Heater Tenders

Details: Request For Information (rfi) – Steam Generator Installation At Area 1-42 this Request For Information (rfi) Is Issued As Market Research. All Requirements Identified In This Rfi Are Tentative And Will Be Finalized Prior To The Release Of Any Request For Proposal (rfp). This Rfi Is For Planning Purposes Only And Shall Not Be Considered A Request For Proposal (rfp), Request For Quote (rfq), Or As An Obligation On The Part Of The Government To Acquire Any Products Or Services. The Information Provided May Be Utilized By The Air Force Research Laboratory (afrl) In Developing Its Acquisition Strategy Should A Decision Be Made To Proceed With Acquiring The Items/services Listed In This Rfi. The Information Received In Response To This Rfi May Be Included In One Or More Future Solicitations. No Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Synopsis Or Any Follow-up Information Requests. The Purpose Of This Rfi Is To Gain Knowledge Of Potentially Qualified Sources And Their Size Classifications (small Business, Large Business, Etc.). The Information Provided Is Entirely Voluntary And Will Not Impact The Ability To Bid On Future Requirements. requested Information. the Government Requests Interested Offerors Who Believe They Can Fully Support This Requirement Furnish The Following Information: 1. Company Name, Cage Code And Uei Number, Address, Points Of Contact, Phone Numbers And E-mail Addresses. 2. Information Should Include A Brief Description Of Experience In Providing The Type Of Support Described In The Requirements. The Information Package Must Be Clear, Concise, And Complete. The Air Force Is Under No Obligation To Provide Feedback To The Company, Or To Contact The Company For Clarification Of Any Information Submitted In Response To This Request. 3. Identification Of Business Size (small Or Large) And Identify The Socioeconomic Disadvantaged Category, As Defined The Federal Acquisition Regulation Far Part 19 And Also Currently Listed In The System For Award Management (sam). Small Business Size Standards Are Published By The U.s. Small Business Administration (sba) And May Be Found At Www.sba.gov/size/sizetable2002.html. the Potential North American Industry Classification System (naics) Codes Assigned To This Procurement Is 335312 “motor And Generator Manufacturing” And The Small Business Size Standard Is 1,250 Employees. The Potential Product Service Code Assigned To This Procurement Is 6115 “generators And Generator Sets.” 4. Details Regarding The Requirements Your Company Is Able To Provide And Any Applicable Restrictions. 5. An Industry Day Will Be Held 22 January 2025 For Interested Contractors To View The Site. If You Would Like To Participate, Please Complete The Document Entitled “afrl Visitor Pre-announcement” For Each Individual Who Will Attend In Order To Gain Access To Edwards Air Force Base. - Requirements – Steam Generator Installation *** Please Review Both Attached Statement Of Work Documents For Complete Requirement Information. Please Note The Document Titled Single Steam Generator-sow Covers The Specifications For The Current Requirement Of The Single Steam Generator, While The Document Titled Complete Steam Generator Project-sow Is For The Entire Anticipated Project. The Contractor Shall Reference And Work The Documents Together To Understand The Scope Of Work. *** the Government Is Seeking To Identify Qualified, Experienced, And Interested Firms, Who Can Perform In Accordance With The Requirements Described In The Attached Statement(s) Of Work For The Installation Of One (1) Steam Generator Which Will Be Used To Replace An Aging Steam Generation System In Use At Area 1-42 That Includes Large Spherical Saturated Steam Storage Vessels, Heat Exchangers, Process Heaters, Pumps, Supply And Return Piping And Other Hardware To Generate And Provide The Required Mass Quantity Of Steam At Specified Pressure And Temperature. The Intent Of This Project Is For The Contractor To Provide The Air Force Project Manager One (1) Safe, Complete, Fully Functional And Operable Steam Generator To Be Used To Supply Saturated Steam For The Afrl Area 1-42 Steam Plant. note: The Air Force Is Planning To Install A Total Of Three (3) Identical Steam Generators, Starting With The Single Generator Being Acquired With This Requirement And The Other Two (2) Steam Generators Which Will Be Installed As Part Of The Overall System In The Future. The Scope Of Work For This Acquisition Includes Only The First, Single Steam Generator At This Time. The Air Force Project Manager Has Made A Good Faith Effort To Update All Relative Project Documents To Address The Inclusion Of Only The Single Steam Generator And Clearly Identify Other Two (2) Steam Generators Are Intended For Installation In The Future But Are Not Included As Part Of The Current Scope Of Work. Likewise, The Air Force Project Manager Has Endeavored To Identify Interface Points On Piping, Platforms, Conduit And Other Systems Where Connections To Provide Service To The Future Steam Generators Will Be Required. If The Contractor Identifies Any Scope, Interfaces Or Other Items That Are Not Clear As To The Intent Of What Is To Be Included In The Current Scope Of Work And What Is Intended Future Installation, The Contractor Shall Bring This To The Attention Of The Air Force Project Manager Immediately. technical Requirements: built In Accordance With Asme B&pvc Section I, 2023 volume: Approx. 12,400 Cubic Feet pressure: Maximum Working Pressure: 600 Psi; Maximum Design Pressure: 620 Psi temperature: Maximum Working Temperature: 500f steam Generation And Pressure: 110 Lbm/sec @ Initial Temperature 500f For 12 Min Total o Yields 79,200 Lbs Of Steam At ~600 Psig minimum Pressure After Release Is 100 Psig minimum 3 Runs Before Make-up Water Is Required steam Reheats At Maximum 20 Hrs the Steam Generator Shall Be Designed, Fabricated, Tested, Inspected And Stamped In Accordance With The Requirements Of The Asme B&pvc Section I, Rules For Construction Of Power Boilers, Latest Edition. The Steam Generator Shall Be Stamped With An Asme B&pvc Section I. “asme” And “s” Certification Mark As Noted In Pg-105 Of Asme B&pvc Section I. The Contractor Shall Be Authorized By Asme To Perform The Identified Code Construction And Shall Have The Appropriate “s” Stamp. the Steam Generator Shall Be A Fire Tube Type Boiler And Meet Requirements For The Same. the Contractor Shall Provide A Manufacturer’s Data Report Form, Form P-2 For The Steam Generator. All Required Documentation, Including, But Not Limited To, Calculations, Welding Certifications, Non-destructive Testing (nde) Records, Certified Material Test Reports (cmtrs), Pressure Testing, Master Data Report Form And All Other Documentation As Required By Asme B&pvc Section I For The Design, Fabrication, Welding, Inspection, Nde, Testing And Any Other Activities Shall Be Furnished As Part Of The Code Package For The Steam Generator. the Steam Generator Shall Meet The Requirements Of Asme B&pvc Section I, Part Pg General Requirements For All Methods Of Construction, Part Pw Requirements For Boiler Fabricated By Welding, Pft Requirements For Fire Tube Boilers. The Contractor Shall Determine, Depending On The Specific Design And Methods Selected To Design And Fabricate The Steam Generator, Other Parts And Appendices Of Asme B&pvc Section I That Are Applicable To The Scope Of This Project. all Pressure Boundary Materials Used In The Fabrication Of The Steam Generator Shall Be Provided With Certified Material Test Reports (cmtrs) As Required In Asme B&pvc Section Ii. All Pressure Boundary Materials Shall Be Clearly Stamped Or Otherwise Marked With The Corresponding Heat Number From The Cmtr. Any Requirements For Marking Or Stamping Plates Or Other Pressure Boundary Materials Identified In Asme B&pvc Section I That Are In Addition To Any Marking Or Identification Of Materials Noted In Asme B&pvc Section Ii Shall Be Met. The Contractor’s Quality Control Plan Shall Address Transfer Of Heat Numbers And Traceability For Individual Pieces And Parts Cut Or Altered. six Major Tasks Include: design And Engineering procurement Of Materials, Parts, Equipment For Fabrication fabrication Of Steam Generator At Afrl Staging Area transport And Placement Of The Steam Generator final Installation Of Generator And Periphery Systems, Piping, Insulation, Blowers And Other Parts And Equipment final Acceptance Testing And Training anticipated Period Of Performance: 1 June 2025 – 31 May 2027 fob Destination: Edwards Afb, Ca 93524. responses. afrl Is Seeking U.s. Sources With The Capability To Provide The Items/services Listed In This rfi. All Replies Are To Be Provided To The Contracting Officer, Tyler Pittmon Tyler.pittmon@us.af.mil And Contract Specialist, Suzanna Kussman, Suzanna.kussman@us.af.mil all Responses To This Rfi Must Be Received No Later Than 10 January 2025 At 4:00 P.m. Pst.

Details: Description Republic Of The Philippines Department Of Health Western Visayas Sanitarium And General Hospital Santa Barbara, Iloilo Invitation To Bid For Supply, Delivery And Installation Of Various Hospital Equipment Ib No. 2024-12-018-g The Western Visayas Sanitarium, Through Its Bids And Awards Committee (bac), Invites Suppliers/manufacturers/distributors To Apply For Eligibility And To Bid For The Hereunder Project: Name Of Project : Supply, Delivery And Installation Of Various Hospital Equipment Location : Western Visayas Sanitarium And General Hospital, Inangayan, Santa Barbara, Iloilo Approved Budget For : Php 34,665,000.00 The Contract (abc) Fund Source : Caf No. 2024-133-gf Delivery Period : Within Ninety (90) Working Days After Receipt Of The Notice To Proceed Line Items Abc: Php 34,665,000.00 Lot 1 No. Description Unit Of Measure Quantity Approved Budget Cost (php) 1 Electrical Machine. Brand New. Product Specifications: Combination Of Electrotherapy And Ultrasound; With 3 Independent Channels And Body Diagram Installed; Power Supply: Ac 100- 240 V, Number Of Channels: 3 Independent (2 For Electrotherapy, 1 For Ultrasound) Electrotherapy; Ten& Ems, Ultrasound Functions; Electrode Pads For Tens & Ems; Us Probe Head: Large And Small. Warranty -1 Year From Delivery And Installation. Unit 1 290,000.00 2 Hand Dynanometer. Brand New. Product Specifications: Hydraulic Adjustable Handle. Strength Can Be Viewed In Pounds Or Kilogram. Can Measure Up To 90kg (200lbs.). Durable Metal Gauge. Warranty –at Least 6 Months Upon Delivery And Installation. Unit 1 55,000.00 3 Parallel Bars. Brand New. Product Specifications: Adjustable And Foldable. Stainless Steel Bars And Steel Base. Height Adjust Within 26''-40''. Width -24''-36". Length Ranges: 7-10 Feet. Warranty -at Least 6 Months Upon Delivery And Installation Unit 1 50,000.00 4 Pulley System. Brand New. Product Specifications: Single Handle/dual Tower. Chest And Floor Height Mounted Handle. Easily Adjustable Handles. Wheelchair Accessible. Warranty –at Least 1 Year Upon Delivery And Installation. Unit 1 150,000.00 5 Pbx, Smart Hybrid. Brand New. Product Specifications: Designed For Telemedicine Use. Genuine And High Quality Brand. Pabx Built-in Extensions 16 Analog. At Least 2 Card Slots And 2 Slots Trunk Extension Card Switch System. Ability To Equip Sub-frame Ns-320; 12-32 Trunk Extensions. Sub-frame To Extend Pbx Ns300. Port Connected To The Main Frame. Dimensions: 40-45 X 35-36 X 86-90 Cms. Warranty –at Least 6 Months From Delivery And Installation * Unit 1 100,000.00 6 Uninterrupted Power Supply. Brand New. Products Specifications: Designed For Telemedicine Operation. 3000va. Output Power Capacity-3000va, Mount: 3u Rack Mountable. Nominal Output Voltage -230v. Dimensions: 20-22 X 19-20 X 5-6 Inches. Warranty –at Least 6 Months Upon Delivery And Installation. * Unit 1 400,000.00 7 Medical Waste Shredder. Brand New. Product Specifications: 20hp Motor Slow-speed And High Torque Dual Shaft Shredders, 5/16″ Wide Cutters, With Bearing Protection And Cleaning Fitters. Features: Efficiently Shred Syringes, Face Masks, Boxed Medical Waste, Pill Bottles, Etc., Available With A Split Cutting Chamber That Allows For Two Different Shred Widths Within One Shredder, The Manner Of In Feed And Output Are Also Divided. Includes Training And Certification, Warranty 1 Year Upon Installation Unit 1 350,000.00 8 Portable Multi-parameter Analyzer Flow Water Quality Testing. Brand New. Product Specifications: Measures Water Quality Parameter For Ph/ec/ise/do/temp. Mv/orp/px/resistivity/tds/sal./do Saturation. Features: Portable Device, Color High Contrast Lcd Touchscreen, Data Storage1000 Sets For Each Parameter, Support For Usb Communication, Ip65 Waterproof, Includes All Necessary Accessories And Consumables, Includes Training And Certification For Use, Warranty For 1 Year Upon Installation Unit 1 200,000.00 9 Water Purification System. Brand New. Product Specifications: 6000 Gdp Reverse Osmosis Machine. Up To 1200 Containers Per Day. Double U.s. Membrane. 2 Tanks 1000ltrs. For Raw & Product Water. At Least 28 Stages Of Water Filtration. To Include Piping Line From Water Station To Specified Areas Within The Health Facility. To Include Necessary. Building/structure For The Water Station. Service Warranty 1 Year After Delivery And Installation. To Include Service And User Training. Including Consumables: 50 Gallons Round Containers, 50 Gallons Slim Containers, 1 Sack Industrial Salt. * Unit 1 350,000.00 10 Anesthesia Machine With Cardiac Monitor. Brand New. Product Specifications: Main Gas Supply -oxygen, Air. Pin Index Supply System: Oxygen, Air. Ventilatior: With At Least Six (6) Ventilation Modes. Machine Must Be Able To Ventilate Patient Using The Preset Settings Provided By The End-user Even Presence Of Driving Gas Is Temporarily Unavailable. Ventilator Must Be Enclosed With Metal Casing To Prevent Entry Of Foreign Items Including Fluid. Ceramic Type Of Inspiratory And Expiratory Valve. Ventilator Must Have High Pressure Valve That Ensures Release Of Excess Pressure When Required. Ventilator Must Be Functional When Machine Is Connected Either Through Direct Power Supply Or Back Up Battery. Breathing System: The Volume Of The Compact Breathing System And Co2 Absorber Must Be 1.7l Excluding Hoses And Breathing Bag. Volume Of Co2 Absorber Reusable Canister Must Be 1.5l. With Bypass Valve Located In Breathing System Allowing Continuous Machine Operation While Changing Co2 Absorber. With Fresh-gas Decoupling Valve That Prevents Direct Entry Of Pressure In The Patient Airway When Pressing The O2 Flush Button, Peep And Pressure Limitation. With Breathing System That Can Be Detached From The Main Unit Without Tools Required. Breathing System Should Be Separated From The Main Unit With Mounting That Can Be Positioned From Any Direction Without Moving The Entire Anesthesia Machine. With Ceramic Type Of Inspiratory And Expiratory Valve. With Sample Gas Return Port. With Pup Off Pressure Release Valve Located At The Apl Valve. With Moisture Reduction System. Hot Steam Sterilization Can Be Carried Out At 134 ° C (273.2 ° F). With Heated Breathing System. Anesthesia Gas Supply Module: Range Of Fresh Gas Flow Indicators: 0.0 To 12.0 L/min. O2 Flush (bypass): At 87 Psi (6 Kpa X 100): Max. 75 L/min At 41 Psi (2.8 Kpa X 100): Min. 25 L/min. With Metering Valve And Dual Flow Tubes For Fresh-gas. With Integrated O2 Monitoring Located In The Screen. Vaporizer: With Two (2) Selectatec Vaporizer Mounting. With One (1) Unit Sevoflurane And One (1) Unit Isoflurane Vaporizer. Vaporizer Must Have No Cloth Component Which Allows Item To Be Functional Immediately Even Transporting It In An Upside Down Position. Oxygen Sensor: With Oxygen Sensor That Measures Percentage Of Oxygen. Flow Sensor: With Constant Temperature Hot-wire Anemometer Flow Sensor. Must Be Located Within The Anesthesia Unit Distal To The Patient Area. Flow Sensor Must Be Reusable. Auxillary Low Flow Oxygen: With Integrated Low Flow Oxygen Supply For Mask And Nasal Cannula Application. Writing Table/drawers/mounting: With At Least 3 Drawers As Storage For Other Accessories. With A Retractable Writing Table That Can Hold At Least 10kgs. Advanced And Safety Features: Functional Even The Battery Is Completely Discharged, All Pneumatic Functions Continue To Be Available (apl Valve, Breathing Pressure Gauge, Cylinder And Pipeline Gauges, Fresh Gas And Agent Delivery, And O2, Air, Flow Meters).manual Or Spontaneous Ventilation Can Be Maintained During Power Failure And Discharged Of Battery. In Case Of No Power And Totally Discharged Battery, Machine Must Be Shifted Automatically From Ventilator Mode To Manual Mode Without Any Switch Or Button Required. Start-up Time Must Be Less Than 15 Seconds. Power Input Data: Power Supply: Rating Non-configurable 100 To 240 Vac, 50/60 Hz, 145 Va. Battery Operation Time: Up To 2 Hours, Minimum Of 45 Minutes. Parameters: Minimum Tidal Volume (vt) Required: 20 Ml. Breathing Frequency (rate): 4 To 60 Bpm (1/min). Inspiratory Pressure: Peep + 5 To 65 Cmh2o. Inspiratory Flow (inspflow): 10 To 75 L/min In Volume And Pressure Control Modes, 10 To 85 L/min In Pressure Support And Simv/ps Modes. Inspiration Pause: 0 To 50 %. Simv Inspiratory Time: 0.3 - 4.0 Sec. Positive End Expiratory Pressure: (peep) 0 To 20 Cmh2o. Inspiration/expiration Ratio: (ti:te) 4:1 To 1:4. Pressure Limiting: 70 Cmh2o. Range Of Fresh Gas Flow Indicators: 0.0 To 12.0 L/min. Pressure Support Level: Peep + 3 To 20 Cmh2o. Min. Frequency For Apnoe-ventilation: (freq. Min.) 3 To 20 Bpm And “off”. Trigger Level: 2 To 15 L/min. Standard Accessories: One (1) Unit O2 Regulator, One (1) Unit Air Regulator, O2, Air Fittings And Hose Clamps, One (1) Unit Adult Anesthesia Circuit With 2l Bag. Biolight M12 Patient Monitor (basic Configuration). Technical Specification: Display/waveforms: Screen Size Display: Not Less Than 12" Color Tft Screen. Screen Navigation: Touch Screen With Quick Volume And Brightness Adjustment. Support Quick Key, Able To Access Specific Functions Or Perform Operations Easily And Quickly. No. Of Waveforms: At Least 7 Waveforms (using Standard Screen Display). Battery: Internal Battery Duration Must Be: ≥ At Least 240 (built In Battery). Can Upgrade Lithium Battery, Battery Power Supply ≥480 Min. Ecg: Ecg Leads: 3/5 Leads, Display Sensitivity: ×0.25, ×0.5, ×1, ×2, ×4,auto Gain, Must Have A Smart Lead Off Feature, Must Have An Ecg Calibration Feature, Must Have An St Segment Analysis And Monitoring. Heart Rate Range Must Be: Adu: 10 To 300 Bpm, Ped/neo: 10 To 350 Bpm, Must Have Two (2) Hr Averaging Method. With Ecg Multi-lead Synchronous Analysis Function, Analysis Of Multiple Cardiac Leads At The Same Time, Can Be Accurately Monitored In The Case Of Individual Lead Interference, With Intelligent Lead Fall Monitoring Function. St-segment Analysis Can Show The St Graphic, Which Help Indicates The St Alarm Status More Faster. Nibp: Nibp Measurements Must Comply With The American National Standard For Electronic Or Automated Sphygmomanometers: - (ansi/aami/iso 81060-2:2009, Ansi/aami Sp10:2002) In Relation To Mean Error And Standard Deviation. Measurement Mode： Manual, Auto, Stat, And Sequence. Sequence Mode Could Support 5 Different Modes. Maximum Measuring Interval In Auto Mode Must. Must Have An Overpressure Protection For Nibp. Temperature: Must Have Dual-channel Body Temperature Monitoring With Difference Display Measurements. Must Support Skin And/or Oral/rectal. If More Than One Temperature Probe Is Used, The Monitor Will Be Capable Of Calculating And Displaying A Delta Reading. Measuring Range: 0～50 ℃. Spo2: Must Be Used In Low Pi (perfusion Index). Resp: Detection Method: Respiratory Rate And Respiratory Waveform Must Be Monitored By Pulse Wave. Trends: Trend Data For All Parameters In Tabular And Graphic Formats Must Be: 180h. Stored Nibp Measurements Must Be: Up To 2400 Groups. Stored Alarm Events Must Be: 3000 Groups And Associated Waveform. Holographic Waveform Must Be 72 Hours. Printer/recorder: Must Support 3-channel Recorder To Realize Thermal Printing; Support Network Printing Function. Network Capability: The Ip Address Of Each Patient Monitor Shall Be User Configurable. Features: -the Monitor Must Provide Electronic Early Warning Scor （ews, Glasgow Coma Scale (gcs), And Oxycrg Screen. -oxycrg Screen Shows Two Trend Curves And A Compression Waveform, Support To Review 48 Hours Trend Curve And Compression Waveform On The Oxycrg Review Screen. -accessories Storage Box, Help Manage Accessories And Prevent Accessories Missing Or Broken Problem. -user Shall Be Able To Freeze The Waveforms On The Screen And Then Review It To Carefully Observe The Patient During This Time. -up To 4 Timers Shall Be Able To Be Configured On Monitor Display To Count Up Or Down The Required Time In Minute And Second With Audio Alarm To Alert User. - The Monitor Shall Provide Following Specific Working Modes: Standby, Intubation, Night, Privacy, And Demo Modes. Accessories Included: 3/5 Lead Ecg Cable, 3/5 Lead Ecg Lead Wires, Adult Spo2 Sensor, Pediatric Spo2 Sensor, Temperature Probe Skin, Temperature Probe Oral/rectal, Nibp Cuff Adult, Nibp Cuff Pedia, Wall Mount / Trolley, One (1) Unit Pediatric Anesthesia Circuit With 1l Bag, Two (2) Units Power Adapter. Includes Avr Machine For Anesthesia Machine. Warranty -2 Years From Delivery, Installation, And Training/orientation. Unit 1 3,300,000.00 11 Cardiac Monitor With Capnograph. Brand New. Product Specifications: Display/waveforms: Screen Size Display: Not Less Than 12" Color Tft Screen. Screen Navigation: Touch Screen With Quickly Volume And Brightness Adjustment By Gestures Operate. Support Quick Key, Can Easily And Quickly Access Some Functions Or Perform Operations. No. Of Waveforms: At Least 7 Waveforms (using Standard Screen Display). Size Must Be: At Least 175mm X 320mm X262mm. With Auto Speech Recognition Module Implements The Voice Interaction With The Patient Monitor. Battery: Internal Battery Duration Must Be: ≥ At Least 240 (built In Battery). Can Up-grade Lithium Battery Power Supply ≥480min. Ecg: 5 Leads Display Sensitivity: ×0.25, ×0.5, ×1, ×2, ×4, Auto Gain. Must Have A Smart Lead Off Feature, Must Have An Ecg Calibration Feature, Must Have An St Segment Analysis And Monitoring. Heart Rate Range Must Be: Adu: 15 To 300 Bpm, Ped/neo: 10 To 350 Bpm. Must Have Two (2) Hr Averaging Method. With Ecg Multi-lead Synchronous Analysis Function, Analysis Of Multiple Cardiac Leads At The Same Time, Can Be Accurately Monitored In The Case Of Individual Lead Interference, With Intelligent Lead Fall Monitoring Function. St-segment Analysis Can Show The St Graphic, Which Help Indicates The St Alarm Status More Faster. Nibp: Nibp Measurements Must Comply With The American. National Standard For Electronic Or Automated. Sphygmomanometers: - (ansi/aami/iso 81060-2:2009, Ansi/aami. Sp10:2002) In Relation To Mean Error And Standard Deviation. Measurement Mode： Manual，auto, Stat, And Sequence，sequence Mode Could Support 5 Different Modes. Maximum Measuring Interval In Auto Mode Must. Must Have A Dual Overpressure Protection For Nibp. Temperature: Must Have Dual-channel Body Temperature Monitoring With Difference Display Measurements. Must Support Skin Or Oral If More Than One Temperature Probe Is Used, The Monitor Will Be Capable Of Calculating And Displaying A Delta Reading. Measuring Range: 0～50 ℃. Spo2: Must Be Used In Low Pi (perfusion Index). Resp: Detection Method: Respiratory Rate And Respiratory Waveform Must Be Monitored By Pulse Wave. Ibp: Support 2-channel Ibp Measurement Range: -50mmhg～+350mmhg. Types Of Measuring Blood Vessels: Arterial Pressure (art), Pulmonary Artery Pressure (pa), Central Venous Pressure (cvp), Right Atrial Pressure (rap), Left Atrial Pressure (lap), Intracranial Pressure (icp); Pulmonary Artery Wedge Pressure (pawp); Cerebral Perfusion Pressure (cpp). The Monitor Will Calculate The Ppv Based On Any Arterial Pressure Value Between Heartbeats. Etco2: Measuring Range: Etco 2 0 To 150 Mmhg. Fico: 3 To 50 Mmhg. Awrr: 0 To 150 Rpm (mainstream). Trends: Trend Data For All Parameters In Tabular And Graphic Formats Must Be: 180h. Stored Nibp Measurements Must Be: Up To 2400 Groups. Stored Alarm Events Must Be: 3000 Groups And Associated Waveform. Holographic Waveform Must Be 72 Hours Printer/recorder: Must Support 3-channel Recorder To Realize Thermal Printing; Support Network Printing Function Network Capability: The Ip Address Of Each Patient Monitor Shall Be User Configurable. The Upper/lower Limits Of Alarms Can Be Configured Via Networking From The Central. The Alarms At Bedside Can Be Paused Or Muted Via Networking From The Central. Features: -the Monitor Must Provide Electronic Early Warning Scor （ews）, Glasgow Coma Scale (gcs ), And Oxycrg Screen. -oxycrg Screen Shows Two Trend Curves And A Compression Waveform, Support To Review 48 Hours Trend Curve And Compression Waveform On The Oxycrg Review Screen -accessories Storage Box, Help Manage Accessories And Prevent Accessories Missing Or Broken Problem -all-in-one Monitoring Adult, Children, And Newborn Patients. -user Shall Be Able To Freeze The Waveforms On The Screen And Then Review It To Carefully Observe The Patient During This Time. -up To 4 Timers Shall Be Able To Be Configured On Monitor Display To Count Up Or Down The Required Time In Minute And Second With Audio Alarm To Alert User. - The Monitor Shall Provide Following Specific Working Modes: Standby, Intubation, Night, Privacy, And Demo Modes. Warranty -1 Year From Delivery And Installation. Unit 2 500,000.00 12 Ceasarian Instrument Set. Brand New. Product Specifications: Made Of Heavy Duty Stainless Steel. Includes The Following Items: 1 Pc. Scalpel Handle #3 With Measure 125mm, 1 Pc. Scalpel Handle #4 135mm, 1 Pc. Tc Metzenbaum Scissors Cvd 180mm, 1 Pc. Lexer Scissors Narr Str 165mm, 1 Pc. Mayo-lexer Scissors Cvd 165mm, 1 Pc. Lister Bandage Scissors Hvy 180mm, 1 Pc. Standard Forceps Serr 160mm, 1 Pc. Standard Tissue Forceps 1x2 160mm, 5 Pcs. Lorna Towel Clamp Non-perf 130mm, 6 Pcs. Halsted-mosquito Forceps Delstr125mm, 6 Pcs. Halsted-mosquito Forceps Del Cvd125mm, 2 Pcs. Kelly Forceps Del Str 140mm, 6 Pcs Moynihan Hemostatic Forceps, Crv, 150mm, 1 Pc. Tc Mayo-hegar Ndlholderhvyserr150mm, 1 Pc. Tc Hegar Needle Holder Hvy-serr 205mm, 1 Pc. Us-army Retrac.26x15/43x15-23x15/40x15, 1 Pc. Richardson-eastman Bt471rbt472r, 6 Pcs. Boys-allis Forceps 5x6 155mm, 2 Pcs. Kidney Tray Stainless Steel 250mm, 1 Pc. Bottom For 3/4 Container Height:135 Mm, 1 Pc. Primeline Pro 3/4 Lid Red, 1 Pc. 3/4 Size Perf Basket 406x253x76mm, 1 Pc. Silicone Basket Liner 3/4 Size, 1 Pc.mayo Safety Pin F/ring-hdl Inst 140mm, 1 Pc. Ident. Label Up To 13 Letters Red. Warranty –at Least Eat 1 Year From Delivery. Set 2 1,520,000.00 13 Chemical Analyzer. Brand New. Product Specifications: Combined Instrument With Two Complementary Technologies: Raman Spectroscopy And Colorimetric Detection Confirmatory Testing: One Instrument Capable Of Confirmatory Testing Using Two Technologies Including 1) Swgdrug Category A Technique For Presumptive Testing, And 2) Swgdrug Category C Technique For Confirmatory Testing Safety Of Features For Measuring Energetic Samples: Trace Detection Testing For Energetics Without Need For Opening The Container Nor Inducing Laser Light To The Sample, Scan Delay Timer: 15 Sec – 10 Min Sample Size: Able To Detect / Identify Samples From 1 Microgram Traces To Large Bulk Samples Materials Covered: Common Raman Substances, Explosives, Narcotics, Cwas, Tics, Tims, Precursors, Common Chemicals, Fluorescent Materials Not Covered By 785nm Raman: E.g. Colored Materials, Heroin, Colored Mdma Pills, Oils, Npss, Etc., Low Concentration Materials Not Covered By Any Raman Instruments: Lsd, Thc, Magic Mushrooms, Gunpowder, Etc. Raman Excitation Wavelength: 1064nm Minimizes Fluorescence Effects: Allows For Direct Analysis Of Colored/impure Chemicals Through Colored Packaging. Spectral Wavelength Range 200 – 2500 Cm-1 Portability Power: Small Handheld Device, Optimized For One Handed Operation. , 18.5cm-20cm (l) X 15cm-20cm (w) X 7.9cm-10cm (h), 3.65lbs-5lbs (1.65 Kg-2.27kg)., Quantity 2 Lithium Ion Rechargeable Batteries With Battery Life Of More Than 6 Hours Per Charge Per Battery. Cr123a Rechargable Batteries Can Be Used. Including Spare 2 Lithium-ion Battery. Ruggedness Decontamination: Us Mil-std 810g Designed Rugged., Ip 68 Rated For Use In Varying Environmental Conditions And For Complete Decontamination. Operational Temperature Range: Unit Can Be Operated In -20°c To +50°c Temperatures., Withstands Temperature Fluctuations And Humidity Fluctuations. Rapid Start-up Rapid Results: 60 Seconds From Power On To Analysis., Analysis Results In Less Than One Minute. Operational Mode Options: Raman Analysis And Colorimetric Analysis Oraman: • Auto-collect Adjusts Raman Settings Automatically Optimizes Use For Routine Operations • Advanced User Adjustable Raman Settings For Advanced Operators And Custom Library Build: • Laser Power Level 30-490 Mw Adjustable In 5 Mw Increments Exposure Time 5ms To 30s In Increments • Custom Applications Optimize Raman Analysis Parameters Specific To Material Type Ocolorimetrics: • Pouches Including Both Swipes And Colorimetric Chemicals In One Pouch • Pouches For Explosives And Narcotics • General Pouches For Detecting A Wide Range Of Explosives Or Narcotics • Specific Pouches For One Explosive/narcotic Substance Or Substance Group Easy Raman Operation: • Scans In Direct Contact And Through Translucent Plastic Or Glass Containers. • Universal Sample Holder For Analysis Of Samples In Varying Forms And Packaging. • Smartphone Like Touch-screen Interface Or Large Button Activation. • User Prompted Step-by-step Onscreen Analysis Activation. • Typically, 4 Button Presses To Receive Analysis Result. • Onboard System Status Monitoring And Calibration. Reduces Down-time And Necessity For Re-calibration At A Service Depot Analytical Performance: • Liquids, Solids, Powders, Pastes, Gels, Invisible Traces. • Colored Substances And Substances Found In Colored Translucent Packaging. These Types Of Substances Are Most Often Encountered In Real-world Samples. • Comparative Spectral Analysis Overlay Easily Performed Onboard. • User Adjustable Focus Ensures Analysis Of Material And Not The Packaging. • 4c Software Automatically Monitors Results For Combinations Of Precursors Used In Threat, Drug Manufacturing, And Other Recipes. Users Receive Onscreen Alert To Potential Threat Or Clandestine Drug Manufacturing Activity. Library: Raman: • Over 12,000 Substances. • Resq Library Includes The Latest Explosives, Precursors, Cwas, Tics/tims, Narcotics And Psychotropic Drugs, Steroids, Cutting Agents, Pharmaceuticals, Diluents And Pesticides. • Easily Expandable To Add Emerging Threats And Other Substances. • Fleet Management And Library Transfer To Units In The Field. • 4c Library With Explosive, Drug Manufacturing And Other Types Of Threat Manufacturing Recipes. • Library Updates Provided More Than Once A Year Colorimetrics: • General Narcotics Pouches: Multi Drug Test Incl. Fentanyl, Special Opiate Pouch, Cannabinoids • General Explosives Pouches: Chlorates/perchlorates, General Explosives • Specific Pouches: Cocaine, Ephedrine, Heroin, Ketamine, Lsd, Meth/mdma, Mushrooms, Opiates, Pcp, Thc, Ghb Evidence Documentation Traceability: • Onboard 5mp Camera Captures Image Of Sample And Surroundings, As Well As Colorimetric Swab. • Image(s) Stored Along With Analysis Results In Tamper-resistant File. All Analysis Results Are Traceable And Include Unique Date, Time And Serial Number Stamp. • Ability To Activate Password Protect Operator Log-in. Record Of User Associated Activity Stored Onboard And Cannot Be Deleted. Data Access And Transfer Reporting: • View Results In Real Time On Cell Phone Or Tablet, Computer Or Laptop (pc, Ios, Android, Linux) Via Wifi (can Be Disabled). • Exportable Data In Numerous File Formats. • Data Access And Transfer On Computer Or Laptop Via Usb And Wifi (can Be Disabled). • Easy Report Generation. Customer Support Package: • 24/7/ 365 Days Reachback Service For The Life Of The Unit. • Library Updates Provided For The Life Of The Unit. • Software Updates Provided For The Life Of The Unit. • Support: Online, Phone, Email, And In Some Cases Text Message For The Life Of The Unit Cql Complete Package: • Rugged Shipping Case With Custom Foam Insert. • Qty 2 Rechargeable Lithium-ion Batteries. • Cr123a Battery Cartridge (does Not Include Cr123a Batteries). • External Battery Charger. • Ac Power Supply. • Adjustable Base Adaptor. • Universal Sample Holder. • Certified Benzonitrile Performance Verification And Calibration Standard. • Flash Drive Containing User Manual And Supporting Documentation. • Quick Start Guide. • Usb-c To Usb-a Data Transfer Cable. • 1064nm Laser Test Card. • Including Hand Strap And Wrist Strap. . Training: • Comprehensive Onsite Training For An Unlimited Number Of Users. Add-on Accessories And Software: • Periscope Adaptor. • Vial Holder. • Bottle Adaptor. • Integrated Quickdetect Automated Colorimetrics • Detect Trace Quantities Of Non-visible Residues Left On Surfaces: • Explosives And Explosive Precursors • Narcotics Standard Requirements: • Bidder’s Certificate That Will Provide Manual In English Language (2 Copies Of Operator's/user's Manual And 2 Copies Of Service/technical And Maintenance Manual) Upon Delivery. • Brochure/sales Literature. Training Requirements: • Bidder’s Certificate That Will Conduct Free Technical Training And Product Demo For The End-user/s And In-house Biomed On Equipment Operation And On Maintenance Of Equipment. • After Sales Service: Bidder’s Certificate That Parts Shall Be Available At The Authorized Philippine Service Center/s For A Period Of Five (5) Years After The Warranty Period. • Certification From Local Distributor On The Availability Of Service Technicians And/or Biomedical Engineers In Case Of Equipment Breakdown. Preventive Maintenance - • Bidder’s Certificate Free Quarterly Preventive Maintenance During The Warranty Period With Preventive Maintenance Plan. Warranty Certificate: • Warranty Certificate Minimum Of Five (5) Years For Service And Three (3) Years For Parts. The Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Testing And Commissioning. • Calibration: With Certificate Of Calibration Upon Delivery. The Bidder Must Be Iso 9001 And The Manufacturer Should Be Iso 13485 Certified Unit 1 6,900,000.00 14 Common Bile Duct Exploration Supplement Set. Brand New. Product Specifications: Made Of Heavy Duty Stainless Steel. Includes The Following Items: 1 Pc. Randall Kidney-stone Frcpsslt-cvd225mm, 1 Pc. Randall Kidney-stone Forceps Cvd225mm, 1 Pc. Randall Kidney-stone Frcpshvy-cvd225mm, 1 Pc. Randall Kidney-stone Frcps U-cvd225mm, 1 Pc. Bakes Bile-duct Dilator 1mm, Bakes Bile-duct Dilator 2mm, 1 Pc. Bakes Bile-duct Dilator 3mm, 1 Pc. Bakes Bile-duct Dilator 4mm, 1 Pc. Bakes Bile-duct Dilator 5mm, 1 Pc. Bakes Bile-duct Dilator 6mm, 1 Pc. Bakes Bile-duct Dilator 7mm, 1 Pc. Bakes Bile-duct Dilator 8mm, 1 Pc. Bakes Bile-duct Dilator 9mm, 1 Pc. Bakes Bile-duct Dilator 1mm, 1 Pc. Randall Kidney-stone Forcepscvd190mm, 1 Pc. Randall Kidney-stone Fcpshvy-cvd190mm, 1 Pc. Bottom For 1/2 Container Height:135mm, 1 Pc. Prime Line Pro 1/2 Lid Green, 1 Pc. 1/2 Size Perf Basket 243x253x76mm, 1 Pc. Identification Label Green. Set 1 590,000.00 15 Defibrillator. Brand New. Product Specifications: General Features: 7-10 Inch Lcd Display, Maximum Of 3 Waveforms. High Contrast Display Mode For Bright Environments. Ambulance-ready, Rugged Casting: Ip44, Impact Test Of 0.75m. Output Energy: 1-360j. Charge Times Of <3s T O200j, <7s To 360j. Auto-volt With Smart Charging. Lithium-ion Battery Supports To 6 Hours Monitoring/200 Shocks @360j/ 4.5 Hours Pacing, With Built-in Led Power Level Indicator. Lightweight At 4-5kg., Full Configuration, Main Unit. Automatically Switch Defibrillator Energy, Cpr Prompts, And Alarm Limits Depending On Patient Type. Display Ecg During Aed Mode. Ecg Recovery Within 2.5s Or Less. Contact Status Can Be Checked Through Paddle And Monitor, Impedance Value Can Be Checked In Monitor. Auto-testing Includes Maximum Energy Discharge Test. Parameters: 3/5 Lead Ecg, Pacer. Includes: Thermal Recorder, External Paddle Kits, Ecg Cable And Lead Wires, Ecg Electrode, Multifunction Electrode Pad. Printer Paper, Electrode Gel, Power Cord, Lithium-ion Battery. Unit 5 1,500,000.00 16 Dish Sterilizer. Brand New. Product Specifications: − High Light Led Display, − With Special Boiler Temperature Drainage Settings, − Washing (non-recycling) Parameters Can Be Set Free And With Control Memory Function, − Can Meet Different Washing Demand, − Self - Research Internal Water Softener, − Double Construction Design For Top Cover, − Power: 380v/50hz, − Basket Dimension : 500x500mm, − Washing Ability : At Least 60 Basket / H, − Rinse Water Quantity : 3 L/h, − Inlet Height :400-430mm, − Machine Dimension : 800-850x800-820x1450-1500mm, − Rated Power : 14.75kw, − Gross Weight : 140-150, − Net Weight : 100-110, − Packing Size : 890-900x900-910x1630-1700mm. Warranty Period- Within 1 Year Upon Delivery And Installation To Cover Parts (excluding Wearable Parts) And Service With Preventive Maintenance Every 6 Months Within 2 Years Period. Provides Orientation And Training To End-user Representative.* Unit 1 500,000.00 17 Electrocardiography Machine (ecg) Brand New. Product Specifications. High Resolution Lcd Touch Screen, 320-330x240-250vivid Waveform Display. 12 Leads Ecg Resolution Thermal Printer. Built-in Rechargeable Li-ion Battery, Ac/dc Power Supply. Anti-defibrillator And Pace Maker Detection. Complete Digital Filtering, Resisting Baseline Drift, Automatic Baseline Adjustment. Automatic Ecg Measurement And Interpretation. Large Patient Data Storage; 150 Cases, Equipped With Usb Port For Data Transfer. Three (30 Printing Formats (auto, Manual And Rhythm) Selectable. 1/2/3 Channel Ecg Waveform And Rhythm Leads Record Out. Lead Status Diagram Display. Unit 4 200,000.00 18 Electrosurgical Dessicator Machine. Brand New. Product Specifications: Use For Removal Of Lesions, Warts, Skin Tags, And Other Blemishes Easily With Minimally-invasive Treatment. For Superficial Treatments, Safe To Use Around The Eye And Nose Area. Includes Re-usable Pen And Tips. Unit Specifications: Depth:4-5 Inches, Width:8-9 Inches, Height:7-8 Inches, Weight:6-8 Pounds, Output Power -low At 0-20watts (1/10 Watt Increments Up To 10 Watts), High At 0-35 Watts, Bipolar: 0-35 Watts. Offers Hand-or-foot Activated Operation. Autoclavable, Reusable Hand Control Pencil With Power Adjustment Buttons. Pencils Are Designed With Non-spinning Hex Collar For Multi-positional Fall-safe Blade Locking. Equipped With Mobile Stand. Includes Consumables.warranty-6 Months From Delivery And Installation. Set 1 100,000.00 19 Fetal Maternal Monitoring System: Brand New. Product Specifications: Foldable Screen. Probe Rack And Wall Mounting Rack. Handle For Easy Carrying. User-friendly Gui With 3 Display Modes. Four (4) Optional Color Background. Capable Of 24 Hours Ctg Storage. Fast Print For Store Traces. "smart Notes" Annotation. Signals Overlap Verification. Real-time And Offline Data Transmission To Pc. 10-12 Inch Color Touch Screen. Excellent Algorithm. 