Fire Tenders

Purchaser Name: Presidency Of The Consortium For The Fire Prevention And Extinction And Rescue Service Of The Province | Installation Service of 41 Mobile Radiocommunication Terminals in the Vehicles of the Forestry Brigades

Purchaser Name: Presidency Of The Consortium For The Fire Prevention And Extinction And Rescue Service Of The Province | Civil and Property Liability Insurance Service of the Provincial Firefighters Consortium of Valencia.

Purchaser Name: Presidency Of The Consortium For The Fire Prevention And Extinction And Rescue Service Of The Province | Inspection and Preventive Maintenance Service for Pneumatic Cushions in the Cpbv.

Purchaser Name: Presidency Of The Consortium For The Fire Prevention And Extinction And Rescue Service Of The Province | Successive Tract Service Depending on the Needs and Unit Prices for the Maintenance of the Radiocommunications Terminals of the Valencia Provincial Firefighters Consortium.

Details: Description Description The Isabela State University Ilagan Campus Invites Registered Contractor/ Suppliers/ Bidders To Submit Bid Proposals /price Quotation Of The Items Listed In The Attached Rfq/rfp. Below Are The Photocopy/ Original Required Documents For Submission: A) Sec/dti/cda Registration; B) Business/mayor’s Permit; C) Bir Tax Clearance Certificate; D) Certificate Of Philgeps; E) Certificate Of No Pending Case From The National Labor Relations Commission; F) Licensed To Operate From Camp Crame. G) Do No. 174 H) National Privacy Commission Certificate Note: Any Missing Document In The Above-mentioned Checklists Is A Ground For Outright Disqualification. Send Your Proposals/ Quotation In A Sealed Envelope Before The Closing Date And Time Of This Notice And Address To: Allen A. Alejandro Bac Chairperson Isabela State University Ilagan Campus Calamagui 2nd, City Of Ilagan, Isabela Cp# - 09556095354 Email Add: Procurement.ilagan@isu.edu.ph Zach Chamberlaine M. Corpuz Bac Vice Chairman Isabela State University Ilagan Campus Calamagui 2nd, City Of Ilagan, Isabela Cp# - 09064583220 Email Add: Procurement.ilagan@isu.edu.ph Republic Of The Philippines Isabela State University City Of Ilagan, Isabela Republic Of The Philippines Isabela State University City Of Ilagan, Isabela Republic Of The Philippines Isabela State University City Of Ilagan, Isabela Invitation To Bid Supply Of Security Services For Isabela State University – Ilagan Campus 1. The Isabela State University Ilagan Campus Intends To Apply The Sum Of One Million Eight Hundred Seventy Two Thousand Pesos Only (php 1,872,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of Security Services For A Period Of Six (6) Months To Commence From The Date Of The Receipt Of Notice To Proceed (ntp). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Isabela State University Ilagan Campus Now Invites Bids For The Supply Of Manpower Requirements Of Twelve (12) Persons To Render Security Services As Well As Materials, Tools And Equipment Necessary, Appropriate And Incidental To The Performance Of The Job. Bidders Should Have Completed At Least One (1) Contract Similar To The Project Within Three (3) Years From The Date Of Submission And Receipt Of Bids. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Nondiscretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act R.a. No. 9184, Otherwise Known As The “government Procurement Reform Act.” Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To R.a. No. 5183. 