Medicine Tenders

Details: Description Procurement Of Inclusive Learning Resource Centers Assistive Devices, Equipment, Supplies And Materials (lot 10- Arts And Crafts Support Service Area: Skills Development) 1. The Deped Schools Division Of Eastern Samar, Through The General Appropriation Act Of 2024 Intends To Apply The Sum Of ₱ 597,951.44 Being The Abc To Payments Under The Contract For Procurement Of Inclusive Learning Resource Centers Assistive Devices, Equipment, Supplies And Materials (lot 10- Arts And Crafts Support Service Area: Skills Development) Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Deped Schools Division Of Eastern Samar Now Invites Bids For The Above Procurement Project. Bidders Should Have Completed, Within 5 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 4. Prospective Bidders May Obtain Further Information From Deped Schools Division Office Of Eastern Samar And Inspect The Bidding Documents At The Address Given Below During Monday-friday, 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Php 1,000.00. It May Also Be Downloaded From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Nonrefundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Deped Schools Division Of Eastern Samar Will Hold A Pre-bid Conference On January 13, 2025, 10:00am At The Bac Office, Deped Schools Division Of Eastern Samar Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before January 27, 2025, 9:00am Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 27, 2025, 10:00am At The Given Address Below Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Only The Proprietor Or Authorized Representative May Be Allowed To Purchase Bidding Documents. Letter Of Intent (loi), Special Power Of Attorney (spa) (for Authorized Representative), And Drl (document Request List From Philgeps) Are Required Upon Purchase. 11. The Deped Schools Division Of Eastern Samar Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Items, Specifications, Quantity Of Delivery, And Abc: Sewing Machine Singer,15ch 179 Sewmaster, Automatic Bobbin Winder, Variable Stitch Length Control, Forward And Reverse Function, Numbered Dial Tension, Threadle Or Motor Options, Drop Feed Knob 5 Piece Utility Shelf, 1713s Utility Shelf 2 Pieces Table, Folding Table Ft-02 1200mm L X 400mm D X 750mm Ht., Structure: Melamine 3 Pieces Chairs, Cod Armchair Backrest Wood Horn Chair, 43x48x74, Material: High Quality Iron Wood, Max:150kg 6 Pieces Storage Cabinet, Dimension: 48*30*83cm, Material: Plastic, 3 Pieces Cork Bulletin Board, Wooden Frame, 30x40cm 1 Piece Glue Gun, Mitsushi Mit-gl40 40w, 100-240v, Hot Melt Glue Gun 2 Pieces Acrylic Color, Faber Castell, 12ml, 12 Colors 3 Pieces Scissors, Maped Reflex 3d Vivo Scissors, 16cm 4 Pieces Cutters, Ida Wallpaper Blade Cutter, Length 15cm, Width: 15cm 3 Pieces Watercolors, Prang 16 Watercolor Set 3 Sets Art Paper (multiple Colors), Avia Colors Assorted Colored Paper, 250 Sheets, 80 Gsm, Size: 8.5" X 11" 3 Reams Paint Brushes, Deli 73885 Brush Set 3 Pieces Yarn, Color, Dmc Natura Happy Cotton, 100% Cotton Yarnfor Crochet, Knitting And Yarn Crafts, Thickness: Light (8 Ply), Weight: 20 Grams, Length:43 Meters 10 Pieces Glue, Elmer's Glue, White 225 Grams 5 Pieces Colored Pencils, Staedtler Colored Pencil 136 C36 Luna Permanent 36 Colors 3 Sets Colored Pens, Faber-castell Coloring Pen, 12 Colors 3 Sets Sewing Pins, 40 Pieces 3 Pieces Sewing Needles, 16 Pcs Set Hand Sewing Needle, Size: S: 4cm (8pcs), M:4.5cm (6pcs)* L:5cm (2pcs), Mateial;stainless 10 Pieces Rotary Cutter, 45mm Fabric Rotary Cutter, Length:45m, Material:stainless Steel Blade+abs Handle, Color: Orange. Length: 165mm, Blade Diameter:45mm, Suitable For:leather Fabric Vinl Fiber Paper 2 Pieces Tape Measure, Deli 79650 Measuring Tape 150cm/60 Inches (1.5m*7mm) 10 Pieces Crochet Hooks, 100pcs Crochet Hook Set,perfect Round Point, Material: Plastic+metal, Size:18*13*3cm, Hook Size: 2mm,2.5mm,3.0mm,3.5mm,4.0mm,4.5mm,5.00mm,5.5mm,6.0mm,6.5mm 2 Pieces Knitting Needles, Sizes: 4,5,6 And 8 2 Pieces Crochet Thread, 5 Ply Monaco 100% Mercerized Cotton, Assorted Colors, Length:105 Meters, 50 Grams 20 Pieces Sewing Thread, Apple Spun Polyester Sewing Thread, Assorted Colors, 100 Meters, Polyester Material, 10pcs/box 2 Boxes Convertible Drawing And Drafting Table, Size: 24”x36” ▪color:raw Sienna / Brown ▪weight: 10-11kg 1 Piece Studio/painting Easel, Sizes: 85" - 120" Tall 2 Pieces Table/desk Painting Easel, Could Be An H Or An A Easel Type, For A Easel 38" To 75", For H Easel 84" To 96" 5 Pieces Manual And/or Electric Pencil Sharpener, Pencil Sharpener Hand Crank Manual Mechanical Pencil Sharpener,aluminum Alloy Knife Structure,cutting Outer Diameter Of 6.5-8mm Pencil 4 Pieces Wooden Mannequin, With Stand 11.5/14/21/30cm Wooden Human Mannequin Model Artist Movable Limbs Doll 2 Pieces Transparent Edge T-square, Hardwood Blade Dimensions: 30x13.5x0.2 Inches Weight: 14.4 Ounces Color: Wood Size: 36’’ 2 Pieces Carpentry Tools, Tool Set Includes: 1 – 9” Plastic Torpedo Level 1- Magnetic Bit Holder 1” Cr-v Bits Nut Drivers: 3/16”,1/4”,9/32”,5/16”, 11/32”,3/8” 10ft/3m Tape Measure 150mm Mini Saw 7” Locking Pliers 7-12” Diagonal Cutting Pliers 8” Long Nose Pliers 8” Adjustable Wrench 8” Water Pump Pliers Zinc-alloy Utility Knife Utility Knife Blade Black Cable Ties 160oz Claw Hammer Combination Wrench: ¼”, 5/16”, 3/8”, 7/16”. ½”, 9/16” Precision Screwdrivers:ph1, Ph0, Slotted:1/4, 