Interior Tenders

Details: Type and scope of the work Lot 1 Lot 1 - shell construction / plastering Approx. 168 m construction fence Approx. 476 m² construction site access Brc Approx. 440 m² facade scaffolding Approx. 180 m² interior scaffolding Approx. 500 m² topsoil removal Approx. 70 m³ excavation and foundation excavation and backfilling Approx. 205 m³ pipe trench excavation Approx. 115 m kg-pipe DN 100/110 Approx. 378 m² blinding layer C 12/15 Approx. 25 m³ strip foundations / frost protection aprons C 25/30 Approx. 247 m² base plate C 25/30 Approx. 60 m² base plate C 30/37 Approx. 190 m ring anchor / ring beam C 25/30 Approx. 75 m² fully assembled ceiling 20 Cm Approx. 247 M² reinforced concrete filigree ceiling 20 Cm Approx. 7 To structural steel Approx. 170 M² formwork foundations / frost protection aprons Approx. 190 M ring anchor, ring beam and ceiling edge formwork Approx. 275 M² external wall masonry aerated concrete 42.5 Cm Approx. 34 M² parapet masonry aerated concrete 30 Cm Approx. 150 M² internal wall masonry aerated concrete 24 Cm Approx. 320 M² sealing floor slabs Pye G200 Dd Approx. 308 M² external plaster base plaster P II/CS II Approx. 308 M² external plaster top plaster Approx. 60 M² base plaster LW, CS III Approx. 700 M² KZ plaster, 2-layer, Q3

Details: Description Procurement Of Inclusive Learning Resource Centers Assistive Devices, Equipment, Supplies And Materials (lot 10- Arts And Crafts Support Service Area: Skills Development) 1. The Deped Schools Division Of Eastern Samar, Through The General Appropriation Act Of 2024 Intends To Apply The Sum Of ₱ 597,951.44 Being The Abc To Payments Under The Contract For Procurement Of Inclusive Learning Resource Centers Assistive Devices, Equipment, Supplies And Materials (lot 10- Arts And Crafts Support Service Area: Skills Development) Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Deped Schools Division Of Eastern Samar Now Invites Bids For The Above Procurement Project. Bidders Should Have Completed, Within 5 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 4. Prospective Bidders May Obtain Further Information From Deped Schools Division Office Of Eastern Samar And Inspect The Bidding Documents At The Address Given Below During Monday-friday, 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Php 1,000.00. It May Also Be Downloaded From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Nonrefundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Deped Schools Division Of Eastern Samar Will Hold A Pre-bid Conference On February 11, 2025, 10:00am At The Bac Office, Deped Schools Division Of Eastern Samar Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before February 24, 2025, 9:00am Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On February 24, 2025, 10:00am At The Given Address Below Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Only The Proprietor Or Authorized Representative May Be Allowed To Purchase Bidding Documents. Letter Of Intent (loi), Special Power Of Attorney (spa) (for Authorized Representative), And Drl (document Request List From Philgeps) Are Required Upon Purchase. 11. The Deped Schools Division Of Eastern Samar Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Items, Specifications, Quantity Of Delivery, And Abc: Sewing Machine, Automatic Bobbin Winder, Variable Stitch Length Control, Forward And Reverse Function, Numbered Dial Tension, Threadle Or Motor Options, Drop Feed Knob 5 Piece Utility Shelf, Utility Shelf 2 Pieces Table, Folding Table Ft-02 1200mm L X 400mm D X 750mm Ht., Structure: Melamine 3 Pieces Chairs, Cod Armchair Backrest Wood Horn Chair, 43x48x74, Material: High Quality Iron Wood, Max:150kg 6 Pieces Storage Cabinet, Dimension: 48*30*83cm, Material: Plastic, 3 Pieces Cork Bulletin Board, Wooden Frame, 30x40cm 1 Piece Glue Gun, 40w, 100-240v, Hot Melt Glue Gun 2 Pieces Acrylic Color, 12ml, 12 Colors 3 Pieces Scissors, Scissors, 16cm 4 Pieces Cutters, Wallpaper Blade Cutter, Length 15cm, Width: 15cm 3 Pieces Watercolors, 16 Watercolor Set 3 Sets Art Paper (multiple Colors), Colors Assorted Colored Paper, 250 Sheets, 80 Gsm, Size: 8.5" X 11" 3 Reams Paint Brushes, Brush Set 3 Pieces Yarn, Color, 100% Cotton Yarnfor Crochet, Knitting And Yarn Crafts, Thickness: Light (8 Ply), Weight: 20 Grams, Length:43 Meters 10 Pieces Glue, White 225 Grams 5 Pieces Colored Pencils, Colored Pencil 136 C36 Luna Permanent 36 Colors 3 Sets Colored Pens, Coloring Pen, 12 Colors 3 Sets Sewing Pins, 40 Pieces 3 Pieces Sewing Needles, 16 Pcs Set Hand Sewing Needle, Size: S: 4cm (8pcs), M:4.5cm (6pcs)* L:5cm (2pcs), Mateial;stainless 10 Pieces Rotary Cutter, 45mm Fabric Rotary Cutter, Length:45m, Material:stainless Steel Blade+abs Handle, Color: Orange. Length: 165mm, Blade Diameter:45mm, Suitable For:leather Fabric Vinl Fiber Paper 2 Pieces Tape Measure, Measuring Tape 150cm/60 Inches (1.5m*7mm) 10 Pieces Crochet Hooks, 100pcs Crochet Hook Set,perfect Round Point, Material: Plastic+metal, Size:18*13*3cm, Hook Size: 2mm,2.5mm,3.0mm,3.5mm,4.0mm,4.5mm,5.00mm,5.5mm,6.0mm,6.5mm 2 Pieces Knitting Needles, Sizes: 4,5,6 And 8 2 Pieces Crochet Thread, 5 Ply 100% Mercerized Cotton, Assorted Colors, Length:105 Meters, 50 Grams 20 Pieces Sewing Thread, Spun Polyester Sewing Thread, Assorted Colors, 100 Meters, Polyester Material, 10pcs/box 2 Boxes Convertible Drawing And Drafting Table, Size: 24”x36” ▪color:raw Sienna / Brown ▪weight: 10-11kg 1 Piece Studio/painting Easel, Sizes: 85" - 120" Tall 2 Pieces Table/desk Painting Easel, Could Be An H Or An A Easel Type, For A Easel 38" To 75", For H Easel 84" To 96" 5 Pieces Manual And/or Electric Pencil Sharpener, Pencil Sharpener Hand Crank Manual Mechanical Pencil Sharpener,aluminum Alloy Knife Structure,cutting Outer Diameter Of 6.5-8mm Pencil 4 Pieces Wooden Mannequin, With Stand 11.5/14/21/30cm Wooden Human Mannequin Model Artist Movable Limbs Doll 2 Pieces Transparent Edge T-square, Hardwood Blade Dimensions: 30x13.5x0.2 Inches Weight: 14.4 Ounces Color: Wood Size: 36’’ 2 Pieces Carpentry Tools, Tool Set Includes: 1 – 9” Plastic Torpedo Level 1- Magnetic Bit Holder 1” Cr-v Bits Nut Drivers: 3/16”,1/4”,9/32”,5/16”, 11/32”,3/8” 10ft/3m Tape Measure 150mm Mini Saw 7” Locking Pliers 7-12” Diagonal Cutting Pliers 8” Long Nose Pliers 8” Adjustable Wrench 8” Water Pump Pliers Zinc-alloy Utility Knife Utility Knife Blade Black Cable Ties 160oz Claw Hammer Combination Wrench: ¼”, 5/16”, 3/8”, 7/16”. ½”, 9/16” Precision Screwdrivers:ph1, Ph0, Slotted:1/4, 2.0, 2.4, 3.0mm Metric Hex Keys: 1.5, 2, 2.5, 3, 4,5,5.5, 6mm Sae Hex Keys: 1/16”, 5/65”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, ¼” 16” Zipper Tool Bag Item Weight; 8.8 Pounds 17.7x9x9 Inches 2 Sets T50 Staple Gun, Size: 7x9x3 Inches 5/16” Staples 3 Pieces Slop Sink, Size: 30.2x18.4x10.0inch Color: 30”m Style: Single Bowl Material: Stainless Steel Thickness: 3.0-1.2mm 1 Piece Roofing Square Dual Marking Right Angle Picture Framing Carpenter Ruler, Steel 90 Degrees Roofing Square Measuring Size: 20x 30cm/8x12” Rustproof Size: 30x20.5x 20.5 Weight: 0.16kg 3 Pieces Professional Compound Mitre Box & Saw, Adjustable Angle 20x8x9 Inches Miter Box 22 Inches Back Saw 2 Pieces Drawing Lamp, Overall Dimensions: 1.5 “w X 3.5 “d X 29.5 “h Long, Bendable Neck 21” (53 Cm) 28 Led Bulbs Stainless Steel Wattage: 1 Can Be Mounted To Table, Desk Or Easel Usb Plug 2 Pieces Artists Taboret Made Of Beechwood. Measures 35-1/2"h X 17-1/2"w X 14-1/2"d 1 Piece Open Shelves Utility Rack, 72" Height X 48" Width X 18" Depth Five Adjustable Shelves 4,000 Lb. Capacity Steel Frame Particle Board For Shelves Rivet Lock Design With Nuts And Bolts 2 Pieces Chisel Rack For Wood Carving, 3/4″ Thick, And 2 Pieces 3/8″ Tall Plywood Number Of Slots May Vary 2 Pieces Corner Clamp, Maximum Clamping Range 7.5cm, Generally 4 Right-angle Clamp All Together To Use. Material: Aluminum Type: 4 -inch 20.00 X 10.00 X 10.00 8 Pieces Decorative Realistic Artificial Fruits, Assorted Plastic Fruits And/or Eco-friendly Foam Material 2 Sets Geometric Shapes Set, 8-12 Shapes/forms Wood And/or Non-toxic Plastic Shapes Include Sphere, Square, Cylinder, Round Cylinder, Cone, Cube, Hexagonal Prism, Triangular Prism, Square Based Pyramid, Octagonal Prism, Pentagonal Prism, And 1/2 Sphere 2 Sets Geometric Designer Templates, Scale: 0-20 Cm/0-24 Cm Size : 8-1/4" X 5.1" (l*w) Plastic And/or Steel Material 4 Pieces Stack Rack, Dimension: 30 In H X 21 In W X 17 In L At Least 6 Shelves May Be Wooden Or Metal Materials Devised With Rollers To Roll The Rack In Any Location 4 Pieces Picture Frame And Miter Clamp, Weight: 2.5 Pounds Dimensions: 23.9 X 9 X 1.6 Inches Wood Material 4 Pieces Heat Gun, Power: 2,000 Watts Temperature: 50 / 380 / 570 Celcius Steps: 3 Steps Air Flow: 500 / 300 / 500 L/min 4 Pcs Nozzles (air Blast, Reducing, Reflector, Paint Scraper) 1 Pc Scraper 4 Pieces Hot Plate Single Electric Stove, Power:1000w Non-stick Coating Auto-thermostat Various Heat Operations Operating On/off Indicator Light 2 Pieces Tape Dispenser, Weight: 1 Kg Hard Durable Plastic Material 2 Pieces Multi-function Three-hole Puncher, 11.75 X 2.75 X 2.75 Inches High Quality Metal Construction With Clip-in Rings 2 Pieces Metric Scale, 30 Centimeters In Length Scale: 1:1, 1:10, 1:2, 1:20, 1:5, 1:50, 1:100, 1:200, 1:500, 1:1000, 1:1250 And 1:2500 4 Pieces Steel Tape Measure, Tape Rule With First 6 Feet Reinforced With Bladearmor Coating For Maximum Durability 11-inch Tape Standout; 16-inch And 19.2-inch Stud Center Markings Simplify Framing Jobs Mylar Polyester Film Extends The Life Of The Entire Blade Heat-treated Spring Provides Long Life And Smooth Blade Recoil Stanley's Limited Lifetime ; Measures 1-1/4-inch-by-25-feet 3 Pieces Heavy Duty Circular Saw, Corded Or Cordless Adjustable Depth Diameter: 4 1/2 In. With Electric Brake Maximum Cutting Depth At 45 Degrees: 1 In. Maximum Cutting Depth At 90 Degrees: 1-9/16 In. Maximum Speed: 4500 Rpm Spindle Lock 20 Volt 5.5 Lb. 4 Pieces Abrasive Disc Cutter Machine, Electric Powered 18.5” H X 12.2” W X 21.25” D 2200w 14” Blade Diameter 15 Amps Motor (3600 Rpm) Cutting Capacity Of 4.5” At 90˚ And 45˚ 2 Pieces Manual Canvas Pliers, Specifically Designed For Electrical And Mechanical Works 3 Pcs. In 1 Set 1 Combination Plier 6" 1 Cutter Plier 6" 1 Long Nose 6" Offers Comfortable Hand Grip 3 Set Jet-bow Compass Set, Set Includes 6" Speed Compass With Inter-changeable Pen, Pencil, Divider Parts, And Replaceable Needle Points. 4½" Bow Compass With Inter-changeable Pen, Pencil, And Divider Parts. 6" Beam Bar And Slide Coupling For Circles Up To 28" In Diameter And 6" Friction Divider With Self Centering Gear Head And Replaceable Needle Points. Set Also Includes Mechanical Lead Holder, Slip Handle For Spare Ruling Pen, Lead Pointer, Center Tack, And Screwdriver. Packaged In See-through, Hard Plastic Case. 2 Sets Human Head Model, Plastic, Life-size Anatomical Cast With Removable Jaw And 3 Removable Lower Teeth Type: Skull Model Material: Pvc Dimension: App.21x15x19cm/8.27x5.91x7.48in Color: As The Picture Shown Quantity: 1 Set 1 Set Screw Drivers Set, Philips Or Slotted Sl 3/16 In. X 3 In. (x2), 3/16 In. X 6 In., Sl 1/4 In. 1.5 In., Sl 1/4 In. X 4 In. (x2), Sl 1/4 In. X 6 In. Ph1 X 4 In. (x 2), Ph2 X 1.5 In., Ph2 X 4 In. (x2) 2 Offset Screwdrivers 6 Precision Screwdrivers: Ph0, Ph1, Sl 1.4 Mm, Sl 2 Mm, Sl 2.4 Mm, Sl 3 Mm 2 Sets Pliers And Grip Set, 10 Piece Tray Set Includes 1 Each Of The Following: 10r, 10wr, 7wr, 7r, 7cr, 6ln, 9ln, 5wr, 6r, 11r Weight: 11.80 Lb 28.00 X 11.80 X 1.30 Inches 2 Sets Artist Stool With Wheels, Height Adjustable & 360° Swivel Soft Pu Leather Cushion Detachable Design Dimension: Seat Diameter: 16.2" Seat Height: 25.6"-35.8" Full Height: 37.4"-47.6" Max Weight Capacity: 300lbs 6 Pieces Screen Print Squeegee, Material: Natural Rubber, Wood, Stainless Hardness: 70 Durometer Length: 25cm/10" Width: 10cm/3.9" Thickness: 2.3cm/0.9'' 8 Pieces Mixing Paint Palette, Material: Stainless Color: Silver Size: Approx 6.75" X 5.5"compact 12 Pieces Carving Chisels For Wood, Material: 45# Steel And Wood Color: Wood Color + Silver Quantity: 12 Pcs Total Weight : 892 Kg Wooden Handle Length Of Each Chisel: 95mm/3.74” Total Length Pf Each Chisel: 20.5mm / 8.07” Size: 1x V-straight Parting Tool: 14.6mm / 0.57” 1x Round Nose Chisel: 7.8 / 0.31 1x Skew Wood Turning Chisel: 7.8mm / 0.31” 1x Bent Chisel: 7.8mm / 0.31” 1x Wood Chisel: 7.8mm / 0.31” 1x Skew Wood Turning Chisel: 8mm / 0.31” 1x Pointed Wood Chisel: 8mm / 0.31” 2x Straight Chisel: 7.8mm 13.7mm”/ 0.31” 0.54” 3x Straight Gouge: 12.8” 16.1mm 11.7mm/ 0.50” 0.63” 0.46” 2 Sets Files Set For Jeweler, Wood Carving, Craft Metal And Glass Stone, 10 Pcs / Set 5x180mm Stone Precision Needle Files Tool Woodworking Carving The Craft Metal Rasp Wood Hand Tools Material: Metal Color: Gray/ Silver Model: Needle Files Size : 14.5x1x1 Weight: 0.05 Kg 2 Sets Heavy Duty Multi-purpose Bench Vise, Jaw Width: 5", Opening: 4-1/4" Durable Cast Steel Construction Head Swivel 360 Degree Full 360-degree Rotational Jaws Unique "v" Jaws Provide 4 Point Holding Power 2 Pieces Anvil, Weight: 55 Lbs. (sculpture) 9 Lbs. (jewelry Works) Metalsmith, Jewelers Forming Tool, Essential For Jewelry Repair, Shaping, Flattening, Hardening Metals Material: Iron Surface Size: (l X W X H): Approx. 6 X 3.3 X 9cm/2.36 X 1.3 X 3.54inch, Height: Approx. 5.5cm/2.17inch 1 Piece Welding Protective Suite, Made Of High-quality Denim Material, It Can Be Worn Many Times, It Will Not Fade For A Long Time. Unique And Comfortable Design, Wear-resistance And Dirty Resistance. Reinforced And Stitched The Crotch, Cuffs, Pockets To Prevent Accidental Tearing. The Highly Elastic Cuffs Make It Comfortable And Convenient To Wear. Size: 170 Height: 168-173cm Waist: 76-84cm/29.9-33 Inches Weight: 57.5-135kg 5 Pieces Welding Apron, Features: Material: Constructed With Artificial Cow Suede Which Is Not Only Durable But Also Flexible, And The Apron Offer Puncture Resistance, Tear Resistance And Cut Resistance. Size: (approx) (lxw) 90x60cm/35.4x23.6inch, Long Full Coverage Apron Protects You Until The Knee When You Are Working. Friendly: The Straps On The Waist Can Be Adjusted To Fit Your Body Better. They Are Designed To Hang Over The Shoulder Which Means That Weight Is Distributed Evenly Over The Shoulders. Never Suffer Neck And Back Pain Again. Pockets: 6 Pockets For Tools And Work Accessories, Include One Cell Phone Pocket And One Pencil Pocket. You Can Put Everything You Need Close To Hand In It Instead Of Constantly Search For Them. The Cell Phone Pocket Is Deep To Prevent The Phone From Falling Out. Application: Not Only For Woodworking And Welding But Also Useful For Many Other Work And Home Tasks Like Bbq And Gardening, Unique Gift Apron For Men, Women, Mothers, Fathers. Specifications: Material: Artificial Cow Suede Color: Yellow Size: (approx) (lxw) 90x60cm/35.4x23.6inch Package Included: 1 Pc X Apron 5 Pieces Welding Hood Caps, Flame Retardant Cloth Full Protection This Welding Hood Offers An Essential Mix Of Durability, Comfort And Protection. The Hood Features A Mesh Lining To Allow Sweat Vapour To Quickly Evaporate The Presoftened, Lightweight, Air Cushioned Fabric For Maximum Comfort. This Hood Can Protect Your Neck, Face And Head From Welding Fire Flash, Splash Very Well. Wear-resistant, Fire-retardant, Spark-proof, Double Protection Of Personal Safety And Sweat Absorption Specification: - Long :approx. 