Fiber Tenders

Details: The Purpose Of This Sources Sought Notice Is To Conduct Market Research And Identify Potential Sources Of Commercial Products/services That Satisfy The Government’s Anticipated Needs. background the National Institute Of Standards And Technology (nist), Gaithersburg 731.07 Group Within The Engineering Laboratory Is Seeking An Extreme Thermal Cycling Chamber To Perform Accelerated Aging Experiments As Part Of A Study Of Long-term Reliability Of Materials Used In Advanced Packaging Of Semiconductor Chips. This Work Is In Support Of The Chips Metrology Program. the Chips Metrology Program Develops And Advances Cutting Edge Metrology Capabilities For Members Of The Us Semiconductor Manufacturing Ecosystem. This Nist Conducted Research Program Works With Device Manufacturers, Tool Vendors, Materials Suppliers, And Other Organizations To Address Critical Metrology Gaps To Spur Innovation Within Seven Grand Challenge Areas. For More Information On Chips Metrology, Please Visit Https://www.nist.gov/chips/research-development-programs/metrology-program nist Is Seeking Information From Sources That May Be Capable Of Providing A Solution That Will Achieve The Objectives Described Above, In Addition To The Following Essential Requirements: sample Types And Sizes samples Will Include Films, Multilayered Film Structures, And Sectioned Wafers materials To Be Aged Will Include Polymeric Components In Advanced Packaging, Including Underfill And Encapsulation Epoxies, Fiber Reinforced Polymer Substrates, Along With Thermal Interface Materials, Filler Components, Treated Substrates. These Materials May Be Standalone Films, Combined Into Multilayered Composites, Or Combined Into Assembled Semiconductor Structures As Part Of A Fabricated Test Vehicle. largest Sample Size Is Expected To Be A 300 Mm Wafer. thermal Cycling oven Must Provide A Wide Temperature Range Of At Least -100 °c To 200 °c. oven Must Also Provide Rapid Thermal Cycling With Thermal Ramp Rates Of At Least 70°c/min. Provide The Thermal Cycling Rate Along With Whether The Ramp Rate Can Be Controlled/modified. thermocouple Must Be Included. Provide The Number Of Thermocouples, Their Location, And The Temperature Accuracy Of The Oven. wire Port sample Degradation Will Be Monitored During Thermal Aging. This Will Require A Pass-through Port To Allow For Monitoring Cables To Be Fed Through The Oven. The Pass-through Port Must Be 2-3” In Diameter. Multiple Pass-through Ports Of Smaller Size Will Also Be Considered. Provide These Details. how To Respond To This Notice in Responding To This Notice, Please Do Not Provide Proprietary Information. Please Include Only The Following Information, Readable In Either Microsoft Word 365, Microsoft Excel 365, Or .pdf Format, In The Response: Submit The Response By Email To The Primary Point Of Contact And, If Specified, To The Secondary Point Of Contact Listed In This Notice As Soon As Possible, And Preferably Before The Closing Date And Time Of This Notice. Please Note That To Be Considered For Award Under Any Official Solicitation, The Entity Must Be Registered And “active” In Sam At The Time Of Solicitation Response. provide The Complete Name Of Your Company, Address, Name Of Contact For Follow-up Questions, Their Email, Their Phone Number And, If Your Company Has An Active Registration In Https://sam.gov, Your Company’s Unique Entity Id (uei). identify The Equipment That Your Company Sells That Can Meet The Objectives Addressed In The Background Section Of This Notice. For Each Product Recommended To Meet The Government’s Requirement, Provide The Following: manufacturer Name model Number technical Specifications if Your Company Is Not The Manufacturer, Provide Information On Your Company’s Status As An Authorized Reseller Of The Product(s) describe Performance Capabilities Of The Product(s) Your Company Recommends To Meet The Government’s Requirements. Additionally, If There Are Other Features Or Functions That You Believe Would Assist Nist In Meeting Its Objectives Described Above, Please Discuss In Your Response. discuss Whether The Equipment That Your Company Sells And Which You Describe In Your Response To This Notice May Be Customized To Specifications And Indicate Any Limits To Customization. identify Any Aspects Of The Nist Market Research Notice, Including Instructions, And Draft Minimum Specifications In The Background Section You Cannot Meet And State Why. Please Offer Suggestions For How The Market Research Notice And Draft Minimum Specifications Could Be Made More Competitive. state Whether The Proposed Equipment Is Manufactured In The United States And, If Not, State The Name Of The Country Where The Equipment Is Manufactured. identify Any Plans/possibilities For Changes In Manufacturing Location Of The Aforementioned Equipment And Provide Relevant Details, Including Timeline. for The Naics Code Listed In This Notice: indicate Whether Your Company Is (a) A Small Business Or (b) Other Than Small Business. See The Table Of Small Business Size Standards And The Associated .pdf Download File For Small Business Size Standards And Additional Information. if You Believe The Naics Code Listed In This Notice Is Not The Best Naics Code For The Type Of Product Addressed In This Notice, Identify An Alternative Naics Code That You Believe Would Be More Appropriate For The Planned Procurement. describe Services That Are Available With The Purchase Of The Aforementioned Equipment From Your Company Such As Installation, Training, And Equipment Maintenance. describe Standard Terms And Conditions Of Sale Offered By Your Company For The Recommended Equipment Such As: Delivery Time After Your Company Accepts The Order; Fob Shipping Terms; Manufacturer Warranty (including Details Regarding Nature And Duration); If Available, Description(s) Of Available Extended Warranty; Equipment Setup And Test; Operator And Service Instruction Manual(s); Cleanup After Installation; And If Applicable, Other Offered Services. Provide A Copy Of Manufacturer Standard Terms And Conditions That Typically Relate To The Sale Of The Specified Equipment, If Available. state Whether Your Company Offers Facility Renovation Services Related To Installation Of The Recommended Equipment At Its Delivery Destination, If Required Per The Nist-identified Minimum Specifications, And Provide Description Of Said Services. Indicate If Your Company Performs The Facility Renovation Services Or Typically Subcontracts The Work To Another Company. Indicate If Your Company Would Be Interested In Inspecting The Intended Installation Site During The Market Research Phase. state Published Price, Discount, Or Rebate Arrangements For Recommended Equipment And/or Provide Link To Access Company’s Published Prices For Equipment And Services. if The Recommended Equipment And Related Services Are Available For Purchase On Any Existing Federal Supply Schedule Contract(s) Or Other Contracts Against Which Nist May Be Able To Place Orders, Identify The Contract Number(s) And Other Relevant Information. identify Any Customers In The Public Or Private Sectors To Which You Provided The Recommended Or Similar Equipment. Include Customer(s) Information: Company Name, Phone Number, Point Of Contact, Email Address. provide Any Other Information That You Believe Would Be Valuable For Nist To Know As Part Of Its Market Research For This Requirement. state If You Require Nist To Provide Additional Information To Improve Your Understanding Of The Government’s Requirement And/or Would Like To Meet With Nist Representatives To Discuss The Requirement And The Capabilities Of The Identified Equipment. questions Regarding This Notice questions Regarding This Notice May Be Submitted Via Email To The Primary Point Of Contact And The Secondary Point Of Contact Listed In This Notice. Questions Should Be Submitted So That They Are Received 5 Calendar Days Prior To The Response Date. If The Contracting Officer Determines That Providing A Written Amendment To This Notice To Document Question(s) Received Would Benefit Other Potential Respondents, The Questions Would Be Anonymized, And A Written Response To Such Question(s) Would Be Provided Via An Amendment To This Notice. important Notes this Notice Is For Market Research Purposes And Should Not Be Construed As A Commitment By Nist To Issue A Solicitation Or Ultimately Award A Contract. There Is No Solicitation Available At This Time. this Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. nist Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization’s Capability. respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. after A Review Of The Responses Received, A Synopsis And Solicitation May Be Published On Gsa’s Ebuy Or Sam.gov. However, Responses To This Notice Will Not Be Considered An Adequate Response To Any Such Solicitation(s). thank You For Taking The Time To Submit A Response To This Request!