12-crystal And 1 Mhz Water-proof Transducer For Accurate Detection. Configuration: Dual-fhr, Toco, Fm, Afm, Mecg, Nibp, Mspo2, Temp. Includes: 3 Each Belt, 1 Each Event Marker, 1 Bottle Ultrasound Gel, 1 Ea. Fhr Transducer, Purple, 1 Each Transducer, Yellow, 1 Each Spo2 Sensor, Adult, 1 Each Temperature Probe, Skin, 1 Each Toco Probe, 1 Each Nibp Cuff, Adult, 1 Each Nibp Tube, Adult. Unit 3 1,110,000.00 20 Infusion Pump. Brand New. Product Specifications: Mechanism: Peristaltic Pump, Operating Mode: Flow Rate Mode, Drip Rate Mode(optional), Preset Volume: 1-9999 Ml, Flow Rate Range: 1 – 600 Ml/h, Increment: 1, 10, 100 (ml/h), Accuracy: ± 5%, Kvo Rate: 1 Ml/h, Bolus Rate: 600 Ml/h, Drop Rate Range: 1 – 400 Drop/min With Optional Drip Sensor, Screen: 2.7 Inches B/w Lcd, Information: Flow Rate, Preset Volume, Accumulated Infusion Volume, Completion, Occlusion, Air Bubble, Bed No, Ac Power Indicator, Battery Capacity, Battery Charge Indicator, Iv Set, Etc., Status Indicator: Stop, Run, Bolus, Kvo, Alarm Type: Air Bubble, Finish, Occlusion, No Ac Power, Low Battery, Battery Empty, Reminder To Operate, Communication Error (err1), Operation Error (err2), Drops Error (err3), Handle Open (err4), Air Bubble Level: 1-3 Levels Adjustable, Universal Compatibility, Turn On/off, Occlusion Alarm Pressure Range: 3 Levels: 60kpa, 100kpa, 140kpa (±20kpa), Battery Type: Lithium Polymer, Battery Life: Up To 4 Hours Continuous Operation 25 Ml/h Flow Rate, With Delivery And Installation, Provision Of Trainings Of Staff With Certificates, And Manual. Unit 4 320,000.00 21 Laboratory Oven. Brand New. Product Specifications: Working Temperature Range At Least 5 Above Ambient Temperature To +300 °c; Setting Accuracy Temperature Up To 99.9 °c: 0.1 / From 100 °c: 0.5; Setting Temperature Range +20 To +300°c; Temperature Sensor 1 Pt100 Sensor Din Class A In 4-wire-circuit. Control Cockpit Single Display. Adaptive Multifunctional Digital Pid-microprocessor Controller With High-definition Tft-colour Display; Timer Digital Backwards Counter With Target Time Setting, Adjustable From 1 Minute To 99 Days; Adjustable Parameters: Temperature (celsius Or Fahrenheit), Air Flap Position, Programme Time; Ventilation: Natural Convection, Vent Connection With Restrictor Flap; Works Calibration Certificate : Calibration At +160°c; Door Fully Insulated Stainless Steel Door With 2-point Locking (compression Door Lock); Internals 1 Stainless Steel Grid(s), Electro Polished; Stainless Steel Interior; Interior Easy-to-clean Interior, Made Of Stainless Steel, Reinforced By Deep Drawn Ribbing With Integrated And Protected Large-area Heating On Four Sides; Volume 32 L; Dimensions W(a) X H(b) X D(c): 400 X 320 X 250 Mm; Max. Number Of Internals: 3; Max. Loading Of Chamber 60 Kg; Max. Loading Per Internal 20 Kg; With Free Power Back-up System, With Free Installation And Demonstration. Unit 1 130,000.00 22 Newborn Hearing Screening Test Equipment. Brand New. Product Specifications: • Capable Of Screening And Diagnostic Testing With Te And / Or Dpoae. • Fast Automatic Test With Pass / Refer And Graphical Test Result Display. • Direct Evaluation Via Value And Bar Diagram. • Up To 12 Frequencies Displayed Within The Device, Dp Up To 12 Khz. • 5 Dp / 2 Te Protocols With User Customizable Parameters (diagnostic Version). • High Noise Immunity For Operation In Normal Clinical Environment. • Lightweight, Small Ear Probe. • Environmentally Friendly Due To Long Life, Rechargeable Battery. • Bluetooth Communication To Optional Printer And Pc • Evaluation Of Results In Pc. Screener With At Least 4 Frequency Dpoae Testing Protocols. • Qualified Protocols Built Into The Device. • 4 Dpoae Test Frequencies Reported. • Integration To State Tracking Systems, Hi-track Or Oz. Diagnostic With Up To 12 Frequency Dpoae Testing Protocols. • 1.5 To 12 Khz Frequency Range With Up To 12 Test Frequencies Reported. • Customizable Test Protocols Teoae Available As An Upgradeable Option. Measurement Type: Distortion Product Otoacoustic Emissions (dpoae) Transient Evoked Otoacoustic Emissions (teoae). Frequency Range: Screener Version: Dpoae: 2.0 Khz To 5.0 Khz Teoae: 1.5 Khz To 4.0 Khz. Diagnostic Version: Dpoae: 1.5 Khz To 12.0 Khz Teoae: 0.7 Khz To 4.0 Khz. Stimulus Intensity Range: Dpoae: 40 Db Spl To 70 Db Spl Teoae: 83 Db Spl Peak Equivalent (±3 Db). Microphone System Noise: -20 Db Spl @ 2 Khz (1 Hz Bandwidth)/ -13 Db Spl @ 1 Khz (1 Hz Bandwidth). Dimensions And Weight (unit): 2.5 To 3” W X 1.2 To 1.8” D X 5.5 To 6.5” H 6.2 To 6.8 Oz. Power Supply: Lithium-ion Rechargeable. Battery Life: 1000 Tests Per Charge, Minimum 15 Hours On-time. Connectors/ Communications: Integrated Usb Communication Capability For Battery Charging And Communication With Pc-based Database Programs Or An Optional Printer. Hdmi Connector For Connection To The Micro-probe. Integrated Bluetooth Class 2 + Edr With Spp. Protocol For Communication With Optional Printer. Standard Accessories: Micro-probe, Box Of Single Use Ear Tip And Ear Tip Remover, Package Of Probe Tubes, Micro-usb Power Supply For Charging Lithium Ion-battery, Pc Database Software With Manual, Micro B To A Usb Cable For Pc Communicator/charging, Protective Carrying Case, Data Management Tool That Provides The Ability To Transfer Patient. Oae Test Data From The Testing Device To A Pc For The Purposes Of Viewing, Archiving, Managing And Printing Oae Reports. Using The Database Also Gives You The Means To Create Letter Sized, Detailed Reports That Can Be Easily Filed Or Faxed. You Can Also Create A “paperless” Office By Saving The Test Results As A Pdf For Electronic Filing Or Email. Dpoae: 40 Db Spl To 70 Db Spl Teoae: 83 Db Spl Peak Equivalent (±3 Db). Includes Ups. Warranty –at Least 1 Year After Delivery And Installation. Unit 1 1,000,000.00 23 Operating Room Lights. Brand New. Product Specifications: Dual Head- Ceiling Type. Major Operating Room Light Multi-color. Merging Of Light Fields, Light Intensity Control. Comfortable Display Of Key-pad On Major Lighting Head. Back Light Key Pad Display. Depth And Merging Light Field Should Be Operated At The Sterilizable Handle. Cool Light Temperature Increasing In Head Area: 0.5 ºc. 360° Continuous Rotation Around All Major Joints. Anti-bacterial Coating Head. - Light Head Diameter: 66cm. Ideal Laminar Flow Ceiling System. With Endo Mode: Must Be Color Green Light. Main Light Head. Electronic Light Intensity Control At Lamp Head. - Light Intensity At 1 Meter Distance: 160,000 Lux. Colour Rendering Index Ra At Kelvin: 98 (for Better Quality Image Of Skin, Blood And Tissues). Colour Rendering Index R9 At Kelvin: 99 (for Better Quality Image Of Skin, Blood And Tissues). Focusable Light Field Size: 19-30 Cm. Colour Temperature: 3,750, 4,000, 4,250, 4,500, 4,750 K. - Adjusting The Shadow Activating Via The Touch Panel. - Maximum Of Four Groups Of Lenses Are Dimmed Simultaneously. Shadow Management System. Number Of Led’s: 99 On Lamp Head. Life Span Of Leds: > 60,000 H. Working Distance: 70-160 Cm. Light Intensity Control (standard): 5% - 100%. Outstanding Depth Illumination: 70, 100, 130 Cm. Laser Pointer On Head (main Light Head Only). Lf-index Leenemann: 26. Lf-index Oostlander: 28. Input Voltage: Single Phase 110 ~ 230 Vac Free Volt. Total Power Consumption: 82 - 92watts. Adjustable Brakes At The Horizontal Arm. Light Head Weights: 18.5 Kg. Protection Type Lamp Head: Iec60529. - Aluminum Housing. Satellite Head. Electronic Light Intensity Control At Lamp Head. - Light Intensity At 1 Meter Distance: 140,000 Lux. Colour Rendering Index Ra At Kelvin: 98 (for Better Quality Image Of Skin, Blood And Tissues). Colour Rendering Index R9 At Kelvin: 99 (for Better Quality Image Of Skin, Blood And Tissues). Focusable Light Field Size: 18-30 Cm. Colour Temperature: 3,750, 4,000, 4,250, 4,500, 4,750 K. Number Of Led’s: 69 On Lamp Head. Life Span Of Leds: > 60,000 H. Working Distance: 70-160 Cm. Light Intensity Control (standard): 5% - 100%. Outstanding Depth Illumination: 70, 100, 130 Cm. Input Voltage: Single Phase 110 ~ 230 Vac Free Volt. Total Power Consumption: 82-92 Watts. Adjustable Brakes At The Horizontal Arm. Light Head Weights: 17.9 Kg Minimum. - Aluminum Housing. Protection Type Lamp Head: Iec60529. Standard Accessories: - Sterilized Handle: 2 Pcs/ Lamp Head, - Ceiling Anchorage Ring With Screws, - Spring Arm, - Ceiling Cover, Including Installation Of Brackets To Embed Overhead Ceiling- User Manual, - Ups. Warranty Of Two (2) Years For Parts And Labor With Free Preventive Maintenance Every Quarter Within Warranty Period Five (5) Years Warranty For Led Bulb Only. Unit 1 2,500,000.00 24 Operating Room Table (motorized). Brand New. Product Specifications: Total Length: 2000-2100 Mm. Width Including Side Rails: 600-630 Mm. Mattress Width: 550-570 Mm. Total Weight: 200-210 Kg. Safe Working Load (swl): Up To 250 Kg. Height Adjustment Range: From 595 Up To 1005 Mm. Castors: Four Ø 120-125 Mm Central Locking Twin Castors. Head Section: -58° ... +37°, 135 Mm. Back Section: -10° ... +70°. Leg Section: -80° ... +10°. Lateral Tilt: 20° / 20°. Trendelenburg/anti-trendelenburg: 30° / 20°. Sliding Tabletop For C-arm Function: 300-320 Mm. Flex / Reflex: 220° / 120°. Electrical System: 24 Vdc, Battery Operated, 100 - 240 Vac, 50/60 Hz. Controls: Hand Control And Integrated Control Panel On The Column. Memory Positions: Four Programmable Positions. Visco-elastic Mattresses. Radio Lucent Tabletop For X-ray. Accessories For General Surgery: 1. Arm Rest, 2. Anesthesia Frame With Clamp And, 3. Attachment Clamp. Transport And Storage Conditions: Temperature 7 10° C + 50° C. Relative Humidity 10 %, 85 %. Air Pressure 700 Hpa, 1060 Hpa. Operating Condition: Temperature +10° C, + 40° C. Relative Humidity 30 %, 75 %. Air Pressure 700 Hpa 1060 Hpa. Side Rail Accessories: 25 X 10mm. Warranty-1 Year From Delivery And Installation. Certificate Of Parts Available In The Next 5 Years. Includes Training To End-user. Includes Product Manual. Unit 2 5,500,000.00 25 Radiant Warmer With Phototherapy Units. Brand New. Product Specifications: Fixed Height Radiant Warmer, Mounted On A Column. The Unit Is Supported By A T-shaped Sturdy And Stable Wheeled Base. Bases Is Provided With A Minimum Three (3) Anti-static Swivel Casters. At Least Two (2) Of The Casters Are Equipped With Brakes. The Base Is Equipped With A Side Handle/rail For Easy Positioning. The Design Of The Base Is Suitable To Be Fitted Over Standard Cradles, Cribs, And Bassinets. Overhead Radiant Heater At A Fixed Height Of 1.80-2.0m. Radiant Heating Is Achieved By Quartz/ceramic Elements, Placed In A Parabolic Reflector. The Radiator Is Equipped With A Safety Grid. The Unit Support Three (3) Modes: Pre-heating, Manual And Servo Mode. The Unit Allows For Instant Switching Been The Different Operating Modes. The Minimum Skin Temperature Setting Range Is 32°c To 37°c. The Resolution Of The Temperature Is: ± 0.5°c Or Better. In Manual And Pre-heating Modes Heating Settings Allow For A Range Of 0 – 100%. Led Spotlight(s) For Examination Are Integrated In The Overhead Radiant Heater, The Angle Of The Overhead Light Is Adjustable. Warm-up Time < 30 Min To 25°c. Power Requirements: 1 Ph, 100 - 240 Volts - 50/60 Hz 900 To 1300va (with Ups And Avr). Display Features: The Display Panel Is Integrated In The Column For Visualizing Working Parameters And Alarms. The Display Indicates: - The Current Active Mode: Pre-heating, Manual Or Servo, - The Current Heating Power In Percentages, - The Current Pre-set Temperature, - The Current Actual Skin Temperature, - The Current Air Temperature. The Unit Is Equipped With A Self-check Feature. Alarm And Safety Features: Alarms Are Audible And Visible. Alarms Indicating: - Sensor Disconnection Or Malfunction. - Power Failure. - Skin Temperature, After Stabilizing, Varying Beyond 0.5° To 1°c From Set-point. - 10 To 15 Minutes After Manual Mode Has Been Engaged An Audible Alarm Will Sound. In Addition, The Unit Will Either Reduce Or Cut The Power To The Heater. In Skin Mode, When The Temperature Exceeds 39°c, The Unit Will Cut The Power To The Heater. Supplied With: Instructions For Assembly, Use And Maintenance In English: 1 X Installed And 2 X Spare Reusable Skin Temperature Sensors, Including Connection Cable And Plug. 1 X Spare Quartz/ceramic Heating Element Or The Same With Installed Heating Element. 2 X Spare Examination Light Bulbs. 1 X Set Of Spare Fuses, If Applicable. Accessories: A Durable Light Weight Cradle/crib And Mattress. Oxygen Regulator Including A Pressure Gauge, Flow Meter, Humidifier Bottle And All Required Tubing. Integrated Weighing Scale. Electrically Operated, Slow Suction Unit Including A Vacuum Regulator, Vacuum Gauge And Autoclavable Collection Jar. Electrical Height Adjustment. T-piece Resuscitator. Integrated Phototherapy Unit. Led Phototherapy Unit 36cm: 620-2800μw/c㎡. Led Phototherapy Unit 50cm: 400-1620μw/c㎡. Estimated Life Span: Eight Years. Includes Avr. Unit 3 600,000.00 26 Refrigerator (biological). Brand New. Product Specifications: External Dimension: W = 700-750 Mm D = 730-750 Mm H = 2000-2100 Mm. Inside Dimension: Useful Space On Top W = 600-620 Mm D = 550-570 Mm H = 500-550 Mm. Useful Space At The Bottom W = 590-610 Mm D = 540-560 Mm H = 500-550 Mm. Capacity: 600 L Temperature Range: Top 2°c To 20°c Bottom 2°c To 20°c. Optional: Other Temperature Ranges. Housing Galvanized Sheet Steel With High Quality White Coating, Antibacterial Coated. With 4 Feet, Height Adjustable. Optional: Set Of 4 Casters, 2 With Brakes. Interior Space Inner Case Of Galvanized Sheet Steel With High Quality White Coating, Antibacterial Coated. Cleaning Friendly By Rounded Corners, Slippery Surface In The Interior, Meets Highest Hygiene Requirements Insulation High Density Foamed-in-place Polyurethane, With A Thickness Of 60 Mm. Cfc-free. Circulation Air Cooling For Rapid And Uniform Temperature Control, Reducing Temperature Gradients To A Minimum. When The Door Is ""open"" The Circulating Fan Is Switched Off Automatically By A Micro Switch In Order To Prevent Warmer Ambient Air Being Drawn In. Door 2 Pcs. Three-layer Thermally Insulating Glass Door (arranged On Above The Other), Supplied As Standard With Right Hand Hinge, Also Available With Left Hand Hinge At No Extra Cost. Grease Resistant Magnetic Seal. Optional: With Door Lock. Interior Fittings 4 Pcs. Grating-type Shelves (dim.: 530x550 Mm), White Coated. Interior Lighting With Automatic On/off Micro Switch. Optional: Stainless Steel Shelves Or Stainless-steel Drawer Compartments, With 3 Lengthwise Dividers With Telescopic-type Guides On Rollers With Stops, Drawer Dimensions: 500x480x77 Mm (wxdxh) Usable With Between The Lengthwise Dividers: 106 Mm (lengthwise Dividers Easily Removable). Working Range 1 From 2°c To 20°c (assuming The Ambient Temperature Is Approximately 4°c Above The Set Point). Temperature Accuracy +/- 1,8°c After Stabilization (with 50% Of Loading). Acoustics Signal When The Set Value Is Undercut Or Exceeded Potential-free Connection Socket For Extern Alarm Refrigerating Unit 2 Pcs. Fully Hermetically Sealed, Forced Ventilation, Fitted On Vibration – Absorbing Mounts (ambient Temperature Max. 32°c), Low Noise (48dba/1m), Energy Saving Compressor With High Quality Vaporization System. Refrigerant: R 290 Or Equivalent Defrost Automatically With Thermal And Time Limit. Condensate Evaporation In Heated Tray. During The Defrost Period, The Temperature Inside The Cabinet (only The Air Temperature – Not The Stored Goods) Will Arise For A Short Time. Electrical Date: Power Supply220-230 V/50 Hz/single Phase Optional: 60 Hz. Power Input 2x 0,20 Kw. Fuse 16a. Power Cable: 2x 1,5 M. Packing Details (palletized) Dimensions: Approx. 85x98x224 Cm. Net Weight: 150-170 Kg. Gross Weight: 180-200 Kg. Include Avr. Unit 1 100,000.00 27 Rigid Video Procto-sigmoidoscope. Brand New. Product Specifications: Plastic Obturator. Video Camera. Stainless Steel Tube. Handle Of Polyacetal (delrin), Usb Male Connector. Analogue To Digital Converter Nozzle For Gas. Instrumentation Channel. Silicone Washer. Includes Universal Fiber Optic Light Source Machine And Tube Connector From The Proctoscope To The Light Source Machine. Warranty -6 Months From Delivery And Installation. Set 1 50,000.00 28 Stretcher, Transport Type. Brand New. Product Specifications: Hydraulic Stretcher. Numbers Of Function: Five-function. Certification: Ce, Fda, Iso13485. Size: 2000-2100 Mm (l)*770-800mm (w)*600-610/900-920mm (h). Height:600mm-930mm. Lowest Position-floor To Platform-580mm. Highest Position-floor To Platform-905mm. Side Rail Height Above Mattress Platform-340 To 360mm. Maximum Back Rest-0-80 Degrees. Maximum Knee Rest-0-30 Degrees. Maximum Trendelenburg Reverse Tr-0-16 Degrees. Mattress Size -1850-1880 X 650-670 X 80-90mm. Loading Capacity -up To 200 Kg. Side Rails: Collapsible Aluminum Alloy Side Rails. Bed Platform: X-ray Transparent. Specification: Ce, Fda, Iso. Other Features: 1. Central Brake System: Equipped With Four Brake Pedals On All Sides Of The Bed Make The Brakes At The Optimal Position Effectively. 2. Multi-function Instrument Support: The Instrument Support Can Put The Monitor And Can Also Be Used As A Headboard To Prevent Accidental Slippage Of The Patient. 3. Push Handle: Reducing The Workload And Preventing The Injuries. 4. High Quality Mattress: The European Standard Waterproof Cloth With The Smooth Surface Of The Mattress, Easy To Clean And Not Misplaced. 5. Large Diameter Wheel: Using The Imported 8-inch Silent Caster Make It Flexible And Durable. 6. The Fifth Wheel: The Fifth Wheel Can Provide A Smaller Radius Of Gyration. The Telescopic Collapse Design Can Slide Smoothly Even On The Rough Surface Or Obstacles Such As The Elevator Sill, Reducing Effectively The Damage Caused By Transport To Patients. 7. Plastic Coated Side Rails: The Side Rails With Stainless Steel Column Guardrail Covers Almost Entire Length Of Bed. 8. High-strength Carbon Steel Structure And Spray Procedure: The High Quality Carbon Steel And Robot Welding Guarantee The Mechanical Strength. The Spray Surface Treatment Is Easy To Clean And Guarantees A Longer Life. 9. Rapid Lifting Hydraulics: The Imported Dual-pressure Lifting System Can Be Used To Quickly Lift The Bed Or The Push Handle For 2 Seconds In An Emergency, And The Bed Will Automatically Locate The Height To Form A Special Body Position Of The Patient. 10. X-ray Imaging: Equipped With X-ray Material Bed Surface And X Ray Cassette Holder, The Whole Body Can Be X-rayed. 11. With Oxygen Cylinder Holder. Warranty -1 Year From Delivery And Installation. Unit 18 5,400,000.00 29 Suction Machine. (heavy Duty). Brand New. Product Specifications: Floor, Standing Type. Oil-less Piston Suction Motor. Double Anti-overflow Protection (mechanical Float And Electronic Sensor). Flow Rate: 40-50 Liter Per Minute. Water Displacement. Vacuum -700-800mmhg. Includes 2x3 Liters Polycarbonate Collection Jar. Attach/detach Abs Plastic Cover Jar. Anti-bacterial And Hydrophobic Filter. Patented Anti-vibration System. Dimensions: 300-400mm X 380-420mm X 800-850mm (lxwxh). Weight -15-25 Kg. Equipped With Foot Switch. Power -250w. Power Requirement -ac 200, 50-60hz. Silicone Hose. Operation And Service Manual Included. Warranty Of 6 Months From Delivery And Installation. Includes Orientation And Training Of End-user Staff. Unit 2 600,000.00 30 Syringe Pump. Brand New. Product Specifications: With Delivery And Installation, Provision Of Trainings Of Staff With Certificates, And Manual.  Applicable Syringes (universal Compatibility To Various Brands): 10ml, 20ml, 30ml, 50ml/60ml, Accuracy: ±2% (mechanical ±1%).  Flow Rate: 10ml: 0.1 Ml/h -300ml/h, 20ml: 0.1 Ml/h -600ml/h, 30ml: 0.1 Ml/h -900ml/h, 50ml: 0.1 Ml/h -1500ml/h.  Bolus Rate: 10ml: 100-300ml/h (default 300ml), 20ml: 100-600ml/h (default 600ml), 30ml: 100-900ml/h (default 900ml), 50ml: 100-1500ml/h (default 1500ml).  Purge Rate: 10ml: 300ml, 20ml: 600ml, 30ml: 900ml, 50 Ml: 1500ml.  Volume To Be Infused: 0.1ml~1000ml.  Injection Increment: 0.1ml.  Infusion Mode: Rate Mode, Time Mode.  Time Mode: Volume Limit: 0.1~999.9ml. Pre-set Time: 1min To 99h99min. Remaining Time: **h **min.  Occlusion Pressure: 3 Adjustable Occlusion Pressure Settings: Low, Middle And High.  Alarm Function: Infusion Completion, Near Completion, Empty, Occlusion, Low Battery, Syringe Disengaged, Incorrect Installation Of Syringe Plunger, No Ac Power Supply, Low Battery, Battery Exhausted, Malfunction Etc.  Battery: Rechargeable Lithium Polymer Battery, 7.4v, 2100mah, Can Operate For More Than 3 Hours After Fully Charged At 25ml/h. Unit 5 300,000.00 Total 34,665,000.00 Note: Winning Bidder Shall Conduct Product Demonstration/end-user’s Training Of The Actual Unit And Issue Training Certificate To The End-user And Medical Equipment Technician Of Wvsgh. The Bidder’s Single Largest Completed Contract Similar To The Contract To Be Bid Should Have Been Completed Within 3 Years From The Date Of The Deadline Of Submission And Receipt Of Bids, Award For This Contract Should Have Been Awarded By A Hospital Or Health Facility And Not By Another Supplier, Except For Line Items With Asterisk (*) Which Have Been Awarded By A Non-health Facility. Likewise, The Contract Price Of The Slcc Should Be At Least 50% Of The Sum Of The Abc Of The Line Items Joined. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184. The Complete Schedule Of Activities Is As Follows: Bac Activities Schedule Availability Of Bidding Documents December 12, 2024 At 8:00 Am To 4:00 Pm And Up To Before 9:00 Am Of January 7, 2025, At The Procurement/bac Office, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Pre Bid Conference December 20, 2024 (thursday), 9:00 Am At The 3rd Floor, Im Conference Room, New Building, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Opening Of Bids January 7, 2025 (tuesday), 9:00 Am At The 3rd Floor, Im Conference Room, New Building, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Bid Documents May Be Acquired By Interested Bidders On The Dates And Address Above And Upon Payment Of Applicable Fee For The Bidding Documents In The Amount Of: Php 25,000.00 Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bac/procurement Office On Or Before 9:00 Am Of January 7, 2025. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Wvs.doh.gov.ph , Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Western Visayas Sanitarium And General Hospital Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Mr. Jasond Rex A. Huyaban/jessie H. Jarbadan Bac Secretariat Western Visayas Sanitarium And General Hospital Sta. Barbara, Iloilo Tel. No.: (033) 332-4778 Loc. 119 Email: Wvsbac.procurement@gmail.com Website: Wvs.doh.gov.ph Renia Grace G. Salapare, Md, Fpafp, Mpa Bac Chairperson

Details: Description Invitation To Bid For Supply, Delivery And Installation Of Various Hospital Equipment Ib No. 2025-01-01-g The Western Visayas Sanitarium, Through Its Bids And Awards Committee (bac), Invites Suppliers/manufacturers/distributors To Apply For Eligibility And To Bid For The Hereunder Project: Name Of Project : Supply, Delivery And Installation Of Various Hospital Equipment Location : Western Visayas Sanitarium And General Hospital, Inangayan, Santa Barbara, Iloilo Approved Budget For : Php 34,665,000.00 The Contract (abc) Fund Source : Caf No. 2025-001-gf Delivery Period : Within Ninety (90) Working Days After Receipt Of The Notice To Proceed Line Items Abc: Php 34,665,000.00 Lot 1 No. Description Unit Of Measure Quantity Approved Budget Cost (php) 1 Electrical Machine. Brand New. Product Specifications: Combination Of Electrotherapy And Ultrasound; With 3 Independent Channels And Body Diagram Installed; Power Supply: Ac 100- 240 V, Number Of Channels: 3 Independent (2 For Electrotherapy, 1 For Ultrasound) Electrotherapy; Ten& Ems, Ultrasound Functions; Electrode Pads For Tens & Ems; Us Probe Head: Large And Small. Warranty -1 Year From Delivery And Installation. Unit 1 290,000.00 2 Hand Dynanometer. Brand New. Product Specifications: Hydraulic Adjustable Handle. Strength Can Be Viewed In Pounds Or Kilogram. Can Measure Up To 90kg (200lbs.). Durable Metal Gauge. Warranty –at Least 6 Months Upon Delivery And Installation. Unit 1 55,000.00 3 Parallel Bars. Brand New. Product Specifications: Adjustable And Foldable. Stainless Steel Bars And Steel Base. Height Adjust Within 26''-40''. Width -24''-36". Length Ranges: 7-10 Feet. Warranty -at Least 6 Months Upon Delivery And Installation Unit 1 50,000.00 4 Pulley System. Brand New. Product Specifications: Single Handle/dual Tower. Chest And Floor Height Mounted Handle. Easily Adjustable Handles. Wheelchair Accessible. Warranty –at Least 1 Year Upon Delivery And Installation. Unit 1 150,000.00 5 Pbx, Smart Hybrid. Brand New. Product Specifications: Designed For Telemedicine Use. Genuine And High Quality Brand. Pabx Built-in Extensions 16 Analog. At Least 2 Card Slots And 2 Slots Trunk Extension Card Switch System. Ability To Equip Sub-frame Ns-320; 12-32 Trunk Extensions. Sub-frame To Extend Pbx Ns300. Port Connected To The Main Frame. Dimensions: 40-45 X 35-36 X 86-90 Cms. Warranty –at Least 6 Months From Delivery And Installation * Unit 1 100,000.00 6 Uninterrupted Power Supply. Brand New. Products Specifications: Designed For Telemedicine Operation. 3000va. Output Power Capacity-3000va, Mount: 3u Rack Mountable. Nominal Output Voltage -230v. Dimensions: 20-22 X 19-20 X 5-6 Inches. Warranty –at Least 6 Months Upon Delivery And Installation. * Unit 1 400,000.00 7 Medical Waste Shredder. Brand New. Product Specifications: 20hp Motor Slow-speed And High Torque Dual Shaft Shredders, 5/16″ Wide Cutters, With Bearing Protection And Cleaning Fitters. Features: Efficiently Shred Syringes, Face Masks, Boxed Medical Waste, Pill Bottles, Etc., Available With A Split Cutting Chamber That Allows For Two Different Shred Widths Within One Shredder, The Manner Of In Feed And Output Are Also Divided. Includes Training And Certification, Warranty 1 Year Upon Installation Unit 1 350,000.00 8 Portable Multi-parameter Analyzer Flow Water Quality Testing. Brand New. Product Specifications: Measures Water Quality Parameter For Ph/ec/ise/do/temp. Mv/orp/px/resistivity/tds/sal./do Saturation. Features: Portable Device, Color High Contrast Lcd Touchscreen, Data Storage1000 Sets For Each Parameter, Support For Usb Communication, Ip65 Waterproof, Includes All Necessary Accessories And Consumables, Includes Training And Certification For Use, Warranty For 1 Year Upon Installation Unit 1 200,000.00 9 Water Purification System. Brand New. Product Specifications: 6000 Gdp Reverse Osmosis Machine. Up To 1200 Containers Per Day. Double U.s. Membrane. 2 Tanks 1000ltrs. For Raw & Product Water. At Least 28 Stages Of Water Filtration. To Include Piping Line From Water Station To Specified Areas Within The Health Facility. To Include Necessary. Building/structure For The Water Station. Service Warranty 1 Year After Delivery And Installation. To Include Service And User Training. Including Consumables: 50 Gallons Round Containers, 50 Gallons Slim Containers, 1 Sack Industrial Salt. * Unit 1 350,000.00 10 Anesthesia Machine With Cardiac Monitor. Brand New. Product Specifications: Main Gas Supply -oxygen, Air. Pin Index Supply System: Oxygen, Air. Ventilatior: With At Least Six (6) Ventilation Modes. Machine Must Be Able To Ventilate Patient Using The Preset Settings Provided By The End-user Even Presence Of Driving Gas Is Temporarily Unavailable. Ventilator Must Be Enclosed With Metal Casing To Prevent Entry Of Foreign Items Including Fluid. Ceramic Type Of Inspiratory And Expiratory Valve. Ventilator Must Have High Pressure Valve That Ensures Release Of Excess Pressure When Required. Ventilator Must Be Functional When Machine Is Connected Either Through Direct Power Supply Or Back Up Battery. Breathing System: The Volume Of The Compact Breathing System And Co2 Absorber Must Be 1.7l Excluding Hoses And Breathing Bag. Volume Of Co2 Absorber Reusable Canister Must Be 1.5l. With Bypass Valve Located In Breathing System Allowing Continuous Machine Operation While Changing Co2 Absorber. With Fresh-gas Decoupling Valve That Prevents Direct Entry Of Pressure In The Patient Airway When Pressing The O2 Flush Button, Peep And Pressure Limitation. With Breathing System That Can Be Detached From The Main Unit Without Tools Required. Breathing System Should Be Separated From The Main Unit With Mounting That Can Be Positioned From Any Direction Without Moving The Entire Anesthesia Machine. With Ceramic Type Of Inspiratory And Expiratory Valve. With Sample Gas Return Port. With Pup Off Pressure Release Valve Located At The Apl Valve. With Moisture Reduction System. Hot Steam Sterilization Can Be Carried Out At 134 ° C (273.2 ° F). With Heated Breathing System. Anesthesia Gas Supply Module: Range Of Fresh Gas Flow Indicators: 0.0 To 12.0 L/min. O2 Flush (bypass): At 87 Psi (6 Kpa X 100): Max. 75 L/min At 41 Psi (2.8 Kpa X 100): Min. 25 L/min. With Metering Valve And Dual Flow Tubes For Fresh-gas. With Integrated O2 Monitoring Located In The Screen. Vaporizer: With Two (2) Selectatec Vaporizer Mounting. With One (1) Unit Sevoflurane And One (1) Unit Isoflurane Vaporizer. Vaporizer Must Have No Cloth Component Which Allows Item To Be Functional Immediately Even Transporting It In An Upside Down Position. Oxygen Sensor: With Oxygen Sensor That Measures Percentage Of Oxygen. Flow Sensor: With Constant Temperature Hot-wire Anemometer Flow Sensor. Must Be Located Within The Anesthesia Unit Distal To The Patient Area. Flow Sensor Must Be Reusable. Auxillary Low Flow Oxygen: With Integrated Low Flow Oxygen Supply For Mask And Nasal Cannula Application. Writing Table/drawers/mounting: With At Least 3 Drawers As Storage For Other Accessories. With A Retractable Writing Table That Can Hold At Least 10kgs. Advanced And Safety Features: Functional Even The Battery Is Completely Discharged, All Pneumatic Functions Continue To Be Available (apl Valve, Breathing Pressure Gauge, Cylinder And Pipeline Gauges, Fresh Gas And Agent Delivery, And O2, Air, Flow Meters).manual Or Spontaneous Ventilation Can Be Maintained During Power Failure And Discharged Of Battery. In Case Of No Power And Totally Discharged Battery, Machine Must Be Shifted Automatically From Ventilator Mode To Manual Mode Without Any Switch Or Button Required. Start-up Time Must Be Less Than 15 Seconds. Power Input Data: Power Supply: Rating Non-configurable 100 To 240 Vac, 50/60 Hz, 145 Va. Battery Operation Time: Up To 2 Hours, Minimum Of 45 Minutes. Parameters: Minimum Tidal Volume (vt) Required: 20 Ml. Breathing Frequency (rate): 4 To 60 Bpm (1/min). Inspiratory Pressure: Peep + 5 To 65 Cmh2o. Inspiratory Flow (inspflow): 10 To 75 L/min In Volume And Pressure Control Modes, 10 To 85 L/min In Pressure Support And Simv/ps Modes. Inspiration Pause: 0 To 50 %. Simv Inspiratory Time: 0.3 - 4.0 Sec. Positive End Expiratory Pressure: (peep) 0 To 20 Cmh2o. Inspiration/expiration Ratio: (ti:te) 4:1 To 1:4. Pressure Limiting: 70 Cmh2o. Range Of Fresh Gas Flow Indicators: 0.0 To 12.0 L/min. Pressure Support Level: Peep + 3 To 20 Cmh2o. Min. Frequency For Apnoe-ventilation: (freq. Min.) 3 To 20 Bpm And “off”. Trigger Level: 2 To 15 L/min. Standard Accessories: One (1) Unit O2 Regulator, One (1) Unit Air Regulator, O2, Air Fittings And Hose Clamps, One (1) Unit Adult Anesthesia Circuit With 2l Bag. Biolight M12 Patient Monitor (basic Configuration). Technical Specification: Display/waveforms: Screen Size Display: Not Less Than 12" Color Tft Screen. Screen Navigation: Touch Screen With Quick Volume And Brightness Adjustment. Support Quick Key, Able To Access Specific Functions Or Perform Operations Easily And Quickly. No. Of Waveforms: At Least 7 Waveforms (using Standard Screen Display). Battery: Internal Battery Duration Must Be: ≥ At Least 240 (built In Battery). Can Upgrade Lithium Battery, Battery Power Supply ≥480 Min. Ecg: Ecg Leads: 3/5 Leads, Display Sensitivity: ×0.25, ×0.5, ×1, ×2, ×4,auto Gain, Must Have A Smart Lead Off Feature, Must Have An Ecg Calibration Feature, Must Have An St Segment Analysis And Monitoring. Heart Rate Range Must Be: Adu: 10 To 300 Bpm, Ped/neo: 10 To 350 Bpm, Must Have Two (2) Hr Averaging Method. With Ecg Multi-lead Synchronous Analysis Function, Analysis Of Multiple Cardiac Leads At The Same Time, Can Be Accurately Monitored In The Case Of Individual Lead Interference, With Intelligent Lead Fall Monitoring Function. St-segment Analysis Can Show The St Graphic, Which Help Indicates The St Alarm Status More Faster. Nibp: Nibp Measurements Must Comply With The American National Standard For Electronic Or Automated Sphygmomanometers: - (ansi/aami/iso 81060-2:2009, Ansi/aami Sp10:2002) In Relation To Mean Error And Standard Deviation. Measurement Mode： Manual, Auto, Stat, And Sequence. Sequence Mode Could Support 5 Different Modes. Maximum Measuring Interval In Auto Mode Must. Must Have An Overpressure Protection For Nibp. Temperature: Must Have Dual-channel Body Temperature Monitoring With Difference Display Measurements. Must Support Skin And/or Oral/rectal. If More Than One Temperature Probe Is Used, The Monitor Will Be Capable Of Calculating And Displaying A Delta Reading. Measuring Range: 0～50 ℃. Spo2: Must Be Used In Low Pi (perfusion Index). Resp: Detection Method: Respiratory Rate And Respiratory Waveform Must Be Monitored By Pulse Wave. Trends: Trend Data For All Parameters In Tabular And Graphic Formats Must Be: 180h. Stored Nibp Measurements Must Be: Up To 2400 Groups. Stored Alarm Events Must Be: 3000 Groups And Associated Waveform. Holographic Waveform Must Be 72 Hours. Printer/recorder: Must Support 3-channel Recorder To Realize Thermal Printing; Support Network Printing Function. Network Capability: The Ip Address Of Each Patient Monitor Shall Be User Configurable. Features: -the Monitor Must Provide Electronic Early Warning Scor （ews, Glasgow Coma Scale (gcs), And Oxycrg Screen. -oxycrg Screen Shows Two Trend Curves And A Compression Waveform, Support To Review 48 Hours Trend Curve And Compression Waveform On The Oxycrg Review Screen. -accessories Storage Box, Help Manage Accessories And Prevent Accessories Missing Or Broken Problem. -user Shall Be Able To Freeze The Waveforms On The Screen And Then Review It To Carefully Observe The Patient During This Time. -up To 4 Timers Shall Be Able To Be Configured On Monitor Display To Count Up Or Down The Required Time In Minute And Second With Audio Alarm To Alert User. - The Monitor Shall Provide Following Specific Working Modes: Standby, Intubation, Night, Privacy, And Demo Modes. Accessories Included: 3/5 Lead Ecg Cable, 3/5 Lead Ecg Lead Wires, Adult Spo2 Sensor, Pediatric Spo2 Sensor, Temperature Probe Skin, Temperature Probe Oral/rectal, Nibp Cuff Adult, Nibp Cuff Pedia, Wall Mount / Trolley, One (1) Unit Pediatric Anesthesia Circuit With 1l Bag, Two (2) Units Power Adapter. Includes Avr Machine For Anesthesia Machine. Warranty -2 Years From Delivery, Installation, And Training/orientation. Unit 1 3,300,000.00 11 Cardiac Monitor With Capnograph. Brand New. Product Specifications: Display/waveforms: Screen Size Display: Not Less Than 12" Color Tft Screen. Screen Navigation: Touch Screen With Quickly Volume And Brightness Adjustment By Gestures Operate. Support Quick Key, Can Easily And Quickly Access Some Functions Or Perform Operations. No. Of Waveforms: At Least 7 Waveforms (using Standard Screen Display). Size Must Be: At Least 175mm X 320mm X262mm. With Auto Speech Recognition Module Implements The Voice Interaction With The Patient Monitor. Battery: Internal Battery Duration Must Be: ≥ At Least 240 (built In Battery). Can Up-grade Lithium Battery Power Supply ≥480min. Ecg: 5 Leads Display Sensitivity: ×0.25, ×0.5, ×1, ×2, ×4, Auto Gain. Must Have A Smart Lead Off Feature, Must Have An Ecg Calibration Feature, Must Have An St Segment Analysis And Monitoring. Heart Rate Range Must Be: Adu: 15 To 300 Bpm, Ped/neo: 10 To 350 Bpm. Must Have Two (2) Hr Averaging Method. With Ecg Multi-lead Synchronous Analysis Function, Analysis Of Multiple Cardiac Leads At The Same Time, Can Be Accurately Monitored In The Case Of Individual Lead Interference, With Intelligent Lead Fall Monitoring Function. St-segment Analysis Can Show The St Graphic, Which Help Indicates The St Alarm Status More Faster. Nibp: Nibp Measurements Must Comply With The American. National Standard For Electronic Or Automated. Sphygmomanometers: - (ansi/aami/iso 81060-2:2009, Ansi/aami. Sp10:2002) In Relation To Mean Error And Standard Deviation. Measurement Mode： Manual，auto, Stat, And Sequence，sequence Mode Could Support 5 Different Modes. Maximum Measuring Interval In Auto Mode Must. Must Have A Dual Overpressure Protection For Nibp. Temperature: Must Have Dual-channel Body Temperature Monitoring With Difference Display Measurements. Must Support Skin Or Oral If More Than One Temperature Probe Is Used, The Monitor Will Be Capable Of Calculating And Displaying A Delta Reading. Measuring Range: 0～50 ℃. Spo2: Must Be Used In Low Pi (perfusion Index). Resp: Detection Method: Respiratory Rate And Respiratory Waveform Must Be Monitored By Pulse Wave. Ibp: Support 2-channel Ibp Measurement Range: -50mmhg～+350mmhg. Types Of Measuring Blood Vessels: Arterial Pressure (art), Pulmonary Artery Pressure (pa), Central Venous Pressure (cvp), Right Atrial Pressure (rap), Left Atrial Pressure (lap), Intracranial Pressure (icp); Pulmonary Artery Wedge Pressure (pawp); Cerebral Perfusion Pressure (cpp). The Monitor Will Calculate The Ppv Based On Any Arterial Pressure Value Between Heartbeats. Etco2: Measuring Range: Etco 2 0 To 150 Mmhg. Fico: 3 To 50 Mmhg. Awrr: 0 To 150 Rpm (mainstream). Trends: Trend Data For All Parameters In Tabular And Graphic Formats Must Be: 180h. Stored Nibp Measurements Must Be: Up To 2400 Groups. Stored Alarm Events Must Be: 3000 Groups And Associated Waveform. Holographic Waveform Must Be 72 Hours Printer/recorder: Must Support 3-channel Recorder To Realize Thermal Printing; Support Network Printing Function Network Capability: The Ip Address Of Each Patient Monitor Shall Be User Configurable. The Upper/lower Limits Of Alarms Can Be Configured Via Networking From The Central. The Alarms At Bedside Can Be Paused Or Muted Via Networking From The Central. Features: -the Monitor Must Provide Electronic Early Warning Scor （ews）, Glasgow Coma Scale (gcs ), And Oxycrg Screen. -oxycrg Screen Shows Two Trend Curves And A Compression Waveform, Support To Review 48 Hours Trend Curve And Compression Waveform On The Oxycrg Review Screen -accessories Storage Box, Help Manage Accessories And Prevent Accessories Missing Or Broken Problem -all-in-one Monitoring Adult, Children, And Newborn Patients. -user Shall Be Able To Freeze The Waveforms On The Screen And Then Review It To Carefully Observe The Patient During This Time. -up To 4 Timers Shall Be Able To Be Configured On Monitor Display To Count Up Or Down The Required Time In Minute And Second With Audio Alarm To Alert User. - The Monitor Shall Provide Following Specific Working Modes: Standby, Intubation, Night, Privacy, And Demo Modes. Warranty -1 Year From Delivery And Installation. Unit 2 500,000.00 12 Ceasarian Instrument Set. Brand New. Product Specifications: Made Of Heavy Duty Stainless Steel. Includes The Following Items: 1 Pc. Scalpel Handle #3 With Measure 125mm, 1 Pc. Scalpel Handle #4 135mm, 1 Pc. Tc Metzenbaum Scissors Cvd 180mm, 1 Pc. Lexer Scissors Narr Str 165mm, 1 Pc. Mayo-lexer Scissors Cvd 165mm, 1 Pc. Lister Bandage Scissors Hvy 180mm, 1 Pc. Standard Forceps Serr 160mm, 1 Pc. Standard Tissue Forceps 1x2 160mm, 5 Pcs. Lorna Towel Clamp Non-perf 130mm, 6 Pcs. Halsted-mosquito Forceps Delstr125mm, 6 Pcs. Halsted-mosquito Forceps Del Cvd125mm, 2 Pcs. Kelly Forceps Del Str 140mm, 6 Pcs Moynihan Hemostatic Forceps, Crv, 150mm, 1 Pc. Tc Mayo-hegar Ndlholderhvyserr150mm, 1 Pc. Tc Hegar Needle Holder Hvy-serr 205mm, 1 Pc. Us-army Retrac.26x15/43x15-23x15/40x15, 1 Pc. Richardson-eastman Bt471rbt472r, 6 Pcs. Boys-allis Forceps 5x6 155mm, 2 Pcs. Kidney Tray Stainless Steel 250mm, 1 Pc. Bottom For 3/4 Container Height:135 Mm, 1 Pc. Primeline Pro 3/4 Lid Red, 1 Pc. 3/4 Size Perf Basket 406x253x76mm, 1 Pc. Silicone Basket Liner 3/4 Size, 1 Pc.mayo Safety Pin F/ring-hdl Inst 140mm, 1 Pc. Ident. Label Up To 13 Letters Red. Warranty –at Least Eat 1 Year From Delivery. Set 2 1,520,000.00 13 Chemical Analyzer. Brand New. Product Specifications: Combined Instrument With Two Complementary Technologies: Raman Spectroscopy And Colorimetric Detection Confirmatory Testing: One Instrument Capable Of Confirmatory Testing Using Two Technologies Including 1) Swgdrug Category A Technique For Presumptive Testing, And 2) Swgdrug Category C Technique For Confirmatory Testing Safety Of Features For Measuring Energetic Samples: Trace Detection Testing For Energetics Without Need For Opening The Container Nor Inducing Laser Light To The Sample, Scan Delay Timer: 15 Sec – 10 Min Sample Size: Able To Detect / Identify Samples From 1 Microgram Traces To Large Bulk Samples Materials Covered: Common Raman Substances, Explosives, Narcotics, Cwas, Tics, Tims, Precursors, Common Chemicals, Fluorescent Materials Not Covered By 785nm Raman: E.g. Colored Materials, Heroin, Colored Mdma Pills, Oils, Npss, Etc., Low Concentration Materials Not Covered By Any Raman Instruments: Lsd, Thc, Magic Mushrooms, Gunpowder, Etc. Raman Excitation Wavelength: 1064nm Minimizes Fluorescence Effects: Allows For Direct Analysis Of Colored/impure Chemicals Through Colored Packaging. Spectral Wavelength Range 200 – 2500 Cm-1 Portability Power: Small Handheld Device, Optimized For One Handed Operation. , 18.5cm-20cm (l) X 15cm-20cm (w) X 7.9cm-10cm (h), 3.65lbs-5lbs (1.65 Kg-2.27kg)., Quantity 2 Lithium Ion Rechargeable Batteries With Battery Life Of More Than 6 Hours Per Charge Per Battery. Cr123a Rechargable Batteries Can Be Used. Including Spare 2 Lithium-ion Battery. Ruggedness Decontamination: Us Mil-std 810g Designed Rugged., Ip 68 Rated For Use In Varying Environmental Conditions And For Complete Decontamination. Operational Temperature Range: Unit Can Be Operated In -20°c To +50°c Temperatures., Withstands Temperature Fluctuations And Humidity Fluctuations. Rapid Start-up Rapid Results: 60 Seconds From Power On To Analysis., Analysis Results In Less Than One Minute. Operational Mode Options: Raman Analysis And Colorimetric Analysis Oraman: • Auto-collect Adjusts Raman Settings Automatically Optimizes Use For Routine Operations • Advanced User Adjustable Raman Settings For Advanced Operators And Custom Library Build: • Laser Power Level 30-490 Mw Adjustable In 5 Mw Increments Exposure Time 5ms To 30s In Increments • Custom Applications Optimize Raman Analysis Parameters Specific To Material Type Ocolorimetrics: • Pouches Including Both Swipes And Colorimetric Chemicals In One Pouch • Pouches For Explosives And Narcotics • General Pouches For Detecting A Wide Range Of Explosives Or Narcotics • Specific Pouches For One Explosive/narcotic Substance Or Substance Group Easy Raman Operation: • Scans In Direct Contact And Through Translucent Plastic Or Glass Containers. • Universal Sample Holder For Analysis Of Samples In Varying Forms And Packaging. • Smartphone Like Touch-screen Interface Or Large Button Activation. • User Prompted Step-by-step Onscreen Analysis Activation. • Typically, 4 Button Presses To Receive Analysis Result. • Onboard System Status Monitoring And Calibration. Reduces Down-time And Necessity For Re-calibration At A Service Depot Analytical Performance: • Liquids, Solids, Powders, Pastes, Gels, Invisible Traces. • Colored Substances And Substances Found In Colored Translucent Packaging. These Types Of Substances Are Most Often Encountered In Real-world Samples. • Comparative Spectral Analysis Overlay Easily Performed Onboard. • User Adjustable Focus Ensures Analysis Of Material And Not The Packaging. • 4c Software Automatically Monitors Results For Combinations Of Precursors Used In Threat, Drug Manufacturing, And Other Recipes. Users Receive Onscreen Alert To Potential Threat Or Clandestine Drug Manufacturing Activity. Library: Raman: • Over 12,000 Substances. • Resq Library Includes The Latest Explosives, Precursors, Cwas, Tics/tims, Narcotics And Psychotropic Drugs, Steroids, Cutting Agents, Pharmaceuticals, Diluents And Pesticides. • Easily Expandable To Add Emerging Threats And Other Substances. • Fleet Management And Library Transfer To Units In The Field. • 4c Library With Explosive, Drug Manufacturing And Other Types Of Threat Manufacturing Recipes. • Library Updates Provided More Than Once A Year Colorimetrics: • General Narcotics Pouches: Multi Drug Test Incl. Fentanyl, Special Opiate Pouch, Cannabinoids • General Explosives Pouches: Chlorates/perchlorates, General Explosives • Specific Pouches: Cocaine, Ephedrine, Heroin, Ketamine, Lsd, Meth/mdma, Mushrooms, Opiates, Pcp, Thc, Ghb Evidence Documentation Traceability: • Onboard 5mp Camera Captures Image Of Sample And Surroundings, As Well As Colorimetric Swab. • Image(s) Stored Along With Analysis Results In Tamper-resistant File. All Analysis Results Are Traceable And Include Unique Date, Time And Serial Number Stamp. • Ability To Activate Password Protect Operator Log-in. Record Of User Associated Activity Stored Onboard And Cannot Be Deleted. Data Access And Transfer Reporting: • View Results In Real Time On Cell Phone Or Tablet, Computer Or Laptop (pc, Ios, Android, Linux) Via Wifi (can Be Disabled). • Exportable Data In Numerous File Formats. • Data Access And Transfer On Computer Or Laptop Via Usb And Wifi (can Be Disabled). • Easy Report Generation. Customer Support Package: • 24/7/ 365 Days Reachback Service For The Life Of The Unit. • Library Updates Provided For The Life Of The Unit. • Software Updates Provided For The Life Of The Unit. • Support: Online, Phone, Email, And In Some Cases Text Message For The Life Of The Unit Cql Complete Package: • Rugged Shipping Case With Custom Foam Insert. • Qty 2 Rechargeable Lithium-ion Batteries. • Cr123a Battery Cartridge (does Not Include Cr123a Batteries). • External Battery Charger. • Ac Power Supply. • Adjustable Base Adaptor. • Universal Sample Holder. • Certified Benzonitrile Performance Verification And Calibration Standard. • Flash Drive Containing User Manual And Supporting Documentation. • Quick Start Guide. • Usb-c To Usb-a Data Transfer Cable. • 1064nm Laser Test Card. • Including Hand Strap And Wrist Strap. . Training: • Comprehensive Onsite Training For An Unlimited Number Of Users. Add-on Accessories And Software: • Periscope Adaptor. • Vial Holder. • Bottle Adaptor. • Integrated Quickdetect Automated Colorimetrics • Detect Trace Quantities Of Non-visible Residues Left On Surfaces: • Explosives And Explosive Precursors • Narcotics Standard Requirements: • Bidder’s Certificate That Will Provide Manual In English Language (2 Copies Of Operator's/user's Manual And 2 Copies Of Service/technical And Maintenance Manual) Upon Delivery. • Brochure/sales Literature. Training Requirements: • Bidder’s Certificate That Will Conduct Free Technical Training And Product Demo For The End-user/s And In-house Biomed On Equipment Operation And On Maintenance Of Equipment. • After Sales Service: Bidder’s Certificate That Parts Shall Be Available At The Authorized Philippine Service Center/s For A Period Of Five (5) Years After The Warranty Period. • Certification From Local Distributor On The Availability Of Service Technicians And/or Biomedical Engineers In Case Of Equipment Breakdown. Preventive Maintenance - • Bidder’s Certificate Free Quarterly Preventive Maintenance During The Warranty Period With Preventive Maintenance Plan. Warranty Certificate: • Warranty Certificate Minimum Of Five (5) Years For Service And Three (3) Years For Parts. The Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Testing And Commissioning. • Calibration: With Certificate Of Calibration Upon Delivery. The Bidder Must Be Iso 9001 And The Manufacturer Should Be Iso 13485 Certified Unit 1 6,900,000.00 14 Common Bile Duct Exploration Supplement Set. Brand New. Product Specifications: Made Of Heavy Duty Stainless Steel. Includes The Following Items: 1 Pc. Randall Kidney-stone Frcpsslt-cvd225mm, 1 Pc. Randall Kidney-stone Forceps Cvd225mm, 1 Pc. Randall Kidney-stone Frcpshvy-cvd225mm, 1 Pc. Randall Kidney-stone Frcps U-cvd225mm, 1 Pc. Bakes Bile-duct Dilator 1mm, Bakes Bile-duct Dilator 2mm, 1 Pc. Bakes Bile-duct Dilator 3mm, 1 Pc. Bakes Bile-duct Dilator 4mm, 1 Pc. Bakes Bile-duct Dilator 5mm, 1 Pc. Bakes Bile-duct Dilator 6mm, 1 Pc. Bakes Bile-duct Dilator 7mm, 1 Pc. Bakes Bile-duct Dilator 8mm, 1 Pc. Bakes Bile-duct Dilator 9mm, 1 Pc. Bakes Bile-duct Dilator 10mm, 1 Pc. Randall Kidney-stone Forcepscvd190mm, 1 Pc. Randall Kidney-stone Fcpshvy-cvd190mm, 1 Pc. Bottom For 1/2 Container Height:135mm, 1 Pc. Prime Line Pro 1/2 Lid Green, 1 Pc. 1/2 Size Perf Basket 243x253x76mm, 1 Pc. Identification Label Green. Set 1 590,000.00 15 Defibrillator. Brand New. Product Specifications: General Features: 7-10 Inch Lcd Display, Maximum Of 3 Waveforms. High Contrast Display Mode For Bright Environments. Ambulance-ready, Rugged Casting: Ip44, Impact Test Of 0.75m. Output Energy: 1-360j. Charge Times Of <3s T O200j, <7s To 360j. Auto-volt With Smart Charging. Lithium-ion Battery Supports To 6 Hours Monitoring/200 Shocks @360j/ 4.5 Hours Pacing, With Built-in Led Power Level Indicator. Lightweight At 4-5kg., Full Configuration, Main Unit. Automatically Switch Defibrillator Energy, Cpr Prompts, And Alarm Limits Depending On Patient Type. Display Ecg During Aed Mode. Ecg Recovery Within 2.5s Or Less. Contact Status Can Be Checked Through Paddle And Monitor, Impedance Value Can Be Checked In Monitor. Auto-testing Includes Maximum Energy Discharge Test. Parameters: 3/5 Lead Ecg, Pacer. Includes: Thermal Recorder, External Paddle Kits, Ecg Cable And Lead Wires, Ecg Electrode, Multifunction Electrode Pad. Printer Paper, Electrode Gel, Power Cord, Lithium-ion Battery. Unit 5 1,500,000.00 16 Dish Sterilizer. Brand New. Product Specifications: − High Light Led Display, − With Special Boiler Temperature Drainage Settings, − Washing (non-recycling) Parameters Can Be Set Free And With Control Memory Function, − Can Meet Different Washing Demand, − Self - Research Internal Water Softener, − Double Construction Design For Top Cover, − Power: 380v/50hz, − Basket Dimension : 500x500mm, − Washing Ability : At Least 60 Basket / H, − Rinse Water Quantity : 3 L/h, − Inlet Height :400-430mm, − Machine Dimension : 800-850x800-820x1450-1500mm, − Rated Power : 14.75kw, − Gross Weight : 140-150, − Net Weight : 100-110, − Packing Size : 890-900x900-910x1630-1700mm. Warranty Period- Within 1 Year Upon Delivery And Installation To Cover Parts (excluding Wearable Parts) And Service With Preventive Maintenance Every 6 Months Within 2 Years Period. Provides Orientation And Training To End-user Representative.