2.0, 2.4, 3.0mm Metric Hex Keys: 1.5, 2, 2.5, 3, 4,5,5.5, 6mm Sae Hex Keys: 1/16”, 5/65”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, ¼” 16” Zipper Tool Bag Item Weight; 8.8 Pounds 17.7x9x9 Inches 2 Sets T50 Staple Gun, Size: 7x9x3 Inches 5/16” Staples 3 Pieces Slop Sink, Size: 30.2x18.4x10.0inch Color: 30”m Style: Single Bowl Material: Stainless Steel Thickness: 3.0-1.2mm 1 Piece Roofing Square Dual Marking Right Angle Picture Framing Carpenter Ruler, Steel 90 Degrees Roofing Square Measuring Size: 20x 30cm/8x12” Rustproof Size: 30x20.5x 20.5 Weight: 0.16kg 3 Pieces Professional Compound Mitre Box & Saw, Adjustable Angle 20x8x9 Inches Miter Box 22 Inches Back Saw 2 Pieces Drawing Lamp, Overall Dimensions: 1.5 “w X 3.5 “d X 29.5 “h Long, Bendable Neck 21” (53 Cm) 28 Led Bulbs Stainless Steel Wattage: 1 Can Be Mounted To Table, Desk Or Easel Usb Plug 2 Pieces Artists Taboret Made Of Beechwood. Measures 35-1/2"h X 17-1/2"w X 14-1/2"d 1 Piece Open Shelves Utility Rack, 72" Height X 48" Width X 18" Depth Five Adjustable Shelves 4,000 Lb. Capacity Steel Frame Particle Board For Shelves Rivet Lock Design With Nuts And Bolts 2 Pieces Chisel Rack For Wood Carving, 3/4″ Thick, And 2 Pieces 3/8″ Tall Plywood Number Of Slots May Vary 2 Pieces Corner Clamp, Maximum Clamping Range 7.5cm, Generally 4 Right-angle Clamp All Together To Use. Material: Aluminum Type: 4 -inch 20.00 X 10.00 X 10.00 8 Pieces Decorative Realistic Artificial Fruits, Assorted Plastic Fruits And/or Eco-friendly Foam Material 2 Sets Geometric Shapes Set, 8-12 Shapes/forms Wood And/or Non-toxic Plastic Shapes Include Sphere, Square, Cylinder, Round Cylinder, Cone, Cube, Hexagonal Prism, Triangular Prism, Square Based Pyramid, Octagonal Prism, Pentagonal Prism, And 1/2 Sphere 2 Sets Geometric Designer Templates, Scale: 0-20 Cm/0-24 Cm Size : 8-1/4" X 5.1" (l*w) Plastic And/or Steel Material 4 Pieces Stack Rack, Dimension: 30 In H X 21 In W X 17 In L At Least 6 Shelves May Be Wooden Or Metal Materials Devised With Rollers To Roll The Rack In Any Location 4 Pieces Picture Frame And Miter Clamp, Weight: 2.5 Pounds Dimensions: 23.9 X 9 X 1.6 Inches Wood Material 4 Pieces Heat Gun, Power: 2,000 Watts Temperature: 50 / 380 / 570 Celcius Steps: 3 Steps Air Flow: 500 / 300 / 500 L/min 4 Pcs Nozzles (air Blast, Reducing, Reflector, Paint Scraper) 1 Pc Scraper 4 Pieces Hot Plate Single Electric Stove, Power:1000w Non-stick Coating Auto-thermostat Various Heat Operations Operating On/off Indicator Light 2 Pieces Tape Dispenser, Weight: 1 Kg Hard Durable Plastic Material 2 Pieces Multi-function Three-hole Puncher, 11.75 X 2.75 X 2.75 Inches High Quality Metal Construction With Clip-in Rings 2 Pieces Metric Scale, 30 Centimeters In Length Scale: 1:1, 1:10, 1:2, 1:20, 1:5, 1:50, 1:100, 1:200, 1:500, 1:1000, 1:1250 And 1:2500 4 Pieces Steel Tape Measure, Tape Rule With First 6 Feet Reinforced With Bladearmor Coating For Maximum Durability 11-inch Tape Standout; 16-inch And 19.2-inch Stud Center Markings Simplify Framing Jobs Mylar Polyester Film Extends The Life Of The Entire Blade Heat-treated Spring Provides Long Life And Smooth Blade Recoil Stanley's Limited Lifetime ; Measures 1-1/4-inch-by-25-feet 3 Pieces Heavy Duty Circular Saw, Corded Or Cordless Adjustable Depth Diameter: 4 1/2 In. With Electric Brake Maximum Cutting Depth At 45 Degrees: 1 In. Maximum Cutting Depth At 90 Degrees: 1-9/16 In. Maximum Speed: 4500 Rpm Spindle Lock 20 Volt 5.5 Lb. 4 Pieces Abrasive Disc Cutter Machine, Electric Powered 18.5” H X 12.2” W X 21.25” D 2200w 14” Blade Diameter 15 Amps Motor (3600 Rpm) Cutting Capacity Of 4.5” At 90˚ And 45˚ 2 Pieces Manual Canvas Pliers, Specifically Designed For Electrical And Mechanical Works 3 Pcs. In 1 Set 1 Combination Plier 6" 1 Cutter Plier 6" 1 Long Nose 6" Offers Comfortable Hand Grip 3 Set Jet-bow Compass Set, Set Includes 6" Speed Compass With Inter-changeable Pen, Pencil, Divider Parts, And Replaceable Needle Points. 4½" Bow Compass With Inter-changeable Pen, Pencil, And Divider Parts. 6" Beam Bar And Slide Coupling For Circles Up To 28" In Diameter And 6" Friction Divider With Self Centering Gear Head And Replaceable Needle Points. Set Also Includes Mechanical Lead Holder, Slip Handle For Spare Ruling Pen, Lead Pointer, Center Tack, And Screwdriver. Packaged In See-through, Hard Plastic Case. 2 Sets Human Head Model, Plastic, Life-size Anatomical Cast With Removable Jaw And 3 Removable Lower Teeth Type: Skull Model Material: Pvc Dimension: App.21x15x19cm/8.27x5.91x7.48in Color: As The Picture Shown Quantity: 1 Set 1 Set Screw Drivers Set, Philips Or Slotted Sl 3/16 In. X 3 In. (x2), 3/16 In. X 6 In., Sl 1/4 In. 1.5 In., Sl 1/4 In. X 4 In. (x2), Sl 1/4 In. X 6 In. Ph1 X 4 In. (x 2), Ph2 X 1.5 In., Ph2 X 4 In. (x2) 2 Offset Screwdrivers 6 Precision Screwdrivers: Ph0, Ph1, Sl 1.4 Mm, Sl 2 Mm, Sl 2.4 Mm, Sl 3 Mm 2 Sets Pliers And Grip Set, 10 Piece Tray Set Includes 1 Each Of The Following: 10r, 10wr, 7wr, 7r, 7cr, 6ln, 9ln, 5wr, 6r, 11r Weight: 11.80 Lb 28.00 X 11.80 X 1.30 Inches 2 Sets Artist Stool With Wheels, Height Adjustable & 360° Swivel Soft Pu Leather Cushion Detachable Design Dimension: Seat Diameter: 16.2" Seat Height: 25.6"-35.8" Full Height: 37.4"-47.6" Max Weight Capacity: 300lbs 6 Pieces Screen Print Squeegee, Material: Natural Rubber, Wood, Stainless Hardness: 70 Durometer Length: 25cm/10" Width: 10cm/3.9" Thickness: 2.3cm/0.9'' 