Furniture Tenders

Details: Description Item Description 1 Lot Procurement And Installation Of Various Equipment For The Establishment Of Lgu-burauen Diagnostic Center (health And Wellness Facility) Item 1: First Pass Reverse Osmosis System (1 Set) The First Pass Reverse Osmosis System Should Include The Following Components And Specifications: • Ro Pumps: O Quantity: 2 Units (alternating) O Type: 2 Hp Single Phase Reverse Osmosis Multi-stage Vertical Pumps O Operating Pressure: 200 To 250 Psi O Material: High-grade Stainless Steel Construction O Backup Function: 1 Unit Will Function Automatically When The Other Pump Stops. • Membranes: O Quantity: 3 Units O Type: 4040 Thin Film Composite (tfc) Spiral Wound Membranes O Design: Large Spiral Configuration For High Permeate Flow. • Pressure Vessels: O Quantity: 3 Units O Type: 4040 Frp Pressure Membrane Vessel. • Pre-filtration: O Quantity: 1 Unit O Type: 20" Slim Filter Housing With 5-micron Sediment Filter (clear Housing). • Aami Standard Compliance: All Components In Contact With Pure Water Must Meet Aami (association For The Advancement Of Medical Instrumentation) Standards. • Flow Meters: O Quantity: 2 Units (panel-mounted) O Range: 0-10 Gpm O Measurement: Percentage Rejection, Percentage Recovery, And Permeate/product Flow. • Additional Flow Meters: O Quantity: 1 Unit (for Recycle Water Flow Monitoring). • Pressure Gauges: O Quantity: 2 Units (dial Type) O Pressure Rating: 350 Psi And 150 Psi O Material: Stainless Steel Construction. • Pressure Regulator Control Valve: O Quantity: 1 Unit O Size: 1” Npt O Material: Stainless Steel 316. • Conductivity Meter: • Quantity: 1 Unit • Type: Digital Conductivity Meter (tds Meter For First-stage Pure Water Product). • Automatic Control System: Integrated Automatic Control System For Managing The Operation Of The Ro System. • Recycle Valve And Flushing Option: The System Should Be Equipped With A Recycle Valve And An Automatic Flushing Option. • Low-pressure Switch: • Quantity: 1 Unit • Function: Automatically Stops The Ro Pump When Low Pressure Is Detected. • Solenoid Valves: • Automatic Shut-off Solenoid Valve: 1” Npt (manual Bypass In Case Of Malfunction). • Auto Flushing Solenoid Valve: 1/2” Npt. • Skid Frame: • Material: Stainless Steel Full Skid Frame For Mounting All System Components. • Independent Control System: For Monitoring And Controlling The Ro Process. • Sampling Port: Equipped With A Sampling Port For Pure Water Sampling. Item 2: Second Pass Reverse Osmosis Unit (1 Set) The Second Pass Reverse Osmosis Unit Should Include The Following Components And Specifications: • Ro Pumps: O Quantity: 2 Units (alternating) O Type: 1.5 Hp Reverse Osmosis Multi-stage Vertical Pumps O Operating Pressure: 200 To 250 Psi O Material: High-grade Stainless Steel Construction O Backup Function: 1 Unit Will Function Automatically When The Other Pump Stops. • Pressure Vessels: O Quantity: 2 Units O Type: 4040 Frp Pressure Membrane Vessel. Item 3: Pre-treatment Equipment Specifications (1 Set) The Pre-treatment Equipment Includes The Following Components: • Multi-media Filtration Unit: O Quantity: 1 Unit O Size: 13” X 54” Frp Tank O Media: Pebbles, Silica Sand, Anthracite, And Garnet For 10-20 Micron Removal. O Backwashing Head: Manual/automatic Timer Backwashing Head. O Accessories: Pressure Gauges On The Inlet And Outlet, Valve For Water Sampling, And Emergency Bypass Valve. • Granulated Activated Carbon Filtration Unit: O Quantity: 2 Units O Size: 13” X 54” Frp Tanks O Media: Pebbles, Quartz Sand, And Industrial-grade Activated Carbon. O Backwashing Head: Manual/automatic Timer Backwashing Head. O Accessories: Pressure Gauges On The Inlet And Outlet, Valve For Water Sampling, And Emergency Bypass Valve. • Water Softener Filtration Unit: O Quantity: 1 Unit O Size: 13” X 54” Frp Tank O Media: Pebbles And Purolite Resin C-100e. O Backwashing Head: Manual/automatic Timer Backwashing Head. O Accessories: Pressure Gauges On The Inlet And Outlet, Valve For Water Sampling, And Emergency Bypass Valve. • Sampling Ports: Sampling Ports For Multi-media, Carbon, And Water Softener Filters. • Pressure Gauges: Individual Pressure Gauges For Each Filter (multi-media, Carbon, And Water Softener). • Raw Water Tank: O Quantity: 1 Set O Capacity: 1000 Liters O Material: Polyethylene With Float Valve. • Brine Tank: O Quantity: 1 Unit O Capacity: 130 Kg Of Salt O Accessories: Hose And Strainer. • Raw Water Pump System: O Quantity: 2 Units (alternating) O Type: 1.5 Hp Single Phase Raw Water Multi-stage Horizontal Stainless Steel Pump With Automatic Backup Functionality. • Piping: O Material: Schedule 40 Pvc Pipe With Ball Valves And Fittings. O Fittings: Stainless Steel Fittings. Item 4: Support/service Maintenance (1 Set) The Following Services Will Be Included For The Support And Maintenance Of The Water Treatment System: • Installation: Complete Installation Of The Water Treatment System With Training For Operation And Maintenance. • Technical Support: Accessibility For Addressing Any Malfunctions Or Technical Problems Within The Warranty Period. • Spare Parts: Availability Of Local Spare Parts For Maintenance. • Service Personnel: Availability Of Service Personnel Within The Warranty Period. • Operator And Technical Manual: Full Set Of Manuals For Operation And Maintenance. • Initial Water Analysis: Complete Initial Water Quality Analysis To Ensure System Suitability. Item 5: 5-station Dialyzer Reprocessing System (1 Set) (wall Mounted For Negative Hepa Patient) The Following Specifications Apply To The 5-station Dialyzer Reprocessing System: • Frame Material: Panel Box-type Frame (pvc Material). • Dialyzer Testing Parameters: Max Testing Pressure: 8-14 Psi. • Pressure Regulator Valve: Adjustable Between 15-35 Psi. • Piping And Fittings: Pvc Pipes And Fittings; Chemical-grade Hoses And Fittings. • Chemical Compatibility: System Must Be Compatible With All Types Of Disinfectants. • Chemical Tank: 10 Liters Polyethylene Chemical Tank. • Dialyzer Connectors: 5 Quick-connect Dialyzer Holders. • Chemical Pump: 1 Unit For Chemical Application. • Electrical Control System: Fully Integrated Electrical Control System For Operation. • Solenoid Valves: Ce Certified Stainless Steel Solenoid Valves For Dialyzer Cleaning, Filling Chemicals, And Auto Reverse Ultrafiltration. • Graduated Cylinder: 250 Ml Plastic Graduated Cylinder. Installation & Training: • Full Installation And Training For Operation, Maintenance, And Safety Procedures. Support/service Maintenance: • Installation And Training: Full Setup And Operator Training. • Technical Support: Access To Local Service Personnel During Warranty Period. • Spare Parts Availability: Availability Of Spare Parts Locally During The Warranty Period. • Technical Manual: Full Operator And Technical Manuals. Item 6: 2 Station Dialyzer Reprocessing Machine For Positive Hepa Patient (1 Set) Specifications: • Frame Material O Panel Box Type (pvc Materials) • Dialyzer Testing Parameters O 1 Unit Dialyzer Testing Parameters With Maximum Pressure Range: 8-14 Psi • Pressure Regulator Valve O 1 Unit Adjustable Pressure Regulator Valve, Range: 15-35 Psi • Piping And Fittings O Pvc Pipe And Fittings • Chemical Grade Hose And Fittings O Chemical-grade Hose And Fittings For Safe Operation With Disinfectants And Cleaning Solutions. • Compatibility O Machine Is Compatible With Any Type Of Disinfectant Commonly Used In Dialyzer Reprocessing. • Electrical Control System O Integrated Electrical Control System For Efficient Operation. • Electronic Control Board O 1 Unit Electronic Control Board Designed To Manage Dialyzer Testing Parameters. • Solenoid Valves For Dialyzer Cleaning O 2 Pcs Ce Certified Stainless Steel (s/s) Solenoid Valves For Dialyzer Cleaning Procedure. • Solenoid Valves For Chemical Filling • 2 Pcs Ce Certified Stainless Steel (s/s) Solenoid Valves For Dialyzer Chemical Filling. • Solenoid Valves For Auto Reverse Ultra Filtrate • 2 Pcs Ce Certified Stainless Steel (s/s) Solenoid Valves For Auto Reverse Ultra Filtrate During The Cleaning Cycle. • Programmable Logic Controller (plc) • 1 Unit Plc (programmable Logic Controller) With The Following Specifications: O Input: 16 Digital Inputs O Output: 10 Digital Outputs O Voltage: 110-240vac • Secondary Programmable Logic Controller (plc) • 1 Unit Secondary Plc With The Following Specifications: O Input: 10 Digital Inputs O Output: 4 Digital Outputs O Voltage: 110-240vac • Illuminated Push Button Switches (rinsing Procedure) • 2 Units Of Illuminated Green Push Button Switches (indicating Rinsing Procedure Is Active). • Illuminated Push Button Switches (chemical Filling) • 2 Units Of Illuminated Red Push Button Switches (indicating Chemical Filling Is In Progress). • Diaphragm Type Air Pump • 1 Unit Diaphragm-type Air Pump To Provide Necessary Air Pressure For The System. • Plastic Graduated Cylinder • 1 Unit 250 Ml Plastic Graduated Cylinder For Accurate Measurement. • Dialyzer Connector • 2 Pcs Dialyzer Connectors For Secure And Leak-free Connections During Operation. ________________________________________ Support/service Maintenance: • Installation And Training O On-site Installation And Operator Training To Ensure Proper Usage And Maintenance. • Technical Support O Quick Access To Technical Support And Troubleshooting Services During The Warranty Period. • Spare Parts Availability O Local Availability Of Critical Spare Parts To Minimize Downtime. • Service Personnel Availability O Availability Of Trained Service Personnel To Address Any Operational Issues During The Warranty Period. • Operator And Technical Manual O Comprehensive Operator And Technical Manuals Provided For Easy Reference And Proper Maintenance. Item 7: Acid & Bi-carb Mixer (2 Set) Specifications: • 1 Unit Mix Flow Agitator Pump With Propeller • 1 Unit Magnet Chemical Pump • 1 Unit 100 Liters Polyethylene Conical Tank With Stainless Steel Base • 1 Unit 10" Filter Housing With Micron Filter • Electrical Control System With Panel Box • Pvc Pipe And Fittings Support/service Maintenance: • Installation And Training For Operation And Maintenance. • Accessibility To Address Malfunctions Or Technical Issues Within The Warranty Period. • Availability Of Spare Parts Locally To Minimize Downtime. • Availability Of Service Personnel During The Warranty Period For Prompt Assistance. • Operator And Technical Manual With Detailed Instructions On Operation, Troubleshooting, And Maintenance. Item 8: Construction Of Wood Paneling (1 Set) Specifications: • Fabrication Of Wood Paneling Using ¾" Marine Plywood, Finished With Laminate Formica. • Supply And Installation Of Recirculation Piping System Using Schedule 40 High-pressure Pipe And Fittings. Item 9: Dialyzer Rack (1 Set) Specifications: • Floor-to-ceiling Rack Designed To Hold 110 Dialyzer Units With Secure Storage And Easy Access. Item 10: Defibrillator (1 Set) Technical Specifications: • Defibrillator Type: Manual, Synchronized, Asynchronous • Energy Accuracy: ±1% • Energy Selection: 0, 20, 50, 100, 160, 250, 300, 360 Joules (nominal At A Resistance Of 50) • Charging Time: Maximum 10 Seconds To 360 Joules • Standard Adult/pediatric Paddles: Reusable External Adult Paddles (pediatric Paddles Integrated) Power Requirements: • Ac Power Supply: 100v~240v, 50hz/60hz • Vehicle Voltage (optional): Dc 12v Internal Battery Backup: • Battery Type: Rechargeable Lead-acid Battery (12v 2.0ah X2) • Charging Time: Minimum 4 Hours For Full Charge • Battery Charging: Charged During Ac Power Supply Operation • Charging/low Battery Indication: Red Led • Battery Capacity: 100% Charge Provides 120 Minutes Of Monitoring Or 35 Discharges At 360 Joules. Display: • Lcd Dimensions: 7-inch High-resolution True-color Graphic Display Ecg Features: • Ecg Lead: I, Ii, Iii, Avr, Avl, Avf, V1~v6 • S-t Segment Analysis: -2.0mv~+2.0mv • Arrhythmia Analysis: Yes • Protection: Withstands 4000v Ac/50hz Voltage Isolation And Protection Against Electrosurgical Knives And Defibrillation. Respiration: • Measurement Method: Thoracic Impedance Standard Configuration: • Ecg, Respiration, Defibrillator Monitoring Optional Parameters: • Recorder • Li-ion Battery (11.1v 4ah X2) Support/service Maintenance: • Installation And Training On Device Setup And Use. • Accessibility To Address Malfunctions Or Technical Issues Within The Warranty Period. • Availability Of Spare Parts Locally To Minimize Downtime. • Availability Of Service Personnel Within The Warranty Period For Fast Response And Repairs. • Operator And Technical Manual With Comprehensive Guides For Safe Operation And Maintenance. Item 11: Hemodialysis Machine With Hemodialysis Chairs, Machine Avr & Television Set (12 Set) The Hemodialysis Machine With Hemodialysis Chairs & Avr Is A High-performance Medical Device Designed To Efficiently Support Various Dialysis Treatments, Including Hemodialysis (hd), Intermittent Ultrafiltration (iuf), Low Flux Continuous Dialysis, High-pressure (hp) Treatments, Plasma Exchange, And Plasma Adsorption. This System Ensures The Safe, Efficient, And Precise Treatment Of Patients With Renal Failure. Key Features: 1. Intelligent Operation: • Lcd Touch Screen: A Multi-angle Rotating Screen With A Multi-language Interface (chinese, English, Etc.), Ensuring Easy Operation And Accessibility. • Guided Operation Interface: Simplifies User Interaction, Providing Step-by-step Guidance For Efficient Machine Operation. • Automated Power On/off & Disinfection: Automatic Settings For Daily Power Cycles And Disinfection Procedures, All Conditions Are Recorded For Traceability. • Automatic Venous Level Detector: Prevents Blood Exposure To Air, Reducing The Risk Of Contamination. • Kt/v Calculation: Monitors Dialysis Efficiency And Ensures Treatment Adequacy. • Substitution Automatic Rinsing: Reduces Hospital Staff Workload And Minimizes Operational Costs. • Automatic Dialyzer Charging & Discharging: Enhances Operational Efficiency And Reduces Manual Labor. • Real-time History Recording: Treatment Parameters, Patient Info, And Running Conditions Can Be Recorded And Retrieved In Real-time For Optimal Monitoring. • Intelligent Maintenance System: Ensures Easy Maintenance And Alerts Users To Any Issues. • Brushless Rotor: Increases System Longevity And Simplifies Maintenance. • Ultrafiltration Clearance: Achieves A 0.1% Accuracy In Ultrafiltration, Improving Dialysis Outcomes. • Three Motor Pump: Ensures Steady, Reliable Fluid Management Throughout The Treatment. • Upgradeable Operating System: The Machine’s Software Can Be Upgraded For Enhanced Functionality. 