4. Interested Bidders May Obtain Further Information From Isabela State University Ilagan Campus And Inspect The Bidding Documents At The Address Given Below From Monday To Thursday Between 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents In The Amount Of Five Thousand Pesos Only (php 5,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Isabela State University Ilagan Campus Will Hold A Pre-bid Conference On November 18, 2024 At 9:30 Am At The E.o. Conference Hall Administration Building, Isabela State University, City Of Ilagan, Isabela, Which Shall Be Open To All Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before December 2, 2024 At 9:00 Am At The Procurement Office Isabela State University, City Of Ilagan Isabela. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 17. 8. Bid Opening Shall Be On December 2, 2024 At 9:30 Am At The E.o. Conference Hall Administration Building, Isabela State University, City Of Ilagan Isabela. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 9. The Isabela State University Ilagan Campus Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of R.a. No. 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Allen A. Alejandro Chairperson, Bac Minimum Qualifications Of Security Guards Aside From The Valid License Issued By The Pnp/sagsd/padpao, The Security Guards Must Possess The Following Minimum Qualifications: 1. Filipino Citizen 2. At Least Those Who Have Completed 2nd Year College Of Education, I.e., Criminology, Management 3. With At Least Three Years’ Experience As Security Guard 4. Good In Oral And Written English Communication 5. Physically And Mentally Fit 6. At Least 21 Years Old 7. Minimum Height: 5’4” 8. Minimum Weight: 135 Lbs. 9. Undergone Pre-licensing Training Course 10. With Good Knowledge In Incidence Report 11. Must Have Passed The Neuropsychiatric And Drug Tests Conducted By Any Philippine Government Accredited Hospital/center. Expenses For Said Tests Are Chargeable To The Service Contractor; (submit Copy Of Result Taken Within The Last Six Months). 12. Must Have Undergone The Following Training: A. Anti-terrorism B. Basic Of Safety/fire Prevention C. First Aide Course D. Self-defense E. Firearms Handling And Safety 13. Must Possess A Valid Security License As Of Bidding Date And During Their Tour Of Duty. (submit Copy Of License) 14. That He Is Not Elective Or Appointive Government Official Or Employee Who May Be Called To Implement Or Enforce The Provisions Of R.a. 5487 And The Rules And Regulations Of The Pnp; And 15. That He Is Not Convicted Of Any Crime Involving Moral Turpitude In Addition To The Foregoing, The Service Contractor Shall Submit Summary Profile Of Security Guards, Which Must Be Attested By Service Contractor’s Authorized Signatory. Minimum Security Equipment Required By Procuring Entity The Service Contractor Shall Provide On Its Own Account All Materials Tools And Equipment Necessary, Appropriate And Incidental To The Performance Of The Job. Unless Otherwise Specified By The Pe, The Following Supplies, Materials, Tools And Equipment With The Specified Brand Will Be Utilized: - Prescribed Basic Uniform (ra 5487) - Nightstick/ Baton - Whistle - Timepiece (synchronized) - Writing Pen - Notebook And Duty Checklist - Flashlight - First Aid Kit - Service Firearms Duly Licensed - Handcuffs - Metal Detector (for Main Gate) - Communication Radio - Digital Camera - Rain Coats - Rain Boots - Umbrella Firearms Should Be In Good Condition, Covered With License By Pnp, With Complete Load Of Ammunition. All Other Materials As Per Service Contractor’s Specifications Will Be Subjected To Approval Of Pe. The Maintenance, Repair, Loss And Replacement Of Tools And Equipment Necessary And Incidental To The Performance Of Obligations Herein Required Shall Be For The Account Of The Service Contractor. Other Requirements Item Specifications 1.scope Of Work Performing And/or Conducting Security And Protection Services For Isu Personnel, Property And Events; Office Rules, Regulation And Policy Enforcement; Disaster Preparedness And Mitigation Management; And Investigation And Intelligence Administration In All Areas Covered By This Contract. All Activities/events Shall Be Recorded In Detail In The Designated Record Books. 