Furniture Tenders

Details: Description Republic Of The Philippines Province Of Bukidnon Municipality Of Lantapan Invitation To Bid For Procurement Of Office Supplies For All Offices Of Lgu-lantapan (1st Bid) 1. The Local Government Unit Of Lantapan, Through The General Fund Intends To Apply The Sum Of One Million Seven Hundred Twenty-one Thousand Seven Hundred Eight Pesos (php 1,721,708.00) Being The Abc To Payments Under The Contract Procurement Of Office Supplies For All Offices Of Lgu-lantapan Ib # 2024-12-079 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Unit Of Lantapan Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Required Is 20 Calendar Days. Bidders Should Have Completed, From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184. 4. Prospective Bidders May Obtain Further Information From The Local Government Unit Of Lantapan And Inspect The Bidding Documents At The Address Given Below During Mondays To Fridays From 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 11, 2024 To January 2, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Personally Its Proof Of Payment For The Fees. [note: For Lot Procurement, The Maximum Fee For The Bidding Documents For Each Lot Shall Be Based On Its Abc, In Accordance With The Guidelines Issued By The Gppb; Provided That The Total Fees For The Bidding Documents Of All Lots Shall Not Exceed The Maximum Fee Prescribed In The Guidelines For The Sum Of The Abc Of All Lots.] 6. The Local Government Unit Of Lantapan Will Hold A Pre-bid Conference On December 17, 2024 At Municipal Conference Room Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bac Office 2nd Floor, Municipal Conference Room, Municipal Hall, Poblacion, Lantapan, Bukidnon, On Or Before 8:45 A.m (philippine Standard Time) On January 2, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 2, 2025 At 9:00 O’clock A.m At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. [insert Such Other Necessary Information Deemed Relevant By The Procuring Entity Such As The Use Of A Back-up Data Or Cloud Storage For Large Files Uploaded For Online Bid Submissions] 11. The Local Government Unit Of Lantapan Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Jefer Mae B. Macana Bac Secretariat Bac Office, 2/f Municipal Hall Purok 6, Poblacion, Lantapan Bukidnon, Philippines Email Add: Lant.bacsec2024@gmail.com 13. You May Visit The Following Website/s: Lantapan.gov.ph For Downloading Of Bidding Documents: Www.philgeps.gov.ph Date Of Issue: December 11, 2024 Engr. Jessell S. Pacturan, C.e. Bac Chairperson Reference No.: Ib # 2024-12-079 Name Of Project: Procurement Of Office Supplies For All Offices Of Lgu-lantapan Location Of Delivery: Lgu-lantapan, Bukidnon Abc: Php 1,721,708.00 Item No. Item Description Unit Of Issue Quantity Abc Unit Price Amount 1 Air Freshner Can 41 7,380.00 2 Albatross Pcs 81 3,240.00 3 Alcohol 500ml Bot 202 20,200.00 4 Alcohol Gal 17 9,350.00 5 A4tech Anti-glare Webcam Pk635g Pcs 1 3,000.00 6 Ballpen Pilot Black Pcs 322 11,270.00 7 Ballpen Pilot Blue Pcs 30 1,050.00 8 Ballpen Faber Castel Red Pcs 92 1,472.00 9 Ballpen Black Ordinary Pcs 591 5,910.00 10 Book Paper A4 Rms 455 109,200.00 11 Book Paper Short Rms 158 34,760.00 12 Book Paper Long Rms 688 172,000.00 13 Book Paper Long 80gsm Rms 5 1,400.00 14 Brown Envelope Long Pcs 959 6,713.00 15 Brown Envelope Short Pcs 311 1,866.00 16 Battery Double Aa Pack 42 3,570.00 17 Battery Triple Aaa Pack 25 2,125.00 18 Baygon Insect Killer Can 54 9,720.00 19 Book Paper Short 80 Gsm Rsms 5 1,250.00 20 Book Paper A4 80gsm Rms 25 6,500.00 21 Brother Ink Btd 60 Black Bot 63 25,200.00 Item No. Item Description Unit Of Issue Quantity Abc Unit Price Amount 22 Brother Ink 5000 Magenta Bot 32 12,800.00 23 Brother Ink 5000 Cyan Bot 32 12,800.00 24 Brother Ink 5000 Yellow Bot 32 12,800.00 25 Binder Clip Small Bx 99 3,465.00 26 Binder Clip Big Bx 96 5,760.00 27 Bath Soap Pc 4 160.00 28 Bar Soap (long Bar) Bar 30 1,200.00 29 Battery Rechargeable Double Aa Pc 5 1,250.00 30 Ballpen Fiber Castel Black Pc 529 8,464.00 31 Broom Stick Pc 29 1,015.00 32 Battery Eneloop Rechargeable Aa Pc 10 3,500.00 33 Ballpen Blue Pc 10 100.00 34 Battery 12v 5ah (for Ups) Pc 10 18,000.00 35 Columnar Notebook 12 Cols Pc 23 1,265.00 36 Cartolina Green Pc 12 120.00 37 Computer Mouse Wrieless Pc 9 3,150.00 38 Cannon Ink 810 Black Pc 4 8,600.00 39 Cannon Ink 811 Colored Pc 2 4,700.00 40 Clear Folder A4 Pc 26 416.00 41 Clear Folder Long Pc 136 2,448.00 42 Clear Folder Short Pc 32 512.00 43 Correction Tape Pcs 235 8,225.00 44 Correction Pen Pcs 16 1,760.00 45 Cartolina Pc 25 250.00 Item No. Item Description Unit Of Issue Quantity Abc Unit Price Amount 46 Computer Keyboard Usb Type Pc 16 5,600.00 47 Computer Mouse Usb Type Bot 17 5,100.00 48 Construction Paper Rm 8 2,800.00 49 Columnar Notebook 24 Cols. Pc 77 6,545.00 50 Cork Board Pc 7 5,320.00 51 Computer Mouse Pad Bot 11 1,650.00 52 Certificate Holder Short Pc 25 2,250.00 53 Certificate Holder Long Pc 44 4,400.00 54 Calculator Ordinary Bot 15 11,250.00 55 Calculator Scienttific Bot 1 1,250.00 56 Cutter Big Pc 13 585.00 57 Cutter Small Pc 3 75.00 58 Carbon Paper Plastofoil Long Black Pc 3 2,940.00 59 Continuos Paper Short 2 Ply Pc 24 54,000.00 60 Clear Envelope Long With Handle Pc 25 625.00 61 Cutter Blade Pc 1 25.00 62 Dtr Pc 12731 12,731.00 63 Dishawshing Liquid/paste Pc 112 6,720.00 64 Downy Bot 19 4,275.00 65 Dipper Big Pc 4 240.00 66 Data Filer Small With Cover Bot 2 700.00 67 Data Filer Big With Cover Pcs 215 81,700.00 68 Data Filer Big Without Cover Pc 25 7,500.00 69 Duct Tape Pc 39 2,730.00 Item No. Item Description Unit Of Issue Quantity Abc Unit Price Amount 70 Dust Pan Pc 17 1,105.00 71 Dishwashi Ng Sponge Pc 28 560.00 72 Double Sided Tape Roll 65 9,750.00 73 Data Folder Hard 76mmx230mmx380mm Pack 15 2,925.00 74 External Hard Drive 1tb Pc 5 12,500.00 75 Epson Ink 003 Black Pc 174 69,600.00 76 Epson Ink 003 Magenta Pc 79 31,600.00 77 Epson Ink 003 Cyan Pc 78 31,200.00 78 Epson Ink 003 Yellow Pc 78 31,200.00 79 Expanded Brown Envelope Long Pcs 816 14,688.00 80 Expanded Folder Long Pc 429 7,722.00 81 Electric Fan Pc 2 5,000.00 82 Elmers Glue 118 Ml Bot 45 2,520.00 83 Epson Ink T6641 Black Bot 49 19,600.00 84 Epson Ink T6642 Magenta Bot 17 6,800.00 85 Epson Ink T6643 Cyan Bit 17 6,800.00 86 Epson Ink T6644 Yellow Bot 22 8,800.00 87 Expanded Folder Long Yellow Pcs 350 6,300.00 88 Expanded Folder Long Blue Pcs 480 8,640.00 89 Folder Long Blue Pcs 30 210.00 90 Folder Long White Pcs 910 6,370.00 91 Folder Short White Pcs 81 486.00 92 Feather Duster Pc 16 1,040.00 93 Filing Tray 3 Layers Pc 8 6,000.00 Item No. Item Description Unit Of Issue Quantity Abc Unit Price Amount 94 Frame A4 Pcs 23 3,450.00 95 Ballpen Faber Castel Blue Pcs 15 240.00 96 Cotton Balls Pack 5 500.00 97 Glass Cleaner Bot 44 7,700.00 98 Halk White Enamel 100 Pcs /bx Bx 6 300.00 99 Garbage Basket Ordinary Big Pcs 18 4,500.00 100 Garbage Basket Pedal Type Pc 6 2,100.00 101 Garbage Bag Large Pack 4 600.00 102 Glass Window Wifer Pc 4 1,400.00 103 Gun Tucker Wire Arrow Jt21 Bx 4 720.00 104 Gun Tucker Jt21 Pc 3 6,750.00 105 Heavy Duty Cellophane With Handle Pc 200 7,000.00 106 Highlighter(stabilo Boss) Pc 164 7,380.00 107 Hp Ink 678 Black Pc 15 10,500.00 108 Hp Ink 678 Colored Pc 10 7,000.00 109 Hand Liquid Soap Pc 25 3,125.00 110 Hd-12n /24 Clincher Pc 1 2,000.00 111 Id Sling Pc 60 900.00 112 Id Jacket Pc 60 1,200.00 113 Index Tab Pc 14 3,500.00 114 Linen Paper Long Ordinary Pack 2 110.00 115 Linen Paper Short Ordinary Pack 135 7,020.00 116 Linen Paper Long Board Pc 11 660.00 117 Linen Paper Short Board Pc 355 19,525.00 Item No. Item Description Unit Of Issue Quantity Abc Unit Price Amount 118 Lysol Spray Pc 10 7,500.00 119 Linen Paper Short Blue Pack 10 520.00 120 Memeo Ppaer Long Pc 3 600.00 121 Memeo Paper Short Pc 2 360.00 122 Mop Head Pc 13 1,950.00 123 Mop Head With Handle Pc 23 8,050.00 124 Mounting Tape Roll 28 7,000.00 125 Masking Tape 1" Pc 31 1,860.00 126 ,masking Tape 2" Roll 49 3,430.00 127 Mannual Binding Machine Pc 1 5,000.00 128 Mailing Envelope Long White Bx 12 3,600.00 129 Manila Paper Pc 160 1,600.00 130 Muriatic Acid Gal 11 3,850.00 131 Notebook Pc 34 680.00 132 Official Record Book 500pp Pc 25 4,500.00 133 Paper Clip Small Bx 71 3,195.00 134 Paper Clip Jumbo Bx 76 3,800.00 135 Paper Fastener Plastic Pc 32 1,600.00 136 Paper Fastener Metal Bx 26 3,120.00 137 Pencil Pc 193 1,930.00 138 Paper Sharpener Small Gal 6 120.00 139 Post It Note Pad 744 33,480.00 140 Pentel Pen Fineblack Pc 87 4,350.00 141 Pentel Pen Black Broad Pc 82 4,100.00 Item No. Item Description Unit Of Issue Quantity Abc Unit Price Amount 142 Pentel Pen Blue Pc 5 250.00 143 Pentel Pen Red Pc 1 50.00 144 Pentel Pen Green Pc 5 250.00 145 Pail Big Pc 6 2,400.00 146 Push Pin Pack 33 1,155.00 147 Puncher Pc 14 2,520.00 148 Powder Soap Kls 99 14,850.00 149 Paper Cutter Big Pc 3 7,500.00 150 Photo Paper A4 Pad 65 6,500.00 151 Pvc Cover A4 Bx 1 990.00 152 Packaging Tape 2" Roll 13 975.00 153 Pledge Furniture Polisher Can 9 1,620.00 154 Paper Towel Interfold Pad 19 2,850.00 155 Pvc Cover Long Bx 1 1,100.00 156 Plastic Spiral Coil Binder Plastic Ring A4 32mm Pc 2 300.00 157 Plasric Spiral Coil Binder Plastic Ring A4 25mm Pc 2 400.00 158 Plastic Spiral Ring Long Bx 1 250.00 159 Plastic Spiral Ring Short Bx 1 250.00 160 Philippinea Flag 3 X 5 Pcs 50 20,000.00 161 Philippine Flag 4 X 8 Pcs 10 7,500.00 162 Rain Coat Single Whole Pc 2 1,200.00 163 Rubber Boots Pair 1 750.00 164 Rubber Eareser Bx 1 15.00 165 Ribbon Lq 310- Cartridge Pc 6 1,500.00 Item No. Item Description Unit Of Issue Quantity Abc Unit Price Amount 166 Ring Binder 1/4 Pc 3 180.00 167 Ring Binder 1/2 Pc 8 680.00 168 Ring Binder 1 Pc 6 600.00 169 Ring Binder 2 Pc 6 720.00 170 Rer Pad 10 500.00 171 Rug Pc 24 2,400.00 172 Ruler Pc 32 320.00 173 Record Book 300 Pp Pc 55 4,950.00 174 Record Book 500pp Pc 21 2,310.00 175 Rubber Band No. 18 Bx 3 1,050.00 176 Rubber Bnd Hd 350 Gsm Bx 5 2,000.00 177 Rice Cooker Pc 2 5,000.00 178 Rain Coat With Pants Set 3 4,500.00 179 Stamp-certified True Copy Pc 2 300.00 180 Stamp Released Pc 2 300.00 181 Stamp Received Pc 1 150.00 182 Sticker Paper A4 Pack 34 4,080.00 183 Scoth Tape 1' Roll 118 5,900.00 184 Scoth Tape 2' Roll 102 7,650.00 185 Scoth Brite Pc 44 2,640.00 186 Steel Wall Pc 5 300.00 187 Sign Pen Black Pc 900 27,000.00 188 Sign Pen Pilot Black Pc 56 8,400.00 189 Scissor Big Pcs 54 3,510.00 Item No. Item Description Unit Of Issue Quantity Abc Unit Price Amount 190 Soft Broom Pc 46 5,520.00 191 Staple Wire Hd-3ls 10mm Bx 14 1,680.00 192 Stapler With Remover Pc 39 17,940.00 193 Stamp Pad Inlk Purple Bx 33 1,485.00 194 Stamp Pad Ink Black Pc 8 360.00 195 Storage Box 50 Ltrs Pc 4 7,200.00 196 Spin Mop Pc 12 15,000.00 197 Spoon Doz 2 200.00 198 Sign Pen Black Uni Ball Impact Pc 211 33,760.00 199 Steel Map Pc 1 1,500.00 200 Stamp Pad Pc 15 900.00 201 Sign Pen Blue Pc 5 150.00 202 Stapler Swingline Big Hd Pc 4 3,000.00 203 Stick Glue Pc 46 460.00 204 Stapler Hd21-(23/17/120 Sheets) Pc 2 5,000.00 205 Staple Remover Pc 8 1,200.00 206 Staple Wire 35 Bx 135 6,075.00 207 Sign Pen Green Pc 6 180.00 208 Specialty Paper Vellum Board 180gsm Pack 50 3,250.00 209 Stapler Wioth Remover Hd Pc 9 4,140.00 210 Tissue Paper Doz 90 13,500.00 211 Thick Plastic Folder Long Pc 265 6,625.00 212 Tape Despenser Pc 9 1,620.00 213 Toilet Bowl Brush Pc 13 1,950.00 Item No. Item Description Unit Of Issue Quantity Abc Unit Price Amount 214 Tape Measure 100 Mtrs. Pc 1 600.00 215 Ups Pc 3 7,500.00 216 Usb 64 Gig Pc 3 2,400.00 217 Usb 8 Gig Pc 14 5,600.00 218 Usb 16 Gig Pc 7 3,500.00 219 Usb 32gig Pc 5 3,500.00 220 Whyte Board Pen Black Pc 39 1,950.00 221 White Board 4 X8 Pc 5 15,000.00 222 White Board Eareser Pc 7 455.00 223 Working Gloves Pair 3 450.00 224 Wet Wipes Pack 12 1,200.00 225 Wall Clock Pc 2 1,160.00 226 Yellow Pad Pad 8 320.00 227 Zonrox Gal 40 8,000.00 228 Coconut Scub Pcs 6 360.00 229 Dishwashing Liquid Bot 5 375.00 230 Floor Wax White Can 3 1,260.00 231 Zonrox Color Safe Gal 10 2,000.00 232 Table Shar Pener Pc 1 500.00 233 Toilet Pump Pc 6 780.00 234 Sliding Folder White Long Pc 60 1,500.00 235 Plastic Cellophe Cover Thick Mtrs 20 1,700.00 236 Linen Paper Short Light Blue Pack 20 1,200.00 237 Linen Paper Light Green Pack 65 3,900.00 Item No. Item Description Unit Of Issue Quantity Abc Unit Price Amount 238 Cloth Geena Earth Mint Green Mtrs 50 2,250.00 239 Medal Ordinary B-l-g Pcs 3000 90,000.00 Total Bid Price In Figure: Total Bid Price In Words: Prepared And Submitted By:

Details: Description Philippine Bidding Documents (as Harmonized With Development Partners) Supply & Delivery Of Meals & Services For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025(rebid) Government Of The Republic Of The Philippines Sixth Edition January 2025 Table Of Contents Glossary Of Acronyms, Terms, And Abbreviations ………………………….2 Section I. Invitation To Bid……………………………………………………..5 Section Ii. Instructions To Bidders…………………………………………...8 1. Scope Of Bid ………………………………………………………………………. 9 2. Funding Information………………………………………………………………. 9 3. Bidding Requirements ……………………………………………………………. 9 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 9 5. Eligible Bidders…………………………………………………………………… 9 6. Origin Of Goods ………………………………………………………………….. 10 7. Subcontracts ……………………………………………………………………… 10 8. Pre-bid Conference ………………………………………………………………. 10 9. Clarification And Amendment Of Bidding Documents …………………………… 10 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 10 11. Documents Comprising The Bid: Financial Component …………………………... 11 12. Bid Prices …………………………………………………………………………. 11 13. Bid And Payment Currencies ……………………………………………………… 12 14. Bid Security ………………………………………………………………………. 12 15. Sealing And Marking Of Bids ……………………………………………………… 12 16. Deadline For Submission Of Bids …………………………………………………. 13 17. Opening And Preliminary Examination Of Bids ………………………………….. 13 18. Domestic Preference ……………………………………………………………… 13 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 13 20. Post-qualification ………………………………………………………………… 14 21. Signing Of The Contract …………………………………………………………… 14 Section Iii. Bid Data Sheet …………………………………………………..15 Section Iv. General Conditions Of Contract ……………………...………..17 1. Scope Of Contract ………………………………………………………………… 18 2. Advance Payment And Terms Of Payment ……………………………………….. 18 3. Performance Security ……………………………………………………………. 18 4. Inspection And Tests ……………………………………………………………… 18 5. Warranty …………………………………………………………………………. 18 6. Liability Of The Supplier ………………………………………………………….. 19 Section V. Special Conditions Of Contract ………………………………….20 Section Vi. Schedule Of Requirements ……………………………………....24 Section Vii. Technical Specifications …………………………………………25 Section Viii. Checklist Of Technical And Financial Documents …………..29 Glossary Of Acronyms, Terms, And Abbreviations Abc – Approved Budget For The Contract. Bac – Bids And Awards Committee. Bid – A Signed Offer Or Proposal To Undertake A Contract Submitted By A Bidder In Response To And In Consonance With The Requirements Of The Bidding Documents. Also Referred To As Proposal And Tender. (2016 Revised Irr, Section 5[c]) Bidder – Refers To A Contractor, Manufacturer, Supplier, Distributor And/or Consultant Who Submits A Bid In Response To The Requirements Of The Bidding Documents. (2016 Revised Irr, Section 5[d]) Bidding Documents – The Documents Issued By The Procuring Entity As The Bases For Bids, Furnishing All Information Necessary For A Prospective Bidder To Prepare A Bid For The Goods, Infrastructure Projects, And/or Consulting Services Required By The Procuring Entity. (2016 Revised Irr, Section 5[e]) Bir – Bureau Of Internal Revenue. Bsp – Bangko Sentral Ng Pilipinas. Consulting Services – Refer To Services For Infrastructure Projects And Other Types Of Projects Or Activities Of The Gop Requiring Adequate External Technical And Professional Expertise That Are Beyond The Capability And/or Capacity Of The Gop To Undertake Such As, But Not Limited To: (i) Advisory And Review Services; (ii) Pre-investment Or Feasibility Studies; (iii) Design; (iv) Construction Supervision; (v) Management And Related Services; And (vi) Other Technical Services Or Special Studies. (2016 Revised Irr, Section 5[i]) Cda - Cooperative Development Authority. Contract – Refers To The Agreement Entered Into Between The Procuring Entity And The Supplier Or Manufacturer Or Distributor Or Service Provider For Procurement Of Goods And Services; Contractor For Procurement Of Infrastructure Projects; Or Consultant Or Consulting Firm For Procurement Of Consulting Services; As The Case May Be, As Recorded In The Contract Form Signed By The Parties, Including All Attachments And Appendices Thereto And All Documents Incorporated By Reference Therein. Cif – Cost Insurance And Freight. Cip – Carriage And Insurance Paid. Cpi – Consumer Price Index. Ddp – Refers To The Quoted Price Of The Goods, Which Means “delivered Duty Paid.” Dti – Department Of Trade And Industry. Exw – Ex Works. Fca – “free Carrier” Shipping Point. Fob – “free On Board” Shipping Point. Foreign-funded Procurement Or Foreign-assisted Project– Refers To Procurement Whose Funding Source Is From A Foreign Government, Foreign Or International Financing Institution As Specified In The Treaty Or International Or Executive Agreement. (2016 Revised Irr, Section 5[b]). Framework Agreement – Refers To A Written Agreement Between A Procuring Entity And A Supplier Or Service Provider That Identifies The Terms And Conditions, Under Which Specific Purchases, Otherwise Known As “call-offs,” Are Made For The Duration Of The Agreement. It Is In The Nature Of An Option Contract Between The Procuring Entity And The Bidder(s) Granting The Procuring Entity The Option To Either Place An Order For Any Of The Goods Or Services Identified In The Framework Agreement List Or Not Buy At All, Within A Minimum Period Of One (1) Year To A Maximum Period Of Three (3) Years. (gppb Resolution No. 27-2019) Gfi – Government Financial Institution. Gocc – Government-owned And/or –controlled Corporation. Goods – Refer To All Items, Supplies, Materials And General Support Services, Except Consulting Services And Infrastructure Projects, Which May Be Needed In The Transaction Of Public Businesses Or In The Pursuit Of Any Government Undertaking, Project Or Activity, Whether In The Nature Of Equipment, Furniture, Stationery, Materials For Construction, Or Personal Property Of Any Kind, Including Non-personal Or Contractual Services Such As The Repair And Maintenance Of Equipment And Furniture, As Well As Trucking, Hauling, Janitorial, Security, And Related Or Analogous Services, As Well As Procurement Of Materials And Supplies Provided By The Procuring Entity For Such Services. The Term “related” Or “analogous Services” Shall Include, But Is Not Limited To, Lease Or Purchase Of Office Space, Media Advertisements, Health Maintenance Services, And Other Services Essential To The Operation Of The Procuring Entity. (2016 Revised Irr, Section 5[r]) Gop – Government Of The Philippines. Gppb – Government Procurement Policy Board. Incoterms – International Commercial Terms. Infrastructure Projects – Include The Construction, Improvement, Rehabilitation, Demolition, Repair, Restoration Or Maintenance Of Roads And Bridges, Railways, Airports, Seaports, Communication Facilities, Civil Works Components Of Information Technology Projects, Irrigation, Flood Control And Drainage, Water Supply, Sanitation, Sewerage And Solid Waste Management Systems, Shore Protection, Energy/power And Electrification Facilities, National Buildings, School Buildings, Hospital Buildings, And Other Related Construction Projects Of The Government. Also Referred To As Civil Works Or Works. (2016 Revised Irr, Section 5[u]) Lgus – Local Government Units. Nfcc – Net Financial Contracting Capacity. Nga – National Government Agency. Philgeps - Philippine Government Electronic Procurement System. Procurement Project – Refers To A Specific Or Identified Procurement Covering Goods, Infrastructure Project Or Consulting Services. A Procurement Project Shall Be Described, Detailed, And Scheduled In The Project Procurement Management Plan Prepared By The Agency Which Shall Be Consolidated In The Procuring Entity's Annual Procurement Plan. (gppb Circular No. 06-2019 Dated 17 July 2019) Psa – Philippine Statistics Authority. Sec – Securities And Exchange Commission. Slcc – Single Largest Completed Contract. Supplier – Refers To A Citizen, Or Any Corporate Body Or Commercial Company Duly Organized And Registered Under The Laws Where It Is Established, Habitually Established In Business And Engaged In The Manufacture Or Sale Of The Merchandise Or Performance Of The General Services Covered By His Bid. (item 3.8 Of Gppb Resolution No. 13-2019, Dated 23 May 2019). Supplier As Used In These Bidding Documents May Likewise Refer To A Distributor, Manufacturer, Contractor, Or Consultant. Un – United Nations. Section I. Invitation To Bid Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Invitation To Bid For The Supply & Delivery Of Meals & Services For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025(rebid) 1. The Leyte Regional Prison, Through The General Appropriations Act (gaa) Of 2025 Intends To Apply The Sum Of Three Hundred Ten Thousand Pesos Only (₱310,000.00) Being The Abc To Payments Under The Contract For Supply & Delivery Of Meals & Services For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025(rebid). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Leyte Regional Prison, Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Until December 31, 2025 From The Receipt Of Notice To Proceed (ntp) And Contract Agreement. Bidders Should Have Completed, Within The Last Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project Equivalent To At Least Twenty-five Percent (25%) Of The Abc. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Leyte Regional Prison Bac Secretariat Using The Contact Below And Inspect The Bidding Documents At The Address Given Below During Monday To Friday From 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 17, 2025 8:00am - 5:00pm To January 24, 2025 8:00am – 8:55pm From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos Only (₱500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees And Presented In Person. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before January 24, 2025 @ 9:00am. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be On January 24, 2025 @ 9:00am At The Lrp – Conference Room, Administration Building, Leyte Regional Prison. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. Schedule Of The Bidding Activities Shall Be As Follows: Activites Date/time Venue 1. Sale And Issuance Of Bid Documents January 17, 2025 8:00am To 5:00pm To January 24, 2025 8:00am To 8:55am Office Of The Bac/bac Secretariat, Leyte Regional Prison, Abuyog, Leyte 2. Submission And Opening Of Bid Documents January 24, 2025 @ 9:00am Conference Room, Admin Building, Lrp, Abuyog, Leyte 10. The Lrp Bac Shall Use Non-discretionary And Non-discriminatory Measure Based On Sheer Luck As A Tie-breaking Tool (draw Lots) In The Event That Two Or More Bidders Were Declared As Lcrb In-order To Determine The Final Lcrb Based On The Following: I. In Alphabetical Order, The Bidder Shall Pick One Rolled Paper Ii. The Lucky Bidder Who Would Pick A Paper With “congratulations” Remark Shall Be Declared As The Final Lcrb And Recommended For The Award Of The Contract. 11. The Leyte Regional Prison Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Jeruel Go Office Of The Bac Secretariat Leyte Regional Prison, Abuyog, Leyte Cp # 09455311532, Email: Leurejz@yahoo.com 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.bucor.gov.ph/ Www.philgeps.gov.ph Date Of Issue: January 16, 2025 Mr. Tracy B. Soriano Bac Chairperson Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Leyte Regional Prison Wishes To Receive Bids For The Supply & Delivery Of Meals & Services For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025(rebid) With Identification Number Bid 2024-05rb. The Procurement Project For Supply & Delivery Of Meals & Services For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025(rebid) Is Composed Of One (1) Lot, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2025 In The Amount Of Three Hundred Ten Thousand Pesos Only (₱310,000.00). A. The Source Of Funding Is National Expenditure Program. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. Foreign Ownership Limited To Those Allowed Under The Rules May Participate In This Project. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That Subcontracting Is Not Allowed 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address {[insert If Applicable] And/or Through Videoconferencing/webcasting} As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Two (2) Years Prior To The Deadline For The Submission And Receipt Of Bids 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 11.5. Financial Proposals For Single Or Multi-year Framework Agreement Shall Be Submitted Before The Deadline Of Submission Of Bids As Prescribed In The Ib. For Multi-year Framework Agreement, Evaluation Of The Financial Proposal During This Stage Is For Purposes Of Determining Eligibility And Whether Or Not Such Financial Proposal Is Within The Abc. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. A. Payment Of The Contract Price Shall Be Made In Philippine Pesos 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until May 24, 2025. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On January 24, 2025 @ 9:00 Am At Lrp Administrative Building Conference Room As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As One Project Having Several Items That Shall Be Awarded As One Contract. 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification 20.1. Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Any Food Catering Services. B. Completed Within The Last Two (2) Years Equivalent To At Least Twenty-five Percent (25%) Of The Abc, Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed 12 No Further Instruction. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than ₱6,200.00, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than ₱15,500.00 If Bid Security Is In Surety Bond. 15 Electronic Copy/electronic Submission Is Not Allowed Each Bidder Shall Submit One (1) Original Copy And Three (3) Photocopies Of The First And Second Components Of Its Bid. 19.4 One Project Having Several Items That Shall Be Awarded As One Contract. 20.1 Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its; 1. Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) 2. Supporting Documents For The Slcc (sales Invoice Or Official Receipt Or End-users Acceptance) 3. Valid And Current Registration Certificate (sec Certificate Of Registration For Corporation Or Dti Certificate Of Registration For Sole Proprietorship Or Cda Certificate Of Registration For Cooperative) 4. Valid And Current Mayor’s Or Business Permit 5. Valid And Current Tax Clearance 6. Certificate Of Compliance Occupational Safety And Health Standards Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 5.1 In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 5.2 The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Special Conditions Of Contract Gcc Clause Delivery And Documents – Delivery Of The Catering Services Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi. Schedule Of Requirements. Delivery Time Of The Food To Be Served As Follows: Am Snacks – Not Later Than 9:30 Am Lunch – Not Later Than 11:30 Am Pm Snacks – Not Later Than 2:30 Pm Upon Delivery Of The Catering Services To The Project Site, The Supplier Shall Notify The Procuring Entity And Present The Following Documents To The Procuring Entity: (i) Original And Four Copies Of The Supplier’s Invoice Showing Goods’ Description, Quantity, Unit Price, And Total Amount; (ii) Delivery Receipt Detailing Number And Description Of Items Received Signed By The Procuring Entity’s Representative At The Project Site; (iii)certificate Of Acceptance/inspection Report Signed By The Procuring Entity’s Representative At The Project Site; For Purposes Of This Clause, The Procuring Entity’s Representative At The Project Site Is The End-user, Or His Duly Authorized Representative. When A Seminar Has Been Rescheduled Or Cancelled, Leyte Regional Prison, Reserves The Right To Cancel The Catering Service Upon Formal Notice To The Caterer Two (2) Days Prior To The Start Of The Occassions. In Such Case, Leyte Regional Prison, Has No Obligation To Pay The Supplier The Amount Corresponding To The Cancelled Catering Service. Where There Is An Increase Or Decrease Of Participants, The End-user Shall Inform The Supplier Of The Same Three (3) Days Prior The Occasion Date. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Transportation – The Transport Of The Food To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. The Procuring Entity Accepts No Liability For The Damage/spoilage Of Food During Transit. The Contract Price For The Catering Service Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Amount Stipulated In The Purchase Request (pr). After Each Occasion, The Supplier Is Responsible For Sending To The Leyte Regional Prison, A Billing Or Final Invoice For The Costs Of The Catering Service For Every Occasion Completed. It Shall Also Turn Over To The Bureau Any Remains/left Over Of The Catering Services Every End Of The Day For Its Use. 2.2 Partial Payment Is Not Allowed Cost For E-vat And Other Governmental Costs Which Fall Equally On All Prospective Suppliers Are Presumed To Be Included In The Computation Of The Bid Price 4 The Inspections And Tests That Will Be Conducted Are: The Evaluation Activities That Will Be Conducted At The Leyte Regional Prison, Upon Delivery Are As Follows: (1) Food Tasting On A Sampling Basis To Determine The Quality Of Food Served. (2) Ocular Inspection To Determine The Quantity And Completeness Of The Food Delivered In Accordance To The Menu Set In The Schedule Of Requirements. (3) Observation Before, During And After The Training Schedule To Determine The Quality Of Service Given By The Supplier. (4) Surveys Among The Participants To Determine The Level Of Satisfaction Of The Participants To The Service Rendered By The Supplier 6 Liability Of The Supplier: A. To Provide Food And Services For The Number Of Participants On The Basis Of The Information Given By The Procuring Entity Thru Df Of Pr Signed By The End-user Or Authorized Representative, At Least Two (2) Days Prior To The Training Schedule. B. During The Training, To Increase/ Decrease The Number Of Meals/snacks To Be Served For The Remaining Days Of A Specific Training Schedule, To Take Effect On The Second Day, Provided That Written Notice Is Given By The Procuring Entity Signed By The End-user Or Authorized Representative, Not Later Than 3:00 Pm On The First Day Of The Training. C. During The Training, To Adjust On Any Specific Food/diet Restrictions (religion Or Health Reasons) Of Participants’ Meals To Be Served For The Remaining Days Of A Specific Training Schedule, To Take Effect On The Second Day Provided That Written Notice Is Given By The Procuring Entity Signed By The End-user Or Authorized Representative, Not Later Than 3:00 Pm On The First Day Of The Training D. To Substitute The Menu For A Specific Training Schedule Due To Justifiable Reasons (unavailability In The Market, Red Tide, Supply And Demand Forces, Tropical Depression, Advisory Of Nonslaughter, Etc.) Provided That Notice Is Given To The Procuring Entity At Least One (1) Day Prior To The Schedule. Provided Further That The Change In The Menu Will Not Change The Unit Cost. E. To Reschedule/cancel The Seminar Due To Fortuitous Event/instances Beyond The Control Of Leyte Regional Prison F. To Provide The Necessary Clean And/or Sterile Dining Utensils During The Training As Enumerated In But Not Limited To The Following: 1) Glasses; 2) Spoons; 3) Forks; 4) Serving Spoons; 5) Cups; 6) Bowls; 7) Knives; 8) Trays; 9) Pitchers; 10) Glass Rack; 11) Ice Bucket; 12) Food Warmers; 13) Toothpicks; And 14) Condiments. G. To Provide Clean Table Cloth, Seat Covers And Table Napkins In The Designated Dining Area. H. To Assign At Least Two (2) Waiters/ Waitresses In Clean Working Garments Per Class/seminar And Shall Secure An Updated Health Certification From The Medical Health/authorized Officer. I. To Maintain A High Standard Of Sanitation And Cleanliness Of The Dining Area And Its Immediate Surroundings At All Times Adopting The Policy Of “clean As You Go”. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. State “comply” Or “not Comply” To The Statement Of Compliance. Item No. Description Quantity Delivery Schedule 1 Meals: Breakfast 620 Pax From The Receipt Of Ntp Up To December 31, 2025 Lunch 620 Pax From The Receipt Of Ntp Up To December 31, 2025 Dinner 620 Pax From The Receipt Of Ntp Up To December 31, 2025 2 Snacks: Am Snacks 620 Pax From The Receipt Of Ntp Up To December 31, 2025 Pm Snacks 620 Pax From The Receipt Of Ntp Up To December 31, 2025 The Quantity/units Is For Bidding Purposes Only. In The Actual Implementation Of The Contract, The Quantity/units That May Be Required May Increase/decrease As The Need Arises. I/we Hereby Commit To Comply And Deliver All The Above Requirements In Accordance With The Above Stated Schedule. Conforme: Name Of Company In Print Signature Printed Name Of Authorized Representative Date Section Vii. Technical Specifications Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Section Vii. Technical Specifications Item Specification Statement Of Compliance I The Catering Service Provider Shall Comply With The Government Regulations As Provided In Presidential Decree No. 856 Otherwise Known As “the Code On Sanitation Of The Philippines”. A. Sanitary Permit B. Health Certificate Of Food Handlers C. Quality And Protection Of Food Ii The Catering Service Provider Agrees: A. To Provide Food And Services For The Number Of Participants On The Basis Of The Information Given By The Procuring Entity Thru A Notice Signed By The Coordinator And Service Chief, Atfs Or Her Authorized Representative, At Least Two (2) Days Prior To The Training Schedule. B. During The Training, To Increase/ Decrease The Number Of Meals/ Snacks To Be Served For The Remaining Days Of A Specific Training Schedule, To Take Effect On The Second Day, Provided That Written Notice Is Given By The Procuring Entity Signed By The Coordinator And Service Chief, Atfs Or Her Authorized Representative, Not Later Than 3:00 Pm On The First Day Of The Training. C. During The Training, To Adjust On Any Specific Food/diet Restrictions (religion Or Health Reasons) Of Participants’ Meals To Be Served For The Remaining Days Of A Specific Training Schedule, To Take Effect On The Second Day Provided That Written Notice Is Given By The Procuring Entity Signed By The Coordinator And Service Chief, Atfs Or Her Authorized Representative, Not Later Than 3:00 Pm On The First Day Of The Training. D. To Substitute The Menu For A Specific Training Schedule Due To Justifiable Reasons (unavailability In The Market, Red Tide, Supply And Demand Forces, Tropical Depression, Advisory Of Nonslaughter, Etc.) Provided That Notice Is Given To The Procuring Entity At Least One (1) Day Prior To The Schedule. Provided Further That The Change In The Menu Will Not Change The Unit Cost. E. To Reschedule/cancel The Seminar Due To Fortuitous Event/instances Beyond The Control Of Leyte Regional Prison. F. To Provide The Necessary Clean And/or Sterile Dining Utensils During The Training As Enumerated In But Not Limited To The Following: 1) Glasses; 2) Spoons; 3) Forks; 4) Serving Spoons; 5) Cups; 6) Bowls; 7) Knives; 8) Trays; 9) Pitchers; 10) Glass Rack; 11) Ice Bucket; 12) Food Warmers; 13) Toothpicks; And 14) Condiments. G. To Provide Clean Table Cloth, Seat Covers And Table Napkins In The Designated Dining Area. H. To Assign At Least Two (2) Waiters/ Waitresses In Clean Working Garments Per Class/seminar And Shall Secure An Updated Health Certification From The Medical Health/authorized Officer. I. To Maintain A High Standard Of Sanitation And Cleanliness Of The Dining Area And Its Immediate Surroundings At All Times Adopting The Policy Of “clean As You Go”. Additional Requirements 1 The Lrp Shall Inform The Concessionaire Of The Total Number Of Actual Participants At Least Three (3) Days Before The Conduct Of The Training. 2 The Service Provider Shall Assure The Quality Of Food To Be Served Maintaining High Standards Of Sanitation. In The Event That That The Food Served Has Indication Of Spoilage, The Caterer Shall Be Allowed To Make Substitution Upon The Approval Of The Course Administrator. 3 The Service Provider Shall Submit Or Provide Menu Including Healthy Foods Such As Rice, Beef, Chicken, Pork, Seafoods, Vegetables, Dessert/fruits, Fruit Juice 4 The End User Can Request Specific Meals Or Snacks And Services They Prefer As Long As Requests Remain Within The Allocated Budget Per Meal, Snacks And Services 5 Subject To Increase/decrease Of Participants. 6 The Caterer Shall Serve Consumables Of One (1) Lunch And Two (2) Snacks Per Day Which Shall Be Ready For Inspection By 11:15am, Snacks By 8:45am And 2:30pm, Respectively. 7 The Service Provider Shall Not Require Advance Payment And Deposit To Guarantee Reservation. 8 The Concessionaire Shall Assign At Least Four (4) Waiters/waitresses In Clean Working Garments In Trainings With 50 Or More Participants And At Least 2-3 Waiters/waitresses For Trainings With Less Than Or Equal To 50 Participants. 9 The Lrp Reserves The Right To Cancel/reschedule The Delivery Of Catering Services In Case Of Major Institutional Mandates/changes, Calamities, Etc. Upon Formal Notice To The Caterer At Least Three (3) Days Prior To The Event. 10 The Lrp Shall Pay The Concessionaire At Least Five (5) Days After The Billing Statements Have Been Received By The Office. 11 The Lrp Reserves The Right To Substitute/reschedule Trainings. 12 The Service Provider Shall Provide At Least Two (2) Buffet Tables With Centerpiece For Trainings With Less Than Or Equal To Fifty (50) Participants And At Least Four (4) Buffet Tables Inside The Function Hall For Trainings With More Than Fifty (50) Participants. 13 The Lrp Reserves The Right To Substitute/reschedule Trainings. Rice: A Serving Must Be Provided With Each Meal Viand: Each Meal Should Include One Main Viand Vegetables: A Side Of Vegetables Should Accompany The Meal To Ensure Balanced Nutrition. Desserts Or Sweets: Each Meal Should Include A Dessert Or Any Sweet Treat. Beverage: Participants Should Be Offered Bottled Water/canned Juice/softdrinks. I Hereby Certify That The Statement Of Compliance To The Foregoing Technical Specifications Are True And Correct, Otherwise, If Found To Be False Either During Bid Evaluation Or Post- Qualification, The Same Shall Give Rise To Automatic Disqualification Of Our Bid ___________________________________________ Name Of Company In Print ___________________________________________ Signature Over Printed Name Of Authorized Representative Section Viii. Checklist Of Technical And Financial Documents Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; Technical Documents ⬜ (b) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (d) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (e) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (f) Original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (g) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (h) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (i) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (j) Original Of Duly Signed And Accomplished Price Schedule(s). Ix. Bidding Forms Company Letterhead Statement Of Ongoing Government & Private Contracts Supply & Delivery Of Meals & Services For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025(rebid) Bid Reference No.: Bid2024-05rb Statement Of All Its Ongoing Government And Or Private Contracts Including Contracts Awarded But Not Yet Started, If Any Whether Similar Or Not Similar In Nature. Name Of Contract Date Of Contract Contract Duration Owner’s Name And Address Kind Of Goods Amount Of Contract Value Of Outstanding Contract Certified Correct: Name And Signature Of Authorized Representative Position Date Company Letterhead Statement Of Single Largest Completed Contract Supply & Delivery Of Meals & Services For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025(rebid) Bid Reference No.: Bid2024-05rb Statement Of Single (1) Largest Completed Contract Of Similar In Nature Within The Last Two (2) Years From The Date Of Submission And Receipt Of Bids Amounting To At Least Fifty Percent (50%) Of The Approved Budget Of The Contract (abc) Name Of Contract Date Of Contract Contract Duration Owner’s Name And Address Kind Of Goods Amount Of Contract Amount Of Completed Contracts, Adjusted By The Bidder To Current Prices Using Psa’s Consumer Price Index, If Necessary Date Of Delivery End User’s Acceptance Or Official Receipt(s) Or Sales Invoice Issued For The Contract, (attached Copy) Certified Correct: Name And Signature Of Authorized Representative Position Date Company Letterhead Supply & Delivery Of Meals & Services For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025(rebid) Bid Reference No.: Bid2024-05rb Certificate Of Net Financial Contracting Capacity ((please Show Figures At How You Arrived At The Nfcc) This Is To Certify That Our Net Financial Contracting Capacity (nfcc) Is _________________________(p____________) Which Is At Least Equal To The Total Ceiling Price We Are Bidding. The Amount Is Computed As Follows: (please Show Computation Of Nfcc) Nfcc = (ca-cl) (15) – C Where: Ca = Current Assets Cl = Current Liabilities C = Value Of All Outstanding Or Uncompleted Portions Of The Projects Under Going Contracts, Including Awarded Contracts Yet To Be Started Coinciding With The Contract For This Project Note: The Values Of The Bidder’s Current Assets And Current Liabilities Shall Be Based On The Audited Financial Statement Submitted To The Bir. Issued This _______day Of __________2025 _______________________________________________ Name & Signature Of Authorized Representative ____________________ Position _______________ Date Company Letterhead Supply & Delivery Of Meals & Services For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025(rebid) Bid Reference No.: Bid2024-05rb Republic Of The Philippines) City Of _______________________) S.s. X------------------------------------------------------x Bid Securing Declaration Invitation To Bid: [insert Reference Number] To: Leyte Regional Prison I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid-securing Declaration. 