8 Pieces Mixing Paint Palette, Material: Stainless Color: Silver Size: Approx 6.75" X 5.5"compact 12 Pieces Carving Chisels For Wood, Material: 45# Steel And Wood Color: Wood Color + Silver Quantity: 12 Pcs Total Weight : 892 Kg Wooden Handle Length Of Each Chisel: 95mm/3.74” Total Length Pf Each Chisel: 20.5mm / 8.07” Size: 1x V-straight Parting Tool: 14.6mm / 0.57” 1x Round Nose Chisel: 7.8 / 0.31 1x Skew Wood Turning Chisel: 7.8mm / 0.31” 1x Bent Chisel: 7.8mm / 0.31” 1x Wood Chisel: 7.8mm / 0.31” 1x Skew Wood Turning Chisel: 8mm / 0.31” 1x Pointed Wood Chisel: 8mm / 0.31” 2x Straight Chisel: 7.8mm 13.7mm”/ 0.31” 0.54” 3x Straight Gouge: 12.8” 16.1mm 11.7mm/ 0.50” 0.63” 0.46” 2 Sets Files Set For Jeweler, Wood Carving, Craft Metal And Glass Stone, 10 Pcs / Set 5x180mm Stone Precision Needle Files Tool Woodworking Carving The Craft Metal Rasp Wood Hand Tools Material: Metal Color: Gray/ Silver Model: Needle Files Size : 14.5x1x1 Weight: 0.05 Kg 2 Sets Heavy Duty Multi-purpose Bench Vise, Jaw Width: 5", Opening: 4-1/4" Durable Cast Steel Construction Head Swivel 360 Degree Full 360-degree Rotational Jaws Unique "v" Jaws Provide 4 Point Holding Power 2 Pieces Anvil, Weight: 55 Lbs. (sculpture) 9 Lbs. (jewelry Works) Metalsmith, Jewelers Forming Tool, Essential For Jewelry Repair, Shaping, Flattening, Hardening Metals Material: Iron Surface Size: (l X W X H): Approx. 6 X 3.3 X 9cm/2.36 X 1.3 X 3.54inch, Height: Approx. 5.5cm/2.17inch 1 Piece Welding Protective Suite, Made Of High-quality Denim Material, It Can Be Worn Many Times, It Will Not Fade For A Long Time. Unique And Comfortable Design, Wear-resistance And Dirty Resistance. Reinforced And Stitched The Crotch, Cuffs, Pockets To Prevent Accidental Tearing. The Highly Elastic Cuffs Make It Comfortable And Convenient To Wear. Size: 170 Height: 168-173cm Waist: 76-84cm/29.9-33 Inches Weight: 57.5-135kg 5 Pieces Welding Apron, Features: Material: Constructed With Artificial Cow Suede Which Is Not Only Durable But Also Flexible, And The Apron Offer Puncture Resistance, Tear Resistance And Cut Resistance. Size: (approx) (lxw) 90x60cm/35.4x23.6inch, Long Full Coverage Apron Protects You Until The Knee When You Are Working. Friendly: The Straps On The Waist Can Be Adjusted To Fit Your Body Better. They Are Designed To Hang Over The Shoulder Which Means That Weight Is Distributed Evenly Over The Shoulders. Never Suffer Neck And Back Pain Again. Pockets: 6 Pockets For Tools And Work Accessories, Include One Cell Phone Pocket And One Pencil Pocket. You Can Put Everything You Need Close To Hand In It Instead Of Constantly Search For Them. The Cell Phone Pocket Is Deep To Prevent The Phone From Falling Out. Application: Not Only For Woodworking And Welding But Also Useful For Many Other Work And Home Tasks Like Bbq And Gardening, Unique Gift Apron For Men, Women, Mothers, Fathers. Specifications: Material: Artificial Cow Suede Color: Yellow Size: (approx) (lxw) 90x60cm/35.4x23.6inch Package Included: 1 Pc X Apron 5 Pieces Welding Hood Caps, Flame Retardant Cloth Full Protection This Welding Hood Offers An Essential Mix Of Durability, Comfort And Protection. The Hood Features A Mesh Lining To Allow Sweat Vapour To Quickly Evaporate The Presoftened, Lightweight, Air Cushioned Fabric For Maximum Comfort. This Hood Can Protect Your Neck, Face And Head From Welding Fire Flash, Splash Very Well. Wear-resistant, Fire-retardant, Spark-proof, Double Protection Of Personal Safety And Sweat Absorption Specification: - Long :approx. 45cm/ 17.72inch - Shoulder Width: Approx. 43cm/16.93inch(xl) 5 Pieces Welding Gloves 10.5" Welding Leather Gloves Hgvc01 *winland* Product Description • Size: 10.5" • Use For Driver, Machining Operator Etc. • All Applications Which Require A High Level Of Anti-skid And Abrasion-resistant • Applying Universally To The Transporting And Cargo Handling Workers, Recycling Work, And Horticulture Workers, Drivers And Etc. • Cow Split Leather Gloves • Full Palm, Full Lining • Made With Top Quality Material For Industrial And Commercial Use 5 Pieces Welding Protective Visitor Glasses, Protective Visitor Glasses: Anti-fog With Uv Protection Glasses Product Name：safety Eyewear Glasses Color：clear, Dark Grey Feature：protective Glasses Lens Color：clear, Dark Grey Style：work Safety Glasses Package：blister Size: 17*17*7cm 5 Pieces Welding Helmet, Ingco Auto Darkening Welding Helmet Ahm009 Viewing Area:90×35mm Cartridge Size:110×90×10mm Arc Sensor:2 Light State:din 4 Dark State:fixed Shade 10 Shade Control:unadjustable Power On/off:fully Automatic Sensitivity Control:unadjustable,auto Uv/ir Protection:din 16 Power Supply:solar Cells. Re-chargeable Battery .no Battery Change Required Switching Time:1/5000s,from Light To Dark Dark To Light:0.15-0.45s Auto Low Amperage Tig:≥20amps(dc), ≥20amps(ac) Operating Tep:-5°c~+55°c Storing Tep:-20°c~+70°c 5 Pieces Welding Mask, Product Details Of Heavy Duty Welding Mask (108x50x3mm) Movable Glass Impacted Resistant Shell Anti Wear Moveable Type Glass Packing: Polybag With Color Sticker 5 Pieces Hard Hat, Hard Safety Helmet With Chin Strap Color: Blue, Orange, White, Yellow Material: Acrylonitrile Butadiene Styrene (abs) Shell, With Six Point Adjustable Ratchet Suspension For Shock Absorbing And Elastic Chinstrap Tough, Lightweight, Durable With Six Point Adjustable Ratchet Suspension For Shock Absorbing And Elastic Chinstrap. A Hard Hat Is A Type