Manpower Tenders

Details: Description Invitation To Bid For Negotiated Procurement Due To Two-failed Biddings Project Title Project Gamit 2.0 Gaining Access To Meaningful Learning Through Instruction Tools And Equipment Packages Brief Description/ Schools/ /amount 1. Bread And Pastry Production: Abuyog National Hs- 259,851.00 Gatbo National Hs- 259,851.00 2. Cookery : Abuyog National Hs- 702,982.00 Gatbo National Hs- 702,982.00 3. Food And Beverages Services: Abuyog National Hs - 571,245.00 Gatbo National Hs - 571,245.00 4. Local Guiding Services: Sawanga National Hs - 23,090.05 5. Hairdressing : Sorsogon National Hs- 323,170.00 6. Wellness Massage: Sorsogon National Hs - 198,338.00 Total - Php3,612,754.00 Project Identification No. : 001-25-goods-project Gamit 2.0- Tvl/tle Approved Budget For The Contract Three Million Six Hundred Twelve Thousand Seven Hundred Fifty Four Pesos (php3,612,754.00) Mode Of Procurement: Negotiated Procurement – Two-failed Biddings 1. In View Of The Two (2) Failed Biddings Previously Conducted, The Department Of Education, Sorsogon City Division, Through Its Bids And Awards Committee (bac), In Accordance With Section 53.1 Of The 2016 Revised Implementing Rules And Regulations (2016 Rirr) Of Republic Act (ra 1984 Invites Technically, Legally, And Financially Capable Supplier/dealers To Participate In The Negotiated Procurement For The Project Gamit 2.0 Gaining Access To Meaningful Learning Through Instruction Tools And Equipment Packages Under Two Failed Biddings. 2. The Division Of Sorsogon City Requires That The Items Be Delivered Within Thirty (30) Calendar Days From Receipt Of Notice To Proceed (ntp). 3. The Division Of Sorsogon City Will Engage In Negotiations With Three (3) Suppliers Namely: Writeshop Enterprises, Me Rainbow Trading And Amm Trading. 4. The Schedule Of Activities Are As Follows: Activities/ Schedule/venue A) Issuance And Availability Of Negotiation Documents- February 3 To 10, 2025 (9:00 A.m. To 5:00 A.m.) - Division Office, Sorsogon East Central School, Burabod, Sorsogon City B) Conduct Of Pre-bid Conference/negotiation- February 6, 2025 (9:00 A.m.)- Division Office, Sorsogon East Central School, Burabod, Sorsogon City C) Deadline For The Submission Of Negotiation Documents- February 10, 2025 (8:30 A.m.)- Division Office, Sorsogon East Central School, Burabod, Sorsogon City D) Opening Of Negotiation Documents - February 10, 2025 (9:00 A.m.)- Division Office, Sorsogon East Central School, Burabod, Sorsogon City 5. The Three (3) Supplier/bidder May Obtain Further Information From The Bac Secretariat During Office Hours From Monday To Friday At 8:00 A.m. To 5:00 A.m. 6. The Division Of Sorsogon City Waves The Imposition Of Fee For The Negotiation Documents. 7. Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. The Three (3) Suppliers/bidders Shall Be Required To Submit Their Documents In Physical Form On The Stated Address. 9. The Three (3) Suppliers/bidders Shall Submit Three (3) Copies Of The Technical And Financial Components Of Its Bid. All Copies Shall Be Stamped As Certified Copies Of Their Original. 10. Eligibility Documents “class A Documents” Legal Documents (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages);] Or (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Documents. And [c] Mayor’s Or Business Permit Issued By The City Or Municipality Were The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And (d) Tax Clearance Per E.o. No. 398 S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And (i) Original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents (j) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And (k) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents (l) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Financial Component Envelope (m) Original Of Duly Signed And Accomplished Financial Bid Form; And (n) Original Of Duly Signed And Accomplished Price Schedule(s) 11. The Division Of Sorsogon City Reserves The Right To Reject Any And All Bids, Declare A Failure If Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Rirr Of Ra 9184 Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Josephine P. Cochico Head Of Bac Secretariat Josephine.cochico@deped.gov.ph Contact No. : 09301832359 13. You May Visit The Website For Downloading Of Bidding Documents Depedsorsogoncity.com Elena D. Hubilla Cid - Chief Bac Chairman

Details: Description Description Republic Of The Philippines Danao City Bids And Awards Committee Invitation To Apply For Eligibility And To Bid Supply And Delivery Of Construction Materials For Slope Protection Of Landslide Prone Areas At Purok Kamanggahan Barangay Togonon, Danao City Of The City Government Of Danao The Local Government Of Danao City, Through The 20% Economic Development Fund Intends To Apply The Sum Of Php450,867.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Supply And Delivery Of Construction Materials For Slope Protection Of Landslide Prone Areas At Purok Kamanggahan Barangay Togonon, Danao City Of The City Government Of Danao. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening. The City Government Of Danao Now Invites Sealed Bids From Eligible Bidders To Participate In The Public Bidding Construction Materials For Slope Protection Of Landslide Prone Areas At Purok Kamanggahan Barangay Togonon, Danao City, As Follows; Seq. Item Description Quantity 1. Class A Boulder (maximum 10kg) 110 Cu.m 2. 40-kg Portland Cement 390 Bags 3. Mixed Sand 16 Cu.m 4. Fined Sand (for Plastering) 9 Cu.m 5. Filling Materials (limestone) 11 Cu.m 6. 76mm.ø X 3.00mtrs. Pvc Pipe (ordinary) 10 Lengths 7. Hacksaw Blade 10 Pcs 8. River-washed Sand 7 Cu.m 9. River-washed Gravel 14 Cu.m 10. 12mm.ø X 6.0m Deformed Bar 4 Lengths 11. 10mm.ø X 6.0m Deformed Bar 14 Lengths 12. #12 Welding Electrode 6 Kg 13. 4”ø Cutting Disc 5 Pcs 14. 100mm.ø X 6.00mtrs G.i Pipe Sch.-40 6 Lengths 15. Ga-16 X 4’ X 8’ Pre-fab Steel Plate (including Bending) 11 Shts 16. 16mm.ø X 150mm. Machine Bolt With Nut And Washer Full 34 Pairs 17. 10mm.ø X 38mm. Machine Bolt With Nut And Washer 128 Pairs 18. 14”ø Cutting Disc 2 Pcs 19. Epoxy Primer (gray) 4 Gals 20. Reflectorized Rubber Based Paint (yellow) 4 Gals 21. Reflectorized Rubber Based Paint (black) 2 Gals 22. 2” Paint Brush 6 Pcs 23. 3” Paint Brush 6 Pcs 24. Paint Thinner 2 Gals 25. 20mm. X 25m. Masking Tape 2 Rolls 26. Paint Tray 1 Pc Php450,867.00 Delivery Of The Goods Is Ten (10) Days Upon Request/after Receipt Of Notice To Proceed. The Description Of An Eligible Bidders Is One Who Have Submitted The Following Requirements: Eligibility Requirements With Letter Of Intent To Bid To Be Submitted On January 14-20, 2025 At 2:00 P.m. (note: All These Documents Should Be In A Separate Envelope.) 1. Dti Business Name Registration Or Sec Registration 2. Tax Clearance 3. Business Permit 4. Certificate Of Registration – Bir Form 2303 5. Authority Of Signatory (duly Notarized) If (single Proprietorship) / Secretary Certificate –should Be Notarized 6. Omnibus Sworn Statement Duly Notarized 7. Valid Joint Venture Agreement (if Applicable) 8. Articles Of Partnership Of Incorporation (if Applicable) 9. On-going And Awarded Contracts 10. Single Largest Completed Similar Contracts 11. Copies Of End-users Acceptance Letter For Completed Contracts (if Any) 12. Specification Of Whether Or Not The Prospective Bidder Is A Manufacturer, Supplier Of Distributor 13. Audited Financial Statement And Income Tax Return 14. Nfcc Duly Notarized Or Credit Line At Least 10% Of The Abc 15. Philgeps Organization Number 16. Philgeps Certificate 17. Danao City Mayors Permit To Bid Submission And Receipts Of Bids On January 21, 2025 At 1:30 In The Afternoon At The Bids And Awards Committee Office. Technical Envelope: 1.) Bid Security - 2% Cash/cashier's Check/manger's Check/letter Of Credit/bank Draft/guarantee (based On Abc) 5% Gsis Bond (based On The Abc) / Bid Securing Declaration 2.) Authority Of The Signatory Duly Notarized If (single Proprietorship) / Secretary Certificate If Corp. 3.) Production / Delivery Schedule 4.) Manpower Requirements 5.) After-sales/parts, If Applicable. 