2. I/we Accept That: (a) I/we Will Be Automatically Disqualified From Bidding For Any Contract With Any Procuring Entity For A Period Of Two (2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen (15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1, Except 69.1(f), Of The Irr Of Ra 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid Securing Declaration Shall Cease To Be Valid On The Following Circumstances: (a) Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; (b) I Am/we Are Declared Ineligible Or Post-disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; (c) I Am/we Are Declared The Bidder With The Lowest Calculated Responsive Bid, And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ____ Day Of [month] [year] At [place Of Execution]. [insert Name Of Bidder’s Authorized Representative] [insert Signatory’s Legal Capacity] Affiant Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ________ And His/her Community Tax Certificate No. _______ Issued On ____ At ______. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued] Doc. No. _____ Page No. _____ Book No. _____ Series Of _____ Company Letterhead Supply & Delivery Of Meals & Services For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025(rebid) Bid Reference No.: Bid2024-05rb Omnibus Sworn Statement Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. Select One, Delete The Other: If A Sole Proprietorship: I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. Select One, Delete The Other: If A Sole Proprietorship: As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For Supply & Delivery Of Meals & Services For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025(rebid) Of The Leyte Regional Prison As Shown In The Attached Duly Notarized Special Power Of Attorney; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For The Supply & Delivery Of Meals & Services For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025(rebid) Of The Leyte Regional Prison, As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. Select One, Delete The Rest: If A Sole Proprietorship: The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Partnership Or Cooperative: None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Corporation Or Joint Venture: None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Following Responsibilities As A Bidder: A) Carefully Examine All Of The Bidding Documents; B) Acknowledge All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C) Made An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D) Inquire Or Secure Supplemental/bid Bulletin(s) Issued For The Supply & Delivery Of Meals & Services For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025(rebid). 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ________ And His/her Community Tax Certificate No. _______ Issued On ____ At ______. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued] Doc. No. _____ Page No. _____ Book No. _____ Series Of _____ Company Letterhead Supply & Delivery Of Meals & Services For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025(rebid) Bid Reference No.: Bid2024-05rb Bid Form Date: Invitation To Bid No: Bid 2024-05rb To: Mr. Tracy B. Soriano, Msca Bac Chairperson Leyte Regional Prison Abuyog, Leyte Gentlemen And/or Ladies: Having Examined The Bidding Documents Including Bid Bulletin Numbers [insert Numbers], The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To Supply & Deliver Meals & Services For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025(rebid) In Conformity With The Said Bidding Documents For The Sum Of __________________________________________₱ ________ Or Such Other Sums As May Be Ascertained In Accordance With The Schedule Of Prices Attached Herewith And Made Part Of This Bid. We Undertake, If Our Bid Is Accepted, To Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements. If Our Bid Is Accepted, We Undertake To Provide A Performance Security In The Form, Amounts, And Within The Times Specified In The Bidding Documents. Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/confirm That We Comply With The Eligibility Requirements Of The Bidding Documents. I/we Likewise Certify/confirm That The Undersigned, [for Sole Proprietorships, Insert]: As The Owner And Sole Proprietor Or Authorized Representative Of [name Of Bidder], Has The Full Power And Authority To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract, On The Latter’s Behalf For The Supply & Deliver Meals & Services For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025(rebid). We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Including The Attached Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Dated This ________________ Day Of ________________ 20______. [signature] [in The Capacity Of] Duly Authorized To Sign Bid For And On Behalf Of ____________________________ Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Schedule Of Prices Supply & Delivery Of Meals & Services For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025(rebid) Qty. Unit Of Issue Agency Specification Abc Unit Price Total Bid Price Inclusive Of Vat Meals 620 Pax Breakfast ₱62,000.00 620 Pax Lunch ₱93,000.00 620 Pax Dinner ₱93,000.00 Snacks 620 Pax Am Snacks ₱31,000.00 620 Pax Pm Snacks ₱31,000.00 Total Bid Price Inclusive Of Vat In Words The Quantity And Unit Of Issue Is For Bidding Purposes Only. In The Actual Implementation Of The Contract, The Quantity That May Be Required May Increase/decrease As The Need Arises. [signature] [in The Capacity Of] Duly Authorized To Sign Bid For And On Behalf Of ____________________________

Details: This Is A Combined Synopsis/solicitation For Commercial Products And Commercial Services Prepared In Accordance With The Format In Federal Acquisition Regulation Part 12, Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation. Quotations Are Being Requested And A Written Solicitation Will Not Be Issued. The Contracting Officer Is Utilizing Policies And Procedures Prescribed In Part 12, Acquisition Of Commercial Products And Commercial Services. Solicitation Number Rfq 45310025q0008 Is Issued As A Request For Quotation (rfq). The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2025-01 Effective On November 12, 2024. Convention Centers, Hotels, And Other Full Service Facilities That Can Satisfy The Requirements Listed Below Are Encouraged To Submit A Quotation. Quotations From Third-party Entities Will Not Be Considered. This Solicitation Is Considered An Unrestricted Procurement. the U.s. Equal Employment Opportunity Commission Office Of Field Programs, State, Local And Tribal Programs Has A Requirement For A Contractor To Provide Meeting Facilities, Rental Of Audio Visual Equipment/support Services, Food And Beverages, Business Services And Lodging To Conduct A Four-day Joint Fepa-tero Conference. The United States Equal Employment Opportunity Commission (eeoc) Is Conducting A Joint Training Conference For Fair Employment Practices Agencies (fepas) And Tribal Employment Rights Offices (teros). the Government Anticipates With A Minimum Of 225 Attendees And An Anticipated Maximum Of 250 Attendees. To Be Eligible For Consideration, The Contractor’s Proposed Facility For The Seminar Must Be Located In Downtown Phoenix, Arizona. the Government Contemplates The Award Of A Firm-fixed Price (ffp) Contract. the Quotation Package Shall Include The Following Line Items In A Written Quotation: (fy 2025): Contract Line Item Number: Clin 0001, Rental Of Conference Space – Quantity 4 Days Each (see Below List Of Conference Space Requirements), Unit Price $ , Total Clin 0001 $ ; clin 0002, Food And Beverage Services (see Below List Of Food And Beverage Requirements, Unit Price $ Per Person Rate Per Day, Unit Price $ , Total For Clin 0002, $ . clin 0003, Rental Of Audio Visual Equipment And Technical Support – Quantity 4 Days Each (see Below List Of Audio Visual Requirements), Unit Price $ , Total For Clin 0003 $ ; clin 0004, Business Services Expenses – 4 Days (see Below List Of Business Services Requirements), Unit Price $ ____, total For Base Period Clin 0004 $ . Total Price For Clins 0001 Through 0004: $ the Preferred Dates For Consideration In Order Of Preference June 1-june 5, 2025 (1st Choice), June 8-june 12, 2025, (2nd Choice), And July 13-july 17, 2025 (3rd Choice). please Indicate Availability For Each Date In The Technical Portion Of The Quotation. No Other Dates Or Combination Of Dates Will Be Considered By The Government. the Conference Provides For Meeting Space For Training Sessions, Along With Food And Beverage Service For Buffet Breakfast, Buffet Lunch, And Morning And Afternoon Breaks. Registration Starts Monday From 8:30am To 4:30pm Et. The Conference Starts Tuesday And Wednesday 7:30 Am To 6:00 Pm Et, Thursday, 7:30am To 1:30pm Et. a Contract Will Be Awarded To The Responsible Quoter Whose Quotation Represents The Best Value To The Government. The Prospective Contractor Must Be Registered In The System For Award Management (sam) Database At The Time The Quotation Is Submitted. Registration Is Free And Can Be Completed On-line At Http://www.sam.gov. Each Quotation Must Clearly Indicate The Capability Of The Quoter To Meet The Requirements Specified In This Combined Synopsis/solicitation. general Requirements: The Following Requirements For The Training Facility Are Specified In Terms Of Minimum Requirements. Accessibility: Americans With Disabilities Act (ada) Requirements: All Facilities, Including Training Rooms And Rest Rooms And Audio-visual Equipment, Must Be Fully Accessible To Individuals With Disabilities In Compliance With The Americans With Disabilities Act Amendments Act. Accommodations For Disabled Individuals May Include, But Are Not Limited To, Accessible Parking Spaces, Elevators, Adequate Sound Systems, Wide Aisles And Wheelchair Ramps. A Site Visit May Be Conducted By The Disability Business And Technical Assistance Centers (dbtac) Prior To The Award Of The Contract. Parking: There Must Be Adequate Free Or Low Cost On-site Parking For All Participants. Confirmation Policy: The Eeoc Anticipates The Need For Sleeping Rooms On Sunday Through Thursday. Eeoc Will Require The Hotel Contact Person To Provide A Listing Of Registered Participants With Reserved Sleeping Rooms Prior To The Lodging Date To Verify The Rooming List As It Develops. Amendments And/or Substitutions May Be Necessary. description Of Facility And Minimum Requirements the Following Requirements For Lodging And Conference Space Are Minimum Requirements: Lodging: Guest Rooms Shall Be Located Onsite. The Facility Shall Be Centrally Located Within No More Than Three Blocks Walking Distance Of Area Retail, Restaurants, And Attractions. The Contractor Shall Provide A List Of All Local Restaurants Within A Ten-minute Walk From The Contractor’s Facility. lodging Payment Arrangements: Participants Will Contact The Hotel Individually To Obtain Room Scheduling And Shall Be Responsible For Payment Of Individual Guest Rooms And All Incidental Charges Upon Checkout. Payment Amount For Lodging Cannot Exceed, On A Daily Basis, The Maximum Per Diem Rate In Effect In Accordance With The Federal Travel Regulations Including Taxes, Gratuities, And Other Costs. Charges For Incidental Expenses Such As Telephone Charges And Room Service Will Be The Responsibility Of Individual Guests. local Transportation: The Contractor Shall Also Provide A List Of Options For commuting From And To All Airports And Railroad Stations (if Applicable) Within The area. If The Contract Facility Provides Shuttle Service, Contractor Shall Indicate If the Service Is Free Or What The Fee Is For The Service. Also, Indicate If The Shuttle service Is Wheelchair Accessible. room Rate: The Contractor Shall Provide The Sleeping Rooms For Eeoc Staff And Presenters At Or Below The Federal Government’s Domestic Per Diem Rate Which Is Available On-line At Http:/www.gsa.gov. The Facility Will Not Require Advance Payment From Conference Participants Covering The First Night Of Lodging. Guest Rooms Shall Be Located Within The Same Building As The Meeting Rooms. guest Rooms: Individual Travelers Will Schedule And Pay For Their Guest Room Nights. The Schedule And Range Of Guest Rooms Anticipated For This Conference Are As Follows: sunday, 35 Sleeping Rooms monday, 250 Sleeping Rooms tuesday, 250 Sleeping Rooms wednesday, 250 Sleeping Rooms thursday, 65 Sleeping Rooms friday, 0 Sleeping Rooms clin 0001 – Conference Space – Meeting Facilities: All Meeting Rooms Shall Be Wheelchair Accessible. The Meeting Facility Shall Be Available For Consecutive Nights And Consecutive Days As Specified Below: conference Will Be Held Monday Through Thursday On The Dates Provided Previously. the Following Meeting Spaces/rooms Shall Be Available Throughout The Conference: registration Area: Registration Area Shall Be Near The Main Plenary Room(s) And Will Include Two Skirted Eight-foot Tables, Configured As Follows: Two Tables Next To Each Other To Accommodate Training Materials. The Facility Shall Provide Signage Identifying The Conference Location Within The Hotel. Set Up Shall Be Completed By 12:00 P.m. Et On Monday. The Registration Area Must Remain Set Up And Available Throughout The Duration Of The Conference. secured Office/working Room: A Secure Office Or Working Room Is Needed Where Conference Materials Can Be Assembled, Sorted, And Stored. This Will Also Be Used As A Work Area For Staff. The Room Must Include At Least Two Six-foot Tables And Trash Receptacles. Telecommunication Requirements Include Electrical Outlets And Internet Access. two Plenary Meeting Rooms: Large Plenary Meeting Room Shall Accommodate Up To 250 People Set In Classroom Style With No More Than Two People Per Six-foot Tables Or 3 People Per Eight-foot Tables Which Are Covered And Skirted. Spacing Between Rows Of Seating Shall Be sufficient For Easy Wheelchair Access. Two Six-foot, Covered And Skirted Head Tables On A Stage With Four Moveable Chairs And Podium With Microphone. The Stage Shall Have Steps With A Handrail On One Side And Shall Be Wheelchair Accessible With A Low To Moderate Incline. The Tables Shall Include Writing Paper, Pens, And Water With Glasses For The Participants At The Start Of The Morning And Refreshed For The Afternoon Sessions. There Shall Be Sufficient Space At The Back Of The Room To Place Additional Chairs, If Needed. Room Will Be Available Between 7:30 Am – 6:00 Pm Et On Tuesday And Wednesday, And 7:30 Am – 1:30 Pm Et On Thursday. medium Plenary Meeting Room Shall Accommodate Up To 100 People Set In Classroom Style With No More Than Two People Per Six-foot Tables Or 3 People Per Eight-foot Tables Which Are Covered And Skirted. Spacing Between Rows Of Seating Shall Be Sufficient For Easy Wheelchair Access. two Six-foot, Covered And Skirted Head Tables On A Stage With Four Moveable Chairs And Podium With Microphone. The Stage Shall Have Steps With A Handrail On One Side And Shall Be Wheelchair Accessible With A Low To Moderate Incline. The Tables Shall Include Writing Paper, Pens, And Water With Glasses For The Participants At The Start Of The Morning And Refreshed For The Afternoon Sessions. There Shall Be Sufficient Space At The Back Of The Room To Place Additional Chairs, If Needed. Room Will Be Available Between 7:30 Am – 6:00 Pm Et On Tuesday And Wednesday, And 7:30 Am – 1:30 Pm Et On Thursday. breakout Rooms: Four Breakout Rooms To Accommodate At Least 65 People Each, Set In Classroom Style With No More Than Two People Per Six-foot Table Or 3 People Per Eight-foot Table Which Are Covered And Skirted Or Round Tables Of 6-8 People Per Table. Each Table Shall Contain Writing Paper, Pens, Ice Water With Glasses, Candy Or Mints For Participants. Tables Shall Be Refreshed For Afternoon Sessions. All Chairs Shall Be In Working Order, Free From Soil And Able To Move Easily. There Shall Be Enough Space Between Tables To Maneuver A Wheelchair. The Hotel May Provide The Large Plenary Meeting Room And Medium Plenary Meeting Room As Two Of The Four Breakout Rooms. All Breakout Rooms Will Be Available 7:30 Am – 6:00 Pm Et On Tuesday And Wednesday, And 7:30 Am – 1:30 Pm Et On Thursday. small Group Meeting Room: This Meeting Room Shall Accommodate Up To 30 People Set In A U-shape Style With Tables That Are Covered And Skirted. The Tables Shall Include Writing Paper, Pens, And Water With Glasses For The Participants At The Start Of The Morning And Refreshed For The Afternoon Sessions. There Shall Be Sufficient Space At The Back Of The Room To Place Additional Chairs, If Needed. Room Will Be Available 8:00 Am – 7:00 Pm Et On Monday; 7:30 Am – 6:00 Pm Et On Tuesday And Wednesday; And 7:30 Am – 6:30 Pm Et On Thursday. all Meeting Rooms Must Have A Suitable Sound System So All Participants May Hear And Ask Questions Of The Speakers. Both Meeting Rooms Should Be Arranged Classroom Style With Chairs And Tables For Writing And Handouts. All Chairs And Tables Shall Be In Acceptable Condition (the Furniture Is Not Broken, Soiled, Rusted Or Damaged In Any Way That Would Injure The Individual Or Damage Clothing). Aisle Space, Including The Space Between Tables And Desk, Need To Be Accessible For Persons In A Wheelchair. Walls Should Be Constructed In Such A Manner That They Confine Inside Sound And Reduce Or Prevent The Transmission Of Extraneous Sound. Both Rooms (including Luncheon Area) Should Be Equipped With A Working Sound System Which May Be Controlled By The Speaker And Which Projects Equally To All Areas Of The Room. Rooms Should Be Configured To Allow Every Participant A Clear View Of The Speaker And All Visual Aids. Each participant Should Have A Clear View Of At Least One Of The Projection Screens In Use. Rooms Should Be Well Lit To Accommodate Extensive Reading And Writing And All Lighting Should Be Uniform And Should Not Produce A Glare. Heating And Air Conditioning Should Provide A Comfortable Level Of Air Quality And Room Temperature When Rooms Are At The Maximum Capacity. Rooms Should Be Refreshed After Each Session And Debris Removed. clin 0002 – Food And Beverage Service: Buffet Breakfast To Be Served On Tuesday, Wednesday, And Thursday Between [approximate Time Of Service: 7:30 A.m. And 9:00 A.m. Et] And To Include A Protein (such As Eggs And/or Meat), A Potato Dish, Assorted Pastries, Breakfast Breads, Bagels And Cream Cheese, Sliced Fresh Fruit And Yogurt, Freshly Brewed Coffee, Decaffeinated Coffee, Tea, Hot Water And Assorted Fruit Juices. morning Break To Be Served On Tuesday, Wednesday And Thursday Between [approximate Time Of Service: Tbd] And Shall Include, At A Minimum Refresher Of Coffee, Tea And Water. buffet Luncheon To Be Served On Tuesday And Wednesday Between [approximate Time Of Service: 11:45 A.m. And 1:15 P.m. Et]. Buffet Shall Be Set Up Outside The Large Plenary Meeting Room And Individuals Will Be Permitted To Bring Food Back Into The Large Plenary Meeting Room For Consumption. Typical Lunch Must Consist Of Chicken Or Comparable Entree, Seasonal Vegetables (an Offering Sufficient To Serve As Main Meal For Vegetarians And Vegans), A Starch, Bread Or Rolls/butter, Dessert, Juices, Coffee, Decaffeinated Coffee And Iced Tea. Please Provide Recommended Lunch Buffet Menus, With Prices Per Person Served With Regular And Decaffeinated Coffee, Water And Tea (iced Or Hot). afternoon Break Is To Be Served On Tuesday And Wednesday Between [approximate Time Of Service: Tbd] To Include Assorted Drinks, Bottled Water, Herbal Teas Along With A Snack That May Consist Of Cookies And/or Brownies, Whole Fruit, Or Chips. Provide Recommended List Of Beverages And Snacks And Their Related Prices. small Group Food And Beverage – Only Needed On Monday And Thursday Afternoon [approximate Time Of Service: Tbd]. The Estimated Number Of People Receiving This Service Is Up To 30 People And Is Subject To Change. small Group Breakfast To Be Served On Monday Between [approximate Time Of Service: 7:30 a.m. And 9:00 A.m. Et] And To Include A Protein (such As Eggs And/or Meat), A Potato Dish, Assorted Pastries, Breakfast Breads, Bagels And Cream Cheese, Sliced Fresh Fruit And Yogurt, Freshly Brewed Coffee, Decaffeinated Coffee, Tea, Hot Water And Assorted Fruit Juices. Please Provide Recommended Breakfast Menus, With Prices Per Person Served. small Group Luncheon To Be Served On Monday Between [approximate Time Of Service: 11:45 a.m. And 1:15 P.m. Et]. Typical Lunch Must Consist Of Chicken Or Comparable Entree, Seasonal Vegetables (an Offering Sufficient To Serve As Main Meal For Vegetarians And Vegans), A Starch, Bread Or Rolls/butter, Dessert, Brewed Coffee, Decaffeinated Coffee, Juices And Iced Tea. Please Provide Recommended Lunch Menus, With Prices Per Person Served. small Group Afternoon Break Is To Be Served On Monday [approximate Time Of Service: Tbd Et] To Include Assorted Drinks, Bottled Water, Herbal Teas Along With A Snack That May Consist Of Cookies And/or Brownies, Whole Fruit, Or Chips. Provide Recommended List Of Beverages And Snacks And Their Related Prices. small Group Afternoon Break Is To Be Served On Thursday [approximate Time Of Service: Tbd Et] To Include Assorted Drinks, Bottled Water, Herbal Teas Along With A Snack That May Consist Of Cookies And/or Brownies, Whole Fruit, Or Chips And A Hot Or Cold Food Item. Provide Recommended List Of Beverages, Snacks And Hot Or Cold Food Item And Their Related Prices. quoter Should Also Submit An All-day Food And Drink Package With A Per Person Rate Per Day. All Food And Beverage (f&b) Services Need To Be Located In Areas Accessible To Individuals With Disabilities. The Luncheon Should Be Arranged So That All Individuals Can Be Seated And Served Sufficiently. pricing For Food And Beverages Shall Include The Price For The Item(s), Plus The Gratuity (service Charge), And A Statement From The Contractor Indicating Whether The U.s. Government Is Exempt From State Tax, If Applicable. The Eeoc Is A Tax Exempt Federal Agency; Please Do Not Include Any Sales Tax In Quotations For Which The Federal Government Is Exempt. the Contracting Officer Representative (cor) Will Contact The Contractor Within 72 Hours Of The Event To Confirm The Number Of Participants. The Contractor Shall Provide Food And Beverage For A Minimum Of 250 Participants Each Day. The Contractor Shall Invoice The Eeoc At The Agreed Upon Rates For Meeting Room Rental, Audio Visual Equipment, Food And Beverages, And Business Services. Charges For Food And Beverage Service Shall Be Reflected On The Invoice As The Cost Incurred Per Person. clin 0003 – Rental Of Audio Visual Equipment And Technical Support: The Following Services And Audiovisual Equipment Will Be Required: large Plenary Meeting Room – Needed On Tuesday, Wednesday And Thursday. podium With Wired Microphone; Laptop Computer With Internet Connection [1 Each] hand-held Cordless Microphone [2 Each] table Top Microphone For Table Next To Podium [3 Each] mixer With Sufficient Tracks To Amplify Speech And Sound Audible To Entire Audience Gathered In The Meeting Room. projection Package Linked To Podium Laptop Computer. projection Screens Appropriate For Size Of Meeting Room [2 Each] av Package (movable Cart, Power Cord And Power Strip) technical Assistance In Setting Up All Equipment, Including Splitters In Order To Assure That All Registrants Can Hear And See All Presentations. equipment And Av Package Including A Technician To Enable Live Streaming Of Plenary Speaker(s) To Audience Participating Remotely. av Technician To Monitor And Maintain Speech And Sound At Audible Levels During Meetings Held In Meeting Space. medium Plenary Meeting Room – Needed On Tuesday, Wednesday And Thursday. podium With Wired Microphone; Laptop Computer With Internet Connection [1 Each] hand-held Cordless Microphone [2 Each] table Top Microphone For Table Next To Podium [3 Each] mixer With Sufficient Tracks To Amplify Speech And Sound Audible To Entire Audience Gathered In The Meeting Room. projection Package Linked To Podium Laptop Computer. projection Screens Appropriate For Size Of Meeting Room [2 Each] av Package (movable Cart, Power Cord And Power Strip) technical Assistance In Setting Up All Equipment, Including Splitters In Order To Assure That All Registrants Can Hear And See All Presentations. av Technician To Monitor And Maintain Speech And Sound At Audible Levels During Meetings Held In Meeting Space. breakout Room(s) – Needed On Tuesday, Wednesday And Thursday. If Hotel Only Provides Two Additional Breakout Rooms, Hotel Will Allow For Large Plenary And Medium Plenary Rooms To Be Repurposed For The Use Of Serving As Breakout Rooms. requirements For Room: podium With A Hand-held Wireless Microphone That Can Attach To The Podium. [1 Each] projection Screen Appropriate For Size Of Meeting Room [1 Each] av Package (movable Cart, Power Strip And Cord). small Group Meeting Room – Needed On Monday And Thursday. Requirements For Room: projection Screen Appropriate For Size Of Meeting Room [1 Each] projection And Av Package To Allow For Laptop To Be Connected And Projected On To Screen. the Contractor Must Submit A Detailed Pricelist For The Audio-visual Equipment And Technical Support, Including High Speed Wireless (wi-fi) Internet Access, And Electrical connections. Also, Include The Price For The Items, Inclusive Of An Hourly Rate And The Number Of Labor Hours With Breaks Included In A Day Rate For Audio Visual Support Services (if Needed), Plus The Gratuity/service Charge. clin 0004 – Business Services. Wi-fi Access For Presenters In Meeting Spaces: High Speed Wi-fi Connectivity For Presenters In All Meeting Spaces (large Plenary, Medium Plenary, Breakout Rooms, Small Group Meeting Room, Secured Office/working Room). business Center: Business Office Support (copying, Faxing, Etc.) May Be Required Throughout The Conference. Hotel Must Provide A Pricing List For Copying, Faxing, Shipping, And Receiving Charges For The Hotel To Include Any Surcharges And Taxes. receipt And Storing Of Materials: The Hotel Shall Have Procedures And Facilities In Place To Receive And Store All Conference Materials Shipped In Overnight Mail. Charges For This Service Shall Be Included In The Business Center Charges. pre-conference Meeting And Conditions: A Pre-conference Meeting Either Via Telephone, Zoom/teams, Or In-person To Be Held At The Contractor’s Facility To Discuss The Objectives Of The Conference, Meet Staff Responsible For Implementing The Contract And Address Any Questions Regarding Elements Of The Statement Of Work, Within A Mutually Agreed Upon Time Prior To The Start Of The Conference. signage: Signs And Floor Plans Directing Participants To The Meeting Rooms Shall Be Provided By The Facility. This Shall Include A Daily Electronic Announcement Board, Announcing The 2025 Joint Eeoc-fepa-tero Training Conference. The Electronic Board Shall Easily Be Visible To Participants And Identify Meeting Room Locations. other: It Is Anticipated That Some Additional And/or Miscellaneous Expenses Might Be Incurred During The Conference Such As Service And Set Up Charges, Electrical Hook-up Fees, And Other Necessary But Unpredictable Expenses Which May Arise During The Conference. All Anticipated Charges For Additional Work Or Deliveries Of Requirements Outside Of Those Stated In The Government Contract Must Be Approved By The Cor And Communicated To The Government’s Contracting Officer In Writing Prior To Acceptance Of The Related Invoice And Payment Processing. the Facility Shall Agree To Allow The Eeoc To Bring In Audio-visual And Other Equipment And Connect These To The Facility’s Audio Visual/public Address System, As Necessary. Reporting Requirements pre-award Reporting: In Their Quotation, The Quoter Must Submit A Detailed Breakdown Of All Cost To Include Lodging Rates, Meeting Space, Food And Beverage, Av Equipment, Labor And Service Costs, And Any Other Miscellaneous Charges, Which Are Necessary For The Success Of The Conference. Prior To Conference Reporting: The Contractor Will Provide The Designated Eeoc contact With Online Access To Hotel Reports With Information About Confirmed Room Reservations Or An Electronic List Of All Hotel Confirmation Numbers For All Participants, Staff And Presenters On A Weekly Basis Prior To The Conference. during Conference Reporting: In Addition To Pre-conference Meeting, There Will Be A Daily Reconciliation Of All Charges Incurred With The Eeoc Designated Representative. The Charges Will Include Food And Beverage, Av Equipment And Labor, Telecommunication And Business Center Charges. post Conference: The Contractor Shall Submit A Final Invoice Covering All Charges Within Five (5) Business Days After The Completion Of The Conference. The Contractor Shall Submit A Detailed Report With The Invoice That Consist Of The Following: Room Usage By Date And Attendee, Detailed Av Charges By Meeting Room And A Detailed Breakdown By Day For All Food And Beverage Charges And A Grand Total By Category For Reconciliations Of The Event. Period Of Performance period Of Performance-the Base Period Is From Date Of Award Through Execution Of The Fy 2025 Joint Fepa-tero Conference. contract Administration-inspection And Acceptance the Contracting Officer’s Representative (cor) Under The Resulting Contract Shall Be Designated At The Time Of The Contract Award. method Of Payment: The Preferred Payment Method Is Payment By Government-wide Commercial Purchase Card. The Contractor Is To Apply Charges To Government Purchase Card Only After Final Invoice Has Been Accepted And Reconciled By The Cor. cancellation: Should Eeoc Elect To Cancel This Contract, Eeoc Will Provide A Written Notification To The Contractor No Later Than Sixty (60) Calendar Days Prior To The Scheduled Event. By Receipt Of This Cancellation Notice, The Contractor Agrees To Release Eeoc From Any Cancellation Penalties Or Charges. If There Is A Cancellation Within Sixty (60) Calendar Days Of The Scheduled Event Date, Paragraph (l) Termination For The Government’s Convenience Or (m) Termination For Cause Of Far Clause 52.212-4, Contract Terms And Conditions - Commercial Items Will Govern. submission Of Quotation: All Interested Parties Shall Submit With Their Quotation A Detailed Breakdown Of All Costs To Include Conference Space, Rental Of Audiovisual Equipment And Technical Support, Food And Beverage Service, Business Services, And Any Other Miscellaneous Services And Equipment Which Are Necessary For The Success Of The Seminar. In Addition, A Price Quotation Utilizing Attachment 1, Quotation Response Form, Shall Be Included. Quotations Shall Be Submitted In Three (3) Separate Volumes As Follows: Volume 1 - Technical Capability; Volume 2 - Past Performance; And Volume 3 - Price. Pricing Must Be Submitted Using The Line Item Structure In The Above Schedule Of Supplies And Services Of This Rfq. A Separate Attachment May Be Included In Volume 3 For Pricing Information On Menu Items, Transportation, Parking, Applicable Tax Rates, And Sleeping Room Rates. Your Quotation In Response To Rfq 45310025q0008 Is Due January 17th, 2025 At 12:00 P.m. Et. Quotations Will Be Accepted Via E- Mail. If Electronic Copy Of The Quotation May Be Submitted Via E-mail, Addressed To Melisza.coates@eeoc.gov. questions: Questions Regarding This Request For Quotation Should Be Submitted To Melisza Coates, Contract Specialist Via E-mail At Melisza.coates@eeoc.gov. Telephone Inquiries Or Responses Are Not Acceptable. The Deadline For Submission Of Questions Regarding 45310025q0008 Is January 10, 2025, 12:00 P.m. Et. Any Questions Received After The Above Mentioned Date And Time Will Not Be Considered. The Government Will Not Reimburse Interested Parties For Any Cost Associated With Responding To This Business Opportunity. All Responsible Sources May Submit A Quotation Which Shall Be Considered By The Agency. The Anticipated Contract Award Date Is On Or Before February 28, 2025. basis For Award: The Government Intends To Award A Firm Fixed-price Contract To The Responsible Quoter Whose Quotation Is Responsive To The Solicitation And Is Determined To Be The Best Value To The Government, Using The Tradeoff Approach. Selection Of The Best Value To The government Will Be Achieved Through A Process Of Evaluating The Strengths And Weaknesses Of Each Quoter’s Quotation Against The Below Described Evaluation Criteria. In Determining The Best Value To The Government, The Technical Capability And Past Performance Evaluation Criteria, When Combined, Are More Important Than The Evaluated Price. The Government Is More Concerned About Obtaining A Superior Technical Capability Quotation Than Making An Award At The Lowest Evaluated Price. However, The Government Will Not Make An Award At A Price Premium It Considers Disproportionate To The Benefits Associated With The Evaluated Superiority Of One Technical And Management Quotation Over Another. Thus, To The Extent That Quoter’s Technical And Past Performance Quotations Are Evaluated As Close Or Similar In Merit, The Evaluated Price Is More Likely To Be A Determining Factor. evaluation Factors For Award: The Following Factors Shall Be Used To Evaluate Quotations. These Factors Are Listed In Their Relative Order Of Importance: Technical Capability, Past Performance, And Price. factor I – Technical Capability: contract Requirements quotations Will Be Evaluated On The Quoter’s Ability To Provide All The Contract Requirements Regarding Meeting Space, Food And Beverage, Audio-visual Equipment And Technical Support, Lodging, And Secured Storage. Quotations Must Address The Quoter’s Ability To Meet Ada Requirements For Accessibility As It Relates To Meeting Space, Lodging And Parking. Quotations Will Be Evaluated On The Quality Of The Customer Services Provided, The Layout Design And Quality Of The Facilities As Reflected By The Physical Layout And Atmosphere Of Meeting Space, Amenities Such As Free Wi-fi In The Conference Space, And Upkeep Of The Facilities. location. Quotations Will Be Evaluated On The Ability Of The Quoter To Provide A Facility In Downtown Phoenix, Arizona With Adequate Low Cost Or Free On-site Parking For Participants And Presenters. availability Of Dates. Quoters Will Be Evaluated On The Ability Of The Quoter To Provide The Required Services On The Dates Requested. Additional Consideration Will Be Given To Quoters Who Can Provide The Required Services On The Preferred (1st Choice) Dates. availability Of Government Rates: Quotations Will Be Evaluated On The Ability Of The Quoter To Provide The Required Lodging At Or Below The Government Rate Or Market Value For All Conference Participants And Presenters. meeting Space: Quotations Will Be Evaluated On The Ability Of The Quoter To Provide The Required Meeting Spaces Within The Statement Of Work. factor Ii – Past Performance: the Quoter Must Provide References For A Minimum Of Three (3) Government Or Non-government Contracts Which Provide The Same Or Similar Services; Contract Must Have Been Awarded Within The Past (3) Years. The Information For Each Reference Shall Include The Following: name And Address Of Government Agency And Other Non-government Client; name, Title, Email And Telephone Number Of Contracting Officer Or Other Point Of Contact; name, Title, Email And Telephone Number Of Client’s Program Manager, If Applicable; contract Number, Period Of Performance, And Total Dollar Value Of Contract; And description Of Services Provided. list Any Problems Encountered On Each Contract And The Contractor’s Corrective Actions. eeoc Will Evaluate Past Performance Based On Timeliness, Customer Service And Corrective Actions Taken (if Necessary). A Quoter Without A Record Of Relevant Past Performance Or For Whom Information On Past Performance Is Not Available Will Not Be Evaluated Favorably Or Unfavorably On Past Performance. factor Iii – Price: the Price Quotation Will Be Evaluated Against The Independent Government Price Estimate. Evaluation Of Quotations Will Consider The Following Pricing Information: Pricing Provided For All Line Items Listed In The Schedule Of Supplies And Services Of This Solicitation In The Units And Format Provided. supplemental Agreements – If Any Hotel Submitting A Quotation Has Any Supplemental Agreements, Those Agreements Must Be Submitted With Their Quotation. If The Hotel Requires Signature Of A Supplemental Agreement That Was Not Submitted With The Quotation, The Quotation Will Be Rejected. site Visits: The Eeoc Reserves The Right To Conduct A Site Visit Of All Quoters Who Are Rated To Be Technically Acceptable. The Site Visit Will Review And Evaluate The Same Technical Items Identified In The Technical Capabilities Portion Of The Technical Evaluation Factors. notice: The Government Intends To Evaluate Quotations And Make Award Without Discussions (except Clarifications As Described In Far 15.306(a)). Therefore, The Quoter’s Initial Quote Should Contain The Vendor’s Best Terms From A Price And Technical Standpoint. The Government Reserves The Right To Conduct Discussions, If The Contracting Officer Later Determines Them To Be Necessary. The Government Also Reserves The Right To Conduct A Site Visit Prior To Award. applicable Provisions And Clauses: The Provisions At 52.212-1, Instructions To Offerors – Commercial Products And Commercial Services Applies To This Acquisition. 52.212-2, Evaluation-commercial Products And Commercial Services, The Vendor Shall Include A Completed Copy Of The Provisions At 52.212-3, Offeror Representations And Certifications - Commercial Products And Commercial Services With Your Quote. The Clause 52.212-4, Contract Terms And Conditions-commercial Products And Commercial Services And Clause 52.212-5 Contract Terms And Conditions Required To Implement Statues Or Executive Order-commercial Products And Commercial Services, Clause 52.203.6, Restrictions On Subcontractor Sales To The Government, Clause 52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreement Or Statement, Clause 52.204-23, Prohibition On Contracting For Hardware, Software And Services Developed Or Provided By Kaspersky Lab Covered Entities, Clause 52.204-25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment, Clause 52.204-10 Reporting Executive Compensation And First –tier Subcontract Awards, Clause 52.209-6, Protecting The Government’s Interest When Subcontracting With Contractor’s Debarred, Suspended, Or Proposed For Debarment, Clause 52.209.10, Prohibition On Contracting With Inverted Domestic Corporations, Clause 52.222- 3 Convict Labor, Clause 52.222-19 Child Labor – Cooperation With Authorities And Remedies, Clause 52.222-21, Prohibition Of Segregated Facilities, Clause 52.222-26 Equal Opportunity, Clause 52.222-35 Equal Opportunity For Veterans, Clause 52.222-36 Equal Opportunity For Workers With Disabilities, Clause 52.222-37 Employment Reports On Veterans, Clause 52.222-40, Notification Of Employee Rights Under The National Labor Relations Act, Clause 52.222-41, Service Contract Labor Standards, Clause 52.222- 50 Combating Trafficking In Persons, Clause 52.222-52, Exemption From Application Of The Service Contract Labor Standard To Contracts For Certain Services-certification, Clause 52.226-8 Encouraging Contractor Policies To Ban Texting Messaging While Driving, Clause 52.225-13 Restrictions On Certain Foreign Purchases, Clause 52.232-33, Payment By Electronic Funds Transfer – System For Award Management Are Incorporated By Reference, Clause 52.232-40, Providing Accelerated Payments To Small Business Subcontractors. Clause 52.233-3 Protest After Award And Clause 52.233-4 Applicable Law For Breach Of Contract Claim. to Obtain The Above Provision/clauses In Full Text, Please Visit Https://www.acquisition.gov/far. Method Of Payment: Electronic Funds Transfer. rev. 004_10-01-2018

