Housekeeping Tenders

Details: Va256-13-r-0873 page 18 Of 46 sources Sought Notice Only: description: This Is A Sources Sought To Determine The Availability Of Potential Sources Having The Skills And Capabilities Necessary To Provide The Specified Requirement. All Interested Vendors Are Invited To Provide Information To Contribute To This Market Survey/sources Sought Including Commercial Market Information. this Is Not A Solicitation Announcement. This Is A Sources Sought Synopsis Only. Questions Shall Be Submitted By Email To Jennifer.adams7@va.gov. Provide Only The Requested Information Below. The Purpose Of This Sources Sought Is To Gain Knowledge Of Potential Qualified Sources And Their Size Classifications (service Disabled/veteran Owned Small Business (sdvosb/vosb), Hub Zone, 8(a), Small, Small Disadvantaged, Woman Owned Small Business, fss/gsa Contract Schedule Holders Or Large Business) Relative To Naics Code: 562112 Hazardous Waste Collection. Product/service Code: S205 Housekeeping Trash/garage Collection. The Size Standard Is $47m. responses To This Sources Sought Will Be Used By The Government To Make Appropriate Acquisition Decisions. After Review Of The Responses To This Sources Sought Synopsis, A Solicitation Announcement May Be Published On The Gsa Or Fbo Website. Responses To This Sources Sought Synopsis Are Not Considered Adequate Responses To The Solicitation Announcement. All Interested Offerors Must Respond To The Solicitation Announcement In Addition To Responding To This Sources Sought Announcement. Please Read The Statement Of Work Carefully Before Responding To This Rfi. period Of Performance April 1, 2024 Through September 30, 2024, With 3 Plus Option Years. specified Requirement: Network Contracting Office 16 (nco16) Is Seeking Sources For A Potential Contractor To Perform The Following Type Of Service For Medical Waste Removal At Several Sites Located In The Performance Work Statement (pws). Performance Work Statement General Services: contractor Shall Provide Regulated Medical Waste Services (rmw) To Include Reusable Sharps Containers Program Services To Include The Pickup Of Sharps Bio-hazardous Waste And Rmw, Storage, Transport. Destruction. Treatment. And Disposition Of Contents For The Gulf Coast Veterans Health Care System (herein Referred To As Va) At The Following Four Sites With One Site Having Two Locations: biloxi. Ms: 400 Veterans Ave, Biloxi, Ms 39531 pensacola, Fl: 790 Veterans Way. Pensacola. Fl 32507 eglin Air Force Base, Fl: 100 Veterans Way. mobile Outpatient Clinic, 4444 Demetropolis, Road, Mobile Al 36619 panama City Beach, Fl, 2600 Veterans Way, Panama City Beach, Fl 32408-7186 Specific Services: Provide Sharps Containment System: Contractor Shall Provide Services Including A Reusable Sharps Containment System Compliant With Centers For Disease Control (cdc) And National Institute For Occupational Safety And Health (niosh) Guidelines And Which Has Been Approved By The Va (nursing. Safety. Infection Control, And Gems Coordinator). Contractor Shall Provide Rigid Puncture Resistant Sharps Containers That Meet The American Society For Testing Materials (astm) Standard F213 -01 "standard Specification For Puncture Resistance Of Materials Used In Containers For Discarded Medical Needles And Other Sharps". Contractor Shall Provide Sharps Containers That Include Appropriate Sizes And Shapes, Opening Types (vertical Drop) And Closures (locking Mechanism) Mounting Brackets, Cans With Casters (to Hold And Transport), Training And Replacement For Sharps Collection And Containment Of Sharps Waste (defined Below). Sharps Containers Shall Be Of The Type That Lends Itself To Privacy Of Patient Information (example Be Of Solid Red In Color). Each Container Shall Meet All Requirements Of The Occupational Safety And Health Administration (osha) Regulation 29 Cfr 1910, 1030 'bloodborne Pathogens" And Be Registered As A Sharps Waste Container With The Food And Drug Administration (fda). Contractor Shall Provide Labor, Tools, Materials, Supplies, Appropriate Equipment, Transportation, And Supervision Necessary To Pick Up, Store, Transport, Decant, And Clean/sterilize Containers As Well As Destroy, Dispose Of, Document, And Invoice For Waste Removed From The Containers. Special Function Items Such As, But Not Limited To, Funnel Tops, Traps Wall Cabinets And Related Hardware, Shall Be Supplied By The Contractor At No Additional Cost To The Va. The Contractor Shall Provide Reusable Sharps Containment System Services For A Flat-rate Monthly Fee For Each Of The Sites/locations Identified. Services Shall Be Coordinated Between The Contractor And The Contracting Officer Representative (cor). "sharps Infectious Waste" Shall Be Considered For The Purpose Of This Contract To Include Hypodermic Needles, Syringes, And Scalpel Blades. The Term Does Not Include Any Hazardous Waste, Radioactive Waste, Pharmaceuticals. The Medical Center Will Be Responsible For The Segregating Of All Waste In Accordance With Federal, State, End Local Requirements. contractor Is Encouraged To Attend Site Visit/survey At The Biloxi Campus (due To The Largest Quantity/locations) To Verify The Quantity, Size, Locations Exchange Frequency For Reusable Sharps Containers. Existing Sharps Container S Locations (patient Rooms, Exam Rooms, Research Areas Lab Areas, Operating Rooms, Procedure Rooms, And Other Areas) And Sizes Will Be Used As A Guideline. The Size/count Of Containers Requiring Installation For Each Of The Sites/locations Will Be Provided Under Attachment A (building, Room Number, Size And Type Of Sharps Container) Which Is Currently Only In Draft Form. The Current Estimated Number Of Wall Mounted Units Is Subject To Site Visit/survey. attachment H Will Be Finalized And Provided By Amendment In Sufficient Time Prior To Proposal Due Date. Contractors Are Requested To Provide A Price For The Different Sizes And Types Whereby If Additional Ones Are Added In The Future The Firm Fixed Price Will Be Already Established. For The Reusable Sharp S Container Management Program, The Contractor Shall Supply And Install Al} Necessary Locking Mounting Wall Brackets. Floor Dollies And Countertop Stability Base Where Needed. Reusable Sharps Containers Shall Be Exchanged By An Employee Of The Primary Contracting Company At A Set Frequency To Ensure Sharps Containers Do Not Overfill. Containers Will Not Be Allowed To Be Filled Above The Manufacturer S Recommended Level. This Is A Safety Requirement And Will Be Strictly Enforced By The Va. The Unit Exchange Frequency May Vary From Area To Area. The Exchange Frequency Will Be Based On Patient Care Volume In Each Location. The Estimated Frequency Is At Least Weekly. The Needs Of Specialty Areas As Well As Restricted Areas Will Also Be Verified During The Site Visit/survey. The Contractor Shall Provide A Supply Of Clean/sterilized Reusable Sharps Containers To Be Kept On Site To Be Used In The Event That A Container Does Become Full Prior To The Contactor S Scheduled Exchange Visit And An Environmental Management Service (ems) Staff Member Will Then Replace Full Container With A New Empty One. Exact Storage Location To Be Determined By Ems. Contents Of Reusable Sharps Contents Shall Be Transported Off Station And Disposed Of As Rmw. This Waste Shall Be Billed Separately From Regulated Waste Collection. The Contaminated Reusable Sharps Containers Shall Be Cleaned, Disinfected. And Sterilized For Reuse. Reusable Sharps Containers Shall Not Be Cycled Through More Than 500 Times Or As Stated And Allowed By Applicable And Current Regulations. The Cost Of Any Replacement Sharps Containers Shall Be At The Contractor's Expense. phase In: The Contractor Shall Work With The Cor Or Designee To Pick-up And Remove Existing Sharps Containers, Waste, And Brackets. All Removed Brackets And Accessories Shall Be Provided To The Va Upon Removal. Contractor Shall Replace All Existing Sharp Container Brackets With Reusable Sharps Container Brackets And Containers To Include Wheeled Medication Carts. Contractor Shall Provide Containers That Comply With The Requirements Stated Above And With Federal, State, And Local Regulations Regarding Labeling. All Containers Shall Be Clearly Labeled With Biohazard Symbol And The Word "biohazard' Displayed On Them Along With Bar Code. The Removal Of Old Sharps Containers And Installation Of New Containers Shall Be Performed After Normal Duty Hours And/or On Weekends. Weekend Work May Be Performed Between The Hours Of 7 A.m. And 3:30 P.m. These Days And Times Are Necessary To Cause The Least Disruption To Patient Care. The Contractor Shall Be Responsible For The Repair Of Any Damage Caused During The Removal Of The Old Sharp Containers And/or Brackets Or Installation Of The New Sharp Containers And/or Brackets. This May Require Filling Holes (patching) And Painting By The Contractor. Paint Colors And Numbers Of The Paint To Be Used Will Be Provided By The Va To The Contractor So The Existing Colors Will Match The Existing Dã©cor. Installed Containers Shall Be At A Height To Meet American Act (ada) Requirements. It Is Anticipated That This Phase- In Shall Be Accomplished Within One Month. provide Regulated Medical Waste (rmw) Collection And Disposal Services: contractor Shall Provide Services Including The Provision Of Containers And Labels For Regulated Medical Waste, Chemotherapy Waste, And Pathological Waste, Pickup Of All Regulated Medical Waste Streams (sharps, Rmw, Residual Chemotherapy Waste Per Resource Conservation And Recovery Act (rcra), And Pathological Waste); Storage And Transport; Decanting, Examination, Appropriate Treatment. Incineration, Disposal, And Documentation Of Quantities And Weights Of Waste; Cleaning Of Containers; And Provision Of Legal Manifest Which Accurately Documents The Chain Of Custody From Point Of Pickup To Final Disposition. The Contractor Shall Provide These Services For Each Of The Site Locations Identified. the Contractor Shall Be Responsible For The Removal Of All Chemotherapy Waste Placed In The Medical Waste Storage Areas. The Ridge Yellow Containers Will Be Labeled So The Contractor Will Know The Final Disposal Is Incineration. The Yellow Containers Will Be Non-reusable And Supplied By The Va. The Invoices Must Note How Many Yellow Containers Are Removed At Each Site. the Contractor Shall Be Responsible For The Removal Of All Pathology Waste That The Va Staff Has Collected And Stored In Designated Refrigerated Unit To Await Final Pickup, Disposal, And Incineration. Prior To Contractor Transport. Ems Staff Will Ensure That The Appropriate Containers Are Closed And Labeled As To The Origin Of The Container For Tracking Purposes And Labeled "contaminated Specimens To Be Incinerated" Or "incinerate Only" safety Requirements And Training: Contractor Vehicles, Carts, Materials, Or Supplies Shall Not Be Left Unattended. Vehicles Shall Be Parked Only In Designated Area As Provided By Ems Staff. Contractor Shall Ensure That Its Staff Who Drive On Va Property Are Professional, Comply With All Facility Policies Such As Zero Tolerance For Sexual Harassment And Violence In The Workplace, Drug-free Workplace, And Safety. Contractor Shall Ensure That Facility Standards Are Followed Along With The Joint Commission Standards. Contractor Is Solely Responsible For All Spills Or Leaks During The Performance Of The Contract. The Contractor Agrees To Clean Up Such Spills And/or Leaks To The Satisfaction Of The Government In A Manner Which Satisfies The Applicable Regulations, At No Cost To The Government. The Contractor Shall Report To The Va Safety Officer Via The Cor All Spills, Regardless Of Quantity And All Personnel Exposures. Such Reports Shall First Be Reported By Telephone Within 30 Minutes Following The Incident And Shall Have A Follow Up In Writing No Later Than Seven (7) Days After The Initial Report. When Reporting A Spill, The Following Information Shall Be Famished (l) Quantity Spilled; (2) Exact Location Of Spill; (3) Containment Procedures Initiated: (4) Clean-up And Disposal Procedures; (5) Personal Injury Involved; (6) Assistance Required; And (7) A Narrative Summarizing All On-scene Visits Made By Local, State, And Federal Officials. Contractor Shall Not Dispose Of Any Chemical Containers Contaminated By Cleaning Chemicals In Any Location In The Facility Except As Specified By The Cor. Contractor Shall Comply With All Applicable Federal, State, County Regulations On Workers' Safety Standards And Related Training. All Contractor Personnel Involved In The Performance Of This Contract Shall Have Received Training Regarding The Handling Of Infectious Materials, And Emergency Procedures To Be Followed In Case Of A Spill Before Starting Work Under This Contract. Certification Of Such Training Shall Be Provided Within Fifteen Days Of Receiving Notice Of Award Of The Contract. Certification For Any New Contract Employees Shall Be Provided To The Contracting Officer Within Thirty (30) Days Of Receipt Or The Training. contractor Shall Provide Yearly In-service Training (at No Additional Cost To Va) To Va Employees, Upon Request Of The Va, To Establish Safe, Efficient, And Cost-effective Identification, Separation, Segregation, Packaging, Labeling, And Handling Of Medical Waste. Training Shall Include Methods On How To Identify And Handle Infectious Waste With Special Emphasis On Right To Know Compliance. Training Shall Also Include Applicable Requirements Of The Department Of Transportation (dot) As A Waste Generator. Va Will Provide A Conference Room For Training. Quality Control/assurance (contractor): The Contractor Shall Establish And Maintain A Complete Quality Control/assurance Program To Assure The Requirements Of The Contract Are Provided As Specified. The Contractor Shall Provide A Copy Or Their Quality Control/assurance Plan To The Contracting Officer With Their Proposal At Time Of Offer Due Date. Quality/performance Requirements Summary: As Stated Above The Contractor Shall Be Responsible For Their Own Internal Quality Control Program. The Government Will Perform Surveillance Of The Contractor's Performance Using The Performance Work Statement And The Performance Requirements Summary (see Technical Exhibit I) On The Next Page To Determine If The Contractor Exceeds, Meets, Or Does Not Meet These Standards. The Fact That The Government Is Performing Surveillance Of The Contractor's Performance Does Not In Any Way Relieve The Contractor From Performing Their Own Surveillance And Maintaining Acceptable Quality Levels. Nor Will Va Staff Directly Supervise Or Control The Employees Or The Contractor. even Though It Is Used As An "incentive" The Right To Exercise An Option Period Is Still At The Government's Discretion. performance Requirements Summary Matrix: the Government Shall Use These Standards To Determine Contractor Performance And Shall Compare Contractor Performance To The Acceptable Quality Level (aql). technical Exhibit I performance requirement/ Indicator performance Standard performance measure (aql) monitoring Method/method Of Surveillance incentive waste Collection/pickup For Both Rmw And Sharps Containers (section B3s) within Time Specified By Each Facility deviation) direct Observation. Random Sampling. And Customer Complaints positive Past performance & Exercise Option Period treat And Disposal Of Waste (section B3bi And B3b3) dispose Of In Accordance With Osha, Epa. & Local. State, And Federal Regulations deviation) direct Observation And Random Sampling positive Past performance & Exercise Option Period pickup-disposal documents-the Contractor Shall Provide Monthly Record Of The Weights For Medical Waste Picked Up And Disposed From Each Site (section B3k) final Documents Received Within 2 Weeks After The End Of The Month deviation) direct Observation And Random Sampling positive Past performance & Exercise Option Period contractor Shall Supply Annual Solid Waste Reports Of Weights And Costs For All Facilities To The Gems coordinator Via co And/or Cor (section B3k) by January 3 Of Each Year 100% (no Deviation) periodic Inspection. Annual positive Past performance & Exercise Option Period packaging, Materials And Labeling (include Bar Code): Contractor Shall Supply All Containers And Labels And Placards To Include Bar Coding Labels For Tracking. The Exception Is The Yellow Containers Discussed In Section B3b3. The Labels And Placards Are Necessary To Satisfy Federal, State And Local Laws For Package Content Identification, Transportation Over Public Thoroughfares And Transfer To Any Company Involved In The Destruction, Recovery, Or Burial Bio-hazardous Material. This Shall Also Be Part Of Contractor's Quality Assurance Program. Records: Contractor Shall Maintain A Log Of Regulated Medical Waste And Regulated "sharps Waste" Shipments Which Include Quantity Of Waste Shipped, Sources, And Delivery Points (note: This Requirement Shall Not Be Confused With Manifest Requirement Mentioned And Referred To Elsewhere). Records Shall Be Kept On File For A Minimum Of Three Years From Contract Expiration. Regulated Medical Waste Containers: Containers Shall Be Made Of Rigid Plastic Construction Designed To Prevent Puncture By Needles And Other Shams, Capacity Not To Exceed 96 Gallons, And Shall Include Locking Safety Handles Along With Appropriate Bio-hazard Warning Symbols Approved By The State And Federal Regulatory Agencies. Contractor Shall Maintain The Refuse Containers And Equipment In A State Of Satisfactory Repair (no Broken Wheels Or Lids, Sharp Points) And Appearance (free Of Dirt/old Paper Stickers) Determined By The Cor. Contractor Shall Have Containers Disinfected Inside And Out Using And Centers For Disease Control (cdc) Approved Disinfectant Before Returning Them To The Medical Center Or Clinics For Use. Disinfectant Material Safety Data Sheet (msda) Information Shall Be Provided By The Contractor To The Cor Prior To Use. license, Permits And Insurance: Contractor Shall Be Properly Licensed By Federal, State And Local Authorities To Provide Pickup, Removal And Disposal Of Biohazardous Waste And Insured. Contractor Shall Attach Copies Of Licenses, Permits, And Proof Of Insurance Indicated Above With Their Proposal At Time Of Proposal Due Date And Shall Maintain All Required Licensing, Permitting, And Insurance Throughout The Life Of The Contract. Contractor Shall Provide Name, Address, Contact Name And Telephone Number Of All Disposal Facilities To Be Used Under This Contract, With Their Proposal At Time Of Offer Due Date. Contractor Shall Make Complete Distribution Of The Waste To A Reliable Licensed Facility Approved By All Federal, State, And Local Regulatory Bodies For Disposal. Contractor Liability: Contractor Shall Assume All Liability For The Medical Waste Removed From The Va Property From The Time Of Pick-up Until The Total Distribution Of The Waste By Incineration, Sterilization, Or Other Disposal Method, Which Must Comply With Environmental Protection Agency (epa), Occupational Safety And Health Administration (osha), Cdc, Department Of Environmental Management For Applicable State, Department Of Environmental Quality (deq) For Applicable State, And/or Iaw Other Controlling Agency With Oversight Authority. Government Responsibility: Government Will Be Responsible For Properly Packaging And Storing Bio-hazardous Waste. manifest Documentation/report: 1. The Contractor Shall Provide Tracking Of Medical Waste From The Point Of Pickup, Through Use Of An Epa, Deq For Applicable State, And Dot Approved Manifest System. The Contractor Shall Provide Hard Copy Documentation (manifest Sheets) To Include Contactor's Company Information To The Center, Indicating Time And Date Of Pickup, Time And Date Of Incineration, And Weight Of Each Container Received (one Weight Exception Is For Panama City-mental Health Clinic Due To Box). Contractor Staff Shall Engage Only Authorized Ems Staff (cor Or Designee) To Sign Manifests Of Waste In Accordance With Dot And State Requirements. Contractor Shall Provide Final Copy Within Two (2) Weeks After The End Of The Month Of Service. 2. Contractor Shall Provide An Annual Solid Waste Report By January 31st Of Each Year. The Report Should Reflect Total Pounds Of Solid Waste Generated For The Year And Total Va Cost Of Disposal. Report Can Combine All Sites/locations. This Report Shall Be Forwarded To The Green Environmental Management System (gems) Coordinator By The Co And/or Cor. Transportation: Contractor Shall Provide Transportation In Compliance With Dot Regulations. Trucks Shall Have Leak-proof Compartments For Containing Medical Waste And Shall Have Built-in Spill Control Technology. Contractor Shall Provide Proof Of Access (ownership/rental Agreement) For Trucks To Be Used Under This Contract With Their Proposal At Time Of Offer Due Date. Vehicles Shall Be Properly Disinfected As A Result Of Leaks Or Spills. Contractor Shall Immediately Notify The Department Of Health (doh) For The Applicable State, And The Va, If A Vehicle Is Involved In A Spill Or Accident Which Renders The Vehicle Non-compliant With Applicable Rules And Regulations. contingency Planning: The Contractor Shall Develop And Submit To The Contracting Officer, A Copy Of Their Contingency Plan In The Event Of Vehicle Breakdown, Disposal Facility Breakdown, Natural Disaster, Or Employee Strike. The Contingency Plan Shall Include Plans For Emergency/hazmat Response And Provide A Full Complement Of Safety Equipment. The Contingency Plan Shall Include Notification Procedures For Informing The Cor Of Any Actuation Of The Contingency Plan To Prevent Possible Violation Of Interstate Laws. Contractor Shall Provide This Plan With Their Proposal At Time Of Offer Due Date. contractor's Facility: The Va Reserves The Right To Thoroughly Inspect The Contractors' Facilities And Treatment Plant To Assure Acceptable Standards Of Performance. contractor Personnel: The Number Of Contractor Personnel Shall Be Adequate To Perform Daily Work Efficiently And Maintain Required Professional Standards. Truck Drivers Shall Be Able To Present A Valid Operator's License/permit When Requested And Shall Be Thoroughly Acquainted With And Comply With Va Traffic Regulations. Contract Personnel Shall Report To The Cor Or Ems Designee Upon Arrival And Departure Of Each Facility. Contractor Shall Notify The Cor Of Any Problems Or Delays With Containers, Transportation, Storage, Or Other Significant Problems. identification Badges (id): Within Five (5) Working Days Of Contract Award The Contractor Shall Provide The Names Of Personnel (including Subcontractors If Applicable) That Will Be Working Under This Contract By Completing A Contractor's Id Badge Worksheet, See Attachment G. The Contracting Officer Will Forward To Human Resources Fingerprinting Section, Prior To Commencement Of Work. Contractor Personnel Shall Report To Hr With Two Forms Of Id, Most Commonly Driver's License And Social Security Card. An I9 Form Will Be Signed And Fingerprints Taken. The Individuals Will Then Be Given Further Instructions To Obtain Their Photo Identification (id) Badge Including Company Name. Badges Will Be Worn At All Times While On The Premises Of The Va. Badges Will Be Placed In A Visible Location, Above The Waist, Clipped To The Front Of Wearing Apparel With Photo And Name Clearly Visible. Identification Badges Will Be Turned Into The Cor Within Ten (10) Working Days Of Contract Expiration Or Within Ten (10) Working Days If An Employee Leaves The Contractor's Company. The Cor Will Then Forward The Badges To Appropriate Va Staff Within Five (5) Working Days. charges For Net Weight: The Contractor Stall Charge Only For The Net Weight Of Waste Excluding Weight For The Containers. Net Weight Is To Be Shown On Each Manifest At The Time Of Pick Up, (one Weight Exception Is For Panama City Mental Health Clinic Due To Box). untimely Services: In The Event That Service Is Not Furnished Within The Scheduled Or On-call Time Frames Specified In This Solicitation For Each Location, The Va Reserves The Right To Obtain The Services From Another Source And To Charge The Contractor With Any Costs Which May Result Thereof. delivery Schedule- Locations/pickups: Contractor Shall Provide Scheduled Pick-up And Delivery For Rmw As Stated Below Unless Contractor Provides An Alternate Day(s) For Approval By Noting It Next To The Location Below If Necessary. Sharps Containers Pick-up Schedule Is To Be Determined Upon Completion Of Site Visit/survey And Will Be Included On Attachment H. va Medical Center (biloxi Division) Bldg.73 (back Dock) 400 Veterans Avenue biloxi, Ms 39531 rmw Schedule: 5 Times Per Week, Monday Through Friday joint Ambulatory Care Center (jacc) Room Ib-183 790 Veterans Way pensacola, Fl 32507 (this Facility Is Located Between The Naval Hospital And Navy Shopping Center Off Highway 98) Rmw Schedule: Once A Week, Thursday eglin Air Force Base Outpatient Clinic room 186 100 Veterans Way fl Walton Beach. Fl 32542 rmw Schedule: Every Other Thursday mobile Va Clinic room 1e104 4444 Demetropolis Road mobile, Al, 36619 rmw Schedule: Every Other Wednesday panama City Community Based Outpatient Clinic Cboc) 140 Richard Jackson Blvd. panama City, Fl 32407 rmw Schedule: Once A Week, Thursday panama City Mental Health Clinic [referred To As Magnolia] 2600 Veterans Way panama City, Fl 32408 rmw Schedule: Once A Week, Thursday Special Contract Requirements Services: 1. The Services Specified In The Sections Entitled Schedule Of Supplies/services (price). Performance Work Statement And Contained Anywhere Else Herein May Be Changed By Written Modification To This Contract Only By A Warranted Contracting Officer. 2. This Is A Non-personal Services Contract. There Is No Employer-employee Relationship Between The Va And The Contractor Or Contractor's Employee(s). 3. The Service To Be Performed By The Contractor Shall Be Performed In Accordance With Applicable Va Policies And Procedures, Along With All Federal, State, And Local Rules And Regulations That Govern The Collection And Disposal Or Medical Waste. term Of Contract: The Term Of This Contract Is April 1, 2024, Through September 30, 2024, With Four (4) Each 12-month Option Periods To Be Exercised At The Government's Discretion. All Option Periods Are Subject To The Availability Of Funds. hours Of Work: the Services Covered By This Contract Shall Be Furnished As Defined Herein. The Contractor Shall Not Be Required, Except During The Phase-in Process And In Case Of Emergency, To Furnish Such Services During Off-duty Hours Or Holidays As Described Below. the Following Terms Have The Following Meanings: work Hours: Monday Through Friday, 8:00 A.m. - 4:30 P.m. national Holidays: The Ten (10) Federal Holidays Observed By The Federal Government For This Requirement Are: federal Holiday date month new Year's Day 1 january birthday Of Martin Luther King Jr third Monday january washington's Birthday third Monday february memorial Day last Monday may independence Day 4 july labor Day first Monday september columbus Day second Monday october veterans Day november thanksgiving Day fourth Thursday november christmas 'day 25 december when A Federal Holiday Falls On A Sunday, The Following Monday Shall Be Observed As A Federal Holiday. When A Federal Holiday Falls On A Saturday, The Proceeding Friday Is Observed As A Federal Holiday By U.s. Government Agencies. Also Included, Would Be Any Other Day, Specifically Declared By The President Of The United States Of America To Be A Federal Holiday. The Va Will Be Closed On The Above Federal Holidays And Service Is Not Required On These Days. off-duty Hours: Friday Through Monday. 4:31 P.m. 7:59 A.m. Orders: A Task Order For Services Will Be Issued For Each Individual Site/facility. Contractor Shall Assign A Separate Account Number For Each Site/facility. Exception Is For Panama City Which Has Two Locations Included. qualifications Of Offers: Removed And Inserted In Addendum To 52.212-1 -instructions To Offerors. Quality/performance Monitoring: 1. The Objective Of Monitoring Contractor's Performance Is To Evaluate How The Contractor Is Performing And To Ensure Compliance With Key Requirements Of The Contract. 2. As Referred To In Section B3 Performance Work Statement This Monitoring Shall Be Accomplished By Utilizing Attachment D -quality Assurance Surveillance Plan (qasp). 3. Other Requirements Not Specifically Listed On The Qasp May Be Monitored Periodically But Will Not Be Subject To The Performance Measure. Payments: Payments Will Be Made In Arrears. Monthly Or Quarterly. Upon Electronic Submission And Receipt Of A Properly Executed Invoice For Services Rendered. Please Request Electronic Funds Transfer Payment Form (sf 3881) If Not Already In The Va's Financial Management System, Austin, Tx. Patient Privacy And Training: 1. Patient Privacy: Contractor Will Provide The Services To Collect, Manifest, Remove And Dispose Of Biohazard Medical Waste For The Va. As Such, Contractor Shall Follow The Privacy Act. 5 U.s.c Sec 552b, And 38 U.s.c Sections 5701, 7705, And 7332. Contractor And Its Employees May Accidently Come Across Va Patient Information; If So, The Incident Must Be Reported Immediately To The Cor Or Contracting Officer. Notwithstanding Any Other Provision Of This Contract, The Contractor And Its Employees May Not Disclose Patient Information And Are Subject To The Penalties And Liabilities Provided In The Statues And Regulations Mentioned Above For Unauthorized Disclosures Of Such Information. 2. Privacy Training: Contractors Are Required To Complete Approximately One (1) Hour Of Mandatory Annual Va Provided Privacy Training Which Will Be Provided By Co Before Any Work Begins Under The Contract. All Employees Of The Contractor Will Be Required To Participate In The Privacy Training And Will Acknowledge By Signature That They Have Reviewed The Training Materials. The Signed Documents Will Be Collected And Forwarded To The Contracting Officer Before The On-site Works Begins. The Contractor Shall Pay The Expense Of This Privacy Training Which Is Minimal. 3. Privacy Information: The Contract Employee, If No On-site Supervisor Available, Shall Secure In A Sealed Envelope And Relinquish Documents Found On Any Campus Or The Va That Contains Personally Identifiable Information Within 1 Hour Of Discovery. The Sealed Envelope Shall Be Hand Delivered To Mrs. Lisa Barnes, Gcvhcs, Information System Security Officer, Bld. 2, Room No. A 132, Or Phone: 228-523-5526 Or To Police Services, Building 17, 228-523-5100/5872 For Further Instructions If Not Located On Biloxi Campus. personally Identifiable Information: 1. The Term Personally Identifiable Information Means Any Information About An Individual Maintained By The Va, Including But Not Limited To. Education, Financial Transactions, Medical History, And Criminal Or Employment History And Information Which Can Be Used To Distinguish Or Trace An Individual's Identity, Such As Their Name, Social Security Number, Date Of Birth. Mother's Maiden Name, Biometric Records, Etc., Including Any Other Personal Information Which Is Linked Or Linkable To An Individual. Smoking Policy: 1. The Va Medical Facility And Cbocs Are Smoke-free Facilities. Smoking Is Not Permitted Within The Confines Of The Buildings Nor Is Smoking Permitted Within 50 Feet Of Any Door To The Facility. Smoking Is Permitted In Designated Areas Only. 2. Failure To Comply With The Smoking Policy Will Result In Immediate Removal Of Contractor/contractor Personnel From The Facility. Designation Of Contracting Officer's Representative (cor): The Cor Will Be Designated To Monitor And Certify The Receipt Of Services Rendered Under This Contract. The Cor Shall Have The Following Scope And Limitations Of Authority (a Formal Designation Letter Will Be Issued At Time Of Award): 1. Provide Schedules Of Service To Be Performed For The Government That Fall Within The Contract Work Scope. 2. Certify Acceptance Of Services Received In Accordance With The Contract Requirements. 3. Furnish Technical Guidance And Advice To Contracting Officer And Monitor Services Performed Under The Contract. 4. Report Any Deficiencies In Performance, Quality Of Service, Safety Practices And Questions On Contract Performance Or Suspensions Of Work To The Contracting Officer. 5. Certify Contractor Invoices For Payment Of Services Rendered In Accordance With The Contract Terms. this Delegation Of Authority Does Not Include Any Authority To Make Changes In Quantity, Quality, And Delivery. The Contracting Officer, Acting Within The Scope Of His/her Authority, Will Make All Changes To The Contract Especially Those That Will Affect Price, Quantity, Or Quality Of Performance Of This Contract. In The Event The Contractor Effects Any Such Change At The Direction Of Any Person Other Than The Contracting Officer, The Change Shall Be Considered To Have Been Made Without Authority And No Adjustment Will Be Mode To The Contract Price To Cover Any Increase In Costs Incurred As A Result Thereof. This Designation Is Issued Through The Term Of This Contract Commencing On The Date When The Va Contracting Officer Executes This Contract, Unless Revoked In Writing By The Contracting Officer. Hhs/oig: To Ensure That The Individuals Providing Services Under The Contract Have Not Engaged In Fraud Or Abuse Regarding Sections 1 128 And 1 128a Of The Social Security Act Regarding Federal Health Care Programs, The Contractor Shall Check The Health And Human Services - Office Of Inspector General (hhs/oig), List Of Excluded Individual/entities On The Oig Website (www.https://oig.hhs.gov) For Each Person Providing Services Under This Contract. Further The Contractor Shall Certify By Memo To The Co In Its Proposal That All Persons Listed In The Contractor's Proposal Have Been Compared Against The Oig List And Are Not Listed. During The Performance Of This Contract The Contractor Is Prohibited From Using Any Individual Or Business Listed On The List Of Excluded Individual/entities From The Above Website. Personnel Policy: 1. The Contractor Shall Be Responsible For Protecting The Personnel Furnishing Services Under This Contract To Carry Out This Responsibility, The Contractor Shall Provide The Following For These Personnel: workers Compensation income Tax Withholding, And Social Security Payments. 2. The Parties Agree That The Contractor, Its Employees, Agents, And Subcontractors Shall Not Be Considered Va Employees For Any Purpose. evidence Of Insurance Coverage: The Contractor Shall Furnish To The Contracting Officer A Certificate From His/her Insurance Company Indicating That The Contractor Has Obtained Liability Insurance Coverage As Outlined In The Far Clause 5228-5 Insurance Required For Work On A Government Installation" And Cl-120 "supplemental Nsurance Requirements" And That It May Not Be Changed Or Canceled Without Written Notice To The Contracting Officer. The Furnishing Of Such Evidence Of Insurance Coverage May Not Be Waived And The Certificate Of Insurance Shall Be Submitted With Proposal Or The Contractor May Furnish The Completed "notification Of Compliance With Insurance Requirements" As Included On The Next Page. This Is Also Required Of Any Subcontractors. requested Information: (1) Statement Of Cabability: Submit A Brief Description, Five (5) Pages Or Less, That Demonstrates How Your Company Has The Supervision, Facilities, Labor, And Experience To Perform The Scheduled And Unscheduled Pharmaceutical Waste Collection, Transport And Disposal As Described Above. Include Experience In Performing These Services To The Va, Other Government (federal Or State) Agency, Or For A Private Facility. Please Specify Your Availability To Start Date And Your Address. (2) Business Size And Socio-economic Status: (a) Indicate Whether Your Business Is Large Or Small (b) If Small, Indicate If Your Firm Qualifies As A Small, Emerging Business, Or Small Disadvantaged Business (c) If Disadvantaged, Specify Under Which Disadvantaged Group And If Your Firm Is Certified Under Section 8(a) Of The Small Business Act (d) Indicate If Your Firm Is A Certified Hub-zone Firm (e) Indicate If Your Firm Is A Woman-owned Or Operated Business (f) Indicate If Your Firm Is A Certified Service-disabled Veteran Owned Small Business (sdvosb) Or Veteran Owned Small Business (vosb) (g) Include The Duns Number Of Your Firm. (h) State Whether Your Firm Is Registered With The Beta.sam.gov At Https://beta.sam.gov And/or The Vetbiz Registry At Https://vetbiz.va.gov , (i) Note That Any Future Solicitation Could Only Be Awarded To A Contractor Who Is Registered In Sam And To Receive Award Based On Vosb Or Sdvosb Status You Must Be Registered In The Vetbiz Registry. responses Shall Be Submitted To 36c25624q0456 No Later Than 3pm Cst, Wednesday, February 14, 2024. Fax Or Telephone Calls Will Not Be Accepted. Your Response Should Include Both The Statement Of Cabability And Business Size And Socio-economic Status Information As Explained Above. Please Place "attention: Medical Waste Removal And Disposal Biloxi, Ms . This Is A Sources Only. A Solicitation Is Not Currently Available And May Not Develop From This Rfi. If A Solicitation Is Issued It Will Be Announced Later And All Interested Parties Must Respond To That Solicitation Announcement Separately From The Responses To This Announcement.

Details: Description Lot 1 - Foods And Beverages Services Nc Ii 1 200 Pieces Chair Dining Type : Dining Side Chair Body Shape: Square Material : Metal (round Or Square) Dimension: Total Height - 33" X 15" X 15" (minimum) Capacity: 150 Kg. Black Colored Powder Coated Frame With Foam On Seat Packed In Carton Box The Item Must Have Good Quality 2 8 Set Coffee Pot, 2 Pints Type: Manual Drip Body Shape: Round Material : Stainless Steel With Cover Capacity : 2 Pints Outside Diameter : 90 -110 Mm Over-all Height : 200 - 230 Mm Thickness : 0.5 - 1 Mm With Handle And Spout Packed In Carton Box The Item Must Have Good Quality 3 20 Pieces Container, Creamer Design: Type: Porcelain With Spout Body Shape: Circular, Material: Porcelain Diameter : 50 - 65 Mm Height : 80 - 105 Mm Color: White Appearance : Glossy White Packed In Carton Box The Item Must Have Good Quality 4 96 Pieces Cups And Saucers 5-6 Oz. 1. Material : Porcelain 2. Capacity : 5 Oz./140 Ml 3. Heatproof Up To 300 Deg. C 4. Color : White 5. The Item Must Be Of Good Quality 5 96 Pieces Fork, Cocktail 1. Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design 2. Type: Rounded Tip Handle 3. Over-all Length: 110-165mm 4. Width: 20-30mm (minimum) 5. Handle Thickness: 2mm To 4mm 6. Handle Length: 75-90mm 7. Small 8. Color: Silver The Item Must Be Branded And Have Good Quality. 6 96 Pieces Fork, Dessert Type: Dessert Fork Body Shape: Fork Shape, Round Tip Material/appearance: Stainless Steel, Highly Polished, With Plain Design, Rounded Tip Handle Length: 150mm-175mm Width: 20-30mm Handle Thickness: 1.5mm-3mm Number Of Tines: 4 Handle: 130mm (minimum) Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 7 96 Pieces Fork, Dinner Type: Dinner Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, With 4 Tines Over-all Length: 120-175mm Thickness Of Handle: 2-3mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 8 96 Pieces Fork, Fish Type: Fish Fork Body Shape: Fork Shape With Round Tip Material/appearance: Stainless Steel, Highly Polished, With Plain Design Over-all Length: 180-215mm Fork Width: 1.5mm-3mm Fork Thickness: 1mm-2mm Number Of Tines: 4 Length Handle: 120-130mm Handle Thickness: 2mm-3mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 9 96 Pieces Fork, Oyster Type: Oyster Fork Body Shape: Fork Shape Material: Stainless Steel, With High Polish Appearance, And With Plain Design Length: 90-120mm Thickness: 1mm-3mm Silver Color With Three Short Wide Curved Tines Packed In Plastic Pouch The Item Must Be Of Good Quality 10 96 Pieces Glass, Champagne Flute Type: Flute Glass Body Shape: Round Material: Clear Crystal Glass Dimension: Height: 20-24cm, Top Diameter: 50-70mm, Bottom Diameter: 60-80mm Capacity: 250ml (minimum) Thickness: 1.5-3mm Packed In Carbon Box The Item Must Have Good Quality 11 96 Pieces Glass, Collins Type: Tumbler Body Shape: Round Material: Clear Glass Capacity: 10oz To 14 Oz Thickness: 1.5-3mm (minimum) Packed In Carbon Box The Item Must Have Good Quality 12 96 Pieces Glass, Juice / Hi-ball 1. Material : Clear Glass 2. Type: Hi-ball 3. Height: 140-160mm 4. Bottom Diameter: 50-70mm 5. Top Diameter: 50-70mm 6. Thickness: 2-4 (minimum) 7. Capacity: 8oz. To 10oz. 8. Dishwasher Safe 9. The Item Must Be Branded And Good Quality Packed In Carton Box 13 96 Pieces Glass, Pilsner (ice Tea Glass) Type: Flaired Rim Body Shape (round Slender) Material: Clear Glass Capacity: 20oz. To 23oz. Over-all Length: 22-25cm Thickness Of Glass: 1-3mm With Flaired Rim And Slender Shape Packed In Carton Box The Item Must Have Good Quality 14 96 Pieces Glass, Red Wine Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter: 55-60mm Thickness: 1.5mm-3mm Over-all Length: 200-220mm Capacity: 250-300ml Stem Diameter: 6-8mm Stem Length: 85-90mm Base Diameter: 75-85mm Base Thickness: 2-4mm 15 96 Pieces Glass, White Wine Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter: 55-60mm Thickness: 1.5-3mm Over-all Length: 200-220mm Capacity: 270-300ml Stem Diameter: 6-8mm Base Diameter: 70-80mm Base Thickness: 2-5mm 16 16 Pieces Gravy Boats Type: Steel Type Body Shape: Boat Shape With Handle Material: Stainless Steel Capacity: 5oz. Appearance: Mirror Polish Finish Size :17cm X 7.3cm X 8.2 Cm / 6.7 X 2.9 X 3.2 Inches (minimum) The Item Must Have Good Quality Packed In Plastic Pouch 17 8 Sets Ice Bucket, 2 Liters With Tongs Type: Steel Type Body Shape: Circular Set Includes: A. Ice Bucket Material : Stainless Steel Diameter : 140 - 180 Mm Height : 140 - 170 Mm Thickness Of Bucket : 0.7 - 2 Mm Capacity : 2 Liters (minimum) The Item Must Have Good Quality 18 96 Pieces Knife Butter 1. Material : Stainless Steel W/ Highly Polished Appearance 2. Over-all Length : 140 Mm - 150 Mm 3. Handle Thickness : 3 Mm - 5 Mm 4. With Dull Edge And Rounded Tip 5. The Item Must Have Good Quality. Packed In Carton Box 19 96 Pieces Knife, Dinner Type: Dinner Knife Body Shape: Flat With Round Tip Material / Appearance : Stainless Steel Blade Highly Polished Handle Material : Stainless Steel Overall Length : 160 - 190 Mm Blade Thickness : 2 - 4 Mm Handle Thickness : 3 - 6 Mm Serrated Blade With Rounded Tip Packed In Carton Box The Item Must Have Good Quality 20 96 Pieces Knife, Fish Type : Fish Knife Body Shape: Flat With Pointed Tip Material / Appearance : Stainless Steel, Highly Polished W/ Plain Design Overall Length : 200 - 220 Mm Width Blade : 20 - 25 Mm Thickness Of Blade : 2 Mm - 4 Mm Thickness Of Handle: 3 Mm - 6 Mm Wide Blade, Dull Edge, Tip Made With A Notched Point Color : Silver Packed In Carton Box The Item Must Have Good Quality 21 8 Pieces Menu Folder Type: Leather Menu Folder Body Shape: Rectangular Material: Leather With 2 Partitions And 6 Inserts Size: 31.5cm X 24.5cm Color: Brown/black Applicable Paper Size: A4 22 24 Pieces Napkin Holder Type: Steel Type Body Shape: Rectangular Material : Stainless Steel With Highly Polished Appearance Dimension : Width : 70 - 90 Mm X Length : 150 - 170 Mm , Thickness : 0.7 Mm -2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 23 8 Pieces Order Pads Type: Numbered Pads Body Shape: Rectangular Material : 80 Gsm Offset Paper Each Pad Comes With A 100 Sheets And Corresponding Copy Page Each Pad Has Sequentially Numbered Orders To Make It Easy To Keep Track With 100 Sheets Per Pad And 10 Pads Included Can Take 1000 Orders Before You Run Out Packed In A Plastic Pouch 24 8 Pieces Pepper And Salt Mill Type: Pepper & Salt Mill Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices Preferably With A Packing Case Food Grade And Nontoxic Must Be Branded 25 32 Pieces Plate Covers Type: Steel Type Body Shape: Circular Material: Stainless Steel, Mirror Polished Diameter: 10 1/4 Inches (minimum) Height: 2 7/8 Inches (minimum) Thickness: 1/16 Inch. (minimum) With Handle Packed In Plastic Pouch The Item Must Have Good Quality 26 96 Pieces Plate, Dessert, 7” To 8” Type: Plain Type Body Shape: Circular Material: Porcelain Supply Must Be A Set, Consisting Of One (1) Of Each: 7 Inches And 8 Inches Plates Color : White Inner Diameter: 145 To 165 Mm Thickness : 3 To 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 27 96 Pieces Plate, Dinner, 10” Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Color: White Inner Diameter : 200 Mm - 215 Mm Outer Diameter : 250 - 260 Mm Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 28 96 Pieces Plate, Fish, 8” To 9” Type: Plain Type Body Shape: Circular Material : Porcelain With No Design Supply Shall Be A Set Consisting Of: One (1) Each 8 Inches And One (1) Each, 9 Inches Color : White Inner Diameter : 165 Mm - 190 Mm (minimum) Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 29 32 Sets Round Table (8’s) Type: Foldable Body Shape: Round Material: High Density Polyethylene Tabletop Powder Coated Steel Frame Size: 154cm X 74cm X4.5cm (minimum) Good For 8 To 10 Seater Capacity Tube Size : 28 Mm Diameter X 1 Mm Thickness Packed In A Carton Box The Item Must Have Good Quality 30 96 Pieces Salad Forks Type: Salad Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, With 4 Tines Length: 150 Mm - 175 Mm Thickness Of Handle : 2 Mm - 3 Mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 31 96 Pieces Salad Knife Type: Salad Knife Body Shape: Semi Rectangular Blade With Pointed Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Overall Length: 145 -160 Mm Blade Thickness: 2 Mm To 4 Mm Handle Thickness: 4 Mm To 6 Mm Handle Material: Stainless Steel Rounded Tip Handle Packed In Carton Box The Item Must Have Good Quality 32 96 Pieces Salad Plates 7” To 8” Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Supply Must Be A Set Consisting Of One (1) Each: 7 Inches And 8 Inches Plates Color: White Diameter (inner): 150 Mm - 165 Mm Thickness: 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 33 16 Pieces Salt And Pepper Shakers Type: Glass Type Body Shape: Square Material: Glass And Aluminum Over-all Height: 75 -90 Mm Length: 50 -60 Mm Width: 50 -60 Mm Aluminum Cover Packed In Carton Box The Item Must Have Good Quality 34 8 Pieces Sauce Ladles Type: Spouted Bowl Body Shape: Circular With Pouring Spout Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -230 Mm Ladle Bowl Length: 60 -65 Mm Long Ladle Bowl Diameter: 65 -70 Mm Depth: 10 -15 Mm Handle Details: 150-155 Mm Long X 20 -30 Mm Wide X 2 - 4 Mm Thick Color: Silver With Hang Hole For Hanging And Easy Access Dishwasher Safe Packed In Plastic Pouch The Item Must Have Good Quality 35 8 Pieces Server, Cake 1. Material : Stainless Steel Blade , Highly Polished Appearance 2. Over-all Length : 220 To 270 Mm 3. Width : 60 - 80 Mm 4. Thickness : 1.5 Mm To 2 Mm 5. Handle : 120 -140 Mm Long, Non-toxic Plastic 6. Shape : Shovel-shaped 7. Color : Silver 8. The Item Must Have Good Quality Packed In Carton Box 36 24 Pieces Service Forks Type : Service Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, W/ Palin Design Over-all Length: 220 Mm - 260 Mm Width: 20 - 25 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm 4 Tines Color: Silver Packed In Plastic Pouch 37 24 Pieces Service Tray Type: Plastic Body Shape: Rectangular Material: Plastic (pp) Size : 14 Inches X 18 Inches X 1 Inch (minimum) Color : Any Packed In Plastic Pouch The Item Must Have Good Quality 38 24 Pieces Show/service/base Plates 11” Type: Plain Type Body Shape: Round Material: Porcelain With No Design Supply Must Be A Set Consisting (1) Of Each: - 11 Inches; - 12 Inches; - 13 Inches, And - 14 Inches Plates Color: White Diameter, Inner : 225 Mm - 250 Mm Thickness: 3 Mm - 6 Mm Smooth And Glossy Surfaces 39 96 Pieces Side Plates Or Bread Plates 6” Type: Plain Type Body Shape: Round Material: Porcelain With No Design Color: White Inner Diameter: 95 Mm To 120 Mm Outer Diameter: 145 Mm To 170 Mm Thickness : 3 Mm - 6mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 40 16 Pieces Side Towels Type: Chef's Towel Body Shape: Rectangular Material: Oxford Polyester Soft Cloth Over-all Length : 640 - 680 Mm Over-all Width : 420 -460 Mm Color : Plain White Packed In Plastic Pouch The Item Must Have Good Quality 41 32 Pieces Silver Platter Type: Steel Type Body Shape: Round Material: Stainless Steel Diameter: 300 -330 Mm Thickness: 1 - 2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 42 96 Pieces Soup Bowl Type: Plain With Two Handles Body Shape: Circular Material : Porcelain Capacity : 24 Oz. (minimum) Packed In Carton Box The Item Must Have Good Quality Packed In A Carton Box 43 8 Pieces Soup Ladle Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Over-all Length : 220 -235 Mm Ladle Bowl Details: 60 -65 Mm Long, 60 -75 Mm Diameter, 10 -15 Mm Deep Handle Details: 145 - 155 Mm Long X 12 - 25 Mm Wide X 1.5 -3 Mm Thick Color: Silver With Hang Hole For Hanging And Easy Access 44 16 Pieces Soup Tureen Type: Steel Body Shape: Round Material: Stainless Steel Capacity: 7 - 11 Quart Size : 60 X 35 X 32 Cm (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 45 96 Pieces Spoon, Dessert Type : Dessert Spoon Body Shape: Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length : 175 To 190 Mm Thickness : 2 Mm - 3 Mm Shorter Handle : 120 -130 Mm Color : Silver Packed In Plastic Pouch The Item Must Have Good Quality 46 24 Pieces Spoons, Service Type : Service Spoon Body Shape: Oval Material: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 220 Mm - 250 Mm Width: 30 - 38 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm Color: Silver Packed In Plastic Pouch The Item Must Have Good Quality 47 96 Pieces Spoons, Soup (cream And Consume) Type: Soup Spoon Body Shape: Round Material/appearance : Stainless Steel, Highly Polished, W/ Plain Design, Rounded Tip Handle Over-all Length : 165 Mm - 200 Mm Smaller Oval Shaped Spoon Bowl And Tapers Slightly To The Tip Shorter Handle : 110 Mm - 170 Mm Thickness : 1.5 Mm - 3 Mm Color: Silver Packed In Plastic Pouch 48 96 Pieces Steak Knife Type: Steak Knife Body Shape: Flat With Serrated Edge Material: Stainless Steel Blade With Wooden Handle Length: 170 Mm To 203 Mm Handle Wood Thickness: 10 - 14 Mm With Serrated Blade Packed In Carton Box The Item Must Have Good Quality 49 20 Pieces Sugar Container Type: Glass Type Body Shape: Round Material: Glass With Brass Lid (or Equivalent) Diameter: 70 -80 Mm Height: 130 -140 Mm Capacity: 12 Oz. Packed In Carton Box The Item Must Have Good Quality 50 16 Pieces Table Cloth, 54 X 54 Inches Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Color: Plain White Dimension: L 54 Inches X W 54 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 51 8 Pieces Table Cloth, Rectangular Type: Plain Cloth Body Shape: Rectangle Material : Linen Size : 120cm X160cm (minimum) Color : Any Color But Not Black Feature: Washable Packed In A Plastic Pouch 52 120 Pieces Table Napkins, Cloth, 16” X 16” Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Or Its Equivalent Size: L 16 Inches X W 16 Inches (minimum) Color: Plain White Packed In Plastic Pouch The Item Must Have Good Quality 53 8 Pieces Table Skirting Cloth 90” X 90” Type: Plain Cloth Body Shape: Square Material: American Cotton Twill Cloth Color: Any Color Except Black Dimension: 90 Inches X 90 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 54 48 Pieces Table, Square/rectangular (4’s Or 6’s) Type: Foldable Plastic Body Shape: Square/rectangle Material: High Density Polyethylene Tabletop Powder Coated Steel Frame Dimension: 37 - 39 X 37 - 39 Inches Color: White Good For 4 Persons Packed In Carton Box The Item Must Have Good Quality 55 8 Pieces Tea Pot, 2 Pints Type: Porcelain Type Body Shape: Round With Handle And Pouring Spout Material : Porcelain Capacity : (2 Pint) Color : White Packed In Carton Box The Item Must Be Of Good Quality 56 96 Pieces Teaspoon Type : Tea Spoon Body Shape: Oval Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 120 Mm To 140 Mm Handle Thickness: 2 Mm To 4 Mm Short Handle Length - 100 Mm (minimum) Color: Silver Packed In Plastic Pouch The Item Must Have Good Quality 57 8 Pieces Tong, 8 Inches Type: Tong, 8 Inches Body Shape: Standard Material: Stainless Steel Size: 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 58 16 Pieces Toothpick Holder Type: Steel Type Body Shape: Round Material: Stainless Steel, Highly Polished In Appearance Diameter: 30 -35 Mm Diameter (minimum) Height: 65 -75 Mm Capacity: 1.24 Oz. (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 59 8 Pieces Tray Stand Type: Foldable Body Shape: Rectangular Material: Chrome Plated Metal Folding Tray Stand Length: 470 -490 Mm Width: 400 -440 Mm Height: 770 -790 Mm Packed In Plastic Pouch The Item Must Have Good Quality 60 8 Pieces Tray, Bill Folders/change 1. Material : Heavy Duty Plastic ( Abs ) Or Its Equivalent 2. Height : 190 - 220 Mm 3. Width : 120 -140 Mm 4. Thickness : 2 Mm To 3 Mm (minimum) 5. Color: Black 6. With Check And Pen Holder 7. The Item Must Have Good Quality Packed In Plastic Pouch 61 32 Pieces Tray, Round (bar) Type: Plastic Body Shape: Round Material: (pe/abs) Plastic Rubberized Surface, Non-slip/grip Tight Over-all Diameter: 345 -360 Mm (minimum) Thickness: 2 - 4 Mm (minimum) Color: Black Packed In Plastic Pouch The Item Must Have Good Quality 62 96 Pieces Water Goblet Type: Water Goblet Body Shape: Balloon-shaped Bowl Material: Crystal Clear Glass Over-all Length: 200 -220 Mm Capacity: 270 Ml To 300 Ml Rim Diameter - 55 -65 Mm Thickness: 1 Mm To 3 Mm Stem Length : 75 -85 Mm Stem Diameter : 6 -8 Mm Base Thickness : 3 -4 Mm Base Diameter : 7 -80 Mm Packed In Carton Box The Item Must Have Good Quality 63 24 Pieces Water Pitcher Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Height: 170 Mm To 220 Mm Top Diameter: 110 -120 Mm (approximate) Capacity: 1 - 1.5 Liter With Pour Spout Dishwasher Safe Packed In Plastic Pouch The Item Must Have Good Quality Lot 2 Cookery Nc Ii And Bread & Pastry Production Nc Ii 1 12 Pieces Apple Corer Type: Apple Corer Body Shape: Tubular Material: Stainless Steel Total Length: 18 Cm (minimum) Handle Material: Hard Plastic, Polypropylene Handle Dimension: Length-10 Cm X Diameter-2 Cm (minimum) Blade Size: Length-8cm X Diameter-2 Cm (minimum) Preferably With Packing Case Dishwasher Safe 2 3 Pieces Bain Marie, Table Type: Bain Marie Table (food Warmer) Body Shape: Rectangular Material: 304 Stainless Steel, 0.8 Mm Thick (minimum) Dimensions: Length-1500 Mm X Width-700mm X Height-800 Mm (minimum) Power Source: Voltage: 220 Volts - 230 Volts, 50 Hz/ 60 Hz With Royal Cord 1.5 Meter Long With Attachment Standard Type A Male Plug Or Provide Plug Adopter 10a/220v 3 3 Pieces Blender, Electric Type: Blender Machine Body Shape: Round Jar Material Housing: Plastic (polypropylene) Jar Height : 25 Cm To 28 Cm Jar Thickness: 4 Mm To 8 Mm Heat Resistant Glass Jar With Cover Source Voltage: 220 Volts / 240 Volts,50 Hz / 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v. Power Wattage: 300 To 700 Watts Blade: Stainless Steel, 3 To 4 Metal Blades 4 48 Pieces Board, Chopping/cutting, Plastic Type: Cutting Board Body Shape: Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 15 Inches (minimum) Width: 12 Inches (minimum) Thickness: 0.5 Inch (minimum) With Hole For Storage Purposes Preferably With Packing Case Food Grade And Dishwasher Safe 5 3 Pieces Boiler, Double Material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) 6 24 Pieces Braising Pan, Medium Type: Braising Pan Body Shape: Round Material: Enameled Cast Iron And Stainless Steel Size: Diameter: 28 Cm X Height: 10 Cm (minimum) Capacity: 4 Liters (approximate) With Stainless Steel Cover, Solid Cast Stainless Steel Side Handles And Riveted Handle On Both Side: Length: 10 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 7 3 Pieces Can Opener Type: Can Opener Body Shape: Materials: Stainless Steel Dimension: Length-21 Cm X Width 10 Cm X Depth:2.5cm (minimum) Multi-use: 3 In 1 Can Opener Also Opens Bottle Tops- Can Lids And Tabs 8 12 Pieces Casserole, Medium Type: Casserole Pot Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick Dimension: Diameter- 24 Cm X Height -14 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Preferably With Packing Case 9 36 Pieces Casserole, Small Type: Casserole Pot Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick Dimension: Diameter- 20 Cm X Height -12 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 10 6 Pieces Colander, Medium Type: Colander, Medium Body Type: Round Material: 304 Stainless Steel Diameter: 30 Cm (minimum) Capacity: 8 Quarts (9 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 To 10 Mm 11 12 Pieces Colander, Small Type: Colander (small) Body Shape: Round Material: 304 Stainless Steel Diameter: 26 Cm (minimum) Capacity: 5 Quarts (5.6 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Body Thickness: 0.8 Mm (minimum) Full-ring Support Base, 15 Cm Diameter Preferably With Packing Case Food Grade And Dishwasher Safe 12 24 Pieces Cup, Measuring (for Solid) Type: Measuring Cup Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 13 12 Pieces Dispenser, Paper Towel Type Paper Towel Dispenser Body Shape: Rectangular Material: Abs Plastic Dimensions: Length =260 Mm X Width =100 Mm X Height = 211 Mm (minimum) Capacity: 200 Paper Paper Size: Length-20 Cm X Width- 8 Cm (approximate) Mounting Style: Wall Mounted Tissue Box 14 3 Pieces Fan, Electric Stand Fan, Electric Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names 15 3 Pieces Fire Extinguisher (with Contents) 1. For Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2. Portable Type 3. Capacity: 5-6kgs 4. Rechargeable Cylinder Metal 5. Working Pressure Of Cylinder: 400 Psi 6. Brass Valve With Pressure Gage 7. With Rubberized Hose And Aluminum Nozzle Attached With Squeeze Lever To Discharge And Safety Pin 8. Painted With Metal Primer And Red Enamel Paint 16 3 Pieces Fish Poacher, Medium Type: Fish Poacher Body Shape: Oval Pot For Poaching Material: Stainless Steel, 0.64 Mm Thick Dimensions (l X W X D): 45 Cm X 15 Cm X 12 Cm (minimum) Handle Material: Stainless Steel Riveted Looped Handles On Both Side, 7 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 17 9 Pieces Fork, Carving Type: Carving Fork Body Shape: Square Shape Prong Prong Material: High Carbon Stainless Steel Overall Length: 30 Cm (minimum) Blade Dimension: Length- 15 Cm X Width- 0.5 Cm X Thickness- 0.3 Cm (minimum) Number Of Prongs: 2 Prong Comes With Square- Shaped Prongs And Pointed Tips Abs Plastic Triple-riveted Handle Preferably With Packing Case 18 24 Pieces Fork, Kitchen Type: Kitchen Fork Body Shape: Standard Material: Stainless Steel Dimension: Length - 32 Cm X Width- 3.5 Cm (minimum) Fork Size: Length: 8 Cm X Width -3.5 Cm (minimum) Handle :abs Plastic Number Of Tines: 2 Tines With Tapered End 19 6 Pieces Frying Pan, Large Type: Frying Pan (large) Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-30 Cm (minimum) X Height- 5.5 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 20 Cm Long (minimum) Preferably With A Packing Case Oven Safe Up To 250⁰f 20 24 Pieces Frying Pan, Medium Type: Frying Pan (medium) Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-24 Cm (minimum) X Height- 4.5 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 19 Cm Long (minimum) Preferably With A Packing Case 21 36 Pieces Frying Pan, Small Type: Frying Pan (small) Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-20 Cm (minimum) X Height- 3.8 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 12 Cm Long (minimum) Preferably With A Packing Case Oven Safe Up To 250⁰f 22 12 Pieces Funnel, S/s, Medium Type: Stainless Steel Funnel Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-15 Cm (minimum) X Height- 15.8 Cm (minimum) Tube Diameter: 2 Cm X Length: 7.3 Cm (minimum) Comes With Handle For Easy Hanging Preferably With Packing Case Dishwasher Safe 23 12 Pieces Funnel, S/s, Small Type: Stainless Steel Funnel Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-11 Cm (minimum) X Height- 10 Cm (minimum) Tube Diameter: 1.5 Cm X Length: 5 Cm (minimum) Comes With Handle For Easy Hanging Preferably With A Packing Case Dishwasher Safe 24 12 Pieces Garbage Bin Type: Swivel Lid Garbage Bin Body Shape: Round Material: Hard Plastic, Polypropylene Dimension: Diameter-26 Cm X Height-47 Cm (minimum) Capacity: 4 Gallons (minimum) Removable Dome Shape Lid With Spring Return Swivel Preferably With A Packing Case Color: Any Color 25 36 Pieces Glass Rack Type: Glass Rack Body Shape: Square Material: Polypropylene Plastic Overall Dimensions: Length - 19 1/2 Inches X Width - 19 1/2 Inches X Height - 4 Inches (minimum) Compartments: Full-size 25 Individual Compartment Glass Rack Compartment Dimensions: Length - 3 1/2 Inches X Width - 3 1/2 Inches X Height - 4 Inches (minimum) Easy Grip Handles Molded Into All Four Sides Preferably With A Packing Case 26 6 Pieces Ice Cream Scooper Type: Ice Cream Scooper Body Shape: Round Material: Stainless Steel Scoop: Diameter- 5 Cm X Deep-2.5 Cm (minimum) Handle Length: 10 To 12 Cm 27 24 Pieces Knife, Boning Type: Flexible Boning Knife Body Shape: Ergonomic Material: High Carbon Steel Overall Length: 28 Cm (minimum) Blade: Length-15 Cm X Width- 3 Cm (minimum), Pointed Tip Cutting Edge Angle From Tip To The Heel Is 13 To 14 Degrees Handle Length: 12 Cm (minimum) Handle Material: Hard Plastic Handle With Rivets Preferably Wiht Packing Case Dishwasher Safe 28 30 Pieces Knife, Chef Type: Chef's Knife Body Shape: Flat Materials: Stainless Steel Overall Length: 30 Cm (minimum) Blade Size: Length - 20 Cm X Width-4 Cm (minimum) Blade Thickness: 2.5 Mm (minimum) 29 6 Pieces Knife, Cleaver Type: Cleaver Knife Body Shape: Flat Blade Material: Forged Stainless Steel Heavy Duty Blade Length: 17 Cm (minimum) Overall Length: 30 Cm (minimum) Cutting Edge: Straight Handle Material: Ergonomic Wood Handle With Triple Rivets 30 12 Pieces Knife, Oyster Type: Oyster Knife Body Shape: Ergonomic Blade Material: Stainless Steel Blade Dimension: Length - 7 Cm (minimum) X Width - 2 Cm (minimum) Blade Thickness: 2 Mm (minimum) Handle Material: Smooth Wooded Handle Rounded Handle Size: Length-10 Cm X Diameter- 3.5 Cm (minimum) Total Length (from The Tip Of The Handle Up To Tip Of The Blade) :17 Cm (minimum) 31 3 Pieces Light, Emergency Emergency Light, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome 32 3 Pieces Meat Slicer Type: Meat Slicer Body Shape: Circular Housing Material: Die Cast Aluminum Alloy And Body Painted Dimensions: Width-40.5 Cm X Depth- 45.7 Cm X Height- 38 Cm (minimum) Stainless Steel Rotary Blade Diameter: 190 Mm (minimum) Power Source: 220 Volts-230 Volts, 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v 33 24 Pieces Pastry Tube Type: Pastry Tubes Body Shape: Tube In Different Shape Of Nozzles Material: Stainless Steel Set Contain: 24 Different Shapes Of Nozzles (minimum) Tube Height: 3.5 Cm To 5 Cm Tube Diameter: 2 Cm To 3.5 Cm Thickness: 0.5 Mm (minimum) Tube Tip: Assorted Designs (create Swirls, Rosettes, Flowers, Stars, Leaves And Other Designs 34 24 Pieces Peeler, Y-type Type: Y-type Peelers Body Shape: Ergonomic Material: Stainless Steel Overall Dimensions (l X W X H): 7 Inches X 2 1/4 Inches X 1 Inch (minimum) Blade Material: 304 Stainless Steel, 0.7 Mm Head Dimension: (l X W X H) 2 1/4 Inches X 2 1/4 Inches X 1 Inch (minimum) Handle Material: Stainless Steel Handle Length: 4 3/4 Inches X 1 Inch Diameter (minimum) 2 In 1 Design With 2 Blade Reel, Built In Potato Eye Remover And Hole For Hanger 35 24 Pieces Pepper And Salt Mill Type: Pepper & Salt Mill Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices Preferably With A Packing Case 36 24 Pieces Piping Bag Type : Piping Bag Body Shape: Triangular Material: Transparent Disposable Plastic For Dispensing Ingredients To Pastries Length: 9 Inches Minimum Width: 3 Inches (minimum) Volume: 500 Ml (approximate) 37 36 Pieces Plate Rack Type: Plate Rack Body Shape: Rectangular Material: 304 Stainless Steel Dimension: Length-475 Mm X Width- 290 Mm X Height- 380 Mm (minimum) 38 15 Pieces Preparation Table With Sink Type: Preparation Table With Sink & Shelves Body Shape: Rectangular Material: Stainless Steel, 1 Mm Thick (minimum) Dimensions: L-1200 Mm X W - 700 Mm X H - 850 Mm (minimum) Stainless Steel Tabletop And Stainless Steel Under Shelf Fully Welded Construction Sink: Left Side Single Bowl Sink With Drainer 4 Inches & Faucet Provision Sink Dimension (l X W X D) 400 Mm X 500 Mmx 25 Mm (minimum) 39 3 Pieces Pressure Cooker Type: Pressure Cooker Body Shape: Round Material: Polished Aluminum Dimension: Diameter: 32 Cm X Height: 25 Cm (minimum) Capacity: 10 Quarts (11.3 Liters) Side Handles For Secure Carrying Equipped With Safety Opening Mechanism, Spring Safety Valve, Rubber Seal Ring 40 12 Pieces Roasting Pan Type: Roasting Pan Body Shape: Rectangular Material: Stainless Steel Dimension: Length: 40 Cm X Width-35 Cm X Height -7 1/2cm (minimum) Thickness: 1.5 Mm Thick (minimum) Welded Handles On Both Sides Removable Stainless Steel Wire Rack 41 24 Pieces Scissor, Kitchen Type: Kitchen Scissor Body Shape: Ergonomic Blade Material: Stainless Steel, 2 Mm Thick Handle Material Heavy Duty Acrylonitrile Butadiene Styrene (abs) Plastic Overall Length: 20 Cm (minimum) Width: 7.5 Cm (minimum) 42 24 Pieces Siever, Small Type: Fine Mesh Siever Body Shape: Round Material: Stainless Steel Diameter: 20 Cm (minimum) Depth: 7 Cm (minimum) Twin Wire Handle: Length 20 Cm X 5 Mm Diameter (minimum) Fine Mesh: 0.7 Mm (1/32 Inch) (minimum) Preferably With A Packing Case 43 24 Pieces Skimmer, Fine Type: Medium Fine Mesh Skimmer Body Shape: Round Material: Stainless Steel, Polished Overall Length: 34 Cm (minimum) Skimmer Head: Diameter -10 Cm X Depth- 4 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle: Length- 12 Cm X Diameter- 2 Cm (minimum) Handle Has Hole For Hanging Preferably With A Packing Case 44 24 Pieces Skimmer, Spider Type: Skimmer, Spider Body Shape: Round Material: Stainless Steel, Polished Overall Length: 35 Cm (minimum) Skimmer Head Diameter: 15 Cm X Depth 4 Cm (minimum) Handle Length: 12 Cm X 2 Cm Diameter (minimum) Preferably With A Packing Case Dishwasher Safe 45 36 Pieces, Soup Cup Rack Type: Soup Cup Rack Body Shape: Square Material: Polypropylene Plastic Dimension: Length: 50 Cm X Width: 50 Cm X Height: 10 Cm (minimum) Compartment Length: 11 Cm Compartment Width: 11 Cm Compartment /inside Height: 6.7 Cm No. Of Compartment: 16 Compartments 46 6 Pieces Soup Ladle, 12 Oz Type: Soup Ladle Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 34 Cm (minimum) Capacity: 12 Oz. (341 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe 47 24 Pieces Soup Ladle, 3 Oz Type: Soup Ladle Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 28 Cm (minimum) Capacity: 3 Oz. (85 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe Must Be Branded 48 24 Pieces Soup Ladle, 6 Oz Type: Soup Ladle Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 6 Oz. (170 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe 49 6 Pieces Soup Ladle, 8 Oz Type: Soup Ladle Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 8 Oz. (236 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case 50 24 Pieces Spatula Type: Offset Spatula Body Shape: Flat Blade Material: Stainless Steel 316 Handle Material: Hardwood (smooth Finish) With Rivets Blade Dimension: Length= 7 .5 Inches X Width-1.5 Inches (minimum) Thickness Of Blade: 1.7 Mm Thick (minimum) Total Length: 12 To 14 Inches Preferably With A Packing Case Dishwasher Safe Must Be Branded. 