6.) Technical Specification Of The Products. 7.) Commitment To Extend A Credit Line / Nfcc At Least 10% Of The Abc Duly Notarized. 8.) Omnibus Sworn Statement Duly Notarized Financial Envelope: 1.) Bid Prices In The Bill Of Quantities In The Prescribed Bid Form. 2.) The Recurring And The Maintenance Costs, If Applicable. Instructions To Bidders: 1.) For Winning Bidders, Performance Security Shall Be Required To Guarantee The Faithful Performance Upon Signing The Contracts It Maybe 5% Of The Contract Prices On A Form Of Cash/manager's Check Or 30% Gsis Bond. 2.) Retention In The Amount Equivalent To At Least 10% Of Every Progress Payment Made Or Special Bank Guarantee Equivalent To At Least 10% Of The Total Contract Price. The Said Amount Shall Be Released Only After The Lapse Of The Warranty Period, 3 Months In Case Of Supplies And 1 Year In The Case Of Purchase Of Equipment. 3.) All Particulars Relative To Pre-qualifications, Biddings, Evaluation Of Bids And Awards Of Contracts Shall Be Governed By The Provision Of Ra 9184 And Other Rules Regulation As Maybe Applicable. 4.) The City Government Reserves The Right To Reject Any/or All Bids, To Waive Any Defect, Informalities Therein And To Award To The Bidders Upon Evaluation By The Bids And Awards Committee (bac) The Bid That Are More Advantageous To The City. 5.) 5% Value Added Tax (vat) Withheld Of The Contract Price. 1% Creditable Income Tax Of Contract Price. 6.) Bidders Should Fill-up All Items; Otherwise In Case Their Quotation Is Incomplete They Are Automatically Disqualified. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using As Specified In The Implementing Rules And Regulations Part ! (irr-a) Of Republic Act No. 9184 (r.a. 9184), Otherwise Known As The Government Procurement Reform Act, And Is Restricted To Organization With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belongings To Citizen Of The Philippines, As Specified In Republic Act 5183 (r.a. 5183). Only Bids From Bidders Who Pass The Eligibility Check Will Be Opened. The Process For The Eligibility Check Is Described In Section Ii Of The Bidding Documents, Itb. The Bidder With The Lowest Calculated Bid (lcb) Shall Advance To The Post-qualification Stage In Order To Finally Determine Who’s Responsiveness To The Technical And Financial Requirements Of The Project. The Contract Shall Then Be Awarded To The Lowest Calculated And Responsive Bidder (lcrb) Who Was Determined As Such During The Post-qualification Procedure. Very Truly Yours, Catherine M. Enriquez Bac Secretariat Approved: Evelyn Y. Rezaldo Bac Chairman

Details: Description Request For Quotation Date: January 30, 2025 Rfq No. 2025-mc-62 _____________________________ _____________________________ _____________________________ _____________________________ (company Name & Address) Sir/madam: The Philippine International Convention Center, Inc. (picci), Through Its Bids And Awards Committee, Intends To Procure Supply Of Labor And Materials For The Cleaning Of Cistern Tanks At The Delegation Parking, Powerhouse And Forum, With An Approved Budget For Contract (abc) Of Four Hundred Thousand Pesos (₱400,000.00), Vat Inclusive, Which Will Be Undertaken In Accordance With Section 53.9 Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. Please Quote Your Best Offer For The Service/s Described Herein, Subject To The Terms Of Reference Provided For This Rfq. Submit Your Quotation/offer Duly Signed By You Or Your Duly Authorized Representative Not Later Than 3:00 P.m. Of _february 7, 2025_. A Copy Of The Following Shall Be Submitted Along With Your Quotation/offer: A. 2025 Mayor’s/business Permit; In Case The Mayor’s Permit Is Pending Renewal, Attach Proof Of Renewal I.e. Or/sales Invoice; B. Bir Registration Certificate; C. Philgeps Registration Number; D. Omnibus Sworn Statement; And E. Copy Of The Terms Of Reference Duly Signed On All Pages. Open Quotations May Be Submitted Manually Or Through Email At The Address And Contact Numbers Indicated Below. For Any Clarifications, You May Contact Ms. Carreen M. Mangaya At Telephone No. (02) 8789-4761 Or Email Address At Cmmangaya@picc.gov.ph Kristine Angelica E. Agujo Head, Bac Secretariat/ Procurement Unit Rfq No. 2025-mc-62 Terms Of Reference I. Project Title: Supply Of Labor And Materials For The Cleaning Of Cistern Tanks At The Delegation Parking, Powerhouse And Forum Ii. Approved Budget For Contract (abc): Four Hundred Thousand Pesos (₱ 400,000.00), Vat Inclusive. Iii. General Scope Of Works: The Works Include The Supply Of All Materials, Tools, Labor, Equipment And Other Services Necessary For The Cleaning And Maintenance Of The Delegation, Powerhouse And Forum Cistern Tank. The Following Features Of The Work Shall Be Performed, But Not Limited To The Following: 1.0 General Requirements: 1.1 Mobilization Manpower, Tools, Materials And Equipment. 1.2 Securing Of Surety, Performance And Guarantee Bonds 1.3 Health And Safety Requirements - Personal Protective Equipment (ppe). All Workers Shall Wear Their Company Uniform. - The Contractor Shall Install Two (2) – Safety Signage, Same As The Picc Standard Signage, 22” X 32”, Printed In Sintra Board. Text To Be Provided By Picc. - The Contractor Shall Provide Necessary Safety Equipment Needed Like Exhaust System During Actual Cleaning. 1.4 Demobilization Manpower, Tools, Equipment, Including Hauling-out Of Debris. 2.0 Cleaning Of Cistern Tanks (delegation, Powerhouse And Forum) 2.1 Draining/pumping Of The Tank’s Water Residual Content To A Considerable Level To Facilitate Efficient, Effective And Economical Cleaning System. Draining Should Be Properly Coordinated So That All Water To Be Re-use Or For Watering The Plants. 2.2 Provide Submersible Pumps With Hose, High Pressure Washer, Exhaust Ventilation Units, Ladders And Lights. 2.3 Brushing And Scraping Of Slime, Scales And Other Sedimentary Deposits At The Tanks Bed And Laterals (wall Chambers). 2.4 De-rusting Of Equalizing Pipe, Supply Lines, Domestic Pumps Suction Lines Inside The Tank. Manhole Steel Covers Should Be De-rusted/repainted With Primer And Final Coated With Qde. 2.5 Mixing/stirring Of Water With Loose Dirt/scales And Slime For Siphoning. 2.6 Manual Cleaning Of Left-over Dirt (cannot Be Pumped-out). 2.7 Rinsing The Tanks Inner Walls With Plain Water Using High Pressure Washer (first Stage). 2.8 Rinsing The Tank With Chlorinated Water Of Higher Concentration Than Maynilad To Effect Safe Sanitation On The Tanks Inner Wall Using Higher Pressure Washer. 2.9 Neutralizing The Tanks Chemical Toxity To Safest And Most Acceptable Level By Re-washing Or Further Rinsing With Plain Water. 2.10 Testing And Commissioning. Testing Shall Be Done By Taking Samples Of Water For Testing On Approved Water Testing Laboratories For Bacteriological And Physicochemical Analysis Of Drinking Water. If The Result Of Water Testing Failed, Same Procedure Of Cleaning Shall Be Done Before Testing Is Again Administered. Result Of Water Testing Shall Be Submitted A Week After Refilling The Cistern Tank Or The Soonest Possible Time. 3.0 Repainting Of The Manhole Cover Of The Delegation, Powerhouse And Cistern Tanks With Top Coat Of Elastomeric Paint. 4.0 Repainting Of The Exterior Wall Of The Power House And Forum (including Generator Set And Pressure Tank Room) Cistern Tank. Use Semi-gloss Latex Paint. 5.0 Application Of Sealant For All Manhole Covers. Sealant To Be Used Shall Be Moisture-curing And Elastic Joint Sealant. 