45cm/ 17.72inch - Shoulder Width: Approx. 43cm/16.93inch(xl) 5 Pieces Welding Gloves 10.5" Welding Leather Gloves Hgvc01 Product Description • Size: 10.5" • Use For Driver, Machining Operator Etc. • All Applications Which Require A High Level Of Anti-skid And Abrasion-resistant • Applying Universally To The Transporting And Cargo Handling Workers, Recycling Work, And Horticulture Workers, Drivers And Etc. • Cow Split Leather Gloves • Full Palm, Full Lining • Made With Top Quality Material For Industrial And Commercial Use 5 Pieces Welding Protective Visitor Glasses, Protective Visitor Glasses: Anti-fog With Uv Protection Glasses Product Name：safety Eyewear Glasses Color：clear, Dark Grey Feature：protective Glasses Lens Color：clear, Dark Grey Style：work Safety Glasses Package：blister Size: 17*17*7cm 5 Pieces Welding Helmet, Auto Darkening Welding Helmet Viewing Area:90×35mm Cartridge Size:110×90×10mm Arc Sensor:2 Light State:din 4 Dark State:fixed Shade 10 Shade Control:unadjustable Power On/off:fully Automatic Sensitivity Control:unadjustable,auto Uv/ir Protection:din 16 Power Supply:solar Cells. Re-chargeable Battery .no Battery Change Required Switching Time:1/5000s,from Light To Dark Dark To Light:0.15-0.45s Auto Low Amperage Tig:≥20amps(dc), ≥20amps(ac) Operating Tep:-5°c~+55°c Storing Tep:-20°c~+70°c 5 Pieces Welding Mask, Product Details Of Heavy Duty Welding Mask (108x50x3mm) Movable Glass Impacted Resistant Shell Anti Wear Moveable Type Glass Packing: Polybag With Color Sticker 5 Pieces Hard Hat, Hard Safety Helmet With Chin Strap Color: Blue, Orange, White, Yellow Material: Acrylonitrile Butadiene Styrene (abs) Shell, With Six Point Adjustable Ratchet Suspension For Shock Absorbing And Elastic Chinstrap Tough, Lightweight, Durable With Six Point Adjustable Ratchet Suspension For Shock Absorbing And Elastic Chinstrap. A Hard Hat Is A Type Of Helmet Predominantly Used In Workplace Environments Such As Industrial Or Construction Sites To Protect The Head From Injury Due To Falling Objects, Impact With Other Objects, Debris, Rain, And Electric Shock. Durable, Lightweight And Comfortable 12 Pieces Compact Electric Kilns, Degree F (max): 2300°f Cone: 6 Firebrick: 3" Volt: 240 / 208 Watt: 3,600 Ampere: 15 Recommended Breaker (amp): 20 Receptacle: 6-20 Size Interior (wide X High X Deep ): 13.5 X 13.25" Size Exterior Including Stand (wide X High X Deep ): 22 X 28 X 25.5" Volume (cu Ft.): 1.22 1 Piece Heat Press Transfer Machine, Electric Powered 21.2 X 20.2 X 19.2 In. 220v 1800w 0-400˚f (0-220˚c) 0-999 Sec. 1 Piece Rubber Mallet, Rubber Hammerhead Fiberglass Handle Packing: Color Label Weight: 32oz 4 Pieces Ball Peen Hammer, Material: Fiberglass Handle & Steel Head Size : 16 Ounce Weight: 3.7 Pound 4 Pieces Cutting Mat, Flexible Cutting Mat A2 Size (24 X 18 Inch) Self-healing 5 Layered Double Sided With Marked Pattern And Grids (green) Material: Polyvinyl Chloride Color: Green Item Dimensions: 15 X 15 X 15 Centimeters Shape: Hexagonal Weight: 200 Grams 6 Pieces Heavy Duty Extension Wire, Heavy Duty Extension Power Strip With Safety Switch Protection Socket 4 Meters , Extension 3 Pieces 36” Smart Led Tv, Width 96.74cm, Gross Weight: 10.8 Kg, Net Weight 7.9kg, Height 57.18, Length 7.99cm, Screen Size: 43-inch, Tv Resolution: Full Hd 2 Piece Laptop Computer, Laptop Screen Size: 15 Inches, Graphics Chipset: Integrated, Storage Capacity:512gb, Storage Type: Ssd, Ports/interface: Usb 2.0, Usb 3.0, Vga, Processor Type: Intel Core I7, Number Of Cores: Dual-core, Os:windows, Weight:3 Kg, Battery Capacity 4910mah, Cpu Frequency: 2.9ghz 1 Piece Photo Printer, Wireless Photo All-in-one With Auto Duplex Printing Print, Scan, Copy Auto Duplex Printing Wireless, Wireless Pictbridge, Mopria, Airprint, Direct Wireless Recommended Monthly Print Volume: 30 - 100 Pages Operating System: Win 8 / Win 7 / Vista / Xp, Mac Os X 10.7.5 And Later Borderless Printing: A4 / Letter / 4 X 6" / 5 X 7" / 8 X 10") Standard Paper Input (front Tray): 100 Sheets (a4/ Ltr) / 20 Sheets ( 4 X 6 “ ) Paper Weight: 64 To 105 G/m2 Up To 300 G/m2 Dimension (w X D X H): 449 X 304 X 152 Mm Weight: 5.4 Kg Interface / Connectivity: Usb 2.0 Hi-speed / Wireless Lan /wireless Pictbridge, Direct Wireless Scanner Type: Flatbed 1 Piece Portable Sound System With Microphone, Led Lights 2 Wireless Microphone Wired Microphone / Guitar / Line In Mic Priority Over Voice On/off Line Out Remote Control Usb / Bluetooth / Nfc / Fm Capabilities Frequency Response: 50hz-20khz Power System: Ac Adaptor / 12vdc In / Internal Rechargeable Battery 100v-240v, 60hz Power Supply Adaptor 1 Set 50” Led Tv, Height: 64.42 Cm, Width:111.68cm,length:5.99cm, Gross Weight:16kg. Screen Size: 50-inch Led, Net Weight: 11.6kg, Tv Resolution: 4k Ultra Hd, Connectivity: Wireless Lan Built-in (wi-fi), Hdmi Ports: 3, Usb Ports:1 2 Piece Soft Box With Stand, 2 Pcs Studio Lighting Softbox 50*70cm, 2 Pcs 2m Light Stand, 2 Pcs 45w Light Bulb, Photography Kit 100-240v, Maximum Height: 200cm/78", Collapsible Height:65cm/32" 2 Pieces Display Panel Board, Product Weight:8kg,choose Type:fabric,number Of Panels:4,type: Pole And Panel,graphic Type: Loop Nylon, 900x600mm Or 1000x700mm 6 X 900mm Poles 25 Mm Diameter With Clips Weight Approx 11-14kg 1 Piece Magnetic Whiteboard, Size:4x8 (48x96 Inches)feet, Aluminum Frame,with Sliding Whiteboard Marker/eraser Tray,protective Plastic Rubber Corners 1 Piece Chalkboard, Length: 60.5", Height: 36.5",unit Weight: 24.00 Lbs Per Unit Color: Black Duro-slate Over ¼”hardboard Backing, Full Length Chalk Tray 1 Piece Offline Mini Compressor, 220v 60hz, Type: Single Cylinder Piston Compressor With Air Tank, Power: 1/6hp, Speed: 1700r.p.m, Air Output Per Min/lit.:20-23l/min, Auto Stop, Start At 3bar (43 Psi) Stop At 4bar (57psi), Working Pressure:0-4 Bar, Air Tank:3.0l, Suitable For Airbrush With Nozzle 0.2mm-1.0mm, Weight: 5kg, Dimension: 31x13x31cm 1 Pieces Styrofoam Cutter, Material:plastic, Size:approx. 190x90mm, Power: 2xc Size Battery (not Included), Feature: Electric Wire Needle Shap, Stainless Steel Wire, Hardness And Diameter Of 0.19mm 1 Piece Potter’s Wheel/electric Potter’s Wheel, Detachable Abs Basin, Advanced High-quality Brushless Motor, Rotary Speed:0-300 Rpm, Pottery Wheel: 25cm, Pottery Forming Machine:350w,electric Pottery Wheel With Foot Pedal And Detachable Basin, Rated Voltage: Ac 110v, Wheel Diameter: 25cm (9.8"), Speed: 0-300r/min, Working Noise:,60 Db, Gross Weight: 14kg (31.1 Lb), Package Dimensions (lxwxh) 53x42x35cm (20.8"x16.53"x13.78") 2 Pieces Weather-proof Safety Box Circuit Breaker, Metal Enclosure Panel Box, Weatherproof, Height:300mm, Depth:150mm, Door: 0.8mm, Body: 0.8mm, Plate: 0.8mm, Metal Body,width:400mm 1 Piece Fire Blanket, 120x99x4cm (l X W X H) Woven Glass Fiber 2 Pieces Exhaust Fan, Size: 12" 9" 6" Rpm: 1350, 1320, 1290 Finish: Power Coated 2 Pieces Medicine Cabinet, Stainless 20x26x5 Inch Single Door Medicine Cabinet 1 Piece Smoke Detector, 120 Volts Ionization Sensor, Clamshell Packaging 1 Piece Disposal Bins, 50 Cubic Movable Bins 2 Pieces Abc = 597,951.44

Details: Sources Sought Notice sources Sought Notice page 12 Of 12 sources Sought Notice *= Required Field sources Sought Notice page 1 Of 12 this Announcement Is Not A Request For Proposal. The Government Will Not Pay Nor Reimburse Any Costs Associated With Responding To This Request. The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. the Department Of Veterans Affairs Is Seeking A Qualified Architect-engineering (ae) Firm To Provide Schematics, Design Development, Construction Documents, Technical Specifications, Construction Period Services, Site Visits, Cost Estimates, As-built Documentation, And All Other Related Information For Project 528a5-24-504, Project Upgrade Buildings 7&8 Electric Room At The Canandaigua Vamc At 400 Fort Hill Ave, Canandaigua Ny 14424. This Project Will Expand The Existing Electrical Rooms On The Ground Floor Of Building 7 And 8, Into Adjacent Spaces And Replace Electrical Components. this Requirement Is Being Procured In Accordance With The Brooks Act As Implemented In Far Subpart 36.6. Applicable Naics Code Is 541330 And Small Business Size Standard Of $25.5 Million. Magnitude Of Construction Is Between $5,000,000.00 And $10,000,000.00. This Is A 100% Service-disabled Veteran Owned Small Business Set Aside. The Anticipated Award Date Of The Proposed A-e Contract Is On Or Before May 20th, 2025 . Potential Contractors Must Be Registered In Sam (www.sam.gov ) And Are Visible/verified/certified As Sdvosb (or Vosb) In Veterans Small Business Certification (https://veterans.certify.sba.gov/ ) At Time Of Submission Of Their Qualifications In Order To Be Considered For An Award. in Order To Assure Compliance With Vaar Clauses, 852.219-75 Va Notice Of Limitations On Subcontracting Certificate Of Compliance For Services And Construction (nov 2022) And 852.219-73 Va Notice To Total Set-aside For Verified Service-disabled Veteran-owned Small Businesses (nov 2022), All Firms Submitting A Sf 330 For This Notice Are Required To Indicate What Percentage Of The Cost Of Contract Performance Will Be Expended On The Concerns Employees And In Which Discipline(s) And Percentage Of Cost Of Contract Performance To Be Expended (and In What Disciplines) By Any Other Consultant/subcontractor Or Otherwise Used Small Or Large Business Entity(s). Any Consultant/subcontractor Or Otherwise Business Entity(s) Used Must Be Identified By Name, Office Location And Size/type Of Business (i.e., Sdvosb, Vosb, 8(a), Small, Large, Etc.). Failure To Provide This Information Will Deem The Firm S Sf 330 Submittal As Nonresponsive And Preclude Further Evaluation all A/e Firms Are Advised That In Accordance With Vaar 836.606-71 The Total Cost Of The Production And Delivery Of Designs, Plans, Drawings And Specifications Shall Not Exceed Six (6) Percent Of The Estimate Cost Of Construction. Other A-e Fees Are Not Included In The Six (6) Percent. Additionally, Far Clause 52.236-22 (c) - Design Within Funding Limitation, Will Be Applicable To This Procurement Action. exsisting Conditions: the Canandaigua Vamc Is Located At 400 Fort Hill Avenue, Canandaigua, Ny 14424. Building 7 And 8 Are Two Of The Main Campus Structures And Contains Sensitive Programming Including Clc S With In-patient Care. The Existing Electrical Rooms Are Insufficient In Size And Does Not Meet Current Codes/standards As Set By The Va. The Adjacent Spaces To These Electrical Rooms Consist Of Available Space For Expansion. All Electrical Equipment Shall Be Replaced Unless Otherwise Directed By The Va And All Building Services Shall Placed On Emergency Power. All Proposed Equipment Shall Meet Current Va Standards And Codes. scope Of Service Required 1. Provide Investigative, Schematic, And Design Development Services, Production Of Construction Documents, Working Drawings, Specifications, And Cost Estimates, And Perform Construction Administration Including Shop Drawing And Submittal Review As Required To Complete The Work And As Per The Architect/engineer (a/e) Required Deliverables. The A/e Firm Shall Analyze The Existing Conditions And Working With The Medical Center Staff Develop Various Proposals To Meet The Project Intent. Develop Accepted Proposal Into A Final Design And Cost Estimate To Best Suit The Needs And Constraints Of The Government, While Incorporating Vamc Canandaigua Engineering Services, Va Network 2, Or Any Other Government Comments. 2. Provide For Necessary Design For Utility Connections, Alternative Power, Phasing, And Support For Building Operations Through Construction With Minimal Interruptions. 3. Perform Load Test On Existing Generator And Emergency Power System To Confirm Existing Supply Will Support Additional Loads. 4. Provide An Independent Analysis To Locate Any Underground Or Hidden Utilities For Inclusion In The Design If Applicable, To Confirm Viability Of Planned Excavations Or Demolitions Of To Support Design Objectives. Such Analysis May Include Ground Penetrating Radar, Review Of Existing Va Documentation Or Other Viable Options To Verify These Utilities. 5. Attend All Design Review Meetings And Make All Necessary Site Visits During Design Phases To Gather Information Necessary From The Existing Site Conditions, Building Plans, Utility Plans, Etc. To Provide A Complete Assessment Of The Proposed Work. The Proposal Shall Include An Identified Number Of Visits. The Va Shall Provide Access To Hardcopy/electronic Files. The A/e Firm Shall Perform All Searches Of The Files For Any Required Reference Materials To Support Design Efforts. Limited Digital Drawings Are Available. 6. Attend Pre-bid Job Walk And Provide All Engineering Responses To Questions Asked By Potential Bidders And Issue Addendum When Necessary. 7. All Work Shall Be In Accordance With All Applicable Codes In The Department Of Veteran Affairs (va) Design Manuals And Va Publications (master Construction Specifications, Construction Standards, National Fire Protection Association (nfpa), Underwriters Laboratory, International Building Code Ibc, National Electric Code (nec), Building Codes And Standards, And Va Information Security Handbook 6500.6, Etc.) 8. All Work Containing Hazardous Materials Shall Be In Accordance With New York State Code Rule 56 Regarding Asbestos And Other Hazardous Materials, Ahera Regulations 40 Cfr Part 763.86, 763,87, And Osha 1926.1101(k)(1). 9. All Submissions Shall Include Physical And Digital Submissions Of Drawings And Specifications. 10. All Drawings Shall Be Submitted At Architectural E1 (30 X 42 ) For Full Sized Sets And Architectural C (18 X 24 ) For Half Sized Sets. All Sets Shall Be Bound. 11. All Cad Submissions Shall Be Provided In Autocad 2017 Unless Discussed Otherwise. Revit Models Shall Also Be Submitted In Addition To Cad Documents If Created. 