2024, Pb Copy 1 134 9781984688682 - Core Concepts In Mathematics: Trigonometry - 2nd Edition/alwazeer/2024, Pb Copy 1 135 9798214031958 - Differential Equations With Boundary-vatue Problems - Metric Version 10th Edition/zill/2024, Pb Copy 1 136 9781984680464 - Disaster Readiness And Risk Reduction - 4th Edition/3g E-learning/2023, Pb Copy 1 137 9781119890904 - Ecological Silvicultural Systems: Exemplary Models For Sustainable Forest Management/palik/2024, Pb Copy 1 138 9781984688439 - Electrical Engineering Drawing - 2nd Edition/nollen/2024, Pb Copy 1 139 9780357618707 - Electricity For Refrigeration, Heating And Air Conditioning - 11th Edition/smith/2023, Hb Copy 1 140 9781266262494 - Engineering Circuit Analysis - 10th Edition/hayt, Jr./2024, Pb Copy 1 141 9780357684429 - Engineering Fundamentals: An Introduction To Engineering - 7th Si Edition/moaveni/2024, Pb Copy 1 142 9789395763028 - Entrepreneurship Development In Specialty Agriculture/kachroo/2023, Hb Copy 1 143 9781119476085 - Forest Ecology - 5th Edition/kashian/2023, Pb Copy 1 144 9781641167259 - Forest Ecology And Conservation: An Interdisciplinary Perspective/erickson/2024, Pb Copy 1 145 9798887150727 - Handbook Of Forests And Forestry/kumar/2023, Hb Copy 1 146 9781666868036 - Handbook Of Useful Fungi In Agriculture Sustainability/blackburn/2024, Hb Copy 1 147 9781984688149 - Illustrated Dictionary Of Algebra - 3rd Edition/harvey/2024, Pb Copy 1 148 9781641167178 - Introduction To Botany/ Sawyer/2023, Pb Copy 1 149 9781260598025 - Introduction To Environmental Engineering/davis/2023, 6th, Pb Copy 1 150 9781641730242 - Introduction To Renewable Energy/carter/2024, Pb Copy 1 151 9789358871289 - Mastering Agricultural Extension Education/jarial/2024, Pb Copy 1 152 9789395431712 - Mechanical Machine Design/singh/2023, Hb Copy 1 153 9781337904919 - Modern Hydronic Heating & Cooling: For Residential And Light Commercial Buildings - 4th Edition/siegenthaler/2023, Hb Copy 1 154 9798887153094 - Pest Management: Principles And Practices/ Kingston/ 2024, Hb Copy 1 155 9789395319263 - Pests Of Vegetables - 2nd Fully Revised And Enlarged Edition/laskar/2023, Hb Copy 1 156 9788119920259 - Plane Surveying/young/2024, Hb Copy 1 157 9780357543726 - Plant & Soil Science: Fundamentals And Applications - 2nd Edition/parker/2023, Hb Copy 1 158 9798887153117 - Plant Cell And Tissue Culture/marshall/2024, Hb Copy 1 159 9781647404505 - Plant Pathology And Plant Pathogens/bennett/2024, Pb Copy 1 160 9781266281624 - Plants And Society - 9th Edition/levetin/2024, Pb Copy 1 161 9780357026328 - Plumbing 101 - 7th Edition/phcc Ef/2025, Pb Copy 1 162 9780357684672 - Principles Of Foundation Engineering - 10th Si Edition/das/2024, Pb Copy 1 163 9781639896783 - Principles Of Soil Microbiology/silva/2023, Hb Copy 1 164 9781071818107 - Qualitative Research Writing: Credible And Trustworthy Writing From Beginning To End/salmona/2024, Pb Copy 1 165 9789394490789 - Seed Production Of Field Crops - 2nd Fully Revised And Enlarged Edition/mondal/2023, Hb Copy 1 166 9781264441389 - Teach Yourself Electricity And Electronics - 7th Edition/gibilisco/2022, Pb Copy 1 167 9780357766385 - Today's Technician: Automotive Electricity & Electronics (2 Books) - 8th Edition/hollembeak/2024, Pb Copy 1 168 9781337567336 - Today's Technician: Automotive Suspension & Steering Systems (2 Books) - 7th Edition/schnubel/2020, Pb Copy 1 169 9781799601470 - Veterinary Anatomy Of Domestic Mammals/sanderson/2023, Hb Copy 1 170 9789352691265 - Principles & Concepts Criminology/sharma/2019 Copy 1 171 9781835352533 - Investigation Of Crime Scene Techniques/wiltshira/2025 Copy 1 172 9789362245946 - Organized Crime Investigation/strohmeier/2025 Copy 1 173 9781774698600 - Fundamentals Of Forensic Linguistics/singla/2024 Copy 1 174 9781666888720 - Forensic Dna Technology/snow/2022 Copy 1 175 9781835350355 - Study Of Computer Crime And Forensics/blaylock E.c/2025 Copy 1 176 9781835352052 - Forensic Science Encyclopedia/m. Nelson/2025 Copy 1 177 9789352691524 - Criminology & Penology, Theories On Crime & Punishment/sharma/2019 Copy 1 178 9781835353479 - Technology Of Forensic Dna/geradts/2024 Copy 1 179 9781835353004 - Principles Of Fingerprint/simon A./2025 Copy 1 180 9781666888782 - The Science Examination Of Questioned Documents/bender/2022 Copy 1 181 Forensic Dna Analysis Made Simple/bagasra/2024 Copy 1 182 9789357510394 - Comparative Models And Policing/pandey/2023 Copy 1 183 9781912859733 - Automotive Engineering: Atomotive Transmissions And Transaxles/salas/2023 Copy 1 184 9781984681065 - 3ge Collection On Engineering: Hybrid Electric Vehicles3g E-learning/2023 Copy 1 185 9781984689238 - Core Concepts In Chemistry: Physical Chemistry (2nd Edition) (with Access Code)/tanaka/2024 Copy 1 186 9781984688446 - Electric Circuits (2nd Edition) (with Access Code)/tryon/2024 Copy 1 187 9781774697320 - Services Marketing And Customer Relationship Management/kumar/2024 Copy 1 188 9781984680235 - 3g Handy Guide: Retail Manager 2nd Ed W/ Dvd/3g E-learning/2023 Copy 1 189 9781774697276 - Production And Operations Management/sharma/2024 Copy 1 190 621-418-330-2 - The Blue Book - Reviewer For Board Licensure Examination For Criminologists Volume 1: Professional Courses/garcia/2024, Bp Copy 1 191 621-418-356-2 - The Blue Book - Reviewer For Board Licensure Examination For Criminologists: Volume 2: Area 2 A-c Major Courses/garcia/2024, Bp Copy 1 192 621-418-358-6 - The Blue Book - Reviewer For Board Licensure Examination For Criminologists Volume 3: Area 2 D-e Major Courses + Area 3 Special Courses/garcia/2024, Bp Copy 1 193 621-418-175-9 - Forensic Reviewer A Comprehensive Forensic And Criminalistics Reviewer/domingo/2021, Bp Copy 1 194 621-418-244-2 - Victimology A Comprehensive Guide To Practitioners/depayso/2022, Bp Copy 1 195 621-418-375-3 - Juvenile Delinquency & Juvenile Justice (ra 11131 & Blec Tos Compliance)/mariano Et Al/2024, Bp Copy 1 196 621-418-334-0 - Special Crime Investigation With Interview And Interrogation Protocols/domingo/2024, Bp Copy 1 197 621-418-346-3 - Introduction To The Forensic Sciences/taduran/2024, Bp Copy 1 198 621-418-303-6 - Specialized Crime Investigation With Legal Medicine/dascil /santos/2023, Bp Copy 1 199 621-418-327-2 - Dispute Resolutions And Crises / Incident Management/caño/2024, Bp Copy 1 200 621-418-302-9 - Fire Behavior & Arson Investigations, 4th Edition/bustria/2023, Bp Copy 1 201 621-418-374-6 - Criminology Criminal Sociology - A Comprehensive Reviewer/domingo Et Al/2024, Bp Copy 1 202 621-418-249-7 - Fingerprint - Uniqueness And Persistency Of Friction Ridge Skin Volume 1/rocamora/2023, Bp Copy 1 203 621-418-368-5 - Forensic Handwriting Examination - A Student Guide With Laboratory Activities/immatong/2024, Bp Copy 1 204 9780357676189 - Power System Analysis And Design Copy 1 205 9781292440996 - Introduction To Materials Science For Engineers Copy 1 206 9789811270154 - Handbook Of Accelerator Physics And Engineering Copy 1 207 9780357684429 - Engineering Fundamentals An Introduction To Engineering Copy 1 208 9781292725734 - Mechanics Of Materials (si) Copy 1 209 9788119205691 - Machine Elements Copy 1 210 9781266968365 - Fluid Mechanics: Fundamentals And Applications Copy 1 211 9781484289884 - Industrial Robotics Control: Mathematical Models Copy 1 212 9781119897743 - Sketchup For Interior Design: 3d Visualizing Copy 1 213 9789815097306 - The Nature Of Mathematics Copy 1 214 9781266152115 - Thermodynamics: An Engineering Approach Copy 1 215 9781266115837 - Statistics For Engineers And Scientists Copy 1 216 9789813313545 - Stern's Introductory Plant Biology Copy 3 217 9781266929892 - Shigley's Mechanical Engineering Design: 2024 Release Copy 1 218 9789814839815 - Advanced Engineering Mathematics, Metric Edit Copy 1 219 9789814846189 - Differential Equations With Boundary Value Problems Copy 1 220 9789814846493 - Engineering Fundamentals: An Introduction To Engineering Copy 1 221 9789814866262 - Engineering Mechanics: Dynamics Copy 1 222 9789719814474 - Engineering Drawing And Design: Solid Mensuration Copy 5 223 9789719820239 - Essential Mathematics For The Modern World Copy 1 224 9789815161120 - Calculus International Metric Edition Copy 1 225 9781394183869 - Chemistry: Core Concepts (print And Interactive Copy 1 226 9780357684429 - Engineering Fundamentals An Introduction To Engineering Copy 1 227 9781760427122 - Automotive Mechanics, Revised Edition Copy 1 228 9789719811152 - Principles And Reactions: Chemistry For Engineering Students Copy 2 229 9781107160002 - Mechanics Of Wave-seabed-structure Interact Copy 1 230 9789814846127 - Physics For Scientists And Engineers With Modern Physics Copy 1 231 9789719818106 - Mathematics In The Modem World: Outcomes-based Module Copy 1 232 9781292438221 - Physics For Scientists And Engineers: A Strategic Approach With Modern Physics, Global Edition, 5th Edition Copy 1 233 9781292725734 - Mechanics Of Materials (si) Copy 1 234 9780357684672 - Si Principles Of Foundation Engineering Copy 1 235 9788119677283 - Steel And Timber Design Copy 1 236 9781799601227 - Soil Microbiology Copy 1 237 9781292460208 - Statics And Mechanics Of Materials, Si Units Copy 1 238 9781119911906 - Automotive Handbook Copy 1 239 9780367758776 - Earthquake Science And Engineering Copy 1 240 9781266091797 - Engineering Economy Copy 2 241 9780357684429 - Engineering Fundamentals An Introduction To Engineering Copy 1 242 9780357766248 - Automotive Engines: Diagnosis, Repair, And Rebuilding Copy 1 243 9781760427122 - Automotive Mechanics, Revised Edition Copy 1 244 9780357766965 - Electrical Wiring Residential Copy 1 245 9780357908426 - Calculus: Earty Transcendental Functions, International Metric Edition Copy 1 246 9781292451930 - Engineering Mechanics: Dynamics, Si Units Copy 1 247 9781484296448 - Build Autonomous Mobile Robot From Scratch Using Ros Copy 1 248 9781071884607 - Transforming Schools For Multilingual Leamers Copy 1 249 9781266152115 - Thermodynamics: An Engineering Approach Copy 1 250 9780357766392 - Today's Technician: Automotive Electricity And Electronics Classroom Manual Copy 1 251 9781266277474 - Technology Of Machine Tools Copy 1 252 9789719817253 - Technopreneurship Tech To Go: A Student's Guide To Bringing Technology To The Market Copy 1 253 9781260547887 - Statistics For Engineers And Scientists Copy 1 254 9781266152115 - Thermodynamics: An Engineering Approach Copy 1 255 9780357766392 - Today's Technician: Automotive Electricity And Electronics Classroom Manual Copy 1 256 9788119365098 - Workshop Theory And Practice Copy 1 257 9781266277474 - Technology Of Machine Tools Copy 1 258 9781266929892 - Shigley's Mechanical Engineering Design: 2024 Release Copy 1 259 9781394199501 - Power Systems: Fundamental Concepts And The Transition To Sustainability Copy 1 260 9781394177820 - Willis's Elements Of Quantity Surveying Copy 1 261 9781032137995 - Bioenergy Engineering Copy 1 262 9780128211793 - Chemical Engineering Design: Principles, Practice And Economics Of Plant And Process Design Copy 1 263 9781119718932 - Electron Flow In Organic Chemistry: A Decision-based Guide To Organic Mechanisms Copy 1 264 9780357760451 - Differential Equations With Boundary - Value Problems Copy 1 265 9780357719428 - Energy: It's Use And The Environment Copy 1 266 9780357766248 - Automotive Engines: Diagnosis, Repair, And Rebuilding Copy 1 267 9780357908426 - 9780357908426 - Calculus: Earty Transcendental Functions, International Metric Edition Copy 1 268 9783030793777 - Electronic Circuit Design And Application Copy 1 269 9783031296840 - Education And Research For The Future: Engineering As An Illustrative Case Copy 1 270 9789719820031 - Mathematics In The Modem World Copy 1 271 9780357675854 - Environmental Engineering And Sustainable Design Copy 1 272 9781292440996 - Introduction To Materials Science For Engineers Copy 1 273 9781292444048 - Engineering Mechanics: Statics, Si Units (book) Copy 1 274 9789719820239 - Essential Mathematics For The Modern World Copy 1 275 9789813351684 - Engineering Mechanics: Statics & Dynamics Copy 1 276 9789719822530 - Foundation Of Social Studies Copy 1 277 9781666871357 - Matlab: An Introduction Mathematical Computation Copy 1 278 9781266968365 - Fluid Mechanics: Fundamentals And Applications Copy 1 279 9781484289884 - Industrial Robotics Control: Mathematical Models Copy 1 280 9781266159244 - Organic Chemistry Copy 1 281 9783031134357 - Introduction To Intelligent Construction Technology Copy 1 282 9780357684672 - Si Principles Of Foundation Engineering Copy 1 283 9781799600794 - Forest Biodiversity And Its Conservation Practice Copy 1 284 9781799600817 - Forest Genetics And Tree Breeding Copy 1 285 9781799600824 - Forest Management And Sustainable Development Copy 1 286 9780357766712 - Illustrated Guide To The National Electrical Code Copy 1 287 9780357026328 - Plumbing 101 Copy 1 288 9781292440996 - Introduction To Materials Science For Engineers Copy 1 289 9789811270154 - Handbook Of Accelerator Physics And Engineering Copy 1 290 9780357684429 - Engineering Fundamentals An Introduction To Engineering Copy 1 291 9781292725734 - Mechanics Of Materials (si) Copy 1 292 9781266968365 - Fluid Mechanics: Fundamentals And Applications Copy 1 293 9781484289884 - Industrial Robotics Control: Mathematical Models Copy 1 294 9781119897743 - Sketchup For Interior Design: 3d Visualizing Copy 1 295 9789719820437 - The Contemporary World Copy 10 296 9789815097306 - The Nature Of Mathematics Copy 1 297 9781266152115 - Thermodynamics: An Engineering Approach Copy 1 298 9781266115837 - Statistics For Engineers And Scientists Copy 1 299 9789813313545 - Stern's Introductory Plant Biology Copy 3 300 9781266929892 - Shigley's Mechanical Engineering Design: 2024 Release Copy 1 301 9789814839815 - Advanced Engineering Mathematics, Metric Edit Copy 3 302 9789814846189 - Differential Equations With Boundary Value Problems Copy 3 303 9789814846493 - Engineering Fundamentals: An Introduction To Engineering Copy 3 304 9789814866262 - Engineering Mechanics: Dynamics Copy 3 305 9789719814474 - Engineering Drawing And Design: Solid Mensuration Copy 5 306 9789719820239 - Essential Mathematics For The Modern World Copy 10 307 9789815161120 - Calculus International Metric Edition Copy 3 308 9781394183869 - Chemistry: Core Concepts (print And Interactive Copy 1 309 9780357684429 - Engineering Fundamentals An Introduction To Engineering Copy 1 310 9781760427122 - Automotive Mechanics, Revised Edition Copy 1 311 9789719811152 - Principles And Reactions: Chemistry For Engineering Students Copy 3 312 9789814846127 - Physics For Scientists And Engineers With Modern Physics Copy 3 313 9789719818106 - Mathematics In The Modem World: Outcomes-based Module Copy 10 314 9781292438221 - Physics For Scientists And Engineers: A Strategic Approach With Modern Physics, Global Edition, 5th Edition Copy 1 315 9781292725734 - Mechanics Of Materials (si) Copy 1 316 9780357684672 - Si Principles Of Foundation Engineering Copy 1 317 9788119677283 - Steel And Timber Design Copy 2 318 9781799601227 - Soil Microbiology Copy 1 319 9781292460208 - Statics And Mechanics Of Materials, Si Units Copy 1 320 9781119911906 - Automotive Handbook Copy 1 321 9780367758776 - Earthquake Science And Engineering Copy 1 322 9781266091797 - Engineering Economy Copy 3 323 9780357684429 - Engineering Fundamentals An Introduction To Engineering Copy 1 324 9780357766248 - Automotive Engines: Diagnosis, Repair, And Rebuilding Copy 1 325 9781760427122 - Automotive Mechanics, Revised Edition Copy 1 326 9780357766965 - Electrical Wiring Residential Copy 1 327 9780357908426 - Calculus: Earty Transcendental Functions, International Metric Edition Copy 1 328 9781292451930 - Engineering Mechanics: Dynamics, Si Units Copy 1 329 9781484296448 - Build Autonomous Mobile Robot From Scratch Using Ros Copy 1 330 9781071884607 - Transforming Schools For Multilingual Leamers Copy 1 331 9781266152115 - Thermodynamics: An Engineering Approach Copy 1 332 9783031095917 - Traffic Engineering Copy 1 333 9780357908549 - Transportation: A Global Supply Chain Perspective Copy 1 334 9780357766392 - Today's Technician: Automotive Electricity And Electronics Classroom Manual Copy 1 335 9781266277474 - Technology Of Machine Tools Copy 1 336 9789719817253 - Technopreneurship Tech To Go: A Student's Guide To Bringing Technology To The Market Copy 10 337 9781260547887 - Statistics For Engineers And Scientists Copy 3 338 9781266152115 - Thermodynamics: An Engineering Approach Copy 1 339 9780357766392 - Today's Technician: Automotive Electricity And Electronics Classroom Manual Copy 1 340 9789719822677 - Purposive Communication In The 21st Century Copy 10 341 9788119365098 - Workshop Theory And Practice Copy 1 342 9781266277474 - Technology Of Machine Tools Copy 1 343 9781266929892 - Shigley's Mechanical Engineering Design: 2024 Release Copy 1 344 9781394199501 - Power Systems: Fundamental Concepts And The Transition To Sustainability Copy 1 345 9781394177820 - Willis's Elements Of Quantity Surveying Copy 1 346 9781284272383 - Ems Safety Course Manual Copy 1 347 9780357760451 - Differential Equations With Boundary - Value Problems Copy 1 348 9780357766248 - Automotive Engines: Diagnosis, Repair, And Rebuilding Copy 1 349 9780357908426 - 9780357908426 - Calculus: Earty Transcendental Functions, International Metric Edition Copy 1 350 9783030793777 - Electronic Circuit Design And Application Copy 1 351 9789719820031 - Mathematics In The Modem World Copy 10 352 9780357675854 - Environmental Engineering And Sustainable Design Copy 1 353 9781292440996 - Introduction To Materials Science For Engineers Copy 2 354 9781292444048 - Engineering Mechanics: Statics, Si Units (book) Copy 1 355 9789719820239 - Essential Mathematics For The Modern World Copy 10 356 9789813351684 - Engineering Mechanics: Statics & Dynamics Copy 3 357 9781119883302 - Highway Engineering Copy 1 358 9781119879435 - Ethics, Technology, And Engineering - An Introduction Copy 1 359 9789719822530 - Foundation Of Social Studies Copy 3 360 9781666871357 - Matlab: An Introduction Mathematical Computation Copy 1 361 9781266968365 - Fluid Mechanics: Fundamentals And Applications Copy 2 362 9781484289884 - Industrial Robotics Control: Mathematical Models Copy 2 363 9789719820505 - Science, Technology And Society: An Evidence-driven Outcomes-based Module Copy 10 364 9781266159244 - Organic Chemistry Copy 1 365 9781394175710 - Planning For Community Copy 1 366 9783031134357 - Introduction To Intelligent Construction Technology Copy 1 367 9780357684672 - Si Principles Of Foundation Engineering Copy 1 368 9780357766712 - Illustrated Guide To The National Electrical Code Copy 1 369 9780357026328 - Plumbing 101 Copy 1 370 Filipino Sa Iba't Ibang Disiplina/billy/2024 Copy 5 371 Sangguniang Aklat Ng Gramatika At Pagbuo Ng Mapa Sa Wika/alvarado/2023 Copy 5 372 Panimulang Lingwistika Pandalubhasaan/lonez/2021 Copy 5 373 Intoduksyon Sa Pananaliksik Sa Wika At Panitikan/alvarado/2022 Copy 5 374 Intoduksyon Sa Pag-aaral Ng Wika Pandalubhasaan/balawan/2021 Copy 5 375 Panitikang Panlipunan/acopra/2020 Copy 5 376 Introduction To Discreet Mathematics/2023/sirug Copy 10 377 Jose Rizal: The Man And The Hero/pasigui/2024 Copy 10 378 Life And Works Of Dr. Jose Rizal/2024/pangilinan Copy 10 379 Readings In Philippine History/baes/2025 Copy 10

Details: The purpose of this contract is the preventive and curative maintenance and the management works of: • Gate (exterior pedestrian) • Sliding door (pedestrian entrance/exit of building) • Metal grille or curtain • Rising barrier • Sectional or swinging garage door < 3 meters high • Industrial door height >= 3 meters high (sectional or swinging) • Double swinging or single swinging gate • Suspended or ground sliding gate • Retractable bollard • Turnstile (non-motorized) • Fast corridor The consultation includes the following lots: Lot 1: City of Aix and Marseille (site: St Jérôme, IUT Susini and Château Gombert) as well as other municipalities (site: La Ciotat, Avignon, Salon, and Arles). Lot 2: City of Marseille (Central and Southern district) as well as the North Medicine component. Lot 3: Sites of the Alps (Digne and Gap) This Lot Is Not Part of This Consultation. In accordance with Article R. 2123-1 of the Public Procurement Code, the University Has Decided to Implement an Adapted Procedure for Lot 3 "Sites of the Alps (Digne and Gap)" in 2026 (this Lot Includes a Maximum Annual Threshold Strictly Less Than €10,000 Excl. Tax). Each Lot Constitutes a Contract. Unless Specially Specified, the Contract Is Referred to Interchangeably in the Consultation Documents as "Contract" Regardless of the Lot Concerned. Unless Specially Specified, All Provisions Mentioned in the Consultation Documents Apply to All Lots. The Description of the Services Is Described in the CCP and Its Appendices. Limitation on the Number of Lots That May Be Awarded to the Same Economic Operator == > Economic Operators May Submit Bids to All Lots, But Only One Lot Will Be Awarded Per Candidate. For Further Details: See Article 8.3 of the Consultation Regulations Rc.