2. Safety Features: • Individual System Control: Separate Control Of Blood, Hydraulic, And Monitor Systems, Each Equipped With Safety Protocols. • Mandatory Testing: Over Ten Mandatory Tests For Systems Such As Balance, Mixing, Uf, Air Detection, Blood Leakage, Etc., Ensuring Reliable Machine Performance. • Hydraulic And Leakage Monitoring: Ensures Safety During Dehydration Processes And Prevents Leaks. • Ultrasonic & Optical Venous Monitoring: Ensures Safe Blood Return By Detecting Tiny Bubbles. • Led And Audio Alarms: Multi-color Led (red, Yellow, Green) Indicators, Coupled With Various Sound Alarms For Enhanced User-friendliness. • Backup Power Supply: Provides 40 Minutes Of Backup Power In Case Of An Electrical Outage. • Ap, Vp, Tmp Monitoring: Quick Alarm Alerts For Abnormal Pressure Conditions. • Double-stage Endotoxin Filtration: Ensures The Substitution Fluid Meets Aami Standards For Quality. • Advanced Volume Balance Control: Maintains Accurate Ultrafiltration For Precise Patient Treatment. • Dialysate Mixing System: Ensures Accurate Ionic Concentration In The Dialysate For Optimal Treatment. • Integrated Air Detection And Blood Recognition: Detects Even The Smallest Air Bubbles To Prevent Safety Risks. • Bicarb Fluid: Helps Avoid Microbial Contamination In The B Fluid. 3. Powerful Functionality: • Syringe Support: Includes 10ml, 20ml, 30ml, And 50ml Syringes, Which Are Automatically Recognized And Can Be Self-tested For Errors. Fully Supports Heparin Profile Management. • Automatic Vital Signs Monitoring: The Machine Automatically Tracks Patient Heart Rate And Blood Pressure During Treatment, Reducing Staff Workload. • Ultra-pure Dialysate Supply: Ensures The Highest Quality Of Dialysis Fluid For Improved Patient Outcomes. • Isolated Hp Mode: Reduces Self-test Time And Minimizes Dialysate Wastage. • Customizable Dialysate Formula: Pre-set And Customizable Dialysate Formulations Are Compatible With A Wide Range Of Solutions Or Powders. • Flexible Dialysis Options: Supports Both Single And Double-needle Dialysis Configurations For Varying Clinical Needs. • Standard And Custom Profiles: Offers Customizable Profiles For Sodium, Uf Rate, Bicarbonate, Heparin Flow, Dialysate Flow, And Temperature, Tailoring Treatment To Individual Patient Needs. • Sequential Dialysis Process: Supports Treatments Such As Sequential Dialysis (hd→iuf) Or High-low Sodium Sequential Dialysis. • Network Usb Integration: Enables Patient Data And Machine Management Through Central Systems. • Central Dialysate Supply Integration: Seamlessly Connects To Centralized Dialysate Supply Systems. Support & Service Maintenance: • Installation And Training: Comprehensive Installation Services, Followed By Operator And Technical Training To Ensure Proper Use And Maintenance Of The Machine. • Warranty And Maintenance: Access To Technical Support For Any Malfunction Or Issues Within The Warranty Period. Local Spare Parts Availability Ensures Minimal Downtime. • Manuals: Detailed Operator And Technical Manuals Are Provided For Ease Of Reference. Item 12. Paging System & Telephone System (1 Set) • Line Transfer Capability: Supports Transfer From 8 Trunk Lines To 24 Local Lines. • Display: Backlit Lcd Screen For Easy Readability In Various Lighting Conditions. • Audio Features: Hands-free Operation With Full Duplex Functionality For Clear Communication. • Headset Support: Includes Optional Support For Electronic Hook Switch (ehs) Headsets. • Navigation: Features A Cursor And Directory Dial Key For Easy Navigation Through Contacts. • Network Compatibility: Supports 10/100/1g Ethernet For Reliable And High-speed Communication. • Power Options: Power Over Ethernet (poe) Support Or Optional External Power Adapter. • Voip Security: End-to-end Voip Encryption To Secure All Communications. • Mounting: Wall-mountable Design For Space-saving And Flexible Installation. Support/service Maintenance: • Installation & Training: Comprehensive Installation And User Training Provided To Ensure Optimal System Usage. • Warranty Support: Accessible Support For Troubleshooting And Resolving Technical Issues Within The Warranty Period. • Spare Parts Availability: Local Availability Of Replacement Parts To Minimize Downtime. • Service Personnel: On-site Service Personnel Available Within The Warranty Period For Repairs And Technical Assistance. • Documentation: Detailed Operator And Technical Manuals Included For Ease Of Use And Reference. Item 13. Manpower Pooling, Trainings & Seminars (1 Set) • Staff Hiring: Professional Staff Recruitment Services For Laboratory, Dialysis, And Other Essential Healthcare Roles. • Training Programs: O Laboratory & Dialysis Staff: Full-course Certified Training Program Tailored For Laboratory And Dialysis Personnel, Including Meal Allowances And Accommodation. O Diagnostic Staff: Comprehensive Training For Diagnostic Technicians With Certification, Including Meal Allowances And Accommodation. O Administrative Personnel: Full-course Certified Training Program For Administrative Staff, With Meal Allowances And Accommodation. O Nurses: Full-course Certified Training Program For Nurses, Including Meal Allowances And Accommodation. O Technicians: Certified Technical Training For Medical Equipment Technicians, With Meal Allowances And Accommodation. O Physicians: Full-course Certified Training For Physicians, With Meal Allowances And Accommodation. Each Training Program Is Designed To Ensure Professional Certification And Enhance The Skills Of Healthcare Staff, While Also Providing Full Support For Meals And Accommodation To Ensure A Seamless Learning Experience. Item 14: Fully Automated Clinical Chemistry Machine (1 Set) 1. Overall Performance • Analysis Method: End-point, Fixed-time, Rate, Two-point, Turbidimetry • Certifications: Ce, Fda, Iso 9001, Iso 14001, Iso 13485 2. Sample & Reagent System • Sample Positions: 90 Sample Positions, With Built-in Barcode System For Sample Identification. • Reagent Positions: 180 Refrigerated Reagent Positions (r1: 90 & R2: 90). • Sample Volume: 1-70 Μl. • Reagent Volume: 10-350 Μl. • Probe Washing: Automatic Washing Of Both Interior And Exterior. • Reagent Cooling: Maintained At 2–8°c For Optimal Reagent Preservation. 3. Reaction System • Temperature Control: 37±0.1°c, With Real-time Monitoring For Precise Control. • Cuvettes: 120 Reusable Cuvettes With An Optical Length Of 6mm. • Mixer Probe: Independent Stirring To Ensure Uniform Sample Mixing. • Cuvette Washing: Automatic Cuvette Washing For Continuous, High-performance Operation. • Stat Function: Yes, For Urgent Testing Requests. 4. Optical System • Light Source: 12v/20w Halogen Lamp For Reliable Illumination. • Spectrophotometry: Post-spectral Spectrophotometry For Accurate Measurements. • Wavelength Range: 340, 405, 450, 480, 505, 546, 570, 600, 630, 700, 750, 800 Nm. • Absorbance Range: 0 ~ 3.5 Abs For A Wide Range Of Assays. 5. Calibration & Quality Control • Calibration: 1-point, 2-point, And Multipoint Calibration; Includes Factor, Spline Logit-4p, And Logit-5p Options. • Quality Control: Random Insertion Of Quality Control Samples For Consistent Accuracy And Reliability. 6. Data Management • Software Compatibility: Runs On Windows 7/8/10 For Ease Of Integration. • Lis System: Laboratory Information System (lis) Integration Available. • Interface: Lan Port Access For Network Connectivity. • Printer: External Printer With Multiple Reporting Modes. 7. Working Conditions • Power Supply: Ac 220v ±10%, 50/60hz, 110v ±10%, 60hz, 800w. • Operating Temperature: 15°c To 30°c For Optimal Performance. • Water Consumption: Deionized Water At A Rate Of 20l/h. Humidity: 40% ~ 85% Relative Humidity. Support And Service Maintenance • Installation And Training: Comprehensive Installation And Operator Training Upon Delivery. • Warranty Support: Access To Address Malfunctions Or Technical Problems During The Warranty Period. • Spare Parts Availability: Local Availability Of Spare Parts For Efficient Repair And Maintenance. • Service Personnel Availability: Access To Trained Service Personnel Within The Warranty Period. • Documentation: Complete Operator And Technical Manuals Included For Troubleshooting And Operation. + Item 15: Hematology Machine – 5 Parts (1 Set) Key Features: • Lcd Touch Screen: A High-resolution Touch Screen For Easy Operation And Clear Display Of Results. • Throughput Of 60 Samples/hour: Capable Of Processing 60 Samples Per Hour, Offering Both Manual And Auto-calibration Options For Convenience. • Open Sampling Mode: The System Operates In An Open Mode, With An Integrated Barcode Scanner For Sample Identification And Traceability. • Built-in Thermal Printer: Prints Test Results Directly, Providing A Physical Copy Of Reports As Needed. • User-friendly Software: Stores Up To 60,000 Test Results, Including Histograms And Scattergrams, For Easy Data Retrieval And Review. Throughput: • 60 Tests/hour (both Manual And Automatic Modes) Assay Parameters: • 5 Parts: Includes Essential Hematology Tests And A Broad Range Of Parameters. • 25 Parameters: Comprehensive Test Panel Covering Wbc, Rbc, Hgb, Hct, Mcv, Mch, Mchc, Rdw-sd, Rdw-cv, Plt, Pdw, Mpv, Pct, P-lcr, P-lcc, Neu#, Neu%, Lym#, Lym%, Mon#, Mon%, Eos#, Eos%, Bas#, Bas%. • 2 Histograms & 4 Scattergrams: Provides Detailed Analysis For Both White Blood Cell (wbc) Differentiation And Blood Cell Morphology. Analytical Principles: • Tri-angle Laser Scattering: For Wbc Differentiation And Counting. • Flow Cytometry: For Accurate Wbc Differentiation. • Impedance: For Rbc And Plt Counting. • Cyanide-free Method: For Hemoglobin (hgb) Measurement. Sample Volume: • Cbc+diff Mode: 20 Μl. • Prediluted Mode: 20 Μl. Calibration: • Manual And Auto-calibration: Ensures Accuracy And Reliability Of Test Results. Storage: • 60,000 Sample Results: Includes Histograms And Scattergrams For Efficient Data Storage And Retrieval. Interface & Connectivity: • 4 Usb Ports: For Easy Connection To External Devices. • 1 Lan Port: For Network Connectivity. • Hl7 Protocol: Supports Integration With Laboratory Information Systems (lis). Item 16. Immunoassay Poct Machine (1 Set) A Compact, Reliable, And High-performance Immunoassay Machine Designed For Point-of-care Testing (poct). Ideal For Rapid Diagnostics, It Ensures High Accuracy And Supports Real-time Testing With Comprehensive Testing Capabilities. Simple Operation And High Throughput Make It Suitable For Various Healthcare Settings, Including Clinics, Hospitals, And Laboratories. Key Features: • Compact And Reliable: Designed For Space Efficiency And Dependable Operation In Busy Environments. • High Accuracy: Equipped With Available Controls And Calibrators To Ensure Precise Results. • Real-time Testing: Provides Immediate Test Results, Enabling Quick Decision-making. • Simple Operation: User-friendly Interface For Ease Of Use By Healthcare Professionals. • Comprehensive Testing Items: Supports A Wide Range Of Tests, Covering Multiple Aspects Of Patient Health. • High Throughput: Capable Of Processing Large Numbers Of Tests Quickly, Supporting Efficient Workflows. Complete Parameters: • Thyroid Function • Hormones • Cardiac Markers • Inflammation Detection • Renal Function • Digestive Function • Tumor Markers • Allergies • Infectious Diseases • Hba1c, And More. ________________________________________ Support/service Maintenance: • Installation And Training: Professional Installation And Operator Training To Ensure Proper Setup And Usage. • Technical Support: Access To Technical Support For Addressing Malfunctions Or Issues Within The Warranty Period. • Spare Parts Availability: Locally Available Spare Parts To Minimize Downtime. • Service Personnel Availability: On-site Service Personnel Within The Warranty Period For Prompt Support. • Operator And Technical Manuals: Comprehensive Manuals For Operators And Technical Staff To Facilitate Proper Machine Operation And Troubleshooting. Item 17: Urine Analyzer (1 Set) The Urine Analyzer Is A State-of-the-art, Multi-function, Fully Automatic, And Fast Benchtop Diagnostic Unit Designed For Accurate Urine Analysis. Integrating Advanced Technology With A Photoelectric Colorimetric Measurement Principle, It Ensures Precise Results Across A Range Of Important Urine Components. This Analyzer Is Equipped With A User-friendly Touch Screen Display, Built-in Thermal Printer For Easy Result Documentation, And An Rs232 Interface For Seamless Data Integration. It Offers Storage For Up To 20,000 Test Results, Making It An Ideal Solution For High-throughput Environments. Key Features: • Measurement Principle: Photoelectric Colorimetric Method For Precise Detection. • Components Tested: O Urobilinogen (ubg) O Bilirubin (bil) O Ketone Body (ket) O Occult Blood (bld) O Protein (pro) O Nitrite (nit) O Leukocyte (leu) O Glucose (glu) O Specific Gravity (sg) O Power Of Hydrogen (ph) O Vitamin C (vc) O Microalbumin (mal) O Creatinine (crf) O Calcium Ion (cal) • Display: 7-inch Touch Screen For Intuitive Operation. • Printer: Built-in Thermal Printer For Automatic Printouts Of Test Results. • Connectivity: Rs232 Interface For Data Export And Integration With Lab Systems. • Storage Capacity: Up To 20,000 Test Results For Easy Data Management. Support And Service Maintenance: • Installation & Training: Comprehensive Installation Service And Operator Training To Ensure Quick And Efficient Use. • Warranty Support: Timely Response To Address Any Malfunctions Or Technical Issues Within The Warranty Period. • Local Spare Parts Availability: Ready Access To Essential Spare Parts Locally For Quick Replacements And Minimal Downtime. • Service Personnel: Qualified Service Personnel Available During The Warranty Period To Provide On-site Support. • Documentation: Complete Operator And Technical Manuals Included For Easy Reference. The Urine Analyzer Is A Reliable And Efficient Solution For Laboratories, Clinics, And Healthcare Facilities Seeking Fast, Accurate, And Comprehensive Urine Testing. Item 18: Electrolytes Machine (1 Set) Sample Types: • Serum, Plasma, Whole Blood, Cerebrospinal Fluid, Dilute Urine Measuring Speed: • ≤ 25 Seconds Per Test Analysis Method: • Ion Selective Electrode (ise) Sample Volume: • 60–150 Μl • 200 Μl Sample Capacity: • 30 Sample Positions • 5 Emergency Sample Positions (only For Bke-b/d/f/l Models) Injection Mode: • Manual Or Automatic Injection (only For Bke-b/d/f/l Models) • Manual