12. The Autodesk Build Construction Management Platform (autodesk Construction Cloud Acc) Will Be Used For Information Sharing And Project Management Through The Design And Construction Phases. This Software Is Provided By The Va At No Additional Cost To The A/e. a. Platform Training Will Be Provided By The Va And Is Required By All Parties To Access. b. The A/e Shall, Upon Award, Provide A Comprehensive List Of Project Staff Who Will Need Access To Acc Including: i. Full Name ii. Company Name iii. Email Address iv. Role/position On The Project c. Completion Certificates Of Training By All Members Of The Team Shall Be Provided To The Cor Within 12 Calendar Days. d. Additional Members Can Be Added At Any Time Upon Written Request To The Cor. e. Acc Shall Be Used For All Digital Submissions, Official Project Correspondence, Submittals, Rfis, Schedules, Actionable Tasks, Photos, Surveys, Reports, Inspections, Etc. 13. Provide Design, Construction, And Post-construction Services As Listed Below. a Full Scope Of Services Including The Deliverables Will Be Included In The Formal Solicitation After A Review Of The Sf330s. Location canandaigua Vamc. 400 Fort Hill Avenue Canandaigua, Ny 14424 cost Range estimated Construction Cost Range: Between $5,000,000 And $10,000,000. type Of Contract Contemplated the Department Of Veterans Affairs Is Contemplating Awarding A Firm Fixed Price Contract. design Completion Period: The Department Of Veterans Affairs Requires Design And Contract Support Services. The A/e Shall Deliver 100% Bid Documents In 220 Calendar Days From The Notice To Proceed (ntp). selection Criteria Descriptions the Selection Criteria Descriptions Are Provided Below. professional Qualifications Necessary For Satisfactory Performance Of Required Services. offerors Will Be Evaluated In Terms Of The Qualifications, Competence And Experience Of The Key Personnel And Technical Team Proposed To Accomplish This Work. Key Personnel Are Individuals Who Will Have Major Contract Or Project Management Responsibilities And/or Will Provide Unusual Or Unique Expertise. Provide A Balanced Licensed And Or Certified Workforce In The Following Disciplines Architecture, Structural, Mechanical, Electrical, Interior Design, Environmental Services And Fire Protection Engineering As Needed. The Designers Of Record Shall Perform And Direct The Design Within Their Respective Discipline And Shall Sign And Seal The Drawings. The Lead Designer In Each Discipline Must Be Registered But Does Not Have To Be Registered In The Particular State Where The Project Is Located. submission Requirements: Provide Resumes For All Proposed Key Personnel. Resumes Are Limited To One Page Each And Should Cite Project Specific Experience And Indicate Proposed Role In This Contract. Provide Professional Registration, Certification, Licensure And/or Accreditation. Indicate Participation Of Key Personnel In Example Projects In The Sf-330 Part 1 Section G. (2) Specialized Experience And Technical Competence specialized Experience And Technical Competence Required For This Specific Project, Including, Where Appropriate, Experience In Energy Conservation, Pollution Prevention, Waste Reduction, And The Use Of Recovered Materials. offerors Will Be Evaluated On Specialized Experience And Technical Competence In The Performance Of Services Similar To Those Anticipated Under This Contract With Regard To: experience With Design Of Inpatient Medical Care Facilities. experience With Design Of Multifunctional Offices. experience With Specialized Hvac And Electrical Distribution Systems Design For Healthcare Facilities; experience In Providing Post Construction Award Services (shop Drawing Review, As-built Drawing And Quality Assurance Plan (qap) Preparation, Construction Inspection Services, And Operating And Maintenance Manuals). experience With Government Designs And Construction. experience With Extensive Site Survey Skills submission Requirements: Provide Up To Five (5) Projects Completed Or Substantially Completed Within The Past Five (5) Years That Best Illustrate Specialized Experience Of The Proposed Team In The Areas Outlined Above And The Scope Of Work Of The Project. Example Projects Shall Note Project S Square Footage. All Projects Provided In The Sf-330 Must Be Completed By The Office/branch/regional Office/individual Team Member Actually Proposed To Manage And/or Perform Work Under This Contract. To Enable Verification, Firms Should Include The Duns Number Along With Each Firm Name In The Sf-330 Part 1, Section F Item 25 Firms From Section C Involved In This Project, Block (1). Include A Contract Number Or Project Identification Number In Block 21. Include An E-mail Address, And Phone Number For The Point Of Contact In Block 23(c). Include In The Project Description The Contract Period Of Performance, Award Contract Value, Current Contract Value, A Summary Of The Work Performed That Demonstrates Relevance To Specialized Experience As Outlined Above. If The Contractor Served As A Subcontractor On A Project, Indicate The Value Of The Work They Provided Towards The Performance Of The Overall Project. If A Project Was Performed By A Joint Venture, And Not All Joint Venture Partners Are On The Team Proposed For This Contract, The Offeror/team Should Specifically Address The Work Performed By The Joint Venture Partner Offering/teaming On This Contract. Likewise, If The Offeror/team Member Worked As A Subcontractor On A Project, The Description Should Clearly Describe The Work Actually Performed By The Offeror/team Member And The Roles And Responsibilities Of Each On The Project, Rather Than The Work Performed On The Project As A Whole. If The Project Description Does Not Clearly Delineate The Work Performed By The Entity/entities Offering/teaming On This Contract, The Project Could Be Eliminated From Consideration. note: If The Offeror Is A Joint Venture, Information Should Be Submitted As A Joint Venture; However, If There Is No Information For The Joint Venture, Information Should Be Submitted For Either Joint Venture Partner, Not To Exceed A Total Of Five (5) Projects For This Criterion. Projects Shall Be Submitted On The Sf-330. For Submittal Purposes, A Task Order On An Idiq Contract Is Considered A Project, As Is A Stand-alone Contract Award. Do Not List An Idiq Contract As An Example Of A Completed Project. Instead, List Relevant Completed Task Orders Or Stand-alone Contract Awards That Fit Within The Definition Above. Examples Of Project Work Submitted That Do Not Conform To This Requirement Will Not Be Evaluated. failure To Provide Requested Data, Accessible Points Of Contact, Or Valid Phone Numbers Could Result In A Firm Being Rated Lower. all Information For Criterion 1 Should Be Submitted In Part 1, Section F Of The Sf-330. The Government Will Not Consider Information Submitted In Addition To Part 1, Section F In Evaluating Criterion 1. (3) Capacity this Factor Evaluates The Ability Of The Firm, Given Their Current Projected Workload And The Availability Of Their Key Personnel, To Accomplish The Possible Myriad Of Design Projects In The Required Time. submission Requirements: Describe The Firm S Ability To Concurrently Perform And Manage Multiple Projects In Different Locations To Meet Aggressive Schedules, Multiple Disciplines, And Control Costs And The Firm S Capacity To Accomplish Multiple Projects Simultaneously. the General Workload And Staffing Capacity Of The Design Office Will Be Evaluated. list Current Projects With A Design Fee Of Greater Than $20,000 Being Designed In The Firms Office. ii. Indicate The Firms Present Workload And The Availability Of The Project Team (including Sub-consultants) For The Specified Contract Performance Period; iii. Describe Experience In Successfully Delivering Projects Per Performance Schedule, Providing Timely Construction Support, And Successfully Completing Multiple Projects With Similar Delivery Dates (4) Past Performance: Visn2 Will Evaluate Past Performance On Recent And Relevant Contracts With Government Agencies (emphasis On Va Work) And Private Industry In Terms Of Cost Control, Quality Of Work, Compliance With Performance Schedules And A Record Of Significant Claims Against The Firm. i. Recent Is Defined As Performance Occurring Within Five (5) Years Of The Date Of This Sources Sought, Except Those Ongoing Projects Must Have Begun No Less Than One (1) Year Prior To The Issuance Of This Sources Sought. ii. Relevancy Is Defined As Performance Of Work On Projects That Are Similar In Scope Within A Va Hospital Setting In Relation To The Type Of Projects Anticipated Under The Resultant Contracts. respondents With No Previous Past Performance Shall State This When Addressing The Selection Criteria. Where There Is No Record Of Past Performance, The Proposal Will Be Evaluated Neither Favorably Nor Unfavorably. Superior Performance Ratings On Relevant Projects May Be Considered More Favorably In The Evaluation. submission Requirements: Submit A Completed Cpars/acass Evaluation For Each Project Under Criterion 1. If There Is Not A Completed Cpars/acass Evaluation, The Past Performance Questionnaire (ppq) Included In This Notice Is Provided For The Offeror Or Its Team Members To Submit To The Client For Each Project The Offeror Includes Under Criterion 1. An Offeror Shall Not Submit A Ppq When A Completed Cpars/acass Is Available. If A Cpars/acass Evaluation Is Not Available, Ensure Correct Phone Numbers And Email Addresses Are Provided For The Client Point Of Contact. Completed Ppqs Should Be Submitted With Your Sf-330. If The Offeror Is Unable To Obtain A Completed Ppq From A Client For A Project(s) Before The Response Date Set Forth In This Notice, Offerors Should Complete And Submit With Their Responses The First Page Of The Ppq (attachment), Which Will Provide Contract And Client Information For The Respective Project(s). Offerors May Submit A Ppq Previously Submitted Under A Different Notice/rfp (legible Copies Are Acceptable) As Long As It Is On The Same Form As Posted With This Synopsis. Offerors Should Follow Up With Clients/references To Ensure Timely Submittal Of Questionnaires. If Requested By The Client, Questionnaires May Be Submitted Directly To The Government's Point Of Contact, Network Contracting Office 2 Attn: Amanda Baumler Via Email At Amanda.baumler@va.gov Prior To The Response Date. Offerors Shall Not Incorporate By Reference Into Their Response Ppqs Or Cpars Previously Submitted In Response To Other A/e Services Procurements. However, This Does Not Preclude The Government From Utilizing Previously Submitted Ppq Information In The Past Performance Evaluation. (5) Location: Location In The General Geographical Area Of The Project And Knowledge Of The Locality Of The Project; Provided, That Application Of This Criterion Leaves An Appropriate Number Of Qualified Firms, Given The Nature And Size Of The Project iv. To Be Rated Acceptable For This Evaluation Factor, The A/e Firm Must Be Within 450 Miles From The Prime Contractor S Main Office Or Official Satellite Office To The Canandaigua Vamc At 400 Fort Hills Avenue. Canandaigua, Ny 14424. v. This Distance Is Determined According To Http://maps.google.com/ vi. This Factor Evaluates The Distance The Ae Firm's Design Office Or Official Satellite Office(s) From The Location Of Work (va Medical Center). Please Provide The Address (es) And Distance Of Your Closest Office To The Address Listed In Iv. Above. submission Requirements: Indicate Firms/teams Location, Including Main Offices, Branch Offices And Any Subconsultants Offices And Demonstrate How This Will Be Advantageous To The Government. (6) Veteran Owned: The Extent To Which Potential Contractors Identify And Commit To The Use Of Service-disabled Veteran-owned Small Businesses, Veteran-owned Small Businesses, And Other Types Of Small Businesses As Subcontractors. (7) Construction Period Services: Experience In Construction Period Services To Include Professional Field Inspections During The Construction Period, Review Of Construction Submittals, Support In Answering Requests For Information During The Construction Period, And Support Of Construction Contract Changes To Include Drafting Statements Of Work, And Cost Estimates Shall Be Included As An Evaluation Criterion When Construction Period Services Is Included In The Statement Of Work For A-e Services. (8) Experience Specific Experience And Qualifications Of Personnel Proposed For Assignment To The Project And Their Record Of Working Together As A Team. submission Requirements: Offerors Shall Submit Evidence Of Individuals Experience And Qualifications In Their Respective Fields. Additionally, Documentation Must Be Provided To Show These Individuals Have Worked Together As A Team On Previous Projects And Their Role. (completing Sections E, F, And G, On The Sf-330 Meets The Documentation Requirement). Furthermore, Offerors Shall Describe The Ability Of The Firm To Manage, Coordinate And Work Effectively With Team Members, Both Internal Staff And Consultants. Discuss The History Of Working Relationships With Team Members, Including Joint Venture Partners Where Applicable. (9) Reputation Reputation And Standing Of The Firm And Its Principal Officials With Respect To Professional Performance, General Management, And Cooperativeness. submission Requirements: Offerors Shall Provide Documentation (awards, Certificates, Publications, Commendations From Within The Community) As Evidence Of Reputation And Standing Of Its Firm. (10) - Claims - Record Of Significant Claims Against The Firm Because Of Improper Or Incomplete Architectural And Engineering Services. Offerors With Substantiated Claims Against The Firm As A Result Of Improper Architectural And Engineering Services Provided In The Last Three (3) Years. submission Requirements: Records And Any Other Documentation Of Substantiated Claims Highlighting Improper Or Incomplete Architectural Engineering Services Against The Firm Within The Last Three (3) Years. The Sf-330 Shall Contain A Statement Affirming That There Are No Records Of Significant Claims Because Of Improper Or Incomplete Architectural And Engineering Services. please Note: The Ae Evaluation Board Must Be Provided With Complete And Accurate Information For All Ten (10) Evaluation Factors Above In Order To Rank As Qualified And Eligible Firms. Therefore, The Ae Firm Must Expand Upon, As It Deems Necessary, On Any Evaluation Factor Not Well Demonstrated Or Addressed With Part 1a To Part Ig And Part Ii Of The Sf330. The Ae Firm Shall Use Part Ih And/or Use Additional Sheets To Supplement/address All Evaluation Factors To Clearly Demonstrate Its Qualifications. evaluation Scoring evaluation Factors 1, 2, 3, 5, 8, 9 And 10 Will Be Evaluated Using The Following Adjectival Ratings As Follows: outstanding: Proposal Meets Requirements And Indicates An Exceptional Approach And Understanding Of The Requirements. Strengths Far Outweigh Any Weaknesses. Risk Of Unsuccessful Performance Is Very Low. good: Proposal Meets Requirements And Indicates A Thorough Approach And Understanding Of The Requirements. Proposal Contains Strengths Which Outweigh Any Weaknesses. Risk Of Unsuccessful Performance Is Low. acceptable: Proposal Meets Requirements And Indicates An Adequate Approach And Understanding Of The Requirements. Strengths And Weaknesses Are Offsetting Or Will Have Little Or No Impact On Contract Performance. Risk Of Unsuccessful Performance Is Moderate. marginal: Proposal Does Not Clearly Meet Requirements And Has Not Demonstrated An Adequate Approach And Understanding Of The Requirements. The Proposal Has One Or More Weaknesses Which Are Not Offset By Strengths. Risk Of Unsuccessful Performance Is High. unacceptable: Proposal Does Not Meet Requirements And Contains One Or More Deficiencies. Proposal Is Not Awardable. The Firm S Proposal Demonstrates A Misunderstanding Of The Requirement And The Approach Fails To Meet Performance Standards. The Firm S Proposal Has Major Omissions And Inadequate Details To Assure Evaluators That The Offeror Has An Understanding Of Requirement. the Ratings Identified Below Were Used In The Evaluation Of Past Performance (criterion 4): substantial Confidence: Based On The Offeror S Recent/relevant Performance Record, The Government Has A High Expectation That The Offeror Will Successfully Perform The Required