Details: Sources Sought sources Sought Notice this Sources Sought Notice Is For Informational And Planning Purposes Only And Shall Not Be Construed As A Solicitation Or As An Obligation Or Commitment By The Government. This Notice Is Intended Strictly For Market Research. This Is A Sources Sought Request Only. This Is Not A Solicitation For Proposals, Proposal Abstracts, Or Quotations. the Department Of Veterans Affairs Visn 10 Network Contracting Office 10, Serving Indiana, Michigan, And Ohio Va Medical Centers, Is Conducting A Market Survey To Help Determine The Availability And Technical Capability Of Qualified Service-disabled Veteran-owned Small Businesses, Veteran-owned Small Businesses, Small Businesses, And/or Hubzone Small Businesses Capable Of Serving The Needs Identified Below. This Sources Sought Notice Is For Open Market As Well As Federal Supply Schedule Services. the Purpose Of This Notice Is To Gain Knowledge Of Potential Qualified Sources And Their Size Classification/socioeconomic Status (service-disabled Veteran Owned Small Business, Veteran Owned Small Business, Women Owned Small Business, Hub Zone, 8(a), Small Business, Or Large Business), Relative To Naics 621320. Responses To This Notice Will Be Used By The Government To Make Appropriate Acquisition Decisions. A Solicitation Is Not Currently Available. If A Solicitation Is Issued, It Will Be Announced On The System For Award Management (sam) Federal Business Opportunities Website Https://sam.gov/content/home At A Later Date, And All Interested Parties Must Respond To That Solicitation Announcement Separately From The Responses To This Announcement. your Responses To The Information Requested Will Assist The Government In Determining The Appropriate Acquisition Method, Including Whether A Set-aside Is Possible. please Note That This Is Not A Request For Proposal; No Solicitation Exists At This Time. project Requirments: background the Visn 10 Va Medical Facilities Have A Need To Purchase Nonpersonal Services To Provide Optical Dispensing For The Va Medical Centers (vamc), Community Based Outpatient Clinics (cbocs), And Other Clinics Located Through The State Of Ohio And Its Surrounding States. the Visn 10 Va Medical Facilities Are Seeking To Procure Optical Dispensing Services That Can Meet Or Exceed Our Required Specifications. As A Result Of This Sources Sought And Market Research, A Solicitation Will Be Publicly Posted To Sam.gov As Well As Sent To Interested Vendors Regarding This Requirement. The Goal Of This Sources Sought Is To Establish If There May Be Any Small Business Vendors That Can Satisfy This Requirement. Please Advise If You Can Provide The Service. Please Submit All Information To Contract Specialist Thomas Bellamy Via E-mail At Thomas.bellamy@va.gov No Later Than 3:00 P.m. Eastern Daylight Time On Tuesday, January 28, 2025. anticipated Period Of Performance: March 26, 2025, Through March 25, 2026, With One (1) Option Year. the Intended Delivery Period Is To Be Determined. confidentiality Of Information in Accordance With Far 52.227-14(b), The Contractor Shall Guarantee Strict Confidentiality Of The Information/data That It Is Provided By The Government During The Performance Of The Contract. The Government Has Determined That The Information/data That The Contractor Will Be Provided During The Performance Of The Contract Is Of A Sensitive Nature And Cannot Be Disclosed In Any Manner. the Contractor, In Whole Or In Part, Can Only Make Disclosure Of The Information/data, After The Contractor Receives Prior Written Approval From The Contracting Officer. Whenever The Contractor Is Uncertain With Regard To The Proper Handling Of Information/data Under The Contract, The Contractor Shall Obtain A Written Determination From The Contracting Officer. interested Firms Responding To This Sources Sought Notice Must Adhere To The Following: (a) Provide A Capability Statement Demonstrating Relevant Experience, Skills, And Ability To Fulfill The Government's Requirements For The Above. The Capability Statement Should Contain Sufficient Detail For The Government To Make An Informed Decision Regarding Your Capabilities; However, The Statement Should Not Exceed 10 Pages. (b) The Capability Statement Must Identify The Responder's Business Type And Size. (c) The Capability Statement Must Provide Company Name And Address, Point Of Contact, Phone/fax/email And Naics Code(s). (d) All Capability Statements Must Be Submitted To Contract Specialist Thomas Bellamy Via E-mail At Thomas.bellamy@va.gov No Later Than 3:00 P.m. Eastern Daylight Time On Tuesday, January 28, 2025. this Notice Is Not A Request For Proposals. This Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. The Government Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. Any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization S Qualifications To Perform The Work. Respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. After A Review Of The Responses Received, A Pre-solicitation Synopsis And Solicitation May Be Published In Sam. However, Responses To This Notice Will Not Be Considered Adequate Responses To A Solicitation. confidentiality: No Proprietary, Classified, Confidential, Or Sensitive Information Should Be Included In Your Response. The Government Reserves The Right To Use Any Non-proprietary Technical Information In Any Resultant Solicitation(s). a Determination By The Government To Proceed With The Acquisition As A Set-aside Is Within The Discretion Of The Government. If Capability Statements Are Not Received From At Least Two Responsible Businesses By The Response Date Or If The Government Determines That No Small Business Concerns Are Capable Of Performing This Requirement Based Upon An Evaluation Of The Capability Statements Submitted, The Government May Proceed With A Full And Open Competition. ohio Optical Dispensing Services part 1 general Information general: this Is A Nonpersonal Services Contract To Provide Optical Dispensing Services For The Va Medical Centers (vamcs), Community Based Outpatient Clinics (cbocs), And Other Clinics Located Through The State Of Ohio And Its Surrounding States. The Government Shall Not Exercise Any Supervision Or Control Over The Personnel Performing The Services Described Herein. Such Personnel Shall Be Accountable Solely To The Contractor Who, In Turn, Is Responsible To The Government. description Of Services/introduction: the Contractor Shall Provide All Personnel, Equipment, Supplies, Off-site Facilities, Transportation, Tools, Materials, Supervision, And Other Items And Nonpersonal Services Necessary To Fitting, Ordering, Adjusting, Conducting Minor Repairs, And Education For Dispensing Eyeglasses To Veterans In The Ohio Va Service Area, As Defined In This Performance Work Statement (pws), Except For Those Items Specified As Government-furnished Property And Services. The Government Will Provide Spaces For Performance, And Others Will Be Furnished By The Contractor (within 10 Miles And No Greater Than A 20-minute Drive From The Servicing Va Facility Address). background: the Veterans Integrated Service Network (visn) 10 Prosthetics Program Fabricates Eyeglasses For The Visn 10 Vamcs And Their Supporting Cbocs And Clinics. While The Eyeglasses Are Manufactured At The Visn 10/12 Optical Lab, Visn 10 Requires On-site Dispensing Services Or, Where There Is A Lack Of Clinic Space, Requires Off-site Dispensing Services. These Dispensaries Will Serve Various Functions. The Contractor Shall Provide All Labor, Equipment, Materials, Supplies, And Supervision Necessary For Eyeglass Dispensary Services, To Include Functions Such As Fitting, Ordering, Adjusting, Dispensing, Repairing (minor), And Education Of Veterans. 1.3 Scope Summary: the Government Intends To Enter Into One (or More) Indefinite Delivery Indefinite Quantity Contract(s) That Clearly Outline The Contractor S Obligations Regarding Ordering And Dispensing Eyewear To Veterans Within The Framework Of Established Va Guidelines And Practices. visn 10 Anticipates Awarding One (1) (or More) Firm-fixed Price Contract(s). The Awarded Contract(s) Will Contain One (1) Base Period And Two (2) Option Periods (see Price Schedule For Performance Periods). the Sites Covered By This Requirement Shall Include Vamcs, Cbocs, And Clinics, As Detailed In Section 1.5.5 Below. 1.4 Period Of Performance: to Be Determined. 1.5 General Information: 1.5.1 Quality Control: the Contractor Shall Develop And Maintain An Effective Performance Monitoring Plan To Ensure Services Are Performed In Accordance With This Pws. The Contractor Shall Develop And Implement Procedures To Identify, Prevent, And Ensure Non-recurrence Of Defective Services. 1.5.2 Quality Assurance: the Government Shall Evaluate The Contractor S Performance Under This Contract In Accordance With The Quality Assurance Surveillance Plan (qasp). This Plan Is Primarily Focused On What The Government Must Do To Ensure That The Contractor Has Performed In Accordance With The Performance Standards. It Defines How The Performance Standards Will Be Applied, The Frequency Of Surveillance, And The Minimum Acceptable Defect Rates. 1.5.3 Recognized Holidays: new Year S Day Labor Day martin Luther King Jr. S Birthday Columbus Day president S Day Veteran S Day memorial Day Thanksgiving Day juneteenth Independence Day Christmas Day independence Day **and Any Other Day Declared By The President Of The United States As A Federal Holiday** 1.5.4 Hours Of Operation: the Schedule Of Days And Hours Of Operation Shall Be Mutually Agreed Upon Between Contractor And Government. Section 4.0.3 Of This Pws Establishes The Minimum Number Of Days Of Operation Per Week At Each Location; The Contractor Shall Provide These Services On Weekdays. On The Days The Contractor Provides Optician Services, Said Services Shall Be Available During The Same Hours The Site (i.e., Vamc, Cboc, Or Clinic) Is In Operation Or Open For Appointments. For Those Sites Where Optician Services Are Provided Five Days Per Week, Monday Through Friday, If The Contracting Officer S Representative (cor) Determines The Volume Of Optical Orders Warrants Additional Coverage, The Contractor Shall Be Responsible For Providing Optician Services On Saturdays As Well. For Locations That Are Open Fewer Than Five Days Per Week, The Contractor Shall Establish Consistent Days And Hours Of Operation. Additionally, During The Weekdays In Which An Optician Is Not On-site, The Contractor Shall Make An Alternative Ordering Location Available To Veterans. The Contractor Is Not Responsible For Conducting Business On The Recognized Holidays Listed In Section 1.5.3, Or When The Government Facility Is Closed Due To Local Or National Emergencies, Administrative Closures, Or Similar Government-directed Facility Closures Or Moves. The Contractor Must At All Times Maintain An Adequate Workforce For The Uninterrupted Performance Of All Tasks Defined Within This Pws When The Government Facility Is Not Closed For The Reasons Discussed In This Section. An Adequate Workforce Includes Operating Hours As Well As Staffing Levels To Support Workload Demand. When Hiring Personnel, The Contractor Shall Keep In Mind That The Stability And Continuity Of The Workforce Are Essential To Successful Performance. 1.5.5 Place Of Performance: the Work To Be Performed Under This Contract Will Be Performed At/nearby*: chillicothe Vamc 17273 State Route 104, Chillicothe, Oh 45601 athens Cboc 510 West Union Street, Athens, Oh 45701 cambridge Cboc 2146 Southgate Pkwy., Cambridge, Oh 43725 lancaster Cboc 1550 Sheridan Drive, Suite 100, Lancaster, Oh 43130 portsmouth Cboc 840 Gallia Street, Portsmouth, Oh 45662 marietta Cboc 418 Colgate Drive, Marietta, Oh 45750 wilmington Outreach Clinic 448 West Main Street, Wilmington, Oh 45177 â  â  cincinnati Vamc 2929 Highland Avenue, Cincinnati, Oh 45220 bellevue Cboc 103 Landmark Drive, Suite 300, Bellevue, Ky 41073 florence Cboc 7310 Turfway Road, Suite 540, Florence, Ky 41042 hamilton Cboc 1755-c South Eire Highway, Hamilton, Oh 45011 lawrenceburg Cboc 1600 Flossie Drive, Greendale, In 47025 clermont County Cboc 4600 Beechwood Road, Cincinnati, Oh 45244 georgetown Cboc 474 Home Street, Georgetown, Oh 45121 â  â  louis Stokes Cleveland Vamc 10701 E. Boulevard, Cleveland, Oh 44106 akron Cboc 55 W. Waterloo, Akron, Oh 44319 canton Cboc 733 Market Avenue South, Canton, Oh 44702 new Philadelphia Cboc 1260 Monroe Avenue - Suite 1a, New Philadelphia, Oh 44663 lake County Va Cboc 35000 Kaiser Court, Willoughby, Oh 44094 east Liverpool/calcutta Cboc 15655 State Route 170 - Suite A, Calcutta, Oh 43920 lorain Cboc 5275 North Abbe Road, Elyria, Oh 44035 sandusky Cboc 1912 Hayes Avenue, Sandusky, Oh 44870 mansfield Cboc 1025 South Trimble Road, Mansfield, Oh 44906 youngstown Cboc 1815 Belmont Avenue, Youngstown, Oh 44505 parma Cboc 8787 Brookpark Road, Parma, Oh 44141 ravenna Cboc 6751 N. Chestnut St, Ravenna, Oh 44266 warren Cboc 1460 Tod Ave Nw, Warren, Oh 44485 chalmers P. Wylie Ambulatory Care Center (acc) 420 N. James Road, Columbus, Oh 43219 newark Cboc 1855 W. Main Street, Newark, Oh 43055 grove City Cboc 5775 N. Meadows Drive, Grove City, Oh 43123 zanesville Cboc 2800 Maple Avenue, Zanesville, Oh 43701 marion Cboc 1203 Delaware Avenue, Marion, Oh 43224 â  dayton Vamc 4100 W. Third Street, Dayton, Oh 45428 lima Cboc 1303 Bellefontaine Avenue, Lima, Oh 45804 richmond Cboc 1010 N. J Street, Richmond, In 47374 springfield Cboc 512 South Burnett Road, Springfield, Oh 45505 middletown Cboc 4337 North Union Road, Middletown, Oh 45005 *these Locations May Change Throughout The Life Of The Contract As The Needs Of The Va Change. This Contract Covers Any Site Moves Or Government-furnished Space Changes Deemed Fair And Reasonable By The Administrative Contracting Officer (co). 1.5.6 Type Of Contract: the Government Intends To Award One (or More) Indefinite Delivery Indefinite Quantity Contract(s). 1.5.7 Security Requirement And Background Checks: the Contractor Shall Be Given Beneficiary Information That May Include The Veteran S Name, Residential Address, Telephone Number, And Social Security Number. Beneficiary Information Is Confidential And Is Protected Under The Privacy Act Of 1974 And The Healthcare Insurance Portability And Accountability Act Of 1996 (hipaa). Any Individual Making Unauthorized Disclosures May Be Criminally Liable For Violations Under The Acts. The Contractor Shall Not Use Or Further Disclose Beneficiary Information In A Manner That Would Violate The Federal Privacy And Confidentiality Statutes. The Contractor Shall Receive Privacy Training Before Performance Begins On This Contract And Annually Thereafter Through The Va S Training Management System (tms). Completion Certificates Shall Be Faxed To The Cor. Any Electronic Communication That Includes Hipaa Information Shall Be Done Through Pki Encrypted E-mail. once Tms Training Is Completed And Training Certificates For The Required Information Security And Privacy Training Courses Are Provided To The Cor, And The Visn 10 Unified Access Request Form Has Been Submitted By The Cor, The Contractor May Be Granted Access To The Veterans Health Information System Technology Architecture (vista) And/or Previous Prescription Data Needed For Prescriptions, Troubleshooting Fitting, Etc. The Appropriate Access Is Determined By The Cor. the Contractor Shall Maintain Positive Control Over Any Government-issued Items, Including But Not Limited To The Following: keys government Computers sample Eyeglass Frames fax Machines (where Applicable) all Items And Government Areas Shall Be Secured When Not In Use. 1.5.8 Special Qualifications: vendor Will Be Qualified To Educate And Assist The Veterans In The Proper Choice, Use, And Care Of Their Eyewear. In Addition To Frame Selection, The Vendor Will Be Responsible For All Measurements And Fitting Of Eyewear. Appropriate State Licensure/certifications Will Be Required If Deemed Necessary By The State Where The Vamc, Cboc, Or Clinic Is Located. Vendor Shall Provide Appropriate Professional Business License(s) Within The State Or States Required Per Each Facility Serviced. Vendor Shall Also Comply With Any Other Federal, State, And Local Law Applicable To The Industry. 1.5.9 Post Award Conference/periodic Progress Meetings: the Contractor Agrees To Attend Any Post Award Conference Convened By The Contracting Activity, In Accordance With Federal Acquisition Regulation Subpart 42.5. The Co, Cor, And Other Government Personnel, As Appropriate, May Meet Periodically With The Contractor To Review The Contractor's Performance. At These Meetings, The Co Will Apprise The Contractor Of How The Government Views The Contractor's Performance And The Contractor Will Apprise The Government Of Problems, If Any, Being Experienced. Appropriate Action Shall Be Taken To Resolve Outstanding Issues. These Meetings Shall Be Attended At No Additional Cost To The Government. 1.5.10 Contracting Officer S Representative (cor): the Cor Will Be Identified By Separate Letter. The Cor Monitors All Technical Aspects Of The Contract And Assists In Contract Administration. The Co Will Issue A Letter Of Delegation To The Cor And A Copy Will Be Provided To The Contractor. This Delegation Will State The Responsibilities And Limitations Of The Cor. The Cor Is Not Authorized To Change Any Of The Terms And Conditions Of The Contract. 1.5.11 Key Personnel: the Follow Personnel Are Considered Key Personnel By The Government: contracting Officer contracting Officer S Representative a Prosthetics And Sensory Aids Service (psas) Representative Will Be Located At Each Of The Vamc Facilities. The Contact Information For The Psas Representative Will Be Provided To The Contractor Upon Contract Award. A Psas Representative Has The Exclusive Responsibility For Determining Eligibility And Necessity For Va Prosthetic Goods And Services (e.g., Eyeglasses). The Psas Representative Also Coordinates And Resolves Problems Related To Such Goods And Services. Any Matter That Cannot Be Resolved By A Psas Representative Will Be Referred To The Cor. Any Matter Than Cannot Be Resolved By A Cor Will Be Referred To The Co. the Contractor Shall Provide A Contract Manager Who Shall Be Responsible For The Performance Of The Work. The Name Of This Person And An Alternate Who Shall Act For The Contractor When The Manager Is Absent Shall Be Designated In Writing To The Co. The Contract Manager Or Alternate Shall Have Full Authority To Act For The Contractor On All Contract Matters Relating To Daily Operation Of This Contract. The Contract Manager Or Alternate Shall Be Available During Regular Working Hours, Monday Through Friday (and Saturday, If Applicable At The Location) Except On The Recognized Holidays Listed In Section 1.5.3 Or When The Government Facility Is Closed Due To Local Or National Emergencies, Administrative Closures, Or Similar Government-directed Facility Closures Or Moves. 1.5.12 Identification Of Contractor Employees: all Contract Personnel Attending Meetings, Answering Government Telephones, And Working In Other Situations Where Their Contractor Status Is Not Obvious To Third Parties Are Required To Identify Themselves As Such To Avoid Creating An Impression In The Minds Of Members Of The Public That They Are Government Officials. They Must Also Ensure That All Documents Or Reports Produced By Contractors Are Suitably Marked As Contractor Products Or That Contractor Participation Is Appropriately Disclosed. All Contract Personnel Shall Wear Identification On The Outside Of Their Attire While Under Performance Under This Contract. The Identification Tag Shall Indicate That He Or She Is A Contractor And Include His Or Her First And Last Name. These May Be Either Government (contractor Personal Identity Verification) Or Contractor-issued Identification Tags. 1.5.13 Contractor Required Dress Code: all Employees Involved In The Performance Under This Contract Shall Dress In Accordance With The Policies Of The Vamc, Cboc, And/or Clinics At Which They Perform Under The Contract. part 2 definitions & Acronyms 2.0 Definitions And Acronyms 2.0.1 Definitions: acceptable Quality Level (aql). The Aql Expresses The Allowable Variation From The Standard That Will Result In An Acceptable Level Of Quality (100% Unless Otherwise Stated) That Is The Maximum Allowable Error Rate Or Variation From The Standard. contractor. A Supplier Or Vendor Awarded A Contract To Provide Specific Supplies Or Service To The Government. The Term Used In This Contract Refers To The Prime. contracting Officer. A Person With Authority To Enter Into, Administer, And/or Terminate Contracts, And Make Related Determinations And Findings On Behalf Of The Government. The Co Is The Only Individual Who Can Legally Bind The Government. contracting Officer S Representative (cor). An Employee Of The U.s. Government Appointed By The Co To Administer The Contract. Such Appointment Shall Be In Writing And Shall State The Scope Of Authority And Limitations. This Individual Has Authority To Provide Technical Direction To The Contractor As Long As That Direction Is Within The Scope Of The Contract, Does Not Constitute A Change, And Has No Funding Implications. This Individual Does Not Have Authority To Change The Terms And Conditions Of The Contract. dispensed: Prosthetic Devices Will Be Considered Dispensed When The Veteran Has Been Contacted For Pick-up Or The Device Has Been Mailed. If The Contractor Is Unable To Make Contact With The Veteran On The First Attempt, The Contractor Shall Make A Documented Second Attempt Within Five (5) Business Days. After Two Failed Attempts To Reach The Veteran Via Telephone, The Contractor Shall Send A Letter To The Veteran Informing Him Or Her The Eyeglasses Are Ready For Pickup. defective Service. A Service Output That Does Not Meet The Standard Of Performance Associated With The Performance Work Statement. key Personnel. Contractor Personnel That Are Evaluated In A Source Selection Process And That May Be Required To Be Used In The Performance Of A Contract By The Key Personnel Listed In The Pws. When Key Personnel Are Used As An Evaluation Factor In Best Value Procurement, An Offer Can Be Rejected If It Does Not Have A Firm Commitment From The Persons That Are Listed In The Proposal. quality Assurance. The Government Procedures To Verify That Services Being Performed By The Contractor Are Performed According To Acceptable Standards. quality Assurance Surveillance Plan (qasp). An Organized Written Document Specifying The Surveillance Methodology To Be Utilized By The Government For Surveillance Of Contractor Performance. quality Control. All Necessary Measures Taken By The Contractor To Assure That The Quality Of An End Product Or Service Shall Meet Contract Requirements. shipped. For Items Shipped Directly To Veterans By The Va, Items Will Be Considered Shipped When The Contractor Receives The Shipping Manifest From The Va. For Items Shipped Directly To Veterans By The Contractor (i.e., Upgraded Eyeglasses), Items Will Be Considered Shipped When The Items Are Mailed Via The Postal/package Carrier (e.g., United Parcel Service (ups), Fedex, Or United States Postal Service (usps)). subcontractor. One That Enters Into A Contract With A Prime Contractor. The Government Does Not Have Privity Of Contract With The Subcontractor. workday. The Number Of Hours Per Day The Contractor Provides Services In Accordance With The Contract. work Week. Monday Through Friday, Unless Otherwise Specified. 2.0.2 Acronyms/abbreviations: acc Ambulatory Care Center aql Acceptable Quality Level aus Acquisition And Utilization Specialist cboc Community Based Outpatient Clinic co Contracting Officer cor Contracting Officer S Representative hipaa Health Insurance Portability And Accountability Act Of 1996 psas Prosthetics And Sensory Aids Service pws Performance Work Statement qa Quality Assurance qasp Quality Assurance Surveillance Plan qc Quality Control roe Remote Order Entry tms Training Management System vamc Veterans Affairs Medical Center visn Veterans Integrated Service Network vista Veterans Health Information System Technology Architecture part 3 contractor-furnished Items And Services 3.0 Contractor-furnished Items And Responsibilities: 3.0.1 Services: the Contractor Shall: provide All Labor (complying With Service Contract Act Wage Determinations), Equipment, Materials, Supplies, And Supervision. ensure All Of The Vendor S Employees Possess The Appropriate State Licensure/certifications Deemed Necessary By The Applicable State Law. provide Documentation Showing Initial Employee Orientation And On-going Training, Which Demonstrates The Employee S Knowledge, Experience, And Competence Are Appropriate For His/her Assigned Responsibilities. The Vendor Shall Document Assessment Of Employee Competency. As A Part Of The Employee S Initial Orientation, The Vendor Shall Provide An Orientation On The Va And On The Requirements Of This Contract. Training Topics Shall Cover All Aspects Of The Services Provided Under This Contract, Including Patient Confidentiality, Patient Safety And Risk Assessment, Hipaa, Remote Order Entry (roe), Vista, Communicating Safe Use And Care Of Equipment To Patients And Caregivers, And Infection Control Procedures. The Vendor Assures All Personnel Comply With All Current And Future Va Requirements Such As Safety, Ethics, And Hipaa, Required Of Business Associates, Which May Also Include Tms Training Assignments. ensure A High Degree Of Professionalism And Understanding Are Demonstrated When The Vendor S Employees Interact With Patients. The Vendor S Employees Are Expected To Be Discreet And Tactful And Demonstrate Concern, Compassion, And Patience. Some Patients Have Physical Disabilities Or Chronic Illnesses That Influence Their Behavior And Lifestyle. Verbal Or Physical Abuse, Or Unprofessional Behavior Or Conduct Toward A Patient And/or Caregiver, Will Not Be Tolerated. The Va Reserves The Right To Request The Removal Of Any Employee From Performance Of Services Under This Contract If His/her Behavior And/or Level Of Services Provided Are Not In Strict Accordance With The Requirements Of This Contract. ensure Vendor S Employees Provide Superior Customer Service And Answer All Patient Or Va Staff Inquiries No Later Than 5:00 P.m. The Following Business Day. make Employee Records, Including But Not Limited To Training Documentation, Available For Review By The Cor. This Request May Be Made During Visits To The Vendor S Facility, Or The Vendor May Be Requested To Submit The Documentation To The Cor S Location. The Vendor Shall Provide A List To The Cor That Identifies Employee S Location And The Type Of Services He/she Provides. The Initial List Shall Be Submitted 10 Days Prior To Performance Beginning Under The Contract. allow The Government To Perform Unannounced Site Visits To Any Vendor Facilities Or Off-site Locations At The Government S Discretion. ensure Professional Business Certifications/licensure Within The State(s) Required Per Each Facility Serviced. All Applicable Documentation Shall Be Provided To The Cor Prior To Each Employee Initiating Work In Accordance With The Contract And Annually Thereafter. 3.0.2 Materials: unless Provided By The Government At A Government Facility, The Contractor Shall Provide The Following: Furniture; A Lensometer; And Basic Tools And Materials For Adjusting And Completing Simple Repairs (e.g., To Nose Pads Or Screws, And Adjustments) To Eyeglasses At All Dispensing Locations Appropriate To The Size Of The Location And Estimated Quantity Of Customers. The Contractor Is Responsible For Display Boards, Equipment, And Tools Required For The Display Of Frames. The Government Will Provide Fax Machine And/or Printers At All Government Facilities Where Required (including To Any Location Without Roe Capabilities). The Contractor Is Responsible For Providing Fax Machines And/or Printers At All Off-site Locations. 3.0.3 Facilities: the Contractor Will Be Responsible For Providing Spaces/facilities To Perform Under The Contract For The Following Locations (within 10 Miles And No Greater Than A 20-minute Drive From The Servicing Va Facility Address): main Vamc location chillicothe athens Oh chillicothe cambridge Oh chillicothe lancaster Oh chillicothe marietta Oh chillicothe portsmouth Oh cincinnati greendale In cincinnati florence Ky cincinnati bellevue Ky cincinnati clermont Oh cincinnati hamilton Oh cincinnati georgetown Oh cleveland new Philadelphia Oh cleveland sandusky Oh cleveland east Liverpool Oh cleveland warren Oh cleveland ravenna Oh cleveland lorain Oh cleveland mansfield Oh columbus newark Oh columbus grove City Oh columbus marion Oh columbus zanesville Oh dayton lima Oh dayton richmond In dayton springfield Oh dayton middletown Oh *these Locations May Change Throughout The Life Of The Contract As The Needs Of The Va Change. This Contract Covers Any Site Moves Or Government-furnished Space Changes Deemed Fair And Reasonable By The Administrative Contracting Officer. **if Adequate Off-site Location Coverage Is Not Available, Vendor Is Responsible For Working With Cor To Determine Space And Needs Required To Perform Services On-site At Va Location. part 4 government-furnished Items And Services 4.0 Government-furnished Items And Responsibilities: 4.0.1 Equipment: the Government Will Supply The Following Equipment For Use Under The Contract: government Computer For Each Location sample Eyeglass Frames For Each Location fax Machines (as Needed) 4.0.2 Materials: the Government Shall Supply The Following Materials For Use Under The Contract: frame Selection Kit For Each Location 4.0.3 Facilities: the Va Will Provide Space At The Following Locations. Each Government-provided Space Listed Below Will Include Lights, Telephone, Climate Control, Desk, Office Chair, Patient Chair, Adequate Storage, Computer, And Secured Area. location estimate Of Total Number Of Eyeglasses For Ordering Period # 1 (base Year) minimum Required Days Of Operation Per Week akron Cboc 2,587 5 Daysâ  canton Cboc 2,587 5 Daysâ  lorain Cboc 1,360 2 Daysâ  mansfield Cboc 1,587 2 Daysâ  parma Cboc 2,668 5 Daysâ  youngstown Cboc 2,342 5 Daysâ  vamc Chillicothe 7,901* 5 Daysâ  vamc Cincinnati 9,730* 5 Daysâ  vamc Cleveland 9,168* 5 Daysâ  vamc Columbus 13,188* 5 Daysâ  vamc Dayton 10,390* 5 Daysâ  lake County Cboc 1,639 5 Daysâ  grove City Cboc 907 2 Daysâ  total Estimate For Ordering Period # 1 (base Year) 66,054 *denotes Locations Where Off-site Volume Was Included In Estimates **these Locations And Days Of Operation Requirements May Change Throughout The Life Of The Contract As The Needs Of The Va Change. This Contract Covers Any Site Moves Or Government-furnished Space Changes Deemed Fair And Reasonable By The Administrative Contracting Officer. part 5 specific Tasks 5.0 Specific Tasks: 5.0.1 Specific Task # 1: the Contractor Shall Provide The Following Services When Fitting For Or Dispensing Eyeglasses: vendor Shall Fit The Veteran With The Proper Frame Style For The Veteran And His/her Prescription. vendor Shall Determine The Pupillary Distance, Segment Height, And/or Optical Center Height. vendor Shall Troubleshoot Any Optical Issues Before Sending The Veteran Back To The Eye Clinic. vendor Shall Fit And Adjust Glasses For The Veteran. vendor Shall Perform Minor Repairs On Glasses (i.e., Adjust Nose Pads And Screws And Make Other Minor Adjustments). vendor Shall Educate Veterans On The Advantages And Disadvantages Of Different Segment Styles. vendor Shall Only Use Va Sample Frames As Sample/trial Frames. Sample Frames Shall Not To Be Sold Or Issued To Veterans Or Used For Repairs. vendor Shall Wash/sanitize Hands And All Sample Frames And Surfaces Used Between Each Patient With Va-approved Sanitizer As Part Of Infection Control Requirements. vendor Shall Be Required To Obtain Access To The Va S Roe And Enter Prescription And Patient Measurements Into The System. Vendor Shall Ensure That All Information Needed To Fabricate The Eyewear Is Included In The Roe. vendor Shall Be Required To Maintain A High Level Of Accuracy When Entering Orders Into Roe. Frequent Optician Errors Shall Be Addressed By The Vendor And Additional Training Shall Be Documented. vendor Shall Use The Va S Roe Unless It Is Not Available. For Off-site Vendors, The Off-site Vendor Shall Fax Orders To An On-site Vendor Location For Order Entry. Every Faxed Order Shall Include A Cover Sheet, Location, And Account Number If Not Using The Roe System. in The Event Roe Is Not Operational, The Vendor Shall Fax Orders To The Visnâ 10/12 Optical Lab Only On A Contingency Basis And Only With The Approval Of The Visn 10 Acquisition And Utilization Specialist (aus) Program Manager And/or Cor. vendor Shall Be Required To Obtain Access To Vista And Add A Comment To Veteran S Electronic Consult Indicating When The Veteran Ordered Glasses. as The Va S Electronic Health Record Program, Cerner, Is Implemented At Care Sites, Vendor Shall Be Required To Undergo Required Training To Gain Appropriate Access And Knowledge Of The System. During Training, The Optical Shop Hours May Be Reduced In Order To Fulfill Requirements For Go-live. once The Cerner System Is Implemented, The Vendor Shall Be Required To Maintain Appropriate Access And Follow Outlined Procedures To Ensure Accurate Eyeglass Processing. vendor May Not Batch Orders For More Than One Day. vendor Shall Respond To All Voicemail, My Healthevet Messages From Veterans, And Inquiries From Veterans, Family Members, Or Va Staff No Later Than 5:00 P.m. The Following Business Day. vendor Shall Offer A Retail Selection Of Frames, Lenses, And Add-on Options For Veteran To Choose From At Their Own Expense. if A Veteran Is Eligible For Eyewear, He/she Should Choose From The Collection Provided From The Visn 10/12 Optical Lab. Vendor Shall Not Attempt To Upgrade Eyewear By Soliciting Add-ons; The Add-ons Must Solely Be At The Request Of The Veteran And May Be Provided By The Vendor. Any Add-on Orders And Agreements Are Between The Veteran And The Vendor, And The Vendor Will Manufacture/supply The Upgraded Eyewear. vendor Awarded This Contract Must Enter Into An Agreement With The Veteran Canteen Service For Sale Of Goods On Government Property. This Agreement Will Include A Commission Payment On Retail Sales To The Veteran Canteen Service. This Refers To The Eyeglasses Sold To The Veteran That Are Not Part Of The Va Benefits. The Agreement With The Veteran Canteen Service Is A Requirement For Any Goods Sold At Va Facilities. vendor Shall Ensure That The Dispensary Is Open And Staffed During The Same Hours As The Servicing Eye Clinic, And For The Minimum Number Of Days Per Week Established In Section 4.0.3 Of This Pws. Vendor Shall Also Ensure Vendor Is Capable Of Providing Services To Patients Commensurate With The Government-provided Estimates. Each Site Should Be Staffed With The Appropriate Number Of Qualified Personnel To Provide Adequate Services To The Estimated Number Of Customers As Provided By The Government For Each Site. Dispensing Sites That Have Two Or More Personnel Shall Be Open During Lunch Period. Locations That Have One Personnel May Be Closed To Meet Legal Requirements For Lunch And Breaks. 5.0.2 Specific Task # 2: the Contractor Shall Conduct The Ordering, Delivery, And Inspection Functions Of The Eyeglasses In Accordance With The Following: the Visn 10/12 Optical Lab Will Ship All Completed Eyeglasses To The Appropriate Location And Include Packing Slips For Verification. If Discrepancies Are Found, The Vendor Must Notify The Visnâ 10/12 Optical Lab Within 24 Hours After Discovery Of The Discrepancy. the Va Reserves The Right To Ship Completed Eyeglasses Directly To The Veteran. Contractor Will Be Paid The Lower Rate When Eyeglasses Are Shipped Directly To The Veteran. vendor Will Notify The Veteran When Glasses Are Ready For Pick Up, No Later Than The Next Business Day After Delivery To The Dispensary. vendor Will Fit And Adjust On Site (preferred Method) Or Mail Glasses To The Veteran S Home If The Veteran Requests Them To Be Mailed. Vendor Will Be Responsible For All Shipping/mailing Costs Associated With Eyeglasses That Are Not Shipped Directly To The Veteran By The Va. The Vendor Shall Have A Confirmation Of Delivery (i.e., Ups, Fedex With Tracking Number, Or Usps-certified Mail (no Signature Required)). Regardless Of The Dispensing Method Chosen By The Veteran, The Vendor Will Document The Dispensing Date Or If Mailed, The Shipping Date In Vista Or Comparable Va Software Program. The Vendor Is Responsible For Tracking All Packages Until Delivery. any Packages Left In Status Other Than Delivered Are The Responsibility Of The Vendor To Resolve Within Seven (7) Business Days Of The Expected Delivery Date. vendor Will Provide The Local Prosthetic Service With A Copy Of The Visn 10/12 Optical Lab Invoice And An Invoice For Dispensing Fees. The Dispensing Fee Invoice Shall Be In Excel Format. The Invoice Must Be Typed And At Minimum, List The Veteran S Last Name, First Name, The Last Four Of His/her Social Security Number, Consult Number And The Date The Eyeglasses Were Dispensed To The Veteran Or Shipped. This Will Be Done For Each Individual Pair Of Eyeglasses Dispensed To The Veteran Or Shipped. vendor Is Responsible For Shipments Sent To The Visn 10/12 Optical Lab Including Patient Owned Frames. All Shipments Will Be Sent Via A Carrier That Can Be Tracked And Must Include A Packing Slip With Patient S Name, Last 4, Optical Shop Account Number, And A Detailed Description Of Items In The Shipment. vendor Shall Ensure That All Information Needed To Fabricate The Eyewear Is Included On The Order Form Sent To The Visn 10/12 Optical Lab No Later Than 5:00â p.m. The Following Workday. vendor Will Bring Any Quality Issues To The Attention Of The Visn 10 Aus Program Manager And/or Cor Within 24 Hours Of Receipt Of The Eyewear. vendor Will Receive The Prescription Consult From The Optometrist And Enter The Prescription And Patient Measurements Into The Roe System (where Available). Vendor Shall Ensure That All Information Needed To Fabricate The Eyeglasses Is Included In The Roe System. The Visn 10/12 Optical Lab Has Access To The Roe System. vendor Shall Use The Va S Roe System Unless It Is Not Available. Vendor S Third Party, Off-site Locations May Not Have Access To The Roe System. In Those Cases, The Third Party/off-site Vendor Shall Send Orders To The On-site Vendor S Location Of Choice And The On-site Vendor Will Be Responsible For Entering Into The Roe System. roe System Will Allow The Optician To View The Status Of The Eyeglasses, Including Whether They Have Been Dispensed Or Shipped. Vendor Can Enter Notes, Including But Not Limited To Special Instructions To The Lab Using The Roe System. 5.0.3 Specific Task # 3: the Contractor Shall Provide To The Cor Or Designee The Following Monthly Reports, Submitted Via Email, No Later Than Five (5) Business Days Following The End Of The Previous Month: patient Satisfaction Survey: A Survey Which The Contractor Is Required To Develop And Update As Needed. The Survey Will Be Approved By The Government Prior To Use. Contractor Shall Ensure A Minimum Of 50 Patients Per Month Complete The Survey At Each Location (vamc, Cbocs, And Clinics). timeliness Report: Measure Turnaround Times From Point Of Initial Contact (fitting) To Eyeglasses Being Dispensed. The Report Will Include At A Minimum The Following: the Location, Date Of Fitting, Optical Lab Order Date, Receipt Date From Optical Lab, And Date Dispensed/mailed To Patient. quality Report: Evaluate Any Issues With Eyeglass Frames, Lenses And Document The Findings, Recommendations And Actions Taken (this Report Addresses Common Problems With Eyeglasses Received From The Lab). part 6 attachment/technical Exhibit Listing 6.0 Attachment/technical Exhibit List 6.0.1 Attachment/technical Exhibit List Performance Requirements Summary: performance Requirements Summary performance Objective standard required Adherence Level the Contractor Shall Provide Services When Fitting For Or Dispensing Eyeglasses. all Customers Serviced (see Section 5.0.1 Of Pws) 100% the Contractor Shall Order, Accept Delivery, And Inspect All Eyeglasses Upon Receipt. all Orders (see Section 5.0.2 Of Pws) 98% the Contractor Shall Provide All Reports To The Government As Required. all Reports Received Within Five Business Days Of The End Of The Previous Month (see Section 5.0.3 Of Pws) 95% the Contractor Shall Provide All Completed Orders To The Optical Lab No Later Than 5:00 P.m. The Following Business Day. all Orders (see Section 5.0.2 Of Pws) 99% the Contractor Shall Respond To All Voicemails, My Healthevet Messages, And Inquiries From Veterans, Family Members, Or Va Staff No Later Than 5:00 P.m. The Following Business Day. all Customers Serviced (see Section 5.0.1 Of Pws) 100% the Contractor Shall Monitor Staff Compliance To Ensure Limited Optician Errors. all Orders (see Section 5.0.1 Of Pws) no More Than Two (2) Optician Errors Per Optician, Per Calendar Month disclaimer this Sources Sought Notice Is Issued Solely For Information And Planning Purposes Only And Does Not Constitute A Solicitation. All Information Received In Response To This Sources Sought Notice That Is Marked As Proprietary Will Be Handled Accordingly. Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Associated With Responding To This Sources Sought Notice.