Of Helmet Predominantly Used In Workplace Environments Such As Industrial Or Construction Sites To Protect The Head From Injury Due To Falling Objects, Impact With Other Objects, Debris, Rain, And Electric Shock. Durable, Lightweight And Comfortable 12 Pieces Compact Electric Kilns, Degree F (max): 2300°f Cone: 6 Firebrick: 3" Volt: 240 / 208 Watt: 3,600 Ampere: 15 Recommended Breaker (amp): 20 Receptacle: 6-20 Size Interior (wide X High X Deep): 13.5 X 13.25" Size Exterior Including Stand (wide X High X Deep): 22 X 28 X 25.5" Volume (cu Ft.): 1.22 1 Piece Heat Press Transfer Machine, Electric Powered 21.2 X 20.2 X 19.2 In. 220v 1800w 0-400˚f (0-220˚c) 0-999 Sec. 1 Piece Rubber Mallet, Rubber Hammerhead Fiberglass Handle Packing: Color Label Weight: 32oz 4 Pieces Ball Peen Hammer, Material: Fiberglass Handle & Steel Head Size: 16 Ounce Weight: 3.7 Pound 4 Pieces Cutting Mat, Flexible Cutting Mat A2 Size (24 X 18 Inch) Self-healing 5 Layered Double Sided With Marked Pattern And Grids (green) Material: Polyvinyl Chloride Color: Green Item Dimensions: 15 X 15 X 15 Centimeters Shape: Hexagonal Weight: 200 Grams 6 Pieces Heavy Duty Extension Wire, Heavy Duty Extension Power Strip With Safety Switch Protection Socket 4 Meters, Extension 3 Pieces 36” Smart Led Tv, Width 96.74cm, Gross Weight: 10.8 Kg, Net Weight 7.9kg, Height 57.18, Length 7.99cm, Screen Size: 43-inch, Tv Resolution: Full Hd 2 Piece Laptop Computer, Laptop Screen Size: 15 Inches, Graphics Chipset: Integrated, Storage Capacity:512gb, Storage Type: Ssd, Ports/interface: Usb 2.0, Usb 3.0, Vga, Processor Type: Intel Core I7, Number Of Cores: Dual-core, Os:windows, Weight:3 Kg, Battery Capacity 4910mah, Cpu Frequency: 2.9ghz 1 Piece Photo Printer, Wireless Photo All-in-one With Auto Duplex Printing Print, Scan, Copy Auto Duplex Printing Wireless, Wireless Pictbridge, Mopria, Airprint, Direct Wireless Recommended Monthly Print Volume: 30 - 100 Pages Operating System: Win 8 / Win 7 / Vista / Xp, Mac Os X 10.7.5 And Later Borderless Printing: A4 / Letter / 4 X 6" / 5 X 7" / 8 X 10") Standard Paper Input (front Tray): 100 Sheets (a4/ Ltr) / 20 Sheets ( 4 X 6 “ ) Paper Weight: 64 To 105 G/m2 Up To 300 G/m2 Dimension (w X D X H): 449 X 304 X 152 Mm Weight: 5.4 Kg Interface / Connectivity: Usb 2.0 Hi-speed / Wireless Lan /wireless Pictbridge, Direct Wireless Scanner Type: Flatbed 1 Piece Portable Sound System With Microphone, Led Lights 2 Wireless Microphone Wired Microphone / Guitar / Line In Mic Priority Over Voice On/off Line Out Remote Control Usb / Bluetooth / Nfc / Fm Capabilities Frequency Response: 50hz-20khz Power System: Ac Adaptor / 12vdc In / Internal Rechargeable Battery 100v-240v, 60hz Power Supply Adaptor 1 Set 50” Led Tv, Height: 64.42 Cm, Width:111.68cm, Length:5.99cm, Gross Weight:16kg. Screen Size: 50-inch Led, Net Weight: 11.6kg, Tv Resolution: 4k Ultra Hd, Connectivity: Wireless Lan Built-in (wi-fi), Hdmi Ports: 3, Usb Ports:1 2 Piece Soft Box With Stand, 2 Pcs Studio Lighting Softbox 50*70cm, 2 Pcs 2m Light Stand, 2 Pcs 45w Light Bulb, Photography Kit 100-240v, Maximum Height: 200cm/78", Collapsible Height:65cm/32" 2 Pieces Display Panel Board, Product Weight:8kg, Choose Type:fabric,number Of Panels:4,type: Pole And Panel,graphic Type: Loop Nylon, 900x600mm Or 1000x700mm 6 X 900mm Poles 25 Mm Diameter With Clips Weight Approx 11-14kg 1 Piece Magnetic Whiteboard, Size:4x8 (48x96 Inches) Feet, Aluminum Frame,with Sliding Whiteboard Marker/eraser Tray,protective Plastic Rubber Corners 1 Piece Chalkboard, Length: 60.5", Height: 36.5",unit Weight: 24.00 Lbs Per Unit Color: Black Duro-slate Over ¼”hardboard Backing, Full Length Chalk Tray 1 Piece Offline Mini Compressor, 220v 60hz, Type: Single Cylinder Piston Compressor With Air Tank, Power: 1/6hp, Speed: 1700r.p.m, Air Output Per Min/lit.:20-23l/min, Auto Stop, Start At 3bar (43 Psi) Stop At 4bar (57psi), Working Pressure:0-4 Bar, Air Tank:3.0l, Suitable For Airbrush With Nozzle 0.2mm-1.0mm, Weight: 5kg, Dimension: 31x13x31cm 1 Pieces Styrofoam Cutter, Material:plastic, Size:approx. 190x90mm, Power: 2xc Size Battery (not Included), Feature: Electric Wire Needle Shap, Stainless Steel Wire, Hardness And Diameter Of 0.19mm 1 Piece Potter’s Wheel/electric Potter’s Wheel, Detachable Abs Basin, Advanced High-quality Brushless Motor, Rotary Speed:0-300 Rpm, Pottery Wheel: 25cm, Pottery Forming Machine:350w,electric Pottery Wheel With Foot Pedal And Detachable Basin, Rated Voltage: Ac 110v, Wheel Diameter: 25cm (9.8"), Speed: 0-300r/min, Working Noise:,60 Db, Gross Weight: 14kg (31.1 Lb), Package Dimensions (lxwxh) 53x42x35cm (20.8"x16.53"x13.78") 2 Pieces Weather-proof Safety Box Circuit Breaker, Metal Enclosure Panel Box, Weatherproof, Height:300mm, Depth:150mm, Door: 0.8mm, Body: 0.8mm, Plate: 0.8mm, Metal Body,width:400mm 1 Piece Fire Blanket, 120x99x4cm (l X W X H) Woven Glass Fiber 2 Pieces Exhaust Fan, Size: 12" 9" 6" Rpm: 1350, 1320, 1290 Finish: Power Coated 2 Pieces Medicine Cabinet, Stainless 20x26x5 Inch Single Door Medicine Cabinet 1 Piece Smoke Detector, 120 Volts Ionization Sensor, Clamshell Packaging 1 Piece Disposal Bins, 50 Cubic Movable Bins 2 Pieces Abc = 597,951.44

