Fire Extinguisher Tenders

Details: Description Invitation To Bid The Deped-division Of Negros Occidental Through Its Bids And Awards Committee, Invites Possible Contractors For The Supply And Delivery Of Ib - Supplies And Equipment For The Conduct Of Procurement Of Safety And Emergency Supplies And Equipment With Approved Budget For The Contract (abc) Of One Million Four Hundred Fifty Thousand Five Hundred Pesos Only (php 1,450,500.00); Lot No. Unit Item Description Quantity Estimated Cost/ Set Approved Budget For The Contact (php) 1 Unit Portable Public Address System 12v Dc/in Out Bluetooth Usd Sd Playback Fm Radio Lcd Display 2 Wireless Microphone Remote Control 5 Band Equalizer 16 11,550.00 184,800.00 Set Trauma Bag With Contents For 20-25 Person - Trauma Bag - Waterproof, Nylon -1 Aneroid Sphygmomanometer -1 Stethoscope -1 Non-contact Thermometer -1 Retractable Tourniquet -1 Pulse Oximeter -100 Band Aid -1 Hot And Cold Pack -100 4x4 Gauze Pad -100 Povidone-iodine Swabs -50 Surgical Masks -1 500ml Hydrogen-peroxide -1 120 Ml Povidone-iodine -10 Cotton Applicators -1 Penlight -1 Triangular Bandage -1 Emergency Blanket -1 100ml Sterile Water - 1-liter Pnss Irrigation - 1 150 Ball Cotton Balls - 3pcs 1cc Disp. Syringe - 3pcs 3cc Disp. Syringe - 3pcs 5cc Disp. Syringe - 100 Surgical Gloves -1 Surgical Scissor -1 Bandage Scissor -2 1inch Surgical Tape -2 1/2inch Surgical Tape -2 Elastic Bandage 2 X 5 -2 Elastic Bandage 3x5 -2 Elastic Bandage 4x5 -2 Gauze Bandage 2x10 -4 Sterile Eyepads 28 15,000.00 420,000.00 Unit Fire Extinguisher - Non-conductive - Ideal For All Classes Of Fire (abc) - Bureau Of Fire Protection Philippine Standards - Free Wall Bracket (bracket Only, No Screws.) 53 1,350.00 71,550.00 Unit Megaphone - Easy To Carry And Strong Penetration Force - Strong And Durable - Adjustable Alarm Volume - Full Can Play Continuously For 12 Hours. - Voltage：200hz-15khz - 19cm Long Lanyard, Easy To Place 2 2,750.00 5,500.00 Piece Power Spray - Engine Power: 5.5hp - Spraying Pressure: 300-500psi - Fuel: Gasoline - Single Cylinder, 4 Stroke, Air Cooled, Ohv 20 16,000.00 320,000.00 Piece Traffic Vest - With Pockets - Color: Neon Yellow 58 500.00 29,000.00 Piece Spine Board - The Stretcher Is Molded By Hdpe Material Without Pollution Release. - It Can Float On Water And Can Be Use In X-ray Or Ct Scan. - Equipped With Safety Belts - Size 187x48x7cm 2 2,500.00 5,000.00 Unit Wheelchair Seat Width :45cm And Seat Height :47cm Foldable And Solid Front Wheel: 8inches Solid Rear Wheel: 22 Inches Aluminum Frame 16-inch Fully Solid Rear Wheels Are Stable And Durable 2 6,000.00 12,000.00 Unit Solar Street Lights -radar Sensor Lights Up, Upgraded Components, Fast Sensors -upgraded Light Source, Low Consumption And High Efficiency -no Power Or Wiring Required To Meet Your Needs 26 1,400.00 36,400.00 Unit Cctv -hard Disk - 1tb -power Supply - 12 Volts 1amp 4x -produces Color Image With A Resolution Of 2000mp As Well As 1920 X 1080pixels Videos. 9 16,000.00 32,000.00 Unit Portable Power Station (500 Watts-120000mah) - 1pc Usb Output:5v 2.4a - 3pcs Dc Bulbs Jack-12v/8alcd Display/led Light - Optional Built In 500w Inverter - Solar Panel:(dc15v-20v) 50w/80w/100w - Product Weight:5.46kg 2 16,000.00 32,000.00 Unit Chainsaw - Fuel: Mixture (gasoline 25: 2-cycle Oil) - Fuel Tank Capacity: 550ml - Chain Oil: Motor Oil - Oil Tank Capacity: 260ml - Engine Displacement: 52cc - Max. Engine Speed: 11000 Rpm Max 2 16,000.00 32,000.00 Unit Flood Lights - Die-casting Aluminum Crust - High Intensity Toughened Glass Cover - High-purity Aluminum Reflector - Single High Powerful Led Light Source 8 2,000.00 16,000.00 Unit Steel Cabinet - Powder Coating - 3 Drawer And Central Lock - Material Steel Gauge20 Thickness 1 7,000.00 7,000.00 Unit Foldable Stretcher - The Main Material Is High -strength Aluminum Alloy Which Is Hardened And Surface Treated. - Equipped With Portable Handbag. - Unfolded Size: 215x52x13cm - Folded Size: 110x18x10cm - Loading Bearing: 159kg 2 2,550.00 5,100.00 Unit Folding Beds - Load Bearing: 200 Kg 2 3,000.00 6,000.00 Unit Boots For Flooding - Waterproof & Durable - Washable, Easy To Clean & Odor Resistant - Shock Absorbent 11 400.00 4,400.00 Unit Flashlight - Battery: 1*18650 Built-in Lithium Battery - Charging Method: Usb Charging - Waterproof: Life Waterproof Products - Gear Position: Main Light Osl-high-bright-slightly-blinking 10 500.00 5,000.00 Unit Handheld Transceiver - Output: 5w/1w - Frequency Range: 136.00-174.00 Mhz - Frequency Step Setting - 50 Ctcss And 104 Dcs Codes - Relay Forwarding Confirmed (1750 Hz) 5 2,150.00 10,750.00 Unit Slowdown Signage (school Zone) -15.4 X 11.5 Inches 1 3,400.00 3,400.00 Unit Rope (twine) - The 8mm Diameter Rope Is Pure White. - Can An Withstand 255kg Tension 50 50.00 2,500.00 Unit Tornado Mop - Rotate: 360 Degrees - Telescopic Rod Length: 85-125cm - Product Includes: 1*bucket, 1*stainless Steel Rod, 1*dehydrate Steel Basket, 1/2/3/5*microfiber Mop Heads Refill 11 500.00 5,500.00 Unit Generator - 3.5hp | 1500w/1300w Gasoline Generator - Model: Ge15006-5p - Rated Frequency(v-hz): 60hz - Engine Type: Air-cooled, 4-stroke, Gasoline Engine - Fuel Tank Capacity(l/gal): 5.5/1.45 - Cooling System: Air-cooled - Weight: 23.25kg 4 15,600.00 62,400.00 Unit Heavy Duty Rechargeable Flashlight - 26650 Lithium Battery - Head Diameter 3.8cm * Length 15.4cm - Life Waterproof - [5 Modes]: Strong Light - Medium Light - Low Light - Strobe – Sos - Ipx8 Waterproof 8 1,950.00 15,600.00 Unit Aluminun Ladder Heavy Duty - Ultimate Combination Of Light Weight, Stability And Strength. - The Slip-resistant Treads And Stair-like Design Provide Unmatched Comfort And Stability. - The Jumbo Step Will Stand Up To Professional And Industrial Use And Is Rated To Hold Up To 300 Kgs. 3 3,800.00 11,400.00 Unit First Aid Cabinet - Material: Plastic - Decorative, With Handle, With Lid - 3 Layer Design: Foldable Layers Inside The Storage. - Handy For Storing Medication, Tablets And Supplements. 4 800.00 3,200.00 1. The Deped-division Of Negros Occidental Invites Bid On Ib - Supplies And Equipment For The Conduct Of Procurement Of Safety And Emergency Supplies And Equipment. 2. Completion Of The Works Required Is Forty-five (45) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act.” Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperatives, And Partnerships Or Organizations With At Least Seventy-five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From The Bac Secretariat, Legal Section/office Of The Procuring Entity And Inspect The Bidding Documents At The Address Given Deped-division Of Negros Occidental Compound, Cottage Road, Bacolod City From 8:30 In The Morning To 5:00 In The Afternoon Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 13, 2025 (monday) From The Bac Secretariat In The Amount Of Five Thousand Pesos (php 5,000.00) For Abc Less Than Five Million Pesos (php 5,000,000.00), Ten Thousand Pesos (php 10,000.00) For Abc More Than Five Million (php 5, 000,000.00) And Twenty-five Thousand Pesos (php 25, 000.00) For Abc More Than Ten Million (php 10, 000,000.00). 6. Bidding Shall Be Made Per Lot. Hence, An Interested Bidder Shall Purchase Bidding Document On Per Lot Basis. 7. The Deped-division Of Negros Occidental Will Hold A Pre-bid Conference On January 21, 2025 (tuesday), 10:00 Am At Lrmds Building, Deped-division Of Negros Occidental Compound, Cottage Road, Bacolod City, Which Shall Be Open To Prospective Bidders. 8. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before 9:00 Am Of February 3, 2025 (monday) At Lrmds Building, Deped-division Of Negros Occidental Compound, Cottage Road, Bacolod City. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On Of February 3, 2025 (monday) At 10:00 Am At Lrmds Building, Deped-division Of Negros Occidental Compound, Cottage Road, Bacolod City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 9. All Bidders’ Representative Shall Present To The Bac Its Authority From Their Respective Company. 10. The Deped-division Of Negros Occidental Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Riza G. Gea Bac-secretariat Chairperson Julito L. Felicano Bac - Chairman Deped-division Of Negros Occidental

