Heater Tenders

Details: This Procurement Will Establish And Maintain A Dynamic Purchasing System (dps) For Energy Efficiency Retrofit Installation Works Predominantly To Social Housing And Private Domestic Properties But May Extend To Other Property Types That Are Owned Or Managed By En:procure Members/licensees. The Lots Are: • Lot 1: Cavity Wall Insulation Including That Installed In Party Walls (b1) • Lot 2: Draught Proofing (b2) • Lot 3: Energy Efficient Glazing And Doors Including Replacement Insulating Glass Units (igu) (b3) • Lot 4: External Wall Insulation (b4) • Lot 5: Flat Roof Insulation (b5) • Lot 6: Floor Insulation (b6) • Lot 7: Hybrid Wall Insulation (b7) • Lot 8: Internal Wall Insulation (b8) • Lot 9: Loft Insulation (b9) • Lot 10: Pitched Roof Insulation (b10) • Lot 11: Room-in-roof Insulation (b12) • Lot 12: Multiple Insulation Measures And/or Draughtproofing (2 Or More B1,2,3,4,5,6,7,9,9,10 And/or 12) • Lot 13: Condensing Boilers, Natural Gas-fired And Liquefied Petroleum Gas-fired And Flue-gas Heat Recovery Devices (c1 & C3) • Lot 14: Heating, Hot Water System, Air Conditioning Or Ventilation Controls And Components (chp Etc) (c5) • Lot 15: Mechanical Ventilation With Heat Recovery (c7) • Lot 16: Warm-air Heating Systems (c9) • Lot 17: Electric Storage Heaters (including Electric Warm Air Heating Units That Incorporate Heat Storage) (d1) • Lot 18: Lighting Fittings, Lighting Systems And Lighting System Controls (d2) • Lot 19: Solar Pv • Lot 20: Solar Thermal • Lot 21: Air Source Heat Pump • Lot 22: Ground Source Heat Pump • Lot 23: Smart Heating Controls/monitoring • Lot 24: Integrated Systems (solar Pv, Battery Storage And Heat Pump) • Lot 25: Whole House Retrofit Solutions (combinations Of Any Measures From Above) Each Lot Will Be Subdivided Into A, B & C Where Each Lot Predominantly Covers The Following Geographical Areas Within England: • A Is Yorkshire And Humber • B Is East Midlands And • C Is North West Regions This Is Supplementary To Previous Notice - Https://www.contractsfinder.service.gov.uk/notice/be165d89-07ff-4151-b420-e55597b46473?origin=searchresults&p=1 Tender Documents Can Be Accessed Free Of Charge At - Https://procontract.due-north.com/advert?advertid=13ac382b-c990-eb11-810c-005056b64545&fromprojectdashboard=true

Details: Generator Radiator Replacement This Requirement Is For: The Correctional Service Of Canada, Ontario Region, Bath Institution. Trade Agreement: Canadian Free Trade Agreement (cfta). Tendering Procedures: All Interested Suppliers May Submit A Bid. Competitive Procurement Strategy: Lowest Priced Compliant Bid. Set-aside Under The Procurement Strategy For Indigenous Business: This Procurement Is Not Subject To Any Set-asides For Indigenous Suppliers. Comprehensive Land Claim Agreement: This Procurement Is Not Subject To A Comprehensive Land Claims Agreement. Security Requirements: This Contract Does Not Include Security Requirements. Nature Of Requirements: The Following Is A Summary Of The Statement Of Work For This Requirement. The Correctional Service Of Canada Requires The Services Of A Qualified Contractor To Supply And Install Two (2) New Radiators For A Cummins Qsk60-g6 Generator. Objectives: To Replace Two (2) Leaking Radiators With Two (2) New Compatible Cummins Radiators. Deliverables: The Contractor Must: • Drain The Engine Coolant From The Current Radiator Assemblies And Dispose Of It As Per All Federal And Provincial Environmental Safety Codes And Regulations. • Remove Front End Enclosure Housing Panels To Permit Radiator Removal. • Remove The Two Leaking Radiators, Disposing Of Them Offsite As Per All Federal And Provincial Environmental Safety Codes And Regulations. • Supply And Install Two (2) New Cummins Radiators, With Full Length Header Plates. • Replace All Gaskets (fibre) And Sealant. • Replace All Thermostats. • Replace All Radiator Hoses. • Supply And Fill Radiators With New Engine Coolant As Per All Federal And Provincial Environmental Safety Codes And Regulations. • Install Two (2) Radiator Heaters With Integral Pumps (to Reduce Thermal Expansion Shock). • Re-assemble Entire Enclosure Housing. • Supply, Connect And Fuel A Temporary, Two-point-two (2.2) Gigawatt Generator For The Entire Period That The Bath Generator Will Be Offline. • Ensure The Temporary Generator Automatically Starts And Provides Power To Both Bath And Millhaven Institutions Within Ten (10) Seconds In The Event Of Power Loss From The Distribution Grid. • Disconnect And Remove The Temporary Generator From The Site Once Replacement Of The New Radiators Is Complete. • Ensure The Cummins Qsk60-g6 Generator Is Reconnected And Functioning As Required. Any Conditions For Participation Of Suppliers Not Specified In Solicitation Documentation: None. Estimated Quantity Of Commodity: See Solicitation Document Statement Of Work And Basis Of Payment. Duration Of Contract And Time Frame For Delivery: Construction Time: The Contractor Must Perform And Complete The Work On Or Before March 31st, 2025. File Number: 21421-25-4942653 This Bid Solicitation Cancels And Supersedes Previous Bid Solicitation Numbers: 21423-23-4357694 Dated 2023/04/21 That Closed On 2023/05/25 At 10:00est And 21421-25-4883316 Dated 2024-10-29 That Closed On 2024-12-03 At 10:00est. Csc Will Provide A Debriefing Or Feedback Session Upon Request To Bidders Who Bid On The Previous Solicitations. Contracting Authority: Robin Riha Telephone Number: 613-328-9727 E-mail: Robin.riha@csc-scc.gc.ca Note To Bidders: Bidders Can Obtain The Complete Statement Of Work And Evaluation Criteria By Downloading The Solicitation Document And Associated Documents From The Canada Buys / Tender Opportunities Website. The Crown Reserves The Right To Negotiate With Suppliers On Any Procurement. Documents May Be Submitted In Either Official Language Of Canada (english Or French). After Contract Award, Bidders May Request A Debriefing On The Results Of The Bid Solicitation Process. Bidders Should Make The Request To The Contracting Authority Within Fifteen (15) Working Days Of Receipt Of The Results Of The Bid Solicitation Process. The Debriefing May Be In Writing, By Telephone Or In Person. Procurement Assistance Canada (pac) Offers Seminars To Businesses Interested In Learning How To Sell Goods And Services To The Government Of Canada. The Seminars Are Free. Topics Include: ? Understand The Federal Procurement Process; ? Learn About Searching For Opportunities; ? Find Out How To Bid On Opportunities; ? Discover How To Prepare To Sell To The Government. The Full Schedule Of Seminars Can Be Found On The Procurement Assistance Canada Website, Under Find An Event (procurement Assistance Canada: Find An Event - Canada.ca).

Description: Public tender Vob/a Demolition and dismantling work (din 18 459); Floor covering work (din 18 365); Screed work (din 18 353); Tiling and panel work (din 18 352); Scaffolding work (din 18 451); Painting and varnishing work - coatings (din 18 363); Bricklaying (din 18 330); Plastering and stucco work (din 18 350); Wallpapering (din 18 366); Drywall work (din 18 340); Carpentry and timber construction work (DIN 18 334); Demolition and dismantling work (DIN 18 459); Construction site equipment: Construction site equipment including mobile crane 1 piece; Construction fence, wire mesh with privacy net 250 m; Construction road + container parking areas, mineral mixture 200 m²; Lawn finishing care 350 m²; Work protection: 1-chamber lock 12 pieces; Partitioning, fiber-tight and stable 250 m²; Material airlock and personnel airlock; Scaffolding work: Facade/roof scaffolding, 2 kN/m², W06 2300 m²; Provision for scaffolding 78200 m²wo; Dismantling of contaminated building materials: Demolition of asbestos cement ventilation ducts 12 pieces; Demolition of asbestos-containing flexible panels + adhesive 215 m²; Demolition of KMF impact sound insulation, D=15mm 1250 m²; Demolition of PK-containing release paper 1100 m²; Demolition work: Demolition of tiles 750 m²; Demolition of PVC floor covering 900 m²; Demolition of cement screed 360 m²; Demolition of interior wall plaster 4200 m²; Demolition of ceiling plaster + reed mats 1590 m²; Demolition of interior doors + frames 95 pcs.; Shell work: Making / widening door openings 31 pcs.; Making masonry pillars 19 pcs.; Making foundations for external staircase 1 m³; Core drilling 138 pcs.; Roofing work: Installing line ventilators in interlocking tile roof 15 pcs.; Sun protection: Venetian blinds for windows 98 pcs.; Locksmith: External staircase 1 pc.; Adjusting balcony railings 15 pcs.; plastering work: lime cement ceiling plaster 462 m²; gypsum ceiling plaster 1250 m²; lime cement wall plaster 152 m²; gypsum wall plaster 1670 m²; screed work: quick cement screed, D= 40-45 mm 1230 m²; floor covering work: linoleum covering 1160 m²; drywall work: dry screed/rock wool insulation panels D= 100 mm 609 m²; plasterboard assembly walls 469 m²; plasterboard installation walls 116 m²; plasterboard sub-ceiling 832 m²; plasterboard suspended ceiling 340 m²; tiling and natural stone work: floor tiles 84 m²; wall tiles 53 m²; carpentry work: tea kitchens 2 pcs.; interior doors office doors 23 pcs.; Damp room doors 14 pieces; metalwork: aluminum frame doors 16 pieces; sheet steel doors including frames 11 pieces; painting work: glass fabric wallpaper + emulsion paint walls 2800 m²; coating suspended plasterboard ceilings 1171 m²; coating steel perimeter frames 44 pieces; coating sheet steel doors with frames 10 pieces; overhaul coatings walls + ceilings 940 m²; industrial floor coating epoxy resin 290 m²; building cleaning work: intermediate and final cleaning 1600 m²; locking system: BKS profile double cylinder 49 pieces; digital double knob cylinder 27 pieces; transponder 100 pieces; panic lock 34 pieces; access control smart relay 11 pieces, programming device + locking plan creation HLS + building automation: -1. And 2nd floor (the ground floor was already prepared in 2018): Dismantling of the complete sanitary installation from the equipment standard for apartments and equipping the building with sanitary facilities for an office building, consisting of dismantling 31 hand wash basins, 21 toilets/urinals, 12 shower trays and 6 bathtubs with vanity units, shower partitions and small parts, equipping the new toilet areas with 9 hand wash basins, 11 toilets, 2 urinals, 1 shower tray, 2 sinks, each with support frames, instantaneous water heaters and sanitary accessories and installations for two kitchen sinks, 150 m of PP+SML waste water pipes, 200 m of stainless steel drinking water pipes with press connections and thermal insulation, 16 fire extinguishers with wall boxes, dry riser with three feed-in and 15 extraction points with pipes. -approx. 40 new radiators with approx. 180 m of C-steel pipes. -12 fans for toilet exhaust air in accordance with DIN 18017-3 and one for battery room exhaust air with piping made of PPs, four split air conditioning units. -Approx. 350 sprinkler heads, approx. 500 m of sprinkler piping for a wet and a dry system, sprinkler distributor, a sprinkler station, nitrogen generator. -Building automation with simple monitoring tasks. Electrics: Installation cable NYM-J 3x2.5 mm² various. Installation types approx. 6,000 m, installation cable Nym-j 3x1.5 mm² approx. 3,500 m, cable halogen-free Nhxhx-j-fe180 up to 3x2.5 mm² approx. 2,000 m, installation cable E 30 up to 4x2x0.8 mm approx. 2,300 m, installation distributor 230 VI 250 A indoor installation wall mounting 8 pieces, circuit breaker 1-pole character b 16a 250 pieces, cable tray perforated steel strip galvanized H 60mm W up to 600 mm approx. 300 m, electrical installation duct device installation H/w 60/130mm plastic approx. 650 m, Bap-LED surface-mounted light 35W approx. 154 pieces, LED recessed downlight D=235mm, 16 W approx. 65 pcs., LED safety lights approx. 65 pcs., LED escape sign lights approx. 40 pcs., BMA signal generator optical flashing light approx. 100 pcs., loudspeaker for wall and ceiling mounting up to 2x6 W approx. 110 pcs., data cable Cat. 6a various installation types approx. 12,000 m, data connection box sym. Cat. 6a 2 ports approx. 170 pcs.

Description: Public tender Vob/a Demolition and dismantling work (din 18 459); Floor covering work (din 18 365); Screed work (din 18 353); Tiling and panel work (din 18 352); Scaffolding work (din 18 451); Painting and varnishing work - coatings (din 18 363); Bricklaying (din 18 330); Plastering and stucco work (din 18 350); Wallpapering (din 18 366); Drywall work (din 18 340); Carpentry and timber construction work (DIN 18 334); Demolition and dismantling work (DIN 18 459); Construction site equipment: Construction site equipment including mobile crane 1 piece; Construction fence, wire mesh with privacy net 250 m; Construction road + container parking areas, mineral mixture 200 m²; Lawn finishing care 350 m²; Work protection: 1-chamber lock 12 pieces; Partitioning, fiber-tight and stable 250 m²; Material airlock and personnel airlock; Scaffolding work: Facade/roof scaffolding, 2 kN/m², W06 2300 m²; Provision for scaffolding 78200 m²wo; Dismantling of contaminated building materials: Demolition of asbestos cement ventilation ducts 12 pieces; Demolition of asbestos-containing flexible panels + adhesive 215 m²; Demolition of KMF impact sound insulation, D=15mm 1250 m²; Demolition of PK-containing release paper 1100 m²; Demolition work: Demolition of tiles 750 m²; Demolition of PVC floor covering 900 m²; Demolition of cement screed 360 m²; Demolition of interior wall plaster 4200 m²; Demolition of ceiling plaster + reed mats 1590 m²; Demolition of interior doors + frames 95 pcs.; Shell work: Making / widening door openings 31 pcs.; Making masonry pillars 19 pcs.; Making foundations for external staircase 1 m³; Core drilling 138 pcs.; Roofing work: Installing line ventilators in interlocking tile roof 15 pcs.; Sun protection: Venetian blinds for windows 98 pcs.; Locksmith: External staircase 1 pc.; Adjusting balcony railings 15 pcs.; plastering work: lime cement ceiling plaster 462 m²; gypsum ceiling plaster 1250 m²; lime cement wall plaster 152 m²; gypsum wall plaster 1670 m²; screed work: quick cement screed, D= 40-45 mm 1230 m²; floor covering work: linoleum covering 1160 m²; drywall work: dry screed/rock wool insulation panels D= 100 mm 609 m²; plasterboard assembly walls 469 m²; plasterboard installation walls 116 m²; plasterboard sub-ceiling 832 m²; plasterboard suspended ceiling 340 m²; tiling and natural stone work: floor tiles 84 m²; wall tiles 53 m²; carpentry work: tea kitchens 2 pcs.; interior doors office doors 23 pcs.; Damp room doors 14 pieces; metalwork: aluminum frame doors 16 pieces; sheet steel doors including frames 11 pieces; painting work: glass fabric wallpaper + emulsion paint walls 2800 m²; coating suspended plasterboard ceilings 1171 m²; coating steel perimeter frames 44 pieces; coating sheet steel doors with frames 10 pieces; overhaul coatings walls + ceilings 940 m²; industrial floor coating epoxy resin 290 m²; building cleaning work: intermediate and final cleaning 1600 m²; locking system: BKS profile double cylinder 49 pieces; digital double knob cylinder 27 pieces; transponder 100 pieces; panic lock 34 pieces; access control smart relay 11 pieces, programming device + locking plan creation HLS + building automation: -1. And 2nd floor (the ground floor was already prepared in 2018): Dismantling of the complete sanitary installation from the equipment standard for apartments and equipping the building with sanitary facilities for an office building, consisting of dismantling 31 hand basins, 21 toilets/urinals, 12 shower trays and 6 bathtubs with vanity units, shower partitions and small parts, equipping the new toilet areas with 9 hand basins, 11 toilets, 2 urinals, 1 shower tray, 2 sinks, each with support frames, instantaneous water heaters and sanitary accessories and installations for two kitchen sinks, 150 m of PP+SML waste water pipes, 200 m of stainless steel drinking water pipes with press connections and thermal insulation, 16 fire extinguishers with wall boxes, dry riser with three feed-in and 15 extraction points with pipes. -approx. 40 new radiators with approx. 180 m of C-steel pipes. -12 fans for toilet exhaust air in accordance with DIN 18017-3 and one for battery room exhaust air with PPS pipes, four split air conditioning units. -Approx. 350 sprinkler heads, approx. 500 m of sprinkler pipes for a wet and a dry system, sprinkler distributor, a sprinkler station, nitrogen generator. -Building automation with simple monitoring tasks. Electrics: Installation cable NYM-J 3x2.5 mm² various. Installation types approx. 6,000 m, installation cable Nym-j 3x1.5 mm² approx. 3,500 m, cable halogen-free Nhxhx-j-fe180 up to 3x2.5 mm² approx. 2,000 m, installation cable E 30 up to 4x2x0.8 mm approx. 2,300 m, installation distributor 230 VI 250 A indoor installation wall mounting 8 pieces, circuit breaker 1-pole character b 16a 250 pieces, cable tray perforated steel strip galvanized H 60mm W up to 600 mm approx. 300 m, electrical installation duct device installation H/w 60/130mm plastic approx. 650 m, Bap-LED surface-mounted light 35W approx. 154 pieces, LED recessed downlight D=235mm, 16 W approx. 65 pcs., LED safety lights approx. 65 pcs., LED escape sign lights approx. 40 pcs., BMA signal generator optical flashing light approx. 100 pcs., loudspeaker for wall and ceiling mounting up to 2x6 W approx. 110 pcs., data cable Cat. 6a various installation types approx. 12,000 m, data connection box sym. Cat. 6a 2 ports approx. 170 pcs.