Purchaser Name: Communal Non Commercial Enterprise Odessa Regional Center For Emergency Medical Assistance And Disaster Medicine | Еіс-код Споживача: 56xs0000krj60006. Адреси Об’єктів: М. Одеса, Вул. Іоганна Гена, 19; Вул. Водопровідна, 13/1; С.сичавка, Вул. Каштанова, 33; М. Ізмаїл, І.франка, 10; С.кубей, Вул. Успенська, 15а. Eic Коди Точок Обліку: 56zs25a0krj6o01j; 56zs25a0krj6o04d; 56zs25g0krj6o02v; 56zs25l0krj6o03g; 56zs25e0krj6o058. Планові Обсяги Постачання: Січень - Квітень 2025 Р. (12,0; 12,0; 10,0; 3,577 Тис.куб.м)

Purchaser Name: Territorial Medical Association Vinnytsia Regional Center For Emergency Medical Assistance And Disaster Medicine | Страхування Майна

Purchaser Name: enterprise of the Sumy Regional Council "Sumy Regional Center of Emergency Medical Aid and Disaster Medicine | Азс У М.конотоп

Purchaser Name: ENTERPRISE OF LVIV REGIONAL FOR THE SAKE OF LVIV REGIONAL CENTER FOR EMERGENCY MEDICAL ASSISTANCE THAT MEDICINE | Послуги Обов’язкового Страхування Цивільної Відповідальності Власників Наземних Транспортних Засобів (оцв)

Purchaser Name: Territorial Medical Association Vinnytsia Regional Center For Emergency Medical Assistance And Disaster Medicine | Послуги Обов’язкового Страхування Цивільно-правової Відповідальності Власників Наземних Транспортних Засобів

Purchaser Name: FEDERAL STATE BUDGETARY EDUCATIONAL INSTITUTION OF HIGHER EDUCATION MOSCOW STATE ACADEMY OF VETERINARY MEDICINE | Поставка Товаров Для Обстановки Зданий Академии (на Сумму 28 500 000 ₽ )

Details: Description Invitation To Bid For Ib No. G-010-25 Early Procurement (1st Opening) Supply/delivery Of Laboratory Reagents 1. The Provincial Government Of Davao Del Sur, Through The Cy 2025 General Fund (dsph) Intends To Apply The Sum Of Php. 9,995,800.00 Being The Abc To Payments Under The Contract For Supply/delivery Of Laboratory Reagents – Ib No. G-010-25 (1st Opening). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Select This For Lot-procurement: The Provincial Government Of Davao Del Sur, Through The Cy 2025 General Fund (pho-technical) Intends To Apply The Sum Of: Lot 1: Php. 1,968,380.00 Bidding Docs: Php. 5,000.00 Lot 2: Php. 3,828,700.00 Bidding Docs: Php. 5,000.00 Lot 3: Php. 1,867,850.00 Bidding Docs: Php. 5,000.00 Lot 4: Php. 2,330,870.00 Bidding Docs: Php. 5,000.00 Total: Php. 9,995,800.00 Bidding Docs: Php. 10,000.00 For Supply/delivery Of Laboratory Reagents – Ib No. G-010-25 (1st Opening) Being The Abc To Payments Under The Contract For Each Lot. Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Davao Del Sur Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 15 Calendar Days Upon Receipt Of P.o, Except For Item No. 2.13 – Staggered Delivery. Complete Delivery Shall Be Strictly Observed By The Supplier And No Partial Delivery Shall Be Allowed Except In Meritorious Cases Such As Fortuitous Event, Or By Act Of The Government Or Upon The Approval Of The Head Of The Procuring Entity. Notes: *the Supplier Shall Notify The Pgso A Day Before The Actual Delivery. *for Medicines, The Packaging Must Bear The Marking Government Property - Province Of Davao Del Sur. *cpr & Lto Shall Be Required During The Post-qualification. *place Of Delivery: Pgso *expiry: At Least One Year Shelf-life. Bidders Should Have Completed, For The Last 3 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Provincial Government Of Davao Del Sur And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. – 5:00 P.m., Monday To Friday: Ms. Norjanna M. Camaguin, Mpa Chief Administrative Officer Procurement Management Office Room 4, Executive Building, Barangay Matti, Digos City 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 31, 2024 – January 21, 2025 From The Given Address And Website Below: Office Address: Procurement Management Office Room 4, Executive Building, Capitol Matti, Digos City, Davao Del Sur. Website: Www.davaodelsur.gov.ph And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of The Following: Lot 1: Php. 1,968,380.00 Bidding Docs: Php. 5,000.00 Lot 2: Php. 3,828,700.00 Bidding Docs: Php. 5,000.00 Lot 3: Php. 1,867,850.00 Bidding Docs: Php. 5,000.00 Lot 4: Php. 2,330,870.00 Bidding Docs: Php. 5,000.00 Total: Php. 9,995,800.00 Bidding Docs: Php. 10,000.00 The Provincial Government Of Davao Del Sur Through The Bids And Awards Committee Shall Allow The Bidder To Present Its Proof Of Payment (official Receipt) For The Fees. Said Proof Of Payment Shall Be Presented In Person To The Bac Secretariat At The Procurement Management Office. [note: For Lot Procurement, The Maximum Fee For The Bidding Documents For Each Lot Shall Be Based On Its Abc, In Accordance With The Guidelines Issued By The Gppb; Provided That The Total Fees For The Bidding Documents Of All Lots Shall Not Exceed The Maximum Fee Prescribed In The Guidelines For The Sum Of The Abc Of All Lots.] 6. The Provincial Government Of Davao Del Sur Will Hold A Pre-bid Conference On January 07, 2025 At Ralota Hall, Gov. Douglas Ra. Cagas Cultural Sports And Business Complex, Barangay Matti, Digos City, Davao Del Sur, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Following Through Manual Submission. Late Bids Shall Not Be Accepted:  Advance Dropping (before January 21, 2025) - Procurement Management Office Room 4, Procurement Management Office (goods), Capitol Building, Matti, Digos City, Davao Del Sur.  Date Of Opening (january 21, 2025) - Ralota Hall, Gov. Douglas Ra. Cagas Cultural Sports And Business Complex, Barangay Matti, Digos City, Davao Del Sur. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 21, 2025 At 9:00 A.m. Ralota Hall, Gov. Douglas Ra. Cagas Cultural Sports And Business Complex, Barangay Matti, Digos City, Davao Del Sur. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Process As To Purchase Of Bidding Documents: A. A Special Power Of Attorney (spa) From The Proprietor Of The Company Or A Notarized Secretary’s Certificate If Corporation, Shall Be Presented In Case The Latter Opted To Send Representative/s In His/her Behalf. The Invitation To Bid No. (ib No.) And Project Title Must Be Specified Pursuant To Bac Resolution No. 2018 Series Of 2024. B. The Bidder Shall Accomplish A Bidder’s Assessment Slip To Be Signed By The Bac Secretariat, Bac Chairperson Or Bac Vice-chairperson In Absence Of The Former, And The Head Of The Procuring Entity. C. Payment Of Bidding Documents Fee At The Provincial Treasurer’s Office. D. Presentation Of The Official Receipt To The Procurement Management Office For The Release Of The Bidding Documents. Preparation Of Bidding Documents: A. Two-envelope System: A.1 Envelope 1 – Eligibility/technical Documents In 3 Sets, Book Bound, And With Proper Tabbing. A.2 Envelope 2 – Financial Documents In 3 Sets Book Bound, And With Tabbing. However, If It Will Not Exceed 10 Pages, The Bidder May Book Bound Or Securely Stapled. B. Any Document Submitted, Not Book-bound And Less Than Three (3) Sets, Shall Be Rejected Outright. C. Envelope 1 And Envelope 2 Shall Be Placed In One Mother Envelope. Please See Bid Data Sheet For Further Instruction. Brand/s Condition Brands Offered Must Conform To The Standard Set By The Therapeutics Committee As Evidenced By Their Certification. The Brand Offer Of The Bidder Must Pass The Evaluation Of The Therapeutics Committee Otherwise The Brand Offer Of The Bidder Will Be Considered Not Responsive. Refer To The Attached Standard Guidelines In Evaluating The Sample Items Of The Bidders Note: Bidder/s Is Allowed To Offer Maximum Of 3 Brands And Strictly No Brand Replacement Pursuant To Bac Resolution No. 786 Dated June 02, 2023 Series Of 2023. Section 34. Process Of Post-qualification (section 34, R.a. 9184) 34.1 The Lowest Calculated Bid/highest Rated Bid Shall Undergo Post-qualification In Order To Determine Whether The Bidder Concerned Complies With And Is Responsive To All The Requirements And Conditions As Specified In The Bidding Documents. Xxx 34.3.b.iii) Verification And/or Inspection And Testing Of The Goods/product, Aftersales And/or Maintenance Capabilities, In Applicable Cases, As Well As Checking The Following: A. Delay In The Partial Delivery Of Goods Amounting To Ten Percent (10%) Of The Contract Price In Its Ongoing Government And Private Contracts; B. If Any Of These Contracts Shows The Bidder’s Failure To Deliver Or Perform Any Or All Of The Goods Or Services Within The Period(s) Specified In The Contract Or Within Any Extension Thereof Granted By The Procuring Entity Pursuant To A Request Made By The Supplier Prior To The Delay, And Such Failure Amounts To At Least Ten Percent (10%) Of The Contract Price; Or C. Unsatisfactory Performance Of The Supplier’s Obligations As Per Contract Terms And Conditions At The Time Of Inspection. If The Bac Verifies Any Of These Deficiencies To Be Due To The Bidder's Fault Or Negligence, The Bac Shall Disqualify The Bidder From The Award, For The Procurement Of Goods. 11. The Provincial Government Of Davao Del Sur Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: The Bac Chairperson Provincial Government Of Davao Del Sur Email: Bac.davaodelsur2@gmail.com Ms. Norjanna M. Camaguin, Mpa Chief Administrative Officer Head, Bac Secretariat Procurement Management Office Room 4 Executive Building, Barangay Matti, Digos City, Davao Del Sur Email Address: Bac.davaodelsur2@gmail.com Mobile Nos. 0905-229-0526 (globe) / 0908-332-2024 (smart) 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.davaodelsur.gov.ph December 28, 2024 Dessamie Buat-sanchez, Cpa, J.d. Provincial Budget Officer Bac Chairperson

Details: Description "republic Of The Philippines Department Of Health Ilocos Sur Medical Center Heroes Bypass Road, Brgy. Parioc Primero, Candon City, Ilocos Sur" Request For Quotation Company Name: Quotation No. 24-11-0086-02 Company Address: Date: January 22, 2025 Please Quote Your Best Price On The Item/s Listed Below, Subject To The General Terms And Conditions. Submit Your Quotation Duly Signed By An Authorized Company Representative Not Later Than January 29, 2025 Until 3:00 Pm Only , Sealed And Enclosed In The Provided Return Envelope To The Procurement Unit Or Via Electronic Mail At Ismc.procurement02 @gmail.com. Quotations Submitted Beyond The Deadline Will No Longer Be Accepted And Are Deemed Disqualified. (sgd) Karla Mae A. Briones, Md, Dpps Bac Chairperson General Terms And Conditions: 1. All Entries Must Be Written Legibly And In Complete Details. Interlineations, Erasures, Or Overwritings Are Only Valid If Signed By An Authorized Company Representative. 2. The Conditions Of The Offer, Other Than What Is Required By This Request For Quotation Must Be Properly Indicated. Otherwise, Ismc Shall Assume That The Offer Automatically Complies With All The Requirements Of This Request For Quotation. 3. Do Not Leave A Section Blank. Write "no Bid" For The Items Not Applicable. 4. Bidders Shall Submit Brochures With Specification/s Of The Product/s Being Offered, If Necessary. 