Interior Tenders

Details: Description Bearing (6205 2rscm) Bearing (6004 2rscm) Bearing (6000 Zsm) Side Wheel Rim Assembly With Exterior And Interior And With Axle Size: 275/17

Details: Description Scope Of Works I. Masonry Works (inc. Plastering Of Dilapidated Walls, Fences, Columns And Const Of Countertop) Qty. Area= 158.20 Sq.m. Ii. Carpentry Works (room 1 &2, Vawc, Sk, Pb, Sec. And Stock Room) Qty. 1.0 Lot Iii. Installation Of Wooden Panel Door, Glass Door And Windows Qty. 1.0 Lot Iv. Steel Works ( Rehab And Const. Of Gates, Gaurdrails, Fences, Grill Doors And Windows Grills) Qty. 1.0 Lot V. Tile Works ( Inc. Tilling Of Countertop And Stairs) Qty. Area= 90.20 Sq.m. Vi. Comfort Room ( Health Center - Installation Of Faucet And Light) Qty. 1.0 Lot Vii. Roof Plumbing Works ( Inc. Installation Of Plumbing Vent) Qty. 1.0 Lot Viii. Painting Works (coverage: Lettering, Fences, Ceiling & Interior And Exterior Walls From 1st To 2nd) Qty. Area= 1,511.24 Sq.m. (3 Coats)

Purchaser Name: Ministry Of The Interior And Local Government | Description: Procurement Of Relief Goods Requested By Mp Dr. Susana Salvador-anayatin Intended For Orphanages And Communities That Are Currently Experiencing Food Scarcity Due To The Previous Flooding, Heavy Rain , Grocery Items ,ministry Of The Interior And Local Government - Barmm

Description: To the tender 'carpenter interior doors - Struckholt 27-29'

Purchaser Name: Ministry Of The Interior And Local Government | Description: Catering Services For Ramadhan 1446 Ah , Catering Services ,ministry Of The Interior And Local Government - Barmm

Details: Description 1 Plain Gi Sheet, Sch. 40 Galva 18 (1.1) 3 Pcs. 2 25mm X 6m, Plain Round Bar 1 Pcs. 3 3/4" X 20'; Gi Pipe. Sch.40 9 Pcs. 4 3/16" X 2" X 20', Flat Bar 12 Pcs. 5 5/8" X 20' Round Bar, Plain 3 Pcs. 6 Ordinary Welding Rod 20 Kg 7 Bolts And Nuts, 7/16" X 1" 48 Pcs. 8 Bolts And Nuts, 1/2" X 4" 9 Pcs. 9 1/2" X 20' Gi Pipe, Sch.40 18 Pcs. 10 12mm Square Bar, White 12 Pcs. 11 1/4" X 2" X 210' 1 Pcs. 12 Rim, Mug Wheel, 17 3 Pcs. 13 Coil Spring 3 Pcs. 14 Hub-4stud 3 Pcs. 15 Interior 300 X 17 3 Pcs. 16 Exterior 300 X 17 3 Pcs. 17 1 1/2" Rubber Bushing 9 Pcs. 18 Mug Wheel Bolt And Nuts 12 Pcs. *****nothing Follows Note: Partial Delivery Is Not Allowed