51 24 Pieces Spoon, Kitchen Type: Kitchen Spoon Body Shape: Oval Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type Preferably With A Packing Case Heat Resistant Up To 220 ° C Dishwasher Safe Must Be Branded. 52 24 Pieces Spoon, Kitchen (slotted) Type: Kitchen Spoon Slotted Body Shape: Oval With Slot Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type With Slot At Least 6 Rectangular Slots Preferably With A Packing Case Heat Resistant Up To 220 ° C Dishwasher Safe 53 24 Pieces Spoon, Measuring Type: Measuring Spoon Body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. ( 7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) 54 24 Pieces Spoon, Parisienne Type: Parisiennes Spoon Body Shape: Round Double Headed Parisiennes Scoop Bar Tool Material: Stainless Steel, Polished Overall Length: 240 Mm (minimum) Scoop Diameter: 30 Mm And 24mm (minimum) With Plastic Handle (polypropylene), Size: 130 Mm X Width-20 Mm (minimum) Draining Small Hole In The Scoop 55 72 Pieces Spoon, Serving Type: Serving Spoon Body Shape: Oval Materials: Stainless Steel Dimension: Length: 23 Cm X Width: 5 Cm (minimum) Scoop Dimension (l X W X D): 7 Cm X 5 Cm X 0.9 Cm (minimum) Spoon Thickness: 1.6 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 56 24 Pieces Spoon, Wooden Type: Wooden Spoon Body Shape: Oval Material: Hardwood Dimensions: Length- 10 Inches X Width- 2 Inches (minimum) Bowl Dimension: Length -3 Inches X Width 2 Inches X Depth -3/4 Inches (minimum) Total Length: 10 Inches (minimum) Preferably With A Packing Case Smooth Surface Finished And No Sharp Edges 57 6 Pieces Stock Pot, Large Type: Stock Pot, Large Body Shape: Round Material: Stainless Steel, 0.8 Mm Thick (minimum) Top Diameter: 30 Cm (minimum) Height: 31 Cm (minimum) Capacity: 20 Quarts (22.7 Liters) Oven Safe To 350⁰f And Dishwasher Safe. With Aluminum Disc Layer In Bottom For Even Heat (5 Mm Aluminum 58 9 Pieces Strainer Chinois, Small Strainer Chinois, Small Body Shape: Conical Material: Stainless Steel Strainer Diameter: 14 Cm (minimum) Strainer Depth: 13 Cm (minimum) Handle Length: 15 Cm (minimum) With 1 Mm (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded 59 6 Pieces Strainer Chinois, Medium Type: Strainer Chinois, Medium Body Shape: Conical Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 21.5 Cm (minimum) Handle Length: 20 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded 60 24 Pieces Strainer Medium, Fine Type: Strainer, Medium Fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 7 Cm (minimum) Handle Length: 18 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Strainer’s Two Layers Of Tightly Woven Mesh Catches Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded. 61 24 Pieces Strainer Small, Fine Type: Strainer, Small Fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 13 Cm (minimum) Strainer Depth: 5 Cm (minimum) Handle Length: 13 Cm (minimum) With 1 Mm. (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded. 62 24 Pieces Tenderizer, Medium Type: Tenderizer Body Shape: Ergonomic Material: Cast Aluminum Overall Length: 26 Cm (minimum) Dual-sided Hammer, Square Head: 6 Cm X 6 Cm (minimum) Ridged Surface With Rows Of Dull, Pyramid-shaped Spikes Weight: 250 Grams To 500 Grams Preferably With A Packing Case Dishwasher Safe Must Be Branded 63 9 Pieces Thermometer, Pocket/pin Type: Pocket/pen Thermometer Body Shape: Tubular Pen Style Digital Thermometer Product Size: 100 Mm X 40 Mm X 14 Mm (minimum) Display Size: 40 Mm X 20 Mm (minimum) Prove Length: 200 Mm (minimum) Measuring Range: -50 °c To 300 °c (-58 ⁰f To 372 ⁰f) Resolution: 0.1 °c / 0.2 °f 64 24 Pieces Tong, 12 Inches Type: Tong , 12 Inches Body Shape: Standard Material: Stainless Steel Size: 12 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 65 30 Pieces Tong, 8 Inches Type: Tong, 8 Inches Body Shape: Standard Material: Stainless Steel Size: 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe 66 24 Pieces Tray, Baking, Small Type: Baking Tray Body Shape: Rectangular Material: Stainless Steel Dimension: 20 Cm X 30 Cm X 3.7 Cm (minimum) Body Thickness: 0.7- 1.0 Mm Preferably With Packing Case Dishwasher Safe Must Be Branded. 67 36 Pieces Tray, Utility Type: Utility Tray Body Shape: Rectangular Material: Stainless Steel Dimension: Length- 48 Cm X Width-32 Cm X Height-2.5 Cm (minimum) Reinforced Edges Finish: Polished Preferably With A Packing Case Washable And Oven Safe 68 24 Pieces Turner 3” X 6” Type: Slotted Turner, 3" X 6" Body Shape: Straight Material: Stainless Steel Blade Size (lx W): 6 Inches X 3 Inches (minimum) Handle Length: 5 Inches (minimum) Overall Length: 13 Inches (minimum) Solid Turner With Straight Slotted Blade Wooden Handle With Triple Rivets Preferably With A Packing Case Dishwasher Safe Must Be Branded 69 3 Pieces Utility Cart Type: Utility Cart Body Shape: Rectangular Material: Plastic, Polypropylene(pp) Dimension: (l X W X H) 84 Cm X 43 Cm X 95 Cm (minimum) Capacity: 330 Lbs (150 Kg) Loads (minimum) Three (3) Shelving With At Least 25 Cm Distance Between Shelves Tub Shelf Measure (l X W X D) 84 Cm X 43 Cm X 7 Cm (minimum) With Four (4) Swivel Caster, 10 Cm Diameter, Two Which Have Locking Brakes Preferably With A Packing Case Easy Grip Handles On Each End Of Cart 70 12 Pieces Weighing Scale, 1 Kg, Digital Type: Digital Weighing Scale Body Shape: Rectangular Materials: Engineering Plastic And Stainless Steel Weighing Plate Capacity: 1 Kg Accuracy: 1 Gram Back Light Lcd Display With 15 Mm Minimum High Digits Weighing Units: Gram, Ounce, Pound Size: L X W X H Mm ) 163 Mm X 245 Mm X 79 Mmm (minimum) 71 6 Pieces Weighing Scale, 5kg Type: Mechanical Weighing Scale Body Type: Circular Bowl Material: Stainless Steel Bowl And Metal Body (coated) Mechanism Type: Spring Lever Capacity: 5 Kg /11 Lb. Sensitivity/graduated By 10 Gm Measurement Units: Gram/kilogram Manual Setting On Zero, Must Be Accurate And Durable Calibrate The Scale Using The Adjustment Knob Preferably With A Packing Case Delivery Must Include Instruction Manual Written In Good English With Service Centers Located In The Major Cities In The Philippines Warranty Period Of 1 Year (parts And Service) Must Be Branded 72 24 Pieces Wire Skimmer, Small Type: Skimmer, Wire Mesh Body Shape: Round Material: Stainless Steel, Polished Overall Length: 40 Cm (minimum) Skimmer Head Diameter: 12 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle Has Hole For Hanging Preferably With A Packing Case Dishwashing Safe Must Be Branded. 73 6 Pieces Wire Whisk, Heavy Duty Type: Wire Whisk, Heavy Duty Body Shape: Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 74 24 Pieces Wire Whisk, Medium Type Wire Whisk, Medium Body Shape: Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 75 24 Pieces Wire Whisk, Small Type: Wire Whisk, Small Body Shape: Balloon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 20.3 Cm X 6 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 76 3 Pieces Wok, Medium Type: Wok, Medium Body Shape: Round Material: Carbon Steel Thickness: 1.8 Mm Thick (minimum) Dimensions (dia. X H): 45 Cm X 14 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 10 Cm (minimum) With Flat Bottom Preferably With A Packing Case Dishwashing Safe Must Be Branded. 77 12 Pieces Wok, Small Type: Wok, Small Body Shape: Round Material: Carbon Steel Thickness: 1.5 Mm Thick (minimum) Dimensions (dia. X H): 36 Cm X 10 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 8 Cm (minimum) With Flat Bottom Preferably With A Packing Case Dishwashing Safe Must Be Branded. 78 6 Pieces Working Table Type: Working Table, Stainless Steel Body Shape: Rectangular Material: 304 Stainless Steel, 1.29 Mm Thick (gauge 16) Minimum Length: 1220 Mm (minimum) Width: 700 Mm (minimum) Height: 850 Mm (minimum) Tubular Stainless Steel Legs, 38mm (minimum) With 4 Adjustable Bullet Feet Fully Welded Construction Thickness: Gauge 16 (1.29 Mm Thick) Minimum Stainless Steel Table Top With Stainless Steel Undershelf Distance Between Table Top And Undershelf Is 650 Mm (minimum) Preferably With A Packing Case Or Crate No Sharp Edges And Rough Surfaces Must Be Branded. 79 24 Pieces Zester Type: Cheese Zester Body Shape: Standard Material: Stainless Steel Grating Surface Dimensions (l X W): 20.3 Cm X 4 Cm (minimum) Overall Length: 32.5 Cm (minimum) Handle Material: Plastic (polypropylene) Ergonomic Handle Preferably With A Packing Case Dishwasher Safe The Plastic Material Used Must Be Non-toxic Must Be Branded. Bread And Pastry Production Nc Ii 1 2 Set Air Compressor With Airbrush Cake Decorating Set Tight-tolerance Head Provides Extremely Fine Atomization With Razor-sharp Detail Needle Backstop At The Rear Of The Airbrush Allows You To Pre- Set The Trigger Travel, Producing Consistent Line Widths Includes Pre-installed 0.2mm Nozzle (tip), Nozzle Cap, Needle, And Removable Needle Cap For A Spray Pattern Between Hairline And 3/4″ (20mm) Fine-finish, Stainless-steel Needle Minimizes Tip-dry Gravity-feed 2cc Color Cup Won’t Obstruct Your View During Fine Detail Work Solvent-resistant Needle Packing Allows Safe Use With All Types Of Spraying Mediums Uses Standard 1/8″ Bsp Air Hose Fittings 2 12 Pieces Beater 3 12 Pieces Board, Chopping, 6 Color The Item Shall Have The Following Specifications: 1) Material: Polypropylene, Food Grade 2) Board Size: Length: 18 Inches 3) Width: 12 Inches 4) Thickness: 0.75 To 1 Inch 5) Color: Assorted Colors, 6 Different Colors Per Set 6) With Hole For Storage Purposes 7) The Materials Used Must Be Non-toxic. 8) The Item Must Be Branded 4 2 Pieces Boiler, Double Material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) 5 24 Set Bowl, Mixing (6 Pieces/set) 6 12 Pieces Cake Pans, Round #4, #6, #8, #10, #12, #14, #16 7 12 Pieces Cake Stand, With Tier Type: Cake Stand With Tier, Food Grade Body Shape: Circular With 3 Tier Material: Hard Plastic, Polypropylene, 4 Mm Thick The Tier Consists Of The Following Sizes: Tier 1: 18 Cm Diameter (minimum) Tier 2: 25 Cm Diameter (minimum) Tier 3 : 30 Cm Diameter (minimum) Column Diameter: 20 To 30 Mm (solid) Distance Between Tiers: 15 Cm Over-all Length: 30 Cm (minimum) Assembled Column Is Used For Maximum Strength And Stability Of The Stand Must Be Packed In Set Smooth And No Sharp Edges 8 6 Pieces Cake Turn Table Type: Turn Table Body Shape: Circular Material: Cast Aluminum Plate And Cast Iron Base Upper Plate: 30 Cm Diameter (minimum) And 1.4 Cm Thickness (minimum) Base Dimensions: 18 Cm (minimum); 1.4 Cm Thickness (minimum) Total Height: 10 Cm To 15 Cm Turntable With Ball Bearing To Turn Easier Preferably Packed In Any Kind Of Packaging Comes With No Sharp Edges To Rotate Smoothly In 360 Degrees Clockwise Or Counter Clockwise 9 26 Pieces Coupler Type: Food Grade Body Shape: Tubular Material: Hard Plastic, Polypropylene, Any Bright Color Height: 3cm (minimum) Top Diameter: 1.27 Cm (minimum) Bottom Diameter: 2.54 Cm (minimum) Preferably With Storage Case The Materials Used Must Be Non-toxic And Dishwasher Safe 10 24 Pieces Cup, Measuring (for Solid) Type: Measuring Cup Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 11 24 Pieces Cup, Measuring, 250ml For Liquid Type: Measuring Cup Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 12 24 Pieces Cup, Measuring, 500ml For Liquid The Item Shall Have The Following Specifications: 1) Material: Clear, Non-porous Glass 2) Food Grade 3) Freezer And Microwave Safe 4) Holds 500 Ml, With 25 Or 50 Ml Increment And With Specified Metric And English System Of Measurement 5) With Handle & Spout For Easy Pouring 6) With Permanent Graduation Markings 7) Item Must Be Branded 13 2 Pieces Cutter, Dough Type: Scrapper Body Shape: Straight Blade Material: Stainless Steel Straight Blade With Stainless Steel Handle Blade Dimension: Length : 15 Cm X Width: 11 Cm X Thickness: 1.2 Mm(minimum) Handle Dimension: Length: 15 Cm X Diameter: 3 Cm (minimum) Preferably With Packing Case Food Grade And Dishwasher Safe Design Allows Item To Be Hung For Storage 14 12 Pieces Cutter, Pie The Item Shall Have The Following Specifications: 1) Blade Material: 2 Mm (minimum) Stainless Steel 316 2) Cuts 8 Even Slices, With Handle On Both Sides 3) Diameter: 26 Cm 4) Food Grade 5) The Materials Used Must Be Non-toxic. 6) The Item Must Be Branded. 15 12 Pieces Flour Sifter, Hand Cranked Type: Hand Cranked Body Shape: Round Shape Material: Stainless Steel Dimension: Diameter: 133.3 Mm (minimum) X Height: 165 Mm (minimum) Thickness: 0.79 Mm (minimum) (body) And Constructed With Stainless Steel Wire Mesh # 30 Bottom Volume Markings Should Be Seen Inside And Outside Of The Sifter Capacity: 5 Cups (1.18 Liter) Spring Action Squeeze Handle Stainless Steel Preferably With A Packing Case Dishwasher Safe 16 12 Pieces Grater Type: Four Sided Box Grater Body Shape: Box In Shape Material: Stainless Steel Blade And Plastic (polypropylene Handle) Grater Dimensions: Height- 25 Cm X Width-13 Cm X Depth-10 Cm (minimum) Side 1: Large-hole Shredder With 6 Mm Hole Side 2: Slicer Side 3: Small-hole Shredder With 3 Mm Hole Side 4: Grater With Strips About 1.27 Cm To 2.54 Cm Length Preferably With Packing Case Food Grade & Dishwashing Safe 17 12 Pieces Knife, Kitchen The Item Shall Have The Following Specifications: 1) Material: Stainless Steel Blade 2) Handle Material: Hard Plastic ( Polypropelene) 3) Overall Length: 10 Inches (minimum) 4) Blade Length: 5 Inches (minimum) 5) Handle Length: 5 Inches (minimum) 6) Thickness Of Blade: 1/8 Inches (minimum) 7) Blade Width: 1.5 Inches (minimum) 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 18 12 Pieces Knife, Pallet The Item Shall Have The Following Specifications: 1) Blade Material: Stainless Steel 316 2) Handle Material: Hardwood (smooth Finish) 3) Blade Dimension 4) Length= 7 .5 Inches (minimum) 5) Width = 1.5 Inches (minimum) 6) Thickness Of Blade: 3/16 Inches (minimum) 7) Total Length = 12 To 14 Inches 8) The Item Must Be Branded. 19 12 Pieces Ladle, 3 Oz. Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 28 Cm (minimum) Capacity: 3 Oz. (85 Ml) Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe Must Be Branded 20 12 Pieces Loaf Pan Big The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 2/32 Inch (minimum) 3) Length: 15 Inches (minimum) 4) Width: 4 1/2 Inches (minimum) 5) Depth: 4 Inches (minimum) 6) Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges 7) Food Grade 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 21 12 Pieces Loaf Pan, Medium The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 2/32 Inch (minimum) 3) Length: 12 Inches (minimum) 4) Width: 4 1/2 Inches (minimum) 5) Depth: 4 Inches (minimum) 6) Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges 7) Food Grade 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 22 12 Pieces Loaf Pan, Small The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 2/32 Inch (minimum) 3) Length: 8 Inches (minimum) 4) Width: 4 1/2 Inches (minimum) 5) Depth: 4 Inches (minimum) 6) Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges 7) Food Grade 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 23 12 Pieces Muffin Pan, Big The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 2/32 Inch (minimum) 3) Cup Diameter (top): 3 7/8 Inches 4) Length: 13.75 Inches (minimum) X Width: 10.5 Inches (minimum) X Depth: 2 Inches (minimum) 5) Number Of Cups In A Tray: 6 Cup 6) Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges 7) Food Grade 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 24 12 Pieces Muffin Pan, Medium The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 2/32 Inch (minimum) 3) Cup Diameter (top): 3 1/4 Inches 4) Length: 13.75 Inches (minimum) 5) Width: 10.5 Inches (minimum) 6) Depth: 1 1/2 Inches (minimum) 7) Number Of Cups In A Tray: 12 Cup 8) Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges 9) Food Grade 10) The Materials Used Must Be Non-toxic. 11) The Item Must Be Branded 25 12 Pieces Muffin Pan, Small The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 2/32 Inch (minimum) 3) Depth: 1.13 Inches (minimum) 4) Length: 20.63 Inches (minimum) 5) Width: 14.13 Inches (minimum) 6) Number Of Cups In A Tray: 24 Cup 7) Cup Diameter (top): 2 3/4 Inches 8) Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges 9) Food Grade 10) The Materials Used Must Be Non-toxic. 11) The Item Must Be Branded. 26 12 Pieces Pie Pan, 10 Inches Diameter The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 1/16 Inch (minimum) 3) Depth: 3 To 5 Inches 4) Set Must Each Contain The Following Volume Capacities: 6inches - 1.5 Liters (minimum) 8inches - 2.1 Liters (minimum) 10inches - 2.6 Liters (minimum) 12inches - 3.3 Liters (minimum) 14inches - 3.7 Liters (minimum) 16inches - 4.2 Liters (minimum) 5) Rolled Edge For Better Strength And Smooth Surface With No Sharp Edges 6) Food Grade 7) The Materials Used Must Be Non-toxic. 8) The Item Must Be Branded. 27 12 Pieces Pie Pan, #6, #8, #10 The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 1/16 Inch (minimum) 3) Depth: 3 To 5 Inches 4) Set Must Each Contain The Following Volume Capacities: 6inches - 1.5 Liters (minimum) 8inches - 2.1 Liters (minimum) 10inches - 2.6 Liters (minimum) 12inches - 3.3 Liters (minimum) 14inches - 3.7 Liters (minimum) 16inches - 4.2 Liters (minimum) 5) Rolled Edge For Better Strength And Smooth Surface With No Sharp Edges 6) Food Grade 7) The Materials Used Must Be Non-toxic. 8) The Item Must Be Branded 28 12 Pieces Pillars, Cake The Item Shall Have The Following Specifications: 1) Material: Crystal Clear Fiber Plastic, Food Grade 2) Tube Diameter: 2.5 Cm (minimum) 3) Base And Top Diameter: 3.5 Cm (minimum) 4) Height: 13 Cm (minimum) 5) Four ( 4 )pcs Per Set. 6) The Materials Used Must Be Non-toxic. 7) The Item Must Be Branded. 29 50 Pieces Piping Bag The Item Shall Have The Following Specifications: 1) Material: Transparent Disposable Plastic For Dispensing Ingredients To Pastries 2) Food Grade 3) Length: 9 Inches Minimum 4) Width: 3 Inches (minimum) 5) Volume: 1 Liter (approximate) 6) The Materials Used Must Be Non-toxic. 7) The Item Must Be Branded. 30 8 Pieces Rectangular Pan, 1 X 8 The Item Shall Have The Following Specifications: 1) Material: Aluminum 2) Thickness : 1/16 Inch (minimum) 3) Dimensions: # 8 : 11 Inches X 7 Inches X 2 Inches 4) Oven Safe To 500°f / 260°c 5) Food Grade 6) The Materials Used Must Be Non-toxic. 7) The Item Must Be Branded. 31 12 Pieces Rolling Pins The Item Shall Have The Following Specifications: 1) Material: Hardwood (solid Wood In Natural Color) 2) Dimensions: 2.36 Inches Diameter X 9.45 Inches Length 3) 1.57 Inches Root Diameter X 2.76 Inches (approximate Dimensions) 4) Handle Length: 3.15 Inches 5) Smooth Surface Finish With No Sharp Edges 6) Smooth Rotation Of The Revolving Barrel 7) Materials Used Must Be Food Grade 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 32 12 Pieces Rubber Scraper The Item Shall Have The Following Specifications: 1) Material: Silicone Blade (head) & Plastic Handle, (polypropylene ) 2) Color: Any Color 3) Head Length: 11.5 Cm (minimum) 4) Head Width: 7.0 Cm (minimum) 5) Handle Length : 24 To 30 Cm 6) Safe Working Temperature : -40°f To 446°f 7) The Materials Used Must Be Non-toxic. 8) The Item Must Be Branded 33 12 Pieces Sauce Pan The Item Shall Have The Following Specifications: 1) Material: Stainless Steel 2) Diameter: 16 Cm 3) Height: 8 Cm 4) With Stainless Steel Cover 5) Welded Handle (insulated) : 15 To 17 Cm 6) Thickness: 1.8 To 2 Mm 7) The Materials Used Must Be Non-toxic. 8) The Item Must Be Branded 34 12 Pieces Sheet Pan The Item Shall Have The Following Specifications: 1) Material: Aluminum 2) Thickness: 1/16 Inch (minimum) 3) Length: 17 Inches (minimum) 4) Width: 12 Inches 5) Height: 3/16 Inches (minimum) 6) Smooth Finish Surfaces Without Sharp Edges 7) Corrosion Resistant 8) Superior Heat Conduction 9) Oven Safe To 500°f / 260°c (maximum) 10) Heat Resistant 11) Food Grade 12) The Item Must Be Branded. 35 50 Pieces Spoon, Measuring Type: Measuring Spoon Body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. ( 7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) 36 12 Pieces Spoon, Wooden The Item Shall Have The Following Specifications: 1) Material: Beechwood Or Equivalent 2) Length :12 Inches (minimum) 3) Width: 2.6 Inches (minimum) 4) Depth = 1.0 Inch (minimum) 5) No Hole Or Slot Within The Spoon Bowl 6) Smooth Surface Finish With No Sharp Edges 7) Handle With Hole For Hanging Storage Purposes 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 37 12 Pieces Strainer The Item Shall Have The Following Specifications: 1) Material: Stainless Steel Frame 2) Thickness Of Frame: 1/16 Inch Diameter (minimum) 3) Handle: Stainless Steel 4) Basket Material: Stainless Steel Wire Mesh, Very Fine Mesh 5) Diameter: 8 Inches (minimum) 6) Half-rounded Mesh 7) Smooth Surfaces With No Sharp Edges 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 38 40 Pieces Tip, Decorating The Item Shall Have The Following Specifications: 1) Materials: Stainless Steel 2) Tube Height: 1 To 1.25 Inches 3) Tube Diameter: 0.7 To 1 Inch 4) Tube Tip: Assorted Designs 5) Wall Thickness: 1/32 Inch (minimum) 6) Tube Shape: Conical 7) The Materials Used Must Be Non-toxic 8) The Item Must Be Branded 39 12 Pieces Weighing Scale, 10kgs The Item Shall Have The Following Specifications: 1) Material: Aluminum Pan And Metal Body (coated) 2) Color: Any Color 3) Mechanism Type: Spring Lever 4) Capacity: 10 Kg / 22 Lb. 5) Sensitivity/graduated By 10 Gm 6) Measurement Units: Gram/kilogram 7) Manual Setting On Zero, Must Be Accurate And Durable 8) The Materials Used Must Be Non-toxic. 9) Delivery Must Include Correct Instruction Manual Written In Good English 10) Warranty Period Of 1 Year 11) The Item Must Be Branded 40 12 Pieces Weighing Scale, 5kgs, Digital The Item Shall Have The Following Specifications: 1) Materials: Engineering Plastic 2) Capacity: 5 Kg 3) Accuracy: 1 Gram 4) Four-digit Lcd Display 5) Auto Power Off 6) Size: ( L X W X H Cm ) 24 Cm X 17 Cm X 4 Cm 7) Battery Operated, Two Aaa Batteries 8) Warranty Period Of 1 Year 9) The Item Must Be Branded. 41 12 Pieces Wire Whisk, Medium The Item Shall Have The Following Specifications: 1) Material - Stainless Steel 2) Overall Length - 12 Inches (minimum) 3) Depth - 3 Inches (minimum) 4) Whip Length: 7 Inches (minimum) 5) Diameter Of Wire: 2/32 Inches (minimum) 6) Handle Length: 5 Inches (minimum) 7) Number Of Looped Wire = 6 (minimum) 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded Lot 3 Hairdressing Nc Ii 1 2 Pieces Body Brush, Prosthetic Material: Stiff Nylon Bristle Size: At Least 41.8 Cm X 6.5 Cm (over-all Size) Brush Height: 8mm(minimum) With Wooden Handle 2 2 Pieces Bowl, Mixing, Plastic Material: Plastic Inner Diameter: 10.5 Cm (minimum) Height: 6cm (minimum) Thickness Is 2mm (minimum) Any Color Non-toxic 3 4 Pieces Bowl, Shampoo Bowl Material: Abs Plastic With Adjustable Stand (height: 39 Inches To 54 Inches) Minimum Bowl Dimensions: 19 Inches(l) X 20 Inches(w) X 10 Inches(h); With Sealed Foam Rubber Neck Rest For Shampoo Bowls With Hose Attachment Of 7 Ft. Long(minimum) Stainless Steel Frame Portable Type Packed With Shipping Carton Box Branded 4 2 Pieces Box, Hairpin Material: Plastic Bristle Paddle Brush Type Wooden Handle Minimum Width: 2 Inches Non Toxic Packed With Protective Carton Box 5 2 Pieces Brush, Applicator Material: Plastic Non-toxic Size: Small=190mm Length Medium=270mm Large=300mm Handle Width:70mm (minimum) Width Of Tip: 80mm (minimum) With Hair Coloring Dyeing Board Packed With Plastic Pouch 6 2 Pieces Brush, Hair Material: Plastic Bristle Paddle Brush Type Wooden Handle Minimum Width: 2 Inches Non Toxic Packed With Protective Carton Box 7 2 Pieces Cap, Frosting, With Hook Cap Material: Silicone Type: Reusable, Perforated Cap One Size Fits All Or At Least 31cm X 22cm With Pre-cut Tipping Guides With Bleed Proof Inner Liner With A Rounded Metal Hook To Pull Hair Through The Ready Made Perforations Packed With Plastic Pouch 8 2 Pieces Cap, Heating Waterproof Cloth Material. Cordless Type To Fit An Average Size Head (21-24 Inches) Stretch Up To 29 Inches Unisex Hair Care Treatment Styling Reversible And Reusable, Non Toxic Includes With User's Guide In English That Contains: A. Diagram Of The Parts With Their Names B. Operating Procedure On How To Use The Equipment C. Safety Precaution When Using The Equipment Basic Troubleshooting And Maintenance Procedure 9 2 Pieces Cape Polyester Cloth Size: At Least 125 Cm X 140 Cm Hairstyling Type Non Toxic Packed With Plastic Pouch 10 6 Pieces Chair, High Bar Stool Material: Metal, Painted With Anti Rust Width Of The Chair:15 Inches Minimum Height :33 Inches (minimum) Synthetic Leather Seat Material Barstool Crown Back Type With Rubber Ring Of Barstool For Anti Skidding 11 12 Pieces Chair, Hydraulic Material: Metal Base Size:length59 Cm, Width54 Cm, Height From 51-78cm Hydraulic Pump Can Be Up And Down By Pedaling Load Capacity:180kg Hydraulic Styling Chair Type Heavy Duty Hydraulic Pump For Height Adjustable And 360' Rotation Hydraulic Pump Build In For Adjusting The Seating Height. With Foot Rest 12 2 Pieces Clamp Material: Plastic Overall Length: 9.5cm Thickness:10mm(minimum) Hairstyling Clamp Type 13 2 Pieces Clamp, Duck Bill Material: Metal Length: 11 Cm (minimum) High Elasticity Stainless Steel Spring. Nonslip Handle Packed With Plastic Pouch Branded 14 2 Pieces Clipper, Hair Body Material: Hard Plastic Blade Material: Carbon Steel Capacity:6 Watts (minimum) Complete With Blade Guard And 4 Comb Attachments (#1, #2, #3, #4) Motor: Magnetic Type, Corded,12v Ac/dc Adaptor Delivers 1,400 Strokes Per Minute, With Complete Accessories Including The Cleaning Brush With Cord 2 Meters Length Minimum With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures, Packed With Protective Carton Box Branded 15 2 Pieces Comb, Afro Material: Plastic Size: Overall Length At Least 7 Inches Width: 3.25 Inches(minimum) Number Of Teeth: 12 Teeth (minimum); Teeth Height: 2.5 Inches Long (minimum) 16 2 Pieces Comb, All Purpose Material: Plastic Size#3 Or At Least 18 Cm Long (minimum) Has Both Fine And Medium Teeth Position On One Side Only Height Of The Teeth: 2 Cm (minimum) Non Toxic Packed With Plastic Pouch 17 2 Pieces Comb, Haircutting Material: Hard Plastic Length Including The Handle:180mm (minimum) Width: 30mm (minimum) With Detachable Steel Blades And Blade Holder With Two Sides For Different Cuts With Extra Blades 18 2 Pieces Comb, Large Toothed Material: Plastic Size: At Least 15 Cm Number Of Teeth: 10 Teeth (minimum) Gap Between Comb's Teeth: 0.4 To 0.5 Cm Gap From One Another Teeth Size: At Least 0.3 Cm In Width X 4cm In Length Non Toxic Packed With Plastic Pouch 19 2 Pieces Comb, Tail Material: Plastic Size : 8 Inches(l)minimum X 1 Inches (w) Minimum Tail Length: 4 Inches(minimum) Tooth Length: 3/4 Inch(minimum) Packed With Plastic Pouch 20 2 Pieces Comb, Teasing Material: Plastic With 2 Rows Of Teeth 1st Row: Large Teeth With At Least 25 Mm Long 2nd Row: Small Teeth With At Least 19 Mm Long Over-all Comb Size: 20 Cm (l) Minimum X 3.8 Cm (w) Minimum Non Toxic Packed With Plastic Pouch 21 2 Pieces Comb, Wide Tooth Material: Plastic Size: At Least 15 Cm Number Of Teeth: 10 Teeth (minimum) Gap Between Comb's Teeth: 0.4 To 0.5 Cm Gap From One Another Teeth Size: At Least 0.3 Cm In Width X 4cm In Length 22 12 Pieces Crimpers Power: 25 Watts(minimum) Size: At Least 38 Cm X 15.5 Cm X 9 Cm Maximum Temperature: 200 Degrees Centigrade With Variable Heat Setting. With On/off Switch Button Rated Voltage: 110 -230volts Ac With Power Cord With Plastic Handle 23 12 Pieces Curling Iron Ceramic Curling Iron Capacity: 65watts Voltage: 210-240volts Ac With Power Cord Barrel Size: 1 Inch (minimum) Adjustable Heat Setting With Maximum Temperature Of 200 Degrees Centigrade Swivel Cord Up To 360 Degree 24 2 Pieces Drip Pan Material: Hard Plastic Size: At Least 17.5 X 25.8 X 1 Inches Thickness: 1/8 Inch (minimum) Shallow Rectangular Type Packed With Carton Box 25 12 Pieces Dryer, Hair Power: 1000w Rated Voltage: 220vac At Least (l X W X H): 18.5cm X 16cm X 6.5cm With Plastic Handle Design Packed With Carton Box With Styrofoam Holder With User's Manual In English Which Includes: A. Parts Manual With Labels B. Assembly Instructions 26 2 Boxes Gloves, Disposable Material: Plastic Size: At Least 25cm X 23cm Packaging Is 100 Pcs Per Box 27 2 Pieces Gloves, Rubber Size: Medium Thickness: 4 Mil Acid Resistant Packed With Plastic Pouch In Pairs. 28 2 Pieces Gown, Smock Material: Polyester Sizes: 1 Piece = Small Size, At Least (50 Inches X 56 Inches); 1 Piece= Medium Size, At Least (52 Inches X 58 Inches); 1 Piece= Large Size, At Least (54 Inches X 60 Inches); Packed With Plastic Pouch Per Size 29 2 Pieces Hairclips Material: Metal Size: At Least 67mm X 19mm Noncorrosive Packed With Plastic Pouch 30 2 Pieces Hairnet, Invisible Material: Nylon Size: 55mm (minimum) Stretchable And Unisex Type Color: Black Non Toxic Packed With Plastic Pouch 31 2 Pieces Headband Size: 6 Inches (minimum) Woven Crochet Tube Top Headband Very Stretchy, Soft Material, Comfortable And Breathable 32 2 Pieces Headband, Flannel Flannel Cloth Size : At Least 45 Cm (unstretched Circumference) Width: 8 Cm (minimum) 33 2 Pieces Infrared Iron Material: Ionic Ceramic Tourmaline-infused Plates And Abs Plastic Body Power: 70 Watts (minimum) Power Rating: 220-240 Volts Ac; Over-all Size: 24 Cm Long (minimum) Heating Plate Size Up To 50 Mm Heating Time: Within 30 Seconds; Variable Heat Settings: From 250 To 450 Degrees Fahrenheit With Digital Temperature Control Safety Mode: Auto Shut Off After 60 Minutes; With Swivel Cord Comes With Storage Pouch Branded 34 20 Pieces Mirror, Hand Mirror Size 15 Cm Diameter (minimum) Frame Thickness Including Mirror Glass: 6.5mm(minimum) Over-all Length With The Handle Is 20 Cm (minimum) Clear Mirror With No Distortion Frame And Handle Are Made Of Plastic Plane Mirror Type Packed With Carton Box With Styrofoam Protection 35 2 Pieces Mirror, Modular Mirror Type: Plain Mirror Mirror Material: Glass Frame Material: Aluminum (cut To Fit) Dimensions (hxw): 75 Cm X 65 Cm (minimum) Mirror Thickness: 6mm (minimum) 36 2 Pieces Prong Clip, Double Material: Steel Nickel Or Chrome Base Plated Size: 45 Mm Minimum Hairstyling Clip Type Packed With Plastic Handle 37 2 Pieces Prong Clip, Single Material: Steel, Plated Size: 55 Mm (minimum) Type: Single-prong Clip Packed With Plastic Pouch 38 2 Pieces Razor, Straight Blade Material: High Carbon Steel Type: Foldable Straight Razor, Replaceable Blade; Dimensions (lxw): 14 Cm X 2 Cm (minimum) When Folded; Compatible With Double-edged Razor Blades; Package Includes 10 Pieces Blade/box Noncorrosive Branded 39 2 Pieces Roller Pins Material: Metal Size: 60mm Long (minimum) Application: Hair Roller Pins Quantity By Dozen (12 Pieces) Noncorrosive Packed With Plastic Pouch 40 2 Pieces Rollers, Jumbo Material: Plastic Approximately 44mm In Diameter X 64mm Long 41 2 Pieces Rollers, Large Size Material: Plastic Size: At Least 40mm Diameter X 60mm Long Hairstyling Type Packed With Plastic Pouch 42 2 Pieces Rollers, Medium Size Material: Plastic; Diameter: 38 Mm(minimum) Length: 58mm (minimum) Hairstyling Type Packed With Plastic Pouch 43 2 Pieces Scissor, Cutting Material: Stainless Steel Total Length: 17cm (minimum) Blade Width At Least 10 Cm Noncorrosive Packed With Plastic Pouch Branded 44 2 Pieces Scissor, Thinning Blade Material: High Carbon Steel Blade Length At Least 6cm With Straight Blade Type Style: Right-handed Scissor Total Length At Least 17cm One Side Comb Cutter Noncorrosive Packed With Plastic Pouch Branded 45 2 Pieces Scoop Material: Plastic Capacity:1/2 Cup (minimum) Rounded Edges With Handle Thickness: 1.5 Mm (minimum) 46 4 Pieces Shower Cap Material: Plastic Size: One Size Fits All Or 30cm Reusable And Waterproof Packed With Plastic Pouch 47 2 Pieces Spatula Material: Plastic Dimension: Over-all Length Of 7.5 Cm Long, X 1.5 Cm Wide (minimum) Application: Hair Waxing Removal Packed With Plastic Pouch 48 2 Pieces Spray Gun Material: Transparent Plastic Capacity: 300ml (minimum) Trigger Type Sprayer Dimension: At Least Diameter Of Bottom Is 7 Cm And The Height Is 17cm 49 2 Pieces Steamer, Hair Power 450 Watts (minimum) Rating Is 220 Volts/50-60hz Hood Material: Polycarbonate Hood Has At Least 30 Cm Diameter Opening X 25 Cm Deep Timer Setting Is Up To 60 Minutes With At Least 32-ounce Water Reservoir Adjustable Height From 100 To 150cm With At Least 5 Swivel Casters With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, Operating Procedures, Branded 50 12 Pieces Stool Material: Metal, Electroplated Load Capacity: 150kg Design: Swivel Stool With Backrest With Hydraulic Lift To Adjust Height Freely. With Thick Sponge Cushion. With At Least Four Caster Wheels. With Thick Sponge Cushion. Swivel Stool With Backrest No Sharp Edges Branded Housekeeping Nc Ii 1 2 Pieces Alarm Clock Alarm Clock, Digital, Overall Dimensions: 13.5 X 8 X 4.5 Cm (approx.) Material: Plastic (pe/abs) Illuminated Lcd Digital Display: Time (12/24), Calendar (mm/dd), Temperature, Alarm Status (on/off), Snooze Display Size: 10 X 5 Cm (minimum), Time Can Be Read 30 Ft Daytime. Runs On Aaa Battery Which Come Together With The Item Smooth Surface, No Sharp Edges, Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting. 2 50 Pieces Apron, Polyester-cotton Bib Apron, Sleeveless Adjustable Neck Loop Material: Polyester - Cotton Fabric Dimension: 70 To 60 Cm (minimum) With 2 Or 3 Pockets Uni-color, Dark No Sharp Edges And Loose Threads 3 10 Pieces Baskets, Laundry 3 - Bag Laundry Sorter, With Wheels Bag: Polyester, Rectangular Shape, Detachable From Frame With Metal Handle And Hanging Hook Bag Dimensions: Rectangular 22 X 15 X 8 Inch (minimum) Frame Material: Corrosion Resistant Steel, Sturdy No Wobble Frame Overall Dimensions: Rectangular, 31 X 30 X15 Inch (minimum) With Four Casters, 2-inch Diameter (minimum) Smooth Surface, No Sharp Edges 4 2 Pieces Bed, Queen Bed Set, Queen Size (60 X 75 Inch) Rectangular 1) Frame: Knock-down Type, All Steel, Powder Coated Including Headboard, Bare Weight: 20 Kg (minimum) No Wobble And Noise 2) Comes With Fabric Covered Foam 6 Inches Thick Foam Density: 29 -33 Kg/cu.m. No Sharp Edges 5 2 Pieces Bed, Single Bed, Single Size (w36 X L75 Inch) Rectangular 1) Frame: Knock-down Type, All Steel, Powder Coated Including Head Board, Bare Weight: 13 Kg (minimum) No Wobble And Noise 2) Comes With Fabric Covered Foam 6 Inches Thick Foam Density: 29 -33 Kg/cu.m. No Sharp Edges 6 2 Pieces Board, Ironing Type: Foldable Type Ironing Board Body Shape: Standard Material: 25 Mm Tubing Approx., 0.8 Mm Thickness Board Size: 32 Inches (minimum) Body Size :120 Cm X 30 Cm X 5 Cm Color: Any Comes With Box No Sharp Edges 7 20 Pieces Boots, Safety, Plastic Upper Material: Elastic Pvc Sizes: 7inches - 5pcs 8inches - 5 Pcs 9inches - 5 Pcs 10inches - 5 Pcs 11inches - 5 Pcs Height: 13 To 14 Inches Plain Toe Type Of Boots: Unisex Rain Boots With Rugged Tractor Lug Outsole Packed With Carton Box Per Size 8 10 Pieces Brushes, For Housekeeping Brush, Floor Scrubbing, Angled Long Handle Bristle Material: Plastic, Stiff Handle Material: Metal Tubular Corrosion Resistant, Overall Length : 120 Cm. (minimum) Bristle Length: 5 Cm (=/- 1cm) Scrubbing Surface: 25 X 6 Cm (+/-1 Cm) No Sharp Edges 9 10 Pieces Buckets, Water Water Bucket Bucket Material: Hard Plastic, Round Body Capacity: 10 To 12 Liters Handle Material: Steel Smooth And Glossy Surface, No Sharp Edges 10 2 Pieces Caddy, Toilet Carrying Caddy For Toilet Cleaning Supplies Holds Spray Bottles And Other Cleaning Supplies, No. Of Compartments: 3 (minimum) Material: Plastic Tray Depth: 11 Cm (approx.) Overall Dimension: 36 X 26 Cm (approx.) Smooth Surface, No Sharp Edges 11 2 Pieces Carpet Sweeper Carpet Sweeper, Cordless Electric Motorized Single Brush Roll (removable) Body Material: Hard Plastic, (abs) Or Its Equivalent, Any Color Equipped With Rechargeable Battery (16 Minutes Run Time On Carpet), Removable Dirt Box Sweep Width: 8 Inches (minimum) Capacity (volume): 0.35 Lit.(minimum) Handle: Metal, Powder- Coated, With Plastic/rubber Grip, Swivel Steering Assembled Height: 44 Inches (minimum) Comes With Battery Charger 220/240vac, 50/60hz With Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) No Sharp Edges Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting. 12 2 Pieces Cart, For Housekeeping Nc Ii Housekeeping Cart Trolley Equipped With Three-shelves With Steel/laminated Panels Single Door, Top Layer With Divider, Bag Holder, And 4 Wheels Cart Frame: Steel, Powder Coated Wheels: 2non-swivel 2 Swivel, 6 Inch Diameter, Non-markings Overall Dimensions: Rectangular 90 X 48 X 1010 Cm (minimum) Comes With Accessory Linen Bag Smooth Surface, No Sharp Edges 13 20 Pieces Cleaning Cloths, Lint-free Lint Free Cleaning Cloths Material: Cotton Dimensions : Rectangular 16 X 26 Inch 14 2 Pieces Coffee Maker Coffee Maker, Electric Material: Metal, Plastic, Glass Capacity: 6 Cups (minimum) Detachable Tank, With Water Level Indicator Non-stick Warming Plate: Removable And Washable Filter Non-drip Valve: Lighted On/off Switch Power Supply: 220 V -240 V Ac 50/60 Hz, 500w Minimum Comes With A Heat-resistant Glass Pitcher With A 1-meter (minimum) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item Comes With English Manual That Contains Users Guide, List Of Parts, Maintenance Guide, Safety Guide 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. 15 10 Pieces Dustpan Dustpan, Upright Standing Material: Plastic Overall Length: 65 Cm (minimum) Pan: Round Back, 24 X 26 X 9 Cm (minimum) Smooth Surface, No Sharp Edges 16 10 Pieces Duster, Anti-static Anti-static Duster Duster Material: Polypropylene Micro Fiber Duster: Length : 30 Cm (minimum), Overall Length: 50 Cm (minimum) Handle Material: Hard Plastic, No Sharp Edges 17 4 Pieces Fan, Electric Stand Fan, Electric Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 1 Year Warranty Parts And Service 18 6 Pieces Fire Extinguisher (with Contents) 1. For Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2. Portable Type 3. Capacity: 5 - 6 Kgs 4. Rechargeable Cylinder Metal 5. Working Pressure Of Cylinder: 400 Psi 6. Brass Valve With Pressure Gage 7. With Rubberized Hose And Aluminum Nozzle Attached 8. With Squeeze Lever To Discharge And Safety Pin 9. Painted With Metal Primer And Red Enamel Paint 10. Includes With User's Guide In English That Contains: A. Operating Procedure On How To Use The Equipment B. Safety Precaution When Using The Equipment C. 11. 1 Year Warranty Parts And Service 12. The Item Must Be Branded And Have Good Quality 19 10 Pieces Flashlight 11 Flashlight Led 12 1,000 Lumens (minimum), Color: White, Battery: Rechargeable, At Least 3,500 Mah , Can Be Used Also With 3 X Aaa Batteries; Body: Aluminum Alloy, No Sharp Edges 13 Dimensions: 5 Inches X 1 Inch Diameter (minimum) 14 Operating Duration Of Battery When Fully Charged: At Least 2 Hours; Includes 220/240vac, 50/60hz Power Adapter /charger And User's Manual In English Which Includes: 15 A. A Diagram Of The Parts With Their Names, 16 B. Operating Procedures On How To Use The Equipment, 17 C. Safety Precautions When Using The Equipment, 18 Basic Troubleshooting And Maintenance Procedures Branded, With 1 Year Warranty 20 2 Pieces Flat Iron Clothes Flat Iron, Electric Material: Metal /plastic Body, Heat-resistant Plastic Handle, Aluminum Sole Overall Dimension: (l X W X H) 25 Cm X 12 Cm X 12 Cm (minimum) Power Rating : 220/240 Vac, 50/60 Hz; 1000 Watts (minimum) Equipped With Light Indicator, Variable Temperature Control, Overheat Protection, Power Cord And Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges, Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, Safety Guide. The Item Must Be Branded, With Dti-bps Certification 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. 21 20 Pieces Foam, Scrubbing A. Material: Cellulose And A Scouring Pad On One Side B. Dimension: Length: 140 - 180 Mm; Width : 80 - 100 Mm ; Thickness : 12 - 20 Mm The Item Must Be Of Good Quality 22 4 Pieces Garbage Receptacles 1. Bucket / Tub Material: Hard Plastic, (ps) Polystyrene 2. Bucket / Tub Color: Any Color 3. Capacity (gallons): 3 Gal. (minimum) Comes With A Cover The Item Must Have Good Quality 23 50 Pieces Gloves, Rubber 1. Heavy-duty Latex-free Vinyl Rubber Gloves 2. Thickness: 4 Mil 3. Color: Any Color 4. Size: Medium 5. Other Features: Acid/solvent Resistant. The Item Must Be Of Good Quality 24 30 Pieces Goggles, Safety Safety Goggles, Clear Polycarbonate - One Piece Lens With 180° Panoramic View, Non-fog Size/dimension: L 17 - 18.5 Cm X W 8 Cm X D 5-7.5 Cm High Impact Resistant, Ansi "z87" Compliant Firm And Comfortable Seal Around Forehead, Cheeks, Nose And Temples Protects Against Splash, Chemicals, Dust Adjustable Head Strap Shall Bear Mark Z87 Embossed Or Engraved Or Etched On The Item. Smooth Surface, No Sharp Edges 25 2 Pieces Hairdryer Electric Hairdryer, With Concentrator Nozzle Two Heat Setting And 1 Speed (minimum) Rating: 220/240 Vac, 1200 W (minimum) Body Length Including Nozzle: 20 Cm Folding Handle Design, With Hanging Ring Smooth Surface, No Sharp Edges Branded, Brand Name And Electric Rating Permanently Mark On The Item, With Dti-bps Certification With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. With Service Centers Located In Major Cities In The Philippines. 1 Year Warranty(parts & Service) 26 4 Pieces Hose, Water Water Hose Material: Pvc Fiber Reinforced, Three (3) Layers; Any Color. Hose Length: 50 Feet. Hose Diameter: 5/8 Inches; Pressure Capacity: 200 Pounds Per Square Inch (minimum); Fitted With Male And Female Brass Couplers (nh, 11.5 Tpi) For Spray Nozzle No Sharp Edges 27 2 Pieces Kettle, Electric Electric Kettle Cordless (with Pouring Spout), Hinged Lid, Detachable From And Can Rotate On Its Corded Base Material: Round Stainless Body, Plastic Handle, Lid And Base Capacity: 1.5 To 2 Liter Automatic Shut - Off, With Power Indicator Light Power Rating: 220//240vac, 50/60hz, 1000 -1600 Watts Base With A 50 Cm (minimum) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges; Dti-bps Certified Comes With English Manual That Contains Operation Procedure, Maintenance And Safety Guide. The Item Must Be Branded, Brand Name And Electrical Ratings Permanently Mark On The Item. 28 10 Pieces Laundry Sorter 19 3 - Bag Laundry Sorter, With Wheels 20 Bag: Polyester, Rectangular Shape, Detachable From Frame With Metal Handle And Hanging Hook 21 Bag Dimensions: Rectangular 22 X 15 X 8 Inch (minimum) Frame Material: Corrosion Resistant Steel, Sturdy No Wobble 22 Frame Overall Dimensions: Rectangular, 31 X 30 X15 Inch (minimum) With Four Casters, 2 Inch Diameter (minimum) 23 Smooth Surface, No Sharp Edges 29 4 Pieces Light, Emergency Emergency Light, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector Power Rating: 220 -240 Vac , 50/60 Hz 20-24 Hours Charge Time Dimensions: Rectangular 27 X 7 X 27 Cm (approx.) Sooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures The Item Must Be Branded, Brand Name And Electrical Ratings Permanently Mark On The Item 30 2 Pieces Mirror Wall Mirror With Frame Flat Glass Mirror, 2 Mm Thick (minimum), Clear With No Distortion Frame: Wood Or Plastic Commercial Finish Rectangular Shape, 3600 Sq.cm (minimum) Includes Mounting Accessories Smooth Surface, No Sharp Edges 31 9 10 Pieces Mop Mop, Handle And Mop Head Set, Refillable Head Handle: Aluminum Or Anti-rust Coated Steel, With Hard/stiff Plastic Mop Head Holder, Clip Type With Tightening Knob Overall Handle Dimension: 130 X 19 Cm (minimum) Mop Head: Cotton Thread/yarn, Sewn Tailband, L 34 X 16 X 4 Cm (minimum), White Handle: Plated Steel Tube Or Wood, Length: 40 (minimum), No Sharp Edges 32 2 Pieces Polisher, Floor, Electric, With Accessories Electric Floor Polisher With Accessories Material: Stainless Steel, Aluminum Alloy Handle: Stainless Tube, Adjustable Height 1 Meter Long (approximate), With Dual Switch Lever Size/capacity :13 Inch (minimum) Diameter Power Supply: 220/240 Vac, 50/60 Hz. Power: 1/3 Hp (minimum) Rotation Speed : 160 Rpm (minimum) Heavy Duty (royal) Power Cord Length : 12 Meters (minimum) With Type A Plug (or Providing 10a Plug Adapter Is An Option) With Pair Of Rubber Wheels, Smooth Surface, No Sharp Edges Comes With Pad Holder, 2 Pcs - Polishing Brush And 3 Pcs - Floor Polishing Pads Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures Branded, Brand Name And Electric Rating Permanently Mark On The Item, With 1 Year Warranty Parts And Service The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market. 33 2 Pieces Shelving Shelving, Open, Knockdown Type, Adjustable Shelves Metal Powder Coated Frame Number Of Shelves : 5 Overall Dimensions : 85 X 30 X 180 Cm(minimum) Sturdy Connection, No Wobble Smooth Surface, No Sharp Edges 34 24 Pieces Sign, Caution Caution Sign, A Shape-2 Panel Self-standing, With D-handle, Collapsible For Easy Storage Material: High Impact Plastic, Panel Dimension : Rectangular (lxw) 55-65 Cm X 25 X 61 0m (minimum), Panel Depth : 2 Cm (minimum) Color: Yellow Print Description: "caution: Wet Floor" On One Side "cleaning In Progress On The Other Side, Both Messages Provided With Graphics Printed In Black. Font Size: 100 -120 Mm X 50 -70 Mm, Arial Smooth Surface, No Sharp Edges 35 25 20 Pieces Sponges, Dish 26 Dish Sponge, Cellulose, Non-scratch Dimensions: 5 X 3 X 1 Inch (minimum) 27 Branded 36 28 10 Pieces Spray Gun, Water Barber/salon Spray Gun Material: Hdpe Transparent Plastic Capacity: 300 Ml.(minimum) Trigger Type Sprayer Dimension: Diameter :7 Cm. X Height: 16.3 Cm (minimum) Rotating Nozzle To Adjust Spray Patterns Smooth Surface, No Sharp Edges Must Be Branded 37 4 Pieces Squeegee Squeegee, Short Handle Head/blade Material: Stainless, Rubber Handle: Plastic Or Stainless Steel Blade Length: 25 - 30 Cm Overall Length (handle And Head) 20 - 32 Cm No Sharp Edges 38 4 Pieces Squeezer, Mop Mop Bucket With Squeezer/wringer And Wheels Hand Lever To Squeeze, Made Of Metal, With Hand Grip Material : Hard Plastic, (ps) Polystyrene Or Its Equivalent Capacity : 30 L (minimum) Overall Dimension (excluding Handle: ( L X W X H ) 40 X 27 X 57 Cm (minimum) Color: Yellow With 3 Inches Non-marking Rubber Casters "caution" Printed In Black On Both Sides Of The Mop Bucket Smooth Surface, No Sharp Edges 39 2 Pieces Step Ladder Material: Aluminum U Channel Capacity: 250 Lbs (minimum) Type: Flatform Type Number Of Step: 6 (including Top Step) Reach Height: 6 To 8 Feet(minimum) Width: 15 Inches Minimum Spread: 4 Feet (minimum) Twin Steps With Gripped Treads To Prevent Slipping Step Braces On Top And Bottom Step Heavy Duty Aluminum Foot Bracket With Slip-resistant Foot Pad With User's Manual In English Which Includes: A. Parts Manual With Labels, Assembly Instructions, Branded 40 2 Pieces Vacuum Cleaner, Dry And Wet Electric Vacuum Cleaner, Wet And Dry Function, Sucks Even Screws, With 4 Swivel Caster Wheels Material: Hard Plastic, (abs) Or Rust Proof Body Equivalent Power Supply : 220/240vac, 50/60hz, 1000 Watts (minimum) Auto Shut Off Tank Capacity: 20 Liters (minimum) Equipped With Complete Accessories I.e., Detachable Vacuum Hose Assembly (flexible Non-kink), Extension Tubes/wands, Carpet (long Square) Brush Nozzle, Wet And Dry Floor Brush Nozzle, Crevice Nozzle, Hepa Filter, Sponge Filter/washable Cloth Bag. Comes With 4 Meters (minimum) Heavy Duty (royal) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. The Item Must Be Branded, Brand Name And Electric Rating Permanently Mark On The Item. 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market. 41 2 Pieces Washer, Dryer Laundry A. Front Load Electric Washer, Laundry B. Electronic Control, Digital Indicator Display, Transparent Glass Door C. Body Material: Steel, Powder Coated, Any Color D. Dimensions (wxdxh): 590 Mm (minimum) X 490 Mm (minimum) X 820 Mm (minimum) E. Drum Material: Stainless Steel F. Capacity: 8 Kg (minimum) G. Spin Speed: 1200 Rpm (minimum) H. Power Rating: 220 /240vac, 50/60 Hz. I. Comes With A 1 Meter (minimum) Heavy Duty Power Cord With Male Plug To Adapt Type A Outlet (or Providing 20a Plug Adapter Is An Option) J. Smooth Surface, No Sharp Edges K. With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 9. Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures L. The Item Must Be Branded, Dti-bps Certified, 1 Year Warranty Parts And Service M. With Service Centers Located In Major Cities In The Philippines. The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market. 42 4 Pieces White Board White Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform. Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) With Plastic Corner Caps Comes With Metal Tray For Marker And Eraser The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels Overall Height From Floor: 210 To 214cm Smooth Surface, No Sharp Edges Front Office Services Nc Ii 1 5 Pieces Calculator Type: Simple Calculator, Nonscientific Body Material: Hard Plastic Minimum Size: 110mm Width X 140mm Long Lcd Display: At Least Font Size Is 8mm X 5mm With Dual Power; Solar Cell And Battery With At Least 8 Digits Display Includes Spare Battery Packed With Protective Carton Box User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions C.operating Procedures On How To Use The Equipment 2 2 Pieces Cart, Bell Boy Type: Hotel Luggage Trolley Capacity: At Least 450 Kilograms Minimum Dimensions: Length - 1000mm X Width - 600mm X Height - 1700mm Frame Material: Stainless Steel Tubing Stainless Tube Diameter: At Least 35mm Black Powder Coated Steel Platform With Carpeted Surface And Rubber Bumper At The Edge With 4 Pieces X 200mm Diameter Black Pneumatic Swivel Wheels Packed With Shipping Carton Box Branded 3 1 Piece Cash Register With Drawer Printer: Width: 57mm (minimum) Speed: 2 Lines/sec (minimum) Lcd Display Size: 5cm Width X 10cm Long(minimum) With Drawer At Least 4 Bills And 5 Coins Compartments With Drawer Dimension At Least 410mm Width X 450mm Depth Input Method: Numeric 10-key Interface With At Least 2 Ports Power Source: 220-240volts Ac, 50/60hz; With Ac/dc Adapter Can Be Operated With Battery Programmable User's Manual In English Which Includes: A. Parts Manual With Labels 4 1 Piece Credit Card Imprinter Height Of The Imprinter 2 1/2 Inch (minimum) X Width 5 1/2 Inch (minimum) X Length 11 Inches (minimum) Carriage Material: Steel Body: Plastic Color: Black 20 Characters Per Line Card Mounting Can Accepts At Least 0.030" Thick Size Credit Cards Plate Can Accommodate Up To 5 Lines, Manual Type With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C.operating Procedures 5 1 Piece Credit Card Voucher Holder Material: 3 Mm Thick Clear, Acrylic, Dimensions: Height: At Least 255 Mm, Width: At Least 210 Mm, Thickness: At Least 70 Mm 6 1 Piece Detector, Fake Bills Led Display; Led Display Size: At Least 5 Cm Width X 10 Cm Long; Hard Plastic Casing; Ultraviolet (uv) And Magnetic (mg) Sensors; Power Source: Built In Rechargeable Battery,12v Output And Ac 100- 240v Adapter; With Complete Detection; Accessories Includes: Tough Plastic Carrying Case, Power Cord, Cleaning Brush, And Power Charger; User's Manual In English Which Includes: A. Parts Manual With Labels, B.assembly Instructions 7 1 Piece Guest Folio Rack Material: Hard Plastic; Accommodates At Least 50 Room Divider Indexes; With Divider Boards With Metal Tabs; A4 Size Divider; With Metal Sidings 8 1 Piece Hypercom Memory: 1 Mb Ram (minimum) Lcd Display; 160 X 80 Pixel Graphics (minimum) With Card Reader Magnetic Stripe Pin Pad Port: 4-wire, Rs485; With Peripheral Ports For Pc Connection; Electronic Cash Register Or Journal Printer; With At Least 2400bps Modem; Support Synchronous (sdlc) And Asynchronous, Lan Operation; With Pin Encryption; With Thermal Printer At Least 576 Dots Per Line; Thermal Paper – 2 Inches Wide X 3 Inches Roll Diameter (min.); Keypad: Membrane, 12 Keys, Water-resistant 9 1 Piece Key Card Marker With Verifier Set Of Hotel Door Lock System With Management Software; A) 1 Unit - Card Type Door Lock With Inductive Distance At Least 4cm B) 1 Unit - Card Encoder Unit With 25 Pieces Door Room Key Cards Computer Software System For Door Lock And Making Cards With Complete Accessories Including The Usb Type A Cable Interface To The Computer User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions C. Operating Procedures On How To Use The Equipment 10 1 Piece Key Rack Rack Material: Wood Number Of Racks: Can Accommodate At Least 40 Key Cards Minimum Rack Size: 70mm Width X 110mm Height Depth Of The Rack At Least 50mm Any Color Paint Type: Wall Mounted Rack Pack With Shipping Carton Box 11 1 Piece Safety Deposit Box/drop Vault Material: Metal, Powder Coated, Solid Steel Door Thickness: 4mm(minimum) Body Thickness: 2mm(minimum) Minimum Outer Dimension: L: 30cm X H: 20cm X W: 20cm Electronic Lock System Battery Operated Digital Panel: Requires 4 X ‘aa’ Batteries User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, Operating Procedures On How To Use The Equipment, Branded 12 4 Pieces Speaker, Lapel Frequency At Least 500mhz With Audio Input Connector With Operation Range At Least 50meters Receiver/70ma Earphone Output Level: 32ohm, 65mw Operates With Energizer Battery With Minimum Power Consumption Of Transmitter At Least 3v/70ma Receiver: 3v/70ma Wellness Massage Nc Ii 1 1 Piece Dummy, Anatomical 1. Half Life-size Muscular Figure Measures 32" Tall (minimum). 2. This Model Features 27 Removable Parts That Are Held On By Metal Screws, Posts, And Hooks. 3. It Shows The Muscular System With Numbered Parts That Comes With A Corresponding Key. 4. It Has Removable Arms, A Removable Calvarium, And A Removable Chest Plate That Hides The Individual Numbered Organs Of The Digestive System 5. Detachable Muscles Include: Deltoid, Brachioradialis With Extensor Carpi Radialis Longus And Brevis, Biceps Brachii, Pronator Teres With Palmaris Longus And Flexor Carpi Radialis, Sartorius Muscle, Rectus Femoris, Extensor Digitorum Longus, Tensor Fasciae Latae, Gluteus Maximus, Biceps Femoris, Semitendinosus, Gastrocnemius, Soleus. 6. Removable Organs Include: Brain (2parts), Lungs (2 Parts), Heart (2 Parts, Liver, Intestines, Stomach 7. Base Is 13" X 9" (removable) 8. Weighs 12 Lbs. (approximately) 9. Plastic Material 10. Non-toxic Material 11. Carton Box Packaging 2 5 Pieces Massage Bed/table Materials: Hard Wood With Steel Bracings, Hardwood Frame, Marine Plywood Deck; Color: Black Dimensions: W:75 Cm X L:183 Cm X H: (adjustable) Height: Adjustable From 24 In. - 33in. Leg Thickness - 35mm (minimum) Cushion System: High Density Foam (7.5 Cm / 2.95") Minimum With Pu Leather Cover (1mm Thick) Finishing: Round Corner Weight Capacity: 250 Kg(minimum) Gross Weight: 21 Kg (approximate) 2 End Support Bearer To Strengthen The Base And Increase Weight Capacity Accessories - Aluminum Headrest (adjustable) + Face Plug + Armrest + Arm Sling + Carry Case Portable And Foldable 3 1 Piece Massage Chair 1. Padded With 3" Thick, High-density, Small-cell Foam 2. Size: 14"-diameter Seat (minimum) But Without Back And Arm Rest, With Metal Post And Hard Plastic Star. 3. Pneumatic Spring Will Effortlessly Adjust The Height From 18" To 24" With The Pull Of A Lever 4. Five Heavy-duty, Smooth-rolling Wheels 5. Load Capacity: 265 Lbs / 120 Kg (maximum) 6. Smooth Surface And No Sharp Edges Any Color With One Color Only For Whole Lot 4 5 Pieces Sphygmomanometer Aneroid Type; (for Adult Use) Large Cuff Sizes: 33 To 42 Cm Arm Diameters Accuracy: ±3mm Hg; Measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg Index And Range Markings On The Dial For Clear Readings Nylon Cuff Is Durable And Stain Resistant With A Velcro Closure Inflation System Is Latex Free And Has An Easy-release Deflation Valve Chrome-plated Brass Air Release Valve; Set Includes: 1 Unit Sphygmomanometer; 1 Zippered Nylon Carrying Case Smooth Surface And Edges, Nontoxic Material 5 5 Pieces Stethoscope Chest-piece Description: Stainless Steel Double Chest Piece Color: Black Tubing Description: Y-tube Pvc Uses Extra Soft Replaceable And Pivotable Ear Tips The Binaural Is Chromium-plated Chest-piece Diameter: 44 Mm (minimum) And Has Non-chill Rim Overall Length: 29" /74 Cm (minimum) The Stethoscope Is Latex-free Comes With A Pair Of Replacement Ear Tips, A Replacement Membrane, And A Name Plate Smooth Surface And No Sharp Edges 6 1 Piece Talking Sphygmomanometer Type: Arm Type Blood Pressure Monitor (talking English), Nylon Cuff Sizes: 33 To 42 Cm Arm Dia. Lcd Digital Display: Systolic, Diastolic, Pulse Rate With Real Voice, Loud And Clear, Announcing Blood Pressure Automatically When Reading Is Detected And Displayed Simultaneously Dimensions: 98mm*126mm*60mm (approximate) Hard Plastic Casing, Smooth Surface And No Sharp Edges, Nontoxic Materials Measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg Weight: 450g (approximate) Pressure Measurement Range: 20~280mmhg(0.4kpa-37.3kpa) Pressure Accuracy: ±3mmhg(±0.4kpa) Pulse Measurement Range: 40 ~199 Beats /min Voltage: 4*aaa Alkaline Batteries Or Power Adapter Certificate: Ce Rohs Intelligent Automatic Pressurization And Decompression Incorrect Prompting Function Automatic Shutdown: 1 Min After Last Operation Carton Box Packaging 7 1 Piece Talking Thermometer Case Material: Hard Plastic Sensing Unit: Thermistor Measurement Method: Actual Measurement Measurement Range: 32 C - 42 C (89.6f-107.6f) Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f) Power Supply: 1.5v Dc, Lr41 Alkaline-magnesium Button Battery Real Voice (loud And Clear In English) Announces Temperature Automatically When Reading Is Detected Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment Dimension Approx.: 2.0 (w) X 4.4 (h) X 1.2 (d) Inches (not Including Probe) / 51 (w) X 110 (h) X 30 (d) Mms (not Including Probe) Choices In Degrees Celsius Or Fahrenheit Talk Button Repeats Last Temperature Reading Last Reading Memory Auto Switch Off Accessories: Protective Case, 5 Probe Covers, Instruction Sheet Paddle Shape With Sensor On Small End 8 5 Pieces Thermometer, Digital Case Material: Hard Plastic Sensing Unit: Thermistor Measurement Method: Actual Measurement Measurement Range: 32 C - 42 C (89.6f-107.6f) Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f) Power Supply: 1.5v Dc, 1 Lr41 Alkaline-magnesium Button Battery When Measured At A Standard Room Temperature Of 23 Deg C (73.4 Deg F) In A Test Tank Held At Constant Temperature Power Consumption: 0.1mw Low Battery Indication: Battery Symbol Displayed Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment Memory: Last Measuring Reading Beeper Function: 1 Beep When Power On 3 Beeps After Measurement Completed External Size (mm): 19.4(w) × 132.5 (l) × 10.0(d) Accessories: Protective Case, Test Battery, 5 Probe Covers, Instruction Sheet Paddle Shape With Sensor On Small End 9 1 Piece White Board White Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform. Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) With Plastic Corner Caps Comes With Metal Tray For Marker And Eraser The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels Overall Height From Floor: 210 To 214cm Smooth Surface, No Sharp Edges 1. The Delivery For This Project Shall Be Door-to-door From Sdo Direct To The Recipient Schools. 2. The Supplier Shall Inform The Recipient Schools Three (3) Calendar Days Before The Actual Delivery Date To Ensure The Presence Of The School Inspection And Acceptance Team. 3. The Goods That Will Be Delivered To The Recipient Schools Shall Be Compliant With The Requirements Of The Contract And Have Passed The Inspection And Test. Please Bring Sample Of The Items That Can Be Carried By Hand.