5. "for Drugs, Medicines, Vaccines And Medical Supplies/devices, The Following Documents Must Be Attached Along With This Quotation: (1) Certificate Of Product Registration; (2) Valid License To Operate; (3) Duly Notarized Dealership Agreements, Distributorship Agreements Or Any Notarized Document Authorizing The Bidder To Sell The Product; (4) Batch Notification For Antibiotics Issued By The Food And Drug Administration (fda) To The Marketing Authorization Holder (mah); And, (5) Lot Release Certificate For Vaccines Issued By The Fda To The Mah." 6. Unless Otherwise Indicated, The Evaluation And Award Must Be Made On A Per Item Basis. 7. Contract Must Be Awarded To The Bidder With The Lowest Calculated Responsive Bid (for Goods And Infrastructure) Or, The Highest-rated Offer For Consulting Services). 8. "for New Bidders/suppliers, The Following Documentary Requirements Must Be Submitted Along With This Quotation As Prescribed By ""annex H"" Of The 2016 Revised Irr Of R.a. 9184: (1) Mayor's/business Permit; (2) Professional License/curriculum Vitae (for Consulting Services); (3) Certificate Of Philgeps Registration; (4) Pcab License (for Infra.); (5) Nfcc (for Infra.); And, (6) Income/business Tax Return." 9. Notarized Omnibus Sworn Statement (oss) Is Required For Transactions With Abc Above P50k As Prescribed By "annex H" Of The 2016 Revised Irr Of R.a. 9184. 10. Delivery Without The Presence Of An Authorized Representative Shall Not Be Allowed. Item No. Item Description Uom Qty Abc Brand/model Unit Price Total Price Office Supplies, Equipment, And Furnitures & Fixtures 1 Wireless Bluetooth Speaker 16in Led Wireless Speaker With Free Wireless Microphone Piece 1 3,358.60 3,358.60 3,358.60 3,358.60 2 50" Ultra Hd (uhd) 4k Smart Tv - Free Wall Bracket & Speaker Piece 1 30,380.00 30,380.00 30,380.00 30,380.00 3 Carbon Paper, Long, Black, 10pc/pack Piece 1 63.00 63.00 4 Cartolina, 22.5in X 28.5in, Color: Blue Piece 5 7.00 35.00 5 Cartolina, 22.5in X 28.5in, Color: Green Piece 5 7.00 35.00 6 Cartolina, 22.5in X 28.5in, Color: Orange Piece 5 7.00 35.00 7 Cartolina, 22.5in X 28.5in, Color: Pink Piece 5 7.00 35.00 8 Cartolina, 22.5in X 28.5in, Color: White Piece 10 7.00 70.00 9 Cartolina, 22.5in X 28.5in, Color: Yellow Piece 5 7.00 35.00 10 Cellular Prepaid Load (unli Call And Text) Piece 12 350.00 4,200.00 11 Correction Tape, Atleast 10 Meters Long Piece 10 11.53 115.30 12 Desk Organizer With Mesh File Holder, Paper Letter Tray With 5-tier Racks Shelves, 1 Sliding Drawer And Extra Pen Holder For Office Supplies, Color: Black Piece 2 3,500.00 7,000.00 13 File Tab Divider, Legal, Color: Any Set 5 15.00 75.00 14 Foldable Table, Dimensions: 120cm X 60cm X 75cm, Color: White Piece 1 1,170.00 1,170.00 15 Index Tab, Self Adhesive, 5 Set/box, Assorted Colors Box 2 63.11 126.22 16 Marker, Broad, Black (for Whiteboard) Box 1 473.00 473.00 17 Marker, Broad, Red (for Whiteboard) Box 1 473.00 473.00 18 "metal Steel Rack Boltless, Storage Shelf Metal Adjustable Stainless Rack 70cm X 40cm X 180cm" Piece 2 1,200.00 2,400.00 19 "multipurpose Book Shelf Shelves Rack , 5 Layers: 80cm*30cm*143cm Heavy Duty, Steel/wood Or Any Equivalent" Piece 1 1,500.00 1,500.00 20 Paper, Multicopy,210mmx297,a4 Size Bond Paper,70gsm Box 15 895.60 13,434.00 21 Paper Clip, 33mm,100pc/box Box 5 9.36 46.80 22 Paper Clip, 50mm,100pc/box Box 5 23.92 119.60 23 Paper Cutter, 50cm X 40cm X 8cm, Wooden Cutting, Capacity: 12 Sheets Paper Fastener, Plastic 7cm 50pc/box Paper Fastener, Plastic 7cm 50pc/box Paper Fastener, Plastic 7cm 50pc/box Paper Fastener, Plastic 7cm 50pc/box Paper Fastener, Plastic 7cm 50pc/box Paper Fastener, Plastic 7cm 50pc/box Paper Fastener, Plastic 7cm 50pc/box Paper Fastener, Plastic 7cm 50pc/box Paper Fastener, Plastic 7cm 50pc/box Paper Fastener, Plastic 7cm 50pc/box Paper Fastener, Plastic 7cm 50pc/box Paper Fastener, Plastic 7cm 50pc/box Paper Fastener, Plastic 7cm 50pc/box Paper Fastener, Plastic 7cm 50pc/box Piece 1 1,040.00 1,040.00 1,040.00 1,040.00 24 Paste, Solid. 240g Paste, Solid. 240g Paste, Solid. 240g Paste, Solid. 240g Paste, Solid. 240g Paste, Solid. 240g Paste, Solid. 240g Paste, Solid. 240g Paste, Solid. 240g Paste, Solid. 240g Paste, Solid. 240g Paste, Solid. 240g Paste, Solid. 240g Paste, Solid. 240g Paste, Solid. 240g Piece 5 53.00 53.00 53.00 265.00 25 Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Piece 5 72.80 72.80 72.80 364.00 26 Sticker Paper Matte Glossy Kraft A4 100pcs/pack Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Record Book, 300 Pages Pack 2 84.00 72.80 72.80 168.00 Total Approved Budget For Contract (abc) 67,016.52 Total Offer #ref! For Any Inquiries Regarding This Request For Quotation, Please Call Us At 09538832343 Or Email Us At Ismc.procurement02@gmail.com Delivery Period: 30 Calendar Days Upon Receipt Of Purchase Order/notice To Proceed After Having Carefully Read And Understood Your General Terms And Conditions, I Quote You On The Item/s At Price/s Noted Above. Price Validity: Purchase Request No: 24-11-0197 Dated November 11, 2024 Rbac Resolution No: 001 S. 2024 Small Value Procurement Purpose: For The Creation Of Animal Bite Treatment Center Signature Over Printed Name Of Authorized Company Representative Position/designation Contact No./e-mail Address Rommel G. Gacula Signature Over Printed Name Of Designated Canvasser Date Accomplished

Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through General Fund / Sb No. 2 Cy 2024 , Intend To Apply The Sum Of P 3,381,096.77 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Improvement Of Stairs At Buhanginan Hills (near Girlscout Headquarters), Buhanginan Hills, Brgy. Pala-o, Iligan City With Project No. Cb(b)-24-149 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Improvement Of Stairs At Buhanginan Hills (near Girlscout Headquarters), Buhanginan Hills, Brgy. Pala-o, Iligan City General Requirements •permits And Clearances •facilities For The Engineers •installation Of Project Billboard- 2 Sets •occupational Safety And Health Program •mobilization And Demobilization Removal Of Obstructions •clearing/removal Of Obstruction •uprooting/cutting Of Trees Gravel Fill •100 Mm Thk. Gravel Base For Footings And Zocalo •75 Mm Thk. Gravel Base For Bench, Footing And Plantbox Flooring •50 Mm Thk . Gravel Base For Stair Steps Electrical Works •laying Of The Underground Or Overhead Power Cables Connecting To The Main Power Supply •installation Of Protection System And Outdoor Electrical'panel (nema Enclosure W/ 15at Circuit Breaker) •erection Of Modem-type Outdoor Lamp Posts And Bollards (including Foundations And Anchor Bolts) •complete Wiring Of The Luminaire To The Electrical Supply •installation Of Outdoor Junction Boxes For Protection And Organization •underground Cable Burial Or Concrete-embedding Of Cable For Cable Routing •proper Grounding Of The Lamp Posts,electrical Panel, And Other Metal Parts For Safety •concrete Pouring For Footings, Zocalo,columns, 75 Mm Thk. Concrete Flooring For Plantbox , 50 Mm Thk. Concrete Topping, Bench Footing And Bench, 100 Mm Thk. Concrete Flooring For Landing And Stair Steps With Pebble Topping. •installation Of Formworks And Falseworks For Columns, Bench, Concrete Topping, And Stairs (steps And Landing) •removal Of Formworks And Falseworks Steel Reinforcements And Steel Works •installation Of 12 Mm Ø Dsb For Footings And Columns (bedbars And Vertical Bars) Installation Of 10 Mm Ø Dsb For Column Lateral Ties, Concrete Flooring For Plantbox, Concrete Topping, Bench Footing And Bench, Concrete Flooring For Landing And Stairs •installation Of 50 Mm Ø G.i. Pipe Schd. 40 For Lamp Post •installation Of 50 Mm Ø G.i. Pipe Schd. 40,25 Mm X 25 Mm X 3mm Angle Bar And 50 Mm X 50 Mm Wire Mesh (5mm Thk.) For Railings •installation Of 38 Mm Ø G.i. Pipe Schd. 40 For Bench Fabrication Masonry Works •piling Of 4" Thk. Chb At 800 Mm Height W/ 10mm Ø Dsb For Vertical And Horizontal Bars Sped At 0.60m O.c Bothways For Plantbox Softscape •installation Of Plantboxes With Plants And Frog Grass I. Construction Safety And Health Program (q = 1.00 Lumpsum) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. Ii. Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2"x 2"x 8' Coco Lumber, 2"x 3"x 10' Coco Lumber, 2"x 3"x 14' Coco Lumber, Assorted Sizes C.w Nails. Iii. Mobilization & Demobilization (q = 1.00 Lot) Iv. Facilities For The Engineers (q = 1.00 Lot) Includes True-rms Clamp Meter, 400 A Ac/oc, 600v Ac/oc, Cat Iii 600 V Cat Iv 300 V, Fluke 325; Digital Light Meter, Up To 20,000 Lux, Fluke 941; Non-contact Voltage Tester,90 V Ac To 1000 V Ac, Cat V 1000, Fluke 2ac. V. Removal Of Structures And Obstruction (q = 55.56 Cu.m.) Includes Uprooting/cutting Of Trees. Vi. Earthworks (q = 59.82 Cu.m.) Includes Volume To Be Excavated, V = 39.82 Cu.m.;volume To Be Backfilled, V = 39.82 Cu.m.; Gravel Bedding, 1-1/2"ø, V = 20 Cu.m Vi . Steel Reinforcements & Steel Works (q = 9,083.70 Kgs.) Includes 12 Mm Dia. X 6m Dsb; 10 Mm Dia. X 6m Dsb; #16 G.i Tie Wire; 50 Mm Ø G.i. Pipe Schd. 40; 38 Mm Ø G.i. Pipe Schd. 40; 25.4 Mm Ø G.i. Pipe Schd. 40; 5mm Ø Thk. Wire X 50mm X 50mm Mesh Steel Matting; 25 Mm X 25 Mm X 3mm Thk. Angle Bar; Red Lead Metal Primer, Quick Dry Enamel Paint, Paint Brush; Welding Rod (e-6011). Viii. Concrete Works, Formworks And Scaffoldings (q = 47.04 Cu.m.) Includes Portland Cement, Washed Sand, Washed Gravel, 4' X 8' X 1/4" Thk. Marine Plywood, 2" X 2" X 10' Sized Coco Lumber, Assorted Sized C.w Nails. Ix. Masonry Works (q = 194.40 Sq.m.) Includes 4" X 8” X 16" Chb, Portland Cement, Washed Sand, Pebbles. X. Electrical Works (q = 1.00 Lot) Includes Modern-type Outdoor Lamp W/ Post, 2m Height, W/ High-powered 50w Led Bulb, Daylight; Outdoor Bollard Fixture W/ 20w Led Bulb,ip65; Cu Wire,3.5mm2, Thhn/thwn-2, Stranded; Circuit Breaker,15a,2pole,220v,60hz; Circuit Breaker Enclosure, Nema 1,2p; Secondary Rack W/spool Insulator,2-pole,w/screws; Outdoor Junction Box, Ip65 Weather Water Proof, 80x50 Round/octa, W/ Rubber Gasket & Screws; Upvc Conduit Pipe,1/2"x3m; Electrical Tape,0.16x19x16000 Mm; Solvent Cement 200 Cc; Pvc Conduit Fittings And Connectors. Xi.softscape (q = 30.20 Sq.m.) Includes Softscape (includes Garden Soil (planting Medium), Ornamental Plants ,shrubs , Trees). Approved Budget For The Contract (abc): P 3,381,096.77 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Sixty-seven (167) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1. Issuance Of Bid Documents: December 10, 2024 – January 7, 2025 – 8:00 A.m. At Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. 2. Pre-bid Conference: December 17, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4. Submission Of Bids: January 7, 2025 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 5. Opening Of Bids: January 7, 2025 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City.the Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: December 10, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-149 (ceo-infra)