Details: Description Construction Of Funerary Chapel With Interior Design

Details: The U.s. Army Corps Of Engineers, New York District Is Seeking Manufacturers And/or Distributors Hydrant Drain Base-iron Casting (reference Attached Submittal 33 11 00-06 & Dep Watermain Std Dwg No. Wm0020) For W912ds24c0013 – Coastal Storm Risk Management, South Shore Of Staten Island, New York, Interior Drainage Area E. The Units Must Meet The Requirements Of Far 52.225-11, Buy American-construction Materials Under Trade Agreements. The Technical Requirements For These Units Are Described In The Attachments. To Be Compliant With Far 52.225-11, The Units Must Meet The Requirements Of The Acts As Defined In Paragraph 3 Below. technical Requirements four Hydrant Drain Base-iron Casting. Per Nycdep Specification Section 62.12.3 (b): “each Hydrant Must Be Connected To The Main With A 6-inch Diameter Branch Controlled By A 6-inch Valve Installed With Valve Box And Appurtenances As Shown On The Latest Revision Of Bwso Standard Drawing No. Wm0020, "standard Methods For Hydrant Drain Base””. Per Standard Drawing No. Wm0020, Note 1: “ Hydrant Drain Base Must Be Made In Accordance With The Department’s Latest Standard Specification For Iron Castings”. Documents Are Attached For Reference units Shall Be Used In Nyc Dep Projects, And It Meets The Std Dwg Wm0020, & Specification Section 20.07 Iron Castings. . units Shall Meet The Requirements Of Far 52.225-11 Buy American- Construction Materials Under Trade Agreements. far 52.225-11 Buy American- Construction Materials Under Trade Agreements: The Buy American Act (baa) Provides A Preference For Domestic Construction Materials Mined, Produced Or Manufactured In The United States. sources Sought Information: manufacturer's Name, Address, Phone Number And Point Of Contact. name Of The Country Where The Units Are Manufactured. unit Cost For The Four Hydrant Drain Base-iron Casting catalog Cut Of The Four Hydrant Drain Base-iron Casting Demonstrating That They Meet The Technical Requirements Outlined In The Attached Specification. whether The Units Were Available In 2024 And If Not, When They Became Available. manufacturers Certification That The Product Is An End Product And Meets The Requirements Dictated And Defined In Far 52.225-11. all Interested Businesses Should Submit Their Responses In Writing By E-mail To The Following: nicholas Emanuel, Contract Specialist E-mail: Nicholas.p.emanuel@usace.army.mil this Is Not A Commitment On The Part Of The Government To Award A Contract As A Result Of This Notice Or To Pay For Any Information Received. This Synopsis Neither Constitutes A Request For Proposal Or Invitation For Bid, Nor Does It Restrict The Government To An Ultimate Acquisition Approach. This Sources Sought Synopsis Should Not Be Construed As A Commitment By The Government For Any Purpose. The Government Does Not Intend To Rank Submittals Or Provide Any Reply To Interested Firms. Submittals Will Be Used For Market Survey Information Only. place Of Performance father Capodanno Blvd & Sand Ln, Staten Island, Ny 10305 this Market Research Will Be Posted For 15 Days

Purchaser Name: Department Of The Interior And Local Government | Description: Catering Service (bcfo: Ltia Meetings For Cy 2025) , Catering Services ,department Of The Interior And Local Government - Car

