Forest Product Research And Development Institute Fprdi Tender

Description Preparation Of Engineering Layout Needed For The Llda Clearance And Discharge Permit Application Such As: Drawing Requirements: Must Be Signed And Sealed By The Appropriate Chemical Engineer / Sanitary Engineer And The Owner, In Blueprints In The Required Paper Size Of 20” X 30”. A. Vicinity Map And Site Development Plan B. Floor Plan Layout C. Sewer And Drainage Line Layout D. Treatment Facility Detailed Layouts E. Septic Tank Layout " "*for Securing Llda Clearance, The Following Activities Shall Be Undertaken: (a) Preparation Project Description Report And/or Engineer’s Report (b) Preparation / Collation Of Pertinent Documents In Relation To The Application Of Llda Clearance: A. Duly Accomplished And Notarized Application Form B. Photocopy Of Environmental Compliance Certificate (ecc) / Certificate Of Non-coverage C.photocopy Of Latest General Information Sheet (for Corporation) Or Latest Articles Of Cooperative Duly Approved By Cda (for Cooperative). D. Project Description Report E. Engineering Layout Plans – Site Development Plan, Floor Plan Layout, Vicinity Map " "*for Securing A Discharge Permit, The Following Activities Shall Be Undertaken: A. Preparation Of Engineer’s Report Of Project Details, Waste Management For Waste Treatment, And Other Relevant Information Necessary For The Application. B. Preparation / Collation Of Pertinent Documents In Relation To The Application Of A Discharge Permit: C. Duly Accomplished And Notarized Application Form. D. Water Bills/readings For The Last Three (3) Months Registered In The Name Of The Applicant. E. Water Treatment Facility And Drainage Plan Layout / Septic Tank Layout, With Complete Specifications Of The Treatment Process. F. Engineer’s Report/technical Report, Which Includes The Following Information: 1. The Declaration Of Production Capacity Stating The Quantity Or Volume And The Generic Name(s) Of The Product, The Nature, And Character Of The Applicant’s Waste, Its Chemical Composition, The Total Daily Volume Of Discharge Of Raw Waste, Treatment Process, And Estimate Treatment Efficiency; And 2. The Total Daily Volume Of Water Composition And Discharge Of Finally Treated Waste Or Effluent" "preparation Of Engineering Layout Needed For The Pto Application Such As The Following: Drawing Requirements: Must Be Signed And Sealed By The Appropriate Professional Engineer And The Owner, In Blueprints In The Required Paper Size Of 20” X 30”. A. Vicinity Map And Site Development Plan B. Floor Plan Layout C. Equipment And Machinery Layout Such As Generator Sets And Biomass Dryer " "to Process And Secure The Permit To Operate (pto) From Denr Emb. For Securing A Permit To Operate From Denr-emb-ncr, The Following Activities Shall Be Undertaken: A. Data Gathering On The Project Once The Machinery Is Available; B. Preparation Of Engineer’s Report For Apsi And Apcfc Which Includes The Following: •description Of Air Pollution Source Equipment (apsi) And Corresponding Air Pollution Control Facility (apcf) With Complete Specifications; •discussion Of Apsi And Apcf Showing The Mode Of Operation, Design Criteria, The Quantities And Types Of Pollutants In The Final Emissions; •pollution Loading Of The Regulated Air Pollutants In Tons/year C. Consolidation Of Pertinent Documents Relative To The Application And Submission Of Pto Application To Denr-emb." * The Work Duration Of Scope Work Is Between Thirty (30) To Ninety Days (90) From The Date Of Inspection =========================================== Abc Php 193,000.00 ================================= Important Reminders: Please Observe The Following Instructions Below When Accomplishing The Fprdi Rfq Form. 1. Accomplish This Rfq Correctly And Accurately. 2. Do Not Alter The Contents Of This Form In Any Way. 3. Indicate "no-bid", “no Quote” Or “no Offer” For Items Not Intended To Bid 4. All Technical Specifications Are Mandatory. Failure To Comply With Any Of The Mandatory Requirements Will Disqualify Your Quotation. 5. Failure To Follow These Instructions Will Disqualify Your Entire Quotation. Bid Can Be Submitted Thru Our Official E-mail Account At Ralphnathaniel.burton@fprdi.dost.gov.ph Stating Philgeps Reference No. Or Thru Express Mail/courier. Your Quotation Will Only Be Valid When Sent To This E-mail Account. Please Use Our Official Fprdi Request For Quotation (rfq) Form. Kindly Complete All The Details In Our Official Rfq Form Including Unit Price And Total Price. Just Attach Any Additional Details/descriptions You Would Like To Include In Your Bid. Please Submit Scanned/photocopies Of The Following Documents As Required By Philgeps For Small Value Procurement - Mayor's Permit (cy 2024) - Philgeps Registration - Omnibus Sworn Statement (oss). Please Be Reminded To Use The Latest Oss Template Issued By Gppb And To Indicate The Names Of The Project And The Procuring Entity. Alternatively, You Can Submit Your Sealed Quotation To This Address On Or Before The Closing Of Bid Property And Supply Section/bac Secretariat Dost-forest Products Research And Development Institute Narra Rd. Forestry Campus, College, Los Baños, Laguna 4031