Effort. No Doubt Exists Based On The Offeror S Past Performance That They Can Satisfy The Requirements Of The Contract. satisfactory Confidence: Based On The Offeror S Recent/relevant Performance Record, The Government Has A Reasonable Expectation That The Offeror Will Successfully Perform The Required Effort. Little Doubt Exists Based On The Offeror S Past Performance That They Could Satisfy The Requirements Of The Contract. unknown Confidence (neutral): No Recent/relevant Performance Record Is Available Or The Offeror S Performance Record Is So Sparse That No Meaningful Confidence Assessment Rating Can Be Reasonably Assigned. limited Confidence: Based On The Offeror S Recent/relevant Performance Record, The Government Has Little Expectation That The Offeror Will Be Able To Successfully Perform The Required Effort. Some Doubt Exists Based On Past Performance That They Could Satisfy The Terms And Conditions Of The Contract. no Confidence: Based On The Offeror S Recent/relevant Performance Record, The Government Has Little Expectations That The Offeror Will Be Able To Successfully Perform The Required Effort. Significant Doubt Exists Based On The Offeror S Past Performance That They Can Satisfy The Requirements Of The Contract. limitations 852.219-73 Va Notice To Total Set-aside For Verified Service-disabled Veteran-owned Small Businesses (nov 2022) (a) Definition. For The Department Of Veterans Affairs, Service-disabled Veteran-owned Small Business Concern Or Sdvosb : (1) Means A Small Business Concern - (i) Not Less Than 51 Percent Of Which Is Owned By One Or More Service-disabled Veterans Or, In The Case Of Any Publicly Owned Business, Not Less Than 51 Percent Of The Stock Of Which Is Owned By One Or More Service-disabled Veterans Or Eligible Surviving Spouses (see Vaar802.101, Surviving Spouse Definition); (ii) The Management And Daily Business Operations Of Which Are Controlled By One Or More Service-disabled Veterans (or Eligible Surviving Spouses) Or, In The Case Of A Service-disabled Veteran With Permanent And Severe Disability, The Spouse Or Permanent Caregiver Of Such Veteran; (iii) The Business Meets Federal Small Business Size Standards For The Applicable North American Industry Classification System (naics) Code Identified In The Solicitation Document; (iv) The Business Has Been Verified For Ownership And Control Pursuant To 38 Cfr Part 74 And Is Listed In Va's Vendor Information Pages (vip) Database At Https://www.vetbiz.va.gov/vip/; And (v) The Business Will Comply With Vaar Subpart 819.70 And Small Business Administration (sba) Regulations Regarding Small Business Size And Government Contracting Programs At 13 Cfr Parts 121 And 125, Provided That Any Reference Therein To A Service-disabled Veteran-owned Small Business Concern Or Sdvo Sbc, Is To Be Construed To Apply To A Va Verified And Vip-listed Sdvosb, Unless Otherwise Stated In This Clause. (2) The Term Service-disabled Veteran Means A Veteran, As Defined In 38 U.s.c. 101(2), With A Disability That Is Service-connected, As Defined In 38 U.s.c. 101(16). (3) The Term Small Business Concern Has The Meaning Given That Term Under Section 3 Of The Small Business Act (15 U.s.c. 632). (4) The Term Small Business Concern Owned And Controlled By Veterans With Service-connected Disabilities Has The Meaning Given The Term Small Business Concern Owned And Controlled By Service-disabled Veterans Under Section 3(q)(2) Of The Small Business Act (15 U.s.c. 632(q)(2)), Except That For A Va Contract The Firm Must Be Listed In The Vip Database (see Paragraph (a)(1)(iv) Of This Clause). (b) General. (1) Offers Are Solicited Only From Vip-listed Sdvosbs. Offers Received From Entities That Are Not Vip-listed Sdvosbs At The Time Of Offer Shall Not Be Considered. (2) Any Award Resulting From This Solicitation Shall Be Made To A Vip-listed Sdvosb Who Is Eligible At The Time Of Submission Of Offer(s) And At The Time Of Award. (3) The Requirements In This Clause Apply To Any Contract, Order Or Subcontract Where The Firm Receives A Benefit Or Preference From Its Designation As An Sdvosb, Including Set-asides, Sole Source Awards, And Evaluation Preferences. (c) Representation. Pursuant To 38 U.s.c. 8127(e), Only Vip-listed Sdvosbs Are Considered Eligible To Receive Award Of A Resulting Contract. By Submitting An Offer, The Prospective Contractor Represents That It Is An Eligible Sdvosb As Defined In This Clause, 38 Cfr Part 74, And Vaar Subpart 819.70. (d) Agreement. When Awarded A Contract Action, Including Orders Under Multiple-award Contracts, An Sdvosb Agrees That In The Performance Of The Contract, The Sdvosb Shall Comply With Requirements In Vaar Subpart 819.70 And Sba Regulations On Small Business Size And Government Contracting Programs At 13 Cfr Part 121 And Part 125, Including The Non-manufacturer Rule And Limitations On Subcontracting Requirements In 13 Cfr 121.406(b) And 13 Cfr 125.6. Unless Otherwise Stated In This Clause, A Requirement In 13 Cfr Parts 121 And 125 That Applies To An Sdvo Sbc, Is To Be Construed To Also Apply To A Vip-listed Sdvosb. For The Purpose Of Limitations On Subcontracting, Only Vip-listed Sdvosbs (including Independent Contractors) Shall Be Considered Eligible And/or Similarly Situated (i.e., A Firm That Has The Same Small Business Program Status As The Prime Contractor). An Otherwise Eligible Firm Further Agrees To Comply With The Required Certification Requirements In This Solicitation (see 852.219-75 Or 852.219-76 As Applicable). These Requirements Are Summarized As Follows: (1) Services. In The Case Of A Contract For Services (except Construction), The Sdvosb Prime Contractor Will Not Pay More Than 50% Of The Amount Paid By The Government To The Prime For Contract Performance To Firms That Are Not Vip-listed Sdvosbs (excluding Direct Costs To The Extent They Are Not The Principal Purpose Of The Acquisition And The Sdvosb/vosb Does Not Provide The Service, Such As Airline Travel, Cloud Computing Services, Or Mass Media Purchases). When A Contract Includes Both Services And Supplies, The 50 Percent Limitation Shall Apply Only To The Service Portion Of The Contract (2) Supplies/products. (i) In The Case Of A Contract For Supplies Or Products (other Than From A Non-manufacturer Of Such Supplies), The Sdvosb Prime Contractor Will Not Pay More Than 50% Of The Amount Paid By The Government To The Prime For Contract Performance, Excluding The Cost Of Materials, To Firms That Are Not Vip-listed Sdvosbs. When A Contract Includes Both Supply And Services, The 50 Percent Limitation Shall Apply Only To The Supply Portion Of The Contract. (ii) In The Case Of A Contract For Supplies From A Non-manufacturer, The Sdvosb Prime Contractor Will Supply The Product Of A Domestic Small Business Manufacturer Or Processor, Unless A Waiver As Described In 13 Cfr 121.406(b)(5) Has Been Granted. Refer To 13 Crf 125.6(a)(2)(ii) For Guidance Pertaining To Multiple Item Procurements. (3) General Construction. In The Case Of A Contract For General Construction, The Sdvosb Prime Contractor Will Not Pay More Than 85% Of The Amount Paid By The Government To The Prime For Contract Performance, Excluding The Cost Of Materials, To Firms That Are Not Vip-listed Sdvosbs. (4) Special Trade Construction Contractors. In The Case Of A Contract For Special Trade Contractors, No More Than 75% Of The Amount Paid By The Government To The Prime For Contract Performance, Excluding The Cost Of Materials, May Be Paid To Firms That Are Not Vip-listed Sdvosbs. (5) Subcontracting. An Sdvosb Must Meet The Naics Size Standard Assigned By The Prime Contractor And Be Listed In Vip To Count As Similarly Situated. Any Work That A First Tier Vip-listed Sdvosb Subcontractor Further Subcontracts Will Count Towards The Percent Of Subcontract Amount That Cannot Be Exceeded. For Supply Or Construction Contracts, The Cost Of Materials Is Excluded And Not Considered To Be Subcontracted. When A Contract Includes Both Services And Supplies, The 50 Percent Limitation Shall Apply Only To The Portion Of The Contract With The Preponderance Of The Expenditure Upon Which The Assigned Naics Is Based. For Information And More Specific Requirements, Refer To 13 Cfr 125.6. (e) Required Limitations On Subcontracting Compliance Measurement Period. An Sdvosb Shall Comply With The Limitations On Subcontracting As Follows: _x_by The End Of The Base Term Of The Contract Or Order, And Then By The End Of Each Subsequent Option Period; Or __by The End Of The Performance Period For Each Order Issued Under The Contract. (f) Joint Ventures. A Joint Venture May Be Considered Eligible As An Sdvosb If The Joint Venture Is Listed In Vip And Complies With The Requirements In 13 Cfr 125.18(b), Provided That Any Requirement Therein That Applies To An Sdvo Sbc Is To Be Construed To Apply To A Vip-listed Sdvosb. A Joint Venture Agrees That, In The Performance Of The Contract, The Applicable Percentage Specified In Paragraph (d) Of This Clause Will Be Performed By The Aggregate Of The Joint Venture Participants. (g) Precedence. The Va Veterans First Contracting Program, As Defined In Vaar 802.101, Subpart 819.70, And This Clause, Takes Precedence Over Any Inconsistencies Between The Requirements Of The Sba Program For Sdvo Sbcs, And The Va Veterans First Contracting Program. (h) Misrepresentation. Pursuant To 38 U.s.c. 8127(g), Any Business Concern, Including All Its Principals, That Is Determined By Va To Have Willfully And Intentionally Misrepresented A Company's Sdvosb Status Is Subject To Debarment From Contracting With The Department For A Period Of Not Less Than Five Years (see Vaar 809.406-2 Causes For Debarment). submission Requirements: unless Paper Offers Are Specifically Authorized In An Individual Solicitation, All Responses To Solicitations Must Be Submitted Electronically As Described Below. Responses Submitted In A Paper Form Are Unacceptable. Failure To Comply With This Requirement May Jeopardize The Possibility Of Receiving An Award Due To Noncompliance With The Submission Requirements. email Submission Requirements Interested Firms Having The Capabilities To Perform This Work Must Submit: One (1) Electronic Sf 330, Including Parts I And Ii, And Attachments (if Any) To Amanda.baumler@va.gov No Later Than 10am, Eastern Standard Time (est) On Tuesday, January 21st 2025 Submittals Received After The Date And Time Identified Will Not Be Considered. The Submittal Will Be Date And Time Stamped By The Microsoft Email System And Will Be The Official Record Of Receipt For The Submission. All Sf 330 Submissions Shall Be Clearly Indicated In Subject Line, Displaying The Solicitation Number And Project Number And Title (abbreviated And Shortened Is Okay). Submission Is To Be No More Than A Total Of Fifty (50) Pages; Size Of Emails Is Not To Exceed 10 Megabytes (mb). If More Than One Email Is Sent, Please Number Emails In Subject Line As 1 Of 2, 2 Of 2 Etc. all Sf 330 Submissions Must Include The Following Information Either On The Sf 330 Or By Accompanying Document: 1. Cover Page With Solicitation Number, Project Number And Title 2. Table Of Contents 3. Copy Of Valid State Registration For Each Lead Designer 4. Copy Of Current Https://veterans.certify.sba.gov/ Sdvosb/vosb Certification 5. Duns Number 6. Cage Code 7. Tax Id Number 8. Email Address And Phone Number (including The Area Code) Of The Primary Point Of Contact.

Details: Complete demolition The demolition object consists of 2 residential buildings which are built next to each other and form a structural living and usage unit. The two residential buildings can basically be described as follows. The rising walls are made of brickwork (plastered) - Avv 170102. The roof covering consists of roof tiles. The canopy of the southern residential building has a roof covering made of tar paper of Avv 170903*. The roof structure is made of wooden trusses / wooden beams / wooden battens (avv 170204*). The sloping roofs and parts of the ceiling were partially covered with plasterboard (avv 170802). The objects have 4 brick chimneys. These are assigned to Avv 170106*. One chimney is used by both objects. The chimneys were used to vent the exhaust air from the tiled stoves inside. The interior walls are wallpapered and partially covered with wood paneling (avv 170204*). The windows are framed with plastic frames. The doors and paneling of the installation ducts are largely made of wood or chipboard from Avv 170204*. The electrical installation and sanitary facilities are largely intact. Demolition of a septic tank (12m³ capacity, filled with Avv 200304 - 6m³ and Avv 170503* - 3m³ fillings), rising walls from Avv 170106*. There are only slight signs of rubbish inside the objects. In addition to the actual demolition of the building, the dismantling of immediately adjacent access routes and ancillary facilities (garden arbors / shelter areas) is planned. Delivery of filling materials and topsoil, landscaping, delivery of replacement quarters for "species protection for bats". Dimensions: Residential building (southern property): Floor area = 95.19m² Average height (including basement) = 7.15m Resulting M³ Ur = 680.61m³ Residential building (northern property): Floor area = 145.81m² Average height (including basement) = 9.83m Resulting M³ Ur = 1,433.31m³ Total volume of structures to be demolished = 2,113.92 M³u.r Sealed areas = 180m²

Details: Lot no. 13.2 - Scaffolding work for the 2nd building of the special needs school 53 (Comenius School) relates not only to the fire protection renovation of the existing building but also to an extension on the north-west gable side of the building. Facade scaffolding extension: The facade scaffolding on the building is planned in particular as working scaffolding for the facade work and window installation, as well as protective scaffolding for the roof work. The upper working level in each case will receive a protective net for the roof work in the eaves area. All working levels will receive internal brackets, which are to be removed as work progresses. The construction will take place in consultation with the local construction supervision. The facade areas consist of reinforced concrete/masonry walls with a ventilated facade. The scaffolding can be anchored in these. Permanent scaffold anchors are not to be provided. The ridge height is approximately 21 m, the eaves height is approximately 12 m. The standing areas around the building are partially uneven. Leveling frames will be required. The facade on Finkenweg is on a slope. The footings must be secured against slipping. All standing areas are on the building's own property. For easy access to the scaffolding, 1 stair tower is planned in addition to the standard ladders. Scaffolding of load class 3 is to be used and erected at a distance of approximately 60 cm from the facade. The decking width must be at least 90 cm. Existing facade scaffolding: The facade scaffolding on the existing building is planned as a working scaffold, which is converted into a roof guard scaffold in the area of the eaves. The two upper working levels will each have a safety net. All working levels will have interior brackets. The construction will take place side by side in consultation with the local construction supervision. The facade areas will not be renovated and must be protected from damage. The facade areas consist of plastered masonry. The scaffolding can be anchored in these. The ridge height is approx. 21 m, the eaves height is approx. 12 m. The standing areas around the building are partially uneven. Compensation frames will be necessary. All standing areas are on the building's own property. For easy access to the scaffolding, 1 stair tower is planned in addition to the standard ladders. Scaffolding of load class 3 is to be used and erected at a distance of <= 60 cm from the facade. The decking width must be at least 90 cm. In the area of the weather protection roof, scaffolding of load class 4 is to be used and erected at a distance of approx. 60 cm from the facade. The decking width must be at least 90 cm. In axis A, bracket scaffolding is to be provided next to the support scaffolding.