Details: Description 1. The Department Of Education – Division Of Tangub City, Through The General Appropriations Act 2024 Intends To Apply The Sum Of Three Million Nine Hundred Seventy-eight Thousand One Hundred Six Pesos (php 3,978,106.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Procurement Of Learning Tools And Equipment For Technical Vocational Livelihood To Deped-public Schools With Identification Number Tvl - 2024 – Rx – Tangub City – 030. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Quantity Unit Item Description Abc Lot 1. Lorenzo Tan National High School (caregiving Nc Ii)- Php 400,403.00 5 Piece Airpot 1.type: Water Heater 2. Outer Material: Hard Plastic, (pp) Polypropylene, Heat Resistant 3.cavity Material: Stainless Steel 4. Capacity: 2.5 Liters 5.voltage: 220/240/volts 6.ac 50/60 Hz. Power In Watts: 500 To 800 Watts 7.comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, Safety Guide 8. The Item Must Be Branded And Good Quality. 10 Piece Apron 1.type: Bib Apron 2. Material: Polyester-cotton Fabric 3.length: 20 To 40 Inches (minimum) 4. With 2 To 3 Bottom Pockets; 5.color: Any 6.the Item Must Be Of Good Quality 2 Piece Bath Tub, Baby 1. Material: Hard/sturdy Plastic, (pp) Polypropylene 2. Color: Any 3.dimension: (l X W X H) 670 To 700 Mm X 400 To 420 Mm X 160 To 190 Mm (minimum) 4. Thickness: 3 Mm To 6 Mm (minimum) 5.color: The Item Must Be Of Good Quality 10 Piece Baby Blanket 1. Type: Blanket 2. Material: 100% Cotton 3.color: White 4. Dimension: (l Xw) 38 To 42 Inches X 28 To 32 Inches (minimum) 5. Washable 6. The Item Must Be Of Good Quality 20 Piece Basin (small) 1.material: Hard Plastic, (pp) Polypropylene 2. Color: Any 3.dimension: 280 - 320 Mm Diameter X 80 - 120 Mm Higher (mimimum) 4. Thickness: 2 Mm To 4 Mm (minimum) 5. The Item Must Be Of Good Quality 20 Piece Bath-towel, Towellete 1. Type: Bath Towel 2. Material: 100% Cotton 3.color: White 4. Dimension: ( L X W ) 120 - 125 Cm X 60 - 65 Cm (minimum) 5.washable 6.the Item Must Be Of Good Quality 5 Piece Bedpan 1.material: Hard Plastic, (ps) Polystyrene 2. Color: Any Color 3.dimension: ( L X W X H) 22 - 26 Cm X 27 - 32 Cm X 7 - 12 Cm (minimum) Approximate 4. Capacity: 1 Liter (minimum) 5.thickness: 2 To 5 Mm 6.saddle-shaped And Lightweight 7. The Item Must Be Of Good Quality 10 Piece Blanket 1. Type: Blanket 2. Material: Cotton 3.color: White 4. Dimension: (l X W) 80 - 90 Inches X 54 -64 Inches Approximate 5. Washable 6. The Item Must Be Of Good Quality 3 Piece Bottle Sterilizer, Electric 1. Type: Electric Steam Sterilizer 2. Material: Hard Plastic (p E) Polyethylene Or Its Equavalent 3.color: Any Color 4. Capacity: 6 Bottles (minimum) 5.sterilizes Bottle And Accessories By Steam 6. With Automatic Power Shut-off Function 7. Dimensions: 8. Power Supply: 220 V-240v Ac, 50/60 Hz. 9. The Item Must Be Of Good Quality 5 Piece Bread Toaster 1. Type: Electric Bread Toaster 2. Dimensions ( W X D X H): 25 - 30 Cm X 15 -20 Cm X 18 - 22 Cm (minimum) Approximate 3. Capacity: 2 Slices 4. Power Supply: 220v-240v Ac, 50/60 Hz. 5. 400 To 600 W (minimum) 6. The Item Must Be Of Good Quality 10 Piece Burping Cloth 1. Type: Burping Cloth 2. Material: 100% Cotton 3. Color: Any Color 4. Dimension: Length: 17 -19 Cm Width: 14 -16 Cm (minimum) 5.washable 6. The Item Must Be Of Good Quality 10 Piece Cane 1.type: Adjustable Offset-walking Cane 2. Material: Aluminum 3.tip Size: 18 4. Height Adjustment: 31 Inches To 39 Inches (with 1 Inch. Increment) 5.weight Capacity: 200 - 250 Lbs. (minimum) 6.with Rubber Handle; With Push-botton Height Adjustment 7. The Item Must Be Of Good Quality 5 Piece Carpet 4ft. X 8 Ft 1.material: Polyster 2. Color: Any Patterned Color 3.dimension:48 Inches X 96 Inches (minimum) 4.the Item Must Be Of Good Quality 5 Set China Ware 1.material: Porcelain 2. Fit To Be Used In Ovens And Microwaves 3.specific Dimensions: Dinner Plate Diameter: 10 Inches (minimum) 4. Salad Plate Diameter: 7 Inches (minimum) 5.bowl Diameter: 5 Inches (minimum) 6.mug: 12 Oz. (minimum) 7. The Item Must Be Of Good Quality 8. Set Includes: 1 Piece Dinner Plate, 1 Set Salad Plate, 1 Piece Bowl, 1 Piece Mug 10 Piece Clothes Brush 1. Type: Rectangular Clothes Brush 2. Handle Material: Wood 3. Bristle Material: Plastic Bristle 4. Color: Any Color 5.overall Dimension: ( L X W X H) 140 -160 Mm X 45- 60 Mm X 20 -30 Mm (minimum) 6. The Item Must Be Of Good Quality 10 Piece Clothes Hamper 1. Type: Square Hamper 2. Material: Polyester 3. Color: Any Color 5. Dimension: ( L X W X H) 32 To 34 Cm X 36 To 38 Cm X 56 To 58 Cm (minimum) 5. The Item Must Be Of Good Quality 2 Piece Clothes Rack 1.type: Single-pole Clothes Rack 2. Material: Stainless Steel 3. Dimension: ( L X W X H) 30 To 32 Inches X 14 To 38 Inches X 62 To 64 Inches (minimum) 4. Comes With 4 Caster Wheels 5. The Item Must Be Of Good Quality 3 Piece Comforter 1.type:comforter 2. Material: Polyester 3.color: Any Color 4. Dimension: ( L X W) 84 To 88 Inches X 62 To 65 Inches (minimum) 5.thickness: 20-30 Mm (minimum) 6.washable 7. The Item Must Be Of Good Quality 3 Piece Commode 1.type: Foldable Commode 2. Durable Plastic Snap- On Seat And Lid Withouot Pushing Buttons 3. Blue Powder-coated Steel-welded Construction 4. Plastic Arms For Added Comfort 5.comes Complete With 12 Qt. Commode Bucket With Carry Handle, Cover And Splash Shield 6. Specifications: Width 18 Inches Between Arms/ 22.5 Inches Outside Approximate 7. Set Dimensions: W 32 -36 Cm X D 35 -40 Cm, Height 38 -54 Cm Approximate 8. Weight 13 Lbs., Weitgh Limit 350 Lbs. 9. The Item Must Be Of Good Quality 5 Set Cooking Utensils 1. Material: Stainless Steel 2. The Set Is Comprised Of Ff:; 1 Pc. -16 X 9.5 Cm Sauce Pan With Glass Lid (minimum) 3. 1 Pc. - 16 X 95 Cm Casserole With One Glass Lid, (minimum) 4. 1 Pc. - 18 X 10.5 Cm Casserole With Glass Lid, (minimum) 5.1 Pc. - 20 X 11. 5 Cm Casserole With Glass Lid, (minimum) 6. The Item Must Be Of Good Quality 2 Piece Crutches, Adjustable 1.type: Adjustable Crutches 2. Set Includes: 3 Pcs./set 3.material: Aluminum Powder-coated 4. Color: Any Color 5.weight Capacity: 300 Lbs. (minimum) 6. Dimensions: Youth Size 7. User Heights: 4 Ft. 6 Inches To 5 Ft. 2 Inches 8. Underarm Height: 37 Inches To 46 Inches 9. Adult Size: User Heights: 5 Ft. 2 Inches To Ft. 10 Inches 10. Underam Heights: 45 Inches To 53 Inches 11. Tall Adult Size: User Heights: 5 To 10 Inches 12. Underam Height: 53 Inches To 61 Inches 13. The Item Must Be Of Good Quality 10 Piece Cutlery 1.material: Stainless Steel 2. 20 Pieces Set For 4 3. 4 Dinner Knives 4. 4 Dinner Forks 5. 4 Dinner Spoons 6. 4 Salad Forks 7. 4 Tea Spoons 8. The Item Must Be Of Good Quality 10 Piece Cutting Board, Plastic 1. Material: Polyethylene Plastic 2. Color: Any Color 3. Dimension: ( L X W X H) 240 - 260 Mm X 140 - 160 Mm X 10 - 15 Mm (minimum) 4. Reversible Cutting Surface 5. The Item Must Be Of Good Quality 10 Piece Digital Thermometer, 32 C-42.9 C (90.0f-109.9f 1. Case Material: Hard Plastic (pe) Polyethylene 2. Color: Any Color 3. Range: 32 C - 42.9 C (90.0f-109.9f) 4. Accuracy: + 0.1c 35.5c-42.0c(+ 0.2 F 95.9f-107.6f) 5. Battery Operated 6.memory: Last Measuring Reading 7.alarm: Approx. 10 Seconds Sound Signal When Peak Temperature Reached. 8. The Item Must Be Of Good Quality 2 Piece Dressing Trolley 1.material: Shelves: Powder-coated Steel Sheet 2. Dimensions: ( W X D X H) 48 - 50 Cm X 48 - 50 Cm X 83 - 85 Cm (minimum) 3.number Of Shelves: 2 4. With Four Revolving Castors, Two Lockable 5. The Item Must Be Of Good Quality 10 Piece Electric Knife 1. Type: Electric Knife 2. Material: Stainless Steel And Hard Plastic, (pe) Polyethylene 3. Power Supply: 220/240 Volts, Ac 50/60 Hz. 4. Dimensions: 4.25 X 2.75 X 11.88 Inches (minimum) 5.comes With Touch Button Control, Safety Lock And English User & 39;s Manual 6. Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, 7. The Item Must Be Of Good Quality 10 Piece Face Towel/towellete 1. Type: Face Towel 2. Material: 100% Cotton 3. Color: White 4. Dimension: ( L X W ) 28- 32 Cm X 28 -32 Cm (minimum) 5. Washable 6. The Item Must Be Of Good Quality 10 Piece Feeding Bottle Brush 1. Bristle Material: Nylon 2. Color: Any Color 3. Handle Material: Hard Plastic, (ps) Polystyrene 4. Total Length: 280 -320 Mm (minimum) 5. Fit With The Standard Feeding Bottle For The Baby 6.comes With Nipple Brush 7. Washable 8. The Item Must Be Of Good Quality 5 Set Feeding Utensils (child) 1.material: Hard Plastic, (ps) Polystyrene 2. Sets Includes: 6 Pcs./set 3. 1 Pc Knife 4. 1 Pc- Plate 5. 1 Pc. -bowl 6. 1 Pc. - Cup 7. 1 Pc. -fork 8.1 Pc. - Spoon 9. Color: Any 10. The Item Must Be Of Good Quality 7 Set First Aid Kit Type: Emergency Case; Contents: First Aid Quick Reference Guide, 1 Pc; Sterize Gauge Swab (4x 4 X 12 Ply) 100 Pcs/pack, 1 Pack; Adhesive Strips/band-aid, 50 Pcs/pack, 2 Packs; Gloves, Disposable, Medium Size, 2 Pairs; Hypo Allergenic Adhesive Tape, 5 Cm X 5 Cm, 2 Rolls; Triangular Bandage/arm Sling, Min 90 Cm X 90 Cm X 120 Cm, 2 Pcs; Safety Pins, 1 1/4 Inches, (12 Pcs), 1 3/4 Inches (12 Pcs); Stainless Steel Bandage Scissors, 2 Pcs; Betadine, 60ml, 2 -3 Years Expiration, 2 Bottles; Dust Mask, 2 Pcs; Hand Towels Or Face Towels, White Color, 6 Pcs; Gauze Bandage, Minimum 5 Cm X 4cm, 2 Rolls; Antiseptic Handwash/germicidal Soap, 60 Gms, 2 Pcs; Torniquet, 2 Pcs; Spirit Of Ammonia, 30ml, 2-3 Years Expiration, 1 Bottle; Burn Cream Ointment, 20g To 30g, 2-3 Years Expiration, 1 Tube; Medical Tweezers Min. 8 Cm, Plastic, 2 Pcs; Plastic Bags, Resealable, Minimum Of 24 Pcs, 100mm X 180mm, 24 Pcs, 150mm X 230mm; Cotton Balls, 50 Balls In A Sealed Package, 2 Packs; Hot And Cold Pack, Reusable, 1 Pack; Water Resistant And Sturdy Case W/ Handle That Can Accomodate All The Listed Items. 20 Piece Flat Sheet 1.type:bed Sheet 2. Material: 100% Cotton 3. Color: White 4. Dimension: Width - 137 - 145 Cm Length - 180 -200 Cm (minimum) 5. Washable 6. The Item Must Be Of Good Quality 10 Piece Garbage Bin Type: Swivel Lid Garbage Bin Body Shape: Round Material: Hard Plastic, Polypropylene Dimension: 4 Gallons ( Minimum) Removable Dome Shape Lid With Spring Return Swivel Preferably With Packing Case Color: Any Color Smooth And No Rough Surfaces 20 Box Gloves, Rubber (15 Mils) Medium Size (#8) Super Nitrile, Flocklined Interior (acid/solvent Resistant) Individually Packed For Hand Protection 10 Box Gloves, Surgical (disposable) 1.material: Latex 2. Color: White 3. Thickness: .09 Mm (minimum) 4. Disposable And Sterile 5. The Item Must Be Of Good Quality 20 Piece Gown (hospital) 1.type:unisex Hospital Gown 2. Material: Polyester- Cotton 3. Color: Any Color 4. Size: One Size Fits All 5. Comes With Overlap Back Closure 6. The Item Must Be Of Good Quality 5 Set Grooming Kit (hairbrush Comb, Nail Cutter, Nail Brush) 1. Set Includes: 6 Pcs./ Set (minimum) 2. Materials: Stainless Steel And Hard Plastic 3. 2 Nail Clippers/ Trimmers Of Different Sizes 4.1 Multipurpose Scissors 5. 1 Ear Pick 6. 1 Tweezer 7. 1 Comb 8. The Item Must Be Of Good Quality 10 Piece Hand Towel 1. Type: Hand Towel 2. Material: 100% Cotton 3. Color: Any Color 4. Dimension: ( L X W) 65 -75 Cm X 32 -42 Cm (minimum) 5. Washable 6. The Item Must Be Of Good Quality 3 Piece High Chair/booster Seat/ Portable Seat 1. Material: Foldable Powder Coated Steel Frame Or Its Equavalent 2. Phone Type: Corded 3. Polyester Harness, Seat/back Cushion 4. Overall Dimensions: ( L X W) 65 -75 Cm X 50 -60 Cm X 90 - 102 Cm (minimum) 5. Capacity: 40 Lbs. (minimum) 6. With 3-position Seat Recline 7. The Item Must Be Of Good Quality 10 Piece Hot Water Bag 1. Material: Rubber Or Its Equavalent 2. Color: Any Color 3. Overall Dimension: (lxw) 200- 300 Mm X 150 -200 Mm (minimum) 4. Leak-proof And Washable 5. The Item Must Be Of Good Quality 10 Piece Kettle 1. Material: Heat-resistant Hard Plastic 2. Capacity: 1- 1.5 Liters (minimum) 3. Height: 25-35 Cm (minimum) Approx 4. Voltage: 220/240 Volts, Ac 50/60 Hz 5. Power In Watts: 1000 To 1500 Watts 6.comes With Automatic Shut-off Feature And Permanent Water Level Indicator 7. Pitcher-type With Pouring. 8. Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, 9. The Item Must Be Of Good Quality 10 Set Measuring Cups .. 1/4, 13, 1/2 1 Cup Set 1. Materials: Stainless Steel 2. Set Includes: 4 Pcs./set; 3. 1 Pc. - 1/4 Cup (60 Ml) 4. 1 Pc- -1/3 Cup (80ml) 5. 1 Pc.- 1/2 Cup (125 Ml) 6. 1 Pc. - 1 Cup ( 250 Ml) 7. Thickness: .5 Mm To 1 Mm (minimum) 8. The Item Must Be Of Good Quality 10 Piece Medical Tray 1. Type: Tray 2. Material: Stainless Steel 3. Overall Dimension: (lxw X D) 300- 350 Mm X 200 -250 Mm X 12 - 19 Mm (minimum) 4. Thickness: .7 To 1 Mm (minimum) 5. The Item Must Be Of Good Quality 2 Set Mixing Bowl, Stainless, 6-piece Set 1. Material: Stainless Steel 2. Quantity Of Set: 6 Pcs./set 3. Dimension: 3/4 Qt., 1.5 Qt., 3 Qt., 4 Qt., 5 Qt., 8 Qt., 4. The Item Must Be Of Good Quality 10 Piece Pail, Plastic, 10 Liters 1. Material: Polyethylene Plastic 2. Dimension: 25-30 Cm Diameter X 23-27 Cm Depth (minimum) 3. Color: Any Color 4. Chromed Finished Handle 5. Capacity: 10 Liters (minimum) 6. Material Must Be Non-toxic 7. The Item Must Be Of Good Quality 10 Piece Pans 1. Type: Frying Pan 2. Material: Stainless Steel 3. Handle: With Hard Plastic Heat Insulation 4. Tempered Glass Lid With Steam Hole 5. Size 23 -26 Cm With Lid 6. The Item Must Be Of Good Quality 10 Piece Peeler 1. Type: Peeler 2. Blade Material: Stainless Steel 3. Handle Material: Stainless Steel 4. Overall Dimensions: 18 X 8 Cm (minimum) 5. Comes With Self-locking 6. The Item Must Be Of Good Quality 10 Piece Pick Up Forcep 1. Type: Curved Forceps 2. Material: Stainless Steel 3. Overall Length: 100-130 Mm (minimum) 4. Comes With Self-locking 5. The Item Must Be Of Good Quality 10 Piece Pillow 1. Material: Cotton 2. Color: Any Color 3. Dimensions: ( L X W) 50 - 56 Cm X 75 - 180 Cm (minimum) 4. With 4 Inches Hems 5. Washable 6. The Item Must Be Of Good Quality 20 Piece Pillow Case 1. Material: Cotton 2. Color: Any Color 3. Dimensions: ( L X W) 50 - 56 Cm X 75 - 180 Cm (minimum) 4. With 4 Inches Hems 5. Washable 6. The Item Must Be Of Good Quality 10 Piece Portable Mixer 1. Type: Portable Mixer 2. Material: Stainless Steel, Clear Acrylic 3. Capacity: 16-18 Oz. (minimum) 4. Size: 170 - 220 Mm X 75- 100 Mm 5. Requires 2 Aaa Batteries 6. Power In Watts: 250 To 300 Watts 7. The Item Must Be Of Good Quality 10 Piece Potato Masher 1. Type: Portable Masher 2. Material: Stainless Steel And Hard Plastic 3. Mesh Head Diameter: 70-90 Mm (minimum) 4. Overall Length: 250 - 270 Mm (minimum) 5. Handle Length: 120-140 Mm (minimum) 6. Washable 7. The Item Must Be Of Good Quality 5 Set Pots 1. Type: Cooking Pot 2. Material: Stainless Steel 3. Set Includes: 4 Pcs./set 4. 1 X Pot With Lid 5. 1 X Pan With Lid 6. 1 X Strainer 7. 1 X Egg Streamer 8. Size: (l X W X H) 40 To 42 Cm X 12 To 14 Cm X 26 To 28 Cm 9. The Item Must Be Of Good Quality 5 Piece Skillet 1. The Item Shall Have The Following Specifications. Material Including Handle: Cast Iron 2. Color: Any Color 3. Dimension ( Dia. X Depth): 250 - 320 Mm X 50 - 70 Mm (minimum) 4. Handle Casted With The Body And Having Plastic Or Rubber Heat Insulator 5. Body Thickness: 1.5 - 3 Mm (minimum) 6. Washable 7. The Item Must Be Branded And Have Good Quality. 5 Piece Sphygmomanometer 1. Type: Aneroid 2. Material: Nylon Cuff And Inflation Bag, Die - Cast Zinc Manometer 3. Package Inlcluded: 1 X Aneroid Sphygmomanometer. 4. Size: ( L X W X H Cm) = 18 To 20 Cm X 11 To 13 Cm X 11 13 Cm 5. Nylon Zippered Carrying Case 6. Capacity: 0 To 300 Mm Hg 7. The Item Must Have Good Quality. 5 Piece Stethoscope 1. Type: Dual Head Stethoscope 2. Material: Stainless Steel Chestpiece And Eartubes 3. Reinforced Pvc Tubing 4. Soft Pvc Eartips 5. Color: Any Color 6. Bell Diameter: 18-25 Mm Approx. 7. Diaphragm Diameter: 25-50 Mm Approx. 8. Overall Length: 66-75 Cm (minimum) 9. The Item Must Be Of Good Quality 5 Piece Urinal 1. Type: Unisex Portable Urinal 2. Material: Hard Plastic, (pp) Polypropylene 3. Color: Any Color 4. Total Capacity: 28 Oz. Minimum 5. Dimension: ( L X W X H) 270 To 290 Mm X 145 To 160 Mm X 70 To 80 Mm ( Minimum) 6. Thickness: 1 Mm To 3 Mm (minimum) 7. The Item Must Have Good Quality. 5 Piece Vacuum Cleaner 1. Material: Plastic (pp) Polypropylene Or Its Equavalent 2. Color: Any Color 3. Suction Power: 18 To 22 Kpa (minimum) 4. Tank Capacity: 24 Liters (minimum) 5. Vacuum Hose Length: 6 To 8 Ft. (minimum) 6. Power Supply: 220 V - 240 Ac , 50/60 Hz. 7. With Accesories: Extension Wand, Utility Nozzle, Standard Paper Filter 8. Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, Safety Guide 9. The Item Must Be Branded And Good Quality 3 Piece Wheel Chair 1. Type: Foldable Wheel Chair 2. Overall Dimensions: ( L X W X H) 40 - 44 Inches X 26 - 30 Inches X 34 - 38 Inches ( Minimum) 3. Folded Dimensions: ( L X W X H ) 40 To 44 Inches X 10 To 14 Inches X 34 To 38 Inches (minimum) 4. Capacity: 350 Lbs. (minimum) 5. With Padded Arm Rests; With Push-to-lock Wheel Brakes 6. The Item Must Be Of Good Quality Lot 2. Sta. Maria National High School (hairdressing Nc Ii)- Php 323,170.00 5 Pcs. Bowl, Mixing, Plastic With 10.5 Cm X 6cm 2 Pcs. Bowl, Shampoo, Stainless Steel Frame, Bowl Dimensions: 19 Inch X 20 Inch X 10 Inch With Hose Attachment Of 7 Ft. 5 Box Box, Hairpin, Metal With 3.5 X 4.5 X 0.5 Inches(100 Pcs Per Box) 5 Pcs. Brush, Applicator, Plastic With 70mm X 80mm 5 Pcs. Brush, Hair, Plastic Bristle And Wooden Handle, Width - 2 Inches 10 Pcs. Cap, Frosting, With Hook, Silicone With 31cm X 22cm,rounded Metal Hook 10 Pcs. Cap, Heating, Waterproof, Cordless With 21-24 Inches 10 Pcs. Cape, Polyester With 125 Cm X 140 Cm 5 Pcs. Chair,high, Metal Painted With Anti Rust With 15 Inches X 33 Inches, Synthetic Leather Seat 5 Pcs. Chair, Hydraulic, Metal Base With 59 Cm X 54 Cm X 51-78cm, 180kg, 360' Rotation 10 Pcs. Clamp, Plastic, Length:9.5cm, Thickness:10mm 10 Pcs. Clamp, Duck Bill, Metal, Length: 11 Cm, Elasticity Stainless Steel Spring 5 Pcs. Clipper, Hair, Body Material: Hard Plastic, Blade Material: Carbon Steel, 6 Watts 10 Pcs. Comb, Afro, Plastic, Length: 7 Inches, Width: 3.25 Inches, Number Of Teeth: 12 Teeth, Teeth Height: 2.5 Inches 10 Pcs. Comb, All Purpose, Plastic, 18 Cm Long , Has Both Fine And Medium Teeth Position On One Side Only, Height Of The Teeth: 2 Cm 10 Pcs. Comb, Haircutting, Hard Plastic, Length Including The Handle:180mm, Width: 30mm With Detachable Steel Blades And Blade Holder 10 Pcs. Comb, Large Toothed, Plastic, Size:15 Cm, Number Of Teeth: 10 Teeth, Gap Between Comb's Teeth: 0.4 To 0.5 Cm , Teeth Size: 0.3 Cm X 4cm 10 Pcs. Comb, Tail, Plastic, Size : 8 Inches X 1 Inches, Tail Length: 4 Inches Tooth Length: 3/4 Inch 10 Pcs. Comb, Teasing, Plastic,1st Row: Large Teeth 25 Mm Long, 2nd Row: Small Teeth 19 Mm, Over-all Size: 20cm X 3.8 Cm 5 Pcs. Comb, Wide Tooth, Plastic, Size:15 Cm, Number Of Teeth:10 Teeth, Gap Between Comb's Teeth:0.4 To 0.5 Cm, Teeth Size: 0.3cm X 4cm 8 Pcs. Crimpers, 25 Watts, Size:38 Cm X 15.5 Cm X 9 Cm, Maximum Temp.: 200 Degrees Centigrade, Rated Voltage:10 -230volts Ac 5 Pcs. Curling Iron, Ceramic, 65watts, 210-240volts Ac, Barrel Size: 1 Inch, Adjustable Heat Setting Of 200 Degrees Centigrade, Swivel Cord Up To 360 Degree 5 Pcs. Drip Pan, Hard Plastic, Size:17.5 X 25.8 X 1 Inches, Thickness: 1/8 Inch, Shallow Rectangular Type 5 Pcs. Dryer, Hair, 1000w, Rated Voltage: 220vac, 18.5cm X 16cm X 6.5cm With Plastic Handle Design 10 Box Gloves, Disposable, Size: 25cm X 23cm, 100 Pcs Per Box 5 Pouch Gloves, Rubber, Medium, Thickness: 4 Mil, Acid Resistant 5 Pouch Gown, Smock, Polyester, Sizes: Small (50inches X 56inches);medium (52inches X 58inches); Large (54 Inches X 60inches) 10 Pouch Hairclips, Metal, Size:67mm X 19mm 10 Pack Hairnet, Invisible, Nylon, Size: 55mm, Stretchable, Color: Black 10 Pc Headband, 6 Inches, Woven Crochet Tube 10 Pc Headband, Flannel, Cloth, Size : 45 Cm, Width: 8 Cm 6 Pc Infrared Iron, Ionic Ceramic Tourmaline-infused Plates And Abs Plastic Body, Power: 70 Watts, Power Rating: 220-240 Volts Ac; Over-all Size: 24 Cm, Heating Plate 50 Mm, Heating Time: Within 30 Seconds;variable Heat Settings: From 250 To 450 Degrees Fahrenheit 10 Pc Mirror, Hand, Plastic, Size 15 Cm Diameter, Frame Thickness: 6.5mm, Over-all Length With The Handle: 20 Cm 3 Pc Mirror, Modular, Plain Mirror, Mirror Material: Glass, Frame Material: Aluminum (cut To Fit), Dimensions: 75 Cm X 65 Cm, Mirror Thickness: 6mm 10 Pc Prong Clip, Double, Steel, Size: 45 Mm 10 Pc Prong Clip, Single,steel, Size: 55 Mm 10 Pc Razor, Straight, High Carbon Steel, Foldable Straight Razor, Replaceable Blade; Dimensions: 14 Cm X 2 Cm When Folded; Double-edged Razor Blades 3 Dz Roller Pins, Metal, Size: 60mm Long, Quantity By Dozen(12 Pieces) 10 Pc Rollers, Jumbo, Plastic 44mm In Diameter X 64mm 10 Pc Rollers, Large Sized, Plastic, Size: 40mm Diameter X 60mm Long 10 Pc Rollers, Medium Sized, Plastic; Diameter: 38 Mm ,length: 58mm 4 Pc Scissor, Cutting, Stainless Steel,length: 17cm,blade Width 10 Cm 4 Pc Scissor, Thinning, High Carbon Steel, Blade Length 6cm, Style: Right Handed Scissor, Length: 17cm 5 Pc Scoop, Plastic, Capacity:1/2 Cup, Rounded Edges With Handle Thickness: 1.5 Mm 5 Pc Shower Cap, Plastic, Size: One Size Fits All Or 30cm 5 Pc Spatula, Plastic, Dimension: 7.5 Cm X 1.5 Cm 5 Pc Spray Gun, Transparent Plastic, Capacity: 300ml, Dimension: Bottom Is 7 Cm And The Height Is 17cm 3 Pc Steamer, Hair, 450 Watts, 220 Volts/50-60hz, Hood Material: Polycarbonate, Hood 30 Cm Diameter Opening X 25 Cm, Timer Setting Is Up To 60 Minutes, 32 Ounce Water Reservoir, Adjustable Height 100- 150cm 30 Pcs. Stool, Metal, Electroplated, Load Capacity: 150kg, Design: Swivel Stool With Backrest With Hydraulic Lift To Adjust Height Freely Lot 3. Sta. Maria National High School (wellness Massage Nc Ii)-php 198,338.00 5 Pcs. Dummy, Anatomical, Plastic, 32" Tall, 27 Removable Parts That Are Held On By Metal Screws, Posts, And Hooks, Brain (2parts), Lungs (2 Parts), Heart (2 Parts, Liver, Intestines, Stomach, Base Is 13" X 9" (removable), Weighs 12 Lbs. 5 Pcs. Massage Bed/table, Hard Wood With Steel Bracings, Hardwood Frame, Marine, Plywood Deck; Color: Black, Dimensions: W:75 Cm X L:183 Cm X H: (adjustable) Height: Adjustable From 24 In. - 33in., Leg Thickness - 35mm, Cushion System: High Density Foam (7.5 Cm / 2.95") With Pu Leather Cover (1mm Thick), Weight Capacity: 250 Kg(minimum), Gross Weight: 21 Kg 2 Pcs. Massage Chair, Padded With 3" Thick, High-density, Small-cell Foam, Size: 14"-diameter Seat But Without Back And Arm Rest, With Metal Post And Hard Plastic Star, Pneumatic Spring Will Effortlessly Adjust The Height From 18" To 24" With The Pull Of A Lever, Five Heavy-duty, Smooth-rolling Wheels, Load Capacity: 265 Lbs / 120 Kg (maximum), Smooth Surface And No Sharp Edges 6 Pcs. Sphygmomanometer, 33 To 42 Cm Arm Diameters, Accuracy: ±3mm Hg;measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg Index And Range Markings On The Dial For Clear Readings, Nylon Cuff Is Durable And Stain Resistant With A Velcro Closure 6 Pcs. Stethoscope, Stainless Steel Double Chest Piece, Color: Black, Tubing Description: Y-tube Pvc, Uses Extra Soft Replaceable And Pivotable Ear Tips, The Binaural Is Chromium-plated, Chest-piece Diameter: 44 Mm And Non-chill Rim, Overall Length: 29" /74 Cm 6 Pcs. Talking Sphygmomanometer, Nylon Cuff Sizes: 33 To 42 Cm Arm Dia, Dimensions: 98mm*126mm*60mm, Measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg, Weight: 450g , Range: 20~280mmhg(0.4kpa-37.3kpa), Pressure Accuracy: ±3mmhg(±0.4kpa), Pulse Measurement Range: 40 ~199 Beats /min, Voltage: 4*aaa Alkaline Batteries 25 Pcs. Talking Thermometer, Hard Plastic, Sensing Unit: Thermistor, Measurement Range: 32 C - 42 C (89.6f-107.6f), Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f), Power Supply: 1.5v Dc, Lr41 Alkaline-magnesium Button Battery Real Voice, Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment, Dimension Approx.: 2.0 (w) X 4.4 (h) X 1.2 (d) Inches / 51 (w) X 110 (h) X 30 (d) Mms 26 Pcs. Thermometer, Digital, Hard Plastic, Sensing Unit: Thermistor, Measurement Range: 32 C - 42 C (89.6f-107.6f), Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f) Power Supply: 1.5v Dc, 1 Lr41 Alkaline-magnesium Button Battery , Power Consumption: 0.1mw, Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment, External Size (mm): 19.4(w) × 132.5 (l) × 10.0(d) 10 Pcs. White Board, White Formica Laminated, Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm Wih Plastic Corner Caps, The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube , Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels, Height From Floor: 210 To 214cm Lot 4. Sumirap National High School And Tangub City National High School (bpp Nc Ii)-php 519,702.00 10 Set Air Compressor With Airbrush Cake Decorating Set(airbrush Gravity Feed Dual Action Airbrush Compressor Kit 0.2/0.3/0.5mm Needle Air Brush For Cake Decorating Painting. Material: Aluminum + Copper Type: Single Cylinder Piston Compressor Power: 1/5 Hp Plug Type: Eu Voltage: 220-240v/50hz Speed: 1450 Rpm Air Volume Per Minute/liter: 23l/min Maximum Pressure: 7bar (100psi) Working Pressure Of Spray Gun: 15-50psi Low Noise: ≤50db Accessories: Pressure Gauge, Pressure Gauge, Air Filter Automatic Stop, Starts At 2.8 Bar, Stops At 4 Bar (special Pressures Available) Connection: With Connection G 1/8" Bsp Cable: Approx. 1.8m / 6ft) 40 Pc Egg Beater(stainless Steel Semi-automatic Mixer/manual Whisk Egg Beater Kitchen Cooking Tool) 40 Set Board, Chopping ,6 Color( Type: Food Grade Body Shape: Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 38 Cm (minimum) Width: 30 Cm (minimum) Thickness: 1.27 Cm (minimum) Color-coded For Use With Different Types Of Food, Blue, Red, Yellow, Green, Brown And White, Preferably Packed In Set Comes With No Sharp Edges And With Hole For Storage Purposes) 10 Pc Double Boiler (material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Rivetedhandle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) Must Be A Set Which Includes One (1) Saucepan, One (1) Boiler, And One (1) Lid With Stainless Steel Handle And Smooth Surfaces With No Sharp Edges) 80 Set Bowl, Mixing Set Stainless (premium Stainless Steel Mixing Bowls Bowl Sizes Are: 5 Qt, 4 Qt, 3qt, 1.5qt, And ¾ Qt And They Each Fit Perfectly Within One Another) 70 Set Cake Pan, Round, Size: 4''x3'' (non-stick Aluminum Alloy Cake Round Pan) 30 Set Cake Stand, With Tier (type: Cake Stand With Tier, Food Grade Body Shape: Circular With 3 Tier Material: Hard Plastic, Polypropylene, 4 Mm Thick The Tier Consists Of The Following Sizes: Tier 1: 18 Cm Diameter (minimum) Tier 2: 25 Cm Diameter (minimum) Tier 3 : 30 Cm Diameter (minimum) Column Diameter: 20 To 30 Mm (solid) Distance Between Tiers: 15 Cm Over-all Length: 30 Cm (minimum) Assembled Column Is Used For Maximum Strength And Stability Of The Stand Must Be Packed In Set ) 60 Pc Cake Turn Table (type: Turn Table Body Shape : Circular Material: Cast Aluminum Plate.and Cast Iron Base Upper Plate: 30 Cm Diameter (minimum) And 1.4 Cm Thickness (minimum) Base Dimensions: 18 Cm (minimum); 1.4 Cm Thickness (minimum) Total Height: 10 Cm To 15 Cm Turntable With Ball Bearing To Turn Easier Preferably Packed In Any Kind Of Packaging Comes With No Sharp Edges To Rotate Smoothly In 360 Degrees Clockwise Or Counter Clockwise ) 30 Pc Coupler (type: Foood Grade Body Shape: Tubular Material: Hard Plastic, Polypropylene, Any Bright Color Height: 3cm (minimum) Top Diameter: 1.27 Cm (minimum) Bottom Diameter: 2.54 Cm (minimum) Preferably With Storage Case The Materials Used Must Be Non-toxic And Dishwasher Safe ) 50 Set Cup, Measuring (stainless Steel Measuring Cup Set For Dry Ingredients. Composed Of 1 Cup, 3/4 Cup, 1/2 Cup, 1/4 Cup, 1/8 Cup) 50 Set Cup, Measuring 250 Ml. For Liquid Glass (250 Ml Heat Resisting Measuring Glass) 40 Set Cup, Measuring 500 Ml. For Liquid Glass (500ml Heat Resisting Measuring Glass) 40 Pc Cutter, Dough (type: Scrapper Body Shape: Straight Blade Material: Stainless Steel Straight Blade With Stainless Steel Handle Blade Dimension: Lenght : 15 Cm X Width: 11 Cm X Thickness: 1.2 Mm(minimum) Handle Dimension: Length: 15 Cm X Diameter: 3 Cm (minimum) Preferably With Packing Case Food Grade And Dishwasher Safe Design Allows Item To Be Hung For Storage) 40 Pc Cutter, Pie (stainless Steel Rolling Knife/pizza Cutter) 30 Pc Flour Sifter,hand Cranked (type: Hand Cranked Body Shape: Round Shape Material: Stainless Steel Dimension: Diameter: 133.3 Mm ( Minimum) X Height: 165 Mm (minimum) Thickness: 0.79 Mm (minimum) (body) And Constructed With Stainless Steel Wire Mesh # 30 Bottom Volume Markings Should Be Seen Inside And Outside Of The Sifter Capacity: 5 Cups (1.18 Liter) Spring Action Squeeze Handle Stainless Steel Preferably With A Packing Case Dishwasher Safe) 40 Pc Grater (type: Four Sided Box Grater Body Shape: Box In Shape Material: Stainless Steel Blade And Plastic (polypropylene Handle) Grater Dimensions: Height- 25 Cm X Width-13 Cm X Depth-10 Cm (minimum) Side 1: Large-hole Shredder With 6 Mm Hole Side 2: Slicer Side 3: Small-hole Shredder With 3 Mm Hole Side 4: Grater With Strips About 1.27 Cm To 2.54 Cm Length Preferably With Packing Case Food Grade & Dishwashing Safe) 50 Pc Knife, Kitchen (premium Quality Stainless Steel Kitchen Knife, 6-8” In Length) 20 Pc Knife, Pallete (premium Quality Stainless Steel Pallete Knife Ideal For Butter.) 50 Pc Ladle, 3oz (premium Quality Stainless Steel Soup Ladle, 3oz) 40 Pc Loaf Pan, Big (carbon Steel Non-stick Loaf Pan, Size: L=32,w=13,h=7cm Minimum) 40 Pc Loaf Pan, Medium (carbon Steel Non-stick Loaf Pan, Size: L=28, W=15.5, H=7cm Minimum) 40 Pc Loaf Pan, Small (carbon Steel Non-stick Loaf Pan, Size: L=25.5, W=13.5, H=6cm Minimum) 40 Pc Muffin Pan, Big (carbon Steel Non-stick Muffin Pan, 12 Holes,3oz) 40 Pc Muffin Pan, Medium (carbon Steel Non-stick Muffin Pan, 9 Holes,3oz) 40 Pc Muffin Pan, Small (carbon Steel Non-stick Cupcake Pan, 6 Holes) 70 Pc Pie Pan, 10'' (premium Stainless Steel/aluminum Pie Plate. Thick And Durable, 10” In Diameter) 70 Pc Pie Pan, # 8 (premium Stainless Steel/aluminum Pie Plate. Thick And Durable, 8” In Diameter) 50 Set Pillars, Cake (premium Quality Acrylic Cake Support Pillar, 12cm In Diameter(minimum),straw Size Diameter ) 60 Pack Piping Bag (reusable Silicone Piping Bag, Biggest Size, 100pcs Per Pack) 40 Pc Rectangular Pan (carbon Steel Non-stick Rectangular Cake Pan. Size: L=10.8", W=7", H=1.5", Minimum) 70 Pc Rolling Pin, Plastic (non-stick Rolling Pin Made With Food Grade Nylon, Size:13") 100 Pc Rubber Scraper, Silicone (size: 21cm X 4.1cm, Material: Silicone) 40 Pc Sauce Pan Non Stick (non-stick Sauce Pan With Lid, Size: 20cm) 40 Pc Sheet Pan / Cookie Sheet (aluminum Baking Sheet, Size: 13x18”) 50 Set Spoon, Measuring (premium Quality Stainless Steel Measuring Spoon Set, Compost Of 1/8tsp, 1/4tsp, 1/2tsp, 1tsp, 1/4tbsp, 1/2tbsp, 1tbsp)) 70 Pc Spoon,wooden (premium Quality And Durable Long Handled Wooden Spoon/ladle. Length: 30.5cm Minimum) 40 Pc Strainer (stainless Steel, Fine Mesh Strainer, Size: 18cm) 40 Set Tip, Decorating, Large (type: Tube Tips Body Shape: Nozzles With Different Shape Material: Stainless Steel Tube Height: 3.5 Cm To 5 Cm Tube Diameter: 2 Cm To 3.5 Cm Thickness: 0.5 Mm (minimum) Tube Tip: Assorted Designs (create Swirls, Rosettes, Flowers, Roping,stars, Leaves And Other Designs Comes With 24 Different Shapes Of Nozzles Packed In Plastic Storage Box Smooth And Deformities Free Must Be Branded) 30 Pc Weighing Scale, 10 Kg. (kitchen Weighing Scale, 10kg Maximum) 40 Pc Weighing Scale, 5 Kg. Digital(digital Kitchen Weighing Scale, Digital Price Computing Weight Electronic Scale, Capacity Is At Least 5kilograms, Pan Size 34.5 X 23.5cm) 70 Pc Wire Whisk, Medium (stainless Steel Wire Whisk, Size: 14”) Lot 5. Sumirap National High School And Tangub City National High School ( Cookery Nc Ii )-php 1,405,964.00 30 Pcs. Apple Corer, Body Shape: Tubular Material: Stainless Steel Total Length: 18 Cm (minimum) Handle Material: Hard Plastic, Polypropylene Handle Dimension: Length-10 Cm X Diameter-2 Cm (minimum) Blade Size: Length-8cm X Diameter-2 Cm (minimum) Preferably With Packing Case Dishwasher Safe. 4 Pcs. Bain Marie, Table, (food Warmer) Body Shape: Rectangular Material: 304 Stainless Steel, 0.8 Mm Thick (minimum) Dimensions: Length-1500 Mm X Width-700mm X Height-800 Mm (minimum) Power Soiuce: Voltage: 220 Volts - 230 Volts, 50 Hz/ 60 Hz With Royal Cord 1.5 Meter Long With Attachment Standard Type A Male Plug Or Provide Plug Adopter 10a/220v 20 Pcs. Blender, Electric Heavy Duty, Body Shape: Round Jar Material Housing: Plastic (polypropylene) Jar Height : 25 Cm To 28 Cm Jar Thickness: 4 Mm To 8 Mm Heat Resistant Glass Jar With Cover Source Voltage: 220 Volts / 240 Volts,50 Hz / 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v. Power Wattage: 300 To 700 Watts Blade: Stainless Steel, 3 To 4 Metal Blades 40 Pc Board, Chopping/ Cutting, Plastic, Body Shape: Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 15 Inches (minimum) Width: 12 Inches (minimum) Thickness: 0.5 Inch (minimum) With Hole For Storage Purposes Preferably With Packing Case Food Grade And Dishwasher Safe. 20 Pcs. Boiler, Double, Material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) 30 Pcs. Braising Pan, Medium, Body Shape: Round Material: Enameled Cast Iron And Stainless Steel Size: Diameter: 28 Cm X Height: 10 Cm (minimum) Capacity: 4 Liters (approximate) With Stainless Steel Cover, Solid Cast Stainless Steel Side Handles And Riveted Handle On Both Side: Length: 10 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 30 Pcs. Can Opener, Body Shape: Materials: Stainless Steel Dimension: Length-21 Cm X Width 10 Cm X Depth:2.5cm (minimum) Multi-use: 3 In 1 Can Opener Also Opens Bottle Tops- Can Lids And Tabs. 30 Pcs. Casserole,medium Pot, Body Shape:round Material:stainless Steel, 0.7 Mm Thick Dimension: Diameter- 24 Cm X Height -14 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Preferably With Packing Case . 30 Pcs. Casserole,small Pot, Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick Dimension: Diameter- 20 Cm X Height -12 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm. 20 Pcs. Colander, Medium, Medium Body Type: Round Material: 304 Stainless Steel Diameter: 30 Cm (minimum) Capacity: 8 Quarts (9 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 To 10 Mm Body Thickness: 0.8 Mm (minimum) 20 Pcs. Colander, Small, Body Shape: Round Material: 304 Stainless Steel Diameter: 26 Cm (minimum) Capacity: 5 Quarts (5.6 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Body Thickness: 0.8 Mm (minimum) Full-ring Support Base, 15 Cm Diameter Preferably With Packing Case Food Grade And Dishwasher Safe 20 Set Cup,measuring( For Solid) Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 20 Pcs. Dispenser,paper Towel Body Shape: Rectangular Material: Abs Plastic Dimensions: Length =260 Mm X Width =100 Mm X Height = 211 Mm (minimum) Capacity: 200 Paper Paper Size: Length-20 Cm X Width- 8 Cm (approximate) Mounting Style: Wall Mounted Tissue Box 12 Pcs. Fan, Electric, Ceiling Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names 6 Pcs. Fire Extinguisher With Contents .for Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2.portable Type 3.capacity : 5 - 6 Kgs 4.rechargeable Cylinder Metal 5.working Pressure Of Cylinder : 400 Psi 6.brass Valve With Pressure Gage 7.with Rubberized Hose And Aluminum Nozzle Attached 8.with Squeeze Lever To Discharge And Safety Pin 10.painted With Metal Primer And Red Enamel Paint 20 Pcs. Fish Poacher,medium, Body Shape: Oval Pot For Poaching Material: Stainless Steel, 0.64 Mm Thick Dimensions (l X W X D): 45 Cm X 15 Cm X 12 Cm (minimum) Handle Material: Stainless Steel Riveted Looped Handles On Both Side, 7 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Includes Stainless Steel Lid With Handle And Removable Insert 20 Pcs. Fork, Carving Body Shape: Square Shape Prong Prong Material:high Carbon Stainless Steel Overall Length: 30 Cm (minimum) Blade Dimension: Length- 15 Cm X Width- 0.5 Cm X Thickness- 0.3 Cm (minimum) Number Of Prongs: 2 Prong Comes With Square- Shaped Prongs And Pointed Tips Abs Plastictriple-riveted Handle Preferably With Packing Case 400 Pcs. Fork, Kitchen Body Shape: Standard Material: Stainless Steel Dimension: Length - 32 Cm X Width- 3.5 Cm (minimum) Fork Size: Length: 8 Cm X Width -3.5 Cm (minimum) Handle :abs Plastic Number Of Tines: 2 Tines With Tapered End 36 Dozen Frying Pan, Large, Non Stick, Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-30 Cm (minimum) X Height- 5.5 Cm (minimum) 40 Pcs. Frying Pan, Medium, Non Stick, Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-24 Cm (minimum) X Height- 4.5 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 19 Cm Long (minimum) Preferably With A Packing Case 30 Pcs. Frying Pan Small, Non Stick , Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-20 Cm (minimum) X Height- 3.8 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 12 Cm Long (minimum) Preferably With A Packing Case Oven Safe Up To 250⁰f 22 Pcs. Funnel, S/s, Medium, Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-15 Cm (minimum) X Height- 15.8 Cm (minimum) Tube Diameter: 2 Cm X Length: 7.3 Cm (minimum) Comes With Handle For Easy Hanging Preferably With Packing Case Dishwasher Safe 22 Pcs. Funnel, S/s, Small, Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-11 Cm (minimum) X Height- 10 Cm (minimum) Tube Diameter: 1.5 Cm X Length: 5 Cm (minimum) Comes With Handle For Easy Hanging Preferably With A Packing Case Dishwasher Safe. 20 Pc Garbage Bin, Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-11 Cm (minimum) X Height- 10 Cm (minimum) Tube Diameter: 1.5 Cm X Length: 5 Cm (minimum) Comes With Handle For Easy Hanging Preferably With A Packing Case Dishwasher Safe. 20 Pc Glass Rack, Body Shape: Square Material: Polypropylene Plastic Overall Dimensions: Length - 19 1/2 Inches X Width - 19 1/2 Inches X Height - 4 Inches (minimum) Compartments: Full-size 25 Individual Compartment Glass Rack Compartment Dimensions: Length - 3 1/2 Inches X Width - 3 1/2 Inches X Height - 4 Inches (minimum) Easy Grip Handles Molded Into All Four Sides Preferably With A Packing Case 20 Pc Ice Cream Scoop, Stainless Steel Ice Cream Scoop 45mm. Simply Squeeze Handle. 30 Pc Knife,boning, Body Shape: Ergonomic Material: High Carbon Steel Overall Length: 28 Cm (minimum) Blade: Length-15 Cm X Width- 3 Cm (minimum), Pointed Tip Cutting Edge Angle From Tip To The Heel Is 13 To 14 Degrees Handle Length: 12 Cm (minimum) Handle Material: Hard Plastic Handle With Rivets Preferably Wiht Packing Case Dishwasher Safe 30 Pc Knife,chef, Body Shape: Flat Materials: Stainless Steel Overall Length: 30 Cm (minimum) Blade Size: Length - 20 Cm X Width-4 Cm (minimum) Blade Thickness: 2.5 Mm (minimum) 30 Pc Knife,cleaver, Cutting Edge: Straight, Pointed End Type: Cleaver Knife Body Shape: Flat Blade Material: Forged Stainless Steel Heavy Duty Blade Length: 17 Cm (minimum) Overall Length: 30 Cm (minimum Cutting Edge: Straight Handle Material: Ergonomic Wood Handle With Triple Rivets Blade Thickness: 3 Mm (minimum) 30 Pc Knife,oyster, Body Shape: Ergonomic Blade Material: Stainless Steel Blade Dimension: Length - 7 Cm (minimum) X Width - 2 Cm (minimum) Blade Thickness: 2 Mm (minimum) Handle Material: Smooth Wooded Handle Rounded Handle Size: Length-10 Cm X Diameter- 3.5 Cm (minimum) Total Length (from The Tip Of The Handle Up To Tip Of The Blade) :17 Cm (minimum) 4 Pc Light,emergency, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector 4 Pc Meat Slicer, Body Shape: Circular Housing Material: Die Cast Aluminum Alloy And Body Painted Dimensions: Width-40.5 Cm X Depth- 45.7 Cm X Height- 38 Cm (minimum) Stainless Steel Rotary Blade Diameter: 190 Mm (minimum) Power Source: 220 Volts-230 Volts, 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v 30 Set Pastry Tube, Stainless Steel Pastry Tube 24, Big 40 Pc Peeler, Y -type, Rack Dimension: Length: 38 Cm X Width 23 Cm (minimum) Type: Y-type Peelers Body Shape: Ergonomic Material: Stainless Steel Overall Dimensions (l X W X H): 7 Inches X 2 1/4 Inches X 1 Inch (minimum) Blade Material: 304 Stainless Steel, 0.7 Mm Head Dimension: (l X W X H) 2 1/4 Inches X 2 1/4 Inches X 1 Inch (minimum) Handle Material: Stainless Steel Handle Length: 4 3/4 Inches X 1 Inch Diameter (minimum) 2 In 1 Design With 2 Blade Reel, Built In Potato Eye Remover And Hole For Hanger Preferably With A Packing Case 14 Set Pepper And Salt Mill Food Grade And Non-toxic Material. Mill Cookery Nc Ii Type: Pepper & Salt Mill Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism 20 Pack Piping Bag, Body Shape: Triangular Material: Transparent Disposable Plastic For Dispensing Ingredients To Pastries Length: 9 Inches Minimum Width: 3 Inches (minimum) Volume: 500 Ml (approximate) 10 Pc Plate Rack Shape: Rectangular Material: 304 Stainless Steel Dimension: Length-475 Mm X Width- 290 Mm X Height- 380 Mm (minimum) 12 Set Preparation Table With Sink, Heavy Duty Wire Shelving, 2.6 Mm Diameter (minimum) Table With Sink Cookery Nc Ii Type: Preparation Table With Sink & Sheleves Body Shape: Rectangular Material: Stainless Steel, 1 Mm Thick (minimum) Dimensions: L-1200 Mm X W - 700 Mm X H - 850 Mm (minimum) Stainless Steel Table Top And Stainless Steel Under Shelf Fully Welded Construction Sink: Left Side Single Bowl Sink With Drainer 4 Inches & Faucet Provision Sink Dimension (l X W X D) 400 Mm X 500 Mmx 25 Mm (minimum) 4 Pc Pressure Cooker, Cooker Body Shape: Round Material: Polished Aluminum Dimension: Diameter: 32 Cm X Height: 25 Cm (minimum) Capacity: 10 Quarts (11.3 Liters) Side Handles For Secure Carrying Equipped With Safety Opening Mechanism, Spring Safety Valve, Rubber Seal Ring 24 Pc Roasting Pan , Body Shape:rectangular Material: Stainless Steel Dimension: Length: 40 Cm X Width-35 Cm X Height -7 1/2cm (minimum) Thickness: 1.5 Mm Thick (minimum) Welded Handles On Both Sides Removable Stainless Steel Wire Rack 40 Pc Scissor, Kitchen Type:kitchen Scissor Body Shape: Ergonomic Blade Material: Stainless Steel, 2 Mm Thick Handle Material Heavy Duty Acrylonitrile Butadiene Styrene (abs) Plastic Overall Length: 20 Cm (minimum ) Width: 7.5 Cm (minimum) 30 Pc Siever,small Type: Fine Mesh Siever Body Shape: Round Material: Stainless Steel Diameter: 20 Cm (minimum) Depth: 7 Cm (minimum) Twin Wire Handle: Length 20 Cm X 5 Mm Diameter (minimum) Fine Mesh: 0.7 Mm (1/32 Inch) (minimum) Preferably With A Packing Case 30 Pc Skimmer, Fine Type: Medium Fine Mesh Skimmer Body Shape: Round Material: Stainless Steel, Polished Overall Length: 34 Cm (minimum) Skimmer Head: Diameter -10 Cm X Depth- 4 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle: Length- 12 Cm X Diameter- 2 Cm (minimum) Handle Has Hole For Hanging Preferably With A Packing Case 30 Pcs. Skimmer,spider, Dishwashing Safe Type: Skimmer, Spider Body Shape: Round Material: Stainless Steel, Polished Overall Length: 35 Cm (minimum) Skimmer Head Diameter: 15 Cm X Depth 4 Cm (minimum) Handle Length: 12 Cm X 2 Cm Diameter (minimum) Preferably With A Packing Case Dishwasher Safe. 24 Pcs. Soup Cup, Rack Body Shape: Square Material: Polypropylene Plastic Dimension: Length: 50 Cm X Width: 50 Cm X Height: 10 Cm (minimum) Compartment Length: 11 Cm Compartment Width: 11 Cm Compartment /inside Height: 6.7 Cm No. Of Compartment: 16 Compartments 20 Pc Soup Ladle, 12oz Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 34 Cm (minimum) Capacity: 12 Oz. (341 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe 20 Pc Soup Ladle, 3 Oz Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 28 Cm (minimum) Capacity: 3 Oz. (85 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe Must Be Branded 20 Pc Soup Ladle 6 Oz. Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 6 Oz. (170 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe 20 Pc Soup Ladle 8 Oz. Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 8 Oz. (236 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case 62 Pc Spatula, Type: Offset Spatula Body Shape: Flat Blade Material: Stainless Steel 316 Handle Material: Hardwood (smooth Finish) With Rivets Blade Dimension: Length= 7 .5 Inches X Width-1.5 Inches (minimum) Thickness Of Blade: 1.7 Mm Thick (minimum) Total Length = 12 To 14 Inches Preferably With A Packing Case Dishwasher Safe Must Be Branded. 400 Pc Spoon, Kitchen Body Shape: Oval Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type Preferably With A Packing Case Heat Resistant Up To 220 ° C Dishwasher Safe Must Be Branded. 60 Pc Spoon, Kitchen (slotted) Kitchen Spoon Slotted Body Shape: Oval With Slot Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) 30 Set Spoon, Measuring Body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. ( 7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) 40 Pcs. Spoon, Parisienne Body Shape: Round Double Headed Parisiennes Scoop Bar Tool Material: Stainless Steel, Polished Overall Length: 240 Mm (minimum) Scoop Diameter: 30 Mm And 24mm (minimum) With Plastic Handle (polypropylene), Size: 130 Mm X Width-20 Mm (minimum) Draining Small Hole In The Scoop 40 Pc Spoon, Serving Preferably With A Packing Case Type: Serving Spoon Body Shape: Oval Materials: Stainless Steel Dimension: Length: 23 Cm X Width: 5 Cm (minimum) Scoop Dimension (l X W X D): 7 Cm X 5 Cm X 0.9 Cm (minimum) Spoon Thickness: 1.6 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 30 Pc Spoon,wooden Body Shape: Oval Material: Hardwood Dimensions: Length- 10 Inches X Width- 2 Inches (minimum) Bowl Dimension: Length -3 Inches X Width 2 Inches X Depth -3/4 Inches (minimum) Total Length: 10 Inches (minimum) Preferably With A Packing Case Smooth Surface Finished And No Sharp Edges 20 Pc Stock Pot,large . Body Shape: Round Material: Stainless Steel, 0.8 Mm Thick (minimum) Top Diameter: 30 Cm (minimum) Height: 31 Cm (minimum) 30 Pc Strainer, Chinois,small Body Shape: Conical Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 21.5 Cm (minimum) Handle Length: 20 Cm (minimum) With 2 Mm. (approx.) 30 Pc Strainer,chinois,medium Medium Body Shape: Conical Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 21.5 Cm (minimum) Handle Length: 20 Cm (minimum) With 2 Mm. (approx.) 26 Pc Strainer,medium,fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 7 Cm (minimum) Handle Length: 18 Cm (minimum) With 2 Mm. (approx.) 30 Pc Strainer, Small,fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 13 Cm (minimum) Strainer Depth: 5 Cm (minimum) Handle Length: 13 Cm (minimum) With 1 Mm. (approx.) 30 Pc Tenderizer, Medium Aluminum Meat Tenderizer 16 Pc Thermometer,pocket/pin Pocket/pin Food Thermometer 20 Pc Tong,12'' Body Shape: Standard Material: Stainless Steel Size: 12 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 20 Pc Tong 8'' Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 30 Pc Tray,baking,small, Tray Body Shape: Rectangular Material: Stainless Steel Dimension: 20 Cm X 30 Cm X 3.7 Cm (minimum) 36 Pc Tray,utility,medium,plastic White Plastic, White Multi Purpose 13”x10”utility Tray 30 Pc Turner,3'x6'', Slotted Turner, 3" X 6" Type: Slotted Turner, 3" X 6" Body Shape: Straight Material: Stainless Steel Blade Size (lx W): 6 Inches X 3 Inches (minimum) Handle Length: 5 Inches (minimum) Overall Length: 13 Inches (minimum) Solid Turner With Straight Slotted Blade Wooden Handle With Triple Rivets Preferably With A Packing Case Dishwasher Safe Must Be Branded 4 Pc Utility Cart, Stainless Steel 3 Tier Trolley Cart 75x40x85. 20 Pc Weighing Scale 1 Kg. Digital Type: Digital Weighing Scale Body Shape: Rectangular Materials: Engineering Plastic And Stainless Steel Weighing Plate Capacity: 1 Kg Accuracy: 1 Gram Back Light Lcd Display With 15 Mm Minimum High Digits Weighing Units: Gram, Ounce, Pound Size: (l X W X H Mm ) 163 Mm X 245 Mm X 79 Mmm (minimum) 20 Set Weighing Scale 5kg. Type: Mechanical Weighing Scale Body Type: Circular Bowl Material: Stainless Steel Bowl And Metal Body (coated) Mechanism Type: Spring Lever Capacity: 5 Kg /11 Lb. Sensitivity/graduated By 10 Gm Measurement Units: Gram/kilogram Manual Setting On Zero, Must Be Accurate And Durable Calibrate The Scale Using The Adjustment Knob Preferably With A Packing Case Delivery Must Include Instruction Manual Written In Good English With Service Centers Located In The Major Cities In The Philippines Warranty Period Of 1 Year (parts And Service) Must Be Branded 40 Set Wire Skimmer Small, Type: Skimmer, Wire Mesh Body Shape: Round Material: Stainless Steel, Polished Overall Length: 40 Cm (minimum) Skimmer Head Diameter: 12 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle Has Hole For Hanging Preferably With A Packing Case Dishwashing Safe Must Be Branded. 40 Pc Wire Whisk Heavy Duty Type: Wire Whisk, Heavy Duty Body Shape: Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 40 Pc Wire Whisk, Medium, Type Wire Whisk, Medium Body Shape: Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 40 Pc Wire Whisk,small, Type: Wire Whisk, Small Body Shape: Baloon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 20.3 Cm X 6 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 18 Pc Wok,medium Type: Wok, Medium Body Shape:round Material: Carbon Steel Thickness: 1.8 Mm Thick (minimum) Dimensions (dia. X H): 45 Cm X 14 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 10 Cm (minimum) With Flat Bottom Preferably With A Packing Case Dishwashing Safe Must Be Branded 18 Pc Wok,small Type: Wok, Small Body Shape: Round Material: Carbon Steel Thickness: 1.5 Mm Thick (minimum) Dimensions (dia. X H): 36 Cm X 10 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 8 Cm (minimum) With Flat Bottom Preferably With A Packing Case Dishwashing Safe Must Be Branded 12 Pc Working Table, Stainless, 4 Seaters Stainless Working Table , Two Layer (120x60x80) 30 Pc Zester, Type: Cheese Zester Body Shape: Standard Material: Stainless Steel Grating Surface Dimensions (l X W): 20.3 Cm X 4 Cm (minimum) Overall Length: 32.5 Cm (minimum) Handle Material: Plastic (polypropylene) Ergonomic Handle Preferably With A Packing Case Dishwasher Safe The Plastic Material Used Must Be Non-toxic Must Be Branded. Lot 6. Sumirap National High School (housekeeping Nc Ii)-php 326,452.00 1 Pc Alarm Clock Alarm Clock, Digital, Overall Dimensions: 13.5 X 8 X 4.5 Cm (approx.) Material: Plastic (pe/abs) Illuminated Lcd Digital Display: Time (12/24), Calendar (mm/dd), Temperature, Alarm Status (on/off), Snooze Display Size: 10 X 5 Cm (minimum), Time Can Be Read 30 Ft Day Time. Runs On Aaa Battery Which Come Together With The Item Smooth Surface, No Sharp Edges, Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting) 25 Pc Apron, Polyester-cotton (bib Apron, Sleeveless Adjustable Neck Loop Material : Polyester - Cotton Fabric Dimension : 70 To 60 Cm (minimum) With 2 Or 3 Pockets Uni-color, Dark No Sharp Edges And Loose Threads) 5 Pc Baskets, Laundry (3 - Bag Laundry Sorter, With Wheels Bag: Polyester, Rectangular Shape, Detachable From Frame With Metal Handle And Hanging Hook Bag Dimensions : Rectangular 22 X 15 X 8 Inch (minimum) Frame Material : Corrosion Resistant Steel, Sturdy No Wobble Frame Overall Dimensions : Rectangular, 31 X 30 X15 Inch (minimum) With Four Casters, 2 Inch Diameter (minimum) Smooth Surface, No Sharp Edges) 1 Set Bed, Queen (bed Set, Queen Size (60 X 75 Inch) Rectangular 1) Frame: Knock-down Type, All Steel, Powder Coated Including Head Board, Bare Weight: 20 Kg (minimum) No Wobble And Noise 2) Comes With Fabric Covered Foam 6 Inches Thick Foam Density: 29 -33 Kg/cu.m. 3) No Sharp Edges) 1 Set Bed, Single (bed, Single Size (w36 X L75 Inch) Rectangular 1) Frame: Knock-down Type, All Steel, Powder Coated Including Head Board, Bare Weight: 13 Kg (minimum) No Wobble And Noise 2) Comes With Fabric Covered Foam 6 Inches Thick Foam Density: 29 -33 Kg/cu.m. 3) No Sharp Edges) 10 Pc Board, Ironing (type: Foldable Type Ironing Board Body Shape : Standard Material : 25 Mm Tubing Approx., 0.8 Mm Thickness Board Size: 32 Inches (minimum ) Body Size :120 Cm X 30 Cm X 5 Cm Color : Any Comes With Box No Sharp Edges) 25 Pair Boots, Safety, Plastic (upper Material: Elastic Pvc Sizes: 7 Inches - 5pcs 8 Inches - 5pcs 9 Inches - 5pcs 10 Inches -5pcs 11 Inches - 5pcs Height: 13 To 14 Inches Plain Toe Type Of Boots: Unisex Rain Boots With Rugged Tractor Lug Outsole Packed With Carton Box Per Size) 15 Pc Brushes, For Housekeeping (brush, Floor Scrubbing, Angled Long Handle Bristle Material : Plastic, Stiff Handle Material : Metal Tubular Corrosion Reistant, Overall Length : 120 Cm. (minimum) Bristle Length : 5 Cm (=/- 1cm) Scrubbing Surface : 25 X 6 Cm (+/-1 Cm) No Sharp Edges) 10 Pc Buckets, Water (water Bucket Bucket Material : Hard Plastic, Round Body Capacity : 10 To 12 Liters Handle Material : Steel Smooth And Glossy Surface, No Sharp Edges) 10 Pc Caddy, Toilet (carrying Caddy For Toilet Cleaning Supplies Holds Spray Bottles And Other Cleaning Supplies, No. Of Compartments: 3 (minimum) Material :plastic Tray Depth: 11 Cm (approx.) Overall Dimension: 36 X 26 Cm (approx.) Smooth Surface, No Sharp Edges) 1 Unit Carpet Sweeper (carpet Sweeper, Cordless Electric Motorized Single Brush Roll (removable) Body Material : Hard Plastic ,(abs) Or Its Equivalent, Any Color Equipped With Rechargeable Battery (16 Minutes Run Time On Carpet), Removable Dirt Box Sweep Width : 8 Inches (minimum) Capacity (volume) : 0.35 Lit.(minimum) Handle: Metal, Powder- Coated, With Plastic/rubber Grip, Swivel Steering Assembled Height: 44 Inches (minimum) Comes With Battery Charger 220/240vac, 50/60hz With Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) No Sharp Edges Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting.) 1 Unit Cart, For Housekeeping Nc Ii (housekeeping Cart Trolley, Equipped With Three-shelves With Steel/laminated Panels Single Door, Top Layer With Divider, Bag Holder, And 4 Wheels. Cart Frame: Steel, Powder Coated. Wheels: 2non-swivel 2 Swivel, 6 Inch Diameter, Non-markings. Overall Dimensions : Rectangular 90 X 48 X 1010 Cm (minimum) Comes With Accessory Linen Bag Smooth Surface, No Sharp Edges) 50 Pc Cleaning Cloth, Linth-free (lint Free Cleaning Cloths Material : Cotton Dimensions : Rectangular 16 X 26 Inch) 1 Unit Coffee Maker (coffee Maker, Electric Material: Metal, Plastic, Glass. Capacity: 6 Cups (minimum). Detachable Tank, With Water Level Indicator. Non-stick Warming Plate : Removable And Washable Filter Non-drip Valve : Lighted On/off Switch Power Supply: 220 V -240 V Ac 50/60 Hz , 500w Minimum Comes With A Heat Resistant Glass Pitcher. With A 1 Meter (minimum) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option). Smooth Surface, No Sharp Edges With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item. Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, Safety Guide. 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines) 5 Pc Dust Pan (dust Pan, Upright Standing Material: Plastic Overall Length: 65 Cm (minimum) Pan: Round Back, 24 X 26 X 9 Cm (minimum) Smooth Surface, No Sharp Edges) 5 Pc Duster, Anti-static (anti-static Duster Duster Material : Polypropylene Micro Fiber Duster: Length : 30 Cm (minimum), Overall Length: 50 Cm (minimum) Handle Material : Hard Plastic, No Sharp Edges) 7 Unit Fan, Electric ( Stand Fan, Electric Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 1 Year Warranty Parts And Service) 3 Pc Fire Extinguisher(with Contents) (1.for Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2.portable Type 3.capacity : 5 - 6 Kgs 4.rechargeable Cylinder Metal 5.working Pressure Of Cylinder : 400 Psi 6.brass Valve With Pressure Gage 7.with Rubberized Hose And Aluminum Nozzle Attached 8.with Squeeze Lever To Discharge And Safety Pin 10.painted With Metal Primer And Red Enamel Paint 11.includes With User's Guide In English That Contains: A. Operating Procedure On How To Use The Equipment B. Safety Precaution When Using The Equipment 12.1 Year Warranty Parts And Service 13.the Item Must Be Branded And Have Good Quality) 10 Pc Flashlight (flashlight Led 1,000 Lumens (minimum), Color : White , Battery: Rechargeable, At Least 3,500 Mah , Can Be Used Also With 3 X Aaa Batteries; Body: Aluminum Alloy, No Sharp Edges Dimensions : 5 Inches X 1 Inch Diameter (minimum) Operating Duration Of Battery When Fully Charged : At Least 2 Hours; Includes 220/240vac, 50/60hz Power Adapter /charger And User's Manual In English Which Includes: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures Branded, With 1 Year Warranty 10 Pc Flat Iron (clothes Flat Iron, Electric Material : Metal /plasic Body, Heat-resistant Plastic Handle, Aluminum Sole Overall Dimension : (l X W X H) 25 Cm X 12 Cm X 12 Cm (minimum) Power Rating : 220/240 Vac, 50/60 Hz; 1000 Watts (minimum) Equipped With Light Indicator, Variable Temperature Control, Overheat Protection, Power Cord And Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges, Comes With English Manual That Contains : Users Guide, List Of Parts, Maintenance Guide, Safety Guide. The Item Must Be Branded, With Dti-bps Certification 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines.) 10 Pc Foam, Scrubbing (1. Material: Cellulose And A Scouring Pad On One Side 2. Dimension: Length : 140 - 180 Mm ; Width : 80 - 100 Mm ; Thickness : 12 - 20 Mm 3. The Item Must Be Of Good Quality) 4 Pc Garbage Receptacles (1.bucket / Tub Material : Hard Plastic, (ps) Polystyrene 2.bucket / Tub Color : Any Color 3.capacity (gallons) : 3 Gal. (minimum) Comes With A Cover 4.the Item Must Have Good Quality) 30 Pair Gloves, Rubber (1.heavy-duty Latex-free Vinyl Rubber Gloves 2.thickness : 4 Mil 3.color : Any Color 4.size : Medium 5.other Features: Acid/solvent Resistant. 6.the Item Must Be Of Good Quality) 15 Pc Goggles, Safety (safety Goggles, Clear Polycarbonate - One Piece Lens With 180° Panoramic View, Non-fog Size/dimension: L 17 - 18.5 Cm X W 8 Cm X D 5-7.5 Cm High Impact Resistant, Ansi "z87" Compliant Firm And Comfortable Seal Around Forehead, Cheeks, Nose And Temples Protects Against Splash, Chemicals, Dust Adjustable Head Strap Shall Bear Mark Z87 Embossed Or Engraved Or Etched On The Item. Smooth Surface, No Sharp Edges) 1 Pc Hairdryer( Electric Hairdryer, With Concentrator Nozzle Two Heat Setting And 1 Speed (minimum) Rating : 220/240 Vac, 1200 W (minimum) Body Length Including Nozzle: 20 Cm Folding Handle Design, With Hanging Ring Smooth Surface, No Sharp Edges Branded, Brand Name And Electric Rating Permanently Mark On The Item, With Dti-bps Certification With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. With Service Centers Located In Major Cities In The Philippines. 1 Year Warranty(parts & Service) 2 Roll Hose, Water(water Hose Material: Pvc Fiber Reinforced, Three (3) Layers; Any Color; Hose Length: 50 Feet; Hose Diameter: 5/8 Inches; Pressure Capacity: 200 Pounds Per Square Inch (minimum); Fitted With Male And Female Brass Couplers (nh, 11.5 Tpi) For Spray Nozzle No Sharp Edges) 3 Pc Kettle, Electric(electric Kettle Cordless (with Pouring Spout), Hinged Lid, Detachable From And Can Rotate On Its Corded Base Material : Round Stainless Body, Plastic Handle, Lid And Base Capacity : 1.5 To 2 Liter Automatic Shut - Off, With Power Indicator Light Power Rating: 220//240vac, 50/60hz, 1000 -1600 Watts Base With A 50 Cm (minimum) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges; Dti-bps Certified Comes With English Manual That Contains: Operation Procedure, Maintenance And Safety Guide. The Item Must Be Branded, Brand Name And Electrical Ratings Permanently Mark On The Item.) 5 Pc Laundry Sorter(3 - Bag Laundry Sorter, With Wheels Bag: Polyester, Rectangular Shape, Detachable From Frame With Metal Handle And Hanging Hook Bag Dimensions : Rectangular 22 X 15 X 8 Inch (minimum) Frame Material : Corrosion Resistant Steel, Sturdy No Wobble Frame Overall Dimensions : Rectangular, 31 X 30 X15 Inch (minimum) With Four Casters, 2 Inch Diameter (minimum) Smooth Surface, No Sharp Edges) 2 Pc Light, Emergency(emergency Light, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector Power Rating: 220 -240 Vac , 50/60 Hz 20-24 Hours Charge Time Dimensions: Rectangular 27 X 7 X 27 Cm (approx.) Sooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures The Item Must Be Branded, Brand Name And Electrical Ratings Permanently Mark On The Item.) 2 Pc Mirror Wall Mirror With Frame Flat Glass Mirror, 2 Mm Thick (minimum), Clear With No Distortion Frame: Wood Or Plastic Commercial Finish Rectangular Shape, 3600 Sq.cm (minimum) Includes Mounting Accessories Smooth Surface, No Sharp Edges) 20 Pc Mop (mop, Handle And Mop Head Set, Refillable Head Handle: Aluminum Or Anti-rust Coated Steel, With Hard/stiff Plastic Mop Head Holder, Clip Type With Tightening Knob Overall Handle Dimension: 130 X 19 Cm (minimum) Mop Head: Cotton Thread/yarn, Sewn Tailband, L 34 X 16 X 4 Cm (minimum), White Handle: Plated Steel Tube Or Wood, Length : 40 (minimum), No Sharp Edges 1 Set Polisher, Floor, Electric, With Accessories(electric Floor Polisher With Accessories Material: Stainless Steel, Aluminum Alloy Handle: Stainless Tube, Adjustable Height 1 Meter Long (approximate), With Dual Switch Lever Size/capacity :13 Inch (minimum) Diameter Power Supply: 220/240 Vac, 50/60 Hz. Power: 1/3 Hp (minimum) Rotation Speed : 160 Rpm (minimum) Heavy Duty (royal) Power Cord Length : 12 Meters (minimum) With Type A Plug (or Providing 10a Plug Adapter Is An Option) With Pair Of Rubber Wheels, Smooth Surface, No Sharp Edges Comes With Pad Holder, 2 Pcs - Polishing Brush And 3 Pcs - Floor Polishing Pads Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures Branded, Brand Name And Electric Rating Permanently Mark On The Item, With 1 Year Warranty Parts And Service The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market.) 