Injection (for Bke-a/c/e Models) Data Storage: • Up To 50,000 Test Results Printer: • Built-in Thermal Printer Interface: • Rs232 Port For Laboratory Information System (lis) Connectivity Display: • 7-inch High-definition Touch Screen Languages Supported: • Chinese And English (other Languages Can Be Customized) Calibration: • Automatic And Manual Calibration Options Additional Features: • Sample Volume Detection Power Supply: • Ac 110–240v, 50/60hz, 70va Operating Conditions: • Temperature: +10°c To +40°c • Relative Humidity: ≤ 80% • Atmospheric Pressure: 86–106 Kpa ________________________________________ Support & Service Maintenance • Installation And Training: Comprehensive Setup And User Training Are Provided. • Technical Support: Access To Support For Any Malfunction Or Technical Issue Within The Warranty Period. • Spare Parts Availability: Spare Parts Are Readily Available Locally. • Service Personnel Availability: Service Technicians Are Available Within The Warranty Period. • Manuals: Operator And Technical Manuals Are Included For Ease Of Use And Maintenance. Item 19: Ecg Machine (3/6 Channels) (1 Set) Specifications/details: • Display: Touch Screen With Led Backlight For Clear And Easy Viewing. • Technology: Digital Isolation Technology And Advanced Signal Processing With Digital Filters For Accurate Readings. • Patient Management: Supports Storing Patient Details Such As Name, Age, And Id For Streamlined Record-keeping. • Analysis Report: Generates Detailed Analysis Reports For Each Ecg Reading. • Multi-language Support: Available In German, French, Italian, And Turkish For Diverse User Needs. • Power Supply: Built-in Lithium Rechargeable Battery For Portability. • Printing: Features A Wide Thermal Printing System For Clear, Fast Results. • Connectivity: Equipped With Usb And Lan Sockets For Easy Data Transfer And Connectivity. • Memory: Built-in Memory Or Mini Sd Card Capable Of Storing Over 1,000 Archived Ecg Readings For Long-term Record Storage. • Automatic Features: Auto-measurement, Auto-analysis, And Auto-interpretation For Ease Of Use And Efficient Operation. ________________________________________ Technical Features: • Leads: Standard 12-lead Configuration For Comprehensive Ecg Analysis. • Patient Leakage Current: Less Than 10 Micro Amps For Enhanced Patient Safety. • Input Impedance: ≥50 Mω To Ensure Minimal Interference And Accurate Signal Capture. • Frequency Response: 0.05 ~ 150 Hz (-3db) For Clear Capture Of Heart Rhythms Across A Broad Spectrum. • Time Constant: >3.2 Seconds For Accurate And Stable Measurement Over Time. • Common Mode Rejection Ratio (cmrr): >100 Db To Minimize Noise And Improve Signal Clarity. • Recording Paper Dimensions: 110 Mm X 20 M For Long-lasting, High-quality Printouts. • Paper Speed Options: 25 Mm/s And 50 Mm/s, Adjustable Depending On Diagnostic Needs. • Sensitivity Choice: 5, 10, Or 20 Mm/mv For Flexible And Accurate Signal Interpretation. • Measurement Parameters: Includes Heart Rate (hr), P-r Interval, P-duration, Qrs Duration, Q-t Interval, Qtc, P Axis, Qrs Axis, T Axis, R(v5), S(v1), R(v5) + S(v1) For Comprehensive Ecg Analysis. • Product Safety: Class I, Cf Type With Defibrillation And Pacing Protection To Ensure Patient Safety During Use. • Enduring Polarization Voltage: ±300 Mv For Robust, Reliable Readings. • Noise Level: Less Than 15 Μvp-p To Ensure Low Interference During Ecg Measurement. • Dimensions: 130 Mm (l) X 74 Mm (w) X 25 Mm (h), Compact And Portable Design. • Net Weight: 2.3 Kg, Lightweight For Easy Transport And Handling. • Memory: Can Store More Than 1,000 Archived Ecg Readings On Built-in Or Mini Sd Card For Data Management. • Cmrr (continued): >100 Db For Superior Noise Rejection In Various Environments. ________________________________________ Support/service Maintenance: • Installation And Training: Professional Installation And Training Services To Ensure Proper Setup And Effective Use. • Technical Support: Accessibility To Address Any Malfunctions Or Technical Issues Within The Warranty Period. • Spare Parts Availability: Spare Parts Available Locally For Quick Repairs And Minimal Downtime. • Service Personnel: Availability Of Trained Service Personnel During The Warranty Period For Maintenance And Troubleshooting. • Documentation: Includes Operator And Technical Manuals For Easy Reference And Support. Item 20: Digital X-ray System (1 Set) Features: • Rich Dr Upgrade Reserve Interface: Future-proof Design With Easy Upgrades To Dr Systems. • Fault Self-diagnosis And Protection: Intelligent Monitoring For System Faults And Automatic Protection To Prevent Damage. • Automatic Tube Current Calibration: Ensures Precise And Consistent Imaging Performance. • X-ray Tube With Filament Dormancy Function: Energy-saving Feature To Extend The Lifespan Of The X-ray Tube. • Aec (automatic Exposure Control): Supports Multiple Ionization Chambers For Optimal Exposure Settings. • Analog-digital Dual-loop Control: Simplified Operation With Advanced Intelligent Features For Enhanced Performance. • High Kv, High Current, High Power: Exceptional Penetration Capability, Ideal For Imaging Obese Patients With Ease. Technical Specifications: • X-ray Generator (including Console) O Output Power: 32 Kw O Power Voltage: 220v ± 22v O Kv Range: 40 ~ 125 Kv O Ma Range: 32 ~ 400 Ma O Mas Range: 0.32 ~ 400 Mas O Exposure Time: 0.002 ~ 6.3 S • X-ray Tube: O Anode Heat Storage Capacity: 240 Khu O Small Focus: 0.6 Mm O Large Focus: 1.2 Mm O Anode Speed: 3000 R/min • Collimator: O Inherent Filtration: 1.0 Mm Al @ 75 Kv O Light Source: Led • Radiographic Table: O Table Size: 2100 Mm X 800 Mm X 650 Mm O Bucky Size: 18 X 18 Inch O Table Longitudinal Movement: ≥ 900 Mm O Cassette Movement Distance: ≥ 500 Mm • Vertical Chest Stand: O Vertical Movement Range: ≥ 1200 Mm O Bucky Size: 18 X 18 Inch • Double Grid: O Size: 18 X 18 Inch O Ratio: 1:1 O F.d. (focus To Detector Distance): 100 Cm O Grid Density: 40 L/cm Support & Service Maintenance: • Installation & Training: Comprehensive Setup And Hands-on Training For Users. • Technical Support: Quick Response To Address Any Malfunctions Or Technical Issues Within The Warranty Period. • Spare Parts Availability: Locally Sourced Spare Parts To Ensure Minimal Downtime. • Service Personnel Availability: Qualified Technicians Available For Support Within The Warranty Period. • Documentation: Complete Operator And Technical Manuals Provided For Easy Reference And Troubleshooting. Item 21: Ultrasound Machine (1 Set) Overview: This Advanced Ultrasound Machine Is Powered By An Artificial Intelligence (ai)-based Platform That Integrates Deep Learning Algorithms Designed To Evolve And Adapt Similarly To The Human Brain. This Cutting-edge Platform Continuously Learns From The Data It Processes, Ensuring That Image Interpretation And Diagnostic Accuracy Improve Over Time. It Provides A Seamless, Intelligent Imaging Experience That Enhances Workflow Efficiency, Simplifies Procedures, And Elevates Diagnostic Confidence. Key Features: Ai-enhanced Imaging For Optimal Results: • Artificial Intelligence-based Ultrasound Platform: Utilizes Deep-learning Algorithms To Actively Analyze And Adapt To Ultrasound Images In Real-time. This Results In Faster, More Accurate Exams With Fewer Errors, Delivering A Superior Diagnostic Experience. • Enhanced Workflow Efficiency: The Intelligent Platform Allows For Smoother, Faster Procedures, Helping Medical Professionals Maintain High Productivity Levels While Delivering Consistent, High-quality Imaging Results. S-fetus: Automating Obstetric Ultrasound Workflow: • One-touch Functionality: The S-fetus Feature Simplifies The Obstetric Ultrasound Process By Automatically Selecting The Best Section Images And Performing The Necessary Fetal Measurements With Just One Touch. This Reduces The Workload On Clinicians And Ensures Accuracy With Minimal Effort. • Fetal Growth And Development Monitoring: Automates Key Measurements Required To Monitor Fetal Growth And Development, Improving Consistency, Speed, And Accuracy In Obstetric Exams. The Result Is A More Reliable, Efficient Experience For Both Patients And Practitioners. Micro F: Advanced Visualization For Blood Flow Dynamics: • Novel Doppler Technology: This Unique Ultrasound Technique Allows For The Visualization Of Minute Vessels And The Detection Of Slow Blood Flow With High Sensitivity. • Contrast-free Evaluation: It Eliminates The Need For Contrast Agents, Providing An Advanced Hemodynamic Evaluation With Improved Spatial Resolution, Reduced Motion Artifacts, And Enhanced Image Quality. This Capability Ensures Effective Diagnostic Performance, Even During Busy Clinical Schedules. Smart 3d/4d Imaging: • High-density Volume Rendering Engine: The Machine's Cutting-edge 3d/4d Imaging Engine Optimizes Signal Processing To Deliver Superior Volumetric Performance. It Produces Exceptional Image Quality With Realistic Detail And High-volume Rates That Are Unmatched By Traditional Systems. • Streamlined Workflow: The Advanced Imaging Suite Significantly Extends Diagnostic Capabilities, Providing High-quality 3d/4d Imaging While Maintaining A Simplified Workflow For The Operator. This Feature Sets A New Standard For Ultrasound Performance In Clinical Environments. Contrast-enhanced Ultrasound Performance: • Dynamic Acoustic Control Technology: The System's Innovative Dynamic Acoustic Control Technology Regulates The Acoustic Pressure Of Contrast Agents, Improving Lesion Visualization And Extending The Duration Of The Contrast Effect. • Perfusion Dynamics Assessment: The System Offers Advanced Quantification Capabilities, Enabling Precise Assessment Of Perfusion Dynamics In A Variety Of Clinical Settings Without The Need For External Contrast Agents. This Enhances Lesion Detection And Overall Diagnostic Accuracy. Support & Service Maintenance: • Installation And Training: On-site Installation And Comprehensive Operator Training To Ensure A Smooth Transition And Full System Utilization. • Technical Support During Warranty: Accessibility To Address Any Malfunctions Or Technical Issues That May Arise Within The Warranty Period. • Spare Parts Availability: Local Availability Of Essential Spare Parts To Ensure Minimal Downtime In Case Of Technical Issues. • Service Personnel Availability: Access To Trained Service Technicians During The Warranty Period For Prompt Resolution Of Any Technical Problems. • Operator And Technical Manuals: Detailed Manuals Provided For Both Operators And Technical Personnel, Ensuring Proper Usage And Maintenance Of The Ultrasound System. Inclusions: • All Needs For Complete Set Up Of Diagnostic Laboratory Based On Doh Assessment Tool • All Needs For Complete Set Up Of Dialysis Center Based On Doh Assessment Tool • 15 Years Operational Assistance & Management With Complete Operation Manuals • Interior Design Of Dialysis & Diagnostic Area • Accounting System • Philhealth Claims & Software • Furniture & Fixtures • Advertising & Signages • Training On The Operation Of All Medical Equipment And Apparatus • Training For Personnel In The Operation And Logistical Support Functions • Doh-accredited Training For 4 Hemodialysis Nurses (3- Months) • Doh-accredited Training For 2 Dialysis Technicians (3- Months) • Training For Philhealth & Admin Officer (2- Months) • Laboratory Technical Procedures And Guidelines Necessary For Doh Approval • Licenses & Other Legalities Needed • 10 Air-conditioning Units • 2 Refrigerators • 2 Water Dispensers • 1 Television Set • 1 Automatic Washing Machine • 2 Wall Fans Generator 75 Kva Diesel Genset With Ats400 (1 Set) Description: • One (1) Unit: Brand New, Silent-type Generating Set Powered By A 6-cylinder, 4-stroke Cycle, Water-cooled, Turbocharged Engine. • Output: The Generator Is Directly Coupled To A Heavy-duty Brushless Alternator. O Frequency: 60 Hz O Voltage: 230 V O Speed: 1800 Rpm O Controller: Digital Electronic Controller With Standard Attachments And Accessories. • Automatic Transfer Switch (ats): O One (1) Unit: Automatic Transfer Switch, 400 Amperes, Breaker Type. O Voltage: 230 V, 3 Poles O Mounting: Wall-mounted Type O Operation: Electrically And/or Manually Operated With Interlocking Protection. O Control: Conventional Controller With Relays And Timer Located At The Door Side. O Cabinet: Powder-coated Indoor Type With Extended Dimensions For Easy Installation And Servicing. Key Features: • Time Delay, Normal To Emergency (adjustable Setting) • Time Delay, Emergency To Normal (adjustable Setting) • Time Delay For Engine Cool Down • Voltage Sensing Relay (over/under Voltage) • Selector Switch For Auto/manual/test Gen • Pilot Lights For Normal And Emergency Conditions Support/service & Maintenance: • Installation & Training: Complete Setup And User Training. • Post-warranty Support: Access To Address Any Malfunctions Or Technical Issues Within The Warranty Period. • Spare Parts Availability: Locally Available Spare Parts. • Service Personnel: Availability Of Qualified Technicians During The Warranty Period. • Manuals: Comprehensive Operator And Technical Manuals. Cctv – 16 Channels (1 Set) Key Specifications: • Colour Type: True Day / Night • Resolution: 3 Mp (2052 X 1536 Tvl) • Digital Signal Processing (dsp): Yes • Low-light Sensitivity: 0.01 Lux • Voltage: 12 V Dc • Power Consumption: 5 W • Focal Length: 2.8 ~ 6 Mm • Back Light Compensation: Yes • Auto Gain Control: Yes • White Balance: Yes • Electronic Shutter Range: 1/25 (1/30) S To 1/50,000 S • Synchronization: Internal Physical Specifications: • Dimensions: 87 X 82 X 226 Mm • Weight: 680 G Environmental Specifications: • Operating Temperature: -40°c ~ +60°c (-40°f ~ +140°f) • Protection Rating: Ip66 (weatherproof) • Operating Humidity: <90% Additional Features: • 3 Megapixel High-performance Cmos Sensor • Analogue Hd Output: Supports Up To 3mp Resolution • True Day/night Functionality • Osd (on-screen Display) Menu • Dnr (digital Noise Reduction) • Smart Ir Technology: Ir Distance Up To 20m/40m/80m Depending On Model • Exir Technology: Enhanced Infrared Performance For Better Night Vision Support/service & Maintenance: • Installation & Training: Full Installation And Training For Operators. • Post-warranty Support: Access To Address Any Malfunctions Or Technical Issues During The Warranty Period. • Spare Parts Availability: Locally Available Spare Parts. • Service Personnel: Qualified Service Personnel Available During The Warranty Period. • Manuals: Detailed Operator And Technical Manuals.