Details: Description Lot 1 - Alcohol Or Acetone Based Antiseptics Alcohol, Isopropyl, 500ml 447 Bottle Alcohol, Isopropyl, 1 Gallon 13 Bottle Total Of Lot 1: 58,920 Lot 2 - Arts And Crafts Equipment And Accessories And Supplies Eraser, Plastic/rubber 36 Piece Sign Pen, Extra Fine, Black, 0.5mm 379 Piece Sign Pen, Fine Tip, Black, 0.3mm 429 Piece Sign Pen, Medium Fine Tip, Black, 0.7mm 575 Piece Sign Pen, Extra Fine, Blue, 0.5mm 372 Piece Sign Pen, Fine Tip, Blue, 0.3mm 337 Piece Sign Pen, Medium Fine Tip, Blue, 0.7mm 493 Piece Sign Pen, Extra Fine, Red, 0.5mm 212 Piece Sign Pen, Fine Tip, Red, 0.3mm 138 Piece Sign Pen, Medium Fine Tip, Red, 0.7mm 268 Piece Sign Pen, Orange, Liquid/gel Ink, 0.5mm Needle Tip 10 Piece Sign Pen, Green, Liquid/gel Ink, 0.5mm Needle Tip 25 Piece Ballpen, Ballpoint Pen, 0.5mm, Black 1,881 Piece Ballpen, Ballpoint Pen, 0.5mm, Blue 40 Piece Ballpen, Ballpoint Pen, 0.5mm, Red 25 Piece Wrapping Paper 2 Pack Calligraphy Pen No. 2, Black 16 Piece Calligraphy Pen, Black, 0.7/1.0 27 Piece Total Of Lot 2: 219,500 Lot 3 - Audio And Visual Equipment And Supplies Document Camera 3 Unit Multimedia Projector, 4000 Or More Lumens (min.) 7 Unit Total Of Lot 3: 360,000 Lot 4 - Batteries And Cells And Accessories Battery, Dry Cell, Size Aa 74 Pack Battery, Dry Cell, Size Aaa 66 Pack Total Of Lot 4: 24,700 Lot 5 - Cleaning Equipment And Supplies Broom (walis Tambo) 11 Piece Broom (wallis Tingting) 11 Piece Cleaner, Toilet Bowl And Urinal, 900-1000ml Cap 47 Bottle Cleanser, Scouring Powder, 350grms/can 29 Can Detergent Powder, All Purpose, 1 Kilograms As Packed 76 Pouch Disinfectant Spray, Aerosol Type, 400-550 Grams Min. 90 Can Hand Soap, Liquid 75 Bottle Scouring Pad, Made Of Synthetic Nylon, 140 X 220mm 21 Pack Trashbag, Xxl Size 107 Pack/roll Trashbag, Large Size 94 Pack/roll Trashbag, Xl Size 126 Pack/roll Floor Squeegee Mop 2 Piece Disinfectant, Bleaching Solution, 1 Gallon 11 Gallon Mophandle, Heavy Duty 21 Piece Mophead, Made Of Rayon 19 Piece Insecticide Spray (not Water Based) 6 Can Total Of Lot 5: 161,370 Lot 7 - Consumer Electronics Digital Voice Recorder 5 Unit Total Of Lot 7: 13,000 Lot 8 - Face Mask Face Mask, 3 Ply, Fifty (50) Pieces Per Box 10 Box Total Of Lot 8: 1,200 Lot 9 - Fire Fighting Equipment Fire Extinguisher, Dry Chemical 15 Unit Total Of Lot 9: 75,000 Lot 10 - Flag Or Accessories Philippine National Flag, 100% Polyester 17 Piece Total Of Lot 10: 49,300 Lot 11 - Furniture And Furnishings Monobloc Chair, Beige 20 Piece Monobloc Chair, White 74 Piece Monobloc Table, Beige, 4 Seater Capacity 2 Unit Total Of Lot 11: 31,200 Lot 13 - Ict Equipment And Devices And Accessories Desktop, For Basic Users 4 Unit Desktop, For Mid-range Users 10 Unit External Hard Drive, 1tb, 2.5"hdd, Usb 3.0 29 Unit Laptop, For Mid-range Users 9 Unit Laptop, Lightweight 3 Unit Printer, Laser, Monochrome, Network-ready 6 Unit Multifunction Printer 11 Unit Inkjet Printer 1 Unit Scanner With Printer, Heavy Duty, Colored, Double Sided, Feeder Type 1 Unit Total Of Lot 13: 995,000 Lot 14 - Lightning And Fixtures And Accessories Light-emitting Diode (led) Light Bulb, 7 Watts 10 Piece Light-emitting Diode (led) Linear Tube, 18 Watts 20 Piece Fluorescent Lamp, Led, With Housing, Tubular, 36 Watts 1 Piece Total Of Lot 14: 7,500 Lot 15 - Manufacturing Components And Supplies Glue, All-purpose 321 Jar Staple Wire, Heavy Duty (binder Type), 23/13 20 Box Tape, Electrical 78 Roll Tape, Masking, 24mm, 50mm Meters Length 305 Roll Tape, Packaging, 48mm, 50 Meters Length 171 Roll Tape, Doubled Sided, 24mm, 50 Meters Length 242 Roll Double Sided Tape, With Foam, Width: 48mm 45 Roll Double Sided Tape, With Foam, Width: 24mm 20 Roll Total Of Lot 15: 99,560 Lot 17 -office Equipment And Accessories And Supplies Blade, For General Purpose Cutter/utility Knife 18 Tube Binding And Punching Machine 1 Unit Calculator, Compact, Electronic, 12 Digits Cap, 1 Unit In Individual Box 18 Unit Chalk, White Enamel 46 Box Clip, Backfold, 19mm 304 Box Clip, Backfold, 25mm 304 Box Clip, Backfold, 32mm 286 Box Clip, Backfold, 50mm 292 Box Cutter/utility Knife, For General Purpose 22 Piece Data File Box 143 Piece Dater Stamp 44 Piece Envelope, Expanding, Kraft 81 Box Envelope, Expanding, Plastic 88 Piece Envelope, Mailing 23 Box Envelope, Mailing, With Window 34 Box Fastener, Plastic 434 Box File Organizer, Expanding, Plastic, Legal 53 Piece File Tab Divider, A4 9 Pack File Tab Divider, Legal 11 Pack Folder, L-type, A4 13 Pack Folder, L-type, Legal 18 Pack Folder, Pressboard 4 Box Index Tab 2 Box Marker, Permanent, Black 560 Piece Marker, Permanent, Blue 235 Piece Marker, Permanent, Red 230 Piece Marker, Whiteboard, Black 172 Piece Marker, Whiteboard, Blue 140 Piece Marker, Whiteboard, Red 58 Piece Paper Clip, Vinyl/plastic Coated, 33mm 210 Box Paper Shredder 4 Unit Paper Trimmer/cutting Machine 4 Unit Rubber Band No. 18 49 Box Stamp Pad, Felt 324 Piece Stapler, Heavy Duty (binder) 19 Unit Tape Dispenser, Table Top 36 Piece Correction Tape Refill For Whiper Mr5 40 Piece Stamp Pad Ink, Black 14 Bottle Binder Clips, 1 5/8" (41mm) 3 Box Marker, Permanent, Broad, Black 5 Piece Push Pin, Flat Head Type, Assorted Colors, 100s/case 55 Case Metal Bookstand 10 Piece File Organizer Tray 8 Piece Documents Storage Box 6 Box Cork Board (3x5) 3 Piece White Board (3x5) 2 Piece Colored Plastic Envelope (half) 50 Piece Storage Box 170ltrs 10 Box Glue Stick (paste) 345 Piece Glue Stick (for Glue Gun) 27 Pack Quick Box, Kraft, With Lid, Heavy Duty 186 Box Total Of Lot 17: 573,300 Lot 18 - Paper Materials And Products Cartolina, Assorted Colors, 20 Pieces Per Pack 44 Pack Notepad, Stick-on, 50mm X 76mm, 2x3 257 Pad Notepad, Stick-on, 76mm X 100mm, 3x4 257 Pad Notepad, Stick-on, 76mm X 76mm, 3x3 242 Pad Steno Notebook 880 Piece Paper, Multicopy, Legal, 80gsm 342 Ream Paper, Multipurpose, A4, 70gsm 281 Ream Paper, Multipurpose, Legal, 70gsm 274 Ream Pad Paper, Ruled 11 Pad Tissue, Interfolded Paper Towel 400 Pack Sticker Paper, Glossy And/or Matte 70 Pack Photo Paper, Glossy 76 Pack Vellum Board Paper, 180gsm And/or 220gsm 135 Pack Manila Paper, 10 Sheets Per Pack 70 Pack Bondpaper, S16, Long, Blue 58 Ream Bondpaper, S16, Long, Green 45 Ream Paper, Short, S20 23 Ream Bondpaper, S16, Long, Pink 58 Ream Bondpaper, S16, Long, Yellow 58 Ream Plastic Sticky Tabs, Transparent (sign Here Tab) 64 Pad Bondpaper, S16, Long, White 10 Ream Tissue Pre-cut, 1000 Sheets Per Pack 1,000 Pack Colored Paper, Light Yellow 4 Ream Colored Paper, Light Green 4 Ream Total Of Lot 18: 545,700 Lot 20 - Pesticides Or Pest Repellents Insecticide, Aerosol Type 88 Can Total Of Lot 20: 44,000 Lot 21 - Printed Publications Handbook On Philippine Government Procurement - Ra 9184 2 Book Total Of Lot 21: 1,600 Lot 22 - Printer Or Facsimile Or Photocopier Supplies (consumables) Drum Cartridge, Brother Dr-3455, Black 14 Cart Ink Cartridge, Epson C13t664100 (t6641), Black 141 Cart Ink Cartridge, Epson C13t664100 (t6642), Cyan 92 Cart Ink Cartridge, Epson C13t664100 (t6643), Magenta 92 Cart Ink Cartridge, Epson C13t664100 (t6644), Yellow 92 Cart Ribbon Cartridge, Epson C13s015632, Black 5 Cart Toner Cartridge, Hp Cb435a (35a), Black 18 Cart Toner Cartridge, Hp Cf226a (hp26a), Black 6 Cart Ink - Brother Dcp-t720dw Btd60bk (black) 23 Bottle Ink - Brother Dcp-t720dw Bt5000m (magenta) 20 Bottle Ink - Brother Dcp-t720dw Bt5000c (cyan) 20 Bottle Ink - Brother Dcp-t720dw Bt5000y (yellow) 17 Bottle Epson 003, Black 75 Bottle Epson 003, Cyan 69 Bottle Epson 003, Yellow 67 Bottle Epson 003, Magenta 66 Bottle Epson 774 Black 73 Bottle Drum Cartridge(oliveth D-copia 5500 Ml) 3 Drum Toner Cartridge (oliveth D-copia 5500 Ml) 5 Cart Samsumg Toner Cart(mlt-d111s Black) 2 Cart Hp Gt52, Black 6 Bottle Hp Gt52, Cyan 6 Bottle Hp Gt52, Magenta 6 Bottle Hp Gt52, Yellow 6 Bottle Toner Cart, Hp Cf219a (hp19a) Black Laserjet 1 Bottle Total Of Lot 22: 748,200 For Futher Inquires, Please Do Not Hesitate To Contact Us Through This Email Po: Msdcscforbarmm@gmail.com Thank You.

Description: Public tender Vob/a Demolition and dismantling work (din 18 459); Floor covering work (din 18 365); Screed work (din 18 353); Tiling and panel work (din 18 352); Scaffolding work (din 18 451); Painting and varnishing work - coatings (din 18 363); Bricklaying (din 18 330); Plastering and stucco work (din 18 350); Wallpapering (din 18 366); Drywall work (din 18 340); Carpentry and timber construction work (DIN 18 334); Demolition and dismantling work (DIN 18 459); Construction site equipment: Construction site equipment including mobile crane 1 piece; Construction fence, wire mesh with privacy net 250 m; Construction road + container parking areas, mineral mixture 200 m²; Lawn finishing care 350 m²; Work protection: 1-chamber lock 12 pieces; Partitioning, fiber-tight and stable 250 m²; Material airlock and personnel airlock; Scaffolding work: Facade/roof scaffolding, 2 kN/m², W06 2300 m²; Provision for scaffolding 78200 m²wo; Dismantling of contaminated building materials: Demolition of asbestos cement ventilation ducts 12 pieces; Demolition of asbestos-containing flexible panels + adhesive 215 m²; Demolition of KMF impact sound insulation, D=15mm 1250 m²; Demolition of PK-containing release paper 1100 m²; Demolition work: Demolition of tiles 750 m²; Demolition of PVC floor covering 900 m²; Demolition of cement screed 360 m²; Demolition of interior wall plaster 4200 m²; Demolition of ceiling plaster + reed mats 1590 m²; Demolition of interior doors + frames 95 pcs.; Shell work: Making / widening door openings 31 pcs.; Making masonry pillars 19 pcs.; Making foundations for external staircase 1 m³; Core drilling 138 pcs.; Roofing work: Installing line ventilators in interlocking tile roof 15 pcs.; Sun protection: Venetian blinds for windows 98 pcs.; Locksmith: External staircase 1 pc.; Adjusting balcony railings 15 pcs.; plastering work: lime cement ceiling plaster 462 m²; gypsum ceiling plaster 1250 m²; lime cement wall plaster 152 m²; gypsum wall plaster 1670 m²; screed work: quick cement screed, D= 40-45 mm 1230 m²; floor covering work: linoleum covering 1160 m²; drywall work: dry screed/rock wool insulation panels D= 100 mm 609 m²; plasterboard assembly walls 469 m²; plasterboard installation walls 116 m²; plasterboard sub-ceiling 832 m²; plasterboard suspended ceiling 340 m²; tiling and natural stone work: floor tiles 84 m²; wall tiles 53 m²; carpentry work: tea kitchens 2 pcs.; interior doors office doors 23 pcs.; Damp room doors 14 pieces; metalwork: aluminum frame doors 16 pieces; sheet steel doors including frames 11 pieces; painting work: glass fabric wallpaper + emulsion paint walls 2800 m²; coating suspended plasterboard ceilings 1171 m²; coating steel perimeter frames 44 pieces; coating sheet steel doors with frames 10 pieces; overhaul coatings walls + ceilings 940 m²; industrial floor coating epoxy resin 290 m²; building cleaning work: intermediate and final cleaning 1600 m²; locking system: BKS profile double cylinder 49 pieces; digital double knob cylinder 27 pieces; transponder 100 pieces; panic lock 34 pieces; access control smart relay 11 pieces, programming device + locking plan creation HLS + building automation: -1. And 2nd floor (the ground floor was already prepared in 2018): Dismantling of the complete sanitary installation from the equipment standard for apartments and equipping the building with sanitary facilities for an office building, consisting of dismantling 31 hand basins, 21 toilets/urinals, 12 shower trays and 6 bathtubs with vanity units, shower partitions and small parts, equipping the new toilet areas with 9 hand basins, 11 toilets, 2 urinals, 1 shower tray, 2 sinks, each with support frames, instantaneous water heaters and sanitary accessories and installations for two kitchen sinks, 150 m of PP+SML waste water pipes, 200 m of stainless steel drinking water pipes with press connections and thermal insulation, 16 fire extinguishers with wall boxes, dry riser with three feed-in and 15 extraction points with pipes. -approx. 40 new radiators with approx. 180 m of C-steel pipes. -12 fans for toilet exhaust air in accordance with DIN 18017-3 and one for battery room exhaust air with PPS pipes, four split air conditioning units. -Approx. 350 sprinkler heads, approx. 500 m of sprinkler pipes for a wet and a dry system, sprinkler distributor, a sprinkler station, nitrogen generator. -Building automation with simple monitoring tasks. Electrics: Installation cable NYM-J 3x2.5 mm² various. Installation types approx. 6,000 m, installation cable Nym-j 3x1.5 mm² approx. 3,500 m, cable halogen-free Nhxhx-j-fe180 up to 3x2.5 mm² approx. 2,000 m, installation cable E 30 up to 4x2x0.8 mm approx. 2,300 m, installation distributor 230 VI 250 A indoor installation wall mounting 8 pieces, circuit breaker 1-pole character b 16a 250 pieces, cable tray perforated steel strip galvanized H 60mm W up to 600 mm approx. 300 m, electrical installation duct device installation H/w 60/130mm plastic approx. 650 m, Bap-LED surface-mounted light 35W approx. 154 pieces, LED recessed downlight D=235mm, 16 W approx. 65 pcs., LED safety lights approx. 65 pcs., LED escape sign lights approx. 40 pcs., BMA signal generator optical flashing light approx. 100 pcs., loudspeaker for wall and ceiling mounting up to 2x6 W approx. 110 pcs., data cable Cat. 6a various installation types approx. 12,000 m, data connection box sym. Cat. 6a 2 ports approx. 170 pcs.

Description: Public tender Vob/a Demolition and dismantling work (din 18 459); Floor covering work (din 18 365); Screed work (din 18 353); Tiling and panel work (din 18 352); Scaffolding work (din 18 451); Painting and varnishing work - coatings (din 18 363); Bricklaying (din 18 330); Plastering and stucco work (din 18 350); Wallpapering (din 18 366); Drywall work (din 18 340); Carpentry and timber construction work (DIN 18 334); Demolition and dismantling work (DIN 18 459); Construction site equipment: Construction site equipment including mobile crane 1 piece; Construction fence, wire mesh with privacy net 250 m; Construction road + container parking areas, mineral mixture 200 m²; Lawn finishing care 350 m²; Work protection: 1-chamber lock 12 pieces; Partitioning, fiber-tight and stable 250 m²; Material airlock and personnel airlock; Scaffolding work: Facade/roof scaffolding, 2 kN/m², W06 2300 m²; Provision for scaffolding 78200 m²wo; Dismantling of contaminated building materials: Demolition of asbestos cement ventilation ducts 12 pieces; Demolition of asbestos-containing flexible panels + adhesive 215 m²; Demolition of KMF impact sound insulation, D=15mm 1250 m²; Demolition of PK-containing release paper 1100 m²; Demolition work: Demolition of tiles 750 m²; Demolition of PVC floor covering 900 m²; Demolition of cement screed 360 m²; Demolition of interior wall plaster 4200 m²; Demolition of ceiling plaster + reed mats 1590 m²; Demolition of interior doors + frames 95 pcs.; Shell work: Making / widening door openings 31 pcs.; Making masonry pillars 19 pcs.; Making foundations for external staircase 1 m³; Core drilling 138 pcs.; Roofing work: Installing line ventilators in interlocking tile roof 15 pcs.; Sun protection: Venetian blinds for windows 98 pcs.; Locksmith: External staircase 1 pc.; Adjusting balcony railings 15 pcs.; plastering work: lime cement ceiling plaster 462 m²; gypsum ceiling plaster 1250 m²; lime cement wall plaster 152 m²; gypsum wall plaster 1670 m²; screed work: quick cement screed, D= 40-45 mm 1230 m²; floor covering work: linoleum covering 1160 m²; drywall work: dry screed/rock wool insulation panels D= 100 mm 609 m²; plasterboard assembly walls 469 m²; plasterboard installation walls 116 m²; plasterboard sub-ceiling 832 m²; plasterboard suspended ceiling 340 m²; tiling and natural stone work: floor tiles 84 m²; wall tiles 53 m²; carpentry work: tea kitchens 2 pcs.; interior doors office doors 23 pcs.; Damp room doors 14 pieces; metalwork: aluminum frame doors 16 pieces; sheet steel doors including frames 11 pieces; painting work: glass fabric wallpaper + emulsion paint walls 2800 m²; coating suspended plasterboard ceilings 1171 m²; coating steel perimeter frames 44 pieces; coating sheet steel doors with frames 10 pieces; overhaul coatings walls + ceilings 940 m²; industrial floor coating epoxy resin 290 m²; building cleaning work: intermediate and final cleaning 1600 m²; locking system: BKS profile double cylinder 49 pieces; digital double knob cylinder 27 pieces; transponder 100 pieces; panic lock 34 pieces; access control smart relay 11 pieces, programming device + locking plan creation HLS + building automation: -1. And 2nd floor (the ground floor was already prepared in 2018): Dismantling of the complete sanitary installation from the equipment standard for apartments and equipping the building with sanitary facilities for an office building, consisting of dismantling 31 hand basins, 21 toilets/urinals, 12 shower trays and 6 bathtubs with vanity units, shower partitions and small parts, equipping the new toilet areas with 9 hand basins, 11 toilets, 2 urinals, 1 shower tray, 2 sinks, each with support frames, instantaneous water heaters and sanitary accessories and installations for two kitchen sinks, 150 m of PP+SML waste water pipes, 200 m of stainless steel drinking water pipes with press connections and thermal insulation, 16 fire extinguishers with wall boxes, dry riser with three feed-in and 15 extraction points with pipes. -approx. 40 new radiators with approx. 180 m of C-steel pipes. -12 fans for toilet exhaust air in accordance with DIN 18017-3 and one for battery room exhaust air with PPS pipes, four split air conditioning units. -Approx. 350 sprinkler heads, approx. 500 m of sprinkler pipes for a wet and a dry system, sprinkler distributor, a sprinkler station, nitrogen generator. -Building automation with simple monitoring tasks. Electrics: Installation cable NYM-J 3x2.5 mm² various. Installation types approx. 6,000 m, installation cable Nym-j 3x1.5 mm² approx. 3,500 m, cable halogen-free Nhxhx-j-fe180 up to 3x2.5 mm² approx. 2,000 m, installation cable E 30 up to 4x2x0.8 mm approx. 2,300 m, installation distributor 230 VI 250 A indoor installation wall mounting 8 pieces, circuit breaker 1-pole character b 16a 250 pieces, cable tray perforated steel strip galvanized H 60mm W up to 600 mm approx. 300 m, electrical installation duct device installation H/w 60/130mm plastic approx. 650 m, Bap-LED surface-mounted light 35W approx. 154 pieces, LED recessed downlight D=235mm, 16 W approx. 65 pcs., LED safety lights approx. 65 pcs., LED escape sign lights approx. 40 pcs., BMA signal generator optical flashing light approx. 100 pcs., loudspeaker for wall and ceiling mounting up to 2x6 W approx. 110 pcs., data cable Cat. 6a various installation types approx. 12,000 m, data connection box sym. Cat. 6a 2 ports approx. 170 pcs.

Description: Public tender Vob/a Demolition and dismantling work (din 18 459); Floor covering work (din 18 365); Screed work (din 18 353); Tiling and panel work (din 18 352); Scaffolding work (din 18 451); Painting and varnishing work - coatings (din 18 363); Bricklaying (din 18 330); Plastering and stucco work (din 18 350); Wallpapering (din 18 366); Drywall work (din 18 340); Carpentry and timber construction work (DIN 18 334); Demolition and dismantling work (DIN 18 459); Construction site equipment: Construction site equipment including mobile crane 1 piece; Construction fence, wire mesh with privacy net 250 m; Construction road + container parking areas, mineral mixture 200 m²; Lawn finishing care 350 m²; Work protection: 1-chamber lock 12 pieces; Partitioning, fiber-tight and stable 250 m²; Material airlock and personnel airlock; Scaffolding work: Facade/roof scaffolding, 2 kN/m², W06 2300 m²; Provision for scaffolding 78200 m²wo; Dismantling of contaminated building materials: Demolition of asbestos cement ventilation ducts 12 pieces; Demolition of asbestos-containing flexible panels + adhesive 215 m²; Demolition of KMF impact sound insulation, D=15mm 1250 m²; Demolition of PK-containing release paper 1100 m²; Demolition work: Demolition of tiles 750 m²; Demolition of PVC floor covering 900 m²; Demolition of cement screed 360 m²; Demolition of interior wall plaster 4200 m²; Demolition of ceiling plaster + reed mats 1590 m²; Demolition of interior doors + frames 95 pcs.; Shell work: Making / widening door openings 31 pcs.; Making masonry pillars 19 pcs.; Making foundations for external staircase 1 m³; Core drilling 138 pcs.; Roofing work: Installing line ventilators in interlocking tile roof 15 pcs.; Sun protection: Venetian blinds for windows 98 pcs.; Locksmith: External staircase 1 pc.; Adjusting balcony railings 15 pcs.; plastering work: lime cement ceiling plaster 462 m²; gypsum ceiling plaster 1250 m²; lime cement wall plaster 152 m²; gypsum wall plaster 1670 m²; screed work: quick cement screed, D= 40-45 mm 1230 m²; floor covering work: linoleum covering 1160 m²; drywall work: dry screed/rock wool insulation panels D= 100 mm 609 m²; plasterboard assembly walls 469 m²; plasterboard installation walls 116 m²; plasterboard sub-ceiling 832 m²; plasterboard suspended ceiling 340 m²; tiling and natural stone work: floor tiles 84 m²; wall tiles 53 m²; carpentry work: tea kitchens 2 pcs.; interior doors office doors 23 pcs.; Damp room doors 14 pieces; metalwork: aluminum frame doors 16 pieces; sheet steel doors including frames 11 pieces; painting work: glass fabric wallpaper + emulsion paint walls 2800 m²; coating suspended plasterboard ceilings 1171 m²; coating steel perimeter frames 44 pieces; coating sheet steel doors with frames 10 pieces; overhaul coatings walls + ceilings 940 m²; industrial floor coating epoxy resin 290 m²; building cleaning work: intermediate and final cleaning 1600 m²; locking system: BKS profile double cylinder 49 pieces; digital double knob cylinder 27 pieces; transponder 100 pieces; panic lock 34 pieces; access control smart relay 11 pieces, programming device + locking plan creation HLS + building automation: -1. And 2nd floor (the ground floor was already prepared in 2018): Dismantling of the complete sanitary installation from the equipment standard for apartments and equipping the building with sanitary facilities for an office building, consisting of dismantling 31 hand wash basins, 21 toilets/urinals, 12 shower trays and 6 bathtubs with vanity units, shower partitions and small parts, equipping the new toilet areas with 9 hand wash basins, 11 toilets, 2 urinals, 1 shower tray, 2 sinks, each with support frames, instantaneous water heaters and sanitary accessories and installations for two kitchen sinks, 150 m of PP+SML waste water pipes, 200 m of stainless steel drinking water pipes with press connections and thermal insulation, 16 fire extinguishers with wall boxes, dry riser with three feed-in and 15 extraction points with pipes. -approx. 40 new radiators with approx. 180 m of C-steel pipes. -12 fans for toilet exhaust air in accordance with DIN 18017-3 and one for battery room exhaust air with piping made of PPs, four split air conditioning units. -Approx. 350 sprinkler heads, approx. 500 m of sprinkler piping for a wet and a dry system, sprinkler distributor, a sprinkler station, nitrogen generator. -Building automation with simple monitoring tasks. Electrics: Installation cable NYM-J 3x2.5 mm² various. Installation types approx. 6,000 m, installation cable Nym-j 3x1.5 mm² approx. 3,500 m, cable halogen-free Nhxhx-j-fe180 up to 3x2.5 mm² approx. 2,000 m, installation cable E 30 up to 4x2x0.8 mm approx. 2,300 m, installation distributor 230 VI 250 A indoor installation wall mounting 8 pieces, circuit breaker 1-pole character b 16a 250 pieces, cable tray perforated steel strip galvanized H 60mm W up to 600 mm approx. 300 m, electrical installation duct device installation H/w 60/130mm plastic approx. 650 m, Bap-LED surface-mounted light 35W approx. 154 pieces, LED recessed downlight D=235mm, 16 W approx. 65 pcs., LED safety lights approx. 65 pcs., LED escape sign lights approx. 40 pcs., BMA signal generator optical flashing light approx. 100 pcs., loudspeaker for wall and ceiling mounting up to 2x6 W approx. 110 pcs., data cable Cat. 6a various installation types approx. 12,000 m, data connection box sym. Cat. 6a 2 ports approx. 170 pcs.

Description: Public tender Vob/a Demolition and dismantling work (din 18 459); Floor covering work (din 18 365); Screed work (din 18 353); Tiling and panel work (din 18 352); Scaffolding work (din 18 451); Painting and varnishing work - coatings (din 18 363); Bricklaying (din 18 330); Plastering and stucco work (din 18 350); Wallpapering (din 18 366); Drywall work (din 18 340); Carpentry and timber construction work (DIN 18 334); Demolition and dismantling work (DIN 18 459); Construction site equipment: Construction site equipment including mobile crane 1 piece; Construction fence, wire mesh with privacy net 250 m; Construction road + container parking areas, mineral mixture 200 m²; Lawn finishing care 350 m²; Work protection: 1-chamber lock 12 pieces; Partitioning, fiber-tight and stable 250 m²; Material airlock and personnel airlock; Scaffolding work: Facade/roof scaffolding, 2 kN/m², W06 2300 m²; Provision for scaffolding 78200 m²wo; Dismantling of contaminated building materials: Demolition of asbestos cement ventilation ducts 12 pieces; Demolition of asbestos-containing flexible panels + adhesive 215 m²; Demolition of KMF impact sound insulation, D=15mm 1250 m²; Demolition of PK-containing release paper 1100 m²; Demolition work: Demolition of tiles 750 m²; Demolition of PVC floor covering 900 m²; Demolition of cement screed 360 m²; Demolition of interior wall plaster 4200 m²; Demolition of ceiling plaster + reed mats 1590 m²; Demolition of interior doors + frames 95 pcs.; Shell work: Making / widening door openings 31 pcs.; Making masonry pillars 19 pcs.; Making foundations for external staircase 1 m³; Core drilling 138 pcs.; Roofing work: Installing line ventilators in interlocking tile roof 15 pcs.; Sun protection: Venetian blinds for windows 98 pcs.; Locksmith: External staircase 1 pc.; Adjusting balcony railings 15 pcs.; plastering work: lime cement ceiling plaster 462 m²; gypsum ceiling plaster 1250 m²; lime cement wall plaster 152 m²; gypsum wall plaster 1670 m²; screed work: quick cement screed, D= 40-45 mm 1230 m²; floor covering work: linoleum covering 1160 m²; drywall work: dry screed/rock wool insulation panels D= 100 mm 609 m²; plasterboard assembly walls 469 m²; plasterboard installation walls 116 m²; plasterboard sub-ceiling 832 m²; plasterboard suspended ceiling 340 m²; tiling and natural stone work: floor tiles 84 m²; wall tiles 53 m²; carpentry work: tea kitchens 2 pcs.; interior doors office doors 23 pcs.; Damp room doors 14 pieces; metalwork: aluminum frame doors 16 pieces; sheet steel doors including frames 11 pieces; painting work: glass fabric wallpaper + emulsion paint walls 2800 m²; coating suspended plasterboard ceilings 1171 m²; coating steel perimeter frames 44 pieces; coating sheet steel doors with frames 10 pieces; overhaul coatings walls + ceilings 940 m²; industrial floor coating epoxy resin 290 m²; building cleaning work: intermediate and final cleaning 1600 m²; locking system: BKS profile double cylinder 49 pieces; digital double knob cylinder 27 pieces; transponder 100 pieces; panic lock 34 pieces; access control smart relay 11 pieces, programming device + locking plan creation HLS + building automation: -1. And 2nd floor (the ground floor was already prepared in 2018): Dismantling of the complete sanitary installation from the equipment standard for apartments and equipping the building with sanitary facilities for an office building, consisting of dismantling 31 hand basins, 21 toilets/urinals, 12 shower trays and 6 bathtubs with vanity units, shower partitions and small parts, equipping the new toilet areas with 9 hand basins, 11 toilets, 2 urinals, 1 shower tray, 2 sinks, each with support frames, instantaneous water heaters and sanitary accessories and installations for two kitchen sinks, 150 m of PP+SML waste water pipes, 200 m of stainless steel drinking water pipes with press connections and thermal insulation, 16 fire extinguishers with wall boxes, dry riser with three feed-in and 15 extraction points with pipes. -approx. 40 new radiators with approx. 180 m of C-steel pipes. -12 fans for toilet exhaust air in accordance with DIN 18017-3 and one for battery room exhaust air with PPS pipes, four split air conditioning units. -Approx. 350 sprinkler heads, approx. 500 m of sprinkler pipes for a wet and a dry system, sprinkler distributor, a sprinkler station, nitrogen generator. -Building automation with simple monitoring tasks. Electrics: Installation cable NYM-J 3x2.5 mm² various. Installation types approx. 6,000 m, installation cable Nym-j 3x1.5 mm² approx. 3,500 m, cable halogen-free Nhxhx-j-fe180 up to 3x2.5 mm² approx. 2,000 m, installation cable E 30 up to 4x2x0.8 mm approx. 2,300 m, installation distributor 230 VI 250 A indoor installation wall mounting 8 pieces, circuit breaker 1-pole character b 16a 250 pieces, cable tray perforated steel strip galvanized H 60mm W up to 600 mm approx. 300 m, electrical installation duct device installation H/w 60/130mm plastic approx. 650 m, Bap-LED surface-mounted light 35W approx. 154 pieces, LED recessed downlight D=235mm, 16 W approx. 65 pcs., LED safety lights approx. 65 pcs., LED escape sign lights approx. 40 pcs., BMA signal generator optical flashing light approx. 100 pcs., loudspeaker for wall and ceiling mounting up to 2x6 W approx. 110 pcs., data cable Cat. 6a various installation types approx. 12,000 m, data connection box sym. Cat. 6a 2 ports approx. 170 pcs.

Details: Description Invitation To Bid For The Procurement Of 4 Units Recirculating Dryer Under Rice Program Fy 2025 1. The Department Of Agriculture Regional Field Office Iva Through The Rice Program Intends To Apply The Sum Of Fourteen Million Four Hundred Thousand Pesos (ᵽ 14,400,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of 4 Units Recirculating Dryer Under Rice Program Fy 2025 With Project Identification No.: Itb-2025-12-057. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture Regional Field Office Iva Now Invites Bids For The Above Procurement Project. 4 Units Recirculating Dryer I. Design And Performance Type: Batch Type, Recirculating, Stationary Drying Rate: 0.8% Per Hour, Minimum (batch Type) Drying Efficiency: Minimum, 75% Moisture Gradient: Maximum, 2% Drying Loss/spillage: 1% Maximum Product Quality: A. Cracked Grain, % Increase: 3% Maximum B. Head Rice, % Decrease: 5% Maximum C. Hulled/damaged Grain, % Increase: 2% Maximum With Programmable In-line Monitoring System For Moisture Content, Temperature And Can Control Heating System And Shutdown The Drying Operation When The Grain Is Already Dried. Material Of Construction: Parts Of The Dryer With Direct Contact With The Grains Shall Be Made By Non-corrosive And Food Grade Material Eg. Stainless Steel 304. Power Requirement: Single-phase Electrical Connection, Maximum Of 5kw Rated Power Of All Electric Motors Provision Of Built-in Automatic Moisture Meter Ii. Heating System Requirement 1. Heating System 1 (petroleum Based Fuel) Petroleum Based Fuel: Direct-fired Heating System Efficiency: 90%, Minimum With The Following Components And Accessories: - Flame Sensor - Electronic Ignition System - Automatic Fuel Shut-off - Adjustable Fuel Vaporizer - Automatic Temperature Control - Elevated Non-corrosive And Heat-resistant Fuel Container At Least 200 Liters Capacity - Compatible Single-phase Electric Motor For The Heating System 2. Heating System 2 (biomass Fuel) Biomass Fuel: Indirect-fired Heating System Efficiency: 50%, Minimum With The Following Components And Accessories: - Heat Exchanger: Stainless (ss 201/ss 304, 1.2mm, Minimum) / Fire Tubes (5mm Seamless, Minimum) - Burning Chamber: Made Of Refractory Bricks - Automatic Fuel Feeder: Auger Type - Temperature Control - Compatible Electric Motor For The Heating System Iii. Other Dryer Components And Accessories 1. Pre-cleaner Input Capacity: 4-6 Ton/hr, Minimum Sieve Mechanism: All Parts That Come In Contact With Grain Must Be Made Of Non-corrosive And Food Grade Material Eg., Stainless Steel 304 Capable Of Removing Large Impurities And Unthreshed Paddy With Compatible Electric Motor" 2. Provision Of Ducting To Divert Heat Source From Heating System 1 Or Heating System 2, Made Of Stainless Steel Or Primer Painted And Powder Coated B.i. Or G.i. Sheet. Insulator Material For The Ducting Shall Be Made If Ceramic Blanket. 3. Dust Collection System Consists Of Cyclone Separator / Collector And Suction Blower. All Ducting Shall Be Fabricated From Sheet Metal And The Connectors Must Be Airtight. 4. Generator Set Rated Power/kva: Minimum 15 Kva Voltage Requirement Compatible To The System Power Supply / Generating System Should Be Brand New And Not Refurbished. At Least Three (3) Years From The Date Of Manufacture To The Date Of Opening Of Bids And With Engrave Serial Number. Provided With Mechanical Transfer Switch (mts) The Electrical Wire, Wire Accessories And Piping To Connect The Power Generating Unit To The Mts And The Dryer Control Panel / System Shall Be Provided By The Bidder With Thermal Insulation And Noise Suppressor. Noise Level: 92db Maximum, If Exceeded, Earmuffs Shall Be Provided For Each Unit. With Protection Or Covering Against Rat Entry (as Per Manufacturer’s Specification) 5. Portable Handheld Moisture Meter Grain: Applicable To Paddy/rough Rice And Milled Rice Type: Capacitance Moisture Range: 12-15% Or Wider Accuracy: ±0.5% Or Better Lcd/led Display Battery Operated With Product Brochure Written In English 6. Standard Heavy-duty Tools, Made Of Tempered Steel And Chrome Vanadium Which Shall Include But Not Limited To The Following: - One Set Socket Wrench (no. 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 23, 24, 27, 30, 32, Minimum) - One Set Combination Wrench (open And Box, 10pcs - Size Appropriate To The Drying System) - Electrical Plier: 200mm, Minimum - Screw Driver,: Philips And Flat Head, 300mm Minimum - Grease Gun: 250mm Cylinder Length, Minimum - Mechanical Pliers: 200mm, Minimum - Heavy Duty Toolbox And Roll Up Tools Holder (can Accommodate All Tools) 7. Air Compressor For Cleaning, Heavy Duty, At Least 120 Psi, 5m Air Hose 8. One (1) Unit Fire Extinguisher, Dry Chemical, Stored Pressure Type, 6 Kg Minimum 9. Provision Of Disposal Cart For The Ashes 10. With Portable, Heavy-duty Weighing Scale, Minimum 150 Kg Weighing Capacity 11. With Collapsible Cover (trapal), Thickness: S200 12. With Bagging Bin With Minimum Capacity Appropriate To The System 13. Non-stainless Material Of The Dryer Shall Be Painted Finish With Rust-proofing Primer And Final Paint Color. Iv. Other Requirements 1. Certification That The Bidder Will Submit A Duly Signed Electrical Plan Of The Drying System Offered (electrical Layout, Schedule Of Loads, General Notes And Specification, And Legends/symbols) By A Registered Professional Engineer As A Condition For Payment 2. Copy Of Equipment Manufacturer Manual Of Drying Unit, Biomass Furnace, Generator Set And Portable Handheld Moisture Meter Written In English/filipino/vernacular To Be Presented During Post-qualification Evaluation 3. Copy Of The Brochures For The Drying Unit, Generator Set, Weighing Scale, Portable Handheld Moisture Meter And Air Compressor Are To Be Presented During The Post-qualification Evaluation. 4. With Laminated Reflectorized Vinyl Sticker "da-calabarzon" Logo (254 Mm X 254mm) For The Prescribed Part Of The Dryer And Generator Set, Sticker Specifications: 140 Gsm And Thickness Of 175 Microns, Minimum 5. Manufacturer's Nameplate (engraved In A Metal Sheet) With The Serial Number Of The Machine And Serial Number Of The Power Generating Unit 6. With Valid Amtec Test Result That Conforms To The Pns-paes 201:2015-agricultural Machinery-heated-air Mechanical Dryer-specifications. Separate Amtec Test Report For Both Heating Systems Should Be Provided. 7. Conduct Of Acceptance Testing Of All Units After Complete Installation Is Required Prior To Acceptance And 100% Payment Of The Winning Bidder. 8. Certification From The Bidder That They Shall Provide All Fuel, Raw Materials (palay) And Technician/operator Needed During Acceptance Testing. 9. Certification From The Bidder That The Offered Unit Is Brand New, Latest Model And Not Rebranded 10. Conformity As To The Technical Specifications Of The Procuring Entity Signed And Sealed By An Agricultural And Biosystems Engineer As Prescribed By The Section 27.1 Of The Ra 10915 11. With National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers Accreditation And Classification (namdac) Certificate Of Accreditation 12. With Permit To Operate And Certificate Of Conformity Issued By Da-bafe As Per Memorandum Circular No. 30 Series Of 2020 13. Provision Of After Sales Services: •with One Year Warranty For Major Parts And Service From The Date Of Acceptance Of The Beneficiary •valid Certificate Of Dealership / Distributorship / Authority To Sell And Commitment To Supply Directly Issued By The Dryer Manufacturer Or Distributor To The Bidder •certification From The Supplier That They Will Repair Or Replace The Defective Parts Or Components And Provide After-sales Service Within 72 Hours (3 Days) Upon Receipt Of Complaints (pns/bafs/paes 192:2024) •certification That The Bidder Will Provide Training On The Proper Handling, Operation And Maintenance Of The Dryer And Generator Set For At Least Two (2) Operators Per Beneficiary. 14. Notarized Certificate Of Stock Availability Or Stock Allocation From The National Distributor Or Manufacturer Specifying The Name Of The Project 15. Certification Of Guaranteed Spare Parts Availability For At Least Five (5) Years 16. With Certification Of Very Satisfactory Performance Of The Supplier From At Least Three (3) Clients, With Full Address And Telephone Numbers, Within The Last Two (2) Years. V. Terms Of Payment 85 % Upon Complete Installation And 15% Upon Testing/commissioning And Acceptance Of Recipient Vi. Contract Duration And Delivery Place: Days To Complete Supply, Delivery, Installation And Testing: 120 Calendar Days Delivery Place: Laguna, Rizal And Quezon Delivery Of The Goods Is Required Of 120 Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). I. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Ii. Prospective Bidders May Obtain Further Information From Department Of Agriculture Regional Field Office Iva, 8:00 Am To 3:00 Pm Mondays Thru Fridays Except On The Scheduled Time Of Pre-bid Conference And Inspect The Bidding Documents At The Address Given Below: Department Of Agriculture Regional Field Office Iv-a Bac Secretariat Office / Arturo R. Tanco Training Hall Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Iii. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On The Address Given Above Mondays Thru Fridays 8:00 Am To 3:00 Pm Except On The Scheduled Time Of Pre-bid And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty-five Thousand Pesos (ᵽ 25,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, Or Through Electronic Means. 6. The Department Of Agriculture Regional Field Office Iva Will Hold A Pre-bid Conference On December 26, 2024 10:40 Am (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity. Furthermore, Bidders Are Required To Provide Their Company Id And Another Valid Id, And Authorization Letter From The Company They Represent.) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas On Or Before January 7, 2025, 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 7, 2025, 10:40 Am (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity. Furthermore, Bidders Are Required To Provide Their Company Id And Another Valid Id, And Authorization Letter From The Company They Represent.) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agriculture Regional Field Office Iv-a Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation 11. The Department Of Agriculture Regional Field Office Iva Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Engr. Ernie N. Rabusa Chairperson, Bids And Awards Committee Secretariat Department Of Agriculture Regional Field Office Iv-a Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Contact No.: (02) 8273-24-74 (local 4487) Email Address: Bacsecretariat@calabarzon.da.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: [https://notices.philgeps.gov.ph; Https://calabarzon.da.gov.ph/invitation-to-bid-page/] Date Of Issue: December 17, 2024 _____________________________________ (sgd) Engr. Romelo F. Reyes Chairperson, Bids And Awards Committee

Details: Description Invitation To Bid For The Procurement Of 2 Units Recirculating Dryer (6 Tonner) Under Corn Program Fy 2025 1. The Department Of Agriculture Regional Field Office Iva Through The Corn Program Intends To Apply The Sum Of Seven Million Two Hundred Thousand Pesos (ᵽ 7,200,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of 2 Units Recirculating Dryer (6 Tonner) Under Corn Program Fy 2025 With Project Identification No.: Itb-2025-12-061. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture Regional Field Office Iva Now Invites Bids For The Above Procurement Project. 2 Units Recirculating Dryer (6 Tonner) I. Design And Performance Type: Batch Type, Recirculating, Stationary Capacity: 4 To 6 Mt Drying Rate: 2% Per Hour, Minimum (batch Type) Drying Efficiency: Minimum, 75% Moisture Gradient: Maximum, 2% Drying Loss/spillage: 1% Maximum Product Quality: A. Cracked Grain, % Increase: 10%, Maximum B. Broken/split Kernels, % Increase: 7%, Maximum C. Hulled/damaged Grain, % Increase, 2% Maximum With Programmable In-line Monitoring System For Moisture Content, Temperature And Can Control Heating System And Shutdown The Drying Operation When The Grain Is Already Dried. Material Of Construction: Parts Of The Dryer With Direct Contact With The Grains Shall Be Made By Non-corrosive And Food Grade Material Eg. Stainless Steel 304. Power Requirement: Single-phase Electrical Connection, Maximum 5 Kw Rated Power Of All Electric Motors Ii. Heating System Requirement 1. Heating System 1 (petroleum Based Fuel) Petroleum Based Fuel: Direct-fired Heating System Efficiency: 90%, Minimum With The Following Components And Accessories: - Flame Sensor - Electronic Ignition System - Automatic Fuel Shut-off - Adjustable Fuel Vaporizer - Automatic Temperature Control - Elevated Non-corrosive And Heat Resistant Fuel Container At Least 200 Liters Capacity - Compatible Single-phase Electric Motor For The Heating System 2. Heating System 2 (biomass Fuel) Biomass Fuel: Indirect-fired Heating System Efficiency: 50%, Minimum With The Following Components And Accessories: - Heat Exchanger: Stainless (ss 201/ss 304, 1.2mm, Minimum) / Fire Tubes (5mm Seamless, Minimum) - Burning Chamber: Made Of Refractory Bricks - Automatic Fuel Feeder: Auger Type - Temperature Control - Compatible Electric Motor For The Heating System Iii. Other Dryer Components And Accessories 1. Pre-cleaner Input Capacity: 4-6 Ton/hr, Minimum Sieve Mechanism: All Parts That Come In Contact With Grain Must Be Made By Non-corrosive And Food Grade Material Eg. Stainless Steel 304. Capable Of Removing Large Impurities And Unthreshed Paddy With Compatible Electric Motor" 2. Provision Of Ducting To Divert Heat Source From Heating System 1 Or Heating System 2, Made Of Stainless Steel Or Primer Painted And Powder Coated B.i. Or G.i. Sheet. Insulator Material For The Ducting Shall Be Made Of Ceramic Blanket. 3. Dust Collection System Consists Of Cyclone Separator / Collector And Suction Blower. All Ducting Shall Be Fabricated From Sheet Metal And The Connectors Must Be Airtight. 4. Generator Set Rated Power/kva: Minimum 15 Kva Voltage Requirement Compatible To The System Power Supply / Generating System Should Be Brand New And Not Refurbished. At Least Three (3) Years From The Date Of Manufacture To The Date Of Opening Of Bids And With Engrave Serial Number. Provided With Mechanical Transfer Switch (mts) The Electrical Wire, Wire Accessories And Piping To Connect The Power Generating Unit To The Mts And The Dryer Control Panel / System Shall Be Provided By The Bidder With Thermal Insulation And Noise Suppressor. Noise Level: 92db Maximum, If Exceeded, Earmuffs Shall Be Provided For Each Unit. With Protection Or Covering Against Rat Entry (as Per Manufacturer’s Specification) 5. Portable Handheld Moisture Meter Grain: Applicable To Corn Kernel, Paddy/rough Rice And Milled Rice Type: Capacitance Moisture Range: 12-15% Or Wider Accuracy: ±0.5% Or Better Lcd/led Display Battery Operated With Product Brochure Written In English 6. Standard Heavy-duty Tools, Made Of Tempered Steel And Chrome Vanadium Shall Include But Not Limited To The Following: - One Set Socket Wrench (no. 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 23, 24, 27, 30, 32, Minimum) - One Set Combination Wrench (open And Box, 10pcs - Size Appropriate To The Drying System) - Electrical Plier: 200mm, Minimum - Screw Driver,: Philips And Flat Head, 300mm Minimum - Grease Gun: 250mm Cylinder Length, Minimum - Mechanical Pliers: 200mm, Minimum - Heavy Duty Toolbox And Roll Up Tools Holder (can Accommodate All Tools) 7. Air Compressor For Cleaning, Heavy Duty, At Least 120 Psi, 5m Air Hose 8. One (1) Unit Fire Extinguisher, Dry Chemical, Stored Pressure Type, 6 Kg Minimum 9. Provision Of Disposal Cart For The Ashes 10. With Portable, Heavy-duty Weighing Scale, Minimum 150 Kg Weighing Capacity 11. With Collapsible Cover (trapal), Thickness: S200 12. With Bagging Bin With Minimum Capacity Appropriate To The System 13. Non-stainless Material Of The Dryer Shall Be Painted Finish With Rust-proofing Primer And Final Paint Color. Iv. Other Requirements 1. Certification That The Bidder Will Submit A Duly Signed Electrical Plan Of The Drying System Offered (electrical Layout, Schedule Of Loads, General Notes And Specification, And Legends/symbols) By A Registered Professional Engineer As A Condition For Payment 2. Copy Of Equipment Manufacturer Manual Of Drying Unit, Biomass Furnace, Generator Set And Portable Handheld Moisture Meter Written In English/filipino/vernacular To Be Presented During Post-qualification Evaluation 3. Copy Of The Brochures For The Drying Unit, Generator Set, Weighing Scale, Portable Handheld Moisture Meter And Air Compressor Are To Be Presented During The Post-qualification Evaluation. 4. With Laminated Reflectorized Vinyl Sticker "da-calabarzon" Logo (254 Mm X 254mm) For The Prescribed Part Of The Dryer And Generator Set, Sticker Specifications: 140 Gsm And Thickness Of 175 Microns, Minimum 5. Manufacturer's Nameplate (engraved In A Metal Sheet) With The Serial Number Of The Machine And Serial Number Of The Power Generating Unit 6. With Valid Amtec Test Result That Conforms To The Pns-paes 201:2015-agricultural Machinery-heated-air Mechanical Dryer-specifications. Separate Amtec Test Report For Both Heating Systems Should Be Provided. 7. Conduct Of Acceptance Testing Of All Units After Complete Installation Is Required Prior To Acceptance And 100% Payment Of The Winning Bidder. 8. Certification From The Bidder That They Shall Provide All Fuel, Raw Materials (corn Kernels) And Technician/operator Needed During Acceptance Testing. 9. Certification From The Bidder That The Offered Unit Is Brand New, Latest Model And Not Rebranded 10. Conformity As To The Technical Specifications Of The Procuring Entity Signed And Sealed By An Agricultural And Biosystems Engineer As Prescribed By The Section 27.1 Of The Ra 10915 11. With National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers Accreditation And Classification (namdac) Certificate Of Accreditation 12. With Permit To Operate And Certificate Of Conformity Issued By Da-bafe As Per Memorandum Circular No. 30 Series Of 2020 13. Provision Of After Sales Services: •with One Year Warranty For Major Parts And Service From The Date Of Acceptance Of The Beneficiary •valid Certificate Of Dealership / Distributorship / Authority To Sell And Commitment To Supply Directly Issued By The Dryer Manufacturer Or Distributor To The Bidder •certification From The Supplier That They Will Repair Or Replace The Defective Parts Or Components And Provide After-sales Service Within 72 Hours (3 Days) Upon Receipt Of Complaints (pns/bafs/paes 192:2024) •certification That The Bidder Will Provide Training On The Proper Handling, Operation And Maintenance Of The Dryer And Generator Set For At Least Two (2) Operators Per Beneficiary. 14. Notarized Certificate Of Stock Availability Or Stock Allocation From The National Distributor Or Manufacturer Specifying The Name Of The Project 15. Certification Of Guaranteed Spare Parts Availability For At Least Five (5) Years 16. With Certification Of Very Satisfactory Performance Of The Supplier From At Least Three (3) Clients, With Full Address And Telephone Numbers, Within The Last Two (2) Years. V. Terms Of Payment 85 % Upon Complete Installation And 15% Upon Testing/commissioning And Acceptance Of Recipient Vi. Contract Duration And Delivery Place: Days To Complete Supply, Delivery, Installation And Testing: 60 Calendar Days Delivery Place: Batangas And Quezon Delivery Of The Goods Is Required Within Sixty (60) Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Department Of Agriculture Regional Field Office Iva, 8:00 Am To 3:00 Pm Mondays Thru Fridays Except On The Scheduled Time Of Pre-bid Conference And Inspect The Bidding Documents At The Address Given Below: Department Of Agriculture Regional Field Office Iv-a Bac Secretariat Office / Arturo R. Tanco Training Hall Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On The Address Given Above Mondays Thru Fridays 8:00 Am To 3:00 Pm Except On The Scheduled Time Of Pre-bid And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Ten Thousand Pesos (ᵽ10,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, Or Through Electronic Means. 6. The Department Of Agriculture Regional Field Office Iva Will Hold A Pre-bid Conference On December 26, 2024 01:10 Pm (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity. Furthermore, Bidders Are Required To Provide Their Company Id And Another Valid Id, And Authorization Letter From The Company They Represent.) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas On Or Before January 7, 2025 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 7, 2025 01:10 Pm (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agriculture Regional Field Office Iv-a Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation 11. The Department Of Agriculture Regional Field Office Iva Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Engr. Ernie N. Rabusa Chairperson, Bids And Awards Committee Secretariat Department Of Agriculture Regional Field Office Iv-a Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Contact No.: (02) 8273-24-74 (local 4487) Email Address: Bacsecretariat@calabarzon.da.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: [https://notices.philgeps.gov.ph; Https://calabarzon.da.gov.ph/invitation-to-bid-page/] Date Of Issue: December 17, 2024 ______________________________________ (sgd) Engr. Romelo F. Reyes Chairperson, Bids And Awards Committee

Details: Description Item No. Item And Descriptions Quantity Unit 1 Lot Of Mobile Command And Control Vehicle (moccov) With Triage Technology Specifications: Trailer; 1 Set Trailer Dimension: L 16’ft X 6’8” Ft Trailer 40 Sq.m. Covered Area, Command Center Tent Maximum Capacity: 18 Persons Capacity: 10,000 Lbs. Multi-use Compartment For Rescue Equipment Swing Out Sink Rear/kitchen Top Tailgate Water Tank Gauge Indicator Automatic Water Pump For Faucet Reflectorized Trailer Side Markers Full Color Decal Suspension And Under Chassis Details: Round Axle With Hubs And Heavy-duty Bearings Rear Stabilizer Swivel Legs Front Stabilizer Swivel Legs Tandem Wheel And Fender With Spare Tires Front Swing/swivel Hand Jack With Tire Electromagnetic Brake System Swing Out Rear Tail Gate Dust And Waterproof Pvc Travel Cover Tent System; 1 Set Material: Wax Poly Cotton Canvas Fabric Annex 1: Mission Room Convertible To Bedroom Annex 2: Kitchen And Pantry Room Annex 3: Mission Room Annex Walls, With Extra-large Mesh Screens, Roll Down Window Cover, Poles, Pegs And Guy Ropes All Made With Heavy Duty Materials Maximum Capacity: 18 Persons Annex Walls With Extra-large Mesh Screens, Roll Down Window Cover, Poles, Pegs And Guy Ropes All In Heavy Duty Material Tent Material Is Water Repellent 3-season Tent That Can Withstand A Wind Force Of 7.5 Mph Baseline With Approximately 38 Mph Winds And Gusts Trailer Utilities; 1 Set Trailer Built-ins 150 Liters Water Tank Pump And Plumbing System Ac And Dc Power Inlet Mounted And Wash Basin Dust And Waterproof Pvc Travel Cover Portable Air-conditioning Unit Horsepower: 1 Hp Weight: 29 Kg Dimensions: 36.5 × 44.5 × 71.5 Cm Cooling Capacity: 12,600 Kj/h Power Consumption: 1100 W Applicable Area: 18-28 M 3 Units Independent Portable Toilet Material: Pp, Abs Dimension:35x42x43cm / 13.8×16.5×17" Capacity: 24l Flush Method: Press Compact Size And Lightweight Design Also Fit For Outdoor 1 Unit Toilet/shower Tent Material: Waterproof Cloth Rod: Glass Fiber Pop-up Dimension: 1.2x1.2x1.8 M With 1unit Portable Camping Shower, Rechargeable 2 Units Fuel Tank Standard: As/nzs 2906:2001 Capacity: 20l Of Fluid Spill Proof Vented Pouring Spout. Material: Uv Stabilized High Density Polyethylene 4 Units Fire Extinguisher 5lb Abc Non-toxic And Non-corrosive Chemicals Refillable Mono Ammonium Phosphate Chemical, Non-conductor, Non-toxic, Stored Pressure Equipped With Pressure Gauge, Brass Valve And Heavy-duty Air Hose With Nozzle 1 Unit Communication And Surveillance Pneumatic Mast Operation: Arc Movement + Vertical Movement Height: 10m Pan Movement: 360°gross Weight: 50 Kg Operation Platform: Arc Movement Horizontal And Vertical Rotation Speed: 6r/min Wind Resistance: 66km/h Control Way: Rs485, Pelco-d/p Agreement, Remote Control Material: Aluminum Alloy Power Supply: Dc12v-10a 1 Unit Wireless Siren Voltage: Dc 12v Output Power: 200w Siren And Microphone 1 Set Weather Station System Measurements: Hygrometer//humidity, Rainfall, Temperature, Wind Direction, Wind Speed Sensors: Anemometer, Rain & Temperature Solar-powered With Stored Energy Backup. Corrosion-proof And Can Withstand Extreme Weather Environments Has Wireless Transmission Range Of 1000 Ft. (300 M) Transmits Data Every 2.5 Seconds 1 Set Rescue Quadcopter Drone Waterproof Extended Flight Time Up To 20 Minutes Power-flip Function When Floating Flight Control Feel Tuned For Lifesaving As Well As Search And Rescue Operations 2.7k Color Camera, Remote Control Specially Designed Rescue Buoyancy Sausage Live As Well As Recorded Video Footage Payloads Up To 1.2kg 1 Set Satellite Internet Starlink; Standard Roaming Account (subscription Not Included) 1 Unit Uhf/vhf Radio Communication System Frequency Range 136-174 Mhz Or 450-520 Mhz Number Of Channels Max. 32 Channel Spacing Analog 12.5 Khz Digital 6.25 Khz Operating Voltage 13.6 V Dc ± 15% Frequency Stability ± 2.0 Ppm ± 1.0 Ppm Antenna Impedance 50 Ω Weight: 1.10 Kg 1 Set Management Laptop Intel Core I5 Ram 8gb Display: 15.6 Inches (main Display) Windows 10/11 Home/webcam/bt/wifi/cardreader/backlit Keyboard 1 Set Led Robotic Search Light Lighting Mode: Low Light, High Light, And Flashing Image Resolution: 1280 × 720 Max. Rotation Range Yaw: - 70° To + 70°, Pitch: - 135° To 45° Power Consumption: ≤ 40 W 1 Unit Ptz Perimeter Camera System Pan, Tilt, Zoom 1/2.8" Hd Progressive Scan Cmos 1920 × 1080 Resolution 25× Optical Zoom 120 Db True Wdr (wide Dynamic Range) Up To 100 M Ir Distance 3d Intelligent Positioning Switchable Tvi/ahd/cvi/cvbs Video Output 1 Unit Bullet Camera System Image Sensor 1/3" Progressive Scan Cmos Min. Illumination Color: 0.01 Lux @ (f1.2, Agc On), 0.018 Lux @ (f1.6, Agc On), 0 Lux With Ir Day & Night Ir Cut Filter Angle Adjustment: Pan: 0° To 360°, Tilt: 0° To 100°, Rotate: 0° To 360° Max. Resolution: 2688 × 1520 4 Units Cctv Nvr 8 Channel (ds-7208huhi-k1/e) Digital Video Recorder Mouse, Manual And Power Cord Remote Viewing Anytime, Anywhere Live View From Pc, Smartphone Or Tablet Turbo Hd Camera Ultra-low Light Chromatic Night Vision 1 Set Console Box Heavy Duty Case For Cctv System And Media System Laminated Water Resistant, 1 Unit All In One Pc, 2 Units 22inch Multimedia Tv With Tv Box, 1 Unit 32-inch Smart Tv, 7inch Am/fm Audio Receiver With Speakers, Wireless Keyboard And Mouse 1 Unit Step Ladder 3 Step Foldable Aluminums Ladder 1 Unit Table For Mapping Folding Half Table With Foldable Steel Legs 4ft 122 X 60 X 74cm 1 Unit White Board Magnetic White Board 30cm X 60cm 1 Unit Rescue And Triaging Foldable Rescue Boat With Outboard Motor Width (beam) When Open: 60″ 1.52mdraft: 4″ 11.4cmdepth Mid-ship: 24″ 56cmcapacity: 807 Lbs. Number Of Seats: 6material: Hard Plastic 1 Set Water Rescue Equipment. 2 Rescue Helmet, 4 D Shape Carabineer, 4 Oval Shape Carabineer, 2pairs Glove, 2 Rescue Vest, 1 Rescue Can, 1 Half Body Harness, 1 50meters 12mm Rope, 2pcs Waterproof Headlamp, 1 Carry Bag 1 Set High Angle Rescue Equipment. 2 Rescue Helmet, 4 D Shape Carabineer, 4 Oval Shape Carabineer, 2pairs Glove, 1 Half Body Harness, 1 50meters 12mm Rope, 2pcs Waterproof Headlamp, 1 Carry Bag, 1 Swing Spinner Carabiner,1 Hand Ascender Device, 1 Adjustable Foot Loop Sling, 1 Descender Rescue 8, 1 Pulley Single Sheeve, 1 Pulley Double Sheave 1 Set Automated External Defibrillator Protocol: Semiautomatic And Fully Automatic Configuration Defibrillator Charge Hold Time: 30 Seconds. Aed 3 Automatic Model: 3 Seconds Prior To Automatic Shock Delivery Energy Selection: Factory Pre-programmed Selection Patient Safety: All Patient Connections Are Electrically Isolated Size: (h X W X D) 12.7 Cm X 23.6 Cm X 24.7 Cm. 5.0 In X 9.3 In X 9.7 In Weight: 2.5 Kg; 5.5 Lbs. (with Battery) 1 Unit Emergency And Trauma Bag. 1 Btl Alcohol 150ml 1 Btl Betasol Povidone 60ml 1 Btl Hydrogen Peroxide 60ml 1pc. Tourniquet 1 Set Oxygen Tank W/ Regulator 1 Pc. Emergency Blanket 1 Pc. Arm Splint / Sam Splint 1 Pc. Leucoplast ½ 1pc. Cpr Mask Surgi-tech 1 Pc. Cervical Collar 1 Pc. Triangular Bandage 1 Pc. Hot And Cold Pack 160g Surgi-tech 1 Pc. Digital Thermometer Advan 1 Btl Dextrose Partners 1 Pc. Iv Tubing Surgi-tech 1 Pc. Iv Cath G.24 1 Pc. Cosmed Butterfly G.23 1 Pc. Pulse Oximeter 1 Set Ambu Bag Pvc 1 Pc. Pen Light Indoplas 1 Set Blood Pressure / Bp Set 1 Pc. Kelly Forceps Straight 1 Pc. Surgical Scissor Straight 1 Set Foldable Military Spec Medical Beds Material: High-grade Aluminum Foldable Product Size: 194 X 66 X 41cmfolded Size: 90 X 12 X 20cmweight: 9.5kgload Bearing: Less Than 159kg 5 Units Jack 3-ton Crocodile Jack 1 Unit Rescue Axe Gross Weight: 32oz Or 910g Length: 15" Or 38cm Carbon Steel Head Dual Fiberglass Handle Rubberized Grip 1 Unit Bolt Cutter Size: 12" Max. Cutting Size: 5mm Cr-v Blade 1 Unit Hi-lift Responder Jack Material: Cast Iron Steel Size: 42” Leverage: 4660 Lbs. 1 Unit Medical Stretcher Product Size (length*width*height): 214*54*13cm Foldable 1 Unit Shovel Full Length: 42cm Spade Width: 10cm Shovel Length: 12.5cm Pick Length: 11cm 1 Unit Power Supply And Electronics Jump Starter/power Bank Ce/rohs/emc Battery Capacity:15000mah Input: 14/a Output:5v/4a; 12v/12a; 19v/3.5a Charging Time: 5 Hours Start Current: 300a Peak Current: 600a 1 Unit Solar Power Generator System Rated Power: 200w Rated Voltage (vmp): 18v Rated Current (imp): 3.34a Open-circuit Voltage: 21.6v Short-circuit Current: 3.64a Number Of Cells: 36 Cell Type: Poly-crystalline Silicon Glass Type: High Transmission, Low Iron, Tempered Glass, Glass Thickness Of Glass: 3.2mm 1 Set Wind Power Generator System - Material: Nylon Fiber - Blade Length：600mm - Wind Wheel Diameter:900mm - Weight:12.5kg - Rated Power: 400w - Starting Wind-speed: 12m/s - Rated Voltage: 12/24vr 1 Unit Generator Set Power Inlet Mounted220-240vopen Type Generator Starting System: Recoil/electrical Starting Alternator Material: 100% Cu Frequency (hz): 60voltage(v): 120-240rated Output (kw): 8max Output (kw): 8thd (%): 25running Time At 50% Loading(h): 8.5fuel Tank Size(l): 21noise Db(a): 97insulation Grade: F 1 Unit 220v Backup Inverter Power System 3000 Watts Power Inverter Dc Charging System Output Voltage: 220v (+-) 10% Output Frequency: 60hz (+-) 2 Output Wave Form: Modified Sine Wave Peak Efficiency: 65% 1 Unit Battery Bank Power Supply 100ah X 4 (total Capacity= 400ah) Lithium Ion Battery 1 Unit Training - Seminar Technical Seminar Training For Ingress And Digress Of Trailer-tent System Gain Knowledge Of Equipment And Its Specifications Proper Handling And Proper Use Of Tools And Equipment's Ergonomic Placement Of Equipment Individual Seminar Training And Testing Of Each Individual For A Specific Role Ex: Basic Drone Pilot Training, Cctv Controller Etc. Note: Caap Certification Not Included Team Seminar Conducting Team For Ground Training And Actual Response Action Efficient Ingress And Digress Of Mocov Synchronization Of Individual And Their Roles At A Specific Time Of Action Tool Set 82 Pcs Tool Set 1 Set Cook Set 6 Persons Cook Set 1 Set Portable Stove 2 Burner Portable Butane Stove 1 Unit Vehicle Modified 4x4 Xl Ford Ranger 2024 Or Its Equivalent Or Better Powertrain 4x4 Drivetrain 2.0l Turbo Diesel Maximum Power 170hp @ 3,500maximum Torque 405nm @ 1,750-2500 Rpm6-speed Manual Transmission Chassis & Suspension Front Suspension Double Wishbone With Coil Springs Rear Suspension Leaf Spring Front Ventilated Discs/rear Drum Wheels & Tires16" Off-road Mag-wheels 255 / 70r 16 Tires Accessories: Snorkel Led Bar Light, Roof Tray, Led Emergency Strobe Light Bar, Load Plus (suspension), Tow Hitch Set 1 Lot Notes: 1. All Items Should Be Supplied, Delivered And Installed On-site As Designated By The End-user Unit. 2. Mobile Command And Control Vehicle With Triage Technology And Its Accessories Should Be Accredited Or Recognized From Department Of Science And Technology (dost) Or Any Appropriate Government Agencies. 3. Vehicle Inclusions: Lto Registration – 3years, Ctpl-3years, Insurance With Aog – 1 Year, With Logo Of The Municipality (pintuyan). 4. Product Warranty Certificates For Vehicle. 5. Product Warranty Certificates For Equipment, Devices And Accessories Not Less Than One (1) Year. 6. Trainings For Operators Of All Equipment, Devices And Accessories And Corresponding Seminars For Conducting Team Shall Be Formed Part Of The Contract.