2. Organizational Set-up The Service Contractor Shall Submit Its Organizational Set-up To Include The Names Of The Holder Of The Position For The Years, 2022, 2023 And 2024. 3. Years Of Existence The Service Contractor Must Be In The Industry Of Providing Security Services For At Least Five (5) Years. 4. Financial Stability The Company’s Retained Earnings For 2022-2024 Should Be Positive. The Liquidity Ratio For Cy 2022-2024 Should Be At Least 2:1. Formula For Liquidity Ratio: Current Assets/current Liability. 5. No. Of Resources The Service Contractor Must Provide The Following Information: A) No. Of Licensed Firearms B) No. And Kind Of Communication Devices C) No. Of Licensed Guards D) No. And Kind Of Motor Vehicle 6. Assignment Of Personnel A. The Service Contractor Shall At All Times Provide The Required Number Of Well-trained Security Supervisor And Security Guards. Such Personnel Shall Be Efficient, Dependable, Honest, Of Good Moral Character, Well – Groomed And Courteous. B. The Number Of Personnel Provided Should Be Fully Utilized As Stated In The Manpower Composition. If The Service Contractor Wishes To Provide Additional Manpower, This Should Not Be Charged To The Isabela State University. C. At No Instance Shall A Guard Be Permitted To Render Service Beyond A Period Of Twelve (12) Hours Continuously. A Violation Of This Condition Shall Be Considered Sufficient Ground To Terminate The Contract. D. The Service Contractor Shall Make Available, At Its Own Expense, Such Number Of Relievers As May Be Necessary, Who Are Ready To Take Over The Duty Schedules Of Those Regularly Assigned Guards Who Either Report Late Or Are Absent For The Day. E. The Administrative Services Shall Monitor The Performance Of All Security Personnel On Detail Within The Premises And Decide Not Only On Any And All Questions Which May Arise As To The Quality And Acceptability Of The Service Rendered, But Also On The Capability, Competence And Readiness To Perform Their Duties. The Performance Evaluation Which Shall Be Conducted On A Quarterly Basis Shall Be Based On The Performance Criteria Provided In Annex 4 Of The Technical Specifications. F. The Service Contractor Shall Provide, For Its Own Account. Proper Uniforms To Its Personnel Assigned And Complete Identification Cards Shall Be Worn At All Times Of Their Tour Of Duty. G. The Isu Reserves The Right To Demand The Immediate Replacement Of Any Personnel By The Service Contractor Who May Be Found Incompetent And Dishonest, Or Whose Continued Employment May Be Deemed Prejudicial To The Interest Of The Isu. All Replacements/deployments To Be Made By The Service Contractor Shall Have Prior Approval Of The Isu. H. The Service Contractor And Its Security Personnel Shall Comply With All Safety And Security Regulations Of The Isu. I. The Service Contractor Should Report To The Authorized Representative Of The Isu Any Untoward Incident, Complete With Supporting Documents And Photo Evidence, Within 24 Hours Of Occurrence. 