Description: Public tender Vob/a Demolition and dismantling work (din 18 459); Floor covering work (din 18 365); Screed work (din 18 353); Tiling and panel work (din 18 352); Scaffolding work (din 18 451); Painting and varnishing work - coatings (din 18 363); Bricklaying (din 18 330); Plastering and stucco work (din 18 350); Wallpapering (din 18 366); Drywall work (din 18 340); Carpentry and timber construction work (DIN 18 334); Demolition and dismantling work (DIN 18 459); Construction site equipment: Construction site equipment including mobile crane 1 piece; Construction fence, wire mesh with privacy net 250 m; Construction road + container parking areas, mineral mixture 200 m²; Lawn finishing care 350 m²; Work protection: 1-chamber lock 12 pieces; Partitioning, fiber-tight and stable 250 m²; Material airlock and personnel airlock; Scaffolding work: Facade/roof scaffolding, 2 kN/m², W06 2300 m²; Provision for scaffolding 78200 m²wo; Dismantling of contaminated building materials: Demolition of asbestos cement ventilation ducts 12 pieces; Demolition of asbestos-containing flexible panels + adhesive 215 m²; Demolition of KMF impact sound insulation, D=15mm 1250 m²; Demolition of PK-containing release paper 1100 m²; Demolition work: Demolition of tiles 750 m²; Demolition of PVC floor covering 900 m²; Demolition of cement screed 360 m²; Demolition of interior wall plaster 4200 m²; Demolition of ceiling plaster + reed mats 1590 m²; Demolition of interior doors + frames 95 pcs.; Shell work: Making / widening door openings 31 pcs.; Making masonry pillars 19 pcs.; Making foundations for external staircase 1 m³; Core drilling 138 pcs.; Roofing work: Installing line ventilators in interlocking tile roof 15 pcs.; Sun protection: Venetian blinds for windows 98 pcs.; Locksmith: External staircase 1 pc.; Adjusting balcony railings 15 pcs.; plastering work: lime cement ceiling plaster 462 m²; gypsum ceiling plaster 1250 m²; lime cement wall plaster 152 m²; gypsum wall plaster 1670 m²; screed work: quick cement screed, D= 40-45 mm 1230 m²; floor covering work: linoleum covering 1160 m²; drywall work: dry screed/rock wool insulation panels D= 100 mm 609 m²; plasterboard assembly walls 469 m²; plasterboard installation walls 116 m²; plasterboard sub-ceiling 832 m²; plasterboard suspended ceiling 340 m²; tiling and natural stone work: floor tiles 84 m²; wall tiles 53 m²; carpentry work: tea kitchens 2 pcs.; interior doors office doors 23 pcs.; Damp room doors 14 pieces; metalwork: aluminum frame doors 16 pieces; sheet steel doors including frames 11 pieces; painting work: glass fabric wallpaper + emulsion paint walls 2800 m²; coating suspended plasterboard ceilings 1171 m²; coating steel perimeter frames 44 pieces; coating sheet steel doors with frames 10 pieces; overhaul coatings walls + ceilings 940 m²; industrial floor coating epoxy resin 290 m²; building cleaning work: intermediate and final cleaning 1600 m²; locking system: BKS profile double cylinder 49 pieces; digital double knob cylinder 27 pieces; transponder 100 pieces; panic lock 34 pieces; access control smart relay 11 pieces, programming device + locking plan creation HLS + building automation: -1. And 2nd floor (the ground floor was already prepared in 2018): Dismantling of the complete sanitary installation from the equipment standard for apartments and equipping the building with sanitary facilities for an office building, consisting of dismantling 31 hand basins, 21 toilets/urinals, 12 shower trays and 6 bathtubs with vanity units, shower partitions and small parts, equipping the new toilet areas with 9 hand basins, 11 toilets, 2 urinals, 1 shower tray, 2 sinks, each with support frames, instantaneous water heaters and sanitary accessories and installations for two kitchen sinks, 150 m of PP+SML waste water pipes, 200 m of stainless steel drinking water pipes with press connections and thermal insulation, 16 fire extinguishers with wall boxes, dry riser with three feed-in and 15 extraction points with pipes. -approx. 40 new radiators with approx. 180 m of C-steel pipes. -12 fans for toilet exhaust air in accordance with DIN 18017-3 and one for battery room exhaust air with PPS pipes, four split air conditioning units. -Approx. 350 sprinkler heads, approx. 500 m of sprinkler pipes for a wet and a dry system, sprinkler distributor, a sprinkler station, nitrogen generator. -Building automation with simple monitoring tasks. Electrics: Installation cable NYM-J 3x2.5 mm² various. Installation types approx. 6,000 m, installation cable Nym-j 3x1.5 mm² approx. 3,500 m, cable halogen-free Nhxhx-j-fe180 up to 3x2.5 mm² approx. 2,000 m, installation cable E 30 up to 4x2x0.8 mm approx. 2,300 m, installation distributor 230 VI 250 A indoor installation wall mounting 8 pieces, circuit breaker 1-pole character b 16a 250 pieces, cable tray perforated steel strip galvanized H 60mm W up to 600 mm approx. 300 m, electrical installation duct device installation H/w 60/130mm plastic approx. 650 m, Bap-LED surface-mounted light 35W approx. 154 pieces, LED recessed downlight D=235mm, 16 W approx. 65 pcs., LED safety lights approx. 65 pcs., LED escape sign lights approx. 40 pcs., BMA signal generator optical flashing light approx. 100 pcs., loudspeaker for wall and ceiling mounting up to 2x6 W approx. 110 pcs., data cable Cat. 6a various installation types approx. 12,000 m, data connection box sym. Cat. 6a 2 ports approx. 170 pcs.

Details: Description Republic Of The Philippines Department Of Health Western Visayas Sanitarium And General Hospital Santa Barbara, Iloilo Invitation To Bid For Supply, Delivery And Installation Of Various Hospital Equipment Ib No. 2024-12-018-g The Western Visayas Sanitarium, Through Its Bids And Awards Committee (bac), Invites Suppliers/manufacturers/distributors To Apply For Eligibility And To Bid For The Hereunder Project: Name Of Project : Supply, Delivery And Installation Of Various Hospital Equipment Location : Western Visayas Sanitarium And General Hospital, Inangayan, Santa Barbara, Iloilo Approved Budget For : Php 34,665,000.00 The Contract (abc) Fund Source : Caf No. 2024-133-gf Delivery Period : Within Ninety (90) Working Days After Receipt Of The Notice To Proceed Line Items Abc: Php 34,665,000.00 Lot 1 No. Description Unit Of Measure Quantity Approved Budget Cost (php) 1 Electrical Machine. Brand New. Product Specifications: Combination Of Electrotherapy And Ultrasound; With 3 Independent Channels And Body Diagram Installed; Power Supply: Ac 100- 240 V, Number Of Channels: 3 Independent (2 For Electrotherapy, 1 For Ultrasound) Electrotherapy; Ten& Ems, Ultrasound Functions; Electrode Pads For Tens & Ems; Us Probe Head: Large And Small. Warranty -1 Year From Delivery And Installation. Unit 1 290,000.00 2 Hand Dynanometer. Brand New. Product Specifications: Hydraulic Adjustable Handle. Strength Can Be Viewed In Pounds Or Kilogram. Can Measure Up To 90kg (200lbs.). Durable Metal Gauge. Warranty –at Least 6 Months Upon Delivery And Installation. Unit 1 55,000.00 3 Parallel Bars. Brand New. Product Specifications: Adjustable And Foldable. Stainless Steel Bars And Steel Base. Height Adjust Within 26''-40''. Width -24''-36". Length Ranges: 7-10 Feet. Warranty -at Least 6 Months Upon Delivery And Installation Unit 1 50,000.00 4 Pulley System. Brand New. Product Specifications: Single Handle/dual Tower. Chest And Floor Height Mounted Handle. Easily Adjustable Handles. Wheelchair Accessible. Warranty –at Least 1 Year Upon Delivery And Installation. Unit 1 150,000.00 5 Pbx, Smart Hybrid. Brand New. Product Specifications: Designed For Telemedicine Use. Genuine And High Quality Brand. Pabx Built-in Extensions 16 Analog. At Least 2 Card Slots And 2 Slots Trunk Extension Card Switch System. Ability To Equip Sub-frame Ns-320; 12-32 Trunk Extensions. Sub-frame To Extend Pbx Ns300. Port Connected To The Main Frame. Dimensions: 40-45 X 35-36 X 86-90 Cms. Warranty –at Least 6 Months From Delivery And Installation * Unit 1 100,000.00 6 Uninterrupted Power Supply. Brand New. Products Specifications: Designed For Telemedicine Operation. 3000va. Output Power Capacity-3000va, Mount: 3u Rack Mountable. Nominal Output Voltage -230v. Dimensions: 20-22 X 19-20 X 5-6 Inches. Warranty –at Least 6 Months Upon Delivery And Installation. * Unit 1 400,000.00 7 Medical Waste Shredder. Brand New. Product Specifications: 20hp Motor Slow-speed And High Torque Dual Shaft Shredders, 5/16″ Wide Cutters, With Bearing Protection And Cleaning Fitters. Features: Efficiently Shred Syringes, Face Masks, Boxed Medical Waste, Pill Bottles, Etc., Available With A Split Cutting Chamber That Allows For Two Different Shred Widths Within One Shredder, The Manner Of In Feed And Output Are Also Divided. Includes Training And Certification, Warranty 1 Year Upon Installation Unit 1 350,000.00 8 Portable Multi-parameter Analyzer Flow Water Quality Testing. Brand New. Product Specifications: Measures Water Quality Parameter For Ph/ec/ise/do/temp. Mv/orp/px/resistivity/tds/sal./do Saturation. Features: Portable Device, Color High Contrast Lcd Touchscreen, Data Storage1000 Sets For Each Parameter, Support For Usb Communication, Ip65 Waterproof, Includes All Necessary Accessories And Consumables, Includes Training And Certification For Use, Warranty For 1 Year Upon Installation Unit 1 200,000.00 9 Water Purification System. Brand New. Product Specifications: 6000 Gdp Reverse Osmosis Machine. Up To 1200 Containers Per Day. Double U.s. Membrane. 2 Tanks 1000ltrs. For Raw & Product Water. At Least 28 Stages Of Water Filtration. To Include Piping Line From Water Station To Specified Areas Within The Health Facility. To Include Necessary. Building/structure For The Water Station. Service Warranty 1 Year After Delivery And Installation. To Include Service And User Training. Including Consumables: 50 Gallons Round Containers, 50 Gallons Slim Containers, 1 Sack Industrial Salt. * Unit 1 350,000.00 10 Anesthesia Machine With Cardiac Monitor. Brand New. Product Specifications: Main Gas Supply -oxygen, Air. Pin Index Supply System: Oxygen, Air. Ventilatior: With At Least Six (6) Ventilation Modes. Machine Must Be Able To Ventilate Patient Using The Preset Settings Provided By The End-user Even Presence Of Driving Gas Is Temporarily Unavailable. Ventilator Must Be Enclosed With Metal Casing To Prevent Entry Of Foreign Items Including Fluid. Ceramic Type Of Inspiratory And Expiratory Valve. Ventilator Must Have High Pressure Valve That Ensures Release Of Excess Pressure When Required. Ventilator Must Be Functional When Machine Is Connected Either Through Direct Power Supply Or Back Up Battery. Breathing System: The Volume Of The Compact Breathing System And Co2 Absorber Must Be 1.7l Excluding Hoses And Breathing Bag. Volume Of Co2 Absorber Reusable Canister Must Be 1.5l. With Bypass Valve Located In Breathing System Allowing Continuous Machine Operation While Changing Co2 Absorber. With Fresh-gas Decoupling Valve That Prevents Direct Entry Of Pressure In The Patient Airway When Pressing The O2 Flush Button, Peep And Pressure Limitation. With Breathing System That Can Be Detached From The Main Unit Without Tools Required. Breathing System Should Be Separated From The Main Unit With Mounting That Can Be Positioned From Any Direction Without Moving The Entire Anesthesia Machine. With Ceramic Type Of Inspiratory And Expiratory Valve. With Sample Gas Return Port. With Pup Off Pressure Release Valve Located At The Apl Valve. With Moisture Reduction System. Hot Steam Sterilization Can Be Carried Out At 134 ° C (273.2 ° F). With Heated Breathing System. Anesthesia Gas Supply Module: Range Of Fresh Gas Flow Indicators: 0.0 To 12.0 L/min. O2 Flush (bypass): At 87 Psi (6 Kpa X 100): Max. 75 L/min At 41 Psi (2.8 Kpa X 100): Min. 25 L/min. With Metering Valve And Dual Flow Tubes For Fresh-gas. With Integrated O2 Monitoring Located In The Screen. Vaporizer: With Two (2) Selectatec Vaporizer Mounting. With One (1) Unit Sevoflurane And One (1) Unit Isoflurane Vaporizer. Vaporizer Must Have No Cloth Component Which Allows Item To Be Functional Immediately Even Transporting It In An Upside Down Position. Oxygen Sensor: With Oxygen Sensor That Measures Percentage Of Oxygen. Flow Sensor: With Constant Temperature Hot-wire Anemometer Flow Sensor. Must Be Located Within The Anesthesia Unit Distal To The Patient Area. Flow Sensor Must Be Reusable. Auxillary Low Flow Oxygen: With Integrated Low Flow Oxygen Supply For Mask And Nasal Cannula Application. Writing Table/drawers/mounting: With At Least 3 Drawers As Storage For Other Accessories. With A Retractable Writing Table That Can Hold At Least 10kgs. Advanced And Safety Features: Functional Even The Battery Is Completely Discharged, All Pneumatic Functions Continue To Be Available (apl Valve, Breathing Pressure Gauge, Cylinder And Pipeline Gauges, Fresh Gas And Agent Delivery, And O2, Air, Flow Meters).manual Or Spontaneous Ventilation Can Be Maintained During Power Failure And Discharged Of Battery. In Case Of No Power And Totally Discharged Battery, Machine Must Be Shifted Automatically From Ventilator Mode To Manual Mode Without Any Switch Or Button Required. Start-up Time Must Be Less Than 15 Seconds. Power Input Data: Power Supply: Rating Non-configurable 100 To 240 Vac, 50/60 Hz, 145 Va. Battery Operation Time: Up To 2 Hours, Minimum Of 45 Minutes. Parameters: Minimum Tidal Volume (vt) Required: 20 Ml. Breathing Frequency (rate): 4 To 60 Bpm (1/min). Inspiratory Pressure: Peep + 5 To 65 Cmh2o. Inspiratory Flow (inspflow): 10 To 75 L/min In Volume And Pressure Control Modes, 10 To 85 L/min In Pressure Support And Simv/ps Modes. Inspiration Pause: 0 To 50 %. Simv Inspiratory Time: 0.3 - 4.0 Sec. Positive End Expiratory Pressure: (peep) 0 To 20 Cmh2o. Inspiration/expiration Ratio: (ti:te) 4:1 To 1:4. Pressure Limiting: 70 Cmh2o. Range Of Fresh Gas Flow Indicators: 0.0 To 12.0 L/min. Pressure Support Level: Peep + 3 To 20 Cmh2o. Min. Frequency For Apnoe-ventilation: (freq. Min.) 3 To 20 Bpm And “off”. Trigger Level: 2 To 15 L/min. Standard Accessories: One (1) Unit O2 Regulator, One (1) Unit Air Regulator, O2, Air Fittings And Hose Clamps, One (1) Unit Adult Anesthesia Circuit With 2l Bag. Biolight M12 Patient Monitor (basic Configuration). Technical Specification: Display/waveforms: Screen Size Display: Not Less Than 12" Color Tft Screen. Screen Navigation: Touch Screen With Quick Volume And Brightness Adjustment. Support Quick Key, Able To Access Specific Functions Or Perform Operations Easily And Quickly. No. Of Waveforms: At Least 7 Waveforms (using Standard Screen Display). Battery: Internal Battery Duration Must Be: ≥ At Least 240 (built In Battery). Can Upgrade Lithium Battery, Battery Power Supply ≥480 Min. Ecg: Ecg Leads: 3/5 Leads, Display Sensitivity: ×0.25, ×0.5, ×1, ×2, ×4,auto Gain, Must Have A Smart Lead Off Feature, Must Have An Ecg Calibration Feature, Must Have An St Segment Analysis And Monitoring. Heart Rate Range Must Be: Adu: 10 To 300 Bpm, Ped/neo: 10 To 350 Bpm, Must Have Two (2) Hr Averaging Method. With Ecg Multi-lead Synchronous Analysis Function, Analysis Of Multiple Cardiac Leads At The Same Time, Can Be Accurately Monitored In The Case Of Individual Lead Interference, With Intelligent Lead Fall Monitoring Function. St-segment Analysis Can Show The St Graphic, Which Help Indicates The St Alarm Status More Faster. Nibp: Nibp Measurements Must Comply With The American National Standard For Electronic Or Automated Sphygmomanometers: - (ansi/aami/iso 81060-2:2009, Ansi/aami Sp10:2002) In Relation To Mean Error And Standard Deviation. Measurement Mode： Manual, Auto, Stat, And Sequence. Sequence Mode Could Support 5 Different Modes. Maximum Measuring Interval In Auto Mode Must. Must Have An Overpressure Protection For Nibp. Temperature: Must Have Dual-channel Body Temperature Monitoring With Difference Display Measurements. Must Support Skin And/or Oral/rectal. If More Than One Temperature Probe Is Used, The Monitor Will Be Capable Of Calculating And Displaying A Delta Reading. Measuring Range: 0～50 ℃. Spo2: Must Be Used In Low Pi (perfusion Index). Resp: Detection Method: Respiratory Rate And Respiratory Waveform Must Be Monitored By Pulse Wave. Trends: Trend Data For All Parameters In Tabular And Graphic Formats Must Be: 180h. Stored Nibp Measurements Must Be: Up To 2400 Groups. Stored Alarm Events Must Be: 3000 Groups And Associated Waveform. Holographic Waveform Must Be 72 Hours. Printer/recorder: Must Support 3-channel Recorder To Realize Thermal Printing; Support Network Printing Function. Network Capability: The Ip Address Of Each Patient Monitor Shall Be User Configurable. Features: -the Monitor Must Provide Electronic Early Warning Scor （ews, Glasgow Coma Scale (gcs), And Oxycrg Screen. -oxycrg Screen Shows Two Trend Curves And A Compression Waveform, Support To Review 48 Hours Trend Curve And Compression Waveform On The Oxycrg Review Screen. -accessories Storage Box, Help Manage Accessories And Prevent Accessories Missing Or Broken Problem. -user