6.0 Restoration Of All Affected Areas (perimeter Of Cistern Tanks) 7.0 Cleaning And Hauling Out Of All Garbage. Iv. General Conditions: A. Interpretation 1. The Contract Documents, Specifications And Drawings Are Mutually Complimentary. What Is Noted In One Although Not Shown In Other Shall Be Considered Contained In All, In Case Of Conflict. The Specifications Shall Prevail Over The Drawings. The Documents Forming The Contract Shall Be Interpreted In The Following Order Of Priority: A. Contract/construction Agreement B. Contractor’s Bid C. Special Conditions Of The Contract D. Specifications E. Drawings F. Bill Of Quantities G. Any Other Document Listed In The Special Conditions Of The Contract As Forming Part Of The Contract. 2. The Contractor Shall Examine All The Issued Documents Relating To The Work And Must Have Verified All The Existing Conditions At The Site. No Considerations Will Be Given For Any Alleged Misunderstanding Of Misinterpretations Of The Specifications And Materials To Be Used Or Work To Be Done. 3. All Works Should Be Properly Coordinated With Picc Representative/bsd Project-in-charge. 4. All Cleaning System (excluding Of Water Pumping) Should Be Done Manually And Avoid Too Much Vibration Causing Work Process That Can Be Detrimental Effect To The Concrete Walls And Bed. Furthermore, All Chemicals To Be Used For The Cleaning And Sanitizing Works Should Have Been Tested/proven Safe For Such Application In The Industry, And For Approval Of The Picc Project-in-charge. 5. The Tank Should Be Inspected By The Project-in-charge Or His Authorized Representative To Determine Its Condition And Readiness For The Refilling. The Interior Wall Should Be Thoroughly Cleaned, Sanitized And Well Rinsed Prior To Re-watering Or Refilling. 6. Work Completion Time Should Be Religiously Followed By The Contractor. 7. Cost Of Re-work/restoration On Damage/s Due To Contractor’s Poor Workmanship Or Negligence Should Be Done By The Contractor. 8. The Contractor Should Free Picc From Any Problem, Legal Suit/s Or Whatsoever That May Arise Or Claims Or All Of The Personnel Employed By The Contractor Of The Project. 9. For Suppliers And Contractors With On-going Deliveries Of Projects At The Picc Who Had Incurred Late Deliveries Or Negative Slippage In Their Activities Or Were Rated “unsatisfactory” In Their Previous Performance Are Not Qualified To Join In This Bidding. B. Possession Of Site 1. The Contractor Admits That He Has Inspected The Site Where The Work Will Be Performed; That He Has Informed Himself Fully As To The Conditions Which Might Affect The Nature, Extent And Cost Of The Work Required; That Picc Shall In No Way Be Responsible For Any Additional Costs Or Expenses Which May Develop On Account Of Failure Of The Contractor To Make Accurate Examination Of Present Or Future Factors Attendant To The Execution. 2. Tapping Of Equipment And Other Related Works Shall Be Properly Coordinated With Picc’s Representative For Provision Of Electrical Power. 3. The Picc Shall Designate A Specific Area To Be Used By The Contractor As Temporary Facilities/storage Area/administration Area In Connection With The Project. The Contractor Must Submit Layout Of The Mentioned Temporary Facilities And Must Be Approved By The Picc Management. 4. The Picc Shall Allow The Contractor To Tap From The Existing Electrical Connections To Be Used In The Latter’s Temporary Facilities, For This Purpose, The Picc Shall Install A Sub-meter Which Was Provided By The Contractor For Power Consumptions And Shall Be Billed Accordingly. C. Contractor’s Obligation 1. The Contractor Shall Perform All Works Necessary To Fully Accomplish The Project. 2. A Joint Inspection Must Be Conducted By The Contractor And Picc Representative, On The Specific Works To Be Done For This Project. 3. The Conractor Is Required To Inspect And Examine The Site And The Surroundings Of The Project To Arrive At An Estimate Of The Labor, Materials, Equipment, Facilities And Services Necessary To Carry Out The Works. 4. The Contractor Shall Commence Execution Of The Works On The Start Date And Shall Carry Out The Works In Accordance With The Program Of Work Submitted By The Contractor, As Updated With The Approval Of Picc Representative And Complete Them By The Intended Completion Date. 5. The Contractor Shall Provide All Supervision, Labor, Materials, Plant And Contractor’s Equipment, Which May Be Required. 6. The Contractor Shall Be Liable To All Fire And Accident Claims And Other Related Claims Arising From The Injuries And Damage, Which Occurred In The Vicinity. 7. The Contractor Shall Free The Picc And Its Personnel From And Against All Liability For Damages Arising From Injuries Or Liabilities To Persons Or Damages To Property Occasioned By Any Act Of Omissions Of The Contractor Including Any And All Expenses Which May Be Incurred By Picc And Its Personnel In The Defense Of Any Claim, Action Or Suit. 8. Any Work That May Affect The Operation, Security And Image Of The Center Shall Be Coordinated Properly With Picc Representative And Shall Be Done In Accordance With The Center’s Approved Schedule. 9. Cost Of Rework And Restoration Of Damaged Properties Due To Contractor’s Poor Workmanship Or Negligence Shall Be Borne By The Contractor. 10. The Contractor Must Submit List Of Personnel Assigned To The Project Including Their Nbi Clearances/barangay Clearance Before Commencing The Above Scope Of Works. D. Warranty The Warranty Shall Be One (1) Year Reckoned From The Date Of Final Turn-over And Acceptance. E. Terms Of Payment 1. Full Payment Shall Be Made Upon Completion Of The Project And Will Be Process Upon Submission Of The Following Documents: A. Letter Request Of The Contractor For The Release Of Payment. B. Work Accomplished As Validated And Certified By Picc’s Representative. C. Photographs Of Work Accomplished. D. Invoice E. Bacteriological Analysis And Physicochemical Test. 2. Full Payment Shall Be Subject To Five Percent (5%) Of The Contract Amount As Retention Money. The Total “retention Money” Shall Be Due For Release Upon Final Acceptance Of The Works. 3. The Picc Representative Shall Check The Contractor’s Request For Payment And Certify The Amount To Be Paid To The Contractor As Progress Payments. Materials And Equipment Delivered On The Site But Not Completely Put In Place Shall Not Be Included For Payment. 4. Picc Shall Pay The Contractor The Amounts Certified By Picc’s Representative Within Twenty-eight (28) Calendar Days From The Date The Request For Payment Is Evaluated And Approved. No Payment Interest Shall Be Made For The Delayed Payments And Adjustments. F. Contractor Qualification 1. The Contractor Shall Be Pcab Licensed With A Classification Of General Building, “d” Category With At Least Three (3) Years’ Work Experience In Cleaning Of Cistern Tanks. 2. The Minimum Work Experience Required For Key Personnel: Key Personnel Relevant Experience 1 – Project Engineer License Civil Engineer/ Architect Must Have At Least Three (3) Years’ Experience As Supervisor Of Civil Works. 1 – Full Time Safety Officer Minimum Of Three (3) Years’ Work Experience As Safety Officer/practitioner. Must Have Certificate Of Employment As Safety Officer And Certificate Of Training In Occupational Safety And Health From Dole Or Any Dole Accredited Training Institution. 