7. Schedule/program Of Services. A. The Service Contractor Shall Provide The Required Personnel Seven (7) Days A Week Including Holidays. B. The Work Shift, Time Schedule, Numbers And Names Of Workers Shall Be Agreed Upon Through Internal Arrangement Between The Isu And Service Contractor. The Service Contractor Shall Observe The Shifting And Deployment Schedule Specified In The Schedule Of Requirement. C. The Service Contractor Shall Submit A Schedule/program Of Services For Approval And With Proper Coordination With Isu. D. Schedule/program Of Services May Be Altered By Isu Without Prior Notice. Isu Performance Criteria The Service Provider/contractor Should Maintain A Satisfactory Level Of Performance Throughout The Term Of The Contract Based On The Following Set Of Performance Criteria (as Per Gpbb Resolution No. 24-2007, Sec. 5.4 Of Annex A 1. Quality Of Service Delivered (40%) A. Implementation Of A Control System In The Workplace And Security Jurisdiction For The Safety And Security To Life And Property. 20% B. Responsiveness To Clients’ Needs And To Complaints And/or Incident Reports. 10% C. Availability Of Firearms And Communication Devices 5% D. Courtesy And Decorum 5% 2. Management And Suitability Of Personnel (25%) A. Supervision And Accountability 8% B. Qualification Of Assigned Guards And Training For Physical Fitness 7% C. Physical Appearance (uniforms And Other Paraphernalia) 5% D. Change And/or Replacement Of Assigned Guards 5% 3. Contract Administration And Management (25%) A. Assignment Of Guards At Designated Area/s 10% B. Implementation Of Isu Rules And Regulations And Compliance To Other Obligations Per Contract 8% C. Compliance To Labor Laws And Social Insurance Regulations 7% 4. Time Management (5%) A. Tasks Which Are Important And Urgent 3% B. Tasks Which Are Either Important Or Urgent, But Not Both 1% C. Tasks Which Are Neither Important Nor Urgent, But Routine 1% 5. Provision Of Regular Progress Reports (5%) A. Exception/incident Report 2% B. Monthly Deployment Report 2% C. Other Reports That May Be Required By The Administration Department 1%

Details: Description Invitation To Bid For The Provision Of Labor, Materials, Equipment Rental And Other Incidentals Needed For The Construction Of Feed Mill Processing Facility In Brgy. #40 Buyon, Bacarra, Ilocos Norte 1. The Department Of Agriculture - Regional Field Office 1 (da-rfo 1), Through The Gaa Fy 2024 Intends To Apply The Sum Of Ten Million Pesos (php10,000,000.00) Being The Approved Budget For The Contract (abc) To Payment Under The Contract For The Provision Of Labor, Materials, Equipment Rental And Other Incidentals Needed For The Construction Of Feed Mill Processing Facility In Brgy. #40 Buyon, Bacarra, Ilocos Norte With Project Identification Number Da-rfo-1-2024-infra-035. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Da-rfo 1 Now Invites Bids For The Above Procurement Project With The Following Details And Specifications: Details And Specifications Project Location: Brgy. #40 Buyon, Bacarra, Ilocos Norte Project Description: Construction Of Feed Mill Processing Facility With A Dimension Of 15m X 10m Component 1: Building Scope Of Work: Description Qty Unit I. Mobilization And Demobilization 1.00 L.s. Ii. Permits And Clearance 1.00 L.s Iii. Project Billboard/sign Board 1.00 L.s Iv. Safety And Health 1.00 L.s V. Construction Of Temporary Facility 12.00 Sq.m. Vi. Clearing And Grubbing 100.00 Sq.m. Vii. Earthworks 99.66 Cu.m. Viii. Rsb Works 2,429.48 Kgs Ix. Forms Works 420.00 Bd.ft. X. Concrete Works 30.00 Cu.m. Xi. Masonry Works 30.00 Sq.m. Xii. Iron Works 7,619.13 Kgs Xiii. Painting Works 100.00 Sq.m. Xiv. Roofing And Siding Works 448.44 L.m Xv. Windows And Doors 29.50 Sq.m. Xvi. Plumbing Works 1.00 Lot Xvii. Electrical Works 15.00 Outlet Xviii. Da Logo 1.00 Lot Minimum Technical Personnel Required: • 1 Project Engineer • 1 Foreman • 2 Skilled Workers • 6 Unskilled Workers Minimum Equipment Required: • 1 Concrete Mixer, One-bagger • 1 Angle Grinder • 1 Cut-off Machine • 1 Bar Cutter • 1 Welding Machine • 1 Generator Set • 1 Electrical Drill Component 2: Machinery All Components Shall Be Of The Same Brand, Brand New And Not Rebranded/renamed. 