Details: The Purpose Of This Sources Sought Notice Is To Conduct Market Research And Identify Potential Sources Of Commercial Products/services That Satisfy The Government’s Anticipated Needs. background the National Institute Of Standards And Technology (nist), Gaithersburg 731.07 Group Within The Engineering Laboratory Is Seeking A Laboratory Oven Capable To Perform Accelerated Aging Experiments As Part Of A Study Of Long-term Reliability Of Materials Used In Advanced Packaging Of Semiconductor Chips. This Work Is In Support Of The Chips Metrology Program. the Chips Metrology Program Develops And Advances Cutting Edge Metrology Capabilities For Members Of The Us Semiconductor Manufacturing Ecosystem. This Nist Conducted Research Program Works With Device Manufacturers, Tool Vendors, Materials Suppliers, And Other Organizations To Address Critical Metrology Gaps To Spur Innovation Within Seven Grand Challenge Areas. For More Information On Chips Metrology, Please Visit Https://www.nist.gov/chips/research-development-programs/metrology-program nist Is Seeking Information From Sources That May Be Capable Of Providing A Solution That Will Achieve The Objectives Described Above, In Addition To The Following Essential Requirements: sample Types And Sizes samples Will Include Films, Multilayered Film Structures, And Sectioned Wafers materials To Be Aged Will Include Polymeric Components In Advanced Packaging, Including Underfill And Encapsulation Epoxies, Fiber Reinforced Polymer Substrates, Along With Thermal Interface Materials, Filler Components, Treated Substrates. These Materials May Be Standalone Films, Combined Into Multilayered Composites, Or Combined Into Assembled Semiconductor Structures As Part Of A Fabricated Test Vehicle. largest Sample Size Is Expected To Be A Sectioned 300 Mm Wafer. thermal Range oven Must Provide Temperature Up To At Least 300 °c. thermocouple Must Be Included. Provide The Number Of Thermocouples, Their Location, And The Temperature Accuracy Of The Oven. indicate How Many Shelves Are Included In The Unit Along With Sizing. wire Port sample Degradation Will Be Monitored During Thermal Aging. This Will Require A Pass-through Port To Allow For Monitoring Cables To Be Fed Through The Oven. The Pass-through Port Must Be 2-3” In Diameter. Multiple Pass-through Ports Of Smaller Size Will Also Be Considered. Provide These Details. how To Respond To This Notice in Responding To This Notice, Please Do Not Provide Proprietary Information. Please Include Only The Following Information, Readable In Either Microsoft Word 365, Microsoft Excel 365, Or .pdf Format, In The Response: Submit The Response By Email To The Primary Point Of Contact And, If Specified, To The Secondary Point Of Contact Listed In This Notice As Soon As Possible, And Preferably Before The Closing Date And Time Of This Notice. Please Note That To Be Considered For Award Under Any Official Solicitation, The Entity Must Be Registered And “active” In Sam At The Time Of Solicitation Response. provide The Complete Name Of Your Company, Address, Name Of Contact For Follow-up Questions, Their Email, Their Phone Number And, If Your Company Has An Active Registration In Https://sam.gov, Your Company’s Unique Entity Id (uei). identify The Equipment That Your Company Sells That Can Meet The Objectives Addressed In The Background Section Of This Notice. For Each Product Recommended To Meet The Government’s Requirement, Provide The Following: manufacturer Name model Number technical Specifications if Your Company Is Not The Manufacturer, Provide Information On Your Company’s Status As An Authorized Reseller Of The Product(s) describe Performance Capabilities Of The Product(s) Your Company Recommends To Meet The Government’s Requirements. Additionally, If There Are Other Features Or Functions That You Believe Would Assist Nist In Meeting Its Objectives Described Above, Please Discuss In Your Response. discuss Whether The Equipment That Your Company Sells And Which You Describe In Your Response To This Notice May Be Customized To Specifications And Indicate Any Limits To Customization. identify Any Aspects Of The Nist Market Research Notice, Including Instructions, And Draft Minimum Specifications In The Background Section You Cannot Meet And State Why. Please Offer Suggestions For How The Market Research Notice And Draft Minimum Specifications Could Be Made More Competitive. state Whether The Proposed Equipment Is Manufactured In The United States And, If Not, State The Name Of The Country Where The Equipment Is Manufactured. identify Any Plans/possibilities For Changes In Manufacturing Location Of The Aforementioned Equipment And Provide Relevant Details, Including Timeline. for The Naics Code Listed In This Notice: indicate Whether Your Company Is (a) A Small Business Or (b) Other Than Small Business. See The Table Of Small Business Size Standards And The Associated .pdf Download File For Small Business Size Standards And Additional Information. if You Believe The Naics Code Listed In This Notice Is Not The Best Naics Code For The Type Of Product Addressed In This Notice, Identify An Alternative Naics Code That You Believe Would Be More Appropriate For The Planned Procurement. describe Services That Are Available With The Purchase Of The Aforementioned Equipment From Your Company Such As Installation, Training, And Equipment Maintenance. describe Standard Terms And Conditions Of Sale Offered By Your Company For The Recommended Equipment Such As: Delivery Time After Your Company Accepts The Order; Fob Shipping Terms; Manufacturer Warranty (including Details Regarding Nature And Duration); If Available, Description(s) Of Available Extended Warranty; Equipment Setup And Test; Operator And Service Instruction Manual(s); Cleanup After Installation; And If Applicable, Other Offered Services. Provide A Copy Of Manufacturer Standard Terms And Conditions That Typically Relate To The Sale Of The Specified Equipment, If Available. state Whether Your Company Offers Facility Renovation Services Related To Installation Of The Recommended Equipment At Its Delivery Destination, If Required Per The Nist-identified Minimum Specifications, And Provide Description Of Said Services. Indicate If Your Company Performs The Facility Renovation Services Or Typically Subcontracts The Work To Another Company. Indicate If Your Company Would Be Interested In Inspecting The Intended Installation Site During The Market Research Phase. state Published Price, Discount, Or Rebate Arrangements For Recommended Equipment And/or Provide Link To Access Company’s Published Prices For Equipment And Services. if The Recommended Equipment And Related Services Are Available For Purchase On Any Existing Federal Supply Schedule Contract(s) Or Other Contracts Against Which Nist May Be Able To Place Orders, Identify The Contract Number(s) And Other Relevant Information. identify Any Customers In The Public Or Private Sectors To Which You Provided The Recommended Or Similar Equipment. Include Customer(s) Information: Company Name, Phone Number, Point Of Contact, Email Address. provide Any Other Information That You Believe Would Be Valuable For Nist To Know As Part Of Its Market Research For This Requirement. state If You Require Nist To Provide Additional Information To Improve Your Understanding Of The Government’s Requirement And/or Would Like To Meet With Nist Representatives To Discuss The Requirement And The Capabilities Of The Identified Equipment. questions Regarding This Notice questions Regarding This Notice May Be Submitted Via Email To The Primary Point Of Contact And The Secondary Point Of Contact Listed In This Notice. Questions Should Be Submitted So That They Are Received 5 Calendar Days Prior To The Response Date. If The Contracting Officer Determines That Providing A Written Amendment To This Notice To Document Question(s) Received Would Benefit Other Potential Respondents, The Questions Would Be Anonymized, And A Written Response To Such Question(s) Would Be Provided Via An Amendment To This Notice. important Notes this Notice Is For Market Research Purposes And Should Not Be Construed As A Commitment By Nist To Issue A Solicitation Or Ultimately Award A Contract. There Is No Solicitation Available At This Time. this Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. nist Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization’s Capability. respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. after A Review Of The Responses Received, A Synopsis And Solicitation May Be Published On Gsa’s Ebuy Or Sam.gov. However, Responses To This Notice Will Not Be Considered An Adequate Response To Any Such Solicitation(s). thank You For Taking The Time To Submit A Response To This Request!

Details: Description No "item Description (item Name & Technical Specifications)" Qty. Unit Unit Cost Approved Budget Of Contract (abc) 1 Portland Cement 27 Bag 295.00 7,965.00 2 Crushed Gravel G-1" 0.75 Cu.m 1,850.00 1,387.50 3 Crushed Gravel 3/4" 1.75 Cu.m 1,850.00 3,237.50 4 Washed Sand 3.25 Cu.m 1,850.00 6,012.50 5 Deformed Round Bars, 10mm 49 Pcs 168.00 8,232.00 6 G.i. Tie Wire 11 Kg 90.00 990.00 7 Coco Lumber (2"x2"x12") 18 Pcs 142.00 2,556.00 8 Plywood Ordinary, 1/4" X 4' X 8' 3 Pcs 390.00 1,170.00 9 Cwn, Assorted 3 Kg 85.00 255.00 10 Concrete Hollow Blocks (6" Thick) 125 Pcs 27.50 3,437.50 11 50x75x1.2mm C-purlins 3 Pcs 750.00 2,250.00 12 50mmx100mmx2mm Thk Tubular 2 Pcs 936.00 1,872.00 13 100mmx100mmx2mm Thk Tubular 1 Pcs 2,250.00 2,250.00 14 L 50x 50x2mm 1 Pcs 480.00 480.00 15 Expansion Bolt 24 Pcs 46.00 1,104.00 16 Mechanical Bolt A325(16mmø X 100mm) 8 Pcs 78.00 624.00 17 Welding Rod 4 Kg 175.00 700.00 18 G.i. Long-span Roofing, Corrugated, Pre Painted, 120mm X 0.5 Mm Bmt 17 Lm 580.00 9,860.00 19 G.i. Flashing, Pre-painted, 1220mm X 0.5mm Bmt 3 Pcs 650.00 1,950.00 20 Teckscrew 2-1/2" 276 Pcs 3.50 966.00 21 Roof Sealant 1 L 600.00 600.00 22 Fascia Board, Fiber Cement 8" X 8' 8 Pcs 390.00 3,120.00 23 Faucet, Hose Bibb, Brass 1/2"ø 7 Pcs 195.00 1,365.00 24 Pp-r Pipe 1"ø X 4.0m 3 Pcs 550.00 1,650.00 25 Pp-r Coupling, 1"ø 7 Pcs 35.00 245.00 26 Pp-r Elbow 90˚ X 1"ø 5 Pcs 50.00 250.00 27 Pp-r Cross Tee Reducer, 1" X 1/2"ø 7 Pcs 37.00 259.00 28 Pp-r Tee Reducer, 1" X 1/2"ø 2 Pcs 29.00 58.00 29 Female Adaptor 1/2"ø 7 Pcs 25.00 175.00 30 Pp-r End Cap, 1"ø 1 Pcs 23.00 23.00 31 Gate Valve, 1"ø 1 Pcs 750.00 750.00 32 Teflon Tape 6 Roll 45.00 270.00 33 Pvc Sanitary Pipe 4"ø X 3.0m 4 Pcs 660.00 2,640.00 34 Pvc Sanitary Pipe 2"ø X 3.0m 4 Pcs 325.00 1,300.00 35 Pvc Sanitary Wye 4" X 4" 1 Pcs 190.00 190.00 36 Pvc Sanitary Wye Reducer 4"x2" 4 Pcs 105.00 420.00 37 Pvc Sanitary Wye 2"x2" 2 Pcs 65.00 130.00 38 Pvc Sanitary Elbow 1/8 X 2"ø 9 Pcs 45.00 405.00 39 Pvc Sanitary Elbow 1/8 X 4"ø 1 Pcs 110.00 110.00 40 Pvc Sanitary Elbow 90" X 2"ø 8 Pcs 50.00 400.00 41 Pvc Sanitary Tee 2" X 2" 7 Pcs 60.00 420.00 42 Brass Cleanout 4" X 4" 1 Pcs 385.00 385.00 43 Pvc P-trap 2" 4 Pcs 105.00 420.00 44 S.s. Floor Drain 4" X 4" 4 Pcs 150.00 600.00 45 Pvc Cement 4 Can 230.00 920.00 46 Neutralizer 1 Gal 350.00 350.00 47 Latex, Flat 1 Gal 850.00 850.00 48 Masonry Putty 1 Gal 500.00 500.00 49 Latex, Semi Gloss 1 Gal 740.00 740.00 50 Acri Color 1 Qrt 275.00 275.00 51 Primer, Zinc Chromate 2 Gal 875.00 1,750.00 52 Granite Tiles 60cm X 60cm 23 Pcs 175.00 4,025.00 53 Tile Adhesive 25 Kg/bag 2 Bag 350.00 700.00 54 Tile Grout 5 Kg/bag 1 Bag 175.00 175.00 55 Granite Tiles 40cm X 40cm 30 Pcs 175.00 5,250.00 56 Tile Adhesive 25 Kg/bag 2 Bag 350.00 700.00 57 Tile Trim 6mm 3 Pcs 110.00 330.00 58 Tile Grout 5 Kg/bag 1 Bag 175.00 175.00 Total 90,224.00 General Conditions 1. All Entries Must Be Legible; 2. Bidders Must Attach These Documents Together With Rfq: A. If Total Amount Of Abc Is Php50,000.00 And Above Bidders Must Submit Mayor's Permit, Certificate Of Philgeps Registration, And Omnibus Sworn Statement; B. If Total Amount Of Abc Is Below Php50,000.00 Bidders Must Submit Mayor's Permit And Certificate Of Philgeps Registration Only. C. If Total Amount Of Abc Is Above Php500,000.00 Bidders Must Submit Mayor's Permit, Certificate Of Philgeps Registration, Omnibus Sworn Statement, And Latest Tax Clearance Or Income Tax Return. 3. Place This Rfq In A Sealed Envelope And Type The Following Details On The Face Of The Envelope: " Deped Southern Leyte Rfq No. Pr No. Philgeps Reference No. (if Applicable)" 4. Delivery Period Must Be At Thirty (30) Calendar Days Upon Receipt Of The Purchase Order (indicate The Days Of Delivery In The Bidder’s Certificate Box) 5. Item/s Delivered Must Have Warranties For Unit Replacements, Parts, Labor Or Other Services; 6. Price Validity Shall Be For A Period Of Thirty (30) Calendar Days; 7. Quoted Prices Must Be Inclusive Of Taxes, And Other Charges Or Fees And Shall Not Exceed The Approved Budget For The Contract(abc); 8. Transaction With Deped Southern Leyte Shall Mean Compliance By The Winning Bidder With The Bid And Delivery Requirements Before The Issuance Of Check Payment 9. Failure To Comply With These Conditions Shall Mean Disqualification Of Your Bid Proposal

Details: Description Republic Of The Philippines Province Of Apayao Municipality Of Conner Local Government Unit Invitation To Bid For; Project Title: Construction Of One (1) Unit Warehouse In Conner, Apayao Location: Paddaoan, Conner, Apayao Project Id: 24mgu-infra-048 The Local Government Unit Of Conner, Apayao, Through The Da-rfo-car Intends To Apply The Sum Of Twenty-four Million Seven Hundred Fifty Thousand Pesos Only (24,750,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of One (1) Unit Warehouse In Conner, Apayao Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Local Government Unit Of Conner, Apayao Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 907 Calendar Days Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 2. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 3. Interested Bidders May Obtain Further Information From Local Government Unit Of Conner, Apayao And Inspect The Bidding Documents At The Address Given Below From Civil Registrar Office 4. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders At The Office Of The Municipal Civil Registrar On December 27, 2024. {insert If Necessary: And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of P 25,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 5. The Local Government Unit Of Conner, Apayao Will Hold A Pre-bid Conference On January 3, 2025 @ 10:00 Am At The Lgu-premises, Caglayan, Conner, Apayao Which Shall Be Open To Prospective Bidders. 6. Bids Must Be Duly Received By The Bac Secretariat In Person At The Office Of Civil Registrar Office On Or Before January 17, 2025 @ 9:00 Am (i) Manual Submission At The Office Address As Indicated Above. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 8. Bid Opening Shall Be On January 17, 2025 @ 9:30 Am At The Given Address Below Lgu-premises, Caglayan, Conner, Apayao. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The Local Government Unit Of Conner, Apayao Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. Scope Of Work Item No. Description Unit Quantity A.1.1(6) Provision Of Combined Field Office, Laboratory And Living Quarters Building For The Engineer (rental Basis) Month 30 A.1.2(2) Provision Of 4x4 Pick Up Type Service Vehicle For The Engineer On Bare Rental Basis Month 30 A.1.1(11) Provision Of Furniture/fixtures Equipment And Appliances For The Field Office For The Engineer Lumpsum 1.00 B.3 Permit And Clearances Lumpsum 1.00 B.5 Project Billboard/signboard Each 1.00 B.7(2) Occupational Safety And Health Lumpsum 1.00 B.9 Mobilization/demobilization Lumpsum 1.00 B.16 Recognition Plate/project Marker Each 1.00 102(2) Surplus Common Excavation Cu.m. 3,000.00 803(1)a Structural Excavation (common Soil) Cu.m. 1,077.68 804(1)b Embankment From Borrow Cu.m. 218.40 804(4) Gravel Fill Cu.m. 88.09 311(1)e1 Portland Cement Concrete Pavement (280mm Thk.) Cu.m. 398.11 900(1)c2 Structural Concrete (footing And Slab On Fill), Class A, 28 Days Cu.m. 252.88 900(1)c4 Structural Concrete (column), Class A, 28 Days Cu.m. 115.45 900(1)c6 Structural Concrete (beams/girders), Class A, 28 Days Cu.m. 72.60 902(1)a Reinforcing Steel (deformed), Grade 40 Kgs. 45,065.92 903(2) Formworks And Falseworks Sq.m. 1,102.50 1000(1) Soil Poisoning Ltr. 177.48 1046(2)a1 Chb Non-load Bearing (including Reinforcing Steel), 100mm Sq.m. 381.28 1046(2)a2 150mm Chb Non-load Bearing (including Reinforcing Steel) Sq.m. 410.26 1047(8) Structural Steel (roof Framing) Bdft. 1,245.83 1014(1)b2 Prepainted Metal Sheets (rib Type, Long Span, Above 0.50mm) M 1,245.83 1013(2)a2 Fabricated Metal Roofing Accessory (flashings, Gauge 26)) M 157.80 1013(2)b1 Fabricated Metal Roofing Accessory (gutters, Gauge 26) M 52.50 1010(2)a Door (flush) Sq.m. 61.68 1007(1)b Aluminum Framed Glass Door (swing) Sq.m. 21.29 1011(1)a Roll-up Door Lumpsum 1.00 1008(1)a Aluminum Glass Windows (sliding) Sq.m. 31.43 1008(1)c Aluminum Glass Windows (awning) Sq.m. 4.32 1008(1)d Aluminum Glass Windows (fix) Sq.m. 6.59 1027(1) Cement Plaster Finish Sq.m. 1,267.24 1018(5) Glazed Tiles Sq.m. 301.00 1018(2) Unglazed Tiles Sq.m. 48.00 1003(1)a1 Carpentry (4.5mm, Metal Frame, Fiber Cement Board) Sq.m. 484.07 1003(1)e2 Carpentry (metal Furring Frame, Pre-painted Metal Panel) Sq.m. 221.27 1032(1)a Painting Works Sq.m. 2,907.48 1051 (1) Railing Lumpsum 1.00 1001(8) Sewer Line Works Lumpsum 1.00 1001(9) Storm Drainage And Downspout Lumpsum 1.00 1002(6) Cold Waterline Works Lumpsum 1.00 1002(4) Plumbing Fixtures Lumpsum 1.00 1001(6) Catch Basin (concrete) Each 10.00 1001(11) Septic Vault Lumpsum 2.00 1100(10) Conduit, Boxes And Fittings (conduit Works/conduit Rough-in) Lumpsum 1.00 1101(33) Wires And Wiring Devices Lumpsum 1.00 1103(1) Lighting Fixtures And Lamps Lumpsum 1.00 1202(6)a1 Fire Extinguisher Lumpsum 7.00 1208(1) Fire Alarm System Lumpsum 1.00 13. For Further Information, Please Refer To: Edmundo B. Desiderio Jr, Ce. Bac Sec Head-infrastructure Office Of The Municipal Engineer Vivian B. Pacis Bac Chairman-infrastructure Office Of The Civil Registrar 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: [philgeps, Local Government Unit Of Conner, Apayao]

Details: Description Invitation To Bid For The Procurement Of Hauling Vehicle Delivery Truck (open Cargo) Under Rice Program Fy 2024- Pss 1. The Department Of Agriculture Regional Field Office Iva Through The Rice Program Intends To Apply The Sum Of Two Million One Hundred Thousand Pesos (ᵽ 2,100,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of Hauling Vehicle Delivery Truck (open Cargo) Under Rice Program Fy 2024 - Pss With Project Identification No.: Itb-2024-12-256. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture Regional Field Office Iva Now Invites Bids For The Above Procurement Project. Hauling Vehicle Delivery Truck (open Cargo) A. Prime Mover Type: Diesel Engine Engine Displacement: 1400 Cc, Minimum B. Performance Classification Aspiration Method: Turbocharged And Intercooled Steering System: Power-assisted Steering Transmission System: Constant Mesh-synchromesh (manual) No. Of Drive: Two Emission Rating: Euro Iv, Minimum C. Body No. Of Wheels: Up To Six (6) Wheels Payload: 900 Kg, Minimum Gross Vehicle Weight: 16880 Kg, Maximum Front Cabin : Double Rear Body Type: Open Cargo D. Other Requirements / Inclusion 1. Fuel Tank Capacity: 80 Liters, Minimum 2. Output Power: 190 Ps, Minimum 3. Engine Torque: 450 N-m, Minimum 4. With Fiber Glass Canopy 5. Container Dimension: 5 Ft, Minimum 6. Warranty: 3 Years Or 100,000 Km Whichever Comes First 7. Certification Of Free Labor On Maintenance Service From The First 1,500 Km To 10,000 Km With Consumables Included Within Periodic Maintenance Schedule (pms). 8. Complete Set Of Tools As Per Manufacturer's Specifications, Tint, Seat Cover, Matting (cab), Air-conditioning System, Lto Registration For The First 3-years, Tpl And Comprehensive Insurance, Freight And Da Logo And "for Official Use Only" 9. Radio And Speakers: Tuner Radio With Usb, 2 Speakers 10. With 1 Unit Brand New Spare Tire With Rim And Accessories 11. Provision Of Vehicle Brochure And List Of Service Center In The Bidding Documents 12. With Certificate Of Conformity (coc) Issued By Denr Pursuant To Section 22, Chapter Ii Of Ra 8749 (clean Air Act Of 1999) In Relation To Part Ix, Rule Xxxi Of Denr Administrative Order 2000-81 13. With Certification Of Very Satisfactory Performance Of The Supplier From At Least Three (3) Clients, With Full Address And Telephone Numbers, Within The Last Two (2) Years. 14. With 100% Available Stocks In The Warehouse Of The Bidder During Post-qualification Place Of Delivery: Lares Compound, Brgy. Marawoy, Lipa City, Batangas Delivery Of The Goods Is Required Within Fifteen (15) Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Department Of Agriculture Regional Field Office Iva, 8:00 Am To 3:00 Pm Mondays Thru Fridays Except On The Scheduled Time Of Pre-bid Conference And Inspect The Bidding Documents At The Address Given Below: Department Of Agriculture Regional Field Office Iv-a Bac Secretariat Office / Arturo R. Tanco Training Hall Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On The Address Given Above Mondays Thru Fridays 8:00 Am To 3:00 Pm Except On The Scheduled Time Of Pre-bid And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (ᵽ5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, Or Through Electronic Means. 6. The Department Of Agriculture Regional Field Office Iva Will Hold A Pre-bid Conference On December 26, 2024 01:00 Pm (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity. Furthermore, Bidders Are Required To Provide Their Company Id And Another Valid Id, And Authorization Letter From The Company They Represent.) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas On Or Before January 7, 2025 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 7, 2025 01:00 Pm (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agriculture Regional Field Office Iv-a Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation 11. The Department Of Agriculture Regional Field Office Iva Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Engr. Ernie N. Rabusa Chairperson, Bids And Awards Committee Secretariat Department Of Agriculture Regional Field Office Iv-a Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Contact No.: (02) 8273-24-74 (local 4487) Email Address: Bacsecretariat@calabarzon.da.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: [https://notices.philgeps.gov.ph; Https://calabarzon.da.gov.ph/invitation-to-bid-page/] Date Of Issue: December 17, 2024 ______________________________________ (sgd) Engr. Romelo F. Reyes Chairperson, Bids And Awards Committee

Details: Description Republic Of The Philippines Department Of Public Works And Highways Iloilo 4th District Engineering Office Bolong Este, Sta. Barbara, Iloilo, Region Vi Invitation To Bid For Contract Id No.: 25gi0060 Contract Name: Construction Of Multi-purpose Building, Barangay Laylayan, Alimodian, Iloilo 1. The Dpwh – Iloilo 4th District Engineering Office Through The Fy 2025 General Appropriations Act (gaa) – R.a. No. 12116 Intends To Apply The Sum Of Four Million Nine Hundred Fifty Thousand Pesos Only (php 4,950,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Multi-purpose Building, Barangay Laylayan, Alimodian, Iloilo / 25gi0060. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh – Iloilo 4th District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Multi-purpose Building, Barangay Laylayan, Alimodian, Iloilo Contract Id No. : 25gi0060 Locations : Alimodian, Iloilo Scope Of Works : Construction Of Multi-purpose Building (covered Gym) With A Dimension Of 14.00m X 24.00m Including Concrete Floor Topping, Painted Concrete Columns, Provision Of Ring Holder With Fiber Glass Board Including Accessories, Electrical Works, And Storm Drainage And Downspout As Per Plan And Specification. Approved Budget For The Contract : Php 4,950,000.00 Contract Duration : 129 C.d. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Small B Of License Category C&d For Gb-1 (building Or Industrial Plant). The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. Per Gppb Resolution No. 15-2021, Prospective Bidders Are Required To Upload And Maintain Current Of The Following Eligibility Documents In The Philgeps: A. Registration Certification (sec/dti Registration) B. Mayor’s/business Permit Or Its Equivalent Documents C. Tax Clearance D. Pcab License And Registration, And E. Audited Financial Statements Any Expired Document Among The Afore-cited Eligibility Documents Shall Render The Philgeps Platinum Registration Certificate As Automatically Suspended And Its Validity Shall Resume Only Once The Said Expired Document Is Already Updated With The Philgeps. For Recently Expired Mayor’s Permit, The Recently Expired Mayor’s Permit Together With The Official Receipt As Proof That The Prospective Bidder Has Applied For Renewal Within The Period Prescribed By The Lgu Shall Be Accepted By The Philgeps For The Purpose Of Updating The Philgeps Certificate Of Platinum Registration And Membership. Consequently, The Prospective Bidders Shall Maintain An Updated And Current Philgeps Platinum Registration And Membership In The Civil Works Application (cwa). Prospective Bidders With Expired Eligibility Documents And Have Not Yet Updated Their Record In The Cwa Are Advised To Attached Their Newly Updated Platinum Registration And Membership Certificate, In The Technical Bid Documents And Not The Updated Particular Eligibility “class A” Document, To Be Considered Eligible By The Bids And Awards Committee. Prior To The Sale Of Bidding Documents, Only The Following Documents Are Required From Prospective Bidders, To Wit: A. Company Id Or Any Government Issued Id B. Authorization Letter (if Not Authorized Liaison Officer In The Cwa, I.e. Special Power Of Attorney For Sole Proprietorship; Or Board / Partnership / Joint Venture Resolution With Secretary's Certificate For Corporation / Partnership / Joint Venture / Cooperative) (memo 097.7_030623_reiteration Of Department Policies Issuances On The Sale Of Bidding Documents And Enrollment In The Civil Works Application Prior Bidding) 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). 4. Interested Bidders May Obtain Further Information From The Dpwh – Iloilo 4th District Engineering Office And Inspect The Bidding Documents At Bac Office, Dpwh Iloilo 4th Deo, Brgy. Bolong Este, Sta. Barbara, Iloilo During Weekdays From 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 17, 2025 - February 5, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb In The Amount Of Five Thousand Pesos Only (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented In Person. 6. The Dpwh – Iloilo 4th District Engineering Office Will Hold A Pre-bid Conference On January 24, 2025 At 10:00 A.m. At Bac Office (procurement Unit), Dpwh – Iloilo 4th District Engineering Office, Sta. Barbara, Iloilo And Through Video Conferencing And Webcasting Via Https://www.youtube.com/@dpwh.iloilo4.deo. And Microsoft Teams, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_iloilo4@dpwh.gov.ph For Electronic Submission On Or Before February 5, 2025 At 9:00 A.m.. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On February 5, 2025, Immediately After The Deadline Of Submission And Receipt Of Bids At Bac Office (procurement Unit), Dpwh-iloilo 4th District Engineering Office, Sta. Barbara, Iloilo And Through Video Conferencing And Webcasting Via Https://www.youtube.com/@dpwh.iloilo4.deo. And Microsoft Teams. Bids Will Be Opened In The Presence Of The Bidder's Representative Who Choose To Attend At The Activity. 10. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 11. The Dpwh –iloilo 4th District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Elna P. Nepomuceno Head, Bac Secretariat Dpwh –iloilo 4th Deo Sta. Barbara, Iloilo Tel No. (033) 3329762 Dpwhsbiloilo@yahoo.com Eva S. Bedonia Bac Chairperson Dpwh –iloilo 4th Deo Sta. Barbara, Iloilo Tel No. (033) 3329762 Dpwhsbiloilo@yahoo.com 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.dpwh.gov.ph / Notices.philgeps.gov.ph Advertisement/publication: Philgeps/dpwh Website Date Of Issue: January 17, 2025 Eva S. Bedonia Bac Chairperson

Details: Description Republic Of The Philippines Department Of Public Works And Highways Iloilo 4th District Engineering Office Bolong Este, Sta. Barbara, Iloilo, Region Vi Invitation To Bid For Contract Id No.: 25gi0063 Contract Name: Construction Of Multi-purpose Building, Sitio Kananghan, Barangay Buga, Leon, Iloilo 1. The Dpwh – Iloilo 4th District Engineering Office Through The Fy 2025 General Appropriations Act (gaa) – R.a. No. 12116 Intends To Apply The Sum Of Four Million Nine Hundred Fifty Thousand Pesos Only (php 4,950,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Multi-purpose Building, Sitio Kananghan, Barangay Buga, Leon, Iloilo / 25gi0063. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh – Iloilo 4th District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Multi-purpose Building, Sitio Kananghan, Barangay Buga, Leon, Iloilo Contract Id No. : 25gi0063 Locations : Leon, Iloilo Scope Of Works : Construction Of Multi-purpose Building (14m X 25m Covered Gym) With 5-span Footing, Column, Tie Beams, Sof, Roof Framing, Roofing With Storm Drainage & Downspout, Catch Basin And Glass Fiber Ring With Ring Holder As Per Plan And Specification. Approved Budget For The Contract : Php 4,950,000.00 Contract Duration : 157 C.d. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Small B Of License Category C&d For Gb-1 (building Or Industrial Plant). The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. Per Gppb Resolution No. 15-2021, Prospective Bidders Are Required To Upload And Maintain Current Of The Following Eligibility Documents In The Philgeps: A. Registration Certification (sec/dti Registration) B. Mayor’s/business Permit Or Its Equivalent Documents C. Tax Clearance D. Pcab License And Registration, And E. Audited Financial Statements Any Expired Document Among The Afore-cited Eligibility Documents Shall Render The Philgeps Platinum Registration Certificate As Automatically Suspended And Its Validity Shall Resume Only Once The Said Expired Document Is Already Updated With The Philgeps. For Recently Expired Mayor’s Permit, The Recently Expired Mayor’s Permit Together With The Official Receipt As Proof That The Prospective Bidder Has Applied For Renewal Within The Period Prescribed By The Lgu Shall Be Accepted By The Philgeps For The Purpose Of Updating The Philgeps Certificate Of Platinum Registration And Membership. Consequently, The Prospective Bidders Shall Maintain An Updated And Current Philgeps Platinum Registration And Membership In The Civil Works Application (cwa). Prospective Bidders With Expired Eligibility Documents And Have Not Yet Updated Their Record In The Cwa Are Advised To Attached Their Newly Updated Platinum Registration And Membership Certificate, In The Technical Bid Documents And Not The Updated Particular Eligibility “class A” Document, To Be Considered Eligible By The Bids And Awards Committee. Prior To The Sale Of Bidding Documents, Only The Following Documents Are Required From Prospective Bidders, To Wit: A. Company Id Or Any Government Issued Id B. Authorization Letter (if Not Authorized Liaison Officer In The Cwa, I.e. Special Power Of Attorney For Sole Proprietorship; Or Board / Partnership / Joint Venture Resolution With Secretary's Certificate For Corporation / Partnership / Joint Venture / Cooperative) (memo 097.7_030623_reiteration Of Department Policies Issuances On The Sale Of Bidding Documents And Enrollment In The Civil Works Application Prior Bidding) 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). 4. Interested Bidders May Obtain Further Information From The Dpwh – Iloilo 4th District Engineering Office And Inspect The Bidding Documents At Bac Office, Dpwh Iloilo 4th Deo, Brgy. Bolong Este, Sta. Barbara, Iloilo During Weekdays From 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 29, 2025 - February 17, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb In The Amount Of Five Thousand Pesos Only (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented In Person. 6. The Dpwh – Iloilo 4th District Engineering Office Will Hold A Pre-bid Conference On February 05, 2025 At 10:00 A.m. At Bac Office (procurement Unit), Dpwh – Iloilo 4th District Engineering Office, Sta. Barbara, Iloilo And Through Video Conferencing And Webcasting Via Https://www.youtube.com/@dpwh.iloilo4.deo. And Microsoft Teams, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_iloilo4@dpwh.gov.ph For Electronic Submission On Or Before February 17, 2025 At 9:00 A.m.. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On February 17, 2025, Immediately After The Deadline Of Submission And Receipt Of Bids At Bac Office (procurement Unit), Dpwh-iloilo 4th District Engineering Office, Sta. Barbara, Iloilo And Through Video Conferencing And Webcasting Via Https://www.youtube.com/@dpwh.iloilo4.deo. And Microsoft Teams. Bids Will Be Opened In The Presence Of The Bidder's Representative Who Choose To Attend At The Activity. 10. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 11. The Dpwh –iloilo 4th District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Elna P. Nepomuceno Head, Bac Secretariat Dpwh –iloilo 4th Deo Sta. Barbara, Iloilo Tel No. (033) 3329762 Dpwhsbiloilo@yahoo.com Eva S. Bedonia Bac Chairperson Dpwh –iloilo 4th Deo Sta. Barbara, Iloilo Tel No. (033) 3329762 Dpwhsbiloilo@yahoo.com 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.dpwh.gov.ph / Notices.philgeps.gov.ph Advertisement/publication: Philgeps/dpwh Website Date Of Issue: January 29, 2025 Eva S. Bedonia Bac Chairperson

Details: Description Item No. Items / Description Qty Unit 1 Embankment Materials 96 Cu.m 2 Gravel Bedding (g-2) 5 Cu.m 3 350 Pcs-2"x2"x12' Coco Lumber 1400 Bd.ft 4 436 Pcs- 2"x3"x12' Coco Lumber 2616 Bd.ft 5 Assorted Cwn 81 Kgs 6 Rsb #16mmø (footing, Column) 53 Pcs 7 Rsb #10mmø (flooring, Temp Bars, Stirrup) 276 Pcs 8 Tie Wire #16 44 Kgs 9 C-purlins #2"x3"x1.2mm 24 Pcs 10 Sagrod Deform Bar 10mm 6 Pcs 11 Rectangular Tube #2x6x2.0mm 8 Pcs 12 Angle Bar #1"x1"x3mm 8 Pcs 13 Flat Bar #1"x3mm 8 Pcs 14 Cutting Disc #4"ø 9 Pcs 15 Grinding Disc #4"ø 10 Pcs 16 Welding Rod J38-12 10 Kgs 17 Steelmatting 1.2mx2.4m/2"x2"x8mm 19 Sheet 18 Square Tube 2x 2x 1.5 Mm 90 Length 19 Portland Cement 226 Bags 20 Washed Gravel 27 Cu.m 21 Washed Sand 17 Cu.m 22 4" Chb 1894 Pcs 23 6" Chb 441 Pcs 24 Portland Cement 223 Bags 25 Sand 19 Cu.m 26 (finishing) Screen Sand 198 Bags 27 Pre-painted Roofing Effective Cover Width=1.015mx 0.40mm Thk X 6.5m Length-13 Sheets 84.5 Ln.m 28 Metal Wall Cladding (4mm X 4' X8' Width 900mm 5 Pcs 29 End Cover Flushing #12" 25 Pcs 30 1/4" X 4' X 8' Cement Fiber Board (facia Board) 7 Pcs 31 Tex Screw # 2 1/2" 632 Pcs 32 Roof Sealant 2 Lt 33 Blind Rivets # 1/2"x 1/8"ø 3 Box 34 4"x4" Loose Pin Hinge 8 Sets 35 Door Knob 1 Sets 36 3" Sliding Latch 2 Sets 37 Assorted Cwn 4 Kgs 38 Finishing Nails 2 Kgs 39 W1, -0.70m X 1.20m X 3/16" Thk Double Sliding Glass Window 0.84 Sq.m 40 D-1, (0.9m X 2.10m) Solid Panel Door 1 Sets 41 Single Swing Metal Door 1 Sets 42 Double Swing Metal Door 1 Sets 43 38mm2 Thw Stranded Wire 100 Meters 44 8.0mm2 Thhn Stranded Wire 10 Meters 45 2.0mm2 Thhn Stranded Wire 1 Box 46 3.5mm2 Thhn Stranded Wire 30 Meters 47 Led Bulb 15 Watts 7 Pcs 48 Ceiling Receptacle 4" 7 Pcs 49 Flush Type Utility Box 4 Pcs 50 Flush Type 3 Gang Switch 1 Pcs 51 Flush Type 1 Gang Switch 2 Pcs 52 Flush Type 3 Gang Convenience Outlet 1 Pcs 53 Pvc Male Adaptor 3/4 (electrical) 1 Pcs 54 Entrance Cap 3/4 1 Pcs 55 Panel Board Case Plug In Type 4 Branch 1 Pcs 56 15a 2 Pole Plug In Type Circuit Breaker 1 Pcs 57 20a 2 Pole Plug In Type Circuit Breaker 1 Pcs 58 40a 2 Pole Plug In Type Circuit Breaker 1 Pcs 59 Electrical Pipe 3/4 2 Length 60 Electrical Pipe #2 1 Length 61 Entrance Cap #2 1 Pcs 62 Pvc Male Adaptor #2 (electrical) 1 Pcs 63 Manual Transfer Switch Case 2p 1 Pcs 64 100a 2 Pole Bolt On Type Circuit Breaker 2 Pcs 65 Electrical Pipe 3/4 1 Pcs 66 Woodscrew 3/4 30 Pcs 67 Toks 3/4 30 Pcs 68 Surface Type Pvc Junction Box W/ Cover 5 Pcs 69 Pvc Pull Box W/ Cover 4x4 3 Pcs 70 Electrical Flexible Hose 3/4 150 Meters 71 Pvc Electrical Pipe Coupling Conncetor 3/4 30 Pcs 72 Hubbel Burndy H-tap Connector Yhd-250 6 Pcs 73 Secondary Rack W/ Double Porcelain Spool 1 Pcs 74 Electrical Tape Big 15 Pcs 75 Amaron Battery 12v 60ah 1 Bd.ft 76 Oil Filter 1 Pcs 77 Delo Gold Diesel Oil 12 Liters 78 Diesel Fuel 20 Liters 79 Coolant 1 Box 80 Injection Calibration 1 Unit 81 Injector Calibration 4 Units 82 Masonry Putty 3 Gal 83 Flat Latex (white) 6 Gal 84 Gloss Latex (white) 6 Gal 85 Tinting Color (raw Sienna) 1/4 Lt 6 Gal 86 Body Filler 5 Gal 87 Flat Enamel (white) 7 Gal 88 Semi-gloss Enamel (white) 7 Gal 89 Tinting Color (lamb Black) 1/4 Lt 7 Can 90 Red Oxide 3 Gal 91 Paint Thinner 2 Gal 92 Paint Brush #4" 6 Pcs 93 Paint Brush #2" 6 Pcs 94 Sanding Paper (grit 100) 16 Sheet 95 Sanding Paper (grit 240) 16 Sheet 96 Paint Roller W/ Tray #6" 5 Pcs 97 Paint Roller W/ Tray #4" 5 Pcs 98 Putty Knife #4" 3 Pair 99 Proj. Billboard: Tarpaulin #2.44mm X 2.44mm 1 Sets 100 Ordinary Plywood 3/16" 2 Pcs 101 32 Pcs 2"x3"x8" Coco Lumber 128 Bd.ft 102 Assorted Cwn, Labor 2 Kgs 103 #26 Corrugated Gi Sheets 32 Sheet 104 Ordinary Plywood 3/16" Thck 10 Sheet 105 70 Coco Lumber #2"x3"x12' 420 Bd.ft 106 130 Coco Lumber #2"x2"x12' 520 Bd.ft 107 Cwn #4" 15 Kgs 108 Cwn #3" 6 Kgs 109 Cwn #2 1/2" 6 Kgs 110 Umbrella Nails #3" 4 Kgs 111 Shovel 6 Units 112 Trapal (blue Or Orange) 25 Meters 113 Barra De Cabra 1 Units 114 Digging Bar (tagad) 2 Unit 115 Wheel Barrow 1 Unit 116 Construction Pail Pvc 6 Pcs 117 Dust Mask 10 Pcs 118 Handgloves 10 Pcs 119 Hard Hat 10 Lot 120 Rubber Boots 10 Pcs

Details: Description Metal Signages 1. 11 Pcs Flat Bar (1/4 X 3/4) 2. 15 Pcs L Bar (1/4 X 1) 3. 20 Pcs G.i Pipe (s20) ½” 4. 5 Pcs Flat Sheet (#22) 4*8 5. 5 Box Blind Rivets 1/8 X ½ 6. 2 Box Welding Rod 7. 1 Box Cutting Disk Timbangan Ng Bayan (4 Sets) 8. 8 Pcs L Bar (1/4 X 1) 9. 12 Pcs L Bar (1/4 X 2) 10. 2 Pcs Flat Bar (1/4 X 2) 11. 4 Pcs Flat Sheet (#22) 4*8 12. 2 Pcs Steel Matting (#16) 4*8 13. 2 Box Welding Rod 14. 3 Box Blind Rivets 15. 1 Box Cutting Disk 16. 16 Pcs Knuckle Hinges Painting Works 17. 10 Gal Paint (enamel White) 18. 6 Gal Paint (elastomeric / Yellow) 19. 4 Gal Paint (epoxy Primer Gray) 20. 2 L Paint (enamel Black) 21. 2 L Paint (enamel Red) 22. 2 Gal Red Metal Oxide Primer 23. 6 L Paint Thinner 24. 2 Pcs Roller Brush (4") 25. 10 Pcs Roller Filler (4") 26. 5 Pcs Roller Brush (2") 27. 5 Rolls Nylon String 28. 5 Kgs Common Wire Nail 3" 29. 61 Bags Portland Cement 30. 4 M3 Washed Sand 31. 6 M3 Crushed Gravel 3/4" 32. 5 M3 Ordinary Gravel 33. 84 Pcs Dsb 10mm Diameter 34. 6.5 Kgs G.i. Tie Wire #16 35. 155 Pcs Chb 4" 36. 2 Pcs Angle Bar 1 1/2" X 1 1/2" X 90ᴼ 37. 2 Pcs Angle Bar 2" X 2" X 90ᴼ 38. 15 Pcs C - Purlins 2 " X 3 " 39. 6 Pcs C -channel 2" X 6 " 40. 19 Pcs Pre - Painted Corrugated Sheet 10' 41. 6 Pcs Pre - Painted Gutter 8' 42. 17 Pcs Pre - Painted Flashing 8' 43. 3 Pcs Pre - Painted Ridge Roll 8' 44. 18 Pcs Fiber Cement Board 1/2 X 10" X 8' 45. 5 Li Roof Sealant 46. 4 Pcs Teckscrew 47. 4 Pcs Paint Brush 4" 48. 20 L.m Flexible Pipe 25mm Diameter 49. 3 Sets Led Bulb 9 Watts 50. 3 Sets Receptacle 51. 1 Pc Two Pole Switch 52. 1 Box Thhn Stranded 3.50mm 53. 4 Pcs Electrical Tape 3/4" 54. 3 Gals Epoxy Primer (red) 55. 5 Pcs Paint Brush 2" 56. 1 Gal Paint Thinner 57. 3 Pcs G.i. Pipe 1" X 6.0mm 58. 2 Pcs G.i. Pipe 2" X 6.0mm 59. 4 Pcs G.i. Pipe 3" X 6.0mm 60. 2 Rolls Cyclone Wire 2" X 6' X 10m 61. 2 Kgs Welding Rod 60/13 X 1/8 62. 16 Pcs Round Bar 12mm Diameter 63. 2 Pcs Hd Steel Matting 4' X 8' 64. 33.33 Bd .ft. Matwood 10 Pcs 2" X 2" X 10' 65. 13.33 Bd .ft. Matwood 5 Pcs 2" X 2" X 8' 66. 20 Bd .ft. Matwood 10 Pcs 2" X 2" X 6' 67. 80 Bd .ft. Matwood 2" X 3" 68. 80 Bd .ft. Matwood 3" X 3" 69. 3 Kgs Cwn 2 1/2" Sizes 70. 1 Kg Original Water Base Wood Glue (stickwell) 71. 3 Pcs Ordinary Plywood 1/2" Thick 72. 6 Pcs Flex Board 1/4" Thick 73. 2 Pcs Ordinary Plywood 1/4" Thick 74. 2 Kgs Finishing Nail #1 75. 6 Pcs Ordinary Plywood ½ 76. 15 Pcs Ordinary Plywood ¼ 77. 5 Pcs Ordinary Plywood ¾ 78. 5 Pcs Angle Bar ¼ X 1 79. 10 Pcs Tubular 2 X 3 1.5 80. 5 Pcs Gi Pipe 3” #20 81. 10 Pcs Gi Pipe 1” #20 82. 10 Pcs Flat Bar ¼ X 1 83. 1 Roll Artificial Grass Matt (green) 84. 2 Gal Paint (choco Brown) 85. 2 Gal Paint (green) 86. 2 Gal Paint (white) 87. 2 Gal Paint (yellow) 88. 2 Gal Paint (red) 89. 2 Gal Paint (blue) 90. 10 Btls Spray Paint (gold) 91. 10 Btls Varnish (natural) 92. 10 Btls Varnish (maple) 93. 2 Gal Paint Thinner 94. 200 Pcs Matwood 2 X 2 X 10 95. 3 Kls Nail 1 ½ 96. 3 Kls Nail 2” 97. 6 Kls Nail 3” 98. 2 Kls Nail 4” 99. 10 Pcs Plain Bar 8mm 100. 3 Pcs Abaca Matt 101. 2 Pcs Roller Brush 3” 102. 4 Pcs Paint Brush 2” 103. 4 Pcs Paint Brush 4” 104. 4 Pcs Tacker Heavy Duty 105. 8 Box Tacker Wire 106. 5 Kls Flower Wire 107. 15 Kls Tie Wire 108. 2 Kls Concrete Nail 109. 20 Yard Blue Trapal 10ft 110. 2 Pcs Glue Gun (big) 111. 300 Pcs Glue Stick (big) 112. 7 Box Thumbtacks 113. 100 Pcs Abaca Twine (big) #24 114. 20 Pcs Abaca Twine (medium) #10 115. 10 Pcs Flap Disc 4” 100mm 116. 20 Pcs Transparent Tape 1 Inch 117. 4 Pcs Scissor 118. 2 Box Cutter Blade 119. 15 Pack Cable Tie 6” (100pcs/pack) 120. 6 Roll Nylon String (37m, 0.90mm, 50lbs) 121. 12 Pcs Gloves With Rubber Grip (paired) 122. 3 Box Welding Rod 123. 5 Box Cutting Disc Heavy Duty For Metal 4” 124. 2 Box Rivets 1/8 X ½ 125. 2 Box Rivets 3/16 X 1 126. 5 Pcs Seedling Tray 105 Holes 127. 3 Pcs Hand Shovel (small) 128. 1 Roll Pe Pipe Pump Hose (no. 1) 1 X 60mm 129. 1 Roll Pe Pipe Pump Hose (no. 0.5) 1 X 60mm ½ X 90m 130. 1 Pc Plywood ¾” 131. 1 Kl Finishing Nails 2” 132. 1 Pc Reducer 1 X 0.5 Dia.

Details: Description Supply & Delivery Of March 2, 2025 Exam Supplies Not Available At Ps Store (1 Lot) Item No.*****description*****total Quantity 1. Alcohol, Ethyl, 40ml - 50 Bottle 2. Alcohol, 70% (±2) Ethyl, 1 Gallon Or At Least 3.785 Liters (3,785 Ml) - 6 Gallon 3. Ballpen, 0.5mm, Black - 630 Piece 4. Battery, Dry Cell, Size Aa; 1.5 Volts; Alkaline; Two (2) Pcs Per Blister Pack - 6 Pack 5. Battery, Dry Cell, Size Aaa; 1.5 Volts; Alkaline; Two (2) Pcs Per Blister Pack - 6 Pack 6. Cartolina (assorted Color: Yellow, Green And Orange) - 1 Piece 7. Chalk, White Enamel, 100 Pieces Per Box - 1 Box 8. Correction Tape; 8 Meters - 172 Piece 9. Cutter/utility Knife, For General Purpose; With Anti-slip Grip Plastic Molded Body; With Built-in Blade Snapper; With Steel Blade Track; With Safety Screw Locking Mechanism; Blade Measurements: L 100mm X W 16mm; Thickness: At Least 0.40mm - 36 Piece 10. Double Sided Tape, 1" - 19 Roll 11. Envelope, Mailing - 2 Box 12. Envelope, Plastic, With Handle, Legal, Blue - 10 Piece 13. Envelope, Plastic, With Handle, Legal, Clear - 30 Piece 14. Envelope, Plastic, With Handle, Legal, Colored - 100 Piece 15. Envelope, Plastic, With Handle, Legal, Red - 30 Piece 16. Folder, L-type, Legal - 1 Pack 17. Folder, Pressboard, Legal, 100pcs Per Box - 1 Box 18. Glue, All-purpose; Gross Weight (min.): 240 Grams; Plastic Squeeze Type Bottle With Twist-cap Dispenser - 2 Bottle 19. Glue, All-purpose, 40 Ml - 534 Bottle 20. Id Holder, With Lace, Horizontal - 350 Piece 21. Ink Cartridge, Epson C13t664100 (t6641), Black - 5 Cart 22. Ink, Epson, 003, Black - 3 Bottle 23. Ink, Epson, 003, Cyan - 2 Bottle 24. Ink, Epson, 003, Magenta - 2 Bottle 25. Ink, Epson, 003, Yellow - 2 Bottle 26. Ink, For Stamp Pad, 50ml; Violet; With Applicator - 45 Bottle 27. Insecticide; Aerosol; Kerosene Based; Quick Kill Contact And Residual Type; Multi-insect Killer; Net Content Per Can: 600ml (min) - 1 Can 28. Machine Oil, All-purpose Oil, 100cc - 10 Bottle 29. Marker, Fluorescent, 3 Colors Per Set, (yellow, Orange & Green) - 3 Set 30. Marker, Permanent, Felt, 1.5mm, Black - 104 Piece 31. Marker, Permanent, Felt, 1.5mm, Blue - 24 Piece 32. Marker, Permanent, Dual Tip, For Cd/dvd - 80 Piece 33. Marker, Permanent, Felt, 1.5mm, Red - 10 Piece 34. Marker, Whiteboard, Felt, 1.5mm, Black - 78 Piece 35. Money Envelope, Small, Brown, 6.5" X 3", 500pcs Per Box - 1 Piece 36. Notepad, Stick-on, 1.5" X 0.5" - 3 Piece 37. Notepad, Stick-on, 50mm X 76mm; 70gsm; 100 Sheets Per Pad - 2 Pad 38. Notepad, Stick-on, 76mm X 100mm; 70gsm; 100 Sheets Per Pad - 2 Pad 39. Notepad, Stick-on, 76mm X 76mm; 70gsm; 100 Sheets Per Pad - 2 Pad 40. Paper, Multicopy A4; 80gsm; 500pcs Per Ream - 3 Ream 41. Paper, Multicopy Legal; 80gsm; 500pcs Per Ream - 3 Ream 42. Paper, Multipurpose A4; 70gsm; 500pcs Per Ream - 12 Ream 43. Paper, Multipurpose Legal; 70gsm; 500pcs Per Ream - 12 Ream 44. Pencil, Lead/graphite, With Eraser; 12 Pcs Per Box; Hardness: Hb Or 2; Lead/graphite Diameter (min): 2mm - 28 Box 45. Photo Paper, A4, Matte - 20 Pack 46. Plastic Bag, Transparent, 40" X 60" - 10 Piece 47. Plastic Fastener - 1 Box 48. Push Pin - 1 Pack 49. Resealable Bag, #6,1/2, 6.5" X 9.75", 100pcs Per Pack - 3 Piece 50. Rubber Band No. 18 - 2 Box 51. Scissors, Symmetrical/asymmetrical, Straight Trimmers Intended For Cutting Papers, Plastic, And Rubber; Dimension: Cutting Blade: 87mm, Total Length: 178mm - 30 Pair 52. Sign Pen, Extra Fine Tip, 0.5mm, Needle Type, Black - 49 Piece 53. Sign Pen, Extra Fine Tip, 0.5mm, Needle Type, Blue - 48 Piece 54. Sign Pen, Extra Fine Tip, 0.5mm, Needle Type, Red - 20 Piece 55. Sign Pen, Extra Fine Tip, 0.7mm, Needle Type, Black - 5 Piece 56. Sign Pen, Extra Fine Tip, 0.7mm, Needle Type, Red - 5 Piece 57. Sign Pen, Medium Tip, 1.0mm, Needle Type, Black - 36 Piece 58. Special Paper, White, A4, 170 Gsm, 10/pack - 10 Pack 59. Spray Bottle, 100ml Capacity - 25 Bottle 60. Stamp Pad, Felt; Stamp Pad Bed: Thickness (min.): 5mm X Width (min): 61mm X Length (min): 102mm - 70 Piece 61. Staple Wire, Standard; 26/6 - 7 Box 62. Stapler, Standard Type, #35 - 3 Piece 63. Sticker Paper, A4, Matte - 76 Pack 64. Storage Box, Plastic, 155l - 5 Piece 65. Tape, Masking, 24mm; At Least 20meters - 217 Roll 66. Tape, Masking, 48 Mm; At Least 20meters - 130 Roll 67. Tape, Packaging, 48 Mm; At Least 20meters - 69 Roll 68. Tape, Transparent, 24mm; At Least 20meters - 85 Roll 69. Tape, Transparent, 48 Mm; At Least 20meters - 60 Roll 70. Tissue, Facial, Pocket Size, 6s/pack - 248 Pack 71. Tissue, Interfolded Paper Towel; 150 Pulls; One (1) Ply; Raw Materials From 100% Recycled Fiber - 126 Pack 72. Trashbag, Large Size, 10pcs Per Roll/pack; Made From Polyethylene (pe) Plastic; Pe Shall Contain A Minimum Of 30% Post-consumer Material; Tubular Type, With Tie; Color: Black, White Or Green; Tear Resistant - 2 Roll/pack 73. Trashbag, Xl Size, 10pcs Per Roll/pack; Made From Polyethylene (pe) Plastic; Pe Shall Contain A Minimum Of 30% Post-consumer Material; Tubular Type, With Tie; Color: Black, White Or Green; Tear Resistant - 3 Roll/pack 74. Twine, Plastic; Weight Per Roll (min): 1,000g - 6 Roll 75. Vellum Board, White, A4, 180 Gsm, 10pcs Per Pack - 50 Pack 76. White Baronial Envelope, #6-3/4 X 3-5/8", 60gsm, 100pcs Per Pack - 1 Pack Schedule Of Requirements: Delivery Of Items Within 10 Calendar Days Upon Receipt Of Notice To Proceed. Area Of Delivery: Civil Service Commission Regional Office Vi No. 7 Oñate St., Mandurriao, Iloilo City