* Unit 1 500,000.00 17 Electrocardiography Machine (ecg) Brand New. Product Specifications. High Resolution Lcd Touch Screen, 320-330x240-250vivid Waveform Display. 12 Leads Ecg Resolution Thermal Printer. Built-in Rechargeable Li-ion Battery, Ac/dc Power Supply. Anti-defibrillator And Pace Maker Detection. Complete Digital Filtering, Resisting Baseline Drift, Automatic Baseline Adjustment. Automatic Ecg Measurement And Interpretation. Large Patient Data Storage; 150 Cases, Equipped With Usb Port For Data Transfer. Three (30 Printing Formats (auto, Manual And Rhythm) Selectable. 1/2/3 Channel Ecg Waveform And Rhythm Leads Record Out. Lead Status Diagram Display. Unit 4 200,000.00 18 Electrosurgical Dessicator Machine. Brand New. Product Specifications: Use For Removal Of Lesions, Warts, Skin Tags, And Other Blemishes Easily With Minimally-invasive Treatment. For Superficial Treatments, Safe To Use Around The Eye And Nose Area. Includes Re-usable Pen And Tips. Unit Specifications: Depth:4-5 Inches, Width:8-9 Inches, Height:7-8 Inches, Weight:6-8 Pounds, Output Power -low At 0-20watts (1/10 Watt Increments Up To 10 Watts), High At 0-35 Watts, Bipolar: 0-35 Watts. Offers Hand-or-foot Activated Operation. Autoclavable, Reusable Hand Control Pencil With Power Adjustment Buttons. Pencils Are Designed With Non-spinning Hex Collar For Multi-positional Fall-safe Blade Locking. Equipped With Mobile Stand. Includes Consumables.warranty-6 Months From Delivery And Installation. Set 1 100,000.00 19 Fetal Maternal Monitoring System: Brand New. Product Specifications: Foldable Screen. Probe Rack And Wall Mounting Rack. Handle For Easy Carrying. User-friendly Gui With 3 Display Modes. Four (4) Optional Color Background. Capable Of 24 Hours Ctg Storage. Fast Print For Store Traces. "smart Notes" Annotation (color Optional). Signals Overlap Verification. Real-time And Offline Data Transmission To Pc. 10-12 Inch Color Touch Screen. Excellent Algorithm. 12-crystal And 1 Mhz Water-proof Transducer For Accurate Detection. Configuration: Dual-fhr, Toco, Fm, Afm, Mecg, Nibp, Mspo2, Temp. Includes: 3 Each Belt, 1 Each Event Marker, 1 Bottle Ultrasound Gel, 1 Ea. Fhr Transducer, Purple, 1 Each Transducer, Yellow (color Optional), 1 Each Spo2 Sensor, Adult, 1 Each Temperature Probe, Skin, 1 Each Toco Probe, 1 Each Nibp Cuff, Adult, 1 Each Nibp Tube, Adult. Unit 3 1,110,000.00 20 Infusion Pump. Brand New. Product Specifications: Mechanism: Peristaltic Pump, Operating Mode: Flow Rate Mode, Drip Rate Mode(optional), Preset Volume: 1-9999 Ml, Flow Rate Range: 1 – 600 Ml/h (or Wider), Increment: 1, 10, 100 (ml/h), Accuracy: ± 5%, Kvo Rate: 1 Ml/h, Bolus Rate: 600 Ml/h, Drop Rate Range: 1 – 400 Drop/min (or Wider) With Optional Drip Sensor, Screen: 2.7 Inches B/w Lcd (or Wider), Information: Flow Rate, Preset Volume, Accumulated Infusion Volume, Completion, Occlusion, Air Bubble, Bed No, Ac Power Indicator, Battery Capacity, Battery Charge Indicator, Iv Set, Etc., Status Indicator: Stop, Run, Bolus, Kvo, Alarm Type: Air Bubble, Finish, Occlusion, No Ac Power, Low Battery, Battery Empty, Reminder To Operate, Communication Error (err1), Operation Error (err2), Drops Error (err3), Handle Open (err4), Air Bubble Level: 1-3 Levels Adjustable, Universal Compatibility, Turn On/off, Occlusion Alarm Pressure Range: 3 Levels: 60kpa, 100kpa, 140kpa (±20kpa), Battery Type: Lithium Polymer, Battery Life: Up To 4 Hours Continuous Operation 25 Ml/h Flow Rate, With Delivery And Installation, Provision Of Trainings Of Staff With Certificates, And Manual. Unit 4 320,000.00 21 Laboratory Oven. Brand New. Product Specifications: Working Temperature Range At Least 5 Above Ambient Temperature To +300 °c; Setting Accuracy Temperature Up To 99.9 °c: 0.1 / From 100 °c: 0.5; Setting Temperature Range +20 To +300°c; Temperature Sensor 1 Pt100 Sensor Din Class A In 4-wire-circuit. Control Cockpit Single Display. Adaptive Multifunctional Digital Pid-microprocessor Controller With High-definition Tft-colour Display; Timer Digital Backwards Counter With Target Time Setting, Adjustable From 1 Minute To 99 Days; Adjustable Parameters: Temperature (celsius Or Fahrenheit), Air Flap Position, Programme Time; Ventilation: Natural Convection, Vent Connection With Restrictor Flap; Works Calibration Certificate : Calibration At +160°c; Door Fully Insulated Stainless Steel Door With 2-point Locking (compression Door Lock); Internals 1 Stainless Steel Grid(s), Electro Polished; Stainless Steel Interior; Interior Easy-to-clean Interior, Made Of Stainless Steel, Reinforced By Deep Drawn Ribbing With Integrated And Protected Large-area Heating On Four Sides; Volume 32 L; Dimensions W(a) X H(b) X D(c): 400 X 320 X 250 Mm; Max. Number Of Internals: 3; Max. Loading Of Chamber 60 Kg; Max. Loading Per Internal 20 Kg; With Free Power Back-up System, With Free Installation And Demonstration. Unit 1 130,000.00 22 Newborn Hearing Screening Test Equipment. Brand New. Product Specifications: • Capable Of Screening And Diagnostic Testing With Te And / Or Dpoae. • Fast Automatic Test With Pass / Refer And Graphical Test Result Display. • Direct Evaluation Via Value And Bar Diagram. • Up To 12 Frequencies Displayed Within The Device, Dp Up To 12 Khz. • 5 Dp / 2 Te Protocols With User Customizable Parameters (diagnostic Version). • High Noise Immunity For Operation In Normal Clinical Environment. • Lightweight, Small Ear Probe. • Environmentally Friendly Due To Long Life, Rechargeable Battery. • Bluetooth Communication To Optional Printer And Pc • Evaluation Of Results In Pc. Screener With At Least 4 Frequency Dpoae Testing Protocols. • Qualified Protocols Built Into The Device. • 4 Dpoae Test Frequencies Reported. • Integration To State Tracking Systems, Hi-track Or Oz. Diagnostic With Up To 12 Frequency Dpoae Testing Protocols. • 1.5 To 12 Khz Frequency Range With Up To 12 Test Frequencies Reported. • Customizable Test Protocols Teoae Available As An Upgradeable Option. Measurement Type: Distortion Product Otoacoustic Emissions (dpoae) Transient Evoked Otoacoustic Emissions (teoae). Frequency Range: Screener Version: Dpoae: 2.0 Khz To 5.0 Khz Teoae: 1.5 Khz To 4.0 Khz. Diagnostic Version: Dpoae: 1.5 Khz To 12.0 Khz Teoae: 0.7 Khz To 4.0 Khz. Stimulus Intensity Range: Dpoae: 40 Db Spl To 70 Db Spl Teoae: 83 Db Spl Peak Equivalent (±3 Db). Microphone System Noise: -20 Db Spl @ 2 Khz (1 Hz Bandwidth)/ -13 Db Spl @ 1 Khz (1 Hz Bandwidth). Dimensions And Weight (unit): 2.5 To 3” W X 1.2 To 1.8” D X 5.5 To 6.5” H 6.2 To 6.8 Oz. Power Supply: Lithium-ion Rechargeable. Battery Life: 1000 Tests Per Charge, Minimum 15 Hours On-time. Connectors/ Communications: Integrated Usb Communication Capability For Battery Charging And Communication With Pc-based Database Programs Or An Optional Printer. Hdmi Connector For Connection To The Micro-probe. Integrated Bluetooth Class 2 + Edr With Spp. Protocol For Communication With Optional Printer. Standard Accessories: Micro-probe, Box Of Single Use Ear Tip And Ear Tip Remover, Package Of Probe Tubes, Micro-usb Power Supply For Charging Lithium Ion-battery, Pc Database Software With Manual, Micro B To A Usb Cable For Pc Communicator/charging, Protective Carrying Case, Data Management Tool That Provides The Ability To Transfer Patient. Oae Test Data From The Testing Device To A Pc For The Purposes Of Viewing, Archiving, Managing And Printing Oae Reports. Using The Database Also Gives You The Means To Create Letter Sized, Detailed Reports That Can Be Easily Filed Or Faxed. You Can Also Create A “paperless” Office By Saving The Test Results As A Pdf For Electronic Filing Or Email. Dpoae: 40 Db Spl To 70 Db Spl Teoae: 83 Db Spl Peak Equivalent (±3 Db). Includes Ups. Warranty –at Least 1 Year After Delivery And Installation. Provision Of Training For End-user To Accredited Newborn Screening Center. All Expenses Should Be Shoulder By The Lowest Calculated Bidder. Unit 1 1,000,000.00 23 Operating Room Lights. Brand New. Product Specifications: Dual Head- Ceiling Type. Major Operating Room Light Multi-color. Merging Of Light Fields, Light Intensity Control. Comfortable Display Of Key-pad On Major Lighting Head. Back Light Key Pad Display. Depth And Merging Light Field Should Be Operated At The Sterilizable Handle. Cool Light Temperature Increasing In Head Area: 0.5 ºc. 360° Continuous Rotation Around All Major Joints. Anti-bacterial Coating Head. - Light Head Diameter: 66cm. Ideal Laminar Flow Ceiling System. With Endo Mode: Must Be Color Green Light. Main Light Head. Electronic Light Intensity Control At Lamp Head. - Light Intensity At 1 Meter Distance: 160,000 Lux. Colour Rendering Index Ra At Kelvin: 98 (for Better Quality Image Of Skin, Blood And Tissues). Colour Rendering Index R9 At Kelvin: 99 (for Better Quality Image Of Skin, Blood And Tissues). Focusable Light Field Size: 19-30 Cm. Colour Temperature: 3,750, 4,000, 4,250, 4,500, 4,750 K. - Adjusting The Shadow Activating Via The Touch Panel. - Maximum Of Four Groups Of Lenses Are Dimmed Simultaneously. Shadow Management System. Number Of Led’s: 99 On Lamp Head. Life Span Of Leds: > 60,000 H. Working Distance: 70-160 Cm. Light Intensity Control (standard): 5% - 100%. Outstanding Depth Illumination: 70, 100, 130 Cm. Laser Pointer On Head (main Light Head Only). Lf-index Leenemann: 26. Lf-index Oostlander: 28. Input Voltage: Single Phase 110 ~ 230 Vac Free Volt. Total Power Consumption: 82 - 92watts. Adjustable Brakes At The Horizontal Arm. Light Head Weights: 18.5 Kg. Protection Type Lamp Head: Iec60529. - Aluminum Housing. Satellite Head. Electronic Light Intensity Control At Lamp Head. - Light Intensity At 1 Meter Distance: 140,000 Lux. Colour Rendering Index Ra At Kelvin: 98 (for Better Quality Image Of Skin, Blood And Tissues). Colour Rendering Index R9 At Kelvin: 99 (for Better Quality Image Of Skin, Blood And Tissues). Focusable Light Field Size: 18-30 Cm. Colour Temperature: 3,750, 4,000, 4,250, 4,500, 4,750 K. Number Of Led’s: 69 On Lamp Head. Life Span Of Leds: > 60,000 H. Working Distance: 70-160 Cm. Light Intensity Control (standard): 5% - 100%. Outstanding Depth Illumination: 70, 100, 130 Cm. Input Voltage: Single Phase 110 ~ 230 Vac Free Volt. Total Power Consumption: 82-92 Watts. Adjustable Brakes At The Horizontal Arm. Light Head Weights: 17.9 Kg Minimum. - Aluminum Housing. Protection Type Lamp Head: Iec60529. Standard Accessories: - Sterilized Handle: 2 Pcs/ Lamp Head, - Ceiling Anchorage Ring With Screws, - Spring Arm, - Ceiling Cover, Including Installation Of Brackets To Embed Overhead Ceiling- User Manual, - Ups. Warranty Of Two (2) Years For Parts And Labor With Free Preventive Maintenance Every Quarter Within Warranty Period Five (5) Years Warranty For Led Bulb Only. Unit 1 2,500,000.00 24 Operating Room Table (motorized). Brand New. Product Specifications: Total Length: 2000-2100 Mm. Width Including Side Rails: 600-630 Mm. Mattress Width: 550-570 Mm. Total Weight: 200-210 Kg. Safe Working Load (swl): Up To 250 Kg. Height Adjustment Range: From 595 Up To 1005 Mm. Castors: Four Ø 120-125 Mm Central Locking Twin Castors. Head Section: -58° ... +37°, 135 Mm. Back Section: -10° ... +70°. Leg Section: -80° ... +10°. Lateral Tilt: 20° / 20°. Trendelenburg/anti-trendelenburg: 30° / 20°. Sliding Tabletop For C-arm Function: 300-320 Mm. Flex / Reflex: 220° / 120°. Electrical System: 24 Vdc, Battery Operated, 100 - 240 Vac, 50/60 Hz. Controls: Hand Control And Integrated Control Panel On The Column. Memory Positions: Four Programmable Positions. Visco-elastic Mattresses. Radio Lucent Tabletop For X-ray. Accessories For General Surgery: 1. Arm Rest, 2. Anesthesia Frame With Clamp And, 3. Attachment Clamp. Transport And Storage Conditions: Temperature 7 10° C + 50° C. Relative Humidity 10 %, 85 %. Air Pressure 700 Hpa, 1060 Hpa. Operating Condition: Temperature +10° C, + 40° C. Relative Humidity 30 %, 75 %. Air Pressure 700 Hpa 1060 Hpa. Side Rail Accessories: 25 X 10mm. Warranty-1 Year From Delivery And Installation. Certificate Of Parts Available In The Next 5 Years. Includes Training To End-user. Includes Product Manual. Unit 2 5,500,000.00 25 Radiant Warmer With Phototherapy Units. Brand New. Product Specifications: Fixed Height Radiant Warmer, Mounted On A Column. The Unit Is Supported By A T-shaped Sturdy And Stable Wheeled Base. Bases Is Provided With A Minimum Three (3) Anti-static Swivel Casters. At Least Two (2) Of The Casters Are Equipped With Brakes. The Base Is Equipped With A Side Handle/rail For Easy Positioning. The Design Of The Base Is Suitable To Be Fitted Over Standard Cradles, Cribs, And Bassinets. Overhead Radiant Heater At A Fixed Height Of 1.80-2.0m. Radiant Heating Is Achieved By Quartz/ceramic Elements, Placed In A Parabolic Reflector. The Radiator Is Equipped With A Safety Grid. The Unit Support Three (3) Modes: Pre-heating, Manual And Servo Mode. The Unit Allows For Instant Switching Been The Different Operating Modes. The Minimum Skin Temperature Setting Range Is 32°c To 37°c. The Resolution Of The Temperature Is: ± 0.5°c Or Better. In Manual And Pre-heating Modes Heating Settings Allow For A Range Of 0 – 100%. Led Spotlight(s) For Examination Are Integrated In The Overhead Radiant Heater, The Angle Of The Overhead Light Is Adjustable. Warm-up Time < 30 Min To 25°c. Power Requirements: 1 Ph, 100 - 240 Volts - 50/60 Hz 900 To 1300va (with Ups And Avr). Display Features: The Display Panel Is Integrated In The Column For Visualizing Working Parameters And Alarms. The Display Indicates: - The Current Active Mode: Pre-heating, Manual Or Servo, - The Current Heating Power In Percentages, - The Current Pre-set Temperature, - The Current Actual Skin Temperature, - The Current Air Temperature. The Unit Is Equipped With A Self-check Feature. Alarm And Safety Features: Alarms Are Audible And Visible. Alarms Indicating: - Sensor Disconnection Or Malfunction. - Power Failure. - Skin Temperature, After Stabilizing, Varying Beyond 0.5° To 1°c From Set-point. - 10 To 15 Minutes After Manual Mode Has Been Engaged An Audible Alarm Will Sound. In Addition, The Unit Will Either Reduce Or Cut The Power To The Heater. In Skin Mode, When The Temperature Exceeds 39°c, The Unit Will Cut The Power To The Heater. Supplied With: Instructions For Assembly, Use And Maintenance In English: 1 X Installed And 2 X Spare Reusable Skin Temperature Sensors, Including Connection Cable And Plug. 1 X Spare Quartz/ceramic Heating Element Or The Same With Installed Heating Element. 2 X Spare Examination Light Bulbs. 1 X Set Of Spare Fuses, If Applicable. Accessories: A Durable Light Weight Cradle/crib And Mattress. Oxygen Regulator Including A Pressure Gauge, Flow Meter, Humidifier Bottle And All Required Tubing. Integrated Weighing Scale. Electrically Operated, Slow Suction Unit Including A Vacuum Regulator, Vacuum Gauge And Autoclavable Collection Jar. Electrical Height Adjustment. T-piece Resuscitator. Integrated Phototherapy Unit. Led Phototherapy Unit 36cm: 620-2800μw/c㎡. Led Phototherapy Unit 50cm: 400-1620μw/c㎡. Estimated Life Span: Eight Years. Includes Avr. Unit 3 600,000.00 26 Refrigerator (biological). Brand New. Product Specifications: External Dimension: W = 700-750 Mm D = 730-750 Mm H = 2000-2100 Mm. Inside Dimension: Useful Space On Top W = 600-620 Mm D = 550-570 Mm H = 500-550 Mm. Useful Space At The Bottom W = 590-610 Mm D = 540-560 Mm H = 500-550 Mm. Capacity: 600 L Temperature Range: Top 2°c To 20°c Bottom 2°c To 20°c. Optional: Other Temperature Ranges. Housing Galvanized Sheet Steel With High Quality White Coating, Antibacterial Coated. With 4 Feet, Height Adjustable. Optional: Set Of 4 Casters, 2 With Brakes. Interior Space Inner Case Of Galvanized Sheet Steel With High Quality White Coating, Antibacterial Coated. Cleaning Friendly By Rounded Corners, Slippery Surface In The Interior, Meets Highest Hygiene Requirements Insulation High Density Foamed-in-place Polyurethane, With A Thickness Of 60 Mm. Cfc-free. Circulation Air Cooling For Rapid And Uniform Temperature Control, Reducing Temperature Gradients To A Minimum. When The Door Is ""open"" The Circulating Fan Is Switched Off Automatically By A Micro Switch In Order To Prevent Warmer Ambient Air Being Drawn In. Door 2 Pcs. Three-layer Thermally Insulating Glass Door (arranged On Above The Other), Supplied As Standard With Right Hand Hinge, Also Available With Left Hand Hinge At No Extra Cost. Grease Resistant Magnetic Seal. Optional: With Door Lock. Interior Fittings 4 Pcs. Grating-type Shelves (dim.: 530x550 Mm), White Coated. Interior Lighting With Automatic On/off Micro Switch. Optional: Stainless Steel Shelves Or Stainless-steel Drawer Compartments, With 3 Lengthwise Dividers With Telescopic-type Guides On Rollers With Stops, Drawer Dimensions: 500x480x77 Mm (wxdxh) Usable With Between The Lengthwise Dividers: 106 Mm (lengthwise Dividers Easily Removable). Working Range 1 From 2°c To 20°c (assuming The Ambient Temperature Is Approximately 4°c Above The Set Point). Temperature Accuracy +/- 1,8°c After Stabilization (with 50% Of Loading). Acoustics Signal When The Set Value Is Undercut Or Exceeded Potential-free Connection Socket For Extern Alarm Refrigerating Unit 2 Pcs. Fully Hermetically Sealed, Forced Ventilation, Fitted On Vibration – Absorbing Mounts (ambient Temperature Max. 32°c), Low Noise (48dba/1m), Energy Saving Compressor With High Quality Vaporization System. Refrigerant: R 290 Or Equivalent Defrost Automatically With Thermal And Time Limit. Condensate Evaporation In Heated Tray. During The Defrost Period, The Temperature Inside The Cabinet (only The Air Temperature – Not The Stored Goods) Will Arise For A Short Time. Electrical Date: Power Supply220-230 V/50 Hz/single Phase Optional: 60 Hz. Power Input 2x 0,20 Kw. Fuse 16a. Power Cable: 2x 1,5 M. Packing Details (palletized) Dimensions: Approx. 85x98x224 Cm. Net Weight: 150-170 Kg. Gross Weight: 180-200 Kg. Include Avr. Unit 1 100,000.00 27 Rigid Video Procto-sigmoidoscope. Brand New. Product Specifications: Plastic Obturator. Video Camera. Stainless Steel Tube. Handle Of Polyacetal (delrin), Usb Male Connector. Analogue To Digital Converter Nozzle For Gas. Instrumentation Channel. Silicone Washer. Includes Universal Fiber Optic Light Source Machine And Tube Connector From The Proctoscope To The Light Source Machine. Warranty -6 Months From Delivery And Installation. Set 1 50,000.00 28 Stretcher, Transport Type. Brand New. Product Specifications: Hydraulic Stretcher. Numbers Of Function: Five-function. Certification: Ce, Fda, Iso13485. Size: 2000-2100 Mm (l)*770-800mm (w)*600-610/900-920mm (h). Height:600mm-930mm. Lowest Position-floor To Platform-580mm. Highest Position-floor To Platform-905mm. Side Rail Height Above Mattress Platform-340 To 360mm. Maximum Back Rest-0-80 Degrees. Maximum Knee Rest-0-30 Degrees. Maximum Trendelenburg Reverse Tr-0-16 Degrees. Mattress Size -1850-1880 X 650-670 X 80-90mm. Loading Capacity -up To 200 Kg. Side Rails: Collapsible Aluminum Alloy Side Rails. Bed Platform: X-ray Transparent. Specification: Ce, Fda, Iso. Other Features: 1. Central Brake System: Equipped With Four Brake Pedals On All Sides Of The Bed Make The Brakes At The Optimal Position Effectively Or Central Brake Pedal Located At Both Ends Of The Bed. 2. Multi-function Instrument Support: The Instrument Support Can Put The Monitor And Can Also Be Used As A Headboard To Prevent Accidental Slippage Of The Patient. 3. Push Handle: Reducing The Workload And Preventing The Injuries. 4. High Quality Mattress: Waterproof Cloth With The Smooth Surface Of The Mattress, Easy To Clean And Not Misplaced. 5. Large Diameter Wheel: Using The Imported 7 To 8-inch Silent Caster Make It Flexible And Durable. 6. The Fifth Wheel: The Fifth Wheel Can Provide A Smaller Radius Of Gyration. The Telescopic Collapse Design Can Slide Smoothly Even On The Rough Surface Or Obstacles Such As The Elevator Sill, Reducing Effectively The Damage Caused By Transport To Patients. 7. Plastic Coated Side Rails: The Side Rails With Stainless Steel Column Guardrail Covers Almost Entire Length Of Bed. 8. High-strength Carbon Steel Structure And Spray Procedure: The High Quality Carbon Steel And Robot Welding Guarantee The Mechanical Strength. The Spray Surface Treatment Is Easy To Clean And Guarantees A Longer Life Or Equivalent. 9. Rapid Lifting Hydraulics: The Imported Dual-pressure Lifting System Can Be Used To Quickly Lift The Bed Or The Push Handle For 2 Seconds In An Emergency, And The Bed Will Automatically Locate The Height To Form A Special Body Position Of The Patient. 10. X-ray Imaging: Equipped With X-ray Material Bed Surface And X Ray Cassette Holder, The Whole Body Can Be X-rayed. 11. With Oxygen Cylinder Holder. Warranty -1 Year From Delivery And Installation. Unit 18 5,400,000.00 29 Suction Machine. (heavy Duty). Brand New. Product Specifications: Floor, Standing Type. Oil-less Piston Suction Motor. Double Anti-overflow Protection (mechanical Float And Electronic Sensor). Flow Rate: 40-50 Liter Per Minute. Water Displacement. Vacuum -700-800mmhg. Includes 2x3 Liters Polycarbonate Collection Jar. Attach/detach Abs Plastic Cover Jar. Anti-bacterial And Hydrophobic Filter. Patented Anti-vibration System. Dimensions: 300-400mm X 380-420mm X 800-850mm (lxwxh). Weight -15-25 Kg. Equipped With Foot Switch. Power -250w. Power Requirement -ac 200, 50-60hz. Silicone Hose. Operation And Service Manual Included. Warranty Of 6 Months From Delivery And Installation. Includes Orientation And Training Of End-user Staff. Unit 2 600,000.00 30 Syringe Pump. Brand New. Product Specifications: With Delivery And Installation, Provision Of Trainings Of Staff With Certificates, And Manual.  Applicable Syringes (universal Compatibility To Various Brands): 10ml, 20ml, 30ml, 50ml/60ml, Accuracy: ±2% (mechanical ±1%).  Flow Rate: 10ml: 0.1 Ml/h -300ml/h, 20ml: 0.1 Ml/h -600ml/h, 30ml: 0.1 Ml/h -900ml/h, 50ml: 0.1 Ml/h -1500ml/h.  Bolus Rate: 10ml: 100-300ml/h (default 300ml), 20ml: 100-600ml/h (default 600ml), 30ml: 100-900ml/h (default 900ml), 50ml: 100-1500ml/h (default 1500ml).  Purge Rate: 10ml: 300ml, 20ml: 600ml, 30ml: 900ml, 50 Ml: 1500ml.  Volume To Be Infused: 0.1ml~1000ml.  Injection Increment: 0.1ml.  Infusion Mode: Rate Mode, Time Mode.  Time Mode: Volume Limit: 0.1~999.9ml. Pre-set Time: 1min To 99h99min. Remaining Time: **h **min.  Occlusion Pressure: 3 Adjustable Occlusion Pressure Settings: Low, Middle And High.  Alarm Function: Infusion Completion, Near Completion, Empty, Occlusion, Low Battery, Syringe Disengaged, Incorrect Installation Of Syringe Plunger, No Ac Power Supply, Low Battery, Battery Exhausted, Malfunction Etc.  Battery: Rechargeable Lithium Polymer Battery, 7.4v, 2100mah, Can Operate For More Than 3 Hours After Fully Charged At 25ml/h. Unit 5 300,000.00 Total 34,665,000.00 Note: Winning Bidder Shall Conduct Product Demonstration/end-user’s Training Of The Actual Unit And Issue Training Certificate To The End-user And Medical Equipment Technician Of Wvsgh. The Bidder’s Single Largest Completed Contract Similar To The Contract To Be Bid Should Have Been Completed Within 3 Years From The Date Of The Deadline Of Submission And Receipt Of Bids, Award For This Contract Should Have Been Awarded By A Hospital Or Health Facility And Not By Another Supplier, Except For Line Items With Asterisk (*) Which Have Been Awarded By A Non-health Facility. Likewise, The Contract Price Of The Slcc Should Be At Least 50% Of The Sum Of The Abc Of The Line Items Joined. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Interested Bidders May Join The Pre-bid Conference And Opening Of Bids Virtually Via Google Meet In The Link Provided: Meet.google.com/deb-mcrk-wqm. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184. The Complete Schedule Of Activities Is As Follows: Bac Activities Schedule Availability Of Bidding Documents January 16, 2025 At 8:00 Am To 4:00 Pm And Up To Before 9:00 Am Of February 5, 2025, At The Procurement/bac Office, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Pre Bid Conference January 24, 2024 (friday), 9:00 Am At The 3rd Floor, Im Conference Room, New Building, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Opening Of Bids February 5, 2025 (wednesday), 9:00 Am At The 3rd Floor, Im Conference Room, New Building, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Bid Documents May Be Acquired By Interested Bidders On The Dates And Address Above And Upon Payment Of Applicable Fee For The Bidding Documents In The Amount Of: Php 25,000.00 Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bac/procurement Office On Or Before 9:00 Am Of February 5, 2025. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Wvs.doh.gov.ph , Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Western Visayas Sanitarium And General Hospital Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Mr. Jasond Rex A. Huyaban/jessie H. Jarbadan Bac Secretariat Western Visayas Sanitarium And General Hospital Sta. Barbara, Iloilo Tel. No.: (033) 332-4778 Loc. 119 Email: Wvsbac.procurement@gmail.com Website: Wvs.doh.gov.ph Renia Grace G. Salapare, Md, Fpafp, Mpa Bac Chairperson

Details: Request For Information (rfi) subject: Inspection, Preventive Maintenance And Emergency Repairs/replacement Services For The Emergency Power Supply Systems (epss) For The Chemical Biological Center (cbc) Located At Aberdeen Proving Ground - Edgewood Area, Md, 21010 this Is A Request For Information (rfi) Only – This Rfi Is Issued Solely For Information And Planning Purposes. This Is Not A Request For Proposals (rfp) Or A Request For Quotations (rfq); It Is Strictly A Rfi. Neither Unsolicited Proposals Nor Any Other Kinds Of Offers Will Be Considered In Response To This Rfi. No Contract Will Be Awarded Pursuant To This Announcement. This Notice Does Not Constitute A Commitment By The United States Government To Contract For Any Supply Or Service Whatsoever. All Information Submitted In Response To This Announcement Is Voluntary; The United States Government Will Not Pay For Information Requested Nor Will It Compensate Any Respondent For Any Cost Incurred In Developing Information Provided To The United States Government. Not Responding To This Rfi Does Not Preclude Participation In Any Future Rfp Or Rfq, If Any Is Issued. 1.0 Disclaimer: This Rfi Is Issued Solely For Market Research Information And Planning Purposes And Does Not Constitute A Solicitation. Neither Unsolicited Proposals Nor Any Other Kind Of Offers Will Be Considered In Response To This Rfi. Responses To This Notice Are Not Offers And Will Not Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Associated With Responding To This Rfi. All Information Received In Response To This Rfi That Is Marked Proprietary Will Be Handled Accordingly. Responses To The Rfi Will Not Be Returned. At This Time, Questions Concerning The Composition And Requirements For A Future Rfp Will Not Be Entertained. 2.0 Subject: The Cbc Is Conducting Market Research To Assess The Commercial Availability Of Inspection, Preventive Maintenance And Emergency Repairs/replacement Services For Their Epss’. the Anticipated North American Industry Classification System Code (naics Code) Is 811210 (electronic And Precision Equipment Repair And Maintenance). in Response To This Sources Sought Notice, Please Provide The Following: do You Have The Capabilities To Perform The Work Required For This Effort? is Your Company Classified As A Large Or A Small Business? are There Any Concerns You Foresee With This Requirement? responses To This Notice Shall Be Submitted Via Email To Michele A. Connolly At Michele.a.connolly.civ@army.mil. Telephone Responses Will Not Be Accepted. Responses Must Be Received No Later Than Friday, January 31, 2025, At 4:30pm Est. If A Solicitation Is Issued, It Shall Be Announced At A Later Date, And All Interested Parties Must Respond To That Solicitation Announcement Separately From The Responses To This Sources Sought. Responses To This Sources Sought Notice Are Not A Request To Be Added To A Prospective Bidders List Or To Receive A Copy Of The Solicitation. 3.0 Description: This Is A Non-personal Services Contract To Provide Routine Inspections, Maintenance, Operational Testing, Repairs, Replacement And Emergency Service Response For The Emergency Power Supply Systems (epss) At Combat Capabilities Development Command (devcom), Chemical Biological Center (cbc) Aberdeen Proving Ground, Md. The Contractor Will Provide All Services In Accordance With (iaw) National Fire Protection Association (nfpa) 110, Most Recent Version, For Level 1, 2 And 3 Equipment, Tm 5-685, National Electrical Code (nec)/nfpa 70 And Manufacturer’s Published Procedures. A Current List Of All Equipment To Be Maintained As Part Of The Epss Is Included In Attachment A – Master Generator Equipment Listing. There Are Currently (35) Systems In Place Requiring Service. 3.1general Requirements: The Contractor Shall Perform Provide Routine Inspections, Maintenance, Operational Testing, Repairs, Replacement And Emergency Service Response This Includes All Labor, Materials, Consumables, And Equipment Necessary To Accomplish The Contract Requirements Required To Successfully Complete The Inspection, Maintenance And Repairs, For The Continued Operation Of Cbc’s Epss’. ​​​​​​​3.2technical Qualifications. The Contractor Shall Be Qualified In The Maintenance And Repair Of The Types Of Emergency Power Supply Systems (epss) Used In Research Laboratories, Hospitals Or Large-scale Medical Facilities, Specifically All Makes/models Listed In Attachment A – Master Generator Equipment Listing. The Contractor Shall Have The Ability To Provide Twenty-four (24) Hour Service And Have A Response Time For Emergency Calls Of No Less Than 2 Hours . The Contractor Shall Provide Proposed Communication Procedures With Phone Numbers And Emails Of Both Primary And Secondary Contacts And Answering Machines With Instructional Messages/ Voicemail Will Not Be Acceptable. The Contractor Shall Submit Satisfactory Manufacturer Or General Certification Of Personnel Training For Manufacturers Listed In Attachment A – Master Generator Equipment Listing. All Technicians Performing Services On This Contract Must, At A Minimum, Maintain The Apprenticeship Level Certification Provided By The Electrical Generating Systems Association (egsa). All Journeyman Level Technicians Shall Maintain Journeyman Certification Obtained Through The Egsa, Have At Least Five (5) Years Of Experience On Any Of The Following Generators: Katolight, Kohler, Caterpillar, Cummins And/or Similar Commercial Generators And Shall Be Proficient In Programming And Troubleshooting Of Electronic Programmable Logic Controllers. At A Minimum, One Qualified Journeyman Must Be Onsite At All Times During Performance Of Pws Requirements. 3.3 Quality Assurance: The Government Will Evaluate The Contractor’s Performance Under This Contract In Accordance With The Quality Assurance Surveillance Plan (qasp). This Plan Primarily Focuses On What The Government Must Do To Ensure That The Contractor Has Performed In Accordance With Designated Performance Standards. The Qasp Defines How The Performance Standards Will Be Applied, The Frequency Of Surveillance, And The Minimum Acceptable Defect Rate(s). 3.3.1 Quality Control Plan (qcp) - Contractor Shall Develop And Maintain A Qcp To Ensure Services Are Performed In Accordance With (iaw) This Pws. The Contractor Shall Develop And Implement Procedures To Identify, Prevent, And Ensure Non-recurrence Of Defective Services. The Contractor's Qcp Is The Means By Which It Assures That The Work Provided Complies With The Requirements Of The Contract. The Qcp Shall Be Submitted To The Contracting Officer (ko) And Contracting Officer’s Representative (cor) Within 30 Days Of Contract Award. 3.4 Hours Of Operation. The Contractor Must Perform All Scheduled Work Under This Contract (including Meetings) During Normal Business Hours (0700 – 1630), Unless Requested By The Cor. . These Hours Can Be Augmented Or Adjusted As Required To Accommodate Scheduled System Outages During Low Demand Hours For Maintenance, Or To Make Repairs In The Event Of An Unscheduled Service Interruption. The Government Reserves The Right To Change Hours Of Operation Or Restrict Contractor Access. 3.5 Contractors Accessing A Dod Facility Or Installation. The Contractor Shall Ensure That All Personnel (including Subcontractors) Assigned To Perform Work Associated With The Tasks Described In This Pws Have Been Screened Through Standard Employment Background Checks. Contractor And All Associated Sub-contractors Employees Shall Comply With Adjudication Standards And Have A -tier I Investigation With Favorable Results. The Contractor Shall Provide Proof Of These Screenings Upon Request By The Cor. Some Epss’ May Be Located In A Secure Area That Requires Escort. 4.0 Performance Requirements. 4.1 Inspection, Preventative Maintenance And Operational Testing. All Routine Maintenance And Operational Testing Shall Be Performed In Accordance With The Standards Of Nfpa 110 As Well As Manufacturer’s Recommendations, Instruction Manuals And The Authority Having Jurisdiction. A Maintenance Schedule For All Epss Equipment Included In This Contract Is In Attachment B – Epss Schedule. This Document Details All Requirements To Be Completed During Inspection, Preventative Maintenance And Operational Testing For All Epss’. Maintenance Schedules Shall Be Adhered To And Shall Follow The Published Intervals For Level 1 And 2 Equipment, To Include Monthly, Quarterly, Semi-annual And/or Annual Work. 4.1.1 Exercising Under Load. All Epss’s In Service Shall Be Exercised For A Minimum Of (30) Minutes, Using One Of The Following Methods: 4.1.1.1 Loading That Maintains The Minimum Exhaust Gas Temperatures As Recommended By The Manufacturer. 4.1.1.2 Under Operating Temperature Conditions And At Not Less Than 30 Percent Of The Eps Standby Nameplate Kw Rating Equivalent Loads (load Banks) Used For Testing Shall Be Automatically Replaced With The Emergency Loads In Case Of Failure Of The Primary Source. 4.1.2 Transfer Switches (ats). Transfer Switches Shall Be Operated Monthly Iaw Nfpa 110, 8.4.6.1. The Contractor Shall Also Perform Semi-annual Maintenance And Testing Of The Ats To Include The Following Operations: 4.1.2.1 Checking Of Connections 4.1.2.2 Inspection Of Testing For Evidence Of Overheating And Excessive Contact Erosion 4.1.2.3 Removal Of Dust And Dirt 4.1.2.4 Replacement Of Contacts, When Required. 4.2 Repairs, Emergency Service And Replacement Parts. The Contractor Shall Be Responsible For Any Repairs Needed On Any Piece Of Equipment Listed In Attachment A Throughout The Period Of Performance Of This Contract. All Repair Work Must Be Done Iaw Nfpa 110 For Level 1, 2 And 3 Equipment, Tm 5-685, Nec/nfpa 70, And Manufacturer Recommendations. Any Repair/replacement Required Outside Of The Normal Maintenance And Repair Identified In Attachment B Epss Maintenance Schedule, Must Be Submitted To And Approved By The Contracting Officer’s Representative (cor), Via A Quote, In Advance Of Any Work Being Executed. 4.3 Unscheduled Service And Repair Calls. These Calls Are Generally Routine Calls That Consist Of Correcting Failures, Which Do Not Immediately Impact Daily Operations. The Contractor Shall Be On Site To Troubleshoot And Diagnose The Problem Within (12) Hours Of Notification. 4.4 Emergency Service And Repair Calls. Emergency Calls Consist Of A Failure During An Exercise Or During An Actual Utility Power Outage. Failures Will Impact Daily Operations And/or Critical Mission Requirements, And The Contractor Shall Be On Site To Troubleshoot And Diagnose The Problem Within (2) Hours Of Emergency Notification. 4.5 Emergency Re-fueling And Delivery. In An Emergency Situation, Such As During A Weather Event Or If Apg Department Of Public Works (dpw) Supply Is Depleted Or Cannot Provide Fuel In Time To Keep Equipment Running, The Contractor Shall Provide All Necessary Services, Equipment, Personnel, Delivery Services And Materials Required To Provide Diesel Fuel Delivery. These Services Can Occur 24x7 During Normal Business Periods And During Catastrophic Or National Disasters. 4.6 Backup Generators. The Contractor Must Have At Least (2) Portable Generators Available At All Times, To Use As Temporary Replacements Should An Epss Included On This Contract Be Placed Out Of Service. 4.7 Emergency Replacement Of Existing Generators. The Contractor Should Supply And Install All Components, Materials, And Labor Required To Replace Any Of The Existing Generators Covered Throughout This Pws, As Needed Should It Be Deemed Irreparable. This Includes Automatic Transfer Switches, Backup Emergency Generators And Fuel Tanks. This Includes All Electrical Mechanical, Civil And Permitting Work Needed To Properly Install The Generator According To State And Local Codes. Equipment Shall Be Installed According To Manufacturer's Instructions. Installation Of The Unit Shall Be Performed By Licensed Electricians And Other Certified Installers. The Contractor Shall Make All Connections To The Building's Panel Boxes, Required Interfaces With The Electrical Company And Provide Any/all Enhancements Or Updates To The Electrical Lines. The Proposed Installation Must Comply With Local, State, And Federal Regulations For Permanent Mount Emergency Generators And Adhere To All Applicable National Electrical Codes ("nec"), And National Fire Protection Association ("nfpa") Codes. The Contractor Must Also Coordinate With Local Power Company, Currently City, Light & Power For All Outages Needed To Complete The Work. 4.7.1 The Contractor Shall Provide All Labor And Materials Necessary To: (a) Remove And Reconnect Feeder For Temporary Generator And Prepare For New Generator. This Shall Include Supplying And Hooking Up Emergency Power Generator For Temporary Connection Until Completion Of Installation And Satisfactory Load Bank Run Of New Generator. (b) Remove Old Generator And Appurtenances To Include Removal Of The Existing Concrete Slab And Appurtenances If Existing Site Is Determined To Not Be Reuseable. (c) In The Instance Where The Current Pad Site Is Determined To Be Unusable For Direct Replacement, The Contractor Shall Install A New Concrete Pad To Accommodate The New Generator Per Set Manufacturer’s Specifications. The Contractor Shall Follow All Local And Installation Permitting Requirements To Obtain All Required Permits. (d) The Contractor Will Install The New Generator And Set-up Mounting(s) Per Manufacturer’s Specifications. The Contractor Shall Connect Generator Start Circuit, Battery Charger And Sump Heater, As Applicable, To Nearest Available Power Supply; Connect Fuel Supply To New Generator; Verify Installation And Perform Start-up Checks, Transfer And Load Bank Testing To Ensure Proper Operation Of All Electrical And Mechanical Components. Contractor Is Responsible For Clearing All Work Debris And Material From Removal/installation Sites And Disposing It Properly. (e) If Applicable, The Contractor Will Install And Disconnect Any Government Furnished Temporary Emergency Generator. The Contractor Shall Include The Cost Of Connection/disconnection Of A Temporary Furnished Generator. Generator Shall Be Set Up And Tied Into Existing Emergency Feeds And Automatic Start Circuit. 4.7.2 Excavation Clearances: Contractor Shall Obtain An Excavation Permit (ep) From The Construction Branch Of Dpw Before Starting Any Excavation Work. The Contractor Shall Initiate The Permit Process By Filling Out The “excavator Section” Of The Ep, And Submit Through Inframap Located In The Basement Of Building 4304. Processing Will Normally Require Ten (10) Working Days. The Contractor Shall Also Obtain Digging Clearance Through “miss Utility” To Check For The Existence Of Private Commercial Utilities Prior To Any Excavation. 4.8 Installation Of Green Strobe Generator Status Lights. The Contractor Shall Supply And Install A Green Strobe Light That Signals The Generator’s Operating Status Near Or On Each Individual Generator That Indicates The Generator Is Operational. These Installations Shall Be Completed Using A Phased Approach Approved By The Government Cor During The Base Year Of This Contract. The Contractor Shall Submit Their Phased Installation Plan To The Cor For Approval Within 30 Days Of Contract Award. 4.9 Records. The Contractor Shall Provide And Maintain All Records Both Electronically And On-site, With Log Books At Each System That Are Updated Once Any Actions Are Taken, E.g. Inspections, Operational Tests, Exercising, Repairs, And Modifications. If Required, Repair Or Replacement Quotes Shall Be Submitted Within Five (5) Business Days To The Cor Upon Discovery Of Need. 4.10 Quotes: Any Repair/replacement Beyond What Is Covered In The Standard Maintenance And Repair Sections Of This Contract Require A Quote Be Submitted And Pre-approved By The Cor, Prior To Commencement Of Any Work Being Performed. if A Repair/replacement Part Is Required And Has The Ability To Impact Mission, The Cor Shall Be Provided A Quote For The Total Cost Broken Down By Labor Time, Parts And Materials Within (8) Hours Of The Discovered Issue. In The Event That A Repair/replacement Part Is Required, And It Will Not Impact Mission, The Cor Must Be Provided A Total Quote For Time And Materials Within (48) Hours Of The Discovered Issue. 4.11 Record Of Maintenance, Repair And/or Operational Testing. Records Are Required To Be maintained Via A Digital Logbook Maintained By The Contractor. The Digital Log And Copies Of Inspection Maintenance Sheet(s) Shall Be Submitted By The 10th Of Each Month To The Cor. 4.12 Operational Readiness Report. Contractor Shall Provide A Monthly Operational Readiness Report Stating The Current Condition Of Each Emergency Power Supply System (epss) Included In The Contract. Report Shall Be Submitted By The 10th Of Each Month And Shall Be Furnished To The Cor And Building Facility Managers. A Full List Of Building Facility Managers Will Be Provided Upon Task Order Award.