Details: 1. Preamble The Helmholtz-Zentrum Hereon GmbH (hereon) is a non-profit research institution and one of the 18 member institutions of the Hermann von Helmholtz Association of German Research Centres EV. 90% of Hereon's expenses are financed by the federal government (BMBF - Federal Ministry of Education and Research) and 10% by the four consortium states (Schleswig-Holstein, Hamburg, Lower Saxony and Brandenburg). The statutory task of the society is to conduct research and development in a multidisciplinary network, particularly in the areas of materials research, coastal, climate and environmental research and regenerative medicine. Description of services - Year-round berths for the Coriolis and the Storch on a floating pontoon (independent of the tide), - Berth for the Storch in winter (drying on land), - Crane provision for laboratory container changes (20ft) from board the Ludwig Prandtl and dry-drying the Storch, - Storage options on land for laboratory containers and equipment (e.g. wave measuring buoy, multi-part measuring pole), - Storage options for equipment in halls or garages, - Provision of electricity and water, waste and hazardous waste disposal and disposal of operating materials, - Use of parking spaces for the crew and employees of Hereon, provision of emergency service passes (passage during high water), - Key for the shipyard gate, fenced-in area - Accessibility from the Hereon site, max. distance 50 km, - Use of a pier for loading expedition equipment from trucks directly onto Corio-lis, - Possibility of carrying out all emergency repairs at short notice. - Carrying out recurring maintenance work (cooperation with third-party companies is possible). - Participation in the relevant inspections by the class (bv) and the flag (bg traffic). - Accessibility to the Elbe estuary and the North and Baltic Seas. The contract is concluded for a period of 2 years with the possibility of extension for a further two years. The berthing fees are billed quarterly.

Details: The Inquiry Is Conducted In Pursuant to Decision No. 58/2021 of the Provincial Commander of the Police in Kraków of November 4, 2021, as amended. The Proceedings Are Conducted in Polish on the Electronic Purchasing Platform Under the Name and Case Number of the Proceeding Indicated in the Title. I. General Information: 1. The Proceedings Are Conducted in Polish In Electronic Form Through the Purchasing Platform (Hereinafter referred to as the Platform; System) At the Address: Https://malopolska-policja.eb2b.com.pl/, On Which Procurement Documents Directly Related to the Proceeding Will Be Made Available 2. Use of the Platform Is Free of Charge. 3. Communication Between the Ordering Party and Contractors, Including All Declarations, Applications, Notifications and Information, Are Transferred Through the Platform: A) Electronic Documents, Declarations or Electronic Copies of Documents or Declarations Constituting the Offer Are Submitted by the Contractor Using the "Submit an Offer" Tab During the Offer/Application Submission Stage. B) Electronic Documents, Declarations, Supplements, Electronic Copies of Documents or Declarations Submitted by the Contractor After Submitting Offers (e.g. Upon the Ordering Party's Request), Are Submitted Using the "Questions/Information" Tab. C) Any Requests for Clarification of the Content of the Specifications, Requests for an On-Site Inspection, Etc. Are Also Submitted Using the "Questions/Information" Tab. The Date of Receipt Is Considered to Be the Date of Their Uploading to the System. 4. Below are the instructions for using the Platform, i.e.: A) Submission to the Procedure requires the Contractor to log in to the System. After entering the User Data, i.e. e-mail address and password, the submission is automatically accepted by the system. B) In the "proceedings" tab, "list of open proceedings" select this procedure and using the command "register to participate in the procedure" go to the registration form - if the Contractor does not have an account on the platform or the user login panel to the system. C) After filling in the registration form, the contractor will receive an e-mail informing that he can log in to the platform for the first time. Registration of a new account is subject to verification and acceptance by the operator, which may take up to 24 hours (8 working hours). D) In the "Organizer's attachments" tab of the subject procedure, the documentation of the procedure (swz and other documents) is available. The Document is downloaded by clicking on the selected attachment and pressing the "download" command. In order to download all attachments at the same time, select the "download Package" command and then "download all Organizer's Attachments". 5. The Ordering Party Specifies the Necessary Hardware and Application Requirements Enabled to Work on the Purchasing Platform, i.e.: A) Permanent Access to the Internet with Guaranteed Throughput of No Less Than 4/1 Mb/s, B) PC or Mac Computer with the Following Configuration: RAM Min. 8 Gb, Dual-core Processor Clocked at Min. 2.4 GHz, One of the Operating Systems: MS Windows, Mac Os, Linux, With Current Technical Support from the Manufacturer, C) Any Version of Internet Browser Installed, D) Javascript Support Enabled, E) Installed Program Supporting File Formats Used by the Contractor (e.g. Acrobat Reader for Files in .pdf Format). 6. The Ordering Party recommends uploading files to the Platform in a maximum size of up to 250 Mb and in the case of documents signed with a trusted signature up to 10 Mb. 7. The Ordering Party specifies information on the encoding and time of data receipt, i.e.: A) The file attached by the Contractor on the Purchasing Platform and saved is encrypted in the system. The possibility of opening the file is available only after decryption by the Ordering Party after the deadline for submitting offers. B) The time of data receipt by the Platform is indicated by the date and exact time (hh:mm:ss) attached to the electronic document, located on the left side of the document in the "date of submission" column. 8. The offer should be prepared in accordance with this Inquiry. 9. The Offer Should Be Submitted In The Following Manner: A) The Contractor Submits The Offer By Adding In The "Attachments" Tab The Documents (attachments) Specified In This Announcement By Selecting The "Add Attachment" Command And Selecting The Target File To Be Sent; The Contractor Should Describe The Attachment With A Name That Allows Its Identification; B) The Deadline For Submitting The Offer Is Determined By The Time Of Full Processing Of The Transaction On The Platform; C) After Saving, The File Is Encrypted In The System. If The Contractor Has Posted The Incorrect File, They Can Delete It By Selecting The File And Clicking The "Delete" Command. 10. The Contractor Submits The Offer In Encrypted Form, Therefore The Offers Are Not Visible Until They Are Decrypted By The Ordering Party. 11. The Contractor May Independently Withdraw The Offer They Have Submitted. For this purpose, in the "attachments" tab, use the "delete" command, previously selected file. 12. After the deadline for submission of offers, it will not be possible to add an offer (attachments). Ii. Specification of the subject of the order 1. The subject of the order is to carry out initial and periodic medical examinations of persons performing underwater work and periodic examinations of police officers employed at the Voivodship Police Headquarters in Kraków. 2. Scope of the examinations referred to in point 1 Specifies: A) Act of 17 October 2003 on Underwater Work, B) Regulation of the Minister of Health of 17 September 2007 on Health Conditions for Underwater Work, C) Act of 27 June 1997 on Occupational Medicine Services, D) Regulation of the Minister of Health of 9 January 2017 on Periodic Examinations and Check-ups of Police Officers. E) Regulation of the Minister of Health and Social Welfare of 30 May 1996 on Conducting Medical Examinations of Employees, the Scope of Preventive Health Care for Employees and Medical Certificates Issued for the Purposes Provided for in the Labour Code. 3. Detailed definition of the Subject of the Order and the expected quantities of services are included in Annex No. 2 (Price form) and No. 3 (draft Agreement). 4. The place of performance of the Subject of the Order will be the seat of the Contractor and/or the seat of its subcontractors. 5. The basis for the performance of the Services that are the subject of the Order will be the personal referrals issued by the heads of the units and entities for which the tests are performed. 6. The tests end with the issuance of a medical certificate stating: no contraindications to work in a specific position or the existence of contraindications to work in a specific position. 7. The Contractor is obliged to take into account the medical certificates and certificates and psychological certificates of drivers that are valid in terms of the deadline and issued by authorized entities. 8. The Services Provided Will Be Performed By Medical Personnel With Appropriate Knowledge, Qualifications And Appropriate Authorizations Allowing The Independent Performance Of Activities That Are The Subject Of The Contract And Will Be Performed With Due Diligence, Based On Current Medical Knowledge While Maintaining The Principles Of Professional Ethics, While Respecting The Rights Of The Patient. 9. The Contractor Ensures That It Has The Necessary Equipment, Medical Apparatus And Medical Products For This Purpose. In Order To Ensure Continuity Of Medical Services During The Temporary Absence Of Specialist Physicians, The Contractor Is Obliged To Provide A Substitution. Iii. Description of Conditions of Participation in the Proceedings: 1. Contractors who have: 1) Medical Personnel Who Have Appropriate Authorizations to Carry Out Initial and Periodic Medical Examinations of Persons Performing Underwater Work And to Carry Out Periodic Examinations of Police Officers, i.e.: A) Has First or Second Degree Specialization or the Title of Specialist in the Field of: Maritime and Tropical Medicine, Transport Medicine, Occupational Medicine, Industrial Medicine or Aviation Medicine, and B) Has Completed Training in the Field of Adjudicating on the Fitness to Perform Underwater Work at a Research Institute Conducting Activities in the Field of Hyperbaric Medicine or a Medical University Conducting Activities in the Field of Hyperbaric Medicine or a Course in Transport Medicine or Occupational Medicine; 2) An Ophthalmologist; 3) Neurologist; 4) Otolaryngologist; 5) Orthopedist; 6) Dentist; 7) Nurse (auxiliary personnel); 8) Person Authorized to Take Blood; 9) Rooms and (specialist) Medical Equipment for Carrying Out Appropriate Tests, Meeting the Conditions Specified in the Current Regulations by the Minister Responsible for Health. 2. Persons Performing the Tasks Referred to in Paragraph 1 Must Meet the Requirements Specified in the Current Regulations. 3. The Contractor May Entrust the Execution of Part of the Order to a Subcontractor. 4. Entrusting the Execution of Part of the Order to Subcontractors Does Not Release the Contractor from Liability for the Proper Execution of This Order. Iv. Method of Preparation of the Offer: 1. The Offer Should Be Submitted By February 12, 2025, By 12:00. Please Submit Offers Through the Purchasing Platform: Https://platforma.eb2b.com.pl/ 2. Offer Validity Period: 30 Days. 3. The Offer Should Be Prepared In Accordance With The Annexes To This Request: No. 1 (Offer Form) And No. 2 (Price Form). 4. The Bidders Shall Bear All Costs Associated With The Preparation And Submission Of The Offer, Regardless Of The Result Of The Selection Of The Offer. In No Case Shall The Ordering Party Be Liable For The Costs Incurred By The Bidders In Connection With The Preparation And Submission Of The Offer. The Bidders Undertake Not To Make Any Claims In This Respect Of The Ordering Party. 5. The Bid Form (Appendix No. 1) should include the Gross Bid Price, which must specify the total valuation of the Subject of the Order. 6. The Bid Price must include all remuneration elements due to the Contractor resulting from the preparation, execution and settlement of the Subject of the Order, including all requirements of this Bid, and include all direct and indirect costs that the Contractor will incur for the correct and timely execution of the entire Subject of the Order, profit and all taxes and fees required by law. The price must also include the risk of an increase in the costs of execution of the Subject of the Order. 7. The price should be given in Polish zlotys in digital and verbal form, rounded to two decimal places. 8. The price given in the Bid Form should be a fixed price (lump sum) throughout the entire period of execution of the Subject of the Order. 9. The Price of the Service Given Must Include All Contractor's Costs, And Bidding Is Made Based on Gross Prices. 10. The Ordering Party Does Not Allow Submission of Partial Bids. The Contractor Is Obliged to Submit a Bid for the Entire Order. 11. The Contractor May Order the Performance of Some Tests to Other Entities Authorized to Perform Them. The Costs of These Orders Are Charged to the Contractor. 12. The Ordering Party Will First Evaluate the Bids, And Then Check Whether the Contractor Whose Bid Was Evaluated as the Most Advantageous Meets the Conditions for Participation in the Proceedings. 13. During the Examination and Evaluation of Bids, the Ordering Party May Request the Contractor to Provide Explanations Regarding the Content of the Bids Submitted. The Ordering Party will correct obvious clerical errors and calculation errors in the content of the Offer, taking into account the accounting consequences of the corrections made, immediately notifying the Contractor whose offer has been corrected. 14. The Ordering Party requires the Contractor to conclude a Public Procurement Agreement with it on the terms specified in the Draft Agreement constituting Annex No. 3 to this Offer. 15. The selected Contractor is obliged to contact the Ordering Party within two business days from the date of notification of the selection in order to agree on the final content of the Agreement and set the deadline for concluding the Agreement. 16. The Ordering Party reserves that the Proceedings may end with the lack of selection of the Offer in the event of exceeding the estimated funds or invalidation of the Proceedings without providing reasons. 17. Please Submit All Inquiries Through the Purchasing Platform. In the event of any problems with submitting an Offer, please contact the Eb2b Helpdesk Department - contact in the footer of the Website. V. Offer Selection Criteria: 1. The Ordering Party will award the Order to the Contractor whose Offer meets the Requirements Specified in this Inquiry and is considered the most advantageous. 2. When selecting the Offer, the Ordering Party will be guided by the following criteria, to which the following weights have been assigned: C - Gross Value of the Entire Order (Offer price): 90% N - Fulfillment of the Order by Disabled Persons Within the Meaning of the Act of 27 August 1997 on Vocational and Social Rehabilitation and Employment of Disabled Persons: 10% 3. The Offer will be assigned Points According to the Formula: P = C+n P - Total Number of Points; C – Number of Points in the Criterion “Gross value of the Total Order (Bid price)”; N – number of Points in the Criterion “fulfillment of the Order by Disabled Persons Within the Meaning of the Act of 27 August 1997 on Vocational and Social Rehabilitation and Employment of Disabled Persons”. 4. Method of Evaluating Offers in the Criterion “Gross value of the Total Order (Bid price)”: C = (lowest Price Among the Examined Offers): (price of the Examined Offer) * 90 Points The Result of the Above Operation Will Be Rounded to 2 Decimal Places. 5. Method of Evaluating the Offer in the Criterion “implementation of the Order by Disabled Persons within the Meaning of the Act of 27 August 1997 on Vocational and Social Rehabilitation and Employment of Disabled Persons”: A) Points in This Criterion Will Be Awarded Based on the Contractor’s Declaration Contained in Annex No. 1 (Offer Form). B) Offers Will Be Awarded Points in the Following Manner: · For Employing At Least One Disabled Person to Execute the Subject Order – Offer Will Receive 10 Points (n= 10 Points) · For Not Employing the Above-mentioned Person, Offer Will Receive 0 Points (n = 0 Points). 6. The Contractor is Obliged to Indicate in the "Offer Form" (Appendix No. 1) Whether He Will Employ At Least One Disabled Person to Execute the Subject Order Within the Meaning of the Act of 27 August 1997 on Vocational and Social Rehabilitation and Employment of Disabled Persons. 7. If the Contractor Does Not Indicate in the "Offer Form" (Appendix No. 1) Whether He Will Employ the Above Person, the Ordering Party Will Consider That the Contractor Will Not Execute the Order With the Participation of a Disabled Person and Will Award the Contractor 0 Points. 8. If the Contractor Proves That He Will Employ At Least One Disabled Person to Execute the Subject Order, He Will Be Obliged to Employ a Disabled Person Within a Period Not Longer Than 30 Days from the Date of Conclusion of the Agreement Continuously Throughout the Duration of the Agreement. 9. If the Contractor proves that it will employ at least one disabled person to perform the subject order, and in fact this will not happen during the term of the contract, it will be called upon by the Ordering Party to pay contractual penalties. The amount of the penalty will be specified in the contract. Vi. Payment terms: 1. The Ordering Party undertakes to pay the amounts due for the services performed within 30 days of delivery of a correctly issued invoice, by transfer to the settlement account indicated in the invoice, included in the list of taxpayers (so-called "white list"). The Ordering Party will refuse to pay for an incorrectly issued invoice. 2. The basis for issuing a VAT invoice will be the Specification of Medical Services in the scope of initial and periodic examinations of persons performing underwater works and periodic examinations of police officers carried out by authorized doctors. 3. The Contractor shall issue an invoice to the Provincial Police Headquarters in Krakow, ul. Mogilska 109, 31-571 Krakow, Tax Identification Number (NIP): 675-000-55-94, taking into account the services performed. 4. The invoice, together with the attached medical reports, referrals for examination and specification of services, should be delivered to the Human Resources Department of the Provincial Police Headquarters in Krakow, ul. Mogilska 109, 31-571 Krakow. 5. The Ordering Party reserves the right to reduce the value of the Contract in the event of a reduction in the number of services actually performed by the Contractor, while the Contractor shall not be entitled to any claims in this respect. Vii. Order Fulfillment Deadline: 1. The Ordering Party requires the conclusion of an Agreement with validity from the date of conclusion until 31.12.2025, but not longer than until the value of the concluded Agreement is used. 2. The Ordering Party is entitled to unilaterally withdraw from the Agreement in whole or in part with immediate effect in the following cases: A) Entry into force of new regulations, regulations repealing or changing the legal status in the scope of periodic and control examinations of police officers, border guards and state protection guards, periodic preventive medical examinations of firefighters of the state fire service, initial, periodic and control examinations of employees of the above-mentioned services and employees of the Ministry of Internal Affairs and Administration, concerning in particular the organization of their provision, conclusion of agreements or orders, B) In the event of introduction of changes in the organization of the provision of examinations referred to in letter A, conclusion of agreements or orders for these examinations, consisting in particular in entrusting their implementation to services established for this purpose. 3. The Ordering Party Is Entitled to Withdraw From the Contract Within 30 Days From the Date When the Circumstances Justifying Withdrawal Occur. 4. In the Event of Withdrawal From the Contract, the Contractor shall have no other claims from the Ordering Party, apart from the Claim for Remuneration Due to Him for the Performance of Part of the Contract. Viii. Contact Person for the Contractors in Substantive Scope: The persons authorized to contact the Contractors are: 1. Ms. Ewelina Półtorak, E-mail: Ewelina.poltorak@malopolska.policja.gov.pl, Tel. 47 83-54-042, 2. Ms. Barbara Harmacińska, E-mail: Barbara.harmacinska@malopolska.policja.gov.pl, Tel. 47 83-51-906, 3. Ms. Grażyna Osetek, Email: Grazyna.osetek@malopolska.policja.gov.pl, Tel. 47 83-56-610. Ix. Additional Information: Pursuant to Art. 13 Sec. 1-3 of Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ EU L 119, 4.5.2016, p. 1), hereinafter referred to as “GDPR”, I hereby inform you that: 1) the Administrator of your Personal Data is the Provincial Police Commander in Kraków, Ul. Mogilska 109, 31-571 Kraków; 2) The contact details of the Data Protection Supervisor are as follows: Mł. Asp. Robert Pasiut, Email: Iod.kwp@malopolska.policja.gov.pl, Correspondence Address: Ul. Mogilska 109, 31-571 Kraków; 3) Your Personal Data Will Be Processed Pursuant to Art. 6 Sec. 1 Letter b) of the GDPR For the Purpose Related to This Proceeding; 4) The recipients of your Personal Data will be Persons or Entities to whom the Proceeding Documentation Will be made available Based on Art. 18 and Art. 74 of the Public Procurement Act Or On the Basis of the Act of 6 September 2001 on Access to Public Information (i.e. Journal of Laws of 2022, item 902); 5) Your Personal Data Will Be Stored In Pursuant to Art. 78 Sec. 1 Pzp, For A Period of 4 Years From the Date of Completion of the Proceedings, And If The Duration of the Contract Exceeds 4 Years, The Retention Period Covers the Entire Duration of the Contract / Compliant with Archiving Regulations; 6) The obligation to provide personal data directly concerning you is a statutory requirement specified in the provisions of the Pzp Act, related to participation in the public procurement procedure; The consequences of failure to provide certain data result from the Pzp Act; 7) With respect to your personal data, decisions will not be made in an automated manner, pursuant to Art. 22 of the GDPR; 8) you have: − Pursuant to Art. 15 of the GDPR, the right to access the personal data concerning you; − Pursuant to Art. 16 of the GDPR, the right to rectify your personal data; - Under Art. 18 of the GDPR, the Right to Demand that the Controller Limit the Processing of Personal Data, Subject to the Cases Referred to in Art. 18 Sec. 2 of the GDPR; - The Right to Lodging a Complaint to the President of the Office for Personal Data Protection, If You Consider That the Processing of Personal Data Concerning You Infringes the Provisions of the GDPR; 9) You are not entitled to: - In Connection with Art. 17 Sec. 3 Letters B, D Or E of the GDPR, the Right to Have Personal Data Deleted; - The Right to Transfer Personal Data, Referred to in Art. 20 of the GDPR; - Under Art. 21 of the GDPR, the Right to Object to the Processing of Personal Data, As the Legal Basis for the Processing of your Personal Data Is Art. 6 Sec. 1 Letters CIE (ic) GDPR. 10) Your exercise of the right to rectify or supplement, referred to in Art. 16 GDPR, may not result in a change in the outcome of the procurement procedure or in a change in the provisions of the public procurement agreement to the extent inconsistent with the Act; 11) In the procurement procedure, the submission of a request to limit the processing, referred to in Art. 18 Section 1 GDPR, does not limit the processing of personal data until the completion of this procedure; 12) You have the right to lodge a complaint with the supervisory authority regarding the processing of your personal data by the administrator that is inconsistent with the GDPR. The competent authority for this complaint is the Office for Personal Data Protection, Ul. Stawki 2, 00-193 Warsaw. Attachments: Attachment No. 1: Offer Form. Appendix No. 2: Price Form. Appendix No. 3: Draft Agreement.