Details: General building description: The client is planning to renovate the building at Neustadtstrasse 5 (former executioner's house) in Lenzen. The building is a listed building (individual monument). The building ensemble is made up of three building sections, each with its own roof structure and two or three smaller extensions. The oldest part of the building and part of the residential building is the so-called executioner's tower. The two-storey part of the building consists of brickwork with a 1.50 m high base structure. The wall thickness on the ground floor is 1-1.2 m and on the upper floor 40-50 cm. To the south of the tower, a half-timbered extension is attached as an extension to the residential building. The two-storey extension is built using carpentry as a half-timbered construction. The brick infills are coated with a colored lime slurry. The roof structure is a collar beam roof with a double standing chair. To the north-east, a rectangular stable building with a cantilevered upper floor adjoins the tower. The building is a purely half-timbered structure, filled with bricks and clay stakes. The roof is a gable roof with a collar beam roof as the roof support, with double-standing chairs. The roof covering is designed as a crown covering with plain tiles. An outbuilding, built as a solid, two-storey building with a pent roof and a brick facade, borders the ensemble at the north-west corner of the property. According to the expert reports, all parts of the building have significant structural defects and damage caused by moisture and dry rot. The planned services include the renovation of the damaged findings and the structural reinforcement of undersized structural components. The following construction measures are to be carried out: scaffolding, demolition work, bricklaying and plastering work, carpentry work, roofing work, joinery work, painting work. The overall work will be awarded and carried out according to combined or individual trades in accordance with the following division into lots: Lot 2 - scaffolding Lot 3 - demolition work Lot 4 - main construction trade Lot 5 - carpentry work Lot 6 - roofing work Lot 7 - joinery work Lot 8 - painting work Subject of this tender: Lot 7 - joinery work with the following essential services: covering 30 m² of staircase, wood-based panels 24 wooden single-pane windows, reworking 30 m² window opening provisionally closing 8 slatted frames with wood fiberboard, up to 2.5 m² 10 wooden interior doors, single-leaf, make accessible 2 board shutters, door, larch, 900/2000 mm

Details: Description Republic Of The Philippines Province Of Camarines Norte Municipality Of Mercedes Bids And Awards Committee Bids And Awards Committee Office, Lgu - Mercedes, Camarines Norte Invitation To Bid For Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte. The Local Government Unit Of Mercedes, Camarines Norte, Through The Trust Fund Intends To Apply The Sum Of Two Million Seven Hundred Twenty-five Thousand Two Hundred Sixty-six Pesos Only (php2,725,266.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte - Identification Number 401-24-11-1495/1496/1497/1498/1499. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Local Government Unit Of Mercedes, Camarines Norte, Now Invites Bids For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte As Follows: Item No. Qty Unit Description Lot 1 - Hardware Tools 1 1 Unit Air Compressor Machine, Motor: 1/2 Hp; No. Of Cylinder: 2; Phase: 1; Pressure: 85 Psi; Capacity 46 Liters; Approximate Dimension: 95-100cm (l) X 31-35cm (w) X 64-70cm (h); Weight: 47kg; Inflation Time: 53min; Air Displacement: 208l/min 2 1 Unit Air Spray Gun, Standard Nozzle:1.4mm, Pattern Width:180-250mm, Paint Capacity:600cc, Suitable For Finishing Coat, Optional Nozzle:1.3-2.5mm, Operating Pressure:2-3.5bar Air Cons:4.2-7.1cfm(119-200l/min)" 3 11 Set Angle Grinder Cutting Disk, 10 Pcs.per Set; Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8") 4 11 Unit Angle Grinder, Rated Input Power: 730w; Wheel Diameter: 4"; Rated Voltage: 220v; Frequency: 60hz; No Load Speed: 12,000 Rpm; Weight: Approximately 1.6kg; Grinding Spindle Thread: M10; Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h) 5 7 Pc Chipping Hammer, Item Weight: ‎atleast 13.8 Ounces; Product Dimensions: ‎11" (l) X 1" (w) X 7.5" (h); Material:, Genuine Leather Grip And Forged Steel 6 3 Set Circular Saw With Diamond Blade, 1400w, 185 Mm Blade, Spindle Lock With 24t Diamond Blade 7 3 Pc Claw Hammer, Head Weight: 16oz; Overall Weight: 17oz-23oz; Forged Steel Head; Smooth Face; Fiberglass Handle With Rubber Cushion; Overall Length: 12-14" 8 3 Pc Concrete Chisel, 10'' Forged Steel Chisel 9 3 Pc Crow Bar, 36" Long; Length Tolerance: +- 1/8; Forged Steel Carbon 10 1 Pc Electric Planer; Voltage: 220-240v; Input Power: 1050w; No Load Speed: 1600rpm; Planing Width And Depth: 82x3mm; Heavy Duty Aluminum Base; 11 1 Pc Framing Hammer, Handle Material: Alloy Steel; Item Dimensions: Approximately 16-17" (l) X 5.75-6" (w) X 1.5-2" (h); Item Weight: Atleast 1.4 Pounds 12 1 Unit Gasoline Marine 7hp Speed Type, Single Cylinder; 4 Stroke, Forced Air Cooling; Ohv Displacement (cc): 196 Compression Ratio: 8.5:1 Bore X Stroke (mm): 68x54 Min. Fuel Consumption;395/(kw.h) Valve Clearance: Input Valve: 0.10-0.15mm Idle Speed (rpm): 1400+-140 Max A.c. Output/rpm:3.8/3600 Noise Level:70db (a) Ignition System: Transistorize Magento Ignition Max Torque (n.m/rpm): 10.7/300 Starting System: Recoil Start (recoil Start/electric Starting) 13 10 Pc Hacksaw With Blade, Adjustable Aluminun Alloy Frame With Soft-grip Handle, 90" Adjustable Bladec Angle, 12 Inches (+/- 1/4") Bi-metal Hacksaw Blade, 24 Tpi 14 10 Unit Heavy Duty Corded Drill, Rated Input Power: 750w; Chuck Capacity: Upto 13mm; Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm); Dimension: 268mm (l) X 69mm (w) X 192mm (h); Weight W/out Cable: Approximately 1.6-1.8 Kg; Spindle Collar Diameter Of 43 Mm 15 1 Pc Level, Box Beam Style, Material: Alluminum; Dimension: Approximately 24-24.5" (l) X 2-2.6" (w) X 1.2-1.5" (h); Weight: Atleast 0.8 Pounds 16 3 Pc Mashing Hammer, 3 Lb With Fiberglass Handle, Forged Steel Head 17 3 Pc Masonry Hammer, 800g Solid Rubber Head, Fiberglass Core And Bi-material Slip-resistant Handle, 18 3 Pc Masonry Hand Saw, 15" 380mm Carbon Steel 19 3 Pc Masonry Square, 24"x 16"aluminum, 1/8 '' Thick 20 3 Pc Mason's Level, 60cm Aluminum Reinforced Frame 21 3 Tube Mason's Line, #18 Braided Nylon, 500 Ft, 170 Lb Test 22 10 Set Metal Drill Bit Set, Material: High Speed Steel; 19pcs Per Set (1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm,7.5mm,8mm,8.5mm,9mm,9.5mm,10mm); Point Angle:118degree C; Standards: Din 338; Bit Geometry: Standard Twist Bit 23 8 Pc Meter Tape With Magnetic Hook, Blade Material: Nylon Coated Blade; Dimensions: 16ft (l) X 25mm (w) 24 7 Pc Mig Welding Pliers, Overall Length: Atleast 210mm; Material: High Carbon Steel; Handle Material: Thermoplastic Rubber 25 1 Unit Portable Hand Drill, Power Sourced: Battery Powered - 2pc 21 Volt 1500mah Lithium-ion Batteries; Maximum Rotational Speed: 1500 Rpm; Voltage: 21v; Amperage: 1.5 Amps; Chuck Size: 0.38"; Bit Heads Diameters: From 0.8mm - 10mm; Product Dimensions: ‎9.6" (l) X 2.1" (w) X 7.5" (h); Material: ‎plastic, Rubber, Metal; Item Dimensions: Approx. ‎9.6" (l) X 2.1" (w) X 7.5" (h); Item Weight: Atleast ‎2.5 Pounds; Item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Inspiritech Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws，1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag 26 7 Unit Portable Welding Machine, Input Voltage: 220-240; Frequency: 50-60hz; Output Current: 10-220a; Led Display; No-load Voltage: 85v; Max. Output Current: 220a; Diameter Of Electrode: 1.6-3.2mm; Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable, 27 3 Pc Pull-push Rule, Blade Length 8m/26ft, Blade Width 1", High Impact Abs Case With Durable Rubber, Corrosion Resistant Tru-zero End 28 3 Pc Putty Knife, 3" Stainless Steel With Rubber Handle 29 1 Pc Roofing Hammer: Item Weight: ‎1.25 Pounds; Product Dimensions: Approx. 13.7" (l) X 6.75" (w) X 1.5" (h) 30 1 Unit Sander, Item Dimensions: Approx 11.63" (l) X 5.63" (w) X 6.19" (h); Voltage: 110 Volts; Power Source: Corded Electric; Amperage Capacity:‎ 8.8 Amps; Variable Speed Control Dial (690 -1,440 Ft./min.); Grit Number: 80; Item Weight: Atleast ‎9.5 Pounds; Included Components: ‎belt Sander, 1 Belt, Dust Bag 31 3 Pc Shovel, Rectangular End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 32 3 Pc Shovel, Round End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 33 1 Pc Speed Square, Material: Cast Aluminum; Size: About 18x18x2cm/7.09x7.09x0.79"; Weight: About 130g; Triangle-shaped 34 3 Pc Spirit Level Bar, Aluminum Frame With Magnet, Size 12" (+-1/8"), With 3 Vials (horizontal, Vertical And 45 Degrees) 35 3 Pc Steel Float/plastering Trowel, Thickness 0.7 Mm, Surface Measurement 280mm X 125 Mm(+/- 1mm), High Carbon Steel, Soliod Forged Steel With Plastic Handle 36 1 Pc Trim Hammer, Handle Material: Wood; Head Material: Alloy Steel; Item Dimensions Approximately: 14-15" (l) X 5-6"(w) X 1-2" (h); Item Weight: Atleast 594 Grams 37 3 Pc Trowel, 280x120mm Stainless Plastering Trowel With Plastic Handle 38 1 Pc Utility Knife, Handle Material: Aluminum; Material: Aluminum Alloy; Weight: 120g/pcs; Blade Size: 19mm (w) X 61mm (h) X 0.6mm (t); Blade Material: Steel; Thickness: Atleast 0.6mm 39 7 Pc Welding Helmet, Auto Darkening Helmet, Power Supply: Battery And Solar Powered; Light Shade: Din9-1;, Dark Shade: Din4; Switching Time: 1/25000s; Delay Time: 0.1-0.8s; Sensitivity Adjustment: Stepless Control; Operation Temperature: -5 Degrees- 55 Degrees; Active Viewing Area: 93mmx43mm; Active Viewing Area Size: (+/- 10mm); Item Weight: Atleast 1.85 Pounds; Package Dimensions: ‎approximately 12-12.4" (l) X 9-9.61" (w) X 7-7.68" (h) 40 7 Set Welding Magnets, 6 Pcs/set, Overall Length: Atleast (3"); Hold Capacity: Up To 25lbs; Arrow Design Supports Angle: 45°, 90°, And 135°; Item Weight: 295g; Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches; ‎material: Steel; Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm) 41 1 Set Wood Chisel; 4-piece Set (6mm; 12mm; 19m; 25mm); Tempered Chrome Carbon Steel Blade; Hardened Shank; Rust-resistant, Lacquered Coated Blade; Bi-material Handle 42 3 Pc Wooden Float, 18"x 32", Multi-layered Lot 2 - Food Preparation 1 1 Unit 3 In 1 Burger Griller With Deep Fryer And Steamer, Gas Type; Made Of Stainless Steel And Polished Metal Griddle Plate; Dimensions: Burger Griddle - 18" (l) X 12" (w); Deep Fryer - 8" (l) X 12" (w), Capacity: 2.5 L; Steamer: 11" (l) X 12" (w) 2 6 Unit Barbeque Grill With Sauce Holder And Top Grill, Material: Stainless Steel, Dimension(lwh): 24 In X 12 In X 30 In (3.5 In Grill Pan's Depth) 3 33 Pc Basin; Stainless; Diameter: 22"; Base: 16"; Depth: 7"; Thickness: 1cm 4 47 Pc Beach Umbrella; Round-shaped; Material: Poly Canvass; Diameter: 40""; Pole Stand Length: At Least 45""; Pole Material: Stainless Steel Chrome" 5 6 Pc Boiler Caldero; Big Size & Heavy Duty; Size: Diameter 48cm; Height: 42cm; Makapal, Material: Aluminum 6 6 Pc Boning Knife, 27.3cm, Blade Length:14.6cm, Blade Thickness: 4mm, Wood Handle 7 32 Pc Butcher's Knife; Materials: Stainless; Wood Handle; Size: About 10" 8 29 Pc Caldero With Double Handle; Aluminum Material; Diameter: 46cm; Height: 37cm; With Double Handle; Capacity 5kilos/20l(volume Capacity) 9 48 Set Casserole Set, Stainless Steel, 28, 30 And 32cm Diameter; 16, 18, 20cm Height 10 50 Pc Chef's Knife; About 10 3/4" Long; Material: Stainless Steel; Blade: Full Tang; Riveted Handle 11 56 Pc Chest Cooler, Item Package Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h), Package Weight: ‎5.76kg, Inside Dimensions: 24.95" (l) X 14.58" (w) X 14.77" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l, Color: Any Color 12 51 Pc Chopping Board; Thick Wood; 12"x12" 13 6 Pc Cleaver Knife, 11" Stainless Steel, Weight: 310-340g, Blade Size: 6.5 Inches 14 48 Pc Colander; Stainless Steel; 11"diameter; With Stainless Base And Handle 15 6 Unit Digital Weighing Scale ,30kg Capacity,stainless Tray Size: 35x23cm For 30kg Capacity Weighing Scale, Dual - Display : Weight, Unit Price, Amount, High Light Led Display, Rechargeable Battery, Power Supply: Ac/dc Charger (included) 16 47 Unit Double Burner Gas Stove; Stainless Top And Front; Automatic Ignition; Reversible Trivet; Double Detachable Top Burner; Removable Drip Pan; Dimension: 700mm(l) X 390mm(w) X 140mm(h) 17 7 Unit Double Ring Burner; Heavy-duty Cast Iron; Includes Pol Regulator And 1-metre Hose 16750 Btu Brass Valve With Individual Gas Control Minimal Assembly Required Weight; 3.9kg, Material;cast Iron, Dimensions: (lwh) 36cm X 20cm X 9cm, Fuel Type: Lpg Tank Cylinder With Content And Accessories 18 2 Pc Egg Ring, Stainless Steel, 8.5cm Diameter, 1.5cm Height 19 4 Box Face Masks; 3 Ply Non-woven Disposable Earloop Mask; Quantity: 50pcs/box 20 30 Pc Fish Drying Rack, 4-layer, 45x45x66cm, Foldable 21 6 Pc Fish Scaler, 20cm Stainless Steel 22 6 Pc Fish Scraping Tool, 20cm Stainless Steel 23 54 Unit Food Shelve, 2 Layers: Glass Thickness: 3/16 And 1/4, (w-14" X H-17" X L-30"); Adjustable Layer, Material: Glass & Aluminum With Sliding Door, Offer: Screen Sliding Door To Prevent Moisture 24 204 Pc Food Tray With Glass And Stainless Lid/cover, Stainless Body, Rubberized Stand 32x28x10cm 25 12 Pc Food Tray, Flat, Stainless, 60x40x2cm, Depth: 2cm 26 2 Unit Freezer Chest Type, Gross / Net Volume 10.6 Cu.ft. (10 Liters) / 10.1 Cu.ft. (286 Liters), Functionality 3-in-1 Function – Chilling | Freezing | Fast Freezing, Defrosting System: Manual Defrost, Evaporator:aluminum Defrost,led: 6 Led’s, P:2w, Lamp Life: Min. 50,000 Hours, Weight 40 Kg, Dimensions L 63 X W 111.4 X H 84.7 (cm), Key Features: Inverter Compressor, Sliding Glass Door, Embossed Door & Cabinet, Recessed Side Handle (left & Right), Led Light, Removable Gasket , 1x Basket Wire Shelf, 4x Roller Wheel 27 5 Pc Fruit Crate Plastic 21 X 15 X 12 Inches, Heavy Duty Plastic Material, Color : Black 28 37 Pc Frying Pan 14" In Diameter, Cast Iron 29 4 Unit Gas Range, Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h); 4-gas Burner; 62l Gas Oven; Button Ignition; Top Glass Lid; Net Weight: Maximum Of 28kg; Pan Support: Light Cast Iron Pan Support 30 1 Box Gloves; 100pcs; Food Grade; Size: Medium(7.5cm); Thermoplastic Elastomer(tpe) Material 31 23 Pc Hairnet With Cap; White; Nylon; Washable 32 1 Unit Industrial Oven Stainless Steel, With Wall Insulator To Minimize Penetration Of Heat To The Walls, With Temperature Gauge, Approx. Outer Dimension: 46.5 X 23.5 X 30 Inches; Oven Stand/rack Is Made Of Metal With Rollers And Braking Systems; Stainless Steel Front Panel, With See Thru Glass; About 4 Inch Thickness Of Walls With 2 Trays Per Deck - 4 Trays Capacity; Gas Type 33 35 Pc Kawa 62 Cm Diameter 18 Cm Height, Aluminum With 2 Aluminum Handles 34 12 Pc Kitchen Apron, Waterproof; Stain Resistant Leather Apron 35 6 Pc Kitchen Scissors, Material: Stainless Steel And Plastic Silicone, Size: 22.5x7.3x1.2cm 36 3 Pc Long Handle Stainless Steel Soup Spoon; Color: Silver; Caliber Length; Approx. 