Shall Be Able To Freeze The Waveforms On The Screen And Then Review It To Carefully Observe The Patient During This Time. -up To 4 Timers Shall Be Able To Be Configured On Monitor Display To Count Up Or Down The Required Time In Minute And Second With Audio Alarm To Alert User. - The Monitor Shall Provide Following Specific Working Modes: Standby, Intubation, Night, Privacy, And Demo Modes. Accessories Included: 3/5 Lead Ecg Cable, 3/5 Lead Ecg Lead Wires, Adult Spo2 Sensor, Pediatric Spo2 Sensor, Temperature Probe Skin, Temperature Probe Oral/rectal, Nibp Cuff Adult, Nibp Cuff Pedia, Wall Mount / Trolley, One (1) Unit Pediatric Anesthesia Circuit With 1l Bag, Two (2) Units Power Adapter. Includes Avr Machine For Anesthesia Machine. Warranty -2 Years From Delivery, Installation, And Training/orientation. Unit 1 3,300,000.00 11 Cardiac Monitor With Capnograph. Brand New. Product Specifications: Display/waveforms: Screen Size Display: Not Less Than 12" Color Tft Screen. Screen Navigation: Touch Screen With Quickly Volume And Brightness Adjustment By Gestures Operate. Support Quick Key, Can Easily And Quickly Access Some Functions Or Perform Operations. No. Of Waveforms: At Least 7 Waveforms (using Standard Screen Display). Size Must Be: At Least 175mm X 320mm X262mm. With Auto Speech Recognition Module Implements The Voice Interaction With The Patient Monitor. Battery: Internal Battery Duration Must Be: ≥ At Least 240 (built In Battery). Can Up-grade Lithium Battery Power Supply ≥480min. Ecg: 5 Leads Display Sensitivity: ×0.25, ×0.5, ×1, ×2, ×4, Auto Gain. Must Have A Smart Lead Off Feature, Must Have An Ecg Calibration Feature, Must Have An St Segment Analysis And Monitoring. Heart Rate Range Must Be: Adu: 15 To 300 Bpm, Ped/neo: 10 To 350 Bpm. Must Have Two (2) Hr Averaging Method. With Ecg Multi-lead Synchronous Analysis Function, Analysis Of Multiple Cardiac Leads At The Same Time, Can Be Accurately Monitored In The Case Of Individual Lead Interference, With Intelligent Lead Fall Monitoring Function. St-segment Analysis Can Show The St Graphic, Which Help Indicates The St Alarm Status More Faster. Nibp: Nibp Measurements Must Comply With The American. National Standard For Electronic Or Automated. Sphygmomanometers: - (ansi/aami/iso 81060-2:2009, Ansi/aami. Sp10:2002) In Relation To Mean Error And Standard Deviation. Measurement Mode： Manual，auto, Stat, And Sequence，sequence Mode Could Support 5 Different Modes. Maximum Measuring Interval In Auto Mode Must. Must Have A Dual Overpressure Protection For Nibp. Temperature: Must Have Dual-channel Body Temperature Monitoring With Difference Display Measurements. Must Support Skin Or Oral If More Than One Temperature Probe Is Used, The Monitor Will Be Capable Of Calculating And Displaying A Delta Reading. Measuring Range: 0～50 ℃. Spo2: Must Be Used In Low Pi (perfusion Index). Resp: Detection Method: Respiratory Rate And Respiratory Waveform Must Be Monitored By Pulse Wave. Ibp: Support 2-channel Ibp Measurement Range: -50mmhg～+350mmhg. Types Of Measuring Blood Vessels: Arterial Pressure (art), Pulmonary Artery Pressure (pa), Central Venous Pressure (cvp), Right Atrial Pressure (rap), Left Atrial Pressure (lap), Intracranial Pressure (icp); Pulmonary Artery Wedge Pressure (pawp); Cerebral Perfusion Pressure (cpp). The Monitor Will Calculate The Ppv Based On Any Arterial Pressure Value Between Heartbeats. Etco2: Measuring Range: Etco 2 0 To 150 Mmhg. Fico: 3 To 50 Mmhg. Awrr: 0 To 150 Rpm (mainstream). Trends: Trend Data For All Parameters In Tabular And Graphic Formats Must Be: 180h. Stored Nibp Measurements Must Be: Up To 2400 Groups. Stored Alarm Events Must Be: 3000 Groups And Associated Waveform. Holographic Waveform Must Be 72 Hours Printer/recorder: Must Support 3-channel Recorder To Realize Thermal Printing; Support Network Printing Function Network Capability: The Ip Address Of Each Patient Monitor Shall Be User Configurable. The Upper/lower Limits Of Alarms Can Be Configured Via Networking From The Central. The Alarms At Bedside Can Be Paused Or Muted Via Networking From The Central. Features: -the Monitor Must Provide Electronic Early Warning Scor （ews）, Glasgow Coma Scale (gcs ), And Oxycrg Screen. -oxycrg Screen Shows Two Trend Curves And A Compression Waveform, Support To Review 48 Hours Trend Curve And Compression Waveform On The Oxycrg Review Screen -accessories Storage Box, Help Manage Accessories And Prevent Accessories Missing Or Broken Problem -all-in-one Monitoring Adult, Children, And Newborn Patients. -user Shall Be Able To Freeze The Waveforms On The Screen And Then Review It To Carefully Observe The Patient During This Time. -up To 4 Timers Shall Be Able To Be Configured On Monitor Display To Count Up Or Down The Required Time In Minute And Second With Audio Alarm To Alert User. - The Monitor Shall Provide Following Specific Working Modes: Standby, Intubation, Night, Privacy, And Demo Modes. Warranty -1 Year From Delivery And Installation. Unit 2 500,000.00 12 Ceasarian Instrument Set. Brand New. Product Specifications: Made Of Heavy Duty Stainless Steel. Includes The Following Items: 1 Pc. Scalpel Handle #3 With Measure 125mm, 1 Pc. Scalpel Handle #4 135mm, 1 Pc. Tc Metzenbaum Scissors Cvd 180mm, 1 Pc. Lexer Scissors Narr Str 165mm, 1 Pc. Mayo-lexer Scissors Cvd 165mm, 1 Pc. Lister Bandage Scissors Hvy 180mm, 1 Pc. Standard Forceps Serr 160mm, 1 Pc. Standard Tissue Forceps 1x2 160mm, 5 Pcs. Lorna Towel Clamp Non-perf 130mm, 6 Pcs. Halsted-mosquito Forceps Delstr125mm, 6 Pcs. Halsted-mosquito Forceps Del Cvd125mm, 2 Pcs. Kelly Forceps Del Str 140mm, 6 Pcs Moynihan Hemostatic Forceps, Crv, 150mm, 1 Pc. Tc Mayo-hegar Ndlholderhvyserr150mm, 1 Pc. Tc Hegar Needle Holder Hvy-serr 205mm, 1 Pc. Us-army Retrac.26x15/43x15-23x15/40x15, 1 Pc. Richardson-eastman Bt471rbt472r, 6 Pcs. Boys-allis Forceps 5x6 155mm, 2 Pcs. Kidney Tray Stainless Steel 250mm, 1 Pc. Bottom For 3/4 Container Height:135 Mm, 1 Pc. Primeline Pro 3/4 Lid Red, 1 Pc. 3/4 Size Perf Basket 406x253x76mm, 1 Pc. Silicone Basket Liner 3/4 Size, 1 Pc.mayo Safety Pin F/ring-hdl Inst 140mm, 1 Pc. Ident. Label Up To 13 Letters Red. Warranty –at Least Eat 1 Year From Delivery. Set 2 1,520,000.00 13 Chemical Analyzer. Brand New. Product Specifications: Combined Instrument With Two Complementary Technologies: Raman Spectroscopy And Colorimetric Detection Confirmatory Testing: One Instrument Capable Of Confirmatory Testing Using Two Technologies Including 1) Swgdrug Category A Technique For Presumptive Testing, And 2) Swgdrug Category C Technique For Confirmatory Testing Safety Of Features For Measuring Energetic Samples: Trace Detection Testing For Energetics Without Need For Opening The Container Nor Inducing Laser Light To The Sample, Scan Delay Timer: 15 Sec – 10 Min Sample Size: Able To Detect / Identify Samples From 1 Microgram Traces To Large Bulk Samples Materials Covered: Common Raman Substances, Explosives, Narcotics, Cwas, Tics, Tims, Precursors, Common Chemicals, Fluorescent Materials Not Covered By 785nm Raman: E.g. Colored Materials, Heroin, Colored Mdma Pills, Oils, Npss, Etc., Low Concentration Materials Not Covered By Any Raman Instruments: Lsd, Thc, Magic Mushrooms, Gunpowder, Etc. Raman Excitation Wavelength: 1064nm Minimizes Fluorescence Effects: Allows For Direct Analysis Of Colored/impure Chemicals Through Colored Packaging. Spectral Wavelength Range 200 – 2500 Cm-1 Portability Power: Small Handheld Device, Optimized For One Handed Operation. , 18.5cm-20cm (l) X 15cm-20cm (w) X 7.9cm-10cm (h), 3.65lbs-5lbs (1.65 Kg-2.27kg)., Quantity 2 Lithium Ion Rechargeable Batteries With Battery Life Of More Than 6 Hours Per Charge Per Battery. Cr123a Rechargable Batteries Can Be Used. Including Spare 2 Lithium-ion Battery. Ruggedness Decontamination: Us Mil-std 810g Designed Rugged., Ip 68 Rated For Use In Varying Environmental Conditions And For Complete Decontamination. Operational Temperature Range: Unit Can Be Operated In -20°c To +50°c Temperatures., Withstands Temperature Fluctuations And Humidity Fluctuations. Rapid Start-up Rapid Results: 60 Seconds From Power On To Analysis., Analysis Results In Less Than One Minute. Operational Mode Options: Raman Analysis And Colorimetric Analysis Oraman: • Auto-collect Adjusts Raman Settings Automatically Optimizes Use For Routine Operations • Advanced User Adjustable Raman Settings For Advanced Operators And Custom Library Build: • Laser Power Level 30-490 Mw Adjustable In 5 Mw Increments Exposure Time 5ms To 30s In Increments • Custom Applications Optimize Raman Analysis Parameters Specific To Material Type Ocolorimetrics: • Pouches Including Both Swipes And Colorimetric Chemicals In One Pouch • Pouches For Explosives And Narcotics • General Pouches For Detecting A Wide Range Of Explosives Or Narcotics • Specific Pouches For One Explosive/narcotic Substance Or Substance Group Easy Raman Operation: • Scans In Direct Contact And Through Translucent Plastic Or Glass Containers. • Universal Sample Holder For Analysis Of Samples In Varying Forms And Packaging. • Smartphone Like Touch-screen Interface Or Large Button Activation. • User Prompted Step-by-step Onscreen Analysis Activation. • Typically, 4 Button Presses To Receive Analysis Result. • Onboard System Status Monitoring And Calibration. Reduces Down-time And Necessity For Re-calibration At A Service Depot Analytical Performance: • Liquids, Solids, Powders, Pastes, Gels, Invisible Traces. • Colored Substances And Substances Found In Colored Translucent Packaging. These Types Of Substances Are Most Often Encountered In Real-world Samples. • Comparative Spectral Analysis Overlay Easily Performed Onboard. • User Adjustable Focus Ensures Analysis Of Material And Not The Packaging. • 4c Software Automatically Monitors Results For Combinations Of Precursors Used In Threat, Drug Manufacturing, And Other Recipes. Users Receive Onscreen Alert To Potential Threat Or Clandestine Drug Manufacturing Activity. Library: Raman: • Over 12,000 Substances. • Resq Library Includes The Latest Explosives, Precursors, Cwas, Tics/tims, Narcotics And Psychotropic Drugs, Steroids, Cutting Agents, Pharmaceuticals, Diluents And Pesticides. • Easily Expandable To Add Emerging Threats And Other Substances. • Fleet Management And Library Transfer To Units In The Field. • 4c Library With Explosive, Drug Manufacturing And Other Types Of Threat Manufacturing Recipes. • Library Updates Provided More Than Once A Year Colorimetrics: • General Narcotics Pouches: Multi Drug Test Incl. Fentanyl, Special Opiate Pouch, Cannabinoids • General Explosives Pouches: Chlorates/perchlorates, General Explosives • Specific Pouches: Cocaine, Ephedrine, Heroin, Ketamine, Lsd, Meth/mdma, Mushrooms, Opiates, Pcp, Thc, Ghb Evidence Documentation Traceability: • Onboard 5mp Camera Captures Image Of Sample And Surroundings, As Well As Colorimetric Swab. • Image(s) Stored Along With Analysis Results In Tamper-resistant File. All Analysis Results Are Traceable And Include Unique Date, Time And Serial Number Stamp. • Ability To Activate Password Protect Operator Log-in. Record Of User Associated Activity Stored Onboard And Cannot Be Deleted. Data Access And Transfer Reporting: • View Results In Real Time On Cell Phone Or Tablet, Computer Or Laptop (pc, Ios, Android, Linux) Via Wifi (can Be Disabled). • Exportable Data In Numerous File Formats. • Data Access And Transfer On Computer Or Laptop Via Usb And Wifi (can Be Disabled). • Easy Report Generation. Customer Support Package: • 24/7/ 365 Days Reachback Service For The Life Of The Unit. • Library Updates Provided For The Life Of The Unit. • Software Updates Provided For The Life Of The Unit. • Support: Online, Phone, Email, And In Some Cases Text Message For The Life Of The Unit Cql Complete Package: • Rugged Shipping Case With Custom Foam Insert. • Qty 2 Rechargeable Lithium-ion Batteries. • Cr123a Battery Cartridge (does Not Include Cr123a Batteries). • External Battery Charger. • Ac Power Supply. • Adjustable Base Adaptor. • Universal Sample Holder. • Certified Benzonitrile Performance Verification And Calibration Standard. • Flash Drive Containing User Manual And Supporting Documentation. • Quick Start Guide. • Usb-c To Usb-a Data Transfer Cable. • 1064nm Laser Test Card. • Including Hand Strap And Wrist Strap. . Training: • Comprehensive Onsite Training For An Unlimited Number Of Users. Add-on Accessories And Software: • Periscope Adaptor. • Vial Holder. • Bottle Adaptor. • Integrated Quickdetect Automated Colorimetrics • Detect Trace Quantities Of Non-visible Residues Left On Surfaces: • Explosives And Explosive Precursors • Narcotics Standard Requirements: • Bidder’s Certificate That Will Provide Manual In English Language (2 Copies Of Operator's/user's Manual And 2 Copies Of Service/technical And Maintenance Manual) Upon Delivery. • Brochure/sales Literature. Training Requirements: • Bidder’s Certificate That Will Conduct Free Technical Training And Product Demo For The End-user/s And In-house Biomed On Equipment Operation And On Maintenance Of Equipment. • After Sales Service: Bidder’s Certificate That Parts Shall Be Available At The Authorized Philippine Service Center/s For A Period Of Five (5) Years After The Warranty Period. • Certification From Local Distributor On The Availability Of Service Technicians And/or Biomedical Engineers In Case Of Equipment Breakdown. Preventive Maintenance - • Bidder’s Certificate Free Quarterly Preventive Maintenance During The Warranty Period With Preventive Maintenance Plan. Warranty Certificate: • Warranty Certificate Minimum Of Five (5) Years For Service And Three (3) Years For Parts. The Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Testing And Commissioning. • Calibration: With Certificate Of Calibration Upon Delivery. The Bidder Must Be Iso 9001 And The Manufacturer Should Be Iso 13485 Certified Unit 1 6,900,000.00 14 Common Bile Duct Exploration Supplement Set. Brand New. Product Specifications: Made Of Heavy Duty Stainless Steel. Includes The Following Items: 1 Pc. Randall Kidney-stone Frcpsslt-cvd225mm, 1 Pc. Randall Kidney-stone Forceps Cvd225mm, 1 Pc. Randall Kidney-stone Frcpshvy-cvd225mm, 1 Pc. Randall Kidney-stone Frcps U-cvd225mm, 1 Pc. Bakes Bile-duct Dilator 1mm, Bakes Bile-duct Dilator 2mm, 1 Pc. Bakes Bile-duct Dilator 3mm, 1 Pc. Bakes Bile-duct Dilator 4mm, 1 Pc. Bakes Bile-duct Dilator 5mm, 1 Pc. Bakes Bile-duct Dilator 6mm, 1 Pc. Bakes Bile-duct Dilator 7mm, 1 Pc. Bakes Bile-duct Dilator 8mm, 1 Pc. Bakes Bile-duct Dilator 9mm, 1 Pc. Bakes Bile-duct Dilator 1mm, 1 Pc. Randall Kidney-stone Forcepscvd190mm, 1 Pc. Randall Kidney-stone Fcpshvy-cvd190mm, 1 Pc. Bottom For 1/2 Container Height:135mm, 1 Pc. Prime Line Pro 1/2 Lid Green, 1 Pc. 1/2 Size Perf Basket 243x253x76mm, 1 Pc. Identification Label Green. Set 1 590,000.00 15 Defibrillator. Brand New. Product Specifications: General Features: 7-10 Inch Lcd Display, Maximum Of 3 Waveforms. High Contrast Display Mode For Bright Environments. Ambulance-ready, Rugged Casting: Ip44, Impact Test Of 0.75m. Output Energy: 1-360j. Charge Times Of <3s T O200j, <7s To 360j. Auto-volt With Smart Charging. Lithium-ion Battery Supports To 6 Hours Monitoring/200 Shocks @360j/ 4.5 Hours Pacing, With Built-in Led Power Level Indicator. Lightweight At 4-5kg., Full Configuration, Main Unit. Automatically Switch Defibrillator Energy, Cpr Prompts, And Alarm Limits Depending On Patient Type. Display Ecg During Aed Mode. Ecg Recovery Within 2.5s Or Less. Contact Status Can Be Checked Through Paddle And Monitor, Impedance Value Can Be Checked In Monitor. Auto-testing Includes Maximum Energy Discharge Test. Parameters: 3/5 Lead Ecg, Pacer. Includes: Thermal Recorder, External Paddle Kits, Ecg Cable And Lead Wires, Ecg Electrode, Multifunction Electrode Pad. Printer Paper, Electrode Gel, Power Cord, Lithium-ion Battery. Unit 5 1,500,000.00 16 Dish Sterilizer. Brand New. Product Specifications: − High Light Led Display, − With Special Boiler Temperature Drainage Settings, − Washing (non-recycling) Parameters Can Be Set Free And With Control Memory Function, − Can Meet Different Washing Demand, − Self - Research Internal Water Softener, − Double Construction Design For Top Cover, − Power: 380v/50hz, − Basket Dimension : 500x500mm, − Washing Ability : At Least 60 Basket / H, − Rinse Water Quantity : 3 L/h, − Inlet Height :400-430mm, − Machine Dimension : 800-850x800-820x1450-1500mm, − Rated Power : 14.75kw, − Gross Weight : 140-150, − Net Weight : 100-110, − Packing Size : 890-900x900-910x1630-1700mm. Warranty Period- Within 1 Year Upon Delivery And Installation To Cover Parts (excluding Wearable Parts) And Service With Preventive Maintenance Every 6 Months Within 2 Years Period. Provides Orientation And Training To End-user Representative.* Unit 1 500,000.00 17 Electrocardiography Machine (ecg) Brand New. Product Specifications. High Resolution Lcd Touch Screen, 320-330x240-250vivid Waveform Display. 