Details: Description Invitation To Bid For The Supply And Delivery Of Various Common-used Office Supplies 1. The Department Of Agriculture - Regional Field Office 1 (da-rfo 1), Through The Gaa Fy 2025 Intends To Apply The Sum Of Six Million Two Hundred Ninety-four Thousand One Hundred Twenty-two Pesos And Fifty Centavos (php6,294,122.50) Being The Approved Budget For The Contract (abc) To Payment Under The Contract For The Supply And Delivery Of Various Common-used Office Supplies With Project Identification Number Da-rfo 1-2025-goods-033. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Da-rfo 1 Now Invites Bids For The Above-mentioned Procurement Project With The Following Details And Minimum Specifications, To Wit: Item No. Specifications Qty. Unit Unit Cost Total Cost 1 Automatic Voltage Regulator (avr), 3000w 4 Unit 5,500.00 22,000.00 2 Battery Charger For Aa & Aaa, With Aa Rechargeable Battery 54 Pc 1,700.00 91,800.00 3 Battery, Aa, Alkaline, 4pcs/pack 132 Pack 90.00 11,880.00 4 Battery, Aa, Rechargeable 2pcs/pack (2450 Mah) 63 Pack 700.00 44,100.00 5 Battery, Aaa, Alkaline 4pcs/pack 141 Pack 120.00 16,920.00 6 Battery, Aaa, Rechargeable 2pcs/pack (800 Mah) 9 Pack 500.00 4,500.00 7 Cfl Bulb 18 Watts 59 Pc 200.00 11,800.00 8 Extension Outlet 4 Gang W/ Switch (1.5m) 18 Unit 950.00 17,100.00 9 Flashlight, Rechargeable 5 Pc 400.00 2,000.00 10 Laser Pointer Presenter 7 Pc 800.00 5,600.00 11 Led, Lightbulb (daylight 9 Watt) 70 Pc 200.00 14,000.00 12 Tape, Electrical, 19mm X 16mm 32 Pc 60.00 1,920.00 13 Universal Extension Wheel (10m) 12 Unit 2,200.00 26,400.00 14 Universal Outlet Extension Cord, 6 Gang W/ Switch, 2-3 Meters Cord Length 17 Unit 1,200.00 20,400.00 15 Alcohol (500ml, Isoprophyl 70%) 343 Bot 110.00 37,730.00 16 Alcohol (gal, Isoprophyl 70%) 46 Gal 600.00 27,600.00 17 Ballpen, 0.5mm, Fine Black 4193 Pc 10.00 41,930.00 18 Ballpen, 0.5mm, Fine Blue 2616 Pc 10.00 26,160.00 19 Ballpen, 0.5mm, Fine Red 139 Pc 10.00 1,390.00 20 Ballpen, 0.7mm, Fine, Black 1188 Pc 12.00 14,256.00 21 Ballpen, 0.7mm, Fine, Blue 1142 Pc 12.00 13,704.00 22 Ballpen, 0.7mm, Fine, Red 50 Pc 12.00 600.00 23 Ballpen, Bp-s Fine, Black 679 Pc 25.00 16,975.00 24 Ballpen, Bp-s Fine, Blue 406 Pc 25.00 10,150.00 25 Ballpen, Bp-s Fine, Red 174 Pc 25.00 4,350.00 26 Bank Envelope (11 X 7 Inch) 75 Pc 3.50 262.50 27 Bond Paper, (11"x17") Tabloid Size, Subs 24 / 80 Gsm 20 Ream 550.00 11,000.00 28 Bond Paper, (8.5x11) Letter, Subs 20 / 70 Gsm 78 Ream 280.00 21,840.00 29 Bond Paper, (8.5x11) Letter, Subs 24 / 80 Gsm 49 Ream 320.00 15,680.00 30 Bond Paper, (8.5x13) Legal, Subs 20 / 70 Gsm 686 Ream 300.00 205,800.00 31 Bond Paper, (8.5x13) Legal, Subs 24 / 80 Gsm 490 Ream 350.00 171,500.00 32 Bond Paper, A3, Subs. 20 / 70 Gsm 50 Ream 465.00 23,250.00 33 Bond Paper, A3, Subs. 24 / 80 Gsm 20 Ream 530.00 10,600.00 34 Bond Paper, A4, Subs 20 / 70 Gsm 904 Ream 290.00 262,160.00 35 Bond Paper, A4, Subs 24 / 80 Gsm 558 Ream 330.00 184,140.00 36 Book Ends, Metal 5 Pair 200.00 1,000.00 37 Carbon Paper, Long 2 Pack 195.00 390.00 38 Cartolina, White, 20pcs/pack 15 Pack 90.00 1,350.00 39 Certificate Holder, A4 Size W/ Plastic Cover 623 Pc 50.00 31,150.00 40 Clear Folder, Morocco Long, Blue 30 Book 22.00 660.00 41 Clear Folder, Morocco Short, Blue 10 Book 20.00 200.00 42 Clearbook Refil, 20 Holes, 10pcs/pack 10 Pack 50.00 500.00 43 Clip Board, Data Board. 8.5"x11" 22 Pc 90.00 1,980.00 44 Clip Board, Data Board. 8.5"x13" 148 Pc 100.00 14,800.00 45 Clip, Bulldog 2" 344 Pc 8.00 2,752.00 46 Clip, Bulldog 3'' 324 Pc 15.00 4,860.00 47 Colored Paper 8 1/2 X 11" 10's/pack 22 Pack 30.00 660.00 48 Colored Paper, A4, Light Blue 37 Ream 200.00 7,400.00 49 Columnar Notebook, 10 Cols 10 Pad 35.00 350.00 50 Columnar Notebook, 12 Cols 18 Pad 35.00 630.00 51 Construction Paper (assorted) 10 Sheets Per Pack 40 Pack 30.00 1,200.00 52 Corkboard, 2x3 Ft 2 Pc 900.00 1,800.00 53 Corkboard, 3ft X 4 Ft 1 Pc 2,000.00 2,000.00 54 Correction Pen 70 Pc 20.00 1,400.00 55 Correction Tape 5mm X 8m 562 Pc 30.00 16,860.00 56 Cotton (500 Grams) 1 Roll 150.00 150.00 57 Crayons, 8 Colors 12 Pack 20.00 240.00 58 Cutter Blade, Big 12 Box 30.00 360.00 59 Cutter, Heavy Duty 46 Pc 100.00 4,600.00 60 Dating And Stamping Machine, Self Inking (dated 2024 And Up) 42 Pc 500.00 21,000.00 61 Envelope, Ordinary, Long Brown 1525 Pc 4.00 6,100.00 62 Envelope, Ordinary, Short Brown 243 Pc 3.00 729.00 63 Eraser (for Pencil) 161 Pc 15.00 2,415.00 64 Expanding Envelope, Kraft, Legal Size 335 Pc 15.00 5,025.00 65 Expanding Envelope, Hard Plastic With Garter (pvc Type), Legal Size 76 Pc 90.00 6,840.00 66 Expanding Envelope, Plastic Long (thick) 230 Pc 35.00 8,050.00 67 Expanding Envelope, Plastic Long With Handle 355 Pc 90.00 31,950.00 68 File Box W/ Cover (blue) 233 Pc 410.00 95,530.00 69 File Box W/ Cover (red) 136 Pc 410.00 55,760.00 70 File Rack, 3 Layers, Heavy Duty 24 Pc 500.00 12,000.00 71 Film Index (with Sign Here Note) 219 Pack 55.00 12,045.00 72 Film Index Rainbow Color 158 Pack 45.00 7,110.00 73 Folder Expanding, Legal Size (green, Glossy) 1574 Pc 18.00 28,332.00 74 Folder Expanding, Short (green, Glossy) 50 Pc 15.00 750.00 75 Folder Long Ordinary, Kraft, Thick 1196 Pc 6.00 7,176.00 76 Folder Long Ordinary, White, Thick 3869 Pc 6.00 23,214.00 77 Folder Plastic Clear W/ Slide (a4) (thick Plastic) 66 Pc 35.00 2,310.00 78 Folder Plastic Clear W/ Slide (legal) (thick Plastic) 178 Pc 40.00 7,120.00 79 Folder, Morocco, Legal (blue) Not Glossy 140 Pc 25.00 3,500.00 80 Folder, Morocco, Legal (green) Not Glossy 92 Pc 25.00 2,300.00 81 Folder, Morocco, Short (blue) Not Glossy 107 Pc 18.00 1,926.00 82 Folder, Morocco, Short (green) Not Glossy 35 Pc 18.00 630.00 83 Glue Gun Heavy Duty Big 8 Pc 360.00 2,880.00 84 Glue Stick, Big 102 Pc 12.00 1,224.00 85 Glue, Multi-purpose 240 Grams 12 Bot 150.00 1,800.00 86 Highlighter, Blue 55 Pc 40.00 2,200.00 87 Highlighter, Green 95 Pc 40.00 3,800.00 88 Highlighter, Orange 83 Pc 40.00 3,320.00 89 Highlighter, Pink 78 Pc 40.00 3,120.00 90 Highlighter, Yellow 91 Pc 40.00 3,640.00 91 I.d. Holder W/ Lace 4"x6" 100 Pc 45.00 4,500.00 92 Illustration Board, 1 Whole 15 Pc 70.00 1,050.00 93 Index Card (3"x5") 50s/pack 24 Pack 45.00 1,080.00 94 Laminating Film A4 Size 100pcs/pack 250 Mic 34 Pack 1,200.00 40,800.00 95 Lead, For Mechanical Pencil 0.5mm 12pc/tube 2 Tube 30.00 60.00 96 Lever Arch File, Blue, File Top, Size: Approx. (11 X 13.5 X 2.5 Inches) 20 Pc 195.00 3,900.00 97 Lever Arch File, Blue, Landscape, Size: Approx. (11 X 13.5 X 2.5 Inches) 40 Pc 195.00 7,800.00 98 Lever Arch File, Blue, Size: Approx. (15.5 X 9.5 X 3 Inches) 45 Pc 195.00 8,775.00 99 Magazine File Box (5"x9"x15-3/4") 60 Pc 110.00 6,600.00 100 Mailing Envelope, White, 500pcs/box 18 B0x 290.00 5,220.00 101 Manila Paper 1 Whole 276 Sheet 5.00 1,380.00 102 Marker Permanent Ink Refill 30ml, Black (pilot) 36 Bot 110.00 3,960.00 103 Marker Permanent Ink Refill 30ml, Blue (pilot) 32 Bot 110.00 3,520.00 104 Notebook (80 Leaves) 1040 Pc 45.00 46,800.00 105 Official Record Book (300 Pages) Aprox. Size: (8.5 X 11) 73 Book 250.00 18,250.00 106 Official Record Book (500 Pages) Aprox. Size: (8.5 X 11) 100 Book 280.00 28,000.00 107 Paper Cutter With Board, Wood Base, 12x15 3 Unit 1,200.00 3,600.00 108 Paper Cutter,steel Base W/ Ruler & Presser 15'x12' 1 Unit 2,000.00 2,000.00 109 Paper Fastener (plastic) 100 Box 40.00 4,000.00 110 Paper Fastener, (metal) 207 Box 70.00 14,490.00 111 Paper, Ruled Pad, 90 Leaves (yellow Pad) 35 Pad 45.00 1,575.00 112 Parchment Paper, Long, 10sheets/pack (cream) 48 Pack 35.00 1,680.00 113 Parchment Paper, Short, 10sheets/pack (cream) 58 Pack 30.00 1,740.00 114 Paste With Applicator, 200 Grams 4 Jar 80.00 320.00 115 Pencil With Eraser No.2 (12pcs/box) 212 Box 72.00 15,264.00 116 Pencil, Mechanical, 0.5mm Lead 56 Pc 47.75 2,674.00 117 Permanent Marker (black) (bullet Type) (super Color Marker) 225 Pc 45.00 10,125.00 118 Permanent Marker (black) (chisel Type) (super Color Marker) 174 Pc 55.00 9,570.00 119 Permanent Marker (blue) (bullet Type) (super Color Marker) 195 Pc 45.00 8,775.00 120 Permanent Marker (blue) (chisel Type) (super Color Marker) 117 Pc 55.00 6,435.00 121 Permanent Marker (red) (bullet Type) (super Color Marker) 57 Pc 45.00 2,565.00 122 Permanent Marker (red) (chisel Type) (super Color Marker) 70 Pc 55.00 3,850.00 123 Philippine National Flag, Size: 90cm X 150cm 12 Pc 102.00 1,224.00 124 Photo Paper, Glossy, A4, 20pcs/pack 67 Pack 150.00 10,050.00 125 Plastic Twine, One Kilo Per Roll 18 Roll 80.00 1,440.00 126 Puncher, Heavy Duty, 2 Holes 12 Unit 200.00 2,400.00 127 Push Pin, Hammer Head Type, Assorted Colors, 100s/box 13 Box 50.00 650.00 128 Ring Binder, 1" 5 Pc 45.00 225.00 129 Ring Binder, 1/2 " 5 Pc 20.00 100.00 130 Rotary Pencil Sharpener 2 Pc 300.00 600.00 131 Rubber Band, Large Size 15 Box 150.00 2,250.00 132 Ruler Metal 12 Inch 9 Pc 50.00 450.00 133 Ruler Plastic 12 Inch 5 Pc 20.00 100.00 134 Scissors Heavy Duty Big 8" (stainless) 63 Pair 120.00 7,560.00 135 Screw Fastener 3" 438 Pc 10.00 4,380.00 136 Screw Fastener 4" 357 Pc 12.00 4,284.00 137 Sign Pen V5, Black 415 Pc 55.00 22,825.00 138 Sign Pen V5, Blue 387 Pc 55.00 21,285.00 139 Sign Pen V5, Green 55 Pc 55.00 3,025.00 140 Sign Pen, 1.0mm, Black 177 Pc 75.00 13,275.00 141 Sign Pen, 1.0mm, Blue 146 Pc 75.00 10,950.00 142 Sign Pen, Black Pentel Gel Type 0.5 539 Pc 95.00 51,205.00 143 Sign Pen, Blue Pentel Gel Type 0.5 400 Pc 95.00 38,000.00 144 Specialty Board, Cream, 8.5x11, 10pcs/pack (b-board) 673 Pack 35.00 23,555.00 145 Specialty Board, Cream, 8.5x13, 10pcs/pack (b-board) 648 Pack 40.00 25,920.00 146 Specialty Board, White, 8.5x11, 10pcs/pack (b-board) 225 Pack 35.00 7,875.00 147 Specialty Board, White, 8.5x13, 10pcs/pack (b-board) 408 Pack 40.00 16,320.00 148 Stamp Pad Ink Black 50ml 13 Pc 45.00 585.00 149 Stamp Pad Ink Red 50ml 4 Pc 45.00 180.00 150 Stamp Pad Ink Violet 50ml 23 Pc 45.00 1,035.00 151 Stamp Pad Standard Size Black 7 Pc 40.00 280.00 152 Stamp Pad Standard Size Violet 4 Pc 40.00 160.00 153 Staple Wire #35 297 Box 40.00 11,880.00 154 Stapler, #35 Heavy Duty With Staple Remover 57 Unit 400.00 22,800.00 155 Stapler, Long Reach Heavy Duty 3 Unit 500.00 1,500.00 156 Sticker Paper (high Gloss, Inkjet Friendly 10sheets/pack) A4size 75 Pack 95.00 7,125.00 157 Sticker Paper (high Gloss, Inkjet Friendly 10sheets/pack), Long 123 Pack 100.00 12,300.00 158 Sticker Paper (high Gloss, Inkjet Friendly 10sheets/pack), Short 55 Pack 90.00 4,950.00 159 Sticky Notes (2"x1.5") 100 Sheets/pad 126 Pad 25.00 3,150.00 160 Sticky Notes (2"x2"), 100 Sheets/pad 141 Pad 30.00 4,230.00 161 Sticky Notes (3"x2"), 100 Sheets/pad 127 Pad 40.00 5,080.00 162 Sticky Notes (3"x3"), 100 Sheets/pad 222 Pad 40.00 8,880.00 163 Sticky Notes (3"x4), 100 Sheets/pad 158 Pad 50.00 7,900.00 164 Sticky Notes (3"x5"), 100 Sheets/pad 215 Pad 50.00 10,750.00 165 Super Glue / Shoe Glue 3 Grams 6 Pc 50.00 300.00 166 Super Permanent Marker, Fine Black (industrial) (sharpie) 35 Pc 90.00 3,150.00 167 Tape Dispenser, Heavy Duty (1") 9 Pc 150.00 1,350.00 168 Tape Double Sided Thin 24mm White 95 Pc 40.00 3,800.00 169 Tape Double Sided Adhesive W/ Foam Green, 2" 94 Roll 230.00 21,620.00 170 Tape Double Sided Adhesive W/ Foam Green, 1" 84 Roll 150.00 12,600.00 171 Tape Duct, Color Blue 2" 62 Roll 110.00 6,820.00 172 Tape Duct, Color Grey 2" 78 Roll 110.00 8,580.00 173 Tape, Masking, 1/2" 47 Roll 21.00 987.00 174 Tape, Masking, 24mm, 1", 100m 95 Roll 35.00 3,325.00 175 Tape, Masking, 48mm, 2", 100m 301 Roll 70.00 21,070.00 176 Tape, Packaging, 48mm, 2", 100m 88 Roll 55.00 4,840.00 177 Tape, Transparent, 24mm, 1", 100m 170 Roll 30.00 5,100.00 178 Tape, Transparent, 48mm, 2", 100m 126 Roll 52.00 6,552.00 179 Tracing Paper, Per Cut, 20x30, 8085 Thick 2 Pc 20.00 40.00 180 Whiteboard, 3ft X 4ft 7 Pc 2,000.00 14,000.00 181 Whiteboard, 5ft X 3ft 6 Pc 2,800.00 16,800.00 182 Air Freshener, 280ml (lemon Fresh) 163 Can 240.00 39,120.00 183 Air Freshener, Scented Gel, 180 Grams 98 Pc 220.00 21,560.00 184 Bathroom Cleaner (approx. 900ml) 29 Bot 300.00 8,700.00 185 Bathroom Soap, 90 Grams 16 Pc 50.00 800.00 186 Bleach Colored 1 Ltr 62 Bot 130.00 8,060.00 187 Bleach White 1 Ltr 63 Bot 100.00 6,300.00 188 Broom, Ceiling, Bamboo 23 Pc 170.00 3,910.00 189 Broom, Soft 5 Pc 170.00 850.00 190 Broom, Stick 14 Pc 40.00 560.00 191 Car Freshener 42 Grams, Organic Canister, Assorted Scent 63 Can 240.00 15,120.00 192 Detergent Bar, Long 12 Bar 80.00 960.00 193 Detergent Powder, W/ Fabric Conditioner 1kg 43 Pack 150.00 6,450.00 194 Dishwashing Liquid (250ml) 402 Bot 70.00 28,140.00 195 Disinfectant Spray, 170g 89 Can 280.00 24,920.00 196 Door Mat, Cloth Rectangle 105 Pc 60.00 6,300.00 197 Dust Pan, Plastic Big 2 Pc 80.00 160.00 198 Fabric Conditioner 800 Ml 14 Bot 250.00 3,500.00 199 Face Towel (cotton), Good Morning 159 Pc 30.00 4,770.00 200 Floor Mop With Bucket (360degrees Rotating Micro Fiber Head) 3 Set 1,500.00 4,500.00 201 Furniture Cleaner, 300ml 32 Can 300.00 9,600.00 202 Garbage Bag, Black, Gusseted Type Thick Plastic, 10's/roll, (small) 55 Roll 70.00 3,850.00 203 Garbage Bag, Black, Thick Plastic, 10's/pack, (large), Heavy Duty 145 Pack 100.00 14,500.00 204 Garbage Bag, Black, Thick Plastic, 10's/pack, (xl) Heavy Duty 37 Pack 130.00 4,810.00 205 Garbage Bag, Black, Thick Plastic, 10's/pack, (xxl) Heavy Duty 239 Pack 150.00 35,850.00 206 Garbage Bag, Black, Thick Platic, 10's/pack, (medium), Heavy Duty 168 Pack 80.00 13,440.00 207 Glass Cleaner, Big Sprayer Type 7 Bot 197.00 1,379.00 208 Glass Squeezer W/ Handle 1 Pc 125.00 125.00 209 Hand Sanitizing Gel, 60ml 15 Bot 60.00 900.00 210 Insecticide Spray (aerosol) 400ml 73 Can 350.00 25,550.00 211 Laundry Brush 4 Pc 30.00 120.00 212 Laundry Gloves (medium) 1 Pc 200.00 200.00 213 Liquid Handwash (antibacterial) 400ml 123 Bot 140.00 17,220.00 214 Microfiber, Cleaning Cloth 35cm X 35cm 47 Pc 60.00 2,820.00 215 Mop W/ Squeezer (squeez Mop) 26 Pc 350.00 9,100.00 216 Pail W/ Cover (16l) 18 Pc 200.00 3,600.00 217 Paper Towel, Interfold 144 Pack 120.00 17,280.00 218 Push Brush (floor Brush) 20 Pc 130.00 2,600.00 219 Scrub Sponge, Heavy Duty 116 Pc 60.00 6,960.00 220 Scrubbing Pads, Heavy Duty 25 Pc 40.00 1,000.00 221 Table Napkin, Pre Folded 13 Pack 100.00 1,300.00 222 Tissue Paper, 2-ply, 12 Rolls/pack 422 Pack 180.00 75,960.00 223 Tissue Paper, 3-ply, @ 4rolls/pack 213 Pack 160.00 34,080.00 224 Toilet Bowl Brush W/ Box 57 Pc 92.00 5,244.00 225 Toilet Bowl Pump 2 Pc 60.00 120.00 226 Toilet Deodorant Cake, 50 Grams 108 Pc 50.00 5,400.00 227 Trash Bin, Plastic W/ Cover, 11l Capacity 6 Pc 150.00 900.00 228 Trash Bin, Plastic W/ Cover, 25l Capacity 1 Pc 250.00 250.00 229 White Facial Tissue (200mmx200mm)2ply 210 Box 110.00 23,100.00 230 Cd Rewritable, 700mb 80min. W/ Case 603 Pc 50.00 30,150.00 231 Dvd-rewritable W/ Case 6 Pc 90.00 540.00 232 External Hard Drive (1 Tb) Usb 3.0 27 Unit 4,700.00 126,900.00 233 External Hard Drive, Ssd (1 Tb) Usb 3.0/type C 15 Unit 6,000.00 90,000.00 234 Flash Drive , Usb 16gb, Plug In Play 3 Pc 490.00 1,470.00 235 Flash Drive, 32gb Ultra Usb Driver (otg); Micro-usb & Usb Connectors 42 Pc 1,300.00 54,600.00 236 Flash Drive, Usb 32 Gb 31 Pc 1,000.00 31,000.00 237 Flash Drive, Usb 64 Gb 119 Pc 1,500.00 178,500.00 238 Hdmi Cable, 10m 5 Pc 600.00 3,000.00 239 Hdmi Cable, 5m 3 Pc 300.00 900.00 240 Keyboard, Usb Type 36 Pc 450.00 16,200.00 241 Keyboard, Wireless 5 Pc 600.00 3,000.00 242 Microsd Memory Card, 32gb 1 Pc 1,000.00 1,000.00 243 Microsd Memory Card, 64gb 2 Pc 1,800.00 3,600.00 244 Mouse Optical, (usb) 15 Pc 300.00 4,500.00 245 Mouse For Laptop, Optical 50 Pc 440.00 22,000.00 246 Mouse Optical, Wireless 21 Pc 630.00 13,230.00 247 Mouse Pad 119 Pc 30.00 3,570.00 248 Powerbank 10000mah 5 Pc 1,500.00 7,500.00 249 Powerbank 20000mah 50 Pc 2,500.00 125,000.00 250 Uninterruptible Power Supply (ups), 500va - 600va 12 Pc 4,500.00 54,000.00 251 Usb Hub, 3.0, 4 Port 5 Pc 500.00 2,500.00 252 Usb Lan Wireless Adapter 8 Unit 1,000.00 8,000.00 253 Wireless Usb Presenter 2 Unit 2,200.00 4,400.00 254 Ink Brother, Bt5000m, Magenta 36 Bottle 490.00 17,640.00 255 Ink Brother, Bt5000m, Yellow 36 Bottle 490.00 17,640.00 256 Ink Brother, Bt5000m, Cyan 41 Bottle 490.00 20,090.00 257 Ink Brother, Bt6000m, Black 30 Bottle 490.00 14,700.00 258 Ink Cartridge, Canon Cl-36, Colored (for Canon Mobile Printer) 13 Cart 1,600.00 20,800.00 259 Ink Cartridge, Canon Cl-811 Colored 3 Cart 2,000.00 6,000.00 260 Ink Cartridge, Canon Pg-35, Black (for Canon Mobile Printer) 10 Cart 1,100.00 11,000.00 261 Ink Cartridge, Canon Pg-810 (canon) 3 Cart 1,900.00 5,700.00 262 Ink Cartridge, Hp62, Black (hp Office Jet 200 Mobile Printer) 5 Cart 1,500.00 7,500.00 263 Ink Cartridge, Hp62, Tricolor (hp Office Jet 200 Mobile Printer) 5 Cart 1,800.00 9,000.00 264 Ink, Hp Gt 51 Black 2 Bottle 400.00 800.00 265 Ink, Hp Gt 52 Cyan 2 Bottle 400.00 800.00 266 Ink, Hp Gt 52 Magenta 2 Bottle 400.00 800.00 267 Ink, Hp Gt 52 Yellow 2 Bottle 400.00 800.00 268 Ink Epson T6731 Black (epson) 6 Bottle 800.00 4,800.00 269 Ink Epson T6732 Cyan (epson) 6 Bottle 800.00 4,800.00 270 Ink Epson T6733 Magenta (epson) 6 Bottle 800.00 4,800.00 271 Ink Epson T6734 Yellow (epson) 6 Bottle 800.00 4,800.00 272 Ink Epson T6735, Light Cyan (epson) 3 Bottle 800.00 2,400.00 273 Ink Epson T6736, Light Magenta (epson) 3 Bottle 800.00 2,400.00 274 Ink Epson, T6641, Black 70ml 22 Bottle 450.00 9,900.00 275 Ink Epson, T6642, Cyan 70ml 9 Bottle 450.00 4,050.00 276 Ink Epson, T6643, Magenta 70ml 13 Bottle 450.00 5,850.00 277 Ink Epson, T6644, Yellow 70ml 14 Bottle 450.00 6,300.00 278 Ink Epson, 001, Black 179 Bottle 700.00 125,300.00 279 Ink Epson, 001, Cyan 138 Bottle 600.00 82,800.00 280 Ink Epson, 001, Magenta 138 Bottle 600.00 82,800.00 281 Ink Epson, 001, Yellow 137 Bottle 600.00 82,200.00 282 Ink Epson, 003, Black 679 Bottle 500.00 339,500.00 283 Ink Epson, 003, Cyan 465 Bottle 500.00 232500 284 Ink Epson, 003, Magenta 483 Bottle 500.00 241,500.00 285 Ink Epson, 003, Yellow 451 Bottle 500.00 225500 286 Ink Epson, 008, Black 37 Bottle 1,200.00 44,400.00 287 Ink Epson, 008, Cyan 28 Bottle 900.00 25,200.00 288 Ink Epson, 008, Magenta 29 Bottle 900.00 26,100.00 289 Ink Epson, 008, Yellow 29 Bottle 900.00 26,100.00 290 Toner Cartridge, Fuji Xerox S1810/s2010/s2220/s2420 (ct201911) 3 Cart 5,400.00 16,200.00 291 Toner Cartridge, Fuji Xerox S2011/s2320/s2520 (ct202384) 1 Cart 5,400.00 5,400.00 292 Toner Cartridge, Hp Laserjet P1102, Ce285a (85a) 25 Cart 5,000.00 125,000.00 293 Toner Cartridge, Kyocera (tk 1175) Monochrome 4 Cart 9,500.00 38,000.00 294 Toner Cartridge, Sharp Ar-6026n (mx-238ft) 5 Cart 9,500.00 47,500.00 295 Toner Cartridge, Lexmark (mx321) 2 Cart 10,000.00 20,000.00 296 Hp Color Laserjet Toner 206a, Black 7 Cart 9,500.00 66,500.00 297 Hp Color Laserjet Toner 206a, Cyan 1 Cart 9,500.00 9,500.00 298 Hp Color Laserjet Toner 206a, Magenta 1 Cart 9,500.00 9,500.00 299 Hp Color Laserjet Toner 206a, Yellow 1 Cart 9,500.00 9,500.00 300 Ink Brother Btd60bk 8 Bottle 510.00 4,080.00 301 Certificate Holder, Legal Size W/ Plastic Cover 400 Pc 60.00 24,000.00 302 Specialty Board, Cream, A4 8.2x11.7, 10pcs/pack (b-board) 300 Pack 30.00 9,000.00 303 Specialty Board, White, A4 8.2x11.7, 10pcs/pack (b-board) 105 Pack 30.00 3,150.00 304 Ink Cartridge, Hp 682, Black 3 Cart 550.00 1,650.00 305 Ink Cartridge, Hp 682, Tri-color 3 Cart 550.00 1,650.00 306 Index Card (5"x8") 50s/pack 3 Pack 65.00 195.00 307 Screw Fastener 1" 200 Pc 7.00 1,400.00 308 Screw Fastener 2" 198 Pc 8.00 1,584.00 309 Plastic Fastener (5 Pcs/pack) Double Lock 220 Pack 25.00 5,500.00 310 Notebook, A6 Size, 200 Pages 115 Pc 60.00 6,900.00 311 Notebook, A7 Size, 200 Pages 100 Pc 50.00 5,000.00 312 Usb 3.1 Otg Flashdrive, Type C, 128 Gb 51 Pc 3,000.00 153,000.00 313 Notebook, A5 Size, Soft Leather Cover, 200 Sheets 80 Pc 200.00 16,000.00 314 Gel Ink Sign Pen, 0.4 100 Pc 90.00 9,000.00 315 Gel Ink Sign Pen, 0.3 100 Pc 90.00 9,000.00 316 Toner Cartridge, Fujifilm Apeos 2150 Nda 5 Cart 3,500.00 17,500.00 317 Whiteboard 2ft X 2 Ft 2 Piece 2,000.00 4,000.00 318 Clamp - Stapler Remover 5 Pcs 30.00 150.00 319 Portable Bluetooth/wireless Speaker With Trolley (free Microphone) 1 Unit 6,695.00 6,695.00 320 Dishwashing Liquid Diy Kit, Lemon Scent (for 15-16 Liters Output) 25 Set 400.00 10,000.00 321 Fabric Conditioner Diy Kit, Sunrise Fresh Scent (for 20 Liters Output) 25 Set 450.00 11,250.00 322 Liquid Handsoap Diy Kit, Antibac Scent (for 15-16 Liters Output) 25 Set 400.00 10,000.00 323 Sack For 50kls Capacity (size: 64cm X 104cm) 76 Pc 15.00 1,140.00 324 Printer Ribbon, Epson Lq 310 2 Cart 250.00 500.00 325 Stackable Storage Box With Cover And Wheels (155l) 3 Pcs 1,100.00 3,300.00 Total 6,294,122.50 Delivery Schedule: Delivery Schedule: Sixty (60) Working Days From Receipt Of Ntp Drop-off Point: Da-rfo 1, City Of San Fernando, La Union Delivery Of The Goods Is Required Within Sixty (60) Working Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm, Monday To Friday. Department Of Agriculture Regional Field Office 1 Aguila Rd., Sevilla, City Of San Fernando, La Union 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From January 7-27, 2025 From The Address Given And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php10,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Da-rfo 1 Will Hold A Pre-bid Conference On 14 January 2025, 3:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Above On Or Before 27 January 2025, 3:00 Pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 27 January 2025, 3:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union. Bids Will Be Opened In The Presence Of The Bidders Or Their Authorized Representatives. 10. Additional Instructions To Bidders: A. The Bidders Or Their Duly Authorized Representatives May Attend The Bid Opening; B. In Case A Representative Will Be Attending The Bid Opening, A Special Power Of Attorney (spa), Secretary’s Certificate, Board Resolution Or Any Other Forms Of Authorization (notarized), As The Case May Be, Together With The Company-issued Identification Card Or Any Valid Id Must Be Presented Upon Submission Of The Bid Proposal At The Bac Secretariat. The Name/title Of The Project Must Be Indicated In The Authorization Or Spa. C. Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. Bidders Shall Submit Their Bids With Proper Index Tabbing Using The Forms Specified In The Bidding Documents In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously; The First Component Which Is The Technical Eligibility Requirements Must Be Soft-bound, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Second Component Being The Financial Eligibility Requirements Can Be Fastened In A Folder, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Technical And Financial Requirement Each In Separate Envelopes, Shall Be Enclosed In A Mother Envelope With The Same Sealing And Markings. Non-compliance With Index Tabbings Shall Not Be A Ground For Outright Disqualification Or Declaration Of Ineligibility. The Improper Index Tabbings Must Be Duly Acknowledged By The Bidder/representative And Be Subject To The Bid Evaluation And Post-qualification Of The Technical Working Group (twg) As To Their Substance. D. All Documents In The Financial Requirements Envelope Must Be Duly Signed And/or Initialed By The Bidder/authorized Representative On Each And Every Page Thereof. 11. The Da-rfo 1 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And Section 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Dennis I. Tactac, Abe Chairperson, Bids And Awards Committee Department Of Agriculture - Regional Field Office 1 Aguila Road, Sevilla, City Of San Fernando, La Union Tel. No. :(072) 242/1045-46, Ext. 07 E-mail Add: Bacsec@ilocos.da.gov.ph 13. For Downloading Of Bidding Documents, You May Visit The Following Websites: Da-rfo 1 Website: Https://ilocos.da.gov.ph/ Philgeps Website: Https://www.philgeps.gov.ph/ January 6, 2025 Approved: (sgd.) Gilbert D. Rabara, Dvm Vice-chairperson, Bids And Awards Committee Invitation To Bid Identification No. Da-rfo 1-2025-goods-033

Details: Description Procurement Of Inclusive Learning Resource Centers Assistive Devices, Equipment, Supplies And Materials (lot 12-cookery Support Service Area: Skills Development) 1. The Deped Schools Division Of Eastern Samar, Through The General Appropriation Act Of 2024 Intends To Apply The Sum Of ₱ 442,032.83 Being The Abc To Payments Under The Contract For Procurement Of Inclusive Learning Resource Centers Assistive Devices, Equipment, Supplies And Materials (lot 12-cookery Support Service Area: Skills Development) Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Deped Schools Division Of Eastern Samar Now Invites Bids For The Above Procurement Project. Bidders Should Have Completed, Within 5 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 4. Prospective Bidders May Obtain Further Information From Deped Schools Division Office Of Eastern Samar And Inspect The Bidding Documents At The Address Given Below During Monday-friday, 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Php 500.00. It May Also Be Downloaded From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Nonrefundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Deped Schools Division Of Eastern Samar Will Hold A Pre-bid Conference On January 14, 2025, 10:00am At The Bac Office, Deped Schools Division Of Eastern Samar Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before January 28, 2025, 9:00am Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 28, 2025, 10:00am At The Given Address Below Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Only The Proprietor Or Authorized Representative May Be Allowed To Purchase Bidding Documents. Letter Of Intent (loi), Special Power Of Attorney (spa) (for Authorized Representative), And Drl (document Request List From Philgeps) Are Required Upon Purchase. 11. The Deped Schools Division Of Eastern Samar Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Items, Specifications, Quantity Of Delivery, And Abc: Chef’s Knife, Stainless Steel Chef Chopping Knife Household Kitchen Knife Size: 8 Inches Blade Material: 3cr14 High Carbon Stainless Steel Blade Handle: Pom Handle 5 Pieces Boning Knife, 6″ Boning Knife Chef’s Edge Handles Are Ergonomically Designed To Minimize Wrist Tension And Provide A Natural Fit. Heat Treatment Process Makes The Knives Extremely Sharp And Corrosion Resistance. Country Of Origin: Germany Blade Material: 3cr14 High Carbon Stainless Steel Blade Handle: Pom Handle 4 Pieces Oysters Knife, Material: Stainless Blade, Plastic Handle Size: 16 Cm Easily Pry Open Oyster/clam Shells Sharp, Beveled Blade 2 Pieces Cleaver Knife, Butcher Cleaver Knife With Ergonomic Design Highly Corrosion Resistant Stainless Steel Wooden Handle Handle Length Measures 5" Blade Length Measures 8" Long And 3.5" Wide Dishwasher-safe Blade Material: Stainless Steel Color: Stainless Steel Handle Material: Wood Blade Edge: Plain 2 Pieces Tenderizer (pin Tenderizer), Stainless-steel Prongs Break Down Tough Meat Fibers. Also Useful For Piercing Meats Before Marinating. Heavy-duty Spring-loaded Mechanism Controls Action Precisely. A Practical Solution For Turning A Tough Cut Of Meat Into A Delicious, Tender Piece Of Meat. Type: Meat Tenderizer Material: Stainless-steel, Abs Size: 5cm X 5.1cm X 19.4cm/1.97" X 2.01" X 7.64" (approx.) 2 Pieces Tenderizer (mallet Tenderizer), Material: Aluminum Weight:100g Size: Length: 19.5cm; Hammer: 4.5 * 4.5cm Integrated Aluminum Construction For Strength And Durability. There Are Two Sides. Use The Spiked Surface To Tenderize And The Flat Surface To Pound Meat. Ideal For Beef, Veal, Pork And Chicken, Etc. Package Content: 1x Two Side Meat Hammer 4 Pieces Skimmer, Fine, 6"x5"length Width 5" Handle: Length11 5/8 Material: Nickel-plated Stainless Steel Handle Material: Nickel Plated 4 Pieces Wire Skimmer, Small, 3" Diameter X 1"depth 13.75 Handle Length Material: Stainless Steel, Bamboo Handle 4 Pieces Skimmers, Spider, Mesh Basket Tool(5inches) Material:18/8 Stainless Steel, Style Stainless Steel Mesh, Asian, Color: Silver 4 Pieces Strainer, Small, Fine, Material: Stainless Steel Diameter: Approx. 8.5cm / 3.35 Inch Total Length: Approx. 22cm / 8.66 Inch Handle Length: Approx. 11.2cm / 4.41 Inch Color: Silver/golden/copper Plating (optional) Package Includes: 1 Piece Fine Mesh Stainless Steel Cocktail Strainer 4 Pieces Colander Strainer Type: Colanders & Strainers Item Type: Pearl Milk Tea Colander Material: 100% Food Grade Stainless Steel Temperature: -40f To +446f (-40c To +230c) Multiple Use Kitchen Gadgets: Kitchen Helper Feature: Made Of Premium Stainless Steel, No Toxic Chemicals, Lead Free, Pvc Free. The Versatile Design Will Fit Nearly All-round Pots, Pans And Bowls. Uses: For Hot Pot Eating, Soup Draining And Pearl Food Holding. 4 Pieces Siever,small, Stainless Steel Fine Mesh Strainer Material: Stainless Steel; Diameter: 12 Inches; Depth: 2 Inches To 2.5 Inches; Fine Mesh:0.025mm To 0.5mm; 4 Pieces Strainer,medium Fine, Strainer Type: Easy-grip Colander Medium:stainless Steel:item Dimensions:lxwxh: 8x4x0.2 Inches 8 Pieces Turner, 3” X 6”, Item Dimension: L40.1 Cm X W9.6 Cm X H13.4 Cm Item Weight: 0.3 Kg Material: 18/10 Stainless Steel Tool Head & High Impact Nsf Approved Polypropylene Textured Handles (pro-gourmet) Lightweight & Easy To Hold Accommodates Right- And Left-handed Users Use & Care Easy To Clean And Dishwasher Safe. 8 Pieces Spatula, Stainless Steel Teppanyaki Spatula L 14.8cmxw11.8cmxh 2cm 8 Pieces Wooden Spoon, Material: Beech Wood Color: Wood Color Size: 26.3cm X 6.3cm 8 Pieces Parisienne Scoop, Stainless Steel Baller Heads - 22mm Diameter And 25mm Diameter. Head Include Small Air Hole For Easy Release. Non-slip Handle Made From Fibrox - Tpe Plastic Able To Withstand Temperatures Of Up To 80°c - 110°c. Dishwasher Safe. 8 Pieces Zester, Durable And Rust Resistant Stainless Steel Material Five Sharp Zester Holes That Quickly And Easily Zest Lemons, Oranges, And Other Citrus Fruits Built-in Channel Knife That Peels Citrus Fruits To Make Beautiful Garnishing Easy To Grip Stainless Steel Handle For Steady Control When Testing With A Built-in Hole For Easy And Proper Storage Easy To Clean And Dishwasher Safe Dimensions: L16.3 X W2.4 X H16.3 Cm 8 Pieces Piping, Bag Size: Small: About 26cm Long, About 15cm Wide At The Opening, Medium: About 30cm Long, About 17cm Wide At The Opening, Large: About 34cm Long, About 21cm Wide At The Opening. Material: Silica Gel Package: 6 * Small Connectors 2 * 12-inch Bags 2 * 14-inch Bags 2 * 16-inch Bags 8 Sets Pastry Tubes, 8pcs/set Stainless Steel Pastry Piping Nozzles Size: Approx. 30cmx17.5cm; Material: Eva And 430 Stainless Steel 8 Pcs. Strainer Chinois,small, Commercial Grade Quality China Cap Strainer With Pot Ring Hang Hook Coarse Mesh - 10" Handle, 8" Diameter, 8" Deep", 18" Total Length Material:18/8 Stainless Steel Color:silver Item Dimensions: Lxwxh 17.13 X 8 X 7.75 Inches Item Weight:0.71 Lbs 3 Pieces Filling Funnel, Material:304 Stainless Steel Size Dimension:14x11cm 4 Pieces Measuring Spoon, Material: Stainless Steel , Weight:110g Size:1/8 Tsp-length: 4.25″,diameter: 0.59″ 1/4 Tsp-length: 4.33″,diameter: 0.71″ 1/2 Tsp-length: 4.45″,diameter: 0.91″ 1 Tsp-length: 4.60″,diameter: 1.10″ 1/2 Tbsp-length: 4.72″,diameter: 1.26″ 1 Tbsp-length: 4.92″,diameter: 1.57 6 Pieces Tongs, 9 Inches, Material: 304 Stainless Steel With Silicone Handle; Size:9 Inches; Feature: Ring Pull Locking System, Scalloped Heads 10 Pieces Tongs, 12 Inches, Material: 304 Stainless Steel With Silicone Handle; Size:12 Inches; Feature: Ring Pull Locking System, Scalloped Heads 8 Pieces Measuring Cup, Material: 304 Stainless Steel; Feature: 4cups/set. 100ml, 50ml, 15ml And 5ml Cup Sizes On A Storage Ring; 1 Set Measuring Urn, Specification: 500ml Colour: Silver Material: 304 Stainless Steel 1 Pc Ice Cream Scoop, Size: 18*4.2cm/18*4.8cm Color: Black/silver Material: Aluminum Alloy; Feature: Anti-freeze Ice Cream Scooper With Comfortable Handle 4 Pieces Cheese Cloth, *made Of Natural Cotton, Never Been Dyed Or Bleached. It's Safe And Healthy To Use And There Is No Color Will Dye Over The Cheese, Yogurt, Turkey Or Any Other Foods. *due To Tight-weave Mesh, It Can Filter More Impurities And Work Efficiently. *it Could Be Used For Making And Wrapping Homemade Cheese. It Is Used As Greek Yogurt Or Butter, Almond Milk Or Nut Milk, Fruit Juice. Furthermore, More Impurities Will Be Filtered Out When You Filter Cold Brew Coffee Or Homemade Beer Wort, Honey And Etc. Specification: *material:cotton *color:as Show *size:100 X 120 Cm/39.3 X 49.2 In 10 Pieces Serving Spoon, Material: 304 Stainless Steel Color: Silver Size: 24cm 24 Pieces Pepper And Salt Grinder, Size: 5.3cm/2.09"x 19cm/7.48"; Material: Stainless Steel Case Grinder With High Quality Glass Container 4 Set Weighing Scale, 5 Kgs, Type:hanging Scale Origin:cn(origin) Size:18.5*14*1.9cm Rated Load:other Display Type:lcd Digital Screen Power Supply:3*aaa Battery(not Included) Certification:ce Model Number:electric Scale Capacity:10kg/1g,3kg/5kg/0.1g Is Smart Device:no Color:black Unit:g, Lb, Oz Measuring Range:10kg/10g, 3kg/5kg/1g Material:new Abs Engineering Plastic + Stainless Steel Backlight:yes Ftion 1:kitchen Scales Ftion 2:jewelry Scales Ftion 3:electronic Scales Ftion 4:electronic Balance 2 Unit Core Seed Remover, Effortlessly Remove Cores From Fruit Simply Push The Stem Into The Core Of The Apple And Twist To Remove Ultra Stainless Steel Coring Blade Twist And Slide Body For Easy Core Removal Length: Approx. 180mm / 7inch Diameter Of The Core: Approx. 2cm / 0.8 Inch Material: 304 Stainless Steel 8 Pieces Wire Whisk,small, Material: Stainless Steel; Size: H01-8 Inch:21*5cm; 8 Pieces Wire Whisk, Medium, Material: Stainless Steel; Size: H02-10 Inch:26*6cm; 8 Pieces Wire Whisk, Heavy Duty, Material: Stainless Steel; Size: H03-12 Inch:29*6cm 2 Pieces Can Opener, Material: Stainless Steel + Pp Plastic Size: 19.5cm X 7.5cm Color: Silver + Black Features: 1. 100%brand New And High Quality 2. Ergonomic, Non-slip Grip, Comfortable And Safe In Operation. 3. High-quality Stainless Steel Material, Won't Break Or Bend, Corrosion Resistant, Smooth Felling And High Durability. 4. Rotating Handle And Precision Gears, Efficient And Labor Saving, Children, Adults And The Elderly Can Easily Work With. 5. It Combines 3 Functions In One Unit. This Versatile Can Opener Is Designed For Opening A Can Lid, Opening A Bottle Cap, Levering Or Loosening A Can Lid. 6. Easily Pierce And Open Various Types Of Cans, Like Tin Can, Oil Can, Milk Can, Cat Dog Food Can, Metal Can, Beer Can, Small Can, Large Can, Water Bottle, Jar Etc 7. High Quality Food-grade Material - The Sharp Cutting Disc Is Made Of Food-grade Material Especially The Metal Tooth Is Made Of Stainless Steel, Please Rest Assured Use. 8. No Dangerous Sharp Edges - Protect Yourself And Your Family With This Tin Opener That Leaves Edges Completely Smooth. Safely And Easily Opens Big And Small Cans In All Shapes And Sizes In Seconds. 9. Comfortable And Convenient For Storage - The Opener's Soft, Anti-slip Handles Are Easy To Grip - Which Is Especially Handy For Senior Citizens. You Can Store It In A Drawer Or Simply Hang It On A Hook In Your Kitchen. 1 Piece Multi-purpose Kitchen Scissors/shears, Material: Stainless Steel Size: 21 X 9 Cm; Features: Extra Sharp For Cutting Meat, Poultry Or Fish With Cracking And Bottle Opening Function 8 Pieces Soup Ladle, 4 Oz, Material: 18/10 Stainless Steel With Hole On Handle Serving. Size: Length 34cm*diameter 7.5cm 8 Pieces Soup Ladle, 6 Oz, Material: 18/10 Stainless Steel With Hole On Handle Capacity: 6 0z; Handle Length:3 Inches; Size: Length 34cm*diameter 9.5cm 8 Pieces Soup Ladle, 8 Oz, Color: Stainless Steel Material: Stainless Steel Style: 8 Oz Ladle Item Dimension Lxwxh: 14.6 X 2.5 X 3.9 3 Pieces Soup Ladle, 12 Oz, Soup Ladle Food Grade Rust-proof Stainless Steel Dishwasher Safe Hot Pot Soup Ladle Length: 18 Width: 4.6 Height: 2 Freezer Safe: Yes Type: Gravy / Sauce Ladles Dishwasher Safe: Yes Microwave Safe: No Capacity: 10.0-14.9oz Feature: Heavy Duty 2 Pieces Kitchen Spoon, Mirror Finished Durable Stainless Steel Material Dishwasher Safe Ss Dinner Spoon 4.0mm Thickness Length: 21cm Weight: 73gm 8 Pieces Kitchen Spoon, Slotted, Stainless Steel Slotted Spoon Is Ideal For Stirring And Straining Pasta Or Vegetables. The Soft, Non-slip Handle Cushions Your Hand During Use, And The Polished Stainless Steel Is Both Sleek And Durable. Dimensions: 2 X 2.75 X 12.4 Weight: 0.29 8 Pieces Kitchen Fork, Color: Silver Substance: 18/10 Stainless Steel Surface Finishing: Matt/polished Net Weight: 0.11 Kg Length: 33.40 Cm Width: 2.50 Cm Height: 1.90 Cm Handle Length: 12.50 Cm 4 Pieces Carving Fork, Package Dimensions: 13.07 X 1.42 X 0.87 Inches (33.2 X 3.6 X 2.2 Cm) Item Weight: 5.6 Ounces (158.76 Grams) Handle Material: Stainless, Stainless Steel, Abs, Plastic, Steel 3 Pieces Digital Kitchen Thermometer, Digital Kitchen Food Thermometer For Meat Cooking Water Milk Food Probe Temperature Temperature Range: -50°c To 300°c Or -58°f To 572°f Resolution: 0.1°c Or 0.1°f Accuracy: ± 1°c Or ± 1 °f Optional Temperature Unit: °c / °f Material: 304 Stainless Steel & Abs Plastic Buttons: On/off, °c/°f, Hold Power Supply: 1 X 1.5v Lr44/ag13 Battery (not Included) Power Saving: Auto Power Off After 10 Minutes Total Length: 24.6cm Probe Length: 14.5cm 3 Pieces Multi-function Vegetable Fruit Peeler Slicer Cutter Chopper, Stainless Steel Multifunction Fruit And Vegetable Peeler Slicer Shedder Peeler 5 Different Inserts With 11 Different Ways To Cut Cut Into Cubes Or Sticks In 3 Different Sizes Slices In 2 Different Thicknesses Cut In To Quarters, Eighths And Wedges Long- Lasting Super- Sharp Stainless Steel Blades Extra Sharp Grater Mandolin Slicer With Safety Food Holder 1 X Cutting Top With Integrated Stylus 1 X Cutting Base 1 X Transparent Collecting Container (capacity 1,500 Ml) 1 X Fresh Cover For Collecting Container 1 X Knife Insert (6 Mm X 6 Mm Or 12 Mm X 12 Mm) 1 X Knife Insert For Quarter Or Eighth 1 X Planer Insert With Blade Protection 1 X Food Holder With Guide 1 X Detachable Cutting Punch For Eighth 1 X Part Cover For All Knife Inserts 2 Set Stock Pot (big), Stainless Steel Large Stock Pots Casserole Stew Pan Type: Soup & Stock Pots Material: Metal Type: Stainless Steel Feature: Eco-friendly Applicable Stove: General Use For Gas And Induction Cooker Product Name: Soup Pot Usage: Soup, Milk, Noodle Pot, Cooking Pots Shape: Straight Material Type: Stainless Steel Diameter: 25 / 30 / 35/ 40 /45/ 50 Cm 2 Pieces Frying Pan, Small, Frying A Single Egg, Sausages, Seafood, Poultry, Burgers Or Vegetables, Toasting Pine Nuts Or Even Toasting Off Some Spices. Specification: Pot Diameter: 13cm Pot Height: 2.8cm Full Length Of Pot Body: 25cm Pot Bottom Diameter: 11.5cm Included: 1 X Mini Saucepan 12cm Small Nonstick Frying Pan For Household Fried Egg Pancakes Round Mini Saucepan 4 Pieces Frying Pan, Medium, Material: 304 Stainless Steel Size Diameter: 32cm Feature: New Technology Experience, New Design Suitable For: General Use For Gas And Induction Cooker Product Features: 1.13.4 Inch Stir Fry Pan Made Of Stainless Steel, Nonstick Cookware Interior Is Honeycomb Texture, Achieve Separation State Nonstick. 4 Pieces Frying Pan, Large, Material: Carbon Steel Wok Handle: 12cm Wood (beechwood) Diameter: 36cm Depth: 10.5cm Handle Socket: Welded Non-stick Pan, Perfect For Your Daily Home Cooking 2 Pieces Colander, Small, Ergonomic Design, Smooth Handle Grip. Top Hanging Ring Design, Free To Hang Up. Specification: Material: Stainless Steel Size: 32 * 10cm / 12.60 * 3.94" Color: As Shown Package Included: 1pc * Colander 3 Pieces Colander, Medium, Features And Usage: Good Quality Stainless Steel Material With Competitive Price Can Be Used For Strain Soup, Juice, Milk, Tea, And Other Liquids. Strong, Sturdy, And Durable. Made For Heavy Work. Rust, Crack, And Stain Resistant Easy To Clean And Carry High, The Goods Quality Support With Your Demand. The Long Handles Protect Your Hands From Hot Grease And Oils While Letting You Cook Your Favorite Foods Product Name: Stainless Kitchen Wire Skimmer/strainer/colander Material: Stainless Steel Size / Capacity: 22cm Color: Silver Shape, Round Type: Strainer Item Number: 22cm F/h Skimmer 2 Pieces Cutting Board, Packing: 1 X 1pcs Chopping Board Material: Bamboo Wood + Stainless Steel Color: Brown, Light Brown (random) Size: 34cmx 1.7cm X 24cm Design: Arc Corners Features: Made Of High-quality Bamboo Anti-mildew And Germ Proofing 100% Brand New And High Quality Easy To Clean And Very Affordable The Whole Bamboo Panel Has A Clear Bamboo Pattern. The Curved Design Of The Handle Makes It Easy To Hang. Thick, Extremely Durable, The Smooth Surface Also Prevents Your Knives From Dulling Too Quickly. 