12cm.14cm.16cm.18cm, Handle Length; Approx.45cm(17.72inches) 37 6 Pc Long Wooden Ladle; 14" Stainless Steel 38 58 Set Lpg Tank, 11kg Cylinder With Gas Regulator, 1.8m Hose & Steel Hose Clamp 39 9 Set Measuring Cup (set For Liquid), 1 Measuring Cup With Red Graphics; Made Of Nonporous Glass That Won't Warp, Stain, Or Absorb Odors; Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe; Dimension: Approx. 7.13" (l) X 6.75" (w) X 4.38" (h); Measuring Capacity: 500ml 40 9 Set Measuring Cups (set For Dry), Smithcraft Stainless Steel Measuring Cups Set Have 8 Cups.the Sizes Are: 1 Cup (240ml), 3/4 Cup (180ml), 2/3 Cup (160ml), 1/2 Cup (120ml), 1/3 Cup (80ml), 1/4 Cup (60ml), 1/8 Cup (30ml), 1/16 Cup (15ml),1 Locking Ring. 41 6 Unit Mini Electric Fan 7.5" - With Base 10'' 69hz 20w (for Bbq), Non-adjustable Height; Any Color; Electric Powered Fan; 3 Blade 42 21 Pc Mixing Bowl Medium, Approx. Diameter: 28cm, Height:11.2cm; Material: Stainless; Capacity: Atleast 4l 43 200 Pc Monoblock Chair Front:monoblock Chair, Front Legs Distance: 355mm Width Seat, With Backrest, Color: Beige, Seat Width :375 Mm, Deapth: 330 Mm, Side Legs Distance Left: 378 Mm, Side Legs Distance Right 378 Mm, Back Legs Distance: 210 Mm, Back Rest Height:779 Mm, Set Back Height: 405 Mm, Seat Height: 376 Mm, Gross Weight: 2.25 Kgs 44 54 Pc Monoblock Table, 36x36 Inches, H- 28 Inches, Color: Beige, Atleast 3mm Thick 45 2 Pc Non-slip Rectangular Chopping Board; Materials:polypropylene Plastic; Approx Length: 40cm; Width: 25cm; Thickness: 0.5cm; Color : White 46 45 Pc Palamigan Container W/ Gripo 15l, Dimension: 31.8x23.8x48.5cm, Material: High Quality Durable Plastic 47 1 Unit Pressure Cooker 50 Liters Capacity, Aluminum Alloy Material, Pressure: 90kpa, Dimension: 44cm Diameter X 47cm Height 48 40 Pc Round Glass Jars With Lid, 220ml 49 41 Pc Sandok, Stainless Steel, 24.7" Length, With Wooden Handle 50 33 Pc Sandok, Stainless Steel, Length: 14" 51 39 Pc Shansi, Stainless Steel, Length: 14" 52 9 Pc Stainless Steel Dough Cutter Scraper Baking Smoother Cake , Approx. Size: 14-15cm (l) X 11.5-12cm (w) And 22cm (h); Material: Stainless Steel 53 41 Pc Stainless Steel Food Tong 14" Length 54 5 Unit Steamer; Aluminum; About 16"/42cm Diameter; 3 Layers With Cover; With Handle Per Layer 55 3 Unit Vacuum Sealer Machine, 220v, 90w, Sealing Width: 270mm, Power Supply: Ac100-240v/50-60hz, Temperature Control Range: 170-210 Celsius, Abs Material, Size: 370*75*50 (mm) 56 15 Pack Vacuum Sealer Storage Pouches | Bpa Free, Commercial Grade For Food Storage & Sous Vides, Size: 17 X 25cm Material: Plastic, 100pcs/pack 57 27 Pc Water Jug/dispenser With Faucet, 5 Gallons, 20 Liters, Color: Blue, Durable And High Quality Plastic Material 58 7 Unit Weighing Scale; Analog; 20kg Capacity; Approx. Dimensions: 6-7" (l); 8-9" (w); 10-11" (h); Dual Unit (kg And Pounds) 59 2 Pc Wide Mouth Funnel, Stainless Steel, Top Opening: At Least 17 X 5.5 X 6cm, Bottom Opening: At Least 13 X 3.7 X 4cm 60 8 Pc Wire Whisk, Large, Stainless, Approx. 14-15" (l) Lot 3 - Fabrication Of Food Cart 1 7 Unit Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Provision Of Umbrella And 2 Chest Coolers (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo, Note: With Dole, Dilp Logo Fully Painted In A Galvanized Sheet Iron Attached On The Front Of The Sidecar With Approx. 15.7 Inches(h)x15.7 Inches(l) Fully Painted Color: Any Color 2 1 Unit Motorcycle Sidecar (for Fruits And Vegetable Vending): Metal Body, Dimensions L-4ft W-2ft H-2ft, With 17inch Side Wheel 3 11 Unit Negocart With Bicycle Roofing Materials: Bolt & Nut W/ Washer 3/16 X 1 Polycarbonate 6mm X 1.2 X 1.70 Welding Rod Body Materials:tubular 1 X 1 X 1.5;flat Bar 1/8 X 1;flat Bar 2' X 3/8 X 1;plain G.i.;sheet 4' X 8' #26;cylindrical Hinge 1/2" ᴓ;blind Rivets 1/8 X 1/2;cylindrical 1/2;cabinet Handle;cabinet Lock;round Bar 8mm ᴓ;transparents Barrier 1/4 X 4' X 8';welding Rod;stainless Sheet 4' X 8';plain Round Bar 16mm ᴓ: Bicycle Specs: Bmx Type Bike Frame, Front And Rear Free Wheel Hub For Rim Set Single Speed (wheel Set), Tire Size (20"x2.125 Jumbo), Interior Tube (20"x2.125), Bmx Handle Bar, Bmx Fork, Head Parts (h Post, Handle Grip), Chain (single Speed), Pedal (bearing Type), Seat Clamp, Saddle With Spring, Foot Brake (clamp W/ Spring), Crank Pedals (175mm-180mm Cranks) Note: With Dole, Dilp Logo And Tourism Spot At The Front And Side Of Cart, Logo Material: Weather Proof Sticker, Sizes Of Sticker: H-60cm X W-130cm (for Front Of Cart) And H-60cm X W:75cm (for Side Of Cart) Or H-23.6" X W-51" And H-23.6" X W-29.5" Fully Painted Color: Light Blue Lot 4 - Grooming Tools 1 1 Pc All Purpose Comb, 7inch, Plastic Material 2 3 Pc Barber Apron, With Two Pockets, Waterproof, Material: Fiber Size: Approximately 89x69cm - 35x27.2 Inches 3 1 Pc Barber Cape, 140cmx100cm Silk, Waterproof 4 1 Unit Barber Chair, Reclining, Modern Style, Chair Back Height: High-back; Upholstery: Faux Leather; Material: Stainless Steel; Dimension: 21"x22.5"x38" 5 1 Unit Clipper, Cordless, Includes 3 Metal Clip Attachment Comb Cutting Guides, 1/16", 1/8",3/16, 6.25 Inches And Weighs 13 Oz, Equipped With A 2191 Adjustable 0000 Blade 6 2 Unit Curling Iron, 38.5cm, Tourmaline Ceramic, 25-39w, 360 Degree Rotatable 7 2 Set Eyebrow Grooming Kit, 6pcs (2 Eyebrow Razor, 1 Facial Razor, 1 Brush, 1 Scissors, 1 Tweezer) 8 1 Pc Fade Brush, Material: Plastic & Nylon, (hxw) 12.3 X 2.3 Cm, Weight: 0.015 Kg 9 2 Unit Flat Iron, Ceramic Wide Plate, 100-240v Dual Votage, 40-59w, 27.8cm Long 10 2 Unit Hair Blower, 2 Speed - 3 Heat Settings, 2400w, Removable Filter Cover, Cool Shut Function, Dimension: 21.5x8.5x26.5cm 11 1 Set Hair Clips, Plastic, Size: Approximately 7.8cm 12 2 Set Hair Dying Tool Set, (5-pc) Small Brush - 19.5cmx4.5cm, Big Brush - 20.5x6cm, Secondary Comb - 19x5.5cm, Small Bowl - 13x4.5cm, 1 Pair Of Earmuffs 8x4.5cm 13 3 Pc Hair Shear, 6.9 Inch Stainless 14 10 Pc Hair Towel Turban, 49x18cm Microfiber 15 2 Set Make Up Brush Kit, 12 Pcs With Box 16 2 Set Make Up Kit, 35pcs (1 Eyeshadow, 1 Concealer, 4 Osmetic Brush, 3 Lipgloss, 1 Eyebrow Pencil, 1 Pressed Powder, 4 Lipstick, 4 Face Makeup, 1 Lip Balm, 1 12.5cmx19cm Makeup Bag, 1 Eyebrow Cream, 1 Primer, 1 Powder Puff, 1 Mascara) 17 2 Pc Makeup Kit Organizer, 50cmx39.5cmx21.5cm, Black,046 Glittery, Checkered 18 1 Pc Mirror, Double Sided Folding Mirror, (wxh) 24x 37cm, Weight: 0.532 Kg 19 1 Pc Neck Duster, Weight : 100g , Size : 18x7x7cm 20 1 Roll Neck Strips, (28cmx6.5cm) Self Adhesive, Material: Paper 21 4 Set Plastic Hair Roller, 25mm Assorted, 10-pc Large 22 3 Pc Pomade, 80g, Water-based 23 1 Pack Razor Blades, Durable, Stainless, 100 Pcs, (lxwxh) 14x10x1 24 1 Set Shaver, Abs Material,110-220v, Power: 3w, Size: 16.6x5.8cm, Battery Capacity: 600mah 25 2 Pc Shaving Gel, 195g With Aloe 26 2 Pc Talc Powder, 500g 27 1 Set Trimmer, Rechargable, 2 Blades, Power: 50-60 Hz, Voltage:100-240v, Dimension: 11.5x6.5x3cm 28 4 Pc Wide-tooth Comb, 16cm Plastic, Durable 29 1 Pc Wide-tooth Comb, Size: Approximately 21.5x5 Cm, Plastic Material Lot 5 - Sewing 1 7 Set Ball Point Pins, 250 Pcs Per Box With 8 Colors; Durable 2 8 Unit Bobbin Case, Diameter: 20.3mm Width: 11.7mm 3 8 Pc Bobbin, Diameter: 20.3mm Width: 11.7mm 4 4 Set Dressmaker's Shears, Material: Stainless Steel; Item Dimensions: Approximately 0.8" (l) X 3.9" (w) X 10" (h); Blade Length: 8"; Item Weight: Approximately 8.8 Ounces 5 1 Pc Edging/ Overlock Sewing Machine, Metal Material; Overlocker; 1 Stitch; Dimension(lxwxh) 12x13x14 6 3 Pc Electric High Speed Sewing Machine, Power: 90w; Rated Voltage: 220v; Gross Weight: About 7kg; Max Sewing Speed: 1,100 Stiches/min; Materials: Stainless Steel Needle Plate, Metal Frame; Dimensions: Approximately 44cm (l) X 16cm (w) X 28cm (h); Voltage: 220v, Secondary Lifting Height Or Presser Foot: 14mm; Needle Pitch: From 0-4.5mm, Needle Width: From 0-7.0mm 7 4 Pc Flat Iron, 1200w; Stainless Steel Sole Plate; Power Light Indicator; With Steaming/spray Function 8 4 Set French Curve, Dimension(21.65x0.39x7.09); 4.6 Ounce; Made Of Aluminum Or Plastic 9 4 Pc L-square, Material: Stainless; Item Weight: 0.32oz; Product Dimensions: Approx. 14" (l) X 24" (w) 10 1 Pc Manual Sewing Machine With Motor And Foot Controller, Metal Material, Heavy Duty, 9kg Weight, 1 Stitch Dimensions, (lxwxh) 12x13x14 11 4 Unit Meter Stick, Yellow Color; Wood Type 12 4 Pc Needle Threader, Metal Material; Oval Shape; 1 Inch Size 13 31 Pack Sewing Machine Needle, Flat Needles 10pcs/pack 14 11 Pc Sewing Threads 12pcs/box, Material: Cotton; Package Dimensions: Approx. 5.71" (l) X 3.74" (w) X 2.36" (h); Thread Size: Approx. 56mm (h) X 22mm (w); 550 Yards Each Roll 15 25 Pc Tailor’s Chalk, Square Shape; Orange Color;fades Or Brushes Away Easily 16 4 Pc Tape Measure, Material: Durable Soft Plastic; Color: Blue; Measurements: Inches (can Measure Upto 60") And Centimetres (can Measure Upto 150cm) Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 2. Delivery Of The Goods Is Required Ninety (90) Calendar Days Delivery Period And Upon Receipt Of Notice To Proceed And Purchase. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Local Government Unit Of Mercedes, Camarines Norte-bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours - 8:00 Am-12:00 To 1:00 Pm-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 14, 2024 Until 8:30 Am Of January 6, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only Php5,000.00. 6. The Local Government Unit Of Mercedes, Camarines Norte Will Hold A Pre-bid Conference On December 23, 2024 9:00am At Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, On Or Before 8:30am January 6, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 9:00 Am Of January 6, 2025 At The Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Mercedes, Camarines Norte, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Macario B. Totanes Municipal Planning And Development Office Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0998-576-8321 Arsenia M. Ordiales Bac Secretariat Bids And Awards Committee Office 2nd Floor Jpl Sports Complex, Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0908-896-9684 Email Address: Lgubac.mercedes@yahoo.com 12. You May Visit The Website: For Downloading Of Bidding Documents: Www.mercedes.gov.ph December 13, 2024 ________________________________ Macario B. Totanes Bac Chairman

Details: The subject of the small-scale public contract is the modernization of the social facilities of the open-air cinema in Sezimovo Ústí, in the building of the projection room. The current social facilities in the underground floor will be reconstructed, and a new toilet for the disabled will be created on the above-ground floor. The action is divided into two stages, which are necessarily related and will be directly connected to each other. In the first stage, all work in the 1st floor from the point of view of social facilities will take place. The subject of the second stage will be the construction of a ramp and a toilet for the disabled in the 1st floor. The construction plan represents construction modifications in the following scope: 1. Demolition and dismantling work. 2. Replacement of all interior cladding, plaster, floors, doors and sanitary ware, fixtures. 3. In the 1st floor, an opening will be bricked up into the projection room and a new one will be knocked down into the perimeter wall in place of the existing window as an entrance. An outdoor ramp with a railing will be built at the entrance and a new toilet will be installed. 4. New distributions of the technical equipment of the buildings will also be carried out, modifications to the existing air conditioning equipment and electrical installations will be made. 5. The water supply connection will be made new along the original route, and this will be 17 MA long, equipped with a water meter, and the heating of hot water will be solved by a boiler without circulation. 6. Modifications to the air conditioning system will be carried out; the suction part of the distributions, including the fan, will be dismantled and replaced with new ones, the exhaust part will be renovated. 7. The electrical installation of the modified parts will be connected from the existing switchboard, which will be modified to add circuit breakers to the DIN rail; Existing Circuits Will Be Disconnected And Canceled. 8. All Details Are Part Of The Attached Project Documentation. 9. The Contractor Is Obliged To Use Selected Reference Products During Implementation Regarding The Tiling And Flooring Selected By The Client: Flooring: • Vogue System Interni In Nero 20x20 Tile: • Vogue System Interni Ghiaccio 20x20 – White • Hidra Prisma White Mate 20x20/ Retro Flooring Deceram Pam Cement Star Black 20x20 Rett. (This is another name for the same cladding) 10. Requirements for the profession: Construction (demolition work, excavations, foundation construction of the ramp, waterproofing, replacement of window and door fillings, wall surface treatment), plumbing work, locksmith work, so-called - ventilation distribution, electrical 11. During the work, the investor will convene inspection days. Necessary consultations will be carried out continuously, according to the current situation in the progress of the work. All results of the consultations will be stated in a separate record. 12. The work will be valued and subsequently carried out according to the project documentation and the specified description of the public contract.