1. Built A. Compact B. System (per Component) 2. Crusher Function: Crush The Raw Materials To Powder Capacity: 100kg/hr Primemover: 4kw, Electric Motor, Single Phase 3. Mixer Function: Can Mix Materials Uniformly Capacity: 100kg/batch Where One Batch Needs 5-10mins Primemover: 4kw Electric Motor, Single Phase 4. Screw Conveyor Function: Use To Lift And Transfer Powder Or Raw Materials To The Mixer. Primemover: 2.2kw Electric Motor, Single Phase Capacity: 500 Kg/hr 5. Feed Pellet Machine Primemover:15kw, Electric Motor, 3-phase Capacity: 300 Kg/hr 6. Belt Conveyor Capacity: 200 Kg/hr Power:2.2kw, Electric Motor, Single Phase 7. Cooler And Dust Collector Function: Use To Cool The Finished Product Capacity: 200kg/hr Primemover (cooler): 0.75 Kw Primemover (dust Collector): 2.2 Kw 8. Bag Sewing Machine 9. With 2 Tons Silo Other Requirements For The Supplier Of The Goods/machinery: * Brochures/pictures, Operator’s Manual * System Testing Shall Be Conducted By Amtec After Complete Installation * Valid Permit To Operate Issued By Bafe (all Machinery Components Must Be Stated As Product Lines) And Certificate Of Namdac Accreditation Issued By Pcaf * Certificate Of Company-owned/affiliated Service Center Within The Region And Service Center Must Have A Permit To Operate Issued By Bafe * Notarized Affidavit Of Undertaking For After Sales Service That Supplier Must Render Within 72 Hours Upon Receipt Of Notice From The Recipients/ Procuring Entity * Certificate Of Availability Of Spare Parts Of The Brand/model Being Offered Within The Region To Be Issued By The Distributor/manufacturer/affiliated Service Center * Notarized Certificate Of Stock Allocation To Be Submitted During The Bid Opening Issued By The Distributor/dealer/importer Specifying The Name Of Project To Da Rfo 1 * Certificate To Conduct On-site Technical Briefing For Operators On Operation, Maintenance, And/or Repair Of The Supplied Goods By The Supplier With The Following Compatible Accessories: 1. All Components Should Be Provided With Compatible Electric Motor - Connecting Wires And Cables Shall Conform To Electrical Code Of The Philippines - Moisture And Dust Proof - With Thermal Protection Device 2. Control Panel - Compatible To The Electrical Requirements Of The Feed Milling System - Must Contain Mimic Flow Of Operation - With Basic Safety Cut-off Features Including Emergency Shutdown Button - With On-off Push Button Switch And Individual Circuit Breaker For Each Motor - Dust Proof 3. One (1) Unit Weighing Scale - Mechanical Type - Capacity: 1 Ton (minimum) - Readability: 0.5 Kg 4. With Safety And Ease Of Operation Features - Path Walks - Markings/direction/borders - Provision Of Harness - Moving And Rotating Components Of The Feed Mill Must Be Covered - Two (2) Units Fire Extinguisher For The Control Room And Feed Milling Area * Dry Chemical, Stored Pressure Type, Capacity: 6.80kg, Minimum - Basic Safety Kits 5. With Additional 2 Dies, Shieve And 1 Spare Hammermill Teeth 6. Equipped With Electrical Requirements 7. Compatible Panel Board With Circuit Breakers - The Electrical Wire, Wire Accessories, And Piping/conduit To Connect The Transformer Unit To The Main Distribution Panel Board And To The Control Panel Of The Feed Milling System Shall Be Provided By The Bidder - The Electrical Wires, Panel Board, Circuit Breakers And Piping/conduit Must Be Brand New 8. Appropriate Heavy Duty Tools: Made Of Tempered Steel And Chrome Vanadium - With Heavy Duty Toolbox And Roll Up Tools Holder 9. With Appropriate Mounting Frame - All Component Of The Feed Mill Shall Be Installed With Mounting Frame And Fitted With Brackets 10. All Major Components And Parts Of