Details: This Announcement Is Not A Request For Proposal. The Government Will Not Pay Nor Reimburse Any Costs Associated With Responding To This Request. The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. the Department Of Veterans Affairs Is Seeking A Qualified Architect-engineering (ae) Firm To Provide Schematics, Design Development, Construction Documents, Technical Specifications, Construction Period Services, Site Visits, Cost Estimates, As-built Documentation, And All Other Related Information For Project 526-23-107 Replace Domestic Water Distribution System Phase 2 (a/e) At The James J. Peters Vamc, Bronx, New York. This Project Seeks The Expertise Of An Architectural Engineering Firm To Design A State-of-the-art Hot Water Heater System, Design For Construction To Install New Sections Of Water Main Pipes And Conduct A Comprehensive Survey Of The Existing Water Main System At The James J. Peters Va Medical Center, 130 West Kingsbridge Road, Bronx, New York 10468. this Requirement Is Being Procured In Accordance With The Brooks Act As Implemented In Far Subpart 36.6. Applicable Naics Code Is 541330 And Small Business Size Standard Of $25.5m. Magnitude Of Construction Is Between $5,000,000.00 And $10,000,000.00. This Is A 100% Service-disabled Veteran Owned Small Business Set Aside. The Anticipated Award Date Of The Proposed A-e Contract Is On Or Before April 15, 2025. Potential Contractors Must Be Registered In Sam (www.sam.gov ) And Are Visible/verified/certified As Sdvosb In Veterans Small Business Certification (https://veterans.certify.sba.gov/ ) At Time Of Submission Of Their Qualifications In Order To Be Considered For An Award. in Order To Assure Compliance With Vaar Clauses, 852.219-75 Va Notice Of Limitations On Subcontracting Certificate Of Compliance For Services And Construction (nov 2022) And 852.219-73 Va Notice To Total Set-aside For Verified Service-disabled Veteran-owned Small Businesses (nov 2022), All Firms Submitting A Sf 330 For This Notice Are Required To Indicate What Percentage Of The Cost Of Contract Performance Will Be Expended On The Concerns Employees And In Which Discipline(s) And Percentage Of Cost Of Contract Performance To Be Expended (and In What Disciplines) By Any Other Consultant/subcontractor Or Otherwise Used Small Or Large Business Entity(s). Any Consultant/subcontractor Or Otherwise Business Entity(s) Used Must Be Identified By Name, Office Location And Size/type Of Business (i.e., Sdvosb, Vosb, 8(a), Small, Large, Etc.). Failure To Provide This Information Will Deem The Firm S Sf 330 Submittal As Nonresponsive And Preclude Further Evaluation. all A/e Firms Are Advised That In Accordance With Vaar 836.606-71 The Total Cost Of The Production And Delivery Of Designs, Plans, Drawings And Specifications Shall Not Exceed Six (6) Percent Of The Estimate Cost Of Construction. Other A-e Fees Are Not Included In The Six (6) Percent. Additionally, Far Clause 52.236-22 (c) - Design Within Funding Limitation, Will Be Applicable To This Procurement Action. scope Of Service Required 526-23-107. See The Attached Statement Of Work. x. Location bronx Va Medical Center. cost Range estimated Construction Cost Range: Between $5,000,000.00 And $10,000,000.00. type Of Contract Contemplated the Department Of Veterans Affairs Is Contemplating Awarding A Firm Fixed Price Contract. design Completion Period: The Department Of Veterans Affairs Requires Design And Contract Support Services. The A/e Shall Deliver 100% Bid Documents In Accordance With The Ae Design Schedule From The Issuance Of The Notice To Proceed (ntp). selection Criteria Descriptions the Selection Criteria Descriptions Are Provided Below. professional Qualifications Necessary For Satisfactory Performance Of Required Services. provide Brief Resumes Of Proposed Team Members Who Will Specifically Serve As The Project Managers And Designers Of Record Proposed For This Project Only. Include Specific Experience And Qualifications (i.e., Education, Training, Registration, Certifications, Overall Relevant Experience, And Longevity With The Firm). The Designers Of Record Shall Perform And Direct The Design Within Their Respective Discipline And Shall Sign And Seal The Drawings. The Lead Designer In Each Discipline Must Be Registered But Does Not Have To Be Registered In The Particular State Where The Project Is Located. specialized Experience And Technical Competence specialized Experience And Technical Competence Required For This Specific Project, Including, Where Appropriate, Experience In Energy Conservation, Pollution Prevention, Waste Reduction, And The Use Of Recovered Materials. capacity this Factor Evaluates The Ability Of The Firm, Given Their Current Projected Workload And The Availability Of Their Key Personnel, To Accomplish The Possible Myriad Of Design Projects In The Required Time. the General Workload And Staffing Capacity Of The Design Office Will Be Evaluated. list Current Projects With A Design Fee Of Greater Than $20,000 Being Designed In The Firms Office. indicate The Firms Present Workload And The Availability of The Project Team (including Sub-consultants) For The Specified Contract Performance Period; describe Experience In Successfully Delivering Projects Per performance Schedule, Providing Timely Construction Support, And Successfully Completing Multiple Projects With Similar Delivery Dates past Performance: Visn2 Will Evaluate Past Performance On Recent And Relevant Contracts With Government Agencies (emphasis On Va Work) And Private Industry In Terms Of Cost Control, Quality Of Work, Compliance With Performance Schedules And A Record Of Significant Claims Against The Firm. recent Is Defined As Performance Occurring Within Five (5) Years Of The Date Of This Sources Sought, Except Those Ongoing Projects Must Have Begun No Less Than One (1) Year Prior To The Issuance Of This Sources Sought. relevancy Is Defined As Performance Of Work On Projects That Are Similar In Scope Within A Va Hospital Setting In Relation To The Type Of Projects Anticipated Under The Resultant Contracts. respondents With No Previous Past Performance Shall State This When Addressing The Selection Criteria. Where There Is No Record Of Past Performance, The Proposal Will Be Evaluated Neither Favorably Nor Unfavorably. Superior Performance Ratings On Relevant Projects May Be Considered More Favorably In The Evaluation. location In The General Geographical Area Of The Project And Knowledge Of The Locality Of The Project; Provided, That Application Of This Criterion Leaves An Appropriate Number Of Qualified Firms, Given The Nature And Size Of The Project to Be Rated Acceptable For This Evaluation Factor, The A/e Firm Must Be Within 450 Miles From The Prime Contractor S Main Office Or Official Satellite Office To The James J. Peters Va Medical Center, Bronx, Ny 10468 this Distance Is Determined According To Http://maps.google.com/ this Factor Evaluates The Distance The Ae Firm's Design Office Or Official Satellite Office(s) From The Location Of Work (va Medical Center). Please Provide The Address (es) And Distance Of Your Closest Office To The Address Listed In Iv. Above. the Extent To Which Potential Contractors Identify And Commit To The Use Of Service-disabled Veteran-owned Small Businesses, Veteran-owned Small Businesses, And Other Types Of Small Businesses As Subcontractors. experience In Construction Period Services To Include Professional Field Inspections During The Construction Period, Review Of Construction Submittals, Support In Answering Requests For Information During The Construction Period, And Support Of Construction Contract Changes To Include Drafting Statements Of Work, And Cost Estimates Shall Be Included As An Evaluation Criterion When Construction Period Services Is Included In The Statement Of Work For A-e Services. please Note: The Ae Evaluation Board Must Be Provided With Complete And Accurate Information For All Seven (7) Evaluation Factors Above In Order To Rank As Qualified And Eligible Firms. Therefore, The Ae Firm Must Expand Upon, As It Deems Necessary, On Any Evaluation Factor Not Well Demonstrated Or Addressed With Part 1a To Part Ig And Part Ii Of The Sf330. The Ae Firm Shall Use Part Ih And/or Use Additional Sheets To Supplement/address All Evaluation Factors To Clearly Demonstrate Its Qualifications. limitations 852.219-73 Va Notice To Total Set-aside For Verified Service-disabled Veteran-owned Small Businesses (nov 2022) (a) Definition. For The Department Of Veterans Affairs, Service-disabled Veteran-owned Small Business Concern Or Sdvosb : (1) Means A Small Business Concern - (i) Not Less Than 51 Percent Of Which Is Owned By One Or More Service-disabled Veterans Or, In The Case Of Any Publicly Owned Business, Not Less Than 51 Percent Of The Stock Of Which Is Owned By One Or More Service-disabled Veterans Or Eligible Surviving Spouses (see Vaar802.101, Surviving Spouse Definition); (ii) The Management And Daily Business Operations Of Which Are Controlled By One Or More Service-disabled Veterans (or Eligible Surviving Spouses) Or, In The Case Of A Service-disabled Veteran With Permanent And Severe Disability, The Spouse Or Permanent Caregiver Of Such Veteran; (iii) The Business Meets Federal Small Business Size Standards For The Applicable North American Industry Classification System (naics) Code Identified In The Solicitation Document; (iv) The Business Has Been Verified For Ownership And Control Pursuant To 38 Cfr Part 74 And Is Listed In Va's Vendor Information Pages (vip) Database At Https://www.vetbiz.va.gov/vip/; And (v) The Business Will Comply With Vaar Subpart 819.70 And Small Business Administration (sba) Regulations Regarding Small Business Size And Government Contracting Programs At 13 Cfr Parts 121 And 125, Provided That Any Reference Therein To A Service-disabled Veteran-owned Small Business Concern Or Sdvo Sbc, Is To Be Construed To Apply To A Va Verified And Vip-listed Sdvosb, Unless Otherwise Stated In This Clause. (2) The Term Service-disabled Veteran Means A Veteran, As Defined In 38 U.s.c. 101(2), With A Disability That Is Service-connected, As Defined In 38 U.s.c. 101(16). (3) The Term Small Business Concern Has The Meaning Given That Term Under Section 3 Of The Small Business Act (15 U.s.c. 632). (4) The Term Small Business Concern Owned And Controlled By Veterans With Service-connected Disabilities Has The Meaning Given The Term Small Business Concern Owned And Controlled By Service-disabled Veterans Under Section 3(q)(2) Of The Small Business Act (15 U.s.c. 632(q)(2)), Except That For A Va Contract The Firm Must Be Listed In The Vip Database (see Paragraph (a)(1)(iv) Of This Clause). (b) General. (1) Offers Are Solicited Only From Vip-listed Sdvosbs. Offers Received From Entities That Are Not Vip-listed Sdvosbs At The Time Of Offer Shall Not Be Considered. (2) Any Award Resulting From This Solicitation Shall Be Made To A Vip-listed Sdvosb Who Is Eligible At The Time Of Submission Of Offer(s) And At The Time Of Award. (3) The Requirements In This Clause Apply To Any Contract, Order Or Subcontract Where The Firm Receives A Benefit Or Preference From Its Designation As An Sdvosb, Including Set-asides, Sole Source Awards, And Evaluation Preferences. (c) Representation. Pursuant To 38 U.s.c. 8127(e), Only Vip-listed Sdvosbs Are Considered Eligible To Receive Award Of A Resulting Contract. By Submitting An Offer, The Prospective Contractor Represents That It Is An Eligible Sdvosb As Defined In This Clause, 38 Cfr Part 74, And Vaar Subpart 819.70. (d) Agreement. When Awarded A Contract Action, Including Orders Under Multiple-award Contracts, An Sdvosb Agrees That In The Performance Of The Contract, The Sdvosb Shall Comply With Requirements In Vaar Subpart 819.70 And Sba Regulations On Small Business Size And Government Contracting Programs At 13 Cfr Part 121 And Part 125, Including The Non-manufacturer Rule And Limitations On Subcontracting Requirements In 13 Cfr 121.406(b) And 13 Cfr 125.6. Unless Otherwise Stated In This Clause, A Requirement In 13 Cfr Parts 121 And 125 That Applies To An Sdvo Sbc, Is To Be Construed To Also Apply To A Vip-listed Sdvosb. For The Purpose Of Limitations On Subcontracting, Only Vip-listed Sdvosbs (including Independent Contractors) Shall Be Considered Eligible And/or Similarly Situated (i.e., A Firm That Has The Same Small Business Program Status As The Prime Contractor). An Otherwise Eligible Firm Further Agrees To Comply With The Required Certification Requirements In This Solicitation (see 852.219-75 Or 852.219-76 As Applicable). These Requirements Are Summarized As Follows: (1) Services. In The Case Of A Contract For Services (except Construction), The Sdvosb Prime Contractor Will Not Pay More Than 50% Of The Amount Paid By The Government To The Prime For Contract Performance To Firms That Are Not Vip-listed Sdvosbs (excluding Direct Costs To The Extent They Are Not The Principal Purpose Of The Acquisition And The Sdvosb/vosb Does Not Provide The Service, Such As Airline Travel, Cloud Computing Services, Or Mass Media Purchases). When A Contract Includes Both Services And Supplies, The 50 Percent Limitation Shall Apply Only To The Service Portion Of The Contract. (2) Supplies/products. (i) In The Case Of A Contract For Supplies Or Products (other Than From A Non-manufacturer Of Such Supplies), The Sdvosb Prime Contractor Will Not Pay More Than 50% Of The Amount Paid By The Government To The Prime For Contract Performance, Excluding The Cost Of Materials, To Firms That Are Not Vip-listed Sdvosbs. When A Contract Includes Both Supply And Services, The 50 Percent Limitation Shall Apply Only To The Supply Portion Of The Contract. (ii) In The Case Of A Contract For Supplies From A Non-manufacturer, The Sdvosb Prime Contractor Will Supply The Product Of A Domestic Small Business Manufacturer Or Processor, Unless A Waiver As Described In 13 Cfr 121.406(b)(5) Has Been Granted. Refer To 13 Crf 125.6(a)(2)(ii) For Guidance Pertaining To Multiple Item Procurements. (3) General Construction. In The Case Of A Contract For General Construction, The Sdvosb Prime Contractor Will Not Pay More Than 85% Of The Amount Paid By The Government To The Prime For Contract Performance, Excluding The Cost Of Materials, To Firms That Are Not Vip-listed Sdvosbs. (4) Special Trade Construction Contractors. In The Case Of A Contract For Special Trade Contractors, No More Than 75% Of The Amount Paid By The Government To The Prime For Contract Performance, Excluding The Cost Of Materials, May Be Paid To Firms That Are Not Vip-listed Sdvosbs. (5) Subcontracting. An Sdvosb Must Meet The Naics Size Standard Assigned By The Prime Contractor And Be Listed In Vip To Count As Similarly Situated. Any Work That A First Tier Vip-listed Sdvosb Subcontractor Further Subcontracts Will Count Towards The Percent Of Subcontract Amount That Cannot Be Exceeded. For Supply Or Construction Contracts, The Cost Of Materials Is Excluded And Not Considered To Be Subcontracted. When A Contract Includes Both Services And Supplies, The 50 Percent Limitation Shall Apply Only To The Portion Of The Contract With The Preponderance Of The Expenditure Upon Which The Assigned Naics Is Based. For Information And More Specific Requirements, Refer To 13 Cfr 125.6. (e) Required Limitations On Subcontracting Compliance Measurement Period. An Sdvosb Shall Comply With The Limitations On Subcontracting As Follows: _x_by The End Of The Base Term Of The Contract Or Order, And Then By The End Of Each Subsequent Option Period; Or __by The End Of The Performance Period For Each Order Issued Under The Contract. (f) Joint Ventures. A Joint Venture May Be Considered Eligible As An Sdvosb If The Joint Venture Is Listed In Vip And Complies With The Requirements In 13 Cfr 125.18(b), Provided That Any Requirement Therein That Applies To An Sdvo Sbc Is To Be Construed To Apply To A Vip-listed Sdvosb. A Joint Venture Agrees That, In The Performance Of The Contract, The Applicable Percentage Specified In Paragraph (d) Of This Clause Will Be Performed By The Aggregate Of The Joint Venture Participants. (g) Precedence. The Va Veterans First Contracting Program, As Defined In Vaar 802.101, Subpart 819.70, And This Clause, Takes Precedence Over Any Inconsistencies Between The Requirements Of The Sba Program For Sdvo Sbcs, And The Va Veterans First Contracting Program. (h) Misrepresentation. Pursuant To 38 U.s.c. 8127(g), Any Business Concern, Including All Its Principals, That Is Determined By Va To Have Willfully And Intentionally Misrepresented A Company's Sdvosb Status Is Subject To Debarment From Contracting With The Department For A Period Of Not Less Than Five Years (see Vaar 809.406-2 Causes For Debarment). submission Requirements: unless Paper Offers Are Specifically Authorized In An Individual Solicitation, All Responses To Solicitations Must Be Submitted Electronically As Described Below.â  Responses Submitted In A Paper Form Are Unacceptable. Failure To Comply With This Requirement May Jeopardize The Possibility Of Receiving An Award Due To Noncompliance With The Submission Requirements. email Submission Requirements Interested Firms Having The Capabilities To Perform This Work Must Submit: One (1) Electronic Sf 330, Including Parts I And Ii, And Attachments (if Any) To Akkil.kurian@va.gov And Patricia.cordero@va.gov No Later Than 10:00am, Eastern Standard Time (est) On January 31, 2025. Submittals Received After The Date And Time Identified Will Not Be Considered. The Submittal Will Be Date And Time Stamped By The Microsoft Email System And Will Be The Official Record Of Receipt For The Submission. All Sf 330 Submissions Shall Be Clearly Indicated In Subject Line, Displaying The Solicitation Number And Project Number And Title (abbreviated And Shortened Is Okay). Submission Is To Be No More Than A Total Of Fifty (50) Pages; Size Of Emails Is Not To Exceed 10 Megabytes (mb). If More Than One Email Is Sent, Please Number Emails In Subject Line As 1 Of 2, 2 Of 2 Etc. all Sf 330 Submissions Must Include The Following Information Either On The Sf 330 Or By Accompanying Document: cover Page With Solicitation Number, Project Number And Title table Of Contents copy Of Valid State Registration For Each Lead Designer copy Of Current Https://veterans.certify.sba.gov/ Sdvosb/vosb Certification duns Number cage Code tax Id Number email Address And Phone Number (including The Area Code) Of The Primary Point Of Contact.

Details: Lot 14 - Heating and plumbing work, 2nd phase The aging vehicle hall at the Erkner city building yard is being expanded and renovated in two construction phases. The expansion was completed in the first construction phase this year and the building is currently being used provisionally over the winter in its shell form. In the coming year, the renovation of the existing building, the expansion and the energy renovation are to take place. The conversion enables adaptation to the current conditions of the building yard: larger garages, the division from one to two workshops, modern sanitary facilities and a high energy standard with insulation of the floor, the external walls and the roof, an air heat pump, a photovoltaic system and the renewal of the entire electrical system. The current list of services includes the sanitary and heating installation. The following services are to be provided in the area of sanitary installation: - Wastewater underground pipes under the floor slab - Drinking water pipe (supply) under the floor slab - Wastewater and drinking water pipes/insulation - Electric instantaneous water heater - Sanitary objects and pre-wall elements The following services are to be provided in the area of heating installation: - Underfloor heating in the floor slab --> laying on the middle reinforcement layer - Air-water heat pump 16 kW - Buffer storage 2000 litres - Heating element for using PV power to generate heat in the vehicle hall and in the administration building - Heating distribution 1.5 M³/h - Heating pipes/insulation The following services are to be provided in the area of ancillary work: - Excavation work for wastewater underground and drinking water pipes - Excavation work for heat pump foundation and connecting pipe between indoor/outdoor unit - Core drilling

Details: Description Republic Of The Philippines Province Of Sorsogon Municipality Of Irosin Bids & Awards Committee Invitation To Bid For Supply & Delivery Of Various Supplies & Materials For Dole Integrated Livelihood Program And Sustainable Industry Project 1. The Local Government Unit Of Irosin, Through The Trust Fund(dole) Intends To Apply The Sum Of Three Million Four Hundred Twenty Six Thousand One Hundred Thirty Six Pesos (p 3,426,136.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Supply & Delivery Of Various Supplies And Materials For Dole Integrated Livelihood Program And Sustainable Industry Project, Good-01-2025. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Name Of Contract : Supply & Delivery Of Various Supplies & Materials For Dole Integrated Livelihood Program And Sustainable Industry Project Brief Description: 4 Pcs Barber Brush: 23.3cmx7cm, Soft Fiber Material And Wooden Handle/4 Pcs Hair Clipper: Electric, 110v-240v, 50-60hz,all Metal Machine,led Light Display Stainless Steel Blade, Blade Width 45mm,low Noise High Power, 2000 Ma Lithium Battery, 210 Minutes Working Time,4pcs Comb Guide 3/6/10/13mm,body Size: 17x4cm, Body Weight: 371g,with Complete Accessories - Fiber Comb, Cleaning Brush, Lubricant, Charger/4 Pcs Paddle Brush:body Material: Wood, Dimensions: (lxwxh) 25x8x3cm, Brown/8pcs Spray Bottle: 250ml Plastic Hairdressing Spray Bottle/4pcs Hair Blower: 4000w Accurate Power,2-speed Settings (high & Low), 3 Temperature (cold, Hot & Hotter), Glossy, Thick Long Wires, With Light And Perfume Button/4pcs Hair Blower: 4000w Accurate Power,2-speed Settings (high & Low), 3 Temperature (cold, Hot & Hotter), Glossy, Thick Long Wires,with Light And Perfume Button/4pcs Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm,length: 20.9"/52cm,width: 14"/36cm,4 Drawers, Blower Holder/4pcs Talcum Powder: 200g, Hypo-allergenic, Dermatologist Tested/4 Pcs Cordless Clipper: Body Material: Aluminum,motor: Rotary,power/source Battery: Lithium-ion Battery (90+ Minutes Of Runtime), Blades: Titanium Blades, 3 Guide Combs Plastic Material (#1/2, #1, And #1½),cutting Lengths: 0.4-25mm,inclusions: A Blade Guard, 1 Recharging Transformer (charger), 1 Cleaning Brush, With Lubricating Oil Of At Least 5 Ml And English User Manual,product Dimension: Approximately 6.5-7" (l) X 2-3" (w),weight: Maximum Of 400g, Input: Can Be Used For 110-240 Voltage/4pcs Hair Trimmer: Running Time 120 Minutes Battery Powered, Rechargeable Li-ion Battery 1500 Mah, Dimension: Approximately 6-7" (l) X 1.5-2.5 (w), Material: Stainless,accessories: 4 Plastic Combs In Different Sizes 3mm, 6mm, 9mm, 12mm, Inclusions: 1 Recharging Transformer (charger) And 1 English User Manual, Input: Can Be Used For 110-240 Voltage/4pcs Electric Shaver: With 3d Floating Cutter Head, 40mins. Running Time For 8hrs Fully Charged, Material: Stainless Steel,product Dimension: Approximately 6.5-7" (l) X 2-3" (w),automatic Voltage 100-240v,battery: 2 Cell Nickel-metal Hydride Cylindrical Battery Pack, 4000mah,power Type: Rechargeable/4pcs Hair Shear: Material: Stainless Steel,1 Precision Scissor Approximately 6-7",1 Thinning Scissor Atleast 6",accesories: Scissors Oil Atleast 5ml/4 Pcs Razor Blades: 10pcs/box (double Edge Stainless)/4 Pcs Shaving Razor/labaha: Dimensions: Approximately 5-6" (l) X 3/4-1" (w), Material: Carbon Steel, Color: Black/ 4 Pcs Barber Skin Fade Brush: Handle: Wood, With Soft Bristles 1" (l),dimensions: Atleast 5.5" (l) X 1" (w)/4pcs Comb Set: (4pcs/set), Material: High Quality Plastic, Inclusions: #1-approx. Size: 4.88" (l) X 1.02" (w), #2-approx. Size: 7.09" (l) X 1.46" (w), #3-approx. Size: 7.87" (l) X 1.18" (w), #4-6.10" (l) X 0.20" (w)/4pcs Shaving Gel: (foam), 195g/4pcs Barber's Cape: Color: Black,about 140cm (l) X 110cm (w), Cloth: Polyester/4pcs 360 Degree Swivel Barber Chair: Classic Back Seat With Chrome Steel Base, Premium Steel Frame And High Class Foot Pump, Heavy Duty Leather Cover; Lower Height - At Least 51cm, Top Height - At Least 61cm, Sandles Height - At Least 40cm/8pcs Barber Apron: With Two Pockets, Waterproof, Material: Cotton And Acrylic, Item Size: Approx. 38-38.19" (l) X 27-27.36" (w)/ 4pcs Pomade: 80g, Water-based/26pcs Speed Square: Material: Cast Aluminum, Size: About 18x18x2cm/7.09x7.09x0.79", Weight: About 130g, Triangle-shaped/26pcs Meter Tape With Magnetic Hook: Blade Material, Nylon Coated Blade,dimensions: 16ft (l) X 25mm (w)/26pcs Circular Saw: Voltage: 220-240v, Frequency: 50-60hz, Input Power: 1400w, No-load Speed: Atleast 4800rpm, Blade Diameter: 185mm, Cutting Capacity: 45degree,44mm, 90 Degree: 65mm,maximum Cutting Depth: Atleast 90°62mm, Weight: Maximum Of 5.2kg,item Approximate Dimension: 15-17cm (h), 25-28cm (w), 30-35cm (l)/26pcs Angle Grinder: Rated Input Power: 730w, Wheel Diameter: 4", Rated Voltage: 220v,frequency: 60hz, No Load Speed: 12,000 Rpm, Weight: Approximately 1.6kg, Grinding Spindle Thread: M10, Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h )/26pcs Angle Grinder Cutting Disk: 10 Pcs. Per Set, Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8")/26 Pcs Portable Hand Drill: Power Sourced: Battery Powered - 2pc 21 Volt 1500mah Lithium-ion Batteries, Maximum Rotational Speed: 1500 Rpm, Voltage: 210v,amperage: 1.5 Amps, Chuck Size: 0.38",bit Heads Diameters: From 0.8mm-10mm,product Dimensions: ‎9.6" (l) X 2.1" (w) X 7.5" (h), Material: ‎plastic, Rubber, Metal, Item Dimensions: Approx. ‎9.6" (l) X 2.1" (w) X 7.5" (h),item Weight: Atleast ‎2.5 Pounds,item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Inspiritech Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws,1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag/26pcs Wood Planer: Rated Voltage: 220v, Rated Input Power: 600w, Cutting Width: 82mm, Load Speed: 15,000rpm, Frequency: 60hz, Weight: 3kg./26 Pcs Framing Hammer: Handle Material: Alloy Steel, Item Dimensions: Approximately 16-17" (l) X 5.75-6" (w) X 1.5-2" (h), Item Weight: Atleast 1.4 Pounds/26 Pcs Trim Hammer: Handle Material: Wood, Head Material: Alloy Steel; Item Dimensions Approximately: 14-15" (l) X 5-6"(w) X 1-2" (h),item Weight: Atleast 594 Grams/26pcs Roofing Hammer: Item Weight: ‎1.25 Pounds, Product Dimensions: Approx. 13.7" (l) X 6.75" (w) X 1.5" (h)/26 Pcs Chalk Line: Item Weight: 10.6 Ounces, Product Dimensions: ‎approx. 1200" (l) X 4.72" (w) X 5.91" (h) Inches, Color: ‎blue, Material Type: Alloy Steel, Rubber/26 Pcs Utility Knife: Handle Material: Aluminum, Material: Aluminum Alloy, Weight: 120g/pcs, Blade Size: 19mm (w) X 61mm (h) X 0.6mm (t),blade Material: Steel, Thickness: Atleast 0.6mm/26 Pcs Tin Snips: Item Weight: ‎atleast 1 Pound, Package Dimensions: Approx. 12.36" (l) X 3.7" (w) X 1.3" (h),size: ‎long Straight, 12 Inches Long, Blade Length: 3.20",material: Steel, Cutting Thickness Range Up To 1.2mm Carbon Steel And 0.7mm/26 Pcs Framing Square: Shorter Leg Measures At 8 Inch Outside And 6.5 Inch Inside, Longer Leg Measures At 12 Inch Outside And 11 Inch Inside,material: Carbon Steel/26 Pcs Level: Box Beam Style, Material: Aluminum,dimension: Approximately 24-24.5" (l) X 2-2.6" (w) X 1.2-1.5" (h), Weight: Atleast 0.8 Pounds/26 Pcs Electric Planer: Voltage: 220-240v,input Power: 1050w, No Load Speed: 1600rpm, Planing Width And Depth,82x3mm,heavy Duty Aluminum Base/1 Pc Meter Tape With Magnetic Hook: Blade Material: Nylon Coated Blade, Dimensions: 16ft (l) X 25mm (w)/1 Pc Air Compressor Machine: Motor Power: 1hp, Size: Approx. 935x385x800mm,voltage: 220-240v, 60hz, Speed: 3400 Rpm, Tank Capacity: 24l , Operating Pressure: Max 8 Bar, Air Displacement: 93l/min, Pump Lubricated With Oil/1 Pc Blue Painters Tape, Color: Blue, Size: Atleast 1.41" X 20m,thickness: 0.13mm, Item Weight: 1.92 Pounds, Material: Paper/2pcs Electric Spray Gun: Voltage: 220-240v~50/60hz,spraying Pressure: 0.1-0.2 Bar, Max Flow: 850ml/min, Max Viscosity: 50din-s, Container Capacity: Atleast 800ml,power Cord Length: 2m, Rated Power 500w, Spraying Pressure: Atleast 0.1-0.2bar, Item Dimensions: Approximately 13" (l) X 5" (w) X 11" (h)/1 Pc Extension Pole, (3 Stage Extender) Reach: 1.5-to-3ft,weight: Maximum Of 0.5 Pounds, Max. Standing Reach: 10ft, Material : Aluminum/2 Pcs Paint Brush Set, 5 Pcs/set, Material: Synthetic Bristle, Wood Handle, Overall Length: Atleast 11", Bristles Length: Atleast 3", Brush Width: 1", 1-1/2" 2", 2-2.5", 3"and 4"/ 5 Pcs Paint Roller, Material: Plastic,package Dimensions: Approximately 15.16" (l) X 11.22" (w) X 3.15" (h),item Weight: Atleast 1.06 Pounds, Inclusion: Roller, Atleast 7" In Length, Material: Polyester/2 Pcs Painters Gloves, 12 Pcs/pack, Material: Cotton, Color: Red/1 Pc Putty Knife/paint Scraper Set (4pcs), Stainless Steel Blade With Rubberized Handle, Blade Width: 1", 2" And 3", Length Including Handle: Approximately 8-9"/1 Pc Steel Float/plastering Trowel: Thickness: Atleast 0.7 Mm, Surface Measurement, Length: 12", Width: 4", Material: High Carbon Steel With Wood Handle/2 Pcs Lpg Tank With Gas Regulator And Accessories, Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/2 Pcs Kawali: Aluminum, (diameter X Height) 28cmx8cm With Double Handle/2 Pcs Food Warmer/chafing Dish: Rectangular, 2l Capacity, 6 Pcs In 1 Set Stainless Steel, No Side Handle, Glass Lid Cover With Handle, Dimensions: Same Sizes - 32cm (l) X 26cm (w) X 8cm (h)/2 Pcs Gas Range: Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h), 4-gas Burner, 62l Gas Oven, Button Ignition, Top Glass Lid, Net Weight: Maximum Of 28kg, Pan Support: Light Cast Iron Pan Support/2 Pcs Baking Sheet: Aluminum, 12x16 Inches/2 Pcs Digital Kitchen Scale: Accurate Measurement; Weigh Up To 5 Kg / 11 Lb Precisely In 1 G / 0.05 Oz Increments, Quality Material: Measure Food, Small Items, And Liquids With Confidence On The 304 Food-grade, Stainless Steel Platform, Approx. Dimension 7.3-7.5" (l) X 5.7-5.90" (w) X 0.6-08" (h), 2 X 1.5v Aaa Batteries/2 Pcs Measuring Cup (for Liquid Ingredients): 1 Measuring Cup With Red Graphics, Made Of Non-porous Glass That Won't Warp, Stain, Or Absorb Odors, Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe, Dimension: Approx. 7.13" (l) X 6.75" (w) X 4.38" (h), Measuring Capacity: 500ml/2 Pcs Measuring Cups (for Dry Ingredients): Material: Stainless Steel, 5 Pieces Per Set (1 Cup, 1/2 Cup, 1/3 Cup, 1/4 Cup, 1/8 Cup)/2 Pcs Measuring Spoons (set): 7pcs Stainless Measuring Spoon Kit, The Kit Includes: 1/8 Tsp (0.63ml), 1/4 Tsp (1.25ml), 1/2 Tsp (2.5ml), 3/4 Tsp (3.75ml), 1 Tsp (5ml), 1/2 Tbsp (7.5ml), 1 Tbsp (15ml)/2 Pcs Mixing Bowl: Medium, Approx. Diameter: 28cm, Height:11.2cm, Material: Stainless; Capacity: At Least 4l/2 Pcs Standmixer: 2-in-1 360 Automatic Rotating Bowl Electric Stand & Hand Mixer, 4.5l W/ 5-speed Turbo Function,color: Black/1 Pc Double Burner Gas Stove: Stainless Top And Front, Automatic Ignition ,reversible Trivet, Double Detachable Top Burner, Removable Drip Pan, Dimension: 730mm(l) X 395mm(w) X 105mm(h)/1 Pc Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/1 Pc Caldero: Aluminum, #2, Diameter Height 28cmx16cm With Double Handle/2 Pcs Kawali: Aluminum, (diameter X Height) 28cmx8cm With Double Handle/1 Pc Kawa: 19.5" Cast Iron With Double Handle Depth/height: 21cm (medium)/1 Pc Food Warmer/chafing Dish: Rectangular, 2l Capacity, 6 Pcs In 1 Set Stainless Steel, No Side Handle, Glass Lid Cover With Handle, Dimensions: Same Sizes - 32cm (l) X 26cm (w) X 8cm (h)1 Pc Food Glass Display (estante): 3 Layers; 20(h)x18(w)x36(l)", Aluminum Base, Glass With Screen Door/1 Pc Casserole With Double Handle: Material: Aluminum, Size: 26cm Dimension: 36(l) X 28.5(w) X 21(h)cm/2 Pcs Frying Tongs: Materials: Stainless Steel With Rubber Or Plastic Coated Handles, 12 Inch Long/1 Pc Chopping Board: Material: Polypropylene/1 Pc Chopping Knife: 10” Stainless,wood Handle/1 Pc Butcher's Knife: Materials: Stainless, Wood Handle, Size: About 10"/1 Pc Plastic Table: 4 Seaters, Square Type With Umbrella Hole At The Center, Table Dimension: 36" (length) X 36" (width) X 30" (height), Thickness: Approximately 1.5in To 2in; Color: Beige2 Pcs Monoblock Chairs: With Backrest, Seat 375mmxdepth 330mm, 2.25 Kg, Class B Plastic, Thickness: Approximately 1.5in, Color: Beige/1 Pc Beach Umbrella: 90" Diameter X 8 Ft. Height, 8 Rib Round Metal Pole, Polyester Multi-coloured Umbrella Canopy/2 Pcs Cooler Container: Chest Insulated Cooler, Materials: Polystyrene, Sizes And Capacities: 30 Liters - 45.5cm(l) X 39cm(w) X 31cm(h),color: Blue Or Red/1 Pc Grill/ Ihawan With Stand,material Of Body And Stand: Stainless , 24x12x33inches (lxwxh), Depth: 5inches/2 Pcs Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Umbrella Holder And 2 Chest Coolers Carrier (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo/2 Pcs Weighing Scale: 10kg Capacity, Colored Body / Stainless Pan, Graduation: 50g, Powder Coated Body, Pan Size: 255mm Ø X 55mm Deep, Dial Face: 185mm Ø, 4 Units/master Carton/4 Pcs Plastic Fruit Crate 21 X 15 X 12 Inches/1 Pc Hair Dryer, With 3 Temperature Setting (from High To Low): Size: Atleast 200mm (h), 74mm (w), Weight: Minimum Of 315g, Wattage: 2200w, Voltage: 120-240v, Body Material: Plastic/1 Pc 2 In 1 Steam Pro Hair Straightener (straightener & Curler): Tourmaline Ceramic Wide Plates - 1.25" Wide Heating Plate, Adjustable Temperature Display - 150-235◦c, 360◦, Swivel Cord - Tangle-free, Hanger Design, Ptc Heater - Instant Heat-up/1 Pc Hair Combs: Material: Plastic, Inclusions: Flat Comb Size - 21.5cm (l) X 4.2cm (w), Massage Comb Size: 22cm (l) X 8.5cm (w), Ribs Comb Size: 21.5cm (l) X 4cm (w), Curling Comb Size: 20.2cm (l) X 2.5cm (w), Mirror Size: Atleast 22cm (l) X 10cm (w); Storage Base Size: Atleast 10cm (l) X 15cm (w), Package Size: Approx. 22-23cm (l) X 16cm (w) X 11cm (h), Package Weight: Approx. 305g/1 Pc Hair Clips: Plastic, Product Size: Approx. 4.5", Color: Black (12pcs)/1 Pc 7pcs Face Brush Set, Inclusion: Powder Brush, Size: 17cm, Bristle Length: 3.2cm, Ferrule Width:1.9cm, Powder Buffer Brush, Size: 19cm, Bristle Length: 5cm, Ferrule Width: 2.1cm,foundation Brush, Size: 17cm, Bristle Length: 3.3cm, Ferrule Width: 2.2cm, Flat Foundation Brush, Size: 17cm,bristle Length: 3.2cm; Ferrule Width:1.2cm, Highlight Brush, Size: 16.5cm,bristle Length: 2.7cm, Ferrule Width: 2.3cm,angle Cheek Brush, Size: 17cm, Bristle Length: 3.1-2.3cm,ferrule Width: 2.4cm, Highlighting Fan Brush, Size: 16.5cm, Bristle Length: 4cm, Ferrule Width: 2.5cm, With Brush Bag/1 Pc Eyelash Curler: Material: Carbon Steel, Size: Approx. 5.91 X 3.94 X 1.97"/1 Pc Eyebrow Razor: Handle Material: Plastic, Size: Approx. 6.8(l) X 2(w) X 0.1"(h), 6pcs/pack/1 Pc Makeup Sponge Set Blender: Material: Sponge, Size: Approx. 4.02 (l) X 3.94(w) X 2.52"(h), 4pcs/set/1 Pc False Eyelashes, Product Dimensions: ‎ Approx. 0.75(l) X 3.88(w) X 5.38"(h), 5pairs/pack/1 Pc Eye Shadow Pallete: 12 Curated Peach-inspired Shades, Finish Type: Metallic, Matte, Product Dimension: Approx. 0.08 (l) X 0.04 (w) X 0.06" (h)/1 Pc Contour Palette: Multi-colored, Finish Type: Matte, Package Dimension: Approx. 5.75 (l) X 4.25 (w) X 0.5" (h)/1 Pc Hypercurl Waterproof Mascara Make Up Set: Product Dimensions: Approx. ‎0.85 (l) X 2.75 (w) X 5.63" (h), Color: Black/1 Pc Waterproof Matte Gel Eyeliner Pencil: Item Form: Pencil, Powder, Creamy, Finish Type: Matte, Product Dimensions: About‎ 5.77 X 1.97 X 0.81", Color: Black/1 Pc Eyebrow Gel, Waterproof: Weight: About 0.16 Oz, Product Dimension: Approx. 0.75 (l) X 1.9 (w) X 5.65 (h) Inches, Color Black, Brown/1 Pc Blush On, 3 Complimentary Skin-flushed Shades, Product Dimensions: Approx. 2.89 (l) X 0.43 (w) X 2.33" (h)/1 Pc Powder Blush Makeup Palette, Product Dimensions: ‎approx. 2.43 (l) X 2.43 (w) X 0.66" (h)/1 Pc Eye Shadow Palette; 12 Curated Peach-inspired Shades, Finished Type:metallic,matte, Product Dimensions:approx 0.08(l)x0.04(w) X0.06”(h)/ 1 Pc Applicator Brush And Plastic Comb: 13cm Black, Double-sided Comb, Pointed Handle For Sectioning Hair/1 Pc Hair Clipper: Electric; 110v-240v, 50-60hz,all Metal Machine, Led Light Display Stainless Steel Blade, Blade Width 45mm,low Noise High Power, 2000 Ma Lithium Battery, 210 Minutes Working Time, 4pcs Comb Guide 3/6/10/13mm, Body Size: 17x4cm, Body Weight: 371g, With Complete Accessories - Fiber Comb: Cleaning Brush, Lubricant, Charger/1 Pc Spray Bottle: 250ml Plastic Hairdressing Spray Bottle/1 Pc Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm, Length: 20.9"/52cm, Width: 14"/36cm, 4 Drawers, Blower Holder/1 Pc Curling Iron: 220v Power, 4gen; White, 32x25x13mm, Energy Efficient-48w,360degree Rotating Tail, Automatic Hair Curler, Iron Ceramic, Adjustable Size/1 Pc Apron: Length: 76cm, Width: 59cm, Color: Black, Material: Nylon, Waterproof/1 Pc Curling Rod: Small, 2cm, Cylindrical, Plastic Resin With Rubber Band Kits,multi-color/1 Pc Curling Rod: Medium, 2.5cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/1 Pc Curling Rod: Large, 3cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/1 Pc Spray Net: 600ml, 27.5cm, Hard Hold/1 Pc Hair Spray Aerosol Extra Hold: Weight: About 7ounces /198g, Scented, Package Dimensions: ‎7.83 X 6.69 X 2.17"/1 Pc Hair Trimmer: Running Time 120 Minutes Battery Powered,rechargeable Li-ion Battery 1500 Mah, Dimension: Approximately 6-7" (l) X 1.5-2.5 (w), Material: Stainless; Accessories: 4 Plastic Combs In Different Sizes 3mm, 6mm, 9mm, 12mm, Inclusions: 1 Recharging Transformer (charger), And 1 English User Manual, Input: Can Be Used For 110-240 Voltage/3 Pcs Hair Dryer, With 3 Temperature Setting (from High To Low): Size: Atleast 200mm (h), 74mm (w), Weight: Minimum Of 315g, Wattage: 2200w, Voltage: 120-240v,body Material: Plastic/3 Pcs 2 In 1 Steam Pro Hair Straightener (straightener & Curler): Tourmaline Ceramic Wide Plates - 1.25" Wide Heating Plate, Adjustable Temperature Display - 150-235◦c, 360◦, Swivel Cord - Tangle-free; Hanger Design, Ptc Heater - Instant Heat-up/3 Pcs Hair Combs: Material: Plastic, Inclusions: Flat Comb Size - 21.5cm (l) X 4.2cm (w), Massage Comb Size: 22cm (l) X 8.5cm (w), Ribs Comb Size: 21.5cm (l) X 4cm (w),curling Comb Size: 20.2cm (l) X 2.5cm (w), Mirror Size: Atleast 22cm (l) X 10cm (w), Storage Base Size: Atleast 10cm (l) X 15cm (w),package Size: Approx. 22-23cm (l) X 16cm (w) X 11cm (h), Package Weight: Approx. 305g/3 Pcs Hair Clips: Plastic, Product Size: Approx. 4.5",color: Black (12pcs)/3 Pcs Disposable Latex Free Gloves: Non-sterile, 100 Pcs Per Pack, Product Dimensions: Approx.‎ 8.6" (l) X 4.9" (w) X 3" (h), Weight: 1.25 Pounds, Material: Synthetic Pvc/3 Pcs Cutting Scissors: 6" Stainless Steel, 65g/3 Pcs Thinning Scissors: 17.5x5cm Stainless Steel/3 Pcs Drip Pan: 32cmx35cm Plastic, Black/3 Pcs Hair Clipper: Electric,110v-240v, 50-60hz,all Metal Machine,led Light Display Stainless Steel Blade, Blade Width 45mm, Low Noise High Power, 2000 Ma Lithium Battery, 210 Minutes Working Time, 4pcs Comb Guide 3/6/10/13mm, Body Size: 17x4cm, Body Weight: 371g,with Complete Accessories - Fiber Comb, Cleaning Brush, Lubricant, Charger/3 Pcs Nail Tool Set: Material: Stainless Steel, Case: Leather, Package Size: Approximately 15-15.5cm (l) X 8cm (w) X 2cm (h),inclusions: Cuticle Trimmer (95mm), Blackhead Needle And Loop Remover (83mm), Eyebrow Tweezer (86mm) Peeling Knife (90mm), Nail File (75mm), Ear Pick (78mm), Double Pick (75mm), Dead Skin Fork (86mm), Small Pedicure Plier (95mm), Acne Needle (83mm), Small Nail Clipper (62mm) Bevel Nail Clipper (61mm), Large Nail Clipper (82mm), Beauty Tip Scissor (89mm), Pusher/3 Pcs Cotton Balls: 300g (100 Pcs Large Cotton Balls)/3 Pcs Nail Polish: Volume: 15ml, With 24 Colors Inclusions: 14k Gold, 18k Gold, 24k Gold, African Plum, Baby Pink, Black Velvet, Carolina Peach, Cashmere, Emerald Shimmer, Golden Bronze, Italian Nude, Platinum Special, Pussy Red, Red Pearl, Saphire Glow, Silver Platinum, Simply Red, Tahiti Brown, White Satin, White Rose, Platinum Silver, Touch Of Tan, Touch Of Beige, Colorless/3 Pcs Foot Spa Soaker: With Pumice Stone, Package Dimensions: Approximately 16.42" X 13.58" X 7.91", Weight: About 4.63 Pounds, Rated Power: 500 Watts, Rated Voltage: 110~120v, Rated Frequency: 50hz, Temperature Adjustable Range: 35℃ To 48℃/3 Pcs Astringent Foot Soaker: 128oz/3 Pcs Cooling Foot Soak: Product Dimensions: ‎approximately 6.5-7" X 2.38-2.50" X 9.259.50", Weight: Atleast 900g/3 Pcs Exfoliating Foot Scrub: Package Dimensions: Approximately‎ 7.05-7.50" X 2.32-3" X 1.97-2", Weight: Atleast 6oz/3 Pcs Foot File And Callus Remover: Material: Metal, Steel, Item Dimensions: Approx. 10-10.78" X 2.7" X 0.29", Item Weight: 3.2 Pounds/3 Pcs Foot Scrub/3 Pcs Manicurist Bag: Made Of Heavy Duty Nylon, Large Capacity: Enough Room To Hold Up To 42 Bottles Of 15ml Nail Polish, Size: Approx. 8-9" (l) X 6-7" (w) X 4-5" (h)/3 Pcs Spray Bottle: 250ml Plastic Hairdressing Spray Bottle/3 Pcs Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm, Length: 20.9"/52cm, Width: 14"/36cm, 4 Drawers, Blower Holder/3 Pcs Apron: Length: 76cm, Width: 59cm,color: Black,material: Nylon, Waterproof/3 Pcs Alcohol: 70% Ethyl Alcohol With Moisturizer,500ml/3 Pcs Shampoo: 1000ml, Green Apple And Citrus Lemon Variant/3 Pcs Hair Spa: 1000ml, Lavender And Strawberry Variant/3 Pcs Hot Oil: Keratin Organic Hot Oil, 1000ml, Aloe Vera Variant/3 Pcs Hair Cellophane: 500ml, Natural, Brown,burgundy And Ash Blonde Variant/3 Pcs Hair Rebonding Set: 1000ml Hair Straightening And Hair Neutralizing (ion Perm)/3 Pcs Hair Color Dye:100 Ml, 2pcs Each (black, Dark Brown, Medium Brown, Light Brown, Blonde, Light Blond, Lighter Blonde, Lightest Blonde, Dust)/3 Pcs Hair Color Developer: 100ml 2pcs Each 6%, 9%, 12% Oxidizer/3 Pcs Hair Bleaching Powder: 500g/3 Pcs Brazilian Blowout: 120ml, 3-in-1 Set (clarifying Shampoo, Brazilian Blowout, After Treatment Conditioner)/24 Pcs Hair Dryer, With 3 Temperature Setting (from High To Low): Size: Atleast 200mm (h), 74mm (w), Weight: Minimum Of 315g, Wattage: 2200w, Voltage: 120-240v, Body Material: Plastic/24 Pcs 2 In 1 Steam Pro Hair Straightener (straightener & Curler): Tourmaline Ceramic Wide Plates - 1.25" Wide Heating Plate, Adjustable Temperature Display - 150-235◦c, 360◦,swivel Cord - Tangle-free, Hanger Design, Ptc Heater - Instant Heat-up/24 Pcs Hair Combs: Material: Plastic, Inclusions: Flat Comb Size - 21.5cm (l) X 4.2cm (w), Massage Comb Size: 22cm (l) X 8.5cm (w), Ribs Comb Size: 21.5cm (l) X 4cm (w), Curling Comb Size: 20.2cm (l) X 2.5cm (w), Mirror Size: Atleast 22cm (l) X 10cm (w), Storage Base Size: Atleast 10cm (l) X 15cm (w), Package Size: Approx. 