4 Pieces Fish Poacher, Medium, Stainless Steel Fish Streamer For Big Fish, Big Cooking Pot With Complete Accessories Pan Material: Stainless Steel Thickness: 0.7mm (+0.3mm) Dimensions (l X W X D): 18" X 5" X 6" (±0.5") Handle Material: Stainless Steel; With Two Side Handles Includes A Lid With Handle And A Perforated Rack Insert Dishwasher Safe 1 Piece Casserole, Small, Aluminum Casserole High Quality Aluminum Durable Handles & Knobs Size #14 (25cm Diameter, 15cm Height) Color: Aluminum Size: 35cm*28cm*20cm Weight: 0.7kg 6 Pieces Casserole, Medium, Heavy Gauge Aluminum Forged Base For Extreme Strength And Wrap Prevention Durable 3 Layer Blue Diamond Non-stick Coating Coating Lasts Longer Than Any Other Pan Works On All Stovetops: Induction, Gas, Electric, Ceramic, Etc. Heat Resistant Riveted Bakelite Handle And Knob Tempered Glass Lid Heats Up Quickly And Evenly Ideal For Healthy Cooking Easy-to-clean And Dishwasher Safe 4 Pieces Wok, Small, Material: Wok Is Made With Carbon Steel With Wooden Handle Available Size: 34cm Diameter Double Handle Suitable For Gas Stove And Induction Cooker Good Thermal Conductance For Even Cooking Of Vegetables And Meat 4 Pieces Wok, Medium, Features And Usage: Whether Stir-frying Veggies Eggs Meats Or More This Wok Distributes Heat Evenly And Wipes Clean When You’re Finished Riveted Acacia Wood Handles Make Flipping And Releasing Food Easy And Will Add A Touch Of Elegance To Your Kitchen Perfect For Veteran Chefs Or Others Simply Looking To Expand Their Culinary Palette This Wok Serves Up Delicious Results With Effortless Performance Color: Black Size: 14” Material: Carbon Steel Wok Non-stick Surface Healthier Cooking 1 Piece Double Boiler, Medium Specialty Pan Type: Egg Poacher/boiler Cookware Material: Stainless Steel Cookware Capacity: 1.1l - 2l Cookware Diameter (cm): 22 Model: Db22. Cookware Features: Includes Lid, Dishwasher Safe, Induction Safe, Helper Handle, Pfoa Free, Eco Friendly, Cover Included What’s In The Box: 1 X Double Boiler 22cm 1 Piece Paellera, Product Details: Made With Top Grade Carbon Steel, These Pans Conduct Heat Quickly And Evenly Throughout To Create The Perfect Paella. It’s Thin And Lightweight Material Makes This Pan Durable And Trustworthy. It’s Innovative Hammered Dimple Technology Makes The Bottoms Of The Pans Rigid And Perfect For Cooking Paellas Package Dimensions: 15.24 X 13.62 X 2.05 Inches (38.7 X 34.6 X 5.2 Cm) Item Weight: 2 Pounds (0.9 Kg) Material: Carbon Steel Item Diameter: 13 Inches (33 Cm) Color: Silver Capacity: 468 Cubic Inches (1188.7 Cm) 8 Pieces Glass Rack, Description: Product Category: Wine Glass Rack Color: Black Height: 5.5 Cm Width: 22.5 Cm3 5 Rows: 50cm In Length, Can Hold 10-15 Weight: 0.55kg For 5 Rows Application: 4cm- 9cm In Base Diameter, Less Than 3cm In Column Diameter, 10cm In Belly Diameter Of Glass. Material: Iron Product List:1* Wine Glass 2 Pieces Soup Cup Rack, Material: Plastic Color: Grey Shape: Square Length: 19.75" In Width: 19.75" In Height: 4" In Size: Compartment 4.375"l X 4.375"w X 4.25" Temperature Range: Up To 200°f Features: Dishwasher Safe 6 Pieces Plate Rack, Specification: Color: White, Green Material: Stainless Steel Dimension: W X L X H (25cm X 50cm X 43.5cm) Features: Stainless Steel Material, No Rusting, Long Lasting Durability. Saves Tons Of Space And Time By Making It Easier To Access Utensils And Supplies, Making Your Kitchen More Clean And Tidy. Dish Placement Area (16 Dishes) Cutting Board Placement Area (5cm/1.97in) Tool Placement Area: 3 Spaced Grids Hanging Spoon Placement Area: 4 Storage Hooks Bowl Placement Area: More Than 12 Bowls Removable Drain Board 2 Pieces Baking Tray, Small, 1pc Small Rectangular Baking Tray Measurement: 8x12 8x 12 Outside, 6.5x10 Inside Color: Black Made Of Carbon Steel Durable And Good Quality This Can Be Fit To Small Oven 8 Pieces Utility Tray, Stainless, Stainless Steel Food Measurement: 9" Length X 6.75" Width X 1" Height. Material: Stainless Steel. 12 Pieces Roasting Pan, Material: Stainless Steel Color: Silver Size: 42*32*7cm Features: Easy To Clean Up. Big Enough For Whole Chicken Or Turkey. Very Convenient To Serve With Rack. Package Included: 1 X Pan (with A Rack) 4 Pieces Dishtowels, Material: Cotton/linen Blend With High Absorption Capacity. Color: Square Stripe/gray Beige Length: 70 Cm (28 ") Width: 50 Cm (20 ") Package Quantity: 2 Pieces 8 Pack Plastic “silverware” Or Real Silverware, Package Dimensions: 9.92 X 6.57 X 3.23 Inches (25.2 X 16.7 X 8.2 Cm) Item Weight: 7 Pounds (3.15 Kg) Material: Stainless Steel Finish Type: Polished Color: Silver Is Stain Resistant: Yes Is Dishwasher Safe: Yes Number Of Pieces: 60 2 Set Glasses, Capacity: 11.8 Ounces Color: Clear Item Weight: 14.4 Ounces Size: 2.91x5.83 In Product Detail: 11.8-ounce Highball Drinking Glass (set Of 6) With A Sleek Design And A Thick, Sturdy Base; Ideal For Serving Mixed Drinks, Beer, Soda, And Other Ice-cold Beverages Made Of All-purpose 100% Soda-lime Glass (not Tempered Glass); Odor-resistant, Stain-resistant, Shatter-resistant, And Cadmium- And Lead-free; Suitable For Residential And Restaurant Use Crystal-clear Glass Provides Exceptional Clarity For Nicely Highlighting Colorful Concoctions And Bubbly Beverages Residential And Commercial Dishwasher- And Microwave-safe Up To 95°f; Not Oven Safe; Accommodates Temperatures Ranging From 50°f To 212°f When Heated And Cooled Slowly; Do Not Put Hot Water In Freezing-cold Glass 6 Set Tea Cups, Bc Coffee Cup And Saucer- Black Piggy Pink, Bone Tea Cream, Candy Green 2 Pieces Small Plate/saucers, Material: Ceramic High Quality Can Be Use In Coffee Or Tea Cup Size H: 9.5cm W: 14.5cm Saucer Size H: 2cm W: 15.5cm 6 Pieces Per Set 6 Set Cabinet Dish Organizer Material: Plastic Dimension: L39cmxw35cmx122cm Colors Available: Green & Blue 1 Piece Sink, Surface Treatment: Brushed, Brushed Installation Type: Undermount Bowl Shape: Rectangular Number Of Holes: One Sink Style: Single Bowl Material: Stainless Steel 304-18/8 Dim (inch): 32"x19" Bowl Size (inch): 30"x17" Depth (inch): 10" Thickness (guage): 18 Usage: Kitchen Packing: Carton Box 1 Piece Sponge And Soap Holder For Kitchen Sink, Material: Stainless Steel Size: L X W X H (18.3cm X 10cm X 9cm) Color: Silver 3 Pieces Pots/pans, Product Description: Non-stick With Thermo-spot 9 Pieces Cooking Set Features & Details: Set Contains: ▫️stewpot: 22/24cm With Lids ▫️24cm Fry Pan ▫️28cm Wok Pan ▫️spatula ▫️spoon ▫️slotted Spoon Product Information: Package Dimension: 61.8 X 41.6 X 17.6 Cm Item Diameter: 28 Cm Item Weight: 6.7 Kgs Care Instruction: Dishwasher Safe No. Of Pcs: 9 Pcs 1 Set Cooking Utensils, Stainless Steel 25-piece Set Lids And Accessories Included Comes With 1- And 2-quart Saucepans, A 5-quart Dutch Oven, A 9.5” Skillet, An 8” Frying Pan, A 10” X 15” Cookie Sheet, A Storage Tub And 5 Round Glass Bowls The Stainless-steel Heating Surface Cooks Everything Evenly Made From A Single-ply Stainless Steel That’s Designed To Handle High Heats And Is Easy To Clean Each Piece Comes With A Cover To Keep In The Heat Set Includes 9 Nylon Cooking Tools Like Spatulas, Solid And Slotted Spoons And Turners, Ladle And More 1 Set Rotary Egg Beater, Stainless Steel Whisk Set Come In 2 Sizes. This Two-piece Stainless-steel Kitchen Utensil Set Will Blend In Well When You’re Trying To Outfit Your Kitchen With Everything You Need To Keep Your Chef At Home Happy As Can Be. High Quality Material Wear-resistant And Durable, Not Easy To Rust Size:16cm,21cm Material: Stainless Steel Package Includes: 2x Whisk Beater 2 Set Scraper, Made Of Silicone And Bpa Free, Flexible, Non-stick Nontoxic, Heat Resistance: -40 To + 230 Ergonomically Designed Long Handles And Being Perfectly Shaped With A Rounded Edge For Bowls And A Pointed Edge For Corners. Great Design, Easy To Clean Specification: Type: Cake Tools Material: Silicone Color: Orange, Purple, Green, Red, Yellow, Blue, Black Size: About 21x4.1cm Uses: Stirring, Baking, Scraping Noodles, Etc. Features: Integrated Design, High And Low Temperature Resistance Quantity: 1 Package Includes: 1x Scraper 3 Piece Gas Range And Oven, 3 Gas Burners, 1 Hot Plate Stainless Drip Tray Gas Thermostat Oven Electric Grill With Rotisserie Black Enameled Body 50x50cm Weight: 39.5 Kg Dimensions: 54 × 50 × 88 Cm 1 Piece Refrigerator, Height: 111.5 Cm Width: 51. Cm Length: 53.6 Cm Gross Weight: 34 Kg Refrigerator Type: Single Door Net Weight: 31 Kg Capacity: 5.6 Cu.ft Frost System: Semi-automatic Wattage: 75 Watts Warranty: 1 Year Of Parts And Labor; 5 Years Of Compressor Led Light Safety Glass Shelves Silver Finish 2 Piece Drawers, 3 Layered Drawer ½” Thick Plywood Captured Ceiling Panel ½” Thick Plywood End Panels ¾” Thick Plywood Full Depth Adjustable Shelves ½” Thick Plywood Panel ¾” Thick Full Overlay Doors And Drawer Fronts ½” Thick Plywood Captured Floor Panel ¾” Thick Solid Hardwood Face Frames ½” Thick Plywood Captured “i-beam” Braces ½” Thick Plywood End Panels ¾” Thick Plywood Full Depth Adjustable Shelves 5/8” Thick Solid Wood Dovetail Drawer Box With ¼” Thick Plywood Captured Floor ½” Thick Plywood Captured Floor Panel ¾” Thick Solid Hardwood Face Frames ½” Thick Plywood Captured Toe Kick 1 Piece Cupboards, Completely Made Of High-grade Stainless Steel. Professional Furnishing Systems That Meet The Highest Quality And Functional Standards. The Stainless-steel Furniture Made Of Stainless Steel Aisi 18/10/304 Is Primarily Made According To The Special Needs, The Available Rooms, And The Functional Requirements Of The Operator. All Edges Welded And Polished. Best Solutions In Quality And For Installation Flexibility. Project Solutions And Other Dimensions May Vary. Wall Cupboard With O Bottom Storage Shelf, Intermediate Bottom, O 2 Sliding Doors. Dimensions: Ca. 1500 X 400 X 600 Mm (l X D X H) Carrying Capacity: Max. 200 Kg Net Weight: Approx. 30 Kg. 1 Piece Brush, Feature: 100% Brand New And High Quality Non-toxic And Environmentally Friendly. Multipurpose Kitchen Utensil Tool. Suitable For Baking, Cooking, Bbq Basting. For Brushing Oil On Cookers When Making Cakes, Bread, Butter Or Barbecuing. Practical And Stylish Can Be Used Repeatedly Easy-to-clean And Good Temperature Resistance Material: Silicone Color: Blue, Orange, Red And Violet Size: 21 X 3.3 X 1.1cm Package Included 1 X Silicone Basting Brush 3 Piece Blender, Cord Length: 1.2m Power: 350w Voltage: 220-240v Frequency: 50/60hz Pulp Container: 500ml Blender Jar Capacity: 1l Integrated Cord Storage: Yes Speed Settings: 2 Safety Clamps: Yes Suction Feet: Yes Accessories: Blender, Chopper, Juice Jug, Mill Colors: Bright White With Silver Accents Housing And Clamps Material: Pp Lid Material: San Pusher Material: Pp Product Weight: 2.48kg Box Dimension (w X H X D): 232 X 330 X 470 Mm 1 Year Warranty 1 Piece Microwave Oven, 3-layer Porcelain Coated Metal Body Manual Rotary Control Defrost Function 20l Capacity Measurements: L45 X W34 X H26cm Output Power: 700w Input Power: 1200w 1 Year Warranty 100% Authentic Microwave Features: Stainless Steel Microwave Type: Countertop Inverter: Non-inverter 1 Piece Kitchen Scale, Features: Square And Round Plate Available Mechanical Dial With Zero Adjustment Knob It Includes Removable Pan Colors: Random Spring Kitchen Scale, Mechanical Kitchen Scale, Food Scale Suitable For Shopping E-commerce Sales, Kitchen Activities Dial Display With Clear Mark, Easy To Read And Comfortable. Square Shape, Drip-proof, Durable And Can Hold Things Weighed. Plastic Shell, Lightweight, Durable And Environment Friendly. No Need Electricity, Easy To Operate And Portable To Take And Store Quality Product With Precise Portion Easy To Use, Multi-function Home Scale Compact Scale 5 Kilos Capacity Size: Removable Pan: 15.5cm X 15 Cm X 5cm Kitchen Scale: 12 Cm X 12.5 Cm X 20 Cm Material: Plastic 2 Piece Measuring Spoons, Stainless Steel Measuring Spoons Set Of 7 Stackable Measure Spoon For Dry And Liquid Ingredients Etched Marked Baking Cooking Spoon With Detachable Ring Holder Convenient For Your Life. Stainless Steel Without Bpa And Could Be Used For Any Food, Rust Resistant, Will Not Be Polluted Or Eroded, Make Your Cooking Always Safe And Health. Conveniently Nests Inside One Another Design And One Steel D-ring Allowing You To Store Them In Any Drawer, Cabinet Or Cupboard. Easy To Clean, Simply Wash With Soap And Warm Water Or Load Them Into The Dishwasher For Fast Cleaning. Color: Silver Material: Stainless Steel Size: Length 12.6* Width 4* Height 2.2cm Package Contents: 7 * Measuring Spoons 1 * D-ring 3 Set Measuring Cups, Product Description: 3-piece Measuring Cup Set Includes One Each: 1-cup, 2-cup And 4-cup Measuring Cups Easy To Read Measurements In Cups, Ounces, And Milliliters. Features A Curved Spout For Precise Pouring And Easy-grip Handles For Comfort Durable High-quality Tempered Glass Is Dishwasher, Freezer, Microwave, And Preheated Oven Safe Nonporous Glass Won’t Absorb Food Odors, Flavors, Or Stains Bpa Free Secure-fit Plastic Lids Are Freezer, Microwave, And Top-rack Dishwasher Safe 1 Pcs. Kitchen Shears, Multifunction Comfortable Handle Kitchen Scissors Heavy Duty Food Shears For Chicken Meat, Vegetable Fish Heb, Poultry Stainless Steel Cooking Scissors Material:30cr13 Stainless Steel Highly Antagonistic And Very Sharp- Soft And Hard Double Plastic Handle Double-edged Blade Non-slip, Stable Removable Rivet Design Flexible Application, Easy To Clean Package Included:1 X Stainless Steel Kitchen Shears Color: Black + Silver Weight: 145g Size: 227 X 78 Mm 2 Pieces Potato Masher, Multifunctional Stainless Steel Potato Masher For Fruit, Vegetable Baby Food Supplement Mashed Potato Tool Selected Materials, Safe And Durable. Strong And Not Easy To Rust. Ergonomic Design, Easy To Use And Save Effort. Suitable For A Variety Of Foods. Material: 304 Stainless Steel 4mm Thickness One-piece Molding Size: 7 Cm X 7 Cm X 13.6 Cm Color: Silver 5 Piece Graters, Product Name: Tabletop Drum Grater High Quality: The 3 Different Rotary Ultra-sharp Cylinders Slicer Made Of Food Grade Stainless Steel. All Pieces Are Detachable For Easy To Clean, Dishwasher Safe Universal Fit: Rotary Drum Grater Is Great For Cheese, Vegetables, Potatoes, Coleslaw, Nuts, Hash Browns, Onions And More With This Hand-powered Rotary Grater Cooking Choice: Rotary Cheese Grater Package Includes 3 Different Interchangeable Rotary Ultra-sharp Cylinders Drums For Different Cooking Choice Features: The Drum Shredder With Suction Base Ensures Solid Grip And Stability On Flat Surface; Simple Hand Crank Turns Drum Creates Perfectly Grated Ingredients Type: Graters Use: Home Kitchen Material: Metal, Stainless Steel & Abs Plastic Blades: 3 Stainless Steel Feature: Kitchen Creative Tools Function: Shred A Wide Variety Of Fruit And Vegetables, As Well As Cheeses Accessories: Chopping / Mixing Blade, Shredding Disc, Slicing Disc Color: Green Size: 26 X 11.5 X 24 Cm Weight: 674g 5 Piece Funnels, Stainless Steel Piston Funnel With Holder For Cream Sauce Dosing Funnel For Sauce Style: Silver Material: Stainless Steel Size: Shelf Height Is About 17cm, Handheld Funnel Height Is 20cm 2 Piece Can Opener, Chef’s Classic Multi Can Opener Features: Durable And Easy To Clean. Material: Designed With High-grade Stainless Steel Size: 18/8 Stainless Steel Ergonomic Stainless-steel Handles Hygienic Design Ensures Easy Cleaning Of All Surfaces 5 Piece Cast Iron Pots And Pans, Pots And Pans Set Cast Iron Cookware Non-stick Wok Pan 316 Stainless Steel Household Frying Pan With Gas-fired Induction Cooker Diameter: 28cm Metal Type: Stainless Steel Wok Type: Non-coating Pans Type: Chef’s Pans Material: Stainless Steel Type: Pans Pot Cover Type: Glass Cover Capacity: 4-5l Applicable Stove: General Use For Gas And Induction Cooker Feature: Eco-friendly Pot Cover: Glass Cover Pot Cover: Glass Cover Product Categories: Wok Application Of The Stove: General-purpose Material:316 Stainless Steel Characteristics: Non-stick Pan Item:316 Xue Ping Guo The Bottom Of A Pan Material: Composite Multi-layer Base Packaging: Carton The Lid Type: The Glass Cover Product Quality Grade: Accepts Style: European 1 Piece Gas Burner, Double Top Gas Stove Automatic Ignition Removable Trivet With Drip Pan Stainless Top And Front Double Detachable Top Burner High Quality And Durable The Powder Coated Pan Support Provide Ample Support At The Base Of The Pan Such That They Maintain Their Balance On The Stove And The Utensils Do Not Fall Or Rattle While Stirring Your Food. Stainless Steel Body Facilitates Anti-rust Property Which Give Our Gas Stove Longevity And Durability. This Range Of Cooktop Comes With A Stainless-steel Body 650mm X390mm X 135mm 1 Piece Double Broiler Steamer, 2 Layer Stainless Steel Steamer Pot Large Capacity Soup Pot With Double Boilers Stockpot Cookware Cooking Tools Feature: Eco-friendly Model Number: Stainless Steel Thicken 2 Layer Steamer Pot Layers: Double Type: Double Boilers Sheet Size: 28cm Material: Stainless Steel Specification: Name: Steamer Pot Material: Stainless Steel Size: Thickened Double Steamer Pot-28cm/11.02inch Packing List: Steamer Pot*1 2 Piece Food Thermometer Weight: 80 G Dimensions: 218 X 34 X 20 Mm Operating Temperature: -20 To +50 °c Product-/housing Material: Abs Protection Class: Ip67 With Topsafe Product Colour: White Length Probe Shaft: 55 Mm Length Probe Shaft Tip: 17 Mm Diameter Probe Shaft: 3 Mm Diameter Probe Shaft Tip: 2.3 Mm Standards: En 13485 Battery Type: 3v Button Cell (cr 2032) Battery Life: 350 H Display Type: Lcd (liquid Crystal Display) Display Size: One-line Display Lighting: No Storage Temperature: -40 To +70 °c Temperature – Ntc Measuring Range: -50 To +275 °c Accuracy: ±1 % Of Mv (+100 To +275 °c) ±0.5 °c (-30 To +99.9 °c) ±1.0 °c (-50 To -30.1 °c) Resolution: 0.1 °c Reaction Time: T₉₉ = 10 S (measured In Moving Liquid) Measuring Rate: 0.5 S 1 Piece Kitchen Knife Set, 8 Pieces Kitchen Knife Set Chef Knives Fruit Stainless Steel Knife Sharpener Rod Peller Scissors Pairing Tools Specifications: Item Name: Kitchen Knife Set Main Material: 3cr13 Stainless Steel Quantity: 8pcs Note: Please Kindly Note That There Could Be A Few Deviations As The Result Of Manual Measurement. Thank You Package Information: Package Size: 31 * 28 * 2.5cm / 12.3 * 11.2 * 0.98in Package Weight: 700g Package List: 2 * Chef Knife 1 * Chopping Knife 1 * Knife Sharpener 2 * Fruit Knife 1 * Scissors 1 * Peeler 5 Piece Meat Slicer, Description: Meat Slicer Material: The Frozen Meat Slicer Is Made Of High-quality Stainless Steel, Which Is Easy To Clean And Has A Long Service Life. It Helps To Cut Frozen Meat Into Various Uses, Including Making Hot Pot, Sukiyaki, Pizza Toppings, Sandwiches Or Ginger. It Can Effectively Avoid The Vibration And Noise Of The Electric Tool During The Working Process, It Is Simple To Operate And Easy To Clean. The Thickness Of The Meat Can Be Adjusted From 0.3mm To 8mm, Just Turn The Knob Slightly. Handle And Suction Cup: Even If There Is Oil On The Hand, It Will Not Slide. The Rubber Suction Cup At The Bottom Is More Suitable For Flat Desktops, And Ceramic Tiles, Glass And Metal Desktops Are Easier To Hold. Specification: Handle Length: 43.5/17.10inch Size (l X W): About 33x17cm / 12.96x6.69inch Blade Length: About 20cm Material: Stainless Steel Package Includes: 1x Vegetable Cutting Machine 2 Piece Bread Toaster, 2 Bread Toaster Includes Removable Crumb Tray For Cleaning Cancel, Reheat, Defrost Button Includes Bun Burner Variable Heating Control 2 Piece Cookie Press, Decorative Tool Use, Press The Front End Of The Handle Button, Use The Above Operating Rod, The Extrusion Is Under Your Control. Features: 100% High Quality Type: Cookie Machine Material: Aluminum Alloy, Abs Plastic Size: Diameter:5.5cm,height:21cm Included: 1 X Cookie Machine 20 X Design Discs 4 X Icing Tips 10 Piece Cake Decorating, "26 Pcs "specifications: Color: Pink / Blue / White / Green Material: Silicone & Stainless Steel Cake Nozzle Size: Approx.1.8cm X 3.3cm Pastry Bag Size (length):approx.32cm X 17.5cm Material: Lfgb Food Grade Eva Material Purpose: Diy Necessary Utensils For Cake Cream Package Included: 24 X Cake Nozzles 1 X Pastry Bag 1 X Plastic Piping Converter 5 Set Serving Tray, Rectangular Brown Serving Tray/ Multi-purpose Utility Tray Non-skid Feature: Non-slip Material Heat Resistance Space Saving Wide Application Fine Workmanship Specification: Item Type: Round Serving Tray Material: Nonslip Rubber, Tempered Glass Fiber Color: Brown Package List: 1 X Round Serving Tray 6 Pieces Electric Oven, 30 Liter Capacity -mechanical Control -30 Minute Timer With Bell Ring -grill/broil Function -convection Function -upper Heating,lower Heating And Upper & Lower Heating Options -90-230 Degrees Centrigrate Tempreture Control -metal Body -keep Warm Function -stainless Steel Finish -timer Settings With Alarm -includes: 1 Food Tray 1 Grill Rack 1 Crumb Tray 1 Tray Handle 230v-60hz,1500 W -20.79 X 16.38 X 12.13 Inches 9 Piece Weighing Scale, Manual Weighing Scale; 10kg.,stainless Small Bowl, Heavy Duty 6 Piece Measuring Cup, 7 Pieces With A Convenient 1/8 Coffee Scoop; Complete Set Of 7with Pouring Lip, Sizes Include 1/8, 1/4, 1/3, 1/2, 2/3, 3/4 And 1 Cup, Food Grade Material Of Stainless Steel, Dishwasher Safe, 12 Set Measuring Spoon, Sizes: 1/8tsp (0.63ml),1/4tsp (1.25ml),1/2tsp (2.5ml), 1 Tsp(5ml), 1/2tbsp (7.5ml),1 Tbsp (15ml), High Quality Stainless Steel, Dishwasher Safe 14 Set Measuring Urn, Glass,capacity: 100 Ml. (with 10 Ml Increments),metric And English System Of Measurement; With Handle And Spout, Clear, Non-porous, Tempered Glass 6 Piece Mixing Bowl, Capacity:2.5l,high Quality,durable, Stain And Rust Resistant, Stainless Steel,diameter 22cm 15 Piece Baking Sheet, 13'x18', Tray Size 46x34cm, Aluminum 30 Piece Wire Whisk, 12inch, Heavy Duty, Stainless Steel, French Wire 9 Piece Muffin Pan, 12 Cups Muffin Bun Cupcake Bakewear Mold Material:carbon Steel With Non-stick Coating, Size:l:35cm X W:26cm X H:3.0cm Large Inner 7.0cm 42 Piece Rubber Scraper, Big Size Silicone Rubber Spatula/scraper, Material:plastic+silicone Rubber, Size 24cm X 5cm 5 Piece Hand Mixer, 5-speed Selection,175w Power Consumption, 1.7m Power Cord, Weight: 1.08g., Dimensions:9.3cm X 19.5cm X 15.1cm, 220-240v 3 Piece Supply And Delivery To Oras East District Sped Center, Oras, Eastern Samar Abc = 442,032.83

Details: Notice Of Sources Sought The Purpose Of This Sources Sought Announcement Is For Market Research To Make Appropriate Acquisition Decisions And To Gain Knowledge Of Potential Qualified Service-disabled Veteran Owned Small Businesses (sdvosb), Veteran Owned Small Businesses (vosb), And Small Businesses Interested And Capable Of Providing The Services Requested, As Well As Any Large Businesses. The Results From This Source Sought Notice Will Be Used To Determine The Appropriate Set-aside. The Intended Contract Is A Firm-fixed Price Service Contract. The Department Of Veterans Affairs, Nco20 Is Looking For Vendor Sources For The Following Requirement: A Blanket Purchase Order (base + 4 Option Years) For Urinalysis Testing See Attachments For More Information: Attachment A: V20 Estimated Urinalysis Test List Volume Attachment B: V20 Participating Medical Centers And Pocs Attachment C: V20 Bpa Price List (must Be Filled Out) Required Information In Your Response To Sources Sought: In Order To Be Considered A Valid Source That Can Impact The Set-aside Determination Of A Possible Future Solicitation, Potential Contractors Shall Provide, At A Minimum, The Following Information To Peter.park2@va.gov By Below Response Deadline: 1) Company Name, Address, And Point Of Contact, Phone Number, E-mail Address, And Uei. Provide Any Existing Gsa/fss Contract Number This Requirement Can Be Fulfilled Under. 2) Please Identify Your Company S Size In Comparison To The Anticipated North American Industry Classification System (naics) Code 334516 Analytical Laboratory Instrument Manufacturing. To Be Considered A Small Business Your Company Must Have Less Than 1,000 Employees. This Notice Is To Determine The Marketplace For This Specific Requirement. Please Check One Of The Following: [ ] Yes [ ] No Service Disabled Veteran Owned Small Business (sdvosb) [ ] Yes [ ] No Veteran Owned Small Business (vosb) [ ] Yes [ ] No Small Business Manufacturers [ ] Yes [ ] No All Other Small Business (sb) [ ] Yes [ ] No Other Than Small Business 3) Any Service-disabled Veteran Owned Businesses Or Veteran Owned Businesses Who Respond To A Solicitation On This Project Must Provide A Sba Certification And Be Registered With U.s. Small Business Administration Veteran Small Business Certification (vetcert) Located At Https://veterans.certify.sba.gov/. 4) Only Authorized Service Representatives/providers Of The Manufacturer Will Be Considered. No Used, Refurbished, Remanufactured, Or Counterfeit Parts Will Be Allowed. Please Provide A Proof Of Authorized Service Provider Letter From Manufacturer. 5) Please Complete The Attached Price List (attachment C). This Is Not A Quote. 6) Capabilities Statement Addressing The Requirements In The Statement Of Work To Include: References For Similar Services Currently Being Provided Or Previously Provided At The Required Service Levels As Outlined In The Statement Of Work. The Government Is Not Obligated To Nor Will It Pay For Or Reimburse Any Costs Associated With Responding To This Sources Sought Notice. This Notice Shall Not Be Construed As A Commitment By The Government To Issue A Solicitation Or Ultimately Award A Contract, Nor Does It Restrict The Government To A Particular Acquisition Approach. The Government Will In No Way Be Bound To This Information If Any Solicitation Is Issued. Notice To Potential Offerors: All Offerors Who Provide Goods Or Services To The United States Federal Government Must Be Registered In The System Award Management (sam Located On The Web At Www.sam.gov). It Is Desirable That Any Offeror To Have Completed Their Business Online Representations And Certifications Application In The System For Award Management (sam). Service Address: Various Stations In Nco 20 See Attachment Point Of Contact: Peter Park Contracting Officer Peter.park2@va.gov Response Deadline: 12/20/2024 By 3:00pm Pacific Time Statement Of Work: Bpa For Visn 20 Cprr Urinalysis Testing Bpa Language The Government Will Award A Cprr Bpa To A Single Contractor For Urinalysis Testing. Contractor Agrees To The Following Terms Of The Bpa Exclusively With Visn 20 And Awarded In The Final Bpa. Under This Agreement, The Bpa Holder Shall Provide Cprr Urinalysis Testing For All Visn20 Medical Facilities. The Vha Facilities Within Visn20 Listed On This Bpa Are Authorized To Order Any Item Listed On The Price/cost Schedule At The Listed Price. No Items May Be Ordered Off This Bpa Unless They Are Listed On The Price/cost Schedule. Additional, Related Items May Be Added Without Further Competition To The Price/cost Schedule With The Award Of A Modification By The Administering Contracting Officer (co). The Administering Co Is The Only Vha Employee Authorized To Modify This Bpa. Obligation Of Funds This Bpa Does Not Obligate Any Funds. The Government Is Only Obligated To The Extent Of Authorized Task Orders Issued Under This Bpa. Period Of Agreement This Bpa Is Effective From The Date Of Award For A Period Of 5 Years. Option To Extend The Term Of The Bpa The Government May Extend The Term Of This Bpa For A Period Of Up To Six (6) Months, Exercisable In Increments Of Not Less Than One (1) Month. By Written Notice To The Contractor At Any Time Prior To The Expiration Of The Bpa, Provided That The Government Shall Give The Contractor A Preliminary Written Notice Of Its Intent To Extend At Least 30 Days Before The Bpa Expires. The Preliminary Notice Does Not Commit The Government To An Extension. Prices And Terms Visn20 Has Provided An Estimated Annual Volume By Test As Reflected In Attachment A. Pricing Is Based On The Average Annual Test Volume. The Government Estimates The Volumes As Listed In Attachment A But Does Not Guarantee Volumes As Listed; They Are Estimates Only And The Government Doesn T Guarantee That All Listed Stations Will Participate In The Bpa. The Government Estimates, But Does Not Guarantee, That Individual Bpa Orders Placed Against This Agreement May Reach $825,000.00/per Order. This Order Limit May Be Increased By Mutual Agreement Of The Parties As Necessary, In Whole Or Part. The Authorized Ceiling Limit Of The Agreement Is Set At $4,500,000.00 Over The Period Covered By The Agreement; This Ceiling Is Also Not A Guarantee. The Ceiling Limit May Also Be Raised In Association With Order Limit Increases Or Other Conditions Which, By Mutual Agreement Of The Parties, Maybe Considered Necessary. Authorization For Individual Task Orders Above The Stated Task Order And/or Ceiling Limits Must Be Coordinated Through The Contracting Officer Before Larger Valued Orders Can Be Issued And Prior To Commencement Of Work. All Unauthorized Work, Regardless Of Amount, Will Be Processed Through The Ratification Process. Price/cost Schedule Estimated Quantities And Pricing Per Facility Order Placement All Properly Warranted Cos Serving Visn20 Are Authorized To Place Orders Under This Bpa. Task Orders Will Be Placed Against This Bpa Using Outlook Email Messages, Electronic Data Interchange (edi), Fax Internet Portal, Paper Or Oral Communications. Delivery Order Oversight Each Ordering Location Will Designate A Contracting Officer's Representative (cor) Or Poc (if Dollar Amounts Warrant A Cor, And Subject To Co Approval), Who Will Be Responsible For Verifying Contract Compliance And Certify Invoices. Requirement Specifications / Statement Of Work Scope: The Contractor Shall Provide Automated Clinical Laboratory Urinalysis Testing For Urine Dipstick Chemistries, Urine Microscopic Analysis, And Body Fluid Analysis (as Applicable) To Produce Cost Per Reportable Results (cprr) For The Locations Listed Below. Installation And Operational Training Will Be Provided By The Vendor At The Government S Facility. Vendor Will Provide Field Service Support. Vendor Will Also Supply Government With Sufficient Supplies, Reagents, And Training To Execute The Urinalysis Analyzer In The Performance Of The Testing Listed For Each Site Based On Estimated Patient Results Per Month. Equipment Will Be Defined By The Facility. Participating Locations: Alaska Va Healthcare System: 1201 North Muldoon Road, Anchorage, Ak 99504 Boise Va Medical Center: 500 West Fort Street. Boise, Id 83702 Eugene Health Care Center: 3355 Chad Dr., Eugene, Or 97408 Va Portland Health Care System: 3710 Sw U.s. Veterans Hospital Road, Portland, Or 97239 Roseburg Va Health Care System: 913 Nw Garden Valley Blvd., Roseburg, Or 97471 Va Southern Oregon Rehabilitation Center: 8495 Crater Lake Hwy., White City, Or 97503 Va Puget Sound Health Care System - American Lake Division: 9600 Veterans Dr Southwest, Tacoma, Wa 98493 Va Puget Sound Health Care System: 1660 S. Columbian Way, Seattle, Wa 98108 Mann-grandstaff Va Medical Center: 4815 N. Assembly Street, Spokane, Wa 99205 Jonathan M. Wainwright Memorial Va Medical Center: 77 Wainwright Drive, Walla Walla, Wa 99362 Map And Locations For Medical Centers And Clinics Within The Visn 20 Northwest Network Can Be Found At The Following Link: Https://www.va.gov/directory/guide/region.asp?id=1020. General Requirements: Leased (cost Per Reportable Result) Equipment. All Related Consumables And Supplies. All Necessary Service To Keep Equipment In Manufacturer's Operating Conditions, Both Preventive Maintenance And Emergency Repairs. Training For Personnel Operating Equipment. Cost Per Reportable Result Cprr: Cost Per Patient Reportable Result (cprr): As Defined In The Federal Supply Schedule Fsc Group 66, Part Iii, Cost-per-test Clinical Laboratory Analyzers - Contractors Are Required To Provide A Price For A Reportable Patient Result. The Per Patient Reportable Result Price Shall Include Costs Covering: (1) 5-year Equipment Use, (2) All Reagents, Standards, Vendor Provided Quality Controls, Supplies, Consumable/disposable Items, Parts, Accessories, And Any Other Item Required For The Proper Operation Of The Contractor S Equipment And Necessary For The Generation Of A Patient Reportable Result. This Per Patient Reportable Result Price Shall Also Encompass All Costs Associated With Dilution; Repeat And Confirmatory Testing Required To Produce A Single Patient Reportable Result. It Shall Also Include The Material To Perform As Well As All Other Costs Associated With Quality Control, Calibration And Correlation Study Testing That Is Prescribed By The Clinical And Laboratory Standards Institute (clsi). (3) All Necessary Maintenance To Keep The Equipment In Good Operating Condition (this Element Includes Both Preventive Maintenance And Emergency Repairs) And (4) Training For Government Personnel. Contractors Shall Provide Delivery, Installation And Removal Of Equipment At No Additional Charge. Parameters: The Calculation For Price And Quantity Of Reagents In The Annual List Included In The Contract As Based On An Estimated Annual Number Of Reportable Results Provided By The Government. The Annual Quantities Of Supplies Shall Be Sufficient For Testing As Long As The Reportable Results Are Submitted In Compliance With The Following Parameters: Numbers Of Reportable Results Actually Performed By The Government Are Within Ten Percent Of The Annual Estimated Reportable Results As Indicated By The Annual Supply List. Use Of The Instrument(s) Are In Accordance With Instrument Usage Information Provided By Government (primary, Back-up Or Alternate). Test Volumes Are Determined By The Government. No More Than 10 Percent Repeats. Two Levels Of Quality Control To Be Run As Required By The Manufacturer Every Test Day. Calibrators For Periodic Calibration Checks And Demand To Validate Systems Following Major Repair Or Resolution Of Negative Quality Control Trends. Adjustments: The Government And Vendor Will Conduct Ongoing Reviews No Less Than Annually To Monitor Contract Performance Against Agreed Upon Efficiencies, Operational Assumptions, And Product Utilization (cppr Parameters). The Vendor Will Notify The Government When Such Reviews Indicate An Adjustment To The Quarterly Standing Order Shipments May Be Required. The Government Will Cooperate With The Vendor In The Conduct Of The Reviews. Vendor, Their Personnel, And Their Sub Vendors Shall Be Subject To The Federal Laws, Regulations, Standards, And Va Directives And Handbooks Regarding Information And Information System Security As Delineated In This Contract.839.201 Contract Clause For Information And Technology Security. Equipment: Vendor Will Provide Urinalysis Analyzer(s) For Lease To Meet Visn20 Facilities Usage Needs. Installation: The Vendor Shall Deliver And Install All Rented Or Purchased Equipment Under This Contract After An Order Is Placed. Equipment Shall Be Installed Within 30 Business Days After Receipt Of Order. Equipment Shall Not Be Considered Installed Until Va Employee Certifies That The Equipment Is Properly Functioning And Has The Necessary Supplies To Perform Its Required Function. The Vendor Shall Maintain A Record Of Installation To Include: Location, Model Number, Serial Number, And Date Of Installation. Removal: The Vendor Shall Un-install And Remove All Rented Equipment Under This Bpa From The Requesting Facility Upon Request. Equipment Shall Be Removed Within 30 Days Of Request. Equipment Shall Be Considered Removed Upon A Va Employee Certification That The Equipment And All Accessories Have Been Taken By An Employee Of The Vendor And There Is No Disruption And /or Damage To The Surrounding Area. The Vendor Shall Maintain A Record Of Removal To Include: Location, Model Number, Serial Number, And Date Of Removal. Equipment Requirements: Vendor Shall Provide Urinalysis Systems That Meet The Following Requirements: Instrument Shall Include Chemical Analysis Of Urine (to Include Bilirubin, Urobilinogen, Ph, Specific Gravity, Glucose, Protein, Blood, Nitrites, Ketones And Leukoesterase) Without Interference From Urines With Common Abnormal Colors (red, Orange, Etc.). Instrument Shall Also Identify Formed Elements Including But Not Limited To, Red Blood Cells, White Blood Cells, Epithelial Cells (differentiating Transitional, Renal, And Squamous) Crystals, Casts, Bacteria, And Yeast Without The Need To Consistently Verify With Manual Microscopy. There Must Be A Direct, Automated Specimen Pathway Between The Chemistry Urinalysis Specimen Sampling And Testing And The Microscopic Urinalysis Sampling And Testing. Equipment Shall Provide Accurate Test Assay Results For Sample Specimens Up To The Manufacturer's Defined Maximum Tests Per Hour Without Excessive Malfunctions, Breakdowns, Or Service Calls. Instrumentation Shall Have Auto Reflex Testing Capability For Specimens Which Require Sediment Analysis. System Shall Have A Minimum Throughput Of 60 Samples Per Hour On The Microscopic Side. The Instrument Shall Have Customer Defined Rule Criteria To Reduce The Number Of Manual Reviews And Off-line Testing Required By The Operator. The System Shall Have The Ability For Auto-validation, Should The Facility Choose To Auto Validate Results. Instrument Shall Auto-classify Formed Elements With Limited Review By The Operator. Microscopic Analysis Must Be Fully Quantitative. Microscopic Analysis Must Have The Ability For The Instrument To Identify Cellular Microscopic Components And Provide Reviewable Digital Images. Instrument Must Offer Limited To No Carryover From Sample To Sample To Reduce Interference. Instrument Must Have The Ability To Continuously Feed At Least 300 Chemistry Strips Without Operator Re-load. Time From Standby To Operation Processing Samples Is Less Than 3 Minutes. Time Required For Routine Maintenance Activities Shall Take Less Than 30 Minutes Daily And Less Than 30 Minutes Weekly/monthly. All Testing Shall Be Fda Approved, Including Body Fluids If Available. Current Waste Stream Analysis And Sds (safety Data Sheets) Shall Be Provided To All Locations. Editable Electronic Copy In Clsi (clinical And Laboratory Standards Institute) Format Of Operating Procedures Shall Be Furnished With Each Instrument Supplied To All Participating Facilities. Testing Shall Include Current Laboratory Assays, But The Va Reserves The Right To Add Additional Tests To Test Menu. Protocols In Place For Various Degrees Of Urine Turbidity. A Selection Of Instruments Will Be Available Based On Volume, Test Menu Needs And Throughput Requirements Of Each Individual Facility. Instrument Shall Allow Patient Sample To Be Used For Repeats Or Reruns On The Same Or Different Instrument. All Instruments Must Be New (non-refurbished) Equipment. Contractor Shall Provide All Upgrades To The Equipment Hardware And Operating System Software, At No Additional Cost To The Government. (note Current Va Security Regulations Require Windows Based Operating Systems Be Windows 10 Or Higher). Instruments That Have The Ability To Have Access To The Internet Must Follow Va It Security Policies. The Internet Access Must Be Verified And Adhered To Before And During All Internet Access. Contractor S Software Is Required To Be Compatible And Interface Immediately Upon Award With Governmental Systems Which Include Cprs, Vista, And Cerner. Contractor Must Provide Evidence With Their Solicitation Response That Their Software Is Already Accepted For Use By Vha It Systems. All Equipment Shall Come With Any Required Accessories To Perform Normal Duties, To Include But Not Limited To, Properly Programmed Printers And Monitors, And Ups. The Analyzers Will Be Va Laboratory Information System (lis) Interfaceable, And The Vendor Will Supply Lis Specifications And Assist With The Interface Connections. Operation Of Software Uses Minimal Computer Strokes To Move From Testing To Reagent To Data Analysis Or/and Other Screens. Size Of Instrumentation Shall Be No More Than 65 W X 21 D. If Stand Is Required, It Is Included In The Contract At No Additional Cost. Upgrades Shall Be Delivered And Installed Within 60 Days Of Issuance To The Commercial Market. An Operator's Manual Shall Be Furnished With Each Instrument Supplied To Va And Updates To Manual Shall Be Provided In A Timely Manner. Uptime Guarantee/ Performance Penalty: Vendor Agrees That All Equipment Provided Shall Be Operable And Available For Use No Less Than 98% Of Operational Time Per Month. Each Instrument At Site Shall Be Computed Separately. Operational Time Is 24 Hours Per Day 7 Days A Week. Downtime Is Defined As When The Vendor Is Not Able To Produce Clinically Acceptable Results On The System Monitor And Will Be Computed From The Time The Government Notified The Hotline During Normal Working Hours Until The Field Service Engineer Returns The Instrument To The Government And The Government Can Produce Acceptable Clinical Results. Scheduled Maintenance Is Excluded From Downtime. Method Validations: Once The Instrument Has Been Installed According To The Vendor Specifications At The Government Location The Vendor Will Supply A Technical Representative To Perform Method Validation Studies During All Equipment Installations At All Facilities. The Method Validations Will Be Completed To Include The Necessary Studies Required For Clinical Laboratory Information Act (clia), College Of American Pathologist (cap) And Department Of Veterans Affairs (va) Regulatory Agencies And Shall Include Precision, Linearity And Current System To New System Correlations As Well As Establishment Of Normal And Therapeutic Ranges. The Va Will Not Accept Equipment Until It Passes All Validation Testing. Validation Testing Will Be Conducted On The Facilities Primary And Secondary Testing Methods. The Va Will Provide All The Samples Necessary For The Validation Studies. Maintenance And Repairs: Vendor Shall Provide Preventative And Corrective Maintenance Per Manufacturer's Recommendation. This Shall Include Software Upgrades And Parts And Labor, To Maintain All Urinalysis Equipment And Accessories. At A Minimum, Preventative Maintenance Shall Be Twice Annually, Beginning Six (6) Months After Installation. Vendor Will Furnish All Transportation, Equipment, Tools And Labor To Accomplish The Required Maintenance. Emergency Repairs Shall Be Performed After Initial Telephone Notification That The Equipment Is Inoperative. The Field Service Representative Will Call To Schedule Onsite Service Within 2 Hours Of Notification From Technical Assistance Hotline If Necessary. The Vendor Shall Provide The Government With A Designated Point Of Contact And Telephone Number And Shall Make Arrangements To Enable His Maintenance Representative To Receive Such Notification. Telephone Service Support Shall Be Available 24 Hours/day,7days A Week. Onsite Field Service Support Shall Be Available Monday- Friday 8am- 4:30 Pm (local Time). Onsite Repairs Shall Be Initiated Within 24 Hours Of First Notification From Technical Hotline To Field Service Engineer. Efforts Shall Be Made By The Vendor To Minimize Disruption To Governments And Employees (i.e. Reschedule If Work Interferes With Normal Operation, Access Equipment When Convenient To