3. The Minimum Major Equipment Required For The Project Are The Following: Item No. Number Of Units Description Of Equipment 1 2-units 5hp Sump Pump G. Workmanship The Work Throughout Shall Be Executed In The Best And Most Thorough Manner To The Satisfaction Of Picc And Its Engineers And Supervisors Who Will Jointly Interpret The Meaning Of The Scope Of Work And Its Conditions And Shall Have The Power To Reject The Work, Method Of Accomplishing Every Part Of Work And Material Used Which In Their Judgement Are Not In Full Accordance Therewith And Are Disadvantageous To Picc. H. Schedule Of Work Schedule Of Cleaning Shall Be During Holy Week For The Delegation And Powerhouse Cistern Tanks. The Forum Cistern Tank Shall Be Scheduled Just After The Holy Week. Note: Delays Due To Work Stoppage Ordered By Picc Shall Not Be Counted Against The Set Completion Date. I. Liquidated Damages In Case Of Delay In The Completion Period Inclusive Of Duly Granted Time Extensions, If Any, The Contractor Shall Be Liable For Damages And Shall Pay The Picc For Liquidated Damages In An Amount Equivalent To At Least One (1/10) Of One Percent (1%) Of The Cost Of The Unperformed Services For Everyday Of Delay. The Maximum Deduction Shall Be Ten Percent (10%) Of The Amount Of The Contract, The Procuring Entity Shall Rescind The Award Without Prejudice To Other Courses Of Action And Remedies Open To It. V. General Conditions Of The Contract: 1. All Prices Quoted Herein Are Valid, Binding And Effective For One Hundred Twenty (120) Calendar Days From Date Of Quotation. 2. The Contractor Shall Be Responsible For The Source(s) Of His Services/equipment Shall Make Deliveries In Accordance With Schedule, Quality And Specifications. Failure By The Awardee To Comply With The Same Shall Be Ground For Cancellation Of The Award. 3. The Contractor Shall Pick Up Rs And Ntp Issued In His Favor Within Three (3) Days After Receipt Of Notice To That Effect. A Telephone Call, Fax Transmission Or Email Shall Constitute An Official Notice To The Awardee. Thereafter, If The Rs Remain Unclaimed, The Said Rs Shall Be Sent By Messengerial Service To The Awardee At The Latter’s Expense. To Avoid Delay In The Service Of The Requesting Agency’s Requirement, All Defaulting Awardees Shall Be Precluded From Proposing Or Submitting A Substitute Sample. 4. Subject To The Provisions Of The Preceding Paragraph, Where Awardee Has Accepted A Ntp But Fails To Deliver The Services Within The Time Called For In The Same Order, He Shall Be Extended A Maximum Of Fifteen (15) Calendar Days Under Liquidated Damages To Make Good His Services. Thereafter If Awardee Has Not Completed Delivery Of Services Within The Extended Period, The Subject Rs & Ntp Shall Be Cancelled And The Award For The Undelivered Balance Withdrawn From That Awardee. The Picc-bac Shall Then Purchase The Required Services From Such Other Source(s) As It May Determine, With The Difference In Price To Be Charged Against The Defaulting Awardee. Refusal By The Defaulting Awardee To Shoulder The Price Difference Shall Be Ground For His Disqualification From Future Bids Of The Same Or All Items, Without Prejudice To The Imposition Of Other Sanctions As Prescribed Under Ra 9184 And Its Irr-a. 5. All Services By The Contractor Shall Be Subject To Inspection And Acceptance By The Picc. 6. A Penalty Of One Tenth (1/10) Of One Percent (1%) Of The Total Value Of Services/works Shall Be Deducted For Each Day Of Delay Including Sundays And Holidays In The Delivery Of The Services. 7. All Transactions Are Subject To Withholding Of Creditable Value Added Tax (vat) Per Revenue Regulation No. 10-93.

Details: Description Request For Negotiated Procurement Under Two Failed Biddings Supply And Delivery Of 4x4 Pick-up (mt) 1. The Bureau Of Plant Industry (bpi), Through The Quarantine Services Intends To Apply The Sum Of Twelve Million Pesos (php12,000,000.00) Being The Abc To Payments Under The Contract For Supply And Delivery Of 4x4 Pick-up (mt) With Itb Pr No. 3856-24bac. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Procurement Of The Project Will Be Conducted Through Negotiated Procurement (two Failed Biddings), An Alternative Method Of Procurement, In Accordance With Section 53.1 Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. 3. The Bpi Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Forty-five (45) Calendar Days After Receipt Of Notice To Proceed. Bidders Should Have Completed, Within The Last Two (2) Years (from Cy 2023 To Present) From The Date Of Submission And Receipt Of Bids, A Single Contract Or An Aggregate Of Utmost Three Contracts Similar To The Project To Be Bid Equivalent To At Least Twenty-five Percent (25%) Of The Abc. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 5. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before 10:00am On February 11, 2025. Late Bids Shall Not Be Accepted. 6. Bid Opening Shall Be On February 11, 2025, 10:30am At Bac Conference Room, Bureau Of Plant Industry, No. 692 San Andres Street, Malate, Manila. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 7. The Bpi Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 8. Copies Of The Following Eligibility, Technical And Financial Documents Are Also Required To Be Submitted Along With Your Quotation/proposal: I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages); Or In Case Legal Document/s Uploaded On The List Of Eligibility Documents (page 3 Of The Philgeps Registration Certificate) Is Not Updated Or Has Been Expired, Renewed/proof Of Renewal Of The Document Shall Be Attached: (a.1) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document, (a.2) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; (a.3) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (b) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid, With Sum Total; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid With Sum Total, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And • For Letter B & C, The Following Information Shall Be Provided In Matrix Form: I. The Name Of The Contract Ii. Date Of Contract Iii. Kind Of Goods Sold Iv. Amount Of Contract And Value Of Outstanding Contract V. Date Of Delivery Vi. Specification Whether Prospective Bidder Is A Manufacturer, Supplier, Or Distributor • For Letter C, The Following Requirement Shall Be Submitted: I. Notice Of Award/s Of The Similar Completed Contract/s Or Contract Of Agreement Or Notice To Proceed/s Or Purchase Order/s (in Case Of Small Value Procurement Project) Issued By The Owner/s; And Ii. Delivery Receipt Or Collection Receipt Or Official Receipt Or Sales Invoice; ⬜ (d) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (e) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (f) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (g) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (h) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc); Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (i) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful; Ii. Financial Component Envelope ⬜ (a) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ ⬜ ⬜ (b) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) (c) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. (d) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity. Other Requirements: (a) Bids Shall Be Submitted In Two Envelope Systems. First Envelope Containing The Technical Documents (one (1) Original And Two (2) Photocopies); And Second Envelope Containing The Financial Documents (one (1) Original And Two (2) Photocopies). (b) Bid Documents Are Requested To Be Properly Marked And Submitted With Dog Ear Code/tabbing Containing The Prescribed Label (preferably In Capital Letter) For Each Of The Requirements. Note: The Bidder Must Familiarize Himself/herself With Other Bid Requirements Not Otherwise Included Herein Such As, But Not Limited To Those In The Bid Bulletins, Pertinent Guidelines In Gppb Rules And Regulations, Etc. 9. For Further Information, Please Refer To: Ms. Jhoana Grace B. San Gabriel Head, Bac Secretariat Bureau Of Plant Industry No. 692 San Andres Street, Malate, Manila Email Address: Pms@buplant.da.gov.ph Contact No.: 09052575428 10. You May Visit The Following Websites: For Downloading Of Bidding Documents: Http://bpi.da.gov.ph/bpi/index.php February 4, 2025 Sgd. Joan-may R. Tolentino Chairperson, Bids And Awards Committee