Details: Description Bids And Awards Committee Iloilo Provincial Government Procurement Of Multi-purpose Vehicle Bid No. Acc-24-1846-b(rebid) Philippine Bidding Documents Sixth Edition July 2020 Table Of Contents Section I. Invitation To Bid……………………………………………………..3 Section Ii. Instructions To Bidders………………………………………..…...5 1. Scope Of Bid ………………………………………………………………………. 5 2. Funding Information………………………………………………………………. 5 3. Bidding Requirements ……………………………………………………………. 5 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 5 5. Eligible Bidders…………………………………………………………………… 5 6. Origin Of Goods ………………………………………………………………….. 6 7. Subcontracts ……………………………………………………………………… 6 8. Pre-bid Conference ………………………………………………………………. 7 9. Clarification And Amendment Of Bidding Documents …………………………… 7 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 7 11. Documents Comprising The Bid: Financial Component …………………………... 7 12. Bid Prices …………………………………………………………………………. 8 13. Bid And Payment Currencies ……………………………………………………… 8 14. Bid Security ………………………………………………………………………. 8 15. Sealing And Marking Of Bids ……………………………………………………… 9 16. Deadline For Submission Of Bids …………………………………………………. 9 17. Opening And Preliminary Examination Of Bids ………………………………….. 9 18. Domestic Preference ……………………………………………………………… 9 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 9 20. Post-qualification ………………………………………………………………… 10 21. Signing Of The Contract …………………………………………………………… 10 Section Iii. Bid Data Sheet …………………………………………………..11 Section Iv. General Conditions Of Contract ……………………...………..12 1. Scope Of Contract ………………………………………………………………… 12 2. Advance Payment And Terms Of Payment ……………………………………….. 12 3. Performance Security ……………………………………………………………. 12 4. Inspection And Tests ……………………………………………………………… 12 5. Warranty …………………………………………………………………………. 13 6. Liability Of The Supplier ………………………………………………………….. 13 Section V. Special Conditions Of Contract ………………………………….14 Section Vi. Schedule Of Requirements ……………………………………....16 Section Vii. Technical Specifications …………………………………………17 Section Viii. Checklist Of Technical And Financial Documents …………..19 Section I. Invitation To Bid Purchase Of Multi-purpose Vehicle Bid No. Acc-24-1846-b(rebid) 1. The Iloilo Provincial Government Through The Supplemental Budget No.1 Cy 2024 Capital Outlay Intends To Apply The Sum Of One Million Nine Hundred Thousand Pesos (php 1,900,000.00) Being The Abc To Payments Under The Contract For The Purchase Of Multi-purpose Vehicle Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 30 Calendar Days Upon Receipt Of The Notice To Proceed (ntp). Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat Of The Iloilo Provincial Government And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 3, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php5000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Iloilo Provincial Government Will Hold A Pre-bid Conference On February 10, 2025 At The 5th Floor Bac Secretariat Office, Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City And/or Through Video Conferencing Or Webcasting, Upon Request At Least Three (3) Days Before The Pre-bid Conference, Via Zoom Or Other Videoconferencing Portals, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The 5th Floor Bac Secretariat Office, Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City On Or Before February 27, 2025 At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On February 27, 2025 At 9:01 A.m. At The 5th Floor Bac Secretariat Office, Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. A. The Participating Bidder/supplier Or Its Authorized Representative Must Indicate In Any Of The Eligibility Documents, An Email Address Or A Working Fax Number. The Absence Of Which Shall Be A Ground For Disqualification. Notice To The Bidder/supplier Through The Use Of Either Of These Means (email/fax) Is Considered Sufficient Notice. The Date Of Filing Of Reconsideration And All Communications With The Bac Shall Be Its (bac) Date Of Receipt. B. The Bidder(s)/awardee(s) Or Its Authorized Representative Must Conform To The Notice Of Award Within Three (3) Calendar Days From Receipt Of Such Notice And The Winning Bidder Shall Post The Required Performance Security And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award In Accordance With Section 37.2.1 Of The Revised Irr Of R.a. No. 9184. C. The Bidder/supplier Must Have No Pending Unaccepted Notice To Proceed Three (3) Days From The Date Of Acceptance And Signing Of The Purchase Order. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. D. The Bidder/supplier Must Have No Notice Of Award Pending Its Conformity Three (3) Days From The Date Of Its Receipt Of The Notice Of Award. Otherwise, It Shall Be Aground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. E. The Bidder/supplier Shall Submit A List Of All Its Ongoing And Completed Projects With The Iloilo Provincial Government Indicating The Delivery Periods And Accomplishments Of Such Projects. F. The Bidder/supplier At The Time Of The Bidding Must Have No Pending Unposted Performance Or Warranty Security, As The Case May Be, Beyond The Period Allowed In The Notice Of Award. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. G. When An Occurrence Of A Tie Among Bidders Takes Place, I.e., Two Or More Of The Bidders Are Determined And Declared As The Lowest Calculated And Responsive Bidder (lcrb), The Winning Bidder Shall Be Determined By Draw Lots Upon Notice To The Bidders Concerned And/or Their Authorized Representatives In Accordance With The Relevant Circulars Issued By The Government Procurement Policy Board (gppb). 11. The Iloilo Provincial Government Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Bac Secretariat Head 5th Floor, Bids And Awards Committee Iloilo Provincial Capitol Email Address: Ipg_bacs@yahoo.com Website: Iloilo.gov.ph Telephone Number: (033) 336-0736 13. You May Visit The Following Websites For Downloading Of Bidding Documents: Ipg.gov.ph And/or Philgeps.com January 29, 2025 Atty. Dennis T. Ventilacion Chairman, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Iloilo Provincial Government Wishes To Receive Bids For The Purchase Of Multi-purpose Vehicle With Bid No. Acc-24-1846-b (rebid) The Procurement Project (referred To Herein As “project”) Is Composed Of One(1) Item, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2024 In The Amount Of One Million Nine Hundred Thousand Pesos (php 1,900,000.00) The Source Of Funding Is: Gunian. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. B. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. C. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: [select Either Failure Or Monopoly Of Bidding Based On Market Research Conducted] I. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And Ii. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time At Its Physical Address As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Complete Bid - One Project Having Several Items That Shall Be Awarded As One Contract In Case Of Complete Bid. Line Bidding/partial Bidding - One Project Having Several Items, Which Shall Be Awarded As Separate Contracts Per Item 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Refers To The Contracts To Be Bid Or The Object Of The Contract; B. Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed. 12 The Price Of The Goods Shall Be Quoted Ddp Office Of The Provincial Accountant Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Five Percent (5%) Of Abc, If Bid Security Is In Surety Bond. 15 Bidders Shall Prepare An Original Of The First (eligibility And Technical) And Second (financial) Envelopes. In Addition, Bidders Shall Submit Separate Copies Of The First And Second Envelopes (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. 19.3 No Further Instructions. 20.2 For The Procurement Of Drugs And Medicines And Medical Equipment/supplies, The Bidder Shall Submit The Following: A. Certificate Of Product Registration From Food And Drug Administration (fda) For Easy Validation During The Post-qualification; B. Certificate If Good Manufacturing Practice From Fda, For Easy Validation During The Post-qualification; C. Batch Release Certificate From Fda, For Easy Validation During The Post-qualification; D. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/ Dealer Of The Products / Items For Easy Validation During The Post-qualification; E. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license: S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer); F. License To Operate (lto) Issued By Fda, If Applicable; G. After-sales Services/parts, If Applicable; H. Manpower Requirements, If Applicable. 21.2 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Iv (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 6.1. In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 6.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines, State:] “the Delivery Terms Applicable To This Contract Are Delivered To Office Of The Provincial Accountant. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The Authorized Employee/official Of The Iloilo Provincial Government. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. 2.2 Partial Payment Is Not Allowed. 4 The Inspections And Tests That Will Be Conducted Are Through Physical Inspection. Item Number Description Quantity Total Delivered, Weeks/months 1 Multi-purpose Vehicle 1 1 Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. _______________________ Signature Over Printed Name Section Vii. Technical Specifications Bid No.: Acc-24-1846-b(rebid) Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Multi-purpose Vehicle With The Following Specifications: Seating Capacity: Maximum Of 8 Seats Engine: In-line 4-cylinder, 16 Valve Double Overhead Camshaft With Intercooler Turbo Charger Or Its Equivalent Displacement: ( 2,700- 2800) Cc Max Output: 174 Ps (minimum) Max Torque: 360 Nm (minimum) Transmission: 6 Speed Automatic (minimum) Suspension (front/rear): Independent, Double Wishbone With Coil Spring/4-link With Coil Spring Brakes(front/rear):ventilated Discs/leading-trailing Drum Tires/wheels: 205/65 R16 Alloy Other Features: Air-conditioning And Audio System, Speed Sensing Door Locks, Power Windows, Keyless Entry, Light Control System Safety Features: Anti-lock Brakes System, Vehicle Stability Control, Seat Belts, Airbags, Emergency Brake Signal, Reverse Camera And Clearance And Back Sonar Fuel: Diesel Fed Terms And Conditions 1. The Vehicle Shall Be Delivered To Iloilo Provincial Capitol, Iloilo City Thirty (30) Calendar Days After Receipt Of Notice To Proceed. 2. Warranty Period Shall Be 36 Months After Acceptance, Or A Milleage Of One Hundred Thousand (100,000) Kilometers, Whichever Comes First. 3. The Bidder Shall Have A Service Center In Iloilo City Or An Agreement With A Service Center In Iloilo City To Do After Sales Which May Be Submitted During Post-qualification. 4. The Dealer Shall Install Stickers Of Iloilo Provincial Government Official Logo And The Word " For Official Use Only" On Both Sides Of The Front Door. 5. The Dealer Shall Shoulder The First Three (3) Years Lto Registration And One (1) Year Gsis Comprehensive Insurance. 6. The Dealer Should Provide For Car Matting, Window Tint, And Seat Cover. _______________________ Signature Over Printed Name Section Viii. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages);or ⬜ (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document, And ⬜ (c) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And ⬜ (d) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (i) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (j) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (k) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc); Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (l) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (m) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (n) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (o) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (p) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.

Details: Description Price Schedule / Bid Tender Name Of Bidder: _____________________________________________ Bid No.: Spo-25-33-b Complete Bid Partial Bid 1 2 3 4 5 6 7 8 9 10 11 12 Item Description Quantity Unit Estimated Unit Cost Brand Name (indicate Model Number If Equipment) (indicate N/a If No Brand) Unit Price Per Item Transportation And All Other Costs Incidental To Delivery, Per Item Sales And Other Taxes Payable If Contract Is Awarded, Per Item Cost Of Incidental Services, If Applicable, Per Item Total Unit Price (col 7+8+9+10) Total Price Delivered Final Destination (col 11) X (col 3) 1 Publication Of Resolution No. 2024-913, Resolution Embodying Provincial Ordinance No. 2024-329, “an Ordinance Updating The Schedule Of Market Values Of Real Properties And Other Improvements Relative To The General Revision Of Real Property Assessments Of The Province Of Iloilo.’’ Terms & Condition: 1. Ten (10) Pages Per Issue; 2. Three (3) Consecutive Issues; And In A 3. Newspaper Of Daily Publication For Three (3) Consecutive Days 3 Issue 100,000.00 2 Abc: Three Hundred Thousand Pesos(₱300,000.00) _______________________________________________ Name Of Establishment ______________________________________________ Signature Over Printed Name Of Proprietor Or Authorized Representative Bids And Awards Committee Iloilo Provincial Government Publication Of Provincial Ordinance On Market Values Bid No. Spo-25-33-b Philippine Bidding Documents Sixth Edition July 2020 Table Of Contents Section I. Invitation To Bid……………………………………………………..2 Section Ii. Instructions To Bidders………………………………………..…...2 1. Scope Of Bid ………………………………………………………………………. 2 2. Funding Information………………………………………………………………. 2 3. Bidding Requirements ……………………………………………………………. 2 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 2 5. Eligible Bidders…………………………………………………………………… 2 6. Origin Of Goods ………………………………………………………………….. 2 7. Subcontracts ……………………………………………………………………… 2 8. Pre-bid Conference ………………………………………………………………. 2 9. Clarification And Amendment Of Bidding Documents …………………………… 2 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 2 11. Documents Comprising The Bid: Financial Component …………………………... 2 12. Bid Prices …………………………………………………………………………. 2 13. Bid And Payment Currencies ……………………………………………………… 2 14. Bid Security ………………………………………………………………………. 2 15. Sealing And Marking Of Bids ……………………………………………………… 2 16. Deadline For Submission Of Bids …………………………………………………. 2 17. Opening And Preliminary Examination Of Bids ………………………………….. 2 18. Domestic Preference ……………………………………………………………… 2 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 2 20. Post-qualification ………………………………………………………………… 2 21. Signing Of The Contract …………………………………………………………… 2 Section Iii. Bid Data Sheet …………………………………………………..2 Section Iv. General Conditions Of Contract……….……………...………..2 1. Scope Of Contract ………………………………………………………………… 2 2. Advance Payment And Terms Of Payment ……………………………………….. 2 3. Performance Security ……………………………………………………………. 2 4. Inspection And Tests ……………………………………………………………… 2 5. Warranty …………………………………………………………………………. 2 6. Liability Of The Supplier ………………………………………………………….. 2 Section V. Special Conditions Of Contract ………………………………….2 Section Vi. Schedule Of Requirements ……………………………………....2 Section Vii. Technical Specifications …………………………………………2 Section Viii. Checklist Of Technical And Financial Documents …………..2 Section I. Invitation To Bid Publication Of Provincial Ordinance Bid No. Spo-25-33-b 1. The Iloilo Provincial Government Through The 2025 Ppmp Intends To Apply The Sum Of Three Hundred Thousand Pesos (₱300,000.00) Being The Abc To Payments Under The Contract For The Publication Of Provincial Ordinance. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 14 Days Upon Receipt Of The Notice To Proceed (ntp). Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat Of The Iloilo Provincial Government And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 6, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (₱500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Iloilo Provincial Government Will Hold A Pre-bid Conference On N/a And/or Through Video Conferencing Or Webcasting, Upon Request At Least Three (3) Days Before The Pre-bid Conference, Via Zoom Or Other Videoconferencing Portals, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The 5/f, Bac Secretariat Office, Iloilo Provincial Capitol On Or Before February 13, 2025 At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On February 13, 2025 At 9:01 A.m. At The 5/f, Bac Secretariat Office, Iloilo Provincial Capitol. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. A. The Participating Bidder/supplier Or Its Authorized Representative Must Indicate In Any Of The Eligibility Documents, An Email Address Or A Working Fax Number. The Absence Of Which Shall Be A Ground For Disqualification. Notice To The Bidder/supplier Through The Use Of Either Of These Means (email/fax) Is Considered Sufficient Notice. The Date Of Filing Of Reconsideration And All Communications With The Bac Shall Be Its (bac) Date Of Receipt. B. The Bidder(s)/awardee(s) Or Its Authorized Representative Must Conform To The Notice Of Award Within Three (3) Calendar Days From Receipt Of Such Notice And The Winning Bidder Shall Post The Required Performance Security And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award In Accordance With Section 37.2.1 Of The Revised Irr Of R.a. No. 9184. C. The Bidder/supplier Must Have No Pending Unaccepted Notice To Proceed Three (3) Days From The Date Of Acceptance And Signing Of The Purchase Order. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. D. The Bidder/supplier Must Have No Notice Of Award Pending Its Conformity Three (3) Days From The Date Of Its Receipt Of The Notice Of Award. Otherwise, It Shall Be Aground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. E. The Bidder/supplier Shall Submit A List Of All Its Ongoing And Completed Projects With The Iloilo Provincial Government Indicating The Delivery Periods And Accomplishments Of Such Projects. F. The Bidder/supplier At The Time Of The Bidding Must Have No Pending Unposted Performance Or Warranty Security, As The Case May Be, Beyond The Period Allowed In The Notice Of Award. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. G. When An Occurrence Of A Tie Among Bidders Takes Place, I.e., Two Or More Of The Bidders Are Determined And Declared As The Lowest Calculated And Responsive Bidder (lcrb), The Winning Bidder Shall Be Determined By Draw Lots Upon Notice To The Bidders Concerned And/or Their Authorized Representatives In Accordance With The Relevant Circulars Issued By The Government Procurement Policy Board (gppb). 11. The Iloilo Provincial Government Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Bac Secretariat Head 5/f, Bids And Awards Committee Iloilo Provincial Capitol Email Address: Ipg_bacs@yahoo.com Website: Iloilo.gov.ph Telephone Number: (033) 336-0736 13. You May Visit The Following Websites For Downloading Of Bidding Documents: Ipg.gov.ph And/or Philgeps.com Atty. Dennis T. Ventilacion Chairman, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Iloilo Provincial Government Wishes To Receive Bids For The Publication Of Provincial Ordinance With Bid No. Spo-25-33-b. The Procurement Project (referred To Herein As “project”) Is Composed Of One(1) Item, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2025 Ppmp In The Amount Of Three Hundred Thousand Pesos(₱300,000.00). 2.2. The Source Of Funding Is: Lgus, The Annual Or Supplemental Budget As Approved By The Sanggunian. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. B. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. C. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: [select Either Failure Or Monopoly Of Bidding Based On Market Research Conducted] I. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And Ii. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause5.3 Should Have Been Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty(120) Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time At Its Physical Address As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Complete Bid - One Project Having Several Items That Shall Be Awarded As One Contract In Case Of Complete Bid. Line Bidding/partial Bidding - One Project Having Several Items, Which Shall Be Awarded As Separate Contracts Per Item 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Refers To The Contracts To Be Bid Or The Object Of The Contract; B. Completed Within Three(3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed. 12 The Price Of The Goods Shall Be Quoted Ddp [state Place Of Destination] Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Five Percent (5%) Of Abc, If Bid Security Is In Surety Bond. 15 Bidders Shall Prepare An Original Of The First (eligibility And Technical) And Second (financial) Envelopes. In Addition, Bidders Shall Submit Separate Copies Of The First And Second Envelopes (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. 19.3 No Further Instructions. 20.2 For The Procurement Of Drugs And Medicines And Medical Equipment/supplies, The Bidder Shall Submit The Following: A. Certificate Of Product Registration From Food And Drug Administration (fda) For Easy Validation During The Post-qualification; B. Certificate If Good Manufacturing Practice From Fda, For Easy Validation During The Post-qualification; C. Batch Release Certificate From Fda, For Easy Validation During The Post-qualification; D. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/ Dealer Of The Products / Items For Easy Validation During The Post-qualification; E. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license: S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer); F. License To Operate (lto) Issued By Fda, If Applicable; G. After-sales Services/parts, If Applicable; H. Manpower Requirements, If Applicable. 21.2 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Iv (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 6.1. In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 6.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines, State:] “the Delivery Terms Applicable To This Contract Are Delivered To The Province Of Iloilo. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The Authorized Employee/official Of The Iloilo Provincial Government. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. 2.2 Partial Payment Is Not Allowed. 4 The Inspections And Tests That Will Be Conducted Are Through Physical Inspection. Item Number Description Quantity Total Delivered, Weeks/months 1 Publication Of Resolution No. 2024-913, Resolution Embodying Provincial Ordinance No. 2024-329, “an Ordinance Updating The Schedule Of Market Values Of Real Properties And Other Improvements Relative To The General Revision Of Real Property Assessments Of The Province Of Iloilo. Terms & Condition: 1. Ten (10) Pages Per Issue; 2. Three (3) Consecutive Issues; And In A 3. Newspaper Of Daily Publication For Three (3) Consecutive Days 3 2 3 Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. ___________________________________ Signature Over Printed Name Section Vii. Technical Specifications Bid No. Spo-25-33-b Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Publication Of Resolution No. 2024-913, Resolution Embodying Provincial Ordinance No. 2024-329, ‘’an Ordinance Updating The Schedule Of Market Values Of Real Properties And Other Improvements Relative To The General Revision Of Real Property Assessments Of The Province Of Iloilo. Terms & Condition: 1. Ten (10) Pages Per Issue; 2. Three (3) Consecutive Issues; And In A 3. Newspaper Of Daily Publication For Three (3) Consecutive Days 2 3 4 ___________________________________ Signature Over Printed Name Section Viii. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages); Or ⬜ (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document, And ⬜ (c) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And ⬜ (d) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (i) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (j) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (k) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc); Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (l) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (m) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (n) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (o) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (p) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.