The Needs Of The Va, Etc.) Vendor Shall Maintain Cleanliness Of Work Area And Minimize Dust And Contaminants To Areas Adjacent To The Job Site. Vendor Shall Furnish A Malfunction Incident Report To The Installation Upon Completion Of Repair Call Within 2 Business Days After The Completion Of Work. The Report Shall Include As A Minimum The Following: Date And Time Notified. Date And Time Of Arrival. Serial Number, Type And Model Number(s) Of Equipment. Time Spent For Repair. Description Of Malfunction And Repair. Proof Of Repair That Included Documentation Of A Sample Run Of Quality Control Verifying Acceptable Performance. Each Instrument Provided By The Vendor Shall Maintain An Uptime Of 98% In Each Month Of The Term Of The Agreement. During The Term Of The Contract, Should The Repair Record Of Any Individual Piece Of Laboratory Equipment Reflect A Downtime Of 5% Or Greater Of The Normal Working Days In One Calendar Month, It Is The Responsibility Of The Vendor To Immediately Replace The Broken Laboratory Equipment With New Equipment At No Additional Cost To The Government. The Responsibility For Maintaining The Equipment Furnished In Operating Condition In Accordance To Manufacturer's Instruction, Shall Solely Be The Responsibility Of The Vendor. The Contractor Shall Not Leave A Service Call Open Pending Verification That Repairs Are Completed By The Contractor's Maintenance Personnel. For Each Instrument Provided, The Vendor Shall Treat Each Notification For An Emergency/repair Service Call Form The Government As A Separate And New Service Call. The Following Are Guaranteed Throughout The Life Of This Contract: Priority Scheduling Of Requests For Service. Unlimited Emergency Service. No Charges For Labor, Travel Or Any Other Related Expenses. Unlimited Parts. No Charge For Replacement Parts Which Become Marginal Or Defective Due To Normal Use During Agreement Period. Factory Authorized Product Updates And Modifications. Installed At No Additional Charge For Improved Product Performance And Reliability. Factory Trained And Authorized Service Engineers. Continual Upgrading And Certification Of Engineers In Latest Instrument Technology. Training: With The Exception Of Specific Training Requirements Stated Herein, Which Shall Have Precedence; Vendor Shall Provide "operator" Training In Accordance With The Terms, Conditions, And Provisions Of The Vendor's Existing Federal Supply Service Contract. Listed Below Are The Training Requirements: The Vendor Shall Provide, At No Cost To The Government, On-site Training And Key Operator Training For At Least 2 Operators Per Instrument Per Site. Provide Initial In-depth Training For Two Key Operators At The Facility And For Each Individual Instrument Provided. Provide Annual Training For One Va Equipment Operator, Per Each Instrument, For The Participating Medical Center. Provide On-site Vendor Operator Training For All Personnel Who Will Run Instrument With Training Provided For All Applicable Shifts. The Vendor Shall Have An On-going Training Program For Employees By The Technical Service Representatives On Any New Products Or Updates On The Product Lines. All Materials For Training Will Be Provided At No Additional Cost To The Government. The Vendor Will Provide Competency Assessment Protocols For Use At Each Site Consistent With Federal (clia) And Cap Training Requirements. Reagents, Controls And Supplies: Routine Reagents, Controls And Disposables (supplies) For Chemical And Microscopic Urinalysis Testing Shall Be Provided By The Vendor And Shall Adhere To The Following Requirements. Reagents Including Controls And Disposables Shall Be Identified Prior To Delivery. Reagents Including Controls And Disposables To Be Listed In A Separate Table. The Table Should Include Annual Reagent Volumes, Costs, And Shipping Charges For Each Quarterly Standing Order Delivery. Reagent Manufacturer Shelf Life Shall Be No Less Than 12 Months. Reagents For The Analyzer Are Marked For Easy Recognition By The Operator And Shall Contain The Appropriate Facility Purchase Order Number In The Delivery Address. Vendor Will Supply A List Of Reagents, Controls And Disposables That Will Be Shipped As Part Of The Order. Supplies Will Be Shipped On A Standing Order Schedule, Agreed Upon By The Government And Vendor. All Or Part Of A Future Quarterly Standing Order May Be Advanced Up To 10 Days Ahead Of The Scheduled Ship Date Of The Standing Order. Delivery Shall Be Within Four (4) Business Days Of The Prior Agreed Upon Shipment Date Or It Shall Be Considered Late. Vendor Will Provide Sufficient Reagents And Supplies For Performance Of Patient Results For All Visn 20 Sites. Consumables Will Be Provided On Demand As Needed If The Consumable Allotments Are Insufficient To Meet The Needs Of The Facility. Vendor Shall Supply All Changes To The Maintenance Schedules That Affect Reagent Or Cleaning Reagent Volumes And Shall Be Coordinated With The Va Facility Point Of Contact To Implement The Changes In Accordance With Manufacturer's Recommendations. Space Availability: All Proposed Urinalysis Equipment Must Fit The Existing Space At Each Visn 20 P&lms Facility's, Without The Need For Renovation Work. Small Scale Re-arrangement Of Furniture Is Acceptable. Fitting Existing Space Shall Include Conforming To The Current Structural Parameters Of Each Lab, In Each Facility, In Terms Of Delivery, Installation And Lab Space. (i.e., Equipment Size, Weight, Packaged Size For Delivery, Electrical/voltage). Special Requirements: In Addition To The General Requirements For The Urinalysis Cprr Requirements Stated Above, The Contractor Shall Meet The Following Special Requirements: Equipment Shall Have A Fully Established Va Veterans Health Information Systems And Technology Architecture (vista) Computer System And Cerner Interface Program Via Data Innovations Middleware, With All Downloads/software Necessary To Transfer Data Into Patient Files In Va Vista And Cerner Computer Systems Via Data Innovations Middleware, At No Additional Cost To Va. Provide Bi-directional Interface With Data Innovations And Appropriate Quality Control Analysis System And All Components Necessary To Interface With Va Vista And Cerner Computer System. The Contractor Shall Provide An Auto Verification Package Through Data Innovations For Validation Utilizing The Instrument Manager Which Includes Rules And Technical Support For The Duration Of This Contract. Contractor Shall Assist In The Establishment, Testing, Deployment, And Troubleshooting In The Full Capacity Of The Middleware Before Implementation Date. The Contractor Is Responsible For Verifying Any Software Upgrades With The Instrument During Its Life, Will Be Compatible With Data Innovations Middleware. Contractor Shall Provide Automated, Walk-away Urinalysis Chemistry Analyzer With Peripherals With Direct, Automated Sample Pathway To An Automated, Walk-away Microscopic Urinalysis Analyzer With Peripherals For Sampling And Testing. Shall Provide Data Backup. Systems Shall Provide Ease Of Use (uncomplicated Menus), With Minimal Maintenance Required. Shall Provide Flexibility In Test Volumes. Shall Be Easy To Troubleshoot. Provide Extended Expiration Date Of Supplies. Uninterruptible Power Supply (surge Protection, Battery Backup) Provided By Vendor For All Associated Electrical Instruments And Ancillary Components Excluding Printer. Provide A Water System, If Required. If A Printer Is Required To Produce Patient Or Qc Reports, One Shall Be Provided Per System And Replaced If Broken. Cessation Of Testing: If, For Any Reason, Contractor Ceases Testing Of Any Urinalysis Assays, The Contractor Must Notify The Va Contracting Office And Laboratories, 60 Calendar Days Prior To The Change. Until A New Solicitation Can Be Issued, Or The Problem Resolved, The Contractor Shall Be Held Liable For All Costs If Performance Is Ceased, As The Lab Facility May Have To Resort To Outsourcing The Tests In Order To Continue Patient Care. The Vendor Will Be Responsible For The Following: Cost Per Reportable Result Program Reagents, Controls And Supplies: Routine Reagents And Disposables. Reagents Including Controls And Disposables To Be Listed In Separate Table. Vendor Will Supply A List Of Reagents, Controls And Disposables That Will Be Shipped As Part Of The Agreement. Supplies Will Be Shipped On A Standing Order Schedule, Agreed Upon By Government And Vendor. All Or Part Of A Future Quarterly Standing Order May Be Advanced Up To 10 Days Ahead Of The Scheduled Ship Date Of The Standing Order. Vendor Will Provide Sufficient Reagents And Supplies For Performance Of Patient Results For All Visn 20 Sites. The Quality Of The Products Shall Be High Enough To Satisfy Proficiency Testing Standards Of The College Of American Pathologists (cap) And The Joint Commission (tjc). Changes In Maintenance Schedules That Affect Reagent Or Cleaning Reagent Volumes Will Be Approved By The Vendor In Accordance With Manufacturer's Recommendations. Additional Reagents, If Required, Will Be Provided By The Vendor At No Additional Charge. The Government Will Be Responsible For The Following: Cost Per Reportable Result Program: Cppr Periodic Payments: Refer To Attachment A For Volumes. Test Description Estimated Volume Per Year Price Per Reportable. During The Agreement The Government Will Report By The 10th Of Each Month, To The Vendor In Writing Or Electronically, The Number Of Reportable Results Generated In The Previous Month. The Vendor Will Invoice The Government Based On The Report Of Reportable Tests. Laboratory Manager Or Designee Will Act As Contracting Officer Representative (cotr) For This Contract. Security: Returning Leased Equipment Constitutes A Risk. Va Employees Must Sanitize Va Sensitive Information Residing On Leased Equipment Before Releasing That Equipment From Direct Va Control, Or The Media Will Not Be Returned Upon Termination Of The Contract. Per Visn 20 Va Information Security Policies, No Hard Drives Or Computer Disks Containing Va Patient Information Will Be Removed From Va Facilities. At The Time Of Turn-in Or Removal Due To Failure, The Va Facility Will Remove All Sensitive Data From Information Systems Storage Devices Or Render The Data From These Systems Unreadable. No Federal Information Processing Equipment Will Be Discontinued From Rental/lease Or Exchange Without Compliance With This Require. Contract Personnel Will Not Have Direct Access To A Va System Or Va Sensitive Information. All Work/maintenance Will Be Accomplished By Va Laboratory Personnel As An Intermediary. If Contract Leased/purchased Equipment Contains Sensitive Information (pii/phi) To Be Directly Uploaded To/downloaded From Va Systems, A Mou/isa Shall Be Established Between The Vendor And Va. Unidirectional, Deidentified Data From Contract Leased/purchased Equipment To The Va Network Shall Be Protected In Accordance With Established Va Security Policy. Quality Assurance Monitoring: The Contractor Service Requirements Are Summarized Into Performance Objectives That Relate Directly To Mission Essential Items. The Performance Thresholds Briefly Describe The Minimum Acceptable Levels Of Service Required For Each Requirement. These Thresholds Are Critical To Mission Success. Information And Information System Security/privacy General Contractors, Contractor Personnel, Subcontractors, And Subcontractor Personnel Shall Be Subject To The Same Federal Laws, Regulations, Standards, And Va Directives And Handbooks As Va And Va Personnel Regarding Information And Information System Security. Access To Va Information And Va Information Systems A Contractor/subcontractor Shall Request Logical (technical) Or Physical Access To Va Information And Va Information Systems For Their Employees, Subcontractors, And Affiliates Only To The Extent Necessary To Perform The Services Specified In The Contract, Agreement, Or Task Order. All Contractors, Subcontractors, And Third-party Servicers And Associates Working With Va Information Are Subject To The Same Investigative Requirements As Those Of Va Appointees Or Employees Who Have Access To The Same Types Of Information. The Level And Process Of Background Security Investigations For Contractors Must Be In Accordance With Va Directive And Handbook 0710, Personnel Suitability And Security Program. The Office For Operations, Security, And Preparedness Is Responsible For These Policies And Procedures. Contract Personnel Who Require Access To National Security Programs Must Have A Valid Security Clearance. National Industrial Security Program (nisp) Was Established By Executive Order 12829 To Ensure That Cleared U.s. Defense Industry Contract Personnel Safeguard The Classified Information In Their Possession While Performing Work On Contracts, Programs, Bids, Or Research And Development Efforts. The Department Of Veterans Affairs Does Not Have A Memorandum Of Agreement With Defense Security Service (dss). Verification Of A Security Clearance Must Be Processed Through The Special Security Officer Located In The Planning And National Security Service Within The Office Of Operations, Security, And Preparedness. Custom Software Development And Outsourced Operations Must Be Located In The U.s. To The Maximum Extent Practical. If Such Services Are Proposed To Be Performed Abroad And Are Not Disallowed By Other Va Policy Or Mandates, The Contractor/subcontractor Must State Where All Non-u.s. Services Are Provided And Detail A Security Plan, Deemed To Be Acceptable By Va, Specifically To Address Mitigation Of The Resulting Problems Of Communication, Control, Data Protection, And So Forth. Location Within The U.s. May Be An Evaluation Factor. The Contractor Or Subcontractor Must Notify The Contracting Officer Immediately When An Employee Working On A Va System Or With Access To Va Information Is Reassigned Or Leaves The Contractor Or Subcontractor's Employ. The Contracting Officer Must Also Be Notified Immediately By The Contractor Or Subcontractor Prior To An Unfriendly Termination. Va Information Custodial Language Information Made Available To The Contractor Or Subcontractor By Va For The Performance Or Administration Of This Contract Or Information Developed By The Contractor/subcontractor In Performance Or Administration Of The Contract Shall Be Used Only For Those Purposes And Shall Not Be Used In Any Other Way Without The Prior Written Agreement Of The Va. This Clause Expressly Limits The Contractor/subcontractor's Rights To Use Data As Described In Rights In Data - General, Far 52.227-14(d) (1). Va Information Should Not Be Co-mingled, If Possible, With Any Other Data On The Contractors/subcontractor's Information Systems Or Media Storage Systems In Order To Ensure Va Requirements Related To Data Protection And Media Sanitization Can Be Met. If Co-mingling Must Be Allowed To Meet The Requirements Of The Business Need, The Contractor Must Ensure That Va's Information Is Returned To The Va Or Destroyed In Accordance With Va's Sanitization Requirements. Va Reserves The Right To Conduct On Site Inspections Of Contractor And Subcontractor It Resources To Ensure Data Security Controls, Separation Of Data And Job Duties, And Destruction/media Sanitization Procedures Are In Compliance With Va Directive Requirements. Prior To Termination Or Completion Of This Contract, Contractor/ Subcontractor Must Not Destroy Information Received From Va, Or Gathered/ Created By The Contractor In The Course Of Performing This Contract Without Prior Written Approval By The Va. Any Data Destruction Done On Behalf Of Va By A Contractor/subcontractor Must Be Done In Accordance With National Archives And Records Administration (nara) Requirements As Outlined In Va Directive 6300, Records And Information Management And Its Handbook 6300.1 Records Management Procedures, Applicable Va Records Control Schedules, And Va Handbook 6500.1, Electronic Media Sanitization. Self-certification By The Contractor That The Data Destruction Requirements Above Have Been Met Must Be Sent To The Va Contracting Officer Within 30 Days Of Termination Of The Contract. The Contractor/subcontractor Must Receive, Gather, Store, Back Up, Maintain, Use, Disclose And Dispose Of Va Information Only In Compliance With The Terms Of The Contract And Applicable Federal And Va Information Confidentiality And Security Laws, Regulations, And Policies. If Federal Or Va Information Confidentiality And Security Laws, Regulations And Policies Become Applicable To The Va Information Or Information Systems After Execution Of The Contract, Or If Nist Issues Or Updates Applicable Fips Or Special Publications (sp) After Execution Of This Contract, The Parties Agree To Negotiate In Good Faith To Implement The Information Confidentiality And Security Laws, Regulations, And Policies In This Contract. The Contractor/subcontractor Shall Not Make Copies Of Va Information Except As Authorized And Necessary To Perform The Terms Of The Agreement Or To Preserve Electronic Information Stored On Contractor/subcontractor Electronic Storage Media For Restoration In Case Any Electronic Equipment Or Data Used By The Contractor/subcontractor Needs To Be Restored To An Operating State. If Copies Are Made For Restoration Purposes, After The Restoration Is Complete, The Copies Must Be Appropriately Destroyed. If Va Determines That The Contractor Has Violated Any Of The Information Confidentiality, Privacy, And Security Provisions Of The Contract, It Shall Be Sufficient Grounds For Va To Withhold Payment To The Contractor Or Third Party Or Terminate The Contract For Default Or Terminate For Cause Under Federal Acquisition Regulation (far) Part 12. If A Vha Contract Is Terminated For Cause, The Associated Baa Must Also Be Terminated And Appropriate Actions Taken In Accordance With Vha Handbook 1600.01, Business Associate Agreements. Absent An Agreement To Use Or Disclose Protected Health Information, There Is No Business Associate Relationship. The Contractor/subcontractor Must Store, Transport, Or Transmit Va Sensitive Information In An Encrypted Form, Using Va-approved Encryption Tools That Are, At A Minimum, Fips 140-2 Validated. The Contractor/subcontractor's Firewall And Web Services Security Controls, If Applicable, Shall Meet Or Exceed Va's Minimum Requirements. Va Configuration Guidelines Are Available Upon Request. Except For Uses And Disclosures Of Va Information Authorized By This Contract For Performance Of The Contract, The Contractor/subcontractor May Use And Disclose Va Information Only In Two Other Situations: (i) In Response To A Qualifying Order Of A Court Of Competent Jurisdiction, Or (ii) With Va's Prior Written Approval. The Contractor/subcontractor Must Refer All Requests For, Demands For Production Of, Or Inquiries About, Va Information And Information Systems To The Va Contracting Officer For Response. Notwithstanding The Provision Above, The Contractor/subcontractor Shall Not Release Va Records Protected By Title 38 U.s.c. 5705, Confidentiality Of Medical Quality Assurance Records And/or Title 38 U.s.c. 7332, Confidentiality Of Certain Health Records Pertaining To Drug Addiction, Sickle Cell Anemia, Alcoholism Or Alcohol Abuse, Or Infection With Human Immunodeficiency Virus. If The Contractor/subcontractor Is In Receipt Of A Court Order Or Other Requests For The Above Mentioned Information, That Contractor/subcontractor Shall Immediately Refer Such Court Orders Or Other Requests To The Va Contracting Officer For Response. For Service That Involves The Storage, Generating, Transmitting, Or Exchanging Of Va Sensitive Information But Does Not Require C&a Or An Mou-isa For System Interconnection, The Contractor/subcontractor Must Complete A Contractor Security Control Assessment (csca) On A Yearly Basis And Provide It To The Cor. Information System Design And Development Information Systems That Are Designed Or Developed For Or On Behalf Of Va At Non-va Facilities Shall Comply With All Va Directives Developed In Accordance With Fisma, Hipaa, Nist, And Related Va Security And Privacy Control Requirements For Federal Information Systems. This Includes Standards For The Protection Of Electronic Phi, Outlined In 45 C.f.r. Part 164, Subpart C, Information And System Security Categorization Level Designations In Accordance With Fips 199 And Fips 200 With Implementation Of All Baseline Security Controls Commensurate With The Fips 199 System Security Categorization (reference Appendix D Of Va Handbook 6500, Va Information Security Program). During The Development Cycle A Privacy Impact Assessment (pia) Must Be Completed, Provided To The Cor, And Approved By The Va Privacy Service In Accordance With Directive 6507, Va Privacy Impact Assessment. The Contractor/subcontractor Shall Certify To The Cor That Applications Are Fully Functional And Operate Correctly As Intended On Systems Using The Va Federal Desktop Core Configuration (fdcc), And The Common Security Configuration Guidelines Provided By Nist Or The Va. This Includes Internet Explorer 7 Configured To Operate On Windows Xp And Vista (in Protected Mode On Vista) And Future Versions, As Required. The Standard Installation, Operation, Maintenance, Updating, And Patching Of Software Shall Not Alter The Configuration Settings From The Va Approved And Fdcc Configuration. Information Technology Staff Must Also Use The Windows Installer Service For Installation To The Default "program Files" Directory And Silently Install And Uninstall. Applications Designed For Normal End Users Shall Run In The Standard User Context Without Elevated System Administration Privileges. The Security Controls Must Be Designed, Developed, Approved By Va, And Implemented In Accordance With The Provisions Of Va Security System Development Life Cycle As Outlined In Nist Special Publication 800-37, Guide For Applying The Risk Management Framework To Federal Information Systems, Va Handbook 6500, Information Security Program And Va Handbook 6500.5, Incorporating Security And Privacy In System Development Lifecycle. The Contractor/subcontractor Is Required To Design, Develop, Or Operate A System Of Records Notice (sor) On Individuals To Accomplish An Agency Function Subject To The Privacy Act Of 1974, (as Amended), Public Law 93-579, December 31, 1974 (5 U.s.c. 552a) And Applicable Agency Regulations. Violation Of The Privacy Act May Involve The Imposition Of Criminal And Civil Penalties. The Contractor/subcontractor Agrees To: Comply With The Privacy Act Of 1974 (the Act) And The Agency Rules And Regulations Issued Under The Act In The Design, Development, Or Operation Of Any System Of Records On Individuals To Accomplish An Agency Function When The Contract Specifically Identifies: The Systems Of Records (sor); And The Design, Development, Or Operation Work That The Contractor/ Subcontractor Is To Perform Include The Privacy Act Notification Contained In This Contract In Every Solicitation And Resulting Subcontract And In Every Subcontract Awarded Without A Solicitation, When The Work Statement In The Proposed Subcontract Requires The Redesign, Development, Or Operation Of A Sor On Individuals That Is Subject To The Privacy Act; And Include This Privacy Act Clause, Including This Subparagraph (3), In All Subcontracts Awarded Under This Contract Which Requires The Design, Development, Or Operation Of Such A Sor. In The Event Of Violations Of The Act, A Civil Action May Be Brought Against The Agency Involved When The Violation Concerns The Design, Development, Or Operation Of A Sor On Individuals To Accomplish An Agency Function, And Criminal Penalties May Be Imposed Upon The Officers Or Employees Of The Agency When The Violation Concerns The Operation Of A Sor On Individuals To Accomplish An Agency Function. For Purposes Of The Act, When The Contract Is For The Operation Of A Sor On Individuals To Accomplish An Agency Function, The Contractor/subcontractor Is Considered To Be An Employee Of The Agency. "operation Of A System Of Records" Means Performance Of Any Of The Activities Associated With Maintaining The Sor, Including The Collection, Use, Maintenance, And Dissemination Of Records. "record" Means Any Item, Collection, Or Grouping Of Information About An Individual That Is Maintained By An Agency, Including, But Not Limited To, Education, Financial Transactions, Medical History, And Criminal Or Employment History And Contains The Person's Name, Or Identifying Number, Symbol, Or Any Other Identifying Particular Assigned To The Individual, Such As A Fingerprint Or Voiceprint, Or A Photograph. "system Of Records" Means A Group Of Any Records Under The Control Of Any Agency From Which Information Is Retrieved By The Name Of The Individual Or By Some Identifying Number, Symbol, Or Other Identifying Particular Assigned To The Individual. The Vendor Shall Ensure The Security Of All Procured Or Developed Systems And Technologies, Including Their Subcomponents (hereinafter Referred To As "systems"), Throughout The Life Of This Contract And Any Extension, Warranty, Or Maintenance Periods. This Includes, But Is Not Limited To Workarounds, Patches, Hotfixes, Upgrades, And Any Physical Components (hereafter Referred To As Security Fixes) Which May Be Necessary To Fix All Security Vulnerabilities Published Or Known To The Vendor Anywhere In The Systems, Including Operating Systems And Firmware. The Vendor Shall Ensure That Security Fixes Shall Not Negatively Impact The Systems. The Vendor Shall Notify Va Within 24 Hours Of The Discovery Or Disclosure Of Successful Exploits Of The Vulnerability Which Can Compromise The Security Of The Systems (including The Confidentiality Or Integrity Of Its Data And Operations, Or The Availability Of The System). Such Issues Shall Be Remediated As Quickly As Is Practical, But In No Event Longer Than 10 Days. When The Security Fixes Involve Installing Third Party Patches (such As Microsoft Os Patches Or Adobe Acrobat), The Vendor Will Provide Written Notice To The Va That The Patch Has Been Validated As Not Affecting The Systems Within 10 Working Days. When The Vendor Is Responsible For Operations Or Maintenance Of The Systems, They Shall Apply The Security Fixes Within 10 Days. All Other Vulnerabilities Shall Be Remediated As Specified In This Paragraph In A Timely Manner Based On Risk, But Within 60 Days Of Discovery Or Disclosure. Exceptions To This Paragraph (e.g. For The Convenience Of Va) Shall Only Be Granted With Approval Of The Contracting Officer And The Va Assistant Secretary For Office Of Information And Technology. Information System Hosting, Operation, Maintenance, Or Use For Information Systems That Are Hosted, Operated, Maintained, Or Used On Behalf Of Va At Non-va Facilities, Contractors/subcontractors Are Fully Responsible And Accountable For Ensuring Compliance With All Hipaa, Privacy Act, Fisma, Nist, Fips, And Va Security And Privacy Directives And Handbooks. This Includes Conducting Compliant Risk Assessments, Routine Vulnerablity Scanning, System Patching And Change Management Procedures, And The Completion Of An Acceptable Contingency Plan For Each System. The Contractor's Security Control Procedures Must Be Equivalent, To Those Procedures Used To Secure Va Systems. A Privacy Impact Assessment (pia) Must Also Be Provided To The Cor And Approved By Va Privacy Service Prior To Operational Approval. All External Internet Connections To Va's Network Involving Va Information Must Be Reviewed And Approved By Va Prior To Implementation. Adequate Security Controls For Collecting, Processing, Transmitting, And Storing Of Personally Identifiable Information (pii), As Determined By The Va Privacy Service, Must Be In Place, Tested, And Approved By Va Prior To Hosting, Operation, Maintenance, Or Use Of The Information System, Or Systems By Or On Behalf Of Va. These Security Controls Are To Be Assessed And Stated Within The Pia And If These Controls Are Determined Not To Be In Place, Or Inadequate, A Plan Of Action And Milestones (poa&m) Must Be Submitted And Approved Prior To The Collection Of Pii. Outsourcing (contractor Facility, Contractor Equipment Or Contractor Staff) Of Systems Or Network Operations, Telecommunications Services, Or Other Managed Services Requires Certification And Accreditation (authorization) (c&a) Of The Contractor's Systems In Accordance With Va Handbook 6500.3, Certification And Accreditation And/or The Va Ocs Certification Program Office. Government- Owned (government Facility Or Government Equipment) Contractor-operated Systems, Third Party Or Business Partner Networks Require Memorandums Of Understanding And Interconnection Agreements (mou-isa) Which Detail What Data Types Are Shared, Who Has Access, And The Appropriate Level Of Security Controls For All Systems Connected To Va Networks. The Contractor/subcontractor's System Must Adhere To All Fisma, Fips, And Nist Standards Related To The Annual Fisma Security Controls Assessment And Review And Update The Pia. Any Deficiencies Noted During This Assessment Must Be Provided To The Va Contracting Officer And The Iso For Entry Into Va's Poa&m Management Process. The Contractor/subcontractor Must Use Va's Poa&m Process To Document Planned Remedial Actions To Address Any Deficiencies In Information Security Policies, Procedures, And Practices, And The Completion Of Those Activities. Security Deficiencies Must Be Corrected Within The Timeframes Approved By The Government. Contractor/subcontractor Procedures Are Subject To Periodic, Unannounced Assessments By Va Officials, Including The Va Office Of Inspector General. The Physical Security Aspects Associated With Contractor/ Subcontractor Activities Must Also Be Subject To Such Assessments. If Major Changes To The System Occur That May Affect The Privacy Or Security Of The Data Or The System, The C&a Of The System May Need To Be Reviewed, Retested And Re- Authorized Per Va Handbook 6500.3. This May Require Reviewing And Updating All Of The Documentation (pia, System Security Plan, Contingency Plan). The Certification Program Office Can Provide Guidance On Whether A New C&a Would Be Necessary. The Contractor/subcontractor Must Conduct An Annual Self Assessment On All Systems And Outsourced Services As Required. Both Hard Copy And Electronic Copies Of The Assessment Must Be Provided To The Cor. The Government Reserves The Right To Conduct Such An Assessment Using Government Personnel Or Another Contractor/subcontractor. The Contractor/subcontractor Must Take Appropriate And Timely Action (this Can Be Specified In The Contract) To Correct Or Mitigate Any Weaknesses Discovered During Such Testing, Generally At No Additional Cost. Va Prohibits The Installation And Use Of Personally-owned Or Contractor/ Subcontractor- Owned Equipment Or Software On Va's Network. If Non-va Owned Equipment Must Be Used To Fulfill The Requirements Of A Contract, It Must Be Stated In The Service Agreement, Sow Or Contract. All Of The Security Controls Required For Government Furnished Equipment (gfe) Must Be Utilized In Approved Other Equipment (oe) And Must Be Funded By The Owner Of The Equipment. All Remote Systems Must Be Equipped With, And Use, A Va-approved Antivirus (av) Software And A Personal (host-based Or Enclave Based) Firewall That Is Configured With A Va- Approved Configuration. Software Must Be Kept Current, Including All Critical Updates And Patches. Owners Of Approved Oe Are Responsible For Providing And Maintaining The Anti-viral Software And The Firewall On The Non-va Owned Oe. All Electronic Storage Media Used On Non-va Leased Or Non-va Owned It Equipment That Is Used To Store, Process, Or Access Va Information Must Be Handled In Adherence With Va Handbook 6500.1, Electronic Media Sanitization Upon: (i) Completion Or Termination Of The Contract Or (ii) Disposal Or Return Of The It Equipment By The Contractor/subcontractor Or Any Person Acting On Behalf Of The Contractor/subcontractor, Whichever Is Earlier. Media (hard Drives, Optical Disks, Cds, Back-up Tapes, Etc.) Used By The Contractors/ Subcontractors That Contain Va Information Must Be Returned To The Va For Sanitization Or Destruction Or The Contractor/subcontractor Must Self-certify That The Media Has Been Disposed Of Per 6500.1 Requirements. This Must Be Completed Within 30 Days Of Termination Of The Contract. Bio-medical Devices And Other Equipment Or Systems Containing Media (hard Drives, Optical Disks, Etc.) With Va Sensitive Information Must Not Be Returned To The Vendor At The End Of Lease, For Trade-in, Or Other Purposes. The Options Are: Vendor Must Accept The System Without The Drive; Va's Initial Medical Device Purchase Includes A Spare Drive Which Must Be Installed In Place Of The Original Drive At Time Of Turn-in; Or Va Must Reimburse The Company For Media At A Reasonable Open Market Replacement Cost At Time Of Purchase. Due To The Highly Specialized And Sometimes Proprietary Hardware And Software Associated With Medical Equipment/systems, If It Is Not Possible For The Va To Retain The Hard Drive, Then; The Equipment Vendor Must Have An Existing Baa If The Device Being Traded In Has Sensitive Information Stored On It And Hard Drive(s) From The System Are Being Returned Physically Intact; And Any Fixed Hard Drive On The Device Must Be Non-destructively Sanitized To The Greatest Extent Possible Without Negatively Impacting System Operation. Selective Clearing Down To Patient Data Folder Level Is Recommended Using Va Approved And Validated Overwriting Technologies/methods/tools. Applicable Media Sanitization Specifications Need To Be Pre- Approved And Described In The Purchase Order Or Contract. A Statement Needs To Be Signed By The Director (system Owner) That States That The Drive Could Not Be Removed And That (a) And (b) Controls Above Are In Place And Completed. The Iso Needs To Maintain The Documentation. Security Incident Investigation The Term "security Incident" Means An Event That Has, Or Could Have, Resulted In Unauthorized Access To, Loss Or Damage To Va Assets, Or Sensitive Information, Or An Action That Breaches Va Security Procedures. The Contractor/ Subcontractor Shall Immediately Notify The Cor And Simultaneously, The Designated Iso And Privacy Officer For The Contract Of Any Known Or Suspected Security/privacy Incidents, Or Any Unauthorized Disclosure Of Sensitive Information, Including That Contained In System(s) To Which The Contractor/ Subcontractor Has Access. To The Extent Known By The Contractor/subcontractor, The Contractor/ Subcontractor's Notice To Va Shall Identify The Information Involved, The Circumstances Surrounding The Incident (including To Whom, How, When, And Where The Va Information Or Assets Were Placed At Risk Or Compromised), And Any Other Information That The Contractor/subcontractor Considers Relevant. With Respect To Unsecured Protected Health Information, The Business Associate Is Deemed To Have Discovered A Data Breach When The Business Associate Knew Or Should Have Known Of A Breach Of Such Information. Upon Discovery, The Business Associate Must Notify The Covered Entity Of The Breach. Notifications Need To Be Made In Accordance With The Executed Business Associate Agreement. In Instances Of Theft Or Break-in Or Other Criminal Activity, The Contractor/subcontractor Must Concurrently Report The Incident To The Appropriate Law Enforcement Entity (or Entities) Of Jurisdiction, Including The Va Oig And Security And Law Enforcement. The Contractor, Its Employees, And Its Subcontractors And Their Employees Shall Cooperate With Va And Any Law Enforcement Authority Responsible For The Investigation And Prosecution Of Any Possible Criminal Law Violation(s) Associated With Any Incident. The Contractor/subcontractor Shall Cooperate With Va In Any Civil Litigation To Recover Va Information, Obtain Monetary Or Other Compensation From A Third Party For Damages Arising From Any Incident, Or Obtain Injunctive Relief Against Any Third Party Arising From, Or Related To, The Incident. Liquidated Damages For Data Breach Consistent With The Requirements Of 38 U.s.c. 5725, A Contract May Require Access To Sensitive Personal Information. If So, The Contractor Is Liable To Va For Liquidated Damages In The Event Of A Data Breach Or Privacy Incident Involving Any Spi The Contractor/subcontractor Processes Or Maintains Under This Contract. The Contractor/subcontractor Shall Provide Notice To Va Of A "security Incident" As Set Forth In The Security Incident Investigation Section Above. Upon Such Notification, Va Must Secure From A Non-department Entity Or The Va Office Of Inspector General An Independent Risk Analysis Of The Data Breach To Determine The Level Of Risk Associated With The Data Breach For The Potential Misuse Of Any Sensitive Personal Information Involved In The Data Breach. The Term 'data Breach' Means The Loss, Theft, Or Other Unauthorized Access, Or Any Access Other Than That Incidental To The Scope Of Employment, To Data Containing Sensitive Personal Information, In Electronic Or Printed Form, That Results In The Potential Compromise Of The Confidentiality Or Integrity Of The Data. Contractor Shall Fully Cooperate With The Entity Performing The Risk Analysis. Failure To Cooperate May Be Deemed A Material Breach And Grounds For Contract Termination. Each Risk Analysis Shall Address All Relevant Information Concerning The Data Breach, Including The Following: Nature Of The Event (loss, Theft, Unauthorized Access); Description Of The Event, Including: Date Of Occurrence; Data Elements Involved, Including Any Pii, Such As Full Name, Social Security Number, Date Of Birth, Home Address, Account Number, Disability Code; Number Of Individuals Affected Or Potentially Affected; Names Of Individuals Or Groups Affected Or Potentially Affected; Ease Of Logical Data Access To The Lost, Stolen Or Improperly Accessed Data In Light Of The Degree Of Protection For The Data, E.g., Unencrypted, Plain Text; Amount Of Time The Data Has Been Out Of Va Control; The Likelihood That The Sensitive Personal Information Will Or Has Been Compromised (made Accessible To And Usable By Unauthorized Persons); Known Misuses Of Data Containing Sensitive Personal Information, If Any; Assessment Of The Potential Harm To The Affected Individuals; Data Breach Analysis As Outlined In 6500.2 Handbook, Management Of Security And Privacy Incidents, As Appropriate; And Whether Credit Protection Services May Assist Record Subjects In Avoiding Or Mitigating The Results Of Identity Theft Based On The Sensitive Personal Information That May Have Been Compromised. Based On The Determinations Of The Independent Risk Analysis, The Contractor Shall Be Responsible For Paying To The Va Liquidated Damages In The Amount Of $42.00 Per Affected Individual To Cover The Cost Of Providing Credit Protection Services To Affected Individuals Consisting Of The Following: Notification; One Year Of Credit Monitoring Services Consisting Of Automatic Daily Monitoring Of At Least 3 Relevant Credit Bureau Reports; Data Breach Analysis; Fraud Resolution Services, Including Writing Dispute Letters, Initiating Fraud Alerts And Credit Freezes, To Assist Affected Individuals To Bring Matters To Resolution; One Year Of Identity Theft Insurance With $20,000.00 Coverage At $0 Deductible; And Necessary Legal Expenses The Subjects May Incur To Repair Falsified Or Damaged Credit Records, Histories, Or Financial Affairs. Security Controls Compliance Testing On A Periodic Basis, Va, Including The Office Of Inspector General, Reserves The Right To Evaluate Any Or All Of The Security Controls And Privacy Practices Implemented By The Contractor Under The Clauses Contained Within The Contract. With 10 Working-day's Notice, At The Request Of The Government, The Contractor Must Fully Cooperate And Assist In A Government-sponsored Security Controls Assessment At Each Location Wherein Va Information Is Processed Or Stored, Or Information Systems Are Developed, Operated, Maintained, Or Used On Behalf Of Va, Including Those Initiated By The Office Of Inspector General. The Government May Conduct A Security Control Assessment On Shorter Notice (to Include Unannounced Assessments) As Determined By Va In The Event Of A Security Incident Or At Any Other Time. Training All Contractor Employees And Subcontractor Employees Requiring Access To Va Information And Va Information Systems Shall Complete The Following Before Being Granted Access To Va Information And Its Systems: Sign And Acknowledge (either Manually Or Electronically) Understanding Of And Responsibilities For Compliance With The Contractor Rules Of Behavior, Appendix E Relating To Access To Va Information And Information Systems; Successfully Complete The Va Cyber Security Awareness And Rules Of Behavior Training And Annually Complete Required Security Training; Successfully Complete The Appropriate Va Privacy Training And Annually Complete Required Privacy Training; And Successfully Complete Any Additional Cyber Security Or Privacy Training, As Required For Va Personnel With Equivalent Information System Access [to Be Defined By The Va Program Official And Provided To The Contracting Officer For Inclusion In The Solicitation Document - E.g., Any Role-based Information Security Training Required In Accordance With Nist Special Publication 800-16, Information Technology Security Training Requirements.] The Contractor Shall Provide To The Contracting Officer And/or The Cor A Copy Of The Training Certificates And Certification Of Signing The Contractor Rules Of Behavior For Each Applicable Employee Within 1 Week Of The Initiation Of The Contract And Annually Thereafter, As Required. Failure To Complete The Mandatory Annual Training And Sign The Rules Of Behavior Annually, Within The Timeframe Required, Is Grounds For Suspension Or Termination Of All Physical Or Electronic Access Privileges And Removal From Work On The Contract Until Such Time As The Training And Documents Are Complete.