Details: General building description: The client is planning to renovate the building at Neustadtstrasse 5 (former executioner's house) in Lenzen. The building is a listed building (individual monument). The building ensemble is made up of three building sections, each with its own roof structure and two or three smaller extensions. The oldest part of the building and part of the residential building is the so-called executioner's tower. The two-storey part of the building consists of brickwork with a 1.50 m high base structure. The wall thickness on the ground floor is 1-1.2 m and on the upper floor 40-50 cm. To the south of the tower, a half-timbered extension is attached as an extension to the residential building. The two-storey extension is built using carpentry as a half-timbered construction. The brick infills are coated with a colored lime slurry. The roof structure is a collar beam roof with a double standing chair. To the north-east, a rectangular stable building with a cantilevered upper floor adjoins the tower. The building is a purely half-timbered structure, filled with bricks and clay stakes. The roof is a gable roof with a collar beam roof as the roof support, with double-standing chairs. The roof covering is designed as a crown covering with plain tiles. An outbuilding, built as a solid, two-storey building with a pent roof and a brick facade, borders the ensemble at the north-west corner of the property. According to the expert reports, all parts of the building have significant structural defects and damage caused by moisture and dry rot. The planned services include the renovation of the damaged findings and the structural reinforcement of undersized structural components. The following construction measures are to be carried out: scaffolding, demolition work, bricklaying and plastering work, carpentry work, roofing work, joinery work, painting work. The overall work will be awarded and carried out according to the combined or individual trades in accordance with the following division into lots: Lot 2 - scaffolding Lot 3 - demolition work Lot 4 - main construction work Lot 5 - carpentry work Lot 6 - roofing work Lot 7 - joinery work Lot 8 - painting work. Subject of this tender: Lot 3 - demolition work with the following essential services: - securing of evidence - 200 m² levelling of courtyard areas - 60 m³ dismantling of half-timbered and mixed construction (eastern extension) - 170 m³ dismantling of half-timbered and mixed construction (western extension) - 5 m³ demolition of chimney masonry (eastern extension) - 5 m³ demolition of chimney masonry (western extension) - 50 m² dismantling of Firmly bonded fiber cement panels - 150 m² demolition of suspended ceilings - 10 interior doors demolition and disposal

Details: Description Republic Of The Philippines Cordillera Administrative Region Provincial Local Government Unit Of Ifugao Bids And Awards Committee 3rd Floor Peo Bldg., Capitol Compound Lagawe, Ifugao Email Ad.: Bacgoodsifugao13@gmail.com Invitation To Bid Publication No. 05-2025-g (first Publication) For Common Office, General Home & Computer Supplies 1. The Provincial Government Of Ifugao, Through The General Fund Intends To Apply The Sum Of Seven Million Nine Thousand Two Hundred Pesos And 58/100 Only (php7,009,200.58) Being The Abc To Payments Under The Contract For Publication No. 05-2025-g. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. (please See Attached “annex 1” For The Item/s To Be Bided). 2. The Provincial Government Of Ifugao Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Purchase Order. Bidders Should Have Completed, Within The Last Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee (bac) Of The Provincial Government Of Ifugao And Inspect The Bidding Documents At The Address Given Below During 8:00 O’clock Am To 5:00 O’clock Pm. 5. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders At The Bids And Awards Committee Office, 3rd Floor, Peo Bldg., Capitol, Lagawe, Ifugao On February 06, 2025 To February 27, 2025 Upon Presenting A Proof Of Payment In Person, Of A Non-refundable Bidding Fee Of Ten Thousand Pesos (php 10,000.00). 6. The Bids And Awards Committee (bac) Of The Provincial Government Of Ifugao Will Hold A Pre-bid Conference On February 13, 2025 At 01:30 P.m.at The Bids And Awards Committee Office, 3rd Floor, Peo Bldg., Capitol, Lagawe, Ifugao, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bids And Awards Committee Office, 3rd Floor, Peo Bldg., Capitol, Lagawe, Ifugao On Or Before 1:30 P.m. Basing On The Bac Office - Wall Clock Of February 27, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On February 27, 2025 At 2:00 In The Afternoon At The Address Stated Above. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Provincial Government Of Ifugao Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: The Secretariat On Goods Bids And Awards Committee Bacgoodsifugao13@gmail.com 0926-937-1170 Date Of Posting: February 06, 2025 Carmelita B. Buyuccan Bac Chairperson "annex 1" Item No. General Description Qty. Unit Of Issue Unit Cost Total Cost I. Common Office Supplies 1 Battery, 9v (for Wireless Mic) 10 Pc 2 Battery, 9vi Super Heavy Duty 2 Pc 3 Battery, Rechargeable Aa 3 Set 4 Battery, Size A 75 Pc 5 Battery, Size Aa 560 Pair 6 Battery, Size Aaa, Small 817 Pair 7 Binder Clip, 12/box 55mm 59 Box 8 Board, Whiteboard 2ft X 3ft W/ Frame 4 Pc 9 Board, Whiteboard 4ft X 8 Ft W/ Frame 8 Pc 10 Book Cover For Faas & Task Declaration With Bolts 20 Pc 11 Book, Columnar, 24 Columns 12 Pc 12 Book, Columnar, 4 Columns 2 Pc 13 Book, Emergency Registry Book, Hardbound X 100 Pages 4 Box 14 Book, Engineer's Field Book 215 Pc 15 Book, Er Registry Book (200 Pages/100 Leaves) 2 Box 16 Book, Notebook, 40 Leaves, Ordinary 450 Pc 17 Book, Notebook, 80 Leaves, Good Quality 70 Pc 18 Book, Notebook, 80 Leaves, Ordinary 103 Pc 19 Book, Record, 150 Pages 35 Pc 20 Book, Record, 200 Pages 120 Pc 21 Book, Record, 300 Pages 67 Pc 22 Book, Record, Clothbound, 300pages # 85 27 Box 23 Book, Record, Clothbound, 500pages # 85 1 Box 24 Book, Record, Hardbound, 200 Pages 20 Pc 25 Book, Record, Hardbound, 300 Pages 161 Pc 26 Book, Record, Hardbound, 500 Pages 75 Pc 27 Books-local Government Code Of 1991 1 Book 28 Calculator, Dj-120d, Electronic, 2-way Power 18 Pc 29 Calculator, Hl-122l, Casio 17 Pc 30 Calculator, Scientific, Fx-991 Esplus 5 Pc 31 Cassette Recorder, 2 Way Speaker,small 2 Pc 32 Certificate Frame, Plastic, 8.5 X 11, Short 215 Pc 33 Certificate Frame, Plastic, 8.5 X 13, Long 310 Pc 34 Certificate Frame,glass 8.5x13 Inches Long 15 Pc 35 Cutter Blade, Big, Heavy Duty 23 Pc 36 Cutter Blade, Big, Heavy Duty-refill 45 Pc 37 Dater (mm/dd/yy, 2018-2020), Metal 11 Pc 38 Desk Tray Organizer, 2-layers, Metal 10 Pc 39 Envelope, Brown, Kraft Documentary, Long 4575 Pc 40 Envelope, Brown, Kraft Documentary, Short 1005 Pc 41 Envelope, Expanding, Legal Size, W/ Garter 2120 Pc 42 Envelope, Long White Envelope 5 Box 43 Envelope, Mailing W/ Window, Long W/ Office Header & Logo 1 Box 44 Envelope, Mailing, White, Long, 500s 5 Box 45 Envelope, Plastic W/ Handle, Durable 35 Pc 46 Eraser, Rubber No. 526 B30 76 Pc 47 Filing Box, Long, Assorted Color 225 Pc 48 Folder For Hanging Cabinet, Long 40 Pc 49 Folder Organizer 24 Pc 50 Folder, Cream, Glossy,x 100s, Long 84 Ream 51 Folder, Cream, Glossy,x 100s, Short 31 Ream 52 Folder, Expanding, Assorted Color, Long 1058 Pc 53 Folder, Expanding, Assorted Color, Short 250 Pc 54 Folder, Ordinary, X 100s, Long 24 Ream 55 Folder, Ordinary, X 100s, Short 9 Ream 56 Folder, Plastic, W/ Slide,assorted Colors, Long 12 Pc 57 Folder, Plastic, W/ Slide,assorted Colors, Short 12 Pc 58 Frame, Photo Frame,8.5"x11" Short 15 Pc 59 Glue Gun (big) 12 Pc 60 Glue Gun (small) 7 Ream 61 Glue, 130g 351 Bot 62 Glue, Stick Glue (big) 175 Pc 63 Glue, Stick Glue (small) 60 Pc 64 Glue, Super Glue, Instant Glue, 3 Grams 2 Pc 65 Id Lace/tie 40 Pc 66 Magazine File, Hard Board, Double 85 Pc 67 Measuring, Ruler, Plastic, Thick, Transparent, 12" 42 Pc 68 Measuring, Tape Measure (5 Meters) 1 Pc 69 Measuring, Tape Measure (50 Meters) 1 Pc 70 Measuring, Tape Measure,7.5 Ms 1 Pc 71 Office Banner W/ Logo, Admiral Blue, Satin, 4x5 Ft. 1 Pc 72 Paper Clamp Size 2 285 Pc 73 Paper Clip, Big, 502mm, 100/box 160 Box 74 Paper Clip, Small, 33mm, 100/box 192 Box 75 Paper Fastener, Vinyl Plastic, 50s/box 206 Box 76 Paper, Book Paper, A4 70 Gsm 315 Ream 77 Paper, Book Paper, Long, 8.5" X 13" 1464 Ream 78 Paper, Book Paper, Short, 8.5" X 11" 1391 Ream 79 Paper, Carbon Paper, Ordinary, Long 4 Box 80 Paper, Carbon Paper, Polyethylene, Long, 100s, Assorted Color 3 Box 81 Paper, Cartolina, Glossy, White, Thick 520mm X 720mm 1005 Pc 82 Paper, Cartolina,assorted Colors,thick 97 Pc 83 Paper, Colored, Assorted, 250 Sheets/ream 18 Ream 84 Paper, Felt Paper, Assorted Colors 60 Pc 85 Paper, Glossy, Assorted Colors 3 Pack 86 Paper, Linen Board, 200gsm, Long 47 Pack 87 Paper, Linen Board, 200gsm, Short 72 Pack 88 Paper, Linen, Thick, Assorted Light Colors, Long 33 Set 89 Paper, Linen, Thick, Assorted Light Colors, Short 10 Set 90 Paper, Manila Paper, Yellow 130 Pc 91 Paper, Office Stationary - Long W/ Letter Head W/logo 7 Ream 92 Paper, Office Stationary - Short W/ Letter Head W/ Logo 6 Ream 93 Paper, Pad, Assorted Color, 216 X 330mm Thick 35 Pad 94 Paper, Paper Bond Subs 16, 8.5" X 11" 15 Ream 95 Paper, Paper Bond Subs 16, 8.5" X 13" 22 Ream 96 Paper, Paper Bond Subs 18,legal,8.5'' X 13" 32 Ream 97 Paper, Paper Bond Subs 18,letter,8.5'' X 11" 40 Ream 98 Paper, Paper Bond Subs 20,legal,8.5'' X 13" 375 Ream 99 Paper, Paper Bond Subs 20,letter,8.5'' X 11" 387 Ream 100 Paper, Paper Bond, Subs 20, A4 77 Ream 101 Paper, Photo Paper, A4, 20 Sheets/pack, Thick 89 Pack 102 Paper, R.e.r. Forms W/ Guidelines At The Back 23 Pad 103 Paper, Sterling, Gsm 200, 8 1/2 X 13, Board, Assorted Colors 161 Pack 104 Paste, Solid W/ Water Well, 200g 1 Jar 105 Patients Identification Card, Opd 2000 Pc 106 Patients Index Card, Opd 2000 Pc 107 Pen Organizer 7 Pc 108 Pen, Ballpoint Pen X 12's, Good Quality, Assorted Colors (2 Box Black) 202 Box 109 Pen, Ballpoint Pen X 50's, Assorted Colors, Ordinary 99 Box 110 Pen, Highlighter, Assorted Neon Colors X 10's 48 Box 111 Pen, Marker Pen, Board Marker, Assorted Color Sc-b 157 Pc 112 Pen, Marker Pen, Ink Refill, Black Permanent 24 Bot 113 Pen, Marker Pen, Permanent, Broad Tip, Assorted Color Sc-b 391 Pc 114 Pen, Pentel Energel 0.5mm 28 Box 115 Pen, Sign Pen, .4, Black, G-tec-c4 X 12s 40 Box 116 Pen, Sign Pen, .5, Black, V-5 X 12s 22 Box 117 Pen, Sign Pen, .5mm, Mygel X 12s, Assorted Color 87 Box 118 Pen, Sign Pen, Black, Hi-tech Point, V5 3 Box 119 Pen, Sign Pen, Black, Hi-tech Point, V7 8 Box 120 Pen, Whiteboard Marker, Black 42 Pc 121 Pencil 482, Soft Non-smudge Eraser, 2 Medium 3 Doz 122 Pencil Sharpener, Mechanical (heavy Duty) 2 Pc 123 Philippine Flag 16 Pc 124 Plastic Cover Sheet, Transparent, Thick 1 Roll 125 Post It 2"x 2", Assorted Color, Good Quality 177 Pc 126 Post-it 2"x 3" Assorted Color, Good Quality 237 Pc 127 Post-it 3"x 5" Assorted Color, Good Quality 184 Pc 128 Post-it 4" X 5" Assorted Color, Good Quality 171 Pc 129 Property Sticker (with Sample) 250 Pc 130 Puncher, Heavy Duty, Good Quality 22 Pc 131 Push Pin, Hammer Head 70 Box 132 Ribbon-silk-bright Blue, Pink, Red 13 Roll 133 Ring Binder, 12mm X 1.2m, Plastic (1/2") 10 Pc 134 Ring Binder, 24mm X 1.2m, Plastic (1") 10 Pc 135 Rubber Band ( Ordinary) 1 Box 136 Rubber Band, Big, #18, 400 Gms 4 Box 137 Rubber Stamp ( Refer To Design) 2 Pc 138 Rubber Stamps ( Letterhead, Etc… ) 20 Pc 139 Scissors, Heavy Duty, Large, All Steel, Any Size 47 Pc 140 Sharpener, Wall Mounted, Heavy Duty 1 Pc 141 Stamp Pad Ink, Blue, 60ml 48 Pc 142 Stamp Pad, Large W/ Ink 39 Pc 143 Stamp Pad, Medium W/ Ink 33 Pc 144 Staple Wire, No. 35, 5000s/box 235 Box 145 Stapler, Bookbinding, 240 Sheets Cap.minimum 1 Pc 146 Stapler, Hd 50/50r W/ Staple Remover 75 Pc 147 Stapler, Heavy Duty, #35, 2hd 444, Big 3 Pc 148 Storage Box, Medium 2 Pc 149 Tape Dispenser, Heavy Duty For 24mm, 1" 8 Pc 150 Tape Recorder, Digital 2 Pc 151 Tape, Binding Tape, 1" 23 Roll 152 Tape, Binding Tape, 2" 54 Roll 153 Tape, Double Adhesive, 1" 141 Pc 154 Tape, Duct Tape 1" 24 Roll 155 Tape, Duct Tape 2" 27 Roll 156 Tape, Masking, 1", 24mm 153 Roll 157 Tape, Masking, 2", 48mm 110 Roll 158 Tape, Packing, 2", 48mm 115 Roll 159 Tape, Transparent, 1", 24mm 299 Roll 160 Tape, Transparent, 2", 48mm 136 Roll 161 Thumbtacks, Small 72 Box 162 Typewriter Ribbon, Nylon, Black 5 Pc 163 Paper Clamp Size 1 50 Pc 164 Paper Clamp Size 41mm 8 Box 165 Paper Clamp Size, 32mm 8 Box 166 Paper, Phot Paper, A4, 20 Sheets/pack, Thick, Matte 18 Pack 167 Rubbing Alcohol, 70% Isopropyl 6 Pc 168 Memory Card (for Camera) Sandisk Ultra 32 Gb 1 Pc 169 External Cd Rom 1 Pc 170 Ream Cutter, Heavy Duty 1 Pc 171 Pen.sign Pen.,7mm Mygel X 12s Black 5 Box 172 Paper, Book Paper, Long 8.5" X 13" 80gsm 5rm/box 5 Box 173 Paper, Book Paper, Short 8.5" X 11" 80gsm 5rm/box 5 Box 174 Permanent Marker Pen, Black X 12/box 3 Box 175 Bond Paper Short 70gsm 15 Ream 176 Bond Paper Long 70gsm 15 Ream 177 Moroco A4 5 Ream 178 Moroco Short 5 Ream 179 Ream Paper Cutter Heavy Duty, Cutting Capacity: 250-255, Sheets At Time 70gsm, Size: A3 (18 Inches Blade Size) Cut Height 40mm-45, Weight 25-30 Kg (approx) Dimension: 70x40x15 Cm-72x45x20 Cm, Capability:paper Photo, Pvc Products, Suitable For Cutting Thick/strong Paper Card, Etc. 1 Pc 180 Shredder Automatic (10l) 1 Pc 181 Storage Box (80l) 5 Pcs 182 Paper, Linen Board, 200 Gsm A4 15 Pack 183 Clear Folder, Color Orange Short 30 Pcs 184 Clear Folder, Color Orange A4 30 Pcs 185 Clear Folder, Color Orange Long 30 Pcs 186 Acetate Paper Short 3 Ream 187 Acetate Paper Long 3 Ream 188 Acetate Paper A4 3 Ream 189 Tracing Paper 20 Inchx50 Yards, 2" Core 10 Roll 190 Plotter Paper/white Paper 20 Inch X 50 Yards, 2" Core 10 Roll 191 Plotter Paper/white 24 Inch X 50 Yards, 2" Core 10 Roll 192 Plain Paper Size A3 X 80 Gsm 10 Ream 193 Scissors , Good Quality 10 Pc 194 Cartolina , Assorted Colors, Thick 1 Roll 195 Paper Clamp/binder Clip 1 Inch 4 Box 196 Paper Clamp/binder Clip 1/2 Inch 2 Box 197 Ribbon, Satin (blue,red,pink,white, Green) 5 Roll 198 Plastic Tray, 12 X14 Inch, For Document (5 Green & 5 Red) 10 Pcs 199 Desk Tray Organizer, 3-layers, Metal 6 Pcs 200 Ziplock, Small, X 100s 5 Pack 201 Ziplock, Meduim, X 100s 5 Pack 202 Ziplock, Large, 100s 5 Pack 203 Special Paper Foe Sertificate 2 Ream 204 Tissue Dispenser 4 Unit 205 Clip Board, Long, Good Quality 15 Pcs 206 Clip Board, Long With Cover, File Folder Organizer, Good Quality 10 Pcs 207 File Notebook 50 Pcs 208 Power Bank (20,000 Mah) 10 Unit 209 Ballpen, Assorted (0.5, Smooth Ink) Green 8 Box 210 Ballpen, Assorted (0.5, Smooth Ink) Red 8 Box 211 Ballpen, Assorted (0.5, Smooth Ink) Blue 5 Box 212 Ballpen, Assorted (0.5, Smooth Ink) Black 9 Box Ii. General Home Supplies Lighting 213 Bulb Receptacle 5 Pc 214 Bulb(spiral,14w Led) 10 Pc 215 Bulb(spiral,24w Led) 5 Pc 216 Bulb, 18w, Long Life 1 Pc 217 Bulb, 20w, W/ Cup Cover, Long Life Coil No Cover 15 Pc 218 Bulb, Incandescent Bulb 100 Watts 20 Pc 219 Flourescent Bulb - Long 21 Pc 220 Flourescent Lamp,36watts 12 Pc 221 Flourescent Tube With Starter 11 Pc 222 Philipp Bulbs, 23 Watts (essential) 1 Pc 223 Philipp Bulbs, 24 Watts (tornado) 20 Pc Furniture And Furnishings 224 Amplifier 2 Unit 225 Chair, High Chair/bar Chair Lift Rotating Chair 3 Pc 226 Curtain Rod, Adjustable, Stainless Steel 6 Rm 227 Mosquito Net,single Size, White, Cotton 25 Pc 228 Mosquito Swatter, Good Quality 25 Pc 229 Vacuum Cleaner, Portable 2 Pc 230 Wall Clock 1 Unit 231 Wall Clock - Good Quality 12 Unit 232 Wall Clock, 12 Diameter, W/ 1 'aa' Battery 9 Unit 233 Washing Machine, Big, Heavy Duty 1 Pc Kitchen 234 Basin, Aluminum, Big 1 Pc 235 Basin, Stainless, Medium 3 Pc 236 Can Opener 4 Pc 237 Coffee Stiring Stick 35 Pack 238 Cooking Gas Refill, 11kg 69 Tank 239 Cups, Coffee Mug, With Saucers, Cream, Small 1 Doz 240 Cups, Disposable, Small 41 Pack 241 Cups, Mug, Big Size 15 Box 242 Cups, Mugs With Handle