Details: The subject of the contract is the modernization of the Bílovec Tourist Information Center. The Tourist Information Center (hereinafter referred to as Tic) is located on the ground floor of the Registered Cultural Monument, Museum Building, in the Center of the City Monument Zone of Bílovec. The main goal of the project is to reconstruct and modernize the existing Tic and thereby increase the user comfort of visitors to the branch. The subject of the implementation is also the change of the image of the branch with an emphasis on the regional product of the Destination Management of the Moravian-Silesian Region – Technotrasa. A detailed description of the subject of the contract is given in the Project Documentation "interior of the Tourist Information Center Bílovec, According to Iti Requirements", Ing.arch. Markéta Vyslužilová, Tyršova 1761/14, 702 00 Moravská Ostrava, Ič 73088072, Date February 2023 (hereinafter referred to as "Project Documentation"). The Project Documentation forms Annex No. 3 of this Call. Annex No. 3 also includes lists of construction works used to determine the bid price. The Above-mentioned Project Documentation is a Comprehensive Project Documentation Addressing the Modernization of the Tourist Information Center Not Only From the Point of View of Construction Works, But Also of Furniture Delivery. However, Part of this Public Contract Is Only and Only the Execution of Construction Works and Electricity within the Framework of the Following Construction Objects: - Ancillary and Other Costs - Architectural and Construction Solutions Except: O T03 Typical Interior Equipment O T04 Atypical Interior Equipment - High Current - Low Current Supply of Typical and Atypical Interior equipment will be part of a separate procurement process. Participants Will Not Price Items Within Parts T03 AND T04 Within Construction Budget Lists! The client points out that the execution of the painting must be carried out by a company specializing in the restoration of cultural monuments and in accordance with the requirements of the Npú, the shades will be determined according to the swatch on the construction site before the start of work.

Details: Description Philippine Bidding Documents Supply & Delivery Of Medicines & Medical Supplies For Cy 2025 (early Procurement Activity) Sixth Edition November 2024 Table Of Contents Glossary Of Acronyms, Terms, And Abbreviations ………………………….3 Section I. Invitation To Bid……………………………………………………..6 Section Ii. Instructions To Bidders…………………………………………...9 1. Scope Of Bid ………………………………………………………………………. 10 2. Funding Information………………………………………………………………. 10 3. Bidding Requirements ……………………………………………………………. 10 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 10 5. Eligible Bidders…………………………………………………………………… 10 6. Origin Of Goods ………………………………………………………………….. 11 7. Subcontracts ……………………………………………………………………… 11 8. Pre-bid Conference ………………………………………………………………. 11 9. Clarification And Amendment Of Bidding Documents …………………………… 11 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 11 11. Documents Comprising The Bid: Financial Component …………………………... 12 12. Bid Prices …………………………………………………………………………. 12 13. Bid And Payment Currencies ……………………………………………… 13 14. Bid Security ………………………………………………………………………. 13 15. Sealing And Marking Of Bids ……………………………………………………… 13 16. Deadline For Submission Of Bids …………………………………………………. 13 17. Opening And Preliminary Examination Of Bids ………………………………….. 13 18. Domestic Preference ……………………………………………………………… 14 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 14 20. Post-qualification ………………………………………………………………… 14 21. Signing Of The Contract …………………………………………………………… 15 Section Iii. Bid Data Sheet …………………………………………………..16 Section Iv. General Conditions Of Contract ……………………...………..18 1. Scope Of Contract ………………………………………………………………… 19 2. Advance Payment And Terms Of Payment ……………………………………….. 19 3. Performance Security ……………………………………………………………. 19 4. Inspection And Tests ……………………………………………………………… 19 5. Warranty …………………………………………………………………………. 19 6. Liability Of The Supplier ………………………………………………………….. 20 Section V. Special Conditions Of Contract ………………………………….21 Section Vi. Schedule Of Requirements ……………………………………....26 Section Vii. Technical Specifications …………………………………………37 Section Viii. Checklist Of Technical And Financial Documents …………..48 Glossary Of Acronyms, Terms, And Abbreviations Abc – Approved Budget For The Contract. Bac – Bids And Awards Committee. Bid – A Signed Offer Or Proposal To Undertake A Contract Submitted By A Bidder In Response To And In Consonance With The Requirements Of The Bidding Documents. Also Referred To As Proposal And Tender. (2016 Revised Irr, Section 5[c]) Bidder – Refers To A Contractor, Manufacturer, Supplier, Distributor And/or Consultant Who Submits A Bid In Response To The Requirements Of The Bidding Documents. (2016 Revised Irr, Section 5[d]) Bidding Documents – The Documents Issued By The Procuring Entity As The Bases For Bids, Furnishing All Information Necessary For A Prospective Bidder To Prepare A Bid For The Goods, Infrastructure Projects, And/or Consulting Services Required By The Procuring Entity. (2016 Revised Irr, Section 5[e]) Bir – Bureau Of Internal Revenue. Bsp – Bangko Sentral Ng Pilipinas. Consulting Services – Refer To Services For Infrastructure Projects And Other Types Of Projects Or Activities Of The Gop Requiring Adequate External Technical And Professional Expertise That Are Beyond The Capability And/or Capacity Of The Gop To Undertake Such As, But Not Limited To: (i) Advisory And Review Services; (ii) Pre-investment Or Feasibility Studies; (iii) Design; (iv) Construction Supervision; (v) Management And Related Services; And (vi) Other Technical Services Or Special Studies. (2016 Revised Irr, Section 5[i]) Cda - Cooperative Development Authority. Contract – Refers To The Agreement Entered Into Between The Procuring Entity And The Supplier Or Manufacturer Or Distributor Or Service Provider For Procurement Of Goods And Services; Contractor For Procurement Of Infrastructure Projects; Or Consultant Or Consulting Firm For Procurement Of Consulting Services; As The Case May Be, As Recorded In The Contract Form Signed By The Parties, Including All Attachments And Appendices Thereto And All Documents Incorporated By Reference Therein. Cif – Cost Insurance And Freight. Cip – Carriage And Insurance Paid. Cpi – Consumer Price Index. Ddp – Refers To The Quoted Price Of The Goods, Which Means “delivered Duty Paid.” Dti – Department Of Trade And Industry. Exw – Ex Works. Fca – “free Carrier” Shipping Point. Fob – “free On Board” Shipping Point. Foreign-funded Procurement Or Foreign-assisted Project– Refers To Procurement Whose Funding Source Is From A Foreign Government, Foreign Or International Financing Institution As Specified In The Treaty Or International Or Executive Agreement. (2016 Revised Irr, Section 5[b]). Framework Agreement – Refers To A Written Agreement Between A Procuring Entity And A Supplier Or Service Provider That Identifies The Terms And Conditions, Under Which Specific Purchases, Otherwise Known As “call-offs,” Are Made For The Duration Of The Agreement. It Is In The Nature Of An Option Contract Between The Procuring Entity And The Bidder(s) Granting The Procuring Entity The Option To Either Place An Order For Any Of The Goods Or Services Identified In The Framework Agreement List Or Not Buy At All, Within A Minimum Period Of One (1) Year To A Maximum Period Of Three (3) Years. (gppb Resolution No. 27-2019) Gfi – Government Financial Institution. Gocc – Government-owned And/or –controlled Corporation. Goods – Refer To All Items, Supplies, Materials And General Support Services, Except Consulting Services And Infrastructure Projects, Which May Be Needed In The Transaction Of Public Businesses Or In The Pursuit Of Any Government Undertaking, Project Or Activity, Whether In The Nature Of Equipment, Furniture, Stationery, Materials For Construction, Or Personal Property Of Any Kind, Including Non-personal Or Contractual Services Such As The Repair And Maintenance Of Equipment And Furniture, As Well As Trucking, Hauling, Janitorial, Security, And Related Or Analogous Services, As Well As Procurement Of Materials And Supplies Provided By The Procuring Entity For Such Services. The Term “related” Or “analogous Services” Shall Include, But Is Not Limited To, Lease Or Purchase Of Office Space, Media Advertisements, Health Maintenance Services, And Other Services Essential To The Operation Of The Procuring Entity. (2016 Revised Irr, Section 5[r]) Gop – Government Of The Philippines. Gppb – Government Procurement Policy Board. Incoterms – International Commercial Terms. Infrastructure Projects – Include The Construction, Improvement, Rehabilitation, Demolition, Repair, Restoration Or Maintenance Of Roads And Bridges, Railways, Airports, Seaports, Communication Facilities, Civil Works Components Of Information Technology Projects, Irrigation, Flood Control And Drainage, Water Supply, Sanitation, Sewerage And Solid Waste Management Systems, Shore Protection, Energy/power And Electrification Facilities, National Buildings, School Buildings, Hospital Buildings, And Other Related Construction Projects Of The Government. Also Referred To As Civil Works Or Works. (2016 Revised Irr, Section 5[u]) Lgus – Local Government Units. Nfcc – Net Financial Contracting Capacity. Nga – National Government Agency. Philgeps - Philippine Government Electronic Procurement System. Procurement Project – Refers To A Specific Or Identified Procurement Covering Goods, Infrastructure Project Or Consulting Services. A Procurement Project Shall Be Described, Detailed, And Scheduled In The Project Procurement Management Plan Prepared By The Agency Which Shall Be Consolidated In The Procuring Entity's Annual Procurement Plan. (gppb Circular No. 06-2019 Dated 17 July 2019) Psa – Philippine Statistics Authority. Sec – Securities And Exchange Commission. Slcc – Single Largest Completed Contract. Supplier – Refers To A Citizen, Or Any Corporate Body Or Commercial Company Duly Organized And Registered Under The Laws Where It Is Established, Habitually Established In Business And Engaged In The Manufacture Or Sale Of The Merchandise Or Performance Of The General Services Covered By His Bid. (item 3.8 Of Gppb Resolution No. 13-2019, Dated 23 May 2019). Supplier As Used In These Bidding Documents May Likewise Refer To A Distributor, Manufacturer, Contractor, Or Consultant. Un – United Nations. Section I. Invitation To Bid Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Invitation To Bid For The Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 1. The Leyte Regional Prison, Through National Expenditure Program (nep) F.y. 2025 Intends To Apply The Sum Of Lot 1 – Eleven Million Four Hundred Thirty-one Thousand Six Hundred Pesos & 60/100 (₱11,431,600.60) Being The Abc To Payments Under The Contract For Supply & Delivery Of Medicines With Identification Number Bid2024-03a, And Lot 2 – Five Hundred Five Thousand Seven Hundred Thirty-eight Pesos Only (₱505,738.00) Being The Abc To Payments Under The Contract For Supply & Delivery Of Medical Supplies With Identification Number Bid2024-03b. Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 2. The Leyte Regional Prison Now Invites Bids For The Early Procurement Activity (epa). Delivery Of The Goods Is Required Within February 1-28, 2025. Bidders Should Have Completed, Within The Last Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project Equivalent To At Least Twenty-five Percent (25%) Of The Abc. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Leyte Regional Prison – Bids And Awards Committee Office And Inspect The Bidding Documents At The Address Given Below During Monday To Friday From 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 15, 2024 8:00am - 5:00pm To December 9, 2023 8:00am – 8:55am From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty-five Thousand Pesos Only (₱25,000.00) For Lot 1, One Thousand Pesos Only (₱1,000.00) For Lot 2, And Twenty-five Thousand Pesos Only (₱25,000.00) For Lot 1&2. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees And Presented In Person. 6. The Leyte Regional Prison Will Hold A Pre-bid Conference On November 25, 2024 @ 9:00 Am At Lrp Administrative Building Conference Room Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before December 9, 2024 @ 8:55 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 9, 2024 @ 9:00 Am At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. Schedule Of The Bidding Activities Shall Be As Follows: Activites Date/time Venue 1. Sale And Issuance Of Bid Documents November 15, 2024 8:00am To 5:00pm To December 9, 2024 8:00am To 8:55am Office Of The Bac/bac Secretariat, Leyte Regional Prison, Abuyog, Leyte 2. Pre Bid Conference November 25, 2024 9:00 Am Conference Room, Admin Building, Lrp, Abuyog, Leyte 3. Submission And Opening Of Bid Documents December 9, 2024 9:00 Am Conference Room, Admin Building, Lrp, Abuyog, Leyte 10. The Lrp Bac Shall Use Non-discretionary And Non-discriminatory Measure Based On Sheer Luck As A Tie-breaking Tool (draw Lots) In The Event That Two Or More Bidders Were Declared As Lcrb In-order To Determine The Final Lcrb Based On The Following: I. In Alphabetical Order, The Bidder Shall Pick One Rolled Paper Ii. The Lucky Bidder Who Would Pick A Paper With “congratulations” Remark Shall Be Declared As The Final Lcrb And Recommended For The Award Of The Contract. 