Details: 52000qr250011453 naics Code 336611 product Code 7320 this Is A Combined Synopsis/solicitation Nr 52000qr250011453 For A Commercial Items Prepared In Accordance With The Format Outlined In Far Subpart 12.6, And As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation. Quotations Are Being Requested And A Written Solicitation Will Not Be Issued. The Naics Code For This Solicitation Is 336611. The Small Business Size Standard Is 1500. This Is A Total Small Business Set Aside; All Responsible Small Business Sources May Submit Proposals That Will Be Considered. This Synopsis/ Solicitation Is Issued Pursuant To Far 13.106-1(b), And The Resultant Purchase Order Will Be Awarded On A Firm-fixed Price Basis Using Simplified Acquisition Procedures In Accordance With Far 13. the United States Coast Guard Surface Force Logistics Center Request The Contractors To Provide Pricing For The Following: uscgc Harriet Lane Galley Undercounter Freezer requirements undercounter Freezer Information: cospolich Model Number: Ucf20-2m-snm-mlr, Cospolich 304 Stainless Steel, Shipboard Modular Undercounter Freezer dimensions: 71” Wide X 24” Deep X 28” High 115 Vac, 1 Phase, 60 Hz, 404a Refrigerant hinge: Standard; Iaw Cospolich Drawing: 94088 accessories: electronic Controls W/led Light Driver front-breathing Grill Assembly (gr43-fb-ec) 12” Led Interior Light (ledlite35) adjustable Legs ships Forces Will Be Installing The Units. Must Be A Cospolich Model No. Ucf20-2m-snm-mlr Due To Meeting Marine, Mil Spec, Naval Shipboard Appliance And Unit Will Fit Through Shipboard Watertight Door. reference(s): technical Manual: shipboard Galley Refrigerator/freezer 270-wmec-2841_651_c place Of Delivery the Primary Place Of Performance Shall Be At Cgc Harriet Lane Located At Below Address: cgc Harriet Lane 400 Sand Island Parkway honolulu, Hawaii 96819 contracting Officer Technical Representative (cor): cwo Ben Peavey cell: (305) 898-1668 Email: Benjamin.r.peavey@uscg.mil b. As Stated Below, The Provision At Far 52.212-2, Evaluation-commercial Items- Applies With The Following Addenda: award Of A Contract Will Be Based On The Following Criteria: The Purchase Order Will Be Awarded As A Firm Fixed Price Contract Using Simplified Acquisition Procedures In Accordance With Far Part 13.5. 1. Please Provide Any Warranty Information. 2. Vendors Must Be Registered In Www.sam.gov the Government Will Award A Purchase Order Resulting From This Synopsis/solicitation To The Responsible Contractor Whose Quote Conforming To The Solicitation Will Be More Advantageous To The Government, Price And Other Factors Considered. interested Offerors Having The Expertise As Required Are Invited To Submit A Firm Fixed Price Proposal That Will Be Considered By The Agency. Proposals Must Be Submitted On Company Letterhead Stationery And Must Include The Following Information ( 1) Cost Breakdown, (2) Labor Cost, (3) Extended Price, (4) Total Price, (5) Payment Terms, (6) Discount Offered For Prompt Payment, (7) Company Duns And Cage Code. quotes Must Be Received No Later Than 07 March 2025 At 12:00pm Eastern Standard Time. Email Quotes Are Acceptable And Should Be Sent Joshua Miller At Email Address – Joshua.n.miller@uscg.mil. offerors Shall Include A Completed Copy Of The Provision At Far 52.212-3, Offeror Representations And Certifications-commercial Items, With Their Offer Or Have Provision Far 52.212-3 Submitted Into Www.sam.gov. Any Questions Or Concerns Regarding Any Aspect Of This Rfq Must Be Forwarded To Contracting Officer, Joshua Miller Via Email: Joshua.n.miller@uscg.mil provisions / Clauses: the Following Far Clauses And Provisions Apply To This Acquisition And Are Incorporated By Reference: far 52.212-1 - Instructions To Offerors - Commercial Items (oct 2018) far 52.212-2 - Evaluation - Commercial Items (oct 2014) Award Will Be Made To The Offeror Proposing The Best Value To The Government Considering Specification, Price, Past Performance And Quality. far 52.212-3 - Offeror Representations And Certifications - Commercial Items (oct 2018) To Include Alt I (oct 2014). Offeror Is To Complete The Annual Representations And Certification Electronically Via The System For Award Management (sam) Web Site Accessed Through Http://www.sam.gov . far 52.212-4 - Contract Terms And Conditions -commercial Items (oct 2018) With The Following Addenda's. far 52.212-5 - Contract Terms And Conditions Required To Implement Statutes Or Executive Orders - Commercial Items (jan 2019) far 52.252-2 - Clauses Incorporated By Reference (feb 1998), The Full Text Of The Clause May Be Accessed Electronically At Internet Address Http://farsite.hill.af.mil/vffara.htm; A Data Universal Numbering System (duns) Number Is The Primary Identifier In Far 52.204-7 - System For Award Management (oct 2018). contractors Are Located And Identified In Sam By Their Duns Number. To Facilitate Payment Via Electronic Funds Transfer - Sam, Contractors Should Be Registered In Sam. A Duns Number Can Be Obtained Via Www.dnb.com And Sam Registration Can Be Obtained Via Www.sam.gov. the Following Clauses And Others As Indicated By The Contracting Officer As Applicable Shall Apply To This Awarded Contract. far 52.222-3 - Convict Labor (jun 2003) far 52.222-19 - Child Labor Cooperation With Authorities And Remedies (jan 2018) far 52.222-35 - Equal Opportunity For Veterans (oct 2015) (38 U.s.c. 4212) far 52.222-36 - Equal Opportunity For Workers With Disabilities (jul 2014) (29 U.s.c. 793) far 52.222-37 - Employment Reports On Veterans (feb 2016) (38 U.s.c. 4212) far 52.222-50 - Combating Trafficking In Persons (jan 2019) far 52.223-18 - Encouraging Contractor Policies To Ban Text Messaging While Driving (aug 2011) far 52.225-1 - Buy American Supplies (may 2014) far 52.225-13 - Restrictions On Certain Foreign Purchases (jun 2008) far 52.232-33 - Payment By Electronic Funds Transfer - Systems For Award Management (oct 2018) far 52.233-3 - Protest After Award (aug 1996) far 52.233-4 - Applicable Law For Breach Of Contract Claim (oct 2004) 52.222-11, Subcontracts (labor Standards) (may 2014) (deviation Feb 2025) 52.222-12, Contract Termination—debarment (may 2014) (deviation Feb 2025) 52.244-6, Subcontracts For Commercial Products And Commercial Services (jan 2025) (deviation Feb 2025) the Above/following Clauses Are Incorporated By Reference, Entire Clause(s) Available At Http://www.arnet.gov/far. notice To Offerors Concerning Representations And Certifications: this Solicitation Contains Far Clause 52.204-7, Central Contractor Registration And Far Provision 52.204-8, Annual Representations And Certifications. In Accordance With Far 4.1201 (a) Prospective Contractors Shall Complete Electronic Annual Representations And Certifications Sam Accessed Via Https://www.acquisition.gov. Please Ensure Completion Prior To Submission Of Your Quote. Also Note That Paragraph (b) Of Far 52,204-8 Applies.