5 Pc Shelving(shelving, Open, Knockdown Type, Adjustable Shelves Metal Powder Coated Frame Number Of Shelves : 5 Overall Dimensions : 85 X 30 X 180 Cm(minimum) Sturdy Connection, No Wobble Smooth Surface, No Sharp Edges) 5 Pc Sign, Caution(caution Sign, A Shape-2 Panel Self Standing, With D-handle, Collapsible For Easy Storage Material : High Impact Plastic, Panel Dimension : Rectangular (lxw) 55-65 Cm X 25 X 61 0m (minimum), Panel Depth : 2 Cm (minimum) Color : Yellow Print Description : "caution: Wet Floor" On One Side "cleaning In Progress On The Other Side, Both Messages Provided With Graphics Printed In Black. Font Size: 100 -120 Mm X 50 -70 Mm, Arial Smooth Surface, No Sharp Edges) 10 Pc Sponges, Dish(dish Sponge, Cellulose, Non-scratch Dimensions : 5 X 3 X 1 Inch (minimum) Branded) 10 Pc Spray Gun, Water(barber/salon Spray Gun Material: Hdpe Transparent Plastic Capacity: 300 Ml.(minimum) Trigger Type Sprayer Dimension: Diameter :7 Cm. X Height: 16.3 Cm (minimum) Rotating Nozzle To Adjust Spray Patterns Smooth Surface, No Sharp Edges Must Be Branded) 10 Pc Squeegee(squeegee, Short Handle Head/blade Material: Stainless, Rubber Handle: Plastic Or Stainless Steel Blade Length: 25 - 30 Cm Overall Length (handle And Head) 20 - 32 Cm No Sharp Edges ) 5 Pc Squeezer, Mop(mop Bucket With Squeezer/wringer And Wheels Hand Lever To Squeeze, Made Of Metal, With Hand Grip Material : Hard Plastic, (ps) Polystyrene Or Its Equivalent Capacity : 30 L (minimum) Overall Dimension (excluding Handle: ( L X W X H ) 40 X 27 X 57 Cm (minimum) Color : Yellow With 3 Inches Non-marking Rubber Casters "caution" Printed In Black On Both Sides Of The Mop Bucket Smooth Surface, No Sharp Edges) 1 Pc Step Ladder(material: Aluminum U Channel Capacity: 250 Lbs (minimum) Type: Flatform Type Number Of Step: 6 (including Top Step) Reach Height: 6 To 8 Feet(minimum) Width: 15 Inches Minimum Spread: 4 Feet (minimum) Twin Steps With Gripped Treads To Prevent Slipping Step Braces On Top And Bottom Step Heavy Duty Aluminum Foot Bracket With Slip-resistant Foot Pad With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, Brandedfeet(minimum) Width: 15 Inches Minimum Spread: 4 Feet (minimum)) 2 Pc Vacuum Cleaner, Dry And Wet(electric Vacuum Cleaner, Wet And Dry Function, Sucks Even Screws, With 4 Swivel Caster Wheels Material : Hard Plastic, (abs) Or Rust Proof Body Equivalent Power Supply : 220/240vac, 50/60hz, 1000 Watts (minimum) Auto Shut Off Tank Capacity : 20 Liters (minimum) Equipped With Complete Accessories I.e., Detachable Vacuum Hose Assembly (flexible Non-kink), Extension Tubes/wands, Carpet (long Square) Brush Nozzle, Wet And Dry Floor Brush Nozzle, Crevice Nozzle, Hepa Filter, Sponge Filter/washable Cloth Bag. Comes With 4 Meters (minimum) Heavy Duty (royal) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. The Item Must Be Branded, Brand Name And Electric Rating Permanently Mark On The Item. 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market.) 1 Unit Washer, Laundry(1. Front Load Electric Washer, Laundry 2. Electronic Control, Digital Indicator Display , Transparent Glass Door 3. Body Material : Steel, Powder Coated, Any Color 4. Dimensions (wxdxh): 590 Mm (minimum) X 490 Mm (minimum) X 820 Mm (minimum) 5. Drum Material : Stainless Steel 6. Capacity : 8 Kg (minimum) 7. Spin Speed : 1200 Rpm (minimum) 8. Power Rating: 220 /240vac, 50/60 Hz. 9. Comes With A 1 Meter (minimum) Heavy Duty Power Cord With Male Plug To Adapt Type A Outlet (or Providing 20a Plug Adapter Is An Option) 10. Smooth Surface, No Sharp Edges 11. With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 9.includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures 12.the Item Must Be Branded, Dti-bps Certified, 1 Year Warranty Parts And Service 13. With Service Centers Located In Major Cities In The Philippines. 14.the Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market.) 2 Pc White Board(white Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform. Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) Wih Plastic Corner Caps Comes With Metal Tray For Marker And Eraser The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels Overall Height From Floor: 210 To 214cm Smooth Surface, No Sharp Edges) Lot 7. Tangub City National High School (food And Beverage Services Nc Ii) Php 571,245.00 50 Pcs Chair, Dining Type : Dining Side Chair Body Shape: Square Material : Metal (round Or Square) Dimesion: Total Height - 33" X 15" X15" (minimum) Capacity: 150 Kg. Black Colored Powder Coated Frame With Foam On Seat Packed In Carton Box The Item Must Have Good Quality 4 Pcs Coffee Pot, 2 Pints Type: Manual Drip Body Shape: Round Material : Stainless Steel With Cover Capacity : 2 Pints Outside Diameter : 90 -110 Mm Over-all Height : 200 - 230 Mm Thickness : 0.5 - 1 Mm With Handle And Spout Packed In Carton Box The Item Must Have Good Quality 6 Pcs Container, Creamer Design: Type: Porcelain With Spout Body Shape: Circular Material: Porcelain Diameter : 50 - 65 Mm Height : 80 - 105 Mm Color : White Appearance : Glossy White Packed In Carton Box The Item Must Have Good Quality 24 Set Cups Ans Saucers 5-6 Oz. 1. Material : Porcelain 2. Capacity : 5 Oz./140 Ml 3. Heatproof Up To 300 Deg. C 4. Color : White 5. The Item Must Be Of Good Quality 6. Packed In Carton Box 10 Pcs Folder, Menu Type: Leather Menu Folder Body Shape: Rectangular Material: Leather With 2 Partitions And 6 Inserts Size: 31.5cm X 24.5cm Color: Brown/black Applicable Paper Size: A4 50 Pcs Fork, Cocktail 1. Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design 2. Type : Rounded Tip Handle 3. Over-all Length : 110 - 165 Mm 4. Width : 20 - 30 Mm (minimum) 5. Handle Thickness : 2 Mm To 4 Mm 6. Handle Length : 75 - 90 Mm 7. Small, 8. Color : Silver 9. The Item Must Be Branded And Have Good Quality. 50 Pcs Fork, Dessert Type : Dessert Fork Body Shape: Fork Shape, Round Tip Material/appearance : Stainless Steel, Highly Polished,with Plain Design, Rounded Tip Handle Length : 150 Mm - 175 Mmwidth : 20 - 30 Mmhandle Thickness : 1.5 Mm - 3 Mm Number Of Tines : 4 Handle : 130 Mm (minimum) Color : Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 60 Pcs Fork, Dinner Type: Dinner Fork Body Shape: Fork Shape Material / Appearance : Stainless Steel, Highly Polished, With 4 Tines Over - All Length : 120 - 175 Mm Thickness Of Handle : 2 - 3 Mm Color : Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 36 Pcs Fork, Fish Type : Fish Fork Body Shape: Fork Shape With Round Tip Material / Appearance : Stainless Steel, Highly Polished, With Plain Design Over-all Length : 180 - 215 Mm Fork Width : 1.5 Mm - 3 Mm Fork Thickness : 1 Mm - 2 Mm Number Of Tines : 4 Length Handle : 120 - 130 Mmhandle Thickness : 2 Mm - 3 Mm Color : Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 36 Pcs Fork, Oyster Type: Oyster Fork Body Shape: Fork Shape Material: Stainless Steel, With High Polish Appearance, And With Plain Design Length: 90 - 120 Mm Thickness: 1 Mm - 3 Mm Silver Color With Three Short Wide Curved Tines Packed In Plastic Pouch The Item Must Be Of Good Quality 24 Pcs Glass, Champagne Flute Type : Flute Glass Body Shape: Round Material: Clear Crystal Glass Dimension : Height: 20 -24 Cm, Top Diameter: 50 -70 Mm, Bottom Diameter: 60 - 80 Mm Capacity: 250 Ml. (minimum) Thickness: 1.5 - 3 Mm Packed In Carton Box The Item Must Have Good Quality 36 Pcs Glass, Collins Type: Tumbler Body Shape: Round Material : Clear Glass Capacity : 10 Oz To 14 Oz Thickness : 1.5 -3 Mm (minimum) Packed In Carton Box The Item Must Have Good Quality 36 Pcs Glass, Juice/hi-ball 1. Material : Clear Glass 2. Type : Hi-ball 3. Height : 140 - 160 Mm 4. Bottom Diameter : 50 -70 Mm 5. Top Diameter : 50 - 70 Mm 6. Thickness : 2 - 4 (minimum) 7. Capacity : 8 Oz. To 10 Oz. 8. Diswasher Safe 9. The Item Must Be Branded And Good Quality 10. Packed In Carton Box 36 Pcs Glass ,pilsner(ice Tea Glass) Type:falired Rim,body Shape:round Slender Bowl,material:clear Glass Capacity:20 0z To 23 Oz With Flaired Rimand Slender Shape Packed In Carton Box.the Item Must Have Good Quality. 36 Pcs Glass, Red Wine Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter : 55 - 60 Mm Thickness : 1.5 Mm - 3 Mm Over - All Length : 200 -220 Mm Capacity : 250 -300 Ml Stem Diameter : 6 - 8 Mm Stem Length : 85 - 90 Mm Base Diameter : 75 - 85 Mm Base Thickness : 2 - 4 Mm 40 Pcs Glass, White Wine Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter : 55 - 60 Mm Thickness : 1.5 - 3 Mm Over -all Length : 200 -220 Mm Capacity : 270 - 300 Ml Stem Diameter : 6 - 8 Mm Stem Length : 75 - 85 Mm Base Diameter : 70 - 80 Mm Base Thickness : 2 - 5 Mm 4 Pcs Gravy Boats Type: Steel Type Body Shape: Boat Shape With Handle Material: Stainless Steel Capacity : 5 Oz. Appearance: Mirror Polish Finish Size :17cm X 7.3cm X 8.2 Cm / 6.7 X 2.9 X 3.2 Inches (minimum) The Item Must Have Good Quality Packed In Plastic Pouch 4 Pcs Ice Bucket, 2 Liters With Tongs Type: Steel Type Body Shape: Circular Set Includes: A. Ice Bucket Material : Stainless Steel Diameter : 140 - 180 Mm Height : 140 - 170 Mm Thickness Of Bucket : 0.7 - 2 Mm Capacity : 2 Liters (minimum) The Item Must Have Good Quality 24 Pcs Knife, Butter 1. Material : Stainless Steel W/ Highly Polished Appearance 2. Over-all Length : 140 Mm - 150 Mm 3. Handle Thickness : 3 Mm - 5 Mm 4. With Dull Edge And Rounded Tip 5. The Item Must Have Good Quality. 6. Packed In Carton Box 24 Pcs Knife, Dinner Type: Dinner Knife Body Shape: Flat With Round Tip Material / Appearance : Stainless Steel Blade Highly Polished Handle Material : Stainless Steel Overall Length : 160 - 190 Mm Blade Thickness : 2 - 4 Mmhandle Thickness : 3 - 6 Mm Serrated Blade With Rounded Tip Packed In Carton Box The Item Must Have Good Quality 24 Pcs Knife, Fish Type : Fish Knife Body Shape: Flat With Pointed Tip Material / Appearance : Stainless Steel, Highly Polished W/ Plain Design Overall Length : 200 - 220 Mm Width Blade : 20 - 25 Mm Thickness Of Blade : 2 Mm - 4 Mm Thickness Of Handle: 3 Mm - 6 Mm Wide Blade, Dull Edge, Tip Made With A Notched Point Color : Silver Packed In Carton Box The Item Must Have Good Quality 20 Pcs Napkin Holder (stainless) Type: Steel Type Body Shape: Rectangular Material : Stainless Steel With Highly Polished Appearance Dimension : Width : 70 - 90 Mm X Length : 150 - 170 Mm , Thickness : 0.7 Mm -2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 20 Pcs Order Pads Type: Numbered Pads Body Shape: Rectangular Material : 80 Gsm Offset Paper Each Pad Comes With A 100 Sheets And Corresponding Copy Page Each Pad Has Sequentially Numbered Orders To Make It Easy To Keep Track With 100 Sheets Per Pad And 10 Pads Included Can Take 1000 Orders Before You Run Out Packed In A Plastic Pouch 12 Pc Pepper And Salt Mill Type: Pepper & Salt Mill Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices Preferably With A Packing Case Food Grade And Nontoxic Must Be Branded 50 Pc Plate Covers Type: Steel Type Body Shape: Circular Material: Stainless Steel, Mirror Polished Diameter: 10 1/4 Inches (minimum) Height: 2 7/8 Inches (minimum) Thickness: 1/16 Inch. (minimum) With Handle Packed In Plastic Pouch The Item Must Have Good Quality 50 Pc Plate, Dessert, 7" To 8" Type: Plain Type Body Shape: Circular Material: Porcelain Supply Must Be A Set, Consisting Of One (1) Of Each: 7 Inches And 8 Inches Plates Color : White Inner Diameter: 145 To 165 Mm Thickness : 3 To 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 60 Pc Plate, Dinner, 10" Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Color: White Inner Diameter : 200 Mm - 215 Mm Outer Diameter : 250 - 260 Mm Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 50 Pcs Plate, Fish, 8" To 9" Type: Plain Type Body Shape: Circular Material : Porcelain With No Design Supply Shall Be A Set Consisting Of: One (1) Each 8 Inches And One (1) Each, 9 Inches Color : White Inner Diameter : 165 Mm - 190 Mm (minimum) Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 10 Pcs Round Table (8's) Type: Foldable Body Shape: Round Material: High Density Polyethylene Table Top Powder Coated Steel Frame Size: 154cm X 74cm X4.5cm (minimum) Good For 8 To 10 Seater Capacity Tube Size : 28 Mm Diameter X 1 Mm Thickness Packed In A Carton Box The Item Must Have Good Quality 50 Pcs Salad Forks Type: Salad Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, With 4 Tines Length: 150 Mm - 175 Mm Thickness Of Handle : 2 Mm - 3 Mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 50 Pcs Salad Knife Type: Salad Knife Body Shape: Semi Rectangular Blade With Pointed Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Overall Length: 145 -160 Mm Blade Thickness: 2 Mm To 4 Mm Handle Thickness: 4 Mm To 6 Mm Handle Material: Stainless Steel Rounded Tip Handle Packed In Carton Box The Item Must Have Good Quality 50 Pcs Salad Plates 7" To 8" Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Supply Must Be A Set Consisting Of One (1) Each: 7 Inches And 8 Inches Plates Color: White Diameter (inner): 150 Mm - 165 Mm Thickness: 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 20 Pcs Salt And Pepper Shakers Type: Glass Type Body Shape: Square Material: Glass And Aluminum Over-all Height: 75 -90 Mm Length: 50 -60 Mm Width: 50 -60 Mm Aluminum Cover Packed In Carton Box The Item Must Have Good Quality 25 Pcs Sauce Laddles Type: Spouted Bowl Body Shape: Circular With Pouring Spout Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -230 Mm Ladle Bowl Length: 60 -65 Mm Long Ladle Bowl Diameter: 65 -70 Mm Depth: 10 -15 Mm Handle Details: 150-155 Mm Long X 20 -30 Mm Wide X 2 - 4 Mm Thick Color: Silver With Hang Hole For Hanging And Easy Access Dishwasher Safe Packed In Plastic Pouch The Item Must Have Good Quality 50 Pcs Server, Cake 1. Material : Stainless Steel Blade , Highly Polished Appearance 2. Over-all Length : 220 To 270 Mm 3. Width : 60 - 80 Mm 4. Thickness : 1.5 Mm To 2 Mm 5. Handle : 120 -140 Mm Long, Non-toxic Plastic 6. Shape : Shovel-shaped 7. Color : Silver 8. The Item Must Have Good Quality 9. Packed In Carton Box 50 Pcs Service Forks Type : Service Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, W/ Palin Design Over-all Length: 220 Mm - 260 Mm Width: 20 - 25 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm 4 Tines Color: Silver Packed In Plastic Pouch 25 Pcs Service Tray Type: Plastic Body Shape: Rectangular Material: Plastic (pp) Size : 14 Inches X 18 Inches X 1 Inch (minimum) Color : Any Packed In Plastic Pouch The Item Must Have Good Quality 25 Set Show/service/base Plates 11" To 14" Type: Plain Type Body Shape: Round Material: Porcelain With No Design Supply Must Be A Set Consisting (1) Of Each: - 11 Inches, - 12 Inches, - 13 Inches, And - 14 Inches Plates Color: White Diameter, Inner : 225 Mm - 250 Mm Thickness: 3 Mm - 6 Mm Smooth And Glossy Surfaces 50 Pcs Side Plates Or Bread Plates 6'' Type: Plain Type Body Shape: Round Material: Porcelain With No Design Color: White Inner Diameter: 95 Mm To 120 Mm Outer Diameter: 145 Mm To 170 Mm Thickness : 3 Mm - 6mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 50 Pcs Side Towels Type: Chef's Towel Body Shape: Rectangular Material: Oxford Polyester Soft Cloth Over-all Length : 640 - 680 Mm Over-all Width : 420 -460 Mm Color : Plain White Packed In Plastic Pouch The Item Must Have Good Quality 25 Pcs Silver Platter Type: Steel Type Body Shape: Round Material: Stainless Steel Diameter: 300 -330 Mm Thickness: 1 - 2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 50 Pc Soup Bowl Type: Plain With Two Handles Body Shape: Circular Material : Porcelain Capacity : 24 Oz. (minimum) Packed In Carton Box The Item Must Have Good Quality Packed In A Carton Box 25 Pc Soup Laddle Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Over-all Length : 220 -235 Mm Ladle Bowl Details : 60 -65 Mm Long, 60 -75 Mm Diameter, 10 -15 Mm Deep Handle Details : 145 - 155 Mm Long X 12 - 25 Mm Wide X 1.5 -3 Mm Thick Color : Silver With Hang Hole For Hanging And Easy Access 15 Pc Soup Tureen Type: Steel Body Shape: Round Material: Stainless Steel Capacity: 7 - 11 Quart Size : 60 X 35 X 32 Cm (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Spoon, Dinner Type : Dessert Spoon Body Shape: Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length : 175 To 190 Mm Thickness : 2 Mm - 3 Mm Shorter Handle : 120 -130 Mm Color : Silver Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Spoon, Dessert Type : Dessert Spoon Body Shape: Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length : 175 To 190 Mm Thickness : 2 Mm - 3 Mm Shorter Handle : 120 -130 Mm Color : Silver Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Spoons, Service Type : Service Spoon Body Shape: Oval Material: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 220 Mm - 250 Mm Width: 30 - 38 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm Color: Silver Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Spoons, Soup (cream And Cosume) Type: Soup Spoon Body Shape: Round Material/appearance : Stainless Steel, Highly Polished, W/ Plain Design, Rounded Tip Handle Over-all Length : 165 Mm - 200 Mm Smaller Oval Shaped Spoon Bowl And Tapers Slightly To The Tip Shorter Handle : 110 Mm - 170 Mm Thickness : 1.5 Mm - 3 Mm Color : Silver Packed In Plastic Pouch 50 Pc Steak Knife Type: Steak Knife Body Shape: Flat With Serrated Edge Material: Stainless Steel Steel Blade With Wooden Handle Length: 170 Mm To 203 Mm Handle Wood Thickness: 10 - 14 Mm With Serrated Blade Packed In Carton Box The Item Must Have Good Quality 25 Pc Sugar Container Type: Glass Type Body Shape: Round Material: Glass With Brass Lid (or Equivalent) Diameter: 70 -80 Mm Height: 130 -140 Mm Capacity: 12 Oz. Packed In Carton Box The Item Must Have Good Quality 50 Pc Table Cloth, 54 X 54 Inches Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Color: Plain White Dimension: L 54 Inches X W 54 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Table Cloth, Rectangular Type: Plain Cloth Body Shape: Rectangle Material : Linen Size : 120cm X160cm (minimum) Color : Any Color But Not Black Feature: Washable Packed In A Plastic Pouch 100 Pc Table Napkins, Cloth, 16"x16" Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Or Its Equivalent Size: L 16 Inches X W 16 Inches (minimum) Color: Plain White Packed In Plastic Pouch The Item Must Have Good Quality 80 Pcs Table Skirting Cloth 90" To 90" Type: Plain Cloth Body Shape: Square Material: American Cotton Twill Cloth Color: Any Color Except Black Dimension: 90 Inches X 90 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 50 Pcs Table, Square/rectangular (4's Or 6's) Type: Foldable Plastic Body Shape: Square/rectangle Material: High Density Polyethylene Table Top Powder Coated Steel Frame Dimension: 37 - 39 X 37 - 39 Inches Color: White Good For 4 Persons Packed In Carton Box The Item Must Have Good Quality 20 Pcs Tea Pot, 2 Pints Type: Porcelain Type Body Shape: Round With Handle And Pouring Spout Material : Porcelain Capacity : (2 Pint) Color : White Packed In Carton Box The Item Must Be Of Good Quality 50 Pcs Teaspoon Type : Tea Spoon Body Shape: Oval Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 120 Mm To 140 Mm Handle Thickness: 2 Mm To 4 Mm Short Handle Length - 100 Mm (minimum) Color: Silver Packed In Plastic Pouch The Item Must Have Good Quality 15 Pcs Tong, 8 Inches Type: Tong, 8 Inches Body Shape: Standard Material: Stainless Steel Size: 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 30 Pcs Tooth Pick Holder Type: Steel Type Body Shape: Round Material: Stainless Steel, Highly Polished In Appearance Diameter: 30 -35 Mm Diameter (minimum) Height: 65 -75 Mm Capacity: 1.24 Oz. (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 20 Pcs Tray Stand Type: Foldable Body Shape: Rectangular Material: Chrome Plated Metal Folding Tray Stand Length: 470 -490 Mm Width: 400 -440 Mm Height: 770 -790 Mm Packed In Plastic Pouch The Item Must Have Good Quality 30 Pcs Tray, Bill Folders/change 1. Material : Heavy Duty Plastic ( Abs ) Or Its Equivalent 2. Height : 190 - 220 Mm 3. Width : 120 -140 Mm 4. Thickness : 2 Mm To 3 Mm (minimum) 5. Color : Black 6. With Check And Pen Holder 7. The Item Must Have Good Quality 8. Packed In Plastic Pouch 20 Pcs Tray, Round (bar) Type: Plastic Body Shape: Round Material: ( Pe/abs) Plastic Rubberized Surface, Non-slip/grip Tight Over-all Diameter: 345 -360 Mm (minimum) Thickness: 2 - 4 Mm (minimum) Color: Black Packed In Plastic Pouch The Item Must Have Good Quality 50 Pcs Water Goblet Type: Water Goblet Body Shape: Balloon-shaped Bowl Material: Crystal Clear Glass Over-all Length: 200 -220 Mm Capacity: 270 Ml To 300 Ml Rim Diameter - 55 -65 Mm Thickness: 1 Mm To 3 Mm Stem Length : 75 -85 Mm Stem Diameter : 6 -8 Mm Base Thickness : 3 -4 Mm Base Diameter : 7 -80 Mm Packed In Carton Box The Item Must Have Good Quality 30 Pcs Water Pitcher (stainless) Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Height: 170 Mm To 220 Mm Top Diameter: 110 -120 Mm (approximate) Capacity: 1 - 1.5 Liter With Pour Spout Dishwasher Safe Packed In Plastic Pouch The Item Must Have Good Quality Lot 8. Tangub City National High School (front Office Services And Local Guiding Services) Php 232,832.00 50 Pcs Calculator Type: Simple Calculator, Non Scientific Body Material: Hard Plastic Minimum Size: 110mm Width X 140mm Long Lcd Display: At Least Font Size Is 8mm X 5mm With Dual Power; Solar Cell And Battery With At Least 8 Digits Display Includes Spare Battery Packed With Protective Carton Box User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions C. Operating Procedures On How To Use The Equipment, 1 Pcs Cart, Bell Boy Type:hotel Luggage Trolley Capacity: At Least 450 Kilograms Minimum Dimensions: Length - 1000mm X Width - 600mm X Height - 1700mm Frame Material: Stainless Steel Tubing Stainless Tube Diameter: At Least 35mm Black Powder Coated Steel Platform With Carpeted Surface And Rubber Bumper At The Edge With 4 Pieces X 200mm Diameter Black Pneumatic Swivel Wheels Packed With Shipping Carton Box Branded 1 Pcs Cash Register With Drawer Printer: Width: 57mm (minimum) Speed: 2 Lines/sec (minimum) Lcd Display Size: 5cm Width X 10cm Long(minimum) With Drawer At Least 4 Bills And 5 Coins Compartments With Drawer Dimension At Least 410mm Width X 450mm Depth Input Method: Numeric 10-key Interface With At Least 2 Ports Power Source: 220-240volts Ac, 50/60hz; With Ac/dc Adapter Can Be Operated With Battery Programmable User's Manual In English Which Includes: A. Parts Manual With Labels, 1 Pcs Credit Card Imprinter Height Of The Imprinter 2 1/2 Inch (minimum) X Width 5 1/2 Inch (minimum) X Length 11 Inches (minimum) Carriage Material: Steel Body:plastic Color: Black 20 Characters Per Line Card Mounting Can Accepts At Least 0.030" Thick Size Credit Cards Plate Can Accommodate Up To 5 Lines, Manual Type With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures 30 Pc Credit Card Voucher Holder Material: 3 Mm Thick Clear, Acrylic, Dimensions: Height: At Least 255 Mm, Width: At Least 210 Mm, Thickness: At Least 70 Mm 1 Pcs Detector, Fake Bills Led Display; Led Display Size: At Least 5 Cm Width X 10 Cm Long; Hard Plastic Casing; Ultraviolet (uv) And Magnetic (mg) Sensors; Power Source: Built In Rechargeable Battery,12v Output And Ac 100- 240v Adapter; With Complete Detection; Accessories Includes: Tough Plastic Carrying Case, Power Cord, Cleaning Brush, And Power Charger; User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, 3 Pcs Guest Folio Rack Material: Hard Plastic; Accommodates At Least 50 Room Divider Indexes; With Divider Boards With Metal Tabs; A4 Size Divider; With Metal Sidings 1 Pc Hypercom Memory: 1 Mb Ram (minimum) Lcd Display; 160 X 80 Pixel Graphics (minimum) With Card Reader Magnetic Stripe Pin Pad Port: 4-wire, Rs485; With Peripheral Ports For Pc Connection; Electronic Cash Register Or Journal Printer; With At Least 2400bps Modem; Support Synchronous (sdlc) And Asynchronous, Lan Operation; With Pin Encryption; With Thermal Printer At Least 576 Dots Per Line; Thermal Paper – 2 Inches Wide X 3 Inches Roll Diameter (min.); Keypad: Membrane, 12 Keys, Water-resistant; 1 Pc Key Card Maker With Verifier Set Of Hotel Door Lock System With Management Software; A) 1 Unit - Card Type Door Lock With Inductive Distance At Least 4cm B) 1 Unit - Card Encoder Unit With 25 Pieces Door Room Key Cards Computer Software System For Door Lock And Making Cards With Complete Accessories Including The Usb Type A Cable Interface To The Computer User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions C. Operating Procedures On How To Use The Equipment 1 Pcs Key Rack Rack Material: Wood Number Of Racks: Can Accommodate At Least 40 Key Cards Minimum Rack Size: 70mm Width X 110mm Height Depth Of The Rack At Least 50mm Any Color Paint Type:wall Mounted Rack Pack With Shipping Carton Box 1 Pc Safety Deposit Box Vault Material: Metal, Powder Coated, Solid Steel Door Thickness: 4mm(minimum) Body Thickness: 2mm(minimum) Minimum Outer Dimension: L: 30cm X H: 20cm X W: 20cm Electronic Lock System Battery Operated Digital Panel: Requires 4 X ‘aa’ Batteries User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures On How To Use The Equipment, Branded 20 Pcs Speaker, Lapel Frequency At Least 500mhz With Audio Input Connector With Operation Range At Least 50meters Receiver/70ma Earphone Output Level: 32ohm, 65mw Operates With Energizer Battery With Minimum Powerconsumption Of Transmitter At Least 3v/70ma Receiver: 3v/70ma 25 Sets First Aid Kit Type: Emergency Case; Contents: First Aid Quick Reference Guide, 1pc; Sterize Gauge Swab(4 X4 X12 Ply) 100 Pcs/pack, 1 Pack; Adhesive Strips/band -aid, 50 Pcs/pack, 2 Packs; Gloves, Disposable, Medium Size, 2 Pairs; Hypo Allergenic Adhesive Tape, 5cm X 5cm, 2 Rolls; Triangular Bandage/arm Sling, Min 90cm X 90cmx 120cm, 2pcs; Safety Pins, 1 1/4 Inches, (12 Pcs), 1 3/4 Inches (12 Pcs); Stainless Steel Bandage Scissors, 2pcs; Betadine, 60ml, 2 -3 Years Expiration, 2 Bottles; Dust Mask, 2pcs; Hand Towels Or Face Towels, White Color, 6 Pcs; Gauze Bandage, Minimum 5cm X 4cm, 2 Rolls; Antiseptic Handwash/germicidal Soap, 60 Gms , 2pcs; Torniquet, 2 Pcs; Spirit Of Ammonia, 30ml, 2-3 Years Expiration, 1 Bottle; Burn Cream Ointment, 20g To 30g, 2- 3years Expiration, 1 Tube; Medical Tweezers Min. 8cm, Plastic, 2pcs; Plastic Bags, Resealable, Minimum Of 24pcs, 100mm X 180mm, 24pcs, 150mm X 230mm Cotton Balls , 50 Balls In A Sealed Package, 2 Packs Hot And Cold Pack, Reuseable, 1 Pack Water Resistant And Sturdy Case W/ Handle That Can Accommodate All The Listed Items. 4 Pcs Megaphone Battery Operated (4 Pcs - Size D Battery) With Built-in Siren Power Output: 20-watts (minimum) Range: 700 Meters (minimum) With Hand Grip And Carrying Strap Branded With Users Manual That Contains The Specification, List Of Parts, Instruction Guide, Troubleshooting, Safety Instruction. 100 Pcs Whistle Anodized Aluminum;size : Length - 6.5cm X 3cm Diameter; Handy And Lightweight; Loud Whistle Can Be Heard For Far Distance Of 100 Meters; With Key Ring For Attachment 2 Pcs White Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform.board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) Wih Plastic Corner Capscomes With Metal Tray For Marker And Eraserthe Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobblewith 4 Lockable Hard Plastic Caster Wheelsoverall Height From Floor: 210 To 214cmsmooth Surface, No Sharp Edges Total Abc 3,978,106.00 2. The Department Of Education – Division Of Tangub City Now Invites Bids For The Above Procurement Project. Procurement Of Learning Tools And Equipment For Technical Vocational Livelihood To Deped-public Schools. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From Department Of Education – Division Of Tangub City And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. To 5:00 P.m. , Mondays To Fridays Except Holidays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 14, 2024 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of: Lot 1 - Five Hundred Pesos (p500.00) Lot 2 - Five Hundred Pesos (p500.00) Lot 3 - Five Hundred Pesos (p500.00) Lot 4 – One Thousand Pesos (p1,000.00) Lot 5 - Five Thousand Pesos (p5,000.00) Lot 6 - Five Hundred Pesos (p500.00) Lot 7 – One Thousand Pesos (p1,000.00) Lot 8 - Five Hundred Pesos (p500.00) The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees To Be Presented In Person. 6. The Department Of Education – Division Of Tangub City Will Hold A Pre-bid Conference On November 21, 2024, 9:00 Am At Division Office Conference Hall Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before 9:00 A.m. On December 3, 2024. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be December 3, 2024, 9:00 A.m. At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Bidders Or Its Authorized Representatives Are Encouraged To Attend The Pre-bid Conference To Ensure That They Fully Understand The Procuring Entity’s Requirements. 11. The Department Of Education – Division Of Tangub City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Gina L. Mandawe Head, Bac Secretariat Deped, Division Of Tangub City, Anecito Siete St., Mantic, Tangub City 7214 (088) 530-5988 Depedtangub.bacsec@deped.gov.ph Https://tangub.deped.gov.ph/ 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Https://tangub.deped.gov.ph/ Erlinda G. Dael, Phd., Cese Assistant Schools Division Superintendent Bac Chair

Details: Attachment 1: Combined Synopsis-solicitation For Commercial Products And Commercial Services effective Date: 03/15/2023 revision: 01 description this Is A Combined Synopsis/solicitation For Commercial Products And Commercial Services Prepared In Accordance With The Format In Federal Acquisition Regulation (far) Subpart 12.6, Streamlined Procedures For Evaluation And Solicitation For Commercial Products And Commercial Services, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested, And A Written Solicitation Document Will Not Be Issued. this Solicitation Is Issued As A Small Business Set Aside Request For Quotes (rfq). The Solicitation Number Is 36c25024q1006. The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2024-06. the Associated North American Industrial Classification System (naics) Code For This Procurement Is 334111, With A Small Business Size Standard Of 1,250 Employees. The Fsc/psc Is Da10. the Department Of Veterans Affairs, Cincinnati Va Medical Center (cvamc) Located At 3200 Vine Street, Cincinnati, Oh 45220-2213 Is Seeking To Purchase The Brand Name Scriptpro Pharmacy Workflow Management System (wms). all Interested Companies Shall Provide Quotations For The Following: supplies/services line Item description quantity unit Of Measure unit Price total Price 1 remote Access Server For Wms Inbound Access To Wms Software For Up To Five (5) Sessons 1 each 2 ras Device License Package Workflow Management System Ras Device License Package (5 Devices) 2 each 3 endpoint Security (per Server/client Computer) Endpoint Security (per Server Computer, Hci Vm, Client Computer) 1 each 4 monthly Support 12 job total the Requested Brand Name Wms Software Must Provide The Capabilities Outlined In The Statement Of Work. statement Of Work description Of Service: Scriptpro Remote Access Server background: The Cincinnati Va Medical Center S (cvamc) Pharmacy Service Relies On The Scriptpro Robotic Prescription Fill Machine To Physically Count, Bottle And Label The Prescriptions Dispensed To All Outpatients Seen In The Clinics And To The Patients Housed On Campus In Our Domiciliary Programs. The System Consists Of 3 Fill Robots Connected Through A Server To Fill And Check Stations Used By The Staff To Verify The Prescription And To Dispense It To The Patient At The Pick-up Window. The System Interfaces With Vista And Sends The Fill Information To The Va Computer System. This System Is In Use In Many Va Pharmacies And Has Been In Use At The Cincinnati Vamc S Pharmacy Since 2000. The System Is Designed So That All Robots, Hardware And Software Can Be Upgraded When Necessary. objective: Procure Remote Access Server Required To Run And Print Scriptpro Reports From Standard Va-issued Laptops. This Will Allow Real-time Tracking Of Key Performance And Patient Measures Such As Items In Out-of-stock Queue, Number Of Prescriptions In Pending Queue, And Other Day To Day Functions. This Remote Access Should Improve Efficiencies With All Levels Of Outpatient Prescription Filling. scope Of Work: Scriptpro Remote Access Will Be Installed As Accessible Software For Specific Number Of Licensed Users. Remote Access Server Provides Users A Quick And Easy Way To Access Scriptpro S Workflow Management And Pharmacy Management Systems From A Non-scriptpro Computer. Users Initiate A Secure Session To The Remote Access Server By Launching A Remote Desktop Protocol (rdp) Session From A Non-scriptpro Computer. The Secure Session Provides Access To Many Of The Scriptpro System Features That Are Available From An Sp Datapoint. Prescription Status Inquiries, Processing Exceptions Management, Pharmacy Reporting, Remote Inspection, And Access To Other Important Operational Data Are All Possible Via Remote Access Server. Includes Five (5) Remote Access Sessions. Additional Remote Access Sessions (in Groups Of Five) Available For Additional Fee. Maximum Of 15 Sessions Supported. term Of Contract And Pricing: The Va Anticipates The Award Of A Single Contract On A Firm, Fixed-price, Indefinite Delivery, Indefinite Quantity Basis From This Solicitation. The Solicitation Will Be Conducted In Accordance With Far 12 And 15. Pricing Should Be Quoted By Gs Schedule And Subject To The Availability Of Va Funds. hours Of Operation: Not Applicable. image And Data Transmission Security: system Connectivity. The Contractor Shall Provide And Maintain The Means For Enabling And Maintaining System Connectivity. All Required/supporting Documentation Including, But Not Limited To Memorandum Of Understanding And Interconnected Security Agreement Shall Be Completed With Appropriate Signatures And Shall Be Updated As Changes Occur. the Contractor Shall Maintain External Communication Systems Required For Secure, Va-compliant Image And Data Delivery To Its Pharmacists And Shall Configure, Install And Maintain The Purchased Software. Routine Preventative Maintenance Inspections Shall Be The Responsibility Of The Contractor. The Contractor Shall Expeditiously Provide All Requested Information To Cvamc S Information Security Officers (iso), Chief Information Manager And The Cor Before The Contractor Is Able To Provide Service. the Contractor Shall Comply With All Va Information Security Requirements Including Initial And Annual Security Awareness Training, Background Checks And Using Equipment That Meets Va Security Standards. The Contractor Shall Conform To All Rules Of Behavior Set Forth By The Office Of Cyber & Information Security (ocis). In Order To Have Remove Access, Contractor Shall Apply For And Install The One-va Vpn. The Contractor Shall Apply For Network Access And Sign Rules Of Behavior/security Agreement. Note: Microsoft Windows (currently Edition) Is The Government S Operating System. cvamc Shall Provide A Firewall And Antivirus Software (for Va Protection Only) To The Connection If Needed. If A Firewall Or Antivirus Software Is Needed For The Contractor Side, They Will Be The Responsibility Of The Contractor. the Contractor Shall Provide E-mail Address And A Telephone Number(s) And Contract Person(s) To Be Used By Cvamc For Inquiries And Problem Solving At All Times Via 24-hour, 7-day/week Number. the Contractor Shall Secure And Maintain The Communications Link Between The Contractor S Facility And The Va Facilities At The Contractor S Expense. due To The Confidential Nature Of The Patient Information, Services That Are Completed Within The Contractor S Office Or Home Facilities (if The Contractor Provides Services From The Home) Shall Employ A Security System Adequate To Maintain Confidentiality. the Connectivity/functionality Should Be Approved And Verified By The Va Prior To Acceptance. The Contractor Shall Be Responsible For Any Costs Associated With Connectivity To A Va System, To Include Configuring The System For Connectivity To The Va And/or Any Costs Incurred On The Contractor S Side. security Requirements For Contractor Employees: the Contractor(s) Shall Insure The Confidentiality Of All Patient And Employee Information And Shall Be Held Liable In The Event Of Breach Of Confidentiality According To Federal Regulations Contained In Hippa. Any Person Who Knowingly Or Willingly Discloses Confidential Information From The Va Medical Centers May Be Subject To Fines Of Up To $50,000 And May Be Subjected To Civil Litigation From The Patient(s). the Contractor Shall Be Compliant With Va Handbook 6500, Information Security Program. the Contractor Shall Maintain A Drug-free Workplace In Accordance With Federal Regulations. The Contractor Shall Establish And Maintain A Drug-free Workplace Program. The Administration Of This Program As Well As The Establishment Of Commensurate Disciplinary Action Will Be The Responsibility Of The Contractor. all Costs Associated With Obtaining Clearances For Contractor(s) Provided Personnel Shall Be The Responsibility Of The Contractor(s). Further, The Contractor(s) Shall B Responsibly For The Actions Of Those Individuals They Provide To Perform Work For The Va Under This Contract. In The Event That Damages Arise From Work Performed By The Contractor(s) Provided Personnel, Under The Auspices Of This Contract, The Contractor(s) Shall Be Responsible For All Resources Necessary To Remedy The Incident. information Management: system Of Records: The Veterans Affairs System(s) Of Records To Which The Contractor(s) Personnel Will Have Access In Order To Maintain Is Patient Medical Records Va (24va136). system Security: The Contractor(s) Shall Provide Va With The Full Assurance That Security Measures Have Been Implemented Which Are Consistent With Omb Circular A-130 And Va Departmental Standards. confidentiality Of Patient Records: The Contractor Is A Va Contractor And Will Assist In The Provision Of Health Care To Patients Seeking Such Care For Or Through The Va. As Such, The Contractor Is Considered Part Of The Department Of Health Care Activity. The Contractor Is Considered To Be A Va Contractor For Purposes Of The Privacy Act, Title 5 U.s.c. 552a. Further, For The Purpose Of Va Records Access And Patient Confidentiality, The Contractor Is Considered To Be A Va Contractor For The Following Provisions: Title 38 U.s.c. 5701, 5705, And 7362. Therefore, The Contractor May Have Access, As Would Other Appropriate Components Of Va, To Patient Medical Records, Including Patient Treatment Records Pertaining To Drug And Alcohol Abuse, Hiv And Sickle Cell Anemia, To The Extent Necessary To Perform Its Contractual Responsibilities. However, Like Other Components Of The Department, And Not Withstanding Any Other Provisions Of The Contract, The Contractor Is Restricted From Making A Disclosure Of Va Records, Or Information Contained In Such Records, To Which It May Have Access, Except To The Extent That Explicit Disclosure Authority From Va Has Been Received. The Contractor Is Subject To The Same Penalties And Liabilities For Unauthorized Disclosures Of Such Records As Va. The Records Referred To Above Shall Be, And Remain, The Property Of The Va And Shall Not Be Removed Or Transferred From Va Except In Accordance With U.s.c. 551a (privacy Act), 38 U.s.c. 5701 (confidentiality Of Claimants Records), 5 U.s.c. 552 (foia), 38 U.s.c 5705 (confidentiality Of Medical Quality Assurance Records), 38 U.s.c. 7332 (confidentiality Of Certain Medical Records) And Federal Laws, Rules And Regulations. Subject To Applicable Federal Confidentiality Or Privacy Laws, The Contractor, Or Their Designated Representatives, And Designated Representatives Of Federal Regulatory Agencies Having Jurisdiction Over Contractor, May Have Access To The Va S Records, At The Va S Place Of Business On Request During Normal Business Hours, To Inspect And Review And Make Copies Of Such Records. In Addition, The Following Policies And Laws Are Applicable Under This Contract: Computer Security Act Of 1987, Pl 100-235 Privacy Act Of 1974, 5 U.s.c. 552a Healthcare Insurance Portability And Accountability Act Of 1996 (hippa) fraud And Related Activity In Connection With Access Devices And Computers, 18 U.s.c. 1029-1030 Electronic Communications Privacy Act Of 1986, Pl 99-508 U.s.c. 3301, Confidential Nature Of Claims U.s.c. 3305, Confidentiality Of Medical Quality Assurance Records U. S. C 4132, Confidentiality Of Certain Medical Records 8.4 The Contractor Shall Comply With Cvamc Computer And End User Security Requirements: Access Only Data For Which The Contractor Has Authorized Privileges. Maintain Confidentiality Of Sensitive Data Or Information. Protect Any Assigned User Id S, Passwords, Electronic Signatures And Other Access Key From Disclosure. Secure Sensitive Printed Information In Approved Storage Containers When Not In Use. Practice Good Housekeeping With Equipment And Work Areas. Log Off Systems Before Leaving A Computer Unattended. Refrain From The Illegal Reproduction Or Use Of Copyrighted And Licensed Software. Utilize The Data Only To The Need Necessary To Perform The Requirements Of This Contract. the Contractor Understands And Agrees That The Medical Records Of A Patient And Radiology Reports Generated Are Strictly Confidential. Each Person Assigned To This Contract Shall Be Required To Sign A Confidentiality Statement. Each Person Allowed Access To The Vista System Shall Sign An Automated Information Security Agreement Annually. health Insurance Portability And Accountability (hipaa). In Accordance With 45 Cfr 164.5029e), The Privacy Rule Includes Exception To The Business Associate Agreement In Order For Covered Entity To Disclose Protected Health Information To: A Health Care Provider For Treatment. Based On This Exception, A Business Associate Agreement Is Not Required For This Contract. the Contractor Shall Maintain An Errors And Omissions Liability Insurance Policy Which Insures Against A Negligent Act, Error Or Omission And The Oral Or Written Publication Of Material That Violated A Person S Rights Of Privacy. The Contractor Shall Also Maintain A Commercial General Liability Policy. Evidence Of Coverage Shall Be Provided To The Va Credentialing Department Upon Request. in Accordance With The Health Insurance Portability And Accountability Act (hipaa) And The Balanced Budget Act (bba) Of 1977, The Office Of Inspector General (oig) Has Established A List Of Parties And Entities Excluded From Federal Health Care Programs. Specifically, The Listed Parties And Entities On The Oig List Of Excluded Individuals/entities May Not Receive Federal Health Care Program Payments Due To Fraud And/or Abuse Of The Medicare And Medicaid Programs. therefore, All Offerors Shall Review The Oig List Of Excluded Individuals/entities On The Oig Web Site At Www.hhs.gov/oig To Ensure That The Proposed Candidate(s) And/or Firm(s) Are Not Listed. Offerors Should Note That Any Excluded Individual Or Entity That Submits A Claim For Reimbursement To A Federal Health Care Program, Or Causes Such A Claim To Be Submitted, May Be Subject To A Civil Monetary Penalty (cmp) Of $10,000 For Each Item Or Service Furnished During A Period That The Person Or Entity Was Excluded An May Also Be Subject To Treble Damages For The Amount Claimed For Each Item Or Service. Cmp S May Also Be Imposed Against Health Care Providers And Entities That Employ Or Enter Into Contracts With Excluded Individuals Or Entities To Provide Items Or Service To Federal Program Beneficiaries. by Signing The Offer/bid, The Contractor Certifies That He/she Has Reviewed The Oig List Of Excluded Individuals/entities And That The Proposed Candidate(s) And/or Firm Are Not Listed As Of The Date The Offer/bid Was Signed. Maintenance And Technical Support: Provide Maintenance On All Contractor-provided Equipment And Installed Systems. Contractor Shall Make Provisions For The Proper Maintenance And Functioning Of Associated Equipment, Facilities And Fixtures As May Reasonably Be Required By Pharmacists To Perform Services Hereunder. Provide After-hours Support For Problems With Call-pack Periods Not To Exceed 30 Minutes From The Placement Of A Call For Assistance. uptime: Provide A System That Maintains At Least A 99% Uptime Performance Rate. Va Personnel Shall Be Notified Immediately Of Any Equipment Malfunction That Would Hinder The Transmission Of Images Or Other Data. In The Event Of A System Failure, Contractor Shall Work Cooperatively With The Va Facility To Remedy The Situation As Quickly As Possible. The Contractor May Contact The Cvamc S Cio During Normal Business Hours At 610-384-7711 X 4555 Or The Aod At 610-384-7711 X5060 Or 4290 On Evenings/holidays/weekends. planning And Installation: contractor Shall Develop A Project Implementation Strategy With Cvamc To Include The Preparation Of Buildings, Establishing Telecommunications Etc. If Necessary the Service Provider Shall Be Required To Utilize A Point-to-point Vpn Between Themselves And Cvamc If Necessary To Dial Into The System For Diagnostic Or Upgrade Purposes. All Security Requirements Need To Be Met. contractor Shall Provide A System That Maintains A Minimum Of 99% Up Time Performance Rate. Failure To Provide This Shall Result In A Deduction On The Contract By 1/30th For Each Day Down And Possibly Contract Termination. contractor Shall Provide Hardware Necessary To Connect Remotely To Cvamc To Be Utilized At The Contractor Site. contractor Shall Provide Facsimile, Telephone, Computer/laptops, Networking And Other Telecommunication Equipment To Be Utilized At The Contractor Facility. contractor Shall Provide Al Supplies, Services, Maintenance, Repairs And Upgrades Required At Contractor Facility To Provide Services As Described Above. contractor S Equipment, Hardware, Software And Supplies Shall Be Compatible With The Va S Software And Hardware Used During Performance Of This Contract, Including Critical Patches And Antivirus Updates. Contractor Shall Provide Proof Of Installation Of Critical Patches And/or Antivirus Updates To The Va Upon Request. contractor S Network And Security System Shall Be Compatible With The Va S Network And Security System. contractor Shall Use Any Va Furnished Items In Conjunction With, And Exclusively For, Performance Under This Contract. 12.1 After Award Of Contract, All Inquiries And Correspondence Relative To The Administration Of The Contract Shall Be Addressed To: Contracting Officer (co) (end Of Sow) the Full Text Of Far Provisions Or Clauses May Be Accessed Electronically At Http://acquisition.gov/comp/far/index.html. the Following Solicitation Provisions Apply To This Acquisition: far 52.203-17, Contractor Employee Whistleblower Rights (nov 2023) far 52.204-13, System For Award Management Maintenance (oct 2018) far 52.204-27, Prohibition On A Bytedance Covered Application (jun 2023) far 52.212-1, Instructions To Offerors Commercial Products And Commercial Services (sep 2023) addendum To Far 52.212-1 Instructions To Offerors Commercial Products And Commercial Services (nov 2021) provisions That Are Incorporated By Reference (by Citation Number, Title, And Date), Have The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. The Version Of Far 52.212-1 In The Addendum Is Tailored For Simplified Acquisition Procedures And Supersedes The Current Version Of Far 52.212-1 Contained In The Far. the Following Provision Is Incorporated Into 52.212-1 As An Addendum To This Solicitation: far 52.212-1 Instructions To Offerors Commercial Products And Commercial Services (nov 2021) (a)â north American Industry Classification System (naics) Code And Small Business Size Standard.â the Naics Code(s) And Small Business Size Standard(s) For Thisâ acquisitionâ appear Elsewhere In Theâ request For Quote (rfq). However, The Small Business Size Standard For A Concern That Submits Aâ quote, Other Than On Aâ constructionâ or Serviceâ acquisition, But Proposes To Furnish An End Item That It Did Not Itself Manufacture, Process, Or Produce Is 500 Employees If Theâ acquisition is Set Aside For Small Business And Has A Value Above Theâ simplified Acquisition Threshold; Or uses Theâ hubzoneâ price Evaluation Preference Regardless Of Dollar Value, Unless Theâ quoterâ waives The Price Evaluation Preference; Or is An 8(a),â hubzone, Service-disabled Veteran-owned, Economically Disadvantaged Women-owned, Or Women-owned Small Business Set-aside Or Sole-source Award Regardless Of Dollar Value. (b)â submission Ofâ quotes. Submit Signed And Datedâ quotesâ to The Office Specified In Thisâ request For Quote (rfq) At Or Before The Exact Time Specified.â quotesâ mayâ be Submitted On Letterhead Stationery, Or As Otherwise Specified In Theâ rfq. As A Minimum,â quotesâ mustâ show â â â â â â â â â â â (1)â theâ solicitation Number; â â â â â â â â â â â (2)â the Time Specified In Theâ solicitationâ for Receipt Ofâ quotations;â  â â â â â â â â â â (3)â the Name, Address, And Telephone Number Of Theâ quoter; a Technical Description Of The Items Being Quoted In Sufficient Detail To Evaluate Compliance With The Requirements In Theâ solicitation. Thisâ mayâ include Product Literature, Or Other Documents, If Necessary; â â â â â â â â â â â (5)â terms Of Any Expressâ warranty; â â â â â â â â â â â (6)â price And Any Discount Terms; â â â â â â â â â â â (7)â "remit To" Address, If Different Than Mailing Address; (8)â a Completed Copy Of The Representations And Certifications At Federalâ acquisitionâ regulation (far)â 52.212-3â (see Farâ 52.212-3(b) For Those Representations And Certifications That Theâ quoterâ shallâ complete Electronically); â â â â â â â â â â â (9)â acknowledgment Request For Quotation Amendments; (10)â past Performanceâ will Not Be Considered In Simplified Acquisition Procurements. (11)â quote Should Include A Statement Specifying The Extent Of Agreement With All Terms, Conditions, And Provisions Included In Theâ solicitation.â quotesâ that Fail To Furnish Required Representations And Certifications, Information Requested In (1) To (9) And Accept The Terms And Conditions Of Theâ solicitationâ mayâ be Excluded From Consideration. (c)â period For Acceptance Ofâ quotes. Theâ quoterâ agrees To Hold The Prices In Itsâ quoteâ firm For 30 Calendar Days From The Date Specified For Receipt Ofâ quotes Unless Another Time Period Is Specified In An Addendum To Theâ solicitation. (d)â product Samples. When Required By Theâ solicitation, Product Samplesâ shallâ be Submitted At Or Prior To The Time Specified For Receipt Ofâ quotes. Unless Otherwise Specified In Thisâ solicitation, These Samplesâ shallâ be Submitted At No Expense To The Government, And Returned At The Sender S Request And Expense, Unless They Are Destroyed During Testing. (e)â multipleâ quotes.â quotersâ are Encouraged To Submit Multipleâ quotesâ presenting Alternativeâ line Itemsâ (provided That The Alternativeâ line Itemsâ are Consistent With Farâ subpartâ  4.10), Or Alternativeâ commercial Productsâ orâ commercial Servicesâ for Satisfying The Requirements Of Thisâ solicitation. Eachâ quoteâ submitted Will Be Evaluated Separately. (f)â late Submissions, Revisions, And Withdrawals Ofâ quotes. (1)â quotersâ are Responsible For Submittingâ quotes So As To Reach The Government Office Designated In Theâ solicitationâ by The Time Specified In Theâ solicitation. If No Time Is Specified In Theâ solicitation, The Time For Receipt Is 4:30 P.m., Local Time, For The Designated Government Office On The Date Thatâ quotesâ are Due. (2)â anyâ quotation Received At The Government Office Designated In Theâ solicitationâ after The Exact Time Specified For Receipt Ofâ quotesâ is "late" And May Not Be Considered Unless It Is Received Before Purchase Order Issuance And Theâ contracting Officerâ (co) Determines That Accepting The Lateâ quotationâ would Not Unduly Delay Theâ acquisition. (3)â if Anâ emergencyâ or Unanticipated Event Interrupts Normal Government Processes So Thatâ quotations Cannot Be Received At The Government Office Designated For Receipt Ofâ quotesâ by The Exact Time Specified In Theâ solicitation, And Urgent Government Requirements Preclude A Notice Of An Extension Of The Closing Date, The Time Specified For Receipt Ofâ quotes Will Be Deemed To Be Extended To The Same Time Ofâ dayâ specified In Theâ solicitationâ on The First Workâ dayâ on Which Normal Government Processes Resume. (g)â issuance Of Purchase Order. The Government May Issue A Purchase Order To One Or More Quoters As Identified In The Request For Quote (rfq). Therefore, Theâ quoter S Initialâ quoteâ shouldâ contain Theâ best Terms From A Price And Technical Standpoint. However, The Governmentâ mayâ reject Any Or Allâ quotesâ if Such Action Is In The Public S Best Interest. The Contracting Officer (co) May Issue A Purchase Order To Other Than The Quoter With The Lowest Priced Quotation. (h)â multiple Awards. The Governmentâ mayâ issue A Purchase Order For Any Item Or Group Of Items Of A Quotation, Unless Theâ quoterâ qualifies Theâ quotation By Specific Limitations. Unless Otherwise Provided In The Schedule,â quotationsâ mayâ not Be Submitted For Quantities Less Than Those Specified. The Government Reserves The Right To Issue A Purchase Order For A Quantity Less Than The Quantity Quoted, At The Unit Prices Quoted, Unless Theâ quoterâ specifies Otherwise In Theâ quotation. â â â â â â (1)â availability Of Requirements Documents Cited In Theâ solicitation. (i)â the Gsa Index Of Federal Specifications, Standards And Commercial Item Descriptions, Fpmr Part 101-29, And Copies Of Specifications, Standards, And Commercial Item Descriptions Cited In Thisâ solicitationâ mayâ be Obtained For A Fee By Submitting A Request To- Gsa Federal Supply Service Specifications Section Suite 8100 470 East L Enfant Plaza, Sw Washington, Dc 20407 Telephone (202) 619-8925, Facsimile (202) 619-8978. (j)â unique Entity Identifier (uei). Applies To All Quotesâ that Exceed Theâ micro-purchase Threshold, Andâ quotesâ at Or Below Theâ micro-purchase Thresholdâ if Theâ solicitationâ requires The Contractor To Beâ registered In The System For Award Management (sam).) Theâ quoterâ mustâ enter, In The Block With Its Name And Address On The Cover Page Of Itsâ quote, The Annotation "unique Entity Identifier" Followed By Theâ unique Entity Identifierâ that Identifies Theâ quoters Name And Address. Theâ quoterâ alsoâ must Enter Itsâ electronic Funds Transfer (eft) Indicator, If Applicable. The Eft Indicator Is A Four-character Suffix To Theâ uei. The Suffix Is Assigned At The Discretion Of Theâ quoterâ to Establish Additional Sam Records For Identifying Alternative Eft Accounts (see Farâ subpartâ  32.11) For The Same Entity. If Theâ quoterâ does Not Have A Uei, Itâ shouldâ contact The Entity Designated Atâ www.sam.govâ forâ ueiâ establishment Directly To Obtain One. Theâ quoterâ shouldâ indicate That It Is Aâ quoterâ for A Government Contract When Contacting The Entity Designated Atâ www.sam.govâ for Establishing Theâ uei. (k)â [reserved] (l)â requests For Information. The Co Will Not Notify Unsuccessful Quoters That Responded To This Request For Quotation (rfq). However, Quoters May Request Information On Purchase Order(s) Resulting From This Solicitation With The Co. (end Of Provision) far 52.212-3, Offerors Representations And Certifications Commercial Products And Commercial Services (may 2024) offerors Must Complete Annual Representations And Certifications Electronically Via The System For Award Management (sam) Website Located At Https://www.sam.gov/portal In Accordance With Far 52.212-3, Offerors Representations And Certifications Commercial Products And Commercial Services. If Paragraph (j) Of The Provision Is Applicable, A Written Submission Is Required. Far 52.212-4, Contract Terms And Conditions Commercial Products And Commercial Services (nov 2023) far 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders Commercial Products And Commercial Services (may 2024) far 52.225-1, Buy American Supplies (oct 2022) vaar 852.212-71, Grey Market And Counterfeit Items (feb 2023) vaar 852.212-72, Grey Market And Counterfeit Items Information Technology Maintenance Allowing Other-than-new-parts (feb 2023) Vaar 852.219-76, Va Notice Of Limitations On Subcontracting Certificate Of Compliance For Supplies And Products (nov 2022) 852.219-76â va Notice Of Limitations On Subcontracting - Certificate Of Compliance For Supplies And Products. as Prescribed In 819.7011(c), Insert The Following Clause. The Contracting Officer Shall Tailor The Clause In Paragraph (a)(2)(iii) As Appropriate: va Notice Of Limitations On Subcontracting - Certificate Of Compliance For Supplies And Products (nov 2022) (a) Pursuant To 38 U.s.c. 8127(k)(2), The Offeror Certifies That - (1) If Awarded A Contract (see Far 2.101 Definition), It Will Comply With The Limitations On Subcontracting Requirement As Provided In The Solicitation And The Resultant Contract, As Follows: [offeror Check The Appropriate Box] (i) In The Case Of A Contract For Supplies Or Products (other Than From A Non-manufacturer Of Such Supplies), It Will Not Pay More Than 50% Of The Amount Paid By The Government To It To Firms That Are Not Vip-listed Sdvosbs As Set Forth In 852.219-73 Or Vosbs As Set Forth In 852.219-74. Any Work That A Similarly Situated Vip-listed Subcontractor Further Subcontracts Will Count Towards The 50% Subcontract Amount That Cannot Be Exceeded. Cost Of Materials Are Excluded And Not Considered To Be Subcontracted. (ii) In The Case Of A Contract For Supplies From A Nonmanufacturer, It Will Supply The Product Of A Domestic Small Business Manufacturer Or Processor, Unless A Waiver As Described In 13 Cfr 121.406(b)(5) Is Granted. The Offeror Understands That, As Provided In 13 Cfr 121.406(b)(7), Such A Waiver Has No Effect On Requirements External To The Small Business Act, Such As The Buy American Act Or The Trade Agreements Act. (2) Manufacturer Or Nonmanufacturer Representation And Certification. [offeror Fill-in - Check Each Applicable Box Below. The Offeror Must Select The Applicable Provision Below, Identifying Itself As Either A Manufacturer Or Nonmanufacturer]: (i)  manufacturer Or Producer.â the Offeror Certifies That It Is The Manufacturer Or Producer Of The End Item Being Procured, And The End Item Is Manufactured Or Produced In The United States, In Accordance With Paragraph (a)(1)(i). (ii)  nonmanufacturer.â the Offeror Certifies That It Qualifies As A Nonmanufacturer In Accordance With The Requirements Of 13 Cfr 121.406(b) And Paragraph (a)(1)(ii). The Offeror Further Certifies It Meets Each Element Below As Required In Order To Qualify As A Nonmanufacturer. [offeror Fill-in - Check Each Box Below.] The Offeror Certifies That It Does Not Exceed 500 Employees (or 150 Employees For The Information Technology Value Added Reseller Exception To Naics Code 541519, Which Is Found At 13 Cfr 121.201, Footnote 18). The Offeror Certifies That It Is Primarily Engaged In The Retail Or Wholesale Trade And Normally Sells The Type Of Item Being Supplied. The Offeror Certifies That It Will Take Ownership Or Possession Of The Item(s) With Its Personnel, Equipment, Or Facilities In A Manner Consistent With Industry Practice. (iii) If This Is A Multiple Item Acquisition, The Offeror Certifies That At Least 50% Of The Estimated Contract Value Is Composed Of Items That Are Manufactured By Small Business Concerns. (3) The Offeror Acknowledges That This Certification Concerns A Matter Within The Jurisdiction Of An Agency Of The United States. The Offeror Further Acknowledges That This Certification Is Subject To Title 18, United States Code, Section 1001, And, As Such, A False, Fictitious, Or Fraudulent Certification May Render The Offeror Subject To Criminal, Civil, Or Administrative Penalties, Including Prosecution. (4) If Va Determines That An Sdvosb/vosb Awarded A Contract Pursuant To 38 U.s.c. 8127 Did Not Act In Good Faith, Such Sdvosb/vosb Shall Be Subject To Any Or All Of The Following: (i) Referral To The Va Suspension And Debarment Committee; (ii) A Fine Under Section 16(g) (1) Of The Small Business Act (15 U.s.c. 645(g)(1)); And (iii) Prosecution For Violating Section 1001 Of Title 18. (b) The Offeror Represents And Understands That By Submission Of Its Offer And Award Of A Contract It May Be Required To Provide Copies Of Documents Or Records To Va That Va May Review To Determine Whether The Offeror Complied With The Limitations On Subcontracting Requirement Specified In The Contract Or To Determine Whether The Offeror Qualifies As A Manufacturer Or Nonmanufacturer In Compliance With The Limitations On Subcontracting Requirement. Contracting Officers May, At Their Discretion, Require The Contractor To Demonstrate Its Compliance With The Limitations On Subcontracting At Any Time During Performance And Upon Completion Of A Contract If The Information Regarding Such Compliance Is Not Already Available To The Contracting Officer. Evidence Of Compliance Includes, But Is Not Limited To, Invoices, Copies Of Subcontracts, Or A List Of The Value Of Tasks Performed. (c) The Offeror Further Agrees To Cooperate Fully And Make Available Any Documents Or Records As May Be Required To Enable Va To Determine Compliance. The Offeror Understands That Failure To Provide Documents As Requested By Va May Result In Remedial Action As The Government Deems Appropriate. (d) Offeror Completed Certification/fill-in Required. The Formal Certification Must Be Completed, Signed And Returned With The Offeror's Bid, Quotation, Or Proposal. The Government Will Not Consider Offers For Award From Offerors That Do Not Provide The Certification, And All Such Responses Will Be Deemed Ineligible For Evaluation And Award. certification i Hereby Certify That If Awarded The Contract, [insert Name Of Offeror] Will Comply With The Limitations On Subcontracting Specified In This Clause And In The Resultant Contract. I Further Certify That I Am Authorized To Execute This Certification On Behalf Of [insert Name Of Offeror]. printed Name Of Signee: printed Title Of Signee: signature: date: company Name And Address: (end Of Clause) vaar 852.239-71, Information System Security Plan And Accreditation (feb 2023) vaar 852.239-75, Information And Communication Technology Accessibility Notice (feb 2023) vaar 852.239-76, Information And Communication Technology Accessibility (feb 2023) vaar 852.273-70, Late Offers (nov 2021) all Quoters Shall Submit The Following: Certificate Of Compliance For Supplies And Products, Pricing Quote, Copy Of Oem S Authorized Distributor Letter (if Applicable), And Estimated Schedule For Delivery. delivery Shall Be Provided No Later Than 60 Days After Receipt Of Order (aro) Unless Notification Of Delays Are Provided To The Contracting Officer/specialist. Fob Destination. place Of Performance/place Of Delivery address: 3200 Vine Street cincinnati, Oh postal Code: 45220-2213 country: united States award Will Be Based Upon A Comparative Evaluation Of Quotes In Accordance With The Simplified Acquisition Procedures Of Far 13. Comparative Evaluation Is The Side By Side Pairwise Comparison Of Quotes Based On Factors Resulting In A Contracting Officer Decision For The Quote Most Favorable To The Government. the Following Are The Decision Factors: Price, Technical Capabilities, Product Support, Warranty/extended Warranty, And Speed Of Delivery. the Award Will Be Made To The Response Most Advantageous To The Government. Responses Should Contain Your Best Terms, Conditions. to Facilitate The Award Process, All Quotes Must Include A Statement Regarding The Terms And Conditions Herein As Follows: "the Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document Without Modification, Deletion, Or Addition." or "the Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document With The Exception, Deletion, Or Addition Of The Following:" quoters Shall List Exception(s) And Rationale For The Exception(s), If Any. submission Of Your Response Shall Be Received Not Later Than 4:00pm Est On Monday, September 16, 2024, At Barbara.robertson@va.gov. No Submission Received After The Above-mentioned Date And Time Will Be Accepted. late Submissions Shall Be Treated In Accordance With The Solicitation Provision At Far 52.212-1(f). any Questions Or Concerns Regarding This Solicitation Should Be Forwarded In Writing Via E-mail To The Point Of Contact Listed Below By 12:00pm On Thursday, September 12, 2024. Responses Will Be Posted By 5:00pm On Thursday, September 12, 2024. No Telephone Calls Will Be Accepted. point Of Contact: Barbara Robertson, Email: Barbara.robertson@va.gov