Details: Description Republic Of The Philippines Department Of Justice Bureau Of Corrections Muntinlupa City Philippine Bidding Documents Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) (procurement/contract No. 009) Sixth Edition July 2020 Bids And Awards Committee 202 Table Of Contents Section I. Invitation To Bid 3 Section Ii. Instructions To Bidders 6 Section Iii. Bid Data Sheet 13 Section Iv. General Conditions Of Contract 19 Section V. Special Conditions Of Contract 24 Section Vi. Specifications 26 Section Vii. Drawings 59 Section Viii. Bill Of Quantities 60 Section Ix. Checklist Of Technical And Financial Documents 61 Section I. Invitation To Bid Republic Of The Philippines Department Of Justice Bureau Of Corrections Muntinlupa City Invitation To Bid Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) 1. The Bureau Of Corrections, Through The National Expenditure Program (nep) Of 2025 Capital Outlay, Intends To Apply The Sum Of Three Hundred Million Pesos Only (₱300,000,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) With Identification Number _epa-009__. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Bureau Of Corrections Now Invites Bids For Provision Of A Detailed Preliminary Architectural And Engineering Design, Detailed Engineering Requirements And Actual Construction Of The Bureau Of Corrections Super Maximum Security Facility, Based On The Final Detailed Architectural And Engineering Design, To Be Approved By The Head Of Procuring Entity Or Its Duly Authorized Representative Conformably With The Minimum Standards Set Forth In The (1) Presidential Decree (pd) No. 1096, National Building Code Of The Philippines (2) Batas Pambansa (bp)blg. 344, An Act To Enhance The Mobility Of Disabled Persons By Requiring Certain Public Buildings, Institutions, Establishments And Public Utilities To Install Facilities And Other Devices (3) National Structural Code Of The Philippines (nscp), Volume I, 2010 (4) Philippine Electrical Code (pec), 2009 (5) Revised Plumbing Code Of The Philippines (6) Revised Irr Of Ra 10575 (7) Republic Act (ra) No. 9514, Revised Fire Code Of The Philippines And (8) Applicable Local Regulations And Ordinances. Completion Of The Works Is Required Within Three Hundred Sixty-five (365) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project Amounting To At Least Fifty Percent (50%) Of The Abc Within The Last Six (6) Years. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act.” Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperatives, And Partnerships Or Organizations With At Least Seventy-five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From Bureau Of Corrections And Inspect The Bidding Documents At The Address Given Below From Monday To Friday From 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On _december 28, 2024 (08:00am To 05:00pm) To January 20, 2025 (01:29 Pm)_____ From The Given Address And Website(s) Below. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity Bucor.gov.ph, Provided That Bidders Shall Pay The Applicable Fee Of Fifty Thousand (₱50,000.00) Pesos Only For The Bidding Documents Not Later Than The Submission Of Their Bids. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person Or By Facsimile. 6. The Bureau Of Corrections Will Hold A Pre-bid Conference On _january 06, 2025 (01:30pm)__ At Bac Conference Room Nbp Reservation Muntinlupa City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below, On Or Before __january 20, 2025 (01:30pm)_____. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On __january 20, 2025 (01:30pm)____ At The Bac Conference Room Nbp Reservation Muntinlupa City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Bureau Of Corrections Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Ma. Adoracion I. Viñas Office Of The Bac Secretariat Supply Office, Bureau Of Corrections, Muntinlupa City Tel # 02-8809-8587/02-8478-0907 Bacsec2022@gmail.com 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Bucor.gov.ph Date Of Issue: _______________ Ccsupt Celso S Bravo Chairperson, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Bureau Of Corrections Invites Bids For The Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf), With Project Identification Number__________________. [note: The Project Identification Number Is Assigned By The Procuring Entity Based On Its Own Coding Scheme And Is Not The Same As The Philgeps Reference Number, Which Is Generated After The Posting Of The Bid Opportunity On The Philgeps Website.] The Procurement Project Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) Is For The Construction Of Works, As Described In Section Vi (specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2025 In The Amount Of Three Hundred Million Pesos Only (₱300,000,000.00). 2.2. The Source Of Funding Is: Nga, The National Expenditure Program 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manual And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Invitation To Bid By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Inspected The Site, Determined The General Characteristics Of The Contracted Works And The Conditions For This Project, Such As The Location And The Nature Of The Work; (b) Climatic Conditions; (c) Transportation Facilities; (c) Nature And Condition Of The Terrain, Geological Conditions At The Site Communication Facilities, Requirements, Location And Availability Of Construction Aggregates And Other Materials, Labor, Water, Electric Power And Access Roads; And (d) Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices The Procuring Entity, As Well As The Bidders And Contractors, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. The Bidder Must Have An Experience Of Having Completed A Single Largest Completed Contract (slcc) That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc Adjusted, If Necessary, By The Bidder To Current Prices Using The Psa’s Cpi, Except Under Conditions Provided For In Section 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184. A Contract Is Considered To Be “similar” To The Contract To Be Bid If It Has The Major Categories Of Work Stated In The Bds. 5.3. For Foreign-funded Procurement, The Procuring Entity And The Foreign Government/foreign Or International Financing Institution May Agree On Another Track Record Requirement, As Specified In The Bidding Document Prepared For This Purpose. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.2 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Associated Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Fifty Percent (50%) Of The Project. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 7.1. [if Procuring Entity Has Determined That Subcontracting Is Allowed During The Bidding, State:] The Bidder Must Submit Together With Its Bid The Documentary Requirements Of The Subcontractor(s) Complying With The Eligibility Criteria Stated In Itb Clause 5 In Accordance With Section 23.4 Of The 2016 Revised Irr Of Ra No. 9184 Pursuant To Section 23.1 Thereof. 7.2. [if Subcontracting Is Allowed During The Contract Implementation Stage, State:] The Supplier May Identify Its Subcontractor During The Contract Implementation Stage. Subcontractors Identified During The Bidding May Be Changed During The Implementation Of This Contract. Subcontractors Must Submit The Documentary Requirements Under Section 23.1 Of The 2016 Revised Irr Of Ra No. 9184 And Comply With The Eligibility Criteria Specified In Itb Clause 5 To The Implementing Or End-user Unit. 7.3. Subcontracting Of Any Portion Of The Project Does Not Relieve The Contractor Of Any Liability Or Obligation Under The Contract. The Supplier Will Be Responsible For The Acts, Defaults, And Negligence Of Any Subcontractor, Its Agents, Servants, Or Workmen As Fully As If These Were The Contractor’s Own Acts, Defaults, Or Negligence, Or Those Of Its Agents, Servants, Or Workmen. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address At Bac Conference Room Nbp Reservation Muntinlupa City And/or Through Videoconferencing/webcasting} As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Ix. Checklist Of Technical And Financial Documents. 10.2. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 10.3. A Valid Pcab License Is Required, And In Case Of Joint Ventures, A Valid Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project. Any Additional Type Of Contractor License Or Permit Shall Be Indicated In The Bds. 10.4. A List Of Contractor’s Key Personnel (e.g., Project Manager, Project Engineers, Materials Engineers, And Foremen) Assigned To The Contract To Be Bid, With Their Complete Qualification And Experience Data Shall Be Provided. These Key Personnel Must Meet The Required Minimum Years Of Experience Set In The Bds. 10.5. A List Of Contractor’s Major Equipment Units, Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership, Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be, Must Meet The Minimum Requirements For The Contract Set In The Bds. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Ix. Checklist Of Technical And Financial Documents. 11.2. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.3. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Alternative Bids Bidders Shall Submit Offers That Comply With The Requirements Of The Bidding Documents, Including The Basic Technical Design As Indicated In The Drawings And Specifications. Unless There Is A Value Engineering Clause In The Bds, Alternative Bids Shall Not Be Accepted. 13. Bid Prices All Bid Prices For The Given Scope Of Work In The Project As Awarded Shall Be Considered As Fixed Prices, And Therefore Not Subject To Price Escalation During Contract Implementation, Except Under Extraordinary Circumstances As Determined By The Neda And Approved By The Gppb Pursuant To The Revised Guidelines For Contract Price Escalation Guidelines. 14. Bid And Payment Currencies 14.1. Bid Prices May Be Quoted In The Local Currency Or Tradable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 14.2. Payment Of The Contract Price Shall Be Made In: A. Philippine Pesos. 15. Bid Security 15.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 15.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Calendar Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 16. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission To The Given Website Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 17. Deadline For Submission Of Bids The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 18. Opening And Preliminary Examination Of Bids 18.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 18.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, All Bids And Combinations Of Bids As Indicated In The Bds Shall Be Received By The Same Deadline And Opened And Evaluated Simultaneously So As To Determine The Bid Or Combination Of Bids Offering The Lowest Calculated Cost To The Procuring Entity. Bid Security As Required By Itb Clause 16 Shall Be Submitted For Each Contract (lot) Separately. 19.3. In All Cases, The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184 Must Be Sufficient For The Total Of The Abcs For All The Lots Participated In By The Prospective Bidder. 20. Post Qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps), And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Bid Data Sheet Itb Clause 5.2 For This Purpose, Contracts Similar To The Project Refer To Contracts Which Have The Same Major Categories Of Work, Which Shall Be: Architectural, Engineering Design, Detailed Engineering Requirements And Construction Of Building With Concreting Works. 7.1 Subcontracting Is Not Allowed 10.3 A Valid Pcab License Is Required, And In Case Of Joint Ventures, A Valid Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project. 10.4 The Key Personnel Must Meet The Required Minimum Years Of Experience Set Below: For Design Personnel: Key Personnel General Experience Relevant Experience Principal Architect The Principal Architect Must Be Duly-licensed With At Least Ten (10) Years’ Experience Experience In The Design Of Residential, Government Offices Or Institutional Facilities, And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. Structural Engineer The Structural Engineer Must Be A Duly-licensed Civil Engineer With At Least Ten (10) Years’ Experience. Experience In Structural Design And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. Professional Electrical Engineer The Electrical Engineer Must Be A Registered Professional Electrical Engineer With At Least Five (5) Years’ Experience. Experience In The Design Of Lighting, Power Distribution, Communication Systems (specifically Structured And Local Area Network Cabling, Pabx), Building Management Systems And Preferably Knowledgeable In Developments In Emergent Efficient Lighting Technologies And Energy Management. Professional Mechanical Engineer The Mechanical Engineer Must Be A Professional Mechanical Engineer With At Least Five (5) Years’ Experience. Experience In Hvac And Fire Protection Systems And Preferably Knowledgeable In Emergent, Alternative Energy- Efficient Hvac Technologies. Electronics And Communications Engineer The Electronics And Communications Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience. Experience In The Design Of Communications Systems, And Preferably Knowledgeable In The Application Of Building Automation And Surveillance Systems. Sanitary Engineer The Sanitary Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience. Experience In The Design Of Building Water Supply And Distribution, Plumbing, And Preferably Knowledgeable In Waste Water Management/treatment, And Emergent, Alternative Effluent Collection And Treatment System. The Design & Build Contractor May, As Needed And At Its Own Expense, Add Additional Professionals And/or Support Personnel For The Optimal Performance Of All Architectural And Engineering Design Services, As Stipulated In These Terms Of Reference, For The Project. Prospective Bidders Shall Attach Each Individual’s Resume And Prc License Of The (professional) Staff. Design Personnel May Also Be Utilized For The Construction Phase Provided That The Same Meet The Minimum Number Of Years Of Experience In The Construction Of Similar Projects. For Construction Personnel: Key Personnel General Experience Relevant Experience Project Manager The Project Manager Shall Be A Licensed Architect Or Engineer With At Least Eight (8) Years Relevant Experience. Relevant Experience On Similar And Comparable Projects In Different Locations. The Project Manager Should Have A Proven Record Or Managerial Capability Through The Directing/managing Of Major Civil Engineering Works, Including Projects Of A Similar Magnitude. Project Architect/engineer The Project Architect/engineer Shall Be A Licensed Architect Or Engineer With At Least Five (5) Years’ Experience. Experience In Similar And Comparable Projects And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. Materials Engineer (m.e. I) The Materials Engineer Must Be Duly Accredited With The Dpwh And With At Least Five (5) Years’ Experience. Experience In Similar And Comparable Projects And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. Electrical Engineer The Electrical Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience. Experience In Similar And Comparable Projects In The Installation Of Lighting, Power Distribution, Communication Systems (specifically Structured And Local Area Network Cabling, Pabx), Building Management Systems. Mechanical Engineer The Mechanical Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience. Experience In Similar And Comparable Projects In The Installation Of Hvac And Fire Protection. Sanitary Engineer The Sanitary Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience. Experience In Similar And Comparable Projects In The Installation Of Building Water Supply And Distribution, Plumbing. Foreman The Foreman Must Have At Least Five (5) Years’ Experience. Experience In Similar And Comparable Projects And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. Safety Officer The Sanitary Officer Must Have At Least Two (2) Years’ Experience. Must Be An Accredited Safety Practitioner By The Department Of Labor And Employment (dole) And Must Have Undergone The Prescribed Forty (40) Hour Construction Safety And Health Training (cosh) 10.5 The Minimum Major Equipment Requirements Are The Following: Equipment Capacity Number Of Units Backhoe At Least 38hp With 0.055 To 0.160 M3 Bucket Capacity 1 Pay Loader At Least 2.5 To 9.5 M3 Bucket Capacity 1 Dump Truck At Least 10 Cu.m. 2 Generator 50kva 1 Concrete Mixers 1 Bagger 4 Welding Machines 300amp Heavy Duty 4 Submersible Dredging Pump At Least 1hp And 2” Output 1 Prospective Bidders Shall Attach The List Of Contractor’s Major Equipment Units, Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership, Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be. 12 No Further Instructions. 15.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than 2% Of The Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; B. The Amount Of Not Less Than 5% Of The Abc, If Bid Security Is In Surety Bond. 19.2 No Further Instructions. 20 Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its; 1. Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) 2. Supporting Documents For The Slcc (notice Of Award And/or Notice To Proceed And Project Owner’s Certificate Of Final Acceptance Issued By The Owner Other Than The Contractor Or The Constructors Performance Evaluation System (cpes) Final Rating, Which Must Be At Least Satisfactory. In Case Of Contracts With The Private Sector, An Equivalent Document Shall Be Submitted) 3. Certified True Copy Coming From The Issuing Agency Of Valid And Current Registration Certificate (sec Certificate Of Registration For Corporation Or Dti Certificate Of Registration For Sole Proprietorship Or Cda Certificate Of Registration For Cooperative) 4. Valid And Current Mayor’s Or Business Permit 5. Valid And Current Tax Clearance 6. Valid And Current Pcab License And Registration 7. Audited Financial Statement 8. Three (3) Sets Photocopy Of Eligibility And Financial Envelope Duly Marked As “copy No.1”, “copy No.2” And “copy No.3” 21 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. 2. Sectional Completion Of Works If Sectional Completion Is Specified In The Special Conditions Of Contract (scc), References In The Conditions Of Contract To The Works, The Completion Date, And The Intended Completion Date Shall Apply To Any Section Of The Works (other Than References To The Completion Date And Intended Completion Date For The Whole Of The Works). 3. Possession Of Site 3.1 The Procuring Entity Shall Give Possession Of All Or Parts Of The Site To The Contractor Based On The Schedule Of Delivery Indicated In The Scc, Which Corresponds To The Execution Of The Works. If The Contractor Suffers Delay Or Incurs Cost From Failure On The Part Of The Procuring Entity To Give Possession In Accordance With The Terms Of This Clause, The Procuring Entity’s Representative Shall Give The Contractor A Contract Time Extension And Certify Such Sum As Fair To Cover The Cost Incurred, Which Sum Shall Be Paid By Procuring Entity. 3.2 If Possession Of A Portion Is Not Given By The Above Date, The Procuring Entity Will Be Deemed To Have Delayed The Start Of The Relevant Activities. The Resulting Adjustments In Contract Time To Address Such Delay May Be Addressed Through Contract Extension Provided Under Annex “e” Of The 2016 Revised Irr Of Ra No. 9184. 4. The Contractor’s Obligations The Contractor Shall Employ The Key Personnel Named In The Schedule Of Key Personnel Indicating Their Designation, In Accordance With Itb Clause 10.3 And Specified In The Bds, To Carry Out The Supervision Of The Works. The Procuring Entity Will Approve Any Proposed Replacement Of Key Personnel Only If Their Relevant Qualifications And Abilities Are Equal To Or Better Than Those Of The Personnel Listed In The Schedule. 5. Performance Security 5.1. Within Ten (10) Calendar Days From Receipt Of The Notice Of Award From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr. 5.2. The Contractor, By Entering Into The Contract With The Procuring Entity, Acknowledges The Right Of The Procuring Entity To Institute Action Pursuant To Ra No. 3688 Against Any Subcontractor Be They An Individual, Firm, Partnership, Corporation, Or Association Supplying The Contractor With Labor, Materials And/or Equipment For The Performance Of This Contract. 6. Site Investigation Reports The Contractor, In Preparing The Bid, Shall Rely On Any Site Investigation Reports Referred To In The Scc Supplemented By Any Information Obtained By The Contractor. 7. Warranty 7.1. In Case The Contractor Fails To Undertake The Repair Works Under Section 62.2.2 Of The 2016 Revised Irr, The Procuring Entity Shall Forfeit Its Performance Security, Subject Its Property (ies) To Attachment Or Garnishment Proceedings, And Perpetually Disqualify It From Participating In Any Public Bidding. All Payables Of The Gop In His Favor Shall Be Offset To Recover The Costs. 7.2. The Warranty Against Structural Defects/failures, Except That Occasioned-on Force Majeure, Shall Cover The Period From The Date Of Issuance Of The Certificate Of Final Acceptance By The Procuring Entity. Specific Duration Of The Warranty Is Found In The Scc. 8. Liability Of The Contractor Subject To Additional Provisions, If Any, Set Forth In The Scc, The Contractor’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Contractor Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. 9. Termination For Other Causes Contract Termination Shall Be Initiated In Case It Is Determined Prima Facie By The Procuring Entity That The Contractor Has Engaged, Before, Or During The Implementation Of The Contract, In Unlawful Deeds And Behaviors Relative To Contract Acquisition And Implementation, Such As, But Not Limited To Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices As Stated In Itb Clause 4. 10. Dayworks Subject To The Guidelines On Variation Order In Annex “e” Of The 2016 Revised Irr Of Ra No. 9184, And If Applicable As Indicated In The Scc, The Dayworks Rates In The Contractor’s Bid Shall Be Used For Small Additional Amounts Of Work Only When The Procuring Entity’s Representative Has Given Written Instructions In Advance For Additional Work To Be Paid For In That Way. 11. Program Of Work 11.1. The Contractor Shall Submit To The Procuring Entity’s Representative For Approval The Said Program Of Work Showing The General Methods, Arrangements, Order, And Timing For All The Activities In The Works. The Submissions Of The Program Of Work Are Indicated In The Scc. 11.2. The Contractor Shall Submit To The Procuring Entity’s Representative For Approval An Updated Program Of Work At Intervals No Longer Than The Period Stated In The Scc. If The Contractor Does Not Submit An Updated Program Of Work Within This Period, The Procuring Entity’s Representative May Withhold The Amount Stated In The Scc From The Next Payment Certificate And Continue To Withhold This Amount Until The Next Payment After The Date On Which The Overdue Program Of Work Has Been Submitted. 12. Instructions, Inspections And Audits The Contractor Shall Permit The Gop Or The Procuring Entity To Inspect The Contractor’s Accounts And Records Relating To The Performance Of The Contractor And To Have Them Audited By Auditors Of The Gop Or The Procuring Entity, As May Be Required. 13. Advance Payment The Procuring Entity Shall, Upon A Written Request Of The Contractor Which Shall Be Submitted As A Contract Document, Make An Advance Payment To The Contractor In An Amount Not Exceeding Fifteen Percent (15%) Of The Total Contract Price, To Be Made In Lump Sum, Or At The Most Two Installments According To A Schedule Specified In The Scc, Subject To The Requirements In Annex “e” Of The 2016 Revised Irr Of Ra No. 9184. 14. Progress Payments The Contractor May Submit A Request For Payment For Work Accomplished. Such Requests For Payment Shall Be Verified And Certified By The Procuring Entity’s Representative/project Engineer. Except As Otherwise Stipulated In The Scc, Materials And Equipment Delivered On The Site But Not Completely Put In Place Shall Not Be Included For Payment. 15. Operating And Maintenance Manuals 15.1. If Required, The Contractor Will Provide “as Built” Drawings And/or Operating And Maintenance Manuals As Specified In The Scc. 15.2. If The Contractor Does Not Provide The Drawings And/or Manuals By The Dates Stated Above, Or They Do Not Receive The Procuring Entity’s Representative’s Approval, The Procuring Entity’s Representative May Withhold The Amount Stated In The Scc From Payments Due To The Contractor. Section V. Special Conditions Of Contract Special Conditions Of Contract Gcc Clause 2 Sectional Completion Is Not Applicable The Intended Completion Date Is Three Hundred Sixty-five (365) Calendar Days From The Date Of Receipt Of The Ntp. 4.1 The Procuring Entity Shall Give Possession Of All Parts Of The Site To The Contractor From The Date Of The Receipt Of Notice To Proceed (ntp). 6 No Further Instructions. 7.2 Fifteen (15) Years. 10 No Dayworks Are Applicable To The Contract. 11.1 The Contractor Shall Submit The Program Of Work To The Procuring Entity’s Representative Within Fourteen (14) Calendar Days After The Issuance Of The Notice To Proceed (ntp) 11.2 The Amount To Be Withheld For Late Submission Of An Updated Program Of Work Is One Tenth Of One Percent Of The Total Contract Price. 13 The Amount Of The Advance Payment Is Fifteen Percent (15%) Of The Contract Price Upon Submission To And Acceptance By The Bureau Of Corrections Of An Irrevocable Standby Letter Of Credit Of Equivalent Value From A Commercial Bank, A Bank Guarantee Or A Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Licensed By The Insurance Commission And Confirmed By The Bureau Of Corrections. 14 The Contractor May Submit A Request For Payment For Work Accomplished. Such Requests For Payment Shall Be Verified And Certified By The Procuring Entity’s Representative/project Engineer. Materials And Equipment Delivered On The Site But Not Completely Put In Place Shall Not Be Included For Payment. 15.1 The Date By Which “as Built” Drawings Are Required Is Upon Actual Completion Of The Project. 15.2 The Amount To Be Withheld For Failing To Produce “as Built” Drawings And/or Operating And Maintenance Manuals By The Date Required Is Equivalent To Five Percent (5%) Of The Contract Price. Section Vi. Specifications Terms Of Reference Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) Sablayan Prison And Penal Farm, Occidental Mindoro 1. Project Information 1.1 Project Description The Mission Of The Bucor Is To Protect Society By Confining Offenders In The Controlled Environments Of Prisons And Community-based Facilities That Are Safe, Humane, Cost-efficient, And Appropriately Secure, And That Provide Self-improvement Opportunities To Assist Offenders In Becoming Law-abiding Citizens. The Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) Shall Be Conducive To The Reformation And Rehabilitation Of Inmates That Will Bring Them Back Into The Mainstream Of Society As Useful Citizens Of The Country. The Contract Will Involve The Design And Build Scheme Leading To The Construction Of The Bureau Of Corrections Super Maximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm, Sablayan, Occidental Mindoro. The Plans And Designs Shall Be In Accordance With The Plan Of The Said Structures As Conceptualized By The Bucor Planning And Design Division Or As Conceptualized By The Winning Bidder If The Latter Is Found To Be Superior (as Defined In Section 3.1.1 Of This Tor). Contractors Shall Be Required To Conduct A Bucor Led Site Inspection And Evaluation To Enable The Contractors To Develop Their Proposals Accordingly. The Bureau Of Corrections Shall Not Assume Any Responsibility Regarding Erroneous Interpretations Out Of Any Data Presented By The Contractor. The Bucor Super Maximum Prison Facility (phase 2) Shall Be Constructed As Per Approved Drawings, Specifications, Bill Of Materials, Scope Of Works And The General Contract Conditions Following The Guidelines As Per Annex G Of Irr Of Ra 9184. This Project Aims To Be Completed Within A Year, Aligning With Our Decongestion Program. This Expedited Timeline Underscores Our Commitment To Addressing Urgent Needs Within The Correctional System And Providing Timely Solutions For The High Risk Committed Pdl. The Plans And Designs Shall Be In Accordance With The Plan Of The Said Structures As Conceptualized By The Planning And Design Division (pdd) Under. Contractors Shall Be Required To Conduct A Bucor Led Site Inspection And Evaluation To Enable The Contractors To Develop Their Proposals Accordingly. The Bucor Shall Not Assume Any Responsibility Regarding Erroneous Interpretations Out Of Any Data Presented By The Contractor. The Construction Of Super Maximum-security Facility Shall Be Constructed As Per Approved Drawings, Specifications, Bill Of Materials, Scope Of Works And The General Contract Conditions Following The Guidelines As Per Annex G Of Irr Of Ra 9184. The Project Shall Have The Following Basic Components: A. Complete Detailed Architectural And Engineering Design Plans, Technical Specifications, And Design Calculations For The Construction Of The Project. Such Plans, Designs, And Technical Specifications Shall Be Subject For Review And Approval By The Bucor Pdd. The Design Development And The Contract Documents Phases Of The Design Shall Continue After The Bid Is Awarded. It Shall Likewise Be Subject For Review And Approval By The Director Of Directorate For Engineering Services (des). B. The Bid Shall Be Based On The Conceptual/schematic Design Drawings Prepared By The Bucor Pdd Or That Submitted By The Winning Bidder As Defined In Section 3.1.1 Of This Tor. C. The Contractor Shall Complete The Construction Of The Following Facility Component: I. One (1) Unit 2-storey“type B” Pdl Dormitory At Least 3190 Sq.m (gross Area) Polished Flooring And Sandwich Panel Roofing With The Capacity Of Atleast 340 Pdl, 2 Pdl Per Cell With Double Deck Bunk Bed (160 Cells), 1 Pdl Per Cell With Single Bed (20 Cells). The Dormitory To Include Complete Utilities, Power Supply, Cctv, Water Supply, Fire Protection; • Electrical System: Three-phase Power Line Supply, Connected From The Local Electric Utility (from Main Road/ Source To The Compound. The Power Line Shall Be Used For The Future Development Of The 50 Ha Facility. • Electrical System: Backup Power (three-phase Genset) Supply System With Capacity Not Less Than Total Computed Mva Load, Without Demand Factor (designed To Supply The Dormitory), And To Include Capacitor Bank, If Necessary; • Sewerage And Drainage Systems(pipelines To Cover From Project Site To Nearest Tapping Point); • Water Supply System With Sufficient Pressure To Provide The Water Requirement Of The Psdl. The System Is Oncomposed Of A Cistern Tank, Pumps, And An Overhead Water Storage Tank. Deep Well Source Water System (intake Box, Transmission Pipelines, Pressure Break Tanks, Chlorinator With Tanks And Accessories, Etc.) Whichever Is Deemed Most Suitable For The Facility And Is Authorized By The Lgu. • Fire Protection System (fire & Jockey Pump, Pump House), Fire Detection Alarm System And Fire Suppression Equipment Included In Dormitory. • Cctv Systems: To Install Cctv At Perimeter Fence To Monitor The Inside Compound And Dormitory To Monitor The Hallways And Blind Spots. Ii. 3 Meters Height Concrete Perimeter Security Fence With Concertina Above, To Cover 50 Hectares Area (plastered And Painted Finish); Iii. Primary And Secondary Fence For 1.8 Hectares Compound Including Gates, Catwalk And Post Towers (with Cr And Water Supply) (r.a. 10575 Rule 7). • 4 Meters Height Concrete Primary Perimeter Fence (with Catwalks, Concertina Wirings, Post Tower (with Cr And Water Supply) And Solar Lightings, (ra10575). • Secondary Perimeter Fence (3 Layer Concertina, Steel Mesh) With 300w Integrated Solar Light Every 3 Bays And (to Include Post Towers And Gates); Iv. Road Networks And Culverts • All Entry And Exit Point Of Any Bodies Of Water E.g. Creeks, Canals Shall Be Fenced Culvert By Metal Grills (non-corrosive); • The Project Has An Allocated Budget Sufficient To Cover At Least 1440 Sqm Of Road Construction Within The Prison Facility. While This Budget Allows For Road Development, Prioritization Shall Be Given To The Construction Of Culverts, Both Fenced And Road Culverts, To Ensure Adequate Drainage And Prevent Flooding. These Culverts Are Critical For The Road Leading From The Main Road To The Site, As Well As Along The Perimeter Of The Facility. To Accurately Assess The Project Scope And Design, Bidders Are Required To Conduct A Thorough Site Inspection To Identify And Evaluate All Necessary Culverts." 1.2 Contractual Framework The Contractual Arrangement To Be Used For The Project Is The Design-and-build (db) Scheme. Under This Scheme The Procuring Entity Awards A Single Contract For The Architectural/engineering Design And Construction To A Single Firm, Partnership, Corporation, Joint Venture Or Consortium. The Winning Contractor Shall Consult And Collaborate With The Bucor Pdd For The Preparation Of The Detailed Architectural Design Of The Project. The Detailed Architectural And Engineering Design Shall Be Subject For The Review And Approval By The Bucor Pdd. Contractors Shall Be Required To Conduct A Bucor Led Site Inspection And Evaluation To Enable The Contractors To Develop Their Proposals Accordingly. The Bucor Shall Not Assume Any Responsibility Regarding Erroneous Interpretations Out Of Any Data Presented By The Contractor. The Obligations And Liabilities Of The Contractor And Its Architect Shall Be Joint And Solidary For Purposes Of The Detailed Architectural Design Of The Project In Accordance With Article 1723 Of The Civil Code Of The Philippines And Other Pertinent Laws. The Db Scheme Of Procurement Was Recommended, Endorsed, And Adopted Pursuant To The Annex G Of Irr Of Ra 9184. 2. Scope Of Contract 2.1 Obligations Of The Winning Bidder/contractor A. Render Architectural And Allied Engineering Design Services Including Final Schematic Design Necessary For The Implementation Of The Project. The Allied Engineering Design Services Shall Include, But Shall Not Be Limited To, Design For Architectural, Civil, Structural, Electrical, Mechanical, Plumbing, And Electromechanical. All Drawings Shall Be Generated Using Modern Modeling/drafting Software And Printed On High Quality 20” X 30” Blue Print Paper. B. Undertake Detailed Architectural And Engineering Designs (daeds) Using The Given Data Such As Topographic, Hydrographic And Cross–section Surveys, Geotechnical And Geological Investigation, And Hydrologic Investigation And Initial Schematic Design Or Design Concept Provided By The Bucor Pdd Which Conforms With The Minimum Performance Specifications And Standards (mpss); C. If Applicable, Secure Environmental Clearance Or An “environmental Compliance Certificate (ecc)”. If The Proposed Project Is Considered Outside The Purview Of The Philippine Environmental Impact Statement (eis) System, A Certificate Of Non- Coverage Or Certificate Of Exemption Shall Be Secured. D. The Project Shall Be Constructed According To The Daeds Prepared By The Winning Bidder And Approved By The Bucor And In Compliance With The Mpss As Well As Provided In Rule Vii, Section 7 Of The Irr Of Ra 10575. Likewise, Construction Includes Conformance To The Provisions Pertaining To Buildings Under The Latest Edition Of The Dpwh Standard Specifications For Public Works Structures, Volumes Ii And Iii (blue Book). The Blue Book Prescribes, Among Other Things, The Material Requirements And Construction Requirements For Different Items Of Work, Including The Tests To Be Conducted During Construction By The Dpwh-accredited Testing Laboratory. The Blue Book Incorporates Pertinent Provisions Of The American Society For Testing And Materials (astm) And American Concrete Institute (aci), Among Other Standards, Pertaining To Construction. Attention Shall Be Given To The Relevant Items Of Work In The Following Parts Of The Blue Book: Volume Ii ➢ Part A – Facilities For The Engineer ➢ Part B – Other General Requirements Volume Iii ➢ Part A – Earthwork ➢ Part B – Plain And Reinforced Concrete Works ➢ Part C – Finishing ➢ Part D – Electrical ➢ Part E – Mechanical ➢ Part I – Water Supply ➢ Part J – Flood Control And Drainage ➢ Part I-c – Drainage Works For Materials And Technologies Not Covered By The Blue Book, Or If The Proponent Intends To Use Any New Material/technology Which Is Not Accredited By The Dpwh Bureau Of Research And Standards (brs), The Proponent Shall Submit A Certification From A Recognized Foreign Or International Institution To The Effect That The New Materials Or Technology Meets The Mpss For This Project And Has Been Successfully Used In Existing Structures With Proven Integrity. The Winning Bidder Or Contractor Shall Be Held Liable For Design And Structural Defects And/or Failure Of The Completed Project Within The Warranty Period Specified In Section 62.2 Of The Irr Of Ra 9184; And, F. The Winning Bidder Or Contractor Shall Be Solely Responsible For The Design And Shall Be Held Responsible For Any Default Resulted From Improper Design. Further, Extended Liability Of The Contractor Since It Stipulated That The Works, When Completed, Shall Be Fit For The Purpose For Which It Was Intended As Defined In The Contract. 2.2 Obligations Of The Bucor A. Provide Full Information On All Requirements For The Project; B. Approve The Winning Bidder Or Contractor’s Design Without Diminishing Their Full And Sole Responsibility For The Quality And Integrity Thereof; C. Give Prompt Written Notice Thereof To Winning Bidder Or Contractor, If It Observes Or Becomes Aware Of Any Defect In The Project; D. Designate, When Necessary, Representatives Authorized To Act On Its Behalf. It Shall Examine Documents Submitted By The Winning Bidder Or Contractor And Render Decisions Pertaining Thereto Promptly, To Avoid Unreasonable Delay In The Progress Of Their Work. It Shall Observe The Procedure Of Issuing Orders To The Winning Bidder Or Contractor; E. Supervise And Monitor The Implementation Of The Project; I. Construction Monitoring And Testing Forms: • The Use Of Construction Monitoring And Testing Forms That Will Be Provide By The Bucor - Nhq Pdd Is Mandatory Throughout The Duration Of Construction. • Oversight Of These Forms Will Be Conducted By The Engineering Services (es) Of The Sppf On Behalf Of The Bucor Pdd • Sppf-es To Impose To Contractor Testing Of All Items After Installation And/or Application. Es To Send Pdd Copy Of The Test Report/s. • Sppf-es To Monitor Material Delivery Of Contractor To Ensure All Materials Installed And/or Applied Are In Accordance With The Specifications Stated On Plans And Contract Of This Project. • In Case There Would Be Substitute Or Alternative To The Original Specification Of Material/s, Sppf- Es To Inform Pdd Of Such Variation. Ii. Bucor Engineer Visits: • Nhq Engineers And Architects (personnel Of Pdd) Will Conduct Site Visits On A Quarterly Basis Or Whenever Deemed Necessary To Ensure Compliance With Standards And Regulations. • Pdd Personnel To Witness The Final Testing And Commissioning Of The Systems, Equipment And Utilities Prior To Acceptance Of The Project Or Part Of The Project Thereof. Iii. Progress Billing Payment: • Sppf Es Engineers Will Provide Monthly Updates, Or As Deemed Necessary, On The Statement Of Work Accomplishment Based On The Actual Progress Of The Project, Including Reports Update. F. Pay The Accomplishment Accepted In The Conformance With The Mpss Included Under The Design And Build Contract. I. This Reports And Swa Updates Of The Ippf Es Will Be Reviewed And Approved By Pdd - Nhq Prior To Any Progress Billing Payments Being Made. 2.3 Bidding Documents The Bidding Documents For The Project Shall Govern The Conduct Of The Procurement Of The Project. 3. Scope Of Works 3.1 Planning And Design Phase 3.1.1 Preliminary Architectural Plan (pap) By Bidder The Approved Concept Design Shall Adopt The Provisions Indicated In Rule Vii, Section 7 Of The Irr Of Ra 10575. Bidders Shall Submit Also An Alternative Design Concept With Respect To The Actual Site Condition. This Alternative Design By The Winning Bidder Shall Be Adopted Should The Same Be Found To Be Superior Than The One Conceptualized By The Bucor Pdd. 3.1.2 Detailed Architectural And Engineering Design (daed) By The Winning Bidder During The Implementation Of The Project, The Winning Bidder Shall Prepare The Daed Of The Project And Submit The Same To The Bucor For Approval Prior To The Execution Of The Construction Works. The Winning Bidder Shall Prepare The Daed Based On Its Pap As Reviewed And Accepted By The Bucor Pdd And In Accordance With The Minimum Performance Standards And Specifications (mpss). The Daed Shall Be Undertaken With A Degree Of Accuracy That Will Allow Estimates To Be Made Within Approximately Plus Or Minus Five Percent (+/-5%) Of The Final Quantities. Once Approved By The Bucor, The Winning Bidder’s Daed Shall Form Part Of The Mpss. The Bucor-approved Daed, Together With The Mpss Provisions On Construction Under Section 2.0 Hereof, Shall Govern The Actual Construction Undertaken By The Winning Bidder. The Winning Bidder Shall Undertake The Necessary Field Surveys And Investigation In Accordance With The Dpwh Design Guidelines. In Carrying Out These Works, The Winning Bidder Shall Ensure That The Engineering, Environmental, Particularly During Field Investigations And The Development Of The Preliminary And Final Detailed Engineering Designs. The Winning Bidder Shall Ensure That All Designs Submitted For Approval Have Fully Taken Into Account Key Findings From The Engineering, Environmental, And That Negative Environmental Impacts Have Been Minimized Or Eliminated To The Fullest Extent Possible. 3.1.3 Architectural And Engineering Design Submittals I. Architectural Design A. The Building Should Be Designed With Structural, Electrical, Natural Or Combine Ventilation And Natural Lighting Following Building Design Standards. B. The Prospective Bidder Shall Prepare The Preliminary Architectural Plans In Accordance With The Requirements Of The National Building Code Of The Philippines, Accessibility Law (bp 344) Including All Other Applicable Laws And Local Ordinances. Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. Site Development Plan 2. Vicinity Map 3. Perspective 4. Floor Plans 5. Elevations A. Front Elevation B. Rear Elevation C. Right Elevation D. Left Elevation 6. Sections A. Longitudinal Section B. Cross Section 7. Doors & Window Schedule 8. Plans And Details Of Stairs And Ramps 9. Schedule Of Finishes For Floors, Walls And Ceiling 10. Miscellaneous Details Ii. Structural Design A. The Proponent Shall Prepare The Necessary Structural Analysis/calculation And Design Of The Structural Members Of The Building Component In Accordance With The National Building Code Of The Philippines With Its Referral Codes Such As The Latest National Structural Code Of The Philippines. The Design For The Structure Shall Take Into Account, Among Other Things, The Seismic Requirements Of The Area To Determine The Optimum Safety Of The Whole Structure And To Minimize Possible Earthquake Damage. B. On The Basis Of The Data Obtained From The Detailed Site Investigations, Topographical/soil And Survey, Geotechnical Engineering, Foundation Investigation, Material Testing, Survey Of Existing Site Conditions, The Seismic Requirements Of The Area, The Load Requirements Of The Building And Other Investigation Required To Obtain The Data Necessary To Ensure The Safety Of The Structure, The Proposal Shall Prepare The Preliminary Structural Design Plans Of The Structure. Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. Structural Design Criteria And Design Notes 2. Foundation Plan 3. Floor Framing Plans 4. Schedule Of Slab, Beams And Girders 5. Schedule Of Columns 6. Schedule Of Footings 7. Structural Details Of Stairs/ramp, If Applicable 8. Roof Framing Plan, If Applicable 9. Schedule And Details Of Trusses, If Applicable 10. Road Design And Details (if Applicable) 11. Miscellaneous Details Iii. Sanitary/plumbing Design A. General • The Detailed Design Shall Conform To The General Standards Adopted By The Sanitary & Plumbing Code Of The Philippines And Other Pertinent Laws And Ordinances. • All Design Considerations/assumptions Shall Be Based On The Results Of The Technical Studies, Detailed Analyses, And Design Computations. • The Technical Drawings And Specifications Shall Clearly Indicate All The Details Required To Ascertain The Care And Thoroughness Devoted In The Preparation Of The Drawings. B. Drainage And Sewerage • The Drainage Layout Shall Show All The Required Information Such As Direction Of Flow, Manhole-to-manhole Distances, And Sizes Of Lines, Manholes/canals, Location Of Outfalls, Etc. • The Prospective Bidder Shall Prepare A Design For The Sewage Treatment Plant In Accordance To The Clean Water Act Of 2004 (republic Act No. 9275) And Other Relevant Laws And Ordinances. Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. General Notes 2. Legend & Symbols 3. Sewer, Vent And Storm Drainage Layout 4. Enlarged Toilet Plan For Common And Pwd Toilets 5. Isometric Diagram 6. Miscellaneous Details 7. Drainage And Sewerage System 8. Three Chamber Septic Tank Plans And Details C. Water Supply And Distribution System • The Proponent Shall Carry Out A Preliminary Detailed Design For The Water Supply Of The Project. The Design Should Be On The Basis Of The Source And Volume Of Water Supply, Water Consumption, Piping Network, And Conveyance In Accordance With The Applicable Laws, Rules And Regulations Governing Health, Safety And Sanitation. • The Contractor Shall Install Elevated Water Storage/s Per Unit Located At The Roof Deck Of The Prison Dormitories. (sufficient Capacity To Supply The Pdl) Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. General Notes 2. Legend & Symbols 3. Water Line Layout 4. Water Line Isometric Diagram 5. Water Reservoir Plans And Details 6. Miscellaneous Details Iv. Electromechanical Design A. Sewage Treatment Plant • The Prospective Bidder Shall Prepare A Design For The Sewage Treatment Plant In Accordance To The Clean Water Act Of 2004 (republic Act No. 9275) And Other Relevant Laws And Ordinances. Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. General Notes 2. Legend & Symbols 3. Electrical System Layout 4. Mechanical System Layout 5. Instrumentation And Control System Diagrams 6. Piping And Instrumentation Diagrams (p&ids) 7. Equipment Details And Specifications 8. Electrical Power Distribution 9. Emergency Power Systems 10. Grounding And Lightning Protection 11. Control And Monitoring Systems, If Applicable 12. Safety Systems 13. Miscellaneous Details B. Fire Protection System • The Prospective Bidder Shall Prepare A Design For The Fire Protection System In Accordance To The Fire Code Of The Philippines, (irr) Of Ra 9514, And Other Relevant Laws And Ordinances. Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. Sprinkler System 2. Sprinkler System Isometric Diagram 3. Fire Fighting Piping System Diagram 4. Fire Alarm System Layout 5. Fire Suppression System Layout 6. Smoke Management System Layout 7. Fire Pump And Water Supply 8. Miscellaneous Details V. Electrical Design A. The Prospective Bidder Shall Prepare A Preliminary Design Plan For The Electrical And Power Supply System Of The Building In Accordance With The Electrical Code Of The Philippines, Fire Code Of The Philippines, National Building Code Of The Philippines And Other Relevant Laws And Ordinances. B. The Prospective Bidder Shall Prepare A Design For The Electrical And Power Supply System Considering Ease Of Maintenance And Prevention Of Illegal Connections Including Electrical Supply For Ceiling Fans. C. The Prospective Bidder Shall Prepare A Design For Backup Power Generator With Capacity Not Less Than Total Computed Kva Load Without Demand Factor. D. 3-phase Electrical Supply Shall Be Sourced From The Local Electrical Utility. E. Power Line Connection From Main Source To The Facility Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. Power Riser Diagram 2. Power Layout System 3. Lighting Layout System 4. Local Area Network System, If Applicable 5. Grounding System 6. Load Schedules 7. Others As Applicable Vi. Other Requirements  Technical Specifications  Boring Test  Structural Design And Analysis And Computation  Final Design And Construction Plans  Upon Award Of Contract, The Contractor Shall Comply The Following: O Prepare Final Draft Of Architectural And Engineering Design Plans Incorporating All Design Refinements And Revisions Based On Project Requirement Or As May Be Required By The Bucor Pdd Within The Scope Of Design. O Submit To The Bucor Design And Build Committee (bucor-dbc) The Final Architectural And Engineering Design Plans And Specifications Duly Signed And Sealed By The Concerned Professional Architect, Engineers, Incorporating All The Necessary Revisions And Refinements For Approval By The Head Of Procuring Entity. 