11. The Leyte Regional Prison Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: The Office Of The Bac Secretariat Leyte Regional Prison, Abuyog, Leyte Email: Lrpbac@bucor.gov.ph 13. You May Visit The Following Websites For Downloading Of Bidding Documents: Https://notices.philgeps.gov.ph/ Https://bucor.gov.ph/bid-announcements/ Date Of Issue: November 15, 2024 Mr. Tracy B. Soriano, Msca Bac Chairperson Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Leyte Regional Prison Wishes To Receive Bids For The Lot 1 – Supply & Delivery Of Medicines With Identification Number Bid2024-03a, And Lot 2 – Supply & Delivery Of Medical Supplies With Identification Number Bid2024-03b. The Procurement Project Supply & Delivery Of Medicines & Medical Supplies For Cy 2025 Is Composed Of Two (2) Lots, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For Fy 2025 In The Amount Of Lot 1 – Eleven Million Four Hundred Thirty-one Thousand Six Hundred Pesos & 60/100 (₱11,431,600.60), And Lot 2 – Five Hundred Five Thousand Seven Hundred Thirty-eight Pesos Only (₱505,738.00). A. The Source Of Funding Is Nga, The National Expenditure Program. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. Foreign Ownership Limited To Those Allowed Under The Rules May Participate In This Project. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To At Least Twenty-five Percent (25%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On November 25, 2024 @ 9:00 Am At Lrp Administrative Building Conference Room As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within The Last Two (2) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed The Bds. 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until April 8, 2025. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On December 9, 2024 @ 9:00 Am At Lrp Administrative Building Conference Room As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 14 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As One Project Having Several Items Grouped Into Several Lots, Which Shall Be Awarded As Separate Contracts Per Lot. 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification 20.1. Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Any Supply & Delivery Of Drugs, Medicines, Medical, Dental & Laboratory Supplies B. Completed Within The Last Two (2) Years Equivalent To At Least Twenty-five Percent (25%) Of The Abc, Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed 12 The Price Of The Goods Shall Be Quoted Ddp Leyte Regional Prison Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Five Percent (5%) Of Abc If Bid Security Is In Surety Bond. 15 Electronic Copy/electronic Submission Is Not Allowed Each Bidder Shall Submit One (1) Original Copy And Three (3) Photocopies Of The First And Second Components Of Its Bid. 19.4 One Project Having Several Items Grouped Into Several Lots, Which Shall Be Awarded As Separate Contracts Per Lot. 20.1 Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its; 1. Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) 2. Supporting Documents For The Slcc (sales Invoice Or Official Receipt Or End-users Acceptance) 3. Valid And Current Registration Certificate (sec Certificate Of Registration For Corporation Or Dti Certificate Of Registration For Sole Proprietorship Or Cda Certificate Of Registration For Cooperative) 4. Valid And Current Mayor’s Or Business Permit 5. Valid And Current Tax Clearance 6. Audited Financial Statement 7. Company’s License To Operate (lto) From Food And Drug Administration (fda) 8. Certificate Of Product Registration (cpr) From Fda 21.1 The Winning Bidder Shall Post The Required Performance Security And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 5.1 In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 5.2 The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi. Schedule Of Requirements. Upon Delivery Of The Goods To The Project Site, The Supplier Shall Notify The Procuring Entity And Present The Following Documents To The Procuring Entity: (i) Original And Four Copies Of The Supplier’s Invoice Showing Goods’ Description, Quantity, Unit Price, And Total Amount; (ii) Delivery Receipt Detailing Number And Description Of Items Received Signed By The Procuring Entity’s Representative At The Project Site; (iii)certificate Of Acceptance/inspection Report Signed By The Procuring Entity’s Representative At The Project Site; For Purposes Of The Contract, “exw (extra Work),” “fob (“free On Board” Shipping Point),” “fca (“free Carrier” Shipping Point),” “cif (cost Insurance And Freight.),” “cip (carriage And Insurance Paid),” “ddp (delivered Duty Paid)” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: The Delivery Terms Applicable To This Contract Are Ddp Delivered To Supply Office, Leyte Regional Prison, Abuyog, Leyte. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The Lrp Health And Welfare Services Section Chief As The End-user. All Medicines Must Be Delivered On Working Days And Not Later Than 1:00pm From February 1-28, 2025. All Items Not Covered By The Submitted Cpr Will Not Be Accepted. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions Any Relevant Hazchem Classifications A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Additional Requirements On Box Or Bottle, Blister Packs, Inhaler And Tube. The Following Is Legibly Imprinted Or Stamped In Any Color. Date Of Manufacture __________________ Date Of Expiry ___________________ Period Of Expiration – Expiry Date For The Following Should Be As Follows: A. Medicines Should Have At Least Eighteen (18) Months Shelf-life Upon Delivery And Ten (10) Months For Food Supplements. B. For Liquid Preparation: Expiration Date Should Not Be Less Than 18 Months From The Date Of Manufacture And Not Less Than 16 Months From The Date Of Delivery On Site. In Case The Expiration Of Medicines Delivered Is Lower Than That Provided For Above, The Supplier Shall Submit During The Delivery An Undertaking, That The Items Delivered Shall Be Replaced Three (3) Months Prior To The Expiry Date But With A Validity Date Of Not Less Than The Remainder Of The Warranty. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif (cost Insurance And Freight.), Cip (carriage And Insurance Paid), Or Ddp (delivered Duty Paid), Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif (cost Insurance And Freight.), Cip (carriage And Insurance Paid), Or Ddp (delivered Duty Paid), Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Intellectual Property Rights – The Supplier Shall Indemnify The Procuring Entity Against All Third-party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 2.1 Advance Payment Is Not Allowed 4 The Inspections And Tests That Will Be Conducted Are: Partial/complete Delivery Of Goods Shall Be Inspected By The Lrp Inspection And Acceptance Committee. Inspection And Acceptance Will Be Conducted By The Lrp Inspection And Acceptance Committee To The Actual Delivery At The Project Site (lrp). Goods With Defect Or Non-compliant With The Required Specifications As Stipulated In The Approved Purchase Order/technical Specifications Shall Be Rejected And Shall Be Replaced By The Supplier Free Of Cost To The Procuring Entity Within Seven (7) Calendar Days The Goods Shall Be Accepted By The End User After Passing The Inspection Of The Lrp Inspection And Acceptance Committee. The Inspections And Tests That Will Be Conducted Are; 1.) Upon Delivery, The Goods Shall Undergo Physical Inspection By The Lrp Inspection And Acceptance Committee Of The Procuring Entity To Ascertain The Physical Condition And Acceptability Of The Goods. 2.) Actual Counting Inspection To Determine The Quantity And Completeness Of The Medicines Delivered In Accordance To The Schedule Of Requirements Set In The Bidding Documents. 3.) Thorough Inspection On Medicines Registration Number, Generic Name, Brand Name, Dosage Strength, Dosage Form, Classification, Packaging, Manufacturer, Country Of Origin, Trader, Issuance Date, & Expiry Date Based On Submitted Cpr During The Post Qualification Process. In Case The Supplier Fails To Comply/non-responsive With Regards To Product Required Detailed Specifications, The Lrp Has The Right Not To Accept The Item/s. 4.) However, If The End User Requested For Purposes Of Laboratory Analysis A Random Samples Shall Be Selected By The End User Of Its Duly Authorized Representative And Witnessed By A Representative From Supplier. The Tests To Be Conducted By Fda (food And Drug Administration) And Sample Sizes Are As Follows: A) Physico-chemical Test I. Tablet/capsule – 1 Commercial Presentation (min Of 50 Pcs.) Ii. Liquid/suspension Solution – 60mlx6 Bottles; 120ml X 6 Bottles Iii. Granules/powders For Suspension – 30ml X 6 Bottles; 60ml X 6 Bottles B) Sterility Test I. Solid Preparations: Less Than 50mg Or More But 200mg Or More – Minimum Of 20 Bottles Ii. Liquid Preparations: 1ml To 100ml – Minimum Of 20 Bottles; 50ml To 1000ml- Minimum Of 6 Bottles C) Microbiological Test I. Tablet/capsule – Number Of Tablets/capsules Equivalent To At Least 20g Ii. Liquid Preparations – 500ml To 1000ml – Minimum Of 6 Bottles 3) The Supplier Shall Promptly Replace The Equivalent Quantity Of Goods Taken As Samples Without Cost To The Procuring Entity. 4) Pending Fda Analysis, Said Products Should Not Be Distributed To End-users Nor Shall It Be Used Such Time It Is Cleared By Fda Laboratory Testing. 5) If Fda Inspection Or Results Of Laboratory Analysis Show Major Violations, The Entire Delivery Shall Be Rejected And The Company Will Not Be Allowed To Participate In Any Future Procurement Activities Of The Agency. Section Vi. Schedule Of Requirements Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Lot 1 - Supply & Delivery Of Medicines: # Description Qty Dosage Form Delivery Schedule 1 Acetylcysteine 600mg Effervescent 2,000 Tablet February 1-28, 2025 2 Aloh Mgoh +simethicone 178mg/233mg/30mg 1,500 Tablet February 1-28, 2025 3 Ambroxol Hydrochloride 75mg 5,000 Capsule February 1-28, 2025 4 Amlodipine Besilate 10mg 10,000 Tablet February 1-28, 2025 5 Amoxicillin 500mg 1,500 Capsule February 1-28, 2025 6 Ascorbic Acid +zinc 25,000 Capsule February 1-28, 2025 7 Aspirin 80mg 1,000 Tablet February 1-28, 2025 8 Atorvastatin Calcium 40mg 5,490 Tablet February 1-28, 2025 9 Azithromycin 2,000 Tablet February 1-28, 2025 10 Bacillus Clausii 2 Billion Cfu/5ml 350 Mini Bot February 1-28, 2025 11 Betahistine 16mg 2,000 Tablet February 1-28, 2025 12 Bisacodyl 5mg 2,000 Tablet February 1-28, 2025 13 Butamirate Citrate 50mg 2,000 Tablet February 1-28, 2025 14 Carbocisteine 500mg 2,000 Capsule February 1-28, 2025 15 Cefalexin 500mg 2,000 Capsule February 1-28, 2025 16 Ceftriaxone Sodium 1gm Powder For Injection 50 Vial February 1-28, 2025 I/we Hereby Commit To Comply And Deliver All The Requirement In Accordance With The Above Stated Schedule. Conforme: Name Of Company In Print Signature Printed Name Of Authorized Representative Date Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Lot 1 - Supply & Delivery Of Medicines: # Description Qty Dosage Form Delivered, Weeks/months 17 Cefuroxime 500mg 1,000 Tablet February 1-28, 2025 18 Celecoxib 200mg 5,000 Capsule February 1-28, 2025 19 Ceterizine 10mg 15,000 Tablet February 1-28, 2025 20 Cinnarizine 25mg 2,000 Tablet February 1-28, 2025 21 Ciprofloxacin 500mg 1,500 Tablet February 1-28, 2025 22 Citicoline 500mg 1,000 Tablet February 1-28, 2025 23 Clopidogrel 75mg 3,000 Tablet February 1-28, 2025 24 Clotrimazole Cream (1%) 10mg/g 50 Tube February 1-28, 2025 25 Clozapine 100mg 350 Tablet February 1-28, 2025 26 Cloxacillin 500mg 1,500 Capsule February 1-28, 2025 27 Co-amoxiclav 625 Mg 1,500 Tablet February 1-28, 2025 28 Co-amoxiclav 1.2g Vial 50 Vial February 1-28, 2025 29 Dexa+neo+poly Opth Drops 5ml 30 Bottle February 1-28, 2025 30 Dibencozide 1mg 1,500 Capsule February 1-28, 2025 31 Diclofenac Sodium 50mg 3,000 Tablet February 1-28, 2025 32 Diltiazem 60mg 200 Tablet February 1-28, 2025 I/we Hereby Commit To Comply And Deliver All The Requirement In Accordance With The Above Stated Schedule. Conforme: Name Of Company In Print Signature Printed Name Of Authorized Representative Date Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Lot 1 - Supply & Delivery Of Medicines: # Description Qty Dosage Form Delivered, Weeks/months 33 Diphenhydramine Hcl 50mg 1,000 Capsule February 1-28, 2025 34 Dopamine 40mg/5ml 20 Amuple February 1-28, 2025 35 Epinephrine 1mg/ml 20 Ampule February 1-28, 2025 36 Fluphenazine Decanoate 25mg/ml 50 Ampule February 1-28, 2025 37 Furosemide 20mg/2ml 50 Ampule February 1-28, 2025 38 Furosemide 40mg 300 Tablet February 1-28, 2025 39 Fusidic Acid + Betamethasone Cream 5gms 200 Tube February 1-28, 2025 40 Gliclazide 60mg Mr 1,200 Tablet February 1-28, 2025 41 Hypromellose 3mg/ml 10ml 50 Bottle February 1-28, 2025 42 Hyoscine-n-butylbromide 10mg 2,000 Tablet February 1-28, 2025 43 Hydrocortisone 250mg 150 Vial February 1-28, 2025 44 Ibuprofen 