Details: Description Please Quote Your Best Offer/proposal For The Items/ Described Below. Supply And Installation Of Dark Tint Film And Frosted Film With Cutting On Glass Panels At The Pshc Dark Tint Film Specifications: • Blocks High Percentage Of Uv Rays And Other Harmful Rays • High Performance Heat Rejection Technology • High Glare-blocking Capacity And Daytime Privacy • Helps Prevent Glass From Shattering In Case Of Accidents • Visible Light Transmission: 5% • Color: Super Black Clear Frost Film Specifications: • Brilliant Visual Frosted Effect • Blocks High Percentage Of Uv Rays And Other Harmful Rays • Machine-cut G-1: 4 Panels, Fixed Glass Window 1200mmw X 2350mmh G-2: 4 Panels, Automatic Sliding Glass Door 1150mmw X 2300mmh Frosted Film With Cutting: Design File Will Be Attached, 4pcs. Beexscitech Logo –500mmw X 300mmh Overall 4pcs. Pshc Logo - 50cm ⌀ Of The Logo Scope Of Work: 1. Mobilization Of Manpower, Tools And Materials To Be Used For The Project. 2. Preparation Of The Working Area. 3. Provision Of The Supervision Of The Project. 4. Preparation Of Glass Walls Before The Installation Of The Tinted Films. 5. Installation Of Tinted Films By Trained Installers And Applicators Using Applicable Methods As Prescribed On The Materials To Be Used. 6. Clearing Of Debris And Any Other Waste In The Workplace. Delivery: 15 Days Upon Receipt Of Po Payment Terms: Send Bill Arrangement Abc: P68,773.58   Sealed Quotation/proposals May Be Delivered To: The Chair, Nast Bids And Awards Committee National Academy Of Science And Technology 3rd Level Science Heritage Building, Dost Compound Bicutan, Taguig City The Deadline For Submission Of Quotation Is On January 27, 2025 At 12:00nn. Ms. Virginia Francia O. Gavica Administrative Officer Iii Nast-bac Secretariat Notes: 1. All Entries Must Be Typewritten And Signed By The Company’s Authorized Representative. 2. Price Validity Shall Be For A Period Of Fifteen (15) Calendar Days. 3. Nast Reserves The Right To Accept Or Reject Any Or All Quotations And To Impose Additional Terms And Conditions It May Deem Proper. 4. Suppliers/contractors Must Submit The Eligibility Requirements Listed Below Together With Their Quotation/proposal. 5. This Is A Negotiated Procurement/small Value Procurement Because The Abc Is Less Than P1,000,000.00.   List Of Eligibility Requirements (to Be Submitted Together With The Quotation) 1. Mayor’s Permit (latest) 2. Certificate Of Philgeps Registration/philgeps Registration Number. 3. Income/business Tax Return. 4. Bir Certificate Of Registration 5. Notarized Omnibus Sworn Statement Omnibus Sworn Statement (revised) [shall Be Submitted With The Bid] ______________________________________________________________________ Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code.   In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. [insert Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Affiant [jurat] [format Shall Be Based On The Latest Rules On Notarial Practice]

Details: Description Description Republic Of The Philippines Danao City Bids And Awards Committee Invitation To Apply For Eligibility And To Bid Supply And Delivery Of Hardware Materials For Installation Of Road Barriers At Barangay Ibo, Danao City Of The City Government Of Danao The Local Government Of Danao City, Through The 20% Economic Development Fund Intends To Apply The Sum Of Php315,174.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Supply And Delivery Of Hardware Materials For Installation Of Road Barriers At Barangay Ibo, Danao City Of The City Government Of Danao. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening. The City Government Of Danao Now Invites Sealed Bids From Eligible Bidders To Participate In The Public Bidding Hardware Materials For Installation Of Road Barriers At Barangay Ibo, Danao City, As Follows; Seq. Item Description Quantity 1. Portland Cement 150 Bags 2. Washed Sand 10 Cu.m 3. Washed Gravel 18 Cu.m 4. 10mmø X 6.0m Deformed Steel Bar 46 Length 5. 12mmø X 6.0m Deformed Steel Bar 87 Length 6. 16mmø X 6.0m Deformed Steel Bar 30 Length 7. G.i. Tie Wire #16 27 Kg 8. 100mm Ø G.i Pipe Post (sch.40) 5 Length 9. Ga #12 Pre-fabricated Steel Plate Crash Barrier 22 Sht 10. 16mmø X 150mm Machine Bolt With Nut And 25 Pcs Washer (half Thread-zinc Coated) 11. 16mmø X 38mm Machine Bolt With Nut And 100 Pcs Washer (half Thread-zinc Coated) 12. 2”x2”x10’ Coco Lumber 100 Length 13. 2”x 3”x 10’ Coco Lumber 60 Length 14. 1/2" Plywood Ordinary 19 Sht 15. 1” Cwn 5 Kg 16. 2” Cwn 5 Kg 17. 3” Cwn 5 Kg 18. Hacksaw Blade 10 Pcs 19. Reflectorized Paint (yellow) 4 Gal 20. Reflectorized Paint (black) 3 Gal 21. Reflectorized Paint (gray) 3 Gal 22. Paint Roller 9” With Tray 4 Pcs 23. Paint Brush 4” 4 Pcs 24. Paint Brush 2” 4 Pcs 25. Masking Tape 3/4 X 25m 20 Roll 26. Old Newspaper 5 Kg 27. Paint Thinner 5 Gal 28. Skim Coat 20kg/bag 10 Bag 29. Lacquer Thinner 3 Gal 30. Epoxy Primer 2 Gal 31. Aluminum Enamel Paint 2 Gal Php315,174.00 Delivery Of The Goods Is Ten (10) Days Upon Request/after Receipt Of Notice To Proceed. The Description Of An Eligible Bidders Is One Who Have Submitted The Following Requirements: Eligibility Requirements With Letter Of Intent To Bid To Be Submitted On January 30-february 05, 2025 At 2:00 P.m. (note: All These Documents Should Be In A Separate Envelope.) 1. Dti Business Name Registration Or Sec Registration 2. Tax Clearance 3. Business Permit 4. Certificate Of Registration – Bir Form 2303 5. Authority Of Signatory (duly Notarized) If (single Proprietorship) / Secretary Certificate –should Be Notarized 6. Omnibus Sworn Statement Duly Notarized 7. Valid Joint Venture Agreement (if Applicable) 8. Articles Of Partnership Of Incorporation (if Applicable) 9. On-going And Awarded Contracts 10. Single Largest Completed Similar Contracts 11. Copies Of End-users Acceptance Letter For Completed Contracts (if Any) 12. Specification Of Whether Or Not The Prospective Bidder Is A Manufacturer, Supplier Of Distributor 13. Audited Financial Statement And Income Tax Return 14. Nfcc Duly Notarized Or Credit Line At Least 10% Of The Abc 15. Philgeps Organization Number 16. Philgeps Certificate 17. Danao City Mayors Permit To Bid Submission And Receipts Of Bids On February 05, 2025 At 1:30 In The Afternoon At The Bids And Awards Committee Office. Technical Envelope: 1.) Bid Security - 2% Cash/cashier's Check/manger's Check/letter Of Credit/bank Draft/guarantee (based On Abc) 5% Gsis Bond (based On The Abc) / Bid Securing Declaration 2.) Authority Of The Signatory Duly Notarized If (single Proprietorship) / Secretary Certificate If Corp. 3.) Production / Delivery Schedule 4.) Manpower Requirements 5.) After-sales/parts, If Applicable. 6.) Technical Specification Of The Products. 7.) Commitment To Extend A Credit Line / Nfcc At Least 10% Of The Abc Duly Notarized. 8.) Omnibus Sworn Statement Duly Notarized Financial Envelope: 1.) Bid Prices In The Bill Of Quantities In The Prescribed Bid Form. 2.) The Recurring And The Maintenance Costs, If Applicable. Instructions To Bidders: 1.) For Winning Bidders, Performance Security Shall Be Required To Guarantee The Faithful Performance Upon Signing The Contracts It Maybe 5% Of The Contract Prices On A Form Of Cash/manager's Check Or 30% Gsis Bond. 2.) Retention In The Amount Equivalent To At Least 10% Of Every Progress Payment Made Or Special Bank Guarantee Equivalent To At Least 10% Of The Total Contract Price. The Said Amount Shall Be Released Only After The Lapse Of The Warranty Period, 3 Months In Case Of Supplies And 1 Year In The Case Of Purchase Of Equipment. 3.) All Particulars Relative To Pre-qualifications, Biddings, Evaluation Of Bids And Awards Of Contracts Shall Be Governed By The Provision Of Ra 9184 And Other Rules Regulation As Maybe Applicable. 4.) The City Government Reserves The Right To Reject Any/or All Bids, To Waive Any Defect, Informalities Therein And To Award To The Bidders Upon Evaluation By The Bids And Awards Committee (bac) The Bid That Are More Advantageous To The City. 5.) 5% Value Added Tax (vat) Withheld Of The Contract Price. 1% Creditable Income Tax Of Contract Price. 6.) Bidders Should Fill-up All Items; Otherwise In Case Their Quotation Is Incomplete They Are Automatically Disqualified. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using As Specified In The Implementing Rules And Regulations Part ! (irr-a) Of Republic Act No. 9184 (r.a. 9184), Otherwise Known As The Government Procurement Reform Act, And Is Restricted To Organization With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belongings To Citizen Of The Philippines, As Specified In Republic Act 5183 (r.a. 5183). Only Bids From Bidders Who Pass The Eligibility Check Will Be Opened. The Process For The Eligibility Check Is Described In Section Ii Of The Bidding Documents, Itb. The Bidder With The Lowest Calculated Bid (lcb) Shall Advance To The Post-qualification Stage In Order To Finally Determine Who’s Responsiveness To The Technical And Financial Requirements Of The Project. The Contract Shall Then Be Awarded To The Lowest Calculated And Responsive Bidder (lcrb) Who Was Determined As Such During The Post-qualification Procedure. Very Truly Yours, Catherine M. Enriquez Bac Secretariat Approved: Evelyn Y. Rezaldo Bac Chairman