Details: Preparation of a draft act of entrustment under EU state aid law by the state of Brandenburg to the Medical University of Lausitz - Carl Thiem. As of July 1, 2024, the state of Brandenburg has established the Medical University of Lausitz - Carl Thiem (mul-ct) as a legal entity under public law with the legal and organizational integration of the university hospital in accordance with Section 1 Paragraph 1 Sentence 1 of the Brandenburg University Medicine Act (bbgunimedg). The state is the guarantor of the Mul-ct in accordance with Section 8 Paragraph 13 Bbgunimedg. The Mul-ct falls within the portfolio of the Ministry of Science, Research and Culture of the State of Brandenburg (mwfk). The Mul-ct's integrated university hospital is a hospital of the highest level of care and has clinics with a total of around 1,200 planned beds. The Mul-ct is the sole shareholder of four subsidiaries and the majority shareholder of a subsidiary that serve the operation of the Mul-ct. Including its subsidiaries, around 3,200 people are employed at the university hospital. According to Section 2, Paragraph 4, Sentence 1 of the Bbgunimedg, the tasks of the Mul-ct in healthcare include in particular public healthcare, with the city of Cottbus/chósebuz being exempted from its obligation to provide healthcare under Section 1 of the Brandenburg Hospital Development Act (bbgkheg). According to Section 2, Paragraph 4, Sentence 2 of the Bbgunimedg, healthcare serves to fulfil the tasks of the Mul-ct in research, teaching, and system and future tasks. According to Section 6, Paragraph 1 of the Bbgunimedg, the Mul-ct identifies the needs in healthcare required to fulfil its tasks in research, teaching, and system and future tasks and how these are covered by the Mul-ct in its university hospital planning. According to Section 6 Paragraph 3 Bbgunimedg, the Mwfk determines the university clinic planning by written notice (determination notice). The determination notice establishes the care mandate of the Mul-ct. Until this determination notice is issued for the first time, the determination notice according to Section 14 Paragraph 1 Bbgkheg remains valid for inclusion in the hospital plan in the currently applicable version. Due to the short period of time since the Mul-ct was established on July 1, 2024, there is still no university clinic planning for the Mul-ct. According to Section 12 Paragraph 6 Bbgkheg, the university clinic planning and the state's hospital planning must be coordinated with one another. The care mandate of the Mul-ct in accordance with the university clinic planning determined in accordance with Section 6 Bbgunimedg is to be taken into account in hospital planning as specified with an effect that covers needs. The MWFK intends to issue an entrustment act on behalf of the state of Brandenburg to MUL-CT and possibly its subsidiaries with regard to public services in health care on the basis of the so-called DAWI exemption decision of the EU Commission (OJ EU L 7/3 of 11 January 2012). The aim is to create a legal basis for the granting of compensation by the state to MUL-CT and its subsidiaries in accordance with EU state aid law and other relevant legal provisions. In preparation for the decree, a contractor is to prepare a draft of a corresponding entrustment act, examining the relevant legal issues.

Details: Description Invitation To Bid Project No: 005 – 2025 1. The Department Of Education Through The Fy 2024 Gaa Intends To Apply The Sum Of Seven Million Three Hundred Thirty-eight Thousand Five Hundred Seven And 00/100 (7,338,507.00) Being The Approved Budget For The Contract (abc) Described Below For The Procurement Of Assistive Devices, Equipment, Supplies And Materials For Inclusive Learning Resource Centers. Bids Received In Excess Of Abc Shall Be Automatically Rejected At The Bid Opening. Unit Description Qty Cost Abc (vat Inclusive) 1 Lot Procurement Of Assistive Devices, Equipment, Supplies And Materials For Inclusive Learning Resource Centers 1 1 Unit Learners'/clients' Chart Materials A4 Size 8-1/4 X 11-3/4 Inches Or 210 X 297 Mm Or 29.7 X 21 Cm Laminated Full Color High Quality Print Photopaper 10 70.00 700.00 2 Set Anatomical Model-human Torso Model Size: 1/2 Life Size Material: Pvc, Includes: Stand 1 62,918.00 62,918.00 3 Unit Blood Pressure-blood Pressure Monitor Type: Upper-arm Monitor Type: Digital Cuff Size: 32cm Dimension (w X H X D): 145 X 466 X 145mm Weight: 250g Power Supply: Battery Type: Li-polymer Smart App Availability: Yes, Automatic Shut Off: Wi-fi: No 5 6,560.00 32,800.00 4 Unit Stethoscope: Dual Tube Stethoscope Weight: 185g, Length: 80cm Product Material: Polymer Diaphragm, Listener Material: High-density Stainless Steel Product Composition: Eartip, Ear Hooks, Leaf Spring, Hose Heads, Diaphragms 2 1,380.00 2,760.00 5 Piece Tape Measure-material: Pvc It Has Centimeter Scale On Reverse Side Which Is Up To 300cm Large, Easy To Read Marking Measures Up To 120 Inches 10 300.00 3,000.00 6 Piece Hand Dynamometer - Hand Dynamometer Type: Electronic Counting Gripper Function: Comprehensive Fitness Exercise Material: Abs Size: 15cm/5.90""x10.5cm/4.13""x2cm/0.79"" 10 1,900.00 19,000.00 7 Packs Ice Massage Caps- Size: 2 Count (pack Of 1) Measuring 2.9” In Diameter, The Ice Cup Massager Holder Also Fits Comfortably In The Hand. Material: Polyethylene 10 700.00 7,000.00 8 Unit Balance Board- Balance Board Type: Rocker Board Dimensions: 32.28 X 11.81 X 0.59 Inches Weight Capacity: 100 Kg Material: Beech Wood Anti-skid Feature: Not Specified 5 3,700.00 18,500.00 9 Unit Treatment Table- Top Shelf With Guard Rail And Formica Material. Down Shelf, Material Plain Sheet. Mounted On 4 Swivel Caster Rubber Wheels 2″ With 2 Pieces Lock. Size: Lxwxh (28″x20″x34.5″) Painted White 1 17,400.00 17,400.00 10 Unit Exercise Steps-aerobic Step Board 69 X 28 X 15cm. Dimension: 69 X 28 X 15cm Length: 27" Width: 10.5" Adjustable Height Up To 10cm To 15cm. Offers A Secure, Nonslip Surface For Your Workout Routine, Nonskid, Feet Provide Stability & Protect Floors. 5 1,934.00 9,670.00 11 Pair Pediatric Examination Gowns- Assorted For Kids And Adult Pediatric Examination Gowns Opening: Full Open Back. Style: Child Size Color: Jellybean Print. Made With High Quality, 100% Cotton Comfortable, Durable, Washable, And Reusable Hook And Loop Closures At Neck And Mid-back. 10 700.00 7,000.00 12 Piece Towels- Material: High Quality 100% Cotton Terry. 500gm2. Size: 90 X 180cm. 20 300.00 6,000.00 13 Piece Bed Sheets- Material: Cotton + Polyester, Packaging Content: 2 Pcs Pillowcase, 1 Pc Fitted Sheet, Single Size:36"*75"+7.8", Pillowcase Size: 18'*28", Garterized Corners 20 2,000.00 40,000.00 14 Piece Pillows- Pillows, Plain White, Soft Pillow, Size:18x28 Inches 10 900.00 9,000.00 15 Piece Pillowcase- Length: 50 Cm (20 ") Pillowcase Quantity: 1 Piece Width: 80 Cm (31 ") 100 % Polyester 20 180.00 3,600.00 16 Piece Blankets- Length: 160 Cm White Sheet Soft Texture, High Quality Fabric Size: 52 X 90 Inch 20 450.00 9,000.00 17 Unit Step Stools - Step Stools Double Steel Caravan Step. Rubber Non- Slip Steps. Leg Distance Front To Back 65 Cm. Width 42 Cm. Top Step Height 38 Cm. Bottom Step 20 Cm. 5 3,600.00 18,000.00 18 Unit Therapist Stools On Wheels-adjustable Height Of 19 - 24". It Comes With A 3" Hi-density Cushion With Multi-layered Padding, And A 14" Seat Diameter. Built With 5 Casters Made Of Plastic Easy To Clean. Color: Black 5 4,950.00 24,750.00 19 Piece Kinesiology Tape-ultra-strong And Sticky-hypoallergenic Adhesive Water Resistant. 97% Cotton, 3% Nylon. 180% Stretch For Full Range Of Motion Latex And Zinc Free Sticks 2-7 Days 5-10 Applications Per Roll Each Is 2""x 16.4"" (5cmx5cm) 20 2,100.00 42,000.00 20 Set Splinting Materials - Rescue Padded Board Splint. 6 Paddes Wood Splint (different Sizes) Sizes: 35"", 25"" And 15". Velcro Straps Color: Blue. 20 4,200.00 84,000.00 21 Unit Paraffin Bath- Large Opening Design: Inner Pot Allows For Hands, Feet, And Elbows To Be Dipped Into The Melted Wax. Alloy Heating Pot Melts Paraffin Wax Blocks In 0.5 Hours. Adjustable Heating Ranges From 86-158°f. Timer: Settable From 1 To 99 Minutes. (free Installation) 2 32,340.00 64,680.00 22 Set Dumbbells Sets- Weight: 37kg Type: Medical Rehabilitation Equipment Total 18 Dumbbells 1 Lb / Piece, 2 Pieces 2 Lbs / Piece, 4 Pieces 3 Lbs / Piece, 4 Pieces 4 Lbs / Piece, 4 Pieces 5 Lbs / Piece, 4 Pieces 3 25,000.00 75,000.00 23 Set Goniometers- Protractor Goniometer With 360 Degrees Coverage To Measure Joint And Compare The Changes In Joint Angles Material: Clear Plastic 3 Goniometer: 12-inch, 8 Inch And 6 Inch 3 600.00 1,800.00 24 Set Reflex Hammer-features: Pointed Babinski-style Tip Zinc Alloy Comfortable Handle Grip Control, Hammer For High Elastic Pvc Rubber Material: Zinc Alloy + Pvc; Color: Black Package Size: 27*11*3.5cm/10.6*4.3*1.3-inch Package Weight: 140g/4.9oz. 1 8,100.00 8,100.00 25 Piece Thermometer - Body Temperature Measurement: 34.0-42.9°c / 93.2-109.2°f. Material: Abs Plastic. Accuracy: (+/-)0.2°c. Auto-shutdown Time: About 18s Power Supply: 2 * 1.5v Aaa Batteries (not Included). 1 Year Warranty 5 1,600.00 8,000.00 26 Unit Multiple Mode Electrical Stimulator-1 Second Measuring Time. 3 Color Backlight Fever Reminders Auto Shut Off At 18 Seconds Store 50 Sets Of Data. Body Temperature Measurement: 34.0-42.9°c / 93.2-109.2°f. 3 9,884.00 29,652.00 27 Piece Foam Rolls- Material: Expanded Polypropylene Foam Item Weight: 0.42 Pounds Size: 18 Inches 3 4,000.00 12,000.00 28 Piece Mobilization Belts And Devices- Size 8 Feet Specific Uses For Product. Use For Legs, Hips, Arms, Back, Whole Body - High-quality Nylon Mobilization Belt Features A Plastic Side-release Buckle And Is Designed For Durability And Patient Safety. 5 2,850.00 14,250.00 29 Piece Gait Belt-1x Transfer Gait Belt Measurement Length: 60 Inches Width: 2 Inches 5 1,458.00 7,290.00 30 Set Theraband -4 Resistance Levels, Including Yellow, Red, Green, And Blue Supplied In Lay Flat Length Of 8", 12" And 18" Latex Rubber Weight Level: Yellow: 3 Lbs-4.3 Lbs Red: 3.7 Lbs-5.5 Lbs Green: 4.6 Lbs-6.7 Lbs Blue: 5.8 Lbs-8.6 Lbs 5 10,100.00 50,500.00 31 Piece Wedge Bolsters- A Firm And Breathable Bed Wedge Pillow Stays Cool, And Its Measurements Are 25″l X 25″w X 12″h Inches. / Breathable & Washable Cover / Designed To Provide Higher Body Support. 5 6,998.00 34,990.00 32 Piece Round Bolsters-weight：0-0.5 Kg Shape：column Feature：memory Filling：microfiber Material：100% Fiber Size:8" X 36" Color：white - Ideal For Hugging, Cylindrical Pillow, Great For Side Sleepers. 5 4,800.00 24,000.00 33 Piece Core Peak Bolsters- An All-purpose Positioning Aid • Provides Support Under The Legs, Arms, Feet, And Other Areas Of The Body. Fits Standard Treatment Tables • 18" In Length With At Least 6" In Diameter. 5 9,006.00 45,030.00 34 Piece Round Bolsters-weight：0-0.5 Kg Shape：column Feature：memory Filling：microfiber Material：100% Fiber Size:8" X 36" Color：white - Ideal For Hugging, Cylindrical Pillow, Great For Side Sleepers. 5 1,500.00 7,500.00 35 Piece Core Peak Bolsters- An All-purpose Positioning Aid • Provides Support Under The Legs, Arms, Feet, And Other Areas Of The Body. Fits Standard Treatment Tables • 18" In Length With At Least 6" In Diameter. 4 1,100.00 4,400.00 36 Piece Walking Cane-adjustable Aluminum Cane With Wooden Handle, Anodized Finish And Rubber Tip. The Tube Has A Spring Lock Pin For Adjusting Handle Height From 58-94 Cm. 5 1,320.00 6,600.00 37 Piece Quad Cane -stable Structure, Thickened Stainless Steel Material. Abs Non-slip Handle, Ergonomic Design, Comfortable Grip. Spring Button For Easy Height Adjustment. Firm Lock Hoops To Stabilize The Body. 4 2,740.00 10,960.00 38 Piece Wheelchair - Front Wheel Size: 6 Inches Expanded Size: 82 * 58 * 87cmseat Depth: 38cmrear Wheel Size: 16 Inches Back Height: 42cmfolded Size: 70 * 25 * 72cmhandrail Spacing: 55cmseat Width: 45cmnet Weight: 11kgnet Weight Of All Aluminum Alloy Frame: 11kg 10 5,600.00 56,000.00 39 Piece Pediatric Walker- Height-adjustable Frame Sizes. 360-degree Swivel Front Casters For Versatile And Flexible Mobility. Foot-operating Locking Mechanism On Front Casters. Rubber Tire Design 5 13,200.00 66,000.00 40 Set Communication Boards. Measures 9"x7.5". Binder Comes With 5 Different Colorful 10 Mil Poly Dividers, 3 Hard Strips (hook) Attached On Each Side To Hold 30 Cards. Each Card Measures 1.5 X 1.5. Inch Mounted With 1/2-inch Soft Dot (loop), And Round Corner Cut. 10 6,172.00 61,720.00 41 Set Dry Erase Sleeves. Reusable Dry Erase Pockets. Colors: Blue, Pink, Yellow, Red, Green, Purple. Size: 25.5*35.5cm(1pcs). Quantity: 12pcs Package Including: 6 X Dry Erase Pockets 6 Pens 10 796.00 7,960.00 42 Set Wind Up Toys. Category: Clockwork Engineering Road Roller Material: Plastic Size: 9.9*6.5*5.3(cm) Color: Three-color Random Hair Ages: 3+ 10 440.00 4,400.00 43 Set Wordless Picture Books. A Wordless Book About Dealing With Big Emotions Like Fear, Grief, Loss, Sadness, And Anger Hardcover | 36 Pages Product Dimension: Approx. W1cm X L22.2cm X H22.2cm Product Weight: Approx. .28kg 10 1,998.00 19,980.00 44 Piece File Folders. (black Or White) Model: Minimum Of 100 Pages Capacity Size: 310*235mm Suitable For School And Office Supply 10 280.00 2,800.00 45 Set Articulation Cards. Genre: Children's Learning & Education Sub-genre: Society & Culture Label: Scholastic Teaching Resources Language: English Publisher: Scholastic Teaching Resources 10 3,913.00 39,130.00 46 Set Basic Vocabulary Board. Each Unit Comes With: Flashcards Smash Mat Trace And Color Cut And Glue Flipbook Black And White Versions Of All Activities 10 10,150.00 101,500.00 47 Set Phonics Phones. Specifications - Each Pack Includes Two Durable Whisper Phones, One In Vibrant Blue And One In Eye-catching Red. 10 536.00 5,360.00 48 Piece Taekwondo Mats. Thickened 1 Meter X 1 Meter X 2 Cm Interlocking Mats. Color Blue. 30 1,750.00 52,500.00 49 Set Vestibular Balls- (3 Pieces) Material: Synthetic Material Size: 55.0 / 65.0 / 75.0 Cm. Weight: 1100.0 / 1400.0 / 1700.0 G. Color: Violet / Blue / Black 3 6,200.00 18,600.00 50 Unit Monkey Bar With Platform For Swing- Materials: 7/8-inch Plywood 3.5’x2, Washable Mat, 1/2-inch Braided Ropes, Stainless Steel Carabiners Dimensions: 47 X 27.5 Inches; Maximum Rope Length - 7 Feet, Weight Limit: 100 Kilos (free Installation) 1 42,000.00 42,000.00 51 Set Trampoline With Handrails 40-inch Jumping Surface Area, Handrail Adjusts From 28.5"" To 36.5""h 16lbs. Holds Up To 300 Lbs 2 11,580.00 23,160.00 52 Unit Tumble Barrels-inside Diameter: 18"-24”, Outside Diameter: 24", Weight: 250lbs. (free Installation) 1 40,695.00 40,695.00 53 Set Wall Bars- 6-hole Design Pull Up Bar. The Maximum Weight Is 200kg. Solid Steel Bar With Black Powder Coating To Prevent Rust And Corrosion And Prolong Service Life, With Soft Cushions. 2 2,598.00 5,196.00 54 Set Adl Board - 6 Colors, 6 Different Dressing Skills Training. A Quiet Skill Book Made Of Cardboard And Non- Woven Fabric. Suitable For Children 2-7 Years Old. Package Dimensions: 11.73 X 9.76 X 2.28 Inches Item Weight: 1.28 Pounds" 10 494.00 4,940.00 55 Unit Pediatric Walker - 360-degree Swivel Front Casters For Versatile And Flexible Mobility. Total Height: 75-90cm Side Wheel Width: 70cm. Front And Rear Track Width: 75cm. Left And Right Wheel Track: 40cm Suitable Height: 85-120cm. Weight: About 12kg 4 17,998.00 71,992.00 56 Set Assessment Tool Set Of Assessment Tools For Behavioral, Psychological, Intellectual, Motor, Socio- Emotional (1 Copies Per Set) Like: Ravens Progressive Matrices Tests, Goodenough-draw A Person Test 2 48,000.00 96,000.00 57 Set Assessment Tool Set Of Assessment Tools For Behavioral, Psychological, Intellectual, Motor, Socio- Emotional (1 Copies Per Set) Like: Wechsler Intelligence Scales For Children (wisc-v) 2 48,000.00 96,000.00 58 Pcs Reading Stand - High-grade Steel (iron). Color: Black. Dimensions: 26 Cm X 21 Cm X 16 Cm (folded) Adjustability: Multiple Notches For Adjustable Height And Angle. 1 Rotary Page Clip To Hold Pages Securely. 