200mg Softgel 2,000 Capsule February 1-28, 2025 45 Insulin Degludec /insulin Aspart 70/30 20 Pen February 1-28, 2025 46 Insulin Degludec 100 U/ml 20 Pen February 1-28, 2025 47 Ipratropium Bromide+salbutamol 500mcg/ 2.5mg Per 2.5ml Solution For Inhalation 2,000 Neb/amp February 1-28, 2025 48 Dextrose 5%lactated Ringer's Solution 1 L 100 Bottle February 1-28, 2025 I/we Hereby Commit To Comply And Deliver All The Requirement In Accordance With The Above Stated Schedule. Conforme: Name Of Company In Print Signature Printed Name Of Authorized Representative Date Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Lot 1 - Supply & Delivery Of Medicines: # Description Qty Dosage Form Delivered, Weeks/months 49 Dextrose 5%sodium Chloride 0.9%, 1l Solution 200 Bottle February 1-28, 2025 50 Dextrose 5%in Water 500ml 20 Bottle February 1-28, 2025 51 Ketoconazole Cream 200 Tube February 1-28, 2025 52 Lactulose 120ml 20 Bottle February 1-28, 2025 53 Lagundi 600mg 5000 Tablet February 1-28, 2025 54 Levocetirizine +montelukast 5mg/10mg 5000 Tablet February 1-28, 2025 55 Linagliptin 5mg 2000 Tablet February 1-28, 2025 56 Linagliptin+metformin 2.5/500 Mg 10000 Tablet February 1-28, 2025 57 Loperamide 2mg 5000 Capsule February 1-28, 2025 58 Losartan 50mg 100,000 Tablet February 1-28, 2025 59 Losartan Potassium+amlodipine 50/5mg 10000 Tablet February 1-28, 2025 60 Mefenamic Acid 500mg 10,000 Capsule February 1-28, 2025 61 Metformin 500mg 50,000 Tablet February 1-28, 2025 62 Metoclopramide 10mg/2ml 50 Ampule February 1-28, 2025 63 Metoprolol 50mg 1000 Tablet February 1-28, 2025 64 Ferrous Sulfate + Folic Acid + Vit B Complex 50000 Capsule February 1-28, 2025 I/we Hereby Commit To Comply And Deliver All The Requirement In Accordance With The Above Stated Schedule. Conforme: Name Of Company In Print Signature Printed Name Of Authorized Representative Date Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Lot 1 - Supply & Delivery Of Medicines: # Description Qty Dosage Form Delivered, Weeks/months 65 Mupirocin 500 Tube February 1-28, 2025 66 Naproxen 500mg 800 Tablet February 1-28, 2025 67 Nystatin 100,000 Iu/ml 30ml 25 Bottle February 1-28, 2025 68 Oral Rehydration Salt Powder 1,000 Sachet February 1-28, 2025 69 Permethrin Lotion 5% (30ml) 50 Bottle February 1-28, 2025 70 Phenytoin 50mg/ml Ampule 20 Ampule February 1-28, 2025 71 Phenytoin 100mg 800 Capsule February 1-28, 2025 72 Polymyxin B + Neomycin + Dexamethasone Otic Drops 50 Bottle February 1-28, 2025 73 Phenylpropanolamine Hcl 25mg + Chlorphenamine Maleate 2mg + Paracetemol 325mg 10,000 Tablet February 1-28, 2025 74 Rifampicin 150mg + Isoniazid 75mg +pyrazinamide 400mg + Ethambutol 275mg 1,200 Tablet February 1-28, 2025 75 Rifampicin 150mg + Isoniazid 75mg 2,400 Tablet February 1-28, 2025 76 Risperidone 2mg 1,500 Tablet February 1-28, 2025 77 Salbutamol 2mg 8,000 Tablet February 1-28, 2025 78 Salbutamol Nebule 1mg/ml 2,500 Neb/amp February 1-28, 2025 79 Salbutamol Sulfate 100mcg/dose 200doses 50 Metered Dose Aerosol February 1-28, 2025 80 Silymarin + B1,b6,b12 Cap 2,500 Capsule February 1-28, 2025 I/we Hereby Commit To Comply And Deliver All The Requirement In Accordance With The Above Stated Schedule. Conforme: Name Of Company In Print Signature Printed Name Of Authorized Representative Date Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Lot 1 - Supply & Delivery Of Medicines: # Description Qty Dosage Form Delivered, Weeks/months 81 Simvastatin 40mg 2,500 Tablet February 1-28, 2025 82 Sitagliptin+metformin 50/500mg 2,000 Tablet February 1-28, 2025 83 Sulfur Ointment 15gms 300 Tube February 1-28, 2025 84 Tamsulosin 200mcg 350 Tablet February 1-28, 2025 85 Tetanus Toxoid Adsorbed 40iu/0.5ml 50 Ampule February 1-28, 2025 86 Trimetazidine 35mg Mr 2,500 Tablet February 1-28, 2025 87 Vildagliptin+metformin 50/500mg 2,000 Tablet February 1-28, 2025 88 Zinc Oxide + Calamine 3.5gms 350 Sachet February 1-28, 2025 89 Omega-3 Fatty Acid Containing Eicosapentaenoic Acid 90 Mg, Docosahexaenoic Acid 60 Mg,coenzyme Q 10 100mg, Lycopene 6% 4000mcg, Selenium Dioxide 70mcg, L-carnitine 500 Mg 6,000 Capsule February 1-28, 2025 90 Vitamins And Minerals Chlorella Growth Factor 250 Mg, L-lysine 50 Mg,taurine 50 Mg,zinc Sulphate (eq. To 6.57mg Elemental Zinc) 18 Mg, Vit A. (as Acetate) 550 Mcg, Vit E. 12mg, Vit D3 5mcg,vit B1 1.2 Mg,vit B2 1.3mg, Vit B6 1.3 Mg,vit B12 2.4mcg, Niacinamide 16mg, Folic Acid 400 Mcg,ferrous Sulphate (eq. To Elemental Iron) 60mg ,sodium Ascorbate (eq. To 75.56 Mg Vit C) 85mg 6,000 February 1-28, 2025 I/we Hereby Commit To Comply And Deliver All The Requirement In Accordance With The Above Stated Schedule. Conforme: Name Of Company In Print Signature Printed Name Of Authorized Representative Date Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Lot 1 - Supply & Delivery Of Medicines: # Description Qty Dosage Form Delivered, Weeks/months 91 Vitamins And Minerals,ginseng 42 Mg, Dibasic Calcium Phosphate 75 Mg,ferrous Fumarate 25 Mg, Niacinamide 18mg,magnesium Oxide 10mg ,vit. E, Acetate 5 Mg, Calcium D Pantothenate 2.5mg, Vit B1 1.5mg, Vit.a Palmitate 2000iu, Vit B6 1mg, Vit C 1mg, Manganese Sulphate 1 Mg, Copper Sulphate 1mg, Folic Acid 300 Mcg, Potassium Iodide 0.15 Mg, Chromium Picolinate 25mcg, Vit D3 150iu,vit B12 1mcg 21,000 February 1-28, 2025 92 Vitamin B1,b6,b12 65,000 Tablet February 1-28, 2025 93 Adult Plus Powdered Milk 600g 500 Pack I/we Hereby Commit To Comply And Deliver All The Requirement In Accordance With The Above Stated Schedule. Conforme: Name Of Company In Print Signature Printed Name Of Authorized Representative Date Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Lot 2 - Supply & Delivery Of Medical Supplies: # Description Qty Dosage Form Delivered, Weeks/months 1 Acid Fast Stain, Medic (ziel-neelsen Hot Method) 3 Pcs February 1-28, 2025 2 Adult Pulse Oximeter Fingertip (durable) 5 Pcs February 1-28, 2025 3 Alcohol 70% Gallon 50 Gallon February 1-28, 2025 4 Aneroid Sphygmomanometer W/ Stethoscope (durable) 20 Set February 1-28, 2025 5 Battery Double Aa (heavy Duty) 50 Pieces February 1-28, 2025 6 Battery Triple Aaa (heavy Duty) 50 Capsule February 1-28, 2025 7 Blood Collection Tube 5ml (lavender) 1 Box February 1-28, 2025 8 Blood Collection Tube 5ml (yellow) 1 Box February 1-28, 2025 9 Cold Compress Bag 5 Pieces February 1-28, 2025 10 Denatured Alcohol 1l 2 Gallon February 1-28, 2025 11 Disinfectant Solution 20 Litrs February 1-28, 2025 12 Drug Testing Kit (urine) 1000 Unit February 1-28, 2025 13 Dsn 10cc 500 Pieces February 1-28, 2025 14 Dsn 3cc 500 Pieces February 1-28, 2025 15 Dsn 5cc 700 Pieces February 1-28, 2025 16 Easy Touch Blood Cholesterol Strips 25's 20 Bottle February 1-28, 2025 17 Easy Touch Blood Uric Strips 25's 20 Bottle February 1-28, 2025 I/we Hereby Commit To Comply And Deliver All The Requirement In Accordance With The Above Stated Schedule. Conforme: Name Of Company In Print Signature Printed Name Of Authorized Representative Date Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Lot 2 - Supply & Delivery Of Medical Supplies: # Description Qty Dosage Form Delivered, Weeks/months 18 Examination Disposable Latex Gloves Powder Free 100 Box February 1-28, 2025 19 Face Mask 50's 100 Box February 1-28, 2025 20 Heplock 20 Pieces February 1-28, 2025 21 Hot Water Bag 10 Pieces February 1-28, 2025 22 Hydrogen Peroxide 10 Volume 20 Pieces February 1-28, 2025 23 Iv Infusion Set Adult 500 Pieces February 1-28, 2025 24 Kidney Basin Stainless 4 Pieces February 1-28, 2025 25 Lubricating Jelly 80gms 50 Pieces February 1-28, 2025 26 Medical Penlight 5 Pieces February 1-28, 2025 27 Medical Oxygen Regulator 5 Pcs February 1-28, 2025 28 Muriatic Acid Solution 100 Gallon February 1-28, 2025 29 Na Hypochlorite Solution 30 Gallon February 1-28, 2025 30 Nebulizer 2 Set February 1-28, 2025 31 One Touch Select Simple Test Strip 25's 50 Bottle February 1-28, 2025 32 Oxygen Mask Cannula 150 Pieces February 1-28, 2025 33 Oxygen Trolley (5-20 Lbs) 2 Pieces February 1-28, 2025 I/we Hereby Commit To Comply And Deliver All The Requirement In Accordance With The Above Stated Schedule. Conforme: Name Of Company In Print Signature Printed Name Of Authorized Representative Date Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Lot 2 - Supply & Delivery Of Medical Supplies: # Description Qty Dosage Form Delivered, Weeks/months 34 Petroleum Jelly 25gms 100 Pieces February 1-28, 2025 35 Plastic Canister 3 Pieces February 1-28, 2025 36 Plastic Splint Adult 10 Pieces February 1-28, 2025 37 Rota Haler 50 Pieces February 1-28, 2025 38 Sphygmomanometer Valve With Bulb 20 Set February 1-28, 2025 39 Sterile Latex Surgical Gloves #7, 50pairs/box 5 Box February 1-28, 2025 40 Urinal (male) 10 Pieces February 1-28, 2025 41 Urine Container 50ml 1000 Pieces February 1-28, 2025 I/we Hereby Commit To Comply And Deliver All The Requirement In Accordance With The Above Stated Schedule. Conforme: Name Of Company In Print Signature Printed Name Of Authorized Representative Date Section Vii. Technical Specifications Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Section Vii. Technical Specifications Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Lot 1 - Supply & Delivery Of Medicines Item No. Qty. Dosage Form Agency Specification Bidder’s Statement Of Compliance 1 2,000 Tablet Acetylcysteine 600mg Effervescent 2 1,500 Tablet Aloh Mgoh +simethicone 178mg/233mg/30mg 3 5,000 Capsule Ambroxol Hydrochloride 75mg 4 10,000 Tablet Amlodipine Besilate 10mg 5 1,500 Capsule Amoxicillin 500mg 6 25,000 Capsule Ascorbic Acid +zinc 7 1,000 Tablet Aspirin 80mg 8 5,490 Tablet Atorvastatin Calcium 40mg 9 2,000 Tablet Azithromycin 10 350 Mini Bot Bacillus Clausii 2 Billion Cfu/5ml 11 2,000 Tablet Betahistine 16mg 12 2,000 Tablet Bisacodyl 5mg 13 2,000 Tablet Butamirate Citrate 50mg 14 2,000 Capsule Carbocisteine 500mg 15 2,000 Capsule Cefalexin 500mg 16 50 Vial Ceftriaxone Sodium 1gm Powder For Injection ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Section Vii. Technical Specifications Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Lot 1 - Supply & Delivery Of Medicines Item No. Qty. Dosage Form Agency Specification Bidder’s Statement Of Compliance 17 1,000 Tablet Cefuroxime 500mg 18 5,000 Capsule Celecoxib 200mg 19 15,000 Tablet Ceterizine 10mg 20 2,000 Tablet Cinnarizine 25mg 21 1,500 Tablet Ciprofloxacin 500mg 22 1,000 Tablet Citicoline 500mg 23 3,000 Tablet Clopidogrel 75mg 24 50 Tube Clotrimazole Cream (1%) 10mg/g 25 350 Tablet Clozapine 100mg 26 1,500 Capsule Cloxacillin 500mg 27 1,500 Tablet Co-amoxiclav 625 Mg 28 50 Vial Co-amoxiclav 1.2g Vial 29 30 Bottle Dexa+neo+poly Opth Drops 5ml 30 1,500 Capsule Dibencozide 1mg 31 3,000 Tablet Diclofenac Sodium 50mg 32 200 Tablet Diltiazem 60mg ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Section Vii. Technical Specifications Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Lot 1 - Supply & Delivery Of Medicines Item No. Qty. Dosage Form Agency Specification Bidder’s Statement Of Compliance 33 1,000 Capsule Diphenhydramine Hcl 50mg 34 20 Amuple Dopamine 40mg/5ml 35 20 Ampule Epinephrine 1mg/ml 36 50 Ampule Fluphenazine Decanoate 25mg/ml 37 50 Ampule Furosemide 20mg/2ml 38 300 Tablet Furosemide 40mg 39 200 Tube Fusidic Acid + Betamethasone Cream 5gms 40 1,200 Tablet Gliclazide 60mg Mr 41 50 Bottle Hypromellose 3mg/ml 10ml 42 2,000 Tablet Hyoscine-n-butylbromide 10mg 43 150 Vial Hydrocortisone 250mg 44 2,000 Capsule Ibuprofen 200mg Softgel 45 20 Pen Insulin Degludec /insulin Aspart 70/30 46 20 Pen Insulin Degludec 100 U/ml 47 2,000 Neb/amp Ipratropium Bromide+salbutamol 500mcg/ 2.5mg Per 2.5ml Solution For Inhalation 48 100 Bottle Dextrose 5%lactated Ringer's Solution 1 L ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Section Vii. Technical Specifications Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Lot 1 - Supply & Delivery Of Medicines Item No. Qty. Dosage Form Agency Specification Bidder’s Statement Of Compliance 49 200 Bottle Dextrose 5%sodium Chloride 0.9%, 1l Solution 50 20 Bottle Dextrose 5%in Water 500ml 51 200 Tube Ketoconazole Cream 52 20 Bottle Lactulose 120ml 53 5000 Tablet Lagundi 600mg 54 5000 Tablet Levocetirizine +montelukast 5mg/10mg 55 2000 Tablet Linagliptin 5mg 56 10000 Tablet Linagliptin+metformin 2.5/500 Mg 57 5000 Capsule Loperamide 2mg 58 100,000 Tablet Losartan 50mg 59 10000 Tablet Losartan Potassium+amlodipine 50/5mg 60 10,000 Capsule Mefenamic Acid 500mg 61 50,000 Tablet Metformin 500mg 62 50 Ampule Metoclopramide 10mg/2ml 63 1000 Tablet Metoprolol 50mg 64 50000 Capsule Ferrous Sulfate + Folic Acid + Vit B Complex ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Section Vii. Technical Specifications Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Lot 1 - Supply & Delivery Of Medicines Item No. Qty. Dosage Form Agency Specification Bidder’s Statement Of Compliance 65 500 Tube Mupirocin 66 800 Tablet Naproxen 500mg 67 25 Bottle Nystatin 100,000 Iu/ml 30ml 68 1,000 Sachet Oral Rehydration Salt Powder 69 50 Bottle Permethrin Lotion 5% (30ml) 70 20 Ampule Phenytoin 50mg/ml Ampule 71 800 Capsule Phenytoin 100mg 72 50 Bottle Polymyxin B + Neomycin + Dexamethasone Otic Drops 73 10,000 Tablet Phenylpropanolamine Hcl 25mg + Chlorphenamine Maleate 2mg + Paracetemol 