Details: Description Description Republic Of The Philippines Danao City Bids And Awards Committee Invitation To Apply For Eligibility And To Bid Supply And Delivery Of Hardware Materials For Improvement Of Waterworks System At Various Barangay, Purok 2 Barangay Baliang, Danao City Of The City Government Of Danao The Local Government Of Danao City, Through The 20% Economic Development Fund Intends To Apply The Sum Of Php859,680.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Supply And Delivery Of Hardware Materials For Improvement Of Waterworks System At Various Barangay, Purok 2 Barangay Baliang, Danao City Of The City Government Of Danao. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening. The City Government Of Danao Now Invites Sealed Bids From Eligible Bidders To Participate In The Public Bidding Hardware Materials For Improvement Of Waterworks System At Various Barangay, Purok 2 Barangay Baliang, Danao City, As Follows; Seq. Item Description Quantity 1. High Density Polyethylene Pipe Sdr 9, 2-1/2”ø 33 Roll 2. Gate Valve Brass, 2-1/2”ø 2 Pcs 3. Galvanized Iron Union Schd. 40, 2-1/2”ø 2 Pcs 4. Galvanized Iron Coupling Schd. 40, 2-1/2”ø 2 Pcs 5. Galvanized Iron Nipple Schd. 40, 2-1/2”x6” 2 Pcs 6. Galvanized Iron Tee Equal Schd. 40, 2-1/2”x6” 3 Pcs 7. Galvanized Iron Male Plug Schd. 40, 2-1/2” 2 Pcs 8. High Density Polyethylene Socket Fusion 2 Pcs Male Adaptor, 2-1/2”ø 9. Teflon Tape ¾” 40 Pcs 10. Galvanized Iron Pipe Sched. 40, 2”ø 2 Length 11. High Density Polyethylene Pipe Sdr, 2”ø 1 Roll 12. High Density Polyethylene Pipe Socket Fusion 10 Pcs Tee Reducer, 2-1/2”x2-1/2”x2” 13. High Density Polyethylene Pipe Socket Fusion 10 Pcs Elbow Metal Threaded Female, 2-1/2”x2” 14. Galvanized Iron Elbow Sched.40,2”ø 10 Pcs 15. Butterfly Valve Cl150, 2”ø 10 Pcs 16. Threaded Flange Cl150, 2”ø 20 Pcs 17. Mild Steel Bolts And Nuts 1/2”x6” 40 Pcs 18. Galvanized Iron Nipple Schd. 40, 2”x6” 10 Pcs 19. Galvanized Iron Tee Equal Schd. 40,2”ø 10 Pcs 20. Galvanized Iron Male Plug Schd. 40, 2”ø 20 Pcs 21. Epoxy Paint (blue) 2 Gal 22. Paint Thinner 1 Gal 23. Paint Brush 4” 2 Pcs 24. 40kg Portland Cement 2 Bags 25. Washed Sand 4 Sacks 26. Washed Gravel 6 Sacks Php859,680.00 Delivery Of The Goods Is Ten (10) Days Upon Request/after Receipt Of Notice To Proceed. The Description Of An Eligible Bidders Is One Who Have Submitted The Following Requirements: Eligibility Requirements With Letter Of Intent To Bid To Be Submitted On February 12-17, 2025 At 2:00 P.m. (note: All These Documents Should Be In A Separate Envelope.) 1. Dti Business Name Registration Or Sec Registration 2. Tax Clearance 3. Business Permit 4. Certificate Of Registration – Bir Form 2303 5. Authority Of Signatory (duly Notarized) If (single Proprietorship) / Secretary Certificate –should Be Notarized 6. Omnibus Sworn Statement Duly Notarized 7. Valid Joint Venture Agreement (if Applicable) 8. Articles Of Partnership Of Incorporation (if Applicable) 9. On-going And Awarded Contracts 10. Single Largest Completed Similar Contracts 11. Copies Of End-users Acceptance Letter For Completed Contracts (if Any) 12. Specification Of Whether Or Not The Prospective Bidder Is A Manufacturer, Supplier Of Distributor 13. Audited Financial Statement And Income Tax Return 14. Nfcc Duly Notarized Or Credit Line At Least 10% Of The Abc 15. Philgeps Organization Number 16. Philgeps Certificate 17. Danao City Mayors Permit To Bid Submission And Receipts Of Bids On February 18, 2025 At 1:30 In The Afternoon At The Bids And Awards Committee Office. Technical Envelope: 1.) Bid Security - 2% Cash/cashier's Check/manger's Check/letter Of Credit/bank Draft/guarantee (based On Abc) 5% Gsis Bond (based On The Abc) / Bid Securing Declaration 2.) Authority Of The Signatory Duly Notarized If (single Proprietorship) / Secretary Certificate If Corp. 3.) Production / Delivery Schedule 4.) Manpower Requirements 5.) After-sales/parts, If Applicable. 6.) Technical Specification Of The Products. 7.) Commitment To Extend A Credit Line / Nfcc At Least 10% Of The Abc Duly Notarized. 8.) Omnibus Sworn Statement Duly Notarized Financial Envelope: 1.) Bid Prices In The Bill Of Quantities In The Prescribed Bid Form. 2.) The Recurring And The Maintenance Costs, If Applicable. Instructions To Bidders: 1.) For Winning Bidders, Performance Security Shall Be Required To Guarantee The Faithful Performance Upon Signing The Contracts It Maybe 5% Of The Contract Prices On A Form Of Cash/manager's Check Or 30% Gsis Bond. 2.) Retention In The Amount Equivalent To At Least 10% Of Every Progress Payment Made Or Special Bank Guarantee Equivalent To At Least 10% Of The Total Contract Price. The Said Amount Shall Be Released Only After The Lapse Of The Warranty Period, 3 Months In Case Of Supplies And 1 Year In The Case Of Purchase Of Equipment. 3.) All Particulars Relative To Pre-qualifications, Biddings, Evaluation Of Bids And Awards Of Contracts Shall Be Governed By The Provision Of Ra 9184 And Other Rules Regulation As Maybe Applicable. 4.) The City Government Reserves The Right To Reject Any/or All Bids, To Waive Any Defect, Informalities Therein And To Award To The Bidders Upon Evaluation By The Bids And Awards Committee (bac) The Bid That Are More Advantageous To The City. 5.) 5% Value Added Tax (vat) Withheld Of The Contract Price. 1% Creditable Income Tax Of Contract Price. 6.) Bidders Should Fill-up All Items; Otherwise In Case Their Quotation Is Incomplete They Are Automatically Disqualified. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using As Specified In The Implementing Rules And Regulations Part ! (irr-a) Of Republic Act No. 9184 (r.a. 9184), Otherwise Known As The Government Procurement Reform Act, And Is Restricted To Organization With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belongings To Citizen Of The Philippines, As Specified In Republic Act 5183 (r.a. 5183). Only Bids From Bidders Who Pass The Eligibility Check Will Be Opened. The Process For The Eligibility Check Is Described In Section Ii Of The Bidding Documents, Itb. The Bidder With The Lowest Calculated Bid (lcb) Shall Advance To The Post-qualification Stage In Order To Finally Determine Who’s Responsiveness To The Technical And Financial Requirements Of The Project. The Contract Shall Then Be Awarded To The Lowest Calculated And Responsive Bidder (lcrb) Who Was Determined As Such During The Post-qualification Procedure. Very Truly Yours, Catherine M. Enriquez Bac Secretariat Approved: Evelyn Y. Rezaldo Bac Chairman