The Feed Should Be Painted Powder Coated. For Mounting Frames, Path Walks And Catwalks Should Be Painted Finish, With Rust-proofing Primer And Final Paint Color 11. With Appropriate Silent Type Generator Set 12. With Converter (from Single Phase Power To 3-phase Power) Completion Of The Works Is Within Ninety (90) Working Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Seventy-five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Prospective Bidders May Obtain Further Information From And Inspect The Bidding Documents At The Address Given Below During Office Hours At 8:00 Am To 5:00 Pm, Monday To Friday. Department Of Agriculture - Regional Field Office 1 Aguila Rd., Sevilla, City Of San Fernando, La Union 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From November 6-26, 2024 From The Address Given And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php10,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Da-rfo 1 Will Hold A Pre-bid Conference On 14 November 2024, 1:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Above On Or Before 26 November 2024, 1:00 Pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 26 November 2024, 1:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union. Bids Will Be Opened In The Presence Of The Bidders Or Their Authorized Representatives. 10. Additional Instructions To Bidders: A. The Bidders Or Their Duly Authorized Representatives May Attend The Bid Opening; B. In Case A Representative Will Be Attending The Bid Opening, A Special Power Of Attorney (spa), Secretary’s Certificate, Board Resolution Or Any Other Forms Of Authorization (notarized), As The Case May Be, Together With The Company-issued Identification Card Or Any Valid Id Must Be Presented Upon Submission Of The Bid Proposal At The Bac Secretariat. The Name/title Of The Project Must Be Indicated In The Authorization Or Spa; C. Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. Bidders Shall Submit Their Bids With Proper Index Tabbing Using The Forms Specified In The Bidding Documents In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously; The First Component Which Is The Technical Eligibility Requirements Must Be Soft-bound, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Second Component Being The Financial Requirements May Be Soft-bound/fastened In A Folder, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Technical And Financial Requirement Each In Separate Envelopes, Shall Be Enclosed In A Mother Envelope With The Same Sealing And Markings. Non-compliance With Index Tabbings Shall Not Be A Ground For Outright Disqualification Or Declaration Of Ineligibility. The Improper Index Tabbings Must Be Duly Acknowledged By The Bidder/representative And Be Subject To The Bid Evaluation And Post-qualification Of The Technical Working Group (twg) As To Their Substance. D. All Documents In The Financial Requirements Envelope Must Be Duly Signed And/or Initialed, As Needed, By The Bidder/authorized Representative On Each And Every Page Thereof. E. The Technical Specifications Of The Project (as Part Of Tab F - Project Requirements) Must Be Duly Signed/countersigned And Sealed By A Licensed Agricultural And Biosystems Engineer In Accordance With Republic Act 8559 Or Republic Act 10915. 11. The Da-rfo 1 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And Section 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Dennis I. Tactac, Abe Chairperson, Bids And Awards Committee Department Of Agriculture - Regional Field Office 1 Aguila Road, Sevilla, City Of San Fernando, La Union Tel. No.:(072) 242/1045-46, Ext. 07 E-mail Add: Bacsec@ilocos.da.gov.ph 13. For Downloading Of Bidding Documents, You May Visit The Following Websites: Da-rfo1 Website: Https://ilocos.da.gov.ph/ Philgeps Website: Https://www.philgeps.gov.ph/ November 5, 2024 Approved By: (sgd.) Gilbert D. Rabara, Dvm Vice-chairperson, Bids And Awards Committee Invitation To Bid Identification No. Da-rfo 1-2024-infra-035

Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through Special Educational Fund Intend To Apply The Sum Of P 3,883,283.75 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of School Covered Court At Kalubihon High School, Brgy. Dalipuga, Iligan City With Project No. Cb(b)-24-132 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Construction Of School Covered Court At Kalubihon High School, Brgy. Dalipuga, Iligan City • General Requirements *including Processing Of Permits & Clearances *installation Of Project Billboard, 2 Sets; *occupational Safety & Health Program; • Removal & Demolition Works *demolition Of An Existing Concrete Walkway; • Earthworks *excavation For Foundation & Tie Beam; *backfilling & Compaction; *gravel Bedding For Foundation; Tie Beam & Slab On Grade • Concrete Works , Forms & Scaffoldings *concrete Pouring For Foundation ,column, Tie Beam & Slab On Grade • Electrical Works *installation Of Electrical Wirings & Connections W/ Complete Accessories & Fixtures; • Steel Reinforcements *using 10mmø, 16mmø, 20mmøx 6m Deformed Steel Bars W/ #16 G.i. Tie Wire, For Foundation, Columns Tie Beams, Slab On Grade, Lateral Ties & Stirrups; • Steel Works *fabrication & Installation Of Steel Rafter, Steel Girt & Steel Collar (50mm X 50mm X 6mm Thk. & 38mm X 38mm X 6mm Thk. Angle Bar); *installation Of 2" X 4" X 1.20mm Thk. C-purlins W/ 10mmø Dsb Sagrods & 16mmø Dsb Cross Brace W/ Tumbuckle ; *fabrication & Installation Of Steel Ridge Girt (50mm X 50mm X 6mm Thk. & 38mm X 38mm X 4.5mm Thk. Angle Bar); *all Steel Rafter,girt, Collar, Ridge Girt, Fascia Frame, C-purlins Must Be Coat Of Epoxy Primer; *fabrication & Installation Of Steel Fascia Frame (25mm X 25mm X 4.0mm Thk. Angle Bar & 25mm X 4.0mm Thk. Flat Bar); *installation Also Of Base Plate And Must Be Full Weld On Steel Rafter At The Top Of The Column W/16mmø Anchor Bolt W/nut & Washer To Be Full Weld On Vertical Bars Of Columns; Gusset Plate For All Steel Joints On Trusses (web Members); • Tinsmithry Works *installation Of 0.40mm Thk. Long-span Colored Roof Rib Type,0.4mm Thk. Pre-fab Colored Ridge Roll, 0.30m X 2.30m X 0.4mm Thk . Pre-fab Colored Gutter,0.40mm Thk. Pre-fab Fascia Cap, 0.40mm Thk. Flashing Gutter /w Complete Accessories; I. Permits & Clearances (q = 1.00 Lumpsum) Includes Fire, Brgy. Clearance For Construction Fee, Professional Fee, White Print (a-3)-6 Sets Of Plans. Ii. Construction Safety & Health Program (q = 1.00 L.s.) Iii. Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2"x 2"x 14' Coco Lumber, 2" X 2" X 10' Coco Lumber, 2" X 2" X 8' Coco Lumber, Assorted Sizes C.w. Nails. Iv. Mobilization & Demobilization (q = 1.00 Lot) V. Removal & Demolition Works (q = 1.00 Lot) Includes Removal Of An Existing Concrete Walkway. Vi. Earthworks (q = 123.13 Cu.m) Includes Volume To Be Excavated, Volume To Be Backfilled, Gravel Bedding (1-1/2"ø). Vii. Concrete Works, Formworks And Scaffoldings (q = 54.70 Cu.m) Includes Portland Cement, Washed Sand, Washed Gravel, 4' X 8' X 1/4" Thk. Marine Plywood, 2" X 3" X 10' Coco Lumber, Assorted Sizes C.w Nails. Viii. Steel Reinforcem Ents (q = 5,748.33 Kg/s) Includes 10mm Dia. X 6m Dsb, 16mm Dia. X 6m Dsb, 20mm Dia. X 6m Dsb, #16 G.i Tie Wire. Ix. Tinsmith Ry (q = 368.33 Sq.m) Includes 0.4mm Thk. Ga. #24 Long Span Rib Type, Pre-fab Colored Ridge Roll, 0.4mm Thk. X 8', Pre-fab Colored Fascia Cover (0.4mm Thk. X 8'), Blind Rivets (1000pcs/box), Teksrew, Riveter, Aviation Metal Snip Scissor. X. Steel