Details: Description Bids And Awards Committee Iloilo Provincial Government Procurement Of Medical Oxygen Bid No. Sdh-24-399-b Philippine Bidding Documents Sixth Edition July 2020 Table Of Contents Section I. Invitation To Bid……………………………………………………..3 Section Ii. Instructions To Bidders………………………………………..…...5 1. Scope Of Bid ………………………………………………………………………. 5 2. Funding Information………………………………………………………………. 5 3. Bidding Requirements ……………………………………………………………. 5 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 5 5. Eligible Bidders…………………………………………………………………… 5 6. Origin Of Goods ………………………………………………………………….. 6 7. Subcontracts ……………………………………………………………………… 7 8. Pre-bid Conference ………………………………………………………………. 7 9. Clarification And Amendment Of Bidding Documents …………………………… 7 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 7 11. Documents Comprising The Bid: Financial Component …………………………... 7 12. Bid Prices …………………………………………………………………………. 8 13. Bid And Payment Currencies ……………………………………………………… 8 14. Bid Security ………………………………………………………………………. 8 15. Sealing And Marking Of Bids ……………………………………………………… 9 16. Deadline For Submission Of Bids …………………………………………………. 9 17. Opening And Preliminary Examination Of Bids ………………………………….. 9 18. Domestic Preference ……………………………………………………………… 9 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 9 20. Post-qualification ………………………………………………………………… 10 21. Signing Of The Contract …………………………………………………………… 10 Section Iii. Bid Data Sheet …………………………………………………..11 Section Iv. General Conditions Of Contract……………………...………..12 1. Scope Of Contract ………………………………………………………………… 12 2. Advance Payment And Terms Of Payment ……………………………………….. 12 3. Performance Security ……………………………………………………………. 12 4. Inspection And Tests ……………………………………………………………… 12 5. Warranty …………………………………………………………………………. 13 6. Liability Of The Supplier ………………………………………………………….. 13 Section V. Special Conditions Of Contract ………………………………….14 Section Vi. Schedule Of Requirements ……………………………………....16 Section Vii. Technical Specifications …………………………………………17 Section Viii. Checklist Of Technical And Financial Documents …………..18 Section I. Invitation To Bid Purchase Of Medical Oxygen Bid No. Sdh-24-399-b 1. The Iloilo Provincial Government Through The General Fund 2024 Intends To Apply The Sum Of Nine Hundred Ninety Thousand Pesos (php 990,000.00) Being The Abc To Payments Under The Contract For The Purchase Of Housekeeping Supplies. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Staggered Delivery Upon Receipt Of The Notice To Proceed (ntp) Until December 2024. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat Of The Iloilo Provincial Government And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On April 5, 2024, From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (php1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Iloilo Provincial Government Will Hold A Pre-bid Conference On N/a At N/a At The N/a And/or Through Video Conferencing Or Webcasting, Upon Request At Least Three (3) Days Before The Pre-bid Conference, Via Zoom Or Other Videoconferencing Portals, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The 5th Floor, Bids And Awards Committee Secretariat Office, Iloilo Provincial Capitol On Or Before April 16, 2024 At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On April 16, 2024 At 9:01 A.m. At The 5th Floor, Bids And Awards Committee Secretariat Office, Iloilo Provincial Capitol. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. A. The Participating Bidder/supplier Or Its Authorized Representative Must Indicate In Any Of The Eligibility Documents, An Email Address Or A Working Fax Number. The Absence Of Which Shall Be A Ground For Disqualification. Notice To The Bidder/supplier Through The Use Of Either Of These Means (email/fax) Is Considered Sufficient Notice. The Date Of Filing Of Reconsideration And All Communications With The Bac Shall Be Its (bac) Date Of Receipt. B. The Bidder(s)/awardee(s) Or Its Authorized Representative Must Conform To The Notice Of Award Within Three (3) Calendar Days From Receipt Of Such Notice And The Winning Bidder Shall Post The Required Performance Security And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award In Accordance With Section 37.2.1 Of The Revised Irr Of R.a. No. 9184. C. The Bidder/supplier Must Have No Pending Unaccepted Notice To Proceed Three (3) Days From The Date Of Acceptance And Signing Of The Purchase Order. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. D. The Bidder/supplier Must Have No Notice Of Award Pending Its Conformity Three (3) Days From The Date Of Its Receipt Of The Notice Of Award. Otherwise, It Shall Be Aground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. E. The Bidder/supplier Shall Submit A List Of All Its Ongoing And Completed Projects With The Iloilo Provincial Government Indicating The Delivery Periods And Accomplishments Of Such Projects. F. The Bidder/supplier At The Time Of The Bidding Must Have No Pending Unposted Performance Or Warranty Security, As The Case May Be, Beyond The Period Allowed In The Notice Of Award. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. G. When An Occurrence Of A Tie Among Bidders Takes Place, I.e., Two Or More Of The Bidders Are Determined And Declared As The Lowest Calculated And Responsive Bidder (lcrb), The Winning Bidder Shall Be Determined By Draw Lots Upon Notice To The Bidders Concerned And/or Their Authorized Representatives In Accordance With The Relevant Circulars Issued By The Government Procurement Policy Board (gppb). 11. The Iloilo Provincial Government Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Bac Secretariat Head 5th Floor, Bids And Awards Committee Iloilo Provincial Capitol Email Address: Ipg_bacs@yahoo.com Website: Iloilo.gov.ph Telephone Number: (033) 336-0736 13. You May Visit The Following Websites For Downloading Of Bidding Documents: Ipg.gov.ph And/or Philgeps.com March 25, 2024 Atty. Dennis T. Ventilacion Chairman, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Iloilo Provincial Government Wishes To Receive Bids For The Purchase Of Medical Oxygen With Bid No. Sdh-24-399-b. The Procurement Project (referred To Herein As “project”) Is Composed Of One (1) Items, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2024 In The Amount Of Nine Hundred Ninety Thousand Pesos (php 990,000.00) 2.2. The Source Of Funding Is: Lgus, The Annual Or Supplemental Budget, As Approved By The Sanggunian. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. B. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. C. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: [select Either Failure Or Monopoly Of Bidding Based On Market Research Conducted] I. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And Ii. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause5.3 Should Have Been Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time At Its Physical Address As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Complete Bid - One Project Having Several Items That Shall Be Awarded As One Contract In Case Of Complete Bid. Line Bidding/partial Bidding - One Project Having Several Items, Which Shall Be Awarded As Separate Contracts Per Item 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Refers To The Contracts To Be Bid Or The Object Of The Contract; B. Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed. 12 The Price Of The Goods Shall Be Quoted Ddp Sara District Hospital, Sara, Iloilo Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Five Percent (5%) Of Abc, If Bid Security Is In Surety Bond. 15 Bidders Shall Prepare An Original Of The First (eligibility And Technical) And Second (financial) Envelopes. In Addition, Bidders Shall Submit Separate Copies Of The First And Second Envelopes (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. 19.3 No Further Instructions. 20.2 For The Procurement Of Drugs And Medicines And Medical Equipment/supplies, The Bidder Shall Submit The Following: A. Certificate Of Product Registration From Food And Drug Administration (fda) For Easy Validation During The Post-qualification; B. Certificate If Good Manufacturing Practice From Fda, For Easy Validation During The Post-qualification; C. Batch Release Certificate From Fda, For Easy Validation During The Post-qualification; D. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/ Dealer Of The Products / Items For Easy Validation During The Post-qualification; E. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license: S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer); F. License To Operate (lto) Issued By Fda, If Applicable; G. After-sales Services/parts, If Applicable; H. Manpower Requirements, If Applicable. 21.2 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Iv (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 6.1. In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 6.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines, State:] “the Delivery Terms Applicable To This Contract Are Delivered To The Sara District Hospital, Sara, Iloilo. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The Authorized Employee/official Of The Iloilo Provincial Government. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. 2.2 Partial Payment Is Not Allowed. 4 The Inspections And Tests That Will Be Conducted Are Through Physical Inspection. Item Number Description Quantity Total Delivered, Weeks/months 1 Medical Oxygen, 1800psi 1980 1980 Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. ___________________________________ Signature Over Printed Name Section Vii. Technical Specifications Bid No.: Sdh-24-399-b Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Medical Oxygen, 1800psi Terms And Conditions 1. The Supplier Should Have Functioning Local Production Facility In Panay Island 2. Supplier Complied With Oxygen Purity Standards. 3. Delivery Shall Be Staggered For A Duration Of 1 Year. 4. The Supplier Must Be Able To Respond To Request And Deliver Everyday Even On Weekends And On Holidays. 5. The Supplier Must Be Able To Respond To Emergency Request. 6. The Supplier Must Be Able And Willing To Allocate __ Cylinders Free Of Charge For Hospital Use Or As Free Loan. 7. The Supplier Must Have No Previous Complaints With Regards To Quality Of Goods Offered And The Services Provided. 8. The Supplier Shall Conduct Repair On Defective Tanks During The Duration Of The Contract. 9. The Supplier Shall Submit Any Of The Following Certificate To Be Attached In The Bidding Documents: • Iso Registration/ Certification International • Ps Certification From Bureau Of Philippine Standard 10. The Supplier Must Have A License To Operate As A Drug Manufacturer And Certificate Of Product Registration Of 99% Oxygen Purity With The Philippine Food And Drug Administration Bearing The Requisite Address Specific To The Functioning Local Production Facility. ___________________________________ Signature Over Printed Name Section Viii. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages);or ⬜ (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document, And ⬜ (c) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And ⬜ (d) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (i) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (j) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (k) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc); Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (l) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (m) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (n) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (o) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (p) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.

Details: Sources Sought Notice 36c24924q0266 sources Sought Notice Mobile Ct Diagnostic Screening For Clinics this Is A Sources Sought Notice. This Is Not A Solicitation For Proposals, Proposal Abstracts, Or Quotations. The Purpose Of This Notice Is To Obtain Information Regarding The Availability And Capability Of All Qualified Sources To Perform A Potential Requirement. services Required: The Department Of Veterans Affairs (va), Veterans Health Administration (vha) Mt. Home And Lexington Vamc Surrounding Area Clinics Have A Need For Mobile Ct Diagnostic Screening. purpose And Objectives: Your Responses To The Information Requested Will Assist The Government In Determining The Appropriate Acquisition Method. projected Naics Code: 621512 And Sized Standard Is $19.0 Million. note: Respondent Claiming Sdvosb And Vosb Status Must Be Registered And Verified In Sba Vetcert. Additionally, All Offerors Responding To A Solicitation Must Have An Active Registration In The System For Award Management (sam) At The Time Of Quote Submission. anticipated Period Of Performance: Services Are Needed October 1, 2024. sources Sought Questionnaire company Name ___________________________________________ poc ___________________________________________ phone Number ___________________________________________ email Address ___________________________________________ uei ___________________________________________ 1. Is Your Firm Considered A Small Business? The North American Industry Classification System (naics) Code Is Tentatively 621512; The Small Business Size Standard For This Naics Code Is $19.0 Million. a Size Standard, Which Is Usually Stated In Number Of Employees Or Average Annual Receipts, Represents The Largest Size That A Business (including Its Subsidiaries And Affiliates) May Be To Remain Classified As A Small Business For Small Business Administration And Federal Contracting Programs. The Definition Of "small" Varies By Industry. Is Your Business Considered Any Of The Following? [ ] Yes [ ] No Service Disabled Veteran Owned Small Business (sdvosb)** [ ] Yes [ ] No Veteran Owned Small Business (vosb)** [ ] Yes [ ] No Historic Underutilized Business Zone (hubzone) [ ] Yes [ ] No Small Disadvantaged Business (sdb) [ ] Yes [ ] No Woman Owned Small Business (wosb) [ ] Yes [ ] No Small Business (sb) if You Are A Small Business, Are You Able To Comply With Far 52.219-14 Limitations On Subcontracting? [ ] Yes [ ] No 2. Does Your Firm Have An Active Registration In The System For Award Management (sam)? [ ] Yes [ ] No 3. Have You Provided Mobile Ct Diagnostic Screening Services To A Federal Agency In The Past? If So, Please List Experience. 4. Do You Have Ct Technicians Who Are Available To Provide These Services? Please Provide Details, To Include How Many Available Providers, Their Location, Etc. 5. How Long Would It Take To Procure And/or Assemble The Necessary Equipment Needed To Meet This Requirement After Award? 6. Provide Any Additional Feedback That You Feel Is Relevant (i.e., Problems Or Any Other Issues Experienced With Similar Contracts). note: Do Not Include Proprietary, Classified, Confidential, Or Sensitive Information In Responses. please E-mail Your Questionnaire Response With The Above Information To Angie Tucker (christina.curley@va.gov) With The Subject Line "sources Sought Notice: Mobile Ct Diagnostic Screening By 10:00am Ct On May 09, 2024. disclaimer And Important Notes. This Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. The Government Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. Any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization S Qualifications To Perform The Work. Respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. After A Review Of The Responses Received, A Pre-solicitation Synopsis And Solicitation May Be Published To The System For Award Management. However, Responses To This Notice Will Not Be Considered Adequate Responses To A Solicitation. confidentiality. No Proprietary, Classified, Confidential, Or Sensitive Information Should Be Included In Your Response. The Government Reserves The Right To Use Any Non-proprietary Technical Information In Any Resultant Solicitation(s). general Information contract Opportunity Type:â sources Sought (original) all Dates/times Are:â (utc-10:00) Central Time, Chicago, Usa original Published Date:â april 23, 2024 original Response Date:â may 09,2024; 10:00 Am Ct agency: Department Of Veterans Affairs (va), Network Contracting Office 9 (nco 9) For The James H. Quillen Vamc (jhqvamc) classification original Set Aside: Unrestricted product Service Code:â q522 Medical Diagnostic Imaging naics Code: 621512 And Size Standard $19.0 Million place Of Performance: Mt. Home And Lexington Vamc Surrounding Area Clinics description this Request For Information (rfi) / Sources Sought (ss) Notice Is For Market Research, Information, And Planning Purposes Only And Shall Not Be Construed As A Solicitation Or As An Obligation On The Part Of Va Or The James H. Quillen Va Medical Center. This Is Not A Solicitation For Proposals, Proposal Abstracts Or Quotations. The Purpose Is To Obtain Information Regarding The Availability And Capability Of All Qualified Sources To Perform A Potential Requirement. this Is A New Requirement For Mobile Ct Scanning. Services Are To Be Provided To 11 Rural Community Based Outpatient Clinics (cbocs) In The Mountain Home Va And Lexington Va Catchment Areas. The Contractor Shall Provide All Resources And Equipment Necessary To Provide These Services. a One-week Period Is Being Given To Respond To Potential Contractor Questions. If You Are Interested And Have Questions, Please Submit Your Questions Via E-mail To Christina.curley@va.gov By 10:00 Am On May 2, 2024. Questions Will Be Answered Via An Amendment To This Sources Sought Notice. general Information introduction And Overview mountain Home And Lexington Vamc Radiology Requires Contractual Services To Provide Mobile Computed Tomography (ct) Imaging Services To 11 Rural Community Based Ouptatient Clinics (cbocs) In The Mountain Home Va And Lexington Va Catchment Areas. Mobile Ct Imaging Services Includes A Primary Self-propelled Freightliner With Box Platform Containing A Fully Diagnostic Ct Unit With Table. Mobile Vehicle Will Transport Equipment And Personnel To Multiple Locations On A Rotating Schedule. Ct Imaging Equipment Will Be Fully Diagnostic Ct Unit To Include Table And All Other Equipment To Be Fully Operational. Contractor To Supply Qualified Technologist Staffing And Driver For Mobile Vehicle Unit. The Contractor Shall Provide All Labor, Materials, Equipment, Maintenance And Repair Of All Contractor-furnished Equipment (including The Mobile Vehicle Unit). Contractor Shall Be Responsible To Maintain All Of The Equipment In Good Working Order At All Times And Shall Reimburse The Visn For Lost Time, Which May Result From Defective Workmanship Or Equipment Failure. Services Shall Be Performed As Listed In The Schedule Of Pricing. contractor Responsibilities Summary But To Include All Items Within This Contract And Requirements To Be Fully Operational As A Vehicle And As Imaging Units. contractor Shall Provide All Personnel, Transportation, And Equipment. services Shall Be Performed By Certified Technologists. contractor Shall Provide A Mobile Service Solution That Shall Include A State-of-the-art Ct Unit A Suitable Automobile. Vendor Will Complete 6550 And Mds2 Will Proposal. contractor Shall Provide Two Techs For Ct Unit In Addition To A Cdl-rated Driver. all Patients Scheduled And/or Added On Will Be Scanned By The Contractor Staff With All Digital Images Transferred To Va Picture Archiving Communication System (pacs). Technologist Will Verify Image Transfer On All Exams And Complete All Requirement Work To Bring Exam To Completion. supplies contractor Shall Solely Be Responsible For The Procurement, Receipt, Dispensing, Administration And Safekeeping Of All Supplies Defined Herein. These Supplies Include Items For Maintaining Equipment, Patient Positioning, Computer Systems, And Any Other Items Required To Operate Equipment And Perform Exams. term Of The Contract the Resulting Contract Shall Be Effective For A Base Period Of One (1) Year From Date Of Award Plus Four (4) One-year Option Periods, Renewable At The Government S Discretion. This Contract Is Subject To The Availability Of Visn Funds; No Service Shall Be Performed After End Of Contract Term, Unless Authorized By The Administrative Contracting Officer. contractor S Furnished Equipment equipment Shall Include, But Not Be Limited To, A Contractor-furnished, Fully Equipped, Freightliner Chassis With Custom Box Housing A Fully Diagnostic Ct Imaging Unit With Table. Ct Imaging Services Will Be Performed On A Mobile Unit That Meets Facility Approval (documentation Of Proposed Units To Be Provided With Bid). Equipment Specifications Will Include Year, Manufacturer, Model Number, And Make Of All Pertinent Information. All Equipment Used Will Be Fda Approved Imaging Equipment. The Entire Offering Of Mobile Radiology Services Shall Meet All Local, State, Federal, Industry, Jcaho, Nec, Nfpa, Va, Osha And Other Regulatory Standards Internal And External For Which The Visn Is Currently Accountable And Will Be Kept Current With All Federal And State Regulations. system Capability Requirements contractor Shall Provide An On-site Mobile Ct Unit That Is A Full System In Accordance With The Terms And Conditions Of This Contract. The Unit Shall Have The Ability To Perform Diagnostic Quality Ct. mobile Unit Capabilities And Requirements the Mobile Unit Must Have The Following: hardware And Software To Support Fully Diagnostic Uncompressed Images To Include Compatible Post Processing Advanced Imaging. fips 140-2 Compliant On All Systems Directly Interfacing With Government Network. ability To Create, Store And Export Dicom, Jpeg And Mpeg File Formats. dicom 3.0 Network Capability For Export Of Images Within Visn. Transport Of Images Will Be Va-supplied Network Infrastructure. the Mobile Unit Shall Be Equipped With A Cd-r Burner For A Backup To Transfer Data And To Burn Disc For Patients On Request. the Mobile Unit Shall Provide The Space Sufficient And The Appropriate Equipment For Performing Cpr, If Necessary. the Mobile Unit Will Require Network Connection For Government Furnished Computer To Be Utilized By Technologists To Complete All Government Requirements For Exam Completion. contractor Shall Provide Network Connection Solution For Transferring Of Images To Va Network That Meets All Security Requirements. Provide Solution/s And/or Options With Proposal For Bid. mobile Unit Accessories the Following Accessory Equipment Shall Be Provided By The Contractor: handicap Accessibility, Including Patient Lift intercom System Between The Control Room And The Scanning Room the Mobile Unit Shall Provide All Equipment Compatible With Mobile Unit, E.g. Pads, Sponges, Patient Moving Accessories, Wheelchair, And Etc. equipment Specifications the Following Minimum Performance Characteristics Of The Equipment Are Required: the Imaging Equipment Shall Provide Images With Consistently High Technical Quality To Be Assessed By Va-employed Experts. Poor Image Quality Will Be Considered Non-performance Under This Contract And Must Be Remedied Within 10 Days Of Notification Or Incur Default. the Imaging Equipment Shall Be Capable Of Acquiring Diagnostic Quality Of Images Of All Parts Of The Body Including Lung Cancer Screening Ldct Within The Radiation Dose Limits Prescribed By Va. the Imaging Equipment Shall Be Capable Of Acquiring Images And All Post Processing Requirements To Deliver High Quality Diagnostic Images. contractor Shall Provide Generator For Self-contained Power To Fully Operate Entire Coach And All Equipment Within, Possibly For Extended Periods Of Time. the Mobile Imaging Unit Shall Be Ready For Use Regardless Of Outside Environmental Conditions, And Shall Adhere To The Following: the Mobile Unit Shall Maintain A Temperature To Assure Proper Operation Of Equipment Without Frequent Calibration And Provide For Patient Comfort. the Mobile Unit And Imaging Equipment Shall Meet All Federal, State, Fire And Safety Requirements. the Mobile Unit Shall Be Equipped With Outlet Jacks Connections Capable Of Transmitting Data And Voice Through Government-provided Category Five (5) And Dual Power Phone Cable. the Mobile Unit Shall Be Equipped With Secured Landline And Wireless Technology That Will Allow For Transmission Of Images. Contractor Shall Provide Full Solution Within Proposal. pedestal Power And Landline Network Will Not Be Provided By Government Due To Separate Existing Building Lease Contract Restraints. Contractor May Work Independently With Building Owner To Establish Pedestal Power And Landline At Contractor Expense. Please Note Each Location Is Unique Environment And All Have Different Building Owners. the Imaging Equipment Shall Support Dicom Modality Worklist (dmwl) For Future Use And Shall Be Able To Export Dicom Images To At Least One Destination. the Imaging Systems Must Be On The Vista Imaging Approved Dicom Modality Interface List. equipment Maintenance / Repairs equipment Provided Shall Be In Good Working Order At All Times In Order To Provide High Quality Scans Required Under This Contract. Contractor Shall Be Completely Responsible For The Preventive Maintenance, Emergency And General Repairs, Safety, Cleaning, And Upkeep Of All Equipment Furnished By The Contractor. Preventative Maintenance/repairs On The Mobile Unit And All Associated Equipment Shall Be Performed In Accordance With The Conformance Standards And Manufacturer S Recommendations. If The Equipment Should Fail During Normal Working Hours, Every Effort Should Be Taken In Order To Reduce Equipment Downtime By Expediting Repairs. exams Canceled Or Postponed Due To Failure Of Services Provided By The Contractor Must Be Rescheduled And Performed By The Contractor No Later Than The Next Regularly Scheduled Visit To The Site And During Normal Operating Hours Of The Clinic Services. If It Is Not Possible To Reschedule The Patient Within This Window And The Clinic Must Make Alternate Arrangement To Have The Patient Sent To Another Local Facility For The Tests, The Contractor Shall Bear The Costs Associated With Such Re-procurement. The Visn Will Provide The Contractor With An Itemized List Of Costs As A Result Of Any Service Failure And Cost Will Be Deducted From The Contractor S Invoice For The Period Involved. contractor Shall Be Responsible For The Overall Housekeeping Of The Unit Including But Not Limited To Removal And Proper Disposal Of All Debris On A Daily Basis Or As Often As Necessary To Maintain A Sanitized And Neat Environment In Accordance With The Conformance Standards. contractor Shall Be Responsible For All Equipment While On Va Premises. At Least One Of Contractor S Personnel Must Be Present During Working Hours While The Equipment Is Located On Va Premises. The Visn Will Not Be Held Responsible For Any Loss Or Damage To The Contractor S Property, Which May Be Vandalized Or Damaged, Including The Mobile Unit While On Site. Contractor Shall Maintain Property Insurance On All Equipment Throughout The Duration Of The Contract And The Successful Contractor Shall Provide Proof Of Insurance As Required Herein. Contractor Key Personnel Qualifications And Responsibilities a Proposal Will Be Considered Only From Offerors Who Are Regularly Established In The Business Called For, Who Are Financially Responsible And Have The Necessary Equipment And Personnel To Furnish Service In The Volume Required For All Items Under This Solicitation. The Successful Contractor Shall Meet All Federal, State And Local Codes And Requirements For The Operation Of This Service And Equipment Provided. Employees Authorized By The Contractor To Perform Services Under This Specification And Any Resulting Contract, (including All Technologists) Shall Be Licensed And/or Registered In A State, Territory Or Commonwealth Of The United States Or The District Of Columbia. Contractor Shall Provide With His Or Her Signed Proposal, A Description Of All Personnel, Who Will Be Providing Services Under This Rfp. These Personnel Shall Include, But Not Be Limited To The Technologists, Support And Driver Staff Who May Visit A Medical Center As Part Of Their Duties Under This Contract Or Have Access To Confidential Personal Patient Information. . In Addition, The Technologists Shall Be Certified In The Specific Modality Being Performed As Defined Herein. The Contractor Shall Provide Documentation Of Training And Competency Of All Proposed Technologists In All Of The Following Areas: ct Imaging operation Of Mobile Unit/s And Software Applications license To Operate Motorized Vehicle Contractor Key Personnel Qualifications And Responsibilities contractor Shall Provide All Required Modality Certified Technologists And Any Qualified Support Staff (as Patient Volume Requires) Necessary To Provide Services For The Va Patients. in The Event That Additional Technologists Are Required To Increase Services Under This Contract, The Contractor Shall Be Requested To Provide A Written Description Of Those Personnel To The Administrative Contracting Officer For Approval And Security Clearance (background Investigation) Prior To The Commencement Of Any Additional Services. the Contractor Is Required To Develop And Maintain The Following Documents For Each Contractor Employee Working On The Contract: Credentials And Qualifications For The Job; A Current Competence Assessment Checklist (an Assessment Of Knowledge, Skills, Abilities And Behaviors Required To Perform A Job Correctly And Skillfully; Including Knowledge And Skills Required To Provide Care For Certain Patient Populations, As Appropriate.); A Current Performance Evaluation Supporting Ability Of The Contractor Employee To Successfully Perform The Work Required In This Solicitation; And Listing Of Relevant Continuing Education For The Last Two (2) Years. The Contractor Will Provide Current Copies Of These Records At The Time Of Contract Award And Annually On The Anniversary Date Of Contract Award To The Contracting Officer S Representative (cor), Or Upon Request, For Each Contractor Employee Working On The Contract. Qualifications Of Personnel Are Subject To Review And Final Approval By The Visn 9 Radiology Icc Lead. personnel Assigned By The Contractor To Perform The Services Covered By This Contract Shall Be Proficient In Written And Spoken English (38 Usc 7402). Contractor S Technologists Will Be Required To Pull From Ris Worklist And/or Type Patient Information Into The Imaging System Computer Ensuring That All Images Are Identified With The Correct Patient Information To Include: Full Name, Social Security Number, Date/accession Number And Modality Type. Contractor S Assigned Personnel Must Be Computer Literate In The Type Of Software And/or Hardware Associated With Their Duties. the Technologist Shall Complete Training For Government Supplied Software And Hardware Required For Completion Of Exams Performed. mobile Unit Driver Shall Be Licensed As Applicable To Operate And Drive The Mobile Vehicle In Which The Unit Is Housed. contractor Technical Employees Shall Be Cpr Bls Certified And Are Authorized To Initiate This Life-saving Act If Necessary. the Imaging Technologists Shall Be Trained And Qualified To Identify Contraindications To Imaging Exams. imaging Technologist Shall Be Responsible To Screen Patients Prior To Performing Exams To Verify The Patient S Identification, Pregnancy Status, Breastfeeding Status, And Confirm The Procedure To Be Performed Prior To Commencement Of Any Services. Disqualification Of A Patient From The Exam Must Be Documented And Provided To Designated Va Point Of Contact Before The Patient Leaves The Imaging Unit. the Technologist Is Responsible For The Initial Assessment And Identification Of Medical Emergencies And Initiating The Emergency Response Procedure For Patients In Their Care. The Training For This Will Be A Part Of Initial Facility Orientation. technologist Shall Ensure That All Imaging Exams Shall Be Acquired And Processed Per Procedures And Protocols Provided By The Facility Radiology Physicians. Raw And Processed Data Remain The Property Of The Government. va Radiology Physicians Will Perform Interpretations Of The Examination(s). Unsatisfactory/non-diagnostic Examinations Shall Be Re-performed At The Discretion Of Designated Radiology Physician. Certifications / Licensing Of Technologist vendors Shall Submit With Their Offer The Following Documents: copy Of All Personnel S Current Licenses (certification / Registration) list Of Experience Of Proposed Contract Employees competency Checklist cpr Bls Certificate Additional Requirements For Contractor Personnel And Contractor Operation: contractor Shall Provide The Visn Seven (7) Day Per Week Telephone Access To The Mobile Company Used In Performance Of This Contract. services Provided By The Contractor Shall Be Performed Within The Policies, Procedures And Regulations Of The Va Facilites, To Include The Following Medical Center Memorandums: mountain Home: lexington: the Contractor's Radiation And Patient Safety Policies Must Meet Or Exceed The Visn Policies For Standards Of Care. The Contractor S Current Policies For Radiation And Patient Safety Must Be Included With Proposal For Review By The Visn. If Policies Are Found To Be Less Stringent Than Visn Policies, Contractor Must Meet Or Exceed The Visn Policies For Standards Of Care. contractor Shall Meet The Safety Requirements Of Posting Radiation Hazardous Signs Around The Mobile Unit And Make Certain Any Cable Is Under A Metal Cover, If It Crosses The Crosswalk. neither The Contractor Nor The Contract Personnel Shall In Any Way Undertake The Practice Of Medicine, Render Medical Opinions Or Services Other Than Those Services Required To Support The Well-being Of The Patient, Or In Any Way With The Patient Other Than To Provide All Ancillary And Technical Services Required For The Operation Of The Unit. The Government May Evaluate The Quality Of Professional And Administrative Services Provided, But Retains No Control Over The Medical Aspects Of Services Rendered, In Accordance With Far 37.401(b), Non-personal Health Care Services. Personnel Policy the Contractor Shall Be Responsible For Protecting The Personnel Furnishing Services Under This Contract. To Carry Out This Responsibility, The Contractor Shall Provide The Following For These Personnel: worker S Compensation professional Liability Insurance income Tax Withholding social Security Payments holiday Pay health Examinations, Including, But Not Limited To: Tuberculosis Testing Contractor Shall Provide Proof Of A Negative Reaction To Purified Protein Derivative (ppd) Testing. A Negative Chest Radiographic Report For Active Tuberculosis Shall Be Provided In Cases Of Positive Ppd Results. The Ppd Test Shall Be Repeated Annually. Rubella Testing Contractor Shall Provide Proof Of Immunization For Measles, Mumps, Rubella Or A Rubella Titer Of 1.8 Or Greater. If The Titer Is Less Than 1.8, A Rubella Immunization Shall Be Administered With Follow-up Documentation To The Cor. Oig List Of Excluded Individuals / Entities in Accordance With The Health Insurance Portability And Accountability Act (hipaa) And The Balanced Budget Act (bba) Of 1977, The Office Of Inspector General Has Established A List Of Parties And Entities Excluded From Federal Health Care Programs. Specifically, The Listed Parties And Entities May Not Receive Federal Health Care Program Payments Due To Fraud And/or Abuse Of The Medicare And Medicaid Programs. therefore, All Offerors Shall Review The Oig List Of Excluded Individuals/entities On The Oig Web Site At Www.hhs.gov/oig To Ensure That The Proposed Candidate(s) And/or Firm(s) Are Not Listed. Offerors Should Note That Any Excluded Individual Or Entity That Submits A Claim For Reimbursement To A Federal Health Care Program, Or Causes Such A Claim To Be Submitted, May Be Subject To A Civil Monetary Penalty (cmp) Of $10,000 For Each Item Or Service Furnished During A Period That The Person Or Entity Was Excluded And May Also Be Subject To Treble Damages For The Amount Claimed For Each Item Or Service. Cmp S May Also Be Imposed Against Health Care Providers And Entities That Employ Or Enter Into Contracts With Excluded Individuals Or Entities To Provide Items Or Services To Federal Program Beneficiaries. by Signing The Offer, The Contractor Certifies That He/she Has Reviewed The Oig List Of Excluded Individuals/entities And That The Proposed Candidate(s) And/or Firm Are Not Listed As Of The Date The Offer Was Signed. Tort Claims the Federal Tort Claims Act Does Not Cover Contractor Employees. When A Contractor S Employee Has Been Identified As A Provider In A Tort Claim, The Contractor Employee Is Responsible For Notifying The Contractor S Legal Counsel And/or Insurance Carrier. Any Settlement Or Judgment Arising From A Contractor Employee S Action Or Non-action Is The Responsibility Of The Contractor And/or Insurance Carrier. supporting Information schedule contractor Shall Perform Clinical Services Up To 10 Hours Per Day On A Weekday Or Weekend To Be Established Independently With The Visn. Services Are Based On Demand Of Patient Exam Volumes And/or Limited Equipment Availability Internal To Va. In The Event That There Is A Need To Increase The Number Of Days Per Week In Order To Accommodate Patient Services, The Government Reserves The Right To Increase The Number Of Days As Noted Herein. Contractor Will Be Given At Least Sixty (60) Calendar Days Notice Of The Visn S Intention Of Increasing The Number Of Days Per Month For Which The Contractor Will Perform Services On Site. Additional Days Periodically May Be Added To Meet Backlog Of Exams With Sufficient Notice, Not To Exceed Thirty (30) Days. Additional Days Of Service Will Be Performed For Same Daily Lease Rate Or Less. Overtime Charges Are Not Authorized. Schedule Rate Will Be Based On 8 Hour Or 10 Hour Days Of Direct Clinical Care. Start Of Time And/or Qc Time Will Be Outside Of Direct Clinical Care Hours. Unresolved Scheduling Conflicts Will Be Decided By The Administrative Contracting Officer; The Decision Made Will Be Final. the Contractor Shall Be Required To Confirm The Scheduled Examinations, By Contacting The Cor Or Designee Two (2) Business Days Prior To The Date Of Services. Procedures Will Be Established And Will Be Mutually Agreed Upon Between The Cor, Aco And The Successful Contractor During The Post-award Orientation. the Contractor, Based On The Knowledge Of Their Imaging System Shall Determine A Maximum Number Of Patients That May Be Imaged Within A Day Where The First Patient Begins At 8:00 A.m. In Accordance With The Above, Vendors Shall Submit With His/her Signed Proposal, A Proposed Schedule Based Upon The Level Of Expertise Of The Proposed Contractor Personnel. normal Hours Of Operation contractor Personnel Shall Be Available On Site To Perform Exams On Patients On The Scheduled Weekday, Excluding Federal Holidays. The First Exam Will Start At 8:00 A.m. Unit Delivery, Setup And Daily Quality Control Procedures Shall Be Performed Prior To First Exam And Will Not Delay The Start Of The Examinations. Contractor And Cor Shall Mutually Agree Upon A Schedule Establishing Dates And Time For The Mobile Unit With Technicians To Be Present On Station. Hours Of Operation Must Be Approved In Advance By The Cor. national Holidays And The Weekly Schedule the Eleven (11) Holidays Observed By The Federal Government Are New Year S Day, Martin Luther King S Birthday, Washington S Birthday, Memorial Day, Juneteenth, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving, And Christmas, And Any Other Day Specifically Declared By The President Of The United States To Be A National Holiday. The Government Reserves The Right To Request An Alternate Day For Performing Services To Be Agreed Upon Between The Cor And The Contractor. daily Access To The Cboc Facilities the Contractor Will Be Responsible For Contacting The Cboc Office Manager At The Site Of Service At The Time Of Arrival. The Contractor Will Also Be Responsible For Contacting The Va Police At The Closing Of Each Workday To Ensure That Both The Building And The Data Port Connections Are Secured. The Location And Contact Numbers Will Be Provided By The Cor To The Contractor Following Contract Award. commencement Of Services commencement Of Service Date Is To Be Coordinated With The Cor. Unit Must Be Ready For Patient Services No Later Than 360 Days After Contract Award, Unless Otherwise Agreed To Between The Contracting Officer And The Contractor. inspection And Acceptance the Delivery Location Of The Mobile Unit Site Shall Be Coordinated With The Cor; Inspection And Acceptance Of All Work Performance, Reports And Other Deliverables Under This Contract Shall Be Performed At The Place Of Delivery. deliverables Will Be Inspected For Content, Completeness, And Accuracy And Conformance To Contract Requirements By The Cor Or His/her Designee. Inspection Will Include Validation Of Information Or Software Through The Use Of Automated Tools And/or Testing Of The Deliverables, As Specified In The Contract Order. The Scope And Nature Of This Testing Must Be Negotiated Prior To The Contract Award And Will Be Sufficiently Comprehensive To Ensure The Completeness, Quality And Adequacy Of All Deliverables. reports, Documents And Narrative Type Deliverables Will Only Be Accepted When All Discrepancies, Errors Or Other Deficiencies Identified In Writing By The Government Have Been Corrected. maintenance Logs Will Be Made Available Upon Request. non-conforming Products Or Services non Conforming Products Or Services Will Be Rejected. Unless Otherwise Agreed By The Parties, Deficiencies Will Be Corrected Within Seven (7) Days Of The Rejection Notice. If The Deficiencies Cannot Be Corrected Within Seven (7) Days, The Contractor Will Immediately Notify The Cor And The Administrative Contracting Officer Of The Reason For The Delay And Provide A Proposed Corrective Action Plan Within Seven (7) Working Days. contractor S Responsibilities contractor Will Be Responsible For The Following: timely Delivery Of The Mobile Unit Such That Contractor May Facilitate The Following Startup Functions Prior To The Commencement Of Services: contractor Shall Perform Tests As Necessary So That The Mobile Unit And All Associated Equipment Is Fully Operational, Safe And Ready For Services So That The Schedule Of Patients Is Maintained At All Times. contractor Shall Ensure That The Mobile Unit Is Properly Positioned And Docked. The Temperature Within The Unit Is Set And Maintained Prior To Performing Services. contractor Shall Ensure That The Mobile Unit Is Level And Set For The Safety Of Patients And The Appropriate Utilities Connected For Proper Warm-up Of All Onboard Systems. contractor Shall Allow For Sufficient Time For Contacting The Va Police When Gaining Access To Ava Facility. communications Will Be Operational. daily Quality Control Time Must Not Interfere With The Regular Scheduling Of Patients For Exams. This Start Up Functions Must Be Completed Prior To 8:00 A.m. On Each Day When Unit Is Scheduled To Be On Site In Time For The First Patient To Be On Table At 8:00a.m. contractor Will Be Responsible For Providing Quality Review In Order To Ensure Quality Diagnostic Images At All Sites. Visn9 Reserves The Right To Require Corrective Action If Image Quality Or Other Service Problems Are Brought To The Attention Of The Contractor. contractor Will Be Responsible For Monitoring The Number Of Scans Performed, By Maintaining A Daily Log. contractor Shall Be Joint Commission Accreditation Of Healthcare Organizations (jcaho) Certified, Or Shall Follow Established Jcaho Guidelines As They Pertain To Mobile Operations, And Patient Safety And Shall Follow The Guidelines Of The Department Of Veterans Affairs (va) And Occupational Safety Health Administration (osha). Jcaho Accredited Quality Assurance Survey Reports Shall Be Provided To The Contracting Officer S Representative (cor) Consistent With Joint Commission Recommendations. emergency Repairs contractor Shall Provide, At No Cost To The Visn, All Emergency Services To Include All Required Personnel, Parts And Labor, And Preventive Maintenance/repairs Of Structure And Equipment To Maintain A Safe Environment As Recommended By The Original Equipment Manufacturer (oem) Recommendations/specifications In Accordance With The Agreed Upon Schedule With The Cor. in The Event Of An Equipment Failure During Normal Working Hours While In The Performance Of The Contractor S Services, The Contractor Shall Notify The Cor Or Designee Immediately After Discovery Of Equipment Failure While On Site. All Emergency Repairs Are The Responsibility Of The Contractor. the Cor Shall Determine If Appointments Previously Scheduled Should Be Cancelled And Rescheduled As A Result Of The Equipment Failure. In The Event That The Equipment Fails And The Failed Equipment Is Un-repairable, The Contractor Must Obtain An Alternate Unit Which Meets All Of The Requirements Of The Resulting Contract To Ensure That Services Will Be Performed As Agreed Upon Under This Contract. Contractor-furnished Facilities, Services, Supplies And Equipment contractor Shall Contact The Cor To Make The Necessary Arrangements For A Site Visit Of The Actual Locations Where The Mobile Unit Will Be Located So That Precise Measurements Can Be Taken By The Contractor Who Shall Be Responsible To Confirm Compatibility Of Space. contractor Shall Be Held Responsible For Any Damages, Which May Be Done To The Property During Delivery, Hookup And/or Removal Of Equipment At The Site. Any Damages Caused By The Contractor Shall Be Performed At The Contractor S Expense To The Satisfaction Of The Facility Chief Of Engineering. proper Installation/staging Of The Contractor S Furnished Equipment Including The Mobile Unit Must Be Completed In Accordance With Industry Standards, All Osha Regulations And Applicable Manufacturer S Recommendations. The Above Must Be Completed Prior To Commencement Of Services. Dates And Time For Completion Of The Above Shall Be Mutually Agreed Upon Between The Visn And The Contractor. the Contractor Will Supply All It Technical Support And Vendor Specific Engineer For All Provided Systems. Contractor Provided Information Systems Technical Support And Engineer Will Assure Connectivity And Functionality Of All Equipment During Initial Setup And Thereafter. Contractor Will Assure Availability Of All Support For Timely Contact And Resolution. Government-furnished Facilities, Services, Supplies And Equipment visn9 Shall Provide All Patient Services, With Exception Of The Services Required Of The Contractor Within This Contract, Including The Following: retain Full Medical Responsibility For Its Patients. Contractor Shall Be Responsible For Patient Upon Pickup At The Va Facility Designated Waiting Area, While On The Mobile Unit And During The Entire Scanning Procedure Until Patient Is Returned To The Designated Waiting Area. approval And Scheduling Of Patients For Exams Will Be Provided By The Va Facility Where The Services Are Provided. The Va Facility Will Fax A Patient List Of Exams And Exam Times To The Contractor In A Fashion That Is Timely And Convenient To The Contractor. The Contractor Will Follow Up With Phone Verification Of The Patient List. contractor Shall Be Responsible For Picking Up And Transporting The Patient To The Mobile Unit. Upon Completion Of Services, The Contractor Shall Return Patient To The Designated Waiting Area Within The Facility. the Va Facility Shall Ensure Each Patient Arriving For The Scans Has Physician Orders To Receive Services And Such Other Forms Or Information As Required. Contractor Is Required To Identify Patients Using Two Unique Full Identifiers Prior To Performing Radiology Exams. the Va Facility Will Provide Qualified Physicians Who Will Be Available To Review Orders For Appropriateness, Interpret Reports And Take Such Other Steps As May Be Medically Necessary. the Va Facility Will Provide All Medical Supplies, Facilities, Personnel And Physicians Required To Provide Patients With Medical Care As May Be Required, Including Oxygen, Aspirator And Aed. In Addition To Adhering To Policy And Activating The 911 Response When Deemed Necessary. the Contractor Agrees To Ensure Compliance/acceptance Testing Of The Imaging Equipment Is Performed On At Least An Annual Basis Or If Major Components Of The Machine Is Serviced Or Replaced. The Compliance/acceptance Tests Will Be Done In Accordance With Nationally Recognized Standards. the Contractor Is Responsible For Ensuring The Compliance Testing Of The Mobile Imaging Device By A Qualified Medical Physicist. A Qualified Medical Physicist As Defined Is An Individual Who Is Certified By The American Board Of Radiology, American Board Of Health Physics, Or American Board Of Medical Physics In The Appropriate Disciplines Of Radiologic Physics, And Maintains State Certification As A Health Physicist In The States Of Tennessee And/or Kentucky. A Copy Of The Annual Medical Physicist Report Will Be Provided To The Va Point Of Contact (cor). Cancellations / No Charge Services the Contractor Will Not Charge The Visn For Services Or Supplies When The Vehicle And/or Imaging Units Are Inoperable Due To Equipment Malfunction, Staff Shortage, Or Any Other Fault On The Part Of The Contractor. Removal Of Contractor S Equipment contractor Will Be Responsible For The Timely Removal Of The Mobile Imaging Unit From The Va Premises As Agreed Upon With The Cor Not To Exceed An Eight (8) Hour Period After Completion Of The Last Procedure Is Performed Unless Otherwise Agreed Upon By The Cor, Aco And The Contractor. Contractor Will Also Be Responsible For The Following Daily Exit Functions: ensure That The Day S Entire Exam Data Is Completely Transferred To Each Contractor-provided Advanced Analysis Workstation Inside The Va Facility And To The Vista Imaging Archiving System. Contractor Personnel Will Complete A Checklist To Assure That All Patient Images Transferred Completely To The Primary Contractor-provided Advanced Analysis Workstation And Provide This Signed Checklist To The Cor Or Other Designee. all Patient Exam Data Is Purged From Contractor S Computer Systems Once It Is Verified That Exams Are Viewable On The Primary Contractor-provided Advanced Analysis Workstation. at The Termination Of The Contract, The Contractor Will Remove The Hard Drives Of The Workstations And Supply Them To The Cor. va Information Retained By The Imaging Units And Other Contractor Equipment Will Be Erased At The End Of The Day After The Last Patient Exam Has Been Confirmed To Have Been Transmitted Successfully To Va Picture Archiving System To Include Thin Slices If Further Post Processing Is Required. The Security Of Information Retained By The Imaging Units And Other Contractor Equipment Both During The Contract Period And Post Contract Period Will Be The Responsibility Of The Vendor. all Connections From The Unit To Property Are Properly Disconnected. any Temporary Site Preparations Are Removed Upon Completion Of Services On A Daily Basis. Documentation / Reports the Contractor Will Provide To The Cor Equipment And Maintenance Reports If Requested By The Cor During The Duration Of The Contact. The Contractor Will Also Provide System Pre-check And Associated Documentation At The Time The Unit Is Set Up At The Site Where Services Are To Be Performed. This Is To Ensure Safety Of Equipment Utilized By Va Personnel/beneficiaries. the Contractor Will Permit On Site Inspection By Personnel Selected Without Prior Notice To Insure The Contractor S Equipment Is Operated In Accordance With Appropriate Safety Guidelines And/or Regulations As Applicable. additional Reports/documentation Required By The Successful Contractor Prior To Commencement Of Services Of Both Technologist And Pm/repair Services, Unless Otherwise Stated. This Visn May Require Specialized Documentation To Satisfy The Requirements Of Local State And Federal Government Agencies, And Independent Consultants Such As The Joint Commission On Accreditation For Hospitals, As Well As For Services Rendered Verification For Payment Of Monthly Statement. At A Minimum, The Following Information Will Be Provided To The Contracting Officer: Certificate Of Insurance, Including, But Not Limited To, Professional Liability, Worker S Compensation, Liability And Property Insurance Of Contractor S Furnished Equipment Which Shall Be Submitted To The Administrative Contracting Officer Within Ten (10) Calendar Days Of Receipt Of Notification Of Award. It Is Agreed Upon And Understood That The Visn Will Not Be Held Responsible For Any Damage Or Vandalism, Which May Be Caused To The Contractor S Equipment While On Premises. Copy Of Appropriate Business License Submitted With Proposal. Contractor S Employees Certifications/registrations, Competency Check List And Training Certificates To Be Submitted With Signed Proposal As Defined Herein. Technologists Health Examination Records Of Annual Tb Skin Test And Recent Chest X-ray If There Is A History Of Positive Tb Skin Test. Copies Of Records Shall Be Submitted To The Contracting Officer Prior To Commencement Of Services. Documentation Of Scanner(s) Make, Model, And Year Of Manufacture And Specifications, Plus Brand And Release Number Of Reconstruction Software For Contractor Supplied Independent Interpretation Workstation. Documentation To Be Submitted With Signed Proposal. A Copy Of The Coach Requirements For Parking/space Will Be Submitted With Signed Proposal. Documentation Of A Proposed Schedule Included In The Submission Along With Maximum Throughput Of Proposed System(s) Will Be Submitted With Signed Proposal. Documentation Of The Joint Commission Certification (if Available) Will Be Submitted With Signed Proposal. attachment A potential Areas Of Service main Campus james H Quillen Vamc 99 Sidney St mountain Home, Tn 37684 (gps Location) james H. Quillen Vamc 809 Lamont St johnson City, Tn 37604 also Shared With: lexington Vamc 2250 Leestown Rd lexington, Ky 40511 community Based Outpatient Clinics (cboc): not Limited To As Sites Are Added On Or Removed From Service: norton Va Clinic 654 Highway 58 East Norton, Va 24273 jonesville Va Clinic 32613 Wilderness Road, Suite 101 Jonesville, Va 24263 morristown Va Clinic 925 E. Morris Boulevard Morristown, Tn 37813 campbell County Va Clinic 130 Independence Lane, 3rd Floor Lafollette, Tn 37766 rogersville Va Clinic 401 Scenic Drive Rogersville, Tn 37857 dannie A Carr Va Clinic 1124 Blanton Dr Sevierville, Tn 37862 mountain City Va Clinic 1141 Cold Springs Road Mountain City, Tn 37683 somerset Va Clinic 300 Medpark Dr Somerset, Ky 42503 morehead Va Clinic 333 Beacon Hill Rd Ste. 100 Morehead, Ky 40351 hazard Va Clinic 210 Black Gold Blvd Ste. 107 Hazard, Ky 41701 berea Va Clinic 209 Pauline Dr. Berea, Ky 40403

Details: I Did Want To Ask If This Job Falls Under The Special Contractor Requirement(25-75 Minus Material)? this Job Does Not Fall Under Special Contractor Requirement. It Is A Firm Fixed Price Commercial Service Requirement. i Am Also Wondering If This Is A Prevailing Wage Job And If That Needs To Be Clearly Broken Out In The Quote? the Applicable Wage Determination Is Attached. the Solicitation States That We Must Be Registered In Vista In Order To Be Considered And That We Must Request Enrollment.â  We Would Like To Be Both Considered And Enrolled. please Use The System Located At This Link: Customer Engagement Portal i Have A Question Regarding The Pricing Schedule Included In The Solicitation.  it Seems The Va Has Pre Filled The Unit Pricing. take Item Number 0002, Your Sheet States $12/sf X 300 Sf (round Up).â  Is This Intended To Dictate To Us The Sf Cost Of The Roof? per Your Sheet The Cost Should Be $3,600 The Insulation Should Be ($5.00 X 600sf) $3,000 Etc. the Pricing Listed Is Based Off Our Market Research. clearly There Is Not A Lump Sum Required For The Entire Project.â  Given The Numbers Are We Expected To Add Costs For Safety, Submittal Processing, travel, Etc.?â  there Is A Contingency Line Available To Adjust For Other Costs. i Was Wondering If There Has Been Any Addendum Issued? Any Bid Date Changes Or Is The Due Date Still Tomorrow, March 21?   no Extension, Offers Are Still Due Tomorrow Thursday March 21, 2024 Before 10:00 Am Est. ?.## Price/cost Schedule item Information item Number description Of Supplies/services quantity unit unit Price amount 0001 1.00 jb __________________ __________________ inferred Moisture Scan (based Past Work Performed) contract Period: Base pop Begin: 03-25-2024 pop End: 04-24-2024 0002 1.00 jb __________________ __________________ edpm Roof. $12/sf X 300 Sf (rnd Up) pricing Based Off Market Research contract Period: Base pop Begin: 03-25-2024 pop End: 04-24-2024 0003 1.00 jb __________________ __________________ vapor Barrier $5/sf X 300 Sf pricing Based Off Market Research contract Period: Base pop Begin: 03-25-2024 pop End: 04-24-2024 0004 1.00 jb __________________ __________________ rigid Insulation Repair $5/sf X 600sf (double Layer) pricing Based Off Market Research contract Period: Base pop Begin: 03-25-2024 pop End: 04-24-2024 0005 1.00 jb __________________ __________________ fasteners (box) contract Period: Base pop Begin: 03-25-2024 pop End: 04-24-2024 0006 1.00 jb __________________ __________________ edpm Sealer Tape contract Period: Base pop Begin: 03-25-2024 pop End: 04-24-2024 0007 1.00 jb __________________ __________________ contractor Comprehensive One-year Warranty contract Period: Base pop Begin: 03-25-2024 pop End: 04-24-2024 0008 1.00 jb __________________ __________________ safety contract Period: Base pop Begin: 03-25-2024 pop End: 04-24-2024 0009 1.00 jb __________________ __________________ clean Up contract Period: Base pop Begin: 03-25-2024 pop End: 04-24-2024 0010 1.00 jb __________________ __________________ contingency contract Period: Base pop Begin: 03-25-2024 pop End: 04-24-2024 grand Total __________________ "register Of Wage Determinations Under | U.s. Department Of Labor The Service Contract Act | Employment Standards Administration by Direction Of The Secretary Of Labor | Wage And Hour Division | Washington D.c. 20210 | | | | Wage Determination No.: 2015-4083 daniel W. Simms Division Of | Revision No.: 25 director Wage Determinations| Date Of Last Revision: 12/26/2023 _______________________________________|____________________________________________ note: Contracts Subject To The Service Contract Act Are Generally Required To pay At Least The Applicable Minimum Wage Rate Required Under Executive Order 14026 Or Executive Order 13658. _____________________________________________________________________________________ |if The Contract Is Entered Into On Or |executive Order 14026 Generally Applies To | |after January 30, 2022, Or The |the Contract. | |contract Is Renewed Or Extended (e.g., |the Contractor Must Pay All Covered Workers | |an Option Is Exercised) On Or After |at Least $17.20 Per Hour (or The Applicable | |january 30, 2022: |wage Rate Listed On This Wage Determination,| | |if It Is Higher) For All Hours Spent | | |performing On The Contract In 2024. | ________________________________________|____________________________________________ |if The Contract Was Awarded On Or |executive Order 13658 Generally Applies To | |between January 1, 2015 And January 29,|the Contract. | |2022, And The Contract Is Not Renewed |the Contractor Must Pay All Covered Workers | |or Extended On Or After January 30, |at Least $12.90 Per Hour (or The Applicable | |2022: |wage Rate Listed On This Wage Determination,| | |if It Is Higher) For All Hours Spent | | |performing On The Contract In 2024. | _____________________________________________________________________________________ the Applicable Executive Order Minimum Wage Rate Will Be Adjusted Annually. Additional information On Contractor Requirements And Worker Protections Under The Executive Orders is Available At Www.dol.gov/whd/govcontracts. ____________________________________________________________________________________ this Wage Determination Is Applicable In The Following Cities And Towns In massachusetts And Rhode Island: massachusetts: bristol County: Attleboro, North Attleborough, Rehoboth, Seekonk norfolk County: Plainville worcester County: Blackstone, Millville rhode Island: providence County: Burrillville, Central Falls, Cumberland, Lincoln, North smithfield, Pawtucket, Providence, Smithfield, Woonsocket ____________________________________________________________________________________ **fringe Benefits Required Follow The Occupational Listing** occupation Code - Title Footnote Rate 01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 18.58 01012 - Accounting Clerk Ii 20.87 01013 - Accounting Clerk Iii 23.34 01020 - Administrative Assistant 34.85 01035 - Court Reporter 27.46 01041 - Customer Service Representative I 15.83*** 01042 - Customer Service Representative Ii 17.27 01043 - Customer Service Representative Iii 19.40 01051 - Data Entry Operator I 17.30 01052 - Data Entry Operator Ii 18.88 01060 - Dispatcher, Motor Vehicle 22.67 01070 - Document Preparation Clerk 20.83 01090 - Duplicating Machine Operator 20.83 01111 - General Clerk I 16.74*** 01112 - General Clerk Ii 18.26 01113 - General Clerk Iii 20.51 01120 - Housing Referral Assistant 24.84 01141 - Messenger Courier 18.47 01191 - Order Clerk I 16.74*** 01192 - Order Clerk Ii 18.27 01261 - Personnel Assistant (employment) I 20.04 01262 - Personnel Assistant (employment) Ii 22.42 01263 - Personnel Assistant (employment) Iii 24.99 01270 - Production Control Clerk 27.87 01290 - Rental Clerk 17.26 01300 - Scheduler, Maintenance 19.91 01311 - Secretary I 19.91 01312 - Secretary Ii 22.28 01313 - Secretary Iii 24.84 01320 - Service Order Dispatcher 20.26 01410 - Supply Technician 34.85 01420 - Survey Worker 24.79 01460 - Switchboard Operator/receptionist 17.66 01531 - Travel Clerk I 16.74*** 01532 - Travel Clerk Ii 17.89 01533 - Travel Clerk Iii 18.70 01611 - Word Processor I 18.02 01612 - Word Processor Ii 20.22 01613 - Word Processor Iii 22.62 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 24.43 05010 - Automotive Electrician 21.93 05040 - Automotive Glass Installer 21.06 05070 - Automotive Worker 21.06 05110 - Mobile Equipment Servicer 19.31 05130 - Motor Equipment Metal Mechanic 22.82 05160 - Motor Equipment Metal Worker 21.06 05190 - Motor Vehicle Mechanic 22.82 05220 - Motor Vehicle Mechanic Helper 18.39 05250 - Motor Vehicle Upholstery Worker 20.14 05280 - Motor Vehicle Wrecker 21.06 05310 - Painter, Automotive 21.93 05340 - Radiator Repair Specialist 21.06 05370 - Tire Repairer 17.60 05400 - Transmission Repair Specialist 22.82 07000 - Food Preparation And Service Occupations 07010 - Baker 15.88*** 07041 - Cook I 19.83 07042 - Cook Ii 21.63 07070 - Dishwasher 14.23*** 07130 - Food Service Worker 14.77*** 07210 - Meat Cutter 20.73 07260 - Waiter/waitress 13.74*** 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 21.90 09040 - Furniture Handler 14.75*** 09080 - Furniture Refinisher 20.61 09090 - Furniture Refinisher Helper 17.28 09110 - Furniture Repairer, Minor 18.93 09130 - Upholsterer 21.36 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 15.22*** 11060 - Elevator Operator 15.22*** 11090 - Gardener 23.66 11122 - Housekeeping Aide 16.08*** 11150 - Janitor 16.08*** 11210 - Laborer, Grounds Maintenance 19.23 11240 - Maid Or Houseman 15.48*** 11260 - Pruner 18.19 11270 - Tractor Operator 22.53 11330 - Trail Maintenance Worker 19.23 11360 - Window Cleaner 17.38 12000 - Health Occupations 12010 - Ambulance Driver 20.05 12011 - Breath Alcohol Technician 26.83 12012 - Certified Occupational Therapist Assistant 29.97 12015 - Certified Physical Therapist Assistant 31.81 12020 - Dental Assistant 23.21 12025 - Dental Hygienist 39.68 12030 - Ekg Technician 44.68 12035 - Electroneurodiagnostic Technologist 44.68 12040 - Emergency Medical Technician 20.05 12071 - Licensed Practical Nurse I 23.99 12072 - Licensed Practical Nurse Ii 26.83 12073 - Licensed Practical Nurse Iii 29.91 12100 - Medical Assistant 19.09 12130 - Medical Laboratory Technician 30.81 12160 - Medical Record Clerk 21.20 12190 - Medical Record Technician 24.13 12195 - Medical Transcriptionist 21.46 12210 - Nuclear Medicine Technologist 49.59 12221 - Nursing Assistant I 14.40*** 12222 - Nursing Assistant Ii 16.18*** 12223 - Nursing Assistant Iii 17.66 12224 - Nursing Assistant Iv 19.83 12235 - Optical Dispenser 27.44 12236 - Optical Technician 20.00 12250 - Pharmacy Technician 18.72 12280 - Phlebotomist 20.46 12305 - Radiologic Technologist 37.13 12311 - Registered Nurse I 29.78 12312 - Registered Nurse Ii 34.81 12313 - Registered Nurse Ii, Specialist 34.81 12314 - Registered Nurse Iii 40.76 12315 - Registered Nurse Iii, Anesthetist 40.76 12316 - Registered Nurse Iv 48.86 12317 - Scheduler (drug And Alcohol Testing) 33.25 12320 - Substance Abuse Treatment Counselor 25.72 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 24.83 13012 - Exhibits Specialist Ii 30.78 13013 - Exhibits Specialist Iii 37.64 13041 - Illustrator I 24.83 13042 - Illustrator Ii 30.78 13043 - Illustrator Iii 37.64 13047 - Librarian 34.08 13050 - Library Aide/clerk 15.46*** 13054 - Library Information Technology Systems 30.78 Administrator 13058 - Library Technician 24.64 13061 - Media Specialist I 22.21 13062 - Media Specialist Ii 24.83 13063 - Media Specialist Iii 27.69 13071 - Photographer I 20.21 13072 - Photographer Ii 22.61 13073 - Photographer Iii 28.01 13074 - Photographer Iv 34.26 13075 - Photographer V 41.44 13090 - Technical Order Library Clerk 19.42 13110 - Video Teleconference Technician 24.56 14000 - Information Technology Occupations 14041 - Computer Operator I 19.89 14042 - Computer Operator Ii 22.24 14043 - Computer Operator Iii 24.79 14044 - Computer Operator Iv 27.56 14045 - Computer Operator V 30.51 14071 - Computer Programmer I (see 1) 22.53 14072 - Computer Programmer Ii (see 1) 14073 - Computer Programmer Iii (see 1) 14074 - Computer Programmer Iv (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst Ii (see 1) 14103 - Computer Systems Analyst Iii (see 1) 14150 - Peripheral Equipment Operator 19.89 14160 - Personal Computer Support Technician 28.05 14170 - System Support Specialist 30.51 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (non-rated) 33.92 15020 - Aircrew Training Devices Instructor (rated) 41.04 15030 - Air Crew Training Devices Instructor (pilot) 49.20 15050 - Computer Based Training Specialist / Instructor 33.92 15060 - Educational Technologist 30.39 15070 - Flight Instructor (pilot) 49.20 15080 - Graphic Artist 30.85 15085 - Maintenance Test Pilot, Fixed, Jet/prop 49.20 15086 - Maintenance Test Pilot, Rotary Wing 49.20 15088 - Non-maintenance Test/co-pilot 49.20 15090 - Technical Instructor 29.89 15095 - Technical Instructor/course Developer 36.56 15110 - Test Proctor 24.12 15120 - Tutor 24.12 16000 - Laundry, Dry-cleaning, Pressing And Related Occupations 16010 - Assembler 16.41*** 16030 - Counter Attendant 16.41*** 16040 - Dry Cleaner 18.75 16070 - Finisher, Flatwork, Machine 16.41*** 16090 - Presser, Hand 16.41*** 16110 - Presser, Machine, Drycleaning 16.41*** 16130 - Presser, Machine, Shirts 16.41*** 16160 - Presser, Machine, Wearing Apparel, Laundry 16.41*** 16190 - Sewing Machine Operator 19.53 16220 - Tailor 20.31 16250 - Washer, Machine 17.19*** 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-tool Operator (tool Room) 25.99 19040 - Tool And Die Maker 30.25 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 20.65 21030 - Material Coordinator 27.87 21040 - Material Expediter 27.87 21050 - Material Handling Laborer 17.05*** 21071 - Order Filler 16.14*** 21080 - Production Line Worker (food Processing) 20.65 21110 - Shipping Packer 18.65 21130 - Shipping/receiving Clerk 18.65 21140 - Store Worker I 16.40*** 21150 - Stock Clerk 19.76 21210 - Tools And Parts Attendant 20.65 21410 - Warehouse Specialist 20.65 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 37.65 23019 - Aircraft Logs And Records Technician 32.02 23021 - Aircraft Mechanic I 36.29 23022 - Aircraft Mechanic Ii 37.65 23023 - Aircraft Mechanic Iii 39.10 23040 - Aircraft Mechanic Helper 29.24 23050 - Aircraft, Painter 34.87 23060 - Aircraft Servicer 32.02 23070 - Aircraft Survival Flight Equipment Technician 34.87 23080 - Aircraft Worker 33.47 23091 - Aircrew Life Support Equipment (alse) Mechanic 33.47 I 23092 - Aircrew Life Support Equipment (alse) Mechanic 36.29 Ii 23110 - Appliance Mechanic 25.25 23120 - Bicycle Repairer 20.52 23125 - Cable Splicer 48.07 23130 - Carpenter, Maintenance 28.00 23140 - Carpet Layer 28.76 23160 - Electrician, Maintenance 30.23 23181 - Electronics Technician Maintenance I 30.12 23182 - Electronics Technician Maintenance Ii 31.37 23183 - Electronics Technician Maintenance Iii 32.67 23260 - Fabric Worker 28.63 23290 - Fire Alarm System Mechanic 23.68 23310 - Fire Extinguisher Repairer 27.44 23311 - Fuel Distribution System Mechanic 37.56 23312 - Fuel Distribution System Operator 31.78 23370 - General Maintenance Worker 23.50 23380 - Ground Support Equipment Mechanic 36.29 23381 - Ground Support Equipment Servicer 32.02 23382 - Ground Support Equipment Worker 33.47 23391 - Gunsmith I 27.44 23392 - Gunsmith Ii 29.93 23393 - Gunsmith Iii 32.43 23410 - Heating, Ventilation And Air-conditioning 29.61 Mechanic 23411 - Heating, Ventilation And Air Contidioning 30.74 Mechanic (research Facility) 23430 - Heavy Equipment Mechanic 30.05 23440 - Heavy Equipment Operator 30.34 23460 - Instrument Mechanic 32.43 23465 - Laboratory/shelter Mechanic 31.18 23470 - Laborer 17.05*** 23510 - Locksmith 31.58 23530 - Machinery Maintenance Mechanic 28.96 23550 - Machinist, Maintenance 24.75 23580 - Maintenance Trades Helper 19.77 23591 - Metrology Technician I 32.43 23592 - Metrology Technician Ii 33.67 23593 - Metrology Technician Iii 34.97 23640 - Millwright 33.22 23710 - Office Appliance Repairer 25.62 23760 - Painter, Maintenance 22.68 23790 - Pipefitter, Maintenance 32.90 23810 - Plumber, Maintenance 31.63 23820 - Pneudraulic Systems Mechanic 32.43 23850 - Rigger 31.48 23870 - Scale Mechanic 29.93 23890 - Sheet-metal Worker, Maintenance 30.15 23910 - Small Engine Mechanic 22.57 23931 - Telecommunications Mechanic I 38.43 23932 - Telecommunications Mechanic Ii 39.90 23950 - Telephone Lineman 45.95 23960 - Welder, Combination, Maintenance 27.00 23965 - Well Driller 32.43 23970 - Woodcraft Worker 32.43 23980 - Woodworker 27.44 24000 - Personal Needs Occupations 24550 - Case Manager 18.35 24570 - Child Care Attendant 14.25*** 24580 - Child Care Center Clerk 17.77 24610 - Chore Aide 16.07*** 24620 - Family Readiness And Support Services 18.35 Coordinator 24630 - Homemaker 18.35 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 29.40 25040 - Sewage Plant Operator 27.98 25070 - Stationary Engineer 29.40 25190 - Ventilation Equipment Tender 23.69 25210 - Water Treatment Plant Operator 27.98 27000 - Protective Service Occupations 27004 - Alarm Monitor 23.45 27007 - Baggage Inspector 16.90*** 27008 - Corrections Officer 35.68 27010 - Court Security Officer 32.37 27030 - Detection Dog Handler 18.90 27040 - Detention Officer 35.68 27070 - Firefighter 30.25 27101 - Guard I 16.90*** 27102 - Guard Ii 18.90 27131 - Police Officer I 28.53 27132 - Police Officer Ii 31.72 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 17.39 28042 - Carnival Equipment Repairer 18.26 28043 - Carnival Worker 13.62*** 28210 - Gate Attendant/gate Tender 19.39 28310 - Lifeguard 14.29*** 28350 - Park Attendant (aide) 21.68 28510 - Recreation Aide/health Facility Attendant 15.82*** 28515 - Recreation Specialist 26.15 28630 - Sports Official 17.26 28690 - Swimming Pool Operator 19.91 29000 - Stevedoring/longshoremen Occupational Services 29010 - Blocker And Bracer 28.84 29020 - Hatch Tender 28.84 29030 - Line Handler 28.84 29041 - Stevedore I 27.58 29042 - Stevedore Ii 30.04 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (hfo) (see 2) 48.44 30011 - Air Traffic Control Specialist, Station (hfo) (see 2) 33.40 30012 - Air Traffic Control Specialist, Terminal (hfo) (see 2) 36.78 30021 - Archeological Technician I 18.88 30022 - Archeological Technician Ii 21.12 30023 - Archeological Technician Iii 26.17 30030 - Cartographic Technician 26.17 30040 - Civil Engineering Technician 26.06 30051 - Cryogenic Technician I 28.98 30052 - Cryogenic Technician Ii 32.02 30061 - Drafter/cad Operator I 18.88 30062 - Drafter/cad Operator Ii 21.12 30063 - Drafter/cad Operator Iii 23.55 30064 - Drafter/cad Operator Iv 28.98 30081 - Engineering Technician I 18.85 30082 - Engineering Technician Ii 21.15 30083 - Engineering Technician Iii 23.66 30084 - Engineering Technician Iv 29.32 30085 - Engineering Technician V 35.87 30086 - Engineering Technician Vi 43.38 30090 - Environmental Technician 31.01 30095 - Evidence Control Specialist 26.17 30210 - Laboratory Technician 23.62 30221 - Latent Fingerprint Technician I 28.98 30222 - Latent Fingerprint Technician Ii 32.02 30240 - Mathematical Technician 27.65 30361 - Paralegal/legal Assistant I 22.72 30362 - Paralegal/legal Assistant Ii 28.15 30363 - Paralegal/legal Assistant Iii 34.43 30364 - Paralegal/legal Assistant Iv 41.65 30375 - Petroleum Supply Specialist 32.02 30390 - Photo-optics Technician 26.17 30395 - Radiation Control Technician 32.02 30461 - Technical Writer I 27.40 30462 - Technical Writer Ii 33.52 30463 - Technical Writer Iii 40.56 30491 - Unexploded Ordnance (uxo) Technician I 30.79 30492 - Unexploded Ordnance (uxo) Technician Ii 37.25 30493 - Unexploded Ordnance (uxo) Technician Iii 44.65 30494 - Unexploded (uxo) Safety Escort 30.79 30495 - Unexploded (uxo) Sweep Personnel 30.79 30501 - Weather Forecaster I 28.98 30502 - Weather Forecaster Ii 35.25 30620 - Weather Observer, Combined Upper Air Or (see 2) 24.04 Surface Programs 30621 - Weather Observer, Senior (see 2) 26.17 31000 - Transportation/mobile Equipment Operation Occupations 31010 - Airplane Pilot 37.25 31020 - Bus Aide 15.91*** 31030 - Bus Driver 20.42 31043 - Driver Courier 19.04 31260 - Parking And Lot Attendant 15.00*** 31290 - Shuttle Bus Driver 17.73 31310 - Taxi Driver 15.90*** 31361 - Truckdriver, Light 20.00 31362 - Truckdriver, Medium 20.87 31363 - Truckdriver, Heavy 26.37 31364 - Truckdriver, Tractor-trailer 26.37 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 18.16 99030 - Cashier 14.25*** 99050 - Desk Clerk 14.64*** 99095 - Embalmer 37.72 99130 - Flight Follower 30.79 99251 - Laboratory Animal Caretaker I 18.78 99252 - Laboratory Animal Caretaker Ii 19.72 99260 - Marketing Analyst 32.51 99310 - Mortician 38.43 99410 - Pest Controller 20.23 99510 - Photofinishing Worker 16.18*** 99710 - Recycling Laborer 23.47 99711 - Recycling Specialist 26.92 99730 - Refuse Collector 21.51 99810 - Sales Clerk 15.17*** 99820 - School Crossing Guard 18.18 99830 - Survey Party Chief 31.29 99831 - Surveying Aide 22.40 99832 - Surveying Technician 29.85 99840 - Vending Machine Attendant 20.71 99841 - Vending Machine Repairer 23.72 99842 - Vending Machine Repairer Helper 20.71 ***workers In This Classification May Be Entitled To A Higher Minimum Wage Under executive Order 14026 ($17.20 Per Hour) Or 13658 ($12.90 Per Hour). Please See The note At The Top Of The Wage Determination For More Information. Please Also Note that The Minimum Wage Requirements Of Executive Order 14026 And 13658 Are Not currently Being Enforced As To Contracts Or Contract-like Instruments Entered Into with The Federal Government In Connection With Seasonal Recreational Services Or seasonal Recreational Equipment Rental For The General Public On Federal Lands. The minimum Wage Requirements Of Executive Order 14026 Also Are Not Currently Being enforced As To Any Contract Or Subcontract To Which The States Of Texas, Louisiana, or Mississippi, Including Their Agencies, Are A Party. ____________________________________________________________________________________ note: Executive Order (eo) 13706, Establishing Paid Sick Leave For Federal contractors, Applies To All Contracts Subject To The Service Contract Act For Which the Contract Is Awarded (and Any Solicitation Was Issued) On Or After January 1, 2017. If This Contract Is Covered By The Eo, The Contractor Must Provide Employees with 1 Hour Of Paid Sick Leave For Every 30 Hours They Work, Up To 56 Hours Of Paid sick Leave Each Year. Employees Must Be Permitted To Use Paid Sick Leave For Their own Illness, Injury Or Other Health-related Needs, Including Preventive Care; To assist A Family Member (or Person Who Is Like Family To The Employee) Who Is Ill, injured, Or Has Other Health-related Needs, Including Preventive Care; Or For reasons Resulting From, Or To Assist A Family Member (or Person Who Is Like Family to The Employee) Who Is The Victim Of, Domestic Violence, Sexual Assault, Or stalking. Additional Information On Contractor Requirements And Worker Protections under The Eo Is Available At Www.dol.gov/whd/govcontracts. all Occupations Listed Above Receive The Following Benefits: health & Welfare: $4.98 Per Hour, Up To 40 Hours Per Week, Or $199.20 Per Week Or $863.20 Per Month health & Welfare Eo 13706: $4.57 Per Hour, Up To 40 Hours Per Week, Or $182.80 Per week, Or $792.13 Per Month* *this Rate Is To Be Used Only When Compensating Employees For Performance On An Sca- covered Contract Also Covered By Eo 13706, Establishing Paid Sick Leave For Federal contractors. A Contractor May Not Receive Credit Toward Its Sca Obligations For Any paid Sick Leave Provided Pursuant To Eo 13706. vacation: 2 Weeks Paid Vacation After 1 Year Of Service With A Contractor Or successor, 3 Weeks After 10 Years, And 4 Weeks After 15 Years. Length Of Service includes The Whole Span Of Continuous Service With The Present Contractor Or successor, Wherever Employed, And With The Predecessor Contractors In The performance Of Similar Work At The Same Federal Facility. (see 29 Cfr 4.173) holidays: A Minimum Of Twelve Paid Holidays Per Year: New Year's Day, Martin luther King Jr's Birthday, Washington's Birthday, Good Friday, Memorial Day, juneteenth National Independence Day, Independence Day, Labor Day, Columbus Day, veterans' Day, Thanksgiving Day, And Christmas Day. A Contractor May Substitute for Any Of The Named Holidays Another Day Off With Pay In Accordance With A Plan communicated To The Employees Involved.) (see 29 Cfr 4.174) the Occupations Which Have Numbered Footnotes In Parentheses Receive The Following: 1) Computer Employees: This Wage Determination Does Not Apply To Any Individual employed In A Bona Fide Executive, Administrative, Or Professional Capacity, As defined In 29 C.f.r. Part 541. (see 41 C.f.r. 6701(3)). Because Most Computer systems Analysts And Computer Programmers Who Are Paid At Least $27.63 Per Hour (or at Least $684 Per Week If Paid On A Salary Or Fee Basis) Likely Qualify As Exempt computer Professionals Under 29 U.s.c. 213(a)(1) And 29 U.s.c. 213(a)(17), This Wage determination May Not Include Wage Rates For All Occupations Within Those Job families. In Such Instances, A Conformance Will Be Necessary If There Are Nonexempt employees In These Job Families Working On The Contract. job Titles Vary Widely And Change Quickly In The Computer Industry, And Are Not determinative Of Whether An Employee Is An Exempt Computer Professional. To Be exempt, Computer Employees Who Satisfy The Compensation Requirements Must Also Have a Primary Duty That Consists Of: (1) The Application Of Systems Analysis Techniques And Procedures, Including consulting With Users, To Determine Hardware, Software Or System Functional specifications; (2) The Design, Development, Documentation, Analysis, Creation, Testing Or modification Of Computer Systems Or Programs, Including Prototypes, Based On And related To User Or System Design Specifications; (3) The Design, Documentation, Testing, Creation Or Modification Of Computer programs Related To Machine Operating Systems; Or (4) A Combination Of The Aforementioned Duties, The Performance Of Which requires The Same Level Of Skills. (29 C.f.r. 541.400). any Computer Employee Who Meets The Applicable Compensation Requirements And The above Duties Test Qualifies As An Exempt Computer Professional Under Both Section 13(a)(1) And Section 13(a)(17) Of The Fair Labor Standards Act. (field Assistance bulletin No. 2006-3 (dec. 14, 2006)). Accordingly, This Wage Determination Will Not apply To Any Exempt Computer Employee Regardless Of Which Of These Two Exemptions Is utilized. 2) Air Traffic Controllers And Weather Observers - Night Pay & Sunday Pay: If You work At Night As Part Of A Regular Tour Of Duty, You Will Earn A Night Differential and Receive An Additional 10% Of Basic Pay For Any Hours Worked Between 6pm And 6am. If You Are A Full-time Employed (40 Hours A Week) And Sunday Is Part Of Your regularly Scheduled Workweek, You Are Paid At Your Rate Of Basic Pay Plus A Sunday premium Of 25% Of Your Basic Rate For Each Hour Of Sunday Work Which Is Not Overtime (i.e. Occasional Work On Sunday Outside The Normal Tour Of Duty Is Considered overtime Work). ** Hazardous Pay Differential ** an 8 Percent Differential Is Applicable To Employees Employed In A Position That represents A High Degree Of Hazard When Working With Or In Close Proximity To ordnance, Explosives, And Incendiary Materials. This Includes Work Such As screening, Blending, Dying, Mixing, And Pressing Of Sensitive Ordnance, Explosives, and Pyrotechnic Compositions Such As Lead Azide, Black Powder And Photoflash Powder. All Dry-house Activities Involving Propellants Or Explosives. Demilitarization, modification, Renovation, Demolition, And Maintenance Operations On Sensitive ordnance, Explosives And Incendiary Materials. All Operations Involving Re-grading and Cleaning Of Artillery Ranges. a 4 Percent Differential Is Applicable To Employees Employed In A Position That represents A Low Degree Of Hazard When Working With, Or In Close Proximity To ordnance, (or Employees Possibly Adjacent To) Explosives And Incendiary Materials which Involves Potential Injury Such As Laceration Of Hands, Face, Or Arms Of The employee Engaged In The Operation, Irritation Of The Skin, Minor Burns And The Like; minimal Damage To Immediate Or Adjacent Work Area Or Equipment Being Used. All operations Involving, Unloading, Storage, And Hauling Of Ordnance, Explosive, And incendiary Ordnance Material Other Than Small Arms Ammunition. These Differentials are Only Applicable To Work That Has Been Specifically Designated By The Agency For ordnance, Explosives, And Incendiary Material Differential Pay. ** Uniform Allowance ** if Employees Are Required To Wear Uniforms In The Performance Of This Contract (either By The Terms Of The Government Contract, By The Employer, By The State Or local Law, Etc.), The Cost Of Furnishing Such Uniforms And Maintaining (by laundering Or Dry Cleaning) Such Uniforms Is An Expense That May Not Be Borne By An employee Where Such Cost Reduces The Hourly Rate Below That Required By The Wage determination. The Department Of Labor Will Accept Payment In Accordance With The following Standards As Compliance: the Contractor Or Subcontractor Is Required To Furnish All Employees With An adequate Number Of Uniforms Without Cost Or To Reimburse Employees For The Actual cost Of The Uniforms. In Addition, Where Uniform Cleaning And Maintenance Is Made the Responsibility Of The Employee, All Contractors And Subcontractors Subject To this Wage Determination Shall (in The Absence Of A Bona Fide Collective Bargaining agreement Providing For A Different Amount, Or The Furnishing Of Contrary affirmative Proof As To The Actual Cost), Reimburse All Employees For Such Cleaning and Maintenance At A Rate Of $3.35 Per Week (or $.67 Cents Per Day). However, In those Instances Where The Uniforms Furnished Are Made Of ""wash And Wear"" materials, May Be Routinely Washed And Dried With Other Personal Garments, And Do not Require Any Special Treatment Such As Dry Cleaning, Daily Washing, Or Commercial laundering In Order To Meet The Cleanliness Or Appearance Standards Set By The Terms of The Government Contract, By The Contractor, By Law, Or By The Nature Of The Work, there Is No Requirement That Employees Be Reimbursed For Uniform Maintenance Costs. ** Service Contract Act Directory Of Occupations ** the Duties Of Employees Under Job Titles Listed Are Those Described In The ""service Contract Act Directory Of Occupations"", Fifth Edition (revision 1), dated September 2015, Unless Otherwise Indicated. ** Request For Authorization Of Additional Classification And Wage Rate, Standard form 1444 (sf-1444) ** conformance Process: the Contracting Officer Shall Require That Any Class Of Service Employee Which Is not Listed Herein And Which Is To Be Employed Under The Contract (i.e., The Work To be Performed Is Not Performed By Any Classification Listed In The Wage determination), Be Classified By The Contractor So As To Provide A Reasonable relationship (i.e., Appropriate Level Of Skill Comparison) Between Such Unlisted classifications And The Classifications Listed In The Wage Determination (see 29 Cfr 4.6(b)(2)(i)). Such Conforming Procedures Shall Be Initiated By The Contractor prior To The Performance Of Contract Work By Such Unlisted Class(es) Of Employees (see 29 Cfr 4.6(b)(2)(ii)). The Wage And Hour Division Shall Make A Final determination Of Conformed Classification, Wage Rate, And/or Fringe Benefits Which shall Be Paid To All Employees Performing In The Classification From The First Day of Work On Which Contract Work Is Performed By Them In The Classification. Failure to Pay Such Unlisted Employees The Compensation Agreed Upon By The Interested parties And/or Fully Determined By The Wage And Hour Division Retroactive To The date Such Class Of Employees Commenced Contract Work Shall Be A Violation Of The Act and This Contract. (see 29 Cfr 4.6(b)(2)(v)). When Multiple Wage Determinations Are included In A Contract, A Separate Sf-1444 Should Be Prepared For Each Wage determination To Which A Class(es) Is To Be Conformed. the Process For Preparing A Conformance Request Is As Follows: 1) When Preparing The Bid, The Contractor Identifies The Need For A Conformed occupation(s) And Computes A Proposed Rate(s). 2) After Contract Award, The Contractor Prepares A Written Report Listing In Order the Proposed Classification Title(s), A Federal Grade Equivalency (fge) For Each proposed Classification(s), Job Description(s), And Rationale For Proposed Wage rate(s), Including Information Regarding The Agreement Or Disagreement Of The authorized Representative Of The Employees Involved, Or Where There Is No Authorized representative, The Employees Themselves. This Report Should Be Submitted To The contracting Officer No Later Than 30 Days After Such Unlisted Class(es) Of Employees performs Any Contract Work. 3) The Contracting Officer Reviews The Proposed Action And Promptly Submits A Report of The Action, Together With The Agency's Recommendations And Pertinent information Including The Position Of The Contractor And The Employees, To The U.s. department Of Labor, Wage And Hour Division, For Review (see 29 Cfr 4.6(b)(2)(ii)). 4) Within 30 Days Of Receipt, The Wage And Hour Division Approves, Modifies, Or disapproves The Action Via Transmittal To The Agency Contracting Officer, Or notifies The Contracting Officer That Additional Time Will Be Required To Process the Request. 5) The Contracting Officer Transmits The Wage And Hour Division's Decision To The contractor. 6) Each Affected Employee Shall Be Furnished By The Contractor With A Written Copy of Such Determination Or It Shall Be Posted As A Part Of The Wage Determination (see 29 Cfr 4.6(b)(2)(iii)). information Required By The Regulations Must Be Submitted On Sf-1444 Or Bond Paper. when Preparing A Conformance Request, The ""service Contract Act Directory Of occupations"" Should Be Used To Compare Job Definitions To Ensure That Duties requested Are Not Performed By A Classification Already Listed In The Wage determination. Remember, It Is Not The Job Title, But The Required Tasks That determine Whether A Class Is Included In An Established Wage Determination. conformances May Not Be Used To Artificially Split, Combine, Or Subdivide classifications Listed In The Wage Determination (see 29 Cfr 4.152(c)(1))."

Details: Description 1 (advanced Mandarin Language Course)/ Christopher Robert G. Go. /2022 Copies 1 2 21st Century Risk Management With Sanitation/ Mylene Castillo-dela Cruz & Anabelle Ocampo -blas/2023 Copies 2 3 21st Ed. Computer Concepts, / Parson/ 2023 Copies 1 4 2nd Ed. Data In Mix Method Research / D. Watkins Copies 1 5 2nd Organization And Administration In Sports / 3g E. /2023 Copies 1 6 3g E. Collection On Business Managing Customer Exp, & Relationship / 3ge. / 2023 Copies 1 7 3g Handy Guide: Agile Project Management, 2nd Ed. / 3g.e./ 2023 Copies 1 8 3ge Collection On Agriculture: An Introduction To Permaculture (hb)/margas, N. /2024 Copies 1 9 3ge Collection On Agriculture: Nanotechnology And Plant Science (hb)/nike Walter/2024 Copies 1 10 3ge Collection On Agriculture: Omics Technologies For Sustainable Agriculture (hb)/nicole Meinersen-schmidt/2024 Copies 1 11 3ge Collection On Agriculture: Solar Irrigation System (hb)/3g Editorial Board/2022 Copies 1 12 3ge Collection On Agriplant Pathogen Res. Boitech./ 3g E./ Copies 1 13 3ge Collection On Mathematics: Boundary Value Problems / 3g E-learning/2023 Copies 1 14 3ge Collection On Mathematics: Chaos Theory And Its Application / 3g E-learning/2023 Copies 1 15 3ge Collection On Mathematics: Fuzzy Mathematics / 3g E-learning/2022 Copies 1 16 3ge. Collection On Business Management: Service Marketing /3g. E/ 2023 Copies 1 17 4th Ed. Investigating Oceanography / K. Severdrup / 2024 Copies 1 18 50 Hand - On Advance Literacy Strategies For Your Learners / A. Bemiss Copies 1 19 A Course Module For Child And Adolescent Learners And Learning Principles/mingoa,et.al/2021 Copies 1 20 A Course Module For Child Development/del Rosario,et.al/2021 Copies 1 21 A Course Module For Ethics/bulaong,et,al/2021 Copies 1 22 A Course Module For Foundations Of Early Childhood Education/macan,et,al/2021 Copies 1 23 A Course Module For Inclusive Education In Early Childhood Settings/atos-yuzon,et.al/2021 Copies 1 24 A Course Module For Language Programs And Policies In Multilingual Societies/lim, J/pawilen, G/2021 Copies 2 25 A Course Module For National Service Training Program (nstp I) 1e/ferrer,et.al/2023 Copies 1 26 A Course Module For National Service Training Program (nstp Ii) 1e/ferrer,et.al/2023 Copies 1 27 A Course Module For Personhood Education: Curriculum, Pedagogy And Assessment/bencando,et.al/2020 Copies 1 28 A Course Module For Teaching English In The Elementary Grades (language Arts)/reyes, R,2021 Copies 1 29 A Course Module For Teaching Internship/reyes, Et.al/2021 Copies 1 30 A Course Module For Teaching Learners With Developmental Disabilities/manuel,et.al /2021 Copies 1 31 A Course Module For Teaching Learners With Sensory And Physical Disabilities/manuel,et.al/2021 Copies 1 32 A Course Module For Teaching Literacy In The Elementary Grades Through Literature/bulusan,et.al/2021 Copies 1 33 A Course Module For Teaching Math In The Intermediate Grades/gusano,et,al/2020 Copies 1 34 A Course Module For Teaching Math In The Primary Grades/gusano, Et, Al/2020 Copies 1 35 A Course Module For Teaching Music In Elementary Schools/roldan/pawilen/2021 Copies 1 36 A Course Module For Teaching Physical Education And Health In The Elementary Grades/rosario, Et, Al/2021 Copies 1 37 A Course Module For Teaching Science In Primary Grades (biology And Chemistry)/mingoa, Et.al/2021 Copies 1 38 A Course Module For Teaching Social Studies In The Elementary Grades (phil. History And Government)/andres,et.al/2020 Copies 1 39 A Course Module For Teaching Strategies For Elementary Science (physics, Earth, And Space Science)/alata, E /2020 Copies 1 40 A Course Module For Technology For Teaching And Learning /alata-bruza,et.al/2021 Copies 1 41 A Course Module For Understanding Gifted And Talented Learners/pawilen & Roldan/2021 Copies 2 42 A Course Module Teaching Math In The Intermediate Grade/riza C. Gusano Et.,al./2022 Copies 1 43 A Critical Guide To Evidence-informed Education / Perry, Thomas / 2023 Copies 1 44 A First Course In Algebraic Geometry / F. Flamini. / 2023 Copies 1 45 A Handbook Of Livestock Management Techniques/ruhela, A./2019 Copies 1 46 A Modular Approach In Advanced Writing / Pagalilauan / 2023 Copies 1 47 A Textbook Of Matrices And Trigonometry / Choi/2024 Copies 1 48 A Visual Reference To Guest Service 2nd Ed./ 3g E. / 2023 Copies 1 49 A Visual Reference To Room Service Management / 3g E. / 2023 Copies 1 50 Abstract Algebra / Germer/2024 Copies 1 51 Accommodation Operations And Management / Medalye, I./2024 Copies 1 52 Active Games For Children On The Autism Spectrum / Bennett, Erin / 2024 Copies 1 53 Adapted Physical Activity Across The Life Span / Leitschuh, Carol Ann / 2024 Copies 1 54 Addressing Tensions & Dilemmas In Inclusive Education \2ed: Resolving Democratically / Norwich, Brahm / 2024 Copies 1 55 Adorable Knitted Animals: Cute Stuffed Toys To Knit The Japanese Way / Ibuki, Hiroko / 2021 Copies 1 56 Advance Hotel Industry & Tourism / S.k Sign /2023 Copies 1 57 Advance Human Resource Management For Private And Government Institutions/marmelo V. Abante Et.al/2024 Copies 1 58 Advanced Database Systems / Ahmed/2024 Copies 1 59 Advanced Molecular Biology (hb)/sharma, S. /2023 Copies 1 60 Advanced Statistic / Khan/2023 Copies 1 61 Advanced Techniques In Molecular Biotechnology / Mitchell/2024 Copies 1 62 Advances In Milk Production And Dairy Technology /goff, Douglas Copies 1 63 Advances In Operational Researches (hb)/pehcevski, J./2022 Copies 1 64 Agricultural Finance/jain, N.k/2022 Copies 1 65 Agricultural Research And Productivity Growth/ Darrick Wilderman/ 2022 Copies 1 66 Agricultural Science And Engineering (hb)/mehta, R. /2023 Copies 1 67 Agricultural Science Principles & Practices. / J.benson /2022 Copies 1 68 Agriculture Biotechnology, A. O Corner / 2020 Copies 1 69 Agriculture Microbiology 3rd Edition / Rao/2023 Copies 1 70 Agritourism / Medalye, I. /2024 Copies 2 71 Agroforestry Natural Resources Sustainability, Livelihood And Climate Moderation / Choda/2023 Copies 1 72 Algorithms Design And Analysis / Collins/2024 Copies 1 73 Alternative Farming Techniques In Sustainable Agriculture / Kinsey/2024 Copies 1 74 An Eye For Art Appreciation: Perception And Expression 2e/sonsona,et.al/2024 Copies 3 75 An Introduction To Health, Physical Education And Sports / Thrall/2024 Copies 1 76 An Introduction To Linear Algebra And Analytical Geometry / Wolff/2024 Copies 1 77 An Introduction To Ordinary Differential Equations With Applications / Hardy/2024 Copies 1 78 An Introduction To Statistics And Analytical Geometry / A. Pickover/2024 Copies 1 79 An Introduction To Topology / Tanton /2024 Copies 1 80 An Introductory To Sports And Physical Education / D. Farrar/2024 Copies 1 81 An Overview Of Graphics And Animation In Computer / Huges/2024 Copies 1 82 An Overview Of Soft Skills And Personality Development / H. Olander/2024 Copies 1 83 An Understanding Of Architecture In Computer And Parallel Processing / Marques/2024 Copies 1 84 An Understanding To Data Communication And Computer Networks / A. Das/2024 Copies 2 85 Analytical Geometric Approach To Static Systems / Moore/2024 Copies 1 86 Analytical Study Of Audio-visual Aids In Education / Brooke/2024 Copies 1 87 Analytical Techniques In Animal Nutrition/mandal, A. Et. Al./2018 Copies 1 88 Analyzing Education Policy Theory And Method / Stacey, Meghan / 2024 Copies 2 89 Animal Diseases Control And Treatment (hb)/sharma, S./2023 Copies 1 90 Animal Feeding And Production (hb)/sharma, S./2022 Copies 1 91 Animal Physiology & Morphology / S. Morales, / 2023 Copies 1 92 Animal Sensitivity And Behavior (hb)/singh, V.k./2023 Copies 1 93 Ap Calculus Ab 2024 Elite Student Edition: 5 Steps To A5 / Ma, William / 2023 Copies 2 94 Ap Calculus Bc 2024 Elite Student Edition: 5 Steps To A5 / Ma, William Copies 1 95 Ap Chemistry 2024 Elite Student Edition: 5 Steps To A5 / Moore, John T. Copies 1 96 Ap Human Geography 2024 Elite Student Edition 2024 / Gillespie, Carol Ann / 2023 Copies 1 97 Ap Physics 1: Algebra-based 2024: 5 Steps To A5 / Jacobs, Greg Copies 1 98 Ap Physics 2: Algebra-based 2024: 5 Steps To A5 / Bruhn, Christopher Copies 1 99 Ap Physics C 2024 Elite Student Edition: 5 Steps To A5 / Jacobs, Greg Copies 1 100 Ap Psychology 2024 Elite Student Edition: 5 Steps To A5 / Maitland, Laura Lincoln / 2024 Copies 1 101 Ap Statistics 2024 Elite Student Edition: 5 Steps To A5 / Derksen, Jared Copies 1 102 Apiculture (hb)/wafullah, N. & Munene, K. /2024 Copies 1 103 Application In Food, Medicine And Industry / Morales / 2023 Copies 1 104 Application Of Biotechnological Techniques In Horticulture C / Hatfield, Edward / 2024 Copies 1 105 Application Of R In Non-parametric Statistical Methods / M. Sebert/2024 Copies 1 106 Applications Of Biotechnologies In Forestry Sector / Corbin, Hugh / 2024 Copies 1 107 Applied Biotechnology For Improved Fruit Crop / Barnard, Allen / 2024 Copies 1 108 Applied Business Tools And Technologies In Hotel And Restaurant Management/ Gonzalo & Obong/2023 Copies 2 109 Applied Business Tools And Technologies In Tourism And Hospitality Industry: 2nd Edition/ Saycip J., /2022 Copies 1 110 Archival & Secondary Data, / T. Chadola./ 2021 Copies 1 111 Art And Science Of Language Teaching, The / Bryfonski, Lara / 2024 Copies 2 112 Art Appreciation 2e/sanchez,et.al/2023 Copies 3 113 Art Appreciation 2e/solmerano/2023 Copies 3 114 Art Appreciation/katherine Grace Jose-gravela/2023 Copies 2 115 Art Appreciation/roldan A.p/2019 Copies 2 116 Aspects Of Soil And Agricultural Microbiology / Harrison, David / 2024 Copies 1 117 Aspects Of Technical Development And Educational Technology / Stewart/2024 Copies 1 118 Assessing Quality And Safety Of Animal Feeds / O'connell, H. /2021 Copies 1 119 Assessment In Learning 2: Authentic Assessment/corpuz/2021 Copies 1 120 Assessment Learning 1/david/2020 Copies 1 121 Assessment Learning 2/david/2020 Copies 1 122 Assessment Of Learning 1/manas,j./2024 Copies 1 123 Automotive Classes/ S. Kumar / 2022 Copies 1 124 Bakery And Confectionary Technology / Kuris/2024 Copies 1 125 Baking Simpol/sarthou Copies 1 126 Bar & Beverage Management - A Book On Drinks 2nd Edition / Bajao/ Osorno / 2023 Copies 2 127 Bar And Beverage Management/richie O. Cruz & Angelie Marie L. Vizconde/2023 Copies 1 128 Bar And Beverage Service / Rojo, L./2022 Copies 1 129 Basic Approach To Income Taxation/justice Japar B. Dimaampao/2021 Copies 1 130 Basic Biology / K Chaundry / 2023 Copies 1 131 Basic Computer Coding: Sql / 3g E-learning/2022 Copies 1 132 Basic Financial Management In The Philippine Setting/matt Martin/2022 Copies 1 133 Basic Knowledge Of Room Service / 3g / 2024 Copies 1 134 Basic Microeconomics/baumil/2022 Copies 1 135 Basic Thermodynamics / Arias/2024 Copies 1 136 Basics Of Organic Chemistry / 3g E-learning/2024 Copies 1 137 Basics Of Thermodynamics / 3g E-learning/2024 Copies 1 138 Beauty Secrets And Skin Care Techniques / Arora/2023 Copies 1 139 Becoming A Strategic Leader: Capitalize On The Power Of Your Personality / Watts, George W. / 2024 Copies 1 140 Becoming An Academic Writer \3ed.: 50 Exercises For Paced, Productive, And Powerful Writing / Goodson, Patricia / 2023 Copies 1 141 Between Shades Of Gray: The Graphic Novel / Donkin, Andrew / 2021 Copies 1 142 Biochemistry And Molecular Biology Of Beneficial Plants / Mahdi/2023 Copies 1 143 Biochemistry And Plant Breeding / Wilkins/2021 Copies 1 144 Biodiversity And Utilization Of Biological Resources / Ibbara/2023 Copies 1 145 Biofertilizer Technology (hb)/singh, A./2023 Copies 1 146 Biofortification As Staple Crops / Kumar, Shiv Copies 1 147 Biological Chemistry/jinky Marie T. Chua Et Al./2022 Copies 1 148 Biotechnology For Food, Agriculture And Environment / Bhardwaj/2022 Copies 1 149 Biotechnology In Animal Husbandry / Wilson/2021 Copies 1 150 Block Chain Technology & Crypto Currencies, / 2020 Copies 1 151 Botany (agricultural Applications) / Singh/2022 Copies 1 152 Bread And Pastry Production / Ma. Patria R. Andres/2021 Copies 1 153 Bread And Pastry Production Nc Ii (tourism Sector)/cabreros,et.al /2021 Copies 1 154 Bread And Pastry Production Nc Ii, 2nd Edition/corazon Barateta-prades /2022 Copies 2 155 Broiler Farming And Management/singh, R./2020 Copies 1 156 Building And Enhancing New Literacies Across The Curriculum/alata/2019 Copies 1 157 Building Competence In School Consultation \2ed. / Newman, Daniel S. / 2024 Copies 1 158 Building Literacy With Multilingual Learners \3ed.: Insights From Linguistics / Lems, Kristin / 2024 Copies 1 159 Business Communication With Fundamentals Of Research/evelyn L. Sebastian Et Al./2021 Copies 1 160 Business Finance/don M. Magpantay And Dionisio G. Magpantay/2022 Copies 1 161 Business Laws And Regulation /cada/2021 Copies 1 162 Business Mathematics A Practical Approach 3e/sirug/2023 Copies 1 163 Calculus 1 /vicencio/ 2023 Copies 1 164 Calculus Ll For Dummies / M. Zeganelli. / 2023 Copies 1 165 Career Service Examination Reviewer (updated Edition)/marina T. San Jose- Pangan/2024 Copies 1 166 Cases For Event Management And Event Tourism / Getz, Donald / 2023 Copies 1 167 Child And Adolescent Learners/mingoa/2021 Copies 1 168 Child And Development /del Rosario/2021 Copies 1 169 Children And Adolescent Literature/gonzales,et.al/2022 Copies 1 170 Children With Disabilities Their Psychology And Instruction / Ramar/2024 Copies 1 171 Civil Service Exam Reviewer Professional & Sub Professional Level 3e Copies 1 172 Civil Service Professional & Sub Professional Exam Reviewer/colas, M., /2024 Copies 1 173 Classic Patterns And Essentials Techniques Of Dressmaking Rev./ed / Pushpanjali/2023 Copies 1 174 Clean And Renewable Energy (hb)/pehcevski, J./2021 Copies 1 175 Climate, Forest, Biodiversity And Desert / Singh/2023 Copies 1 176 Cloud Computing \2ed.: Concepts, Technology, And Architecture / Erl, Thomas / 2024 Copies 1 177 Coffee, Tea, Spice, Herbs, & N\non Timber Products & Processing / 3g E. Copies 1 178 College Algebra \13ed. / Gustafson, David R. / 2023 Copies 1 179 Commercial Baking With Entrepreneurship Leading To Bread And Pastry Production Ncii/dinaga And Lirazan/2022 Copies 2 180 Communicating With A Purpose/mejia. J./2023 Copies 1 181 Compensation Administration /zarate/2021 Copies 1 182 Complex Variable Theory / Seife/2024 Copies 1 183 Comprehensive Biotechnology / Hines/2022 Copies 1 184 Computer Application 3g E./ 2022 Copies 1 185 Computer Graphics Science / Singh/2023 Copies 1 186 Conduct Financial Planning Analysis And Research / 3g E-elening /2022 Copies 1 187 Contemporary Marketing. / Boone & Kurtz/ 2022 Copies 1 188 Continuous Comprehensive Evaluation, Awareness, Attitude & Competencies Of Teachers / Sreenivasulu/2023 Copies 1 189 Cookery/billy T. Festijo Et Al./2022 Copies 1 190 Core Concepts In Computer Science: Operating Systems (2nd Edition)/godeau, E. /2024 Copies 1 191 Core Concepts In Mathematics /alwazeer,duried /2024 Copies 1 192 Core Concepts In Mathematics: Differential Equations (2nd Edition) (pb) /dominic Mashoko/2024 Copies 1 193 Core Concepts In Mathematics: Statistics (2nd Edition) (pb) /diego Fernandez/2024 Copies 1 194 Cosmetics And Treatments Of Body Parts, / 3g / 2023 Copies 1 195 Counseling And Mental Health Of Adolescents /jena, S & Mohanty, N. /2021 Copies 1 196 Course Module For Inclusive Education In Early Childhood Setting/lim/2021 Copies 1 197 Course Module Of Language Program/lim/2021 Copies 1 198 Crafting & Executing Strategy, 23 E. / Thompson / 2022 Copies 1 199 Creative Writing Workbook For Senior High School Students/ Javier, T. & Zoleta M./2021 Copies 1 200 Critical Ancient World Studies \1ed.: The Case For Forgetting Classics / Umachandran, Mathura / 2024 Copies 1 201 Critical Pedagogy Reader, The \4ed. / Darder, Antonia / 2024 Copies 1 202 Crowd And Crisis Management/ Angelie Marie L. Vizconde Et., Al./2022 Copies 2 203 Cruise Tourism / Escabillas A./2022 (reprint) Copies 1 204 Culinary Nutrition The Science And Art Of Healthy Cooking/ Maria Felisa T. Natad/2023 Copies 3 205 Current Issues And Prospects Of Vocational Education / Reese/2024 Copies 1 206 Current Issues: Deforestation (hb)/maria Jose/2024 Copies 1 207 Curriculum Design And Lesson Planning 3r Ed / 3g E-learning/2023 Copies 1 208 Data Analytics In Tourism And Hospitality Management/ Jaravata., /2024 Copies 1 209 Database System, 14 Ed., / C. Coronel/ 2023 Copies 1 210 Decision Making /. Risha Khandelwal/2024 Copies 1 211 Decision Making Management And Administration / Khan/2023 Copies 1 212 Design Of Masonry Structures / Sharma/2023 Copies 1 213 Designing And Teaching Fitness Education Courses / Greenberg, Jayne D. / 2023 Copies 1 214 Destination Management & Marketing/ Chester Dave G. Arenas/ Copies 1 215 Developing Your Communication Skills In Social Work \2ed. / Beesley, Paula / 2024 Copies 1 216 Development Of Child / Hayward/2024 Copies 1 217 Differential Calculus A Work Text / Aspuria, C. /2023 Copies 1 218 Differential Calculus In Several Variables \1ed.: A Learning-by-doing Approach / Ghergu, Marius / 2024 Copies 2 219 Differential Geometry Of Course & Surface, 3rd / S. Lovett Copies 1 220 Digitalization Of Logic Design / Crowley/2024 Copies 1 221 Discourse Analysis \4ed. / Johnstone, Barbara / 2023 Copies 1 222 Discovering Leadership \2ed.: Designing Your Success / Middlebrooks, Anthony / 2024 Copies 1 223 Discrete Mathematics, / 3g E/ 2020 Copies 1 224 Disease Management In Plantation Crops / Burke, James / 2024 Copies 1 225 Diseases Of Dairy Animal - Hb/singh, N./2021 Copies 1 226 Diseases Of Fruit Crops 2/ed / Singh/2022 Copies 1 227 Diseases Of Poultry/gray, E./2018 Copies 1 228 Diseases Of Vegetable Crops 4th Edition / Singh/2023 Copies 1 229 Drills And Exercises For Intensive English / Josue / 2023 Copies 3 230 Dsm-5-tr- 5th Ed./2022 Copies 1 231 Dynamic Physical Education For Elementary School Children /beighle, Aaron / 2024 Copies 1 232 E- Governance For Development Administration / Abante, M. / 2024 Copies 1 233 Earth And Life Science Anthropogenic The Epoch Of Significant Human Influence K-12/reyes/2023 Copies 1 234 Earth Science: World Edition, 2nd Ed. / 3g E. /2023 Copies 1 235 Earth Science: Quaternary Earth, The Age Of Humans, 2e/reyes, Reyes/2023 Copies 1 236 Ecological Silvicultural Systems / Palik, Brian J. Copies 1 237 Economic Raising Of Poultry Hb/sharma, Y./2020 Copies 1 238 Education In The Third Millennium: Towards An Operational Model In Language Teaching (hb)/barjesteh, H. & Frouzandehfar, L./2022 Copies 1 239 Education Perspective In Sports Psychology / Thomas/2024 Copies 1 240 Educational Psychology / Richards / 2023 Copies 1 241 Educational Testing And Measurement \12ed. / Kubiszyn, Tom / 2024 Copies 1 242 Elements Of Crop Plant Virology / Beyer, Shawn / 2024 Copies 1 243 Elements Of Engineering Electromagnetic, / A. Signh / 2023 Copies 1 244 Elements Of Personality: Discovering Connections / Bornstein, Robert F. / 2024 Copies 1 245 Empowering Public Administrators: Ethics & Public Service Va / Olejarski, Amanda M. / 2024 Copies 1 246 Empowerment Technologies/pomperada & Castellano/2023 Copies 1 247 Encyclopedia Of Science & Technology. / R Chandra / 2023 Copies 1 248 Engineering Mechanics / Saim/2024 Copies 1 249 English Language An Introduction / Edward/2024 Copies 1 250 English Language History / Robinson/2024 Copies 1 251 English Proficiency For Empowered Professionals/ Santillana P./2023 Copies 2 252 English/purposive Communication (a Modular Approach)/gutierrez-ang/2023 Copies 1 253 Entrepreneurial Mindset Obe Approach/camilar-serrano, A./2021 Copies 1 254 Entrepreneurship In Tourism And Hospitality/ Areola Et., Al./2021 Copies 1 255 Entrepreneurship In Tourism And Hospitality/ Marcelo, J. & Samson, G./2022 Copies 1 256 Entrepreneurship/areola/2021 Copies 1 257 Entrepreneurship/solita A. Frias And Cristina B. Banastao/2022 Copies 1 258 Environmental Changes On Water Resources / Orn/2020 Copies 1 259 Environmental Conservation In Tourism/ Angelie Marie L. Vizconde & Mark Angelo Q. Paraiso/2022 Copies 1 260 Environmental Engineering / Monteiro/2023 Copies 1 261 Environmental Ethics \3ed. / Boylan, Michael / 2023 Copies 1 262 Ergonomics And Facilities Planning For The Hospitality Industry/lolita O. Mendoza/2024 Copies 1 263 Ergonomics And Facilities/cornell/2021 Copies 1 264 Ergonomics Facilities Planning For The Hospitality Industry/buenaventura, Jhon & B-gutierrez L./2023 Copies 2 265 Essential Of Biotechnology: World Ed./ 3g E. /2023 Copies 1 266 Essential Of Ecology: World Ed/ 3g E. / 2023 Copies 1 267 Essentials In Law On Obligations And Contracts/tranquilino R. Cagurangan/2022 Copies 1 268 Essentials Of Administrative Office Management/jessie F. Sergote,2022 Copies 1 269 Essentials Of Conditioning And Learning, 5ed. / Domjan, Michael / 2023 Copies 1 270 Essentials Of Educational Technology / Carter/2024 Copies 1 271 Essentials Of Human Computer Interaction/dan Michael A. Cortez Et., Al/2021 Copies 1 272 Essentials Of Human Resource Management (hb) /somannagari, B./2024 Copies 1 273 Essentials Of Project Management/ Cabrera, M., Et Al. /2022 Copies 1 274 Essentials Of Purposive Communication/caudilla, J./2023 Copies 2 275 Essentials Of Risk Management/ Francis B. Banaag/2024 Copies 2 276 Essentials Of Sports Nutrition, / Fry / 2023 Copies 1 277 Essentials Of Youth Fitness, / 3g E. / 2022 Copies 1 278 Essentials Strength Training And Conditioning / 3g E-learning/2022 Copies 1 279 Ethics /bulaong/2021 Copies 2 280 Ethics And Aptitude In Governance / Miguel/2024 Copies 1 281 Ethics Obe Approach/bacolod,et.al/2023 Copies 2 282 Ethics Public Service/ Dean David Robert C. Aquino/2023 Copies 1 283 Ethics Theories And Applications/evangelista, F & Mabaquiao, Jr/2020 Copies 1 284 Ethics Toolkit, The \2ed.: A Compendium Of Ethical Concepts And Methods / Baggini, Julian / 2024 Copies 1 285 Ethics/corpuz/2020 Copies 1 286 Ethics/mondares,r/2024 Copies 1 287 Event Management 2nd Edition/ Michael L. Dela Cruz & Ma. Del Carmen G. Labong /2024 Copies 1 288 Event Panning: Weddings / 3g E-learning / 2024 Copies 1 289 Event Planning: Food Fests / 3g E-learning / 2024 Copies 1 290 Evolution Of Management Thought, The \9ed. / Wren, Daniel A. / 2024 Copies 1 291 Exploring Children's Literature To Enhance Literacy In The Elementary Grades Obe-based/conjusta & Violeta/2022 Copies 2 292 Exploring Entrepreneurship/3g E-learning/2022 Copies 1 293 Exploring Gender And Society/ Wenceslao Beterbo Ecoben/2023 Copies 1 294 Facilitating Learner Centered Teaching/mingoa/2019 Copies 2 295 Facilitating Learner-centered Teaching 1e/rungduin,et.al/2021 Copies 1 296 Feeding Organic Farm Animals. / V. Kele / 2022 Copies 1 297 Fertigation A Novel Method Of Applying Crop Nutrients/p. Somon/2021 Copies 1 298 Field Study 1 Observations Of Teaching -learning In Actual School Environment Obe/ Marcela J. Leus & Estefania S. De Guzman/2023 Copies 1 299 Field Study 1/pawilen/2019 Copies 1 300 Field Study 2 Participation And Teaching Assistantship Obe/ Dalisay G. Brawner, Edd Rosalina A. Caubic/2023 Copies 1 301 Field Study 2/pawilen/2019 Copies 1 302 Filipino Vegan Recipes And Stories To Stir Up Filipino Flavors And Perspectives Revised Ed/enriquez-diez/2022 Copies 1 303 Financial Analysis And Reporting / Bairan, B. / 2024 Copies 1 304 Financial Management/marife Agustin-acierto Et Al./2022 Copies 1 305 Financial Planning & Personal Finance. / J. Murray, / 2023 Copies 1 306 Finite Mathematics & Applied Calculus 8th Ed./ Warner / 2023 Copies 1 307 Fit To Be Well, 6th Ed. / Thygerson /2023 Copies 1 308 Fitness Trainer Essentials, 4th Ed./ Fagan. / 2023 Copies 1 309 Fluid Machinery / Vincent / 2024 Copies 1 310 Fluid Mechanics / Dias/2024 Copies 1 311 Food And Beverage Processing A Beginner's Guide To Basic Food Processing K-12/rondilla,et.al/2023 Copies 2 312 Food And Beverage Services/ Francis Alvin E. Rosalda & Angelie Marie L. Vizconde/2021 Copies 1 313 Food Management In Hotel Travel & Tourism / A. Sinha / 2023 Copies 1 314 Food Service Management / Fernandes/2024 Copies 1 315 Food Styling And Design/sanchez, Et.al/2022 Copies 1 316 Foreign Language 1/tomas/2022 Copies 1 317 Foreign Language 2/tomas/2023 Copies 1 318 Foreign Language French & Japanese/ Aquino K./2022 Copies 1 319 Foreign Language L /galinato-tomas/2023 Copies 2 320 Forest Soils And Carbon Storage / Huel/2020 Copies 1 321 Forest Wood Resource For Bioenergy And Biofuels / Yu, Gek / 2024 Copies 1 322 Formative Assessment Handbook, The: Resources To Improve Learning Outcomes For All Students / Freibrun, Marine / 2024 Copies 1 323 Foundation Course For Application Software Development/ 3ge. Copies 2 324 Foundation Of Special And Inclusive Education/halal/2022 Copies 1 325 Franchising Strategies, /e. Teineira / 2023 Copies 1 326 Franchising/connie A. Stevens/2024 Copies 1 327 From Renaissance To Seventeenth Century: A Textbook Of English Literature / S. Johnson/2024 Copies 1 328 Functional Analysis / Vaidyanathan, Prahlad / 2023 Copies 1 329 Functional Core For Women. / Williams / 2024 Copies 1 330 Fundamental Concepts And Skills Of Business Communication / Haq/2024 Copies 1 331 Fundamentals In Food Service…by Yap C2022 Copies 1 332 Fundamentals In Food Service Operations/baliste, B C2022 Copies 1 333 Fundamentals In Lodging Operations /monzon-po, S./2023 Copies 1 334 Fundamentals Of Anatomy & Physiology, Ge \12ed. / Martini, Frederic H. / 2023 Copies 1 335 Fundamentals Of Animal Biochemistry And Biotechnology / Oriel, Ben / 2024 Copies 2 336 Fundamentals Of Earth & Life Science/cadiz Et Al./2021 Copies 1 337 Fundamentals Of Food Service Operation/ Rea Dela Cruz/2022 Copies 1 338 Fundamentals Of Information Management/jake R. Pomperada/2023 Copies 1 339 Fundamentals Of Lodging Operations With Housekeeping Laboratory Manual / Bajao/ Osorno/2023 Copies 1 340 Fundamentals Of Lodging Operations/policarpio/2021 Copies 1 341 Fundamentals Of Management / Martin, M. /2022 Copies 1 342 Fundamentals Of Performance Management/ Dela Cruz, M. /2022 Copies 1 343 Fundamentals Of Rational Emotive Behavior Therapy /3ed.: A Training Handbook / Dryden, Windy / 2024 Copies 1 344 Gastronomic Tourism Etrata, M. & Vizconde, M. Copies 1 345 Gender And Society Concepts, Fundamental Principles, And Methodologies For Comprehending Gender Dynamics In The Philippines Towards Fostering A More Efficient And Highly Gender-sensitive Society /minsoware S. Bacolod Et Al./2024 Copies 1 346 Gender And Society With Peace Education Towards An Inclusive Higher Education Perspective/shara May T. Espinol Et Al./2023 Copies 1 347 Gender And Society/rodolfo M. Martinez Jr. & Francis M. Camposano/2022 Copies 1 348 Gene Expression And Molecular Biology /haas, J. /2023 Copies 1 349 General Biology / Gadi / 2024 Copies 1 350 General Physics 2 4th Ed./ 3g E./ 2023 Copies 1 351 General Psychology / Raghvan/2024 Copies 1 352 General Psychology With Aids Education 2e/banalo/2022 Copies 1 353 Genetic And Agronomical Aspects To Crop Physiology / Borell, Andrew / 2024 Copies 1 354 Genetic Resistance Of Plant Diseases / Brown, Kevin / 2024 Copies 1 355 Genetics Of Plants / Nautiyal/2023 Copies 1 356 Genetics: Analysis And Principles \8ed. / Brooker, Robert J. / 2024 