Details: Description 1. The Municipal Government Of El Nido, Through The Cy 2024 General Fund - Continuing Intends To Apply The Sum Of One Million Five Hundred Thousand Pesos (₱ 1,500,000.00) Being The Abc To Payments Under The Contract For Negotiated Procurement For Supply And Delivery Of Pick-up For Patrol Operation/2024-10-0902. Bids Received In Excess Of The Abc And Cost Per Unit/item Shall Be Automatically Rejected At Bid Opening. 2. The Municipal Government Of El Nido Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Sixty (60) Days. Bidders Should Have Completed, Within One (1) Year From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Negotiation Will Be Conducted Through Negotiated Procurement Procedures In Accordance With Section 53.1 Negotiated Procurement Two Failed Biddings As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, Including Annex H Thereof. The Bac Will Engage In Negotiations With At Least Three (3) Suppliers To Ensure Effective Competition. The Selection Of The Successful Offer Shall Be Based On The Best And Final Offer That Will Be Submitted On The Specified Date Shown Below, And Which Would Meet The Minimum Technical Specifications Required. 4. Prospective Bidders May Obtain Further Information From Bac Secretariat And Inspect The Negotiation Documents At The Address Given Below From January 21 To February 06, 2025 During Monday To Friday, 8:00 Am To 5:00 Pm. 5. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before 9:00 Am, February 10, 2025. Late Bids Shall Not Be Accepted. Interested Bidders Shall Submit The Documents Based On The Checklist Below In Sealed Envelopes, Labeled As “negotiated Documents”, With The Title Of The Procurement Project, Name Of The Bidder, Address Of The Bidder, And Contact Details Of The Bidder, Addressed To The Undersigned. Each Bidder Shall Submit One (1) Original And Two (2) Readable Copies Of The First (technical) And Second (financial) Components Of Its Bid. Documents To Be Submitted Shall Be Properly Ring Bound, Tabbed, And Labeled. Checklist Of Technical And Financial Documents Instructions: Documents Must Be Printed In Legal Size (8.5” X 13”) Paper And Arranged According To This Checklist. Technical And Financial Documents Should Be Ring-bound And Properly Labeled Or Tabbed According To The Document Name For Ease Of Identification. Bidders Shall Submit Their Bids Through Their Duly Authorized Representative Using The Forms Specified In The Bidding Documents In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously. The First Shall Contain The Technical Component Of The Bid, And The Second Shall Contain The Financial Component Of The Bid. I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ 1. Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; Technical Documents ⬜ 2. Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ 3. Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ 4. Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ 5. Conformity With The Technical Specifications With Identification Of Brands Offered, Including The Following: 5.1 Conformity With Production/delivery Schedule 5.2 Conformity With Manpower Requirements 5.3 Organizational Chart 5.4 After-sales/parts (warranty Certification) ⬜ 6. Original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, 6.1 Original Notarized Secretary’s Certificate (specific For This Project) In Case Of A Corporation, Partnership, Or Cooperative; Or 6.2 Original Special Power Of Attorney (specific For This Project) Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder; Or 6.3 Original Special Power Of Attorney (specific For This Project) Of The Owner For Sole Proprietorship Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ 11. The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ 12. If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope Note: For Consolidated Procurement, The Price Per Unit Of The Goods Shall Be Quoted Not Exceeding The Abc And/or Cost Per Unit As Stated/published In The Invitation To Bid. ⬜ 13. Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ 14. Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ 15. [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ 16. Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity. 6. The Schedule Of Negotiation Activities Is Stated Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. Activities Schedule Venue Issuance And Availability Of Negotiation Documents January 21 To February 06, 2025 Bac Secretariat Office Conduct Of Negotiation February 07 At 9:30 Pm To 5:00 Pm Bac Secretariat Office Deadline For The Submission Of Quotation/proposal February 10, 2025 At 9:00 Am 3rd Floor, Mayor’s Conference Room, New Municipal Hall, Opening Of Quotation/proposal February 10, 2024 At 9:30 Pm To 5:00 Pm 3rd Floor, Mayor’s Conference Room, New Municipal Hall, 7. Bidders Shall Provide Correct And Accurate Information Required In The Attached Forms. Price Quotation/s Must Be Valid For A Period Of One Hundred Twenty (120) Calendar Days From The Date Of Submission Of Quotation. 8. The Municipal Government Of El Nido Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 9. For Further Information, Please Refer To: Office Of The Bids And Awards Committee 2nd Floor, Old Municipal Building Bgy. Maligaya, El Nido, Palawan Contact No.: 0920-954-8810 Email Address: Bacsecretariat@mgoelnido.onmicrosoft.com Issued This 21st Day Of January 2025. (signed) Engr. Raul B. Maximo Bac Chairperson

Details: Description I. Purpose/objectives: The Department Of Tourism (dot) – Region V Is In Need Of The Services Of A Booth Contractor To Design/set-up/install As Well As Maintain, And Dismantle The Bicol Booth For The 32nd Ptaa Travel Tour Expo 2025, With The Following Eligibility: A. The Company Must Be The Official Booth Contractor Of The 32nd Ptaa Travel Tour Expo 2025, Or If Not, The Same Must Shoulder The Management And Other Required Fees Set By The Ptaa Travel Tour Expo Organizer/s (if Applicable). B. The Company Must Be Able To Collaborate, Coordinate And Cooperate With The Dot-region V Team/representatives For Inputs In The Concept, Design, Set- Up/installation And Dismantling Of The Exciting Bicol Booths. C. The Company Must Have The Capability To Invest-in, Purchase, Or Rent (and Coordinate Its Delivery To The 32nd Ptaa Travel Tour Expo Venue When Needed) Furniture, Lightings, And Other Accent Pieces Needed To Complete The Bicol Experience Through Its Booth Design. D. Company Must Have At Least Three (3) Years Of Experience In Booth Fabrication For Exhibits And Fairs The Setup Of The Aforementioned Booth Aims To Attain The Following Objectives: A. Generate Positive "name Recall" Of Bicol And Promote Its Tourist Destinations, Highlighting Nature And Cultural Tourism; B. Create An Atmosphere That Highlights The Country's "love The Philippines” New Branding And The “exciting Bicol” Regional Brand; C. Attract And Encourage Consumer, Press, And Travel Guests To Visit The Bicol Booth; D. Provide A Functional Yet Visually Appealing Area For Provision Of Bicol Tourism Information, Product Updates, And/or Audio-visual Presentations. Ii. Scope Of Services: The Philippine Department Of Tourism Region V Requires A Package Of Services Of A Booth Contractor, For The Following: 1. Provision Of Three (3) Mock Up Design For The Booth (final Design To Be Approved By Dot Region V) 2. Set-up/installation And Implementation Of The Design Including Its Maintenance During The 3-day B2c Activities, And Dismantling Of The Exciting Bicol Booths During Egress. The Design Must: • Design Of The Booth Must Be Aligned With The Theme, “beyond Borders” And Must Be Within The New Trends Of Booth Designs • Speak Up The Destination’s Attraction, Effectively Promoting Bicol’s Tourist Destination, Attractions And Activities • Maintain 75% Visibility On All Sides • Strictly Follow The Rules And Regulations Set By The Event Organizers • Be Approved By Dot Region V And The Ptaa Travel Tour Expo Organizer/s. 3. Incorporate In The Design The Following: • Bicol-inspired Lounge With Coffee Break Area • Storage For Brochures And Other Tourism