12 Leads Ecg Resolution Thermal Printer. Built-in Rechargeable Li-ion Battery, Ac/dc Power Supply. Anti-defibrillator And Pace Maker Detection. Complete Digital Filtering, Resisting Baseline Drift, Automatic Baseline Adjustment. Automatic Ecg Measurement And Interpretation. Large Patient Data Storage; 150 Cases, Equipped With Usb Port For Data Transfer. Three (30 Printing Formats (auto, Manual And Rhythm) Selectable. 1/2/3 Channel Ecg Waveform And Rhythm Leads Record Out. Lead Status Diagram Display. Unit 4 200,000.00 18 Electrosurgical Dessicator Machine. Brand New. Product Specifications: Use For Removal Of Lesions, Warts, Skin Tags, And Other Blemishes Easily With Minimally-invasive Treatment. For Superficial Treatments, Safe To Use Around The Eye And Nose Area. Includes Re-usable Pen And Tips. Unit Specifications: Depth:4-5 Inches, Width:8-9 Inches, Height:7-8 Inches, Weight:6-8 Pounds, Output Power -low At 0-20watts (1/10 Watt Increments Up To 10 Watts), High At 0-35 Watts, Bipolar: 0-35 Watts. Offers Hand-or-foot Activated Operation. Autoclavable, Reusable Hand Control Pencil With Power Adjustment Buttons. Pencils Are Designed With Non-spinning Hex Collar For Multi-positional Fall-safe Blade Locking. Equipped With Mobile Stand. Includes Consumables.warranty-6 Months From Delivery And Installation. Set 1 100,000.00 19 Fetal Maternal Monitoring System: Brand New. Product Specifications: Foldable Screen. Probe Rack And Wall Mounting Rack. Handle For Easy Carrying. User-friendly Gui With 3 Display Modes. Four (4) Optional Color Background. Capable Of 24 Hours Ctg Storage. Fast Print For Store Traces. "smart Notes" Annotation. Signals Overlap Verification. Real-time And Offline Data Transmission To Pc. 10-12 Inch Color Touch Screen. Excellent Algorithm. 12-crystal And 1 Mhz Water-proof Transducer For Accurate Detection. Configuration: Dual-fhr, Toco, Fm, Afm, Mecg, Nibp, Mspo2, Temp. Includes: 3 Each Belt, 1 Each Event Marker, 1 Bottle Ultrasound Gel, 1 Ea. Fhr Transducer, Purple, 1 Each Transducer, Yellow, 1 Each Spo2 Sensor, Adult, 1 Each Temperature Probe, Skin, 1 Each Toco Probe, 1 Each Nibp Cuff, Adult, 1 Each Nibp Tube, Adult. Unit 3 1,110,000.00 20 Infusion Pump. Brand New. Product Specifications: Mechanism: Peristaltic Pump, Operating Mode: Flow Rate Mode, Drip Rate Mode(optional), Preset Volume: 1-9999 Ml, Flow Rate Range: 1 – 600 Ml/h, Increment: 1, 10, 100 (ml/h), Accuracy: ± 5%, Kvo Rate: 1 Ml/h, Bolus Rate: 600 Ml/h, Drop Rate Range: 1 – 400 Drop/min With Optional Drip Sensor, Screen: 2.7 Inches B/w Lcd, Information: Flow Rate, Preset Volume, Accumulated Infusion Volume, Completion, Occlusion, Air Bubble, Bed No, Ac Power Indicator, Battery Capacity, Battery Charge Indicator, Iv Set, Etc., Status Indicator: Stop, Run, Bolus, Kvo, Alarm Type: Air Bubble, Finish, Occlusion, No Ac Power, Low Battery, Battery Empty, Reminder To Operate, Communication Error (err1), Operation Error (err2), Drops Error (err3), Handle Open (err4), Air Bubble Level: 1-3 Levels Adjustable, Universal Compatibility, Turn On/off, Occlusion Alarm Pressure Range: 3 Levels: 60kpa, 100kpa, 140kpa (±20kpa), Battery Type: Lithium Polymer, Battery Life: Up To 4 Hours Continuous Operation 25 Ml/h Flow Rate, With Delivery And Installation, Provision Of Trainings Of Staff With Certificates, And Manual. Unit 4 320,000.00 21 Laboratory Oven. Brand New. Product Specifications: Working Temperature Range At Least 5 Above Ambient Temperature To +300 °c; Setting Accuracy Temperature Up To 99.9 °c: 0.1 / From 100 °c: 0.5; Setting Temperature Range +20 To +300°c; Temperature Sensor 1 Pt100 Sensor Din Class A In 4-wire-circuit. Control Cockpit Single Display. Adaptive Multifunctional Digital Pid-microprocessor Controller With High-definition Tft-colour Display; Timer Digital Backwards Counter With Target Time Setting, Adjustable From 1 Minute To 99 Days; Adjustable Parameters: Temperature (celsius Or Fahrenheit), Air Flap Position, Programme Time; Ventilation: Natural Convection, Vent Connection With Restrictor Flap; Works Calibration Certificate : Calibration At +160°c; Door Fully Insulated Stainless Steel Door With 2-point Locking (compression Door Lock); Internals 1 Stainless Steel Grid(s), Electro Polished; Stainless Steel Interior; Interior Easy-to-clean Interior, Made Of Stainless Steel, Reinforced By Deep Drawn Ribbing With Integrated And Protected Large-area Heating On Four Sides; Volume 32 L; Dimensions W(a) X H(b) X D(c): 400 X 320 X 250 Mm; Max. Number Of Internals: 3; Max. Loading Of Chamber 60 Kg; Max. Loading Per Internal 20 Kg; With Free Power Back-up System, With Free Installation And Demonstration. Unit 1 130,000.00 22 Newborn Hearing Screening Test Equipment. Brand New. Product Specifications: • Capable Of Screening And Diagnostic Testing With Te And / Or Dpoae. • Fast Automatic Test With Pass / Refer And Graphical Test Result Display. • Direct Evaluation Via Value And Bar Diagram. • Up To 12 Frequencies Displayed Within The Device, Dp Up To 12 Khz. • 5 Dp / 2 Te Protocols With User Customizable Parameters (diagnostic Version). • High Noise Immunity For Operation In Normal Clinical Environment. • Lightweight, Small Ear Probe. • Environmentally Friendly Due To Long Life, Rechargeable Battery. • Bluetooth Communication To Optional Printer And Pc • Evaluation Of Results In Pc. Screener With At Least 4 Frequency Dpoae Testing Protocols. • Qualified Protocols Built Into The Device. • 4 Dpoae Test Frequencies Reported. • Integration To State Tracking Systems, Hi-track Or Oz. Diagnostic With Up To 12 Frequency Dpoae Testing Protocols. • 1.5 To 12 Khz Frequency Range With Up To 12 Test Frequencies Reported. • Customizable Test Protocols Teoae Available As An Upgradeable Option. Measurement Type: Distortion Product Otoacoustic Emissions (dpoae) Transient Evoked Otoacoustic Emissions (teoae). Frequency Range: Screener Version: Dpoae: 2.0 Khz To 5.0 Khz Teoae: 1.5 Khz To 4.0 Khz. Diagnostic Version: Dpoae: 1.5 Khz To 12.0 Khz Teoae: 0.7 Khz To 4.0 Khz. Stimulus Intensity Range: Dpoae: 40 Db Spl To 70 Db Spl Teoae: 83 Db Spl Peak Equivalent (±3 Db). Microphone System Noise: -20 Db Spl @ 2 Khz (1 Hz Bandwidth)/ -13 Db Spl @ 1 Khz (1 Hz Bandwidth). Dimensions And Weight (unit): 2.5 To 3” W X 1.2 To 1.8” D X 5.5 To 6.5” H 6.2 To 6.8 Oz. Power Supply: Lithium-ion Rechargeable. Battery Life: 1000 Tests Per Charge, Minimum 15 Hours On-time. Connectors/ Communications: Integrated Usb Communication Capability For Battery Charging And Communication With Pc-based Database Programs Or An Optional Printer. Hdmi Connector For Connection To The Micro-probe. Integrated Bluetooth Class 2 + Edr With Spp. Protocol For Communication With Optional Printer. Standard Accessories: Micro-probe, Box Of Single Use Ear Tip And Ear Tip Remover, Package Of Probe Tubes, Micro-usb Power Supply For Charging Lithium Ion-battery, Pc Database Software With Manual, Micro B To A Usb Cable For Pc Communicator/charging, Protective Carrying Case, Data Management Tool That Provides The Ability To Transfer Patient. Oae Test Data From The Testing Device To A Pc For The Purposes Of Viewing, Archiving, Managing And Printing Oae Reports. Using The Database Also Gives You The Means To Create Letter Sized, Detailed Reports That Can Be Easily Filed Or Faxed. You Can Also Create A “paperless” Office By Saving The Test Results As A Pdf For Electronic Filing Or Email. Dpoae: 40 Db Spl To 70 Db Spl Teoae: 83 Db Spl Peak Equivalent (±3 Db). Includes Ups. Warranty –at Least 1 Year After Delivery And Installation. Unit 1 1,000,000.00 23 Operating Room Lights. Brand New. Product Specifications: Dual Head- Ceiling Type. Major Operating Room Light Multi-color. Merging Of Light Fields, Light Intensity Control. Comfortable Display Of Key-pad On Major Lighting Head. Back Light Key Pad Display. Depth And Merging Light Field Should Be Operated At The Sterilizable Handle. Cool Light Temperature Increasing In Head Area: 0.5 ºc. 360° Continuous Rotation Around All Major Joints. Anti-bacterial Coating Head. - Light Head Diameter: 66cm. Ideal Laminar Flow Ceiling System. With Endo Mode: Must Be Color Green Light. Main Light Head. Electronic Light Intensity Control At Lamp Head. - Light Intensity At 1 Meter Distance: 160,000 Lux. Colour Rendering Index Ra At Kelvin: 98 (for Better Quality Image Of Skin, Blood And Tissues). Colour Rendering Index R9 At Kelvin: 99 (for Better Quality Image Of Skin, Blood And Tissues). Focusable Light Field Size: 19-30 Cm. Colour Temperature: 3,750, 4,000, 4,250, 4,500, 4,750 K. - Adjusting The Shadow Activating Via The Touch Panel. - Maximum Of Four Groups Of Lenses Are Dimmed Simultaneously. Shadow Management System. Number Of Led’s: 99 On Lamp Head. Life Span Of Leds: > 60,000 H. Working Distance: 70-160 Cm. Light Intensity Control (standard): 5% - 100%. Outstanding Depth Illumination: 70, 100, 130 Cm. Laser Pointer On Head (main Light Head Only). Lf-index Leenemann: 26. Lf-index Oostlander: 28. Input Voltage: Single Phase 110 ~ 230 Vac Free Volt. Total Power Consumption: 82 - 92watts. Adjustable Brakes At The Horizontal Arm. Light Head Weights: 18.5 Kg. Protection Type Lamp Head: Iec60529. - Aluminum Housing. Satellite Head. Electronic Light Intensity Control At Lamp Head. - Light Intensity At 1 Meter Distance: 140,000 Lux. Colour Rendering Index Ra At Kelvin: 98 (for Better Quality Image Of Skin, Blood And Tissues). Colour Rendering Index R9 At Kelvin: 99 (for Better Quality Image Of Skin, Blood And Tissues). Focusable Light Field Size: 18-30 Cm. Colour Temperature: 3,750, 4,000, 4,250, 4,500, 4,750 K. Number Of Led’s: 69 On Lamp Head. Life Span Of Leds: > 60,000 H. Working Distance: 70-160 Cm. Light Intensity Control (standard): 5% - 100%. Outstanding Depth Illumination: 70, 100, 130 Cm. Input Voltage: Single Phase 110 ~ 230 Vac Free Volt. Total Power Consumption: 82-92 Watts. Adjustable Brakes At The Horizontal Arm. Light Head Weights: 17.9 Kg Minimum. - Aluminum Housing. Protection Type Lamp Head: Iec60529. Standard Accessories: - Sterilized Handle: 2 Pcs/ Lamp Head, - Ceiling Anchorage Ring With Screws, - Spring Arm, - Ceiling Cover, Including Installation Of Brackets To Embed Overhead Ceiling- User Manual, - Ups. Warranty Of Two (2) Years For Parts And Labor With Free Preventive Maintenance Every Quarter Within Warranty Period Five (5) Years Warranty For Led Bulb Only. Unit 1 2,500,000.00 24 Operating Room Table (motorized). Brand New. Product Specifications: Total Length: 2000-2100 Mm. Width Including Side Rails: 600-630 Mm. Mattress Width: 550-570 Mm. Total Weight: 200-210 Kg. Safe Working Load (swl): Up To 250 Kg. Height Adjustment Range: From 595 Up To 1005 Mm. Castors: Four Ø 120-125 Mm Central Locking Twin Castors. Head Section: -58° ... +37°, 135 Mm. Back Section: -10° ... +70°. Leg Section: -80° ... +10°. Lateral Tilt: 20° / 20°. Trendelenburg/anti-trendelenburg: 30° / 20°. Sliding Tabletop For C-arm Function: 300-320 Mm. Flex / Reflex: 220° / 120°. Electrical System: 24 Vdc, Battery Operated, 100 - 240 Vac, 50/60 Hz. Controls: Hand Control And Integrated Control Panel On The Column. Memory Positions: Four Programmable Positions. Visco-elastic Mattresses. Radio Lucent Tabletop For X-ray. Accessories For General Surgery: 1. Arm Rest, 2. Anesthesia Frame With Clamp And, 3. Attachment Clamp. Transport And Storage Conditions: Temperature 7 10° C + 50° C. Relative Humidity 10 %, 85 %. Air Pressure 700 Hpa, 1060 Hpa. Operating Condition: Temperature +10° C, + 40° C. Relative Humidity 30 %, 75 %. Air Pressure 700 Hpa 1060 Hpa. Side Rail Accessories: 25 X 10mm. Warranty-1 Year From Delivery And Installation. Certificate Of Parts Available In The Next 5 Years. Includes Training To End-user. Includes Product Manual. Unit 2 5,500,000.00 25 Radiant Warmer With Phototherapy Units. Brand New. Product Specifications: Fixed Height Radiant Warmer, Mounted On A Column. The Unit Is Supported By A T-shaped Sturdy And Stable Wheeled Base. Bases Is Provided With A Minimum Three (3) Anti-static Swivel Casters. At Least Two (2) Of The Casters Are Equipped With Brakes. The Base Is Equipped With A Side Handle/rail For Easy Positioning. The Design Of The Base Is Suitable To Be Fitted Over Standard Cradles, Cribs, And Bassinets. Overhead Radiant Heater At A Fixed Height Of 1.80-2.0m. Radiant Heating Is Achieved By Quartz/ceramic Elements, Placed In A Parabolic Reflector. The Radiator Is Equipped With A Safety Grid. The Unit Support Three (3) Modes: Pre-heating, Manual And Servo Mode. The Unit Allows For Instant Switching Been The Different Operating Modes. The Minimum Skin Temperature Setting Range Is 32°c To 37°c. The Resolution Of The Temperature Is: ± 0.5°c Or Better. In Manual And Pre-heating Modes Heating Settings Allow For A Range Of 0 – 100%. Led Spotlight(s) For Examination Are Integrated In The Overhead Radiant Heater, The Angle Of The Overhead Light Is Adjustable. Warm-up Time < 30 Min To 25°c. Power Requirements: 1 Ph, 100 - 240 Volts - 50/60 Hz 900 To 1300va (with Ups And Avr). Display Features: The Display Panel Is Integrated In The Column For Visualizing Working Parameters And Alarms. The Display Indicates: - The Current Active Mode: Pre-heating, Manual Or Servo, - The Current Heating Power In Percentages, - The Current Pre-set Temperature, - The Current Actual Skin Temperature, - The Current Air Temperature. The Unit Is Equipped With A Self-check Feature. Alarm And Safety Features: Alarms Are Audible And Visible. Alarms Indicating: - Sensor Disconnection Or Malfunction. - Power Failure. - Skin Temperature, After Stabilizing, Varying Beyond 0.5° To 1°c From Set-point. - 10 To 15 Minutes After Manual Mode Has Been Engaged An Audible Alarm Will Sound. In Addition, The Unit Will Either Reduce Or Cut The Power To The Heater. In Skin Mode, When The Temperature Exceeds 39°c, The Unit Will Cut The Power To The Heater. Supplied With: Instructions For Assembly, Use And Maintenance In English: 1 X Installed And 2 X Spare Reusable Skin Temperature Sensors, Including Connection Cable And Plug. 1 X Spare Quartz/ceramic Heating Element Or The Same With Installed Heating Element. 2 X Spare Examination Light Bulbs. 1 X Set Of Spare Fuses, If Applicable. Accessories: A Durable Light Weight Cradle/crib And Mattress. Oxygen Regulator Including A Pressure Gauge, Flow Meter, Humidifier Bottle And All Required Tubing. Integrated Weighing Scale. Electrically Operated, Slow Suction Unit Including A Vacuum Regulator, Vacuum Gauge And Autoclavable Collection Jar. Electrical Height Adjustment. T-piece Resuscitator. Integrated Phototherapy Unit. Led Phototherapy Unit 36cm: 620-2800μw/c㎡. Led Phototherapy Unit 50cm: 400-1620μw/c㎡. Estimated Life Span: Eight Years. Includes Avr. Unit 3 600,000.00 26 Refrigerator (biological). Brand New. Product Specifications: External Dimension: W = 700-750 Mm D = 730-750 Mm H = 2000-2100 Mm. Inside Dimension: Useful Space On Top W = 600-620 Mm D = 550-570 Mm H = 500-550 Mm. Useful Space At The Bottom W = 590-610 Mm D = 540-560 Mm H = 500-550 Mm. Capacity: 600 L Temperature Range: Top 2°c To 20°c Bottom 2°c To 20°c. Optional: Other Temperature Ranges. Housing Galvanized Sheet Steel With High Quality White Coating, Antibacterial Coated. With 4 Feet, Height Adjustable. Optional: Set Of 4 Casters, 2 With Brakes. Interior Space Inner Case Of Galvanized Sheet Steel With High Quality White Coating, Antibacterial Coated. Cleaning Friendly By Rounded Corners, Slippery Surface In The Interior, Meets Highest Hygiene Requirements Insulation High Density Foamed-in-place Polyurethane, With A Thickness Of 60 Mm. Cfc-free. Circulation Air Cooling For Rapid And Uniform Temperature Control, Reducing Temperature Gradients To A Minimum. When The Door Is ""open"" The Circulating Fan Is Switched Off Automatically By A Micro Switch In Order To Prevent Warmer Ambient Air Being Drawn In. Door 2 Pcs. Three-layer Thermally Insulating Glass Door (arranged On Above The Other), Supplied As Standard With Right Hand Hinge, Also Available With Left Hand Hinge At No Extra Cost. Grease Resistant Magnetic Seal. Optional: With Door Lock. Interior Fittings 4 Pcs. Grating-type Shelves (dim.: 530x550 Mm), White Coated. Interior Lighting With Automatic On/off Micro Switch. Optional: Stainless Steel Shelves Or Stainless-steel Drawer Compartments, With 3 Lengthwise Dividers With Telescopic-type Guides On Rollers With Stops, Drawer Dimensions: 500x480x77 Mm (wxdxh) Usable With Between The Lengthwise Dividers: 106 Mm (lengthwise Dividers Easily Removable). Working Range 1 From 2°c To 20°c (assuming The Ambient Temperature Is Approximately 4°c Above The Set Point). Temperature Accuracy +/- 1,8°c After Stabilization (with 50% Of Loading). Acoustics Signal When The Set Value Is Undercut Or Exceeded Potential-free Connection Socket For Extern Alarm Refrigerating Unit 2 Pcs. Fully Hermetically Sealed, Forced Ventilation, Fitted On Vibration – Absorbing Mounts (ambient Temperature Max. 32°c), Low Noise (48dba/1m), Energy Saving Compressor With High Quality Vaporization System. Refrigerant: R 290 Or Equivalent Defrost Automatically With Thermal And Time Limit. Condensate Evaporation In Heated Tray. During The Defrost Period, The Temperature Inside The Cabinet (only The Air Temperature – Not The Stored Goods) Will Arise For A Short Time. Electrical Date: Power Supply220-230 V/50 Hz/single Phase Optional: 60 Hz. Power Input 2x 0,20 Kw. Fuse 16a. Power Cable: 2x 1,5 M. Packing Details (palletized) Dimensions: Approx. 