22-23cm (l) X 16cm (w) X 11cm (h), Package Weight: Approx. 305g/24 Pcs Hair Clips: Plastic, Product Size: Approx. 4.5", Color: Black (12pcs)/24 Pcs Disposable Latex Free Gloves: Non-sterile, 100 Pcs Per Pack, Product Dimensions: Approx.‎ 8.6" (l) X 4.9" (w) X 3" (h), Weight: 1.25 Pounds, Material: Synthetic Pvc/24 Pcs Drip Pan: 32cmx35cm Plastic, Black/24 Pcs Shower Caps: 32cm, Thick Plastic, Elastic, Washable/24 Pcs Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm, Length: 20.9"/52cm, Width: 14"/36cm, 4 Drawers, Blower Holder/24 Pcs Curling Iron: 220v Power, 4gen, White, 32x25x13mm, Energy Efficient-48w, 360degree Rotating Tail, Automatic Hair Curler, Iron Ceramic, Adjustable Size/24 Pcs Hair Steamer: With 4 Wheels, 360degrees Movable, Gray Color, Adjustable Height With Timer And Control/120 Pcs Cape: 140x110cm, Satin, Nylon, Waterproof, Black/72 Pcs Microfiber Towel: 25x65cm, 135g, Microfiber, Dark Colors/24 Pcs Curling Rod:small, 2cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/24 Pcs Curling Rod: Medium, 2.5cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/24 Pcs Curling Rod: Large, 3cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/120 Pcs Ear Caps: (l X W X T): 8cm X 4.5cm X 2.1cm/3.15" X 1.77" X 0.83", Black,plastic/24 Pcs Shampoo: 1000ml, Green Apple And Citrus Lemon Variant/24 Pcs Hair Spa: 1000ml, Lavender And Strawberry Variant/24 Pcs Hot Oil: Keratin Organic Hot Oil, 1000ml, Aloe Vera Variant/24 Pcs Hair Cellophane: 500ml, Natural, Brown, Burgundy And Ash Blonde Variant/24 Pcs Hair Rebonding Set: 1000ml Hair Straightening And Hair Neutralizing (ion Perm)/24 Pc Hair Color Dye:100 Ml, 2pcs Each (black, Dark Brown, Medium Brown, Light Brown, Blonde, Light Blond, Lighter Blonde, Lightest Blonde, Dust)/24 Pcs Hair Color Developer: 100ml 2pcs Each 6%, 9%, 12% Oxidizer/24 Pcs Hair Bleaching Powder: 500g/24 Pcs Brazilian Blowout: 120ml, 3-in-1 Set (clarifying Shampoo, Brazilian Blowout, After Treatment Conditioner)/24 Pcs Hair Shear: Material: Stainless Steel, 1 Precision Scissor Approximately 6-7",1 Thinning Scissor Atleast 6", Accesories: Scissors Oil Atleast 5ml/34 Pcs Angle Grinder Cutting Disk: 10 Pcs. Per Set, Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8")/34 Pcs Crow Bar: At Least 36" Long,length Tolerance: +- 1/8, Material: Forged Steel Carbon/34 Pcs Claw Hammer: Round Head, Head Weight: At Least 16oz, Overall Weight: Approximately 17oz-23oz, Head Material: Forged Steel, Handle Material: Fiberglass Handle With Rubber Cushion, Overall Length: Approximately 12-14"/34 Pcs Hacksaw With Blade: Material: Aluminum Alloy Frame With Soft-grip Handle, At Least 12"-15" Long Including Handle, With Soft-grip Rubber Handle, Bi-metal, Blade Length: About 30cm, Width: 3cm/34 Pcs Meter Tape With Magnetic Hook: Blade Material: Nylon Coated Blade, Dimensions: 16ft (l) X 25mm (w)/34 Pcs Handsaw: Blade Length: About 15",blade Material: Carbon Steel, Handle Length: 5", Handle Material: Plastic/rubber, Color: Gray,8 Teeth Per Inch/34 Pcs Shovel: Round End, Tempered Steel Blade: 17-23 Cm, Blade Tip Width, 22-28cm Blade Tip Length, All Metal Handle, Overall Length: 100cm-115 Cm, Capacity: 350-400 Lbs/34 Pcs Shovel: Rectangular End, Tempered Steel Blade: 22-26 Cm, Blade Tip Width, 22-28cm Blade Tip Length, All Metal Handle, Overall Length: 100cm-115 Cm/34 Pcs Level Bar: Aluminum Frame, Length: At Least 24"/60cm, Aluminum Thickness: 1.5mm, Double Side Milles, 0.5mm/m Accurate Vials/34 Pcs Steel Float/plastering Trowel: Thickness: At Least 0.7 Mm, Surface Measurement, Length: 12", Width: 4", Mmaterial: High Carbon Steel With Wood Handle/34 Pcs Steel Square: Carpenter's Framing Square, Blade Width: 2" Scale: At Least 16" (l) X 24" (w), Material: Steel/34 Pcs Masonry Trowel: Length: At Least 12"long, Width: 6", Material: Flat Steel, With Wood Handle/34 Pcs Circular Saw: Voltage: 220-240v, Frequency: 50-60hz, Input Power: 1400w, No-load Speed: Atleast 4800rpm, Blade Diameter: 185mm, Cutting Capacity: 45degree: 44mm, 90 Degree: 65mm, Maximum Cutting Depth: Atleast 90°62mm, Weight: Maximum Of 5.2kg, Item Approximate Dimension: 15-17cm (h), 25-28cm (w), 30-35cm (l)/34 Pcs Masonry Square/metric Square: Material: Aluminum, Length: Approx. 24", Width: 16", 1/8 '' Thickness/34 Pcs Mason's Level: At Least 48'' Long, Aluminum Reinforced Frame, 60cm Only/34 Pcs Sledgehammer: Weight: At Least 3 Lbs With Fiberglass Handle, Forged Steel Round Head, Length: Approximately 25-27"/34 Pcs Concrete Chisel: Pointed Sharp End, Material: Forged Steel Chisel, With Rubberized Handle, Length: Approximately 10''/34 Pcs Putty Knife/paint Scraper Set (4pcs): Stainless Steel Blade With Rubberized Handle, Blade Width: 1", 2" And 3", Length Including Handle: Approximately 8-9"/34 Pcs Mason's Line: #18 Braided Nylon, 500 Ft/roll, Color Orange/34 Pcs Hammer Drill: Electric, 1980w 220v, Rated Frequency: 50/60hz, Load Speed: 0-3800rpm (revolutions Per Minute), Chuck: 13mm With Ergonomic Anti-slip Handle/34 Pcs Angle Grinder: Rated Input Power: 730w, Wheel Diameter: 4",rated Voltage: 220v, Frequency: 60hz, No Load Speed: 12,000 Rpm, Weight: Approximately 1.6kg, Grinding Spindle Thread: M10, Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h )/34 Pcs Wooden Float: Size: At Least 12x4", Has 5/8" Thick Rubber Pad, With Wooden Handle/4 Pcs Nail Tool Set: Material: Stainless Steel, Case: Leather, Package Size: Approximately 15-15.5cm (l) X 8cm (w) X 2cm (h), Inclusions: Cuticle Trimmer (95mm), Blackhead Needle And Loop Remover (83mm), Eyebrow Tweezer (86mm) Peeling Knife (90mm), Nail File (75mm), Ear Pick (78mm), Double Pick (75mm), Dead Skin Fork (86mm), Small Pedicure Plier (95mm), Acne Needle (83mm), Small Nail Clipper (62mm) Bevel Nail Clipper (61mm), Large Nail Clipper (82mm), Beauty Tip Scissor (89mm), Pusher/4 Pcs Cotton Balls: 300g (100 Pcs Large Cotton Balls)/4 Pcs Nail Polish: Volume: 15ml, With 24 Colors Inclusions: 14k Gold, 18k Gold, 24k Gold, African Plum, Baby Pink, Black Velvet, Carolina Peach, Cashmere, Emerald Shimmer, Golden Bronze, Italian Nude, Platinum Special, Pussy Red, Red Pearl, Sapphire Glow, Silver Platinum, Simply Red, Tahiti Brown, White Satin, White Rose, Platinum Silver, Touch Of Tan, Touch Of Beige, Colorless/4 Pcs Foot Spa Soaker: With Pumice Stone, Package Dimensions: Approximately 16.42" X 13.58" X 7.91", Weight: About 4.63 Pounds, Rated Power: 500 Watts, Rated Voltage: 110~120v, Rated Frequency: 50hz, Temperature Adjustable Range: 35℃ To 48℃/2 Pcs Astringent Foot Soaker: 128oz/2 Pcs Cooling Foot Soak: Product Dimensions: ‎approximately 6.5-7" X 2.38-2.50" X 9.259.50", Weight: Atleast 900g/2 Pcs Exfoliating Foot Scrub: Package Dimensions: Approximately‎ 7.05-7.50" X 2.32-3" X 1.97-2", Weight: Atleast 6oz/4 Pcs Foot File And Callus Remover: Material: Metal, Steel, Item Dimensions: Approx. 10-10.78" X 2.7" X 0.29", Item Weight: 3.2 Pounds/2 Pcs Foot Scrub/2 Pcs Manicurist Bag: Made Of Heavy Duty Nylon, Large Capacity: Enough Room To Hold Up To 42 Bottles Of 15ml Nail Polish, Size: Approx. 8-9" (l) X 6-7" (w) X 4-5" (h)/6 Pcs Microfiber Towel: 25x65cm, 135g, Microfiber,dark Colors/2 Pcs Alcohol: 70% Ethyl Alcohol With Moisturizer, 500ml/1 Pc Double Burner Gas Stove: Stainless Top And Front, Automatic Ignition ,reversible Trivet, Double Detachable Top Burner, Removable Drip Pan, Dimension: 730mm(l) X 395mm(w) X 105mm(h)/1 Pc Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/2 Pcs Kawa: 19.5" Cast Iron With Double Handle Depth/height: 21cm (medium)/1 Pc Plastic Table: 4 Seaters, Square Type With Umbrella Hole At The Center, Table Dimension: 36" (length) X 36" (width) X 30" (height), Thickness: Approximately 1.5in To 2in, Color: Beige/1 Pc Monoblock Chairs: With Backrest, Seat 375mmxdepth 330mm, 2.25 Kg, Class B Plastic, Thickness: Approximately 1.5in, Color: Beige/1 Pc Peanut Grinding Machine: Electric, 220v, 300w, 50-60hz,material: High Quality Stainless Steel Body And Base, Color: Black, Dimension: Approx. Length: 43.5cm, Width: 23cm, Height: 13.5cm/1 Pc Hand Cobbler Shoe Repair Machine Dual Cotton Nylon Line Sewing Machine Manual Leather Machine Shoe Sewing Machine Color Silver: Product Dimensions 14.4"d X 20.5"w X 5.5"h, Material: Cast Iron Item Weight: 22 Pounds, Power Source: Crank/5 Pcs Wooden Handle Shoes Repairing Awl Shoe Sewing Tool Diy Craft Repair Hand Straight Hook Shoes Sewing Awl Type: Shoes Sewing Awl Material: Wood+metal, Features: Shoes Sewing Awl, Repair Hand , Crochet Needle Tool Dimension: 1: App.2x13.5x6cm/0.79x5.31x2.36in 2: App.2x13x5.5cm/0.79x5.12x2.17in 3: App.2x13x5.5cm/0.79x5.12x2.17in, Color: Wood Color + Silver/5 Pcs Upholstery Stitching Thread Black 100 Mtr. 1 Pc Upholstery Hand Stitching Tools For Belts, Saddles, Shoes, Fabric Household Use Handwork Sewing Leather Craft Shoes Repairing/5 Pcs Upholstery Stitching Thread Brown 100 Mtr 1 Pc Upholstery Hand Stitching Tools For Belts, Saddles, Shoes, Fabric Household Use Handwork Sewing Leather Craft Shoes Repairing/5 Pcs Upholstery Stitching Thread White 100 Mtr. 1 Pc Upholstery Hand Stitching Tools For Belts, Saddles, Shoes, Fabric Household Use Handwork Sewing Leather Craft Shoes Repairing/2 Pcs Angle Grinder Cutting Disk: 10 Pcs. Per Set, Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8")/2 Pcs Angle Grinder: Rated Input Power: 730w, Wheel Diameter: 4", Rated Voltage: 220v,frequency: 60hz, No Load Speed: 12,000 Rpm, Weight: Approximately 1.6kg, Grinding Spindle Thread: M10, Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h)/2 Pcs Chipping Hammer: Item Weight: ‎at Least 13.8 Ounces, Product Dimensions: ‎11" (l) X 1" (w) X 7.5" (h), Material: Genuine Leather Grip And Forged Steel/2 Pcs Heavy Duty Corded Drill: Rated Input Power: 750w, Chuck Capacity: Up To 13mm, Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm), Dimension: 268mm (l) X 69mm (w) X 192mm (h), Weight W/out Cable: Approximately 1.6-1.8 Kg, Spindle Collar Diameter Of 43 Mm/2 Pcs Metal Drill Bit Set: Material: High Speed Steel, 19pcs Per Set(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm,7.5mm,8mm,8.5mm,9mm,9.5mm,10mm), Point Angle: 118degree C, Standards: Din 338, Bit Geometry: Standard Twist Bit/2 Pcs Mig Welding Pliers: Overall Length: Atleast 210mm, Material: High Carbon Steel, Handle Material: Thermoplastic Rubber/2 Pcs Needle File Set: (6 Pieces Hand Metal Files, Hardened Alloy, Strength Steel Set Includes Flat, Flat Warding, Square, Triangular, Round, And Half-round File), Color Black, Metal Type: Carbon Steel, Handle Material: Wood, Alloy Steel, Item Dimensions: Approximately 6.1" (l) X 3" (w) X 0.5" (h)/2 Pcs Portable Welding Machine: Input Voltage: 220-240, Frequency: 50-60hz, Output Current: 10-220a, Led Display, No-load Voltage: 85v, Max. Output Current: 220a, Diameter Of Electrode: 1.6-3.2mm, Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable/2 Pcs Speed Square: Material: Cast Aluminum, Size: About 18x18x2cm/7.09x7.09x0.79", Weight: About 130g,triangle-shaped/2 Pcs Welding Helmet: Auto Darkening Helmet: Power Supply: Battery And Solar Powered, Light Shade: Din9-1, Dark Shade: Din4, Switching Time: 1/25000s, Delay Time: 0.1-0.8s, Sensitivity Adjustment: Stepless Control, Operation Temperature: -5 Degrees- 55 Degrees, Active Viewing Area: 93mmx43mm, Active Viewing Area Size: (+/- 10mm), Item Weight: At Least 1.85 Pounds, Package Dimensions: ‎approximately 12-12.4" (l) X 9-9.61" (w) X 7-7.68" (h)/2 Pcs Welding Magnets: 6 Pcs/set, Overall Length: At Least (3"), Hold Capacity: Up To 25lbs, Arrow Design Supports Angle: 45°, 90°, And 135°, Item Weight: 295g, Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches, ‎material: Steel, Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm)/2 Pcs Welding Suit: 100% Cotton With Pyrovatex, 2 Back Pockets And Rule Pocket With Safety Gusset Feature, High Quality And Long Lasting, Two Way Zipper, Approximate Cloth Size: Large/10 Pcs Camping Dome Tent: Product Dimensions: 82.7"l X 55"w X 43.5"h, Item Weight: 4 Pounds Shape: D Shape Occupancy: 2 Person Included Components: Carry Bag, Stakes, Rainfly Water Resistance Technology 1000 Millimeters, Special Feature: Windproof, Sun Protection/outdoor Mat (banig):size (48" X 75") Material: Palm Leaves (buri)/10 Pcs Double Burner Gas Stove: Stainless Top And Front, Automatic Ignition ,reversible Trivet, Double Detachable Top Burner, Removable Drip Pan, Dimension: 730mm(l) X 395mm(w) X 105mm(h)/2 Unit Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/1 Unit Gas Range: Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h), 4-gas Burner, 62l Gas Oven, Button Ignition, Top Glass Lid, Net Weight: Maximum Of 28kg, Pan Support: Light Cast Iron Pan Support/5 Pcs Kawali: Aluminum, (diameter X Height) 28cmx8cm With Double Handle/2 Pc S Kawa: 19.5" Cast Iron With Double Handle Depth/height: 21cm (medium)/5 Pcs Wok Ladle: Material: Stainless Steel With Wooden Handle: Total Length Of Item: 24 Inches/5 Pcs Wok Spatula: Material: Stainless Steel With Wooden Handle, Total Length Of Item:24 Inches/5 Pcs Stainless Steel Long Wooden Handle Skimmer Strainer: Material: Stainless Steel, Size: 32.3*11.5cm/5 Pcs Casserole With Double Handle: Material: Aluminum, Size: 26cm, Dimension: 36(l) X 28.5(w) X 21(h)cm/5 Pcs Frying Tongs: Materials: Stainless Steel With Rubber Or Plastic Coated Handles, 12 Inch Long/5 Pcs Chopping Board: Material: Polypropylene Plastic: 8"(w) X 10"(l), 1cm (thickness)/5 Pcs Chopping Knife: 10" Stainless; Wood Handle/5 Pcs Grill/ Ihawan With Stand, Material Of Body And Stand: Stainless, 24x12x33inches (lxwxh), Depth: 5inches/1 Unit Heavy Duty Commercial Micromatic Big 7.8l Mrc-50 Rice Cooker 45cups (white)/10 Dz Melamine Round Dinner Plate: 9" Diameter, Color; White/10dz Platito (saucer): Material: Melamine Plastic, Standard Size: 6 Inch (diameter) X ¾ Inch Height/10 Pcs Serving Tray Bamboo - Wooden Tray With Handles, Color Brown Material Wood, Product Dimensions 17"l X 11"w X 2"h/10dz Drinking Glass: 8 Oz, Glass, Product Size: Base Diameter-7cm, Top Diameter: 7cm, H-11.4cm, Heat Resistant, Dishwasher Safe/10dz Spoon: Stainless, 12pcs/per Pack, Size: 8"/10dz Fork: Stainless, 12 Pcs/per Pack, Size 8"/5dz Mangkok (round Shape Bowl), Materials: Ceramic, Size: 6inch (diameter) X 5cm (height)/5 Pcs Storage Box With Wheels For Easy Transport, Measurements: L72 X W52 X H44cm, Food Grade Material, 120l Capacity, Stackable; With Lid And Handle, Color: White/2 Pcs Butcher's Knife: Materials: Stainless, Wood Handle, Size: About 10"/5 Pcs Gallon Acrylic Juice Dispenser Type: Type: Water/juice Dispensers, Overall Dimensions: Height:32 1/2 Inches, Top Diameter: 6 11/16 Inches, Capacity:1.1 Gallons, Base Material: Stainless Steel, Container Material: Acrylic, Style: Single/5 Pcs Chafing Dish Food Warmer Buffet Set: Size: 1/1pan*3, Color: Silver, Material: Stainless Steel, Product Dimensions: 13.39"l X 15.35"w X 23.62"h, Capacity: 8 Quarts/5 Pcs Chest Cooler: Item Package Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h), Package Weight: ‎5.76kg, Inside Dimensions: 24.95" (l) X 14.58" (w) X 14.77" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l , Color: Blue Or Red/5 Pcs Matress: Size: Semi Double (48" X 75"), Thickness: 4"/15 Pcs Matress Size: Queen (60" X 75") Thickness: 4"/15 Pcs Pillow: Size: Standard (20" X 26")/10 Sets Bed Linen Set Of 3pcs, 1-bed Sheet Size (48" X 75"), 2-pillow Case (20" X 26")/2 Sets Bed Linen Set Of 3pcs: 1-bed Sheet Size (60" X 75"), 2-pillow Case (20" X 26")/6 Unit Electric Fan: Color: Black, Electric Fan Design: Floor Fan, Power Source: Corded Electric Style: 3-speed Ac Motor Fan, Product Dimensions: 15.75"d X 17.72"w X 53.15"h, Room Type: Bedroom, Special Feature: Oscillating, Adjustable Height, Adjustable Tilt,wattage: 60 Watt/4 Unit Industrial Ceiling Fan: Product Material: Cast Aluminum Casing, Product Specifications: 2000mm, Operating Voltage: 220v, Wind Speed: 5th Gear, Number Of Fan Product Color: Black, White, Product Power: 165w, Blades: 6 Blades/150 Pcs Monoblock Chairs: With Backrest, Seat 375mmxdepth 330mm, 2.25 Kg, Class B Plastic, Thickness: Approximately 1.5in, Color: White/15 Pcs Solid Top Round Table: Material: Plastic, Color: White, Size(cm): 115 X 74 X 4.5, Foldable Legs,diameter: 45″, 6 To 8 Seater Capacity Approved Budget For The Contract : P 3,426,136.00 Contract Duration : 30 Calendar Days Delivery Period : 7 Calendar Days After The Issuance Of Notice To Proceed Source Of Fund : Trust Fund((dole) 2. The Local Government Unit Of Irosin Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Seven(7) Calendar Days. Bidders Should Have Completed For The Last Two(2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent(60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Local Government Unit Of Irosin And Inspect The Bidding Documents At The Address Given Below From 8:00 Am-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 8, 2025 Until January 30, 2025 From The Given Address And Philgeps Website And Lgu-irosin Website And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (p 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees By Presenting In Person The Official Receipt Of Bid Documents To The Bac Office. 6. The Local Government Unit Of Irosin Will Hold A Pre-bid Conference On January 15, 2025, 9:00am At The Conference Room, Office Of The Mayor, Municipal Compound, San Julian, Irosin, Sorsogon Which Shall Be Open To All Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before January 30, 2025, 8:59 Am At Bac Office, Municipal Compound, San Julian, Irosin, Sorsogon. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On January 30, 2025, 9:00 Am At The Given Address Below Conference Room, Office Of The Mayor, Municipal Compound, San Julian, Irosin, Sorsogon. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Irosin Reserves The Right To Accept Any And All Bids, Declare A Failure Of Bidding Or Not Award A Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations(irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11.for Further Information, Please Refer To: Judith O. Baeza Peso Municipal Compound, San Julian, Irosin, Sorsogon Url: Www.irosin.gov.ph 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website And Www.irosin.gov.ph Date Of Publication: January 8, 2025 _____________________ Noel D. Mercado Ii Bac Chairman Instruction To Bidders 1. Scope Of Bid The Procuring Entity, Local Government Unit Of Irosin Invites Bids For The Supply & Delivery Of Various Supplies And Materials For Dole Integrated Livelihood Program And Sustainable Industry Project, With Project Identification Number Good-01-2025. [note: The Project Identification Number Is Assigned By The Procuring Entity Based On Its Own Coding Scheme And Is Not The Same As The Philgeps Reference Number, Which Is Generated After The Posting Of The Bid Opportunity On The Philgeps Website. The Procurement Project (referred To Herein As “project”) Is Composed Of 1 Lot Various Supplies And Materials For Livelihood Program, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For Trust Fund(dole) In The Amount Of 2.2. The Source Of Funding Is: Three Million Four Hundred Twenty Six Thousand One Hundred Thirty Six Pesos (p 3,426,136.00) Trust Fund(dole) 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manual And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Invitation To Bid By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Inspected The Site, Determined The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A.foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or B. Foreign Ownership Limited To Those Allowed Under The Rules May Participate In This Project. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No. 9184, The Bidder Shall Have An Slcc That Is At Least One(1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must At Least Equivalent To: A. For The Procurement Of Expandable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty Five Percent (25%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.2 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 7.2 Subcontracting Is Not Allowed During The Bidding. 7.3 Subcontracting Is Not Allowed During The Contract Implementation Stage. 7.4 Subcontracting Of Any Portion Of The Project Does Not Relieve The Supplier Of Any Liability Or Obligation Under The Contract. The Supplier Will Be Responsible For The Acts, Defaults, And Negligence Of Any Subcontractor, Its Agents, Servants, Or Workmen As Fully As If These Were The Contractor’s Own Acts, Defaults, Or Negligence, Or Those Of Its Agents, Servants, Or Workmen. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On January 15, 2025, 9:00am At The Conference Room, Office Of The Mayor, Municipal Compound, San Julian, Irosin, Sorsogon. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii( Checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicted In Itb Clause 5.3 Should Have Completed Within The Last Two(2) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostile Convention, Only The Translated Documents Shall Be Authenticated Through The Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii( Checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification From Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 3184. 12. Bid Prices 12.1 Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A.for Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw(ex-works,ex-factory,ex-warehouse,ex-showroom, Or Off The Shelf, As Applicable); Ii. The Cost Of All Custom Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other(incidental) Services, If Any, Listed In The Bds. 13. Bid And Payment Currencies 14.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Adopted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreigh Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 14.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos 14. Bid Security 15.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 15.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty(120) Calendar Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission To The Given Website Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 16. Deadline For Submission Of Bids The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 18.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 18.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1 The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 14 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii(technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Option 1- One Project Having Several Items That Shall Be Awarded As One Contract. 20. Post Qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps), And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Supply & Delivery Of Various Supplies And Materials For Dole Integrated Livelihood Program And Sustainable Industry Project Brief Description: 4 Pcs Barber Brush: 23.3cmx7cm, Soft Fiber Material And Wooden Handle/4 Pcs Hair Clipper: Electric, 110v-240v, 50-60hz,all Metal Machine,led Light Display Stainless Steel Blade, Blade Width 45mm,low Noise High Power, 2000 Ma Lithium Battery, 210 Minutes Working Time,4pcs Comb Guide 3/6/10/13mm,body Size: 17x4cm, Body Weight: 371g,with Complete Accessories - Fiber Comb, Cleaning Brush, Lubricant, Charger/4 Pcs Paddle Brush:body Material: Wood, Dimensions: (lxwxh) 25x8x3cm, Brown/8pcs Spray Bottle: 250ml Plastic Hairdressing Spray Bottle/4pcs Hair Blower: 4000w Accurate Power,2-speed Settings (high & Low), 3 Temperature (cold, Hot & Hotter), Glossy, Thick Long Wires, With Light And Perfume Button/4pcs Hair Blower: 4000w Accurate Power,2-speed Settings (high & Low), 3 Temperature (cold, Hot & Hotter), Glossy, Thick Long Wires,with Light And Perfume Button/4pcs Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm,length: 20.9"/52cm,width: 14"/36cm,4 Drawers, Blower Holder/4pcs Talcum Powder: 200g, Hypo-allergenic, Dermatologist Tested/4 Pcs Cordless Clipper: Body Material: Aluminum,motor: Rotary,power/source Battery: Lithium-ion Battery (90+ Minutes Of Runtime), Blades: Titanium Blades, 3 Guide Combs Plastic Material (#1/2, #1, And #1½),cutting Lengths: 0.4-25mm,inclusions: A Blade Guard, 1 Recharging Transformer (charger), 1 Cleaning Brush, With Lubricating Oil Of At Least 5 Ml And English User Manual,product Dimension: Approximately 6.5-7" (l) X 2-3" (w),weight: Maximum Of 400g, Input: Can Be Used For 110-240 Voltage/4pcs Hair Trimmer: Running Time 120 Minutes Battery Powered, Rechargeable Li-ion Battery 1500 Mah, Dimension: Approximately 6-7" (l) X 1.5-2.5 (w), Material: Stainless,accessories: 4 Plastic Combs In Different Sizes 3mm, 6mm, 9mm, 12mm, Inclusions: 1 Recharging Transformer (charger) And 1 English User Manual, Input: Can Be Used For 110-240 Voltage/4pcs Electric Shaver: With 3d Floating Cutter Head, 40mins. Running Time For 8hrs Fully Charged, Material: Stainless Steel,product Dimension: Approximately 6.5-7" (l) X 2-3" (w),automatic Voltage 100-240v,battery: 2 Cell Nickel-metal Hydride Cylindrical Battery Pack, 4000mah,power Type: Rechargeable/4pcs Hair Shear: Material: Stainless Steel,1 Precision Scissor Approximately 6-7",1 Thinning Scissor Atleast 6",accesories: Scissors Oil Atleast 5ml/4 Pcs Razor Blades: 10pcs/box (double Edge Stainless)/4 Pcs Shaving Razor/labaha: Dimensions: Approximately 5-6" (l) X 3/4-1" (w), Material: Carbon Steel, Color: Black/ 4 Pcs Barber Skin Fade Brush: Handle: Wood, With Soft Bristles 1" (l),dimensions: Atleast 5.5" (l) X 1" (w)/4pcs Comb Set: (4pcs/set), Material: High Quality Plastic, Inclusions: #1-approx. Size: 4.88" (l) X 1.02" (w), #2-approx. Size: 7.09" (l) X 1.46" (w), #3-approx. Size: 7.87" (l) X 1.18" (w), #4-6.10" (l) X 0.20" (w)/4pcs Shaving Gel: (foam), 195g/4pcs Barber's Cape: Color: Black,about 140cm (l) X 110cm (w), Cloth: Polyester/4pcs 360 Degree Swivel Barber Chair: Classic Back Seat With Chrome Steel Base, Premium Steel Frame And High Class Foot Pump, Heavy Duty Leather Cover; Lower Height - At Least 51cm, Top Height - At Least 61cm, Sandles Height - At Least 40cm/8pcs Barber Apron: With Two Pockets, Waterproof, Material: Cotton And Acrylic, Item Size: Approx. 38-38.19" (l) X 27-27.36" (w)/ 4pcs Pomade: 80g, Water-based/26pcs Speed Square: Material: Cast Aluminum, Size: About 18x18x2cm/7.09x7.09x0.79", Weight: About 130g, Triangle-shaped/26pcs Meter Tape With Magnetic Hook: Blade Material, Nylon Coated Blade,dimensions: 16ft (l) X 25mm (w)/26pcs Circular Saw: Voltage: 220-240v, Frequency: 50-60hz, Input Power: 1400w, No-load Speed: Atleast 4800rpm, Blade Diameter: 185mm, Cutting Capacity: 45degree,44mm, 90 Degree: 65mm,maximum Cutting Depth: Atleast 90°62mm, Weight: Maximum Of 5.2kg,item Approximate Dimension: 15-17cm (h), 25-28cm (w), 30-35cm (l)/26pcs Angle Grinder: Rated Input Power: 730w, Wheel Diameter: 4", Rated Voltage: 220v,frequency: 60hz, No Load Speed: 12,000 Rpm, Weight: Approximately 1.6kg, Grinding Spindle Thread: M10, Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h )/26pcs Angle Grinder Cutting Disk: 10 Pcs. Per Set, Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8")/26 Pcs Portable Hand Drill: Power Sourced: Battery Powered - 2pc 21 Volt 1500mah Lithium-ion Batteries, Maximum Rotational Speed: 1500 Rpm, Voltage: 210v,amperage: 1.5 Amps, Chuck Size: 0.38",bit Heads Diameters: From 0.8mm-10mm,product Dimensions: ‎9.6" (l) X 2.1" (w) X 7.5" (h), Material: ‎plastic, Rubber, Metal, Item Dimensions: Approx. ‎9.6" (l) X 2.1" (w) X 7.5" (h),item Weight: Atleast ‎2.5 Pounds,item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Inspiritech Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws,1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag/26pcs Wood Planer: Rated Voltage: 220v, Rated Input Power: 600w, Cutting Width: 82mm, Load Speed: 15,000rpm, Frequency: 60hz, Weight: 3kg./26 Pcs Framing Hammer: Handle Material: Alloy Steel, Item Dimensions: Approximately 16-17" (l) X 5.75-6" (w) X 1.5-2" (h), Item Weight: Atleast 1.4 Pounds/26 Pcs Trim Hammer: Handle Material: Wood, Head Material: Alloy Steel; Item Dimensions Approximately: 14-15" (l) X 5-6"(w) X 1-2" (h),item Weight: Atleast 594 Grams/26pcs Roofing Hammer: Item Weight: ‎1.25 Pounds, Product Dimensions: Approx. 13.7" (l) X 6.75" (w) X 1.5" (h)/26 Pcs Chalk Line: Item Weight: 10.6 Ounces, Product Dimensions: ‎approx. 1200" (l) X 4.72" (w) X 5.91" (h) Inches, Color: ‎blue, Material Type: Alloy Steel, Rubber/26 Pcs Utility Knife: Handle Material: Aluminum, Material: Aluminum Alloy, Weight: 120g/pcs, Blade Size: 19mm (w) X 61mm (h) X 0.6mm (t),blade Material: Steel, Thickness: Atleast 0.6mm/26 Pcs Tin Snips: Item Weight: ‎atleast 1 Pound, Package Dimensions: Approx. 12.36" (l) X 3.7" (w) X 1.3" (h),size: ‎long Straight, 12 Inches Long, Blade Length: 3.20",material: Steel, Cutting Thickness Range Up To 1.2mm Carbon Steel And 0.7mm/26 Pcs Framing Square: Shorter Leg Measures At 8 Inch Outside And 6.5 Inch Inside, Longer Leg Measures At 12 Inch Outside And 11 Inch Inside,material: Carbon Steel/26 Pcs Level: Box Beam Style, Material: Aluminum,dimension: Approximately 24-24.5" (l) X 2-2.6" (w) X 1.2-1.5" (h), Weight: Atleast 0.8 Pounds/26 Pcs Electric Planer: Voltage: 220-240v,input Power: 1050w, No Load Speed: 1600rpm, Planing Width And Depth,82x3mm,heavy Duty Aluminum Base/1 Pc Meter Tape With Magnetic Hook: Blade Material: Nylon Coated Blade, Dimensions: 16ft (l) X 25mm (w)/1 Pc Air Compressor Machine: Motor Power: 1hp, Size: Approx. 935x385x800mm,voltage: 220-240v, 60hz, Speed: 3400 Rpm, Tank Capacity: 24l , Operating Pressure: Max 8 Bar, Air Displacement: 93l/min, Pump Lubricated With Oil/1 Pc Blue Painters Tape, Color: Blue, Size: Atleast 1.41" X 20m,thickness: 0.13mm, Item Weight: 1.92 Pounds, Material: Paper/2pcs Electric Spray Gun: Voltage: 220-240v~50/60hz,spraying Pressure: 0.1-0.2 Bar, Max Flow: 850ml/min, Max Viscosity: 50din-s, Container Capacity: Atleast 800ml,power Cord Length: 2m, Rated Power 500w, Spraying Pressure: Atleast 0.1-0.2bar, Item Dimensions: Approximately 13" (l) X 5" (w) X 11" (h)/1 Pc Extension Pole, (3 Stage Extender) Reach: 1.5-to-3ft,weight: Maximum Of 0.5 Pounds, Max. Standing Reach: 10ft, Material : Aluminum/2 Pcs Paint Brush Set, 5 Pcs/set, Material: Synthetic Bristle, Wood Handle, Overall Length: Atleast 11", Bristles Length: Atleast 3", Brush Width: 1", 1-1/2" 2", 2-2.5", 3"and 4"/ 5 Pcs Paint Roller, Material: Plastic,package Dimensions: Approximately 15.16" (l) X 11.22" (w) X 3.15" (h),item Weight: Atleast 1.06 Pounds, Inclusion: Roller, Atleast 7" In Length, Material: Polyester/2 Pcs Painters Gloves, 12 Pcs/pack, Material: Cotton, Color: Red/1 Pc Putty Knife/paint Scraper Set (4pcs), Stainless Steel Blade With Rubberized Handle, Blade Width: 1", 2" And 3", Length Including Handle: Approximately 8-9"/1 Pc Steel Float/plastering Trowel: Thickness: Atleast 0.7 Mm, Surface Measurement, Length: 12", Width: 4", Material: High Carbon Steel With Wood Handle/2 Pcs Lpg Tank With Gas Regulator And Accessories, Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/2 Pcs Kawali: Aluminum, (diameter X Height) 28cmx8cm With Double Handle/2 Pcs Food Warmer/chafing Dish: Rectangular, 2l Capacity, 6 Pcs In 1 Set Stainless Steel, No Side Handle, Glass Lid Cover With Handle, Dimensions: Same Sizes - 32cm (l) X 26cm (w) X 8cm (h)/2 Pcs Gas Range: Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h), 4-gas Burner, 62l Gas Oven, Button Ignition, Top Glass Lid, Net Weight: Maximum Of 28kg, Pan Support: Light Cast Iron Pan Support/2 Pcs Baking Sheet: Aluminum, 12x16 Inches/2 Pcs Digital Kitchen Scale: Accurate Measurement; Weigh Up To 5 Kg / 11 Lb Precisely In 1 G / 0.05 Oz Increments, Quality Material: Measure Food, Small Items, And Liquids With Confidence On The 304 Food-grade, Stainless Steel Platform, Approx. Dimension 7.3-7.5" (l) X 5.7-5.90" (w) X 0.6-08" (h), 2 X 1.5v Aaa Batteries/2 Pcs Measuring Cup (for Liquid Ingredients): 1 Measuring Cup With Red Graphics, Made Of Non-porous Glass That Won't Warp, Stain, Or Absorb Odors, Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe, Dimension: Approx. 7.13" (l) X 6.75" (w) X 4.38" (h), Measuring Capacity: 500ml/2 Pcs Measuring Cups (for Dry Ingredients): Material: Stainless Steel, 5 Pieces Per Set (1 Cup, 1/2 Cup, 1/3 Cup, 1/4 Cup, 1/8 Cup)/2 Pcs Measuring Spoons (set): 7pcs Stainless Measuring Spoon Kit, The Kit Includes: 1/8 Tsp (0.63ml), 1/4 Tsp (1.25ml), 1/2 Tsp (2.5ml), 3/4 Tsp (3.75ml), 1 Tsp (5ml), 1/2 Tbsp (7.5ml), 1 Tbsp (15ml)/2 Pcs Mixing Bowl: Medium, Approx. Diameter: 28cm, Height:11.2cm, Material: Stainless; Capacity: At Least 4l/2 Pcs Standmixer: 2-in-1 360 Automatic Rotating Bowl Electric Stand & Hand Mixer, 4.5l W/ 5-speed Turbo Function,color: Black/1 Pc Double Burner Gas Stove: Stainless Top And Front, Automatic Ignition ,reversible Trivet, Double Detachable Top Burner, Removable Drip Pan, Dimension: 730mm(l) X 395mm(w) X 105mm(h)/1 Pc Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/1 Pc Caldero: Aluminum, #2, Diameter Height 28cmx16cm With Double Handle/2 Pcs Kawali: Aluminum, (diameter X Height) 28cmx8cm With Double Handle/1 Pc Kawa: 19.5" Cast Iron With Double Handle Depth/height: 21cm (medium)/1 Pc Food Warmer/chafing Dish: Rectangular, 2l Capacity, 6 Pcs In 1 Set Stainless Steel, No Side Handle, Glass Lid Cover With Handle, Dimensions: Same Sizes - 32cm (l) X 26cm (w) X 8cm (h)1 Pc Food Glass Display (estante): 3 Layers; 20(h)x18(w)x36(l)", Aluminum Base, Glass With Screen Door/1 Pc Casserole With Double Handle: Material: Aluminum, Size: 26cm Dimension: 36(l) X 28.5(w) X 21(h)cm/2 Pcs Frying Tongs: Materials: Stainless Steel With Rubber Or Plastic Coated Handles, 12 Inch Long/1 Pc Chopping Board: Material: Polypropylene/1 Pc Chopping Knife: 10” Stainless,wood Handle/1 Pc Butcher's Knife: Materials: Stainless, Wood Handle, Size: About 10"/1 Pc Plastic Table: 4 Seaters, Square Type With Umbrella Hole At The Center, Table Dimension: 36" (length) X 36" (width) X 30" (height), Thickness: Approximately 1.5in To 2in; Color: Beige2 Pcs Monoblock Chairs: With Backrest, Seat 375mmxdepth 330mm, 2.25 Kg, Class B Plastic, Thickness: Approximately 1.5in, Color: Beige/1 Pc Beach Umbrella: 90" Diameter X 8 Ft. Height, 8 Rib Round Metal Pole, Polyester Multi-coloured Umbrella Canopy/2 Pcs Cooler Container: Chest Insulated Cooler, Materials: Polystyrene, Sizes And Capacities: 30 Liters - 45.5cm(l) X 39cm(w) X 31cm(h),color: Blue Or Red/1 Pc Grill/ Ihawan With Stand,material Of Body And Stand: Stainless , 24x12x33inches (lxwxh), Depth: 5inches/2 Pcs Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Umbrella Holder And 2 Chest Coolers Carrier (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo/2 Pcs Weighing Scale: 10kg Capacity, Colored Body / Stainless Pan, Graduation: 50g, Powder Coated Body, Pan Size: 255mm Ø X 55mm Deep, Dial Face: 185mm Ø, 4 Units/master Carton/4 Pcs Plastic Fruit Crate 21 X 15 X 12 Inches/1 Pc Hair Dryer, With 3 Temperature Setting (from High To Low): Size: Atleast 200mm (h), 74mm (w), Weight: Minimum Of 315g, Wattage: 2200w, Voltage: 120-240v, Body Material: Plastic/1 Pc 2 In 1 Steam Pro Hair Straightener (straightener & Curler): Tourmaline Ceramic Wide Plates - 1.25" Wide Heating Plate, Adjustable Temperature Display - 150-235◦c, 360◦, Swivel Cord - Tangle-free, Hanger Design, Ptc Heater - Instant Heat-up/1 Pc Hair Combs: Material: Plastic, Inclusions: Flat Comb Size - 21.5cm (l) X 4.2cm (w), Massage Comb Size: 22cm (l) X 8.5cm (w), Ribs Comb Size: 21.5cm (l) X 4cm (w), Curling Comb Size: 20.2cm (l) X 2.5cm (w), Mirror Size: Atleast 22cm (l) X 10cm (w); Storage Base Size: Atleast 10cm (l) X 15cm (w), Package Size: Approx. 22-23cm (l) X 16cm (w) X 11cm (h), Package Weight: Approx. 305g/1 Pc Hair Clips: Plastic, Product Size: Approx. 4.5", Color: Black (12pcs)/1 Pc 7pcs Face Brush Set, Inclusion: Powder Brush, Size: 17cm, Bristle Length: 3.2cm, Ferrule Width:1.9cm, Powder Buffer Brush, Size: 19cm, Bristle Length: 5cm, Ferrule Width: 2.1cm,foundation Brush, Size: 17cm, Bristle Length: 3.3cm, Ferrule Width: 2.2cm, Flat Foundation Brush, Size: 17cm,bristle Length: 3.2cm; Ferrule Width:1.2cm, Highlight Brush, Size: 16.5cm,bristle Length: 2.7cm, Ferrule Width: 2.3cm,angle Cheek Brush, Size: 17cm, Bristle Length: 3.1-2.3cm,ferrule Width: 2.4cm, Highlighting Fan Brush, Size: 16.5cm, Bristle Length: 4cm, Ferrule Width: 2.5cm, With Brush Bag/1 Pc Eyelash Curler: Material: Carbon Steel, Size: Approx. 5.91 X 3.94 X 1.97"/1 Pc Eyebrow Razor: Handle Material: Plastic, Size: Approx. 6.8(l) X 2(w) X 0.1"(h), 6pcs/pack/1 Pc Makeup Sponge Set Blender: Material: Sponge, Size: Approx. 4.02 (l) X 3.94(w) X 2.52"(h), 4pcs/set/1 Pc False Eyelashes, Product Dimensions: ‎ Approx. 0.75(l) X 3.88(w) X 5.38"(h), 5pairs/pack/1 Pc Eye Shadow Pallete: 12 Curated Peach-inspired Shades, Finish Type: Metallic, Matte, Product Dimension: Approx. 0.08 (l) X 0.04 (w) X 0.06" (h)/1 Pc Contour Palette: Multi-colored, Finish Type: Matte, Package Dimension: Approx. 5.75 (l) X 4.25 (w) X 0.5" (h)/1 Pc Hypercurl Waterproof Mascara Make Up Set: Product Dimensions: Approx. ‎0.85 (l) X 2.75 (w) X 5.63" (h), Color: Black/1 Pc Waterproof Matte Gel Eyeliner Pencil: Item Form: Pencil, Powder, Creamy, Finish Type: Matte, Product Dimensions: About‎ 5.77 X 1.97 X 0.81", Color: Black/1 Pc Eyebrow Gel, Waterproof: Weight: About 0.16 Oz, Product Dimension: Approx. 0.75 (l) X 1.9 (w) X 5.65 (h) Inches, Color Black, Brown/1 Pc Blush On, 3 Complimentary Skin-flushed Shades, Product Dimensions: Approx. 2.89 (l) X 0.43 (w) X 2.33" (h)/1 Pc Powder Blush Makeup Palette, Product Dimensions: ‎approx. 2.43 (l) X 2.43 (w) X 0.66" (h)/1 Pc Eye Shadow Palette; 12 Curated Peach-inspired Shades, Finished Type:metallic,matte, Product Dimensions:approx 0.08(l)x0.04(w) X0.06”(h)/ 1 Pc Applicator Brush And Plastic Comb: 13cm Black, Double-sided Comb, Pointed Handle For Sectioning Hair/1 Pc Hair Clipper: Electric; 110v-240v, 50-60hz,all Metal Machine, Led Light Display Stainless Steel Blade, Blade Width 45mm,low Noise High Power, 2000 Ma Lithium Battery, 210 Minutes Working Time, 4pcs Comb Guide 3/6/10/13mm, Body Size: 17x4cm, Body Weight: 371g, With Complete Accessories - Fiber Comb: Cleaning Brush, Lubricant, Charger/1 Pc Spray Bottle: 250ml Plastic Hairdressing Spray Bottle/1 Pc Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm, Length: 20.9"/52cm, Width: 14"/36cm, 4 Drawers, Blower Holder/1 Pc Curling Iron: 220v Power, 4gen; White, 32x25x13mm, Energy Efficient-48w,360degree Rotating Tail, Automatic Hair Curler, Iron Ceramic, Adjustable Size/1 Pc Apron: Length: 76cm, Width: 59cm, Color: Black, Material: Nylon, Waterproof/1 Pc Curling Rod: Small, 2cm, Cylindrical, Plastic Resin With Rubber Band Kits,multi-color/1 Pc Curling Rod: Medium, 2.5cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/1 Pc Curling Rod: Large, 3cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/1 Pc Spray Net: 600ml, 27.5cm, Hard Hold/1 Pc Hair Spray Aerosol Extra Hold: Weight: About 7ounces /198g, Scented, Package Dimensions: ‎7.83 X 6.69 X 2.17"/1 Pc Hair Trimmer: Running Time 120 Minutes Battery Powered,rechargeable Li-ion Battery 1500 Mah, Dimension: Approximately 6-7" (l) X 1.5-2.5 (w), Material: Stainless; Accessories: 4 Plastic Combs In Different Sizes 3mm, 6mm, 9mm, 12mm, Inclusions: 1 Recharging Transformer (charger), And 1 English User Manual, Input: Can Be Used For 110-240 Voltage/3 Pcs Hair Dryer, With 3 Temperature Setting (from High To Low): Size: Atleast 200mm (h), 74mm (w), Weight: Minimum Of 315g, Wattage: 2200w, Voltage: 120-240v,body Material: Plastic/3 Pcs 2 In 1 Steam Pro Hair Straightener (straightener & Curler): Tourmaline Ceramic Wide Plates - 1.25" Wide Heating Plate, Adjustable Temperature Display - 150-235◦c, 360◦, Swivel Cord - Tangle-free; Hanger Design, Ptc Heater - Instant Heat-up/3 Pcs Hair Combs: Material: Plastic, Inclusions: Flat Comb Size - 21.5cm (l) X 4.2cm (w), Massage Comb Size: 22cm (l) X 8.5cm (w), Ribs Comb Size: 21.5cm (l) X 4cm (w),curling Comb Size: 20.2cm (l) X 2.5cm (w), Mirror Size: Atleast 22cm (l) X 10cm (w), Storage Base Size: Atleast 10cm (l) X 15cm (w),package Size: Approx. 22-23cm (l) X 16cm (w) X 11cm (h), Package Weight: Approx. 305g/3 Pcs Hair Clips: Plastic, Product Size: Approx. 4.5",color: Black (12pcs)/3 Pcs Disposable Latex Free Gloves: Non-sterile, 100 Pcs Per Pack, Product Dimensions: Approx.‎ 8.6" (l) X 4.9" (w) X 3" (h), Weight: 1.25 Pounds, Material: Synthetic Pvc/3 Pcs Cutting Scissors: 6" Stainless Steel, 65g/3 Pcs Thinning Scissors: 17.5x5cm Stainless Steel/3 Pcs Drip Pan: 32cmx35cm Plastic, Black/3 Pcs Hair Clipper: Electric,110v-240v, 50-60hz,all Metal Machine,led Light Display Stainless Steel Blade, Blade Width 45mm, Low Noise High Power, 2000 Ma Lithium Battery, 210 Minutes Working Time, 4pcs Comb Guide 3/6/10/13mm, Body Size: 17x4cm, Body Weight: 371g,with Complete Accessories - Fiber Comb, Cleaning Brush, Lubricant, Charger/3 Pcs Nail Tool Set: Material: Stainless Steel, Case: Leather, Package Size: Approximately 15-15.5cm (l) X 8cm (w) X 2cm (h),inclusions: Cuticle Trimmer (95mm), Blackhead Needle And Loop Remover (83mm), Eyebrow Tweezer (86mm) Peeling Knife (90mm), Nail File (75mm), Ear Pick (78mm), Double Pick (75mm), Dead Skin Fork (86mm), Small Pedicure Plier (95mm), Acne Needle (83mm), Small Nail Clipper (62mm) Bevel Nail Clipper (61mm), Large Nail Clipper (82mm), Beauty Tip Scissor (89mm), Pusher/3 Pcs Cotton Balls: 300g (100 Pcs Large Cotton Balls)/3 Pcs Nail Polish: Volume: 15ml, With 24 Colors Inclusions: 14k Gold, 18k Gold, 24k Gold, African Plum, Baby Pink, Black Velvet, Carolina Peach, Cashmere, Emerald Shimmer, Golden Bronze, Italian Nude, Platinum Special, Pussy Red, Red Pearl, Saphire Glow, Silver Platinum, Simply Red, Tahiti Brown, White Satin, White Rose, Platinum Silver, Touch Of Tan, Touch Of Beige, Colorless/3 Pcs Foot Spa Soaker: With Pumice Stone, Package Dimensions: Approximately 16.42" X 13.58" X 7.91", Weight: About 4.63 Pounds, Rated Power: 500 Watts, Rated Voltage: 110~120v, Rated Frequency: 50hz, Temperature Adjustable Range: 35℃ To 48℃/3 Pcs Astringent Foot Soaker: 128oz/3 Pcs Cooling Foot Soak: Product Dimensions: ‎approximately 6.5-7" X 2.38-2.50" X 9.259.50", Weight: Atleast 900g/3 Pcs Exfoliating Foot Scrub: Package Dimensions: Approximately‎ 7.05-7.50" X 2.32-3" X 1.97-2", Weight: Atleast 6oz/3 Pcs Foot File And Callus Remover: Material: Metal, Steel, Item Dimensions: Approx. 10-10.78" X 2.7" X 0.29", Item Weight: 3.2 Pounds/3 Pcs Foot Scrub/3 Pcs Manicurist Bag: Made Of Heavy Duty Nylon, Large Capacity: Enough Room To Hold Up To 42 Bottles Of 15ml Nail Polish, Size: Approx. 