Works (q = 9,202.10 Kg/s) Includes 50mm X 50mm X 6m X 6mm Thk. Angle Bar- 128pcs, 38mm X 38mm X 6m X 6mm Thk. Angle Bar- 159pcs, 38mm X 38mm X 6m X 4.5mm Thk. Angle Bar- 9pcs, 25mm X 25mm X 6m X 4.0mm Thk. Angle Bar- 26pcs, 25mm X 6m X 4.0mm Thk. Flat Bar- 10pcs, 2" X 4" X 6m X 1.2mm Thk. C-purlins- 96pcs, 4' X 8' X 10mm Thk. Mild Steel Plate, 16mmø X 6mm Dsb Cross Brace- 24pcs, 16mmø Turnbuckle, Sagrods-10mmø X 6mm Dsb- 45pcs, M16ø Anchor-bolt (w/ 5% Wastage), Nut & Washer (w/ 5% Wastage), Welding Rod (6011), Epoxy Primer, 4" Paint Brush, 4" Ø Cutting Disc, 4" Ø Grinding Disc, Assorted Sand Paper. Xi. Paint Works & Finishes (q = 337.84 Sq.m.) Includes Skim Coat (a = 67.84 Sq.m), Neutralizer, Flat Latex Primer, Masonry Putty, Top Coat (1st & 2nd Coat), Acreex Floor Coating (a = 270.00 Sq.m), Acreex Reducer, Baby Roller #4 Mini, Tray Paint, Paint Brush (2"), Sand Paper. Xii. Electrical Works (q = 1.00 Lot) Includes Pvc Conduit Pipe, 3m X 1/2"inner Diameter; Pvc Conduit Pipe, 3m X 1"inner Diameter; Pvc Conduits Coupling (15mm Inner Ø); Pvc Conduit Elbow 90 Deg, (15mm Inner Ø); Pvc Conduit Elbow 90 Deg, (25mm Inner Ø); Pvc Male Adapter W/locknut (15mm Inner Ø); Pvc Corrugated Electrical Flexible Hose, 1/2" X 100meters/roll; Pvc Junction Box (octagon Shape) Depth Type W/cover & Screws 4" X 4" X 2"; Utility Box, 2" X 4" Pvc Depth Type W/cover; Tie Wire/g.i Wire, Gauge #16 (per Kilo); Electrical Tape; Pvc Clamp Clip For Pipes & Flexible Hose, 15mm, 100pcs/bag; Ufo Led High Bay 100w Smd Slim Type Black Daylight, 1100 Lm-12pcs; Electric Wires, Thhn Type. 3.50mm2 . Copper Wire: Electric Wires. Thhn Type. 14.0mm2 , Copper Wire: 2-gang Outlet, 3 Prong, Gfci, 240v; Panel Board Box, 2 Pole Bolt-on W/main Breaker, 6 Branches; Circuit Breaker, Bolt-on Screw Type Terminal, 15amp, 2 Poles/single Phase; Circuit Breaker, Bolt-on Screw Type Terminal, 20amp, 2 Poles/single Phase; Circuit Breaker, Bolt-on Screw Type Terminal, 60amp, 2 Poles/single Phase; Service Entrance Cap "/electrical Weather Cap/ Service Head/ Weatherproof Cap; Secondary Rack Heavy Duty, 2-pole W/spool Insulator & Screws; Cable Tiles (nylon), Size 150mm/100pcs Per Pack; Ground Rpd 5/8 X 4.75feet 5ft Copper Plated With Ground Clamp. Approved Budget For The Contract (abc): P 3,883,283.75 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Forty-five (145) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1.issuance Of Bid Documents: November 12 – December 3, 2024 – 8:00 A.m. At Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. 2.pre-bid Conference: November 19, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 3.submission Of Bids: December 3, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4.opening Of Bids: December 3, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: November 12, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-132(ceo-infra)

Purchaser Name: Presidency of the Consortium for the Prevention, Fire Extinction, Civil Protection and Rescue Service | Ceis Guadalajara Civil Liability Insurance Policy.

Purchaser Name: Cherkasy Institute Of Fire Safety Named After Heroes Of Chernobyl Of The National University Of Civil | 39710000-2 Електричні Побутові Прилади (кондиціонери (39717200-3 Кондиціонери))

Purchaser Name: Government Commission of the Consortium for the Fire Extinction, Salvation and Civil Protection Service | Technical Assistance and Consulting Services for the Analysis and Study of the Large Hydraulic and Industrial Facilities and Infrastructures of the Municipality for their Correct Adaptation to Tax Collection, As well as Legal Assistance Even in Contentious-administrative Proceedings, Throughout the Study Process, Correction And Improvement Of Collection.