Details: The Work For This Project Includes, But Is Not Limited To, P-614 Joint Consolidated Communications Center Facility At Andersen Air Force Base, Guam. This Project Consolidates The Andersen Air Force Base Communications, Command And Control, Computer, Intelligence/information Technology (c4i/it) Functions Into A Resilient And Diverse Open Architecture Solution By Construction Of A New, Two-story, Reinforced Concrete Communications Center And Administrative Support Space For The 36th Communications Squadron (36cs). Work To Include Electrical, Mechanical, Water, Communication, Fire Suppression/detection, Air Conditioning System With Humidity Environmental Controls, Utilities, Pavements, Security, Parking, Associated Site Improvements, And All Necessary Supporting Facilities For A Complete And Usable Facility. Special Features Include Sensitive Compartmented Information Facility Construction Work In Accordance With Icd/ics 705 And Incidental Related Work. Secure Facility Construction Shall Be Performed By U.s. Companies Using U.s. Citizens. the Magnitude Of This Project Is Estimated Between $100,000,000 And $250,000,000. The North American Industry Classification System (naics) Code Is 236220 And Average Annual Receipts Of $45 Million Over The Past Three Years. The Contract Completion Period Is Anticipated To Be 1,286 Calendar Days. a Sources Sought Notice (n62742-25-s-1303) For This Procurement Was Posted On 22 August 2024 On The System For Award Management (sam) Website Https://www.sam.gov/, And A Market Survey Was Conducted That Included An Assessment Of Relevant Qualifications And Capabilities Of Potentially Qualified Firms. As A Result Of The Market Research Analysis, A Determination Was Made To Solicit This Procurement On An Unrestricted Basis Inviting Full And Open Competition. The Navfac Pacific Small Business Office Concurs With This Decision. this Is An Lpta Source Selection Procurement. The Government Intends To Evaluate Proposals And Award A Contract Without Discussions With Offerors (except Clarifications As Described In Far 15.306 (a)). Therefore, The Initial Proposal Shall Conform To The Solicitation Requirements And Should Contain The Best Offer From A Technical And Price Standpoint Based On The Following Factors: Factor 1 – Experience, Factor 2 – Past Performance, And Factor 3 – Safety. Proposals Submitted In Response To This Solicitation Shall Be In The English Language And In U.s. Dollars. only The Three (3) Lowest-priced Proposals Will Be Evaluated For Fair And Reasonable Pricing And Technical Acceptability. If None Of The Three (3) Lowest-priced Proposals Are Found To Be Technically Acceptable, Then The Next Three (3) Lowest-priced Proposals Will Be Evaluated For Technical Acceptability. If None Of The Six (6) Lowest Priced Proposals Are Found To Be Technically Acceptable, Then All Remaining Proposals Will Be Evaluated For Technical Acceptability. the Government Intends To Select The Lowest Reasonably Priced Technically Acceptable Offer And Award A Contract (within The Funds Available) Without Conducting Discussions. a Relevant Construction Project Is Defined As A Construction Project That Includes At Least One Of The Following Individual Features: precision Cooling System. New Construction Of A Chiller Type Technology Cooling System Engineered Specifically For Data Center/electronic/it Networking Environments. Projects Submitted Which Reference Comfort Cooling Systems Which Are Engineered Primarily For The Intermittent Use Required To Maintain A Comfortable Environment For People In Facilities Will Not Be Considered. Projects Submitted To Demonstrate Precision Cooling System Will Only Be Considered If The Work Was Performed By The Specific Entity Proposed For The Precision Cooling System Under The Resultant Contract, As Identified In Block 1 Of Attachment A. uninterruptable Power Supply System. New Construction Of An Uninterruptible Power Supply (ups) System That Is 225 Kva Size Or More. Projects Submitted To Demonstrate Ups System Experience Will Only Be Considered If The Work Was Performed By The Specific Entity Proposed For The Ups System, As Identified In Block 1 Of Attachment A. clean Agent Fire Suppression System. New Construction Or Replacement Of A Clean Agent Fire Extinguishing System And Releasing System, Including All Mechanical, Controls And Electrical Components Necessary For A Complete And Operating Clean Agent Fire Suppression System. Projects Submitted To Demonstrate Clean Agent Fire Suppression System Experience Will Only Be Considered If The Work Was Performed By The Specific Entity Proposed For The Clean Agent Fire Suppression System, As Identified In Block 1 Of Attachment A. 1. Projects Submitted To Demonstrate Relevant Construction Individual Features (1) Precision Cooling System, (2) Uninterruptable Power Supply System, And (3) Clean Agent Fire Suppression System, Will Only Be Considered If The Work Was Performed By The Specific Entity Proposed To Perform That Type Of Work In This Contract. 2. If The Offeror Self-performed The Relevant Construction Individual Features (1) Precision Cooling System, (2) Uninterruptable Power Supply System, And (3) Clean Agent Fire Suppression System, Then The Offeror Must Confirm That It Will Self-perform The Same Relevant Individual Feature(s) In Order To Be Considered. If Offeror Does Not Intend To Self-perform, See Note 9 About Teaming Arrangements. 3. Projects Submitted Shall Collectively Demonstrate Experience In All Three (3) Individual Features: (1) Precision Cooling System, (2) Uninterruptable Power Supply System, And (3) Clean Agent Fire Suppression System. Failure To Demonstrate Experience In All Three (3) Individual Features Shall Be Considered A Deficiency And An Unacceptable Rating Will Be Assigned For This Factor. All Individual Features, Or Multiple Individual Features, Do Not Have To Be Within Any Single Project Scope. 4. Relevant Projects Shall Have Been Completed Or Substantially Completed Within The Last Ten (10) Years Of The Date Of Issuance Of The Rfp. “substantially Complete” Is Defined As At Least 90% Physically Completed Construction. 5. Building Alteration, Repair, Renovation, Conversion, And Addition Work Will Not Be Considered As Relevant Projects. 6. A Relevant Construction Project Is Further Defined As A Construction Project Performed Under A Single Task Order Or Contract. For Multiple Award And Indefinite Delivery/indefinite Quantity Type Contracts, The Contract As A Whole Shall Not Be Submitted As A Project; Rather Offerors Shall Submit The Work Performed Under A Task Order As A Distinct Project. For Example, Multiple Task Orders Under A Multiple Award And Indefinite Delivery/indefinite Quantity Type Contracts That Demonstrate Experience In One Or More Of The Desired Individual Features Describe Above Shall Be Submitted As A Distinct Project, Rather Than Submitting All Task Orders Under A Multiple Award And Indefinite Delivery/indefinite Quantity Type Contracts As A Single Project. the Request For Proposal (rfp) Will Be Available On Or Around 30 January 2025. There Are Two Volumes Of Specifications And Drawings Issued For This Rfp. Volume 1 For The Construction Of The Entire Facility, And Volume 2 Is For The Construction Of A Secure Space Within The Facility. Consequently, The Volume 2 Specifications And Drawings Are Marked “controlled Unclassified Information” And Will Only Be Released To The U.s. Citizens Of U.s. Firms. volume 2 Will Only Be Released As An Amendment To U.s. Citizens Of A U.s. Firm Attachment (1). All Contractor Personnel Handling And Accessing The Volume 2 Documents Must Be Vetted As A U.s. Citizen Prior To Receiving Any Volume 2 Documents. To Determine Eligibility For Receipt Of Volume 2 Rfp Documents, Each Interested Firm Shall Complete And Submit A U.s. Firm Certification, Attachment (1). All Sources, Whether Prime Offerors Or Subcontractors At All Tiers, Must Certify That It Is A U.s. Firm. Once A Favorable U.s. Firm Determination Has Been Made, All Individuals Of The Approved U.s. Firm Requiring Access To The Rfp Documents Shall Complete And Submit: (1) Certification Of U.s. Citizen (attachment 2) (2) Proof U.s. Citizenship (3) Signed Non-disclosure Agreement (attachment 3) a List Of Acceptable Documents For Proof Of U.s. Citizenship Is Provided In Attachment (2). The Completed Forms Shall Be Submitted To Ms. Merbby Corpuz At Merbbyjoyce.n.corpuz.civ@us.navy.mil And Ms. Janie Garza At Juanita.i.garza2.civ@us.navy.mil. Offerors Are Encouraged To Submit The Required Documents As Soon As Possible. the Rfp, Including The Specifications And Drawings, Can Be Accessed By Approved Individuals Via The Sam Website At Https://sam.gov/. Approved Individuals Must Register At The Sam Website To Obtain Access To The Rfp. Registration Instructions Can Be Found On The Sam Website. Once Registered In Sam, Approved Individuals Must Request Explicit Access To View The Documents. An Email Will Be Forwarded Once The Contracting Office Has Approved Or Declined The Request. Approved Individuals May View And/or Download The Volume 2 Rfp Documents. The Navfac Drawings And Specifications Are Marked "controlled Unclassified Information"; Therefore, The Navfac Drawings And Specifications Are Considered "covered Defense Information.” Amendments Will Also Be Posted At Https://sam.gov/. It Is Highly Recommended That Firms Register On The Sam Website As This Will Be The Only Plan Holder’s List Available. It Is The Offeror’s Responsibility To Check The Sam Website Periodically For Any Amendments To The Solicitation. offerors Are Required To Be Registered In The Sam Database At Https://www.sam.gov At The Time Of Proposal Submission. note: The Prime Contractor Shall Designate A Primary Point-of-contact Who Will Be Responsible For Managing And Submitting The Required Forms And Proof Of U.s. Citizenship For Its Employees And Subcontractor/supplier Firms And Its Employees To A Liaison With The Government. Forms Shall Be Submitted In Alphabetical Order First By Firm Name And Then Alphabetically By Last Name Of Individuals Of The Firm. Also, A List Of Personnel For Each Shall Be Submitted. a One-time Pre-proposal Site Visit Is Scheduled For 27 February 2025, 9:00 A.m., Chamorro Standard Time (chst). This Pre-proposal Site Visit Is To Provide Offerors With An Opportunity To Familiarize Themselves With The Jobsite And Conditions To Be Encountered And Is Not For The Purpose Of Answering Questions. Offerors Interested In Attending The Site Visit Shall Submit The Following Forms: base Access Request – Contractor Memo (fill-in Information In Red). iii Log (complete In Accordance With The Attached “how To Fill Out The Iii Log” Instructions Located At The End Of This Document.) base Access Affidavit 2020 (completed For Each Visitor That Does Not Have Dbids Pass) foreign National Access Request Form contractor Policy Update Memo either A U.s. Passport Or Real Id Act Driver’s License/id the Completed Forms Shall Be Submitted To Ms. Merbby Corpuz At Merbbyjoyce.n.corpuz.civ@us.navy.mil And Ms. Janie Garza At Juanita.i.garza2.civ@us.navy.mil On Or Before 06 February 2025, 2:00 P.m., Hawaii Standard Time (hst). Once Approved For Base Access, A Tracking Number Will Be Emailed To The Attendees For Use When Obtaining Base Passes At The Visitor Control Center (northgate), Andersen Air Force Base. please Be Informed: The Visitor Control Center (northgate) Requires Sufficient Processing Time For Each Visitor. Consequently, If An Attendee Submits The Application Forms After The Specified Due Date And Time, The Attendee May Not Be Able To Attend The Site Visit. the Furnishing Of The Above Information, Including Your Social Security Number, Is Voluntary. However, Your Failure To Furnish All Or Part Of The Information Request May Result In The Government's Denial Of Access To The Jobsite. Any Of The Above Information Furnished By You And Protected Under The Privacy Act Shall Not Be Released Unless Permitted By Law And/or You Have Consented To Such Release. upon Receipt Of The Above Information, Our Office Will Submit A Letter To The Pass And Id Office Authorizing Your Entrance. on The Day Of The Visit, Attendees Shall Meet Promptly At The Pacific Regional Training Center (prtc) Gate And Bring Necessary Base Access Pass, The “iii Log” And “new Contractor Letter Memorandum” To The Site Visit. For Those That Do Not Have Dbids, Pick Up An Approved Day Pass From The Visitor’s Center (northgate). Attendees Shall Meet At The Visitor Control Center Overflow Parking Lot.