85x98x224 Cm. Net Weight: 150-170 Kg. Gross Weight: 180-200 Kg. Include Avr. Unit 1 100,000.00 27 Rigid Video Procto-sigmoidoscope. Brand New. Product Specifications: Plastic Obturator. Video Camera. Stainless Steel Tube. Handle Of Polyacetal (delrin), Usb Male Connector. Analogue To Digital Converter Nozzle For Gas. Instrumentation Channel. Silicone Washer. Includes Universal Fiber Optic Light Source Machine And Tube Connector From The Proctoscope To The Light Source Machine. Warranty -6 Months From Delivery And Installation. Set 1 50,000.00 28 Stretcher, Transport Type. Brand New. Product Specifications: Hydraulic Stretcher. Numbers Of Function: Five-function. Certification: Ce, Fda, Iso13485. Size: 2000-2100 Mm (l)*770-800mm (w)*600-610/900-920mm (h). Height:600mm-930mm. Lowest Position-floor To Platform-580mm. Highest Position-floor To Platform-905mm. Side Rail Height Above Mattress Platform-340 To 360mm. Maximum Back Rest-0-80 Degrees. Maximum Knee Rest-0-30 Degrees. Maximum Trendelenburg Reverse Tr-0-16 Degrees. Mattress Size -1850-1880 X 650-670 X 80-90mm. Loading Capacity -up To 200 Kg. Side Rails: Collapsible Aluminum Alloy Side Rails. Bed Platform: X-ray Transparent. Specification: Ce, Fda, Iso. Other Features: 1. Central Brake System: Equipped With Four Brake Pedals On All Sides Of The Bed Make The Brakes At The Optimal Position Effectively. 2. Multi-function Instrument Support: The Instrument Support Can Put The Monitor And Can Also Be Used As A Headboard To Prevent Accidental Slippage Of The Patient. 3. Push Handle: Reducing The Workload And Preventing The Injuries. 4. High Quality Mattress: The European Standard Waterproof Cloth With The Smooth Surface Of The Mattress, Easy To Clean And Not Misplaced. 5. Large Diameter Wheel: Using The Imported 8-inch Silent Caster Make It Flexible And Durable. 6. The Fifth Wheel: The Fifth Wheel Can Provide A Smaller Radius Of Gyration. The Telescopic Collapse Design Can Slide Smoothly Even On The Rough Surface Or Obstacles Such As The Elevator Sill, Reducing Effectively The Damage Caused By Transport To Patients. 7. Plastic Coated Side Rails: The Side Rails With Stainless Steel Column Guardrail Covers Almost Entire Length Of Bed. 8. High-strength Carbon Steel Structure And Spray Procedure: The High Quality Carbon Steel And Robot Welding Guarantee The Mechanical Strength. The Spray Surface Treatment Is Easy To Clean And Guarantees A Longer Life. 9. Rapid Lifting Hydraulics: The Imported Dual-pressure Lifting System Can Be Used To Quickly Lift The Bed Or The Push Handle For 2 Seconds In An Emergency, And The Bed Will Automatically Locate The Height To Form A Special Body Position Of The Patient. 10. X-ray Imaging: Equipped With X-ray Material Bed Surface And X Ray Cassette Holder, The Whole Body Can Be X-rayed. 11. With Oxygen Cylinder Holder. Warranty -1 Year From Delivery And Installation. Unit 18 5,400,000.00 29 Suction Machine. (heavy Duty). Brand New. Product Specifications: Floor, Standing Type. Oil-less Piston Suction Motor. Double Anti-overflow Protection (mechanical Float And Electronic Sensor). Flow Rate: 40-50 Liter Per Minute. Water Displacement. Vacuum -700-800mmhg. Includes 2x3 Liters Polycarbonate Collection Jar. Attach/detach Abs Plastic Cover Jar. Anti-bacterial And Hydrophobic Filter. Patented Anti-vibration System. Dimensions: 300-400mm X 380-420mm X 800-850mm (lxwxh). Weight -15-25 Kg. Equipped With Foot Switch. Power -250w. Power Requirement -ac 200, 50-60hz. Silicone Hose. Operation And Service Manual Included. Warranty Of 6 Months From Delivery And Installation. Includes Orientation And Training Of End-user Staff. Unit 2 600,000.00 30 Syringe Pump. Brand New. Product Specifications: With Delivery And Installation, Provision Of Trainings Of Staff With Certificates, And Manual.  Applicable Syringes (universal Compatibility To Various Brands): 10ml, 20ml, 30ml, 50ml/60ml, Accuracy: ±2% (mechanical ±1%).  Flow Rate: 10ml: 0.1 Ml/h -300ml/h, 20ml: 0.1 Ml/h -600ml/h, 30ml: 0.1 Ml/h -900ml/h, 50ml: 0.1 Ml/h -1500ml/h.  Bolus Rate: 10ml: 100-300ml/h (default 300ml), 20ml: 100-600ml/h (default 600ml), 30ml: 100-900ml/h (default 900ml), 50ml: 100-1500ml/h (default 1500ml).  Purge Rate: 10ml: 300ml, 20ml: 600ml, 30ml: 900ml, 50 Ml: 1500ml.  Volume To Be Infused: 0.1ml~1000ml.  Injection Increment: 0.1ml.  Infusion Mode: Rate Mode, Time Mode.  Time Mode: Volume Limit: 0.1~999.9ml. Pre-set Time: 1min To 99h99min. Remaining Time: **h **min.  Occlusion Pressure: 3 Adjustable Occlusion Pressure Settings: Low, Middle And High.  Alarm Function: Infusion Completion, Near Completion, Empty, Occlusion, Low Battery, Syringe Disengaged, Incorrect Installation Of Syringe Plunger, No Ac Power Supply, Low Battery, Battery Exhausted, Malfunction Etc.  Battery: Rechargeable Lithium Polymer Battery, 7.4v, 2100mah, Can Operate For More Than 3 Hours After Fully Charged At 25ml/h. Unit 5 300,000.00 Total 34,665,000.00 Note: Winning Bidder Shall Conduct Product Demonstration/end-user’s Training Of The Actual Unit And Issue Training Certificate To The End-user And Medical Equipment Technician Of Wvsgh. The Bidder’s Single Largest Completed Contract Similar To The Contract To Be Bid Should Have Been Completed Within 3 Years From The Date Of The Deadline Of Submission And Receipt Of Bids, Award For This Contract Should Have Been Awarded By A Hospital Or Health Facility And Not By Another Supplier, Except For Line Items With Asterisk (*) Which Have Been Awarded By A Non-health Facility. Likewise, The Contract Price Of The Slcc Should Be At Least 50% Of The Sum Of The Abc Of The Line Items Joined. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184. The Complete Schedule Of Activities Is As Follows: Bac Activities Schedule Availability Of Bidding Documents December 12, 2024 At 8:00 Am To 4:00 Pm And Up To Before 9:00 Am Of January 7, 2025, At The Procurement/bac Office, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Pre Bid Conference December 20, 2024 (thursday), 9:00 Am At The 3rd Floor, Im Conference Room, New Building, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Opening Of Bids January 7, 2025 (tuesday), 9:00 Am At The 3rd Floor, Im Conference Room, New Building, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Bid Documents May Be Acquired By Interested Bidders On The Dates And Address Above And Upon Payment Of Applicable Fee For The Bidding Documents In The Amount Of: Php 25,000.00 Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bac/procurement Office On Or Before 9:00 Am Of January 7, 2025. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Wvs.doh.gov.ph , Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Western Visayas Sanitarium And General Hospital Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Mr. Jasond Rex A. Huyaban/jessie H. Jarbadan Bac Secretariat Western Visayas Sanitarium And General Hospital Sta. Barbara, Iloilo Tel. No.: (033) 332-4778 Loc. 119 Email: Wvsbac.procurement@gmail.com Website: Wvs.doh.gov.ph Renia Grace G. Salapare, Md, Fpafp, Mpa Bac Chairperson

Details: Description Request For Quotations: Please Quote Your Best Offer For The Item/s Described Below, Subject To The Terms And Conditions Provided At The Dorsal Portion Of This Request For Quotation. Submit Your Quotation Duly Signed By You Or Your Duly Representative And Copies Of Eligibility Requirements (business Permit, Local/national Tax Clearance And Philgeps Certificate Of Registration) Not Later Than The Deadline For Submission. Items: Procurement For The Repair & Maintenance Of Transportation Equipment: Motor Vehicles Under The Repair & Maintenance Fund Of The City General Services Office Lot 1- Repair & Maintenance Of Transportation Equipment: Motor Vehicles Item Estimated Quantity Unit Of Issue Item Description Unit Cost Repair And Maintenance Of Transportation Equipment: (motor Vehicle) Ordering Agreement Supply Of Vehicle Parts For Minor Repairs And Maintenance At The Navotas Motorpool -for 4 - Wheel Vehicles 1 50 Pc/s Battery Lug 150.00 2 50 Mtr/s Wire-#10,16,18 290.00 3 50 Pc/s Switches- 2gang,3gang,6gang 950.00 4 50 Pc/s Handle Switch 1,200.00 5 100 Pc/s Oil Seal 950.00 6 100 Pc/s Battery Terminal Ci Brass 260.00 7 50 Pc/s Brake Master 4,700.00 8 100 Pc/s Repair Kit 1,200.00 9 100 Set/s Brake Pads 2,500.00 10 100 Set/s Brake Shoe 3,500.00 11 100 Pc/s Drum Brake 6,900.00 12 100 Pc/s Brake Hose 950.00 13 100 Pc/s Bleeder Valve 1,250.00 14 100 Pc/s Return Spring 950.00 15 150 Pc/s Lug Nuts 95.00 16 150 Pc/s Bolt/nut 65.00 17 300 Pc/s Clips 75.00 18 150 Pc/s Wheel Cap 95.00 19 150 Pc/s Wheel Boot 95.00 20 50 Pc/s Rotor Disk Brake 1,900.00 21 100 Pc/s Headlight Bulb 850.00 22 100 Pc/s Bulb Socket 150.00 23 100 Pc/s Brake Light 250.00 24 100 Pc/s Signal Light Bulb 150.00 25 100 Pc/s Clutch Cable 3,900.00 26 100 Pc/s Gas Cable 2,500.00 27 50 Mtr/s Copper Tube 250.00 28 100 Pc/s Hand Brake Cable 2,500.00 29 50 Pc/s Lever 650.00 30 150 Pc/s Air Filter 1,200.00 31 50 Pc/s Hose-radiator Inlet 3,600.00 32 50 Pc/s Hose-radiator Outlet "b" 3,100.00 33 50 Pc/s Hose-radiator Outlet "c" 3,800.00 34 50 Pc/s Hose-radiator Outlet 1,900.00 35 50 Pc/s Hose-fill Line 1,350.00 36 50 Pc/s Hose-heater 1,315.00 37 100 Pc/s Hose Clamp 95.00 38 50 Pc/s Belt "v" 3,700.00 39 50 Pc/s Ribbed Belt-v 3,400.00 40 100 Pc/s Radiator Hose 1,700.00 41 100 Pc/s Radiator Cap 1,200.00 42 100 Pc/s Fan Belt 1,600.00 43 150 Pc/s Spark Plug 650.00 44 150 Pc/s Spark Plug Terminal 380.00 45 150 Ltr/s Radiator Coolant 550.00 46 100 Pc/s Wheel Hub 1,600.00 47 100 Pc/s Wheel Bearing 750.00 48 50 Pc/s Wheel Cylinder 1,350.00 49 150 Pc/s Seal 350.00 50 30 Box/s Automotive Fuse 5a,10a,15a,20a,25a,30a 350.00 51 50 Assy/s Horn 2,400.00 52 100 Pc/s Relay 950.00 53 150 Ltr/s Gear Oil 375.00 54 150 Pc/s Tire Valve 150.00 55 150 Pc/s Tire Selant 325.00 56 100 Pc/s Throttle Controller 2,450.00 57 100 Pc/s Tube 750.00 58 100 Pc/s Truck Tubes 1,200.00 59 100 Pc/s Flap 550.00 60 150 Ltr/s High Performance Gear Oil 700.00 61 50 Assy/s Clutch Master 3,100.00 62 50 Assy/s Secondary Master 2,500.00 63 50 Set/s Fender Liner 2,500.00 64 50 Pc/s Floor Guard Rubber 3,000.00 65 50 Pc/s Steering Wheel Cover 2,200.00 66 50 Pc/s Side Mirror 1,200.00 67 50 Pc/s Side Mirror Glass Only 350.00 68 50 Pc/s Ignition Switch 2,200.00 For E-trikes & Motorcycles 69 50 Pc/s Battery Lug 150.00 70 50 Mtr/s Wire-#10,16,18 290.00 71 50 Pc/s Switches- 2gang,3gang,6gang 650.00 72 100 Pc/s Oil Seal 350.00 73 100 Pc/s Battery Terminal Ci Brass 100.00 74 50 Pc/s Brake Master 950.00 75 100 Pc/s Repair Kit 1,200.00 76 100 Set/s Brake Pads 850.00 77 100 Set/s Brake Shoe 950.00 78 100 Pc/s Drum Brake 950.00 79 100 Pc/s Brake Hose 650.00 80 150 Pc/s Lug Nuts 95.00 81 150 Pc/s Bolt/nut 65.00 82 150 Pc/s Wheel Cap 95.00 83 150 Pc/s Wheel Boot 95.00 84 50 Pc/s Rotor Disk Brake 1,750.00 85 100 Pc/s Headlight Bulb 250.00 86 100 Pc/s Bulb Socket 150.00 87 100 Pc/s Clutch Cable 550.00 88 100 Pc/s Gas Cable 750.00 89 100 Pc/s Hand Brake Cable 890.00 90 50 Pc/s Lever 650.00 91 150 Pc/s Air Filter 550.00 92 100 Pc/s Hose Clamp 95.00 93 50 Pc/s Belt "v" 1,200.00 94 150 Pc/s Flyball 140.00 95 150 Pc/s Slider 140.00 96 100 Pc/s Pulley 950.00 97 100 Pc/s Radiator Hose 650.00 98 100 Pc/s Radiator Cap 490.00 99 150 Pc/s Spark Plug 650.00 100 150 Pc/s Spark Plug Terminal 650.00 101 5 Pc/s E-cab 1000 Battery Charger 10,500.00 102 10 Pc/s Wiper Motor 2,200.00 103 10 Pc/s Meter Assy. 1,500.00 104 10 Pc/s E-cab Braker 350.00 105 150 Ltr/s Radiator Coolant 550.00 106 100 Pc/s Wheel Hub 1,600.00 107 100 Pc/s Wheel Bearing 750.00 108 50 Pc/s Wheel Cylinder 850.00 109 150 Pc/s Automotive Fuse 65.00 110 50 Assy/s Horn 950.00 111 100 Pc/s Relay 320.00 112 150 Ltr/s Gear Oil 375.00 113 20 Pc/s Breaker 450.00 114 150 Pc/s Tire Valve 150.00 115 150 Pc/s Tire Selant 325.00 116 100 Pc/s Throttle Controller 350.00 117 50 Pc/s Fun350 395.00 118 50 Pc/s Ecargo 375.00 119 100 Pc/s Tube 280.00 120 150 Ltr/s High Performance Gear Oil 700.00 121 50 Assy/s Clutch Master 2,500.00 122 30 Pc/s Side Stand 650.00 123 30 Pc/s Center Stand 1,500.00 124 50 Pc/s Wiper Arm 1,500.00 125 30 Assy/s Exhaust Pipe 2,500.00 126 50 Pc/s Stand Spring 150.00 127 50 Pc/s Side Mirror 450.00 128 50 Pc/s Chain 3,000.00 129 50 Pc/s Front Sprocket 1,450.00 130 50 Pc/s Rear Sprocket 2,800.00 131 50 Set/s Sprocket & Chain Set 6,800.00 -tires 132 10 Pc/s 10.00r20 18,500.00 133 10 Pc/s 11r22.5 17,500.00 134 10 Pc/s 165/80r13 5,400.00 135 30 Pc/s 185/60r15 5,700.00 136 50 Pc/s 185/70r14 6,000.00 137 30 Pc/s 185/70r15 8,600.00 138 30 Pc/s 185/80r14 7,100.00 139 40 Pc/s 185r-14c 6,700.00 140 10 Pc/s 195/70r15c 7,250.00 141 20 Pc/s 195r14c 8ply 7,600.00 142 50 Pc/s 195r15 7,680.00 143 30 Pc/s 205/65r16 8,600.00 144 20 Pc/s 205/85r16 13,100.00 145 50 Pc/s 205/65r15 8,400.00 146 30 Pc/s 215/70r - 16c 9,570.00 147 20 Pc/s 235/75r17.5 15,100.00 148 10 Pc/s 235/70r15 9,900.00 149 10 Pc/s 295/70r17 31,600.00 150 30 Pc/s 7.50/16 14,600.00 151 30 Pc/s 7.00/16 11,100.00 152 20 Pc/s 7.00/15 13,500.00 153 30 Pc/s R(3.25-17) 3,100.00 154 30 Pc/s F(2.75 - 17) 3,000.00 155 30 Pc/s 70-90-14 4,100.00 156 30 Pc/s F(80-90-14) 4,100.00 157 30 Pc/s R(90-90-14) 4,600.00 158 30 Pc/s (100/80r17) 5,800.00 159 30 Pc/s (130/70r17) 8,800.00 160 10 Pc/s (16x2.5-64) 2,700.00 161 30 Pc/s (3.00/10) 2,900.00 162 30 Pc/s (2.50-18) 2,800.00 163 30 Pc/s (2.75-18) 2,850.00 164 30 Pc/s (2.75-17) 2,500.00 165 30 Pc/s (3.75-17) 2,800.00 166 30 Pc/s (3.75 - 12) 2,900.00 167 30 Pc/s (3.50 - 12) 2,750.00 168 30 Pc/s (4.10-18) 3,600.00 169 30 Pc/s (2.75-21) 4,300.00 170 30 Pc/s (80/80-14) 3,800.00 171 30 Pc/s (90/80-14) 4,100.00 172 30 Pc/s 2.75 - 17 2,650.00 173 30 Pc/s 3.00 - 17 2,850.00 -batteries 174 30 Pc/s Mg7l 4,000.00 175 30 Pc/s Yb7bl 2,200.00 176 30 Pc/s Ytx4l 2,200.00 177 30 Pc/s 12n9-4b-1 2,200.00 178 30 Pc/s 2sm 8,600.00 179 50 Pc/s 3sm 9,900.00 180 30 Pc/s 6sm 11,800.00 181 30 Pc/s B24l 8,300.00 182 30 Pc/s Ln3 11,000.00 183 20 Pc/s 2d 14,500.00 184 20 Pc/s 4d 16,200.00 185 20 Pc/s 8d 21,800.00 186 30 Pc/s Ns60 8,300.00 187 15 Pc/s E-cab Battery 11,200.00 -wiper Blades 188 50 Pc/s 12" 500.00 189 50 Pc/s 14" 550.00 190 50 Pc/s 16" 600.00 191 50 Pc/s 17" 650.00 192 50 Pc/s 18" 700.00 193 50 Pc/s 19" 700.00 194 50 Pc/s 20" 750.00 195 50 Pc/s 21" 800.00 196 50 Pc/s 24" 850.00 197 50 Pc/s 26" 900.00 -1 Lot Navotas Motorpool Vehicle Repair And Maintenance Tools & Other Supplies 200,000.00 200,000.00 198 100 Gal. Car Wash And Wax Shampoo 330.00 199 100 Bottle/s Car Wax, Wax And Dry, 769ml 880.00 200 100 Oz. Carnauba Cleaner Paste Wax 14 Fl 850.00 201 100 Bottle/s High Gloss Tire Black, 250ml 330.00 202 150 Pc/s Chamois Towel 380.00 203 150 Pack/s Microfiber Absorbent Square Towel 40*40cm 250.00 204 10 Set/s 6-32mm Combination Wrench Set 4,500.00 205 10 Set/s Professional Car Tools Socket Wrench Complete Set 7,800.00 206 10 Set/s Diagonal Combination Long Nose Pump Plier Pliers Set 2,000.00 207 10 Set/s Tools Original Rapid Cross Wrench 17,19,21,23mm 2,140.00 208 10 Set/s Vise Grip Set 5wr And 10wr (set) 2,500.00 209 10 Pc/s Adjustable Wrenches Set (6", 8", 10") 1,500.00 210 10 Pc/s High Pressure Washer Water Spray Gun 726.00 211 10 Pc/s High Pressure Hose 20meters 2,915.00 212 10 Set/s Power Sprayer Repair Kit - V-packing And Valve Seal 600.00 213 10 Pc/s Lengthened Squeegee Cleaner Brush Shower Car Wiper Sponge 450.00 214 10 Pc/s Industrial Multi-function Grease Gun (500g - 8500psi) 1,500.00 215 10 Unit Electric Car Polisher Machine Auto Polishing Buffing 2,200.00 216 10 Pc/s Soft Wool Clean Polishing Buffing Bonnet Pad For Car Auto 180mm/7" 420.00 217 1 Unit/s Hydraulic Press 10 Ton 39,200.00 218 3 Unit/s Bottle Jack 20tons 6,000.00 219 10 Unit/s 3 Tons Industrial Jack Stand 2pcs / Pair Iht 3,100.00 220 10 Unit/s 70mai Car Jump Starte Portable 4,100.00 221 10 Pc/s High Pressure Washer Brass Quick Coupler Connectors 600.00 222 50 Pack/s Tubeless Tire Seal Strip Repair Plug 250.00 223 50 Pack/s Tire Patches 50mm 1,000.00 224 20 Set/s Auto Tire Repair Kit Tool 650.00 225 50 Can Vulcanizing Solution 400.00 226 10 Pc/s Car Tire Repair Kit Roller Auto Patch Roller 850.00 227 20 Gallon/s Bac-to-zero Solution 4,000.00 228 20 Gallon/s Disinfectant Solution 1,100.00 229 10 Set/s Booster Cable 800amp Heavy Duty 5.0m 12/24v With Plastic Case 4,500.00 230 10 Pc/s Heavy Duty Plastic Tool Box 980.00 231 2 Unit Original Industrial (empty) Roller Cabinet With 7pcs Drawers 29,000.00 232 10 Set/s Spark Plug Wrench Set 16" And 21" 1,700.00 233 10 Set/s 8pcs Screwdriver Set - Heavy Duty 1,545.00 234 10 Unit 6t/8t/12t Hydraulic Crimper Tool Kit Tube Terminals Lugs Battery Wire Crimping Force 3,800.00 235 10 Set/s 18pcs Hex Key And Torx Key Set(allen) 914.00 236 10 Pc/s Philip Screw 200mm 310.00 237 10 Pc/s Screw Driver 200mm 310.00 238 1 Set/s Mini Obd2 Scanner Car Diagnostic