3.2 Construction Phase The Following Works Shall Comprise This Phase: I. Permits And Clearances, The Contractor Shall Upon Authorization Of The Head Of The Procuring Entity (hope), Make Representations With The Government Agencies Concerned To Expedite The Processing Of The Necessary Permits And Certificates Such As The Following: A. Zoning Certification And Locational Clearance B. Building /electrical/sanitary Permits C. Certificate Of Occupancy D. Environmental Clearance Certificate E. All Other Permits/clearances As May Be Required For The Construction. Ii. Mobilization, The Contractor Shall Mobilize All The Required Project Team Personnel, Equipment, Tools, And Manpower With The Required Skills And In Sufficient Number As May Be Necessary For His Efficient Undertaking Of The Project. Iii. Clearing, Grubbing And Hauling/disposal Of Debris Iv. Construction Stage As A Rule, Contract Implementation Guidelines For Procurement Of Infrastructure Projects Shall Comply With Annex “e” Of The Revised Irr Of Ra 9184. The Following Provisions Shall Supplement These Procedures: I. No Works Shall Commence Unless The Contractor Has Submitted The Prescribed Documentary Requirements And Implementing Unit Has Given Written Approval. Work Execution Shall Be In Accordance With Reviewed And Approved Documents. Ii. The Contractor Shall Be Responsible For Obtaining All Necessary Information As To Risks, Contingencies And Other Circumstances Which May Affect The Works And Shall Prepare And Submit All Necessary Documents Specified By The Implementing Unit To Meet All Regulatory Approvals As Specified In The Contract Documents. Iii. The Contractor Shall Submit A Detailed Program Of Works Within Fourteen (14) Calendar Days After The Issuance Of The Notice To Proceed (ntp) For Approval By The Head Of The Procuring Entity (hope) That Shall Include, Among Others: A. The Order In Which It Tends To Carry Out The Work Including Anticipated Timing For Each Stage Or Design/detailed Engineering And Construction; B. Periods For Review Of Specific Outputs And Any Other Submissions And Approvals; C. Sequence Of Timing For Inspection And Tests; D. General Description Of The Design And Construction Methods To Be Adopted; E. Number Of Personnel To Be Assigned For Each Stage Of The Work; F. List Of Equipment Required On Site For Each Stage Of The Work; And G. Description Of The Quality Control System To Be Utilized For The Project. Iv. Any Errors, Omissions, Inconsistencies, Inadequate Or Failure Submitted By The Contractor That Do Not Comply With The Requirements Shall Be Rectified, Resubmitted And Reviewed At The Contractor’s Cost. If The Contractor Wishes To Modify Any Design Or Document Which Has Been Previously Submitted, Reviewed And Approved, The Contractor Shall Notify The Implementing Unit Within A Reasonable Period Of Time And Shall Shoulder The Cost Of Such Changes. V. As A Rule, Changes In Design And Construction Requirements Shall Be Limited Only To Those That Have Not Been Anticipated In The Contract Signing And Approval. The Following Guidelines Shall Govern Approval For Change Or Variation Order: A. Change Orders Resulting From Design Errors, Omissions Or Non-conformance With The Performance Specifications And Parameters And The Contract Documents By The Contractor Shall Be Implemented By The Contractor At No Additional Cost To The Bureau Of Corrections. B. Provided That The Contractor Suffers Delay And/or Incurs Costs Due To Changes Or Errors In The Preparation Of Performance Specification And Parameters, The Contractor Shall Be Entitled To Either One Of The Following:  An Extension Of Time For Any Such Delays Under Section 10 Of Annex “e” Of Irr-a (ra9184; Or  Payments For Such Cost As Specified In The Contract Documents, Provided That The Cumulative Amount Of The Variation Order Does Not Exceed Ten Percent (10%) Of The Original Project Cost. C. The Contract Documents Shall Include The Manner And Schedule Of Payment Specifying The Estimated Contract Amount And Installments In Which The Contract Will Be Paid. D. The Contractor Shall Be Entitled To Advance Payment Subject To The Provisions Of Section 4 Of Annex “e” Of The Revised Irr Of Ra 9184. E. The Implementing Unit Shall Monitor The Quality Control Procedures For The Design And Construction In Accordance With The Government Guidelines And Shall Issue The Proper Certificates Of Acceptance For Sections Of The Works Or Whole Of The Works As Provided For In The Contract Documents. F. The Contractor Shall Provide All Necessary Equipment, Personnel, Instruments, Documents And Others To Carry Out Specified Tests. G. This Design And Build Project Shall Have Minimum Defects Liability Period Of One (1) Year Contract Completion Or As Provided In The Contract Documents. This Is Without Prejudice To The Liabilities Imposed Upon The Engineer/architect Who Drew Up The Plans And Specification For A Building Sanctioned Under Section 1723 Of The New Civil Code Of The Philippines. H. The Contractor Shall Be Held Liable For Design And Structural Defects And/or Failure Of The Completed Project Within The Warranty Period Of 15 Years For Permanent Structures/buildings And 5 Years For Roads As Specified In Section 62.2.2 Of The Revised Irr Of Ra 9184 V. As-built Plans. The Contractor Shall Cause The Preparation And Submission Of As-built Plans Duly Signed And Sealed By All Concerned Parties Involved In The Construction In The Same Sheet Size And Scale As The Original Drawings In One (1) Blue Print Copy And One (1) Reproducible Copy. Vi. General Requirements: 1. Temporary Facilities Such As Field Offices For The Bucor Inspectorate Team, Project Engineers And Quarters For Laborers; Temporary Warehouse For The Construction Material. 2. Office Furniture And Equipment, Survey Equipment And Consumables 3. Photographs: This Item Consists Of The Supply Of Equipment And Materials, I.e., Album, Necessary To Undertake Photographic Progress Activities Of The Project And Of All Cost Incidental To The Preparation And Submission Of Photographs (at Least 12 Photographs Per Day). The Quantities For Photographs Shall Be One (1) Set Of Photographs Per Month. 4. Health And Safety Program Including Personal Protective Equipment (ppe) A. All Standard Safety Measures And Precautions Shall Be Exercised By The Contractor In The Course Of The Project For The Protection Of The Public And Its Workers And In Conformity With Dole Department Order No. 13, Series Of 1998. B. All Workers Shall Be Equipped With Proper Working Uniform And Identification At All Times. They Must Be Registered With The Governing Bucor Security Office And Must Comply With The Bucor’s Rules And Regulations. C. The Contractor Shall Secure His/her Own Equipment And Materials On Site. The Bucor Shall Not Be Liable To Any Losses Incurred During The Progress Of The Work. 5. Minimum Heavy Equipment Requirement (as Needed) For Site Development Such As: No. Item Specification 1. Backhoe 0.8 Cu. M. 2. Backhoe Wheel Mounted With Breaker 0.90 Cu. M. 3. Cargo/service Truck 2-5 Mt., 160 Hp 4. Dump Truck 12 Cu. Yd. 5. Motorized Road Grader G710a, 140hp 6. Payloader 1.5 Cu. M. 7. Vibrator Roller 10 Mt 8. Bulldozer 170 Hp 9. Scraper 515 Hp 10. Truck Mounted Crane, Hydraulic Telescopic Bommer Capacity: 41 – 45 Mt. 11. Crawler Crane 41-45 Mt 12. Generator Set 300 Kw/375 Kva 13. Water Pump 100mm Suction Dia. 14. One Bagger Mixer 4-6 Ft3/min 15. Concrete Vibrator Ey20, 5hp, 32-70mm 16. Vibro Hammer 45000 Kg-m 17. Excavator 17.5 Kw Or Any Specify Types Of Heavy Equipment Needed For A Site Development Will Be Determined By The Winning Bidder. 6. Environmental Compliance 7. Communication Equipment: This Item Consists Of The Provision Of Communication Equipment. 8. Billboard 9. Traffic Management (if Applicable). Vii. Building Construction 1 Lot One (1) Unit 2-storey“type B” Pdl Dormitory At Least 3190 Sq.m (gross Area) Polished Flooring And Sandwich Panel Roofing With The Capacity Of Atleast 340 Pdl, 2 Pdl Per Cell With Double Deck Bunk Bed (160 Cells), 1 Pdl Per Cell With Single Bed (20 Cells). The Dormitory To Include Complete Utilities, Power Supply, Cctv, Water Supply, Fire Protection; • Electrical System: Three-phase Power Line Supply, Connected From The Local Electric Utility (from Main Road/ Source To The Compound. The Power Line Shall Be Used For The Future Development Of The 50 Ha Facility. • Electrical System: Backup Power (three-phase Genset) Supply System With Capacity Not Less Than Total Computed Mva Load, Without Demand Factor (designed To Supply The Dormitory), And To Include Capacitor Bank, If Necessary; • Sewerage And Drainage Systems(pipelines To Cover From Project Site To Nearest Tapping Point); • Water Supply System With Sufficient Pressure To Provide The Water Requirement Of The Psdl. The System Is Composed Of A Cistern Tank, Pumps, And An Overhead Water Storage Tank. Deep Well Source Water System (intake Box, Transmission Pipelines, Pressure Break Tanks, Chlorinator With Tanks And Accessories, Etc.) Whichever Is Deemed Most Suitable For The Facility And Is Authorized By The Lgu. • Fire Protection System (fire & Jockey Pump, Pump House), Fire Detection Alarm System And Fire Suppression Equipment Included In Dormitory. • Cctv Systems: To Install Cctv At Perimeter Fence To Monitor The Inside Compound And Dormitory To Monitor The Hallways And Blind Spots. 1 Lot 3 Meters Height Concrete Perimeter Security Fence With Concertina Above, To Cover 50 Hectares Area (plastered And Painted Finish); 1 Lot Primary And Secondary Fence For 1.8 Hectares Compound Including Gates, Catwalk And Post Towers (with Cr And Water Supply) (r.a. 10575 Rule 7). • 4 Meters Height Concrete Primary Perimeter Fence (with Catwalks, Concertina Wirings, Post Tower (with Cr And Water Supply) And Solar Lightings, (ra10575). • Secondary Perimeter Fence (3 Layer Concertina, Steel Mesh) With 300w Integrated Solar Light Every 3 Bays And (to Include Post Towers And Gates); 1 Lot Road Networks And Culverts • The Project Has An Allocated Budget Sufficient To Cover At Least 1440 Sqm Of Road Construction Within The Prison Facility. While This Budget Allows For Road Development, Prioritization Shall Be Given To The Construction Of Culverts, Both Fenced And Road Culverts, To Ensure Adequate Drainage And Prevent Flooding. These Culverts Are Critical For The Road Leading From The Main Road To The Site, As Well As Along The Perimeter Of The Facility. • All Entry And Exit Point Of Any Bodies Of Water E.g. Creeks, Canals Shall Be Fenced Culvert By Metal Grills (non-corrosive); • To Accurately Assess The Project Scope And Design, Bidders Are Required To Conduct A Thorough Site Inspection To Identify And Evaluate All Necessary Culverts. A. Material Specifications: A. Floor Finishes • Polished Cement Finish Prison Cell, Hallways, Staircases, And Rooms • Plain Cement Finished - Pathways. • Ramps - Anti Slip Pavers Or Tiles • Crs – Unglazed Ceramic Tiles B. Wall Finishes A. Glazed Wall Tiles - 1.8m Height. B. Plain Cement Plaster Finish - For All Buildings And Facilities C. Ceiling Finishes C. Concrete Steel Decking, If Applicable. – Coated In White Enamel D. Painting D. Semi-gloss Solvent Paint Top Coat (high-end Quality) For Interior And Exterior Walls In Two To Three Coats Application. Apply Concrete Neutralizer For Newly Finished Concrete Surfaces. Use Solvent Primer. E. Varnish Paint Finish With Weather Proof Coating – For Doors And Jambs Branded, High-end Quality (offices, Etc.), All Wooden Doors Must Have Secondary Steel Doors. F. Use Epoxy Paint Primer. Epoxy Paint Finish – For Structural Steel And All Metal Works E. Doors And Windows G. No Doors For Prison Facility Comfort Rooms With 1.20 Meter Finish Wall Height (see Rule Vii, Section 7 R-irr Of Ra 10575). H. Steel Doors And Grills – For Dormitories, Gates And Other Security Areas. Sliding Doors For All Cells (see Rule Vii, Section 7 R-irr Of Ra 10575) F. Waterproofing I. Uv Resistant Polyurethane Waterproofing – For All Roof Deck With Topping Works Provided With Welded Wire Mesh. (at Elevated Water Tank Area) J. Cistern - Polyurethane Waterproofing G. Plumbing Works K. Upvc Pipe Series 1000 – For All Soil, Sewer, Waste, Dry And Wet Vent Piping High-end Quality L. Pprc Fusion Type – For All Water Lines High-end Quality M. Contractor Encouraged To Adapt: Lpf Flush Valve For Water Closet Or Stainless Toilet-lavatory Combination. Waterless Urinals N. Sprinkler System To All Prison Dormitories In Accordance With The Provisions Of Revised Plumbing Code Of The Philippines. O. Contractor To Provide A Water System To Supply The Facility 4. Approved Budget For The Contract (abc) The Approved Budget For The Contract (abc) Is Php 300,000,000. This Is The Ceiling For Acceptable Bids. Bids Higher Than Abc Shall Be Automatically Rejected. 5. Proposed Implementation Schedule (example): No. Of Months 1 2 4 5 6 7 8 9 10 11 12 Design Phase Construction Phase 6. Eligibility Criteria For Bidders 6.1 General The Eligibility Requirements For This Design And Build Project Shall Adopt The Provisions Of Annex “g” Of The Implementing Rules And Regulations Of Ra 9184 (e.g. Eligibility Requirement). However, If A Bidder Who Has No Experience In Db Project On Its Own May Opt To Enter A Subcontracting Agreement, Partnership, Or Joint Venture With A Design Or Engineering Firm For The Design Portion Of The Project. 6.2 Legal Requirements A. Valid Contractor’s License Issued By The Philippine Contractor’s Accreditation Board B. Valid License Of The Contractor’s Designer Issued By The Professional Regulation Commission. 6.3 Technical Requirements A. The Contractor’s Designer Must Have Designed One Structure Similar To The Project At Hand With A Construction Cost Of At Least 50 % Of The Abc. 6.4 Financial Requirements The Contractor Must Have A Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc To Be Bid Or Equivalent To Php300,000,000.00. 7. Contents Of The Bid 7.1 In The First Envelope Class “a” Documents Legal Documents I. Philgeps Certificate Of Registration And Membership In Accordance With Section 8.5.2 Of This Irr. For Procurement To Be Performed Overseas, It Shall Be Subject To The Guidelines To Be Issued By The Gppb. (a) Ii. Pcab License And Registration, In Case Of Jv; 57 Iii. Statement Of All Ongoing Government And Private Contracts; Iv. Statement Of Slcc; V. Nfcc Computation; Vi. Jva, If Applicable; Vii. Bid Security In The Prescribed Form, Amount And Validity Period; Viii. Project Requirements, Which Shall Include The Following: 1. Organizational Chart For The Contract To Be Bid; 2. List Of Contractor’s Personnel (design And Construction), To Be Assigned To The Contract To Be Bid, With Their Complete Qualification And Experience Data; 3. List Of Contractor’s Equipment Units Which Are Owned, Leased And/or Under Purchase Agreements, Supported By Certification Of Availability Of Equipment From Lessor/vendor For The Duration Of The Project. Ix. Omnibus Sworn Statement By The Prospective Bidder Or Its Authorized Representative In The Prescribed Format; X. Submission Of Preliminary Conceptual Design Plans: Class “b” Documents I. For Infrastructure Projects, Jv Bidders Shall Submit A Jva In Accordance With R.a. 4566 And It’s Irr. Ii. Each Partner Of The Joint Venture Shall Submit Their Philgeps Certificates Of Registration In Accordance With Section 8.5.2 Of This Irr. The Submission Of Technical And Financial Eligibility Documents By Any Of The Joint Venture Partners Constitutes Compliance: Provided, That The Partner Responsible To Submit The Nfcc Shall Likewise Submit The Statement Of All Of Its Ongoing Contracts And Audited Financial Statements. 1. Preliminary Conceptual Architectural Design Plans In Accordance With The Degree Of Details Specified By The Procuring Entity: (at Suitable Scale On High Quality A3 Blue Print Paper /digital Print Minimum Size) A. Location Plan/vicinity Map B. Perspective C. Floor Plans D. Front View Elevation E. Rear View Elevation F. Left Side View Elevation G. Right Side View Elevation H. Longitudinal Section I. Transverse Section 2. Design And Construction Method 3. List Of Contractor’s Personnel To Be Assigned To The Contract To Be Bid With Their Complete Qualification And Experience Data And Photocopy Of Their Valid Licenses Issued By The Professional Regulatory Commission (prc), Curriculum Vitae Of Key Staff, Partners Or Principal Officers With A Minimum Work Experience Requirements Set In The Bds; For Design The Key Professionals And The Respective Qualifications Of The Design Personnel Shall Be As Follows: • Principal Architect The Principal Architect Must Be Duly-licensed With At Least Ten (10) Years’ Experience In The Design Of Residential, Government Offices Or Institutional Facilities, And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. • Structural Engineer The Structural Engineer Must Be A Duly-licensed Civil Engineer With At Least Ten (10) Years’ Experience In Structural Design And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. • Professional Electrical Engineer The Electrical Engineer Must Be A Registered Professional Electrical Engineer With At Least Five (5) Years’ Experience In The Design Of Lighting, Power Distribution, Communication Systems (specifically Structured And Local Area Network Cabling, Pabx), Building Management Systems And Preferably Knowledgeable In Developments In Emergent Efficient Lighting Technologies And Energy Management. • Professional Mechanical Engineer The Mechanical Engineer Must Be A Professional Mechanical Engineer With At Least Five (5) Years In Hvac And Fire Protection Systems And Preferably Knowledgeable In Emergent, Alternative Energy- Efficient Hvac Technologies. • Electronics And Communications Engineer The Electronics And Communications Engineer Must Be Duly-licensed With At Least Ten (5) Years’ Experience In The Design Of Communications Systems, And Preferably Knowledgeable In The Application Of Building Automation And Surveillance Systems. • Sanitary Engineer The Sanitary Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience In The Design Of Building Water Supply And Distribution, Plumbing, And Preferably Knowledgeable In Waste Water Management/treatment, And Emergent, Alternative Effluent Collection And Treatment System. The Design & Build Contractor May, As Needed And At Its Own Expense, Add Additional Professionals And/or Support Personnel For The Optimal Performance Of All Architectural And Engineering Design Services, As Stipulated In These Terms Of Reference, For The Project. Prospective Bidders Shall Attach Each Individual’s Resume And Prc License Of The (professional) Staff. Design Personnel May Also Be Utilized For The Construction Phase Provided That The Same Meet The Minimum Number Of Years Of Experience In The Construction Of Similar Projects. For Construction Personnel The Key Professionals And The Respective Qualifications Of The Construction Personnel Shall Be As Follows: • Project Manager The Project Manager Shall Be A Licensed Architect Or Engineer With At Least Eight (8) Years Relevant Experience On Similar And Comparable Projects In Different Locations. The Project Manager Should Have A Proven Record Or Managerial Capability Through The Directing/managing Of Major Civil Engineering Works, Including Projects Of A Similar Magnitude. • Project Architect/engineer The Project Architect/engineer Shall Be A Licensed Architect Or Engineer With At Least Five (5) Years’ Experience In Similar And Comparable Projects And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. • Materials Engineer (m.e. I) The Materials Engineer Must Be Duly Accredited With The Dpwh And With At Least Five (5) Years’ Experience In Similar And Comparable Projects And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. • Electrical Engineer The Electrical Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience In Similar And Comparable Projects In The Installation Of Lighting, Power Distribution, Communication Systems (specifically Structured And Local Area Network Cabling, Pabx), Building Management Systems. • Mechanical Engineer The Mechanical Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience In Similar And Comparable Projects In The Installation Of Hvac And Fire Protection. • Sanitary Engineer The Sanitary Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience In Similar And Comparable Projects In The Installation Of Building Water Supply And Distribution, Plumbing. • Foreman The Foreman Must Have At Least Five (5) Years’ Experience In Similar And Comparable Projects And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. • Safety Officer The Safety Officer Must Be An Accredited Safety Practitioner By The Department Of Labor And Employment (dole) And Must Have Undergone The Prescribed Forty (40) Hour Construction Safety And Health Training (cosh) And Must Have At Least Two (2) Years’ Experience. 4. Value Engineering Analysis Of Design And Construction. The Second Envelope (financial Proposal) Shall Contain All The Required Documents For Infrastructure Projects Under Section 25.38 Of The Irr Of R.a 9184. 7.2 In The Second Envelope – Financial Proposal The Contents Of Financial Proposal – In The Second Envelope Shall Be Governed By Section 6.1 Design And Build Scheme Of The Dpwh Procurement Manual Volume Ii - Infrastructure Main Guidelines (2016). A. Lump Sum Bid Prices, Which Shall Include The Detailed Engineering Cost, In The Prescribed Bid Form Inclusive Of Vat B. Detailed Estimates Including A Summary Sheet Indicating The Unit Prices Of Construction Materials, Labor Rates And Equipment Rentals Used In Coming Up With The Bid For The Following: I Detailed Architectural And Engineering Design; Ii Demolition Works; And Iii Building Construction/civil Works. C. Bill Of Quantities D. Cash Flow And Payments Schedule. 8. Procedure And Criteria For Bids Evaluation For The Detailed Evaluation Of The Design And Build Proposals A Two-step Procedure Shall Be Adopted By The Bac, Which May Be Undertaken With The Assistance Of The Dbc. First-step Procedure: With The Assistance Of The Bucor Design And Build Committee (bucor-dbc), The Bac Shall Conduct The Opening, Preliminary Examination And Detailed Evaluation Of The Design And Build Proposals, As Follows: (1) The First Step Of The Evaluation Shall Involve The Review Of The Preliminary Conceptual Designs And Track Record Submitted By The Contract As Indicated In The Bidding Documents Using A Nondiscretionary “pass/fail” Criteria That Involve Compliance With The Following Requirements: A. Performance Specifications And Parameters And Degree Of Details; B. Adherence Of Preliminary Design Plans To The Required Concept Of Approach And Methodology For Detailed Engineering, Design And Construction With Emphasis On The Clarity, Feasibility, Innovativeness And Comprehensiveness Of The Plan Approach, And The Quality Of Interpretation Of Project Problems, Risks, And Suggested Solutions; And C. Quality Of Personnel To Be Assigned To The Project Which Covers Suitability Of Key Staff To Perform The Duties Of The Particular Assignments And General Qualifications And Competence Including Education And Training Of The Key Staff. 8.1 Merit Point Critera For The Bid Evaluation 8.1.1 Adherence To Performance Specifications (35 Points) A. Compliance And Adherence To Specifications: Excellent Compliance (100 Points): The Submission Fully Adheres To All Specified Project Requirements And Regulations, Demonstrating Meticulous Attention To Detail And Comprehensive Understanding Of The Tor. All Drawings And Documentation Are Accurate, Complete, And In Compliance With Relevant Standards. Good Compliance (80 Points): The Submission Largely Complies With Project Specifications And Regulations, With Minor Discrepancies. Drawings And Documentation Are Mostly Accurate And Complete, Meeting The Majority Of Requirements. Acceptable Compliance (70 Points): The Submission Satisfies Most Of The Specified Requirements And Regulations, Albeit With Some Notable Omissions Or Inconsistencies. Drawings And Documentation Are Generally Accurate And Complete, Meeting The Basic Expectations. Some Reservations (50 Points): The Submission Partially Meets The Specified Requirements And Regulations, With Several Notable Deficiencies Or Inconsistencies. There Are Significant Gaps Or Inaccuracies In The Drawings And Documentation, Raising Concerns About Compliance. Serious Reservations (20%) The Submission Falls Significantly Short Of Meeting The Specified Requirements And Regulations, With Major Deficiencies Or Inconsistencies. Drawings And Documentation Lack Essential Details Or Fail To Comply With Key Standards, Casting Doubt On The Bidder's Understanding Of The Project Scope. Unacceptable (0%) The Submission Fails To Comply With The Specified Requirements And Regulations, Lacking Essential Details And Demonstrating A Fundamental Misunderstanding Of The Project Scope. Drawings And Documentation Are Incomplete Or Inaccurate, Indicating A Lack Of Capability To Deliver The Project On Time. B. Functionality And Efficiency: Excellent (100%): The Design Optimally Utilizes Space, Facilitating Efficient Accommodation Of 500 Psdl. Layout And Design Enhance Operational Flow, Demonstrating Exceptional Foresight And Planning. Integration Of Facilities Promotes Smooth Prison Management. Good (80%): The Design Effectively Utilizes Space, With Minor Areas For Improvement In Operational Flow. Layout And Design Contribute To Efficient Prison Management, Meeting Most Functional Requirements. Acceptable (70%): The Design Adequately Utilizes Space, Meeting Basic Requirements For Accommodating 500 Psdl. Layout And Design Support Operational Flow, Though Some Improvements Are Needed For Optimal Functionality. Some Reservations (50%): The Design Partially Optimizes Space Utilization, With Notable Deficiencies In Operational Flow. Layout And Design Hinder Efficient Prison Management, Requiring Significant Adjustments For Improvement. Serious Reservations (20%): The Design Inadequately Utilizes Space, Hindering Accommodation Of 500 Psdl. Layout And Design Severely Impede Operational Flow, Indicating A Lack Of Understanding Of Functional Requirements. Unacceptable (0%): The Design Fails To Optimize Space Utilization, Lacking Consideration For Accommodating 500 Psdl. Layout And Design Pose Significant Obstacles To Efficient Prison Management, Indicating A Fundamental Misunderstanding Of Functional Requirements. C. Safety And Security: Excellent (100%): The Design Features Robust Perimeter Walls, Guard Towers, And Security Features Ensuring Optimal Pdl Containment And Facility Security. Fire Protection And Detection Systems Are Highly Reliable, With Comprehensive Safety Measures For Both Psdl And Staff. Good (80%): The Design Incorporates Effective Perimeter Walls, Guard Towers, And Security Features, With Minor Areas For Enhancement. Fire Protection And Detection Systems Are Reliable, With Adequate Safety Measures For Psdl And Staff. Acceptable (70%) The Design Includes Satisfactory Perimeter Walls, Guard Towers, And Security Features, Meeting Basic Requirements For Pdl Containment And Facility Security. Fire Protection And Detection Systems Are Functional, With Sufficient Safety Measures For Psdl And Staff. Some Reservations (50%): The Design Features Partially Effective Perimeter Walls, Guard Towers, And Security Features, With Notable Deficiencies In Pdl Containment And Facility Security. Fire Protection And Detection Systems Lack Reliability, With Limited Safety Measures For Psdl And Staff. Serious Reservations (20%): The Design Lacks Effective Perimeter Walls, Guard Towers, And Security Features, Compromising Pdl Containment And Facility Security. Fire Protection And Detection Systems Are Inadequate, Posing Significant Risks To Psdl And Staff Safety. Unacceptable (0%): The Design Neglects Perimeter Walls, Guard Towers, And Security Features, Failing To Ensure Pdl Containment And Facility Security. Fire Protection And Detection Systems Are Absent Or Non-functional, Posing Severe Risks To Psdl And Staff Safety. D. Sustainability And Environmental Considerations: Excellent (100%): The Design Includes Robust Safety Measures And Emergency Protocols, Ensuring The Safety And Well-being Of Psdl And Staff In Accordance With Ra 10575. Good (80%): The Design Integrates Sustainable Design Principles Effectively, With Minor Opportunities For Improvement In Energy Efficiency And Material Selection. Sewage Treatment And Water Conservation Measures Are Adequate, Supporting Environmental Sustainability. Acceptable (70%) The Design Includes Basic Sustainable Design Principles, Meeting Minimum Requirements For Energy Efficiency And Material Selection. Sewage Treatment And Water Conservation Measures Are Functional, Contributing To Environmental Sustainability. Some Reservations (50%): The Design Partially Incorporates Sustainable Design Principles, With Notable Deficiencies In Energy Efficiency And Material Selection. Sewage Treatment And Water Conservation Measures Lack Comprehensiveness, Limiting Environmental Sustainability. Serious Reservations (20%): The Design Lacks Consideration For Sustainable Design Principles, Neglecting Energy Efficiency And Eco-friendly Materials. Sewage Treatment And Water Conservation Measures Are Insufficient, Undermining Environmental Sustainability. Unacceptable (0%): The Design Disregards Sustainable Design Principles, Showing No Commitment To Energy Efficiency Or Eco-friendly Materials. Sewage Treatment And Water Conservation Measures Are Absent Or Inadequate, Disregarding Environmental Sustainability. E. Aesthetics And Architectural Design: Excellent (100%): The Design Exhibits Exceptional Aesthetic Appeal And Architectural Coherence, Showcasing Innovative And Visually Pleasing Elements. Consideration Of Local Architectural Vernacular And Contextual Integration Is Evident, Contributing To The Overall Excellence Of The Design. Good (80%): The Design Demonstrates Good Aesthetic Appeal And Architectural Coherence, With Some Areas For Enhancement In Creativity And Visual Impact. Consideration Of Local Architectural Vernacular And Contextual Integration Is Apparent, Enriching The Design. Acceptable (70%): The Design Achieves Acceptable Aesthetic Appeal And Architectural Coherence, Meeting Basic Expectations For Visual Presentation. Consideration Of Local Architectural Vernacular And Contextual Integration Is Present, Though Limited In Scope. Some Reservations (50%): The Design Lacks Significant Aesthetic Appeal And Architectural Coherence, With Notable Deficiencies In Creativity And Visual Impact. Consideration Of Local Architectural Vernacular And Contextual Integration Is Minimal, Detracting From The Overall Quality Of The Design. Serious Reservations (20%): The Design Exhibits Poor Aesthetic Appeal And Architectural Coherence, Failing To Engage Visually Or Inspire Interest. Consideration Of Local Architectural Vernacular And Contextual Integration Is Lacking, Diminishing The Design's Relevance And Appropriateness. Unacceptable (0%): The Design Lacks Any Aesthetic Appeal Or Architectural Coherence, Showing No Effort To Engage Visually Or Integrate With The Local Architectural Vernacular. Consideration Of Contextual Integration Is Absent, Rendering The Design Unsuitable For The Project. 8.1.2 Approach And Methodology For Detailed Engineering, Design, And Construction (40 Points) Excellent (100%): The Concept Of Approach And Methodology For Detailed Engineering, Design, And Construction Is Exceptionally Clear, Feasible, Innovative, And Comprehensive. The Plan Demonstrates A High Level Of Understanding Of Project Problems, Risks, And Suggested Solutions, With Well-defined Strategies For Addressing Them. Good (80%): The Concept Of Approach And Methodology For Detailed Engineering, Design, And Construction Is Clear, Feasible, And Comprehensive, With Some Innovative Elements. The Plan Adequately Addresses Project Problems, Risks, And Suggested Solutions, Though Some Areas May Require Further Development. Acceptable (70%): The Concept Of Approach And Methodology For Detailed Engineering, Design, And Construction Satisfactorily Addresses Project Requirements, With A Basic Level Of Clarity And Feasibility. The Plan Outlines Strategies For Addressing Project Problems, Risks, And Suggested Solutions, Meeting The Minimum Expectations. Some Reservations (50%): The Concept Of Approach And Methodology For Detailed Engineering, Design, And Construction Partially Addresses Project Requirements, With Notable Gaps In Clarity And Feasibility. The Plan Lacks Innovative Elements And May Inadequately Address Project Problems, Risks, And Suggested Solutions. Serious Reservations (20%): The Concept Of Approach And Methodology For Detailed Engineering, Design, And Construction Demonstrates Significant Deficiencies In Clarity, Feasibility, And Comprehensiveness. The Plan Fails To Adequately Address Project Problems, Risks, And Suggested Solutions, Indicating A Lack Of Understanding Or Inadequate Planning. Unacceptable (0%): The Concept Of Approach And Methodology For Detailed Engineering, Design, And Construction Is Unclear, Infeasible, And Lacks Comprehensiveness. The Plan Fails To Address Project Problems, Risks, And Suggested Solutions, Indicating A Fundamental Misunderstanding Or Disregard For Project Requirements. 8.1.3 Quality Of Personnel Assigned To The Project (25 Points) Excellent (100%): The Personnel Assigned To The Project, Including Key Staff, Are Highly Suitable And Competent To Perform Their Duties. Key Staff Members Possess Exceptional Qualifications, Competence, Education, And Training Relevant To Their Roles, Demonstrating A High Level Of Expertise And Experience. Good (80%): The Personnel Assigned To The Project, Including Key Staff, Are Suitable And Competent To Perform Their Duties Effectively. Key Staff Members Possess Relevant Qualifications, Competence, Education, And Training, Demonstrating Solid Expertise And Experience. Acceptable (70%): The Personnel Assigned To The Project, Including Key Staff, Meet The Basic Requirements For Suitability And Competence In Performing Their Duties. Key Staff Members Possess General Qualifications And Competence, Education, And Training Relevant To Their Roles, Meeting The Minimum Expectations. Some Reservations (50%): The Personnel Assigned To The Project, Including Key Staff, Demonstrate Some Suitability And Competence In Performing Their Duties, But Notable Deficiencies Are Present. Key Staff Members May Lack Certain Qualifications, Competence, Education, Or Training, Raising Concerns About Their Ability To Effectively Fulfill Their Roles. Serious Reservations (20%): The Personnel Assigned To The Project, Including Key Staff, Exhibit Significant Deficiencies In Suitability And Competence To Perform Their Duties. Key Staff Members Lack Essential Qualifications, Competence, Education, Or Training, Indicating A Lack Of Expertise Or Experience Relevant To Their Roles. Unacceptable (0%): The Personnel Assigned To The Project, Including Key Staff, Are Unsuitable And Incompetent To Perform Their Duties Effectively. Key Staff Members Lack The Necessary Qualifications, Competence, Education, And Training, Demonstrating A Fundamental Mismatch With The Requirements Of Their Roles. 8.2 Determination Of The Merit Point Score The Aggregate Of The Scores In Each Criterion Must Be 70% Or More To Pass Using The Following Formula In Equation. Description Weight (w) Rating (r) Criteria 1 35% (smax/sact) Criteria 2 40% Sact Criteria 3 25% Sact Smax = Η (100) Sact = R1 +r2 +r3 + . . .(rη) Where Η = Number Of Sub Criteria R = Rating Given To The Criteria/sub Criteria The Actual Score (sact) For Each Of The Criteria/sub Criteria Is Obtained By Adding All The Given Rating. (smax) Is The Summation Of Maximum Score Per Criteria 8.3 Passing Rate The Specific Passing Rate Value Depends On The Specific Context Of The Project, The Priorities Of The Design And Build Committee, And The Complexity Of The Requirements Outlined In Ra 10575. Based On The Provided Criteria And Descriptions, The Passing Rate For The Merit Point Criteria (mpc) Could Be Set At 75%. This Means That Bidders Must Score At Least 75% Or Higher In The Evaluation Process To Be Considered As Meeting The Minimum Requirements For The Project A. Pass Rate Per Criteria Will Be Determined Using The Formula: Score = W1*r1 + W2*r2 + W3*r3 B. A Bid Or Technical Bid That Failed In Any Of The Criteria’s Will Not Be Considered For Further Evaluation C. Score Above 75% Will Be Considered As Technically Responsive. Aggregate Score Of Less Than 75% Will Be Considered Failed, And May Be Rejected On That Basis. Second-step Procedure: Only Those Bids That Passed The Above Criteria Shall Be Subjected To The Second Step Of Evaluation. The Bac Shall Open The Financial Proposal Of Each “passed” Bidder And Shall Evaluate It Using Non-discretionary Criteria – Including Arithmetical Corrections For Computational Errors – As Stated In The Bidding Documents, And Thus Determine The Correct Total Calculated Prices. The Bac Shall Automatically Disqualify Any Total Calculated Bid Price Which Exceeds The Abc 9. Data To Be Provided By The Bucor These Data Are For Reference Only And Does Not Guarantee The Contractor That The Data Provided Are Correct, Free From Error, And Applicable To The Project At Hand. The Contractor Is Responsible For The Accuracy Or Applicability Of Any Data That He Will Use In His Design– Build Proposal And Services. Sample Data For Buildings: A. Conceptual Plans 10. Documents To Be Provided By The Contractor During Contract Implementation A. Detailed Architectural And Engineering Plans B. Design Analysis C. Survey Data D. Quantity Calculation E. Detailed Geotechnical Investigation Report F. Design Report. G. As-built Plans, (printed Including Cad Files And Bim Files (lod 500) H. Other Relevant Documents 11. Design And Build Period The Winning Bidder Shall Commence Actual Works Upon The Issuance By The Bucor Of The Notice To Proceed (ntp). The Winning Bidder Shall Complete The Daed And Submit Within The Ninety (60) Calendar Days (cds) Period To The Bucor For Review And Approval. The Contractor Shall Complete The Construction Of The Building Within 305 Cds For The Total Contract Duration Of 365 Cd. Conforme: Name Of Company In Print Signature Over Printed Name Of Authorized Representative/date Section Vii. Drawings The Conceptual Drawings Should Be Attached To This Section Or Annexed In A Separate Folder As Part Of The First Envelope (technical Component Envelope). Preliminary Conceptual Architectural Design Plans In Accordance With The Degree Of Details Specified By The Procuring Entity: At Suitable Scale On High Quality A3 Blue Print Paper /digital Print Minimum Size) 1. Location Plan/vicinity Map 2. Perspective 3. Floor Plans 4. Front View Elevation 5. Rear View Elevation 6. Left Side View Elevation 7. Right Side View Elevation 8. Longitudinal Section 9. Transverse Section Section Viii. Bill Of Quantities The Bill Of Quantities Should Be Attached To This Section As Part Of The Second Envelope (financial Component Envelope). Section Ix. Checklist Of Technical And Financial Documents Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; Technical Documents ⬜ (b) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided Under The Rules; And ⬜ (d) Special Pcab License In Case Of Joint Ventures And Registration For The Type And Cost Of The Contract To Be Bid; And ⬜ (e) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And (f) Project Requirements, Which Shall Include The Following: ⬜ A. Organizational Chart For The Contract To Be Bid; ⬜ B. List Of Contractor’s Key Personnel (e.g., Project Manager, Project Engineers, Materials Engineers, And Foremen), To Be Assigned To The Contract To Be Bid With Their Complete Qualification And Experience Data And Photocopy Of Their Valid Licenses Issued By The Professional Regulatory Commission (prc) And Curriculum Vitae Of Key Staff, Partners Or Principal Officers With A Minimum Work Experience Requirements Set In The Bds; ⬜ C. List Of Contractor’s Major Equipment Units, Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership Or Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be; And ⬜ (g) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate Or Board Resolution/partnership Resolution In Case Of A Corporation, Partnership, Or Cooperative; Or Original Notarized Special Power Of Attorney In Case Of Sole Proprietorship Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. And ⬜ (h) Conformity With The Technical Specifications (scope Of Work); And ⬜ (i) Preliminary Conceptual Architectural Design Plans In Accordance With The Degree Of Details Specified By The Procuring Entity: (at Suitable Scale On High Quality A3 Blue Print Paper /digital Print Minimum Size) 1. Location Plan/vicinity Map 2. Perspective 3. Floor Plans 4. Front View Elevation 5. Rear View Elevation 6. Left Side View Elevation 7. Right Side View Elevation 8. Longitudinal Section 9. Transverse Section ⬜ (j) Design And Construction Method And ⬜ (k) Value Engineering Analysis Of The Design And Construction Method. And Financial Documents ⬜ (l) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc. And Class “b” Documents ⬜ (m) Jv Bidders Shall Submit A Jva In Accordance With R.a. 4566 And Its Irr. Each Partner Of The Joint Venture Shall Submit Their Respective Philgeps Certificates Of Registration In Accordance With Section 8.5.2 Of This Irr. The Submission Of Technical And Financial Eligibility Documents By Any Of The Joint Venture Partners Constitutes Compliance: Provided, That The Partner Responsible To Submit The Nfcc Shall Likewise Submit The Statement Of All Of Its Ongoing Contracts And Audited Financial Statements. Ii. Financial Component Envelope ⬜ (n) Original Of Duly Signed And Accomplished Financial Bid Form; And Other Documentary Requirements Under Ra No. 9184 ⬜ (o) Original Of Duly Signed Bid Prices In The Bill Of Quantities; And ⬜ (p) Duly Accomplished Detailed Estimates Form, Including A Summary Sheet Indicating The Unit Prices Of Construction Materials, Labor Rates, And Equipment Rentals Used In Coming Up With The Bid; And ⬜ (q) Cash Flow And Payment Schedule. Bidding Form Company Letterhead Statement Of Ongoing Government & Private Contracts Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) Statement Of All Its Ongoing Government And Or Private Contracts Including Contracts Awarded But Not Yet Started, If Any Whether Similar Or Not Similar In Nature. Name Of Contract Date Of Contract Contract Duration Owner’s Name And Address Nature Of Work Contractor’s Role (whether Sole Contractor, Subcontractor, Or Partner In A Jv) And Percentage Of Participation Total Contract Value At Award Date Of Completion Or Estimated Completion Time Value Of Outstanding Works Certified Correct: Name And Signature Of Authorized Representative Position Date Company Letterhead Statement Of Single Largest Completed Contract Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) Statement Of Single (1) Largest Completed Contract Of Similar In Nature Within The Last Six (6) Years From The Date Of Submission And Receipt Of Bids Amounting To At Least Fifty Percent (50%) Of The Approved Budget Of The Contract (abc) Name Of Contract Date Of Contract Contract Duration Owner’s Name And Address Nature Of Work Contractor’s Role (whether Sole Contractor, Subcontractor, Or Partner In A Jv) And Percentage Of Participation Total Contract Value At Award Amount Of Completed Contracts, Adjusted By The Bidder To Current Prices Using Psa’s Consumer Price Index, If Necessary Date Of Completion Or Estimated Completion Time Certified Correct: Name And Signature Of Authorized Representative Position Date Company Letterhead Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) Republic Of The Philippines) City Of _______________________) S.s. X------------------------------------------------------x Bid Securing Declaration Invitation To Bid: [insert Reference Number] To: Bureau Of Corrections I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid-securing Declaration. 2. I/we Accept That: (a) I/we Will Be Automatically Disqualified From Bidding For Any Contract With Any Procuring Entity For A Period Of Two (2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen (15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1, Except 69.1(f), Of The Irr Of Ra 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid Securing Declaration Shall Cease To Be Valid On The Following Circumstances: (a) Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; (b) I Am/we Are Declared Ineligible Or Post-disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; (c) I Am/we Are Declared The Bidder With The Lowest Calculated Responsive Bid, And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ____ Day Of [month] [year] At [place Of Execution]. ______________________________________________________ [insert Name Of Bidder’s Authorized Representative] _____________________________ [insert Signatory’s Legal Capacity] Affiant Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ____________ Issued On ______________ At ___________________________________. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued Doc. No. _____ Page No. _____ Book No. _____ Series Of ____ Company Letterhead Omnibus Sworn Statement Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) _________________________________________________________________________ Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) Of The Bureau Of Corrections, As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) Of The Bureau Of Corrections, As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase). 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 2024 At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory Affiant Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ____________ And Issued On ____________________ At _____________________. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued] Doc. No. _____ Page No. _____ Book No. _____ Series Of _____ Company Letterhead Certificate Of Net Financial Contracting Capacity Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) (please Show Figures At How You Arrived At The Nfcc) This Is To Certify That Our Net Financial Contracting Capacity (nfcc) Is _____________________ (p____________) Which Is At Least Equal To The Total Ceiling Price We Are Bidding. The Amount Is Computed As Follows: (please Show Computation Of Nfcc) Nfcc = (ca-cl) (15) – C Where: Ca = Current Assets Cl = Current Liabilities C = Value Of All Outstanding Or Uncompleted Portions Of The Projects Under Going Contracts, Including Awarded Contracts Yet To Be Started Coinciding With The Contract For This Project Note: The Values Of The Bidder’s Current Assets And Current Liabilities Shall Be Based On The Audited Financial Statement Submitted To The Bir. Issued This _________________day Of ________________, 2024 _______________________________________________ Name & Signature Of Authorized Representative ____________________ Position _______________ Date Company Letterhead Bid Form Date: Ib No: To Bids And Awards Committee Bureau Of Corrections Nbp Reservation Muntinlupa City We, The Undersigned, Declare That: (a) We Have Examined And Have No Reservation To The Bidding Documents, Including Addenda, For The Contract Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) (b) We Offer To Execute The Works For This Contract In Accordance With The Bid And Bid Data Sheet, General And Special Conditions Of Contract Accompanying This Bid; The Total Price Of Our Bid, Excluding Any Discounts Offered Below Is: ________________________________________₱_________________; The Discounts Offered And The Methodology For Their Application Are: [insert Information]; (c) Our Bid Shall Be Valid For A Period Of 120 Calendar Days From The Date Fixed For The Bid Submission Deadline In Accordance With The Bidding Documents, And It Shall Remain Binding Upon Us And May Be Accepted At Any Time Before The Expiration Of That Period; (d) If Our Bid Is Accepted, We Commit To Obtain A Performance Security In The Amount Of 30% Percent Of The Contract Price For The Due Performance Of The Contract; (e) Our Firm, Including Any Subcontractors Or Suppliers For Any Part Of The Contract, Have Nationalities From The Following Eligible Countries; (f) We Are Not Participating, As Bidders, In More Than One Bid In This Bidding Process, Other Than Alternative Offers In Accordance With The Bidding Documents; (g) Our Firm, Its Affiliates Or Subsidiaries, Including Any Subcontractors Or Suppliers For Any Part Of The Contract, Has Not Been Declared Ineligible By The Funding Source; (h) We Understand That This Bid, Together With Your Written Acceptance Thereof Included In Your Notification Of Award, Shall Constitute A Binding Contract Between Us, Until A Formal Contract Is Prepared And Executed; And (i) We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Other Bid That You May Receive. (j) We Likewise Certify/confirm That The Undersigned, Is The Duly Authorized Representative Of The Bidder, And Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For The Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) Of The Bureau Of Corrections. (k) We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Including The Bill Of Quantities, Shall Be A Ground For The Rejection Of Our Bid. Name: In The Capacity Of: Signed: Duly Authorized To Sign The Bid For And On Behalf Of: Date: ___________