325mg 74 1,200 Tablet Rifampicin 150mg + Isoniazid 75mg +pyrazinamide 400mg + Ethambutol 275mg 75 2,400 Tablet Rifampicin 150mg + Isoniazid 75mg 76 1,500 Tablet Risperidone 2mg 77 8,000 Tablet Salbutamol 2mg 78 2,500 Neb/amp Salbutamol Nebule 1mg/ml 79 50 Metered Dose Aerosol Salbutamol Sulfate 100mcg/dose 200doses 80 2,500 Capsule Silymarin + B1,b6,b12 Cap ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Section Vii. Technical Specifications Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Lot 1 - Supply & Delivery Of Medicines Item No. Qty. Dosage Form Agency Specification Bidder’s Statement Of Compliance 81 2,500 Tablet Simvastatin 40mg 82 2,000 Tablet Sitagliptin+metformin 50/500mg 83 300 Tube Sulfur Ointment 15gms 84 350 Tablet Tamsulosin 200mcg 85 50 Ampule Tetanus Toxoid Adsorbed 40iu/0.5ml 86 2,500 Tablet Trimetazidine 35mg Mr 87 2,000 Tablet Vildagliptin+metformin 50/500mg 88 350 Sachet Zinc Oxide + Calamine 3.5gms 89 6,000 Capsule Omega-3 Fatty Acid Containing Eicosapentaenoic Acid 90 Mg, Docosahexaenoic Acid 60 Mg,coenzyme Q 10 100mg, Lycopene 6% 4000mcg, Selenium Dioxide 70mcg, L-carnitine 500 Mg 90 6,000 Vitamins And Minerals Chlorella Growth Factor 250 Mg, L-lysine 50 Mg,taurine 50 Mg,zinc Sulphate (eq. To 6.57mg Elemental Zinc) 18 Mg, Vit A. (as Acetate) 550 Mcg, Vit E. 12mg, Vit D3 5mcg,vit B1 1.2 Mg,vit B2 1.3mg, Vit B6 1.3 Mg,vit B12 2.4mcg, Niacinamide 16mg, Folic Acid 400 Mcg,ferrous Sulphate (eq. To Elemental Iron) 60mg ,sodium Ascorbate (eq. To 75.56 Mg Vit C) 85mg ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Section Vii. Technical Specifications Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Lot 1 - Supply & Delivery Of Medicines Item No. Qty. Dosage Form Agency Specification Bidder’s Statement Of Compliance 91 21,000 Vitamins And Minerals,ginseng 42 Mg, Dibasic Calcium Phosphate 75 Mg,ferrous Fumarate 25 Mg, Niacinamide 18mg,magnesium Oxide 10mg ,vit. E, Acetate 5 Mg, Calcium D Pantothenate 2.5mg, Vit B1 1.5mg, Vit.a Palmitate 2000iu, Vit B6 1mg, Vit C 1mg, Manganese Sulphate 1 Mg, Copper Sulphate 1mg, Folic Acid 300 Mcg, Potassium Iodide 0.15 Mg, Chromium Picolinate 25mcg, Vit D3 150iu,vit B12 1mcg 92 65,000 Tablet Vitamin B1,b6,b12 93 500 Pack Adult Plus Powdered Milk 600g ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Section Vii. Technical Specifications Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Lot 2 - Supply & Delivery Of Medical Supplies Item No. Qty. Dosage Form Agency Specification Bidder’s Statement Of Compliance 1 3 Pcs Acid Fast Stain, Medic (ziel-neelsen Hot Method) 2 5 Pcs Adult Pulse Oximeter Fingertip (durable) 3 50 Gallon Alcohol 70% Gallon 4 20 Set Aneroid Sphygmomanometer W/ Stethoscope (durable) 5 50 Pieces Battery Double Aa (heavy Duty) 6 50 Capsule Battery Triple Aaa (heavy Duty) 7 1 Box Blood Collection Tube 5ml (lavender) 8 1 Box Blood Collection Tube 5ml (yellow) 9 5 Pieces Cold Compress Bag 10 2 Gallon Denatured Alcohol 1l 11 20 Litrs Disinfectant Solution 12 1000 Unit Drug Testing Kit (urine) 13 500 Pieces Dsn 10cc 14 500 Pieces Dsn 3cc 15 700 Pieces Dsn 5cc 16 20 Bottle Easy Touch Blood Cholesterol Strips 25's 17 20 Bottle Easy Touch Blood Uric Strips 25's ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Section Vii. Technical Specifications Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Lot 2 - Supply & Delivery Of Medical Supplies Item No. Qty. Dosage Form Agency Specification Bidder’s Statement Of Compliance 18 100 Box Examination Disposable Latex Gloves Powder Free 19 100 Box Face Mask 50's 20 20 Pieces Heplock 21 10 Pieces Hot Water Bag 22 20 Pieces Hydrogen Peroxide 10 Volume 23 500 Pieces Iv Infusion Set Adult 24 4 Pieces Kidney Basin Stainless 25 50 Pieces Lubricating Jelly 80gms 26 5 Pieces Medical Penlight 27 5 Pcs Medical Oxygen Regulator 28 100 Gallon Muriatic Acid Solution 29 30 Gallon Na Hypochlorite Solution 30 2 Set Nebulizer 31 50 Bottle One Touch Select Simple Test Strip 25's 32 150 Pieces Oxygen Mask Cannula 33 2 Pieces Oxygen Trolley (5-20 Lbs) ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Section Vii. Technical Specifications Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Lot 2 - Supply & Delivery Of Medical Supplies Item No. Qty. Dosage Form Agency Specification Bidder’s Statement Of Compliance 34 100 Pieces Petroleum Jelly 25gms 35 3 Pieces Plastic Canister 36 10 Pieces Plastic Splint Adult 37 50 Pieces Rota Haler 38 20 Set Sphygmomanometer Valve With Bulb 39 5 Box Sterile Latex Surgical Gloves #7, 50pairs/box 40 10 Pieces Urinal (male) 41 1000 Pieces Urine Container 50ml ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Section Viii. Checklist Of Technical And Financial Documents Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; Technical Documents ⬜ (b) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (d) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (e) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (f) Original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (g) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (h) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (i) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (j) Original Of Duly Signed And Accomplished Price Schedule(s). Section Ix. Bidding Forms Company Letterhead Statement Of Ongoing Government & Private Contracts Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Bid Reference No.: Bid2024-03 Statement Of All Its Ongoing Government And Or Private Contracts Including Contracts Awarded But Not Yet Started, If Any Whether Similar Or Not Similar In Nature. Name Of Contract Date Of Contract Contract Duration Owner’s Name And Address Kind Of Goods Amount Of Contract Value Of Outstanding Contract Total Value Of Outstanding Contract: Certified Correct: Name And Signature Of Authorized Representative Position Date Company Letterhead Statement Of Single Largest Completed Contract Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Bid Reference No.: Bid2024-03 Statement Of Single (1) Largest Completed Contract Of Similar In Nature Within The Last Two (2) Years From The Date Of Submission And Receipt Of Bids Amounting To At Least Twenty-five Percent (25%) Of The Approved Budget Of The Contract (abc) Name Of Contract Date Of Contract Contract Duration Owner’s Name And Address Kind Of Goods Amount Of Contract Amount Of Completed Contracts, Adjusted By The Bidder To Current Prices Using Psa’s Consumer Price Index, If Necessary Date Of Delivery End User’s Acceptance Or Official Receipt(s) Or Sales Invoice Issued For The Contract, (attached Copy) Certified Correct: Name And Signature Of Authorized Representative Position Date Company Letterhead Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Bid Reference No.: Bid2024-03 Certificate Of Net Financial Contracting Capacity (please Show Figures At How You Arrived At The Nfcc) This Is To Certify That Our Net Financial Contracting Capacity (nfcc) Is _________________________(p____________) Which Is At Least Equal To The Total Ceiling Price We Are Bidding. The Amount Is Computed As Follows: (please Show Computation Of Nfcc) Nfcc = (ca-cl) (15) – C Where: Ca = Current Assets Cl = Current Liabilities C = Value Of All Outstanding Or Uncompleted Portions Of The Projects Under Going Contracts, Including Awarded Contracts Yet To Be Started Coinciding With The Contract For This Project Note: The Values Of The Bidder’s Current Assets And Current Liabilities Shall Be Based On The Audited Financial Statement Submitted To The Bir. Issued This _______day Of __________2024 _______________________________________________ Name & Signature Of Authorized Representative ____________________ Position _______________ Date Company Letterhead Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Republic Of The Philippines) City Of _______________________) S.s. X------------------------------------------------------x Bid Securing Declaration Invitation To Bid: Bid2024-03 To: Leyte Regional Prison I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid-securing Declaration. 2. I/we Accept That: (a) I/we Will Be Automatically Disqualified From Bidding For Any Contract With Any Procuring Entity For A Period Of Two (2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen (15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1, Except 69.1(f), Of The Irr Of Ra 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid Securing Declaration Shall Cease To Be Valid On The Following Circumstances: (a) Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; (b) I Am/we Are Declared Ineligible Or Post-disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; (c) I Am/we Are Declared The Bidder With The Lowest Calculated Responsive Bid, And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ____ Day Of [month] [year] At [place Of Execution]. [insert Name Of Bidder’s Authorized Representative] [insert Signatory’s Legal Capacity] Affiant Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ________ And His/her Community Tax Certificate No. _______ Issued On ____ At ______. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued] Doc. No. _____ Page No. _____ Book No. _____ Series Of _____ Company Letterhead Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Bid Reference No.: Bid2024-03 Omnibus Sworn Statement Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. Select One, Delete The Other: If A Sole Proprietorship: I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. Select One, Delete The Other: If A Sole Proprietorship: As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Of The Leyte Regional Prison As Shown In The Attached Duly Notarized Special Power Of Attorney; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For The Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Of The Leyte Regional Prison, As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. Select One, Delete The Rest: If A Sole Proprietorship: The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Partnership Or Cooperative: None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Corporation Or Joint Venture: None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Following Responsibilities As A Bidder: A) Carefully Examine All Of The Bidding Documents; B) Acknowledge All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C) Made An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D) Inquire Or Secure Supplemental/bid Bulletin(s) Issued For The Supply & Delivery Of Medicines And Medical Supplies For Cy 2025. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 2024 At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ________ And His/her Community Tax Certificate No. _______ Issued On ____ At ______. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued] Doc. No. _____ Page No. _____ Book No. _____ Series Of _____ Company Letterhead Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Bid Reference No.: Bid2024-03 Bid Form Date: Invitation To Bid No: _____________________ To: Mr. Tracy B. Soriano, Msca Bac Chairperson Leyte Regional Prison Abuyog, Leyte Gentlemen And/or Ladies: Having Examined The Bidding Documents Including Bid Bulletin Numbers [insert Numbers], The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 In Conformity With The Said Bidding Documents For The Sum Of __________________________________________₱ ________ Or Such Other Sums As May Be Ascertained In Accordance With The Schedule Of Prices Attached Herewith And Made Part Of This Bid. We Undertake, If Our Bid Is Accepted, To Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements. If Our Bid Is Accepted, We Undertake To Provide A Performance Security In The Form, Amounts, And Within The Times Specified In The Bidding Documents. We Agree To Abide By This Bid For The Bid Validity Period Specified In Bds Provision For Itb Clause 17.1 And It Shall Remain Binding Upon Us And May Be Accepted At Any Time Before The Expiration Of That Period. Commissions Or Gratuities, If Any, Paid Or To Be Paid By Us To Agents Relating To This Bid, And To Contract Execution If We Are Awarded The Contract, Are Listed Below: Name And Address Of Agent Amount And Currency Purpose Of Commission Or Gratuity _____________________ _____________________ _____________________ _____________________ _____________________ _____________________ _____________________ _____________________ _____________________ (if None, State “none”) Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/confirm That We Comply With The Eligibility Requirements As Per Itb Clause 5 Of The Bidding Documents.. We Likewise Certify/confirm That The Undersigned, [for Sole Proprietorships, Insert: As The Owner And Sole Proprietor Or Authorized Representative Of Name Of Bidder, Has The Full Power And Authority To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract, On The Latter’s Behalf For The Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Of The Leyte Regional Prison. [for Partnerships, Corporations, Cooperatives, Or Joint Ventures, Insert: Is Granted Full Power And Authority By The Name Of Bidder, To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract On The Latter’s Behalf For Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Of The Leyte Regional