Tools 25,000.00 239 100 Can Brake Cleaner 650.00 240 100 Can Electronic Contact Cleaner 650.00 241 100 Can Anti Rust Lubricant 277ml 550.00 242 100 Pc/s Epoxy Steel 210.00 243 100 Pc/s Electrical Tape, Big 90.00 244 50 Pc/s Tapelon 30.00 245 1 Unit 3 Jawed Puller 1,500.00 246 1 Set/s Inner Bearing Puller 1,500.00 247 1 Set/s Car Steering Wheel Puller Removal Tool 1,200.00 248 1 Set/s Caliper Piston Compressor Press Tool Kit 1,200.00 249 1 Set/s Snapring Plier Set 1,500.00 250 30 Can Grease 350.00 251 30 Can Chain Lube 950.00 252 50 Pc/s Electrical Tape, Small 60.00 253 20 Pc/s Boat Battery 3sm 9,900.00 254 50 Pc/s Floor Matting 1,600.00 255 50 Pc/s Seat Cover 2,800.00 256 60 Pc/s Dashboard Matting 650.00 257 150 Pc/s Car Headlight Cleaner 350.00 258 150 Pc/s Car Glass Cleaner 350.00 259 2 Set/s High Pressure Washer 1700w, 220v 6,000.00 260 20 Assy./s Car Key Duplicate 800.00 261 50 Unit/s Bottle Jack 4tons 3,000.00 262 100 Pc/s Car Air Freshener 210.00 263 1 Unit/s 2hp Air Compressor, Cylinder: 2, Phase: 1, Pressure: 115, Psi Capacity: 88liters 32,500.00 264 100 Btls Acid Rain Remover (250ml) 450.00 265 1 Unit Water Dispenser 8,000.00 266 1 Unit Dc Inverter Mma-300 Welding Machine 20,000.00 267 1 Unit "oxy-acetylene Cutting Outfit W/complete Accessories Oxygen Cylinder, Acetylene Cylinder W/content " 28,000.00 268 2 Unit Heavy Duty Soldering Iron 300a/200a 6,300.00 269 10 Kilos "stainless Steel Electrode 308-1/16 " 1,500.00 270 20 Kilos Bronze Rod 1/8" 150.00 271 20 Can Soldering Paste 300.00 272 20 Roll Lead Soldering Wire (250g) 500.00 273 20 Pound Borax 1 Pound 350.00 274 1 Unit Cordless Impact Wrench 18v 12,500.00 275 1 Unit Hydraulic Floor Jack (double Pump, Low Profile), Model:asj-5l Max Lifting Cap: 5tons, Lifting Height: 75-500mm, Net Weight: 45kgs 20,000.00 276 2 Unit 40" Car Creeper 2,100.00 277 1 Unit Automatic Wire Stripper Cutting Crimper 8 1/4" Detection Cutter 4in1 1,800.00 278 5 Set/s T- Handle Socket Wrench #8,10,12,14,17,19 1,500.00 279 10 Set/s Wrench 8-32mm 2,000.00 280 3 Unit Air Blow Gun / Air Duster 16mm 350.00 281 5 Unit Vice Grip 1,000.00 282 5 Unit Hammer 650.00 283 5 Unit Voltage Tester Car Truck Circuit Tester Pen Automotive 450.00 284 5 Unit Battery Load Tester 100amp Load 1,100.00 285 5 Unit Spout Funnel For Oil 1,600.00 286 5 Unit Car Repair Inspection Lamp Work Light 450.00 287 5 Set/s Torque Wrech 1/2drive Click Type 2,000.00 288 5 Unit Jack Stand 6 Tons, Min Height: 382mm, Max Height: 600mm 5,600.00 289 5 Set/s Steel Toe Rubber Boots 1,200.00 290 10 Set/s Mechanical Heavy Duty Working Gloves 200.00 291 5 Set/s Safety Shoes High Cut Sewed And Vulcanized Leather Safety Shoes Boots 650.00 292 5 Pc/s Leather Long-sleeved Apron Waterproof Oil-proof 900.00 293 10 Set/s Arm Band Heat Protector 450.00 294 5 Pc/s Cover All Safety Suits 1,100.00 295 5 Pc/s Hard Hat Safety Helmet 500.00 296 20 Gallon/s Water Soluble Oil Degreaser 400.00 297 300 Pc/s Rags 3.00 298 300 Pc/s Sand Paper- #600,#1000,#1,200 10.00 299 10 Set/s Wire Brushes Set Nylon,steel,stainless 100.00 300 10 Pc/s Top Box Alloy, 45l 10,800.00 301 10 Set/s Top Box Bracket 2,200.00 Abc:php1,000,000.00 Delivery Schedule: By Ordering Agreement (terms Of Reference Attached To The Pr) -spare Parts Must Be Delivered Within 3 Calendar Days -tools & Supplies Within 15 Calendar Days Upon Receipt Of The Delivery Ordering Contract Note: For Other Information, Queries And Specifications Pertaining To The Said Request Please Coordinate With Our Canvasser (please Secure Complete List And/or Rfq Form From Ms. Maricar E. Pablo, At 09676781263 Pauline Anne S. Sioco At 09338100230, And Roxette May P. Poblete At 0936-493-5632 Or Email Address: Procurement@navotas.gov.ph) Terms And Conditions: 1. Bidders Shall Provide Correct And Accurate Information Required. 2. Bidders May Quote For All The Items. 3. Price Quotation/s Must Be Valid For A Period Of Thirty (30) Days Calendar Days From The Date Of Submission. 4. Price Quotation/s, To Be Denominated In Philippine Peso Shall Include All Taxes, Duties And/or Levies Payable. 5. Quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. 6. Delivery Period Expressed Merely In Days Or Working Days Shall Be Rejected. 7. Award Of Contract Shall Be Made To The Lowest Quotation (for Goods And Infrastructure) Or, The Highest Rated Offer (for Consulting Services) Which Complies With The Minimum Technical Specifications And Other Terms And Conditions Stated Herein. 8. Any Interlineations, Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initiated By You Or Any Of Your Duly Authorized Representative/s. 9. The Item/s Shall Be Delivered As Indicated In The Approved Bac Resolution/purchase Order. 10. The Procuring Entity Concerned Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Technical Specifications. 11. Liquidated Damages Equivalent To One Tenth Of One Percent (0.001%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. The City Government Of Navotas Shall Rescind The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. For The Committee Original Signed Atty. Joel Joselito D. Parong Bac Chairperson

Details: Description Gov. Celestino Gallares Multi-specialty Medical Center Invitation To Bid For Supply, Delivery, Installation, Testing And Commissioning Of 2 Lots Various Medical Equipment Batch 3 (re-bid) For Gov. Celestino Gallares Multi-specialty Medical Center 1. The Gov. Celestino Gallares Multi-specialty Medical Center (gcgmsmc), Through The Health Facilities Enhancement Program 2024 Intends To Apply The Sum Of Sixty Million Three Hundred Forty-four Thousand Nine Hundred Seventy-five Pesos Only (php60,344,975.00) Being The Abc To Payments Under The Contract For Cb:2024-12-0007. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Gcgmsmc, Through The Health Facilities Enhancement Program 2024 Intends To Apply The Sum Of Sixty Million Three Hundred Forty-four Thousand Nine Hundred Seventy-five Pesos Only (php60,344,975.00) Being The Abc To Payments Under The Contract For Each Lot/item.et Al. Lot No. Item/description Quantity Unit Cost Total Cost 1 Infusion & Monitoring System 1 37,344,975.00 37,344,975.00 2 Advanced Perfusion System, Cardiopulmonary Bypass Pump + In-line Blood Gas Monitoring Device 1 23,000,000.00 23,000,000.00 Grand Total 60,344,975.00 Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 2. The Gcgmsmc, Now Invites Bids For The Above Procurement Project. Delivery And Installation Of The Goods Is Required Within 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Bidders Should Have Completed, Within 3 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Gcgmsmc Through Electronic Mail Via Procurement@cpspecialtycenter.org Or Through The Cellular Number 09209437250. 5. A Complete Set Of Bidding Documents May Be Acquired And Downloaded By Interested Bidders From Gcgmsmc Google Drive From (procurement@cpspecialtycenter.org) On December 08, 2024– January 03, 2025 And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Indicated Below In Accordance With The Following Schedule: Lot No. Item/description Total Cost Bidding Documents Fee (in Philippine Peso) 1 Infusion & Monitoring System 37,344,975.00 25,000.00 2 Advanced Perfusion System, Cardiopulmonary Bypass Pump + In-line Blood Gas Monitoring Device 23,000,000.00 25,000.00 The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through Online Banking Or Online Deposit With The Following Bank Details: Bank Name: Development Bank Of The Philippines Account Name: Gcg Multi-specialty Medical Complex Account Number: 00-0-15490-780-5 "for Bidders Choosing To Pay Via Online Transfer Or Bank Deposit, Please Ensure That Proof Of Your Successful Transaction Is Promptly Sent To The Procurement Email Address: Procurement@cpspecialtycenter.org. In Compliance With Coa Circular Number 2021-014, Clause 5.2, An Acknowledgement Receipt Will Be Issued As Proof Of Verified And Received Payment. Access To Bidding Documents Will Be Granted Only Upon Presentation Of This Acknowledgement Receipt. 6. The Gcgmsmc Will Hold A Pre-bid Conference On The 17th Day Of December 2024 At 0900h At Room 3c-e310 Located At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur Cortes, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission On Or Before The 3rd Day Of January 2025 At 0900h At Gcgmsmc Procurement Office Room 3c-w327 Located At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur, Cortes, Bohol. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On The 3rd Day Of January 2025 At 0900h At Room 3c-e310 Located At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur Cortes. Bids Will Be Opened In The Presence Of The Bidders’ Authorized Representatives Together With Their Company Id. 10. The Gcgmsmc Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. Submission Of Hardcopies: Bidders Shall Submit Their Original Eligibility And Technical Documents Described In Itb Clause 10 In One Sealed Envelope Marked "original - Technical Component", And The Original Of Their Financial Component In Another Sealed Envelope Marked "original Financial Component", Sealing Them All In An Outer Envelope Marked "original Bid". Each Copy Of The First And Second Envelopes Shall Have 2 Copies And Similarly Sealed Duly Marking The Inner Envelopes As "copy No. 1 Technical Component" And "copy No. 1- Financial Component” And "copy No. 2- Technical Component" And "copy No. 2- Financial Component" And The Outer Envelope As "copy No. 1" And "copy No. 2" Respectively. These Envelopes Containing The Original And The Copies Shall Then Be Enclosed In One Single Envelope. Please Take Note That All Notarized Documents Must Be Treated As Original Copies For All The Submitted Documents (original, Copy 1, And Copy 2). It Is Imperative That Each Copy Retains Its Original Notarization To Ensure Legal Validity And Compliance. The Original And The Number Of Copies Of The Bid As Indicated In The Itb Clause 15 Shall Be Typed Or Written In Ink And Shall Be Signed By The Bidder Or Its Duly Authorized Representative/s. All Envelopes Shall: A. Contain The Name Of The Contract To Be Bid In Capital Letters; B. Bear The Name And Address Of The Bidder In Capital Letters; C. Be Addressed To The Procuring Entity's Bac In Accordance With Itb Clause 1; D. Bear The Specific Identification Of This Bidding Process Indicated In The Itb Clause 1 12. For Further Information, Please Refer To: Mary Grace L. Simbajon Jessa O. Quiñal Procurement Office Procurement Office Malayo Sur, Cortes, Bohol Malayo Sur, Cortes, Bohol Procurement@cpspecialtycenter.org Procurement@cpspecialtycenter.org +639209437250 +639452478632 December 06, 2024 Approved By: (signed) Doreen A. Lugo, Lpt Bac Chairperson Noted By: (signed) Laurence Elliot R. Tirol, Md, Fpcp Medical Center Chief ------------------------------------------------------------------------------------------------------------ Item: 1 Unit: Lot Qty: 1 Unit Cost: 37,344,975.00 Total Cost: 37,344,975.00 Description: Supply, Delivery, Installation, Testing & Commissioning Of Infusion & Monitoring System 150 Pump, Volumetric Infusion 40 Docking Station/s 1 Central Monitoring System 1 Mri-compatible Infusion System 1 Oximetry Monitoring System, Non-invasive Pump, Infusion Volumetric, 150 Units Size Less Than Or Equal To 210 (l) X 140 (w) X 73 (h) Millimeters (mm) Weight Less Than Or Equal To 1700 Grams (g) Screen Must Be At Least Three (3) Inches, Touchscreen, Thin Film Transistor (tft) Color Liquid Crystal Display (lcd), At Least 200 X 400 Pixel/s, Adjustable Brightness Levels Display Must Show The Following Information At Least: Infusion Status With Drug/s Name, Infusion Parameter/s, Real-time In-line Pressure; System Status Information With Infusion Mode, Intravenous Set Brand Or Bed Number, Alarm Symbol/s, Battery Status, Network Status, Relayed Status, And System Time; Must Show Infusion Status Indicator On The Door Accuracy: ≤ ± 4.5% Mode/s: Rate Mode, Dose Mode, Dose Time Mode, Time Mode, Sequential Mode, Intermittent Mode, Loading Dose Mode, Ramp Mode, Micro-infusion Mode And/or Drip Mode Must Support The Following Application/s : Intravenous Drug Infusion, Enteral Nutrition Feeding, And/or Blood Transfusion Flow Rate/s: 0.10-2300 Milliliter/s (ml) Per Hour (hr) And/or 0.10-2000 Ml/hr Increment/s: 0.01 Ml/hr (0.10-99.99 Ml/hr), 0.1 Ml/hr (100-999.9 Ml/hr), 1 Ml/hr (1000-2300 Ml/hr) Preset Time/s: 00:00:01-99:59:59 Preset Volume: 0.10-9999.99 Ml With Increments Of 0.01 Ml Accumulated Volume: 0.00-99999.99 Ml “keep Vein Open”: (kvo): 0.1-5.0 Ml/hr With Increment/s Of 0.01 Ml/hr Purge Rate: 0.1-2300 Ml/hr Bolus Rate: 0.1-2300 Ml/hr, Automatic Or Manual Occlusion Detection: 50-1125 Millimeters Mercury (mmhg) With At Least 15 Selectable Levels Such As 50, 150, 225, 300, 375, 450, 525, 600, 675, 750, 825, 900, 975, 1050, 1125 Mmhg); With Default Of 450 Mmhg; Pre Alarm Pops Up While Pressure Is Increasing; Auto-restart Capability Where On/off And Restart The Infusion When Occlusion Pressure Is Reduced; Pressure Unit/s Available Such As, Millimeters Mercury (mmhg), Kilo Pascal/s (kpa), Bar, And/or Pounds Per Square Inch (psi) Air Bubble Detection, With At Least Six (6) Level/s, 15, 50, 100, 250, 500, 800 Microliter/s; Air Accumulation 0.1-1.0 Ml Per 15 Minutes Dose Rate Unit/s Must Include The Following: Ng/kg/min, Ng/kg/hr, Ng/kg/24h; Ug/kg/min, Ug/kg/h, Ug/kg/24h, Mg/kg/min, Mg/kg/h, Mg/kg/24h; Mu/kg/min, Mu/kg/h, Mu/kg/24h; U/kg/min, U/kg/h,u/kg/24h; Ku/kg/min, Ku/kg/h, Ku/kg/24h; Eu/kg/min, Eu/kg/h, Eu/kg/24h; Mmol/kg/min,mmol/kg/h, Mmol/kg/24h; Mol/kg/min, Mol/kg/h, Mol/kg/24h; Mcal/kg/min, Mcal/kg/h, Mcal/kg/24h; Cal/kg/min, Cal/kg/h, Cal/kg/24h; Kcal/kg/min, Kcal/kg/h, Kcal/kg/24h; Meq/kg/min, Meq/kg/h, Meq/kg/24h; Auto Lock Time: 1-5 Minute/s Range With On/off Switch Drug Library Up To 5000 Drug/s, 30 Categories, Support For Color-coding History Log Up To 3500 Event/s Volume Collection Available In At Least 4 Method/s Including, 24 Hour Total, Current Total, Period, Timing Volume, Support History Rate Review Dose Error Reduction System Available Definition Of Dose Limit/s Automatic Alarm/s When Reaching Dose Limit/s Intravenous (iv) Administration Set Must Be Able To Accept Universal Iv Set/s Alarm/s Audible And Visual Alarm/s; Sound Volume Adjustable At Least Eight (8) Level/s 2 Level/s: High: Air In Line, Accumulated Air, Empty, Drop Error, Upstream Occlusion, Downstream Occlusion, Infusion Set Disengaged, No Infusion Tube, Infusion Set Error, No Drop Sensor, Battery Depleted, Volume To Be Infused (vtbi) Complete, Kvo Finish, Relay Invalid And/or System Error Low: Kvo Running, Battery In Use, Battery Error, Cms/egw Disconnected, Standby Time Expired, Dock Connection Interrupted, System Time Error, Relay Invalid Soon, Time Near End, Reminder And/or Low Battery Reminder: 1-5 Minute/s, On/off Switchable Connectivity Communication Wired And Wireless Usb Support Drug Library Import, Patient Data Import/export, History Record Export, Calibration Date Import/export; Multifunction Connector: Rs232, Nurse Call Connector, Dc Adapter Integration: Connect With Infusion Central Station, Connect With Central Monitoring System Battery Operating Time: More Than Or Equal To Five (5) Hour/s At 25 Ml/hr Charging Time: Less Than Or Equal To Five (5) Hour/s To Full Capacity Power Supply Voltage 100-240 Volt/s, Frequency 50-60 Hertz, (hz), Current 0.5-0.21 Ampere/s (a) Work Environment Level Of Resistance To Water And Dust At Least Ingress Protection Rating 33 (ip33) Classification Type Cf, Class 1, Ip33 Docking Station, 40 Units Size: Atleast270 (l) X 170 (w) X 390 (h) Millimeters (mm) Weight: Less Than Or Equal To 3900 Grams Display Screen At Least Three (3) Inches Organic Light Emitting Diode (oled) At Least 265 X 64 Pixels Resolution Showing The Following Information: Bed Number, Patient Name, Battery Status, Network Status, Total Volume For 24 Hours; Must Be Able To Connect Via Hl7 Protocol And Integrate With Hospital Information System/s And/or Electronic Medical Record/s Via Wired Or Wireless Protocol; Usb Support For Drug Library Importation, Patient Information Loading, Patient Data Export, History Record And/or Barcode Reader Connection Multifunctional Connector Rs232 And/or Nurse Call Connector Integration Capability To Synergise/connect With Patient Monitor, Connect With Infusion Central Station, And/or Connect With Central Monitoring System Night Mode Capability With On/off, Start Time, End Time And Sound Volume Adjustable History Record Up To 2500 Mounting Type For Horizontal And Vertical Pole Clamp: Horizontal Diameter Range 10 To 25 Mm; Vertical Diameter Range 15 To 40 Mm; One Pole Clamp Per Shelf Module Programmable Mode: Support Automatic Multi-channel Relay Maintenance: Support 2 To 24 Pumps Tool Free Assembly, Support Batch Calibration, Drug Library Import, And Software Upgrade/s Classification: Type Cf, Class 1, Ip33 Power Supply Battery: Lithium-ion 2500mah Operating Time Of At Least 2 Hours Charging Time At Most 6 Hours Ac Power: 100 To 240 V, 50 To 60 Hertz, 8 To 3.4 A Alarm/s Audible And Visual Alarm/s 2 Level/s: High: Battery Depleted, System Error : Low: Slave Controller Abnormal, Battery In Use, Low Battery, Battery Error, Local Area Network (lan) Internet Protocol (ip) Address Conflict, Wireless Lan Ip Address Conflict, Cms, Egw Disconnect Central Monitoring System System Component/s: Central Station System Center Which Connects Bedside Device/s Hardware: Display/s At Least 24 Inch Tft Lcd Screen/s Medical Grade, At Least Dicom 14, At Least Ip54 Rating Iec 60601, Touch Screen; Must Include Printer/s, Keyboard/s, Mouse/s And Speaker/s Main System Software Specification/s: Number Of Device Up To 64 Patient Monitor/s And Infusion Pump/s Per Station Alarm: Category: Physiological Alarm, Technical Alarm And System Prompt Remote Control: Alarm Switch, Alarm Limits, Alarm Priority, Alarm Pause And Alarm Reset Alarm Analysis: Support Alarm Statistics Trend Review: At Least 240 Hours; Full Disclosure At Least 240 Hours; Data Interface Connection Interface Integrated Egateway Or Standalone Egateway Mri Compatible Infusion System, 1 Unit Size Less Than Or Equal To 560 (l) X 540 (w) X 1540 (h) Mm Including Trolley, Excluding Iv Pole Weight Less Than Or Equal To 50 Kilograms Without Pump/s Display Screen At Least 3 Inches, Oled, 256 X 64 Pixels, Showing The Following Information: Bed Number, Patient Name, Battery Status, Network Status, Total Volume For The Past 24 Hours Infusion Of The Pump; Compatible Pumps At Least 4 Infusion Or Syringe Pumps Mri Scanner Compatibility For Both 1.5 And/or 3.0 Tesla Model/s Alarm/s Audible And Visual Alarm/s 2 Level/s: High: Battery Depleted, Magnet Indicator Battery Depleted, System Error : Low: Low Battery, Magnet Indicator, Battery Low, Battery Error, Lan Ip Address Conflict, Wlan Ip Address Conflict, Network Disconnected Magnet Indicator: Magnetic Field To Be Used In Magnetic Fields Up To 20 Mt; < 20 Mt Green; 20-40 Mt Yellow; > 40 Mt Red; Connectivity Communication Wired Or Wireless Usb Support Drug Library Import, Patient Data Import/export, History Record Export, System Upgrade Integration: Synergy With Patient Monitor, Connect With Infusion Central Station, Connect With Central Monitoring System Material: Ingress Protection Level Ip33 Safety Standards En 60601-1:2006 / A1:2013; En 60601-1-2:2015; En 60601-1-8:2007/a11:2017; F2025-15; F2182-19; F2213-17; F2503-20; Classification Type Cf Class Power Supply Battery: Lithium-ion At Least 3400mah; Ac Power: 100 To 240 V, 50 To 60 Hertz Dock: Operating Time At Least 10 Hours; Charging Time At Most 6 Hours Magnet Indicator: Operating Time Of At Least 720 Hours; Recharging Time At Most 8 Hours Oximetry Monitoring And Connectivity System, 1 Unit Expandable Patient Monitoring And Connectivity Hub That Integrates An Array Of Technologies, Devices, And Systems To Provide Multimodal Monitoring And Connectivity Solutions In A Single Clinician-centric Platform Regional Oximetry, Non-invasive Pulse Oximetry Display Resolution At Least 1280 X 800 Pixels, At Least 10 Inches Diagonal Size, Multi-touch Touchscreen; Customizable Multiple Screen Views To Feature The Most Applicable Data; Can Display Tissue Oxygen Saturation Of Specific Area; Can Display The Difference Between Current Rso2 And User Defined Baseline; Can Display The Difference Between Rso2 And Spo2; Pulse Rate; Perfusion Index; Pleat Variability Index; High-resolution Plethysmograph Waveform And/or Can Display Spectrogram Representing Activity For Both Sides Of The Brain; Must Have Ports Or Docks That Are Compatible To Plug And Play Modules For The Measurement Of Brain Function Monitoring, Regional Oximetry, And Non-invasive Pulse Oximetry Battery Capacity Is At Least Four Hours Module/s: Cerebral Oximetry At Least One, Pulse Co-oximetry At Least One Can Be Used As Bedside, Handheld And/or Transport Monitor Configurable Parameter And Alarm Settings By Patient Population Audible And Visual Alarms For Quick Identification Of Alarming Parameters With Redundant Speaker System. Particulars Vendor Shall Warrant That The Product Supplied Shall Equal The Published Specifications. Vendor Shall Provide No Less Than Five (5) Years Warranty On The System/equipment For Spare Parts And Service Upon Acceptance By End User/s. Vendor Agrees To Provide Free Of Charge All Parts And Labour Necessary To Repair The System During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Defective In Material Or Workmanship Under Normal Use. Vendor Must Conduct Quarterly Preventive Maintenance Program Or Frequently As Recommended By Principal / Manufacturer. Vendor Agrees To Add Equipment Down-time (in Number Of Days) To Total Warranty Period. Vendor Must Respond With Technical Support Staff, Either Remotely 2 Hours Or In-person Where Applicable, Within At Least Twenty-four (24) Hours Upon Notification Of End-user; And Must Perform Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification Of End-user; System/equipment Shall Be Delivered With At Least One (1) Copy Of All Service Manuals And At Least One (1) Copy Of All User Manuals. System/equipment Shall Be Delivered Complete With All Cabling, Connectors, Junction Boxes, Mounting Hardware, And All Other Accessories Necessary For Full Operation Of The System/equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid Any And All Software Necessary To Technically Support The System Shall Be Included Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied Devices Must Meet All Currently Applicable Safety Standards, Local And International Where Applicable. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted System For Not Less Than Five (5) Years After The Warranty Period Vendor Shall Agree To Provide Factory Or Principal Manufacturer Training And/or Certification For At Least One (1) In-house Biomedical Technologist Or Engineer And/or End-user. Vendor May Include Post-warranty Comprehensive Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimates For Major Spare Part/s Vendor To Shoulder Any Expenses Related To Delivery, Installation, Commissioning, Permit/s, Training And Other Sundries Necessary For The Complete Installation Of The Equipment Vendor Must Have Available Technical Staff And/or Office/s Within The Region Principal/manufacturer May Preferably Have An Existing / Active Quality Management System Certification E.g. Iso 13485 And/or Iso 9001 Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Principal’s / Manufacturer’s Products Must Have Been Present In The Local Market For The Past Ten (10) Years Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. -------------------------------------------------------------------------------------------------------------------- Item: 2 Unit: Lot Qty: 1 Unit Cost: 23,000,000.00 Total Cost: 23,000,000.00 Description: Advanced Perfusion System, Cardiopulmonary Bypass Pump + In-line Blood Gas Monitoring Device Heart & Lung Machine With Integrated Centrifugal Pump Built In Centrifugal Pump With The Following Specifications: Controls And Monitor Must Be Mounted To The Machine Drive Unit Must Allow For Interchangeable Components (must Have Flexible Drive Unit For Better Handling) Remote Control Display Panel Must Include The Centrifugal Status And Alarms Flow Sensor Must Be Non-invasive Type One (1) Integrated Centrifugal Pump Plus Either (a) Three (3) Singular Large Pumps + Two (2) Single Small Roller Pump Or (b) A Total Of Five (5) Roller Pumps With Flat Screen Monitor For Heart & Lung Machine Functionality Display Roller Pump Must Have Tubing Clamp Assembly Must Be A Rotatable Pump Head. With Hand Crank Intended For Manual Use In The Event Of Power Failure For Both Roller And Centrifugal Pump With Complete Safety Mechanism Device. Dual Pressure Module Sensor With Two (2) Cable Pressure Intended For Arterial Cardioplegia Digital Pressure Monitoring And Two (2) Manometer For Manual Monitoring. One (1) Temperature Module With At Least Two (2) Channels Level Sensor And Air Bubbles Sensor Intended For Adult And Pedia Circuits That Will Trigger The Machine To Temporarily Stop Avoiding Air Introduction To Patient With Mechanical Gas Blender For Oxygen And Compressed Air With Hose And Accessory Connectors Inclusion Of Vacuum Regulator Device Halogen Or Led Console Lamp With Flexible Arms Back-up Battery Which Can Provide Power For At Least 1 Hour Must Provide At Least Six (6) Pieces Of Tubing Clamp With Guard Can Be Powered By 230v ±10, 60hz With Four Heavy Duty Rolling Wheels And Non-scratching With Lock System Included In-line Blood Gas Monitoring Device The Machine Must Be Capable Of A Continuous Determination Of The Following Tests While On Cardiopulmonary Bypass (cpb): Blood Gas (ph, Pco2, Po2, Hco3, Be, So2) Electrolytes & Hematology (k+, Hgb, Hct) Patient Temperature Oxygen Deliver (do2) Inclusion Of Battery Pack To Ensure Uninterrupted Operation. Capable Of Displaying Alert/alarm Indicator When Parameters Fall Outside The Normal Values Must Be Lcd Or Led Screen Machine Must Be Portable And Fit With The Provided Pole Clamps/bracket For Monitoring In The Heart Lung Machine Cable Head Sensor For Testing Must Be Capable For Arterial Or Venous Sampling Monitoring Must Include Printer For Documentation Of Displayed Values 60 Hertz Machine Electrical Requirement Heater Cooler Machine, At Least Two (2) Unit/s Must Have At Least Two (2) Independent Circuits Intended Either For: A. Oxygenator Heat Exchangers And B. Patient Blankets One (1) Pair Of Hose With Corresponding Connectors For Each Independent Circuit Per Unit Can Be Powered By 230v ±10, 60hz Particulars Vendor Shall Warrant That The Product Supplied Shall Equal The Published Specifications. Vendor Shall Provide No Less Than Five (5) Years Warranty On The System/equipment For Spare Parts And Service Upon Acceptance By End User/s. Vendor Agrees To Provide Free Of Charge All Parts And Labour Necessary To Repair The System During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Defective In Material Or Workmanship Under Normal Use. Vendor Must Conduct Quarterly Preventive Maintenance Program Or Frequently As Recommended By Principal / Manufacturer. Vendor Agrees To Add Equipment Down-time (in Number Of Days) To Total Warranty Period. Must Provide Back-up Immediately Upon Notification Where Applicable. Vendor Must Respond With Technical Support Staff, Either Remotely (2 Hours) Or In-person Where Applicable, Within At Least Twenty-four (24) Hours Upon Notification Of End-user; And Must Perform Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification Of End-user; System/equipment Shall Be Delivered With At Least One (1) Copy Of All Service Manuals And At Least One (1) Copy Of All User Manuals. System/equipment Shall Be Delivered Complete With All Cabling, Connectors, Junction Boxes, Mounting Hardware, And All Other Accessories Necessary For Full Operation Of The System/equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products And Model/s Nearing And/or At The End-of-cycle Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid; Any And All Software Necessary To Technically Support The System Shall Be Included Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied Devices Must Meet All Currently Applicable Safety Standards, Local And International Where Applicable. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted System For Not Less Than Five (5) Years After The Warranty Period Vendor Shall Agree To Provide Factory Or Principal Manufacturer Training And/or Certification For At Least One (1) In-house Biomedical Technologist Or Engineer And Other Technical Staff (end-user/s); Vendor May Include Post-warranty Comprehensive Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimates For Major Spare Part/s Vendor To Shoulder Any Expenses Related To Delivery, Installation, Commissioning, Permit/s, Training And Other Sundries Necessary For The Complete Installation Of The Equipment Vendor Must Have Available Technical Staff And/or Office/s Within The Region Principal’s/ Manufacturer Products May Preferably Have An Existing/active Quality Management System Certification E.g. Iso 13485 And/or Iso 9001 Principal’s / Manufacturer’s Products Must Have Been Present In The Local Market For The Past Ten (10) Years, May Provide Certification Where Applicable Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances.

Details: Description Request For Quotations: Please Quote Your Best Offer For The Item/s Described Below, Subject To The Terms And Conditions Provided At The Dorsal Portion Of This Request For Quotation. Submit Your Quotation Duly Signed By You Or Your Duly Representative And Copies Of Eligibility Requirements (business Permit, Local/national Tax Clearance And Philgeps Certificate Of Registration) Not Later Than The Deadline For Submission. Items: Procurement For Maintenance Supplies And Materials Under The Other Supplies & Materials Expenses Fund Of The City General Services Office Lot 1- Maintenance Supplies And Materials Purchase Of Electrical Supplies, Plumbing Supplies, Carpentry Supplies, Acu Tools And Materials Other Supplies And Materials Expense (by Ordering Agreement) Pc/s 50 Access Valve 130.00 Tank/s 20 Acetelyne Gas Refill (standard Size) 3,500.00 Gallon/s 50 Acry Color Paint 750.00 Pc/s 50 Acrylone Roller #7 150.00 Pc/s 300 Adaptor, Male/female #1/2 45.00 Pc/s 60 Adaptor, Universal 90.00 Roll/s 20 Aerotape, Size: 1/8" Thick X2" X 30feet Roll 780.00 Pc/s 20 Aircon Washbag For 1hp To 3hp With Drain Hole 900.00 Pc/s 5 Analog Clamp Meter/tester 8,600.00 Pc/s 20 Analog Multimeter, Pointer Type, Zero Center Instrument 200mohm 1,600.00 Pc/s 300 Angle Bar, 1.5 X 1.5 X 2.0mm X 10ft, Slotted 720.00 Pc/s 300 Angle Bar, 1/4 X 1 X 20ft 850.00 Pc/s 300 Angle Bar, 1/4 X 2 X 20 Ft 2,500.00 Pc/s 300 Angle Bar, 3/16 X 1 X 20 Ft 780.00 Pc/s 300 Angle Valve, .5 X .5 Stainless -2 Way 500.00 Pc/s 300 Angle Valve, .5 X .5 Stainless -3 Way 490.00 Pc/s 300 Angular Bar, 1" 780.00 Pc/s 50 Anti Corrosion Spray Primer Paint, Density : 0, 95-1, 20 G / Ml 1,100.00 Pc/s 300 Baby Roller #4 130.00 Pc/s 300 Ballast, 40 Watts 250.00 Kilo/s 20 Barb Wire, Gauge 12 Thickness 3,450.00 Pc/s 300 Bareta De Cabra 24" 280.00 Pc/s 300 Bareta De Cabra 30" 650.00 Pc/s 300 Barrel Bolt #4 130.00 Pc/s 300 Bearing #6205 350.00 Set/s 300 Bidet 650.00 Sack/s 300 Binistay (buhangin) 310.00 Pc/s 300 Bisagra 2 X 4 400.00 Pc/s 300 Bisagra 4 X 4 260.00 Box/es 50 Black Screw # 3/16 X 1, 500s 1,350.00 Pc/s 500 Black Screw #1 4.00 Pc/s 500 Black Screw #2 13.00 Pc/s 500 Black Screw Metal #1.5 15.00 Pc/s 500 Black Screw Metal #2 17.00 Box/es 300 Blind Rivet 1/8 X 1 620.00 Box/es 300 Blind Rivet 1/8 X 1/2 510.00 Box/es 300 Blind Rivet 3/16 X 1 560.00 Box/es 300 Blind Rivet 3/16 X 1/2 310.00 Pc/s 20 Bolt Cutter 36" 3,250.00 Pc/s 500 Bolts And Nuts With Washer 18.00 Pc/s 500 Brass Ball Valve 1 Inch 370.00 Pc/s 500 Brass Ball Valve 1/2 Inch 320.00 Pc/s 500 Brass Ball Valve 3/4 Inch 410.00 Pc/s 500 Brass Gate Valve 890.00 Pc/s 500 Bronze Welding Rod 1/8 205.00 Pc/s 500 Cable Clamp 1/2 22.00 Pc/s 1000 Cable Tie, 5 Inches 5.00 Pc/s 300 Capacitor 60 Microfarad (single) 960.00 Pc/s 300 Capacitor 65 Microfarad (single) 1,020.00 Bag/s 1000 Cement, 40kg 510.00 Pc/s 20 Chainblock 1 Tonner 7,070.00 Pc/s 20 Chainblock 3 Tonner 12,900.00 Set/s 300 Check Valve 1/2 535.00 Set/s 300 Check Valve 3/4 760.00 Pc/s 300 Checkered Plate 3/16 X 4 X 8 12,200.00 Pc/s 300 Circuit Breaker 20 Amp With Aircon Outlet 1,300.00 Set/s 20 Circuit Breaker 250amp With Enclosure 13,150.00 Pc/s 300 Circuit Breaker 30 Amp 670.00 Pc/s 300 Circuit Breaker 60 Amp Bolt-on 2 Pole 1,520.00 Pc/s 300 Circuit Halogen Bulb #3 24v / 70 W 135.00 Pc/s 300 Clamp (ring Type) 3/4 Double 12.00 Pc/s 300 Clamp Meter With Lflex 1500v (micro) 49,500.00 Pc/s 300 Clog Drain Remover, 10 Meters (hand Crank Duct Dredge) 800.00 Pc/s 300 Cold Chisel 250.00 Kilo/s 200 Common Nail #1 190.00 Kilo/s 200 Common Nail #1.5 160.00 Kilo/s 200 Common Nail #2 210.00 Kilo/s 200 Common Nail #3 250.00 Kilo/s 200 Common Nail #4 240.00 Pc/s 500 Compact Pin Light 18 Watts G24d1 Socket 510.00 Kilo/s 200 Concrete Nail #1 180.00 Kilo/s 200 Concrete Nail #1.5 185.00 Kilo/s 200 Concrete Nail #2 175.00 Kilo/s 200 Concrete Nail #3 240.00 Kilo/s 200 Concrete Nail #4 175.00 Pc/s 300 Corrugated Sheet G24 8 Ft 1,500.00 Dozen/s 300 Cotton Gloves 320.00 Pc/s 300 Coupling 2" Orange 45.00 Pc/s 50 Cut-off Disc (12 Inch) 700.00 Set/s 10 Cut-off Machine (12 Inch) 18,200.00 Pc/s 300 Cutting Disc #4 210.00 Box/es 300 Cutting Disc 100mm X 1mm X 16mm 160.00 Pc/s 300 Cylindrical #1.5 450.00 Pc/s 300 Cylindrical #3/4 160.00 Pc/s 300 Cylindrical Hinges #1 140.00 Pc/s 300 Cylindrical Hinges #3/4 85.00 Pc/s 300 Deformed Bar 10mm 290.00 Pc/s 300 Deformed Bar 12mm 400.00 Pc/s 300 Deformed Steel Bar 12mm 530.00 Pc/s 300 Diamond Disc Cutter #4 535.00 Pc/s 300 Diamond Trowel Big 160.00 Pc/s 300 Diamond Trowel Medium 140.00 Pc/s 300 Diamond Trowel Small 140.00 Pc/s 300 Digging Bar, 25mm X 5ft 1,250.00 Pc/s 300 Door Knob 750.00 Pc/s 300 Door Knob Hole Saw Kit 310.00 Pc/s 300 Drill Bit #1/4 (concrete) 85.00 Pc/s 300 Drill Bit #1/4 (steel) 220.00 Pc/s 300 Drill Bit #1/8 (concrete) 75.00 Pc/s 300 Drill Bit #1/8 (steel) 120.00 Pc/s 300 Drill Bit #3/16 (concrete / Masonry) 80.00 