8-9" (l) X 6-7" (w) X 4-5" (h)/3 Pcs Spray Bottle: 250ml Plastic Hairdressing Spray Bottle/3 Pcs Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm, Length: 20.9"/52cm, Width: 14"/36cm, 4 Drawers, Blower Holder/3 Pcs Apron: Length: 76cm, Width: 59cm,color: Black,material: Nylon, Waterproof/3 Pcs Alcohol: 70% Ethyl Alcohol With Moisturizer,500ml/3 Pcs Shampoo: 1000ml, Green Apple And Citrus Lemon Variant/3 Pcs Hair Spa: 1000ml, Lavender And Strawberry Variant/3 Pcs Hot Oil: Keratin Organic Hot Oil, 1000ml, Aloe Vera Variant/3 Pcs Hair Cellophane: 500ml, Natural, Brown,burgundy And Ash Blonde Variant/3 Pcs Hair Rebonding Set: 1000ml Hair Straightening And Hair Neutralizing (ion Perm)/3 Pcs Hair Color Dye:100 Ml, 2pcs Each (black, Dark Brown, Medium Brown, Light Brown, Blonde, Light Blond, Lighter Blonde, Lightest Blonde, Dust)/3 Pcs Hair Color Developer: 100ml 2pcs Each 6%, 9%, 12% Oxidizer/3 Pcs Hair Bleaching Powder: 500g/3 Pcs Brazilian Blowout: 120ml, 3-in-1 Set (clarifying Shampoo, Brazilian Blowout, After Treatment Conditioner)/24 Pcs Hair Dryer, With 3 Temperature Setting (from High To Low): Size: Atleast 200mm (h), 74mm (w), Weight: Minimum Of 315g, Wattage: 2200w, Voltage: 120-240v, Body Material: Plastic/24 Pcs 2 In 1 Steam Pro Hair Straightener (straightener & Curler): Tourmaline Ceramic Wide Plates - 1.25" Wide Heating Plate, Adjustable Temperature Display - 150-235◦c, 360◦,swivel Cord - Tangle-free, Hanger Design, Ptc Heater - Instant Heat-up/24 Pcs Hair Combs: Material: Plastic, Inclusions: Flat Comb Size - 21.5cm (l) X 4.2cm (w), Massage Comb Size: 22cm (l) X 8.5cm (w), Ribs Comb Size: 21.5cm (l) X 4cm (w), Curling Comb Size: 20.2cm (l) X 2.5cm (w), Mirror Size: Atleast 22cm (l) X 10cm (w), Storage Base Size: Atleast 10cm (l) X 15cm (w), Package Size: Approx. 22-23cm (l) X 16cm (w) X 11cm (h), Package Weight: Approx. 305g/24 Pcs Hair Clips: Plastic, Product Size: Approx. 4.5", Color: Black (12pcs)/24 Pcs Disposable Latex Free Gloves: Non-sterile, 100 Pcs Per Pack, Product Dimensions: Approx.‎ 8.6" (l) X 4.9" (w) X 3" (h), Weight: 1.25 Pounds, Material: Synthetic Pvc/24 Pcs Drip Pan: 32cmx35cm Plastic, Black/24 Pcs Shower Caps: 32cm, Thick Plastic, Elastic, Washable/24 Pcs Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm, Length: 20.9"/52cm, Width: 14"/36cm, 4 Drawers, Blower Holder/24 Pcs Curling Iron: 220v Power, 4gen, White, 32x25x13mm, Energy Efficient-48w, 360degree Rotating Tail, Automatic Hair Curler, Iron Ceramic, Adjustable Size/24 Pcs Hair Steamer: With 4 Wheels, 360degrees Movable, Gray Color, Adjustable Height With Timer And Control/120 Pcs Cape: 140x110cm, Satin, Nylon, Waterproof, Black/72 Pcs Microfiber Towel: 25x65cm, 135g, Microfiber, Dark Colors/24 Pcs Curling Rod:small, 2cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/24 Pcs Curling Rod: Medium, 2.5cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/24 Pcs Curling Rod: Large, 3cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/120 Pcs Ear Caps: (l X W X T): 8cm X 4.5cm X 2.1cm/3.15" X 1.77" X 0.83", Black,plastic/24 Pcs Shampoo: 1000ml, Green Apple And Citrus Lemon Variant/24 Pcs Hair Spa: 1000ml, Lavender And Strawberry Variant/24 Pcs Hot Oil: Keratin Organic Hot Oil, 1000ml, Aloe Vera Variant/24 Pcs Hair Cellophane: 500ml, Natural, Brown, Burgundy And Ash Blonde Variant/24 Pcs Hair Rebonding Set: 1000ml Hair Straightening And Hair Neutralizing (ion Perm)/24 Pc Hair Color Dye:100 Ml, 2pcs Each (black, Dark Brown, Medium Brown, Light Brown, Blonde, Light Blond, Lighter Blonde, Lightest Blonde, Dust)/24 Pcs Hair Color Developer: 100ml 2pcs Each 6%, 9%, 12% Oxidizer/24 Pcs Hair Bleaching Powder: 500g/24 Pcs Brazilian Blowout: 120ml, 3-in-1 Set (clarifying Shampoo, Brazilian Blowout, After Treatment Conditioner)/24 Pcs Hair Shear: Material: Stainless Steel, 1 Precision Scissor Approximately 6-7",1 Thinning Scissor Atleast 6", Accesories: Scissors Oil Atleast 5ml/34 Pcs Angle Grinder Cutting Disk: 10 Pcs. Per Set, Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8")/34 Pcs Crow Bar: At Least 36" Long,length Tolerance: +- 1/8, Material: Forged Steel Carbon/34 Pcs Claw Hammer: Round Head, Head Weight: At Least 16oz, Overall Weight: Approximately 17oz-23oz, Head Material: Forged Steel, Handle Material: Fiberglass Handle With Rubber Cushion, Overall Length: Approximately 12-14"/34 Pcs Hacksaw With Blade: Material: Aluminum Alloy Frame With Soft-grip Handle, At Least 12"-15" Long Including Handle, With Soft-grip Rubber Handle, Bi-metal, Blade Length: About 30cm, Width: 3cm/34 Pcs Meter Tape With Magnetic Hook: Blade Material: Nylon Coated Blade, Dimensions: 16ft (l) X 25mm (w)/34 Pcs Handsaw: Blade Length: About 15",blade Material: Carbon Steel, Handle Length: 5", Handle Material: Plastic/rubber, Color: Gray,8 Teeth Per Inch/34 Pcs Shovel: Round End, Tempered Steel Blade: 17-23 Cm, Blade Tip Width, 22-28cm Blade Tip Length, All Metal Handle, Overall Length: 100cm-115 Cm, Capacity: 350-400 Lbs/34 Pcs Shovel: Rectangular End, Tempered Steel Blade: 22-26 Cm, Blade Tip Width, 22-28cm Blade Tip Length, All Metal Handle, Overall Length: 100cm-115 Cm/34 Pcs Level Bar: Aluminum Frame, Length: At Least 24"/60cm, Aluminum Thickness: 1.5mm, Double Side Milles, 0.5mm/m Accurate Vials/34 Pcs Steel Float/plastering Trowel: Thickness: At Least 0.7 Mm, Surface Measurement, Length: 12", Width: 4", Mmaterial: High Carbon Steel With Wood Handle/34 Pcs Steel Square: Carpenter's Framing Square, Blade Width: 2" Scale: At Least 16" (l) X 24" (w), Material: Steel/34 Pcs Masonry Trowel: Length: At Least 12"long, Width: 6", Material: Flat Steel, With Wood Handle/34 Pcs Circular Saw: Voltage: 220-240v, Frequency: 50-60hz, Input Power: 1400w, No-load Speed: Atleast 4800rpm, Blade Diameter: 185mm, Cutting Capacity: 45degree: 44mm, 90 Degree: 65mm, Maximum Cutting Depth: Atleast 90°62mm, Weight: Maximum Of 5.2kg, Item Approximate Dimension: 15-17cm (h), 25-28cm (w), 30-35cm (l)/34 Pcs Masonry Square/metric Square: Material: Aluminum, Length: Approx. 24", Width: 16", 1/8 '' Thickness/34 Pcs Mason's Level: At Least 48'' Long, Aluminum Reinforced Frame, 60cm Only/34 Pcs Sledgehammer: Weight: At Least 3 Lbs With Fiberglass Handle, Forged Steel Round Head, Length: Approximately 25-27"/34 Pcs Concrete Chisel: Pointed Sharp End, Material: Forged Steel Chisel, With Rubberized Handle, Length: Approximately 10''/34 Pcs Putty Knife/paint Scraper Set (4pcs): Stainless Steel Blade With Rubberized Handle, Blade Width: 1", 2" And 3", Length Including Handle: Approximately 8-9"/34 Pcs Mason's Line: #18 Braided Nylon, 500 Ft/roll, Color Orange/34 Pcs Hammer Drill: Electric, 1980w 220v, Rated Frequency: 50/60hz, Load Speed: 0-3800rpm (revolutions Per Minute), Chuck: 13mm With Ergonomic Anti-slip Handle/34 Pcs Angle Grinder: Rated Input Power: 730w, Wheel Diameter: 4",rated Voltage: 220v, Frequency: 60hz, No Load Speed: 12,000 Rpm, Weight: Approximately 1.6kg, Grinding Spindle Thread: M10, Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h )/34 Pcs Wooden Float: Size: At Least 12x4", Has 5/8" Thick Rubber Pad, With Wooden Handle/4 Pcs Nail Tool Set: Material: Stainless Steel, Case: Leather, Package Size: Approximately 15-15.5cm (l) X 8cm (w) X 2cm (h), Inclusions: Cuticle Trimmer (95mm), Blackhead Needle And Loop Remover (83mm), Eyebrow Tweezer (86mm) Peeling Knife (90mm), Nail File (75mm), Ear Pick (78mm), Double Pick (75mm), Dead Skin Fork (86mm), Small Pedicure Plier (95mm), Acne Needle (83mm), Small Nail Clipper (62mm) Bevel Nail Clipper (61mm), Large Nail Clipper (82mm), Beauty Tip Scissor (89mm), Pusher/4 Pcs Cotton Balls: 300g (100 Pcs Large Cotton Balls)/4 Pcs Nail Polish: Volume: 15ml, With 24 Colors Inclusions: 14k Gold, 18k Gold, 24k Gold, African Plum, Baby Pink, Black Velvet, Carolina Peach, Cashmere, Emerald Shimmer, Golden Bronze, Italian Nude, Platinum Special, Pussy Red, Red Pearl, Sapphire Glow, Silver Platinum, Simply Red, Tahiti Brown, White Satin, White Rose, Platinum Silver, Touch Of Tan, Touch Of Beige, Colorless/4 Pcs Foot Spa Soaker: With Pumice Stone, Package Dimensions: Approximately 16.42" X 13.58" X 7.91", Weight: About 4.63 Pounds, Rated Power: 500 Watts, Rated Voltage: 110~120v, Rated Frequency: 50hz, Temperature Adjustable Range: 35℃ To 48℃/2 Pcs Astringent Foot Soaker: 128oz/2 Pcs Cooling Foot Soak: Product Dimensions: ‎approximately 6.5-7" X 2.38-2.50" X 9.259.50", Weight: Atleast 900g/2 Pcs Exfoliating Foot Scrub: Package Dimensions: Approximately‎ 7.05-7.50" X 2.32-3" X 1.97-2", Weight: Atleast 6oz/4 Pcs Foot File And Callus Remover: Material: Metal, Steel, Item Dimensions: Approx. 10-10.78" X 2.7" X 0.29", Item Weight: 3.2 Pounds/2 Pcs Foot Scrub/2 Pcs Manicurist Bag: Made Of Heavy Duty Nylon, Large Capacity: Enough Room To Hold Up To 42 Bottles Of 15ml Nail Polish, Size: Approx. 8-9" (l) X 6-7" (w) X 4-5" (h)/6 Pcs Microfiber Towel: 25x65cm, 135g, Microfiber,dark Colors/2 Pcs Alcohol: 70% Ethyl Alcohol With Moisturizer, 500ml/1 Pc Double Burner Gas Stove: Stainless Top And Front, Automatic Ignition ,reversible Trivet, Double Detachable Top Burner, Removable Drip Pan, Dimension: 730mm(l) X 395mm(w) X 105mm(h)/1 Pc Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/2 Pcs Kawa: 19.5" Cast Iron With Double Handle Depth/height: 21cm (medium)/1 Pc Plastic Table: 4 Seaters, Square Type With Umbrella Hole At The Center, Table Dimension: 36" (length) X 36" (width) X 30" (height), Thickness: Approximately 1.5in To 2in, Color: Beige/1 Pc Monoblock Chairs: With Backrest, Seat 375mmxdepth 330mm, 2.25 Kg, Class B Plastic, Thickness: Approximately 1.5in, Color: Beige/1 Pc Peanut Grinding Machine: Electric, 220v, 300w, 50-60hz,material: High Quality Stainless Steel Body And Base, Color: Black, Dimension: Approx. Length: 43.5cm, Width: 23cm, Height: 13.5cm/1 Pc Hand Cobbler Shoe Repair Machine Dual Cotton Nylon Line Sewing Machine Manual Leather Machine Shoe Sewing Machine Color Silver: Product Dimensions 14.4"d X 20.5"w X 5.5"h, Material: Cast Iron Item Weight: 22 Pounds, Power Source: Crank/5 Pcs Wooden Handle Shoes Repairing Awl Shoe Sewing Tool Diy Craft Repair Hand Straight Hook Shoes Sewing Awl Type: Shoes Sewing Awl Material: Wood+metal, Features: Shoes Sewing Awl, Repair Hand , Crochet Needle Tool Dimension: 1: App.2x13.5x6cm/0.79x5.31x2.36in 2: App.2x13x5.5cm/0.79x5.12x2.17in 3: App.2x13x5.5cm/0.79x5.12x2.17in, Color: Wood Color + Silver/5 Pcs Upholstery Stitching Thread Black 100 Mtr. 1 Pc Upholstery Hand Stitching Tools For Belts, Saddles, Shoes, Fabric Household Use Handwork Sewing Leather Craft Shoes Repairing/5 Pcs Upholstery Stitching Thread Brown 100 Mtr 1 Pc Upholstery Hand Stitching Tools For Belts, Saddles, Shoes, Fabric Household Use Handwork Sewing Leather Craft Shoes Repairing/5 Pcs Upholstery Stitching Thread White 100 Mtr. 1 Pc Upholstery Hand Stitching Tools For Belts, Saddles, Shoes, Fabric Household Use Handwork Sewing Leather Craft Shoes Repairing/2 Pcs Angle Grinder Cutting Disk: 10 Pcs. Per Set, Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8")/2 Pcs Angle Grinder: Rated Input Power: 730w, Wheel Diameter: 4", Rated Voltage: 220v,frequency: 60hz, No Load Speed: 12,000 Rpm, Weight: Approximately 1.6kg, Grinding Spindle Thread: M10, Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h)/2 Pcs Chipping Hammer: Item Weight: ‎at Least 13.8 Ounces, Product Dimensions: ‎11" (l) X 1" (w) X 7.5" (h), Material: Genuine Leather Grip And Forged Steel/2 Pcs Heavy Duty Corded Drill: Rated Input Power: 750w, Chuck Capacity: Up To 13mm, Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm), Dimension: 268mm (l) X 69mm (w) X 192mm (h), Weight W/out Cable: Approximately 1.6-1.8 Kg, Spindle Collar Diameter Of 43 Mm/2 Pcs Metal Drill Bit Set: Material: High Speed Steel, 19pcs Per Set(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm,7.5mm,8mm,8.5mm,9mm,9.5mm,10mm), Point Angle: 118degree C, Standards: Din 338, Bit Geometry: Standard Twist Bit/2 Pcs Mig Welding Pliers: Overall Length: Atleast 210mm, Material: High Carbon Steel, Handle Material: Thermoplastic Rubber/2 Pcs Needle File Set: (6 Pieces Hand Metal Files, Hardened Alloy, Strength Steel Set Includes Flat, Flat Warding, Square, Triangular, Round, And Half-round File), Color Black, Metal Type: Carbon Steel, Handle Material: Wood, Alloy Steel, Item Dimensions: Approximately 6.1" (l) X 3" (w) X 0.5" (h)/2 Pcs Portable Welding Machine: Input Voltage: 220-240, Frequency: 50-60hz, Output Current: 10-220a, Led Display, No-load Voltage: 85v, Max. Output Current: 220a, Diameter Of Electrode: 1.6-3.2mm, Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable/2 Pcs Speed Square: Material: Cast Aluminum, Size: About 18x18x2cm/7.09x7.09x0.79", Weight: About 130g,triangle-shaped/2 Pcs Welding Helmet: Auto Darkening Helmet: Power Supply: Battery And Solar Powered, Light Shade: Din9-1, Dark Shade: Din4, Switching Time: 1/25000s, Delay Time: 0.1-0.8s, Sensitivity Adjustment: Stepless Control, Operation Temperature: -5 Degrees- 55 Degrees, Active Viewing Area: 93mmx43mm, Active Viewing Area Size: (+/- 10mm), Item Weight: At Least 1.85 Pounds, Package Dimensions: ‎approximately 12-12.4" (l) X 9-9.61" (w) X 7-7.68" (h)/2 Pcs Welding Magnets: 6 Pcs/set, Overall Length: At Least (3"), Hold Capacity: Up To 25lbs, Arrow Design Supports Angle: 45°, 90°, And 135°, Item Weight: 295g, Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches, ‎material: Steel, Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm)/2 Pcs Welding Suit: 100% Cotton With Pyrovatex, 2 Back Pockets And Rule Pocket With Safety Gusset Feature, High Quality And Long Lasting, Two Way Zipper, Approximate Cloth Size: Large/10 Pcs Camping Dome Tent: Product Dimensions: 82.7"l X 55"w X 43.5"h, Item Weight: 4 Pounds Shape: D Shape Occupancy: 2 Person Included Components: Carry Bag, Stakes, Rainfly Water Resistance Technology 1000 Millimeters, Special Feature: Windproof, Sun Protection/outdoor Mat (banig):size (48" X 75") Material: Palm Leaves (buri)/10 Pcs Double Burner Gas Stove: Stainless Top And Front, Automatic Ignition ,reversible Trivet, Double Detachable Top Burner, Removable Drip Pan, Dimension: 730mm(l) X 395mm(w) X 105mm(h)/2 Unit Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/1 Unit Gas Range: Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h), 4-gas Burner, 62l Gas Oven, Button Ignition, Top Glass Lid, Net Weight: Maximum Of 28kg, Pan Support: Light Cast Iron Pan Support/5 Pcs Kawali: Aluminum, (diameter X Height) 28cmx8cm With Double Handle/2 Pc S Kawa: 19.5" Cast Iron With Double Handle Depth/height: 21cm (medium)/5 Pcs Wok Ladle: Material: Stainless Steel With Wooden Handle: Total Length Of Item: 24 Inches/5 Pcs Wok Spatula: Material: Stainless Steel With Wooden Handle, Total Length Of Item:24 Inches/5 Pcs Stainless Steel Long Wooden Handle Skimmer Strainer: Material: Stainless Steel, Size: 32.3*11.5cm/5 Pcs Casserole With Double Handle: Material: Aluminum, Size: 26cm, Dimension: 36(l) X 28.5(w) X 21(h)cm/5 Pcs Frying Tongs: Materials: Stainless Steel With Rubber Or Plastic Coated Handles, 12 Inch Long/5 Pcs Chopping Board: Material: Polypropylene Plastic: 8"(w) X 10"(l), 1cm (thickness)/5 Pcs Chopping Knife: 10" Stainless; Wood Handle/5 Pcs Grill/ Ihawan With Stand, Material Of Body And Stand: Stainless, 24x12x33inches (lxwxh), Depth: 5inches/1 Unit Heavy Duty Commercial Micromatic Big 7.8l Mrc-50 Rice Cooker 45cups (white)/10 Dz Melamine Round Dinner Plate: 9" Diameter, Color; White/10dz Platito (saucer): Material: Melamine Plastic, Standard Size: 6 Inch (diameter) X ¾ Inch Height/10 Pcs Serving Tray Bamboo - Wooden Tray With Handles, Color Brown Material Wood, Product Dimensions 17"l X 11"w X 2"h/10dz Drinking Glass: 8 Oz, Glass, Product Size: Base Diameter-7cm, Top Diameter: 7cm, H-11.4cm, Heat Resistant, Dishwasher Safe/10dz Spoon: Stainless, 12pcs/per Pack, Size: 8"/10dz Fork: Stainless, 12 Pcs/per Pack, Size 8"/5dz Mangkok (round Shape Bowl), Materials: Ceramic, Size: 6inch (diameter) X 5cm (height)/5 Pcs Storage Box With Wheels For Easy Transport, Measurements: L72 X W52 X H44cm, Food Grade Material, 120l Capacity, Stackable; With Lid And Handle, Color: White/2 Pcs Butcher's Knife: Materials: Stainless, Wood Handle, Size: About 10"/5 Pcs Gallon Acrylic Juice Dispenser Type: Type: Water/juice Dispensers, Overall Dimensions: Height:32 1/2 Inches, Top Diameter: 6 11/16 Inches, Capacity:1.1 Gallons, Base Material: Stainless Steel, Container Material: Acrylic, Style: Single/5 Pcs Chafing Dish Food Warmer Buffet Set: Size: 1/1pan*3, Color: Silver, Material: Stainless Steel, Product Dimensions: 13.39"l X 15.35"w X 23.62"h, Capacity: 8 Quarts/5 Pcs Chest Cooler: Item Package Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h), Package Weight: ‎5.76kg, Inside Dimensions: 24.95" (l) X 14.58" (w) X 14.77" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l , Color: Blue Or Red/5 Pcs Matress: Size: Semi Double (48" X 75"), Thickness: 4"/15 Pcs Matress Size: Queen (60" X 75") Thickness: 4"/15 Pcs Pillow: Size: Standard (20" X 26")/10 Sets Bed Linen Set Of 3pcs, 1-bed Sheet Size (48" X 75"), 2-pillow Case (20" X 26")/2 Sets Bed Linen Set Of 3pcs: 1-bed Sheet Size (60" X 75"), 2-pillow Case (20" X 26")/6 Unit Electric Fan: Color: Black, Electric Fan Design: Floor Fan, Power Source: Corded Electric Style: 3-speed Ac Motor Fan, Product Dimensions: 15.75"d X 17.72"w X 53.15"h, Room Type: Bedroom, Special Feature: Oscillating, Adjustable Height, Adjustable Tilt,wattage: 60 Watt/4 Unit Industrial Ceiling Fan: Product Material: Cast Aluminum Casing, Product Specifications: 2000mm, Operating Voltage: 220v, Wind Speed: 5th Gear, Number Of Fan Product Color: Black, White, Product Power: 165w, Blades: 6 Blades/150 Pcs Monoblock Chairs: With Backrest, Seat 375mmxdepth 330mm, 2.25 Kg, Class B Plastic, Thickness: Approximately 1.5in, Color: White/15 Pcs Solid Top Round Table: Material: Plastic, Color: White, Size(cm): 115 X 74 X 4.5, Foldable Legs,diameter: 45″, 6 To 8 Seater Capacity B. Completed Within The Last Two(2) Years From The Date Of The Submission Of Bids 7.1 Not Applicable Since Sub-contracting Is Not Allowed. 12 The Price Of Goods Shall Be Quoted Ddp Lgu-irosin, Irosin, Sorsogon. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration Or Any Of The Following Forms And Amounts: A. [two Percent (2%) Of Abc], If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; B. [five Percent (5%) Of Abc] If Bid Security Is In Surety Bond. 19.3 Various Supplies And Materials For Dole Integrated Livelihood Program And Sustainable Industry Project 4 Pcs Barber Brush: 23.3cmx7cm, Soft Fiber Material And Wooden Handle/4 Pcs Hair Clipper: Electric, 110v-240v, 50-60hz,all Metal Machine,led Light Display Stainless Steel Blade, Blade Width 45mm,low Noise High Power, 2000 Ma Lithium Battery, 210 Minutes Working Time,4pcs Comb Guide 3/6/10/13mm,body Size: 17x4cm, Body Weight: 371g,with Complete Accessories - Fiber Comb, Cleaning Brush, Lubricant, Charger/4 Pcs Paddle Brush:body Material: Wood, Dimensions: (lxwxh) 25x8x3cm, Brown/8pcs Spray Bottle: 250ml Plastic Hairdressing Spray Bottle/4pcs Hair Blower: 4000w Accurate Power,2-speed Settings (high & Low), 3 Temperature (cold, Hot & Hotter), Glossy, Thick Long Wires, With Light And Perfume Button/4pcs Hair Blower: 4000w Accurate Power,2-speed Settings (high & Low), 3 Temperature (cold, Hot & Hotter), Glossy, Thick Long Wires,with Light And Perfume Button/4pcs Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm,length: 20.9"/52cm,width: 14"/36cm,4 Drawers, Blower Holder/4pcs Talcum Powder: 200g, Hypo-allergenic, Dermatologist Tested/4 Pcs Cordless Clipper: Body Material: Aluminum,motor: Rotary,power/source Battery: Lithium-ion Battery (90+ Minutes Of Runtime), Blades: Titanium Blades, 3 Guide Combs Plastic Material (#1/2, #1, And #1½),cutting Lengths: 0.4-25mm,inclusions: A Blade Guard, 1 Recharging Transformer (charger), 1 Cleaning Brush, With Lubricating Oil Of At Least 5 Ml And English User Manual,product Dimension: Approximately 6.5-7" (l) X 2-3" (w),weight: Maximum Of 400g, Input: Can Be Used For 110-240 Voltage/4pcs Hair Trimmer: Running Time 120 Minutes Battery Powered, Rechargeable Li-ion Battery 1500 Mah, Dimension: Approximately 6-7" (l) X 1.5-2.5 (w), Material: Stainless,accessories: 4 Plastic Combs In Different Sizes 3mm, 6mm, 9mm, 12mm, Inclusions: 1 Recharging Transformer (charger) And 1 English User Manual, Input: Can Be Used For 110-240 Voltage/4pcs Electric Shaver: With 3d Floating Cutter Head, 40mins. Running Time For 8hrs Fully Charged, Material: Stainless Steel,product Dimension: Approximately 6.5-7" (l) X 2-3" (w),automatic Voltage 100-240v,battery: 2 Cell Nickel-metal Hydride Cylindrical Battery Pack, 4000mah,power Type: Rechargeable/4pcs Hair Shear: Material: Stainless Steel,1 Precision Scissor Approximately 6-7",1 Thinning Scissor Atleast 6",accesories: Scissors Oil Atleast 5ml/4 Pcs Razor Blades: 10pcs/box (double Edge Stainless)/4 Pcs Shaving Razor/labaha: Dimensions: Approximately 5-6" (l) X 3/4-1" (w), Material: Carbon Steel, Color: Black/ 4 Pcs Barber Skin Fade Brush: Handle: Wood, With Soft Bristles 1" (l),dimensions: Atleast 5.5" (l) X 1" (w)/4pcs Comb Set: (4pcs/set), Material: High Quality Plastic, Inclusions: #1-approx. Size: 4.88" (l) X 1.02" (w), #2-approx. Size: 7.09" (l) X 1.46" (w), #3-approx. Size: 7.87" (l) X 1.18" (w), #4-6.10" (l) X 0.20" (w)/4pcs Shaving Gel: (foam), 195g/4pcs Barber's Cape: Color: Black,about 140cm (l) X 110cm (w), Cloth: Polyester/4pcs 360 Degree Swivel Barber Chair: Classic Back Seat With Chrome Steel Base, Premium Steel Frame And High Class Foot Pump, Heavy Duty Leather Cover; Lower Height - At Least 51cm, Top Height - At Least 61cm, Sandles Height - At Least 40cm/8pcs Barber Apron: With Two Pockets, Waterproof, Material: Cotton And Acrylic, Item Size: Approx. 38-38.19" (l) X 27-27.36" (w)/ 4pcs Pomade: 80g, Water-based/26pcs Speed Square: Material: Cast Aluminum, Size: About 18x18x2cm/7.09x7.09x0.79", Weight: About 130g, Triangle-shaped/26pcs Meter Tape With Magnetic Hook: Blade Material, Nylon Coated Blade,dimensions: 16ft (l) X 25mm (w)/26pcs Circular Saw: Voltage: 220-240v, Frequency: 50-60hz, Input Power: 1400w, No-load Speed: Atleast 4800rpm, Blade Diameter: 185mm, Cutting Capacity: 45degree,44mm, 90 Degree: 65mm,maximum Cutting Depth: Atleast 90°62mm, Weight: Maximum Of 5.2kg,item Approximate Dimension: 15-17cm (h), 25-28cm (w), 30-35cm (l)/26pcs Angle Grinder: Rated Input Power: 730w, Wheel Diameter: 4", Rated Voltage: 220v,frequency: 60hz, No Load Speed: 12,000 Rpm, Weight: Approximately 1.6kg, Grinding Spindle Thread: M10, Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h )/26pcs Angle Grinder Cutting Disk: 10 Pcs. Per Set, Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8")/26 Pcs Portable Hand Drill: Power Sourced: Battery Powered - 2pc 21 Volt 1500mah Lithium-ion Batteries, Maximum Rotational Speed: 1500 Rpm, Voltage: 210v,amperage: 1.5 Amps, Chuck Size: 0.38",bit Heads Diameters: From 0.8mm-10mm,product Dimensions: ‎9.6" (l) X 2.1" (w) X 7.5" (h), Material: ‎plastic, Rubber, Metal, Item Dimensions: Approx. ‎9.6" (l) X 2.1" (w) X 7.5" (h),item Weight: Atleast ‎2.5 Pounds,item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Inspiritech Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws,1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag/26pcs Wood Planer: Rated Voltage: 220v, Rated Input Power: 600w, Cutting Width: 82mm, Load Speed: 15,000rpm, Frequency: 60hz, Weight: 3kg./26 Pcs Framing Hammer: Handle Material: Alloy Steel, Item Dimensions: Approximately 16-17" (l) X 5.75-6" (w) X 1.5-2" (h), Item Weight: Atleast 1.4 Pounds/26 Pcs Trim Hammer: Handle Material: Wood, Head Material: Alloy Steel; Item Dimensions Approximately: 14-15" (l) X 5-6"(w) X 1-2" (h),item Weight: Atleast 594 Grams/26pcs Roofing Hammer: Item Weight: ‎1.25 Pounds, Product Dimensions: Approx. 13.7" (l) X 6.75" (w) X 1.5" (h)/26 Pcs Chalk Line: Item Weight: 10.6 Ounces, Product Dimensions: ‎approx. 1200" (l) X 4.72" (w) X 5.91" (h) Inches, Color: ‎blue, Material Type: Alloy Steel, Rubber/26 Pcs Utility Knife: Handle Material: Aluminum, Material: Aluminum Alloy, Weight: 120g/pcs, Blade Size: 19mm (w) X 61mm (h) X 0.6mm (t),blade Material: Steel, Thickness: Atleast 0.6mm/26 Pcs Tin Snips: Item Weight: ‎atleast 1 Pound, Package Dimensions: Approx. 12.36" (l) X 3.7" (w) X 1.3" (h),size: ‎long Straight, 12 Inches Long, Blade Length: 3.20",material: Steel, Cutting Thickness Range Up To 1.2mm Carbon Steel And 0.7mm/26 Pcs Framing Square: Shorter Leg Measures At 8 Inch Outside And 6.5 Inch Inside, Longer Leg Measures At 12 Inch Outside And 11 Inch Inside,material: Carbon Steel/26 Pcs Level: Box Beam Style, Material: Aluminum,dimension: Approximately 24-24.5" (l) X 2-2.6" (w) X 1.2-1.5" (h), Weight: Atleast 0.8 Pounds/26 Pcs Electric Planer: Voltage: 220-240v,input Power: 1050w, No Load Speed: 1600rpm, Planing Width And Depth,82x3mm,heavy Duty Aluminum Base/1 Pc Meter Tape With Magnetic Hook: Blade Material: Nylon Coated Blade, Dimensions: 16ft (l) X 25mm (w)/1 Pc Air Compressor Machine: Motor Power: 1hp, Size: Approx. 935x385x800mm,voltage: 220-240v, 60hz, Speed: 3400 Rpm, Tank Capacity: 24l , Operating Pressure: Max 8 Bar, Air Displacement: 93l/min, Pump Lubricated With Oil/1 Pc Blue Painters Tape, Color: Blue, Size: Atleast 1.41" X 20m,thickness: 0.13mm, Item Weight: 1.92 Pounds, Material: Paper/2pcs Electric Spray Gun: Voltage: 220-240v~50/60hz,spraying Pressure: 0.1-0.2 Bar, Max Flow: 850ml/min, Max Viscosity: 50din-s, Container Capacity: Atleast 800ml,power Cord Length: 2m, Rated Power 500w, Spraying Pressure: Atleast 0.1-0.2bar, Item Dimensions: Approximately 13" (l) X 5" (w) X 11" (h)/1 Pc Extension Pole, (3 Stage Extender) Reach: 1.5-to-3ft,weight: Maximum Of 0.5 Pounds, Max. Standing Reach: 10ft, Material : Aluminum/2 Pcs Paint Brush Set, 5 Pcs/set, Material: Synthetic Bristle, Wood Handle, Overall Length: Atleast 11", Bristles Length: Atleast 3", Brush Width: 1", 1-1/2" 2", 2-2.5", 3"and 4"/ 5 Pcs Paint Roller, Material: Plastic,package Dimensions: Approximately 15.16" (l) X 11.22" (w) X 3.15" (h),item Weight: Atleast 1.06 Pounds, Inclusion: Roller, Atleast 7" In Length, Material: Polyester/2 Pcs Painters Gloves, 12 Pcs/pack, Material: Cotton, Color: Red/1 Pc Putty Knife/paint Scraper Set (4pcs), Stainless Steel Blade With Rubberized Handle, Blade Width: 1", 2" And 3", Length Including Handle: Approximately 8-9"/1 Pc Steel Float/plastering Trowel: Thickness: Atleast 0.7 Mm, Surface Measurement, Length: 12", Width: 4", Material: High Carbon Steel With Wood Handle/2 Pcs Lpg Tank With Gas Regulator And Accessories, Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/2 Pcs Kawali: Aluminum, (diameter X Height) 28cmx8cm With Double Handle/2 Pcs Food Warmer/chafing Dish: Rectangular, 2l Capacity, 6 Pcs In 1 Set Stainless Steel, No Side Handle, Glass Lid Cover With Handle, Dimensions: Same Sizes - 32cm (l) X 26cm (w) X 8cm (h)/2 Pcs Gas Range: Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h), 4-gas Burner, 62l Gas Oven, Button Ignition, Top Glass Lid, Net Weight: Maximum Of 28kg, Pan Support: Light Cast Iron Pan Support/2 Pcs Baking Sheet: Aluminum, 12x16 Inches/2 Pcs Digital Kitchen Scale: Accurate Measurement; Weigh Up To 5 Kg / 11 Lb Precisely In 1 G / 0.05 Oz Increments, Quality Material: Measure Food, Small Items, And Liquids With Confidence On The 304 Food-grade, Stainless Steel Platform, Approx. Dimension 7.3-7.5" (l) X 5.7-5.90" (w) X 0.6-08" (h), 2 X 1.5v Aaa Batteries/2 Pcs Measuring Cup (for Liquid Ingredients): 1 Measuring Cup With Red Graphics, Made Of Non-porous Glass That Won't Warp, Stain, Or Absorb Odors, Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe, Dimension: Approx. 7.13" (l) X 6.75" (w) X 4.38" (h), Measuring Capacity: 500ml/2 Pcs Measuring Cups (for Dry Ingredients): Material: Stainless Steel, 5 Pieces Per Set (1 Cup, 1/2 Cup, 1/3 Cup, 1/4 Cup, 1/8 Cup)/2 Pcs Measuring Spoons (set): 7pcs Stainless Measuring Spoon Kit, The Kit Includes: 1/8 Tsp (0.63ml), 1/4 Tsp (1.25ml), 1/2 Tsp (2.5ml), 3/4 Tsp (3.75ml), 1 Tsp (5ml), 1/2 Tbsp (7.5ml), 1 Tbsp (15ml)/2 Pcs Mixing Bowl: Medium, Approx. Diameter: 28cm, Height:11.2cm, Material: Stainless; Capacity: At Least 4l/2 Pcs Standmixer: 2-in-1 360 Automatic Rotating Bowl Electric Stand & Hand Mixer, 4.5l W/ 5-speed Turbo Function,color: Black/1 Pc Double Burner Gas Stove: Stainless Top And Front, Automatic Ignition ,reversible Trivet, Double Detachable Top Burner, Removable Drip Pan, Dimension: 730mm(l) X 395mm(w) X 105mm(h)/1 Pc Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/1 Pc Caldero: Aluminum, #2, Diameter Height 28cmx16cm With Double Handle/2 Pcs Kawali: Aluminum, (diameter X Height) 28cmx8cm With Double Handle/1 Pc Kawa: 19.5" Cast Iron With Double Handle Depth/height: 21cm (medium)/1 Pc Food Warmer/chafing Dish: Rectangular, 2l Capacity, 6 Pcs In 1 Set Stainless Steel, No Side Handle, Glass Lid Cover With Handle, Dimensions: Same Sizes - 32cm (l) X 26cm (w) X 8cm (h)1 Pc Food Glass Display (estante): 3 Layers; 20(h)x18(w)x36(l)", Aluminum Base, Glass With Screen Door/1 Pc Casserole With Double Handle: Material: Aluminum, Size: 26cm Dimension: 36(l) X 28.5(w) X 21(h)cm/2 Pcs Frying Tongs: Materials: Stainless Steel With Rubber Or Plastic Coated Handles, 12 Inch Long/1 Pc Chopping Board: Material: Polypropylene/1 Pc Chopping Knife: 10” Stainless,wood Handle/1 Pc Butcher's Knife: Materials: Stainless, Wood Handle, Size: About 10"/1 Pc Plastic Table: 4 Seaters, Square Type With Umbrella Hole At The Center, Table Dimension: 36" (length) X 36" (width) X 30" (height), Thickness: Approximately 1.5in To 2in; Color: Beige2 Pcs Monoblock Chairs: With Backrest, Seat 375mmxdepth 330mm, 2.25 Kg, Class B Plastic, Thickness: Approximately 1.5in, Color: Beige/1 Pc Beach Umbrella: 90" Diameter X 8 Ft. Height, 8 Rib Round Metal Pole, Polyester Multi-coloured Umbrella Canopy/2 Pcs Cooler Container: Chest Insulated Cooler, Materials: Polystyrene, Sizes And Capacities: 30 Liters - 45.5cm(l) X 39cm(w) X 31cm(h),color: Blue Or Red/1 Pc Grill/ Ihawan With Stand,material Of Body And Stand: Stainless , 24x12x33inches (lxwxh), Depth: 5inches/2 Pcs Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Umbrella Holder And 2 Chest Coolers Carrier (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo/2 Pcs Weighing Scale: 10kg Capacity, Colored Body / Stainless Pan, Graduation: 50g, Powder Coated Body, Pan Size: 255mm Ø X 55mm Deep, Dial Face: 185mm Ø, 4 Units/master Carton/4 Pcs Plastic Fruit Crate 21 X 15 X 12 Inches/1 Pc Hair Dryer, With 3 Temperature Setting (from High To Low): Size: Atleast 200mm (h), 74mm (w), Weight: Minimum Of 315g, Wattage: 2200w, Voltage: 120-240v, Body Material: Plastic/1 Pc 2 In 1 Steam Pro Hair Straightener (straightener & Curler): Tourmaline Ceramic Wide Plates - 1.25" Wide Heating Plate, Adjustable Temperature Display - 150-235◦c, 360◦, Swivel Cord - Tangle-free, Hanger Design, Ptc Heater - Instant Heat-up/1 Pc Hair Combs: Material: Plastic, Inclusions: Flat Comb Size - 21.5cm (l) X 4.2cm (w), Massage Comb Size: 22cm (l) X 8.5cm (w), Ribs Comb Size: 21.5cm (l) X 4cm (w), Curling Comb Size: 20.2cm (l) X 2.5cm (w), Mirror Size: Atleast 22cm (l) X 10cm (w); Storage Base Size: Atleast 10cm (l) X 15cm (w), Package Size: Approx. 22-23cm (l) X 16cm (w) X 11cm (h), Package Weight: Approx. 305g/1 Pc Hair Clips: Plastic, Product Size: Approx. 4.5", Color: Black (12pcs)/1 Pc 7pcs Face Brush Set, Inclusion: Powder Brush, Size: 17cm, Bristle Length: 3.2cm, Ferrule Width:1.9cm, Powder Buffer Brush, Size: 19cm, Bristle Length: 5cm, Ferrule Width: 2.1cm,foundation Brush, Size: 17cm, Bristle Length: 3.3cm, Ferrule Width: 2.2cm, Flat Foundation Brush, Size: 17cm,bristle Length: 3.2cm; Ferrule Width:1.2cm, Highlight Brush, Size: 16.5cm,bristle Length: 2.7cm, Ferrule Width: 2.3cm,angle Cheek Brush, Size: 17cm, Bristle Length: 3.1-2.3cm,ferrule Width: 2.4cm, Highlighting Fan Brush, Size: 16.5cm, Bristle Length: 4cm, Ferrule Width: 2.5cm, With Brush Bag/1 Pc Eyelash Curler: Material: Carbon Steel, Size: Approx. 5.91 X 3.94 X 1.97"/1 Pc Eyebrow Razor: Handle Material: Plastic, Size: Approx. 6.8(l) X 2(w) X 0.1"(h), 6pcs/pack/1 Pc Makeup Sponge Set Blender: Material: Sponge, Size: Approx. 4.02 (l) X 3.94(w) X 2.52"(h), 4pcs/set/1 Pc False Eyelashes, Product Dimensions: ‎ Approx. 0.75(l) X 3.88(w) X 5.38"(h), 5pairs/pack/1 Pc Eye Shadow Pallete: 12 Curated Peach-inspired Shades, Finish Type: Metallic, Matte, Product Dimension: Approx. 0.08 (l) X 0.04 (w) X 0.06" (h)/1 Pc Contour Palette: Multi-colored, Finish Type: Matte, Package Dimension: Approx. 5.75 (l) X 4.25 (w) X 0.5" (h)/1 Pc Hypercurl Waterproof Mascara Make Up Set: Product Dimensions: Approx. ‎0.85 (l) X 2.75 (w) X 5.63" (h), Color: Black/1 Pc Waterproof Matte Gel Eyeliner Pencil: Item Form: Pencil, Powder, Creamy, Finish Type: Matte, Product Dimensions: About‎ 5.77 X 1.97 X 0.81", Color: Black/1 Pc Eyebrow Gel, Waterproof: Weight: About 0.16 Oz, Product Dimension: Approx. 0.75 (l) X 1.9 (w) X 5.65 (h) Inches, Color Black, Brown/1 Pc Blush On, 3 Complimentary Skin-flushed Shades, Product Dimensions: Approx. 2.89 (l) X 0.43 (w) X 2.33" (h)/1 Pc Powder Blush Makeup Palette, Product Dimensions: ‎approx. 2.43 (l) X 2.43 (w) X 0.66" (h)/1 Pc Eye Shadow Palette; 12 Curated Peach-inspired Shades, Finished Type:metallic,matte, Product Dimensions:approx 0.08(l)x0.04(w) X0.06”(h)/ 1 Pc Applicator Brush And Plastic Comb: 13cm Black, Double-sided Comb, Pointed Handle For Sectioning Hair/1 Pc Hair Clipper: Electric; 110v-240v, 50-60hz,all Metal Machine, Led Light Display Stainless Steel Blade, Blade Width 45mm,low Noise High Power, 2000 Ma Lithium Battery, 210 Minutes Working Time, 4pcs Comb Guide 3/6/10/13mm, Body Size: 17x4cm, Body Weight: 371g, With Complete Accessories - Fiber Comb: Cleaning Brush, Lubricant, Charger/1 Pc Spray Bottle: 250ml Plastic Hairdressing Spray Bottle/1 Pc Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm, Length: 20.9"/52cm, Width: 14"/36cm, 4 Drawers, Blower Holder/1 Pc Curling Iron: 220v Power, 4gen; White, 32x25x13mm, Energy Efficient-48w,360degree Rotating Tail, Automatic Hair Curler, Iron Ceramic, Adjustable Size/1 Pc Apron: Length: 76cm, Width: 59cm, Color: Black, Material: Nylon, Waterproof/1 Pc Curling Rod: Small, 2cm, Cylindrical, Plastic Resin With Rubber Band Kits,multi-color/1 Pc Curling Rod: Medium, 2.5cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/1 Pc Curling Rod: Large, 3cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/1 Pc Spray Net: 600ml, 27.5cm, Hard Hold/1 Pc Hair Spray Aerosol Extra Hold: Weight: About 7ounces /198g, Scented, Package Dimensions: ‎7.83 X 6.69 X 2.17"/1 Pc Hair Trimmer: Running Time 120 Minutes Battery Powered,rechargeable Li-ion Battery 1500 Mah, Dimension: Approximately 6-7" (l) X 1.5-2.5 (w), Material: Stainless; Accessories: 4 Plastic Combs In Different Sizes 3mm, 6mm, 9mm, 12mm, Inclusions: 1 Recharging Transformer (charger), And 1 English User Manual, Input: Can Be Used For 110-240 Voltage/3 Pcs Hair Dryer, With 3 Temperature Setting (from High To Low): Size: Atleast 200mm (h), 74mm (w), Weight: Minimum Of 315g, Wattage: 2200w, Voltage: 120-240v,body Material: Plastic/3 Pcs 2 In 1 Steam Pro Hair Straightener (straightener & Curler): Tourmaline Ceramic Wide Plates - 1.25" Wide Heating Plate, Adjustable Temperature Display - 150-235◦c, 360◦, Swivel Cord - Tangle-free; Hanger Design, Ptc Heater - Instant Heat-up/3 Pcs Hair Combs: Material: Plastic, Inclusions: Flat Comb Size - 21.5cm (l) X 4.2cm (w), Massage Comb Size: 22cm (l) X 8.5cm (w), Ribs Comb Size: 21.5cm (l) X 4cm (w),curling Comb Size: 20.2cm (l) X 2.5cm (w), Mirror Size: Atleast 22cm (l) X 10cm (w), Storage Base Size: Atleast 10cm (l) X 15cm (w),package Size: Approx. 22-23cm (l) X 16cm (w) X 11cm (h), Package Weight: Approx. 305g/3 Pcs Hair Clips: Plastic, Product Size: Approx. 4.5",color: Black (12pcs)/3 Pcs Disposable Latex Free Gloves: Non-sterile, 100 Pcs Per Pack, Product Dimensions: Approx.‎ 8.6" (l) X 4.9" (w) X 3" (h), Weight: 1.25 Pounds, Material: Synthetic Pvc/3 Pcs Cutting Scissors: 6" Stainless Steel, 65g/3 Pcs Thinning Scissors: 17.5x5cm Stainless Steel/3 Pcs Drip Pan: 32cmx35cm Plastic, Black/3 Pcs Hair Clipper: Electric,110v-240v, 50-60hz,all Metal Machine,led Light Display Stainless Steel Blade, Blade Width 45mm, Low Noise High Power, 2000 Ma Lithium Battery, 210 Minutes Working Time, 4pcs Comb Guide 3/6/10/13mm, Body Size: 17x4cm, Body Weight: 371g,with Complete Accessories - Fiber Comb, Cleaning Brush, Lubricant, Charger/3 Pcs Nail Tool Set: Material: Stainless Steel, Case: Leather, Package Size: Approximately 15-15.5cm (l) X 8cm (w) X 2cm (h),inclusions: Cuticle Trimmer (95mm), Blackhead Needle And Loop Remover (83mm), Eyebrow Tweezer (86mm) Peeling Knife (90mm), Nail File (75mm), Ear Pick (78mm), Double Pick (75mm), Dead Skin Fork (86mm), Small Pedicure Plier (95mm), Acne Needle (83mm), Small Nail Clipper (62mm) Bevel Nail Clipper (61mm), Large Nail Clipper (82mm), Beauty Tip Scissor (89mm), Pusher/3 Pcs Cotton Balls: 300g (100 Pcs Large Cotton Balls)/3 Pcs Nail Polish: Volume: 15ml, With 24 Colors Inclusions: 14k Gold, 18k Gold, 24k Gold, African Plum, Baby Pink, Black Velvet, Carolina Peach, Cashmere, Emerald Shimmer, Golden Bronze, Italian Nude, Platinum Special, Pussy Red, Red Pearl, Saphire Glow, Silver Platinum, Simply Red, Tahiti Brown, White Satin, White Rose, Platinum Silver, Touch Of Tan, Touch Of Beige, Colorless/3 Pcs Foot Spa Soaker: With Pumice Stone, Package Dimensions: Approximately 16.42" X 13.58" X 7.91", Weight: About 4.63 Pounds, Rated Power: 500 Watts, Rated Voltage: 110~120v, Rated Frequency: 50hz, Temperature Adjustable Range: 35℃ To 48℃/3 Pcs Astringent Foot Soaker: 128oz/3 Pcs Cooling Foot Soak: Product Dimensions: ‎approximately 6.5-7" X 2.38-2.50" X 9.259.50", Weight: Atleast 900g/3 Pcs Exfoliating Foot Scrub: Package Dimensions: Approximately‎ 7.05-7.50" X 2.32-3" X 1.97-2", Weight: Atleast 6oz/3 Pcs Foot File And Callus Remover: Material: Metal, Steel, Item Dimensions: Approx. 10-10.78" X 2.7" X 0.29", Item Weight: 3.2 Pounds/3 Pcs Foot Scrub/3 Pcs Manicurist Bag: Made Of Heavy Duty Nylon, Large Capacity: Enough Room To Hold Up To 42 Bottles Of 15ml Nail Polish, Size: Approx. 8-9" (l) X 6-7" (w) X 4-5" (h)/3 Pcs Spray Bottle: 250ml Plastic Hairdressing Spray Bottle/3 Pcs Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm, Length: 20.9"/52cm, Width: 14"/36cm, 4 Drawers, Blower Holder/3 Pcs Apron: Length: 76cm, Width: 59cm,color: Black,material: Nylon, Waterproof/3 Pcs Alcohol: 70% Ethyl Alcohol With Moisturizer,500ml/3 Pcs Shampoo: 1000ml, Green Apple And Citrus Lemon Variant/3 Pcs Hair Spa: 1000ml, Lavender And Strawberry Variant/3 Pcs Hot Oil: Keratin Organic Hot Oil, 1000ml, Aloe Vera Variant/3 Pcs Hair Cellophane: 500ml, Natural, Brown,burgundy And Ash Blonde Variant/3 Pcs Hair Rebonding Set: 1000ml Hair Straightening And Hair Neutralizing (ion Perm)/3 Pcs Hair Color Dye:100 Ml, 2pcs Each (black, Dark Brown, Medium Brown, Light Brown, Blonde, Light Blond, Lighter Blonde, Lightest Blonde, Dust)/3 Pcs Hair Color Developer: 100ml 2pcs Each 6%, 9%, 12% Oxidizer/3 Pcs Hair Bleaching Powder: 500g/3 Pcs Brazilian Blowout: 120ml, 3-in-1 Set (clarifying Shampoo, Brazilian Blowout, After Treatment Conditioner)/24 Pcs Hair Dryer, With 3 Temperature Setting (from High To Low): Size: Atleast 200mm (h), 74mm (w), Weight: Minimum Of 315g, Wattage: 2200w, Voltage: 120-240v, Body Material: Plastic/24 Pcs 2 In 1 Steam Pro Hair Straightener (straightener & Curler): Tourmaline Ceramic Wide Plates - 1.25" Wide Heating Plate, Adjustable Temperature Display - 150-235◦c, 360◦,swivel Cord - Tangle-free, Hanger Design, Ptc Heater - Instant Heat-up/24 Pcs Hair Combs: Material: Plastic, Inclusions: Flat Comb Size - 21.5cm (l) X 4.2cm (w), Massage Comb Size: 22cm (l) X 8.5cm (w), Ribs Comb Size: 21.5cm (l) X 4cm (w), Curling Comb Size: 20.2cm (l) X 2.5cm (w), Mirror Size: Atleast 22cm (l) X 10cm (w), Storage Base Size: Atleast 10cm (l) X 15cm (w), Package Size: Approx. 22-23cm (l) X 16cm (w) X 11cm (h), Package Weight: Approx. 305g/24 Pcs Hair Clips: Plastic, Product Size: Approx. 4.5", Color: Black (12pcs)/24 Pcs Disposable Latex Free Gloves: Non-sterile, 100 Pcs Per Pack, Product Dimensions: Approx.‎ 8.6" (l) X 4.9" (w) X 3" (h), Weight: 1.25 Pounds, Material: Synthetic Pvc/24 Pcs Drip Pan: 32cmx35cm Plastic, Black/24 Pcs Shower Caps: 32cm, Thick Plastic, Elastic, Washable/24 Pcs Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm, Length: 20.9"/52cm, Width: 14"/36cm, 4 Drawers, Blower Holder/24 Pcs Curling Iron: 220v Power, 4gen, White, 32x25x13mm, Energy Efficient-48w, 360degree Rotating Tail, Automatic Hair Curler, Iron Ceramic, Adjustable Size/24 Pcs Hair Steamer: With 4 Wheels, 360degrees Movable, Gray Color, Adjustable Height With Timer And Control/120 Pcs Cape: 140x110cm, Satin, Nylon, Waterproof, Black/72 Pcs Microfiber Towel: 25x65cm, 135g, Microfiber, Dark Colors/24 Pcs Curling Rod:small, 2cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/24 Pcs Curling Rod: Medium, 2.5cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/24 Pcs Curling Rod: Large, 3cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/120 Pcs Ear Caps: (l X W X T): 8cm X 4.5cm X 2.1cm/3.15" X 1.77" X 0.83", Black,plastic/24 Pcs Shampoo: 1000ml, Green Apple And Citrus Lemon Variant/24 Pcs Hair Spa: 1000ml, Lavender And Strawberry Variant/24 Pcs Hot Oil: Keratin Organic Hot Oil, 1000ml, Aloe Vera Variant/24 Pcs Hair Cellophane: 500ml, Natural, Brown, Burgundy And Ash Blonde Variant/24 Pcs Hair Rebonding Set: 1000ml Hair Straightening And Hair Neutralizing (ion Perm)/24 Pc Hair Color Dye:100 Ml, 2pcs Each (black, Dark Brown, Medium Brown, Light Brown, Blonde, Light Blond, Lighter Blonde, Lightest Blonde, Dust)/24 Pcs Hair Color Developer: 100ml 2pcs Each 6%, 9%, 12% Oxidizer/24 Pcs Hair Bleaching Powder: 500g/24 Pcs Brazilian Blowout: 120ml, 3-in-1 Set (clarifying Shampoo, Brazilian Blowout, After Treatment Conditioner)/24 Pcs Hair Shear: Material: Stainless Steel, 1 Precision Scissor Approximately 6-7",1 Thinning Scissor Atleast 6", Accesories: Scissors Oil Atleast 5ml/34 Pcs Angle Grinder Cutting Disk: 10 Pcs. Per Set, Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8")/34 Pcs Crow Bar: At Least 36" Long,length Tolerance: +- 1/8, Material: Forged Steel Carbon/34 Pcs Claw Hammer: Round Head, Head Weight: At Least 16oz, Overall Weight: Approximately 17oz-23oz, Head Material: Forged Steel, Handle Material: Fiberglass Handle With Rubber Cushion, Overall Length: Approximately 12-14"/34 Pcs Hacksaw With Blade: Material: Aluminum Alloy Frame With Soft-grip Handle, At Least 12"-15" Long Including Handle, With Soft-grip Rubber Handle, Bi-metal, Blade Length: About 30cm, Width: 3cm/34 Pcs Meter Tape With Magnetic Hook: Blade Material: Nylon Coated Blade, Dimensions: 16ft (l) X 25mm (w)/34 Pcs Handsaw: Blade Length: About 15",blade Material: Carbon Steel, Handle Length: 5", Handle Material: Plastic/rubber, Color: Gray,8 Teeth Per Inch/34 Pcs Shovel: Round End, Tempered Steel Blade: 17-23 Cm, Blade Tip Width, 22-28cm Blade Tip Length, All Metal Handle, Overall Length: 100cm-115 Cm, Capacity: 350-400 Lbs/34 Pcs Shovel: Rectangular End, Tempered Steel Blade: 22-26 Cm, Blade Tip Width, 22-28cm Blade Tip Length, All Metal Handle, Overall Length: 100cm-115 Cm/34 Pcs Level Bar: Aluminum Frame, Length: At Least 24"/60cm, Aluminum Thickness: 1.5mm, Double Side Milles, 0.5mm/m Accurate Vials/34 Pcs Steel Float/plastering Trowel: Thickness: At Least 0.7 Mm, Surface Measurement, Length: 12", Width: 4", Mmaterial: High Carbon Steel With Wood Handle/34 Pcs Steel Square: Carpenter's Framing Square, Blade Width: 2" Scale: At Least 16" (l) X 24" (w), Material: Steel/34 Pcs Masonry Trowel: Length: At Least 12"long, Width: 6", Material: Flat Steel, With Wood Handle/34 Pcs Circular Saw: Voltage: 220-240v, Frequency: 50-60hz, Input Power: 1400w, No-load Speed: Atleast 4800rpm, Blade Diameter: 185mm, Cutting Capacity: 45degree: 44mm, 90 Degree: 65mm, Maximum Cutting Depth: Atleast 90°62mm, Weight: Maximum Of 5.2kg, Item Approximate Dimension: 15-17cm (h), 25-28cm (w), 30-35cm (l)/34 Pcs Masonry Square/metric Square: Material: Aluminum, Length: Approx. 