Prison. We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Shall Be A Ground For The Rejection Of Our Bid. Dated This ________________ Day Of ________________ 2024. _________________________ __________________________ [signature Over Printed Name] [in The Capacity Of] Duly Authorized To Sign Bid For And On Behalf Of ____________________________ Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Schedule Of Prices Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Bid Reference No.: Bid2024-03 Lot 1 - Supply & Delivery Of Medicines Item No. Qty. Unit Of Issue Agency Specification Unit Price Total Bid Price Inclusive Of Vat 1 2,000 Tablet Acetylcysteine 600mg Effervescent 2 1,500 Tablet Aloh Mgoh +simethicone 178mg/233mg/30mg 3 5,000 Capsule Ambroxol Hydrochloride 75mg 4 10,000 Tablet Amlodipine Besilate 10mg 5 1,500 Capsule Amoxicillin 500mg 6 25,000 Capsule Ascorbic Acid +zinc 7 1,000 Tablet Aspirin 80mg 8 5,490 Tablet Atorvastatin Calcium 40mg 9 2,000 Tablet Azithromycin 10 350 Mini Bot Bacillus Clausii 2 Billion Cfu/5ml 11 2,000 Tablet Betahistine 16mg 12 2,000 Tablet Bisacodyl 5mg 13 2,000 Tablet Butamirate Citrate 50mg 14 2,000 Capsule Carbocisteine 500mg 15 2,000 Capsule Cefalexin 500mg 16 50 Vial Ceftriaxone Sodium 1gm Powder For Injection ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Schedule Of Prices Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Bid Reference No.: Bid2024-03 Lot 1 - Supply & Delivery Of Medicines Item No. Qty. Unit Of Issue Agency Specification Unit Price Total Bid Price Inclusive Of Vat 17 1,000 Tablet Cefuroxime 500mg 18 5,000 Capsule Celecoxib 200mg 19 15,000 Tablet Ceterizine 10mg 20 2,000 Tablet Cinnarizine 25mg 21 1,500 Tablet Ciprofloxacin 500mg 22 1,000 Tablet Citicoline 500mg 23 3,000 Tablet Clopidogrel 75mg 24 50 Tube Clotrimazole Cream (1%) 10mg/g 25 350 Tablet Clozapine 100mg 26 1,500 Capsule Cloxacillin 500mg 27 1,500 Tablet Co-amoxiclav 625 Mg 28 50 Vial Co-amoxiclav 1.2g Vial 29 30 Bottle Dexa+neo+poly Opth Drops 5ml 30 1,500 Capsule Dibencozide 1mg 31 3,000 Tablet Diclofenac Sodium 50mg 32 200 Tablet Diltiazem 60mg ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Schedule Of Prices Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Bid Reference No.: Bid2024-03 Lot 1 - Supply & Delivery Of Medicines Item No. Qty. Unit Of Issue Agency Specification Unit Price Total Bid Price Inclusive Of Vat 33 1,000 Capsule Diphenhydramine Hcl 50mg 34 20 Amuple Dopamine 40mg/5ml 35 20 Ampule Epinephrine 1mg/ml 36 50 Ampule Fluphenazine Decanoate 25mg/ml 37 50 Ampule Furosemide 20mg/2ml 38 300 Tablet Furosemide 40mg 39 200 Tube Fusidic Acid + Betamethasone Cream 5gms 40 1,200 Tablet Gliclazide 60mg Mr 41 50 Bottle Hypromellose 3mg/ml 10ml 42 2,000 Tablet Hyoscine-n-butylbromide 10mg 43 150 Vial Hydrocortisone 250mg 44 2,000 Capsule Ibuprofen 200mg Softgel 45 20 Pen Insulin Degludec /insulin Aspart 70/30 46 20 Pen Insulin Degludec 100 U/ml 47 2,000 Neb/amp Ipratropium Bromide+salbutamol 500mcg/ 2.5mg Per 2.5ml Solution For Inhalation 48 100 Bottle Dextrose 5%lactated Ringer's Solution 1 L ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Schedule Of Prices Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Bid Reference No.: Bid2024-03 Lot 1 - Supply & Delivery Of Medicines Item No. Qty. Unit Of Issue Agency Specification Unit Price Total Bid Price Inclusive Of Vat 49 200 Bottle Dextrose 5%sodium Chloride 0.9%, 1l Solution 50 20 Bottle Dextrose 5%in Water 500ml 51 200 Tube Ketoconazole Cream 52 20 Bottle Lactulose 120ml 53 5000 Tablet Lagundi 600mg 54 5000 Tablet Levocetirizine +montelukast 5mg/10mg 55 2000 Tablet Linagliptin 5mg 56 10000 Tablet Linagliptin+metformin 2.5/500 Mg 57 5000 Capsule Loperamide 2mg 58 100,000 Tablet Losartan 50mg 59 10000 Tablet Losartan Potassium+amlodipine 50/5mg 60 10,000 Capsule Mefenamic Acid 500mg 61 50,000 Tablet Metformin 500mg 62 50 Ampule Metoclopramide 10mg/2ml 63 1000 Tablet Metoprolol 50mg 64 50000 Capsule Ferrous Sulfate + Folic Acid + Vit B Complex ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Schedule Of Prices Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Bid Reference No.: Bid2024-03 Lot 1 - Supply & Delivery Of Medicines Item No. Qty. Unit Of Issue Agency Specification Unit Price Total Bid Price Inclusive Of Vat 65 500 Tube Mupirocin 66 800 Tablet Naproxen 500mg 67 25 Bottle Nystatin 100,000 Iu/ml 30ml 68 1,000 Sachet Oral Rehydration Salt Powder 69 50 Bottle Permethrin Lotion 5% (30ml) 70 20 Ampule Phenytoin 50mg/ml Ampule 71 800 Capsule Phenytoin 100mg 72 50 Bottle Polymyxin B + Neomycin + Dexamethasone Otic Drops 73 10,000 Tablet Phenylpropanolamine Hcl 25mg + Chlorphenamine Maleate 2mg + Paracetemol 325mg 74 1,200 Tablet Rifampicin 150mg + Isoniazid 75mg +pyrazinamide 400mg + Ethambutol 275mg 75 2,400 Tablet Rifampicin 150mg + Isoniazid 75mg 76 1,500 Tablet Risperidone 2mg 77 8,000 Tablet Salbutamol 2mg 78 2,500 Neb/amp Salbutamol Nebule 1mg/ml 79 50 Metered Dose Aerosol Salbutamol Sulfate 100mcg/dose 200doses 80 2,500 Capsule Silymarin + B1,b6,b12 Cap ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Schedule Of Prices Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Bid Reference No.: Bid2024-03 Lot 1 - Supply & Delivery Of Medicines Item No. Qty. Unit Of Issue Agency Specification Unit Price Total Bid Price Inclusive Of Vat 81 2,500 Tablet Simvastatin 40mg 82 2,000 Tablet Sitagliptin+metformin 50/500mg 83 300 Tube Sulfur Ointment 15gms 84 350 Tablet Tamsulosin 200mcg 85 50 Ampule Tetanus Toxoid Adsorbed 40iu/0.5ml 86 2,500 Tablet Trimetazidine 35mg Mr 87 2,000 Tablet Vildagliptin+metformin 50/500mg 88 350 Sachet Zinc Oxide + Calamine 3.5gms 89 6,000 Capsule Omega-3 Fatty Acid Containing Eicosapentaenoic Acid 90 Mg, Docosahexaenoic Acid 60 Mg,coenzyme Q 10 100mg, Lycopene 6% 4000mcg, Selenium Dioxide 70mcg, L-carnitine 500 Mg 90 6000 Vitamins And Minerals Chlorella Growth Factor 250 Mg, L-lysine 50 Mg,taurine 50 Mg,zinc Sulphate (eq. To 6.57mg Elemental Zinc) 18 Mg, Vit A. (as Acetate) 550 Mcg, Vit E. 12mg, Vit D3 5mcg,vit B1 1.2 Mg,vit B2 1.3mg, Vit B6 1.3 Mg,vit B12 2.4mcg, Niacinamide 16mg, Folic Acid 400 Mcg,ferrous Sulphate (eq. To Elemental Iron) 60mg ,sodium Ascorbate (eq. To 75.56 Mg Vit C) 85mg ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Schedule Of Prices Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Bid Reference No.: Bid2024-03 Lot 1 - Supply & Delivery Of Medicines Item No. Qty. Unit Of Issue Agency Specification Unit Price Total Bid Price Inclusive Of Vat 91 21,000 Vitamins And Minerals,ginseng 42 Mg, Dibasic Calcium Phosphate 75 Mg,ferrous Fumarate 25 Mg, Niacinamide 18mg,magnesium Oxide 10mg ,vit. E, Acetate 5 Mg, Calcium D Pantothenate 2.5mg, Vit B1 1.5mg, Vit.a Palmitate 2000iu, Vit B6 1mg, Vit C 1mg, Manganese Sulphate 1 Mg, Copper Sulphate 1mg, Folic Acid 300 Mcg, Potassium Iodide 0.15 Mg, Chromium Picolinate 25mcg, Vit D3 150iu,vit B12 1mcg 92 65,000 Tablet Vitamin B1,b6,b12 93 500 Pack Adult Plus Powdered Milk 600g ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Schedule Of Prices Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Bid Reference No.: Bid2024-03 Lot 2 - Supply & Delivery Of Medical Supplies Item No. Qty. Unit Of Issue Agency Specification Unit Price Total Bid Price Inclusive Of Vat 1 3 Pcs Acid Fast Stain, Medic (ziel-neelsen Hot Method) 2 5 Pcs Adult Pulse Oximeter Fingertip (durable) 3 50 Gallon Alcohol 70% Gallon 4 20 Set Aneroid Sphygmomanometer W/ Stethoscope (durable) 5 50 Pieces Battery Double Aa (heavy Duty) 6 50 Capsule Battery Triple Aaa (heavy Duty) 7 1 Box Blood Collection Tube 5ml (lavender) 8 1 Box Blood Collection Tube 5ml (yellow) 9 5 Pieces Cold Compress Bag 10 2 Gallon Denatured Alcohol 1l 11 20 Litrs Disinfectant Solution 12 1000 Unit Drug Testing Kit (urine) 13 500 Pieces Dsn 10cc 14 500 Pieces Dsn 3cc 15 700 Pieces Dsn 5cc 16 20 Bottle Easy Touch Blood Cholesterol Strips 25's 17 20 Bottle Easy Touch Blood Uric Strips 25's ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Schedule Of Prices Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Bid Reference No.: Bid2024-03 Lot 2 - Supply & Delivery Of Medical Supplies Item No. Qty. Unit Of Issue Agency Specification Unit Price Total Bid Price Inclusive Of Vat 18 100 Box Examination Disposable Latex Gloves Powder Free 19 100 Box Face Mask 50's 20 20 Pieces Heplock 21 10 Pieces Hot Water Bag 22 20 Pieces Hydrogen Peroxide 10 Volume 23 500 Pieces Iv Infusion Set Adult 24 4 Pieces Kidney Basin Stainless 25 50 Pieces Lubricating Jelly 80gms 26 5 Pieces Medical Penlight 27 5 Pcs Medical Oxygen Regulator 28 100 Gallon Muriatic Acid Solution 29 30 Gallon Na Hypochlorite Solution 30 2 Set Nebulizer 31 50 Bottle One Touch Select Simple Test Strip 25's 32 150 Pieces Oxygen Mask Cannula 33 2 Pieces Oxygen Trolley (5-20 Lbs) ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Schedule Of Prices Supply & Delivery Of Medicines And Medical Supplies For Cy 2025 Bid Reference No.: Bid2024-03 Lot 2 - Supply & Delivery Of Medical Supplies Item No. Qty. Unit Of Issue Agency Specification Unit Price Total Bid Price Inclusive Of Vat 34 100 Pieces Petroleum Jelly 25gms 35 3 Pieces Plastic Canister 36 10 Pieces Plastic Splint Adult 37 50 Pieces Rota Haler 38 20 Set Sphygmomanometer Valve With Bulb 39 5 Box Sterile Latex Surgical Gloves #7, 50pairs/box 40 10 Pieces Urinal (male) 41 1000 Pieces Urine Container 50ml ____________________________________ ____________________________ ________________ Name Of Company Signature Over Printed Name Date Of Authorized Representative

Tender Id: 272070924-Furniture-Comml-VSKP | Condemned And U/s Tandp Items Pertains To Divisional Commercial Stores/wat Contains To- Tubular Cusioned Chairs, Invalid Wheel Chairs, T.w. Table, Revolving Chairs, Steel Almirahs, Wooden Almirahs, Wooden Counter, Visitor Chairs, Office Wooden Desk Tables Etc. Lot Details As Per Annexure Attached. Total Auctioned Quantities Are 48 Nos Is Equivalent 1661.2 Kgs. [ferrous-551.2 Kgs + Wood- 1110 Kgs]. Hsn Code- 72044900 And Gst 18 Percent. [drm(comml)/wats Offer Statement Lr. No. Wcs/8/tandp/disposal/1/2024, Dt- 22.05.2024]. Sale And Delivery By Weight.

Details: The subject of the Public Contract is the construction modification (revitalization) of the public space on Náměstí B. Martinů and the space between Riegrova Street and the Church of St. Jakub V Polička. The above-mentioned modifications include the reconstruction of roads, sidewalks and other paved areas. In connection with the modifications of the areas, there will be newly reconstructed networks of technical infrastructure (water pipes, unified and storm sewers), which are technically viable. The Space Will Be Newly Equipped With Water Features, Vegetation And Greenery Elements That Will Be Adjusted And Appropriate Types Of Wood And Plants Will Be Newly Planted. These modifications will be related to the construction of a new retention tank for rainwater from the Church of St. Jakub And Installation Of An Automatic Irrigation System That Will Serve The Planted Greenery. The space will also be supplemented with new furniture. The construction is divided into the following objects: Io – Engineering Objects: • Io.01 Paved Areas • Io.02 Renewal of Water Supply System • Io.03 Renewal of Unified Sewerage • Io.04 Renewal of Rain Sewerage of Paved Areas • Io.05 Retention, Accumulation of Rainwater Church • Io.06 Water Features • Io.07 Public Lighting • Io.08 Overlay of Communication Line - Not Subject to This Contract. The transfer will be carried out by the owner of the communication line, Cetin As, Prague, through the contract concluded with the client. The Selected Supplier of this Procurement Procedure Must Suffer and Enable the Realization of the Transfer of Communication Management by this Company. Zo - Vegetation Arrangements: • Zo.01 Vegetation And Vegetation Measures The Subject of the Public Contract is Described in Detail in the Following Documentation: • Project Documentation for Construction Implementation Prepared by Design Office Ai5 Sro, Sokolovská 428/130, 186 00 Prague 8, Ičo: 25854372, Responsible Designer Mga. Přemysl Kokeš – Authorized Architect in Architecture A.1, No. Čka 03592 (Annex No. 5 of the Tender Documentation), • Designers of the Individual Parts of the Project Documentation Are Listed in the Accompanying Report on Page 4 (Annex No. 5 of the Tender Documentation), • Draft Contract for the Work (Annex No. 4 of the Tender Documentation), • Unassessed Statement of Area - Blind Budget (Annex No. 6 Tender Documentation), • Joint Construction Permit From 27.7.2022 With Clause Pm, ID: Mp/18603/2022/sú/k – Issued by the Building Office of the Polička Municipal Office ( annex No. 8 Tender Documentation), • Extension of the Joint Construction Permit Dated 3/5/2024 With Clause Pm, ID: Mp/14979/2024/sú/krl – Issued by the Building Office of the Polička Municipal Office (annex No. 8 Tender Documentation ), • Binding Opinion of the Department of State Monument Care of Měú Litomyšl Dated 20/05/2022, ID: Měú Litomyšl 028524/2022 (Annex No. 8 Tender Documentation), • Binding Opinion of the Regional Hygiene Station of the Pardubice Region Dated 15/06/2022, ID: Khspa 07219/2022/hok-sy (Annex No. 8 of the Tender Documentation).