Collaterals/giveaways/merch And Personal Belongings With Locks (to Be Incorporated In The Counter/tables) • Tables/counter For The Co-exhibitors • Space For The Ice Cream Cart And Freezer Of 1st Colonial Grill • Space For Alden Therese Wine (h 41” X W 17” Top 7” Flat Top) • Six (6) Spaces For Co-exhibitors (1 Meter Each) (if You Will Integrate Separate Tables For Each Exhibitor, However If Long Counter Will Be Used No Need For Spaces) 4. Provide The Following Booth Elements: • One (1) Long Counter With Cabinet And Lock / Seven (7) Tables With Cabinet And Lock • Eighteen (18) High Chairs For The Exhibitors  Chairs Must Complement The Overall Look Of The Pavilion Including The Tables • One (1) Cubicle To Conceal The Freezer  Photo/design/text For The Flat Panel Will Be Provided By Dot V  Dimension Of The Freezer Will Be Provided By Dot • One (1) Sala Set With Center Table • One (1) Tv (55-75 Inches) • 3d Texts Of “#excitingbicol,” “love The Philippines” (photo/design Will Be Provided By Dot V) (to Be Installed On Walls/associated In The Overall Design Of The Booth) • Six (6) Brochure Racks (color/design Should Match/complement The Info Counters And High Chairs) • Oak Wood-colored (or Any Similar Color) Carpeted Flooring • Other Accents/decors Of Indigenous/native Materials/design With Bicol Touch, As Well As Green/fresh Plants, If Applicable Only • Flowers As Center Piece In The Lounge Area And Info Counters • Coffee Area With Coffee Maker • Water Dispenser With Supply Of Drinking And Hot Water For 3 Days From February 7-9, 2025 (water Dispenser Must Be Concealed) • Appropriate Lightings And Ample Supply Of Electricity, Extension Power Outlets For The Duration Of The Event, Taking Into Consideration The Electricity Requirements Of The Freezer For The Sili Ice Cream; • Overnight Electricity Starting February 6 Until February 9, 2025 For The Freezer/sili Ice Cream • Other Accessories Deemed Appropriate, If Applicable 5. Provide The Following Supplies Needed In The Booth Including: • Three (3) White Boards (note: 1 Board Per Day) Size: 60cm X 40cm • Supply Of Assorted 3 N 1 Coffee Including Sugar Free, Biscuits/cookies, Candies, Nuts, Etc. With Disposable/paper Cups, Stirrer, Containers For The “pica-pica” And Tissue Papers For 3 Days From Feb.7-9, 2025. • Eight (8) Pieces Of 300ml 70% Solution Alcohol Spray • Garbage Bag (black) For 3 Days • At Least Five (5) Waste Bins • Craft Materials Such As: Scissors, Stapler, Packaging Tapes, Masking Tapes, And Ball Pens 6. Securing Of Necessary Permits And Payment Of Management Fee And Other Related Fees/surcharges That May Be Incurred As Set By The Ptaa Tte If Applicable. 7. Strict Adherence To The Timeline To Ensure Timely Completion, Good Quality And Use Of The Required/desired Materials, So As To Avoid Overtime Fee If Any. Overtime Fee Shall Be Shouldered By The Supplier. 8. Completion Of Booth, Delivery And Turn-over To Dot Region V Not Later Than 5:00pm Of February 6, 2025 To Give Ample Time For The Ingress/arrangements/set-up Of The Exhibitor And Co-exhibitors’ Tourism Collaterals, Brochures, And Other Products At The Booth. 9. Ensure Timely Delivery/transport Of Goods And Materials From And To Supplier Storage To The Venues. 10. Ensure That The Materials Used Are Of Good Quality. 11. Ensure That Electrical Wiring And Connections In The Bicol Booths Are Concealed And Safe, And That There Is Sufficient Power Supply As Required. 12. Dispose And Dismantle Booths/parts During Egress And/or On The Dates Designated By The Event Organizer/s. 13. All Materials Used For The Booth Design May Be Considered As Waste Materials After The Event, Except For Those Which Can Still Be Reused Or Recycled; These Shall Be Turned Over To Dot-region V. 14. Provision Of Photo Documentation Specially During Ingress. 15. Provision Of Necessary Manpower Supply And Support In The Implementation Of The Project To Ensure That Delivery Is Met As Required; Moreover, Delivery Shall Not Exceed The Given Time-frame By The Organizer. 16. Provision Of Other Pertinent Inclusions Deemed Necessary By Both Parties To Improve The General Look And Function Of The Stand And Other Logistical Services As Needed. Iii. Others Dot-region V Gives Utmost Consideration Of And Importance To The Overall Aesthetic Beauty/design And Functionality Of The Booth In The Award Of Contract. Documents For Submission: 1. Duly Accomplished Rfq 2. Proposed Booth Layout Design • Three (3) Mock Up Designs (final Design To Be Approved By Dot Region V) 3. Company Profile 4. Philgeps Certificate/membership 5. List Of Large Scale Local/ International Events Serviced In The Past Three (3) Years 6. Sec/dti Certificates Or Its Equivalent 7. Mayor’s/business Permit/certification Or Its Equivalent 8. Latest Income/ Business Tax Return 9. Tin Certificate/registration Or Its Equivalent 10. Tax Clearance Certificate 11. Omnibus Sworn Statement (revised)

Details: Description Please Quote Your Best Offer/proposal For The Items/ Described Below. Supply And Installation Of Dark Tint Film And Frosted Film With Cutting On Glass Panels At The Pshc Phase Dark Tint Film Specifications: • Blocks High Percentage Of Uv Rays And Other Harmful Rays • High Performance Heat Rejection Technology • High Glare-blocking Capacity And Daytime Privacy • Helps Prevent Glass From Shattering In Case Of Acciddents • Visible Light Transmission: 5% • Color: Super Black Clear Frost Film Specifications: • Brilliant Visual Frosted Effect • Blocks High Percentage Of Uv Rays And Other Harmful Rays • Machine-cut G-1: 4 Panels, Fixed Glass Window 1200mmw X 2350mmh G-2: 4 Panels, Automatic Sliding Glass Door 1150mmw X 2300mmh Frosted Film With Cutting: Design File Will Be Attached, 4pcs. Beexscitech Logo –500mmw X 300mmh Overall 4pcs. Pshc Logo - 50cm ⌀ Of The Logo Scope Of Work: 1. Mobilization Of Manpower, Tools And Materials To Be Used For The Project. 2. Preparation Of The Working Area. 3. Provision Of The Supervision Of The Project. 4. Preparation Of Glass Walls Before The Installation Of The Tinted Films. 5. Installation Of Tinted Films By Trained Installers And Applicators Using Applicable Methods As Prescribed On The Materials To Be Used. 6. Clearing Of Debris And Any Other Waste In The Workplace. Delivery: 15 Days Upon Receipt Of Po Payment Terms: Send Bill Arrangement Abc: P68,773.58   Sealed Quotation/proposals May Be Delivered To: The Chair, Nast Bids And Awards Committee National Academy Of Science And Technology 3rd Level Science Heritage Building, Dost Compound Bicutan, Taguig City The Deadline For Submission Of Quotation Is On January 20, 2025 At 12:00nn. Ms. Virginia Francia O. Gavica Administrative Officer Iii Nast-bac Secretariat Notes: 1. All Entries Must Be Typewritten And Signed By The Company’s Authorized Representative. 2. Price Validity Shall Be For A Period Of Fifteen (15) Calendar Days. 3. Nast Reserves The Right To Accept Or Reject Any Or All Quotations And To Impose Additional Terms And Conditions It May Deem Proper. 4. Suppliers/contractors Must Submit The Eligibility Requirements Listed Below Together With Their Quotation/proposal. 5. This Is A Negotiated Procurement/small Value Procurement Because The Abc Is Less Than P1,000,000.00.   List Of Eligibility Requirements (to Be Submitted Together With The Quotation) 1. Mayor’s Permit (latest) 2. Certificate Of Philgeps Registration/philgeps Registration Number. 3. Income/business Tax Return. 4. Bir Certificate Of Registration 5. Notarized Omnibus Sworn Statement Omnibus Sworn Statement (revised) [shall Be Submitted With The Bid] ______________________________________________________________________ Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code.   In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. [insert Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Affiant [jurat] [format Shall Be Based On The Latest Rules On Notarial Practice]