10 1,050.00 10,500.00 59 Unit Braille Translator- Supports Translation Of Print (word, Html, Daisy And Others) To Braille For Over 130 Languages. Drives All Major Braille Embossers. (with 6 Months Warranty) 1 136,800.00 136,800.00 60 Unit Laptop 15.5" – 17" Monitor, Processor: Between 2.0- 2.8ghz 512gb Ssd, 8gb Ram (3 Mos. Warranty) 36 39,000.00 1,404,000.00 61 Cord Hdmi Cord 5 Meters 5 600.00 3,000.00 62 Cord Hdmi Cord 10 Meters 5 900.00 4,500.00 63 Set Connector Cord. Cord With Male Plug To Connect From Cellphone/ Laptop To Sound Systems Microphone Port. 5 500.00 2,500.00 64 Unit Augmentative Communication Systems. Package Dimensions 9.13 X 3.03 X 1.1 Inches Batteries 2 Aaa Batteries Required. (included) Preprogrammed Commands Wide Variety- Travel Bag- Aac Device 10 3,702.00 37,020.00 65 Unit Call Lights. Receiver Working Voltage: 110-260v Transmitter Battery: 12v 23a Alkaline Battery Working Distance: 1000 Feet In Open Area. [packing List]. 3 Receivers 2 Transmitters. 2 X Double-sided Tape. 1 X User Manual. 2 X 12v 23a Batteries. 10 1,536.00 15,360.00 66 Unit External Hard Drive. 1tb External Hard Drive Usb 3.0 5 3,500.00 17,500.00 67 Unit Audio Voice Recorder. Built-in 375mah Battery, Specification: Recording Time: 512kbps， 32gb: About 144 Hours. Storage Media: Tf Card, 32gb, Battery Capacity: 375mah, Package Size: 15.2x7.8x3.7cm/5.9x3x1.4in, Package Weight: 135g – 140g/4.7oz 10 2,674.00 26,740.00 68 Unit Portable Reading Camera -macro Focus Range 10 Cm Shooting Modes Easy, Macro, Automatic Exposure Control Type Automatic Color; White Video Capture Resolution; 1080p, 2448p 5 10,260.00 51,300.00 69 Unit Laser Printer. Computer Printers Using Powder - Based For Swell Paper. 2 20,000.00 40,000.00 70 Unit 3 In Printer - Print, Scan, Copy, Fax With Adf, Flatbed Color Image Scanner, A4, Ltr, 8.5 X 13’, Folio 9 19,080.00 171,720.00 71 Unit Projector -5,000 Ansi Lumens (standard). Wxga 1,280 X 800) Dlp Type Projector. With Built-in Speaker X 16,000 Hours (standard), 10,000 Hours (eco), 15,000 Hours (extreme Eco) Lamp Life Wireless Projection Hdmi Cable, Bag 2 Years Warranty" 1 25,000.00 25,000.00 72 Unit Projection Screen. Specs: 120 Inch Projector Screen With Tripod Stand Home Outdoor Screens Cinema Portable 1 6,490.00 6,490.00 73 Pcs Calculator. Basic Calculator Big Calculator. Office Supplies. Dimension: 160.4x164.5x44.2mm. Color White. Dual Power Supply. Aaa Battery With Solar Panel. Inner Concave Buttons. 5 500.00 2,500.00 74 Unit Touch Screen Tv – Not Less Than 55" Android Tv (free Installation) 1-year Service Warranty 1 61,000.00 61,000.00 75 Pcs Cork Bulletin Board (20x30cm Cork Board With Black Wooden Frame) 1 430.00 430.00 76 Pcs Convertible Drawing And Drafting Table (manual Lift Dimension W-7.75 X D 24x H22" To 31.5") 3 8,400.00 25,200.00 77 Pcs Table. Desk Painting Easel (wooden Easel Stand For Painting 1.75m Complimentary Screws Firm And Strong) 5 454.00 2,270.00 78 Pcs Gauze Bandage (sterile Gauze Bandage 3x10 Per Box) 2 300.00 600.00 79 Pcs Povidine-iodine 120ml (antiseptic Wound Solution) 5 250.00 1,250.00 80 Pcs Artist Taboret (35 ½" H X 17 ½" W X 14 ½" D+9/cm X 44cm X 37 Cm 1 26,784.00 26,784.00 81 Pcs Medicine Cabinet Large. Dimension: 29 X16.5x16 Cm 2 1,500.00 3,000.00 82 Pcs Sewing Machine (zigzagger) Power：90w, Rated Voltage：220v, Number Of Stiches：23, Automatic Winding. Presser Foot Pressure Adjustable (free Installation) 1 25,000.00 25,000.00 83 Pcs Sewing Machine (electric) (portable Sewing Machine With 23 Stitches (free Installation) 2 15,000.00 30,000.00 84 Pcs Tailors’ Scissors (10") Heavy Duty 5 1,500.00 7,500.00 85 Pcs Glue Gun (20w High Temperature) 5 111.00 555.00 86 Pcs Acrylic Color (set 12 Pc X 12 Ml) 5 368.00 1,840.00 87 Pcs Scissors, 5" Blunted Scissors, Plastic Handle. 5 112.00 560.00 88 Pcs Cutters. Snap Off Blade Knife Blade, Refill 9 Mm 5 13.00 65.00 89 Pcs Watercolors (50 Color Solid Watercolors Tin Box (202'82'33mm) 5 441.00 2,205.00 90 Pcs Art Paper (assorted Colors, Short Size) 5 270.00 1,350.00 91 Pcs Paint Brushes (12 Pcs Fine Detail Paint Brush) 5 246.00 1,230.00 92 Pcs Yarn (yarn Hand Knitting And Crochet Single Color (5 Colors) 5 30.00 150.00 93 Pcs Glue (1 Bottle 240g) 5 126.00 630.00 94 Pcs Colored Pencils (colored Pencils 12/set) 5 190.00 950.00 95 Pcs Colored Pens (fine Line Colored Marker 24 Colors In Pvc Bag) 5 90.00 450.00 96 Pcs Sewing Pins (sewing Pins 40 Pcs/set0 5 10.00 50.00 97 Pcs Sewing Needles(hand) (sewing Needles Big And Small) 5 18.00 90.00 98 Pcs Rotary Cutter (45mm) 5 169.00 845.00 99 Pcs Tape Measure (body Tape Measuring Ruler Tailoring) 5 16.00 80.00 100 Pcs Crochet Hooks (100 Pcs Crochet Hook) 5 286.00 1,430.00 101 Pcs Knitting Needles (2 Pcs/set (35cm) Knitting Sweater Stick Needle Bamboo Sweater Needle Knitting Scarf Tool) 5 144.00 720.00 102 Pcs Crochet Thread (thread Yarn 175 M) 5 46.00 230.00 103 Pcs Sewing Thread (polyester 1000 M) 5 42.00 210.00 104 Pcs Painting Easel. Studio/ (90/150 Cm Easel Wooden Standard Painting Display) 5 569.00 2,845.00 105 Pcs Manual Pencil Sharpener (one -hole Sharpener Tub) 5 68.00 340.00 106 Pcs Doll Mannequin. Whole Body With Stand Decor Body Dress Full Body Display 5 411.00 2,055.00 107 Pcs Transparent Edge T- Square (hand Tool Inch Metric Ruler 6") 5 535.00 2,675.00 108 Pcs Wood Carving Set. Carpentry Tools (professional 12/set Manual Wood Carving) 5 1,670.00 8,350.00 109 Pcs Staple Gun. (gun Tacker/ Staple Gun Length-18cm Width -12cm H-3cm, Color- Silver Head T50) 5 226.00 1,130.00 110 Pcs Slope Sink. (single Bowl Stainless Steel Kitchen Sink Box 15" Single Bowl Kitchen Sink Sus 304) 5 21,892.00 109,460.00 111 Pcs Roofing Square. Dual Marking Right Angle Picture Framing Carpenter Ruler (wadlow Stainless Steel Angle Ruler Aluminum Alloy Body Heavy Duty Tool) 5 216.00 1,080.00 112 Pcs Professional Compound Mitre Box & Saw (mitre Box And Box Saw Set 12 Inch) Miter Box Will Handle Stock 7 1/4" High, 8" Wide At 90°, And 5" Wide At 45°. The Saw Can Be Set At Any Angle And Has Automatic Stops For 90°, 45°, And For 5, 6, 8 And 12-sided Frames. 1 1,510.00 1,510.00 113 Pcs Drawing Lamp (metal Adjustable Arm Work Desk Lamp) 5 373.00 1,865.00 114 Pcs Chisel Rack For Wood Carving (professional 12-piece Wood Carving Chisel Set With Black Case Sharp Hand Tools For Beginners) 5 1,299.00 6,495.00 115 Pcs Corner Clamp (90-degree Single Swing Jaw Corer Clamp 68 Mm) 5 258.00 1,290.00 116 Pcs Decorative Realistic Artificial Fruits (realistic Artificial Fruit Such As Apples, Orange, Lemon, Pineapple And Banana) 5 293.00 1,465.00 117 Pcs Geometric Shapes Set (wooden Montessori Learning Geometric Building Blocks) 5 1,176.00 5,880.00 118 Pcs Geometric Designer Templates (multi -functional Geometric Ruler) 5 118.00 590.00 119 Pcs Stack Rack (toy Origami Rack Shelves) 5 1,477.00 7,385.00 120 Pcs Picture Frame And Miter Clamp (90 Degree Right Angle Clip Picture Frame) 5 710.00 3,550.00 121 Pcs Heat Gun (heat Gun With Accessories 2000 W) 5 1,725.00 8,625.00 122 Pcs Tape Dispenser (tape Dispenser 1") 5 114.00 570.00 123 Pcs Multi- Function Three - Hole Puncher (multi-dimensional 3 -hole Puncher) 5 4,176.00 20,880.00 124 Pcs Metric Scale (technical Triangular Scale. Set Of 45, 90 Degrees) 5 68.00 340.00 125 Pcs Steel Tape Measure (tape Measure 8m/20) 5 470.00 2,350.00 126 Pcs Heavy Duty Circular Saw (7-¼" 1600w) 5 4,104.00 20,520.00 127 Pcs Abrasive Disc Cutter Machine (ssc22 14-inch Cut Off Saw Machine 2200w) 5 7,577.00 37,885.00 128 Pcs Manual Canvas Pliers (industry Line Combination Plier Insulated Pliers) 5 416.00 2,080.00 129 Pcs Jet-bow Beam Compass Drawing Set. The Set Includes 6" Speed Compass With Inter-changeable Pen, Pencil, Divider Parts, And Replaceable Needle Points. 4½" Bow Compass With Inter-changeable Pen, Pencil, And Divider Parts. 5 1,169.00 5,845.00 130 Pcs Human Head Model(2 Pack 17" Foam Head Female Wig Head 5 4,791.00 23,955.00 131 Pcs Screw Drivers Set( 9 Pcs Multi-purpose Magnetic Screwdriver Set 5 226.00 1,130.00 132 Pcs Pliers. Pliers And Grip Set (premium 4 Pcs Insulated Pliers Set) 5 2,904.00 14,520.00 133 Pcs Artist Stool With Wheels (stainless Steel Stool Bar) 5 1,991.00 9,955.00 134 Pcs Screen Print Squeegee (curved Aluminum Handle Squeegee 75) 5 308.00 1,540.00 135 Pcs Mixing Paint Palette (paint Mixing Palette 10 Well Plastic) 5 45.00 225.00 136 Pcs Carving Chisels For Wood (wood Chisel 4 Pcs/set) 5 798.00 3,990.00 137 Pcs Files Set For Wood Carving, Craft Metal, And Glass Stone (10-piece Needle File Set For Jewelries) 5 191.00 955.00 138 Pcs Heavy Duty Multi- Purpose Bench Vise (8") Mounted On A Steel Platform. 2 15,000.00 30,000.00 139 Pcs Anvil (15 Kg) With Steel Mounting Platform 2 12,000.00 24,000.00 140 Unit Electric Angle Grinder. Heavy Duty 4" 1000w Professional Power Tools Grinders Variable-speed 3 2,500.00 7,500.00 141 Box Cutting Disc For Steel. Ultra-thin Cutting Disc 4 (25pcs) For Stainless 5 2,000.00 10,000.00 142 Pcs Cutting Discs For Masonry. 4”-inch Professional Diamond Cutting Disc Continuous Eco For Tile / Ceramic 20 300.00 6,000.00 143 Set Drill Bits.3-12mm Multifunctional Triangle Glass Metal Drill Bit Set Diamond Ceramic Tile Concrete Brick Wood Punching Hole Drill Bits 5 500.00 2,500.00 144 Set Drill Bits. 13pc Cobalt High Speed Steel Twist Drill Bit Set 1.5mm-6.5mm For Drilling Metal Wood Stainless Steel 5 500.00 2,500.00 145 Set Drill Bits For Wood. 7pc X Long Wood Drill Bit Set 4mm 5mm 6mm 7mm 8mm 10mm 12mm X 300mm Brad Point Auger Drill Bits Wood 5 500.00 2,500.00 146 Set Electric Wood Power Planer. Wood Planer For Woodworking. 1200 Watts. 1300 Rpm. 50 Hz. 80mm Wide. With Accessories. With Warranty 3 3,000.00 9,000.00 147 Unit Impact Drill 13mm Hammer Electric Drill Heavy Duty 220v Household Power Tools Industrial Screwdriver. 7.5 Amp Copper Motor, 700w, 3300rpm. With Warranty 3 3,000.00 9,000.00 148 Box Welding Rod Special N-6013 (2.5) (3/32 X 13”) 10kg Per Box 4 2,500.00 10,000.00 149 Unit Electric Welding Machine. Portable Igbt Inverter Welding Machine (dc Inverter Welding) With Accessories. With 3 Mos. Warranty 3 5,000.00 15,000.00 150 Pcs Welding Protective Suite (genuine Whole Leader Welding Apron) 5 2,362.00 11,810.00 151 Pcs Welding Hood Cape (standard Size) 5 311.00 1,555.00 152 Pcs Welding Gloves 5 186.00 930.00 153 Pcs Welding Protective Visor Glasses, Standard 5 420.00 2,100.00 154 Pcs Welding Mask (welding Helmet Auto Darkening Adjustable) 5 465.60 2,328.00 155 Pcs Hard Hat (heavy Duty Safety Helmet With Chin Strap) 5 291.00 1,455.00 156 Pcs Compact Electric Kilns (quick Fire A Kiln Controller) 2 39,305.00 78,610.00 157 Pcs Heat Press Transfer Machine (multi-function Heat Press Machine Flatbed: 30 Cm X 38 Cm) 2 11,808.00 23,616.00 158 Pcs Hammer For Carpentry. Claw Hammer /16oz 5 300.00 1,500.00 159 Set Hacksaw Frame With Blade For Metal 12" 300mm Heavy Duty 5 350.00 1,750.00 160 Pcs Wooden Hand Saw. 18" High Quality Metal Blade With Plastic And Rubber Handle 5 350.00 1,750.00 161 Pcs Steel Measuring Tape. Fluorescerous Tape 10m Portable Self Lock Tape Measure Meter Tape Tools 5 350.00 1,750.00 162 Pcs Tri Square. High Quality Metal Frame 12" With Clear Markings 5 750.00 3,750.00 163 Pcs Level Bar. Aluminum Level Bar With Magnet Heavy Duty 80cm 2 2,000.00 4,000.00 164 Pcs Plumb Bob / Hulog. With String 350g 5 250.00 1,250.00 165 Set Rachet. Combination Wrench Steel Chrome Vanadium 8-24mm (per Piece) 5 500.00 2,500.00 166 Set Ratchet Wrench. 12pcs 1/2 1/4-inch Drive Ratchet Wrench Cr-v Socket Kits Mechanic Spanner Car Motorcycle Repair Tool 5 700.00 3,500.00 167 Pcs Adjustable Wrench. Industrial Adjustable Wrench (12") 300mm Made Of High-quality Steel. 5 350.00 1,750.00 168 Set Back Wrench. Set Of Heavy-duty Double Ring Spanner Wrench (metric 28mm - 32mm) Cr-v 5 500.00 2,500.00 169 Set Combination Wrench Tool Set 16pcs (8-32mm Professional Dual Purpose 5 700.00 3,500.00 170 Set Magnetic Screwdriver Set Professional Cushion Grip 5 Flat Head And 4 Phillips Tips Screwdriver Non-slip 5 1,000.00 5,000.00 171 Set Allen Wrench. Short Arm Hex Allen Key Set With Carbon Steel Material. (1.5 To 6 Mm 7 Pcs Set) 5 100.00 500.00 172 Set Heavy Duty Pliers. 8"standard Pliers Cutter Longnose Combinations 8"pliers 5 500.00 2,500.00 173 Pcs Water Pipe Wrench 18” Liyabe Tubo Yabe Hand Tools 5 500.00 2,500.00 174 Set Chisel For Wood. 90 Mm Wooden Handle. 12pcs Professional Manual Wood Carving Hand Chisel Carving Tool Set, 8mm-14 Mm High Quality Steel Blade. 5 900.00 4,500.00 175 Set Wood Planer Set -katam. Locally Manufactured 8 Inches 2 500.00 1,000.00 176 Pcs Rubber Mallet (16 Oz) 5 258.00 1,290.00 177 Pcs Ball Peen Hammer (½ Lb. (80 Oz) 5 376.00 1,880.00 178 Pcs Cutting Mat 6680412 5 268.00 1,340.00 179 Pcs Heavy Duty Extension Wire (10-meter Wire: 162 C, Plug: 15a, 25 V, Maximum Wattage:3750 W., At Least 4 Outlets) 5 900.00 4,500.00 180 Set Microphone With 5-meter Cord, Anti-interference, Anti-whistling. 2 1,500.00 3,000.00 181 Pcs Portable Sound System With Microphone ( Active Portable Trolley Speaker , 600w Max Power, Bluetooth + Tws, Usb & Sd Playback, Fm Radio, Line-in & Line -out, 2 Guitar Input, 2 Wired Mic Input, 180 Channels, Mic Priority, High Quality Lead Acid 12ah Battery, 12 Dc Input, Dimensions: (l) 36.5cm (w) 40 Cm (h) 67.5 Cm, 2 Fee Wireless Mic) 2 20,000.00 40,000.00 182 Pcs Camera Flash. 92 Ft./28 M) 2 13,800.00 27,600.00 183 Pcs Camera Lens (18-200mm F/3.5-5.6 Lens 2 40,336.00 80,672.00 184 Pcs Camera Tripod (aluminum Tripod Digital Camera Tripod Mobile Phone Selfie Stands) 2 2,500.00 5,000.00 185 Pcs Studio Lights (soft Light) 4 10,200.00 40,800.00 186 Hdmi Cord. Hdmi Male To Male Cable Hd104 10110 10 Meter. 4k/60hz 2 1,500.00 3,000.00 187 Hdmi Cord. 5 Meters. Two-color Injection Plug Double Shielded Cable Body. Hdmi2.0 Version. Resolution: 0.75m-3m Support 4k 60hz; 5m Support 4k 30hz Only. Awg:30awg (0.75m-5m) 5 600.00 3,000.00 188 Pcs Soft Box Stand And Reflector Holder (50x70 Cm Soft Box Lighting Kit) 2 442.00 884.00 189 Pcs Monolights (200 W) 2 3,931.00 7,862.00 190 Pcs Reflector With Holder (holder /arm Stand Kit) 2 2,891.00 5,782.00 191 Pcs Boom Light Stand And Reflector Holder (420 Lb. Light Boom Stand With Weight Bag Up To 5kg Maximum Lead Capacity) 3 5,508.00 16,524.00 192 Pcs Background (4.22 M Background Paper 1.36 X 10m) 3 1,438.00 4,314.00 193 Pcs Display Panel Board (display Parallel Board) 1 14,290.00 14,290.00 194 Pcs Offline Mini Compressor (air Compressor Kwv550 9l Oil Less 3 4,558.00 13,674.00 195 Pcs Styrofoam Cutter (electric Foam Cutter Hot Wire Pen Portable) 5 238.00 1,190.00 196 Pcs Potter's Wheel/ Electric Potter's Wheel / Cutter (220 Volts Pottery Wheel) 1 6,228.00 6,228.00 197 Pcs Fire Blanket (with Pvc Pouch 1.2m X 1.2 M) 3 624.00 1,872.00 198 Pcs Smoke Detector X-sense Xs01 Mini Smoke Detector- Stand Alone 3 1,799.00 5,397.00 199 Pcs Disposal Bins (trash Bins 75 L) 3 1,804.00 5,412.00 200 Pcs Dressing Mirror (whole Body Mirror With 4 Wheels Height 5ft. Width 14 Inches) 1 1,500.00 1,500.00 201 Pcs Dish Towels (10 Pc. Per Set 25 Cm X 25 Cm Microfiber Super Absorbent) 10 993.00 9,930.00 202 Pcs Steamer. 3 Layer Steamer 32cm Stainless Steel Cooking Pots Cookware Steam High Quality 3 1,156.00 3,468.00 203 Pcs Soap Dish (dual Soap Case With Cover & Handle- Bathroom Soap Dish / Soap Case) 50 70.00 3,500.00 204 Pcs Detergent (detergent Powder Set 6 Kilos-i Kilo X 6 Pouches) 50 288.00 14,400.00 205 Pcs Hand Soap (liquid Hand Soap Antibac 1 Gallon) 50 216.00 10,800.00 206 Pcs Pots (extra Size #4 (26cm Diameter 16 Cm In Height) 20 673.00 13,460.00 207 Pcs Pans (nonstick) 5 194.00 970.00 208 Pcs Toilet Paper Holder (wall Mounted Bathroom Toilet Paper Holder Tissue) 2 238.00 476.00 209 Pcs Dipper (plastic Dipper L 11" X W 36"x H 41" 2 15.00 30.00 210 Pcs Pail (utility Pail With Metal Handle 10l/26x27 Cm) 2 111.00 222.00 211 Pcs Trash Can (with Plastic Swing Lid L-27 Cm, W- 17.5cm, H- 40.5 Cm) 2 260.00 520.00 212 Pcs Toothbrush (extra Clean Toothbrush 5 Pk -soft) 20 182.00 3,640.00 213 Pcs Hairbrush (natural Wood Hairbrush Comb) 20 120.00 2,400.00 214 Pcs Comb (1 Dozen Suklay 3-hole X Sz-28 Big) 20 90.00 1,800.00 215 Pcs Toothpaste (red 100 Ml) 20 60.00 1,200.00 216 Pcs Plastic Tumbler 20 300.00 6,000.00 217 Pcs Razor (twin Blade Disposable Razors) 20 120.00 2,400.00 218 Pcs Nail Clipper (stainless Nail Clippers H-8 Cm Wt-0.046 Kg) 20 100.00 2,000.00 219 Pcs Nail File (12 Pcs Red Nail File (medium) 20 50.00 1,000.00 220 Pcs Deodorant (roll On 50 Ml Bottle) 20 150.00 3,000.00 221 Pcs Face Towel (basic Face Towel - Free Size) 20 100.00 2,000.00 222 Pcs Feminine Napkin (silk Floss 12 Pcs) 200 50.00 10,000.00 223 Pcs Dust Catcher With Broom (2n1 Broom Dustpan Set Windproof Floor Sweeper With Broom) 5 170.00 850.00 224 Pcs Feather Duster (soft Magic Feather Duster Long Size And Colorful Colors (plastic) 5 150.00 750.00 225 Pcs Wash Rags (round Rags) 5 30.00 150.00 226 Pcs Floor Map (magic Spin Mop With Bucket 360° Rotating Floor Cleaning Plastic Liner) 5 264.00 1,320.00 227 Pcs Garbage Can (super Convenient Mini Flip Lid Trash Can (plastic) 10 150.00 1,500.00 228 Pcs Sponge (high Density Double-sided Dishwashing Sponge 7x10x3 Cm) 10 30.00 300.00 229 Pcs Spray Bottle (garden Sprayer Capacity: 500ml) 10 170.00 1,700.00 230 Pcs Table Napkin (1 Ply 40s Sheets Folded) 10 21.00 210.00 231 Pcs Place Mat (table Placemat Pvc Anti-slip Placemat Washable Durable Kitchen S:30x45cm) 10 25.00 250.00 232 Dozen Plates (12 Pcs Plates 8-inch Melamine White) 6 358.00 2,148.00 233 Set Drinking Glass (drinking Glass 10 Oz Tall Clear Tumblers Set Of 6 L=5.5cm H-12 Cm) 6 510.00 3,060.00 234 Pcs Pitcher (durable Crystal-clear Glass 1.5l) 6 258.00 1,548.00 235 Pcs Bowl (serving Bowls, Clear Glass 20 Cm Diameter) 6 72.00 432.00 236 Pcs Water Dispenser. Hot And Cold Water/drinking Household Multifunctional Top Loading. Stainless Steel Casing Color White. Dimension: 85x29x29 Cm. Large Bottom Locker. 3 3,000.00 9,000.00 237 Pcs Electric Hand Drier (free Installation) 1 5,000.00 5,000.00 238 Pcs Water Pail. (utility Pail With Metal Handle 10l Color: Red/ Blue L-27cm, W-27cm, H-26 Cm 6 335.00 2,010.00 239 Bot Dish Washing Liquid. Kalamansi Lemon Antibac Hygiene 780ml Bottle 10 350.00 3,500.00 240 Pack Laundry Powder Soap. 5 Kg Supra Clean, Natural Scent 10 600.00 6,000.00 241 Pcs Laundry Bar Soap (scrubber Bar 125g) 120 18.00 2,160.00 242 Pcs Clothesline (1 Pc Nonslip Clothesline 35 M) 20 10.80 216.00 243 Pcs Clothes Pin (laundry Clothes Pins Spring Clips 24 Pcs Plastic) 20 48.00 960.00 244 Pcs Wash Basin (laundry Basin 23 Inch) 10 504.00 5,040.00 245 Pcs Laundry Bag Set (4 Pcs/set Laundry Washing Bag- 1 Pc M(30cmx40cm) 1pc L (40cmx50cm) 1pc Xl (50x60 Cm) 10 150.00 1,500.00 246 Pcs Ironing Board (ironing Board With Stand Portable 43"iron Board (70cm To 86 Cm) 5 1,300.00 6,500.00 247 Pcs Flat Iron (non-stick Teflon Saleplate Spray Function Ht & Width 251x170x120mm 5 870.00 4,350.00 248 Pcs Mono Bock Chair, Standard Size. White. Load Capacity 200kg. 20 600.00 12,000.00 249 Pcs Curtain Rod (steel +anti-rust Coating, Adjustable Size: Large 120 Inches) 10 1,200.00 12,000.00 250 Pcs Curtain (1pc 5x7 Ft. Window Curtain With 8-hole Grommet Rings For Bedroom And Living Room) 10 714.00 7,140.00 251 Dozen Hangers (12 Pcs. Plastic Hanger) 2 150.00 300.00 252 Pcs Washing Machine. 7.0 Kg Digital Inverter Fully Automatic Top Load Washing Machine (water Level: 5, Gross Weight: 31kg, Net Weight: 27 Kg Gross Dimension: (wxhxd)=580x890x600mm Net Dimension: (wxhxd)= 540x857x568mm) 2 20,000.00 40,000.00 253 Pcs Vacuum Cleaner (heavy Duty Gas 12-25 Pl Wet And Dry Vacuum Cleaner/ Extractor With Power Socket System 1,250 W Weight-9kg, Max Input Power- 1,250 W, Max Vacuum Power-200 Mbar) 5 11,547.00 57,735.00 254 Pcs Socks (cotton Socks Unisex High Street Socks Sixe:38-44 2 50.00 100.00 255 Pcs Dress (sleeve Ruffle Hem Plain Elegant) 1 500.00 500.00 256 Pcs Slippers (sizes 10, Flipflop Brand Light Weight And Durable 2 132.00 264.00 257 Pcs Mattress (for Single Size Bed Size Polyester 3.5 Inch Thick 6 4,440.00 26,640.00 258 Bed Foam (for Single Bed, 3 Inches Thick) 3 3,500.00 10,500.00 259 Pcs Pillows (foam Pillow 4x12x20) 3 426.00 1,278.00 260 Pcs Bedsheets (cotton Full Garterize 3n1 Bed Sheets, L-60in Ww-75in (for Single Bed Size) 3 300.00 900.00 261 Pcs Alarm Clock (3-inch Retro Mute Quartz Bell Alarm Clock Movement Bedside With Night Light And Loud Alarm) 1 450.00 450.00 262 Pcs Handheld Rechargeable Pool Vacuum. • Strong Built-in 4v 2ah Ni-mh Rechargeable Batteries • Suitable For Use With All Purespas And Above Ground Pools Up To 18 Feet Or 5.49 Meters In Diameter • 0.21 Gal (0.8 Liters) Quick Release Transparent Debris Container • 12 Gal/min. (45 Liters/minute) Water Suction For Efficient Debris Collection • 94 Inches (2.39m) Lightweight Telescoping Aluminum Pole • Two Interchangeable Brush Heads • Automatic Shut-off Feature When Vacuum Is Not Submerged In Water • Ipx8 Waterproof Switch For Added Protection • 5-6 Hour Charge Time / 50 Minutes Maximum Running Time • Usb Charging Cable Included For Convenient Recharging (plug Not Included) 3 9,998.00 29,994.00 263 Pcs Swimming Pool Leaf Skimmer. Purpose: Used For Cleaning Swimming Pool And Salvaging Pool Water Garbage. Material: Pp Plastic. Size: 420*280*30mm/16.54*11.02*1.18". 5 376.00 1,880.00 264 Pcs Pack Of 300 Pcs Chlorine Tablet For Swimming Pool. Adjustable Chlorine Dispenser 8 Inchin Combination With Mont, 3-inch Chlorine Tablets Adjust The Water Flow Rate And Hereby The Amount Of Chlorine Dissolved In Your Pool Package Included:1*chlorine Dispenser +300pcs Pool Cleaning Tablet Or 300pcs Pool Cleaning Tablet 20 500.00 10,000.00 265 Pcs Adaptive Swim Life Jacket For Disabled. Keeps The User’s Face Out Of The Water. Stops The Tension Of The Neck. Upright Position. Back Support. Therapist Hands Free! Double Harness Distributes Tension’s Adjustment. Possibility To Add The Harness Pad (or “cuissard” In French) No Latex. 5 11,000.00 55,000.00 266 Pcs Bakery Display Rack (estante). Made Of Glass And Aluminum Frame. 4 Layer Of Glass (transparent) Or Acrylic With Partition. Rubber Wheels With Lock. At Least 2ftx 5ftx 4 Ft 2 40,000.00 80,000.00 267 Pcs Bread Rack. Made Of 12 Mm Steel. 24"x5ftx5ft. Can Hold Up To 10 Trays (lagayan Ng Plantsa Ng Tinapay) 2 10,000.00 20,000.00 268 Pcs Cookery Cabinets (made With Carbon Steel 5 Layers, Size: H: 144cm, W: 55cm) 3 3,621.00 10,863.00 269 Set Housekeeping Cart. Multi-functional Movable Cleaning Cart Housekeeping Property Cleaning Tool Cart Special Trolley. Standard For Housekeeping Work. 5 5,000.00 25,000.00 270 Set Shopping Cart Utility Cart Trolley Grocery Cart For Warehouse Garden Supermarket 5 6,000.00 30,000.00 271 Pcs Kitchen Carts (2 Layer Stainless Steel Carts With Two Brake Wheels; Size: 400mm X 500mm X 860mm) 2 3,019.00 6,038.00 272 Pcs Weighing Scale Digital. Display Mode: Led/lcd+light. Weighing Range :40kg. Accuracy: 2g. Product Size: 35x33x14cm 3 Lcd Display On The Operator’s Side Of The Scale As Well As 3 Lcd Display On The Customer’s Side. Minimum Capacity Is 2g. Maximum Capacity Is 40kg Power Source: Built In Rechargeable Battery With Usb Cable Battery Powered Or Connect Usb Cable. Battery Powered Or Connect Usb Cable To Use Weight Platform/tray Material Is Stainless Steel. 4 7,000.00 28,000.00 273 Pcs Measuring Cup. Measuring Cup Sizes: 1 Cup (250ml). 1/2 Cup (125ml). 1/4 Cup (60ml); 1/8 Cup (30ml). Materials. Plastic (abs) 6 500.00 3,000.00 274 Pcs Measuring Spoon 1tbsp 15ml 1/2tbsp 7.5ml Ltsp 5ml 1/2tsp 2.5mlmaterial: Stainless Steel+pp Packing: Pp Bag 6 400.00 2,400.00 275 Pcs Measuring Urn - Glass, Capacity: 100 Ml. (with 10 Ml Increments), Metric And English System Of Measurement; With Handle And Spout, Clear, Non- Porous, Tempered Glass 6 450.00 2,700.00 276 Pcs Wire Whisk - Length: 30 Cm (12 ") Material Stainless Steel 6 320.00 1,920.00 277 Pcs Chef's Knife (stainless Steel) 33cm X 4.5cm X 2cm 6 750.00 4,500.00 278 Pcs Boning Knife (stainless Steel) 24.4cm X 1.9cm X 1.7cm 6 492.00 2,952.00 279 Pcs Oysters Knife (stainless Steel) 15.5com X 6.5cm X 3cm 6 187.00 1,122.00 280 Pcs Cleaver Knife (stainless Steel) 7 Inches Or 2.5mm 6 1,074.00 6,444.00 281 Pcs Tenderizer (pin Tenderizer) Stainless Steel Diameter: 5cm, Height: 19cm 6 119.00 714.00 282 Pcs Tenderizer Mallet. (tenderizer) Stainless Steel 12.6 Inches X 11.5x4cm 6 240.00 1,440.00 283 Pcs Skimmer, Fine (stainless Steel) 7.3cm X 5cm X 21.5cm 6 160.00 960.00 284 Pcs Wire Skimmer, Small (stainless Steel) Handle: 14; Radius: 14 6 105.00 630.00 285 Pcs Skimmers, Spider (stainless Steel) Handle: 14; Radius: 20 6 115.00 690.00 286 Pcs Strainer, Small, Fine (stainless Steel) Diameter:14cm; Length: 29cm; Depth: 5.5cm 6 160.00 960.00 287 Pcs Colander Strainer (stainless Steel) 48cm X 20cm X 12cm 6 298.00 1,788.00 288 Pcs Siever, Small (stainless Steel) 14 Cm 6 188.00 1,128.00 289 Pcs Strainer, Medium, Fine (stainless Steel) Diameter:16cm; Length: 30.5cm; Depth: 5.9cm 6 180.00 1,080.00 290 Pcs Turner (stainless) Dimension: 34.5 X 9.8 X 4.4 Cm 6 280.00 1,680.00 291 Pcs Spatula (silicon) 27.2 X 5.5 X 1.5cm 6 169.00 1,014.00 292 Pcs Wooden Spoon (made With Beech Wood 10cm X 34cm X 2cm) 6 244.00 1,464.00 293 Pcs Parisienne Scoop (stainless Steel Blade With Plastic Handle) Scoop Diameter: 30mm And 27mm; Total Length: 170mm 6 216.00 1,296.00 294 Pcs Fruit Juicer, Standard Type 6 1,500.00 9,000.00 295 Pcs Zester (stainless Steel) Length: 30cm/11.81 Inches 8 268.00 2,144.00 296 Pcs Piping Bag (disposable Bag Size: 24.5cm X 17cm 8 208.00 1,664.00 297 Pcs Pastry Tubes (stainless Steel) 3cm X 3cm X 6.1cm 8 142.00 1,136.00 298 Pcs Strainer, Chinois, Small (stainless Steel) 16cm Handle: 5.5inches 8 198.00 1,584.00 299 Pcs Filling Funnel (stainless Steel) Upper Diameter: 10.5cm, Lower Diameter: 3.7cm, Height: 4.5cm 4 212.00 848.00 300 Pcs Measuring Spoon (1set: 1tbsp, 1/2tbsp, 1tsp, 1/2tsp, 1/3tsp, 1/4tsp) 6 245.00 1,470.00 301 Pcs Tongs (stainless Steel) 9 Inches 10 110.00 1,100.00 302 Pcs Tongs (stainless Steel) 12 Inches 8 179.00 1,432.00 303 Pcs Ice Cream Scoop (stainless Steel) Diameter: 4.5cm, Length: 18cm 6 208.00 1,248.00 304 Pcs Cheese Cloth (made From Cotton) 101 X 270cm 10 223.00 2,230.00 305 Pcs Serving Spoon (heavy-duty Stainless Steel) Length: 22.5cm; Width: 6cm 24 102.00 2,448.00 306 Pcs Pepper And Salt Grinder (made With Stainless Steel, Glass And Ceramic) Approx. 19x6.5cm 6 296.00 1,776.00 307 Pcs Core Seed Remover (stainless Steel; Approx: 1.4x21.5cm) 8 229.00 1,832.00 308 Pcs Wire Whisk, Small (stainless Steel+plastic Handle; 8 Inches) 8 180.00 1,440.00 309 Pcs Wire Whisk, Medium (stainless Steel+plastic Handle; 10.2 Inches) 8 189.00 1,512.00 310 Pcs Wire Whisk, Heavy Duty (stainless Steel+plastic Handle; 14 Inches) 2 258.00 516.00 311 Pcs Can Opener (stainless Steel Blade; Length: 17cm High) 1 370.00 370.00 312 Pcs Muti-purpose Kitchen Scissors/ Shears (scissors Length: 21.5cm; Blade Length: 10cm; Handle Length: 11.5cm; Handle Width: 9.5cm; Blade Thickness: 0.4cm Weight: 200grams) 8 368.00 2,944.00 313 Pcs Soup Ladle, 4 Oz (stainless Steel; Size: 7.5cm X 30 Cm) 8 124.00 992.00 314 Pcs Soup Ladle, 6 Oz (stainless Steel; Size: 7.5cm X 30 Cm) 8 194.00 1,552.00 315 Pcs Soup Ladle, 8 Oz (stainless Steel And Wooden Handle: 10 X 51 Cm) 3 290.00 870.00 316 Pcs Soup Ladle, 12 Oz (stainless Steel And Wooden Handle: 15 X 51 Cm) 2 360.00 720.00 317 Pcs Kitchen Spoon (stainless Steel; Size: 8cmx6.5cmx21cm) 8 86.00 688.00 318 Pcs Kitchen Spoon, Slotted (material: Plastic; Size: 7x3x43cm) 8 289.00 2,312.00 319 Pcs Kitchen Fork (stainless Steel; Size: 7cmx4cmx21cm) 4 72.00 288.00 320 Pcs Carving Fork (stainless Steel; Size: 13 Inches Long) 3 162.00 486.00 321 Pcs Digital Kitchen Thermometer (cooking/food Temperature; Size 34mm X 270mm) 2 486.00 972.00 322 Pcs Muti-function Vegetable Fruit Peeler Slicer Cutter Chopper (material: Abs + Stainless Steel) 2 429.00 858.00 323 Pcs Stock Pot, Big (with Glass Cover; Size: 34.5 X 27.9 Cm X 16.6 Cm) 2 798.00 1,596.00 324 Pcs Frying Pan, Small (scratch Resistant And Non-stick; Size: 20cm) 4 233.00 932.00 325 Pcs Frying Pan, Medium (scratch Resistant And Non-stick; Size: 24cm) 4 380.00 1,520.00 326 Pcs Frying Pan, Large (scratch Resistant And Non-stick; Size: 28cm) 2 578.00 1,156.00 327 Pcs Colander, Small (stainless Steel; Size: 24cm X 22cm) 3 204.00 612.00 328 Pcs Colander, Medium (stainless Steel; Size: 28cm X 22cm) 2 298.00 596.00 329 Pcs Cutting Board (material: Bamboo; Size: 34x24x1.8cm/750g) 4 209.00 836.00 330 Pcs Heavy Duty Electric Grill Machine 2 10,000.00 20,000.00 331 Pcs Portable And Foldable Charcoal Barbeque Grill 25"x30"x27" 2 2,000.00 4,000.00 332 Unit Cotton Candy Machine, Power 950 Watts, Speed 3600 Rpm, Pre Heating Time 1 To 3 Minutes, 515 Mm Diameter Stainless Drum. 1 5,000.00 5,000.00 333 Pcs Fish Poacher, Medium (stainless Steel With Tempered Glass Cover; Size: 24cm X 38.7cm X 10cm) 1 983.00 983.00 334 Pcs Casserole, Small (stainless Steel: 2.1 Liter; Size: 12cm X 15cm) 6 599.00 3,594.00 335 Pcs Casserole, Medium (stainless Steel: 3.9 Liter; Size: 12.5cm X 20cm) 4 689.00 2,756.00 336 Pcs Wok, Small (nonstick Carbon Steel; Size: 32cm) 4 389.00 1,556.00 337 Pcs Wok, Medium (nonstick Carbon Steel; Size: 36cm) 1 401.00 401.00 338 Pcs Double Boiler, Medium (stainless Steel; Size: 27x14x6cm) 1 389.00 389.00 339 Pcs Paella (heavy Duty Carbon Steel; Size 25cm) 8 581.00 4,648.00 340 Pcs Glass Rack (plastic-coated Metal; Capacity: 24pcs Glass; Dimension: L:52cm; W: 36cm; H:8cm) 2 461.00 922.00 341 Pcs Soup Cup Rack (2 Layered Rack; Size: 35 X 25 X 28cm) 3 899.00 2,697.00 342 Pcs Plate Rack (stainless Steel; Size: 30cmx22.8cmx12.9cm) 2 492.00 984.00 343 Pcs Baking Tray, Small (stainless Steel; Size Details: 23cm X 17cm) 8 258.00 2,064.00 344 Pcs Utility Tray (stainless Steel: Stain Resistant; Size: 45cm X 35cm X 4.8cm) 12 189.00 2,268.00 345 Pcs Roasting Pan (stainless Steel; Size: 31.5 X 24.5 X 2.5 Cm) 4 378.00 1,512.00 346 Pcs Dish Towels (highly Absorbent Cloth With 3pcs Per Pack) 8 98.00 784.00 347 Pcs Cooler, 2.5ft X 2.5 Ft X 3ft Plastic, With Good Insulation 1 3,000.00 3,000.00 348 Pcs Plastic Silverware Or Real Silverware (stainless Steel; 18pcs Utensils Set Includes: 6 Dinner Fork, 6 Dinner Spoons And 6 Dinner Teaspoons) 2 415.00 830.00 349 Pcs Glasses. Dining Glasses (6pcs. Thick Clear Glass: W: 3inches And H: 4inches) 6 265.00 1,590.00 350 Pcs Teacups (ceramic White; Capacity: 250ml) 2 188.00 376.00 351 Pcs Small Plate / Saucers (ceramic With Size: 6 Inches And 6pcs Per Set) 6 140.00 840.00 352 Pcs Cabinet Dish Organizer (2 Layered Metal Dish; Size:41.5cm X 30cm X 47cm) 1 2,499.00 2,499.00 353 Pcs Sponge And Soap Holder For Kitchen (stainless Steel) 18x 10 X 9cm 3 418.00 1,254.00 354 Pcs 11-piece Pots/pans (stainless Steel) 1 5,158.00 5,158.00 355 Pcs Silicone Kitchenware Set. Composed Of Slotted Spoon 12". Soup Ladle 12". Solid Turner 12". Tongs 10". Whisk 9.5". Basting Brush 10.8". Pasta Server 12.5". Round Spatula 12". Spoon 12.5" Spatula 12.6" And Utensils Holder. 6 647.50 3,885.00 356 Pcs Rotary Eggbeater (stainless Steel) 31cm /12.2", W:9.5cm/3.74" 2 340.00 680.00 357 Pcs Dough Scraper (stainless Steel) 16x12x2cm 3 178.00 534.00 358 Pcs Gas Range And Oven (1 Turbo, 1 Large And 2 Medium Burners) 33x42x39.5, (49 Liters ) 1 46,162.00 46,162.00 359 Pcs Refrigerator (7 Cubic Feet, Stainless Look) Two Door Direct Cool 1 15,717.00 15,717.00 360 Pcs Kitchen Cupboards (7 Doors, 3 Drawers) 120x 40x90 Cm 2 13,198.00 26,396.00 361 Pcs Cooking Brush (silicone) Heat Resistant 3 82.00 246.00 362 Pcs Blender. (9 In1 Food Processor, Good For Chopping, Slicing,grating,shredding, Whisking)18x18x38cm 3 3,742.00 11,226.00 363 Pcs Mechanical Microwave Oven (countertop,20 Liters) 700w - 1200w 3 5,075.00 15,225.00 364 Pcs Kitchen Scale Food (manual) 5 Kilogram 2 252.00 504.00 365 Pcs Measuring Spoons (stainless Steel, 6pcs Heavy Duty) 3 258.00 774.00 366 Pcs Measuring Cups (12 Pieces, Bpa -free Plastic Long Lasting Used) Large And Medium Cups 3 2,208.00 6,624.00 367 Pcs Kitchen Shears (stainless Steel) 9 Inches/ 225mm 3 357.00 1,071.00 368 Pcs Potato Masher With Soft Grip Handle (stainless Steel) 9.5x27x8cm 3 357.00 1,071.00 369 Pcs Medium Graters (stainless Steel) 18/8 3 430.00 1,290.00 370 Pcs Funnel (stainless Steel) 22x14.5cm 3 715.00 2,145.00 371 Pcs Can Opener (automatic) 16.3x 1.5cm 3 698.00 2,094.00 372 Pcs Cast Iron Pots And Pans (ceramic, Non-stick) 21.85x 13.19x12.80inch 3 7,180.00 21,540.00 373 Pcs Gas Stove. 2 Burner Built In Gas Stove ( Stainless Steel) 73x41x9cm With Hose And Safety Regulator. 5 3,640.00 18,200.00 374 Pcs Lpg Tank 11kg 6 5,000.00 30,000.00 375 Unit Electric Stove. Stainless Frame. Multifunctional Induction Cooker Inverter Electric Stove Heavy Duty Energy-saving 3500w 220v. All Copper Heating Coil. Five Speed Power Adjustment. Explosion Proof. With Digital Display Panel. 5 2,500.00 12,500.00 376 Pcs Double Broiler Steamer (stainless Steel) 30 Cm Diameter 3 2,730.00 8,190.00 377 Pcs Kitchen Knife Set (stainless Steel And Poly Propylene Plastic Handle) 15x7.5x34cm 3 840.00 2,520.00 378 Pcs Meat Slicer (electric Machine Stainless Steel) 418x 293x 325mm 3 2,494.00 7,482.00 379 Pcs Bread Toaster (stainless Steel Top Plate) 25x 14.6x16.8cm 3 1,059.00 3,177.00 380 Pcs Cookie Press (stainless Steel With 13 Disc And 8 Icing Tips 25x 14.5cm 3 462.00 1,386.00 381 Pcs Cake Decorating Kit. Piping Tips Set ( Stainless Steel, Multicolor) 3 279.00 837.00 382 Pcs Serving Bread Tray (stainless Steel) 45cmx2.8cm 6 1,229.00 7,374.00 383 Pcs Hot Plate Single Electric Stove (1000 W) 8.8x8.8x1.4 Inch 2 583.00 1,166.00 384 Pcs Electric Oven. Height (cm): 32.5. Highlights. Width (cm): 37.5. Warranty: 1 Year Warranty On Electrical Parts And Lifetime Free Service. Net Weight (kg): 7.3. Capacity: 2.8 Liters Length (cm): 49. Gross Weight (kg): 8.2. 5 11,000.00 55,000.00 385 Pcs Oven. Four Plates Oven For Bread (stainless Steel) 530x595x570mm. Lpg Type 1 48,924.00 48,924.00 386 Pcs Bread Plates (stainless Steel) 40x 60cm 20 1,027.00 20,540.00 387 Pcs Bread Rack (stainless Steel)15 Layers 40x60cm Heavy Duty 1 20,000.00 20,000.00 388 Pcs Electric Burger Griddle. Large Size Heavy Duty. Size: 73cmx52cmx10cm. Bigger Waster Oil Container. Stainless Steel, Solid Gritty. Food Grade Material. 2 11,475.00 22,950.00 389 Pcs Food Warmer Display Cabinet. Commercial Food Heater Glass Display Cabinet Heavy-duty Curved Deli Cabinet With Lighting. Constant Temperature Heating Display Counter Ideal For Fried Chicken Burger And Cooked Food. Size: Red+3 Compartments: 96x45x60cm. Rated Power: 300w. Rated Voltage: 220v.number Of Internal Layers: Three. Layers. Temperature Range: 30-80°c. Product Weight: 18kg. Built-in Energy-saving Warm Color Lamp, Improve The Display Effect 2 9,125.00 18,250.00 390 Pcs Frying Pan (non-stick, 28 Cm) 3 1,690.00 5,070.00 391 Pcs Measuring Spoon. 1tbsp 15ml. 1/2tbsp 7.5ml. Ltsp 5ml. 1/2tsp 2.5mlmaterial: Stainless Steel+pp. Packing: Pp Bag. 3 400.00 1,200.00 392 Pcs Measuring Cups (12 Pieces, Bpa -free Plastic Long Lasting Used) Large And Medium Cups 3 2,209.00 6,627.00 393 Pcs Measuring Urn. Glass, Capacity: 100 Ml. (with 10 Ml Increments), Metric And English System Of Measurement; With Handle And Spout, Clear, Non- Porous, Tempered Glass 3 450.00 1,350.00 394 Pcs Mixing Bowl: 30 Cm L30xw27.5xh11.4 Cm Thickness: 0.04 Cm. Material: Stainless Steel 12 900.00 10,800.00 395 Pcs Baking Sheet 11x15 Inches 011 Thickness Heavy Duty Aluminum 10 360.00 3,600.00 396 Pcs Wire Whisk Length: 30 Cm (12 ") Material Stainless Steel 5 320.00 1,600.00 397 Pcs Muffin Pan Non-stick Muffin Pan Dimension: 26.5x35x3cm Capacity: 12 Cup Color: Black Non-stick Surface For Easy Release And Quick Cleanup Dishwasher Safe Ideal For Baking Muffins, Cupcakes, And More Nonstick Coating Helps Ensure Effortless Food Release 5 700.00 3,500.00 398 Set Measuring Spoon 1tbsp 15ml 1/2tbsp 7.5ml Ltsp 5ml 1/2tsp 2.5mlmaterial: Stainless Steel+pp Packing: Pp Bag 6 400.00 2,400.00 399 Set Measuring Cups (12 Pieces, Bpa -free Plastic Long Lasting Used) Large And Medium Cups 6 2,209.00 13,254.00 400 Pcs Measuring Urn Glass, Capacity: 100 Ml. (with 10 Ml Increments), Metric And English System Of Measurement; With Handle And Spout, Clear, Non- Porous, Tempered Glass 6 490.00 2,940.00 401 Pcs Mixing Bowl 30 Cm L30xw27.5xh11.4 Cm Thickness: 0.04 Cm Material Stainless Steel 6 900.00 5,400.00 402 Pcs Baking Sheet 11x15 Inches 011 Thickness Heavy Duty Aluminum 10 360.00 3,600.00 403 Pcs Wire Whisk Length: 30 Cm (12 ") Material Stainless Steel 5 320.00 1,600.00 404 Pcs Electric Stove, 1000 Watts, 12" Diameter, Stainless Steel. With Safety Regulator And Power Indicator. 6 1,500.00 9,000.00 405 Pcs Weighing Scale, Digital "display Mode: Led/lcd+light Weighing Range :40kg Accuracy: 2g Product Size : 35x33x14cm 3 Lcd Display On The Operator’s Side Of The Scale As Well As 3 Lcd Display On The Customer’s Side Minimum Capacity Is 2g. Maximum Capacity Is 40kg Power Source: Built In Rechargeable Battery With Usb Cable Battery Powered Or Connect Usb Cable. Battery Powered Or Connect Usb Cable To Use Weight Platform/tray Material Is Stainless Steel." 4 7,500.00 30,000.00 406 Pcs Scraper(rubber) 30cm X11cmx6.8cm 5 130.00 650.00 407 Pcs Hand Mixer (stainless Steel Bowl) 270x165x290mm, 2.8 Liters Capacity 5 1,755.00 8,775.00 408 Pcs Revolving Cake Stand (aluminum) 12 Inches 5 850.00 4,250.00 409 Pcs Electric Stand Mixer 5.5 Liter(1.9kg) With Bowl And 3 Whisk 6 Speed Setting Dough, Rotating Bowl, Speed Control 3 11,500.00 34,500.00 410 Pcs Rolling Pin Stainless Steel Pressing Stick Pizza Dough Non-stick Dough Roller, (29.5 Cm) 6 300.00 1,800.00 411 Pcs Dough Roller Pin, Wooden. 29.5cm Non-stick Silicone Rolling Pin Pastry Baking Decorating Tool 6 300.00 1,800.00 412 Set Deep Fryer Dimensions (w X H X D) 477 X 318 X 235 Weight 3.81kg Body Material Stainless Steel Color Silver Technical Details Power Consumption 2000w Volume 4l Features Temperature Control Yes 6 7,200.00 43,200.00 413 Pcs Ice Crusher Machine. Electric Stainless Steel Heavy Duty Portable Automatic Rotated Speed: 1500rpm Power:250 Size: 275x190x210mm Capacity: 2 Liter 2 3,900.00 7,800.00 414 Pcs Chest Freezer (inverter) Dual Function Technology (freeze Or Chiller) Solid Top With Glass Cover Inside Digital Temperature Control W/ Lcd Display Dimension: 85:112:70cm 1 28,535.00 28,535.00 415 Set Electric Takoyaki Machine And Double Pan 56 Holes Stainless Steel Size: 437x 435x180mm 6 2,600.00 15,600.00 416 Pcs Waffle Iron Pan 4 Interchangeable Plates 750 Watts 6 1,800.00 10,800.00 417 Pcs Revolving Cake Stand. Nonslip Top And Base. Diameter: 23.5 Cm. Height 14cm. Material: Food Grade Pp. 6 1,076.00 6,456.00 418 Pcs Stainless 4-gas Burner, 55l Gas Oven Hybrid Electric And Lpg 1 40,000.00 40,000.00 419 Pcs Electric Kettle 1.5l 3 900.00 2,700.00 420 Pcs Stand-up Kitchen Mixer-standard (4 Liters Stainless Steel Bowl With Cover) Tilting Mixing Arm. Accessories: Beater, Dough Hook, Whisk. 12 Speed Setting. 2 10,000.00 20,000.00 421 Pcs Hand Mixer. Powerful 180w Motor And 7 Speeds Including Turbo Setting Made Of Stainless-steel Abs. Multifunctional With Chrome Accessories: X2 Beaters, X2 Dough Hooks 5 2,500.00 12,500.00 422 Unit Rice Cooker Standard 2l Home Multifunctional Home Cooking 220v. Fast Cooking, Keep Warm Function, Non-stick Coating, Stainless Steel Cover. Input Voltage. 220v. Power Consumption 400w. Volume Capacity 2l Dimension (l X W X H) 215*215*215 3 2,500.00 7,500.00 423 Unit Electric Rice Cooker 10l 2 5,000.00 10,000.00 424 Pcs Blender 1.5 Liter 5 700.00 3,500.00 425 Pcs Pressure Cooker 3.5 Liter 2 1,200.00 2,400.00 426 Pcs Gas Stove Rack. Plain Sheet With Steel Frame. With Cooking Platform At The Top. Kitchen Heavy Duty Gas Tank Holder Kitchen Organizer Stainless. Made Of Carbon Steel 45cmx45cmx90cm. Made Of Carbon Steel Color Black With Partition For 11kg Gasul Tank And For Cooking Materials. 4 5,500.00 22,000.00 427 Pcs Chef's Knife, 8" Stainless Steel 6 350.00 2,100.00 428 Pcs Bread Knife, 8" Stainless Steel 6 350.00 2,100.00 429 Pcs Clever Knife/ Butcher Knife To Chop Bones 20 Cm Blade, 31 Cm From Tip To Handle 6 350.00 2,100.00 430 Pcs Kitchen Scissors 9" Stainless Steel 6 350.00 2,100.00 431 Pcs Utility Knife 61mmx19mm 6 350.00 2,100.00 432 Pcs Boning Knife, 8" Japanese High Carbon Steel 6 350.00 2,100.00 433 Pcs Paring Knife 4" German Stainless Steel 6 350.00 2,100.00 434 Pcs Stainless Peeler For Vegetables 15cmx6cm 6 80.00 480.00 435 Pcs White Cutting Board (for Bread And Pastry) 25.5cmx34cm, Plastic 6 460.00 2,760.00 436 Pcs Green Cutting Board (for Fruits And Vege)25.5cmx34cm, Plastic 6 460.00 2,760.00 437 Pcs Red Cutting Board (raw Meat)25.5cmx34cm, Plastic 6 460.00 2,760.00 438 Pcs Blue Cutting Board (raw Fish)25.5cmx34cm, Plastic 6 460.00 2,760.00 439 Pcs Yellow Cutting Board (cooked Meat) 25.5cmx34cm, Plastic 6 460.00 2,760.00 440 Pcs Brown Cutting Board (raw Crops) 25.5cmx34cm, Plastic 6 460.00 2,760.00 441 Pcs Weighing Scale (dial/analog. 25kg) 1 400.00 400.00 442 Pcs Digital Kitchen Scale 3kg/0.1g And 500g/0.1g 3 690.00 2,070.00 443 Pcs Measuring Cups (1 Set) 6 95.00 570.00 444 Pcs Plastic Measuring Pitcher Jug With Measurement(set) Maximum Of 1 Liter 6 126.00 756.00 445 Pcs Measuring Spoon, Plastic (set) 6 60.00 360.00 446 Pcs Deep Fry Thermometer, Deed Fried Pot Thermometer Oil Temperature Gauge 6 320.00 1,920.00 447 Pcs Meat Thermometer, Brifit Waterproof Kitchen Meat Thermometer, Foldable Digital Instant Read Food Thermometer 6 400.00 2,400.00 448 Pcs Oven Thermometer 6 389.00 2,334.00 449 Pcs Tenderizer, Wooden Circular-50mm Diameter, 3cm Spikes, 190mm Long (flashlight Design) 6 280.00 1,680.00 450 Pcs Skimmer, Fine Mesh Strainer Oil-frying Filter 7cm Diameter, 32 Long 5 80.00 400.00 451 Pcs Wire Skimmer 18cm Diameter, Stainless Steel 5 80.00 400.00 452 Pcs Strainer, Stainless Steel Multi-purpose Food Strainer, Fine Mesh Long Handle 20cm Diameter X 28cm (fine) 5 109.00 545.00 453 Pcs Siever 17.5x12x11.5cm, Stainless Steel Mesh Stainer 6 68.00 408.00 454 Pcs Strainer Medium 20cm Diameter X 28cm (fine) 6 90.00 540.00 455 Pcs Strainer Large 25cm Diameter X 30cm Long, Stainless Steel 6 120.00 720.00 456 Pcs Wooden Turner, Wooden Sandok Kitchen Spatula Spoon Turner Cooking, 3" Width Of Sandok, 10" Long 6 65.00 390.00 457 Pcs Wooden Spatula 9cm Sandok, 34 Cm Long 6 65.00 390.00 458 Pcs Parisienne Spoon, Double-ended Headed Fruit Ice-cream Ball 6 50.00 300.00 459 Pcs Wooden Ladle/spoon 6cm Pang Sandok 30 Cm Long 6 120.00 720.00 460 Pcs Zester, Four-sided Stainless-steel Grater 9-inch Kitchen Multipurpose Grater For Parmesan Cheese, Ginger Vegetables 6 79.00 474.00 461 Pcs Reusable Piping Bags. 26 Pcs/set Silicone Pastry Bag Tips Kitchen Diy Icing Piping Cream 24 73.00 1,752.00 462 Pcs Stainless Funnel Small 4.5cm Opening Diameter, 3.7cm Height, 0.6cm Tube Diameter 6 60.00 360.00 463 Pcs Stainless Funnel Small 5.5cm Opening Diameter, 5cm Height, 0.9cm Tube Diameter 6 70.00 420.00 464 Pcs Stainless Funnel Small 7.5cm Opening Diameter, 6.7cm Height, 1.2cm Tube Diameter 6 60.00 360.00 465 Pcs 8" Tongs 6 89.00 534.00 466 Pcs 12" Tongs 6 120.00 720.00 467 Pcs Pepper Mill, 5-inch Wooden Peeper Grinder 6 60.00 360.00 468 Pcs Salt Mill 5-inch Wooden Salt Grinder 6 60.00 360.00 469 Pcs Wire Whisks 12 Inches 6 80.00 480.00 470 Pcs Wire Whisks 8 Inches 6 89.00 534.00 471 Pcs Can Opener 6 120.00 720.00 472 Pcs Bottle Opener 6 79.00 474.00 473 Pcs Soup Ladle 3oz 6 140.00 840.00 474 Pcs Soup Ladle 6oz 6 160.00 960.00 475 Pcs Soup Ladle 8oz 6 160.00 960.00 476 Pcs Soup Ladle 12oz 6 180.00 1,080.00 477 Pcs Stock Pot, 30cm High Quality Stainless Steel 10 1,500.00 15,000.00 478 Pcs Stock Pot 24cm High Quality Stainless Steel 10 999.00 9,990.00 479 Pcs Frying Pan 22cm Marble Frypan 10 500.00 5,000.00 480 Pcs Frying Pan 28cm Marble Frypan 48.2x28x5.7cm 10 600.00 6,000.00 481 Pcs Casserole 18 Cm Aluminum, Double Handle, Rust Free 10 250.00 2,500.00 482 Pcs Casserole 20 Cm Aluminum, Double Handle, Rust Free 10 300.00 3,000.00 483 Pcs Casserole 28 Cm Aluminum, Double Handle, Rust Free 10 600.00 6,000.00 484 Pcs Wok 40 Cm Chinese Nonstick Wok Pan 10 500.00 5,000.00 485 Pcs Double Broiler 28 Cm Stainless Steel Two-layer Double Soup Steamed Dual Purpose 10 280.00 2,800.00 486 Pcs Glass Rack. 25-compartment Gray Full-size Glass Rack With 2 Blue Extenders 2 2,500.00 5,000.00 487 Pcs Plate Rack. Microwire 24 Compartment Catering Plate Rack For Plates Up To 11" - Wash, Store, Transport 3 3,000.00 9,000.00 488 Pcs Baking Tray 15"x17" 5 180.00 900.00 489 Pcs Roasting Tray 15"x17'' 5 180.00 900.00 490 Pcs Braising Pan 32cm Stainless Steel Nonstick Pan 5 350.00 1,750.00 491 Pcs Hanging Cabinet With Glass, Std. 2.5'x 3' X 5ft (free Installation) 3 10,000.00 30,000.00 492 Pcs Floor Mops (broom Type) Using Cotton Absorbent Strips 10 180.00 1,800.00 493 Pcs Broom (walis Tambo) 10 80.00 800.00 494 Pcs Dustpan (plastic) 11"x10" Pan, 24" Handle 10 120.00 1,200.00 495 Pcs Garbage Bin (4 Gals.) 10 300.00 3,000.00 496 Pcs Paper Towel Dispenser 10 200.00 2,000.00 497 Pcs First Aid Cabinet, Plastic Box 30cmx12cmx30co With Transparent Cover (free Installation) 2 1,500.00 3,000.00 498 Pcs Fire Extinguisher 3lbs Abc Dry Chemical Refillable (free Installation) 4 2,000.00 8,000.00 499 Pcs Mixing Bowl Small, Stainless Steel Mixing Bowl 20cm 12 80.00 960.00 500 Pcs Mixing Bowl Medium, Stainless Steel Mixing Bowl 30cm 12 130.00 1,560.00 501 Pcs Stainless Steel Basin, 45 Cm Diameter 5 180.00 900.00 502 Pcs Stainless Steel Basin, 38 Cm Diameter 5 120.00 600.00 503 Pcs Baking/ Pastry Brush, Heat Resistant, Standard Size 10 35.00 350.00 504 Pcs Plastic Containers, Microwavable Round Canister, Food Storage Container (400 Ml) 40 20.00 800.00 505 Pcs Multipurpose Plastic Pail 2.5 Gallons Capacity 4 120.00 480.00 506 Pcs Food Grade Silicone High Temperature Resistant Baking Mat Oven Baking (to Match Baking Pan), Browns Silicone Baking Oven Mat Liner, Non-stick For Pastry Cookies Dough 12 90.00 1,080.00 507 Pcs Non-slip Doormat 75x45 Cm Rubber 18 500.00 9,000.00 508 Pcs White Hand Towels Hanging Kitchen Hand Dry 20cmx30cm 12 30.00 360.00 509 Pcs Potholder, Basahan Bilog 6 Inches Diameter 12 15.00 180.00 510 Pcs Round Cake Molder 4, 6, 8 Inches Set 5 161.00 805.00 511 Pcs Square Cake Molder 9, 11, 13 Inches Set 5 160.00 800.00 512 Pcs Baguette Bake Mold Pan 34.5 Cmx 24cm (6cm Molder) Nonstick 10 399.00 3,990.00 513 Pcs Meat Processing Machine (meat Grinder Manual) 1 5,000.00 5,000.00 514 Set Stainless Icing Tip (set-12pcs) Cake Decorating Kit Stainless. Icing Piping Nozzles Pastry Tips Cake. 10 499.00 4,990.00 515 Pcs Cupcake Molder Tray Of 6 12 Holes Baking Pan Muffin Cup Cake 10 89.00 890.00 516 Pcs Large Wooden Turner For Large Oven. Kitchen Turner Flat Spatula Scraper, Acacia Wood 10.5 Inches Long And 2.75 Inches Turner 3 200.00 600.00 517 Pcs Dressing Mirror (whole Body Mirror With 4 Wheels Height 5ft. Width 14 Inches) 1 1,500.00 1,500.00 518 Set Dish Towels (10 Pc. Per Set 25 Cm X 25 Cm Microfiber Super Absorbent) 5 993.00 4,965.00 519 Pcs Soap Dish (dual Soap Case With Cover & Handle- Bathroom Soap Dish / Soap Case) 50 70.00 3,500.00 520 Pcs Detergent (detergent Powder Set 6 Kilos-i Kilo X 6 Pouches) 50 288.00 14,400.00 521 Pcs Hand Soap (liquid Hand Soap Antibac 1 Gallon) 10 216.00 2,160.00 522 Pcs Pots (extra Size #4 (26cm Diameter 16 Cm In Height) 20 673.20 13,464.00 523 Pcs Pans (nonstick 12") 5 195.00 975.00 524 Pcs Toilet Paper Holder (wall Mounted Bathroom Toilet Paper Holder Tissue) 2 238.00 476.00 525 Pcs Dipper (plastic Dipper L 11" X W 36"x H 41" 5 100.00 500.00 526 Pcs Pail (utility Pail With Metal Handle 10l/26x27 Cm) 8 250.00 2,000.00 527 Pcs Trash Can (with Plastic Swing Lid L-27, W- 17., H- 40.5 Cm) 5 350.00 1,750.00 528 Pcs Toothbrush (extra Clean Toothbrush 5 Pk -soft) 20 182.40 3,648.00 529 Pcs Hairbrush (natural Wood Hairbrush Comb) 20 120.00 2,400.00 530 Pcs Comb (1 Dozen Suklay 3-hole X Sz-28 Big) 20 90.00 1,800.00 531 Pcs Toothpaste (red 100 Ml) 20 58.20 1,164.00 532 Pcs Plastic Tumbler 20 300.00 6,000.00 533 Pcs Razor (twin Blade Disposable Razors) 20 120.00 2,400.00 534 Pcs Nail Clipper (stainless Nail Clippers H-8 Cm Wt-0.046 Kg) 20 84.00 1,680.00 535 Pcs Nail File (12 Pcs Red Nail File (medium) 20 50.00 1,000.00 536 Pcs Deodorant (roll On 50 Ml Bottle) 20 150.00 3,000.00 537 Pcs Face Towel (basic Face Towel - Free Size) 20 110.00 2,200.00 538 Pcs Feminine Napkin (silk Floss 12 Pcs) 50 45.00 2,250.00 539 Pcs Dust Catcher With Broom (2n1 Broom Dustpan Set Windproof Floor Sweeper With Broom) 10 350.00 3,500.00 540 Pcs Feather Duster (soft Magic Feather Duster Long Size And Colorful Colors (plastic) 10 110.00 1,100.00 541 Pcs Wash Rags (round Rags) 10 30.00 300.00 542 Pcs Floor Mop (magic Spin Mop With Bucket 360° Rotating Floor Cleaning Plastic Liner) 10 900.00 9,000.00 543 Pcs Garbage Can (super Convenient Mini Flip Lid Trash Can (plastic) 10 150.00 1,500.00 544 Pcs Sponge (high Density Double-sided Dishwashing Sponge 7x10x3 Cm) 10 118.00 1,180.00 545 Pcs Spray Bottle (garden Sprayer Capacity: 500ml) 10 155.00 1,550.00 546 Pcs Table Napkin (1 Ply 40s Sheets Folded) 10 50.00 500.00 547 Pcs Place Mat (table Placemat Pvc Anti-slip Placemat Washable Durable Kitchen S:30x45cm) 10 50.00 500.00 548 Set Plates (12 Pcs Plates 8-inch Melamine White) 3 634.00 1,902.00 549 Set Drinking Glass (drinking Glass 10 Oz Tall Clear Tumblers Set Of 6 L=5.5cm H-12 Cm) 1 718.00 718.00 550 Pcs Pitcher (durable Crystal-clear Glass 1.5 L) 2 300.00 600.00 551 Pcs Bowl (serving Bowls, Clear Glass 20 Cm) 2 130.00 260.00 552 Pcs Water Pail (utility Pail With Metal Handle 10l Color: Red/ Blue L-27cm, W-27cm, H-26 Cm 4 350.00 1,400.00 553 Pcs Laundry Bar Soap (scrubber Bar 125g) 120 20.00 2,400.00 554 Pcs Clothesline (1 Pc Nonslip Clothesline 35 M) 20 140.00 2,800.00 555 Pcs Clothes Pin (laundry Clothes Pins Spring Clips 24 Pcs Plastic) 20 100.00 2,000.00 556 Pcs Wash Basin Plastic (laundry Basin 23 Inch) 5 250.00 1,250.00 557 Pcs Laundry Bag Set (4 Pcs/set Laundry Washing Bag- 1 Pc M(30cmx40cm) 1pc L (40cmx50cm) 1pc Xl (50x60 Cm) 10 200.00 2,000.00 558 Pcs Ironing Board (ironing Board With Stand Portable 36"iron Board (70cm To 86 Cm) 5 1,600.00 8,000.00 559 Pcs Flat Iron (non-stick Teflon Saleplate Spray Function Ht &width 251x170x120mm 5 1,000.00 5,000.00 560 Pcs Pants. Standard Slacks Medium Size 3 1,000.00 3,000.00 561 Pcs Polo. Public School Uniform Type. Medium Size 3 500.00 1,500.00 562 Pcs Blouse. Public School Uniform Type. Medium Size 3 500.00 1,500.00 563 Pcs Skirt. Commonly Used In Public School Type. Medium 3 600.00 1,800.00 564 Pcs Long Sleeves. Cotton, Medium Size 3 1,000.00 3,000.00 565 Pcs T-shirt With Collar. Cotton, Medium Size 3 800.00 2,400.00 566 Pcs T-shirt Without Collar. Cotton, Medium Size 3 500.00 1,500.00 567 Pcs Maong Pants. Medium Size, Female Cut, Medium 3 1,000.00 3,000.00 568 Pcs Maong Pants. Medium Size, Female Cut, Medium 3 1,000.00 3,000.00 569 Pcs Maleta. 7kg Hand Carry Luggage Travel Bag. 360 Universal Wheels. Divided Internal Space. 57 Liters Capacity. 40 X 57 X25 Cm Dimension. 3 1,500.00 4,500.00 570 Pcs Chef’s Hat. Chef Cap For Men Women Chef Head Cap Breathable Hat Fast Food Restaurant Coffee Shop Work Wear. Large Size. Black 20 250.00 5,000.00 571 Chef’s Hat. Chef Cap For Men Women Chef Head Cap Breathable Hat Fast Food Restaurant Coffee Shop Work Wear. Medium Size. White 20 250.00 5,000.00 572 Pcs Chef’s Hat. Chef Cap For Men Women Chef Head Cap Breathable Hat Fast Food Restaurant Coffee Shop Work Wear. Small Size. White 20 250.00 5,000.00 573 Pcs Chef’s Apron. Black Apron With 2 Large Pockets Adjustable Apron Halter Neck Unisex Dirt And Stain Resistant. Large 20 450.00 9,000.00 574 Pcs Chef’s Apron. Black Apron With 2 Large Pockets Adjustable Apron Halter Neck Unisex Dirt And Stain Resistant. Medium 20 450.00 9,000.00 575 Pcs Chef’s Apron. Black Apron With 2 Large Pockets Adjustable Apron Halter Neck Unisex Dirt And Stain Resistant. Small 20 450.00 9,000.00 576 Pcs Hair Net. Unisex Hair Net Cap Hair Mesh Weaving Wig Cap Hair Styling Tools Nylon Hair Nets Hollow Out High. Black 300 30.00 9,000.00 577 Dozen Hangers (12 Pcs. Plastic Hanger) 1 181.00 181.00 578 Pcs Wash Basin. Aluminum 32" Diameter. 6 1,500.00 9,000.00 579 Pcs Washing Machine. 7.0 Kg Digital Inverter Fully Automatic Top Load Washing Machine (water Level: 5, Gross Weight: 31kg, Net Weight: 27 Kg Gross Dimension: (wxhxd) 580x890x600mm Net Dimension: (wxhxd)= 540x857x568mm) 3 25,000.00 75,000.00 580 Pcs Vacuum Cleaner (heavy Duty Gas 12-25 Pl Wet And Dry Vacuum Cleaner/ Extractor With Power Socket System 1,250 W Weight-9kg, Max Input Power- 1,250 W, Max Vacuum Power-200 Mbar) 2 12,000.00 24,000.00 581 Pcs Socks (cotton Socks Unisex High Street Socks Sixe:38-44 5 200.00 1,000.00 582 Pcs Dress (sleeve Ruffle Hem Plain Elegant Red Small, Medium, Large) 3 500.00 1,500.00 583 Pcs Slippers (sizes 7-10, Flipflop Brand Light Weight And Durable 5 150.00 750.00 584 Pcs Mattress For Single Bed (30x75 Single Size Polyester 3.5 Inch Thick) 5 4,440.00 22,200.00 585 Pcs Pillows (foam Pillow 4x12"x20") 5 426.00 2,130.00 586 Pcs Bedsheets (cotton Full Garterize 3n1 Bed Sheets, For Single Bed Size) 5 1,100.00 5,500.00 587 Pcs Alarm Clock (stopwatch, Digital Timer) 5 850.00 4,250.00 588 Pcs Goalball, Standard Size And Weight, Blue 2 20,000.00 40,000.00 589 Pcs Basketball, Standard Size 2 2,000.00 4,000.00 590 Pcs Soccer Ball, Standard Size 2 1,500.00 3,000.00 591 Set Bocce Balls, 100mm Diameter, 4 Balls Colored Red, 4 Balls Colored Green, With Palena Ball Color White. Set With Bag. 2 20,000.00 40,000.00 592 Piece White Cane For Adults- Foldable Aluminum With White Anodized Finish And Plastic Tip. The Tube Has A Spring Lock Pin For Adjusting Handle Height From 58-94 Cm. 10 1,500.00 15,000.00 593 Piece White Cane For Kids- Foldable Aluminum With White Anodized Finish. The Tube Has A Spring Lock Pin For Adjusting Handle Height From 58-94 Cm. 10 1,150.00 11,500.00 594 Set Chess Board For Blind. Plastic Pieces With Special Markings, Board With Pattern To Distinguish White And Black Squares With Slots To Hold The Pieces. At Least 12"x24" Plastic Board. 4 5,000.00 20,000.00 595 Set Scrabble Board For Blind. Made Of Plastic With Special Markings On Tiles And Board. At Least 18"x18" Board. 5 4,000.00 20,000.00 596 Set Dolch Basic Sight Words. (bitay Max). Printed On White Tarpaulin 2 Ftx 3 Ft Binded With Two Wooden Sticks. With String (sabitan). Words At Least 2" Height Black, Arial Font Style. 5 1,500.00 7,500.00 597 Pcs Meter Stick, 100cm Stainless Steel Ruler 5 500.00 2,500.00 598 Box Braille Paper. White Fanfold Tractor-feed Braille Transcribing Paper: 8.5 X 11 Inches, 3-hole And 19-hole Punch. Dimensions:10.1 × 11.5 × 5.4 Inches. 1000 Sheets 7 10,000.00 70,000.00 599 Box Braille Paper. 11.5"x 8.5". 1000 Sheets 5 7,000.00 35,000.00 600 Box Swell-touch Paper 11 X 11.5-in- 100 Sheets 1 10,000.00 10,000.00 601 Unit Braille Machine, Standard. With Leather Cover. With Warranty On Parts. 2 49,500.00 99,000.00 602 Pcs Braille Slate. 27 Lines, 30 Cells Per Row, Black 25 1,000.00 25,000.00 603 Pcs Braille Contraction Pamphlet. Unified Contraction Pamphlet 4"x6". 25 600.00 15,000.00 604 Pcs Contraction Pamphlet. Nemeth Code. 4"x6". 25 600.00 15,000.00 605 Pcs Cranmer Abacus 25 650.00 16,250.00 606 Pcs Braille Stylus. Round Or Y Shape 25 200.00 5,000.00 607 Set Geometric Measurement. Set Of Protractor, Ruler And Triangles Made Of Plastic With Embossed Marking For The Blind, Standard Size. 24 1,000.00 24,000.00 Delivery Terms: Within 30 Days Drop Off Points: General Santos City Sped Integrated School – Quezon Avenue, Brgy. West, Gsc (ilrc) Payment Terms: Payment To The Service Provider Shall Be Made Through Philippine Veterans Bank Lddap-ada / Mds. In The Case Of Accounts Maintained In Other Bank, Bank Transfer Fees Shall Be Chargeable Against The Creditor’s Account. ***nothing Follows*** Grand Total 7,338,507.00 2. The Deped Now Invites A Bid For The Above Procurement Project. Bidders Must Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project With An Amount Of At Least 50% Of The Abc To Be Bid For Non-expendable And 25% Of The Abc For Expendable. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, I.e., In Section Ii, Instructions To Bidders. Bids Received That Exceed The Abc Per Lot Shall Be Rejected At Bid Opening. The Department Of Education, Division Of General Santos City Division Through Its Bids And Awards Committee (bac) Now Invites Bids For The Herein-mentioned Goods. Delivery Of The Goods Is Required On The Expected Delivery Date(s) Stated Herein. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act.” Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. A Complete Set Of Bidding Documents In Soft Copy Only May Be Purchased At Deped-division Of General Santos City Bac Secretariat, Located At Tiongson St., Lagao, General Santos City Upon Submission Of A Letter Of Intent, And Payment In Cash On A Non-refundable Fee By Interested Bidders To The Deped Division Cashier. Only Bidders Who Purchased The Bidding Documents Provided Below Shall Be Allowed To Submit Bid/bids Not Later Than The Scheduled Receipt And Opening Of Bids. Bidding Document Price Lot Number Price Lot No. 1 P 10,000.00 5. It May Be Viewed Or Downloaded After Payment From The Website Of The Philippine Government Electronic Procurement System (philgeps), Www.philgeps.gov.ph. The Schedule And Venue Of The Procuring Activities Are As Follows: Activity Date And Time Venue Pre-bid Conference February 19, 2025 2:00 P.m. (wednesday) Sds Conference And Online Via Google Meet Issuance Of Bidding Documents Until March 5, 2025 9:00 A.m (wednesday) To Be Sent To Bidder’s Email Address After Payment Of The Bidding Documents Receipt And Opening Of Bids March 5, 2025 10:00 A.m. (wednesday) Division Office/google Meet Prospective Bidders Are Strongly Encouraged To Order Or Download The Electronic Copy Of The Bidding Documents From The Philgeps Website: Www.philgeps.gov.ph, For Them To Be Included In The Document Request List Of The Project. The Pre-bid Conference Is Open To All Interested Parties Who May Have Or Have Not Bought The Bidding Documents. 6. Bids Must Be Physically Delivered To The Address And On The Date And Time Stated Herein. Submission Of Digital Copy Of The Bidding Documents Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. A Valid Bid Securing Declaration Must Accompany The Bid(s) In Lieu Of Bid Security. Bids Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend The Opening Of Bids At The Address, Date And Stated Herein. Late Bids Shall Not Be Accepted. 7. The Deped-division Of General Santos City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Not Award The Contract(s), Or Annul The Bidding Process Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 8. For Further Information, Please Refer To: Ofelia S. Panes Michael Jhon A. Del Sol Administrative Officer Iv (records) Administrative Assistant Ii Bac Secretariat Head Bac Secretariat Member Email: Ofelia.panes@deped.gov.ph Email: Bac.depedgensan@deped.gov.ph Cell No. 09692673871 Cell No. 09278865516 Approved By: Mervie Y. Seblos, Cese Oic – Assistant Schools Division Superintendent Bac Chairperson Bacsec/mds

Details: As part of the Bordstromtech-rl II) funding program, a system control for the research vessel Coriolis is to be purchased. This project is funded by the Federal Ministry for Digital and Transport and coordinated by Now-gmbh. The Helmholtz-Zentrum Hereon GmbH (HEREON) is a non-profit research institution and one of the 18 member institutions of the Hermann von Helmholtz Association of German Research Centers EV. 90% of Hereon's expenses are financed by the federal government (BMBF - Federal Ministry of Education and Research) and 10% by the four consortium states (Schleswig-Holstein, Hamburg, Lower Saxony and Brandenburg). The company's statutory task is to conduct research and development in a multidisciplinary network, particularly in the fields of materials research, coastal, climate and environmental research and regenerative medicine. 40068116 Preliminary performance description for the control of the hydrogen system laboratory FS Coriolis. On the Coriolis, a hydrogen-based energy system is being implemented for the innovative use of alternative fuels. This system supplements the diesel-electric drive in order to be able to operate, for example, in highly sensitive nature conservation zones and to achieve emission-free, as quiet a ship operation as possible. Further information on the research vessel Coriolis can be found on the following website: https://www.hereon.de/innovation_transfer/coriolis/index.php.de On the Coriolis, a metal hydride storage system (MHS) is used for the chemical solid storage of hydrogen, which supplies a fuel cell (BZ) with hydrogen. The electrical power generated in the fuel cell is fed into the electrical infrastructure of the Coriolis and thus supplements the battery and the diesel-electric system. The fuel cell and metal hydride storage system are connected to one another and to the ship's heating system via a thermal management system (KW system). The hydrogen for filling the metal hydride storage is bunkered onto the ship via a bunker station. The entire hydrogen system is integrated into the ship's infrastructure as a scientific research system as a hydrogen system laboratory (H2SL). The H2SL is set up independently of the ship's systems with regard to its classification by Bureau Veritas (BV) as scientific cargo. With regard to ship integration, particular attention is paid to the interfaces that connect the H2SL with the ship's infrastructure. The entire H2SL has its own system control based on an PLC, which exchanges signals with the corresponding ship systems (alarm monitoring system - AMS and power management system - PMS) via communication interfaces. In addition, there is a research data transmission system (LUDMILA) on the ship that is independent of the H2SL, via which all system data (internal and external switching states, measured values and input commands) is stored and transmitted for further processing by the scientists on land at Hereon. All subassemblies required for operation of the H2SL, including all actuators and sensors, are controlled by the H2SL control system. The subassemblies are divided as follows: - Tank connection room (TCS) - Bunker system (BS) - Metal hydride storage (MHS) - Cooling water system (KW system) - Inert gas system (IGS) ? The H2SL control system communicates directly with the following external controls: - SCADA system of the Coriolis O AMS O PMS - Internal control of the fuel cell - I added the ventilation system because in the event of a failure the entire H2SL has to go into an alarm state. Is there no direct connection? The H2SL control system should be operated via a visualized control panel (HMI) on the control cabinet of the H2SL control system and via a network-connected HMI (laptop, or similar). Manual input devices (emergency stop buttons, control knobs) must be provided on the control cabinets (main cabinet and sub-distributions) and in the vicinity of the sub-assemblies. All safety-relevant signals from the ship are exchanged with the H2SL control system via a hard-wired safety chain and a safety-related bus. The process communication between the H2SL control system and the PMS is carried out via a bus system. The H2SL is designed as scientific cargo in terms of classification, so that the H2SL control system must meet the requirements of the maritime classification, but the controllers, for example, do not have to be redundant or separated between the alarm management and the process sequences. Operating states The individual operating states or sequences always take place under complete and continuous monitoring of all limit and threshold values of the alarm management. A manual selector switch is provided on the main cabinet of the H2SL, which enables or blocks the operation of the H2SL. - Fully automatic operation of the system O Operation without manual intervention in the control of the H2sl O Start/stop/operating specifications from external control - Semi-automatic operation O Operating sequences that require one or more manual interventions/inputs during operation - Manual operation O Manual actuation of the control output signals taking into account interlocks (e.g. valve positions) and alarm thresholds. Required scope of delivery: - Hardware installed in control cabinets/sub-distribution boards - Installation of the control cabinets on board - Connection of all electrical connections on board the ship - Programming of control sequences - HMI visualization - Hardware documentation - Software documentation including provision of source code - Addressing of the communication interfaces Due to the limited number of characters, the full service description could not be made public. Please refer to the tender documents.