Pc/s 300 Drill Bit #3/16 (steel) 150.00 Pc/s 300 Drill Bit #3/8 (concrete) 155.00 Pc/s 300 Drill Bit #3/8 (masonry) 135.00 Pc/s 300 Drill Bit #3/8 (steel) 430.00 Pc/s 300 Drill Bit #5/16 (concrete) 95.00 Pc/s 300 Drill Bit #5/16 (steel) 350.00 Pc/s 300 Drill Bit Set, Heavy Duty 6,850.00 Pc/s 300 Dual Flush Toilet Push Button 780.00 Pc/s 300 Duct Tape 830.00 Set/s 300 Duplex Universal Outlet W/ Ground And Shutter Set 303.00 Pc/s 300 Electric Tape, Large 81.00 Gallon/s 300 Emulsion 1,010.00 Pc/s 300 Entrance Cap 3/4 61.00 Liter/s 300 Epoxy All Purpose 1,212.00 Pair/s 300 Epoxy Gloss 1,717.00 Gallon/s 300 Epoxy Primer 1,919.00 Gallon/s 300 Epoxy Primer Gray W/ Catalyst 1,414.00 Gallon/s 300 Epoxy Reducer 808.00 Gallon/s 300 Epoxy Topcoat 1,869.00 Pc/s 300 Exhaust Fan, 12" 2,778.00 Pc/s 50 Exhaust Fan, Industrial, 12" 3,939.00 Pc/s 50 Exhaust Fan, Industrial, 16" 7,020.00 Pc/s 300 Expansion Shield 3/8 X 2 With Washers 71.00 Pc/s 50 Fan, Wall Fan, 16" 1,818.00 Pc/s 300 Faucet , Wall Mounted, For Cr 1,313.00 Pc/s 300 Faucet, Lavatory 1,212.00 Pc/s 300 Faucet, Pvc, Tb 505.00 Set/s 300 Faucet, With Telephone Shower 1,324.00 Pc/s 300 Fiber Cement 4 X 8 707.00 Pc/s 300 Fiber Cement Board 1/4 X 4 X 8 1,111.00 Kilo/s 500 Finishing Nail #1 162.00 Kilo/s 500 Finishing Nail #1.5 152.00 Kilo/s 500 Finishing Nail #2 157.00 Set/s 10 Fire Exit Door Lock 16,160.00 Pc/s 300 Flat Bar 1" 505.00 Pc/s 300 Flat Bar 3/16 X 1 X 20ft 485.00 Roll/s 300 Flat Cord #16 5,151.00 Pc/s 300 Flat Sheet 24 X 3 X 8 2,020.00 Pc/s 300 Flat Sheet 24 X 4 X 8 (liso) 1,717.00 Pc/s 300 Flat Washer 1 1/4 M32 61.00 Pc/s 300 Flat Washer 1 1/8 M28 41.00 Pc/s 300 Flexible Hose .5 X .5 X 16 Inches 273.00 Roll/s 300 Flexible Hose 1/2 Orange 1,414.00 Roll/s 300 Flexible Hose 3/4 Orange 1,818.00 Set/s 300 Flood Light 200w Led With Metal Halide 6,363.00 Quart/s 300 Floor Coating Chlorinated Rubber Base Marking 707.00 Quart/s 300 Floor Coating Chlorinated Rubber Base Reducer 404.00 Gallon/s 300 Floor Coating Rubber Base 2,525.00 Pc/s 300 Floor Drain Cover 4 X 4 152.00 Pc/s 300 Fluorescent Holder Snap Fit 26.00 Pc/s 300 Fluorescent Lamp 40 Watts 219.00 Pc/s 300 Fluorescent Lamp T8 Holder 56.00 Set/s 300 Fluorescent Light With Housing 583.00 Set/s 300 Folding Allen Wrench 7pcs/set 69-262 2.5- 10mm 707.00 Tank/s 50 Freon R134a, 13.6kg 7,070.00 Kilo/s 50 Freon R22 (refill) 935.00 Tank/s 50 Freon R22, 13.6kg 9,090.00 Kilo/s 50 Freon R410 (refill) 935.00 Tank/s 50 Freon R410a, 11.3kg 9,595.00 Kilo/s 50 Freon R32 (refill) 935.00 Tank/s 50 Freon R32, 9.5kg 9,595.00 Pc/s 500 G.i. Coupling 142.00 Pc/s 500 G.i. Coupling 3/4 132.00 Pc/s 500 G.i. Nipple 3 X 1/2φ 55.00 Pc/s 500 G.i. Pipe #1 1,515.00 Pc/s 500 G.i. Pipe #1/2 975.00 Pc/s 500 G.i. Pipe #3/4 1,212.00 Pc/s 500 G.i. Pipe 1.5 X 20 Ft 2,626.00 Pc/s 500 G.i. Pipe 1/2 S40 X 20 Ft 975.00 Pc/s 500 G.i. Pipe S40 #1 1,616.00 Pc/s 500 G.i. Pipe S40 #1 1/2 Diameter 2,626.00 Pc/s 500 G.i. Pipe S40 #3/4 Diameter 1,212.00 Pc/s 500 G.i. Pipe S40 #3diameter X 20 Ft 5,858.00 Kilo/s 500 G.i. Wire #16 192.00 Pc/s 50 Garden Hose 25 Meters 1/2 1,556.00 Pc/s 500 Gauge Manifold Hose Only For R22 556.00 Pc/s 500 Gauge Manifold Hose Only For R410 556.00 Pc/s 500 Glass Window 48 1/2 Cm X 75cm 707.00 Pc/s 500 Good Lumber 1 X 1 X 10 157.00 Pc/s 500 Good Lumber 1.5 X 1 X 10 172.00 Pc/s 500 Good Lumber 1.5 X 2 X 10 238.00 Pc/s 500 Good Lumber 1/2 X 1 X 10 101.00 Pc/s 500 Good Lumber 1/4 X 1 X 10 137.00 Pc/s 500 Good Lumber 2 X 2 X 10 314.00 Pc/s 500 Good Lumber 2 X 2 X 12 374.00 Pc/s 500 Good Lumber 2 X 3 X 12 566.00 Pc/s 500 Good Lumber 2 X 3 X 8 707.00 Pc/s 500 Good Lumber 2 X 4 X 12 733.00 Elf 10 Gravel 3,939.00 Sack/s 500 Gravel, 50kilos Per Sack 440.00 Set/s 20 Grinder (portable), Heavy Duty 5,454.00 Pc/s 500 Grinding Stone #4 172.00 Kilo/s 500 Grout 142.00 Pc/s 500 Grub Hoe (asarol) 707.00 Pc/s 500 Gypsum Board 1/2 X 4 X 8 1,111.00 Box/es 50 Gypsum Screw 1, 500s 606.00 Pc/s 200 Hacksaw Blade 137.00 Pc/s 200 Hacksaw With Blade 445.00 Pc/s 10 Hammer (martilyo), 25mm To 27mm 516.00 Pc/s 10 Hand Riveter 10.5" 874.00 Set/s 10 Hand Tools (combination Pliers, Long Nose Pliers, Adjustable Wrench, Mini Claw Hammer, Philips Screwdriver, Slotted Screwdriver, Sanp-off Blade Knife, Measuring Tape, Voltage Tester, Canvas Bag) 2,424.00 Set/s 10 Handle Drill Rechargeable Cordless Drill Screw Drive, Heavy Duty 15,150.00 Pc/s 50 Handle For Welding Machine 546.00 Pc/s 10 Heat Gun/hot Air Gun 2000w 2,525.00 Set/s 300 High Tensile Allen Caps Screw 7/16x2 With Nut Flat Washer 25.00 Pair/s 20 Hinges 2-ball Bearing Stainless 202.00 Pc/s 1000 Hollow Blocks 41.00 Pc/s 5 Jackhammer Portable, Heavy Duty 49,490.00 Pc/s 500 Jalousie 1/4 X 10 X 80 127.00 Pair/s 500 Jalousie Frame 14 Blades 1,111.00 Pc/s 500 Junction Box With Cover 61.00 Pc/s 5 K-400 Drum Machine / Drain Auger Cleaning Machine 22,725.00 Pc/s 300 Kindry 1 1/2 X 2 X 10 556.00 Pc/s 300 Kindry 2 X 4 X 10 1,274.00 Gallon/s 300 Lacquer Thinner 808.00 Bottle/s 300 Lacquer Thinner 350ml 81.00 Liter/s 50 Latex Color Lamp 243.00 Pc/s 300 Lavatory Bottle (p Trap) 1 1/2" 303.00 Pc/s 300 Lavatory Faucet, Stainless Steel 1,182.00 Pc/s 300 Led Bulb 15 Watts 505.00 Pc/s 300 Led Bulb 7 Watts 192.00 Pc/s 300 Led Panel 6 Watts Daylight 354.00 Pc/s 300 Led Panel 9 Watts Daylight 445.00 Pc/s 300 Led Panel Light 12 Watts 6500k Round Type 612.00 Pc/s 300 Led Panel Light 15 Watts 707.00 Pc/s 300 Led Panel Light 15 Watts (round Type) 778.00 Pc/s 300 Led Panel Light 165x165 12 Watts 657.00 Pc/s 300 Led Panel Light 18 Watts Round Type 808.00 Pc/s 300 Led Panel Light 18 Watts Round Type (ceiling Mounted) 702.00 Pc/s 300 Led Panel, 18w 6000k 197.00 Pc/s 300 Led Tube Light T8 Short 9 Watts Daylight 283.00 Pc/s 300 Led, Fluorescent, 18 Watts T8 606.00 Pc/s 300 Liston, 1/2 X 1 X 10 100.00 Pc/s 50 Long Elbow 3/4 51.00 Pc/s 50 Long Nose Pliers 505.00 Pc/s 20 Long Nose, 8", Heavy Duty 606.00 Pc/s 10 Magnetic Contactor 60 Amp 8,080.00 Pc/s 500 Male Adaptor With Pvc Locknut Metal 71.00 Pc/s 500 Male Plug Ordinary 75.00 Pc/s 300 Mapp Gas Self Ignition Turbo Torch 1,404.00 Pc/s 300 Mapp Gas, 400g 606.00 Kilo/s 300 Masilya Powder 51.00 Pc/s 300 Masonry Drill Bit 1/4 81.00 Pc/s 300 Metal Furring "angle" 86.00 Pc/s 300 Metal Furring "c" 263.00 Pc/s 300 Metal Screw Diameter 10mm X 2inch 13.00 Pc/s 300 Metal Screw Diameter 3/16 X 2inch 16.00 Pc/s 300 Metal Screw Flat Head 11.00 Pc/s 50 Mirror Glass 78 Cm X 195 Cm 3,737.00 Can/s 300 Multi Use Penetrating Oil, 382ml 521.00 Kilo/s 300 Nail, Umbrella Nail #2 1/2 187.00 Set/s 300 Nema 3r Enclosure With 30at Breaker Bolt On 1,717.00 Tank/s 20 Nitrogen Tank, 20kgs With Valve 12,120.00 Tank/s 20 Nitrogen Tank, Refill 808.00 Roll/s 10 Nylon Rope #12 6mm 1,515.00 Roll/s 10 Nylon Rope #16 8mm 1,717.00 Pc/s 10 Orbit Fan, 16", Heavy Duty 3,131.00 Pc/s 500 Outlet Universal Extension Surface Type, 2-gang 101.00 Pc/s 500 Outlet Universal Extension Surface Type, 3-gang 137.00 Pc/s 500 Outlet Universal Extension Surface Type, 4-gang 172.00 Pc/s 300 Padlock 30mm Heavy Duty 273.00 Pc/s 300 Padlock 40mm Heavy Duty 354.00 Pc/s 300 Paint Brush # 1 36.00 Pc/s 300 Paint Brush # 1 1/2 41.00 Pc/s 300 Paint Brush # 2 66.00 Pc/s 300 Paint Brush # 3 112.00 Pc/s 300 Paint Brush # 4 122.00 Gallon/s 300 Paint Thinner 606.00 Bottle/s 300 Paint Thinner 350ml 91.00 Liter/s 300 Paint, Acry Color 354.00 Gallon/s 300 Paint, Flat Wall Enamel 1,313.00 Gallon/s 300 Paint, Gloss Enamel 1,111.00 Pail/s 300 Paint, Latex Enamel 1,864.00 Gallon/s 300 Paint, Latex Flat 964.00 Pail/s 300 Paint, Latex Flat 3,727.00 Pail/s 300 Paint, Latex Gloss 4,343.00 Gallon/s 300 Paint, Latex Gloss 1,212.00 Pail/s 300 Paint, Latex Semi Gloss 3,950.00 Gallon/s 300 Paint, Roof Paint 1,005.00 Pc/s 300 Paint, Spray Paint, 300g 192.00 Quart/s 300 Paint, Tinting 137.00 Gallon/s 300 Paint, Waterproofing 1,212.00 Pair/s 300 Paleta 101.00 Pc/s 300 Panel Box 2 Branch Plug-in 1,111.00 Sack/s 20 Patching Compound 20kgs/sack 1,212.00 Roll/s 300 Pdx Wire #10 7,676.00 Meter/s 300 Pdx Wire #12 112.00 Roll/s 300 Pdx Wire #12 5,555.00 Pc/s 300 Piano Hinges 8ft 303.00 Pc/s 300 Pipe Tube 2" 3,460.00 Pc/s 300 Pipe Wrench (12") 1,066.00 Pc/s 300 Pipe Wrench (14") 1,238.00 Pc/s 300 Plain Sheet Gauge 18 X 4 X 8 2,222.00 Pc/s 300 Plastic Clamp Orange 3/4 11.00 Pc/s 300 Plastic Moulding 3/4 112.00 Pc/s 300 Plate, 2 Gang 86.00 Pc/s 300 Plies, 8", Heavy Duty 758.00 Pc/s 300 Plyboard 3/4 X 4 X 8 1,930.00 Pc/s 300 Plywood 1/2 X 4 X 8 (ordinary) 1,536.00 Pc/s 300 Plywood 1/4 X 4 X 8 859.00 Pc/s 300 Plywood 3/4 X 4 X 8 (marine) 2,424.00 Pc/s 300 Plywood 3/4 X 4 X 8 (ordinary) 2,334.00 Pc/s 300 Polycarbonate 1/4 X 4 X 8 2,222.00 Liter/s 300 Polyester Body Filler With Hardener 374.00 Roll/s 300 Polythelene Tape, 4" X 45m 202.00 Pc/s 300 Portable Auto Air Compressor Pump, Dc 12v, Heavy Duty 2,525.00 Set/s 5 Portable Welding Machine, Heavy Duty 15,150.00 Pc/s 300 Ppr Cutter, 42mm, Heavy Duty 707.00 Pc/s 300 Ppr Heater - Fusion Machine With Mould Size 20, 25, And 32 3,535.00 Pc/s 300 Ppr White 32mm 4m Long 980.00 Pc/s 300 Pressure Washer 1200w, Heavy Duty 5,555.00 Pc/s 300 Primer Multi-seal, 600g 1,212.00 Pc/s 300 P-trap (lavatory) 657.00 Pc/s 300 Push Cart 300kg - Heavy Duty 16,160.00 Set/s 10 Pushcart Wheel Wood 3 Pcs (12" Diameter X 3" Double Bearing) 7,070.00 Pair/s 300 Putty Knife (paleta) # 1 61.00 Pair/s 300 Putty Knife (paleta) # 1 1/2 71.00 Pair/s 300 Putty Knife (paleta) # 2 76.00 Pair/s 300 Putty Knife (paleta) # 5 61.00 Pc/s 300 Pvc 45 Deg Sanitary 2" 66.00 Pc/s 300 Pvc Adapter #3/4 29.00 Pc/s 300 Pvc Ball Valve 1/2 81.00 Pc/s 300 Pvc Ball Valve 3/4 112.00 Pc/s 300 Pvc Bracket #1/2 11.00 Pc/s 300 Pvc Cement, 100cc 172.00 Pc/s 300 Pvc Cement, 200cc 263.00 Pc/s 300 Pvc Clamp #1/2 11.00 Pc/s 300 Pvc Connector #1/2 With Thread 25.00 Pc/s 300 Pvc Coupling #1/2 21.00 Pc/s 300 Pvc Coupling #3/4 26.00 Pc/s 300 Pvc Elbow #1 Orange 101.00 Pc/s 300 Pvc Elbow #1/2 51.00 Pc/s 300 Pvc Elbow #1/2 Threaded 21.00 Pc/s 300 Pvc Elbow #2 Orange 81.00 Pc/s 300 Pvc Elbow #3/4 Blue 46.00 Pc/s 300 Pvc Elbow #3/4 Orange 71.00 Pc/s 300 Pvc Elbow 1/2 Moldex Plain 51.00 Pc/s 300 Pvc Elbow 1/2 Moldex W/ Thread 81.00 Pc/s 300 Pvc Elbow Sanitary 2" 127.00 Meter/s 300 Pvc Flexible Hose 36.00 Pc/s 300 Pvc Long Elbow #1/2 41.00 Pc/s 300 Pvc Long Elbow #3/4 66.00 Pc/s 300 Pvc Pipe #1 Orange 399.00 Pc/s 300 Pvc Pipe #1/2 Blue 152.00 Pc/s 300 Pvc Pipe #1/2 Diameter Threaded, Blue 172.00 Pc/s 300 Pvc Pipe #1/2 Orange 202.00 Pc/s 300 Pvc Pipe #2 Orange 622.00 Pc/s 300 Pvc Pipe #3/4 Blue 238.00 Pc/s 300 Pvc Pipe #3/4 Orange 314.00 Pc/s 300 Pvc Pipe Sanitary 2" 404.00 Pc/s 300 Pvc Plug 3/4 31.00 Pc/s 300 Pvc Short Elbow #1/2 30.00 Pc/s 300 Pvc Short Elbow #3/4 25.00 Pc/s 300 Pvc Tee 1/2 26.00 Pc/s 300 Pvc Tee 3/4 31.00 Gallon/s 50 Quick Dry Enamel 1,212.00 Pc/s 50 R134a Quick Connector Adapter Coupler With Low High Hvac All Copper Quick Connect Air Conditioner Refrigerant Adapter Universal Ac Manifold Gauge Auto Set Adjustable 1/4" 1,313.00 Set/s 50 R410/r22 Single Manifold Gauge (high Side) With Adaptor And 2 Pcs Hose 2,334.00 Kilo/s 300 Rags 142.00 Pc/s 300 Rake 8 X 35 X 125 545.00 Pc/s 300 Receptacle (bokilya) 71.00 Pc/s 300 Rectangular Trowel Pvc Rubber 273.00 Gallon/s 50 Red Oxide 746.00 Gallon/s 50 Reducer 955.00 Lb/s 50 Refill Of Fire Extinguisher - Dry Chemical 122.00 Pc/s 300 Roller Brush #4 76.00 Pc/s 300 Roller Brush #7 86.00 Pc/s 500 Roller Pan / Roller Tray 112.00 Pc/s 500 Roller Tray 71.00 Quart/s 500 Roof Sealant 1,111.00 Pc/s 1000 Round Bar 1" 2,253.00 Pc/s 500 Rubber Plug 96.00 Pc/s 500 Rubber Socket 167.00 Gallon/s 500 Rubberized With Catalyst 1,869.00 Bottle/s 500 Rust Converter, 4l 1,606.00 Pc/s 1000 Sacks, Net Weight 50kg 21.00 Sack/s 500 Sand Bistay, Approx. 10kg To 13kg 63.00 Pc/s 300 Sanding Disc #4 30.00 Pc/s 300 Sandpaper #100, #140, #180, #240, #500 71.00 Pc/s 300 Sanitary Pvc Fittings Emerald Clean Out W/ Plug 4" 404.00 Pc/s 20 Screw Driver (flat Screw),slotted 208.00 Set/s 20 Screw Driver Bit, ( 10pcs ) 152.00 Set/s 20 Screw Driver Set, Heavy Duty 1,111.00 Pc/s 300 Screw Driver, Phillips, 2 X 4 399.00 Liter/s 300 Sealant 909.00 Pc/s 300 Sealant Clear 485.00 Pc/s 300 Sealant Gun 9" 505.00 Pack/s 300 Sealant, 75ml 112.00 Pc/s 50 Shovel, Square/pointed 576.00 Pc/s 50 Side Cutter 8" 899.00 Pc/s 300 Silicon Gun 9" 505.00 Pc/s 300 Silicon Sealant, 300ml 485.00 Pc/s 500 Silver Rod 41.00 Sack/s 300 Skim Coat, 20kg 904.00 Pc/s 50 Sledge Hammer 6 Lb (maso) 1,515.00 Set/s 5 Socket Wrench Set 25 Pcs X 1/2 Dr. (10-32mm) 12pts 5,050.00 Pc/s 50 Soldering Iron, 100w 622.00 Roll/s 300 Soldering Lead, 1.2mm 808.00 Pair/s 300 Spatula 86.00 Pc/s 300 Spatula #5 122.00 Pc/s 300 Square Bar #12 X 20 546.00 Pair/s 50 Stainless Steel Bracket Corner Code With Screws 51.00 Pc/s 300 Starter 40 Watts 51.00 Pc/s 300 Steel Bar 10mm 273.00 Lot 300 Steel Bending Service 2,334.00 Pc/s 300 Steel Matting 3/16 X 4 X 8 1,212.00 Pc/s 300 Strainer, 4 Inches 470.00 Pc/s 300 Switch 122.00 Pc/s 300 Switch Light, Two-way 112.00 Pc/s 300 Switch, Single, Wide Series 172.00 Pc/s 300 Switch, Two-gang, Universal Wide Series, 243.00 Pc/s 300 Tape, Teflon 1/2 26.00 Pc/s 300 Tape, Teflon 3/4 29.00 Pc/s 300 Tek Screw Holder 137.00 Pc/s 300 Tek Screw, 1.5 6.00 Pc/s 300 Tek Screw, 2 1/2 11.00 Pc/s 500 Thermostat 667.00 Box/es 10 Thhn Wire #8 16,160.00 Roll/s 10 Thhn Wire Solid #12 7,454.00 Roll/s 10 Thhn Wire Stranded #10/7 10,605.00 Roll/s 10 Thhn Wire Stranded #12/7 6,879.00 Box/es 10 Thhn/thwn 3.5mm^2 6,464.00 Box/es 10 Thhn/thwn 5.5mm^2 9,797.00 Roll/s 20 Thhn/thwn 8.0 Mm^2 Wire Stranded 24,240.00 Bag/s 300 Tile Adhesive 25kg 516.00 Bag/s 300 Tile Grout 2kg 122.00 Pc/s 300 Tile Levelling Wedges 192.00 Pc/s 300 Tiles 20 X 90 571.00 Pc/s 300 Tiles 30 X 30 101.00 Box/es 300 Tiles 30 X 30 (ceramic) 202.00 Pc/s 300 Tiles 60 X 60 859.00 Bag/s 300 Tiles Grout Sponge 142.00 Pc/s 300 Tinting Color 697.00 Set/s 300 Toilet Bowl 5,980.00 Set/s 300 Toilet Flush Set Fittings Dual Button Flush Valve 364.00 Pc/s 300 Toilet Tank Flush Lever Single 61.00 Pack/s 300 Tox #5, 100s 61.00 Pack/s 300 Tox #6, 100s 101.00 Pc/s 50 Tubular 1.5 1x1x20 707.00 Pc/s 50 Tubular 1.5 2x3x20 1,869.00 Pc/s 50 Tubular 1.5 X 2 X 3 X 20 1,864.00 Pc/s 50 Tubular S40 # 2x1x20ft - 1.5mm 1,313.00 Pc/s 50 Tubular S40 # 2x2x20ft - 1.5mm 884.00 Pc/s 30 Universal Single Type Push Toilet Flush Button - 38mm 287.00 Set/s 50 Urinal Bowl 4,444.00 Pc/s 50 Urinal Push Button 1,243.00 Bottle/s 50 Varnish, 350ml 101.00 Pc/s 300 Wall Hook Screw 1/2" 11.00 Pc/s 300 Wall Hook Screw 3/4" 16.00 Kilo/s 300 Welding Rod 3/32 334.00 Kilo/s 300 Welding Rod 5/64 Stainless 627.00 Box/es 300 Welding Rod 6013 2,485.00 Liter/s 300 Wood Do Putty 455.00 Pack/s 300 Wood Glue 500grams 384.00 Pc/s 300 Wood Screw 3/16 X 2 8.00 Pc/s 300 Wood, 1 1/2 X 2 X 10, Lumber 415.00 Pc/s 300 Wood, 1 X 2 X 8 S4s 223.00 Pc/s 300 Wood, 1 X 4 X 8 425.00 Pc/s 300 Wood, 1.5 X 2 X 8 192.00 Pc/s 300 Wood, 1/2 X 1 X 10 101.00 Pc/s 300 Wood, 1/2 X 1 X 8 81.00 Pc/s 300 Wood, 1/2 X 2 X 8 132.00 Pc/s 300 Wood, 1/4 X 4 X 8 Plywood (marine) 879.00 Pc/s 300 Wood, 2 X 10 X 10 1,717.00 Pc/s 300 Wood, 2 X 2 X 12 374.00 Pc/s 300 Wood, 2 X 3 X 8 617.00 Pc/s 300 Wood, 2 X 3 X 8 S4s 374.00 Pc/s 300 Wood, 2 X 4 X 10 Kindry 1,283.00 Pc/s 300 Wooden Drill Bit #3/8 505.00 Pc/s 300 Wooden Plank 2" X 10" X 10' 2,525.00 Abc:php500,000.00 Target Date: 15 Calendar Days Delivery Upon Receipt Of Approved Delivery Ordering Contract (terms Of Reference Attached To The Pr) Note: For Other Information, Queries And Specifications Pertaining To The Said Request Please Coordinate With Our Canvasser (please Secure Complete List And/or Rfq Form From Ms. Maricar E. Pablo, At 09676781263 Pauline Anne S. Sioco At 09338100230, And Roxette May P. Poblete At 0936-493-5632 Or Email Address: Procurement@navotas.gov.ph) Terms And Conditions: 1. Bidders Shall Provide Correct And Accurate Information Required. 2. Bidders May Quote For All The Items. 3. Price Quotation/s Must Be Valid For A Period Of Thirty (30) Days Calendar Days From The Date Of Submission. 4. Price Quotation/s, To Be Denominated In Philippine Peso Shall Include All Taxes, Duties And/or Levies Payable. 5. Quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. 6. Delivery Period Expressed Merely In Days Or Working Days Shall Be Rejected. 7. Award Of Contract Shall Be Made To The Lowest Quotation (for Goods And Infrastructure) Or, The Highest Rated Offer (for Consulting Services) Which Complies With The Minimum Technical Specifications And Other Terms And Conditions Stated Herein. 8. Any Interlineations, Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initiated By You Or Any Of Your Duly Authorized Representative/s. 9. The Item/s Shall Be Delivered As Indicated In The Approved Bac Resolution/purchase Order. 10. The Procuring Entity Concerned Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Technical Specifications. 11. Liquidated Damages Equivalent To One Tenth Of One Percent (0.001%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. The City Government Of Navotas Shall Rescind The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. For The Committee Original Signed Atty. Joel Joselito D. Parong Bac Chairperson