Copies 1 357 Genetics: From Genes To Genomes 8ed. / Goldberg, Michael L. / 2024 Copies 1 358 Genome Targeting For Crop Improvement / Ingole/2023 Copies 1 359 Geography Of Cruise Ship / B. Chya / 2023 Copies 1 360 Geography Of Tourism \2ed.: Image, Impacts And Issues / Mason, Peter / 2023 Copies 1 361 Global Business Environment, The \6ed.: Sustainability In The Balance / Morrison, Janet / 2023 Copies 1 362 Global Englishes An Introduction / Kevis/2024 Copies 1 363 Global Warming & Agriculture / S.l Jonas / 2020 Copies 1 364 Good Governance/delos Santos Et Al./2021 Copies 1 365 Governance Business Ethics/meneses Et Al./2022 Copies 1 366 Green Technologies For Sustainable Development / Sharma/2023 Copies 1 367 Hajimemashou Learning Basic Japanese/marjorie Rea-dafun/2022 Copies 2 368 Halal Cookery/ Gemma M. Martinez/2024. Copies 2 369 Hawkeye: Bishop Takes Kings / Poston, Ashley / 2023 Copies 1 370 Heat Transfer Principles / Marie-magdeleine/2024 Copies 1 371 Helping Children & Teens With Difficult-to-treat Ocd / Cassiday, Karen Lynn / 2023 Copies 1 372 Heritage Tourism (2021) By Visconde M. Et., Al2021 Copies 1 373 Heritage Tourism/cabulay/2021 Copies 1 374 High-impact Design For Online Courses \1ed. / Simunich, Bethany / 2024 Copies 2 375 High-tech Instruction, Evolution Of Innovations In Teaching / Priyadarshini / 2023 Copies 1 376 History Of The Philippines /tuzon-canday/2021 Copies 1 377 Home Processing Of Poultry/sharma, Y./2020 Copies 1 378 Hospitality And Tourism Facilities Management And Design/sheen B. Gutang/2024 Copies 1 379 Hospitality And Tourism Management / Fauilkner, Gunther / 2023 Copies 1 380 How To Build Your Antiracist Classroom / Badu, Orlene / 2023 Copies 1 381 Html, Css, & Javascript All-one-one For Dummies / Mcfedries, Paul / 2023 Copies 1 382 Human Resource Development: An Integrated Model With Organizational Citizenship Behavior / Jain/2023 Copies 1 383 Human Resource Management & Internal Marketing \1ed.: Routledge Advances In Management And Business Studies / Mishra, Teena / 2024 Copies 1 384 Human Resource Management \4ed.: Strategic And International Perspectives / Crawshaw, Jonathan / 2024 Copies 1 385 Human Resource Management In The Philippines/supangco , Et.al/2021 Copies 1 386 Human Resource Management /lauron/2019 Copies 5 387 Human Resource Management /pedrito R. Pereda Et Al./2020 Copies 1 388 Human Resource Research Methods / Becker/2022 Copies 1 389 Human-computer Interaction \2ed.: An Empirical Research Perspective / Mackenzie, Scott / 2024 Copies 2 390 Illustrated Handbook Of Digital Marketing / 3g E. / 2020 Copies 1 391 Illustrated Handbook Of Excellence In Management / 3g E-learning/2023 Copies 1 392 Illustrated Handbook Of Green Farming. / 3g E/ 2022 Copies 1 393 Importance Of Curriculum Development In Education Process / Roach/2024 Copies 1 394 Importance Of Education In Personality Development / Moore/2024 Copies 1 395 Inclusive Education In Early Childhood.../boholano, Et.al/2023 Copies 1 396 Inclusive Education….2024 Ed. Boholano, Menoria-navarro, Jamon, Cortes/2024 Copies 2 397 Income Taxation /baugawan/2023 Copies 1 398 Income Taxation Laws Principles And Applications/rex B. Banggawan/2021 Copies 1 399 Industrial Marketing T. Fotiadis / 2023 Copies 1 400 Information Assurance And Security 1 & 2/marmelo Abante Et Al./ 2022 Copies 1 401 Information Management/dan Michael A. Cortez Et Al./2023 Copies 2 402 Information Security And Ccp Scheme / Ahmed/2024 Copies 1 403 Injuries And Rehabilitation In Sports / Sarat /2024 Copies 1 404 Innovative Approaches For Detection, Diagnosis And Management Of Plant Diseases (hb)/mesta, R.k. Et Al./2023 Copies 1 405 Insect Pest Management And Engineering / Avery/2021 Copies 1 406 Instructional Technology In Early Education /contreras/2021 Copies 2 407 Integrated Pest Management In Horticulture Crops /bates, Terry / 2024 Copies 1 408 Integrated Principles Of Zoology, / 19 Ed./ C. Hickman Copies 1 409 Intellectual Disability And Language Intervention / Dr. Mary P.v./2023 Copies 1 410 International Business & Trade/matt Martin/2021 Copies 1 411 International Cuisine/ Victoriano, S. Et.al.2024 Copies 1 412 International Cuisine (2022)/ By Victoriano Copies 1 413 International Marketing, 4th Ed. / Ginkota/ 2023 Copies 1 414 Introduction Guide To Operating System. / J. Padallan/ 2023 Copies 1 415 Introduction To Administration And Public Policy / Miller/2024 Copies 1 416 Introduction To Application Development And Emerging Technologies / Pomperada, J. / 2023 Copies 2 417 Introduction To Automotive Tesda Competency Based/bellete, Et.al/2021 Copies 1 418 Introduction To Computer Concepts, / Parson/ 2023 Copies 1 419 Introduction To Computer Programming & Web Design 3g. E./ 2023 Copies 1 420 Introduction To Computer Programming With Java/jake Rodriguez Pomperada/2022 Copies 2 421 Introduction To Cruise Line/ Nathaniel E. Laxa 2021 Copies 1 422 Introduction To Culinary Arts/lago, E. & Pauig, X. /2022 Copies 1 423 Introduction To Cyber Security/ Jake R. Pomperada & Jason V. Castellano/2023 Copies 2 424 Introduction To Domestic Animal Physiology / Manning, Jake / 2024 Copies 2 425 Introduction To Educational Technology / Ramirez/2024 Copies 2 426 Introduction To Electrodynamics \5ed. / Griffiths, David J / 2024. Copies 1 427 Introduction To Ethics/umali, Et.al/2023 Copies 2 428 Introduction To Go Programming / Jake Rodriguez Pomperada/2022 Copies 1 429 Introduction To Hospitality Operations / 3g / 2023 Copies 1 430 Introduction To Hotel Management / Juyal 2024 Ed. Copies 1 431 Introduction To Hotel Management / Juyal, Deepak 2023 Ed. Copies 1 432 Introduction To Information Technology And Computer Fundamentals, 2e/besueña, Pomperada/2023 Copies 1 433 Introduction To Java Programming 3rd Ed. / Pomperada, J., / 2024 Copies 1 434 Introduction To Jquery Programming / Jake R. Pomperada,/2021 Copies 1 435 Introduction To Meetings, Incentives, Conference, Events/cruz/2020 Copies 1 436 Introduction To Meetings, Incentives, Conferences And Events Management (mice)/ Arenas, C.2023 Copies 1 437 Introduction To Meetings, Incentives, Conferences And Events Management (mice)/ Maria Arlene (bam) Tuazon- Disimulacion/2022 Copies 1 438 Introduction To Philippines Politics & Government/ Baes, A. & Francisco, J./2024 Copies 1 439 Introduction To Physical Education, Fitness, And Sport 3rd Ed / 3g E-learning/2022 Copies 1 440 Introduction To Plant Pathology Methods / Londo/2024 Copies 1 441 Introduction To Principles Of Plant Pathology 5th Edition / Singh/2023 Copies 1 442 Introduction To Project Management / Abante, M. Et., Al,.2023 Copies 1 443 Introduction To Public Administration In The Philippines: A Redear/danilo Dela Rosa Reyes Et.al., /2016 Copies 1 444 Introduction To Public Administration/bihasa C./2022 Copies 1 445 Introduction To Public In The Philippines: A Reader/danilo Dela Rosa Reyes Et., Al./2015 Copies 1 446 Introduction To Research / Sergote, J. /2024 Copies 2 447 Introduction To Research Method, 2nd Ed. / Pajo. Copies 1 448 Introduction To Sensory Evaluation Of Foods / Gautam/2023 Copies 1 449 Introductory Microbiology For Beginners / Wright/2024 Copies 1 450 Introduksiyon Sa Pag-aaral Ng Wika (pandalubhasaan) - Luzon/balawan Et Al/2021 Copies 1 451 Introduksiyon Sa Pag-aaral Ng Wika (pandalubhasaan) -vizmin/canasa Et Al/2021 Copies 1 452 Introduksiyon Sa Pananaliksik Sa Wika At Panitikan (vizmin)/arbasto Et Al/2022 Copies 2 453 Jose Rizal Life And Work/ponferrada/2023 Copies 2 454 Jose Rizal's El Filibusterismo/ Leon Ma. Guerrero Copies 1 455 Kettle Bell Strength Training Anatomy / Hartle, Michael / 2024 Copies 1 456 Key Concepts In Hotel Management / J. Raga / 2023 Copies 1 457 Key Methods In Geography \4ed. / Clifford, Nicholas / 2023 Copies 1 458 Kinderchat Guide To Elementary School Projects, The \1ed. /echternacht, Heidi / 2024 Copies 1 459 Kinesiology In Sports / R. Mishra / 2023 Copies 1 460 Kitchen Essentials & Basic Food Preparation/dinaga/2021 Copies 1 461 Kitchen Essentials/daryl Ace Cornell/2020 Copies 1 462 Komunikasyon At Pananaliksik Sa Wika At Kulturang Filipino/gonzalvo/2021 Copies 1 463 Komunikasyon Sa Pananaliksik Sa Wika At Kulturang Filipino/s. Apolonio, Et.al. /2022 Copies 1 464 Kontekstwalisadong Komunikasyon Sa Filipino Alinsunod Sa Cmo 57…2e/maranan, M./2023 Copies 2 465 Labor Laws And Social Legislation/lito A. Penaflor And Karyl O. Penaflor/2023 Copies 1 466 Labor Relations Management And Negotiations/angelita Ong Camilar-serrano Et Al./2023 Copies 1 467 Labor Relationships And Negotiations/cecilio D. Duka/2024 Copies 1 468 Language Learning Materials Development/abao,et.al/2021 Copies 1 469 Language, Culture And Society/mananay/2021 Copies 1 470 Lateral Thinking For Every Day \1ed. / O'farrell, Maggie / 2020 Copies 1 471 Lead Through Anything \1ed. / Seale, Dustin / 2024 Copies 1 472 Leading School Culture Through Teacher Voice 7 Agency / S. Zepede/ Copies 1 473 Learn And Enjoy Intermediate Statistics The Easy Way - Advanced Volume 2 Revised Edition / Uriarte/2024 Copies 1 474 Learners With Emotional, Behavioral, Language/padilla/2024 Copies 1 475 Learning General Psychology, The Easy Way / Uriarte/2024 Copies 1 476 Learning Theories Simplified \3ed.: An How To Apply Them To Teaching / Bates, Bob / 2023 Copies 1 477 Learning To Teach In The Secondary School / S. Capel Copies 1 478 Legal Aspect/cabulay/2020 Copies 1 479 Legal Aspects In Tourism... The Philippine Tourism Laws Simplified / Cagurangan /2022 Ed Copies 2 480 Legal Aspects In Tourism... / Cabulay D. & Carpio- Aldeguer C./2020 Copies 1 481 Legal Aspects In Tourism And Hospitality / Bascos, M./2022 Copies 1 482 Leisure & Recreation Management For Tourism And Hospitality Industry/ Cornell, D./2023 Copies 2 483 Let Comprehensive Reviewer General Education/corpuz, Et.al/2023 Copies 3 484 Let Comprehensive Reviewer Professional Education/corpuz, Et.al/2023 Copies 2 485 Let Comprehensive Reviewer Specialization Values Education/de Leon, E./ 2023 Copies 1 486 Let Comprehensive Reviewer/corpus B., Et. Al., /2023 Copies 1 487 Let Comprehensive Reviewer…. Professional Education Assessment In Learning/corpuz, B./2023 Copies 3 488 Let Licensure Exam For Teacher Comprehensive Reviewer/colas, M./2022 Copies 1 489 Leveling Up Your Personality Seven Fold Components/albina Sacramento Bunyi, Ed.d./2022 Copies 1 490 Life And Works Of Jose Rizal/ Lomibao, J./2024 Copies 1 491 Literature And Literacy For Young Children \8ed.: Envisioning Possibilities In Early Childhood Education For Ag / Giorgis, Cyndi / 2024 Copies 2 492 Living In The Environment / G.t. Miller / 2021 Copies 1 493 Living In The Information Technology Era/abante, Et.al/2023 Copies 1 494 Living In The It Era/marabe, N/2024 Copies 1 495 Macro Perspective Of Tourism And Hospitality/ Yeung, M./2023 Copies 1 496 Macro Perspective/cruz/2018 Copies 1 497 Macroeconomics / Brenner / 2023 Copies 1 498 Macroeconomics Obe Approach/marcelo, Jr. D/2021 Copies 1 499 Made To Measure: An Easy Guide To Drafting & Sewing A Custom Wardrobe-16 Patte / Jewell, Elisalex / 2023 Copies 1 500 Management \8ed. / Samson, Danny / 2024 Copies 1 501 Management Communication \7ed: A Case Analysis Approach / O'rourke, James S. / 2023 Copies 1 502 Management Concepts For Food And Beverage / Gordon / 2024 Copies 1 503 Management Of Drought Risk And Integrated Water Resources (hb)/vahala, R./2024 Copies 1 504 Management Of Housekeeping Operations / Lodi/2023 Copies 1 505 Management Of Human Behavior In An Organization/angelita Ong Camilar-serrano And Marivic Fransisco Flores/2022 Copies 1 506 Management Of Sport Infrastructure, 2nd Ed. / 3g E. / 2023 Copies 1 507 Management Of Sports Events, 3g. E/ 2023 Copies 1 508 Managing Change In Orgranizations \2ed. / Sveningsson, Stefan / 2023 Copies 1 509 Managing Disaster Risks To Cultural Heritage \1ed.: From Risk Preparedness To Recovery For Immovable Heritage / Rouhani, Bijan / 2024 Copies 2 510 Mandarin 1 Revised Edition/ Fr. Anthony A. Morillo Et.al/2019 Copies 1 511 Maritimes Issue & Legislation Cruise Hospitality / G. Gandhi / 2023 Copies 1 512 Marketing Concepts And Strategies 9th Edition/pb/2023 Copies 1 513 Marketing For Tourism And Hospitality Obe Approach/camilar-serrano, A./2020 Copies 1 514 Marketing Research 2024 Ed.by Abantao, Bj Copies 1 515 Mathematical Methods In Physical Science / Philips/2024 Copies 1 516 Mathematics In The Modern World/ Sirug, W./2023 Copies 1 517 Mathematics In The Modern World/manlulu/2019 Copies 2 518 Matrix Methods And Vector Spaces In Physics / Singh/2023 Copies 1 519 Mechanism Of Abiotic Stress Tolerance In Crop Plants / Jonathan, Greenholt Copies 1 520 Mechanism Of Animal Growth And Development/guy Medhurst/2021 Copies 1 521 Media & Information Literacy In The 21st Century An Instructional Materials For Senior High School Students/basilan, Et.al/2021 Copies 2 522 Menu Design And Revenue Management/arenas, C./2022 Copies 1 523 Methods Of Research In Business Education/marivic Francisco Flores/2023 Copies 1 524 Microeconomics Theories And Applications/danilo F. Marcelo Jr./2023 Copies 2 525 Mind For Language, A: An Introduction To The Innateness Debate / Van Der Hulst, Harry / 2024 Copies 1 526 Mis, 10th Ed/ Bidgoli/ 2021 Copies 1 527 Mk 5tg, Asia Pacific Edition, / M. Gardiner/ 2023 Copies 1 528 Model-driven Devops \1ed.: Increasing Agility And Security In Your Physical Network / Carter, Steven/ 2023 Copies 1 529 Modeling, Sensing And Control Of Gas Metal Arc Welding / Kumar/2023 Copies 1 530 Modern Engineering Graphics And Design/singh, M./2023 Copies 1 531 Modern Experimental Seed Technology / Walter/2024 Copies 1 532 Modular Approach To Art Appreciation Obe Based/inocian, Et.al/2021 Copies 2 533 Modyul Para Sa Pagtuturo Ng Filipino Sa Elementarya I (estruktura At Gamit Ng Wikang Filipino)/comiso-gallo, Et.al/2020 Copies 1 534 Molecular Genetics And Breeding Of Forest Trees / Tremblay/2023 Copies 1 535 Moral Philosophy And Ethics / Bacuyag/2024 Copies 1 536 More Dance Improvisations / Reeve, Justine Diane / 2024 Copies 1 537 Multicultural Diversity In Workplace For The Tourism Professional/ Michael Bhobet B. Baluyot & Ma. Dina D. Jimenez/2022 Copies 1 538 Multicultural Diversity/vic Alcuaz/2020 Copies 1 539 Multi-tiered System Of Support In Elem. School / A. Clark Copies 1 540 Must Know High School Grammar & Composition \1ed.: Find Out The Important Stuff In A Flash / Scalera, Rosemary / 2024 Copies 2 541 National Service Training Program Civic Welfare Training Service I/carlos A. Reyes/2022 Copies 1 542 New Frontier Of Zoology / R. Nandan / 2023 Copies 1 543 New Learning Economy, The \1ed.: Thriving Beyond Higher Education / Betts, Martin / 2023 Copies 1 544 Nihongo For Hospitality And Traveler's Guide/biscocho/2019 Copies 1 545 Nine Lives/danielle Steel/2021 Copies 1 546 Noli Me Tangere Ni Jose Rizal/paculan/2022 Copies 1 547 Nonlinear Differential Equations And Applications / Ferguson/2024 Copies 1 548 Nstp 1 Guide In Civic Welfare Training Service/lonez, Et.al/2023 Copies 1 549 Nstp 1/ferrer/2023 Copies 1 550 Nstp 2 National Service Training Program Citizen Empowerment Towards Community Building/punzalan/2023 Copies 1 551 Nstp 2/ferrer/2024 Copies 1 552 Nstp Cwts 2 A Textbook For The New General Education Curriculum/dela Cruz, Et.al/2022 Copies 1 553 Nutrition And Metabolism In Sports Exercise / Collins /2024 Copies 1 554 Objected Oriented Programming / Oluyide/2024 Copies 1 555 Obligations And Contracts (law And Application) For Business And Law Students/fidelito R. Soriano/2022 Copies 1 556 Observing The Filipino Family, A Filipino Sociologist At Work/ Belen Tan-gatue Medina/2023 Copies 1 557 Online Learning The Order Of The Future / Priyadarshini/2022 Copies 1 558 Online New Teaching And Learning (new Roles For Participants)/buck, H./2021 Copies 1 559 Operating Systems / Zadeh/2024 Copies 1 560 Oral Communication In Context Revised/jose/2023 Copies 1 561 Ordinary Differential Equations (hb)/pratap, H. /2023 Copies 1 562 Organization And Leadership In Disruptive Times / Fallahchay/2023 Copies 1 563 Organization Development 2nd Ed. / Flores M., & Ducut, R./ 2023 Copies 1 564 Organizational Behavior, International Adaptation \3ed. / Uhl-bien, Mary / 2024 Copies 1 565 Organizational Management/ Copies 5 566 Organometallic Chemistry / Srivastava/2023 Copies 1 567 Oxford Handbook Of Confucianism, The / Oldstone-moore, Jennifer / 2023 Copies 1 568 Pagbasa At Pagsusuri Sa Iba’t Ibang Teksto Tungo Sa Pananaliksik/sanchez/2023 Copies 2 569 Pagtuturo Mula Sa Puso/liwanag/2023 Copies 3 570 Pananaliksik-wika At Panitikan (isang Komprehensibong Gabay Sa Pag Unawa…)/de Leon/2021 Copies 1 571 Panimulang Lingguwistika (pandalubhasaan)/lonez, Et.al/2021 Copies 2 572 Partnerships And Corporations (revised Corporation Code Of The Philippines)/fidelito R. Soriano/2021 Copies 1 573 Passion To Bake: Baking Guide For Beginners, Revised /edition/gabriel & Banzel/2023 Copies 2 574 Personal Finance (hb)/singh, L./2023 Copies 1 575 Personal Finance/ma. Elenita Balatbat Cabrera Et Al./2022 Copies 1 576 Personhood Education/bercanalo/2020 Copies 1 577 Perspectives Of Sociology In Education / Higgins/2024 Copies 1 578 Philippine Regional Cuisine/melchor/vizconde/2021 Copies 1 579 Philippines Culture And Tourism Geography/ Yeung., M./2022 Copies 1 580 Philippines Disaster Risk Reduction And Management System With Related Laws And The Constitution/atty. Thorrsson M. Keith/2023 Copies 1 581 Physical Activities Towards Health And Fitness Pathfit 2/ Ballecer, M.,et.al./2023 Copies 2 582 Physical Activity Towards Health & Fitness 1(path-fit 1)/punzalan, M. Et.al/2023 Copies 2 583 Physical Activity Towards Health & Fitness 3 (path-fit 3)/punzalan,m./2023 Copies 2 584 Physical Activity Towards Health & Fitness (path-fith 2)/bulatao,m. Et.al/2023 Copies 2 585 Physical Activity Towards Health And Fitness (path- Fit Dance) Bulatao,m. Et.al 2022 Copies 2 586 Physical Activity Towards Health And Fitness (path- Fit 4 Sports)/bulatao,m. Et.al/2023 Copies 2 587 Physical Education And Health /latorre,m. Et.al./2023 Copies 1 588 Physical Education And Sport Psychology / Livadas/2024 Copies 1 589 Physical Education Study Of Administration / Done/2024 Copies 1 590 Physical Education Study Of Applied Statistics / S.c. Bishep/2024 Copies 1 591 Physical Education, Exercise Science And Sport/liam Owens/2020 Copies 1 592 Physical Geology, / C. Plummers / 2022 Copies 1 593 Physical Science 4th Ed./ 3g E./ 2023 Copies 1 594 Plane Geometry With Basic Trigonometry A Simplified Approach/ Sarmiento, F. 2022 Copies 1 595 Plant Anatomy And Characteristics Of Soil, Water & Fertilize / Hug, Laura / 2024 Copies 1 596 Plant Anatomy And Palynology (hb)/singh, R./sharma, I./2023 Copies 1 597 Plant Biotechnology (hb)/singh, A.k. /2023 Copies 1 598 Plant Biotechnology Transgenic Plants / Anderson/2020 Copies 1 599 Plant Cell And Tissue Culture A Tool In Biotechnology / Homenick/2020 Copies 1 600 Plant Conservation Biotechnology / Cassin/2020 Copies 1 601 Plant Diseases And Their Biological Control / Moore/2020 Copies 1 602 Plant Molecular Biology And Biotechnology (hb)/pratap, N. /2023 Copies 1 603 Plant Pathology And Microbiology (hb)/choudhary, L. Et.al/2023 Copies 1 604 Poetry Book, The: Big Ideas Simply Explained / Dk / 2023 Copies 1 605 Post-harvest Science And Technology Of Horticultural Crops / Barnard, Allen Copies 1 606 Poultry Cooling System/sharma, Y./2019 Copies 1 607 Power Of Evolved Leader, The \1ed.: Inspire Top Performance By Fostering Inclusive Teams / Young, Stephen / 2024 Copies 1 608 Power Of Instructional Coaching In Context, The \1ed./ippolito, Jacy / 2024 Copies 1 609 Power Plant Diesel Laboratory Manual / Singuit/2024 Copies 1 610 Practical Guide To Theoretical Frameworks For Social Science /bingham, Andrea J. / 2022 Copies 1 611 Practical Manual Of Soil Biology And Biochemistry / Brown, Darrell / 2024 Copies 1 612 Practical Professional Cooking / Prakash/2023 Copies 1 613 Practical Research 1 Qualitative Research Revised Edition/francisco, Et.al/2022 Copies 1 614 Practical Research 1/maranan, Et.al/2023 Copies 2 615 Practical Research 2 Quantitative Research Revised Edition /francisco, Et.al/2022 Copies 1 616 Practical Research 2/jovid Maricar D. Maranan Et., Al./2023 Copies 2 617 Practice Educator's Handbook, The \6ed. / Williams, Sarah / 2024 Copies 1 618 Practice Makes Perfect Basic English \4ed.: Total Language Study Program / Lachance, Julie / 2024 Copies 1 619 Practicum Manual College Of Hospitality And Tourism Management / Loida R. Banzuelo & Maria Rhoda D. Dinaga 2022 Copies 1 620 Practicum Manual For Tourism And Hospitality Management / Reymar C. Taoing & Imee L. Cabugon/2023 Copies 2 621 Pre- Calculus, 3rd Ed., / 3g E./ 2023 Copies 1 622 Prevention & Treatment Of Sports Injuries / S. Santos / 2023 Copies 1 623 Pricing Strategy/marife Agustin-acierto And Gilfred Abad Acierto/2022 Copies 1 624 Principles & Practice Of Management & Organizational Behavior / Singh, Chandrani / 2024 Copies 1 625 Principles And Breeding Techniques In Horticulture Crops / Clintock, George / 2024 Copies 1 626 Principles And Concepts Of Political Theory / Parker/2024 Copies 1 627 Principles Of Bioeconomics, V. Pande , 2023 Copies 1 628 Principles Of Management & Organization / Pereda, P. & Perada, P., /2021 Copies 1 629 Principles Of Marketing, 4th Ed./ 3g E./ 2023 Copies 1 630 Principles Of Power Electronics \2ed. / Kassakian, John G. / 2024 Copies 1 631 Probiotics In Poultry Production/singh, R./2019 Copies 1 632 Production Technology Of Spices And Plantation Crops/beatty, E./2023 Copies 1 633 Professional C++ \6ed. / Gregoire, Marc / 2024 Copies 1 634 Professional Development A Guide To Career Success/ Ethel Magalona, Et.al/2023 Copies 2 635 Professional Development And Applied Ethics/ Jhon Paul Buenaventura. Et.al/2022 Copies 3 636 Professional Development/cabulay/2023 Copies 5 637 Professional Salesmanship/mecmack Nartea/2024 Copies 1 638 Program Management: Going Beyond Project Management To Enable Value-driven Chang / Zeitoun, Al / 2024 Copies 1 639 Programming & Gui Fundamentals. / S. L. Triphati / 2023 Copies 1 640 Project And Programmed Management/guilherme Da Silva, F. /2024 Copies 1 641 Promoting Community Change Through Civic Welfare Training Service 2/briones, Et.al/2024 Copies 1 642 Psychological Employed In Sports And Physical Education / Patrick/2024 Copies 1 643 Psychological Testing: Theoretical Perspectives And Practical Applications / Harrison /2024 Copies 1 644 Psychology And Gender \1ed.: An Advanced Reader / Natu, Sandhana Avinash / Copies 1 645 Psychology And You/frando And Isip/2022 Copies 2 646 Psychology Of Human Sexuality, The \3ed. / Lehmiller, Justin J./ 2024 Copies 1 647 Psychology Of Public Administration / Pathak/2023 Copies 1 648 Psychology Science Of Mental Health / Wilkinson/2024 Copies 1 649 Psychology, Themes & Variation, 11th Ed./ W. Weiten Copies 1 650 Public Administration And Rural Development / Singh/2023 Copies 1 651 Public Safety And Criminal Justice System/ Keith, T. & Montemayor, J. / 2023 Copies 1 652 Purpose Driven Learning / A. Moreno/ 2023 Copies 1 653 Purposive Communication 3rd Edition With Dvd/3g E-learning/2023 Copies 1 654 Purposive Communication In Diverse Contexts / Josue/2023 Copies 2 655 Purposive Communication In The Now, 2nd Edition/a.c. Africa/2022 Copies 2 656 Purposive Communication Revised Edition/zoleta/ Binay-an/2023 Copies 2 657 Purposive Communication/lim/2019 Copies 2 658 Python Programming (hb)/patidar, V. Et Al. /2024 Copies 1 659 Quality Service Management In Tourism And Hospitality / Buslon/ Osorno / 2023 Copies 1 660 Quality Service Management In Tourism And Hospitality 2nd Edition/ Chester Dave G. Arenas/ 2022 Copies 1 661 Quality Service Management/cornell/2020 Copies 1 662 Quantity Cookery And Catering Management ( A Guide To Students, Leading To Commercial Cooking Nc Iii)/barateta-prades/2023 Copies 2 663 Quantity Food Production: A Guide For Commercial Cooking Nc Ii/entrata, Et.al/2022 Copies 1 664 Quick Food Service Operations/etrata, Et.al/2022 Copies 1 665 Raising An Adhd Child: A Handbook For Parents Of Distractible, Dreamy & Defiant Chi. / O'regan, Fin / 2024 Copies 1 666 Reach Every Athlete: A Guide To Coaching Players With Hidden Disabilities And Con / Stanley, Christopher / 2023 Copies 1 667 Reading And Writing Skills/cabana-basilan, M./2022 Copies 1 668 Reading In The Philippine History/candelaria/2021 Copies 1 669 Readings In Philippines History/ Dela Vega, P./2024 Copies 1 670 Reasoning Mathematical Theory And Metrics / Castillo/2023 Copies 1 671 Recruitment And Selection/ Margarita R. Saidali Et Al./2021 Copies 1 672 Regression Modeling For Predictions In Time Series / Owens/2024 Copies 1 673 Remaining Student Engagement, / A. Berry / 2023 Copies 1 674 Remote Sensing And Gis Application In Crop Mapping / Khosravi, Iman / 2024 Copies 1 675 Remote Sensing And Gis Applications In Natural Resources: Management / Coops, Nicholas / 2024 Copies 1 676 Research 101 Notes And Style Guide In Thesis And Dissertation Writing For The Filipino Students/jaime Gutierrez-ang/2023. Copies 2 677 Research Development In World Englishes / Onysko, Alaxander / 2024 Copies 1 678 Research In Tourism /grant B. Cornell Et., Al. /2023 Copies 1 679 Research In Tourism And Hospitality/ Lolita Mendoza/2022 Copies 1 680 Research In Tourism/cornell/2021 Copies 1 681 Research Methodology: Agro Science/gupta, A./2023 Copies 1 682 Research Methods In Social Science / Malone/2024 Copies 1 683 Research Methods. In Physical Activity 8th Ed. / J. Thomas. / 2023 Copies 1 684 Research Writing Made Easy Coping Strategies In Research Writing Obe Approach/cabana-basilan/2022 Copies 2 685 Revenue Management/ Jose, I./2024 Copies 1 686 Reviewer For The Civil Service Examination (professional And Sub Professional Levels)/ Duka, C./2024 Copies 1 687 Reviewer For The Licensure Examination For Professional Teacher (lept)/ Cecilio D. Duka, /2023 Copies 1 688 Revisiting Readings In Philippine History/ Baes, A. & Francisco, J./2023 Copies 1 689 Risk Management As Applied To Safety, Security, And Sanitation/ricaforte Et., Al./2020 Copies 1 690 Risk Management As Applied To Safety, Security, And Sanitation/ Yeung, M./2023 Copies 1 691 Risk Management/ricaforte/2020 Copies 1 692 Rizal And The Development Of Filipino Nationalism/garcia, C. Et Al., /2023 Copies 1 693 Rizal Without The Overcoat/ambeth R. Ocampo/2022 Copies 1 694 Role Of Genetic Engineering In Insect Pest Management / Hatfield, Henry / 2024 Copies 1 695 Role Of Modern Technology In Agriculture / Kandel/2024 Copies 1 696 Role Of Soil Fertility, Renewal And Preservation In Biodynamic / Schoenau, Jeff / 2024 Copies 1 697 Romantic Literature Of 18th Century In English / Barnes/2024 Copies 1 698 Room Division Cost Control/chester Dave G. Arenas/2022 Copies 1 699 Rural Management / Fernandes/2023 Copies 1 700 Sales Management, Strategies & Processes/ E. Dunlap / 2020 Copies 1 701 Sales Marketing And Pr In Service Industry, 2020 Copies 1 702 Sangguniang Aklat Ng Gramatika At Pagbuo Ng Mapa/alvarado Et Al/2023 Copies 1 703 Scholarly Leadership In Higher, / W. Urban/ 2021 Copies 1 704 School Culture With Organization Vignettes/llagas & Corpuz/2020 Copies 1 705 Science Of Movement Exercise, And Mental Health, The / Pilotti, Jennifer / 2023 Copies 1 706 Science Technology And Society/alata/2021 Copies 1 707 Science, Technology & Society A Rudimentary Approach/magalona, Et.al/2020 Copies 1 708 Science, Technology And Society/ Aldea, K. / 2022 Copies 1 709 Second Language Literacy Pedagogy: A Sociocultural Theory Perspective / Urbanski, Kimberly Buesch / 2023 Copies 1 710 Sedimentary & Stratigraphy, / G. Nichols/ 2023 Copies 1 711 Serving Educational Equity: / Murray-darden, Sonya / 2023 Copies 1 712 Sexual Harassment & Lorsiw/ Atty. Josephus B. Jimenez & Atty. John Paul S. Jimenez/2023 Copies 1 713 Shielded Metal Arc Welding / Kumar / 2023 Copies 1 714 Shielded Metal Arc Welding Tesda Competency Based/espina,et.al/2021 Copies 1 715 Simplified Engineering Thermodynamics For Thermodynamics 1 And 2/ Tordillo, J. 2019 Copies 1 716 Simpol The Cookbook/sarthou Copies 1 717 Sinesosyedad: Panunuri Ng Piling Pelikulang Panlipunan/de Leon/2023 Copies 1 718 Social Aspects Of Aging In Indigenous Communities / Lewis, Jordan P. / 2021 Copies 1 719 Social Capital And Business Management: When People Really Do Matter / Warne/2023 Copies 1 720 Social Media Marketing 3re Ed. / Barker / 2023 Copies 1 721 Soil Engineering An Introduction / Khitoliya/2023 Copies 1 722 Soil Fertility Management For Sustainable Agriculture / Altenwerth/2020 Copies 1 723 Soil Pathogenic Behavior In Roots / Molloy, Les / 2024 Copies 2 724 Spanish For Beginners/ Perez, R./2024 Copies 1 725 Speech And Theater Arts Obe-based/blanco, Et.al/2022 Copies 2 726 Sports And Exercise Science Basics / Kenneth W. /2024 Copies 1 727 Sports And Physical Education Management / Phillips/2024 Copies 1 728 Sports Broadcasting, / Hull / 2022 Copies 1 729 Sports Ministry / Lewis, David B. / 2024 Copies 1 730 Start Strong, Succeed Fast Marketing For Beginners/josiah Go Et.al/2024 Copies 2 731 Startup Guide: Restaurant \2ed. / 3g / 2023 Copies 1 732 Statistical Methods And Biometrical Techniques In Plant Breeding/nimitha, K. & Francis, N./2021 Copies 1 733 Statistical Methods For Agricultural Workers (hb)/singh, P./2023 Copies 1 734 Statistics For Business And Management/matt Martin/2021 Copies 1 735 Statistics Using Strata \3ed.: An Integrated Approach / Weinberg, Sharon / 2024 Copies 1 736 Strategic Approach In Organizational Behavior/sharma, J./2022 Copies 1 737 Strategic Business Analysis/eunice Mareth Q. Areola Et Al./2023 Copies 1 738 Strategic Management Competitiveness And Globalization Concepts And Cases/ Hitt, M./ 2023 Copies 1 739 Strategic Management Concepts And Applications/ Ma. Elenita Balatbat Cabrera Et Al./2022 Copies 1 740 Strategic Management For Tourism, Hospitality & Events \4ed /evans, Nigel G. / 2024 Copies 1 741 Strategic Management In Tourism And Hospitality W/ Total Quality Management/ Magpantay, D./2022 Copies 1 742 Strategic Management/ Mary Chris Austria Et Al./2024 Copies 2 743 Strategic Management/danilo F. Marcelo Jr./2020 Copies 1 744 Strategic Management: From Confrontation To Transformation / Volberda, Henk W. / 2024 Copies 1 745 Strategic Marketing Management: Simplified Moves For Rookies/girly H. Naval/2021 Copies 1 746 Strategic Planning And Policy (pb) /gabriel Afemei/2024 Copies 1 747 Strength And Conditioning / J. Cissik / 2020 Copies 1 748 Strength Of Materials / John/2024 Copies 1 749 Stress Management: Developing Resilience In An Evolving World / Mitchell, Pardness / 2024 Copies 1 750 Structures Of English/dapat, Et.al/2021 Copies 1 751 Study Of Microbial Physiology And Genetics / Robertson, Bryant / 2024 Copies 1 752 Study Of Microorganisms In Soil And Water / Huck, Peter / 2024 Copies 1 753 Study Of Plant Responses To Abiotic Stress / Wilson, Linus Copies 1 754 Study Of Socio Linguistics / Wynne / 2024 Copies 1 755 Studying For An Early Childhood Degree \1ed.: Using Inspirations From The Pen Green Students To Achieve Ou /gallagher, Tracy / 2023 Copies 1 756 Styling And Treatment Of Hair / 3g / 2023 Copies 1 757 Supervision In The Hospitality Industry, 3rd Ed./ 3g E. / 2023 Copies 1 758 Supply Chain And Logistics Management: Enhancing Competitive Edge & Customer Satisfaction/ Ernesto H. Mendoza & Lorma S.p. Garcia/2020 Copies 1 759 Supply Chain Management In Hospitality Industry 2nd Edition/ Kyla S. De Castro//2024 Copies 1 760 Supply Chain Management/baluyot/2022 Copies 1 761 Supply Management In Hospitality Industry/ Baluyot/2022 Copies 1 762 Survey Of Afro-asian Literature Obe-based/escalada-cordova/2024 Copies 2 763 Surveying / Dsouza/2024 Copies 1 764 Sustainable Development, Education And Learning / Thoresen, Victoria W. / 2023 Copies 1 765 Sustainable Tourism/mary Grace C. Santos/2023 Copies 2 766 Synergizing E-commerce, Social Media, And Drop Shipping: Navigating The Path To Success & Customer Satisfaction/lorma S.p. Garcia/2023 Copies 1 767 Systems Analysis And Design 3rd Ed / 3g E-learning / 2023 Copies 1 768 Teacher Education A Call And Concern / Hota/2024 Copies 1 769 Teaching An Assessment Of Grammar/ Manas, J/ 2024 Copies 1 770 Teaching And Assessment Of Literature Studies 1e/domingo-bontoc, Et.al/2024 Copies 1 771 Teaching And Assessment Of The Macro Skills/alda, Et.al/2022 Copies 2 772 Teaching English In Elementary Grade (language Arts)/reyes/2021 Copies 1 773 Teaching Internship Obe -& Ppst-based/borabo, M/2022 Copies 2 774 Teaching Internship/reyes/2021 Copies 1 775 Teaching Learners With Sensory/manuel/2021 Copies 1 776 Teaching Literacy In The Elementary Grades Through Literature/bulusan/2021 Copies 1 777 Teaching Literacy In Trouble Times, / A. Skerrett / 2023 Copies 1 778 Teaching Math In Intermediate Grade/gusano/2020 Ed. Copies 1 779 Teaching Mathematics Conceptually. / B. Mc Donald / 2023 Copies 1 780 Teaching Mathematics In The Intermediate Grades Obe-based/camarista, G. & Oranio, I./2020 Copies 1 781 Teaching Multi Grade Classes Obe-based/montalbo, Et.al/2022 Copies 1 782 Teaching Music In Elementary Schools/roldan/2021 Copies 1 783 Teaching Primary Science/mingoa/2021 Copies 1 784 Teaching Profession/abulencia/2020 Copies 2 785 Teaching Secondary & Middle School Mathematics \7ed. / Brahier, Daniel J. / 2024 Copies 1 786 Teaching Strategies In Teaching Science /alta/2020 Copies 1 787 Teaching Well \1ed.: Understanding Key Dynamics Of Learning-centered Classrooms / Brookfield, Stephen D. / 2023 Copies 1 788 Teaching: Dilemmas, Challenges And Opportunities \7ed. / Ewing, Robyn / 2023 Copies 1 789 Technical English: Technical Report Writing And Presentation / Hoda/2023 Copies 1 790 Technological Perspective Of Education And Curriculum Development / Wilson/2024 Copies 1 791 Technology For Teaching And Learning 1 /ballado, Et.al/2023 Copies 4 792 Technology For Teaching And Learning 1/bruza/2021 Copies 1 793 Technology For Teaching And Learning 2 Mathematics And Science Education Obe-& Ppst Based/espique& Silva/2021 Copies 1 794 Technology Of Horticulture Precision Farming / Buckler, Carlyn / 2024 Copies 1 795 Textbook Bacterial Diseases In Plants / Walter, Jack / 2024 Copies 1 796 Textbook In Business Finance/solita A. Frias/2023 Copies 1 797 Textbook Of Agricultural Biotechnology / Wakefield, Alan / 2024 Copies 1 798 Textbook Of Farm Animal Reproductive-biotechnology / Farstad, Wenche / 2024 Copies 1 799 Textbook Of Soil Microbiology / Bernier, Waldo / 2024 Copies 2 800 The Addiction Treatment Planner, / Bruce / 2022 Copies 1 801 The Anxiety Healers Guide/seponara, A./2022 Copies 1 802 The Complete Book Of Tailoring / Pushpanjali / 2023 Copies 1 803 The Complete Guide To Plumbing/paolo Lindhagen Copies 1 804 The Contemporary World/gonzales, C./2024 Copies 1 805 The Course Module For Child And Adolescence Learners And Learning Principle/mingoa/2021 Copies 2 806 The Distance Learning Playbook For College And University Instruction/fisher, D., Et Al./2021 Copies 1 807 The Entrepreneur/saidali/2021 Copies 1 808 The If In Life/ Stratahan, M./ 2018 Copies 1 809 The Law On Income Taxation/hector S. De Leon/2022 Copies 1 810 The Life And Works Of Jose Rizal -based/porras, Et.al/2022 Copies 2 811 The Power Of A Rich Reading Classroom, / A. Chambers / 2020 Copies 1 812 The Science Of Plants / Chavan/2023 Copies 1 813 The Self-healing Mind An Essential Five-step Practice For Overcoming Anxiety And Depression, And Revitalizing Your Life/brown/2022 Copies 1 814 The Super Quick Guide To Learning Theories & Tech. / A. Goldhawk Copies 1 815 The Teacher And The School Curriculum/fernando & Oamil/2022 Copies 2 816 The Teaching And Assessment Of Literature Studies/ Bacus, R./2022 Copies 1 817 The Teaching Profession/ Gela M. Lomibao/2023 Copies 2 818 The Teaching Profession/ Madeline T. Fernando Et., Al. /2024 Copies 1 819 The Teaching Profession/ Ortinero-gallardo, B. & Manas, J., /2022 Copies 1 820 The Teaching Profession/fernando, Et.al/2024 Copies 2 821 The Teaching Profession/gallardo, Mañas/2022 Copies 1 822 The Therapeutic Use Of Selpin Counseling & Psychology. / L. Finlay Copies 1 823 The Twentieth And Twenty-first Centuries A Textbook Of English Literature / Kieran/2024 Copies 1 824 The Wish/nicholas Sparks/2021 Copies 1 825 Theoretical And Practical Textbook On Lesson Planning/sanchez/2024 Copies 1 826 Theory And Training Of Automative Technician / Sharma/2023 Copies 1 827 Theory Of Modern Educational Technology And Quality Education / Robbins/2024 Copies 1 828 Theory Of Number / Fincke/2024 Copies 1 829 Thesis And Dissertation Writing Made Easy / Mendoza, E & Bolotaolo, R. /2023 Copies 3 830 Thesis Writing And Feasibility Study For Business And Accountancy/ Don M. Magpantay & Agusto R. Matias/2023 Copies 2 831 Thomas' Calculus, Si Units \15ed. / Hass, Joel R. / 2023 Copies 1 832 Total Quality Management For Tourism And Hospitality Obe Approach/ Martin, M./ 2021 Copies 1 833 Total Quality Management/angelita Ong Camilar-serrano/2023 Copies 1 834 Tourism And Hospitality Marketing/badilla/2021 Copies 1 835 Tourism Policy Planning And Development / Brion, J. Et,. Al./2022 Copies 1 836 Tourism Product Development / Vizconde A., /2022 Copies 1 837 Tourism, Knowledge And Learning \1ed.: Conceptual Development And Case Studies / Jernsand, Eva Maria / 2023 Copies 1 838 Training And Development/ Marivic F. Flores Et Al./2023 Copies 2 839 Transcendence: Understanding Contemporary Global Dynamics, Issues, And Challenges/calilung And Coronacion/2024 Copies 1 840 Transfer & Business Taxation/enrico D. Tabag & Earl Jimson R. Garcia/2023 Copies 1 841 Transgenic Technological Advances In Farmed Animals / Turner, Taylor / 2024 Copies 1 842 Transgenic Technological Advances In Farmed Animals / Wolf, E. Copies 1 843 Travel Writing And Photography/ Vizconde M. Et.al. 2022 Copies 1 844 Trends And Issues In Social Studies Obe-& Research-based/dizon, Arnie G./2022 Copies 3 845 Trends And Issues In Tourism And Hospitality/ Borbon, N. Et.al/2022 Copies 1 846 Trust: A Novel / Diaz, Hernan / 2022 Copies 1 847 T-sql Fundamentals \4ed.: Professional / Ben-gan, Itzik / 2023 Copies 1 848 Ugat: Textbook In Readings In Philippine History/ Edward Benrick Salogan/2023 Copies 2 849 Understanding Abnormal Behavior 12th Ed./ Sve / 2022 Copies 1 850 Understanding Animal Disorders, A Clinical Approach/gopaiah, K.v/2021 Copies 1 851 Understanding Gifted Talented Learners/bawilen/2021 Copies 1 852 Understanding Marketing Research/ruby F. Alminar-mutya/2024 Copies 1 853 Understanding Research Design And Methods / Molines-siniguian, M. Et Al. /2023 Copies 2 854 Understanding The Self/dula/2023 Copies 2 855 Unraveling The Absolute Moral Principle: Ethics For Filipino Students Revised Ed./buenaflor, Et.al/2024 Copies 1 856 Upscaling Oral Communication Skills In The 21st Century Global Space/gutierrez, Et.al/2024 Copies 1 857 Urban Ecology: An Introduction \2ed. / James, Philip / 2024 Copies 1 858 Values Education: Legal And Ethical Perspective 2e/penaflor/2023 Copies 1 859 Vertebrate Zoology. / T. Marquez / 2023 Copies 1 860 Viral Diseases In Plants/ Chauhan, N. & Sngh, C./2022 Copies 1 861 Viruses & Society/ P. Melloy Copies 1 862 Web Application Using Php & Mysql/allexander B. Pahayahay/2024 Copies 2 863 Web Engineering. / 3ge / 2023 Copies 1 864 Web Programming Using Php & Mysql/ Harley V. Lampawog & Jake R. Pomperada/2021 Copies 2 865 Welding 101 Basic Inputs On Shielded Metal Arc Welding For Beginners Tesda Competency Based/espina, Et.al/2021 Copies 1 866 Welding Basics /3g / 2024 Copies 1 867 Western Cuisine/dinaga, Et.al/2022 Copies 1 868 World Almanac And Book Of Facts 2024: #1 New York Times Bestseller / Janssen, Sarah / 2024 Copies 1 869 Zoological Characteristic & Behavior, P. Coelno./ 2023 Copies 1 870 Zoology Study Of The Animal Kingdom, / K. Porter / 2023 Copies 1 871 Zoology, 12th Ed./ Stech. Miller Copies 1

Details: Department Of Veterans Affairs va Rocky Mountain Network (visn19) performance Work Statement (pws) â regulated Medical Waste, Trace Chemotherapy, Non-hazardous Pharmaceutical, And Pathological Waste Removal 1.0. Introduction the Va Rocky Mountain Network Is Located In Glendale, Colorado, And Was Established In March 1996 As One Of 21 Veterans Integrated Service Networks (visns) In The Veterans Health Administration. The Va Rocky Mountain Network Is Visn 19 And Functions As The Responsible Structure For The Planning, Budgeting, And Service Delivery In The Provision Of Healthcare To Veterans Within Our Geographic Region. visn 19 Spans A Geographic Area Of 540,000 Square Miles Across 10 States And Is The Largest Visn In Terms Of Geographic Area In The 48 Contiguous States. Visn 19 Serves An Area Covering The States Of Utah, Montana, Wyoming, Colorado, Oklahoma And Portions Of Idaho, Kansas, Nebraska, Nevada And North Dakota. The Topography Includes The Rocky Mountains, Arid Regions And Areas Subject To Extreme Winter Weather. Significant Travel Distances Exist Between Va Healthcare Facilities Throughout Visn 19. It Is Estimated Over 1,000,000 Veterans Reside Within Visn 19's Geographic Boundaries. 2.0. Scope Of Work â  contract To Provide Services For Eight (8) Va Medical Centers (vamc) And Approximately Seventy-six (76) Additional Sites Of Care To Include Community Based Outpatient Clinics (cboc), Community Living Centers (clc), Primary Care Tele-outreach Clinics (pctocs) And Healthcare Centers (hcc) Located In Visn 19, In Accordance With Current Federal, State And Local Regulations. This Will Include Any Proposed Or Newly Constructed Sites That May Be Included After The Award. The Contractor Shall Provide All Labor, Supervision, Equipment, Training, And Protective Equipment To Properly Pickup And Dispose Regulated Medical Waste (rmw) To Include Trace Chemotherapy, Non-hazardous Pharmaceuticals, And Pathological Wastes With All Federal (including Va Regulations), State, And Local Regulations For The Below Listed Location(s) Of Performance. this Will Be Awarded As A 5-year Idiq (indefinite Delivery Indefinite Quantity) Contract That Will Run Five (5) Years From Date Of Award To 12/31/2029. Minimum Guarantee For This 5-year Idiq Is The Disposal Of 200 Tons Of Waste Per Year. Maximum For This 5-year Idiq Is The Disposal Of 500 Tons Of Waste Per Year. The Government Reserves The Right To Award One Or More Contracts Resulting From This Solicitation. unit Pricing Must Include: All Labor/personnel, Any 96-gallon Reusable Roll-offs, Bags, Labeling, Manifest, Transportation, Treatment, And Disposal At An Approved Facility In Accordance With All Federal, State And Local Regulations. 2.1 Definitions regulated Medical Waste (rmw): Liquid Or Semi-liquid Blood Or Other Potentially Infectious Materials; Contaminated Items That Would Release Blood Or Other Potentially Infectious Materials In A Liquid Or Semi-liquid State If Compressed; Items That Are Caked With Dried Blood Or Other Potentially Infectious Materials And Are Capable Of Releasing These Materials During Handling; Contaminated Sharps; And Pathological And Microbiological Wastes Containing Blood Or Other Potentially Infectious Materials. other Potentially Infectious Materials: (opi) Means; the Following Human Body Fluids: Semen, Vaginal Secretions, Cerebrospinal Fluid, Synovial Fluid, Pleural Fluid, Pericardial Fluid, Peritoneal Fluid, Amniotic Fluid, Saliva In Dental Procedures, Any Body Fluid That Is Visibly Contaminated With Blood, And All Body Fluids In Situations Where It Is Difficult Or Impossible To Differentiate Between Body Fluids; any Unfixed Tissue Or Organ (other Than Intact Skin) From A Human (living Or Dead); And hiv-containing Cell Or Tissue Cultures, Organ Cultures, And Hiv- Or Hbv-containing Culture Medium Or Other Solutions; And Blood, Organs, Or Other Tissues From Experimental Animals Infected With Hiv Or Hbvopi. sharps Means Any Contaminated Object That Can Penetrate The Skin Including, But Not Limited To, Needles, Scalpels, Broken Glass, Broken Capillary Tubes, And Exposed Ends Of Dental Wires pathological Waste Consists Of Tissues, Organs, Body Parts, Human Fetuses And Animal Carcasses, Blood, And Body Fluids And Must Be Treated Through Low Level Incineration. trace Chemotherapy Waste: Are Non-hazardous Pharmaceuticals That Are Less Than 3% Volume Of A National Institute For Occupatoinal Safety And Health (nisoh) Niosh Page Table 1 Hazardous Drug Or A Facility Determined Hazardous Drug Per The U.s. Pharmacopeia (usp) 800 Standard In It S Orgininal Container, Iv-solutions Or Other Adiministrative Methods And The Personal Protective Equipment Used To Administer The Drug. It Also Includes Soiled Chux Pads And Diapers Of Patients Receiving Chemotherapy From Start Of Therapy To 48 Hours After Last Dose. non-hazardous Pharmaceutical Waste: Medications That Do Not Meet The Epa Definition Of A Hazardous Waste In In §266.500. Includes Over-the-counter Pharmaceutical, Dietary Supplement, Or Homeopathic Drugs Which Are Not A Solid Waste, As Defined In §261.2, And Therefore Not A Hazardous Waste Pharmaceutical, If It Has A Reasonable Expectation Of Being Legitimately Used/reused (e.g., Lawfully Redistributed For Its Intended Purpose) Or Reclaimed. Forms May Include Vials, Syringes, Pills, And And Needles Assoricated With It S Administration. 2.2. Medical Waste Requirements the Contractor Shall Provide Labor, Transportation, Collection, Removal, Treatment And Destruction For The Disposal Of All Rmw Generated By The Listed Visn19 Medical Centers, Their Cbocs, Clcs, Hhcs And Pctocs As Specified In This Pws And Cost/price Schedule In Accordance With The Terms And Conditions Of This Contract. Performance Will Be According To The Requirements Contained In This Pws. services Shall Also Include The Option For Mail-in Disposal From Rural Clinics. This Service Shall Provide All Required Labeling And Packaging. vamcs, Cbocs, Clcs, Hhcs, And Pctocs Will Be Responsible For Properly And Lawfully Filling And Storing The Rmw. Vamcs, Cbocs, And Pctocs Shall Store The Full Rmw In Containers Supplied And Approved By The Contactor. Infectious Medical Waste Containers Shall Be Leak Proof, Have Tight-fitting Covers, And Be Kept Clean And In Good Repair. The Storage Of Rmw Shall Be Confined To An Area On The Premises To Which Only Authorized Personnel Shall Have Access. visn 19 Facilities Also Require The Disposal Of Wastes The Require Low-grade Incineration To Include: trace Chemotherapy non-hazardous Pharmaceuticals pathological Waste, Including Animal Carcasses all Work Shall Be Accomplished In Accordance With Va, Federal, State, And Local Regulations. The Applicable Regulations That Are Included But Not Limited To Are The Following: veterans Health Administration (vha) Directive 1850.06 Waste Management Program veterans Administration (va) Directive 0057 Va Environmental Management Program blood Borne Pathogen Standard (osha), 29 Cfr 1910.1030 hazard Communication Standard (osha), 29 Cfr 1910.1200 department Of Transportation (dot), 49 Cfr 172 montana Annotated Code (mca), 75-10-1005 utah S Annotated Code (uac), R315-316-1, R315-316-4, And R315-315-5(2)(a) colorado 6 Ccr 1007-2 Section 13 oklahoma Administrative Code (oac) 252:515-23 2.4. Schedule 2.4.1. Pick-up Times the Contractor Shall Pick-up Rmw Between The Hours Of 8:00 Am Through 4:30 Pm On Regular Clinic Days, Expect Hamilton, Mt That Is Only Open Until 2:30pm. The Contactor Shall Not Pick-up Medical Waste Outside Of The Designated Hours. The Scheduled Pick-up Times Will Be Mutually Agreeable To Both Parties. The Contractor Is Responsible For Notifying The Appropriate Government Official At Each Site For Arrangements For The Pick-up Of The Rmw. If Routine Pick-up Is Scheduled On A Recognized Government Holiday, Then The Pick-up Must Be Rescheduled And Picked-up Either Within Three (3) Days Before Or After The Holiday. The 11 National Holidays Observed By The Federal Government Or Any Other Day Specifically Declared By The President Of The United States To Be A National Holiday. 2.4.2 Locations & Frequencies the Government Reserves The Right To Modify The Contract As Needed To Add Or Delete Va Locations, Frequencies, Or Product Categories. estimates Are Given In 48-gallon Overpack Containers For Consistency, But Contractor Shall Be Able To Provide A Variety Of Sizes To Accommodate Facility Needs. Facilities May Generator More Or Less Of These Estimates. name/location name street city, State, Zip frequency Of Pickups total Of (48gal) Overpack Picked Up Each Time Of Rmw additional Rmw Subcategories: Trace Chemo, Non-hazardous Pharmaceutical, And/or Pathological total (48gal) Overpack Of Additional Incineration Waste During Rmw Pickup 96gal Transporter poc On Site sheridan Va Medical Center 1898 Fort Road sheridan, Wy 82801 monthly 20 trace Chemotherapy and non-hazardous Pharmaceutical 4 na housekeeping =1 307 763 3641 afton Cboc 125 South Washington Afton Wy. 83110 quarterly 2 na na na office Staff- 1 307 886 5266 casper Cboc 4140 South Poplar Street casper, Wy 82601 monthly 4 na na na office Staff 1 307 235 4143 riverton Cboc 2300 Rose Lane riverton, Wy 82501 monthly 2 na na na office Staff 1 307 857 1211 gillette Cboc 604 Express Drive gillette, Wy 82718 monthly 3 na na na office Staff 1 307 685 0676 rock Springs Cboc 1401 Gateway Blvd. #1 rock Springs, Wy 82901 monthly 3 na na na office Staff 1 307 362 6641 evanston Pctoc evanston Valley Business Park 1565 South Highway 150#e evanston, Wy 82930 quarterly 1 na na na office Staff 1 307 789 3384 worland Pctoc 510 South 15th, Suite D worland, Wy 82401 quarterly 1 na na na office Staff 1 307 347 2808 cody Cboc 1432 Rumsey Ave Cody Wy 82414 monthly 2 na na na office Staff 1 307 587 4015 okc Va Medical Center (west Dock) 1921 Ne 13th St oklahoma City Ok 73104 tri-weekly (3 Times Per Week) 20 trace Chemotherapy And Pathological 8 25 thomas Welby 405-456-5026 ada Va Clinic 717 Better Now Plaza ada, Ok 74820 monthly 2 na na na 580-436-2262 altus Va Clinic 1604 North Main altus, Ok 73521 monthly 2 na na na 580-482-0721 ardmore Va Outpatient Clinic 1235 12th Avenue Northwest ardmore, Ok 73401 bi-weekly (2 Times Per Month) 2 na na na 580-222-0400 blackwell Va Clinic 1009 West Ferguson Avenue blackwell, Ok 74631 monthly 2 na na na 580-363-0052 clinton Va Outpatient Clinic 315 Gary Blvd clinton, Ok 73601 monthly 2 na na na 580-547-0900 enid Va Clinic 915 East Owen K. Garriott Rd enid, Ok 73701 monthly 2 na na na 877-576-8291 fourteenth Street Va Clinic (vrc) 1301 Northeast 14th Street oklahoma City, Ok 73117 monthly 2 na na na 405-426-6839 friendship House Va 1140 Northwest 32nd Street oklahoma City, Ok 73118 monthly 2 na na na 405-456-1000 lawton North Clinic 2640 Miner Road fort Sill Ok 73503 monthly 2 na na na 580-585-5600 lawton Outpatient Clinic (fort Sill) 4303 Pitman St. lawton, Ok 73503 weekly 5 na na na 580-585-5600 norman Outpatient Clinic 1020 Nw 24th norman Ok 73069 monthly 3 na na na 405-217-6000 south Annex Clinic 7919 Mid America Blvd oklahoma City, Ok 73135 bi-weekly (2 Times Per Month) 4 na na na 405-855-6000 north May Clinic 2915 Pine Ridge Road oklahoma City, Ok 73120 monthly 4 na na na 405-752-6500 north Oklahoma City Clinic 14400 Bogert Parkway, suite 100 oklahoma City, Ok 73134 monthly 2 na na na 405-302-1500 shawnee Clinic 3700 N. Kickapoo Ave suite 100 & 108 shawnee, Ok 74804 monthly 2 na na na 405-214-1700 stillwater Va Outpatient Clinic 320 N Perkin Ave stillwater, Ok 74074 monthly 3 na na na 405-707-8100 tinker Air Force Base Clinic 72nd Medical Group (building 1094) 7050 Air Depot Blvd tinker Afb, Ok 73145 monthly 1 na na na 405-582-6485 wichita Falls Va Outpatient Clinic 2600 Central Freeway wichita Falls, Tx 76306 monthly 7 na na na 940-257-0001 salt Lake City, Utah Vamc 500 S Foothill Drive. Salt Lake City, Utah 84148 Building #1 bi-weekly 35 na na na kenyon Eastin 385-214-6024 robert Gilley 385-214-6024 eddie Nunn 385-214-6024 salt Lake City, Utah Vamc 500 S Foothill Drive. Salt Lake City, Utah 84148 Building #2 weekly 6 na na na kenyon Eastin 385-214-6024 salt Lake City, Utah Vamc 500 S Foothill Drive. Salt Lake City, Utah 84148 Building #7 weekly n/a trace Chemotherapy And Pathological 4 na robert Gilley 385-214-6024 salt Lake City, Utah Vamc 500 S Foothill Drive. Salt Lake City, Utah 84148 Building #14 weekly n/a trace Chemo, Non-hazardous Pharmaceutical, And Pathological chemo 10 pharma-4 pathological-friday-2 na eddie Nunn 385-214-6024 elko, Nevada Elko Pctoc Gateway Center 2719 Argent Avenue #9 Elko, Nevada 89801 quantity One 3 Gallon Mail Back Every 6 Weeks. quantity One 9 Gallon Sharp Every 3 Months Or As Needed. na na na 775-738-0188 janet Peck 775-934-1057 price, Utah Price Pctoc 600 West 189 South Ste. #b Price, Utah 84501 monthly Or As Needed. 1 na na na 435-613-0342 st.george, Utah Cboc 230 North 1680 East,bldg. N St. George, Utah 84790 monthly 2 non-hazardous Pharmaceuticals 1 na 435-634-7608 south Jordan, Utah Cboc 5119 W Daybreak Pkwy, South Jordan, Ut 84009 monthly 3 na na na 801-417-5734 idaho Falls, Idaho 640 South Woodruff Idaho Falls, Id 83401 monthly 1 na na na 208-522-2922 pocatello, Idaho Cboc 500 S 11th Ave Pocatello, Idaho 83201 monthly 1 na na na 208-232-6214 ogden, Utah Cboc 3945 South Washington Blvd.,suite A South Ogden, Utah 84403 monthly 5 chemo 1 na 801-479-4105 orem, Utah Cboc 774 South State Street Orem, Ut 84058 monthly 3 na na na 801-235-0953 cache Valley, Logan Utah Cboc 2380 North 400 East, Suite G North Logan Utah 84341 monthly 1 na na na 801-582-1565 rocky Mountain Regional Va Medical Center 1700 N. Wheeling Street aurora, Co., 80045 daily 40 trace Chemo, Non-hazardous Pharmaceutical, And Pathological (weekly) 8 10 9 na jason R. Lelm 720-723-6398 aurora Clinic 13701 E. Mississippi aurora Co., 80012 monthly 2 na na na jason R. Lelm 720-723-6398 domiciliary Lakewood Clinic 7350 W. Eastman Place lakewood, Co., 80227 weekly 2 na na na jason R. Lelm 720-723-6398 pueblo Nursing Home 2600 Oakshire Lane pueblo, Co., 81001 weekly 2 na na na jason R. Lelm 720-723-6398 pueblo Outpatient Clinic 4776 Eagleridge Circle pueblo, Co., 81008 weekly 3 non-hazardous Pharmaceutical semi-annual - 1 jason R. Lelm 720-723-6398 la Junta Clinic 1100 Carson Ave, Suite 104 la Junta, Co., 81050 bi-monthly (eom) 1 na na na jason R. Lelm 720-723-6398 alamosa Primary Care Clinic 622 Del Sol Drive alamosa, Co., 81101 bi-monthly (eom) 1 na na na jason R. Lelm 720-723-6398 salida Outpatient Clinic 1000 Rush Drive salida, Co., 81201 monthly 1 na na na jason R. Lelm 720-723-6398 jewell Outpatient Clinic 14400 Jewell Avenue aurora, Co., 80012 monthly 1 na na na jason R. Lelm 720-723-6398 burlington Outpatient Clinic 1177 Rose Avenue burlington, Colorado, 80807 monthly 1 na na na jason R. Lelm 720-723-6398 pfc Floyd K. Lindstrom Outpatient Clinic At Colorado Springs 3141 Centennial Boulevard colorado Springs, Co 80907 bi-monthly (eom) 3 non-hazardous Pharmaceutical every Three Months - 1 jason R. Lelm 720-723-6398 golden Outpatient Clinic 1020 Johnson Rd. golden, Co., 80401 bi-monthly (eom) 3 na na na jason R. Lelm 720-723-6398 lamar Outpatient Clinic 1401 South Main Street, Suite 2 lamar, Colorado, 81052 bi-monthly (eom) 2 na na na jason R. Lelm 720-723-6398 community Resource And Referral Center 3836 York Street denver, Colorado, 80205 weekly 1 na na na jason R. Lelm 720-723-6398 union Boulevard Outpatient Clinic 3920 N Union Blvd suite 100 colorado Springs, Co 80907 monthly 2 na na na jason R. Lelm 720-723-6398 union Boulevard Outpatient Clinic 3920 N Union Blvd suite 200 colorado Springs, Co 80907 monthly 2 na na na jason R. Lelm 720-723-6398 space Center Outpatient Clinic 565 Space Center Drive suite 130 colorado Springs, Co 80915 monthly 2 na na na jason R. Lelm 720-723-6398 butte Va Clinic 40 Three Bears Dr. Butte, Mt 59701 monthly 2 non-hazardous Pharmaceuticals 1 na (406) 496-3000 billings Health Care Center 1766 Majestic Lane billings, Mt 59102 weekly 2 non-hazardous Pharmaceuticals 1 na (406) 373-3500 bozeman Cboc 1101 East Main Street, Suite 201 bozeman, Mt 59715 bi-monthly (eom) 1 non-hazardous Pharmaceuticals 1 na crystal Gaddo (406) 582-5337 cut Bank Cboc 8 Second Avenue Southeast cut Bank, Mt 59427 bimonthly (eom) 1 non-hazardous Pharmaceuticals 1 na pamela Kleh (406) 758-2712 Or Wanda Mckay (406) 873-9047 fort Harrison Va Medical Center 3687 Veterans Drive, Po Box 1500 fort Harrison, Mt 59636 monthly 9 trace Chemotherapy, pathological 8 1 na (406) 447-7852 eugene Scott Winters glasgow Va Clinic 630 2nd Avenue South, Suite A glasgow, Mt 59230 monthly 1 non-hazardous Pharmaceuticals 1 na nancy Lasar (406) 535-4790 great Falls Va Clinic 1400 29th Street South, Suite 1 great Falls, Mt 59405 monthly 3 non-hazardous Pharmaceuticals 1 na marcie Watson (406) 791-3245 hamilton Va Clinic 299 Fairgrounds Road, Suite A hamilton, Mt 59840 bi-monthly (eom) 1 non-hazardous Pharmaceuticals 1 na (406) 363-3352 havre Cboc 1753 Us Highway 2 Northwest, Suite 3 havre, Mt 59501 monthly 1 non-hazardous Pharmaceuticals 1 na teri Matosich (406) 265-4304 kalispell Va Clinic 31 Three Mile Drive kalispell, Mt 59901 bi-weekly (eow) 2 non-hazardous Pharmaceuticals 1 na pamela Kleh (406) 758-2712 Or Carolyn Baker lewistown Va Clinic 629 Northeast Main Street, Suite 1 lewistown, Mt 59457 monthly 1 non-hazardous Pharmaceuticals 1 na janna Vandenbos (406) 535-4790 miles City Clc 210 South Winchester Avenue miles City, Mt 59301 monthly 1 non-hazardous Pharmaceuticals 1 na clc: (406) 874-5600 clinic: (406) 442-6410 miles City Cboc 316 South Haynes Avenue miles City, Mt 59301 quarterly 1 non-hazardous Pharmaceuticals 1 na clinic: (406) 874-5680 tracy Holman / Mark Malloy 5666 missoula Va Clinic 3885 West Broadway Street missoula, Mt 59808 weekly 2 non-hazardous Pharmaceuticals 1 na virginia Mahn (406)493-3793 kristina Frost (406) 493-3700 jack C Montgomery Vamc, 1011 Honor Heights Dr. Muskogee Ok 74401 2x Weekly 12 trace Chemotherapy, Non-hazardous Pharmaceutical, And Pathological 12 na john Barbee/weston Phillips 918-577-3258 ernest Childers Va Hcc, 8921 S. Mingo Dr. Tulsa Ok 74133 monthly 20 trace Chemotherapy, Non-hazardous Pharmaceutical, And Pathological 3 na shawna Ziegler 918-348-1452 claremore, Cboc. 3000 Medical Parkway claremore, Ok 74017 2 X Monthly 4 trace Chemotherapy, Non-hazardous Pharmaceutical, And Pathological 4 na leon Langguth 918-348-9608 bartlesville Cboc. 3005 E Frank Philips Boulevard bartlesville, Ok 74006 918-348-0307 2 X Monthly 4 trace Chemotherapy, Non-hazardous Pharmaceutical, And Pathological 4 na tiawna Spiller, 918-348-0307 cheyenne Va Mc 2360 E Pershing Blvd Cheyenne Wy 82001 weekly 35 trace Chemotherapy, Non-hazardous Pharmaceutical And Pathological 2 na austin John (307)7787550 X3914 fort Collins 2509 Research Boulevard, Fort Collins weekly 2 trace Chemotherapy 2 na austin John (307)7787550 X3914 loveland Va Clinic 5200 Hahns Peak Drive loveland, Co 80538-8852 weekly 2 trace Chemotherapy 2 na austin John (307)7787550 X3914 northern Colorado Va Outpatient Clinic 4575 Byrd Dr. loveland, Co 80538 weekly 5 trace Chemo, Non-hazardous Pharmaceutical, And/or Pathological 4 na administrative Officerâ  (970).962.4900 X2111â â â â â â â â â â â â â â â â â â â â â â â  Administrative Support Assistant Phone 970-593-3300 Ext 2888 mobile - 4434690130 sidney Va Clinic 1116 10th Avenue, Sidney Ne 69162 monthly 1 na na na austin John (307)7787550 X3914 rawlins Va Clinic 1809 East Daley Street rawlins, Wy 82301 quarterly mail Back box na na na austin John (307)7787550 X3914 vamc Grand Junction Co. 2121 North Ave grand Junction Co bi-monthly 10 chemo, Non-hazardous Pharmaceuticals, And Pathological 10 na jt Quinn (970) 242-0731 X 2749 (alt) Med Recibe 970-242-0731 X2559 montrose Cboc 154 Colorado Ave. Co 81401 monthly 0 non-hazardous Pharmaceuticals 2 na jt Quinn 970-242-0731 X2749 (alt)melissa Szakmeister (970) 249-7791 glenwood Springs Cboc 2425 S. Grand Ave. Unit 101 Glenwood Springs Co 81601 quarterly 0 non-hazardous Pharmaceuticals 2 na jt Quinn 970-242-0731 X2749 (alt) David Brodd (970) 945-1007 craig Cboc centennial Mall, Ste 116, 1111, W Victory Way Craig Co 81625 quarterly 0 non-hazardous Pharmaceuticals 2 na jt Quinn 970-242-0731 X2749 (alt) Tonya Louchan (970) 824-6721 moab Cboc 702 South Main Street, Suite 5b moab, Ut 84532 quarterly mail Back Box na na na jt Quinn 970-242-0731 X2749 (alt) Tonya Louchan (970) 824-6721 2.5. Contingency Plan: fort Harrison Va Medical Center And Glendive Cboc Will Utilize This Contract As Their Contingency Plan For Temporary Closures Of Their Autoclave. the Entire Visn 19 Healthcare Systems Will Utilize This Contract In The Rare Event That A Category A Infectious Waste Is Generated. 3.0. Contractor Requirements And Qualifications 3.1. The Contractor Shall: provide And Maintain All Licenses And Permits For Operational Personnel, Trailers, Containers, Vehicles And Other Resources Required For Proper Removal Of Biohazardous Waste In Accordance With All Applicable Federal, State, Municipal, And Local Regulations (e.g. Osha, Epa, Mt/wy/ut/ok Deq, Co Dphe, 49 Cfr (dot) Including, But Not Limited To Hm-18). the Contractor Shall Provide The Services Enumerated Above At The Rates Set Forth Which Includes All Applicable Taxes, Assessments, And Related Charges, Including Adjustments For It. The Contractor Shall Provide All The Necessary Equipment To Perform Such Services And All Such Equipment Shall Comply With All Applicable Federal, State, County, And Municipal Laws, Regulations, Guidelines And Permits. the Contractor Shall Provide A Variety Of Overpack Containers Sizes With Liners. All Containers And Liners Will Be Labeled According To All Federal, State And Local Regulations. Any Changes To Type, Size, Amount Of Equipment, And The Frequency Of Service May Be Mutually Agreed To In Writing By Both Parties Without Affecting The Validity Of The Contract. supply All Overpack Containers For Transport Of The Above Waste And Perform All Labeling, Manifesting, Labor, Transportation, Proper Disposal And Certificate Of Destruction For Each Pick Up Of Waste In Accordance With All Federal, State And Local Requirements. contain Any Spills Which Occur While The Medical Waste Is Being Handled, Removed, Or Transported By The Contractor. Any Clean-up Shall Be The Responsibility Of The Contractor. immediately Notify All Appropriate Authority Having Jurisdiction (ahj) And The Contracting Officer S Representative (cor) Should A Vehicle Be Involved In A Spill Or Accident That Renders The Vehicle Non-compliant With Applicable Rules And Regulations. ensure All Spillage Or Leaks Are Promptly Cleaned-up Along Any Transportation Route If Such Spillage Or Leaks Are From The Contractor S Hauling Equipment And/or Vehicles. not Allow Any Rmw To Be Compacted Before Being Sterilized. ensure All Waste Overpack Containers Are Cleaned And Disinfected For Use When Delivered To The Facility. ensure All Waste Containers Are Rigid And Puncture Resistant And Labeled With The Word Biohazard . ensure All Chemotherapy Waste, Non-hazardous Pharmaceuticals, And Pathological Are Picked Up During Rmw Pickups And Are Incinerated In A Permitted Treatment Facility. equip Transportation Vehicles With Fully Enclosed Leak-resistant Cargo Body Maintained In Sanitary Condition And Secured When Left Unattended. Vehicles Shall Be Properly Disinfected As A Result Of Leaks Or Spills. ensure Rmw Is Not Combined With Other Waste. ensure Transporter Sign, Date, And Furnish A Copy Of The Manifest Prior To The Rmw Leaving The Pickup Site. Certify That The Manifest Data Matches The Load To Be Removed. Deliver The Waste To An Authorized Facility And Sign The Manifest To Verify That The Regulated Material Has Been Delivered. Return All Remaining Copies Of The Manifest To The Generator, Assuring Final Disposal. supply Up To Twenty-five (25) 96-gallon Internal Transport Containers Per Main Hospital Waste As Outlined In Schedule Section. provide A Monthly Summary Report Of All Rmw Disposed To The Vamc Cor Within 14 Days Of The Final Pick-up In That Calendar Month. Report Shall List Each Waste Stream; Regulated Medical, Trace Chemotherapy, Non-hazardous Pharmaceuticals, And Pathological, With Location Totals. the Contractor Shall Lead A Quarterly Program Meeting With The Co And The Cor S To Address Contract Performance. These Meetings May Take Place Virtually With All Stations In Attendance. Should Contract Deficiencies Arise, Meetings May Be Held On A More Frequent Basis To Resolve Any/all Issues. The Contractor Shall Provide Draft Meeting Minutes To The Cor For Review Within Seven (7) Calendar Days Of The Meeting And Final Minutes Within Seven (7) Calendar Days Of The Cor S Draft Review. The Minutes Will Accurately Document Meeting Participants And The Discussions And Decisions That Took Place During The Meeting. contractor Shall Notify Cor 24 Hours In Advance If Picking Up On An Out Of Cycle Day To Ensure Staffing To Sign Manifest. contractor Shall Provide Waste Reduction Opportunities To Vahcs Based On Sites Waste Trends Or Industry Standards. 3.2. Education And Training Requirements. due To The Health And Safety Risks (especially Bloodborne Pathogens) Associated With This Requirement, The Contractor S Methods, Procedures, Training And Other Controls That Are Proposed Must Allow The Performance Of The Tasks With No Adverse Effects From The Risk Factors. the Contractor Shall Provide Training To The Employees Within The Visn For Proper Packaging Of Waste Prior To The Startup Of The Contract Collection Per Contracts Rules And Processes And Dot Shipping Requirements. the Contractor Reserves The Right To Decline To Accept For Collection, Transportation, Treatment Of Disposal Of Any Rmws With Cannot Be Transported, Treated Or Disposed Of In A Lawful Manner Or Without A Risk Of Harm To Public Health Or The Environment. improperly Packaged, Leaking, Overweight Or Damaged Containers Are Subject To Rejection. No Containers Will Be Picked Up That Are Wet Or Leaking. Repackaging Of The Waste By The Contractor Shall Be Reimbursable When Prior Approval Of The Va Representative Is Acquired. contract Personnel Shall Be Trained In The Proper Dot, Epa, And Mt/wy/ut/ok Deq Or Co Dphe Handling Requirements. The Training Plan Shall Demonstrate A Good Working Knowledge Of The Us Dot, Us Occupational Health And Safety (osha), And Other Applicable Regulations That Govern The Health And Safety Risks Involved In The Handling And Shipping Of Regulated Medical Waste. The Contractor Must Be Able To Provide, At A Minimum, The Following Training: - Us Dot - Hazmat Familiarization - Function Specific - Shipping Papers - Proper Packaging - Safety - Security Awareness/in-depth Security - Osha Bloodborne Pathogens Standard - Waste Minimization 3.3. Conduct: the Contracting Officer Reserves The Right To Request The Contractor To Provide Another Employee If An Employee Does Not Obey Vamc Policies, Vha Directives, Or Does Not Act In The Best Interest Of The Government. all Contract Personnel Shall Be Instructed That Smoking, Chew Tobacco, And Vaping Is Prohibited On Va Property. 3.4. Employer Responsibility: the Contractor Shall Be Responsible For Protecting The Personnel That Are Furnishing The Services Under This Contract. To Carry Out This Responsibility, The Contractor Shall Provide The Following For Their Personnel: worker S Compensation professional Liability Insurance income Tax Withholding social Security Payments contractor S Personnel May Be Required To Perform Work Under Potentially Hazardous Conditions. Contractor S Personnel Shall Be Informed Of Potentially Hazardous Situations By Contractor, Trained By Contractor In Techniques Required To Recognize And Deal With Potentially Hazardous Situations In A Manner Which Will Minimize Personal Risk, And Required To Adhere To Standard Techniques For Personal Protection. 3.5. Uniforms And Employee Identification: All Of The Contractor S Personnel Assigned To The Performance Of This Contract Shall Wear A Uniform That Is Clearly Distinguishable From All Va Uniforms And Name Badge To Clearly Identify Company Name And Employee Name. contractor Employees Will Not Be Considered Or Treated As Federal Employees For Any Purpose, Will Not Be Regarded As Performing A Personal Service, And Will Not Be Eligible For Civil Service Employee Benefits, Including Retirement. contractor Employees Shall Identify Themselves As Contractor Employees In All Communication Modes Used In Performing The Services, E.g. Email, Telephone, Verbal. Services Furnished By Contractor Employees Will Be Performed As Necessary To Fulfill The Requirements Of This Pws. 3.6. Invoicing all Invoices From The Contractor Shall Be Submitted Electronically In Accordance With Vaar Clause 852.232-72 Electronic Submission Of Payment Requests. submittals Shall Be Done Monthly. payment Will Be Made Upon Receipt Of A Properly Prepared, Itemized Invoice, Validated By The Cor, And Submitted Through The Tungstun System. a Properly Prepared Invoice Will Contain: invoice Number And Date contractor S Name And Address accurate Purchase Order Number itemization Of Pounds Recycled And Disposed price Per Pound dates Service Performed location Of Service Performed total Amount Due a Separate Invoice Will Be Prepared For Each Facility 4.0 Safe Handeling Of Medical Waste 4.1 General Safety Provisions contractor Shall Provide All Safety Equipment For Their Employees In The Performance Of This Contract While On Government Property And Shall Abide By Safe Working Standards. in The Performance Of This Contract, The Contractor Shall Take Such Safety Precautions As Necessary To Protect The Lives And Health Of Occupants Of The Building. the Contractor Shall Immediately Correct Any Fire And Safety Deficiencies Caused By His/her Employee. If The Contractor Fails Or Refused To Correct Deficiencies Promptly, The Contractor Officer May Issue An Order Stopping All Or Any Part Of The Work And Hold The Contractor In Default Of The Contract. the Contractor Shall Comply With Applicable Federal, State And Local Safety And Fire Regulations And Codes That Are In Effect At The Beginning Of The Contract Period. The Contractor Shall Keep Abreast Of, And Comply With, Changes In These Regulations And Codes Applicable To The Contract. the Contractor Is To Provide Copies Of All Safety Data Sheet (sds) To The Cor If Chemical Products Used By The Contractor Are Brought On Site. 4.2. Spill Handling the Contractor Shall Report All Spills To The Facility S On-site Poc And To The Cor. The Contractor Shall Be Legally And Financially Responsible For The Cost Of All Clean-up Of Spills Created By The Contractor. The Contractor Shall Be Required To Clean-up Any Spills Created During The Collection Process Utilizing Non-va Resources. 4.3. Recordkeeping in The Performance Of All Services To Be Provided Hereunder, The Contractor Agrees To Comply With All Applicable Permits, All Applicable Federal, State, County, And Municipal Laws And Ordinances And All Lawful Orders, Rules, Regulations And Guidelines Of Any Duly Constituted Authority, Including But Not Limited To Social Security, Income Tax Withholding Laws, Unemployment Compensation Laws, Environment, Safety And Health Laws And Manifesting Requirements. the Contractor And Its Affiliates Shall Keep And Retain Adequate Books And Records And Other Documentation Including Personnel Records, Correspondence, Instructions, Plans, Receipts, Vouchers, Copies Of All Manifests And Any Other Records Or Repots Or Memoranda, Consistent With And For The Period Required By Applicable Regulatory Requirements And Guidelines Pertaining To Performance Of The Services. contractor Shall Provide An Electronic Manifest Database As A Redundancy For All Stations To Access. 5.0. Contract Performance Monitoring monitoring Of Contractor S Performance Shall Be Demonstrated Through Direct Observation. The Cor And/or The Alternate Cor Shall Be The Va Official Responsible For Verifying Contract Compliance. After Contract Award, Any Incidents Of Contractor Noncompliance As Evidenced By The Monitoring Procedures Shall Be Forwarded Immediately To The Contracting Officer. 5.1. Contractor Monitoring By Service: at The Time Of Contract Award, The Contracting Officer Will Appoint A Cor And The Alternate Cor To Assist With The Contract Monitoring Requirements. The Cor (and Alternate Cor If Appointed) Will Monitor Such Items As Quality Of Service, Timeliness Of Performance, Customer Service, Cost Control, And Business Relations. The Cor Will Ensure That Services Are Performed And Be Responsible For Handling Service-related Requirements Necessary For Patient Care, The Mission Of Vha. the Services Provided Will Be Monitored Through A Variety Of Mechanisms, Including But Not Limited To: observation random Inspection Of Services Provided the Government May Evaluate The Quality Of Professional And Administrative Services Provided; But Retains No Control Over The Medical, Professional Aspects Of Services Rendered (e.g., Professional Judgments, Diagnosis For Inspections And/or Testing Methods), In Accordance With Far 37.401(b). the Delegated Cor (and/or Alternate Cor) Will Notify The Contracting Officer Of Any Non-compliance Immediately Upon His/her Gaining Knowledge Of Any Such Situation Or Incident. Initial Communication May Be Communicated By Telephone. After Such Communication, The Cor (and/or Alternate Cor) Will Provide A Written/electronic Statement To The Contracting Officer Along With Any Supporting Documentation Regarding The Performance Failure Noted. a Summary Evaluation Of The Contractor Performance Will Be Forwarded To The Contracting Officer Annually Prior To Exercising Any Option Year(s) And Could Affect Positive Cpars (contract Performance Assessment Reporting System) Or Other Past Performance Ratings. 6.0. Price/cost Schedule the Contractor Shall Provide Labor, Transportation, Collection, Removal, Treatment And Destruction For The Disposal Of All Rmw Generated By Visn 19 Health Care Systems (hcs), Cbocs, Hhcs, Clcs And Primary Care Tele-outreach Clinics (pctocs) As Specified In This Pws Cost/price Schedule In Accordance With The Terms And Conditions Of This Contract And Provide For A Reusable Sharps Container Program. Performance Will Be According To The Requirements Contained In This Pws. this Order Will Be Under A Firm Fixed Price (ffp) Agreement With Estimated Quantities. The Government Reserves The Right To Award One Or More Contracts Resulting From This Solicitation. The Award Will Be For One Base Year And Four (4) Option Years. 7.0 Additional Evaluation Factors the Contractor Shall Be Properly Licensed By Federal, State And Local Authorities, To Provide Pickup, Removal And Disposal Of Each Type Of Waste As Described Within Each Line Item. the Contractor Shall Provide (with Their Quote) A Copy Of Their Emergency Spill Response Plan, Their Remediation Plan, And A Copy Of All Licenses And Permits Indicated In This Performance Work Statement (pws) Or A Statement Stating All Licenses/permits Can And Will Be Obtained Upon Award Of Contract. the Contractor Must Submit At The Time Of Offer The Company Name, Address, Contact Person, And Phone Number Of All Disposal Facilities (primary And Alternate) To Be Used Under This Contract. contractor Shall Ensure That At The Time Of Submission Of Quote Their Primary And Alternate Disposal Facility Is Not Listed As A High Priority Violator (hpv). The Contractor Must Obtain Va Approval Of All Disposal Facilities And/or Methods Of Disposal Before First Pick-up. If Disposal Facility Should Change For Any Reason Contractor Shall Request And Receive Approval (e-mail) Before Pick-up Or Disposal. contract Shall Ensure Disposal Method(s) Are In Compliance With All Hipaa Regulations. contractor Shall Employee Enough Drivers To Ensure Pickup Coverage For Entire P

Details: Request For Information Mobile X-ray And Ultrasound Imaging For Clinics this Is A Request For Information. This Is Not A Solicitation For Proposals, Proposal Abstracts, Or Quotations. The Purpose Of This Notice Is To Obtain Information Regarding The Availability And Capability Of All Qualified Sources To Perform A Potential Requirement. services Required: The Department Of Veterans Affairs (va), Veterans Health Administration (vha) Mt. Home Vamc And Surrounding Area Clinics Have A Need For Mobile X-ray And Ultrasound Imaging. purpose And Objectives: Your Responses To The Information Requested Will Assist The Government In Determining The Appropriate Acquisition Method. projected Naics Code: 621512 And Sized Standard Is $19.0 Million. note: Respondent Claiming Sdvosb And Vosb Status Must Be Registered And Verified In Sba Vetcert. Additionally, All Offerors Responding To A Solicitation Must Have An Active Registration In The System For Award Management (sam) At The Time Of Quote Submission. anticipated Period Of Performance: Services Are Needed October 1, 2024. rfi Questionnaire company Name ___________________________________________ poc ___________________________________________ phone Number ___________________________________________ email Address ___________________________________________ uei ___________________________________________ 1. Is Your Firm Considered A Small Business? The North American Industry Classification System (naics) Code Is Tentatively 621512; The Small Business Size Standard For This Naics Code Is $19.0 Million. a Size Standard, Which Is Usually Stated In Number Of Employees Or Average Annual Receipts, Represents The Largest Size That A Business (including Its Subsidiaries And Affiliates) May Be To Remain Classified As A Small Business For Small Business Administration And Federal Contracting Programs. The Definition Of "small" Varies By Industry. Is Your Business Considered Any Of The Following? [ ] Yes [ ] No Service Disabled Veteran Owned Small Business (sdvosb)** [ ] Yes [ ] No Veteran Owned Small Business (vosb)** [ ] Yes [ ] No Historic Underutilized Business Zone (hubzone) [ ] Yes [ ] No Small Disadvantaged Business (sdb) [ ] Yes [ ] No Woman Owned Small Business (wosb) [ ] Yes [ ] No Small Business (sb) if You Are A Small Business, Are You Able To Comply With Far 52.219-14 Limitations On Subcontracting? [ ] Yes [ ] No 2. Does Your Firm Have An Active Registration In The System For Award Management (sam)? [ ] Yes [ ] No 3. Have You Provided Mobile X-ray And Ultrasound Imaging To A Federal Agency In The Past? If So, Please List Experience. 4. Do You Have X-ray And Ultrasound Technicians Who Are Available To Provide These Services? Please Provide Details, To Include How Many Available Providers, Their Location, Etc. 5. What Type And Size Of Vehicle Will Be Required To Provide This Mobile Service? 6. How Long Would It Take To Procure And/or Assemble The Necessary Equipment Needed To Meet This Requirement After Award? 7. Provide Any Additional Feedback That You Feel Is Relevant (i.e., Problems Or Any Other Issues Experienced With Similar Contracts). note: Do Not Include Proprietary, Classified, Confidential, Or Sensitive Information In Responses. please E-mail Your Questionnaire Response With The Above Information To Christina Curley (christina.curley@va.gov) With The Subject Line "request For Information: Mobile X-ray And Ultrasound Imaging For Clinics By 10:00am Ct On May 20, 2024. disclaimer And Important Notes. This Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. The Government Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. Any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization S Qualifications To Perform The Work. Respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. After A Review Of The Responses Received, A Pre-solicitation Synopsis And Solicitation May Be Published To The System For Award Management. However, Responses To This Notice Will Not Be Considered Adequate Responses To A Solicitation. general Information contract Opportunity Type:â sources Sought (original) all Dates/times Are:â (utc-10:00) Central Time, Chicago, Usa original Published Date:â april 24, 2024 original Response Date:â may 20,2024; 10:00 Am Ct agency: Department Of Veterans Affairs (va), Network Contracting Office 9 (nco 9) For The James H. Quillen Vamc (jhqvamc) classification original Set Aside: Unrestricted product Service Code:â q522 Medical Diagnostic Imaging naics Code: 621512 And Size Standard $19.0 Million place Of Performance: Mt. Home Vamc And Surrounding Area Clinics description this Request For Information (rfi) / Sources Sought (ss) Notice Is For Market Research, Information, And Planning Purposes Only And Shall Not Be Construed As A Solicitation Or As An Obligation On The Part Of Va Or The James H. Quillen Va Medical Center. This Is Not A Solicitation For Proposals, Proposal Abstracts Or Quotations. The Purpose Is To Obtain Information Regarding The Availability And Capability Of All Qualified Sources To Perform A Potential Requirement. this Is A New Requirement For Mobile X-ray And Ultrasound Services. Services Are To Be Provided To 10 Rural Community Based Outpatient Clinics (cbocs) In The Mountain Home Va Catchment Area. The Contractor Shall Provide All Resources And Equipment Necessary To Provide These Services. a Two-week Period Is Being Given To Respond To Potential Contractor Questions. If You Are Interested And Have Questions, Please Submit Your Questions Via E-mail To Christina.curley@va.gov By 10:00 Am On May 9, 2024. Questions Will Be Answered Via An Amendment To This Sources Sought Notice. performance Work Statement general Information introduction And Overview visn 9, Mountain Home Vamc, Requires Contractual Services To Provide Mobile Imaging Services Onsite At The Corner Of Sydney And Lamont St., Mountain Home, Tennessee And/or Downtown West Outpatient Center, Knoxville, Tn And/or Mountain Home Affiliate Community Based Outpatient Clinic (cboc). See Attachment A For List Of All Potential Areas Of Service. Mobile Imaging Services Includes A Primary Non-18 Wheeled Trailer/coach Containing Radiographic X-ray And Ultrasound Unit With Option For The Secondary To Be 18 Wheeled If Shortest Unit Available Close To Length As Non-18 Wheeled Vehicle In Order To Service Smaller Cboc Locations. Vehicle Platform For This Contract Is To Utilize A Mobile Platform That Is The Smallest Possible To Ensure Reliability And Travel In Winter Weather Conditions. The Targeted Platforms Include Sprinter And Box. Mobile Vehicle Will Transport Equipment And Personnel To Multiple Locations On A Rotating Schedule. Radiographic X-ray Equipment Will Be Diagnostic X-ray Unit To Include Chest Board, Table Bucky, Overhead Railing, X-ray Generator And All Other Equipment To Be Fully Operational. Ultrasound Unit Will Be Full Diagnostic System To Perform All Ultrasound Exams On All Body Habitus. Ultrasound Unit Will Have The Ability To Acquire Images Within The Coach And/or Transported Into A Government Provided Space To Perform Ultrasound Examinations. All Acquired Images Will Be Transmitted In Real-time Electronically With Contractor Supplied Solution. Government Will Have Option To Operate With Government Qualified Technologists Or Government May Request Contractor To Supply Qualified Technologist Staffing. The Contractor Shall Provide All Labor, Materials, Equipment, Maintenance, And Repair Of All Contractor-furnished Equipment (including The Mobile Vehicle Unit). Contractor Shall Be Responsible To Always Maintain All The Equipment In Good Working Order And Shall Reimburse The Vamc For Lost Time, Which May Result From Defective Workmanship Or Equipment Failure. Services Shall Be Performed As Listed In The Schedule Of Pricing. contractor Responsibilities Summary But To Include All Items Within This Contract And Requirements To Be Fully Operational As A Vehicle And As Imaging Units. contractor Shall Provide All Personnel, Transportation, And Equipment. services Shall Be Performed By Certified Technologists contractor Shall Provide A Mobile Service Solution That Shall Include A State-of-the-art Fixed X-ray Unit In A Suitable Automobile. shall Provide State-of-the-art Ultrasound Unit That Shall Be Transported (properly Secured_ In The Same Automobile Unit). Once On Site, The Ultrasound Unit Shall Be Transported Inside Government Facility. contractor Shall Provide One Tech Each For Ultrasound And X-ray In Addition To A Driver. Driver Is At The Discretion Of The Contractor. This Driver Position Is Not A Mandate And Depends On The Cdl Rating Of The Coach Vehicle As The Technologists May Be Able To Drive Based On Size. all Patients Scheduled And/or Added On Will Be Scanned By The Contractor Staff And/or Government Staff With All Digital Images Transferred To Va Picture Archiving Communication System (pacs). Technologist Will Verify Image Transfer On All Exams And Complete All Requirement Work To Bring Exam To Completion. supplies contractor Shall Solely Be Responsible For The Procurement, Receipt, Dispensing, Administration And Safekeeping Of All Supplies Defined Herein. These Supplies Include Items For Maintaining Equipment, Patient Positioning, Computer Systems, And Any Other Items Required To Operate Equipment And Perform Exams. term Of The Contract the Resulting Contract Shall Be Effective For A Base Period Of One Year From Date Of Award Plus Nine (9) One-year Option Periods, Renewable At The Government S Discretion. This Contract Is Subject To The Availability Of Vamc Funds; No Service Shall Be Performed After End Of Contract Term, Unless Authorized By The Administrative Contracting Officer. contractor S Furnished Equipment equipment Shall Include, But Not Be Limited To, A Contractor-furnished, Fully Equipped, Non-18 Wheeled Vehicle/coach, Housing A Fully Diagnostic X-ray Unit With Table And Upright Chest Board, Not A Portable X-ray Unit, And A Fully Diagnostic Ultrasound, Non-laptop, Unit That Can Be Wheeled Into On-site Location. Mobile X-ray Imaging Services Will Be Performed On A Mobile Unit That Meets Facility Approval (documentation Of Proposed Units To Be Provided With Bid). Ultrasound Imaging Unit Must Meet Facility Approval. Equipment Specifications Will Include Year, Manufacturer, Model Number, And Make Of All Pertinent Information. All Equipment Used Will Be Fda Approved Imaging Equipment. The Entire Offering Of A Mobile Radiology Services Shall Meet All Local, State, Federal, Industry, Jcaho, Nec, Nfpa, Va, Osha And Other Regulatory Standards Internal And External For Which The Vamc Is Currently Accountable And Will Be Kept Current With All Federal And State Regulations. system Capability Requirements contractor Shall Provide An On-site Mobile Ultrasound And X-ray Unit That Is A Full System In Accordance With The Terms And Conditions Of This Contract. The Unit Shall Have The Ability To Perform All General X-rays And Ultrasound Exams. mobile Unit Capabilities And Requirements the Mobile Unit Must Have The Following: hardware And Software To Support Fully Diagnostic Uncompressed Images To Include Compatible Post Processing Advanced Imaging. fips 140-2 Compliant On All Systems Directly Interfacing With Government Network. ability To Create, Store And Export Dicom, Jpeg And Mpeg File Formats. dicom 3.0 Network Capability For Export Of Images Within Vamc. Transport Of Images Will Be Va-supplied Network Infrastructure. the Mobile Unit Shall Be Equipped With A Cd-r Burner For A Backup To Transfer Data And To Burn Disc For Patients On Request. the Mobile Unit Shall Provide Sub Space Sufficient To Allow Patient To Undress/dress In Private. the Mobile Unit Shall Provide The Space Sufficient And The Appropriate Equipment For Performing Cpr, If Necessary. the Mobile Unit Will Require Network Connection For Government Furnished Computer To Be Utilized By Technologists To Complete All Government Requirements For Exam Completion. contractor Shall Provide Network Connection Solution For Transferring Of Images To Va Network That Meets All Security Requirements. Provide Solution/s And/or Options With Proposal For Bid. mobile Unit Accessories the Following Accessory Equipment Shall Be Provided By The Contractor: handicap Accessibility intercom System Between The Control Room And The Scanning Room the Mobile Unit Shall Provide All Equipment Compatible With Mobile Unit, E.g. Pads, Sponges, Patient Moving Accessories, Wheelchair, And Etc. equipment Specifications the Following Minimum Performance Characteristics Of The Equipment Are Required: the Imaging Equipment Shall Provide Images With Consistently High Technical Quality To Be Assessed By Va-employed Experts. Poor Image Quality Will Be Considered Non-performance Under This Contract And Must Be Remedied Within 10 Days Of Notification Or Incur Default. the Imaging Equipment Shall Be Capable Of Acquiring Images To Meet All Protocols To Include Dual Energy Chest. the Imaging Equipment Shall Be Capable Of Acquiring Images And All Post Processing Requirements To Deliver High Quality Diagnostic Images. contractor Shall Provide Generator For Self-contained Power To Fully Operate Entire Coach And All Equipment Within, Possibly For Extended Periods Of Time. the Ultrasound Unit Shall Have: all Ultrasound Transducers To Perform All Ultrasound Exams To Include All Body Habitus. the Mobile Imaging Unit Shall Be Ready For Use Regardless Of Outside Environmental Conditions, And Shall Adhere To The Following: the Mobile Unit Shall Maintain A Temperature To Assure Proper Operation Of Equipment Without Frequent Calibration And Provide For Patient Comfort. the Mobile Unit And Imaging Equipment Shall Meet All Federal, State, Fire And Safety Requirements. the Mobile Unit Shall Be Equipped With Outlet Jack S Connections Capable Of Transmitting Data And Voice Through Government-provided Category Five (5) And Dual Power Phone Cable. the Mobile Unit Shall Be Equipped With Secured Landline And Wireless Technology That Will Allow For Transmission Of Images. Contractor Shall Provide Full Solution Within Proposal. pedestal Power And Landline Network Will Not Be Provided By Government Due To Separate Existing Building Lease Contract Restraints. Contractor May Work Independently With Building Owner To Establish Pedestal Power And Landline At Contractor Expense. Please Note Each Location Is Unique Environment And All Have Different Building Owners. the Imaging Equipment Shall Support Dicom Modality Worklist (dmwl) For Future Use And Shall Be Able To Export Dicom Images To At Least One Destination. the Imaging Systems Must Be On The Vista Imaging Approved Dicom Modality Interface List. equipment Maintenance / Repairs equipment Provided Shall Be Always In Good Working Order In Order To Provide High Quality Scans Required Under This Contract. Contractor Shall Be Completely Responsible For The Preventive Maintenance, Emergency And General Repairs, Safety, Cleaning, And Upkeep Of All Equipment Furnished By The Contractor. Preventative Maintenance/repairs On The Mobile Unit And All Associated Equipment Shall Be Performed In Accordance With The Conformance Standards And Manufacturer S Recommendations. If The Equipment Should Fail During Normal Working Hours, Every Effort Should Be Taken In Order To Reduce Equipment Downtime By Expediting Repairs. exams Canceled Or Postponed Due To Failure Of Services Provided By The Contractor Must Be Rescheduled And Performed By The Contractor At The Original Imaging Site Within Seven (7) Calendar Days Of The Initial Appointment During The Normal Operating Hours Of The Clinic Services. If It Is Not Possible To Reschedule The Patient Within Seven (7) Calendar Days And The Vamc Must Make Alternate Arrangement To Have The Patient Sent To Another Local Facility For The Tests, The Contractor Shall Bear The Costs Associated With Such Re-procurement. The Vamc Will Provide The Contractor With An Itemized List Of Costs As A Result Of Any Service Failure And Cost Will Be Deducted From The Contractor S Invoice For The Period Involved. contractor Shall Be Responsible For The Overall Housekeeping Of The Unit Including But Not Limited To Removal And Proper Disposal Of All Debris Daily Or As Often As Necessary To Maintain A Sanitized And Neat Environment In Accordance With The Conformance Standards. contractor Shall Be Responsible For All Equipment While On Vamc Premises. At Least One Of Contractor S Personnel Must Be Present During Working Hours While The Equipment Is Located On The Vamc Campus. The Vamc Will Not Be Held Responsible For Any Loss Or Damage To The Contractor S Property, Which May Be Vandalized Or Damaged, Including The Mobile Unit While On Site. Contractor Shall Maintain Property Insurance On All Equipment Throughout The Duration Of The Contract And The Successful Contractor Shall Provide Proof Of Insurance As Required Herein. Contractor Key Personnel Qualifications And Responsibilities a Proposal Will Be Considered Only From Offerors Who Are Regularly Established In The Business Called For, Who Are Financially Responsible And Have The Necessary Equipment And Personnel To Furnish Service In The Volume Required For All Items Under This Solicitation. The Successful Contractor Shall Meet All Federal, State And Local Codes And Requirements For The Operation Of This Service And Equipment Provided. Employees Authorized By The Contractor To Perform Services Under This Specification And Any Resulting Contract, (including All Technologists) Shall Be Licensed And/or Registered In A State, Territory Or Commonwealth Of The United States Or The District Of Columbia. Contractor Shall Provide With His Or Her Signed Proposal, A Description Of All Personnel, Who Will Be Providing Services Under This Rfp. These Personnel Shall Include, But Not Be Limited To The Technologists, Support And Driver Staff Who May Visit A Medical Center As Part Of Their Duties Under This Contract Or Have Access To Confidential Personal Patient Information. In Addition, The Technologists Shall Be Certified In The Specific Modality Being Performed As Defined Herein. The Contractor Shall Provide Documentation Of Training And Competency Of All Proposed Technologists In All Of The Following Areas: ultrasound Imaging general Radiology Imaging operation Of Mobile Unit/s And Software Applications license To Operate Motorized Vehicle Contractor Key Personnel Qualifications And Responsibilities contractor Shall Provide All Required Modality Certified Technologists And Any Qualified Support Staff (as Patient Volume Requires) Necessary To Provide Services For The Vamc Patients Unless Government Opts To Utilize Qualified Government Staff. if Additional Technologists Are Required To Increase Services Under This Contract, The Contractor Shall Be Requested To Provide A Written Description Of Those Personnel To The Administrative Contracting Officer For Approval And Security Clearance (background Investigation) Prior To The Commencement Of Any Additional Services. the Contractor Is Required To Develop And Maintain The Following Documents For Each Contractor Employee Working On The Contract: Credentials And Qualifications For The Job; A Current Competence Assessment Checklist (an Assessment Of Knowledge, Skills, Abilities And Behaviors Required To Perform A Job Correctly And Skillfully; Including Knowledge And Skills Required To Provide Care For Certain Patient Populations, As Appropriate.); A Current Performance Evaluation Supporting Ability Of The Contractor Employee To Successfully Perform The Work Required In This Solicitation; And Listing Of Relevant Continuing Education For The Last Two (2) Years. The Contractor Will Provide Current Copies Of These Records At The Time Of Contract Award And Annually On The Anniversary Date Of Contract Award To The Contracting Officer S Representative (cor), Or Upon Request, For Each Contractor Employee Working On The Contract. Qualifications Of Personnel Are Subject To Review And Final Approval By The Facility Chief Of Staff And Chief Of Radiology. personnel Assigned By The Contractor To Perform The Services Covered By This Contract Shall Be Proficient In Written And Spoken English (38 Usc 7402). Contractor S Technologists Will Be Required To Pull From Ris Worklist And/or Type Patient Information Into The Imaging System Computer Ensuring That All Images Are Identified With The Correct Patient Information To Include Full Name, Social Security Number, Date/accession Number And Modality Type. Contractor S Assigned Personnel Must Be Computer Literate In The Type Of Software And/or Hardware Associate With Their Duties. the Technologist Shall Complete Training For Government Supplied Software And Hardware Required For Completion Of Exams Performed. mobile Unit Driver Shall Be Licensed As Applicable To Operate And Drive The Mobile Vehicle In Which The Unit Is Housed. Contractor Technical Employees Shall Be Cpr Bls Certified And Are Authorized To Initiate This Life-saving Act If Necessary. the Imaging Technologists Shall Be Trained And Qualified To Identify Contraindications To Imaging Exams. imaging Technologist Shall Be Responsible To Screen Patients Prior To Performing Exams To Verify The Patient S Identification, Pregnancy Status, Breastfeeding Status, And Confirm The Procedure To Be Performed Prior To Commencement Of Any Services. Disqualification Of A Patient From The Exam Must Be Documented And Provided To Radiologist And/or Cor Before The Patient Leaves The Imaging Unit. the Technologist Is Responsible For The Initial Assessment And Identification Of Medical Emergencies And Initiating The Emergency Response Procedure For Patients In Their Care. The Training For This Will Be A Part Of Initial Facility Orientation. technologist Shall Ensure That All Imaging Exams Shall Be Acquired And Processed Per Procedures And Protocols Provided By The Facility Radiology Physicians. Raw And Processed Data Remain The Property Of The Government. va Radiology Physicians Will Perform Interpretations Of The Examination(s). Unsatisfactory/non-diagnostic Examinations Shall Be Re-performed At The Discretion Of Designated Radiology Physician. Certifications / Licensing Of Technologist vendors Shall Submit With Their Offer The Following Documents: copy Of All Personnel S Current Licenses (certification / Registration) list Of Experience Of Proposed Contract Employees competency Checklist cpr Bls Certificate Additional Requirements For Contractor Personnel And Contractor Operation: contractor Shall Provide The Vamc Seven (7) Day Per Week Telephone Access To The Mobile Company Used In Performance Of This Contract. services Provided By The Contractor Shall Be Performed Within The Policies, Procedures And Regulations Of The Vamc, To Include The Following Medical Center Memorandums: To Be Updated Before Being Published. the Contractor's Radiation And Patient Safety Policies Must Meet Or Exceed The Vamc Policies For Standards Of Care. The Contractor S Current Policies For Radiation And Patient Safety Must Be Included With Proposal For Review By The Vamc. If Policies Are Found To Be Less Stringent Than Vamc Policies, Contractor Must Meet Or Exceed The Vamc Policies For Standards Of Care. contractor Shall Meet The Safety Requirements Of Posting Radiation Hazardous Signs Around The Mobile Unit And Make Certain The Electrical Power Cable Is Under A Metal Cover, If It Crosses The Crosswalk. neither The Contractor Nor The Contract Personnel Shall In Any Way Undertake The Practice Of Medicine, Render Medical Opinions Or Services Other Than Those Services Required To Support The Well-being Of The Patient, Or In Any Way With The Patient Other Than To Provide All Ancillary And Technical Services Required For The Operation Of The Unit. The Government May Evaluate The Quality Of Professional And Administrative Services Provided But Retains No Control Over The Medical Aspects Of Services Rendered, In Accordance With Far 37.401(b), Non-personal Health Care Services. Personnel Policy the Contractor Shall Be Responsible For Protecting The Personnel Furnishing Services Under This Contract. To Carry Out This Responsibility, The Contractor Shall Provide The Following For These Personnel: worker S Compensation professional Liability Insurance income Tax Withholding social Security Payments holiday Pay health Examinations, Including, But Not Limited To: Tuberculosis Testing Contractor Shall Provide Proof Of A Negative Reaction To Purified Protein Derivative (ppd) Testing. A Negative Chest Radiographic Report For Active Tuberculosis Shall Be Provided In Cases Of Positive Ppd Results. The Ppd Test Shall Be Repeated Annually. Rubella Testing Contractor Shall Provide Proof Of Immunization For Measles, Mumps, Rubella Or A Rubella Titer Of 1.8 Or Greater. If The Titer Is Less Than 1.8, A Rubella Immunization Shall Be Administered With Follow-up Documentation To The Cor. Oig List Of Excluded Individuals / Entities in Accordance With The Health Insurance Portability And Accountability Act (hipaa) And The Balanced Budget Act (bba) Of 1977, The Office Of Inspector General Has Established A List Of Parties And Entities Excluded From Federal Health Care Programs. Specifically, The Listed Parties And Entities May Not Receive Federal Health Care Program Payments Due To Fraud And/or Abuse Of The Medicare And Medicaid Programs. therefore, All Offerors Shall Review The Oig List Of Excluded Individuals/entities On The Oig Web Site At Www.hhs.gov/oig To Ensure That The Proposed Candidate(s) And/or Firm(s) Are Not Listed. Offerors Should Note That Any Excluded Individual Or Entity That Submits A Claim For Reimbursement To A Federal Health Care Program, Or Causes Such A Claim To Be Submitted, May Be Subject To A Civil Monetary Penalty (cmp) Of $10,000 For Each Item Or Service Furnished During A Period That The Person Or Entity Was Excluded And May Also Be Subject To Treble Damages For The Amount Claimed For Each Item Or Service. Cmp S May Also Be Imposed Against Health Care Providers And Entities That Employ Or Enter Into Contracts With Excluded Individuals Or Entities To Provide Items Or Services To Federal Program Beneficiaries. by Signing The Offer, The Contractor Certifies That He/she Has Reviewed The Oig List Of Excluded Individuals/entities And That The Proposed Candidate(s) And/or Firm Are Not Listed As Of The Date The Offer Was Signed. Tort Claims the Federal Tort Claims Act Does Not Cover Contractor Employees. When A Contractor S Employee Has Been Identified As A Provider In A Tort Claim, The Contractor Employee Is Responsible For Notifying The Contractor S Legal Counsel And/or Insurance Carrier. Any Settlement Or Judgment Arising From A Contractor Employee S Action Or Non-action Is The Responsibility Of The Contractor And/or Insurance Carrier. supporting Information schedule contractor Shall Perform Clinical Services Up To 10 Hours Per Day On A Weekday Or Weekend To Be Established Independently With The Vamc. Services Are Based On Demand Of Patient Exam Volumes And/or Limited Equipment Availability Internal To Va. If There Is A Need To Increase The Number Of Days Per Week In Order To Accommodate Patient Services, The Government Reserves The Right To Increase The Number Of Days As Noted Herein. Contractor Will Be Given At Least Sixty (60) Calendar Days Notice Of The Vamc S Intention Of Increasing The Number Of Days Per Month For Which The Contractor Will Perform Services On Site. Additional Days Periodically May Be Added To Meet Backlog Of Exams With Sufficient Notice, Not To Exceed Thirty (30) Days. Additional Days Of Service Will Be Performed For Same Daily Lease Rate Or Less. Contractor Will Provide Additional Services For Emergency Patient/s During Same Service Date If Required For Patient Care. Overtime Charges Are Not Authorized. Schedule Rate Will Be Based On 8 Hour Or 10-hour Days Of Direct Clinical Care. Start Of Time And/or Qc Time Will Be Outside Of Direct Clinical Care Hours. Unresolved Scheduling Conflicts Will Be Decided By The Administrative Contracting Officer; The Decision Made Will Be Final. the Contractor Shall Be Required To Confirm The Scheduled Examinations, By Contacting The Cor Or Designee Two (2) Business Days Prior To The Date Of Services. Procedures Will Be Established And Will Be Mutually Agreed Upon Between The Cor, Aco And The Successful Contractor During The Post-award Orientation. the Contractor, Based On The Knowledge Of Their Imaging System Shall Determine A Maximum Number Of Patients That May Be Imaged Within A Day Where The First Patient Begins At 8:00 A.m. In Accordance With The Above, Vendors Shall Submit With His/her Signed Proposal, A Proposed Schedule Based Upon The Level Of Expertise Of The Proposed Contractor Personnel. normal Hours Of Operation contractor Personnel Shall Be Available On Site To Perform Exams On Patients On The Scheduled Weekday, Excluding Federal Holidays. The First Exam Will Start At 8:00 A.m. Unit Delivery, Setup And Daily Quality Control Procedures Shall Be Performed Prior To First Exam And Will Not Delay The Start Of The Examinations. Contractor And Cor Shall Mutually Agree Upon A Schedule Establishing Dates And Time For The Mobile Unit With Technicians To Be Present On Station. Hours Of Operation Must Be Approved In Advance By The Cor. national Holidays And The Weekly Schedule the Eleven (11) Holidays Observed By The Federal Government Are New Year S Day, Martin Luther King S Birthday, Washington S Birthday, Memorial Day, Juneteenth, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving, And Christmas, And Any Other Day Specifically Declared By The President Of The United States To Be A National Holiday. The Government Reserves The Right To Request An Alternate Day For Performing Services To Be Agreed Upon Between The Cor And The Contractor. daily Access To The Cboc Facilities the Contractor Will Be Responsible For Contacting The Cboc Office Manager At The Site Of Service At The Time Of Arrival. The Contractor Will Also Be Responsible For Contacting The Va Police At The Closing Of Each Workday To Ensure That Both The Building And The Data Port Connections Are Secured. The Location And Contact Numbers Will Be Provided By The Cor To The Contractor Following Contract Award. commencement Of Services commencement Of Service Date Is To Be Coordinated With The Cor. Unit Must Be Ready For Patient Services No Later Than 45 Days After Contract Award, Unless Otherwise Agreed To Between The Contracting Officer And The Contractor. inspection And Acceptance the Delivery Location Of The Mobile Unit Site Shall Be Coordinated With The Cor; Inspection And Acceptance Of All Work Performance, Reports And Other Deliverables Under This Contract Shall Be Performed At The Place Of Delivery. deliverables Will Be Inspected For Content, Completeness, And Accuracy And Conformance To Contract Requirements By The Cor Or His/her Designee. Inspection Will Include Validation Of Information Or Software Through The Use Of Automated Tools And/or Testing Of The Deliverables, As Specified In The Contract Order. The Scope And Nature Of This Testing Must Be Negotiated Prior To The Contract Award And Will Be Sufficiently Comprehensive To Ensure The Completeness, Quality And Adequacy Of All Deliverables. reports, Documents, And Narrative Type Deliverables Will Only Be Accepted When All Discrepancies, Errors Or Other Deficiencies Identified In Writing By The Government Have Been Corrected. maintenance Logs Will Be Made Available Upon Request. non-conforming Products Or Services non Conforming Products Or Services Will Be Rejected. Unless Otherwise Agreed By The Parties, Deficiencies Will Be Corrected Within Seven (7) Days Of The Rejection Notice. If The Deficiencies Cannot Be Corrected Within Seven (7) Days, The Contractor Will Immediately Notify The Cor And The Administrative Contracting Officer Of The Reason For The Delay And Provide A Proposed Corrective Action Plan Within Seven (7) Working Days. contractor S Responsibilities contractor Will Be Responsible For The Following: training Vamc Staff On The Use Of The Contractor-provided Workstations And Image Analysis Software. timely Delivery Of The Mobile Unit Such That Contractor May Facilitate The Following Startup Functions Prior To The Commencement Of Services: contractor Shall Perform Tests As Necessary So That The Mobile Unit And All Associated Equipment Is Fully Operational, Safe, And Ready For Services So That The Schedule Of Patients Is Maintained At All Times. contractor Shall Ensure That The Mobile Unit Is Properly Positioned And Docked. The Temperature Within The Unit Is Set And Maintained Prior To Performing Services. contractor Shall Ensure That The Mobile Unit Is Level And Set For The Safety Of Patients And The Appropriate Utilities Connected For Proper Warm-up Of All Onboard Systems. contractor Shall Allow For Sufficient Time For Contacting The Va Police When Gaining Access To The Vamc. communications Will Be Operational. daily Quality Control Time Must Not Interfere With The Regular Scheduling Of Patients For Exams. This Start Up Functions Must Be Completed Prior To 8:00 A.m. On Each Day When Unit Is Scheduled To Be On Site In Time For The First Patient To Be On Table At 8:00a.m. contractor Will Be Responsible For Providing Quality Review To Ensure Quality Diagnostic Images At All Sites. The Vamc Reserves The Right To Require Corrective Action If Image Quality Or Other Service Problems Are Brought To The Attention Of The Contractor. contractor Will Be Responsible For Monitoring The Number Of Scans Performed, By Maintaining A Daily Log. contractor Shall Be Joint Commission Accreditation Of Healthcare Organizations (jcaho) Certified Or Shall Follow Established Jcaho Guidelines As They Pertain To Mobile Operations, And Patient Safety And Shall Follow The Guidelines Of The Department Of Veterans Affairs (va) And Occupational Safety Health Administration (osha). Jcaho Accredited Quality Assurance Survey Reports Shall Be Provided To The Contracting Officer S Representative (cor) Consistent With Joint Commission Recommendations. emergency Repairs contractor Shall Provide, At No Cost To The Vamc, All Emergency Services To Include All Required Personnel, Parts And Labor, And Preventive Maintenance/repairs Of Structure And Equipment To Maintain A Safe Environment As Recommended By The Original Equipment Manufacturer (oem) Recommendations/specifications In Accordance With The Agreed Upon Schedule With The Cor. in The Event Of An Equipment Failure During Normal Working Hours While In The Performance Of The Contractor S Services, The Contractor Shall Notify The Cor Or Designee Immediately After Discovery Of Equipment Failure While On Site. All Emergency Repairs Are The Responsibility Of The Contractor. the Cor Shall Determine If Appointments Previously Scheduled Should Be Cancelled And Rescheduled As A Result Of The Equipment Failure. In The Event That The Equipment Fails, And The Failed Equipment Is Un-repairable, The Contractor Must Obtain An Alternate Unit Which Will Be Available On The Next Scheduled Day, And Which Meets All The Requirements Of The Resulting Contract To Ensure That Schedule Services Will Be Performed As Agreed Upon Under This Contract. Contractor-furnished Facilities, Services, Supplies And Equipment contractor Shall Contact The Cor To Make The Necessary Arrangements For A Site Visit Of The Actual Locations Where The Mobile Unit Will Be Located So That Precise Measurements Can Be Taken By The Contractor Who Shall Be Responsible To Confirm Compatibility Of Space. contractor Shall Be Held Responsible For Any Damages, Which May Be Done To The Property During Delivery, Hookup And/or Removal Of Equipment At The Site. Any Damages Caused By The Contractor Shall Be Performed At The Contractor S Expense To The Satisfaction Of The Facility Chief Of Engineering. proper Installation/staging Of The Contractor S Furnished Equipment Including The Mobile Unit Must Be Completed In Accordance With Industry Standards, All Osha Regulations, And Applicable Manufacturer S Recommendations. The Above Must Be Completed Prior To Commencement Of Services. Dates And Time For Completion Of The Above Shall Be Mutually Agreed Upon Between The Vamc And The Contractor. the Contractor Will Supply All It Technical Support And Vendor Specific Engineer For All Provided Systems. Contractor Provided Information Systems Technical Support And Engineer Will Assure Connectivity And Functionality Of All Equipment During Initial Setup And Thereafter. Contractor Will Assure Availability Of All Support For Timely Contact And Resolution. Government-furnished Facilities, Services, Supplies And Equipment the Vamc Shall Provide All Patient Services, With Exception Of The Services Required Of The Contractor Within This Contract, Including The Following: retain Full Medical Responsibility For Its Patients. Contractor Shall Be Responsible For Patient Upon Pickup At The Vamc Designated Waiting Area, While On The Mobile Unit And During The Entire Scanning Procedure Until Patient Is Returned To The Designated Waiting Area. approval And Scheduling Of Patients For Exams Will Be Provided By The Vamc Where The Services Are Provided. The Vamc Will Fax A Patient List Of Exams And Exam Times To The Contractor In A Fashion That Is Timely And Convenient To The Contractor. The Contractor Will Follow Up With Phone Verification Of The Patient List. the Vamc Will Be Responsible For Transporting Patients To And From The Facility Furnished Waiting Area. Contractor Shall Be Responsible For Picking Up And Transporting The Patient To The Mobile Unit. Upon Completion Of Services, The Contractor Shall Return Patient To The Designated Waiting Area Within The Vamc. the Vamc Shall Ensure Each Patient Arriving For The Scans Has Physician Orders To Receive Services And Such Other Forms Or Information As Required. Contractor Is Required To Identify Patients Using Two Unique Full Identifiers Prior To Performing Radiology Exams. the Vamc Will Designate In Writing One Or More Qualified Physicians Who Will Review Orders For Appropriateness, Interpret Reports And Take Such Other Steps As May Be Medically Necessary. the Vamc Will Provide All Medical Supplies, Facilities, Personnel, And Physicians Required To Provide Patients With Such Emergency Medical Care As May Be Required, Including Oxygen, Aspirator And Defibrillator When Deemed Necessary. the Vamc Nurses And Physicians Will Have The Ability To Provide Medication For Exam Specific Procedures. contactor Shall Provide, During The Post Award Orientation, A Reasonable List Of Incidental Supplies Which May Be Necessary (excluding Those Which Are Defined As The Contractor S Responsibility). the Contractor Agrees To Ensure Compliance/acceptance Testing Of The Imaging Equipment Is Performed On At Least An Annual Basis Or If Major Components Of The Machine Is Serviced Or Replaced. The Compliance/acceptance Tests Will Be Done In Accordance With Nationally Recognized Standards. the Contractor Is Responsible For Ensuring The Compliance Testing Of The Mobile Imaging Device By A Qualified Medical Physicist. A Qualified Medical Physicist As Defined Is An Individual Who Is Certified By The American Board Of Radiology, American Board Of Health Physics, Or American Board Of Medical Physics In The Appropriate Disciplines Of Radiologic Physics And Maintain State Certification As A Health Physicist In The States Of Tennessee. Cancellations / No Charge Services the Contractor Will Not Charge The Vamc For Services Or Supplies When The Vehicle And/or Imaging Units Are Inoperable Due To Equipment Malfunction, Staff Shortage, Or Any Other Fault On The Part Of The Contractor. Removal Of Contractor S Equipment contractor Will Be Responsible For The Timely Removal Of The Mobile Imaging Unit From The Vamc Premises As Agreed Upon With The Cor Not To Exceed An Eight (8) Hour Period After Completion Of The Last Procedure Is Performed Unless Otherwise Agreed Upon By The Cor, Aco And The Contractor. Contractor Will Also Be Responsible For The Following Daily Exit Functions: ensure That The Day S Entire Exam Data Is Completely Transferred To Each Contractor-provided Advanced Analysis Workstation Inside The Vamc And To The Vista Imaging Archiving System. Contractor Personnel Will Complete A Checklist To Assure That All Patient Images Transferred Completely To The Primary Contractor-provided Advanced Analysis Workstation And Provide This Signed Checklist To The Cor Or Other Designee. all Patient Exam Data Is Purged From Contractor S Computer Systems Once It Is Verified That Exams Are Viewable On The Primary Contractor-provided Advanced Analysis Workstation. at The Termination Of The Contract, The Contractor Will Remove The Hard Drives Of The Workstations And Supply Them To The Cor. va Information Retained By The Imaging Units And Other Contractor Equipment Will Be Erased At The End Of The Day After The Last Patient Exam Has Been Confirmed To Have Been Transmitted Successfully To Va Picture Archiving System To Include Thin Slices If Further Post Processing Is Required. The Security Of Information Retained By The Imaging Units And Other Contractor Equipment Both During The Contract Period And Post Contract Period Will Be The Responsibility Of The Vendor. all Connections From The Unit To Property Are Properly Disconnected. any Temporary Site Preparations Are Removed Upon Completion Of Services On A Daily Basis. Documentation / Reports the Contractor Will Provide To The Cor Equipment And Maintenance Reports If Requested By The Cor During The Duration Of The Contact. The Contractor Will Also Provide System Pre-check And Associated Documentation At The Time The Unit Is Set Up At The Site Where Services Are To Be Performed. This Is To Ensure Safety Of Equipment Utilized By Vamc Personnel/beneficiaries. the Contractor Will Permit On-site Inspection By Personnel Selected Without Prior Notice To Ensure The Contractor S Equipment Is Operated In Accordance With Appropriate Safety Guidelines And/or Regulations As Applicable. additional Reports/documentation Required By The Successful Contractor Prior To Commencement Of Services Of Both Technologist And Pm/repair Services, Unless Otherwise Stated. This Visn May Require Specialized Documentation To Satisfy The Requirements Of Local State And Federal Government Agencies, And Independent Consultants Such As The Joint Commission On Accreditation For Hospitals, As Well As For Services Rendered Verification For Payment Of Monthly Statement. At A Minimum, The Following Information Will Be Provided To The Contracting Officer: Certificate Of Insurance, Including, But Not Limited To, Professional Liability, Worker S Compensation, Liability, And Property Insurance Of Contractor S Furnished Equipment Which Shall Be Submitted To The Administrative Contracting Officer Within Ten (10) Calendar Days Of Receipt Of Notification Of Award. It Is Agreed Upon And Understood That The Vamc Will Not Be Held Responsible For Any Damage Or Vandalism, Which May Be Caused To The Contractor S Equipment While On Premises. Copy Of Appropriate Business License Submitted With Proposal. Contractor S Employees Certifications/registrations, Competency Check List And Training Certificates To Be Submitted With Signed Proposal As Defined Herein. Technologists Health Examination Records Of Annual Tb Skin Test And Recent Chest X-ray If There Is A History Of Positive Tb Skin Test. Copies Of Records Shall Be Submitted To The Contracting Officer Prior To Commencement Of Services. Copies Of All Required Federal, State, And Local Licenses, Annual Physicist Inspection, And Physicist Inspections Post Tube Replacements. Documentation Of Scanner(s) Make, Model, And Year Of Manufacture And Specifications, Plus Brand And Release Number Of Reconstruction Software For Contractor Supplied Independent Interpretation Workstation. Documentation To Be Submitted With Signed Proposal. A Copy Of The Coach Requirements For Parking/space Will Be Submitted With Signed Proposal. documentation Of A Proposed Schedule Included In The Submission Along With Maximum Throughput Of Proposed System(s) Will Be Submitted With Signed Proposal. documentation Of Jcaho Certification (if Available) Will Be Submitted With Signed Proposal. attachment A potential Areas Of Service main Campus james H Quillen Vamc 99 Sidney St mountain Home, Tn 37684 (gps Location) james H. Quillen Vamc 809 Lamont St johnson City, Tn 37604 community Based Outpatient Clinics (cboc): below Are Potential Sites For Service But Not Limited To: norton Va Clinic 654 Highway 58 East Norton, Va 24273 bristol, Va Suite 201 3130 Lee Highway Bristol, Va 24202 vansant Va Clinic 1941 Lover S Gap Road, Suite A Vansant, Va 24656 marion Va Clinic 1583b North Main Street Marion, Va 24354 jonesville Va Clinic 32613 Wilderness Road, Suite 101 Jonesville, Va 24263 morristown Va Clinic 925 E. Morris Boulevard Morristown, Tn 37813 campbell County Va Clinic 130 Independence Lane, 3rd Floor Lafollette, Tn 37766 rogersville Va Clinic 401 Scenic Drive Rogersville, Tn 37857 dannie A Carr Va Clinic 1124 Blanton Dr Sevierville, Tn 37862 mountain City Va Clinic 1141 Cold Springs Road Mountain City, Tn 37683