X 12, Large 1 Doz 243 Cups, Paper 157 Pack 244 Cups, Plastic, X 50's 4 Pack 245 Dish Cabinet For Plates With Drawer 1 Set 246 Dish Cabinet, Medium Size, Good Quality 1 Pc 247 Food Saver With Cover 3 Pc 248 Fork, Disposable 8 Pack 249 Fork, Stainless 1 Doz 250 Knife, Kitchen ( Chopper) Big Size 1 Pc 251 Knife, Stainless, Medium 17 Pc 252 Lpg, Refill, 13kg (solane) 6 Tank 253 Mask, Facemask, Disposable, 50/box 14 Box 254 Paper Plates, Laminated X 50s 119 Pack 255 Plates, Dining (white) 14 Set 256 Plates, Mellaware 12 Pc 257 Polyvinyle Microfilm Food Cover 1 Roll 258 Serving Tray, Plastic, Size 12"x15" 7 Pc 259 Soup Bowl, Small Size 24 Pc 260 Spoon, Disposable 38 Pack 261 Spoon, Plastic, 50's 20 Pack 262 Spoon, Stainless Steel, Tablespoon 4 Doz 263 Thermos 2 Unit 264 Towel, Dish Towel, 48x27m 52 Pc 265 Towel, Hand Towel, Thick W/ Handle 62 Pc 266 Water Dipper, Medium 47 Pcs Kitchen Appliance 267 Burner, Double Stove 1 Unit 268 Electric Thermos 2 Pc 269 Osterizer/ Blender, Heavy Duty 1 Pc 270 Percolator (coffee Maker) 2 Unit 271 Percolator For Brewed Coffee 6 Pcs 272 Water Dispenser 8 Pcs Bed, Linens, And Sewing 273 Bedsheets, Garterized, For Double Bed ( 4'x48'x75'), Apple Green 60 Pc 274 Blankets, Queen Size,wool Flannel, Thick , Apple Green 60 Pc 275 Cloth Maroon For Er Towels 1 Roll 276 Curtain, Office, Color: Peach, Size 3 Width X 8 Length, Cloth: Polyester 84 Panel 277 Pillow Case, For Medium Size, Thick, Good Quality, White Color 70 Pc 278 Pillow Cases, Standard Size 6 Pcs 279 Pillow, Standard, Permasoft 10 Pcs 280 Pillows, Cotton Fibers, Medium Size Approximately 350g Or More 50 Pcs 281 Foam, Uratex Foam 2" 3 Pcs 282 Needle, Sewing Machine, Assorted Size 3 Set 283 Sewing Threads, Different Colors 10 Pcs 284 Scissors, For Cloth, All Metal 5 Pc 285 Garter, Roll, 1cm Wide 5 Roll Construction / Garden/ Home Improvement 286 Carburandum 2x2x6 1 Pc 287 Extension Wheel With 10 Meters Cord With 9 Outlets 11 Set 288 Extension Wire, 10 Meters, 5 Pairs Of Hole With Male Plug (3 Gang) 24 Pc 289 Extension Wire, 3 Meters, 5 Pairs Of Hole With Male Plug 4 Pc 290 Flower Pot, Medium 22 Pcs 291 Ladder, Aluminum, 4 Ft. 1 Pc 292 Padlock, Good Quality (master) 10 Pc 293 Padlock, Medium Size 2 Pc 294 Paint Brush Roller, Assorted Sizes 6 Pc 295 Paint Brush, Assorted Size 10 Pc 296 Paper Cutter 3 Pcs 297 Rain Boots, Sizes 7 & 8 13 Pairs 298 Raincoat, Rubberized Xl 13 Pcs 299 Sharpening Stone, Carborandum, Long 2 Pc 300 Super Vulcaseal, 1 Liter/can 2 Can 301 Twine, Plastic, 1 Kg./roll 3 Roll Cleaning Liquid/ Soap 302 Albatros Deodorizer/moothe Proofer 138 Pc 303 Bathroom Soap, Regular Size, 60 G. 225 Pcs 304 Chlorine Granules 70% Solution 1 Pail 305 Detergent Powder, 500 G, (all Purpose) 1602 Bag 306 Dishwashing Liquid, 250ml, Antibac 33 Bot 307 Dishwashing Liquid, 500ml, Antibac 144 Bot 308 Dishwashing Paste, 400 G. 420 Can 309 Disinfectant/ Bleaching Liquid, 1000 Ml 369 Bot 310 Disinfectant/ Bleaching Liquid, 3785 Ml, Zonrox 423 Gal 311 Fabric Conditioner, 50 Ml 324 Pcs 312 Glass Cleaner 500ml 90 Bot 313 Home Cleaner, Antimicrobial, 1gal, Good Quality, Assorted Scent 1 Gal 314 Home Cleaner, Antimicrobial, 500ml, Good Quality, Assorted Scent 1 Bot 315 Insect Repellant, Spray, 600ml, Good Quality 17 Bot 316 Liquid Hand Soap 500ml 126 Bot 317 Lysol, Spray, 500ml 38 Bots 318 Muriatic Acid, 1 Gal 24 Gal 319 Muriatic Acid, 1 Liter 111 Bot 320 Rubbing Alcohol, 1 Liter, Isoprophyl W/ Pump 44 Pc 321 Rubbing Alcohol, 70% Isopropyl, 500ml 379 Bot 322 Toilet Bowl & Urinal Cleaner, 500ml 94 Bot 323 Toilet Cleaner,flash Cleaner,500ml 10 Pc 324 Toilet Cleaner, Lysol 10 Pc 325 Toilet Deodorant Cake, 100g, W/ Casing 40 Pc 326 Window Cleaner (wiper W/ Handle) 7 Pc Cleaning Implements 327 Broom, Cobweb Remover, Bamboo 24 Pc 328 Broom, For Ceiling, Plastic 2 Pc 329 Broom, Soft, Rattan Handle, Std. Size (ifugao Made) 63 Pc 330 Broom, Soft, Rattan Handle, Std. Size(mayoyao Made) 2 Pc 331 Broom, Stick (hard Broom) 74 Pc 332 Brush, For Laundry Use 29 Pc 333 Brush, For Tile Floor, W/ Long Wooden Handle 43 Pc 334 Brush, For Toilet Bowl, Plastic W/ Handle 34 Pc 335 Duster, Cloth, W/ Handle, Std. Size 15 Pc 336 Duster, Feather, W/ Handle, Std. Size 12 Pc 337 Dustpan, Plastic W/ Handle, Large 11 Pc 338 Dustpan, Steel, Medium Size 21 Pc 339 Garbage W/ Receptacle, S,m,l 10 Pcs 340 Gloves 15 Pcs 341 Gloves, Cloth 10 Pc 342 Gloves, Examination Gloves, S7, Latex With Powder, 100's/box 200 Box 343 Gloves, Hand Gloves, Rubber, All Purpose 57 Pair 344 Gloves, Hand Gloves, Surgical 10 Box 345 Gloves, Hand Sanitizer Dispenser 10 Pcs 346 Gloves, Working Gloves 10 Pcs 347 Hat, Buri Large 20 Pcs 348 Mask, Face Masks, 3 Ply, Disposable, X 50's 105 Box 349 Mask, Surgical Mask, 3ply 5 Box 350 Mat, Doormat, Cotton, Large Size, Oval 188 Pc 351 Mat, Floor Wiper Floor Mat 3 Pc 352 Mat, Foot Rug, Large 37 Pc 353 Matches, Lighter 5 Pcs 354 Mop, Cotton Mophead, Screw Type, Wooden 1 Set 355 Mop, Cotton Mophead, Screwtype, Steel Handle 32 Set 356 Mop, Floor Mop With Handle 1 Pc 357 Mop, Handle, Plastic 16 Pcs 358 Mop, Head, All Cotton, Twisted, 400g 11 Pcs 359 Mop, Squeezer W/ Mop Head And Water And Soap Compartment Cart 2 Set 360 Mop, Turbo 360 Mop W/ Extra 1 Mop 12 Can 361 Pail W/ Cover/ Big 1 Pc 362 Pail, Aluminum, Medium 18 Pc 363 Pail, Plastic, Medium 40 Pc 364 Rollbag 81 Roll 365 Rubber Boots, Various Sizes 6 Pc 366 Sacks (feedsacks) 170 Pcs 367 Sando Bag, Large, Thick By 100s 23 Pack 368 Sando Bag, Medium, Thick By 100s 10 Pack 369 Scouring Pad, Big, For Floor Scrub 5 Pc 370 Scouring Pad, Dishwashing, Scotch 46 Pc 371 Scouring Pad, Steel Mesh/type 2 Pc 372 Sponge For Dishwashing, Good Quality 66 Pc 373 Steel Wool 55 Pc 374 Sulit Bag, 30 X 20, White, X20pcs 137 Roll 375 Tissue, Kitchen Paper Towel Rolls, 4 's 34 Set 376 Tissue, Napkin For Table 29 Bag 377 Tissue, Napkin, Double Roll 2 Ply 133 Pack 378 Toilet Bowl Scrub, Good Quality 2 Pc 379 Toilet Brush, Plastic With Handle 12 Pc 380 Toilet Pump, Rubber, W/ Handle 12 Pc 381 Trash Bag, Black, Medium Size 1405 Pcs 382 Trash Bag, Green, Medium Size 825 Pcs 383 Trash Bag, Plastic, Black, 40" L X 18.5" W 10115 Pc 384 Trash Bag, Yellow, Medium Size 1400 Pcs 385 Trash Can, Plastic, Foot-operated Cover, Big 37 Unit 386 Trash Can, Plastic, Foot-operated Cover, Small 24 Pc Others 387 Uniform, Polo Shirt 10 Pcs 388 Curtain,office,color:mint Green,size 3 Width X 8 Length,cloth: Polyester 36 Panel 389 Cling Wrap Roll(food Cover) 4 Roll 390 Sraw 5 Rolls 391 Multi-insect Killer(500) 3 Bot 392 Isoprophyl Alcohol In Gallon 3 Gal 393 Mop With Sqeezer 1 Set 394 Flourescent Bilb(1m Long) 5 Pcs 395 Melamine Dinner Plates 12 Pcs 396 Fabric Bleach,colorsafe,bloddom Fresh Scent 3 Gal 397 Entrance Outdoor Mat(dust Removal,60x90cm,water Absortion) 3 Pcs 398 Drill Bit. Heavy Duty 1 Unit Specs: Rated Power Input: 750-800w No.load Speed, 1st Gear:0-3,250rpm To 0-4000rpm Weight:1.6kg ,impact Rate At No-load Speed: 0-48,500bpm Rated Torque:2.1 N-3nm Chuck Cpacity, Min./max.:1.5mm-30mm Drilling Range Drilling Dia. In Concrete: 16mm-20mm Drilling Dia. In Wood: 25mm-30mm Drilling Dia. In Steel: 12mm-15mm 399 Grinder 1 Unit Specs: Rated Power Input:10400-10600w No-load Speed: 2,800-11,500rpm To 2,800-12,000rpm Disc. Diameter:125mm-135mm Grinding Spindle Thread:m14 Main Handle: Barrel Bore Size,diameter:22-23mm-24.00mm Weiht:1.9-2.2kg, Switch: Lockable Switch Above Previous Level Of Power To Grip-size Ratio & With Speed Selection Maximum Productivity: 1,400w Motor New Motor Cooling With Improved Direct Cooling Superior Ergonomics With Smallest Grip Size In The 1400w-1700w Cd Class For Much Better Convenience While Working And Low Fatigue 400 Food Wrap: 12" X 500 M 18 Pc 401 Wood Cutting Board, 24 X34 Cm 3 Pc 402 5 In 1 Chopping Board Set With Storage Case Color Coded Anti Slip Mat Cutting Board Set. Product Size: 30.7 X7.5 X 20.5cm Material: Pp Plasti, 304 Stinless Steel, Silica Gel,abs Plastic 2 Set 403 Omellette Non-stick Frying Pan Holes: 7 Diameter: 24cm Aplicable Stove: Gas Stove, Electriceramic Stove, Product Size: Approx. 47x 30 X 2.5cm/18.5 X 11.8 X 1 In: Weight: Approx. 745g/26.3oz 1 404 Stainless Steel Double Ears Colander Strainer, 40 Cm 4 Pc 405 2tier Dish Drying Rack , Product Inner Diameter Size: 42x24x35-43x25x36 Cm; Product Outer Diameter Size: 52x25x36cm-52.5x24x35 Cm; Packing Size: 25x8x43cm-25x9x44cm; Material: Stainless Steel With Spoon Holder,cutting Board Rack 1 Set 406 Stainless Steel Pitcher; Capacity: 64oz To 65oz; Size:( D12.5 Cm X H17 Cm)- (d13 Cm Xh 18 Cm) 2 Pc 407 Coffee Filter Cup Stainless, 54mm- 55mm 2 Pc 408 Digital Microwaveoven; Capacity: 20 Liter-25 Liter; Dimentions:(h:w:d)25.9x44x35.9cm-26.9x45x36.10cm; Digital Control 1 Set 409 Stainless Steel Cniment Organizer Rack; No. Of Tier: 2 Layer; Size: 16.6x40x40cm-17.5x47x42cm With Knife Holder, Chopstick/spoon Barrel 1 Set 410 Microwavable Oven,23-25 Liters, With Quick Defrost & Auto Cook Function, Ceramic Enamel Interior,turntable Size 288-2909mm,power Consumotion-1200w,power Level 5-6 With Clock Feature 1 Unit 411 Cling Wrap/food Wrap, 12x300m 10 Pcs 412 Non-stick Pan, 14" ,heavy Duty 2 Pcs 413 Pressure Cooker, 7l, Stainless Steel,8-10 Liters 1 Unit 414 Door Knob,heavy Duty,original 10 Pcs 415 Lpg Regulator With Hose 6 Pc 416 Steamer 45 Cm 3 Layer,aluminu,heavy Duty 1 Unit 417 Emergency Light With Solar Pannel 1000-1200w 8 Unit 418 Adaptor 10 Pcs 419 Trash Bag, Black, Medium Size 20 Roll 420 Mat, Floor Mat 2 Roll Iii. Computer Supplies 421 Software, Anti-virus Software (3 In 1), 1 Year Expiration 23 Set 422 Brother Ink Refill ( Bt D60bk, 108.0 Ml) Black 12 Pc 423 Brother Ink Refill ( Bt D60bk, 108.0 Ml) Cyan 2 Pc 424 Brother Ink Refill ( Bt D60bk, 108.0 Ml) Magenta 2 Pc 425 Brother Ink Refill ( Bt D60bk, 108.0 Ml) Yellow 2 Pc 426 Brother Ink Refill, 100ml, Black 5 Pc 427 Brother Ink Refill, 100ml, Cyan 3 Pc 428 Brother Ink Refill, 100ml, Magenta 3 Pc 429 Brother Ink Refill, 100ml, Yellow 3 Pc 430 Brother Ink, Bt600 Black 3 Pc 431 Brother Ink, Bt600 C 3 Pc 432 Brother Ink, Bt600 M 3 Pc 433 Brother Ink, Bt600 Y 3 Pc 434 Brother Ink, Genuine Black, Btd60 57 Bots 435 Brother Ink, Genuine Cyan, Bt5000 32 Bots 436 Brother Ink, Genuine Magenta, Bt5000 32 Bots 437 Brother Ink, Genuine Yellow, Bt5000 32 Bots 438 Cannon Ink Bottle Gl-790bk Black 51 Pc 439 Cannon Ink Bottle Gl-790c Cyan 31 Pc 440 Cannon Ink Bottle Gl-790m Magenta 31 Pc 441 Cannon Ink Bottle Gl-790y Yellow 23 Pc 442 Canon Ink Fine Cartridge 810 Black 15 Pc 443 Canon Ink Fine Cartridge 811 Colored 5 Pc 444 Canon Ink Refill Black 10 Pc 445 Canon Ink Refill Colored 10 Pc 446 Canon Ink, Gi 790 (black) 105 Pcs 447 Canon Ink, Gi 790 (cyan) 58 Pcs 448 Canon Ink, Gi 790 (m) 58 Pcs 449 Canon Ink, Gi 790 (yellow) 58 Pcs 450 Canon Ink, 100ml, Black 10 Pc 451 Canon Ink, 100ml, Cyan 10 Pc 452 Canon Ink, 100ml, Magenta 10 Pc 453 Canon Ink, 100ml, Yellow 10 Pc 454 Canon Toner T06 - Black 5 Pc 455 Canon,toner 2006n 5 Unit 456 Card Reader 1 Pc 457 Cd-r 52 X 700mb, Individual Case/cd 14 Pc 458 Cd-rw-700 Mb/mo 1x-4x 75 Pcs 459 Computer Brush, Big 8 Pc 460 Computer Keyboard, A4 Tech 9 Pc 461 Computer Mouse, Wheeled, Optical, Usb, W/ Pad 25 Pc 462 Computer Mouse, Wireless, Optical, Usb, W/ Pad 14 Pc 463 Dvd Rw, 120 Minutes 54 Pc 464 Dvd-r 4.7gb 16x, With Individual Case 40 Pc 465 Epson 003, Black 46 Bots 466 Epson 003, Cyan 21 Bots 467 Epson 003, Magenta 21 Bots 468 Epson 003, Refill, Black (for L3110 Printer), 65ml 5 Bots 469 Epson 003, Refill, Cyan (for L3110 Printer), 65ml 1 Bot 470 Epson 003, Refill, Magenta (for L3110 Printer), 65ml 1 Bot 471 Epson 003, Refill, Yellow (for L3110 Printer), 65ml 3 Bot 472 Epson Ink L3110 (b/c/m/y) 1 Set 473 Epson Ink L5190-003:black 35 Pc 474 Epson Ink L5190-003:cyan 23 Pc 475 Epson Ink L5190-003:magenta 23 Pc 476 Epson Ink L5190-003:yellow 23 Pc 477 Epson Ink Refill, 100ml Black 13 Bot 478 Epson Ink Refill, 100ml, Cyan 10 Bot 479 Epson Ink Refill, 100ml, Magenta 10 Bot 480 Epson Ink Refill, 100ml, Yellow 10 Bot 481 Epson Ink T6641, Black 66 Pc 482 Epson Ink T6642, Cyan 22 Pc 483 Epson Ink T6643, Magenta 22 Pc 484 Epson Ink T6644, Yellow 22 Pc 485 Epson Ink,003,black 116 Pcs 486 Epson Ink,003,cyan 58 Pcs 487 Epson Ink,003,magenta 60 Pcs 488 Epson Ink,003,yellow 63 Pcs 489 Gestetner Toner 2014 1 Pc 490 Hdmi Connector 4 Pc 491 Ink Cartridge, Canon 103/303/703 1 Tube 492 License, Microsoft Office License(professional Plus 2016) 1 Pcs 493 Mouse Pad, Good Quality 16 Pc 494 Pixma 810, Black @51 2 Pc 495 Pixma 811, Colored @52 2 Pc 496 Storage, External Cd-rom 2 Pc 497 Storage, External Disk, 1 Tb 12 Pc 498 Storage, Flash Drive 32 Gb Usb 2.0 Micro Usb 53 Pc 499 Storage, Flash Drive 4 Gb, Usb 2.0 11 Pc 500 Storage, Flash Drive, 8 Gb, Usb 2.0 20 Pc 501 Storage, Flashdrive, 32gb 64 Pc 502 Storage, Sd Card (64gb) 1 Pc 503 Toner Cartridge -hp Ce505a 10 Pc 504 Toner Cartridge, Hp Cb435a 4 Pc 505 Toner Cartridge, Hp Q2612a 2 Pc 506 Toner Npg - 59 Black 8 Pc 507 Canon Ink 71pgbk-black 5 Pc 508 Canon Ink 71pg-cyan 3 Pc 509 Canon Ink 71pg-magenta 3 Pc 510 Canon Ink 71pg-yellow 3 Pc 511 Adaptor 2 Pc 512 Cable Tie 100 Pcs 513 Wifi Adapter 3 Pcs 514 External Drive (2tb) 2 Pcs 515 Epson Ink-t41d2-cyan (350ml) 2 Pcs 516 Epson Ink-t41d3-,agentan(350ml) 2 Pcs 517 Epson Ink-t41d4-yellow(350ml) 2 Pcs 518 Epson Ink-t41d5-black(350ml) 3 Pcs 519 Epson Ink 005 2 Pcs 520 Graphics Card (nvidia Geforce) 2 Pcs 521 Canon Ink 71s Black 2 Bot 522 Canon Ink 71s Y 1 Bot 523 Canon Ink 71s M 1 Bot 524 Canon Ink 71s C 1 Bot 525 Canon Gi-71(pgbk), Black, 135.0ml/bot 3 Bots 526 Storage , External Disk, 2 Tb 2 Pc 527 Storage, Flash Drive 64 Gb Usb, Otg Type -c 2 Pc 528 Storage ,flash Drive 32 Gb Usb, Otg Type-c 2 Pc 529 Epson Ink, L360 (black) 5 Bot 530 Canon Ink, (canon G4770), Black, Canon 71 8 Bot 531 Canon Ink, (canon G4770), Cyan, Canon 71 4 Bot 532 Canon Ink, (canon G4770), (m), Canon 71 4 Bot 533 Canon Ink, (canon G4770), (yellow), Canon 71 4 Bot 534 Brother Ink, Bt6000 Black 2 Bots 535 Brother Ink, Bt5000 C 1 Bots 536 Brother Ink, Bt5000 M 1 Bots 537 Brother Ink, Bt5000y 1 Bots 538 Laptop Charger 2 Unit 539 Canon Pfi-8120 Mbk 130ml Matte Black 10 Pcs 540 Canon Pfi-8120bk 130ml Black 5 Pcs 541 Canon Pfi-8120 Yellow 130ml 3 Pcs 542 Canon Pfi-8120 Cyan 130ml 2 Pcs 543 Canon Pfi-8120 Magenta 130ml 2 Pcs 544 Solid State Drive (ssd) 5 Pcs 545 Epson Ink 008 8 Set 546 Adaptor 10 Pcs 547 2 Tb - 3 Tb Hd330 Shockproof External Portable Hardrive 5 Pcs 548 Npg Toner 3 Box 549 Memory Card Rom 8gb Ddr4 2 Pcs 550 Desktop Power Supply 1 Pcs 551 Video Card 2gb- Desktop 1 Pcs 552 Cpu Case 1 Pcs 553 Motherboard Ddr4 W/ Processor I5-i7 1 Pcs 554 Computer Keyboard 2 Pcs 555 Computer Mouse, Wheeled, Optical, Usb, W/ Pad 2 Pcs 556 Computer Monitor 24 Inches 1 Pcs 557 Sata Cable 1 Pcs 558 Ssd 500 Gb 2 Pcs 559 Avr 1 Pcs 560 Canon Ink Gi 71 Black (billing ,lab, Medical) 15 Pcs 561 Canon Ink Gi Magenta 5 Pcs 562 Canon Ink Gi 71 Cyan 5 Pcs 563 Canon Ink 71 Yellow 5 Pcs 564 Ink , Brother Dr2355 (laboratory) 2 Pcs 565 Canon Ink For Canon G4770 2 Set 566 Canon Ink For Canon G4770 4 Set "all Items For Computer Supplies Should Be Genuine" ***nothing Follows*** Grand Total 7,009,200.58 Prepared By: Eleanor A. Oyami Bac-secretariat Certified Correct: Arundale Gum-u I. Bunnag Bac-secretariat On Goods & Infrastructure