24", Width: 16", 1/8 '' Thickness/34 Pcs Mason's Level: At Least 48'' Long, Aluminum Reinforced Frame, 60cm Only/34 Pcs Sledgehammer: Weight: At Least 3 Lbs With Fiberglass Handle, Forged Steel Round Head, Length: Approximately 25-27"/34 Pcs Concrete Chisel: Pointed Sharp End, Material: Forged Steel Chisel, With Rubberized Handle, Length: Approximately 10''/34 Pcs Putty Knife/paint Scraper Set (4pcs): Stainless Steel Blade With Rubberized Handle, Blade Width: 1", 2" And 3", Length Including Handle: Approximately 8-9"/34 Pcs Mason's Line: #18 Braided Nylon, 500 Ft/roll, Color Orange/34 Pcs Hammer Drill: Electric, 1980w 220v, Rated Frequency: 50/60hz, Load Speed: 0-3800rpm (revolutions Per Minute), Chuck: 13mm With Ergonomic Anti-slip Handle/34 Pcs Angle Grinder: Rated Input Power: 730w, Wheel Diameter: 4",rated Voltage: 220v, Frequency: 60hz, No Load Speed: 12,000 Rpm, Weight: Approximately 1.6kg, Grinding Spindle Thread: M10, Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h )/34 Pcs Wooden Float: Size: At Least 12x4", Has 5/8" Thick Rubber Pad, With Wooden Handle/4 Pcs Nail Tool Set: Material: Stainless Steel, Case: Leather, Package Size: Approximately 15-15.5cm (l) X 8cm (w) X 2cm (h), Inclusions: Cuticle Trimmer (95mm), Blackhead Needle And Loop Remover (83mm), Eyebrow Tweezer (86mm) Peeling Knife (90mm), Nail File (75mm), Ear Pick (78mm), Double Pick (75mm), Dead Skin Fork (86mm), Small Pedicure Plier (95mm), Acne Needle (83mm), Small Nail Clipper (62mm) Bevel Nail Clipper (61mm), Large Nail Clipper (82mm), Beauty Tip Scissor (89mm), Pusher/4 Pcs Cotton Balls: 300g (100 Pcs Large Cotton Balls)/4 Pcs Nail Polish: Volume: 15ml, With 24 Colors Inclusions: 14k Gold, 18k Gold, 24k Gold, African Plum, Baby Pink, Black Velvet, Carolina Peach, Cashmere, Emerald Shimmer, Golden Bronze, Italian Nude, Platinum Special, Pussy Red, Red Pearl, Sapphire Glow, Silver Platinum, Simply Red, Tahiti Brown, White Satin, White Rose, Platinum Silver, Touch Of Tan, Touch Of Beige, Colorless/4 Pcs Foot Spa Soaker: With Pumice Stone, Package Dimensions: Approximately 16.42" X 13.58" X 7.91", Weight: About 4.63 Pounds, Rated Power: 500 Watts, Rated Voltage: 110~120v, Rated Frequency: 50hz, Temperature Adjustable Range: 35℃ To 48℃/2 Pcs Astringent Foot Soaker: 128oz/2 Pcs Cooling Foot Soak: Product Dimensions: ‎approximately 6.5-7" X 2.38-2.50" X 9.259.50", Weight: Atleast 900g/2 Pcs Exfoliating Foot Scrub: Package Dimensions: Approximately‎ 7.05-7.50" X 2.32-3" X 1.97-2", Weight: Atleast 6oz/4 Pcs Foot File And Callus Remover: Material: Metal, Steel, Item Dimensions: Approx. 10-10.78" X 2.7" X 0.29", Item Weight: 3.2 Pounds/2 Pcs Foot Scrub/2 Pcs Manicurist Bag: Made Of Heavy Duty Nylon, Large Capacity: Enough Room To Hold Up To 42 Bottles Of 15ml Nail Polish, Size: Approx. 8-9" (l) X 6-7" (w) X 4-5" (h)/6 Pcs Microfiber Towel: 25x65cm, 135g, Microfiber,dark Colors/2 Pcs Alcohol: 70% Ethyl Alcohol With Moisturizer, 500ml/1 Pc Double Burner Gas Stove: Stainless Top And Front, Automatic Ignition ,reversible Trivet, Double Detachable Top Burner, Removable Drip Pan, Dimension: 730mm(l) X 395mm(w) X 105mm(h)/1 Pc Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/2 Pcs Kawa: 19.5" Cast Iron With Double Handle Depth/height: 21cm (medium)/1 Pc Plastic Table: 4 Seaters, Square Type With Umbrella Hole At The Center, Table Dimension: 36" (length) X 36" (width) X 30" (height), Thickness: Approximately 1.5in To 2in, Color: Beige/1 Pc Monoblock Chairs: With Backrest, Seat 375mmxdepth 330mm, 2.25 Kg, Class B Plastic, Thickness: Approximately 1.5in, Color: Beige/1 Pc Peanut Grinding Machine: Electric, 220v, 300w, 50-60hz,material: High Quality Stainless Steel Body And Base, Color: Black, Dimension: Approx. Length: 43.5cm, Width: 23cm, Height: 13.5cm/1 Pc Hand Cobbler Shoe Repair Machine Dual Cotton Nylon Line Sewing Machine Manual Leather Machine Shoe Sewing Machine Color Silver: Product Dimensions 14.4"d X 20.5"w X 5.5"h, Material: Cast Iron Item Weight: 22 Pounds, Power Source: Crank/5 Pcs Wooden Handle Shoes Repairing Awl Shoe Sewing Tool Diy Craft Repair Hand Straight Hook Shoes Sewing Awl Type: Shoes Sewing Awl Material: Wood+metal, Features: Shoes Sewing Awl, Repair Hand , Crochet Needle Tool Dimension: 1: App.2x13.5x6cm/0.79x5.31x2.36in 2: App.2x13x5.5cm/0.79x5.12x2.17in 3: App.2x13x5.5cm/0.79x5.12x2.17in, Color: Wood Color + Silver/5 Pcs Upholstery Stitching Thread Black 100 Mtr. 1 Pc Upholstery Hand Stitching Tools For Belts, Saddles, Shoes, Fabric Household Use Handwork Sewing Leather Craft Shoes Repairing/5 Pcs Upholstery Stitching Thread Brown 100 Mtr 1 Pc Upholstery Hand Stitching Tools For Belts, Saddles, Shoes, Fabric Household Use Handwork Sewing Leather Craft Shoes Repairing/5 Pcs Upholstery Stitching Thread White 100 Mtr. 1 Pc Upholstery Hand Stitching Tools For Belts, Saddles, Shoes, Fabric Household Use Handwork Sewing Leather Craft Shoes Repairing/2 Pcs Angle Grinder Cutting Disk: 10 Pcs. Per Set, Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8")/2 Pcs Angle Grinder: Rated Input Power: 730w, Wheel Diameter: 4", Rated Voltage: 220v,frequency: 60hz, No Load Speed: 12,000 Rpm, Weight: Approximately 1.6kg, Grinding Spindle Thread: M10, Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h)/2 Pcs Chipping Hammer: Item Weight: ‎at Least 13.8 Ounces, Product Dimensions: ‎11" (l) X 1" (w) X 7.5" (h), Material: Genuine Leather Grip And Forged Steel/2 Pcs Heavy Duty Corded Drill: Rated Input Power: 750w, Chuck Capacity: Up To 13mm, Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm), Dimension: 268mm (l) X 69mm (w) X 192mm (h), Weight W/out Cable: Approximately 1.6-1.8 Kg, Spindle Collar Diameter Of 43 Mm/2 Pcs Metal Drill Bit Set: Material: High Speed Steel, 19pcs Per Set(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm,7.5mm,8mm,8.5mm,9mm,9.5mm,10mm), Point Angle: 118degree C, Standards: Din 338, Bit Geometry: Standard Twist Bit/2 Pcs Mig Welding Pliers: Overall Length: Atleast 210mm, Material: High Carbon Steel, Handle Material: Thermoplastic Rubber/2 Pcs Needle File Set: (6 Pieces Hand Metal Files, Hardened Alloy, Strength Steel Set Includes Flat, Flat Warding, Square, Triangular, Round, And Half-round File), Color Black, Metal Type: Carbon Steel, Handle Material: Wood, Alloy Steel, Item Dimensions: Approximately 6.1" (l) X 3" (w) X 0.5" (h)/2 Pcs Portable Welding Machine: Input Voltage: 220-240, Frequency: 50-60hz, Output Current: 10-220a, Led Display, No-load Voltage: 85v, Max. Output Current: 220a, Diameter Of Electrode: 1.6-3.2mm, Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable/2 Pcs Speed Square: Material: Cast Aluminum, Size: About 18x18x2cm/7.09x7.09x0.79", Weight: About 130g,triangle-shaped/2 Pcs Welding Helmet: Auto Darkening Helmet: Power Supply: Battery And Solar Powered, Light Shade: Din9-1, Dark Shade: Din4, Switching Time: 1/25000s, Delay Time: 0.1-0.8s, Sensitivity Adjustment: Stepless Control, Operation Temperature: -5 Degrees- 55 Degrees, Active Viewing Area: 93mmx43mm, Active Viewing Area Size: (+/- 10mm), Item Weight: At Least 1.85 Pounds, Package Dimensions: ‎approximately 12-12.4" (l) X 9-9.61" (w) X 7-7.68" (h)/2 Pcs Welding Magnets: 6 Pcs/set, Overall Length: At Least (3"), Hold Capacity: Up To 25lbs, Arrow Design Supports Angle: 45°, 90°, And 135°, Item Weight: 295g, Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches, ‎material: Steel, Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm)/2 Pcs Welding Suit: 100% Cotton With Pyrovatex, 2 Back Pockets And Rule Pocket With Safety Gusset Feature, High Quality And Long Lasting, Two Way Zipper, Approximate Cloth Size: Large/10 Pcs Camping Dome Tent: Product Dimensions: 82.7"l X 55"w X 43.5"h, Item Weight: 4 Pounds Shape: D Shape Occupancy: 2 Person Included Components: Carry Bag, Stakes, Rainfly Water Resistance Technology 1000 Millimeters, Special Feature: Windproof, Sun Protection/outdoor Mat (banig):size (48" X 75") Material: Palm Leaves (buri)/10 Pcs Double Burner Gas Stove: Stainless Top And Front, Automatic Ignition ,reversible Trivet, Double Detachable Top Burner, Removable Drip Pan, Dimension: 730mm(l) X 395mm(w) X 105mm(h)/2 Unit Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/1 Unit Gas Range: Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h), 4-gas Burner, 62l Gas Oven, Button Ignition, Top Glass Lid, Net Weight: Maximum Of 28kg, Pan Support: Light Cast Iron Pan Support/5 Pcs Kawali: Aluminum, (diameter X Height) 28cmx8cm With Double Handle/2 Pc S Kawa: 19.5" Cast Iron With Double Handle Depth/height: 21cm (medium)/5 Pcs Wok Ladle: Material: Stainless Steel With Wooden Handle: Total Length Of Item: 24 Inches/5 Pcs Wok Spatula: Material: Stainless Steel With Wooden Handle, Total Length Of Item:24 Inches/5 Pcs Stainless Steel Long Wooden Handle Skimmer Strainer: Material: Stainless Steel, Size: 32.3*11.5cm/5 Pcs Casserole With Double Handle: Material: Aluminum, Size: 26cm, Dimension: 36(l) X 28.5(w) X 21(h)cm/5 Pcs Frying Tongs: Materials: Stainless Steel With Rubber Or Plastic Coated Handles, 12 Inch Long/5 Pcs Chopping Board: Material: Polypropylene Plastic: 8"(w) X 10"(l), 1cm (thickness)/5 Pcs Chopping Knife: 10" Stainless; Wood Handle/5 Pcs Grill/ Ihawan With Stand, Material Of Body And Stand: Stainless, 24x12x33inches (lxwxh), Depth: 5inches/1 Unit Heavy Duty Commercial Micromatic Big 7.8l Mrc-50 Rice Cooker 45cups (white)/10 Dz Melamine Round Dinner Plate: 9" Diameter, Color; White/10dz Platito (saucer): Material: Melamine Plastic, Standard Size: 6 Inch (diameter) X ¾ Inch Height/10 Pcs Serving Tray Bamboo - Wooden Tray With Handles, Color Brown Material Wood, Product Dimensions 17"l X 11"w X 2"h/10dz Drinking Glass: 8 Oz, Glass, Product Size: Base Diameter-7cm, Top Diameter: 7cm, H-11.4cm, Heat Resistant, Dishwasher Safe/10dz Spoon: Stainless, 12pcs/per Pack, Size: 8"/10dz Fork: Stainless, 12 Pcs/per Pack, Size 8"/5dz Mangkok (round Shape Bowl), Materials: Ceramic, Size: 6inch (diameter) X 5cm (height)/5 Pcs Storage Box With Wheels For Easy Transport, Measurements: L72 X W52 X H44cm, Food Grade Material, 120l Capacity, Stackable; With Lid And Handle, Color: White/2 Pcs Butcher's Knife: Materials: Stainless, Wood Handle, Size: About 10"/5 Pcs Gallon Acrylic Juice Dispenser Type: Type: Water/juice Dispensers, Overall Dimensions: Height:32 1/2 Inches, Top Diameter: 6 11/16 Inches, Capacity:1.1 Gallons, Base Material: Stainless Steel, Container Material: Acrylic, Style: Single/5 Pcs Chafing Dish Food Warmer Buffet Set: Size: 1/1pan*3, Color: Silver, Material: Stainless Steel, Product Dimensions: 13.39"l X 15.35"w X 23.62"h, Capacity: 8 Quarts/5 Pcs Chest Cooler: Item Package Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h), Package Weight: ‎5.76kg, Inside Dimensions: 24.95" (l) X 14.58" (w) X 14.77" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l , Color: Blue Or Red/5 Pcs Matress: Size: Semi Double (48" X 75"), Thickness: 4"/15 Pcs Matress Size: Queen (60" X 75") Thickness: 4"/15 Pcs Pillow: Size: Standard (20" X 26")/10 Sets Bed Linen Set Of 3pcs, 1-bed Sheet Size (48" X 75"), 2-pillow Case (20" X 26")/2 Sets Bed Linen Set Of 3pcs: 1-bed Sheet Size (60" X 75"), 2-pillow Case (20" X 26")/6 Unit Electric Fan: Color: Black, Electric Fan Design: Floor Fan, Power Source: Corded Electric Style: 3-speed Ac Motor Fan, Product Dimensions: 15.75"d X 17.72"w X 53.15"h, Room Type: Bedroom, Special Feature: Oscillating, Adjustable Height, Adjustable Tilt,wattage: 60 Watt/4 Unit Industrial Ceiling Fan: Product Material: Cast Aluminum Casing, Product Specifications: 2000mm, Operating Voltage: 220v, Wind Speed: 5th Gear, Number Of Fan Product Color: Black, White, Product Power: 165w, Blades: 6 Blades/150 Pcs Monoblock Chairs: With Backrest, Seat 375mmxdepth 330mm, 2.25 Kg, Class B Plastic, Thickness: Approximately 1.5in, Color: White/15 Pcs Solid Top Round Table: Material: Plastic, Color: White, Size(cm): 115 X 74 X 4.5, Foldable Legs,diameter: 45″, 6 To 8 Seater Capacity 20.2 Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It: Bir Registration 21.2 Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It: None General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract(scc). 2. Advance Payment 2.1 Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2 The Procuring Entity Is Allowed To Determine The Terms Of The Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr. 4. Inspection And Tests The Procuring Entity Or Its Representatives Shall Have The Right To Inspect And/or The Test The Goods To Confirm Their Conformity To The Project. In Addition To Tests In The Scc, Section Vii(technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identify Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 7.1. In Order To Assure The Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 7.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines] “the Delivery Terms Applicable To This Contract Are Delivered [indicate Place Of Destination]. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is Wilson G. Baliwas. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; D. Performance Or Supervision Or Maintenance And/or Repair Of The Supplied Goods, For A Period Of Time Agreed By The Parties, Provided That This Service Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And E. Training Of The Procuring Entity’s Personnel, At The Supplier’s Plant And/or On-site, In Assembly, Start-up, Operation, Maintenance, And/or Repair Of The Supplied Goods. F. No Additional Incidental Service Requirements. The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Spare Parts – The Supplier Is Required To Provide All Of The Following Materials, Notifications, And Information Pertaining To Spare Parts Manufactured Or Distributed By The Supplier: 1. Such Spare Parts As The Procuring Entity May Elect To Purchase From The Supplier, Provided That This Election Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And 2. In The Event Of Termination Of Production Of The Spare Parts: I. Advance Notification To The Procuring Entity Of The Pending Termination, In Sufficient Time To Permit The Procuring Entity To Procure Needed Requirements; And Ii. Following Such Termination, Furnishing At No Cost To The Procuring Entity, The Blueprints, Drawings, And Specifications Of The Spare Parts, If Requested. The Spare Parts And Other Components Required Are Listed In Section Vi (schedule Of Requirements) And The Costs Thereof Are Included In The Contract Price. The Supplier Shall Carry Sufficient Inventories To Assure Ex-stock Supply Of Consumable Spare Parts Or Components For The Goods For A Period Of Three(3) Months. Spare Parts Or Components Shall Be Supplied As Promptly As Possible, But In Any Case, Within Three(3) Months Of Placing The Order. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions Any Relevant Hazchem Classifications A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Intellectual Property Rights – The Supplier Shall Indemnify The Procuring Entity Against All Third-party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 2.2 Partial Payment Is Not Applicable. 4 The Inspections And Tests That Will Be Conducted Are: Inspection Of The Livelihood Supplies And Materials If It Follows The Technical Specification Set By The End-user Unit. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item No. Quantity Item Description Total Delivered, Weeks/months Remarks Indicate Here Any Other Appropriate Information As May Be Necessary. Signature Over Printed Name Position Department/division Technical Specifications Technical Specifications Item / Service Maximum Quantity Technical Specifications / Scope Of Work Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution.] Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; (b) Registration From Sec, Department Of Trade And Industry(dti) For Sole Proprietorship And Cda For Cooperatives (c) Valid Mayor’s Permit By The City Or Municipality Where The Principal Place Of Business Is Located (d) Tax Clearance Per Eo 398 Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (i) Original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (j) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (k) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (l) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (m) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (n) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (o) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.   Omnibus Sworn Statement(revised) Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. Select One, Delete The Other: If A Sole Proprietorship: I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. Select One, Delete The Other: If A Sole Proprietorship: As The Owner And Sole Proprietor Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] As Shown In The Attached Duly Notarized Special Power Of Attorney; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g. Duly Notarized Secretary’s Certificate, Board/partnership Resolution Or Special Power Of Attorney, Whichever Is Applicable]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For And In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. Select One, Delete The Rest: If A Sole Proprietorship: The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Partnership Or Cooperative: None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Corporation Or Joint Venture: None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Following Responsibilities As A Bidder: A) Carefully Examine All Of The Bidding Documents; B) Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C) Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D) Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay, Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Of Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling(estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 Series Of 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This ___________ Day Of __________________, 2024 At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory [insert Signatory’s Legal Capacity] Affiant Subscribed And Sworn To Before Me A Notary Public For And Within The Province/city Pf __________________, On This ________ Day Of _______________, 2024 At __________________________ By The Above Named Affiant With His/her __________________ As The Competent Evidence Of His/her Identity And Avows Under Penalty Of Law That All The Statements Contained On This Instrument Are True And Correct. Doc. No. ______________ Page No: ______________ Book No. ______________ Series Of 2024. Republic Of The Philipppines ) City Of Sorsogon ) S.s. X ---------------------------------------------------x Bid Securing Declaration Project Identification No. ______ To: [insert Name And Address Of Procuring Entity] I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid-securing Declaration. 2. I/we Accept That: (a) I Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of Two(2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen(15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1(f) Of The Irr Of Ra No. 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid-securing Declaration Shall Cease To Be Valid On The Following Circumstances: (a) Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; (b) I Am Declared Ineligible Or Post Disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; And (c) I Am/we Declared As The Bidder With The Lowest Calculated And Responsive Bid And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I Have Hereunto Set My Hand This _____ Day Of ________, 2024 At __________________. _____________________________________ Bidder’s Representative/authorized Signatory [insert Signatory’s Legal Capacity] Affiant Subscribed And Sworn To Before Me A Notary Public For And Within The Province/city Pf __________________, On This ________ Day Of _______________, 2024 At __________________________ By The Above Named Affiant With His/her __________________ As The Competent Evidence Of His/her Identity And Avows Under Penalty Of Law That All The Statements Contained On This Instrument Are True And Correct. Doc. No. __________ Page No. __________ Book No. __________ Series Of 2024. Bid Form For The Procurement Of Goods (shall Be Submitted With The Bid) Bid Form Date: _____________________________ Project Identification No.: _____________ To: [name And Address Of Procuring Entity] Having Examined The Philippine Bidding Documents(pbds) Including The Supplemental Or Bid Bulletin Numbers_____, The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To (supply/deliver/perform) (description Of The Goods) In Conformity With The Said Pbds For The Sum Of (total Bid Amount In Words And Figures) Or The Total Calculated Bid Price, As Evaluated And Corrected For Computational Errors , And Other Bid Modifications In Accordance With The Price Schedules Attached Herewith And Made Part Of This Bid. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To (specify The Applicable Taxes, E.g. (i) Value Added Tax, (ii) Income Tax, (iii) Local Taxes, And (iv) Other Fiscal Levies And Duties), Which Are Itemized Herein Or In The Price Schedules. If Our Bid Is Accepted, We Undertake: A.to Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements Of The Philippine Bidding Documents(pbds); B. To Provide A Performance Security In The Form, Amounts, And Within The Times Prescribed In The Pbds; C. To Abide By The Bid Validity Specified In The Pbds And It Shall Remain Binding Upon Us At Any Time Before The Expiration Of That Period. Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/conform That We Comply With The Eligibility Requirements Pursuant To The Pbds. The Undersigned Is Authorized To Submit The Bid On Behalf Of (name Of The Bidder) As Evidenced By The Attached (state The Written Authority). We Acknowledge That Failure To Sugn Each And Every Page Of This Bid Form, Including, The Attached Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Name: Legal Capacity: Signed: Duly Authorized To Sign The Bid For And On Behalf Of: Date: ___________ Contract Agreement For The Procurement Of Goods(revised) __________________________________________________________________________ This Agreement, Made The _________ Day Of _______________, ________ Between [name And Address Of Procuring Entity] Of The Philippines (hereinafter Called The“entity”) Of The One Part And [name Of Supplier] (hereinafter Called The “supplier”) Of The Other Part. Whereas, The Entity Invited Bids For Certain Goods And Ancillary Services, Particularly (brief Description Of Goods And Services) And Has Accepted A Bid By The Supplier For The Supply Of Those Goods And Services In The Sum Of (contract Price In Words And Figures In Specified Currency) (hereinafter Called The “contract Price”). Now This Agreement Witnesseth As Follows: 1. In This Agreement, Words And Expressions Shall Have The Same Meanings As Are Respectively Assigned To Them In The Conditions Of Contract Hereinafter Referred To. 2. The Following Documents As Required By The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 Shall Be Deemed To Form And Be Read And Construed As Part Of This Agreement, Viz.: I. Philippine Bidding Documents(pbds) I. Schedule Of Requirements; Ii.technical Specifications; Iii.bill Of Quantities Iv.general And Special Conditions Of Contract; V.supplemental Or Bid Bulletins, If Any Ii. Winning Bidder’s Bid, Including The Eligibility Requirements, Technical And Financial Proposals, And All Other Documents Or Statements Submitted; Bid Form, Including All The Documents/statements Submitted; Bid Form, Including All The Documents/statements Contained In The Bidder’s Bidding Envelopes, As Annexes, And All Other Documents Submitted(e.g., Bidder’s Response To Request For Clarifications On The Bid), Including Corrections To The Bid, If Any, Resulting From The Procuring Entity’s Bid Evaluation; C. Performance Security D. Notice Of Award Of Contract And The Bidder’s Conforme Thereto; And E. Other Contract Documents That May Be Required By Existing Laws And/or The Procuring Entity Concerned In The Pbds. Winning Bidder Agrees That Additional Contract Documents Or Information Prescribed By The Gppb That Are Subsequently Required For Submission After The Contract Execution, Such As The Notice To Proceed, Variation Orders And Warranty Security, Shall Likewise Form Part Of The Contract. 3. In Consideration For The Sum Of [total Contract Price In Words And Figures) Or Such Other Sums As May Be Ascertained, [name Of Bidder] Agrees To Execute The [state The Object Of The Contract] In Accordance With His/her/its Bid. 4. The [name Of The Procuring Entity] To Pay The Above-mentioned Sum In Accordance With The Terms Of Bidding. In Witness, Whereof The Parties Thereto Have Caused This Agreement To Be Executed The Day And Year First Before Written. Binding Signature Of The Procuring Entity: Binding Signature Of Supplier: Insert Name And Signature] [insert Name And Signature] [insert Signatory’s Legal Capacity] [insert Signatory’s Legal Capacity] Signed In The Presence Of: ______________________ ________________ Liaison Officer For: For: [insert Procuring Entity] [insert Name Of Supplier] Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. ______________ Page No: ______________ Book No. ______________ Series Of 2024.

Details: Description Request For Quotations: Please Quote Your Best Offer For The Item/s Described Below, Subject To The Terms And Conditions Provided At The Dorsal Portion Of This Request For Quotation. Submit Your Quotation Duly Signed By You Or Your Duly Representative And Copies Of Eligibility Requirements (business Permit, Local/national Tax Clearance And Philgeps Certificate Of Registration) Not Later Than The Deadline For Submission. Items: Procurement For The Repair & Maintenance Of Transportation Equipment: Motor Vehicle Under The Repair & Maintenance Fund Of The City General Services Office Lot 1-repair & Maintenance Of Transportation Equipment: Motor Vehicle Unit Qty "item Description " Unit Cost " Lot 1 Repair And Maintenance Of Transportation Equipment : Motor Vehicle 1,000,000.00 Ordering Agreement - Supply Of Vehicle Parts For Minor Repairs And Maintenance At The Navotas Motorpool For 4 - Wheel Vehicles Pc/s 50 Battery Lug 150.00 Mtr/s 50 Wire-#10,16,18 290.00 Pc/s 50 Switches- 2gang,3gang,6gang 950.00 Pc/s 50 Handle Switch 1,200.00 Pc/s 100 Oil Seal 950.00 Pc/s 100 Battery Terminal Ci Brass 260.00 Pc/s 50 Brake Master 4,700.00 Pc/s 100 Repair Kit 1,200.00 Set/s 100 Brake Pads 2,500.00 Set/s 100 Brake Shoe 3,500.00 Pc/s 100 Drum Brake 6,900.00 Pc/s 100 Brake Hose 950.00 Pc/s 100 Bleeder Valve 1,250.00 Pc/s 100 Return Spring 950.00 Pc/s 150 Lug Nuts 95.00 Pc/s 150 Bolt/nut 65.00 Pc/s 300 Clips 75.00 Pc/s 150 Wheel Cap 95.00 Pc/s 150 Wheel Boot 95.00 Pc/s 50 Rotor Disk Brake 1,900.00 Pc/s 100 Headlight Bulb 850.00 Pc/s 100 Bulb Socket 150.00 Pc/s 100 Brake Light 250.00 Pc/s 100 Signal Light Bulb 150.00 Pc/s 100 Clutch Cable 3,900.00 Pc/s 100 Gas Cable 2,500.00 Mtr/s 50 Copper Tube 250.00 Pc/s 100 Hand Brake Cable 2,500.00 Pc/s 50 Lever 650.00 Pc/s 150 Air Filter 1,200.00 Pc/s 50 Hose-radiator Inlet 3,600.00 Pc/s 50 Hose-radiator Outlet "b" 3,100.00 Pc/s 50 Hose-radiator Outlet "c" 3,800.00 Pc/s 50 Hose-radiator Outlet 1,900.00 Pc/s 50 Hose-fill Line 1,350.00 Pc/s 50 Hose-heater 1,315.00 Pc/s 100 Hose Clamp 95.00 Pc/s 50 Belt "v" 3,700.00 Pc/s 50 Ribbed Belt-v 3,400.00 Pc/s 100 Radiator Hose 1,700.00 Pc/s 100 Radiator Cap 1,200.00 Pc/s 100 Fan Belt 1,600.00 Pc/s 150 Spark Plug 650.00 Pc/s 150 Spark Plug Terminal 380.00 Ltr/s 150 Radiator Coolant 550.00 Pc/s 100 Wheel Hub 1,600.00 Pc/s 100 Wheel Bearing 1,450.00 Pc/s 50 Wheel Cylinder 1,650.00 Pc/s 150 Seal 350.00 Box/s 30 Automotive Fuse 5a,10a,15a,20a,25a,30a 350.00 Assy/s 50 Horn 2,400.00 Pc/s 100 Relay 950.00 Ltr/s 150 Gear Oil 375.00 Pc/s 150 Tire Valve 150.00 Pc/s 150 Tire Selant 325.00 Pc/s 100 Throttle Controller 2,450.00 Pc/s 100 Tube 750.00 Pc/s 100 Truck Tubes 1,200.00 Pc/s 100 Flap 550.00 Ltr/s 150 High Performance Gear Oil 700.00 Assy/s 50 Clutch Master 3,100.00 Assy/s 50 Secondary Master 2,500.00 Set/s 50 Fender Liner 2,500.00 Pc/s 50 Floor Guard Rubber 3,000.00 Pc/s 50 Steering Wheel Cover 2,200.00 Pc/s 50 Side Mirror 1,200.00 Pc/s 50 Side Mirror Glass Only 350.00 Pc/s 50 Oil Filter 850.00 Pc/s 50 Coil 1,500.00 Unit 20 Radiator Assy. 5,200.00 Bottle/s 50 Coolant 3l 750.00 Bottle/s 100 Engine Oil 800ml 650.00 Assy. 30 Starter Motor Assy 10,990.00 Assy. 30 Alternator Assy 11,500.00 Pc/s 20 Alternator Pulley 950.00 Assy. 30 Fan Motor Assy. 3,800.00 Bottle/s 100 Brake Fluid 3l 340.00 Assy. 20 Fuel Pump Assy. 1,750.00 Pc/s 20 Clutch Disc 4,700.00 Pc/s 20 Clutch Cover 4,450.00 Pc/s 20 Pressure Plate 4,650.00 Pc/s 20 Release Bearing 2,150.00 Pc/s 30 Timing Belt 3,500.00 Pc/s 30 Tensioner Bearing 2,250.00 Pc/s 30 Tensioner Adjuster 950.00 Pc/s 30 Camshaft Oil Seal 1,350.00 Pc/s 50 Fuel Filter 980.00 Pc/s 20 Hydrovac Brake Booster 9,500.00 Pc/s 20 Ignition Switch 3,800.00 Pc/s 20 Intake Manifold Gasket 1,200.00 Pc/s 20 Intake/exhaust Valve 850.00 Pc/s 20 Knucle Bearing 1,200.00 Set/s 20 Leaf Spring Set 4,350.00 Pc/s 20 Main Bearing 3,500.00 Pc/s 20 Connecting Rod 3,800.00 Pc/s 20 Thrust Washer 1,450.00 Pc/s 20 Regulator 2,500.00 Pc/s 50 Car Charger Cigar Port 490.00 Pc/s 20 Steering Bearing 2,500.00 Pc/s 50 Ignition Coil 1,950.00 Pc/s 50 U-bolt 350.00 Pc/s 20 Power Steering Fluid Reservoir 1,350.00 Pc/s 20 Rotor Disc 4,950.00 Pc/s 20 Ball Joint 1,950.00 Set/s 20 Stabilizer Link 2,450.00 Pc/s 20 Bearing 1,350.00 Assy. 20 Shock Absorber 4,500.00 Set/s 30 Coil Spring 3,500.00 Pc/s 50 Battery Lug 150.00 Mtr/s 50 Wire-#10,16,18 290.00 Pc/s 50 Switches- 2gang,3gang,6gang 650.00 Pc/s 100 Oil Seal 350.00 Pc/s 100 Oil Filter 180.00 Pc/s 100 Engine Oil 550.00 Pc/s 100 Battery Terminal Ci Brass 100.00 Pc/s 50 Brake Master 950.00 Pc/s 100 Repair Kit 1,200.00 Set/s 100 Brake Pads 850.00 Set/s 100 Brake Shoe 950.00 Pc/s 100 Drum Brake 950.00 Pc/s 100 Brake Hose 650.00 Pc/s 150 Lug Nuts 95.00 Pc/s 150 Bolt/nut 65.00 Pc/s 150 Wheel Cap 95.00 Pc/s 150 Wheel Boot 95.00 Pc/s 50 Rotor Disk Brake 1,750.00 Pc/s 100 Headlight Bulb 250.00 Pc/s 100 Bulb Socket 150.00 Pc/s 100 Clutch Cable 550.00 Pc/s 100 Gas Cable 750.00 Pc/s 100 Hand Brake Cable 890.00 Pc/s 50 Lever 650.00 Pc/s 150 Air Filter 550.00 Pc/s 100 Hose Clamp 95.00 Pc/s 50 Belt "v" 1,200.00 Pc/s 150 Flyball 140.00 Pc/s 150 Slider 140.00 Pc/s 100 Pulley 950.00 Pc/s 100 Radiator Hose 650.00 Pc/s 100 Radiator Cap 490.00 Pc/s 150 Spark Plug 650.00 Pc/s 150 Spark Plug Terminal 650.00 Pc/s 5 E-cab 1000 Battery Charger 10,500.00 Pc/s 10 Wiper Motor 2,200.00 Pc/s 10 Meter Assy. 1,500.00 Pc/s 10 E-cab Braker 350.00 Ltr/s 150 Radiator Coolant 550.00 Pc/s 100 Wheel Hub 1,600.00 Pc/s 100 Wheel Bearing 750.00 Pc/s 50 Wheel Cylinder 850.00 Pc/s 150 Automotive Fuse 65.00 Assy/s 50 Horn 950.00 Pc/s 100 Relay 320.00 Ltr/s 150 Gear Oil 375.00 Pc/s 20 Breaker 450.00 Pc/s 150 Tire Valve 150.00 Pc/s 150 Tire Selant 325.00 Pc/s 100 Throttle Controller 350.00 Pc/s 50 Fun350 395.00 Set/s 50 Sprocket & Chain Set 6,800.00 Pc/s 50 Ecargo 375.00 Pc/s 100 Tube 280.00 Ltr/s 150 High Performance Gear Oil 700.00 Assy/s 50 Clutch Master 2,500.00 Pc/s 30 Side Stand 650.00 Pc/s 30 Center Stand 1,500.00 Pc/s 50 Wiper Arm 1,500.00 Assy/s 30 Exhaust Pipe 2,500.00 Pc/s 50 Stand Spring 150.00 Pc/s 50 Side Mirror 450.00 Pc/s 50 Chain 3,000.00 Pc/s 50 Front Sprocket 1,450.00 Pc/s 50 Rear Sprocket 2,800.00 Pc/s 50 Fender 980.00 Assy/s 50 Shock Absorber 2,500.00 Set/s 50 Sprocket & Chain Set 6,800.00 -tires Pc/s 10 10.00r20 18,500.00 Pc/s 10 11r22.5 25,500.00 Pc/s 10 165/80r13 5,400.00 Pc/s 30 185/60r15 5,700.00 Pc/s 50 185/70r14 6,000.00 Pc/s 30 185/70r15 8,600.00 Pc/s 30 185/80r14 7,100.00 Pc/s 40 185r-14c 6,700.00 Pc/s 10 195/70r15c 7,250.00 Pc/s 20 195r14c 8ply 7,600.00 Pc/s 50 195r15 7,680.00 Pc/s 30 205/65r16 8,600.00 Pc/s 20 205/85r16 13,100.00 Pc/s 50 205/65r15 8,400.00 Pc/s 30 215/70r - 16c 9,570.00 Pc/s 20 235/75r17.5 15,100.00 Pc/s 10 235/70r15 9,900.00 Pc/s 10 295/70r17 39,500.00 Pc/s 30 750/16 14,600.00 Pc/s 30 700/16 11,100.00 Pc/s 20 7.00/15 13,500.00 Pc/s 30 R(3.25-17) 3,100.00 Pc/s 30 F(2.75 - 17) 3,000.00 Pc/s 30 70-90-14 4,100.00 Pc/s 30 F(80-90-14) 4,100.00 Pc/s 30 (2.75-18) 2,850.00 Pc/s 30 (2.75-17) 2,500.00 Pc/s 30 (3.75-17) 2,800.00 Pc/s 30 (3.75 - 12) 2,900.00 Pc/s 30 (3.50 - 12) 2,750.00 Pc/s 30 (4.10-18) 3,600.00 Pc/s 30 (2.75-21) 4,300.00 Pc/s 30 (80/80-14) 3,800.00 Pc/s 30 (90/80-14) 4,100.00 Pc/s 30 2.75 – 17 2,650.00 Pc/s 30 3.00 – 17 2,850.00 -batteries Pc/s 30 Mg7l 4,000.00 Pc/s 30 Yb7bl 2,200.00 Pc/s 30 Ytx4l 2,200.00 Pc/s 30 12n9-4b-1 2,200.00 Pc/s 30 2sm 8,600.00 Pc/s 50 3sm 9,900.00 Pc/s 30 6sm 11,800.00 Pc/s 30 B24l 8,300.00 Pc/s 30 Ln3 11,000.00 Pc/s 20 2d 14,500.00 Pc/s 20 4d 16,200.00 Pc/s 20 8d 21,800.00 Pc/s 30 Ns60 8,300.00 Pc/s 15 E-cab Battery 11,200.00 -wiper Blades Pc/s 50 12" 500.00 Pc/s 50 14" 550.00 Pc/s 50 16" 600.00 Pc/s 50 17" 650.00 Pc/s 50 18" 700.00 Pc/s 50 19" 700.00 Pc/s 50 20" 750.00 Pc/s 50 21" 800.00 Pc/s 50 24" 850.00 Pc/s 50 26" 900.00 -lot 1 Navotas Motorpool Vehicle Repair And Maintenance Tools & Other Supplies Navotas Motorpool Vehicle Repair And Maintenance Tools & Other Supplies 200,000.00 Gal. 100 Car Wash And Wax Shampoo 330.00 Bottle/s 100 Car Wax, Wax And Dry, 769ml 880.00 Oz. 100 Carnauba Cleaner Paste Wax 14 Fl 850.00 Bottle/s 100 High Gloss Tire Black, 250ml 330.00 Pc/s 150 Chamois Towel 380.00 Pack/s 150 Microfiber Absorbent Square Towel 40*40cm 250.00 Set/s 10 6-32mm Combination Wrench Set 4,500.00 Set/s 10 Professional Car Tools Socket Wrench Complete Set 7,800.00 Set/s 10 Diagonal Combination Long Nose Pump Plier Pliers Set 2,000.00 Set/s 10 Tools Original Rapid Cross Wrench 17,19,21,23mm 2,140.00 Set/s 10 Vise Grip Set 5wr And 10wr (set) 2,500.00 Pc/s 10 Adjustable Wrenches Set (6", 8", 10") 1,500.00 Pc/s 10 High Pressure Washer Water Spray Gun 726.00 Pc/s 10 High Pressure Hose 20meters 2,915.00 Set/s 10 Power Sprayer Repair Kit - V-packing And Valve Seal 600.00 Pc/s 10 Lengthened Squeegee Cleaner Brush Shower Car Wiper Sponge 450.00 Pc/s 10 Industrial Multi-function Grease Gun (500g - 8500psi) 1,500.00 Unit 10 Electric Car Polisher Machine Auto Polishing Buffing 2,200.00 Pc/s 10 Soft Wool Clean Polishing Buffing Bonnet Pad For Car Auto 180mm/7" 420.00 Unit/s 1 Hydraulic Press 10 Ton 39,200.00 Unit/s 3 Bottle Jack 20tons 6,000.00 Unit/s 10 3 Tons Industrial Jack Stand 2pcs / Pair Iht 3,100.00 Unit/s 10 70mai Car Jump Starte Portable 70mai Car Jump Starte Portable 4,100.00 Pc/s 10 High Pressure Washer Brass Quick Coupler Connectors 600.00 Pack/s 50 Tubeless Tire Seal Strip Repair Plug 250.00 Pack/s 50 Tire Patches 50mm 1,000.00 Set/s 20 Auto Tire Repair Kit Tool 650.00 Can 50 Vulcanizing Solution 400.00 Pc/s 10 Car Tire Repair Kit Roller Auto Patch Roller 850.00 Gallon/s 20 Bac-to-zero Solution 4,000.00 Gallon/s 20 Disinfectant Solution 1,100.00 Set/s 10 Booster Cable 800amp Heavy Duty 5.0m 12/24v With Plastic Case 4,500.00 Pc/s 10 Heavy Duty Plastic Tool Box 980.00 Unit 2 Original Industrial (empty) Roller Cabinet With 7pcs Drawers 29,000.00 Set/s 10 Spark Plug Wrench Set 16" And 21" 1,700.00 Set/s 10 8pcs Screwdriver Set - Heavy Duty 1,545.00 Unit 10 6t/8t/12t Hydraulic Crimper Tool Kit Tube Terminals Lugs Battery Wire Crimping Force 3,800.00 Set/s 10 18pcs Hex Key And Torx Key Set(allen) 914.00 Pc/s 10 Philip Screw 200mm 310.00 Pc/s 10 Screw Driver 200mm 310.00 Set/s 1 Mini Obd2 Scanner Car Diagnostic Tools 25,000.00 Can 100 Brake Cleaner 650.00 Can 100 Electronic Contact Cleaner 650.00 Can 100 Anti Rust Lubricant 277ml 550.00 Pc/s 100 Epoxy Steel 210.00 Pc/s 100 Electrical Tape, Big 90.00 Pc/s 50 Tapelon 30.00 Unit 1 3 Jawed Puller 1,500.00 Set/s 1 Inner Bearing Puller 1,500.00 Set/s 1 Car Steering Wheel Puller Removal Tool 1,200.00 Set/s 1 Caliper Piston Compressor Press Tool Kit 1,200.00 Set/s 1 Snapring Plier Set 1,500.00 30 Can Grease 350.00 30 Can Chain Lube 950.00 50 Pc/s Electrical Tape, Small 60.00 20 Pc/s Boat Battery 3sm 9,900.00 50 Pc/s Floor Matting 1,600.00 50 Pc/s Seat Cover 2,800.00 60 Pc/s Dashboard Matting 650.00 150 Pc/s Car Headlight Cleaner 350.00 150 Pc/s Car Glass Cleaner 350.00 2 Set/s High Pressure Washer 1700w, 220v 6,000.00 20 Assy./s Car Key Duplicate 800.00 50 Unit/s Bottle Jack 4tons 3,000.00 100 Pc/s Car Air Freshener 210.00 1 Unit/s 2hp Air Compressor, Cylinder: 2, Phase: 1, Pressure: 115, Psi Capacity: 88liters 32,500.00 100 Btls Acid Rain Remover (250ml) 450.00 1 Unit Water Dispenser 8,000.00 1 Unit Dc Inverter Mma-300 Welding Machine 20,000.00 1 Unit " Oxy-acetylene Cutting Outfit W/complete Accessories Oxygen Cylinder, Acetylene Cylinder W/content 28,000.00 2 Unit Heavy Duty Soldering Iron 300a/200a 6,300.00 10 Kilos " Stainless Steel Electrode 308-1/16 1,500.00 20 Kilos Bronze Rod 1/8" 150.00 20 Can Soldering Paste Soldering Paste 300.00 20 Roll Lead Soldering Wire (250g) 500.00 20 Pound Borax 1 350.00 1 Unit Cordless Impact Wrench 18v 12,500.00 1 Unit Hydraulic Floor Jack (double Pump, Low Profile), Model:asj-5l Max Lifting Cap: 5tons, Lifting Height: 75-500mm, Net Weight: 45kgs 20,000.00 2 Unit 40" Car Creeper 2,100.00 1 Unit Automatic Wire Stripper Cutting Crimper 8 1/4" Detection Cutter 4in1 1,800.00 5 Set/s T- Handle Socket Wrench #8,10,12,14,17,19 1,500.00 10 Set/s Wrench 8-32mm 2,000.00 3 Unit Air Blow Gun / Air Duster 16mm 350.00 5 Unit Vice Grip 1,000.00 5 Unit Hammer 650.00 5 Unit Voltage Tester Car Truck Circuit Tester Pen Automotive 450.00 5 Unit Battery Load Tester 100amp Load 1,100.00 5 Unit Spout Funnel For Oil 1,600.00 5 Unit Car Repair Inspection Lamp Work Light 450.00 5 Set/s Torque Wrech 1/2drive Click Type 2,000.00 Unit 5 Jack Stand 6 Tons, Min Height: 382mm, Max Height: 600mm 5,600.00 Set/s 5 Steel Toe Rubber Boots 1,200.00 Set/s 10 Mechanical Heavy Duty Working Gloves 200.00 Set/s 5 Safety Shoes High Cut Sewed And Vulcanized Leather Safety Shoes Boots 650.00 Pc/s 5 Leather Long-sleeved Apron Waterproof Oil-proof 900.00 Set/s 10 Arm Band Heat Protector 450.00 Pc/s 5 Cover All Safety Suits 1,100.00 Pc/s 5 Hard Hat Safety Helmet 500.00 Gallon/s 20 Water Soluble Oil Degreaser 400.00 Pc/s 300 Rags 3.00 Pc/s 300 Sand Paper- #600,#1000,#1,200 10.00 Set/s 10 Wire Brushes Set Nylon,steel,stainless 100.00 Pc/s 10 Top Box Alloy, 45l 10,800.00 Set/s 10 Top Box Bracket 2,200.00 Abc:php1,000,000.00 Delivery Schedule: By Ordering Agreement (terms Of Reference Attached To The Pr) -spare Parts Must Be Deliver Within 3 Calendar Days -tools & Supplies Within 15 Calendar Days Upon Receipt Of The Delivery Ordering Contract Note: For Other Information, Queries And Specifications Pertaining To The Said Request Please Coordinate With Our Canvasser (please Secure Complete List And/or Rfq Form From Ms. Maricar E. Pablo, At 09676781263 Pauline Anne S. Sioco At 09338100230, And Roxette May P. Poblete At 0936-493-5632 Or Email Address: Procurement@navotas.gov.ph) Terms And Conditions: 1. Bidders Shall Provide Correct And Accurate Information Required. 2. Bidders May Quote For All The Items. 3. Price Quotation/s Must Be Valid For A Period Of Thirty (30) Days Calendar Days From The Date Of Submission. 4. Price Quotation/s, To Be Denominated In Philippine Peso Shall Include All Taxes, Duties And/or Levies Payable. 5. Quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. 6. Delivery Period Expressed Merely In Days Or Working Days Shall Be Rejected. 7. Award Of Contract Shall Be Made To The Lowest Quotation (for Goods And Infrastructure) Or, The Highest Rated Offer (for Consulting Services) Which Complies With The Minimum Technical Specifications And Other Terms And Conditions Stated Herein. 8. Any Interlineations, Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initiated By You Or Any Of Your Duly Authorized Representative/s. 9. The Item/s Shall Be Delivered As Indicated In The Approved Bac Resolution/purchase Order. 10. The Procuring Entity Concerned Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Technical Specifications. 11. Liquidated Damages Equivalent To One Tenth Of One Percent (0.001%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. The City Government Of Navotas Shall Rescind The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. For The Committee Original Signed Atty. Joel Joselito D. Parong Bac Chairperson

