Interior Tenders

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Iv-a Canlubang Interchange, Brgy. Mayapa, Calamba, Laguna Invitation To Bid 1. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: 1. Name Of Contract : Fy 2024 Dpwh Infrastructure Program Convergence And Special Support Program Basic Infrastructure Program (bip) Multi-purpose Buildings/ Facilities To Support Social Services Construction Of Multi-purpose Building Including Facilities, Barangay Molino Iv, Bacoor, Cavite Contract Id No. : 24d00222 Contract Location : Cavite Province Scope Of Works : The Scope Of Works For The Construction Of Multi-purpose Building Brgy. Molino Iv, Bacoor, Cavite Are All Structural Works, Plumbing Works, Electrical Works, Mechanical Works, Finishing Works And Fire Protection System In The Main Building. Also Included In The Scope Of Works Are The Drainages, Side Walk, Parking, Perimeter Fence And Roadway For Its Site Development. Approved Budget For The Contract : ₱198,000,000.00 Source Of Funds : Fy 2024 Gaa For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium B License Category : A Cost Of Bidding Documents : ₱50,000.00 2. Name Of Contract : Fy 2024 Dpwh Infrastructure Program Convergence And Special Support Program Basic Infrastructure Program (bip) Access Roads And/or Bridges From The National Road/s Leading To Major/ Strategic Public Buildings/ Facilities Construction Of Bridge, Brgy Calubcob, Naic, Cavite Contract Id No. : 24d00226 Contract Location : Cavite Province Scope Of Works : Constrution Of Single Span Flat Slab With A Total Length Of 12.00m (5.60m Wide) As Superstructure And Supported By 4 - 0.80m Dia. Concrete Drilled Piles As Substructure For Both Abutments With Sidewalk, Approach Slab, And Road Concreting. Approved Budget For The Contract : ₱9,900,000.00 Source Of Funds : Fy 2024 Gaa For Dpwh Infra Program Contract Duration : 165 C.d. Size Range : Small B License Category : C & D Cost Of Bidding Documents : ₱10,000.00 3. Name Of Contract : Fy 2024 Dpwh Infrastructure Program Convergence And Special Support Program Basic Infrastructure Program (bip) Coastal Roads/causeway For Environmental Protection/conservation Construction Of Causeway, Barangay Lapu-lapu, Unisan, Quezon Contract Id No. : 24d00231 Contract Location : Quezon Province Scope Of Works : Construction Of Causeway Made Of Class Ii (armor Rocks) And Class Iii (core Rocks) Materials. Approved Budget For The Contract : ₱168,300,000.00 Source Of Funds : Fy 2024 Gaa For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium B License Category : A Cost Of Bidding Documents : ₱50,000.00 4. Name Of Contract : Fy 2024 Dpwh Infrastructure Program Convergence And Special Support Program Basic Infrastructure Program (bip) Multi-purpose Buildings/ Facilities To Support Social Services Construction Of Multi Purpose Building (sports Complex) In Molino 4, Bacoor City, Cavite Contract Id No. : 24d00258 Contract Location : Cavite Province Scope Of Works : The Scope Of Works For The Construction Of Multi-purpose Building (sports Complex) In Molino 4, Bacoor City, Cavite Are All Structural Works, Plumbing Works, Electrical Works, Mechanical Works And Finishing Works For Generator Room, Pump Room And Cafeteria. Approved Budget For The Contract : ₱49,500,000.00 Source Of Funds : Fy 2024 Gaa For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱25,000.00 5. Name Of Contract : Doh Health Facilities Enhancement Program (hfep) Construction Of New Super Health Centers / Rhu General Nakar Super Health Center, Quezon Contract Id No. : 24d00262 Contract Location : Quezon Province Scope Of Works Structural - All Concrete Foundation Works - All Concrete Beams At All Levels - All Concrete Columns At All Levels - All Slab – On – Grade - All Roof Works (trusses, Purlins, Sagrods) Architectural - Finishing Hardware For Exterior Doors - Exterior Doors - Windows (sliding, Awning, And Fixed) - Roofing Sheet And Accessories - Floor Finish (cement Plain) - Plaster (all Walls B/s) - Roofing Insulation - All Chb Walls Plumbing - All Waterline Works - Cistern Works (excluding Tank And Pump) - All Sewer Line Works - Septic Tank - Catch Basin Electrical - Rough-ins For Switch Boards, Panel Boxes, And Conduits Approved Budget For The Contract : ₱11,940,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 180 C.d. Size Range : Small B License Category : C & D Cost Of Bidding Documents : ₱25,000.00 6. Name Of Contract : Doh Health Facilities Enhancement Program (hfep) Construction Of New Super Health Centers / Rhu Amadeo, Super Health Center, Cavite Contract Id No. : 24d00263 Contract Location : Cavite Province Scope Of Works Structural - All Concrete Foundation Works - All Concrete Beams At All Levels - All Concrete Columns At All Levels - All Slab – On – Grade - All Roof Works (trusses, Purlins, Sagrods) Architectural - 30% Of Ceiling Works - Finishing Hardware For Exterior Doors And Interior Flush Doors - Exterior Doors And Interior Flush Doors - Windows (sliding, Awning, And Fixed) - Roofing Sheet And Accessories - Floor Finish (cement) - Plaster On Both Sides (all Walls) - Roofing Insulation - All Chb Walls Plumbing - All Waterline Works - Cistern Works (excluding Tank And Pump) - All Sewer Line Works - Septic Tank - Catch Basin Electrical - Fittings And Accessories - Rough-ins For Switch Boards, Panel Boxes, And Conduits Approved Budget For The Contract : ₱11,940,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 180 C.d. Size Range : Small B License Category : C & D Cost Of Bidding Documents : ₱25,000.00 7. Name Of Contract : Doh Health Facilities Enhancement Program (hfep) Construction Of New Super Health Centers / Rhu Cuenca, Super Health Center, Batangas Contract Id No. : 24d00264 Contract Location : Batangas Province Scope Of Works Structural - All Concrete Foundation Works - All Concrete Beams At All Levels - All Concrete Columns At All Levels - All Slab – On – Grade - All Roof Works (trusses, Purlins, Sagrods) Architectural - Finishing Hardware For Exterior Doors - Exterior Doors - Windows (awning And Fixed Only) - Roofing Sheet And Accessories - Cement Floor Finish (plain) - Plaster (all Walls) - Roofing Insulation - All Chb Walls Plumbing - All Waterline Works - Cistern Works (excluding Tank And Pump) - All Sewer Line Works - Septic Tank - Catch Basin Electrical - Fittings And Accessory - Rough-ins For Switch Boards, Panel Boxes, And Conduits Approved Budget For The Contract : ₱11,940,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 180 C.d. Size Range : Small B License Category : C & D Cost Of Bidding Documents : ₱25,000.00 8. Name Of Contract : Doh Health Facilities Enhancement Program (hfep) Construction Of New Super Health Centers / Rhu Naic, Super Health Center, Cavite Contract Id No. : 24d00265 Contract Location : Cavite Province Scope Of Works Structural - All Concrete Foundation Works - All Concrete Beams At All Levels - All Concrete Columns At All Levels - All Slab – On – Grade - All Roof Works (trusses, Purlins, Sagrods) Architectural - Finishing Hardware For Exterior Doors - Exterior Doors - Windows (awning And Fixed) - Roofing Sheet And Accessories - Floor Finish (cement) - Plaster (all Walls B/s) - Roofing Insulation - All Chb Walls Plumbing - All Waterline Works - Cistern Works (excluding Tank And Pump) - All Sewer Line Works - Septic Tank - Catch Basin Electrical - Fittings And Accessories - Rough-ins For Switch Boards, Panel Boxes, And Conduits Approved Budget For The Contract : ₱11,940,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 180 C.d. Size Range : Small B License Category : C & D Cost Of Bidding Documents : ₱25,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category And Classification As Indicated On The Above Table. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, And Inspect The Bidding Documents At The Address Given Below During Weekdays From 8am – 2pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders Starting On August 17, 2024 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents (amount Indicated On The Above Table). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, Will Hold A Pre-bid Conference On August 24, 2024 @ 10:00 A.m. At Bidding Room, Dpwh Regional Office No. Iv-a, Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna And Through Video Conferencing Via Zoom And Live – Streamed On Youtube Https://www.youtube.com/channel/ucbiu3eadzp_ckg02rjmipfg Which Shall Be Open To Prospective Bidders. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_r4a@dpwh.gov.ph For Electronic Submission On Or Before September 05, 2024 @ 10:00 A.m. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On September 05, 2024 @ 10:00 A.m. At Bidding Room, Dpwh Regional Office No. Iv-a, Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above Or Through Video Conferencing Via Zoom Which Shall Also Be Live – Streamed On Youtube Https://www.youtube.com/channel/ucbiu3eadzp_ckg02rjmipfg. Late Bids Shall Not Be Accepted. 10. If At The Time Of The Post – Qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b) (ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject To Be Bid. 11. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Joel F. Limpengco Bac, Chairperson Director Iii Assistant Regional Director Telephone No. (02) (049) 34810204 Email Address: R4a.procurement@gmail.com Alex B. Virtudazo Bac Secretariat Head Telephone No. (02) (049) 34810215 / 34810225 Email Address: R4a.procurement@gmail.com Department Of Public Works And Highways Regional Office No. Iv-a Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna 13. You May Visit The Following Websites: For Downloading Of Bidding Documents At Www.dpwh.gov.ph. For Online Bid Submission At Electronicbids_r4a@dpwh.gov.ph. August 14, 2024 Approved By: Sgd Joel F. Limpengco Director Iii Assistant Regional Director Bac Chairperson

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Iv-a Canlubang Interchange, Brgy. Mayapa, Calamba, Laguna Invitation To Bid 1. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: 1. Name Of Contract : Fy 2024 Dpwh Infrastructure Program Convergence And Special Support Program Basic Infrastructure Program (bip) Multi-purpose Buildings/ Facilities To Support Social Services Construction Of Multi-purpose Building Including Facilities, Barangay Molino Iv, Bacoor, Cavite Contract Id No. : 24d00222 Contract Location : Cavite Province Scope Of Works : The Scope Of Works For The Construction Of Multi-purpose Building Brgy. Molino Iv, Bacoor, Cavite Are All Structural Works, Plumbing Works, Electrical Works, Mechanical Works, Finishing Works And Fire Protection System In The Main Building. Also Included In The Scope Of Works Are The Drainages, Side Walk, Parking, Perimeter Fence And Roadway For Its Site Development. Approved Budget For The Contract : ₱198,000,000.00 Source Of Funds : Fy 2024 Gaa For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium B License Category : A Cost Of Bidding Documents : ₱50,000.00 2. Name Of Contract : Fy 2024 Dpwh Infrastructure Program Convergence And Special Support Program Basic Infrastructure Program (bip) Access Roads And/or Bridges From The National Road/s Leading To Major/ Strategic Public Buildings/ Facilities Construction Of Bridge, Brgy Calubcob, Naic, Cavite Contract Id No. : 24d00226 Contract Location : Cavite Province Scope Of Works : Constrution Of Single Span Flat Slab With A Total Length Of 12.00m (5.60m Wide) As Superstructure And Supported By 4 - 0.80m Dia. Concrete Drilled Piles As Substructure For Both Abutments With Sidewalk, Approach Slab, And Road Concreting. Approved Budget For The Contract : ₱9,900,000.00 Source Of Funds : Fy 2024 Gaa For Dpwh Infra Program Contract Duration : 165 C.d. Size Range : Small B License Category : C & D Cost Of Bidding Documents : ₱10,000.00 3. Name Of Contract : Fy 2024 Dpwh Infrastructure Program Convergence And Special Support Program Basic Infrastructure Program (bip) Coastal Roads/causeway For Environmental Protection/conservation Construction Of Causeway, Barangay Lapu-lapu, Unisan, Quezon Contract Id No. : 24d00231 Contract Location : Quezon Province Scope Of Works : Construction Of Causeway Made Of Class Ii (armor Rocks) And Class Iii (core Rocks) Materials. Approved Budget For The Contract : ₱168,300,000.00 Source Of Funds : Fy 2024 Gaa For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium B License Category : A Cost Of Bidding Documents : ₱50,000.00 4. Name Of Contract : Fy 2024 Dpwh Infrastructure Program Convergence And Special Support Program Basic Infrastructure Program (bip) Multi-purpose Buildings/ Facilities To Support Social Services Construction Of Multi Purpose Building (sports Complex) In Molino 4, Bacoor City, Cavite Contract Id No. : 24d00258 Contract Location : Cavite Province Scope Of Works : The Scope Of Works For The Construction Of Multi-purpose Building (sports Complex) In Molino 4, Bacoor City, Cavite Are All Structural Works, Plumbing Works, Electrical Works, Mechanical Works And Finishing Works For Generator Room, Pump Room And Cafeteria. Approved Budget For The Contract : ₱49,500,000.00 Source Of Funds : Fy 2024 Gaa For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱25,000.00 5. Name Of Contract : Doh Health Facilities Enhancement Program (hfep) Construction Of New Super Health Centers / Rhu General Nakar Super Health Center, Quezon Contract Id No. : 24d00262 Contract Location : Quezon Province Scope Of Works Structural - All Concrete Foundation Works - All Concrete Beams At All Levels - All Concrete Columns At All Levels - All Slab – On – Grade - All Roof Works (trusses, Purlins, Sagrods) Architectural - Finishing Hardware For Exterior Doors - Exterior Doors - Windows (sliding, Awning, And Fixed) - Roofing Sheet And Accessories - Floor Finish (cement Plain) - Plaster (all Walls B/s) - Roofing Insulation - All Chb Walls Plumbing - All Waterline Works - Cistern Works (excluding Tank And Pump) - All Sewer Line Works - Septic Tank - Catch Basin Electrical - Rough-ins For Switch Boards, Panel Boxes, And Conduits Approved Budget For The Contract : ₱11,940,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 180 C.d. Size Range : Small B License Category : C & D Cost Of Bidding Documents : ₱25,000.00 6. Name Of Contract : Doh Health Facilities Enhancement Program (hfep) Construction Of New Super Health Centers / Rhu Amadeo, Super Health Center, Cavite Contract Id No. : 24d00263 Contract Location : Cavite Province Scope Of Works Structural - All Concrete Foundation Works - All Concrete Beams At All Levels - All Concrete Columns At All Levels - All Slab – On – Grade - All Roof Works (trusses, Purlins, Sagrods) Architectural - 30% Of Ceiling Works - Finishing Hardware For Exterior Doors And Interior Flush Doors - Exterior Doors And Interior Flush Doors - Windows (sliding, Awning, And Fixed) - Roofing Sheet And Accessories - Floor Finish (cement) - Plaster On Both Sides (all Walls) - Roofing Insulation - All Chb Walls Plumbing - All Waterline Works - Cistern Works (excluding Tank And Pump) - All Sewer Line Works - Septic Tank - Catch Basin Electrical - Fittings And Accessories - Rough-ins For Switch Boards, Panel Boxes, And Conduits Approved Budget For The Contract : ₱11,940,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 180 C.d. Size Range : Small B License Category : C & D Cost Of Bidding Documents : ₱25,000.00 7. Name Of Contract : Doh Health Facilities Enhancement Program (hfep) Construction Of New Super Health Centers / Rhu Cuenca, Super Health Center, Batangas Contract Id No. : 24d00264 Contract Location : Batangas Province Scope Of Works Structural - All Concrete Foundation Works - All Concrete Beams At All Levels - All Concrete Columns At All Levels - All Slab – On – Grade - All Roof Works (trusses, Purlins, Sagrods) Architectural - Finishing Hardware For Exterior Doors - Exterior Doors - Windows (awning And Fixed Only) - Roofing Sheet And Accessories - Cement Floor Finish (plain) - Plaster (all Walls) - Roofing Insulation - All Chb Walls Plumbing - All Waterline Works - Cistern Works (excluding Tank And Pump) - All Sewer Line Works - Septic Tank - Catch Basin Electrical - Fittings And Accessory - Rough-ins For Switch Boards, Panel Boxes, And Conduits Approved Budget For The Contract : ₱11,940,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 180 C.d. Size Range : Small B License Category : C & D Cost Of Bidding Documents : ₱25,000.00 8. Name Of Contract : Doh Health Facilities Enhancement Program (hfep) Construction Of New Super Health Centers / Rhu Naic, Super Health Center, Cavite Contract Id No. : 24d00265 Contract Location : Cavite Province Scope Of Works Structural - All Concrete Foundation Works - All Concrete Beams At All Levels - All Concrete Columns At All Levels - All Slab – On – Grade - All Roof Works (trusses, Purlins, Sagrods) Architectural - Finishing Hardware For Exterior Doors - Exterior Doors - Windows (awning And Fixed) - Roofing Sheet And Accessories - Floor Finish (cement) - Plaster (all Walls B/s) - Roofing Insulation - All Chb Walls Plumbing - All Waterline Works - Cistern Works (excluding Tank And Pump) - All Sewer Line Works - Septic Tank - Catch Basin Electrical - Fittings And Accessories - Rough-ins For Switch Boards, Panel Boxes, And Conduits Approved Budget For The Contract : ₱11,940,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 180 C.d. Size Range : Small B License Category : C & D Cost Of Bidding Documents : ₱25,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category And Classification As Indicated On The Above Table. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, And Inspect The Bidding Documents At The Address Given Below During Weekdays From 8am – 2pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders Starting On August 17, 2024 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents (amount Indicated On The Above Table). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, Will Hold A Pre-bid Conference On August 24, 2024 @ 10:00 A.m. At Bidding Room, Dpwh Regional Office No. Iv-a, Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna And Through Video Conferencing Via Zoom And Live – Streamed On Youtube Https://www.youtube.com/channel/ucbiu3eadzp_ckg02rjmipfg Which Shall Be Open To Prospective Bidders. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_r4a@dpwh.gov.ph For Electronic Submission On Or Before September 05, 2024 @ 10:00 A.m. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On September 05, 2024 @ 10:00 A.m. At Bidding Room, Dpwh Regional Office No. Iv-a, Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above Or Through Video Conferencing Via Zoom Which Shall Also Be Live – Streamed On Youtube Https://www.youtube.com/channel/ucbiu3eadzp_ckg02rjmipfg. Late Bids Shall Not Be Accepted. 10. If At The Time Of The Post – Qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b) (ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject To Be Bid. 11. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Joel F. Limpengco Bac, Chairperson Director Iii Assistant Regional Director Telephone No. (02) (049) 34810204 Email Address: R4a.procurement@gmail.com Alex B. Virtudazo Bac Secretariat Head Telephone No. (02) (049) 34810215 / 34810225 Email Address: R4a.procurement@gmail.com Department Of Public Works And Highways Regional Office No. Iv-a Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna 13. You May Visit The Following Websites: For Downloading Of Bidding Documents At Www.dpwh.gov.ph. For Online Bid Submission At Electronicbids_r4a@dpwh.gov.ph. August 14, 2024 Approved By: Sgd Joel F. Limpengco Director Iii Assistant Regional Director Bac Chairperson

Details: U.s. Department Of Commercenational Oceanic And Atmospheric Administration (noaa)fisheries Service Northeast Fisheries Science Center (nefsc)request For Information For Atlantic Surf Clam And Ocean Quahog Survey Vessel Charterthis Is A Request For Information (rfi) Only And Does Not Constitute A Commitment, Implied Or Otherwise, That A Procurement Action Will Be Issued Or Awarded. This Rfi Requests Industry Input For Market Research Purposes In Accordance With Federal Acquisition Regulations (far) Part 10 Procedures. This Is Not A Solicitation, Nor Does It Guarantee A Solicitation Will Be Issued. Requests For A Solicitation Will Not Receive A Response. This Is Not A Request For Proposals And It Does Not Obligate The Government In Any Manner.no Entitlement To Payment Of Direct Or Indirect Costs Or Charges By The Government Will Arise As A Result Of The Submission Of Information. All Information Considered Proprietary Shall Be Marked Accordingly, And Properly Identified Proprietary Information Will Be Safeguarded In Accordance With Federal Regulations. The Government Shall Not Be Liable For Or Suffer Any Consequential Damages For Improperly Identified Proprietary Information. The Purpose Of This Announcement Is Solely To Gather Information From The Marketplace, And Any Responses Received Will Neither Be Considered An Offer By The Responding Party Nor Returned To The Responding Party. No Telephone Inquiries Will Be Accepted, And Requests For Solicitation Packages Will Not Be Honored At This Time Since No Solicitation Has Been Prepared.synopsis: Rfi To Purchase A Vesselthe Department Of Commerce (doc), National Oceanic Atmospheric Administration (noaa), National Marine Fisheries Service, Northeast Fisheries Science Center (nefsc), Ecosystem Surveys Branch Is Seeking A Research Vessel To Participate In A Priority Resource Survey Of The Surf Clam And Ocean Quahog Resources Along The Continental Shelf From Virginia Through Massachusetts Including The U.s Waters Of Georges Bank. The Survey Will Be Conducted During Summer (august) Of 2025 With Option Years Through 2029 Survey Season. The Awarded Contract Will Have A One-year Base Period With Four One-year Option Periods (5 Years Total).the Survey Will Be Conducted During Summer (august) Of 2025 With Option Years Through 2029 Survey Season. The Awarded Contract Will Have A One-year Base Period With Four One-year Option Periods (5 Years Total).the Nefsc Is Seeking Information On Survey Vessel Charter That Meet The Requirements Outlined Below. I. technical Specificationsthe Monohull Design Should Maximize Interior Deck Space And Have A General Configuration Allowing For Various Modifications Including Wet Lab, Dry Lab, Gear Storage, Hazmat Storage, Freezer, And Berthing Spaces. In Addition, Allow For Adding Or Currently Having The Following Equipment: Dynamic A-frame, J-frame, Support Winches, And/or Knuckle Boom(s). Also, The Vessel Should Be Able To Accommodate Various Electronic Equipment Upgrades Such As Dynamic Positioning, Multibeam Sonar, And/or Live-feed Camera Systems.a. vessel And Gear Requirementsthe Vessel And Gear Must Be Capable Of Safely Conducting Clam Dredge Tows Along The Continental Shelf In Waters Ranging From 5 To 77 Fathoms. In Other Words, The Vessel Is Required To Be Able To Deploy 155 Fathoms Of Hose, Hauser, And Deployment Cable To Attain Maximum Depths Of 77 Fathoms On A Subset Of Stations In The Deepest Strata Set. The Vessel Crew Must Be Knowledgeable And Experienced With Fishing For Surf Clams And Ocean Quahogs In The Region Described And With Conditions In The Target Sampling Area. The Vessel Must Be Capable Of Carrying And Towing Two Commercial Sized Clam Dredges.the Vessel Must Have:1. sufficient Berth Space And Lavatory Facilities (hot Water Shower, Sink And Toilet) For Crew Members And Seven (7) To Nine (9) Scientific Personnel2. mess Facilities For Concurrent Seating Of Five (5) Scientists3. fuel And Potable Water Capacity To Operate Continuously For Six (6) Sea Days;4. adequate Deck Space To Accommodate A Scientific Van (analogous In Size To An 8’ X 20’ Iso Container) Containing Scientific Equipment Or A Comparable Enclosed Space Suitable For Processing Catch. 5. equipment To Monitor Vessel Speed, Direction, Bearing And Water Depth Includinga. two (2) Operational Conventional And/or Electronic Compassesb. an Echo-sounder Capable Of Accurately Determining The Water Depth Throughout The Survey Area (each Sounder Must Have A Data Output Cable Available For Noaa –fisheries Data Collection)c. sensors Should Be Serviced And Calibrated Prior To The Survey6. navigation Equipment To Include:a. two (2) Satellite Navigation Systems (dgps) (each Gps Must Have A Data Output Cable From The Sensor For Noaa Fisheries Data Collection)b. at Least Two Radar Units7. communications Equipment To Include:a. a Vhf Radiob. a Uhf Radioc. cellular Phoned. email Capability To A Distance Of 100 Nm Offshore.8. freezer Storage For The Exclusive Use For Storage Of Scientific Samples (minimum 20 Cubic Feet; Not Collocated With Frozen Food Stores)9. safety Equipment To Include:a. a Minimum Of Two Epirbsb. survival Suits For Each Of The Vessel’s Crew And Masterc. life Rafts Sufficient To Accommodate Both The Vessel’s Crew And Nine (9) Embarked Scientists10. fishing Equipment Maintained To Standardized Survey Specifications: 1. commercial Sized Survey Dredge(s) Fitting Either Of The Two Options Below, Option A Is Preferred, Option B Is Acceptable:a. option A: 1. Official Commercial Sized Survey Dredge (1 And ⅜” Bar Spacing) With A 150-inch Total Width, And 2. Commercial Sized Selectivity Dredge With 21 Mm Bar Spacing B. option B: A Single Commercial Sized Survey Dredge With Adjustable Bar Spacing (150-inch Width Preferred)2. equipment To Safely Deploy Clam Dredges Up To 150 Inches Wide To Depths Of Up To 77 Fathoms3. free Spooling Winches For Deployment Of Gear4. a Conveyor Belt System For Moving The Catch From Port To Starboard Hoppers Across A Shaker Table And Onto A Sorting Belt ● desirable Equipment Includes:a. printerb. fax Machine***draft Statement Of Work Attached***information Requested:the Government Requests That All Interested Vendors Provide Information Regarding Their Experience And Capability To Provide An Eligible Vessel. Noaa May Use The Responses To This Sources Sought To Conduct Additional Market Research. Information Obtained From This Sources Sought And The Subsequent Communication With The Vendors, If Any, May Assist Noaa In Developing A Formal Request For Proposal (rfp) Or Request For Quote (rfq).in Addition To Addressing Technical Capabilities, Responses Must Include The Following: 1. name And Address Of Firm2. size Of Business (e.g. Small, Small Disadvantaged Business, Woman Owned, Etc.)3. average Annual Revenue For The Past 3 Years And Number Of Employees4. ownership5. number Of Years In Business6. affiliate Information7. parent Company, Joint Venture Partners, Potential Teaming Partners, Prime Contractor (if Potential Subcontractor) Or Subcontractors (if Potential Prime Contractor)8. point Of Contact - Address And Phone Numbersubmittal Requirements: Telephone Responses Are Not Solicited And Will Not Be Accepted. No Solicitation Exists At This Time. This Synopsis Is Not To Be Construed As A Commitment By The Government To Award A Contract, Nor Will The Government Pay For The Solicited Information.please Submit Your Response To The Attention Of The Contracting Specialist/ Contracting Officer, Amanda Rossiter (amanda.rossiter@noaa.gov) No Later Than February 6, 2025 At 2:00 P.m., Eastern Time. Each Response Shall Be No More Than 15 Single-sided, Single-spaced Pages (excluding The Cover Page), And Each Page Shall Be Separately Numbered, And Shall Be In .pdf Format.

Details: Rlp Procurement Summary/solicitation – United States Army Corps Of Engineers the U.s. Government, By And Through United States Army Corps Of Engineers (usace), Seeks To Lease The Following Space: state: Washington city: Crawford Mountain, Near The City Of Tenino delineated Area: north: Crawford Mountain south: Crawford Mountain east: Crawford Mountain west: Crawford Mountain gross Square Feet: 26 space Type: Communication Site initial Term:12 Months option Term:four Annual 12-month Options To Renew full Term: 60 Months (including The Initial Term And Option Terms) address: U.s. Army Corps Of Engineers, Seattle District, Attn: Cenws-res, 4735 East Marginal Way South, Building 1202, Seattle, Washington 98134-2388 email Address: Cenwsre-rfp@usace.army.mil real Estate Contracting Officer Thomas J. Seymour Will Be Signing The Lease For The Government. electronic Offer Submission: offers Must Be Submitted Electronically Via Email Listed Above. Offers Are Due On Or Before: February 28, 2025. any Questions Regarding This Solicitation May Be Directed To Primary Or Secondary Points Of Contact Listed In The “contact Information” Section Of This Notice. the U.s. Government, By And Through Usace, Currently Occupies A Communication Tower Space And Related Space In A Building Under A Lease In The City And State Specified Above, That Will Be Expiring. The Government Is Considering Alternative Space If Economically Advantageous. In Making This Determination, The Government Will Consider, Among Other Things, The Availability Of Alternative Space That Potentially Can Satisfy The Government’s Requirements, As Well As Costs Likely To Be Incurred Through Relocating, Such As Physical Move Costs, Replication Of Tenant Improvements And Telecommunication Infrastructure, Non-productive Agency Downtime, And Costs, Including Rent, Related To Vacating The Current Location Prior To Lease Termination. the Government’s Desire Is For A Lease To Include Base Rent, Cam, And Electricity For A Communication Tower Space For An Initial Lease Term Of One (1) Year With Four (4) Annual Renewal Rights, For A Total Term Of Five (5) Years, And Termination Rights For The Government And Location Within The Delineated Area Specified Above. Non-exclusive Parking For Government Vehicles Must Be Provided 24 Hours 7 Days. Offered Space Must Meet Government Requirements Per The Terms Of The Government Lease. Interested Respondents May Include Property Owners And Representatives With The Exclusive Right To Represent Property Owners. Representatives Of Property Owners Must Include The Exclusivity Granting The Exclusive Right To Represent The Building Owner With Their Response To This Advertisement. additional Requirements: 24-hour Unrestricted Access To Leased Space. the Communication Tower Site Should Have A Secure Building Where Communication Equipment May Be Stored, Operated, And Maintained. rights To Use An Access Road To Access The Leased Space. electricity Must Be Provided. space Should Not Be Located Within The 100-year Flood Plain Or Wetland Unless The Government Has Determined It To Be The Only Practicable Alternative. space Should Not Located Near Establishments Whose Primary Operation Is The Sale Of Alcoholic Beverages, Firearms Sold/discharged, Marijuana Dispensaries, Or Where There Are Tenants Or Invitees Related To Drug Treatment Or Detention Facilities. subleases Are Not Acceptable. space Configuration Shall Be Conducive To An Efficient Layout. Considerations For An Efficient Layout Include, But Are Not Limited To, The Following: Size And Location Of Interior Fire (support) Walls, Size And Number Of Columns, Column Placement, Bay Depts, Window Size And Placement, Convector Size And Placement, Electrical And Telephone Accessibility, And Angles, Curves, Or Offsets That Will Result In An Inefficient Use Of Space. the Offered Space Must Meet Or Be Capable Of Meeting Government Requirements For Security, Fire Life Safety And Handicapped Accessibility. if Space Offered Is Above Ground Level, There Must Be Elevator Access. the Government Will Have Access To The Space 24 Hours A Day, 7 Days A Week. Normal Hours Of Operation Are Monday Through Friday 0800 To 1700 (excluding Weekends And Federal Holidays). additionally, Offerors Must Review The Attached Documents Which Contain Other Government Leasing Requirements: request For Lease Proposals exhibit A – Rental Proposal Worksheet, Usace Form 2020 exhibit B – U. S. Government Lease For Real Property, Usace Form 2030 exhibit C – General Clauses, Usace Form 2040 (gsa Template 3517) exhibit D – Sam Representations And Certifications, Usace Form 2050 exhibit E – Agency Agreement, Authorization For Property Manager To Act On Behalf Of Owner, Usace Form 2070 (where Applicable) to Be Responsive, Your Offer Should Be Based On All The Terms, Conditions, And Responsibilities Expressed Throughout The Rlp And Lease And Be Submitted Electronically. Please Review The Rlp And All Attachments Carefully Paying Particular Attention To The Solicitation Requirements. the Following Forms Must Be Completed, Initialed, And/or Signed And Returned Electronically With Your Initial Offer. (note: There May Be Other Required Forms. Refer To The Enclosed Rlp For Details.) exhibit A – Rental Proposal Worksheet, Usace Form 1364 exhibit D – Sam Representations And Certifications, Gsa Form 3518 (if Offeror Is Not Registered In Sam At The Time Of The Offer Submission) exhibit E – Agency Agreement, Authorization For Property Manager To Act On Behalf Of Owner, Usace Form 2070 (where Applicable) evidence Of Ownership (warranty Deed) Or Control Of Building Or Site. please Note That You Are Not Required To Initial And Return The Following Documents At This Time: request For Lease Proposal (rlp) exhibit B – U. S. Government Lease For Real Property, Usace Form 2030 exhibit C – General Clauses, Usace Form 2040 (gsa Template 3517) please Review All The Attached Documents Thoroughly To Obtain A Complete Understanding Of The Government’s Requirements. One Item Of Note In The General Clauses, Gsa Template 3517, Is The Requirement To Register In The System For Award Management (sam) At Www.sam.gov (general Clause 17, Cfr 52.204-7). This Registration Is Mandatory For Any Entity Wishing To Do Business With The Government And Must Be Completed At The Time Of Lease Award. Entities Not Currently Registered In Sam Are Advised To Start The Registration Process As Soon As Possible. after Receipt Of All Proposals, Conclusions Of Any Discussions, And Receipt Of Best And Final Offers, The Government Will Select A Location Based On The Best Value Specified In The Enclosed Rlp. Past Performance, If Applicable, Will Also Be Taken Into Consideration. The Selection Is Expected To Occur Approximately Thirty (30) Days Following The Initial Proposal Response Date Stated Above. A Government Market Survey, Appraisal, Or Value Estimate Will Be Conducted To Determine Fair Market Rental Value. offered Space Must Meet Government Requirements For Fire Safety, Accessibility, Seismic, And Sustainability Standards Per The Terms Of The Lease. Offered Space Shall Not Be In The 1-percent-annual Chance Floodplain (formerly Referred To As “100-year” Floodplain). entities Are Advised To Familiarize Themselves With The Telecommunications Prohibitions Outlined Under Section 889 Of The Fy19 National Defense Authorization Act (ndaa), As Implemented By The Federal Acquisition Regulation (far).). For More Information, Visit: Https://acquisition.gov/far-case-2019-009/889_part_b. funds May Or May Not Be Presently Available For This Effort. No Award Will Be Made Under This Solicitation Until Funds Are Available. The Government Reserves The Right To Cancel This Solicitation, Either Before Or After The Closing Date For Receipt Of Proposals. In The Event The Government Cancels This Solicitation, The Government Has No Obligation To Reimburse Offeror(s) For Any Cost.

Details: Description Republic Of The Philippines Batangas State University Batangas City Request For Quotation "improvement Of Red Spartan Digital Printing Hub Location" 1. The Batangas State University (batstate U) Through The Bids And Awards Committee Invites Interested Firms/supplier To Submit Quotation For The Project "improvement Of Red Spartan Digital Printing Hub Location" With An Approved Budget For The Contract (abc) Two Hundred Thirty-three Thousand Two Hundred Seventy Pesos And Fifty-nine Centavos Only (php 233,270.59). Quotation Received In Excess Of The Abc Shall Be Automatically Rejected At The Opening. Item No. Qty Description Total 1 711 Piece 1" Fiber Cement Board Screw 497.70 2 250 Piece 1" Gypsum Screw 157.50 3 2 Piece 1-gang Switch, 10a, 240v W/ Plate & Cover 308.00 4 7 Piece 12mm Thk. X 4' X 8' Gypsum Board 5,731.25 5 10 Piece 2" Paint Brush 826.00 6 2 Piece 2" X 250' Mesh Tape 375.00 7 6 Piece 2" X 250' Mesh Tape 750.00 8 1 Piece 2-gang Switch, 10a, 240v W/ Plate & Cover 266.00 9 7 Set 2x20w, 2000 Lumens, Led Batten Light, Surface Mounted 18,326.00 10 9 Piece 3/4" Thick X 4'x8'x (24kg) Marine Type Plywood 20,790.00 11 30 Piece 35mm X 76mm X 0.50mm X 3m Metal Studs 5,625.00 12 20 Piece 35mm X 76mm X 0.50mm X 3m Metal Track 3,750.00 13 2 Piece 4 Pin Industrial Socket 3p 2,520.00 14 10 Piece 4" Roller Brush With Handle 630.00 15 20 Piece 4.5mm Thk. X 4' X 8' Fiber Cement Board 15,850.00 16 4 Piece 4in X 4in X 3mm Ball Bearing Hinges 1,750.00 17 1 Piece 60at 3p Cb (tapping Point) 7,140.00 18 1 Lot Assorted Fittings For Mdp Assembly 2,800.00 19 4 Piece C-channel 1mm X 12mm X 38mm X 5m 1,042.96 20 1 Bag Cement 295.00 21 3 Kilogram Common Wire Nail Asstd 378.00 22 45 Meter Copper Wire 14.0mm² Thhn/thwn 6,306.30 23 195 Meter Copper Wire 3.5mm² Thhn/thwn 7,495.80 24 29 Meter Copper Wire 5.5mm² Thhn/thwn 1,705.78 25 29 Meter Copper Wire 8.0mm² Thwn/thhn 2,668.58 26 8 Piece Duplex Receptacle, Universal Type With Grounding Slot, 16a, 240v, (wall-mounted, Ceiling Mounted) 1,456.00 27 1 Piece Door 0.80m X 2.10m Mdf Interior Door With Jamb 4,584.75 28 1 Piece Door 0.80m X 2.10m X 1/2" Thk. Clear Tempered Glass In Top And Bottom Frame With Stainless Door Handle And Complete Accessories And Frosted Sticker 13,557.60 29 1 Piece Door Lock Set Door Lock Set - Cylindrical 475.00 30 10 Piece Double Furring 0.50mm X 19mm X 5m 2,187.50 31 15 Piece Emt Pipe, 32mmø (1"ø), Thick Wall 17,715.60 32 5 Roll Electrical Plastic Tape, Big (flame Retardant) 350.00 33 65 Piece Emt Pipe, 15mmø (½"ø), Thick Wall 22,759.10 34 11 Piece Emt Pipe, 25mmø (½"ø), Thick Wall 8,105.57 35 3 Liter Flat Enamel 918.75 36 4 Liter Flat Latex 1,035.00 37 1 Gallon Glazing Putty 923.75 38 2 Gallon Gypsum Putty (4 Ltrs.) 850.00 39 4 Gallon Latex Top Coat 3,150.00 40 5 Liter Latex Top Coat 1,375.00 41 1 Assembly Mdp Panelboard: (mdp) 230v, Main: 1-60at/100af 3p, Branches; 1-40at/100af 2p, 6-20at/100af 2p, 2-20at/100af 3p, 2-spare 20at/100af 2p Cb 28,583.10 42 1 Lot Other Supports & Fittings/hardware Needed Not Mentioned Above 1,400.00 43 3 Gallon Primer For Concrete 2,512.50 44 3 Liter Primer For Wood 817.50 45 6 Liter Putty 1,387.50 46 4 Liter Quick Drying Enamel 1,035.00 47 5 Kilogram Rags/newspaper 218.75 48 1 Cubic Meter Sand S1 1,700.00 49 60 Piece Sand Paper For Wood And Drywalls 1,125.00 50 11 Piece Suspension Clip With Rod Joiner 1,691.25 51 3 Liter Thinner 600.00 52 22 Piece W-clip (double) 137.50 53 10 Piece Wall Angle 50mm X 25mm X 3m 625.00 54 4 Gallon Wood Glue 2,400.00 55 3 Liter Wood Prime 825.00 56 7 Set Μpvc Junction Box With Cover, 4" Orange Octagonal 274.40 57 13 Set Μpvc Utility Box, 2"x4" Orange 509.60 Note: Kindly Indicate The Brand On Your Quotation. 2. Philgeps Registration Certificate And Other Business Permits Shall Be Attached Upon Submission Of The Quotation. 3. The Quotation Must Be Submitted (can Also Be Send Thru Fax And Email At The Contact Details Listed Below) Or To The Rizal Avenue Extension, Batangas City And Shall Be Received By The Committee On Or Before 5:00 Pm Of January 22, 2025. E-mail : Procurement.central.external@g.batstate-u.edu.ph 4. The Bsu Reserves The Right To Reject Any Or All Quotations And/or Proposals And Waive Any Formalities/informalities Therein And To Accept Such Bids It May Consider As Most Advantageous To The Agency And To The Government. Batstate U Neither Assumes Any Obligation For Whatsoever Losses That May Be Incurred In The Preparation Of Bids, Nor Does It Guarantee That An Award Will Be Made. Mr. Jonas Erik L Ebora Assistant Director, Procurement Rizal Avenue Extension, Batangas City 980-0385 Loc. 1230

Details: Description Republic Of The Philippines Department Of Public Works And Highways Zamboanga Del Norte 2nd District Engineering Office Regional Office Ix Sta. Isabel, Dipolog City Invitation To Bid For Construction (completion) Of Multi-purpose Building And Its Facilities (sindangan Cultural And Sports Center), Sindangan, Zamboanga Del Norte (phase Ii) The Department Of Public Works And Highways, Zamboanga Del Norte 2nd District Engineering Office, Through The Fy 2025 General Appropriations Act (ra 12116) Intends To Apply The Sum Of Nineteen Million Eight Hundred Thousand Pesos (php 19,800,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 24jc0070: Construction (completion) Of Multi-purpose Building And Its Facilities (sindangan Cultural And Sports Center), Sindangan, Zamboanga Del Norte (phase Ii). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Department Of Public Works And Highways, Zamboanga Del Norte 2nd District Engineering Office Now Invites Bids For The Hereunder Procurement Project. Project Name : Construction (completion) Of Multi-purpose Building And Its Facilities (sindangan Cultural And Sports Center), Sindangan, Zamboanga Del Norte (phase Ii) Contract Id : 25jc0105 Location : Disud, Sindangan, Zamboanga Del Norte Scope Of Work : Spandrel Ceiling (cultural Center, Interior), Reflective Insulation (main Roofing @ Ceiling), Glass Railing, Rear View Deck Wall Partition, Installation Of Airconditioning Units At Front And Rear View Decks, Sewer Line And Cold Water Line Works, Electrical Works. Abc : Nineteen Million Eight Hundred Thousand Pesos (php 19,800,000.00) Total Contract Duration : 160 Calendar Days No. Of Pre-determined Unworkable Days : 31 Calendar Days Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Small B For General Building (gb-1), Building. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post Qualification. Information On Registration Can Be Obtained From The Procurement Service During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr), Updated As Of 19th Of July 2024, Of Republic Act (ra) No. 9184. Interested Bidders May Obtain Further Information From Department Of Public Works And Highways, Zamboanga Del Norte 2nd District Engineering Office And Inspect The Bidding Documents At The Procurement Unit Office, Dpwh - Zdn 2nd Deo, Sta. Isabel, Dipolog City, Zamboanga Del Norte During Weekdays From 8:00 A.m. To 5:00 P.m. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 25, 2025 From Given Address And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty-five Thousand Pesos (php. 25,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person For Bids Submitted Manually Or Through Email Specified Below For Bids Submitted Electronically. The Department Of Public Works And Highways, Zamboanga Del Norte 2nd District Engineering Office Will Hold A Pre-bid Conference On March 05, 2025, 9:00 A.m. At Procurement Unit Office, Dpwh - Zdn 2nd Deo, Sta. Isabel, Dipolog City, Zamboanga Del Norte And Live-streamed Via Youtube: Https://www.youtube.com/@dpwh.zdn2deo, Which Shall Be Open To Prospective Bidders. Bid Submission Maybe Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In Bds Clause 17. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Procurement Unit Office, Dpwh - Zdn 2nd Deo, Sta. Isabel, Dipolog City, Zamboanga Del Norte, Or (ii) Online/electronic Submission As Indicated Below On Or Before March 17, 2025, 10:00 A.m. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. Bid Opening Shall Be On March 17, 2025, 10:00 A.m. At The Procurement Unit Office, Dpwh - Zdn 2nd Deo, Sta. Isabel, Dipolog City, Zamboanga Del Norte And Live-streamed Via Youtube: Https://www.youtube.com/@dpwh.zdn2deo. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. If At The Time Of The Post-qualification Procedure, The Bac Verifies That The Bidder Has Any Of The Deficiencies, Enumerated In Section 34.3(b)(ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 Due To The Contractor's Fault Or Negligence, The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject Of The Bid. The Department Of Public Works And Highways, Zamboanga Del Norte 2nd District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Ma. Erma F. Otic Head, Procurement Unit Dpwh Zdn 2nd Deo Brgy. Sta. Isabel, Dipolog City Otic.ma_erma@dpwh.gov.ph Tel. No. 065-908-288 Jose Teovy S. Ochotorena Bac, Chairperson Chief, Construction Section Dpwh Zdn 2nd Deo Brgy. Sta. Isabel, Dipolog City Ochotorena.jose_teovy@dpwh.gov.ph Tel. No. 065-908-28 You May Visit The Following Websites/links Or Scan The Qr Code Below: Https://www.dpwh.gov.ph/dpwh/business/procurement/cw/advertisement Https://notices.philgeps.gov.ph For Online Bid Submission: Electronicbids_zamboangadelnorte2@dpwh.gov.ph For Downloading Ded Plans, Abc And Boq: Https://tinyurl.com/25jc0105 For Downloading Editable Copies Of Prescribed Bidding Forms: Https://tinyurl.com/civilworksforms Date Of Issue: February 25, 2025 (jose Teovy S.ochotorena ) ̅ Bac Chairperson

Details: The property is a 3-storey multi-unit residential building with no basement for senior living. All floors can be reached via the internal staircase. The house has a thermal insulation facade. The roof is a gable roof with a tile covering. Due to serious moisture damage to the house and the apartments, both the thermal insulation facade must be demolished and the apartments partially gutted. After the drying phase, the roof structure will be changed, the facade will be restored and the apartments renovated. Carpentry work: - 42 plastic windows refurbished and made usable - 15 roller shutter boxes refurbished and made usable - 32 interior door panels shortened - 20 new interior window sills Sun protection work: - 18 manually operated roller shutter boxes retrofitted in a wide range of dimensions

Details: Award no.: 67/24 Vg-l-bö Lot 2 Implementation of fire protection concept Gs Wahrenbrück - 2nd building + completion of 2nd escape route on the ground floor - Lot 2: Carpentry work - 9 interior doors with surrounding frame Cpl/hpl - 1 smoke-tight door element made of aluminum profiles - 17 pieces of plastic windows with two leaves - 1 piece of plastic windows with three leaves - 3 pieces of electric opening and unlocking system / smoke extraction drive - 35 Ldm interior window sills made of Werzalit - 30 Ldm exterior window sill covers made of titanium zinc sheet - 3 Ldm exterior window sills made of aluminum profiles

Details: Description Item Number | Description | Qty | Total Cost Lot 1 | Total Cost: Php ₱4,429,000.00 Molecular Biology Laboratory 1. Thermocycler/ Pcr "block Format: 96-well 0.2 Ml Temperature Optimization: 6-zone Veriflex Block On 96-well Systems User Interface: 8.0-inch Touch Screen Maximum Sample Throughput: 384 Reactions Max Block Ramp Rate: 6.0°c/sec With Training, Warranty, And Calibration" Qty: 1 Unit: Unit 2. Refrigerated Microcentrifuge "capacity: 24 X 1.5/2 Ml Max. Speed: 13,300 Rpm Max. Rcf: 17,000 X G Noise Level: 50 Db(a) Temperature Range: -9°c To +40°c Certifications/compliance: Csa, Ce, Ivd Type: Benchtop Centrifuge Includes: 24 X 1.5/2.0ml Rotor With Clickseal Biocontainment Lid Description: Microcentrifuge, Refrigerated Electrical Requirements: 120 V 60 Hz Refrigerated: Yes Run Time: 1 To 99 Min. (1 Min. Increments); Hold Standards: Iec 61010-1, Iec 61010-2-020 Dimensions (hwd): 12.9 X 11.6 X 17.5 In. (33.0 X 29.5 X 44.5 Cm) Net Weight: 62.0lb. (28.0 Kg) Frequency: 60 Hz Voltage: 120 V Rotor: 24 X 1.5/2 Ml Rotor With Clickseal Biocontainment Lid With Training, Warranty, And Calibration" Capacity (english): 23 Cu. Ft. Capacity (metric): 650 L Door Style: Solid No. Of Doors: 1 Shelves: 4 Certifications/compliance: Ul, Cul, Ce Display: Microprocessor Defrost: Manual Interior Dimensions: 28.5 X 24 X 58 In. (72.3 X 61 X 147.3 Cm) With Training, Warranty, And Calibration" Qty: 1 Unit: Unit 3. Gel Documenter System "camera & Optics Cx4 Camera: Scientific Grade Camera - Made In Germany 2 Megapixels Resolution Extendable To 7,6 Megapixels Passive Cooling • 16-bit – 65 536 Grey Levels •usb-3 Connection • Motorized Zoom Lens With Feedback • Field Of View: 20x20cm Hardware Smart Darkroom Technology: • Software Control Of The Lighting • White Light Led Panels With Automatic Intensity Adjustment • Uv Cut-off Filter • Fix Position Transilluminator With Optional Protection Screen Steel And Stainless-steel Darkroom For Long Lasting Robustness. Wide Access Door With Uv Safety Shut-off Software Free Bio-vision Software For Image Acquisition With Full Glp Compliance. Molecular Weight Calculation, Band Quantification, Colony Counting, Distance Calculation, Text Annotation And Image Enhancement Included. Cfr21 Part 11 Ready Applications Dna And Rna Gels And Fluorescence Stain Imaging: • Ethidium Bromide, Sybr-safe, Sybr-green, Gel-red, Gel-green, Sybr-gold, Gfp, Pro-q Emerald, Sypro Ruby, Fitc, Dapi • Colorimetric Stained Protein Gels, X-ray Film, Autorads, Sscp Gels, Colony Dish And Flask Imaging And Other Epi White Light Applications • Coomassie Blue, Silver Stain, Ponceau S Red, Copper Stain. Qty: 1 Unit: Unit 4. -20°c Freezer "temperature (setpoint): -25°c To -15°c (-20°c) Type: High-performance Freezer, Capacity (english): 23 Cu. Ft. Capacity (metric): 650 L Door Style: Solid No. Of Doors: 1 Shelves: 4 Certifications/compliance: Ul, Cul, Ce Display: Microprocessor Defrost: Manual Interior Dimensions: 28.5 X 24 X 58 In. (72.3 X 61 X 147.3 Cm) With Training, Warranty, And Calibration" Qty: 1 Unit: Unit 5. Gel Electrophoresis Tank With Agarose Casting Trays "certifications/compliance: Ce Marked Description: Complete System With Buffer Exchange Ports Type: Large, W/buffer Exchange Ports Sample Size: 8 To 432 (16-, 24- And 36-well Combs) Volume (metric) Buffer: 2.3 L Dimensions (l X W X H): 14.8 X 12.8 X 4.1 In. (37.5 X 32.5 X 10.5 Cm) Length (english): 14.8 In. Length (metric): 37.5 Cm Length (metric) Gel: 25 Cm Width (english): 12.8 In. Width (metric): 32.5 Cm Width (metric) Gel: 20 Cm Height (english): 4.1 In. Height (metric):10.5 Cm Features: Horizontal System Can Run From 25 To 600 Samples On One Gel Gel Can Be Cast In Varying Lengths To Help Conserve Agarose When Fewer Samples Need To Be Run Built-in Buffer Exchange Ports Allow For Buffer Recirculation On Extended Runs Uvt Gel Tray Has Gasketed End Gates For Leakproof Seal Without Tape Built-in Leveling Ensures Flat, Uniformly Thick Gels Large Number Of Comb Slots Provides Sample Number And Resolving Distance Flexibility Microwell-format Combs Provide Fast, Error-free Sample Loading With A Multichannel Pipetter Samples May Be Loaded Directly From A 96-well Plate, 8 Or 12 At A Time With Training, Warranty, And Calibration" Qty: 1 Unit: Unit 6. Blue Light Transilluminator "features Compact, Extra-thin And Portable · Safer To Replace Uv · Easy For Gel Cutting: No Need To Wear Amber Glasses · No Dna Damage Inherent To Uv · Uniform Blue Led Trans-illumination, Low Noise · Optimized For Use With Diverse Safe Dyes To Replace Toxic Etbr · Angle Adjustable Filter/lid Can Be Tilted Optionally With One Hand, Easy For Observing And Cutting Gels. Specifications： · Instrument Dimensions (mm): 210d X 210w X 28h · Viewing Surface Dimensions (mm): 130d X 170w · Led Wavelength (nm): 470 · Lid/ Filter：amber · Sensitivity: Up To 0.1 Ng · Uniformity: < 5% Cv (coefficient Of Variance) · Led Life: 100,000 Hours With Training, Warranty, And Calibration" Qty: 1 Unit: Unit 7. Fume Hood "single Phase, Power: 220v, 60hz, Supply And Installation Of Unit Technical Parameters: Model: Fh 1500 (p) External Size (w D H): 1547x800x2450mm Internal Size (w D H): 1287x560x700mm Work Surface Height: 820mm Max Opening: 740mm Air Velocity: 0.3~0.8m/s Noise: ≤68db Exhaust Duct: 4.3 Meters, Φ250mm Led Lamp: 15w 2 Blower: Built-in Pp Centrifugal Blower(2 Blowers For Fh1800(p) Only); Speed Adjustable Front Window: Resistant To Acid And Alkali, Manual, 5mm Toughened Glass, Height Adjustable Power Supply: Ac220v±10%, 50/60hz; 110v±10%, 60hz Consumption: 500w Material: Main Body- Made Of Porcelain White Pp, Thickness 8mm, Resistant To Strong Acid, Alkali And Anti-corrosion; Work Table- Chemical Resistant Phenolic Resin Standard Accessory: Led Light, Work Table: Chemical Resistant Phenolic Resin, 4.3 Meters Pvc Duct (2 Pcs Of 4.3 Meters Pvc Dust For Fh1800(p) Only), Diameter: 250mm, Pipe Strap 2(4 Pcs For Fh1800(p) Only, Rvv Power Cord (3 1.0mm² 3000mm), Base Cabinet, Waterproof Socket 2, Tail Insert, Water Tap (pp), Gas Tap (pp), Water Sink, Pp Centrifugal Blower 1(2 For Fh1800(p) Only) Optional Accessory: Pp Worktable, Epoxy Resin Board Or Ceramic Board, Active Carbon Filter, Outer Pp Centrifugal Blower 1(only Need To Select When The Duct Is More Than 4m, 2 For Fh1800(p) Only), Splitable Base Cabinet (only Not For Fh1800(p)) Gross Weight: Main Body-180kg; Base Cabinet-114kg Or 102kg (splitable) With Training, Warranty, Installation, And Calibration" Qty: 1 Unit: Unit 8. Horizontal Laminar Flow Cabinet Control System: Microprocessor Controller With Lcd Display, Graphical And Digital Display Of The Operating Status Of Each Function Work Surface Height: 750mm Airflow Velocity: Adjustable, 0.2~0.5 M/s Cabinet Construction: Main Body: Electro-galvanized Steel With Antimicrobial Powder Coating Work Zone: Stainless Steel, Grade 304 Manual Sliding Sash: 5 Mm Uv Resistant Tempered Glass With Counter-balance System And Ergonomic Handle Side Windows: 5 Mm Uv Resistant Tempered Glass Electricity: Ac220v ±10%, 50/60hz,1p Standard Accessories Base Stand 1. Led Lamp 1(only 2 For Lcb-h6f). Uv Lamp 1(only 2 For Lcb-h6f). Waterproof Socket 2. Foma Casters 4 Wind Speed Sensor; Gas Tap;water Tap;casters With Brakes; Hook And Hook Bar With Training, Warranty, And Calibration" Qty: 1 Unit: Unit 9. Oven Dryer "300°c (pf 30 To Pf 200) Or 250°c (pf 400, Pf 800) Maximum Operating Temperatures 28 To 910 Litre Chamber Volumes •equipped With The R38 Digital Pid Temperature Controller (pf 30 To Pf 200) • Carbolite Gero 301 Controller, With Single Ramp To Set-point & Process Timer (pf 400 & Pf 800) • Fan Convection For Rapid Heating & Recovery & Excellent Uniformity • Chemically Resistant Stainless Steel Liner • Two Nickel-chrome Plated Wire Shelves (the Pf 400 Is Supplied With 3 Wire Shelves, The Pf 800 With 3 Perforated Stainless Steel Shelves) • Lever Latch Door & Airtight Silicone Seal With Training, Warranty, And Calibration" Qty: 1 Unit: Unit 10. Autoclave Sterilizer 150l Vertical Pressure Steam Sterilizer (autoclave) With A Large Capacity For Heavier Loads And An Automated Sterilization Process • Ensures Thorough Sterilization Of Your Products, Hassle-free. • Precise Temperature And Pressure Controls, Combined With Advanced Safety Features • 150l Or 158 Quart Size (equivalent To 5 All American 30 Quart Stove-top Pressure Cookers). • High Quality Sus 304 Stainless Steel Internal Construction. 6kw Electric Heater (110v/60hz, 63a) Get To Pressure In 25 Mins. • Quick Heating Means Faster Turnaround Times. Sterilize Grain Spawn Perfectly. Temperature Is Adjustable And Can Be Used To Pasteurize. • Two Stackable Internal Baskets Make Loading And Unloading A Breeze • Safety Door Opening Mechanism, The Door Remains Locked As Long As The Chamber Is Under-pressure. Water Level Sensor With Automatic Shutoff & Over-pressure Bleed Off Valve. With Training, Warranty And Calibration Qty: 1 Unit: Unit 11. Dry Bath Incubator Adjustable Sizes For Tubes And Test Tubes 4 Block Touch Screen Dry Bath Controller: Pid Digital Temp Range: Ambient +5° To 130°c (ambient At 25°c) Temp Control Accuracy: At 37°c ≤ ± 0.5°c Temp Uniformity: At 37°c ≤ ± 1°c Timer Range: 0-99:59 Min Or Continuous Voltage: 200/240 V With Training, Warranty, And Calibration" Qty: 1 Unit: Unit 12. Molecular Laboratory Freezer Type: High-performance Refrigerator Capacity (english): 45.8 Cu. Ft. Capacity (metric): 1297 L Temperature (setpoint): 3°-7°c (5°c) Refrigerant: R290 Door Style: Glass No. Of Doors: 2 Shelves: 8 Wire Certifications/compliance: Ul, Cul, Energystar Display: Microprocessor Defrost: Automatic Monitoring Options: Alarm, Recorder Smart View Compatibility: Smart-vue Compatible Dimensions (d X W X H) Interior: 28.5 X 52.5 X 58 In. (72.4 X 133.4 X 147.3 Cm) Dimensions (l X W X H) Exterior: 36.6 X 56.5 X 78.5 In (93.1 X 143.5 X 199.4 Cm) With Training, Warranty, And Calibration Qty: 1 Unit: Unit 13. Micropipette (multichannel) "the Pipette Shaft Can Be Unscrewed And Is Entirely Autoclavable (121 °c). Functions: Pipetting, Reverse Pipetting, Mixing, Dispensing, Up To 300 Μl Also Gel-electrophoresis. Easy Calibration-technique For Making Quick Adjustments Of The Electronic, Without Tools. Limitations Of Use: Operating Temperature Of Instrument And Reagent Should Be Between +15 °c And +40 °c (59 °f To 104 °f) Vapor Pressure Up To 500 Mbar Viscosity: 260 Mpas For Viscous Media, The Speed Must Be Adjusted If Necessary. With Warranty And Calibration" Qty: 1 Unit: Unit 14. Vortex "lab Vortex Mixer Shaker Speed 0-2800rpm, Orbital, Diameter 4mm, 50/60 Hz Test Tube Mixer Touch And Continuous Modes With Warranty And Calibration" Qty: 1 Unit: Unit 15. Portable Microcentrifuge "max Speed (rpm): 7000 Max Rcf (xg) : 2680×g Rotor Capacity : 0.5/1.5/2.0ml×8, 0.2ml×32 Pcr Tubes, 0.2ml×4 Pcr 8 Strips With Warranty And Calibration" Qty: 1 Unit: Unit ------------------------------------------------------------------------------------------------------------------------------ Lot 2 | Total Cost: Php. 1,530,000.00 Technical & Scientific Equipment For Colleges 1. Casagrande Liquid Limit Apparatus Coverage S-log3, S- Gamut3, S-cinetone, User Luts Internal Mic + Inputs, Usb Streaming 3" 1.03m- Dot Vari-angle Lcd Touchscreen Qty: 1 Unit: Set 2. Basic Soil Sampling Kit 3-1/4″ Regular, Sand And Mud Auger, 5/8″ Thread ( 1 Each) 18″ Rubber Coated Cross Handle 5/8″ Thread 2″ X 6″ Soil Core Sampler Cup 2″ Soil Core Sampler Cap, 5/8″ Thread Regular Slide Hammer 5/8″ Thread Three 4′ Extensions, 5/8″ Thread 2″ X 6″ Plastic Liner 2″ Plastic End Caps (2) 12″ Crescent Wrench (2) Universal Slip Wrench 2″ X 12″ Nylon Brush Foam Padded Carrying Case With Handles And Wheels Qty: 1 Unit: Unit 3. Analytical Balance Digital Analytical Balance Capacity: 320 G Readabilility: 0.0001 G Repeatability: ±0.0003 Mg Linearity: 0.0002 Mg Stabilization Time: Approx. 3.5 Seconds Weighing Chamber: 6.45 × 5.84 × 9.88 In (164 × 149 × 251 Mm) Pan Size: Ø 3.6 In 90 Mm Dimensions: 8.54 × 17.4 × 12.24 In (217 × 442 × 316 Mm) Est. Weight: Approx. 17.6 Lb (8.0 Kg) Power: 120 Vac (ac Adapter) 50/60 Hz Qty: 1 Unit: Unit 4. Sieve Set Set Of Stainless-steel Wire Mesh Sieves Of 7.87-inch (200 Mm) Diameter, With Different Apertures Measuring Range 0.063 Micron - 0.32 In (8 Mm) Sample Specification Disturbed Sieves Diameter 7.9 In | 200 Mm Sieves Height 2 In | 50 Mm Sieve Openings 0.0025 In, 0.0035 In, 0.005 In, 0.007 In, 0.01 In, 0.014 In, 0.02 In, 0.028 In, 0.039 In, 0.079 In, 0.158 In, 0.32 In Qty: 1 Unit: Unit 5. Analytical Balance Digital Analytical Balance Capacity: 320 G Readabilility: 0.0001 G Repeatability: ±0.0003 Mg Linearity: 0.0002 Mg Stabilization Time: Approx. 3.5 Seconds Weighing Chamber: 6.45 × 5.84 × 9.88 In (164 × 149 × 251 Mm) Pan Size: Ø 3.6 In 90 Mm Dimensions: 8.54 × 17.4 × 12.24 In (217 × 442 × 316 Mm) Est. Weight: Approx. 17.6 Lb (8.0 Kg) Power: 120 Vac (ac Adapter) 50/60 Hz Qty: 1 Unit: Unit 6. Autoclave Sterilizer 150l Vertical Pressure Steam Sterilizer (autoclave) • With A Large Capacity For Heavier Loads And An Automated Sterilization Process • Ensures Thorough Sterilization Of Your Products, Hassle-free. • Precise Temperature And Pressure Controls, Combined With Advanced Safety Features • 150l Or 158 Quart Size (equivalent To 5 All American 30 Quart Stove-top Pressure Cookers). • High Quality Sus 304 Stainless Steel Internal Construction. 6kw Electric Heater (110v/60hz, 63a) Get To Pressure In 25 Mins. • Quick Heating Means Faster Turnaround Times. Sterilize Grain Spawn Perfectly. Temperature Is Adjustable And Can Be Used To Pasteurize. • Two Stackable Internal Baskets Make Loading And Unloading A Breeze • Safety Door Opening Mechanism, The Door Remains Locked As Long As The Chamber Is Under-pressure. Water Level Sensor With Automatic Shutoff & Over-pressure Bleed Off Valve. Qty: 1 Unit: Unit 7. Laboratory Oven Nominal Capacity 780 Liters • Max. Temperature 200°c Air Convection • Forced Power 4200 W • Internal Dimensions Mm (approx.)(lxdxh) 815x814x1201 External Dimensions Mm (approx.) (lxdxh) 1213x1214x1461 • Number Of Grid Shelves: 3 • Features Digital Pid Temperature Control System • High Temperature Uniformity And Precision Over Temperature Protection • Stainless Steel Internal And External Lining “linen Patterned” • Forced Convection Airflow 200°c Max. Temperature • Supplied Complete With Three Grid Shelves 3 Weight Approx.: 200 Kg Highlights • The Laboratory Ovens Are Specially Designed For Soil, Aggregates, And Asphalt Testing. • These Advanced Models Feature All Stainless Steel Internal And External Lining, With 60 Mm Thick Insulation, • Fast Heat Up, • Easy-to-read Digital Control, And • Forced Convection Airflow For Uniform Temperature Throughout The Oven Chamber. Easy To Slide Shelves. Qty: 1 Unit: Unit 8. Microscope Type: Compound Binocular Biological Microscopes Body: Aluminum Die-cast Metal Frame, Protective Plastic Covering Qty: 6 Unit: Unit 9. Multiparameter Waterproof Portable Logging Multiparameter Meter That Monitors Up To 14 Different Water Quality Parameters. The Microprocessor Based Multi-sensor Probe Allows For The Measurement Of Key Parameters Including Ph, Orp, Conductivity, Dissolved Oxygen, Qty: 1 Unit: Unit 10. Microscope Polarizing Trinocular Microscope Eyepieces And Magnification Wide Field Wf10x(¦µ22mm) • Dividing Eyepiece (field Number: ¦µ22mm) 0.10mm/div • Four Magnifications: 50x, 100x, 400x, And 600x Led Transmitted & Reflected • Trinocular Is Inclined 30 And Enable To Shoot In 100% Light Flux. • 10x Eyepiece Set. Pl 10x/22mm. High Eye-point For Ease Of Viewing When Wearing Eyeglasses. • Reverse Facing Quadruple Nosepiece! A Better Design That Allows Easier Access To The Slides Since Objectives Are Pointed Out Of The Way! • Objective Centering Screws On Nosepiece For Precise Alignment. Head – Interpupillary Distance – Diopter • Inclined Trinocular Head (easier To View Than 45 Deg. • Adjusts To The Distance Between Your Eyes: 50 To 80mm Interpupillary Distance. • Diopter Adjustment To Correct For Your Specific Vision Needs. Illuminating System • 3w Led, Brightness Enable Control. • Polarizer Can Be Rotated 360°. • Analyzer Can Be Rotatable 360° With Scale And Minimum Vernier. • Integrated Field And Aperture Diaphragm. Focus System • Coaxial Fine And Coarse Focusing Knobs On Both Sides Of Microscope. • Coarse Adjustment Travel Range: 28mm. (stage Movement Distance Up/down). • Fine Adjustment Division: 0.002mm. • Adjustable Lock Ring Stop To Limit Coarse Range To Protect Slides. • Tension Adjustable Coarse Focusing. • W/ 14mp Hdmi Camera Qty: 1 Unit: Unit 11. Muffle Furnace Size: 680"910 870 External Material: Cold Rolled Steel Carbon Steel Spraying Lnternal Material:ceramic Inner Chamber Weight : 111kg Voltage: 110v-220v Product Name: Muffle Furnace Max.temp.(c): 1300 Capacity(l): 6 Temp.accuracy: ±1℃ Consumption(kw): 6 Power Supply: 220/380v±10%,50/6ohz Heating Rate: 0-30℃/min Rising Time(empty): 30 Minutes Temp.uniformity: ±5℃ Heating Element: Nickel Chromium Alloy Wire Qty: 1 Unit: Unit

Details: Notice Of Proposed Procurement File Number: W8486-259794/b Tier: 1 (< $3.75m) This Bid Solicitation Cancels And Supersedes Pervious Bid Solicitation Number W8486-259794/a Dated 12 November 2024 With A Closing Date Of 04 December 2024 At 2:00pm Est. A Debriefing Or Feed Session Was Provided By Email To The Bidders/offerors/supplier Who Did Not Bid On The Previous Solicitation. This Requirement Is For The Department Of National Defence (dnd) For The Services Of One (1) Senior Life Cycle Management Specialist Under Stream 5, Technical Engineering And Maintenance Service. The Intent Of This Solicitation Is To Establish One (1) Contract For Two (2) Initial Years, With The Option To Extend The Term Of The Contract By Up To Three (3) One-year Irrevocable Option Periods Under The Same Conditions. This Solicitation Is Only Open To The Below List Of Pre-qualified Suppliers Under The Task And Solutions Professional Services (tsps) (sa) Number E60zt-18tsps. Time Frame Of Delivery: Asap Documents May Be Submitted In Either Official Language Of Canada. Rfp Documents Will Be E-mailed Directly From The Contracting Authority To The Qualified Supply Arrangement Holders Who Are Being Invited To Bid On This Requirement. Bidders Are Advised That The Rfp Documents Are Not Available On The Canadabuys Tender Management Application (https://canadabuys.canada.ca). The Tsps Method Of Supply Is A Result Of A Formal Competitive Process Which Was Established As A Result Of Extensive Consultations With Industry. The Method Of Supply Provides Suppliers With An On-going Opportunity To Become Prequalified For Participation In Future Bidding Opportunities. To Obtain More Information About How To Become A Pre-qualified Supplier For Tsps Please Contact Public Works And Government Services Canada (pwgsc). For General Information On The Various Pwgsc Methods Of Supply, Or To Obtain Specific Information On A Pwgsc Professional Service Method Of Supply, Please Visit Pwgsc's Canadabuys Tender Management Application Website At: Https://canadabuys.canada.ca/en/about-us/news-and-events/transition-canadabuys-tender-management-application#msg List Of Pre-qualified Suppliers : This Requirement Is Open The Following Suppliers Who Qualified Under The Stated Consultant Stream, Security Level, Region And Tier: 7351933 Canada Inc 9468269 Canada Corp. Acf Associates Inc. Adga Group Consultants Inc. Adirondack Information Management Inc., The Aim Group Inc. In Joint Venture Akkodis Canada Inc. Altis Recruitment & Technology Inc. Amyantek Inc Appian Corporation Cae Inc. Calian Ltd. Deloitte Inc. Fleetway Inc. Ipss Inc. Maverin Business Services Inc. Maxsys Staffing & Consulting Inc. Monz Consulting Inc., Newfound Recruiting Corporation. In Joint Venture Newfound Recruiting Corporation Norda Stelo Inc. Olav Consulting Corp., Moshwa Aboriginal Information Technology Corporation, In Joint Venture Procom Consultants Group Ltd. Prologic Systems Ltd. Promaxis Systems Inc Protak Consulting Group Inc., Soubliere Interiors Ltd., 2672486 Ontario Inc. In Joint Venture Reticle Ventures Canada Incorporated Softsim Technologies Inc.. T.e.s. Contract Services Inc. T.i.7 Inc., The Source Staffing Solutions Inc., In Joint Venture Talencity Inc. Technomics, Incorporated The Aim Group Inc. Thomas&schmidt Inc. Tiree Facility Solutions Inc. V42 Management Consulting, Inc. Valcom Consulting Group Inc. Additional Information For Bidders For Services Requirements, Bidders Must Provide The Required Information As Detailed In Article 2.3 Of Part 2 Of The Bid Solicitation, In Order To Comply With Treasury Board Policies And Directives On Contracts Awarded To Former Public Servants. Security Requirement: There Are Security Requirements Associated With This Requirement: Supplier Security Clearance Required: Secret Security Level Required (document Safeguarding): None Foci Review: None For Additional Information, Consult Part 6 – Security And Other Requirements, And Part 7 – Resulting Contract Clauses. For More Information On Personnel And Organization Security Screening Or Security Clauses, Bidders Should Refer To The Industrial Security Program (isp) Of Public Works And Government Services Canada (http://ssi-iss.tpsgc-pwgsc.gc.ca/index-eng.html) Website. Location Of Work : Region: Cfb Esquimalt Specific Location: Cfb Esquimalt Bidders’ Inquiries Inquiries Regarding This Request For Proposal Requirement Must Be Submitted To The Contracting Authority: Name: Jennifer Ouellet Email: Jennifer.ouellet2@forces.gc.ca The Crown Retains The Rights To Negotiate With Suppliers On Any Procurement.