Details: Sources Sought: W9128f25sm009 general. This Is A Sources Sought Notification For Informational/market Research Purposes Only. This Is Not A Request For Proposal, Quotation Or Bid, Nor A Synopsis Of A Proposed Contract Action Under Far Subpart 5.2. notice Details. The U.s. Army Corps Of Engineers (usace), Northwestern Division, Omaha District (cenwo) Has Been Tasked To Identify Interest In A Design-build Contract For Construction Services As Defined Below In Support Of Cenwo’s Design And Construction Effort At The Fort Harrison Veteran’s Affairs Medical Center (vamc), Ft Harrison, Mt. Responses To This Sources Sought Announcement Will Be Used By The Government To Determine The Appropriate Level Of Small Business Participation And To Develop The Acquisition Strategy. The North American Industrial Classification Code (naics) For This Requirement Is: 236220, “commercial And Institutional Building Construction”. The Related Size Standard Is: $45m. the Purpose Of This Sources Sought Notice Is To Gather Information On The Interest, Capabilities, And Qualifications Of Small And Large Businesses In The Industry, Alongside Collecting Data On The Recent History Of Construction Projects Within The Local Labor Market. This Notice Supersedes All Previous Requests For Cenwo’s Design And Construction Efforts At Fort Harrison. This Effort Targets: small Businesses (sb small Disadvantaged Businesses, Including 8(a) Firms historically Underutilized Business Zones (hubzone) economically Disadvantaged Women-owned Small Businesses (edwosb) service-disabled Veteran-owned Small Businesses (sdvosb) other Than Small Businesses (otsb) all Potentially Interested Parties Are Strongly Encouraged To Submit Responses. project Scope. Cenwo Intends To Procure Design-build Services For The Construction Of A New Central Utility Plant (cup) At The Fort Harrison, Mt Veterans Affairs Medical Center (vamc), Enhancing Campus Utility Services. This Initiative Represents A Significant Upgrade To The Vamc's Infrastructure, Promising Improved Efficiency, Reliability, And Sustainability Of Utility Services Across The Campus. current Status: Design And Planning Activities Are In Progress To Refine The Design-build Request For Proposal (rfp). new Construction: The Project Involves Building A New Cup With An Approximate Gross Square Footage (gsf) Of 15,300, Located North Of The Main Hospital Building. utility System: Establishment Of A Comprehensive Utilities Distribution System. demolition And Modifications: demolition Or Modification Of Existing Campus Heating, Hot Water, And Chilled Water Systems. demolition Of The Old Boiler Plant And Associated Backup Generator Buildings To Clear Space For New Developments. project Magnitude: The Construction Cost Is Projected To Range Between $25,000,000 And $100,000,000. timeline: The Estimated Duration From The Notice To Proceed (ntp) For Construction Is 1,277 Calendar Days. general Site Conditions: This Site Offers Both Challenges And Opportunities For Development, Given Its Proximity To Key Campus Facilities, Existing Infrastructure, And The Natural Slope Of The Land Which Must Be Considered For Effective Water Management And Site Planning. location: The Site Is Positioned Near The Property Line Abutting The National Guard Installation To The North, With The Existing B170 Warehouse Building To The West, And An Anticipated Parking Garage And Outpatient Mental Health Facility (to Be Constructed By Others) To The East. land Use: The Site Partially Overlaps With An Existing Parking Lot And Extends Into Undeveloped, Naturally Vegetated Land. topography: The Terrain Slopes From West To East, With Surface Water Runoff Characterized Predominantly By Sheet Flow; There Are No Significant Concentrated Flow Paths Within The Project Area. storage And Temporary Structures: The Area May Occasionally Host Shipping Containers, Either On Or Near The Site, Influencing Site Planning And Access Considerations. drainage And Roadways: Most Of The Campus Features Open-section Roadways Without Curbs Or Gutters, Except Around The Main Hospital Where Traditional Curb And Gutter Systems Are In Place. utilities: existing Infrastructure: The Site Is Crossed By Several Utility Services Including Sanitary Sewer, Signal/telecom, And Water Lines, Which Could Support Further Development. lighting: There Are Light Poles Along The Parking Lot's Perimeter, Potentially Affecting Lighting Design For New Constructions. landscaping: While The Hospital Area Is Characterized By Irrigated Turfgrass, This Feature Does Not Extend To The Project Site, Maintaining A More Natural Landscape. central Utility Plant: The Building's Design For The (cup Shall Focus On: accessibility: The Structural Engineering Of The Cup Emphasizes Accessibility, Providing Easy Access For Maintenance Of Overhead Piping And Duct Systems, And Accommodating Future Equipment Installations Or Removals. dimensions: The Structure Is Assumed To Be Approximately 30 Feet In Height And 15,300 Gross Square Feet In Area. construction Materials: Utilizes Load-bearing Concrete Masonry Unit (cmu) Walls, Finished With An Exterior Face Brick That Aligns With The Campus's Architectural Style. rain-screen System: Employed Across All Exterior Walls To Effectively Control Moisture: components: Includes An Outer Brick Veneer, An Intermediate Air Space For Drainage, Rigid Insulation For Thermal Resistance, And A Vapor Barrier Directly On The Cmu To Prevent Moisture Ingress. composite Metal Panels: Strategically Placed To Offer Visual Distinction Or Meet Specific Functional Requirements, These Panels Also Incorporate A Rain-screen System For Moisture Management. aesthetic And Functional Integration: The Building's Design Shall Not Only Blend With The Existing Campus Architecture But Also Support Operational Efficiency. durability And Maintenance: The Use Of Modern Construction Techniques And Materials Ensures The Structure's Longevity And Ease Of Maintenance, Adhering To Contemporary Standards For Energy Efficiency And Building Performance. utilities Distribution System: The Distribution System For The New Cup Shall Be Engineered To Integrate With Both The Future Hospital Complex And The Existing Steam And Chilled Water Systems. The Main Connection From The Cup To The Main Hospital (building 154) Will Occur Via The Primary Utilidor, Terminating At Mechanical Room B100 In The Building's Basement. From Here, Utility Piping Will Connect To Final Equipment Points Either Through Secondary Utilidors, The Crawl Space Beneath Building 154, Or By Routing Through Other Existing Buildings. The Bulk Oxygen Tank And Distribution System Must Also Be Relocated From Its Current Location On Patriot’s Way, To A New Slab Located Near Building 170 (warehouse), And New Connections To And Through The Primary Utilidor Must Be Made To Building 154. This System Is Primarily Routed Through New Underground Utility Corridors, Approximately 8 Feet By 8 Feet, And Extends Into Existing Structures To Serve The Heating, Cooling, And Domestic Hot Water Requirements Of Several Buildings: building 141, Including The Hydronic Plant building 154 building 154a building 169 future Building 173 in Addition To The Main Utility Conduits For Steam, Steam Condensate, And Chilled Water, The Utilidors Will Be Equipped With: lighting: To Ensure Safe Working Conditions. ventilation: To Maintain Air Quality Within The Corridors. drainage: As Mandated By Building Codes To Handle Potential Leaks Or Moisture. the Design Of The Utilidors Will Prioritize Safety, Providing Adequate Space For Maintenance And Operations Personnel. building System Connection And Demolition: This Approach Ensures That The New Utility Systems Are Effectively Integrated While Maintaining Or Improving The Operational Capabilities Of The Existing Infrastructure. steam Utility Connections: New Steam Utilities From The Cup Will Be Integrated With The Existing Steam Systems Within The Buildings, Ensuring A Seamless Transition. hydronic System Upgrade: building 141: The Current Hydronic Heating Boilers Will Be Replaced By Shell And Tube Heat Exchangers. This Upgrade Will Convert Steam Into Heating Hot Water, Preserving The Functionality Of The Existing Hydronic Hot Water Distribution System. chilled Water System Integration: utility Linkage: New Chilled Water Utilities From The Cup Will Connect To The Existing Chilled Water Systems Across The Campus. connections: The New Chilled Water Connections To Each Existing Chilled Water Distribution System Requires A Transition From The New Chilled Water Only System To The Existing Glycol-based System. backup Preservation: The Existing Chillers And Distribution Systems Will Be Kept Operational As A Backup Measure. control Systems For Chilled Water: operational Flexibility: Each Connection Point In The Chilled Water Systems Will Feature: flow Metering: To Accurately Measure Water Flow. temperature Monitoring: For Precise Control Of Cooling Capacity. motorized Valving: Enabling The Selection Between Using The Cup's Chilled Water Or Operating Individual Building Chillers, Enhancing System Flexibility And Efficiency. building 141 (existing Hydronic Plant): current Equipment: The Facility Currently Houses Two Superior Fire Tube Hot Water Boilers From 2010, Each With A Maximum Allowable Working Pressure (mawp) Of 60 Psig, Rated At 200 Boiler Horsepower (bhp) Or 6,700,000 Btu/h (mbh), And Two Patterson Kelly Hot Water Boilers From 2015, Boasting An Mawp Of 160 Psig, Rated At Approximately 60 Bhp Or 2,000,000 Btu/h (mbh). upgrade Plan: These Boilers Will Be Substituted With Shell And Tube Heat Exchangers, Supported By The New Central Utility Plant (cup). The Old Equipment Will Be Salvaged, With The Value Recaptured In The Project Cost. building 169 Extension: The Hydronic Heating Boilers And Domestic Water Heaters In Building 169 Will Also Transition To Shell And Tube Heat Exchangers, While Preserving The Existing Heating Hot Water And Domestic Hot Water Distribution Systems. building 169 (residential Rehabilitation): boiler Replacement: This Building Features Three Unitary Boilers, All Slated For Replacement By Heat Exchangers Connected To The New Cup. The Old Equipment Will Be Salvaged Off-site With Value Recaptured In The Project Cost. Service Must Be Maintained To The Existing Distribution System During The Transition, With Only Limited Disruptions During Cutover. building 171 (operational Boiler Plant): operational Continuity: Must Remain Active Until The Requirements For Commissioning And Stable Operation Of The New Cup Are Complete.. current Setup: Equipped With Three Low-pressure Superior Fire Tube Steam Boilers From 2012 (30 Psig Mawp, 8,625 Lb/hr Steam Capacity) And Two High-pressure Counterparts (150 Psig Mawp, 5,175 Lb/hr Steam Capacity). post-cup Operation: Building 171 Will Be Gutted And Maintained In An Environmentally Controlled State Following The Transition. This Equipment Is To Be Disposed Of Off-site And Salvaged With Value Recaptured In The Project Cost. The New Cup Is To Be Operational For A Full Warranty Period Prior To Decommissioning This Plant. Continuity Of Operations Is Required During The Transition To The New Cup. Provisions For Temporary Plant Operations Must Be Provided That Meet This Requirement During Transition. tank Removal: The Existing Approximately 10,000-gallon Underground Storage Tank Must Be Removed In Adherence To Montana Department Of Environmental Quality Standards, Followed By Site Restoration. service Access Road. Design And Build An Access Road Loop By Extending Devil’s Brigade Way Around The North End Of Campus To Allow For Service Access To B170 Once The Existing Devil’s Brigade Paralleling Patriot’s Way Is Closed For Construction. communications With Industry. cenwo Scheduled Teleconference For Project Information: date And Time: The Teleconference Is Scheduled For Thursday, 23 January 2025, At 1400 Cst. objective: This Session Will Provide Additional Project Details And Offer An Opportunity For Interested Parties To Ask Questions. Please Be Aware That The Information Shared During This Teleconference Is Provisional And Subject To Updates As The Project Progresses. how To Join: contact: To Obtain The Teleconference Access Information And Any Accompanying Exhibits, Please Reach Out To Adam Beaver, The Contract Specialist, Via Email At: Adam.l.beaver@usace.army.mil (mailto:adam.l.beaver@usace.army.mil). email Content: subject: Sources Sought W9128f25sm009 - Design-build Central Utility Plant (cup) At Ft. Harrison, Mt Vamc – Teleconference Info Request body: firm Details: Include Your Firm's Name And Cage (commercial And Government Entity) Code. participants: List The Names Of All Individuals From Your Firm Who Will Be Participating In The Teleconference. dial-ins: Specify The Expected Number Of Dial-ins From Your Organization. input For Acquisition Strategy: Provide Any Questions, Recommendations, Or Concerns That Could Impact The Acquisition Strategy For This Project. acquisition Input: This Is Your Opportunity To Influence The Project's Direction By Addressing Potential Issues Or Suggesting Improvements At An Early Stage. We Encourage All Interested Parties To Participate To Gain A Deeper Understanding Of The Project Scope And To Clarify Any Queries. project Labor Agreement Survey. As Part Of This Notice, Cenwo Is Also Soliciting Input From The Construction Community Regarding The Potential Application Of Project Labor Agreements (plas) For This Construction Project At The Veterans Administration Medical Center In Fort Harrison, Mt. A Pla Is Described As A Pre-hire Collective Bargaining Agreement Between A Prime Contractor And Labor Organizations, Setting Employment Terms For A Specific Construction Project Under 29 U.s.c. 158(f). A Project Labor Agreement (pla) Is A Tool That Agencies May Use To Promote Economy And Efficiency In Federal Procurement. Pursuant To Executive Order 13502, Agencies Are Encouraged To Consider Requiring The Use Of Project Labor Agreements In Connection With Large-scale Construction Projects. federal Acquisition Regulation (far 22.503) Policy: Plas Are Recognized As Tools To Promote Economy And Efficiency In Federal Procurement. Per Executive Order 13502, Agencies Are Encouraged To Consider Mandating Plas For Large-scale Construction Projects To Enhance Project Management And Outcomes. An Agency May Mandate That Contractors And Subcontractors On The Project Negotiate Or Become Party To A Pla With Labor Organizations If It Is Deemed That Such Agreements Will: advance The Federal Governments Interest In Achieving Economy And Efficiency In Federal Procurement, Producing Labor-management Stability, And Ensuring Compliance With Laws And Regulations Governing Safety And Health, Equal Employment Opportunity, Labor And Employment Standards And Other Matters; And be Consistent With Law. Reference: Far 52.222-33 Notice Of Requirement For Project Labor Agreement; Far 52.222-34 Project Labor Agreement please Provide Your Feedback On The Following: do You Have Knowledge Of Plas Being Used On Similar Local Projects? If So, Please Provide Supporting Documentation. are There Known Skilled Labor Shortages For The Crafts Required For This Project In The Area? Elaborate And Provide Documentation If Possible. are There Any Time-sensitive Constraints Or Scheduling Concerns That Could Impact The Project Timeline? Elaborate And Provide Documentation If Possible. specify Reasons How A Pla Might Advance The Federal Government's Interest In Economy And Efficiency In Procurement. specify Reasons Why You Believe A Pla Might Not Advance The Federal Government's Interest In Economy And Efficiency In Procurement. additional Information You Believe Should Be Considered On The Use Of A Pla On This Project. additional Information You Believe Should Be Considered On The Non-use Of A Pla On This Project. the Information Gathered In This Survey Should Include The Following Information On Projects Completed In The Last 2 – 5 Years: project Name And Location detailed Project Description initial Cost Estimate Vs. Actual Final Cost was The Project Completed On Time? number Of Craft Trades Present On The Project was A Pla Used? were There Any Challenges Experienced During The Project? submission Instructions. Formal Responses To This Sources Sought Notice Must Be Submitted Electronically (via Email) With: subject: “sources Sought W9128f25sm009 –design-build Central Utility Plant At The Ft. Harrison Va Contract”. please Email To Adam.l.beaver@usace.army.mil And Jeffrey.w.wyant@usacea.army.mil. Responses Must Be Received By 1400 On 13 January 2025, To Be Considered. Responses To This Sources Sought Shall Be Limited To Fifteen (15) Pages And Include The Following Information: firm's Name, Address, Point Of Contact, Phone Number, E-mail Address, Cage And Uei Number. firm's Business Category And Size To Include Any Official Teaming Arrangements As A Partnership Or Joint Venture. The Categories Include Large Business (include Summary Of Small Business Participation Metrics), Small Business, Small Disadvantaged Business, 8(a) Firm, Historically Underutilized Business Zones (hubzone), Economically Disadvantaged Women-owned Small Business (edwosb), Women-owned Small Business (wosb), And Service-disabled Veteran-owned Small Business (sdvosb). provide A Maximum Of Three D-b Project Examples, Similar In Size, Scope And Complexity To The Work Described In This Notice. Provide Details Of The Project(s) Including The Scope, Contract Number If Available, The Project’s Final Price, Start And End Dates Of The Construction Work, Complexity Of The Job, And Small Business Participation, If Applicable. Additionally, Identify Whether You Were The Prime Or A Subcontractor On The Project. Finally, Please Provide Any Project References Including Owner With Phone Number And Email Address. This Ensures Clarity And Brevity In The Analysis Process. The Government May Verify Information In Cpars Or Ppirs. provide Information On Your Bonding Capability. Specifically Identify Capacity Of Performance And Payment Bonds, Both Single And Aggregate. in Addition To The Submission For The Sources Sought Above, The Responses To The Project Labor Agreement Survey Shall Be Limited To Five (5) Pages, And Include The Following Information: responses To Project Labor Agreement Survey, 2., Items1. Through 7. substantiating Project Information As Outlined In Project Labor Agreement Survey, 3., Items1. Through 7. disclaimer And Important Notes. responses Will Be Shared With Government Personnel With A Need-to-know Basis, But Otherwise Will Be Held In Strict Confidence. this Notice Does Not Obligate The Government To Award A Contract. No Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Sources Sought Or Any Follow Up Information. The Government Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. Any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization's Qualifications To Perform The Work. Respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or To Provide Feedback To Respondents With Respect To Any Information Submitted. all Interested Firms Must Be Registered In The System For Award Management (sam) At Https://www.sam.gov And Remain Current For The Duration Of The Source Selection Process To Be Eligible For Award Of A Government Contract. cenwo Intends To Synopsize A Requirement For Design-build Construction Services In Support Of The Cup Project At The Ft Harrison, Mt Vamc. A Fully Developed Request For Proposal Is Currently Anticipated To Be Issued During The Spring/summer Of 2025.

Details: Description Gov. Celestino Gallares Multi-specialty Medical Center Invitation To Bid For Supply, Delivery, Installation, Testing And Commissioning Of 2 Lots Various Medical Equipment Batch 3 (re-bid) For Gov. Celestino Gallares Multi-specialty Medical Center 1. The Gov. Celestino Gallares Multi-specialty Medical Center (gcgmsmc), Through The Health Facilities Enhancement Program 2024 Intends To Apply The Sum Of Sixty Million Three Hundred Forty-four Thousand Nine Hundred Seventy-five Pesos Only (php60,344,975.00) Being The Abc To Payments Under The Contract For Cb:2024-12-0007. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Gcgmsmc, Through The Health Facilities Enhancement Program 2024 Intends To Apply The Sum Of Sixty Million Three Hundred Forty-four Thousand Nine Hundred Seventy-five Pesos Only (php60,344,975.00) Being The Abc To Payments Under The Contract For Each Lot/item.et Al. Lot No. Item/description Quantity Unit Cost Total Cost 1 Infusion & Monitoring System 1 37,344,975.00 37,344,975.00 2 Advanced Perfusion System, Cardiopulmonary Bypass Pump + In-line Blood Gas Monitoring Device 1 23,000,000.00 23,000,000.00 Grand Total 60,344,975.00 Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 2. The Gcgmsmc, Now Invites Bids For The Above Procurement Project. Delivery And Installation Of The Goods Is Required Within 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Bidders Should Have Completed, Within 3 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Gcgmsmc Through Electronic Mail Via Procurement@cpspecialtycenter.org Or Through The Cellular Number 09209437250. 5. A Complete Set Of Bidding Documents May Be Acquired And Downloaded By Interested Bidders From Gcgmsmc Google Drive From (procurement@cpspecialtycenter.org) On December 08, 2024– January 03, 2025 And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Indicated Below In Accordance With The Following Schedule: Lot No. Item/description Total Cost Bidding Documents Fee (in Philippine Peso) 1 Infusion & Monitoring System 37,344,975.00 25,000.00 2 Advanced Perfusion System, Cardiopulmonary Bypass Pump + In-line Blood Gas Monitoring Device 23,000,000.00 25,000.00 The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through Online Banking Or Online Deposit With The Following Bank Details: Bank Name: Development Bank Of The Philippines Account Name: Gcg Multi-specialty Medical Complex Account Number: 00-0-15490-780-5 "for Bidders Choosing To Pay Via Online Transfer Or Bank Deposit, Please Ensure That Proof Of Your Successful Transaction Is Promptly Sent To The Procurement Email Address: Procurement@cpspecialtycenter.org. In Compliance With Coa Circular Number 2021-014, Clause 5.2, An Acknowledgement Receipt Will Be Issued As Proof Of Verified And Received Payment. Access To Bidding Documents Will Be Granted Only Upon Presentation Of This Acknowledgement Receipt. 6. The Gcgmsmc Will Hold A Pre-bid Conference On The 17th Day Of December 2024 At 0900h At Room 3c-e310 Located At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur Cortes, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission On Or Before The 3rd Day Of January 2025 At 0900h At Gcgmsmc Procurement Office Room 3c-w327 Located At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur, Cortes, Bohol. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On The 3rd Day Of January 2025 At 0900h At Room 3c-e310 Located At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur Cortes. Bids Will Be Opened In The Presence Of The Bidders’ Authorized Representatives Together With Their Company Id. 10. The Gcgmsmc Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. Submission Of Hardcopies: Bidders Shall Submit Their Original Eligibility And Technical Documents Described In Itb Clause 10 In One Sealed Envelope Marked "original - Technical Component", And The Original Of Their Financial Component In Another Sealed Envelope Marked "original Financial Component", Sealing Them All In An Outer Envelope Marked "original Bid". Each Copy Of The First And Second Envelopes Shall Have 2 Copies And Similarly Sealed Duly Marking The Inner Envelopes As "copy No. 1 Technical Component" And "copy No. 1- Financial Component” And "copy No. 2- Technical Component" And "copy No. 2- Financial Component" And The Outer Envelope As "copy No. 1" And "copy No. 2" Respectively. These Envelopes Containing The Original And The Copies Shall Then Be Enclosed In One Single Envelope. Please Take Note That All Notarized Documents Must Be Treated As Original Copies For All The Submitted Documents (original, Copy 1, And Copy 2). It Is Imperative That Each Copy Retains Its Original Notarization To Ensure Legal Validity And Compliance. The Original And The Number Of Copies Of The Bid As Indicated In The Itb Clause 15 Shall Be Typed Or Written In Ink And Shall Be Signed By The Bidder Or Its Duly Authorized Representative/s. All Envelopes Shall: A. Contain The Name Of The Contract To Be Bid In Capital Letters; B. Bear The Name And Address Of The Bidder In Capital Letters; C. Be Addressed To The Procuring Entity's Bac In Accordance With Itb Clause 1; D. Bear The Specific Identification Of This Bidding Process Indicated In The Itb Clause 1 12. For Further Information, Please Refer To: Mary Grace L. Simbajon Jessa O. Quiñal Procurement Office Procurement Office Malayo Sur, Cortes, Bohol Malayo Sur, Cortes, Bohol Procurement@cpspecialtycenter.org Procurement@cpspecialtycenter.org +639209437250 +639452478632 December 06, 2024 Approved By: (signed) Doreen A. Lugo, Lpt Bac Chairperson Noted By: (signed) Laurence Elliot R. Tirol, Md, Fpcp Medical Center Chief ------------------------------------------------------------------------------------------------------------ Item: 1 Unit: Lot Qty: 1 Unit Cost: 37,344,975.00 Total Cost: 37,344,975.00 Description: Supply, Delivery, Installation, Testing & Commissioning Of Infusion & Monitoring System 150 Pump, Volumetric Infusion 40 Docking Station/s 1 Central Monitoring System 1 Mri-compatible Infusion System 1 Oximetry Monitoring System, Non-invasive Pump, Infusion Volumetric, 150 Units Size Less Than Or Equal To 210 (l) X 140 (w) X 73 (h) Millimeters (mm) Weight Less Than Or Equal To 1700 Grams (g) Screen Must Be At Least Three (3) Inches, Touchscreen, Thin Film Transistor (tft) Color Liquid Crystal Display (lcd), At Least 200 X 400 Pixel/s, Adjustable Brightness Levels Display Must Show The Following Information At Least: Infusion Status With Drug/s Name, Infusion Parameter/s, Real-time In-line Pressure; System Status Information With Infusion Mode, Intravenous Set Brand Or Bed Number, Alarm Symbol/s, Battery Status, Network Status, Relayed Status, And System Time; Must Show Infusion Status Indicator On The Door Accuracy: ≤ ± 4.5% Mode/s: Rate Mode, Dose Mode, Dose Time Mode, Time Mode, Sequential Mode, Intermittent Mode, Loading Dose Mode, Ramp Mode, Micro-infusion Mode And/or Drip Mode Must Support The Following Application/s : Intravenous Drug Infusion, Enteral Nutrition Feeding, And/or Blood Transfusion Flow Rate/s: 0.10-2300 Milliliter/s (ml) Per Hour (hr) And/or 0.10-2000 Ml/hr Increment/s: 0.01 Ml/hr (0.10-99.99 Ml/hr), 0.1 Ml/hr (100-999.9 Ml/hr), 1 Ml/hr (1000-2300 Ml/hr) Preset Time/s: 00:00:01-99:59:59 Preset Volume: 0.10-9999.99 Ml With Increments Of 0.01 Ml Accumulated Volume: 0.00-99999.99 Ml “keep Vein Open”: (kvo): 0.1-5.0 Ml/hr With Increment/s Of 0.01 Ml/hr Purge Rate: 0.1-2300 Ml/hr Bolus Rate: 0.1-2300 Ml/hr, Automatic Or Manual Occlusion Detection: 50-1125 Millimeters Mercury (mmhg) With At Least 15 Selectable Levels Such As 50, 150, 225, 300, 375, 450, 525, 600, 675, 750, 825, 900, 975, 1050, 1125 Mmhg); With Default Of 450 Mmhg; Pre Alarm Pops Up While Pressure Is Increasing; Auto-restart Capability Where On/off And Restart The Infusion When Occlusion Pressure Is Reduced; Pressure Unit/s Available Such As, Millimeters Mercury (mmhg), Kilo Pascal/s (kpa), Bar, And/or Pounds Per Square Inch (psi) Air Bubble Detection, With At Least Six (6) Level/s, 15, 50, 100, 250, 500, 800 Microliter/s; Air Accumulation 0.1-1.0 Ml Per 15 Minutes Dose Rate Unit/s Must Include The Following: Ng/kg/min, Ng/kg/hr, Ng/kg/24h; Ug/kg/min, Ug/kg/h, Ug/kg/24h, Mg/kg/min, Mg/kg/h, Mg/kg/24h; Mu/kg/min, Mu/kg/h, Mu/kg/24h; U/kg/min, U/kg/h,u/kg/24h; Ku/kg/min, Ku/kg/h, Ku/kg/24h; Eu/kg/min, Eu/kg/h, Eu/kg/24h; Mmol/kg/min,mmol/kg/h, Mmol/kg/24h; Mol/kg/min, Mol/kg/h, Mol/kg/24h; Mcal/kg/min, Mcal/kg/h, Mcal/kg/24h; Cal/kg/min, Cal/kg/h, Cal/kg/24h; Kcal/kg/min, Kcal/kg/h, Kcal/kg/24h; Meq/kg/min, Meq/kg/h, Meq/kg/24h; Auto Lock Time: 1-5 Minute/s Range With On/off Switch Drug Library Up To 5000 Drug/s, 30 Categories, Support For Color-coding History Log Up To 3500 Event/s Volume Collection Available In At Least 4 Method/s Including, 24 Hour Total, Current Total, Period, Timing Volume, Support History Rate Review Dose Error Reduction System Available Definition Of Dose Limit/s Automatic Alarm/s When Reaching Dose Limit/s Intravenous (iv) Administration Set Must Be Able To Accept Universal Iv Set/s Alarm/s Audible And Visual Alarm/s; Sound Volume Adjustable At Least Eight (8) Level/s 2 Level/s: High: Air In Line, Accumulated Air, Empty, Drop Error, Upstream Occlusion, Downstream Occlusion, Infusion Set Disengaged, No Infusion Tube, Infusion Set Error, No Drop Sensor, Battery Depleted, Volume To Be Infused (vtbi) Complete, Kvo Finish, Relay Invalid And/or System Error Low: Kvo Running, Battery In Use, Battery Error, Cms/egw Disconnected, Standby Time Expired, Dock Connection Interrupted, System Time Error, Relay Invalid Soon, Time Near End, Reminder And/or Low Battery Reminder: 1-5 Minute/s, On/off Switchable Connectivity Communication Wired And Wireless Usb Support Drug Library Import, Patient Data Import/export, History Record Export, Calibration Date Import/export; Multifunction Connector: Rs232, Nurse Call Connector, Dc Adapter Integration: Connect With Infusion Central Station, Connect With Central Monitoring System Battery Operating Time: More Than Or Equal To Five (5) Hour/s At 25 Ml/hr Charging Time: Less Than Or Equal To Five (5) Hour/s To Full Capacity Power Supply Voltage 100-240 Volt/s, Frequency 50-60 Hertz, (hz), Current 0.5-0.21 Ampere/s (a) Work Environment Level Of Resistance To Water And Dust At Least Ingress Protection Rating 33 (ip33) Classification Type Cf, Class 1, Ip33 Docking Station, 40 Units Size: Atleast270 (l) X 170 (w) X 390 (h) Millimeters (mm) Weight: Less Than Or Equal To 3900 Grams Display Screen At Least Three (3) Inches Organic Light Emitting Diode (oled) At Least 265 X 64 Pixels Resolution Showing The Following Information: Bed Number, Patient Name, Battery Status, Network Status, Total Volume For 24 Hours; Must Be Able To Connect Via Hl7 Protocol And Integrate With Hospital Information System/s And/or Electronic Medical Record/s Via Wired Or Wireless Protocol; Usb Support For Drug Library Importation, Patient Information Loading, Patient Data Export, History Record And/or Barcode Reader Connection Multifunctional Connector Rs232 And/or Nurse Call Connector Integration Capability To Synergise/connect With Patient Monitor, Connect With Infusion Central Station, And/or Connect With Central Monitoring System Night Mode Capability With On/off, Start Time, End Time And Sound Volume Adjustable History Record Up To 2500 Mounting Type For Horizontal And Vertical Pole Clamp: Horizontal Diameter Range 10 To 25 Mm; Vertical Diameter Range 15 To 40 Mm; One Pole Clamp Per Shelf Module Programmable Mode: Support Automatic Multi-channel Relay Maintenance: Support 2 To 24 Pumps Tool Free Assembly, Support Batch Calibration, Drug Library Import, And Software Upgrade/s Classification: Type Cf, Class 1, Ip33 Power Supply Battery: Lithium-ion 2500mah Operating Time Of At Least 2 Hours Charging Time At Most 6 Hours Ac Power: 100 To 240 V, 50 To 60 Hertz, 8 To 3.4 A Alarm/s Audible And Visual Alarm/s 2 Level/s: High: Battery Depleted, System Error : Low: Slave Controller Abnormal, Battery In Use, Low Battery, Battery Error, Local Area Network (lan) Internet Protocol (ip) Address Conflict, Wireless Lan Ip Address Conflict, Cms, Egw Disconnect Central Monitoring System System Component/s: Central Station System Center Which Connects Bedside Device/s Hardware: Display/s At Least 24 Inch Tft Lcd Screen/s Medical Grade, At Least Dicom 14, At Least Ip54 Rating Iec 60601, Touch Screen; Must Include Printer/s, Keyboard/s, Mouse/s And Speaker/s Main System Software Specification/s: Number Of Device Up To 64 Patient Monitor/s And Infusion Pump/s Per Station Alarm: Category: Physiological Alarm, Technical Alarm And System Prompt Remote Control: Alarm Switch, Alarm Limits, Alarm Priority, Alarm Pause And Alarm Reset Alarm Analysis: Support Alarm Statistics Trend Review: At Least 240 Hours; Full Disclosure At Least 240 Hours; Data Interface Connection Interface Integrated Egateway Or Standalone Egateway Mri Compatible Infusion System, 1 Unit Size Less Than Or Equal To 560 (l) X 540 (w) X 1540 (h) Mm Including Trolley, Excluding Iv Pole Weight Less Than Or Equal To 50 Kilograms Without Pump/s Display Screen At Least 3 Inches, Oled, 256 X 64 Pixels, Showing The Following Information: Bed Number, Patient Name, Battery Status, Network Status, Total Volume For The Past 24 Hours Infusion Of The Pump; Compatible Pumps At Least 4 Infusion Or Syringe Pumps Mri Scanner Compatibility For Both 1.5 And/or 3.0 Tesla Model/s Alarm/s Audible And Visual Alarm/s 2 Level/s: High: Battery Depleted, Magnet Indicator Battery Depleted, System Error : Low: Low Battery, Magnet Indicator, Battery Low, Battery Error, Lan Ip Address Conflict, Wlan Ip Address Conflict, Network Disconnected Magnet Indicator: Magnetic Field To Be Used In Magnetic Fields Up To 20 Mt; < 20 Mt Green; 20-40 Mt Yellow; > 40 Mt Red; Connectivity Communication Wired Or Wireless Usb Support Drug Library Import, Patient Data Import/export, History Record Export, System Upgrade Integration: Synergy With Patient Monitor, Connect With Infusion Central Station, Connect With Central Monitoring System Material: Ingress Protection Level Ip33 Safety Standards En 60601-1:2006 / A1:2013; En 60601-1-2:2015; En 60601-1-8:2007/a11:2017; F2025-15; F2182-19; F2213-17; F2503-20; Classification Type Cf Class Power Supply Battery: Lithium-ion At Least 3400mah; Ac Power: 100 To 240 V, 50 To 60 Hertz Dock: Operating Time At Least 10 Hours; Charging Time At Most 6 Hours Magnet Indicator: Operating Time Of At Least 720 Hours; Recharging Time At Most 8 Hours Oximetry Monitoring And Connectivity System, 1 Unit Expandable Patient Monitoring And Connectivity Hub That Integrates An Array Of Technologies, Devices, And Systems To Provide Multimodal Monitoring And Connectivity Solutions In A Single Clinician-centric Platform Regional Oximetry, Non-invasive Pulse Oximetry Display Resolution At Least 1280 X 800 Pixels, At Least 10 Inches Diagonal Size, Multi-touch Touchscreen; Customizable Multiple Screen Views To Feature The Most Applicable Data; Can Display Tissue Oxygen Saturation Of Specific Area; Can Display The Difference Between Current Rso2 And User Defined Baseline; Can Display The Difference Between Rso2 And Spo2; Pulse Rate; Perfusion Index; Pleat Variability Index; High-resolution Plethysmograph Waveform And/or Can Display Spectrogram Representing Activity For Both Sides Of The Brain; Must Have Ports Or Docks That Are Compatible To Plug And Play Modules For The Measurement Of Brain Function Monitoring, Regional Oximetry, And Non-invasive Pulse Oximetry Battery Capacity Is At Least Four Hours Module/s: Cerebral Oximetry At Least One, Pulse Co-oximetry At Least One Can Be Used As Bedside, Handheld And/or Transport Monitor Configurable Parameter And Alarm Settings By Patient Population Audible And Visual Alarms For Quick Identification Of Alarming Parameters With Redundant Speaker System. Particulars Vendor Shall Warrant That The Product Supplied Shall Equal The Published Specifications. Vendor Shall Provide No Less Than Five (5) Years Warranty On The System/equipment For Spare Parts And Service Upon Acceptance By End User/s. Vendor Agrees To Provide Free Of Charge All Parts And Labour Necessary To Repair The System During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Defective In Material Or Workmanship Under Normal Use. Vendor Must Conduct Quarterly Preventive Maintenance Program Or Frequently As Recommended By Principal / Manufacturer. Vendor Agrees To Add Equipment Down-time (in Number Of Days) To Total Warranty Period. Vendor Must Respond With Technical Support Staff, Either Remotely 2 Hours Or In-person Where Applicable, Within At Least Twenty-four (24) Hours Upon Notification Of End-user; And Must Perform Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification Of End-user; System/equipment Shall Be Delivered With At Least One (1) Copy Of All Service Manuals And At Least One (1) Copy Of All User Manuals. System/equipment Shall Be Delivered Complete With All Cabling, Connectors, Junction Boxes, Mounting Hardware, And All Other Accessories Necessary For Full Operation Of The System/equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid Any And All Software Necessary To Technically Support The System Shall Be Included Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied Devices Must Meet All Currently Applicable Safety Standards, Local And International Where Applicable. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted System For Not Less Than Five (5) Years After The Warranty Period Vendor Shall Agree To Provide Factory Or Principal Manufacturer Training And/or Certification For At Least One (1) In-house Biomedical Technologist Or Engineer And/or End-user. Vendor May Include Post-warranty Comprehensive Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimates For Major Spare Part/s Vendor To Shoulder Any Expenses Related To Delivery, Installation, Commissioning, Permit/s, Training And Other Sundries Necessary For The Complete Installation Of The Equipment Vendor Must Have Available Technical Staff And/or Office/s Within The Region Principal/manufacturer May Preferably Have An Existing / Active Quality Management System Certification E.g. Iso 13485 And/or Iso 9001 Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Principal’s / Manufacturer’s Products Must Have Been Present In The Local Market For The Past Ten (10) Years Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. -------------------------------------------------------------------------------------------------------------------- Item: 2 Unit: Lot Qty: 1 Unit Cost: 23,000,000.00 Total Cost: 23,000,000.00 Description: Advanced Perfusion System, Cardiopulmonary Bypass Pump + In-line Blood Gas Monitoring Device Heart & Lung Machine With Integrated Centrifugal Pump Built In Centrifugal Pump With The Following Specifications: Controls And Monitor Must Be Mounted To The Machine Drive Unit Must Allow For Interchangeable Components (must Have Flexible Drive Unit For Better Handling) Remote Control Display Panel Must Include The Centrifugal Status And Alarms Flow Sensor Must Be Non-invasive Type One (1) Integrated Centrifugal Pump Plus Either (a) Three (3) Singular Large Pumps + Two (2) Single Small Roller Pump Or (b) A Total Of Five (5) Roller Pumps With Flat Screen Monitor For Heart & Lung Machine Functionality Display Roller Pump Must Have Tubing Clamp Assembly Must Be A Rotatable Pump Head. With Hand Crank Intended For Manual Use In The Event Of Power Failure For Both Roller And Centrifugal Pump With Complete Safety Mechanism Device. Dual Pressure Module Sensor With Two (2) Cable Pressure Intended For Arterial Cardioplegia Digital Pressure Monitoring And Two (2) Manometer For Manual Monitoring. One (1) Temperature Module With At Least Two (2) Channels Level Sensor And Air Bubbles Sensor Intended For Adult And Pedia Circuits That Will Trigger The Machine To Temporarily Stop Avoiding Air Introduction To Patient With Mechanical Gas Blender For Oxygen And Compressed Air With Hose And Accessory Connectors Inclusion Of Vacuum Regulator Device Halogen Or Led Console Lamp With Flexible Arms Back-up Battery Which Can Provide Power For At Least 1 Hour Must Provide At Least Six (6) Pieces Of Tubing Clamp With Guard Can Be Powered By 230v ±10, 60hz With Four Heavy Duty Rolling Wheels And Non-scratching With Lock System Included In-line Blood Gas Monitoring Device The Machine Must Be Capable Of A Continuous Determination Of The Following Tests While On Cardiopulmonary Bypass (cpb): Blood Gas (ph, Pco2, Po2, Hco3, Be, So2) Electrolytes & Hematology (k+, Hgb, Hct) Patient Temperature Oxygen Deliver (do2) Inclusion Of Battery Pack To Ensure Uninterrupted Operation. Capable Of Displaying Alert/alarm Indicator When Parameters Fall Outside The Normal Values Must Be Lcd Or Led Screen Machine Must Be Portable And Fit With The Provided Pole Clamps/bracket For Monitoring In The Heart Lung Machine Cable Head Sensor For Testing Must Be Capable For Arterial Or Venous Sampling Monitoring Must Include Printer For Documentation Of Displayed Values 60 Hertz Machine Electrical Requirement Heater Cooler Machine, At Least Two (2) Unit/s Must Have At Least Two (2) Independent Circuits Intended Either For: A. Oxygenator Heat Exchangers And B. Patient Blankets One (1) Pair Of Hose With Corresponding Connectors For Each Independent Circuit Per Unit Can Be Powered By 230v ±10, 60hz Particulars Vendor Shall Warrant That The Product Supplied Shall Equal The Published Specifications. Vendor Shall Provide No Less Than Five (5) Years Warranty On The System/equipment For Spare Parts And Service Upon Acceptance By End User/s. Vendor Agrees To Provide Free Of Charge All Parts And Labour Necessary To Repair The System During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Defective In Material Or Workmanship Under Normal Use. Vendor Must Conduct Quarterly Preventive Maintenance Program Or Frequently As Recommended By Principal / Manufacturer. Vendor Agrees To Add Equipment Down-time (in Number Of Days) To Total Warranty Period. Must Provide Back-up Immediately Upon Notification Where Applicable. Vendor Must Respond With Technical Support Staff, Either Remotely (2 Hours) Or In-person Where Applicable, Within At Least Twenty-four (24) Hours Upon Notification Of End-user; And Must Perform Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification Of End-user; System/equipment Shall Be Delivered With At Least One (1) Copy Of All Service Manuals And At Least One (1) Copy Of All User Manuals. System/equipment Shall Be Delivered Complete With All Cabling, Connectors, Junction Boxes, Mounting Hardware, And All Other Accessories Necessary For Full Operation Of The System/equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products And Model/s Nearing And/or At The End-of-cycle Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid; Any And All Software Necessary To Technically Support The System Shall Be Included Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied Devices Must Meet All Currently Applicable Safety Standards, Local And International Where Applicable. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted System For Not Less Than Five (5) Years After The Warranty Period Vendor Shall Agree To Provide Factory Or Principal Manufacturer Training And/or Certification For At Least One (1) In-house Biomedical Technologist Or Engineer And Other Technical Staff (end-user/s); Vendor May Include Post-warranty Comprehensive Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimates For Major Spare Part/s Vendor To Shoulder Any Expenses Related To Delivery, Installation, Commissioning, Permit/s, Training And Other Sundries Necessary For The Complete Installation Of The Equipment Vendor Must Have Available Technical Staff And/or Office/s Within The Region Principal’s/ Manufacturer Products May Preferably Have An Existing/active Quality Management System Certification E.g. Iso 13485 And/or Iso 9001 Principal’s / Manufacturer’s Products Must Have Been Present In The Local Market For The Past Ten (10) Years, May Provide Certification Where Applicable Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances.