Fiber Tenders

Details: Description I. Project Billboard Pc 1.00 Ii. Temporary Facility Lot 1.00 Iii. Occupational Safety And Health Program Lot 1.00 Iv. Dismantling And Disposal Lot 1.00 V. Layout/staking And Temporary Closure Lot 1.00 Vi. Soil Treatment Works Lot 1.00 Vii. Earthworks A. Excavation Works (manual) Cu.m. 135.36 B. Backfilling Works Cu.m. 95.17 C. Earthfill Cu.m. 94.73 D. Gravel Bedding Cu.m. 15.65 Viii. Concrete Works A. 3000 Psi Concrete (ready Mix) Cu.m. 52.21 B. 3500 Psi Concrete (ready Mix) Cu.m. 73.06 C. Reinforcing Bars Kgs. 16,949.33 D. Formworks Sq.m. 257.50 E. Metal Deck Sq.m. 193.98 F. Shoring Jack Rental Lot 1.00 G. Pumpcrete Rental Lot 1.00 Ix. Masonry Works A. 5" Chb Laying Sq.m. 510.37 B. Plastering Works (rough Finish) Sq.m. 963.76 X. Waterproofing Works Sq.m. 12.40 Xi. Structural Steel Works A. Main Truss & Pratt Truss Kgs. 2,489.76 B. Roof Steel C-purlins Kgs. 1,750.32 C. Roof Frame Accessories Lot 1.00 Xii. Roofing Works A. Tinsmithry Sq.m. 271.00 B. 24" Bended Accesspries (spanish) L.m. 107.42 C. Roof Accessories Lot 1.00 Xiii. Carpentry Works A. Ceiling Works Sq.m. 392.96 B. Airvents Lot 1.00 Xiv. Tile Works A. 30cm X 30cm Vitrified Ceramic Tiles Sq.m. 409.00 B. 40cm X 40cm Vitrified Ceramic Tiles Sq.m. 352.20 C. Stair Nosing Lot 1.00 Xv. Surface Preparation A. Masonry/concrete Surface A1. Interior Sq.m. 481.88 A2. Exterior Sq.m. 481.88 Xvi. Painting Works A. Masonry/concrete Surface Sq.m. 963.76 B. Fiber Cement Surface Sq.m. 392.96 C. Wood Surface Sq.m. 314.00 D. Steel Surface Sq.m. 385.05 E. Scaffolding Rental Lot 1.00 Xvii. Doors And Windows Lot 1.00 Xviii. Steel Works Stainless Steel Handrails And Railings Lot 1.00 Xix. Plumbing Works Lot 1.00 Xx. Sanitary Works Lot 1.00 Xxi. Fire Protection Works Lot 1.00 Xxii. Electrical Works Lot 1.00 Xxiii. Septic Vault A. Excavation Cu.m. 15.06 B. Backfilling Works Cu.m. 3.46 C. Sanitary And Piping Works Lot 1.00 D. Hdpe Polysept Septic Tank Lot 1.00 Xxiv. Cistern Tank Lot 1.00 Xxv. Pump House Lot 1.00 Xxiv. Catch Basins Lot 1.00

Details: Description I. Project Billboard Pc. 1.00 Ii. Temporary Facility Lot 1.00 Iii. Occupational Safety And Health Program Lot 1.00 Iv. Lay-out /staking And Temporary Enclosure Lot 1.00 V. Soil Treatment Works Lot 1.00 Vi. Earthworks A. Excavation Works (using Equipment) Cu.m. 929.16 B. Backfilling Works Cu.m. 287.92 C. Earthfill Cu.m. 700.66 D. Gravel Bedding Cu.m. 31.31 Vii. Concrete Works A. 3000 Psi Concrete Works Cu.m. 179.96 B. 3000 Psi Concrete Works Cu.m. 153.42 C. Reinforcing Bars Kgs. 46,366.18 D. Formworks (use Twice) Sq.m. 1462.94 E. Metal Deck Sq.m. 387.96 F. Shoring Jack Rental Lot 1.00 Viii. Masonry Works A. 5" Chb Laying Sq.m. 1,020.74 B. Plastering Works (rough Finish) Sq.m. 1,927.52 Ix. Waterproofing Works Sq.m. 24.80 X. Structural Steel Works A. Main Truss & Pratt Truss Kgs. 4,753.18 B. Roof Steel C-purlins Kgs. 3,341.52 C. Roof Frame Accessories Lot 1.00 Xi. Roofing Works A. Tinsmithry Sq.m. 542.00 B. 24" Bended Accessories (spanish) L.m. 317.78 C. Roof Accessories Lot 1.00 Xii. Carpentry Works A. Ceiling Works- Metal Furring Sq.m. 785.92 B. Airvents Lot 1.00 Xiii. Tile Works A. 30cm.x30cm. Vitrified Ceramic Tiles Sq.m. 818.00 B. 40cm X 40cm Virtified Ceramic Tiles Sq.m. 704.40 C. Stair Nosing Lot 1.00 Xiv. Painting Works A. Masonry/concrete Surface A.1. Surface Preparation- Interior Sq.m. 1,927.52 A.2. Surface Preparation- Exterior Sq.m. 1,927.52 A.3. Base Coat And Top Coat Sq.m. 1,927.52 B. Fiber Cement Surface Sq.m. 785.92 C. Wood Surface Sq.m. 628.00 D. Steel Surface Sq.m. 770.10 E. Scaffolding Rental Lot 1.00 Xv. Doors And Windows Lot 1.00 Xvi. Steel Works Lot 1.00 Xvii. Plumbing Works Lot 1.00 Xviii. Sanitary Works Lot 1.00 Xix. Fire Protection Works Lot 1.00 Xx. Electrical Works Lot 1.00 Xxi. Septic Vault A. Excavation Works (masnual) Cu.m. 30.12 B. Concrete 300 Psi Cu.m. 1.88 C. Reinforcement Kg. 46.62 D. Hdpe Polysept Septic Tank Lot 1.00 E. Backfilling Works Cu.m. 12.22 F. Sanitary And Piping Works Lot 1.00 Xxii. Cistern Tank Lot 1.00 Xxiii. Catch Basins Lot 1.00 Xxiv. Manual Hauling At Materials/ Disposal Lot 1.00

Details: Description I. Project Billboard Pc 1.00 Ii. Temporary Facility Lot 1.00 Iii. Occupational Safety And Health Program Lot 1.00 Iv. Layout/staking And Temporary Enclosure Lot 1.00 V. Demolition Works Cu.m. 92.25 Vi. Clearing And Disposal Lot 1.00 Vii. Soil Treatment Works Lot 1.00 Viii. Earthworks A. Excavation Works (manual) Cu.m. 135.36 B. Backfiling Works Cu.m. 89.47 C. Earthfill Cu.m. 88.02 D. Gravel Bedding Cu.m. 15.65 Ix. Concrete Works A. 3000 Psi Concrete Cu.m. 52.21 B. 3500 Psi Concrete Cu.m. 73.06 C. Reinforcing Bars Kgs 16,949.33 D. Formworks Sq.m. 515.67 E. Metal Deck Sq.m. 193.98 F. Shoring Jack Rental Lot 1.00 G. Pumpcrete Rental Lot 1.00 X. Masonry Works A. 5" Chb Laying Sq.m. 510.37 B. Plastering Works (rough Finish) Sq.m. 963.76 Xi. Waterproofing Works Sq.m. 12.40 Xii. Structural Steel Works A. Main Truss & Pratt Truss Kgs 2,489.76 B. Roof Steel C- Purlins Kgs 1,750.32 C. Roof Frame Accessories Lot 1.00 Xiii. Roofing Works A. Tinsmithry Sq.m. 271.00 B. 24" Bended Accessories (spanish) I.m. 107.42 C. Roof Accessories Lot 1.00 Xiv. Carpenry Works A. Celling Works (metal Furring) Sq.m. 392.96 B. Airvents Lot 1.00 Xv. Tile Works A. 30cm X 30cm Vitrified Ceramic Tiles Sq.m. 409.00 B. 40cm X 40cm Vitrified Ceramic Tiles Sq.m. 352.20 C. Stairnosing Lot 1.00 Xvi. Painting Works A. Masonry/concrete Surface A.1. Surface Preparation - Interior Sq.m. 481.88 A.2. Surface Preparation - Exterior Sq.m. 481.88 A.3. Base Coat And Top Coat Sq.m. 963.76 B. Fiber Cement Surface Sq.m. 392.96 C. Wood Surface Sq.m. 314.00 D Steel Surface Sq.m. 385.05 E. Scaffolding Rental Lot 1.00 Xvii. Doors And Windows Lot 1.00 Xviii. Steel Works Lot 1.00 Xix. Plumbing Works Lot 1.00 Xx. Sanitary Works Lot 1.00 Xxi. Fire Protection Works Lot 1.00 Xxii. Electrical Works Lot 1.00 Xxiii. Septic Vault A. Excavation Works (manual) Cu.m. 15.06 B. Concrete , 3000 Psi Cu.m. 0.94 C. Reinforcement Kg. 23.31 D. Hdpe Polysept Septic Tank Lot 1.00 E. Backfiling Works Cu.m. 6.08 F. Sanitary And Piping Works Lot 1.00 Xxiv. Cistern Tank Lot 1.00 Xxv. Pump House Lot 1.00 Xxvi. Catch Basins Lot 1.00

Details: Description Item No. Description Quantity Unit B.5 Project Billboard / Signboard 1.00 Each B.7(1) Occupational Safety And Health Program (signage And Barricades) 1.00 Lumpsum B.9 Mobilization/demobilization 1.00 Lumpsum 803 (1)a Structure Excavation 12.10 Cu.m 804 (1)a Embankment From Structure Excavation 9.08 Cu.m 804 (1)b Embankment (from Common Borrow By Equipment) 40.00 Cu.m 804 (4) Gravel Fill 1.40 Cu.m 900(1) Structural Concrete (class A, 28 Days) 19.00 Cu.m 902 (1)a Reinforcing Steel (deformed) Grade 40 2046.00 Kg 903(2) Formworks And Falseworks 48.10 Sq.m 1001(5)a Catch Basin 4.00 Each 1001 (8) Sewer Line - Pvc 1.00 Lumpsum 1001 (9) Storm Drainage And Downspout 1.00 Lumpsum 1002 (4) Plumbing Fixtures 1.00 Lumpsum 1002 (27) Plumbing Works 1.00 Lumpsum 1003 (1)a1 4.5mm Fiber Cement Board On Metal Frame Ceiling 102.00 Sq.m 1005 Residential Casement Steel Windows 12.96 Sq.m 1005(6) Steel Casement Window (comfort Room Window) 1.00 Lumpsum 1010 (2)b Doors - Wood Panel 4.20 Sq.m 1013 (2)a1 Fabricated Metal Roofing Accessory - Ridge Roll 9.90 Ln.m 1013 (2)a2 Fabricated Metal Roofing Accessory - End Flashing & Gutter 24.40 Ln.m 1014 (1)b1 Prepainted Metal Sheets, Corrugated Type 104.00 Sq.m 1018 (1) Glazed Tiles And Trims 20.00 Sq.m 1018 (2) Unglazed Tiles 70.00 Sq.m 1027(1) Cement Plaster Finish 192.84 Sq.m 1032 (1)a Painting Works - Masonry (3 Coatings) 192.84 Sq.m 1032 (1)b Painting Works - Wood (3 Coatings) 102.00 Sq.m 1032 (1)c Painting Works - Steel 98.00 Sq.m 1043(1) Pvc Doors And Frames 1.26 Sq.m 1046(2)a1 Chb Non Load Bearing (including Reinforcing Steel)-100mm 9.00 Sq.m 1046 (2)a2 Chb Non Load Bearing (including Reinforcing Steel)-125mm 78.90 Sq.m 1047 (2)b Structural Steel Roof Truss 2000.00 Kgs 1047 (2)c Structural Steel Purlins 1400.00 Kgs 1051 (5) Metal Railing - Handrailing 9.00 Ln.m 1100 (10) Conduits, Boxes And Fittings 1.00 Lumpsum 1101 (33) Wires And Wiring Devices 1.00 Lumpsum 1102 (1) Panelboard With Main & Branch Breakers 1.00 Lumpsum 1103 (1) Lighting Fixtures And Lamps 1.00 Lumpsum 1200 (2)c Oscillating - Ceiling Fan 4.00 Set Equipment Needed (minimum): Low Bed Truck 1 Unit Backhoe (0.80cu.m.) 1 Unit Dump Truck (10cu.m.) 1 Unit One Bagger Concrete Mixer 1 Unit Welding Machine 1 Unit Power Cutter 1 Unit Concrete Vibrator 1 Unit

Details: Nasa’s Technology Transfer Program Solicits Inquiries From Companies Interested In Obtaining License Rights To Commercialize, Manufacture And Market The Following Technology. License Rights May Be Issued On An Exclusive Or Nonexclusive Basis And May Include Specific Fields Of Use.nasa Provides No Funding In Conjunction With These Potential Licenses. the Technology: this Technology, Developed At Nasa's Langley Research Center In Collaboration With Scientists At Duke University, Is A Novel Three-dimensional Scaffold Structure That Utilizes Electroactive Fibers For Tissue And/or Stem Cell Engineering. This Invention Enables Electroactive Fibers To Be Assembled Into Three-dimensional Scaffolds To More Closely Mimic The Native Biological Environment By Providing Biochemical, Mechanical, And Electrical Cues. current Scaffold Designs And Materials Do Not Provide All Of The Appropriate Cues Necessary To Mimic In-vivo Conditions For Tissue Engineering And Stem Cell Engineering Applications. It Has Been Hypothesized That Many Biomaterials, Such As Bone, Muscle, Brain And Heart Tissue Exhibit Piezoelectric And Ferroelectric Properties. Typical Cell Seeding Environments Incorporate Biochemical Cues And More Recently Mechanical Stimuli, However, Electrical Cues Have Just Recently Been Incorporated In Standard In-vitro Examinations. In Order To Develop Their Potential Further, Novel Scaffolds Are Required To Provide Adequate Cues In The In-vitro Environment To Direct Stem Cells To Differentiate Down Controlled Pathways Or Develop Novel Tissue Constructs. This Invention Is For A Scaffold That Provides For Such Cues By Mimicking The Native Biological Environment, Including Biochemical, Topographical, Mechanical And Electrical Cues. to Express Interest In This Opportunity, Please Submit A License Application Through Nasa’s Automated Technology Licensing Application System (atlas) By Visitinghttps://technology.nasa.gov/patent/lar-tops-200 if You Have Any Questions, Please E-mail Nasa’s Technology Transfer Program Atagency-patent-licensing@mail.nasa.govwith The Title Of This Technology Transfer Opportunity As Listed In This Sam.gov Notice And Your Preferred Contact Information. For More Information About Licensing Other Nasa-developed Technologies, Please Visit The Nasa Technology Transfer Portal Athttps://technology.nasa.gov/ these Responses Are Provided To Members Of Nasa’s Technology Transfer Program For The Purpose Of Promoting Public Awareness Of Nasa-developed Technology Products, And Conducting Preliminary Market Research To Determine Public Interest In And Potential For Future Licensing Opportunities.no Follow-on Procurement Is Expected To Result From Responses To This Notice.

Details: Description Local Government Of Valencia Catarata Street, Poblacion, Valencia City, Bukidnon, Philippines Philippine Access (088) 828-5430 Contract Reference No. 48-2024 12/14/2024 Invitation To Bid For The Construction Of Canopy And Other Structures, City Health Office At Barangay Poblacion, Valencia City, Bukidnon 1. The City Government Of Valencia Through Its Annual Appropriations Intends To Apply The Sum Of Four Million Seven Hundred Seventy-three Thousand Two Hundred Four Pesos And 84/100 (php 4,773,204.84) Being The Approved Budget Of The Contract (abc) To Payments Under The Contract For The Construction Of Canopy And Other Structures, City Health Office At Barangay Poblacion, Valencia City, Bukidnon. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The City Government Of Valencia Now Invites Bids For The Construction Of Canopy And Other Structures, City Health Office At Barangay Poblacion, Valencia City, Bukidnon. Particulars Describes As Follows: Item No. Qty Unit Description Specifications Unit Cost Total Cost 1 1 Lot Construction Of Canopy And Other Structures, City Health Office Php4,773,204.84 ● Construction Of Walkway Canopy ● Renovation Of Porte Cochery Roof ● Construction Of Waiting Area With Drinking Fountain And Handwashing Area ● Fabrication And Installation Of Mrf ● Construction Of Perimeter Fence ● Removal And Replacement Of Tb Dots Polycarbonate Roof Sheets ● Removal And Replacement Of Concrete Pavement Leading To Tb Dots ● Construction Of Parking Area And Outdoor Kitchen Scope Of Works: A.) Application Of Permits And Clearances, B.) Fabrication And Installation Of Project Billboard And Signboard, C.) Occupational Safety And Health Program, D.) Project Mobilization And Demobilization, G.) Demolition Of Kitchen, Pavement To Tb Dots And Porte Cochery Roof; Structure Excavation For Concrete Structures Such As Footings And Wall Footingh.) Gravel Fill For Footings, Wall Footing And Floors, I.) Construction Of Reinforced Concrete Structures Such As Footing, Pedestals, Wall Footing, Lavatory, Canal And Floors, J.) Fabrication And Installation Of Formworks And Falseworks, K.) Embankment From Structure Excavation, L.) Fabrication And Installation Of Steel Structures Roof Framings Such As Rafter, Girt, Anchor Bolt, Baseplate, Fascia Frame, Purlins, M.) Installation Of Pre-painted Metal Sheets And Fabricated Metal Accessories Such As Flashings And Gutter, Polycarbonate Roof, Acp, Pvc Ceiling, O.) Installation Of Metal Frames And Fiber Board On Fascia Board (fiber Cement Board), P.) Painting Works On All Steel And Concrete Structures, Q.)installation Of Plumbing Fixtures, Gratings, Barb Wire, Plumbing Works (including Handwashing Sink And Drinking Fountain), Storm Drainage And Downspout, R.) Installation Of Electrical Works, S.) Purchase & Installation Of Industrial Fan, Complete As Per Approved Pow, Plans, And Specifications. Part I General Requirements B.3 (1) 1.00 L.s. Permits And Clearances B.5 (1) 1.00 Ea. Project Billboard / Signboard B.7 (1) 1.00 L.s. Occupational Safety And Health Program B.9 (1) 1.00 L.s. Mobilization / Demobilization Part Ii Civil, Mechanical, Electrical And Sanitary/plumbing Works See Attached Plan And Specifications Part A Earthwork 801 (1) 1.00 L.s. Removal Of Structures And Obstruction 803 (1) A 168.74 Cu.m. Structure Excavation (common Soil) 804 (1) A 53.44 Cu.m. Embankment From Structure Excavation(common Soil) 804 (7) 31.66 Cu.m. Gravel Fill Part B Plain And Reinforced Concrete Work 900 (1) C 49.17 Cu.m. Structural Concrete (3000psi, Class A, 28 Days) 902 (1) A1 3,212.35 Kg. Reinforcing Steel (deformed, Grade 40) 903 (2) 101.12 Sq.m. Formworks And Falseworks Part C Finishings And Other Civil Works C.2 Masonry Works 1046 (2) A1 209.24 Sq.m. Chb Non Load Bearing (including Reinforcing Steel, 100mm) C.3 Fabricated Materials 1007 (1) B 5.25 Sq.m. Aluminum Framed Glass Door (swing Type) 1008 (1) A 44.52 Sq.m. Aluminum Glass Windows (sliding Type) 1008 (1) C 10.40 Sq.m. Aluminum Glass Windows (awning Type) 1008 (1) D 5.19 Sq.m. Aluminum Glass Windows (fixed Type) C.4 Finishing Works 1003(1)a1 147.40 Sq.m. Ceiling (6mm Marine Plywood On Metal Frame) 1003(1)a2 17.98 Sq.m. Ceiling (pvc Panel Board On Metal Frame) 1003(2)1 1.00 L.s. Parapet Wall (aluminum Composite Panel On Aluminum Frame) 1003 (11) A1 39.90 M. Fascia Board (fiber Cement Board) 1018 (1) 172.91 Sq.m. Glazed Tiles And Trims 1027 (1) 316.44 Sq.m. Cement Plaster Finish C.5 Painting Works 1032 (1) A 525.04 Sq.m. Painting Works (masonry) 1032 (1) C 572.85 Sq.m. Painting Works (steel) C.6 Roof Framing And Roofing Works 1013 (2) A2 50.10 L.m. Fabricated Metal Roofing Accessory (gauge 26) - Flashings 1013 (2) B1 25.00 L.m. Fabricated Metal Roofing Accessory (gauge 24) - Gutters 1014 (1) B2 548.64 Sq.m. Prepainted Metal Sheets (rib Type, Long Span, Above 0.427 Mm) See Attached Plan And Specifications 1036(1) A 70.56 Sq.m. Polycarbonate (sheets) 1047 (1) 6,302.64 Kgs Structural Steel 1047 (2) B 2,348.63 Kg. Structural Steel (purlins) 1047 (3) C 28.00 Ea. Metal Structure Accessories (turnbuckle) - 12mm Ø 1047 (4) 157.35 Kg. Metal Structure Accessories (cross Bracing) 1047 (6) 356.77 Kg. Metal Structure Accessories (steel Plates) 1047 (7) A 96.36 Kg. Metal Structure Accessories (bolts) 1047 (7) B 16.19 Kg. Metal Structure Accessories (sagrods) - 10mmø 503(1) 17.00 Sets Metal Frames And Grating C.7 Plumbing Works 1001 (5) B 4.00 Ea. Catch Basin (chb) 1001 (8) 1.00 L.s. Sewer Line Works 1002 (4) 1.00 L.s. Plumbing Fixtures (including Drinking Fountain And Handwashing Area) 1002 (24) 1.00 L.s. Cold Water Lines Part D Electrical Works 1100 1.00 L.s Conduits, Boxes And Fittings (conduit Works/conduit Rough-in) 1200 (3) 1.00 L.s Stand Fan, Industrial Type 1101 (33) 1.00 L.s. Wires And Wiring Devices 1102 (1) 1.00 L.s. Panelboard With Main & Branch Breakers 1103 (1) 1.00 L.s. Lighting Fixture And Lamps Php4,773,204.84 Required Number Of Days For Completion Is 195 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project Within 10 Years From The Date Of Submission And Receipt Of The Bid Hereof. The Description Of An "eligible Bidder" Is Contained In The Bidding Documents, Particularly In Section Ii. Instructions To Bidders. 3. No Time Extension Shall Be Granted Unless On Fortuitous Event, Acts Of Nature Or Any Natural Calamities. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary "pass/fail" Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act". Bidding Is Restricted To Filipino Citizens, Sole Proprietorship, Partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 5. Interested Bidders May Obtain Further Information From Josafat L. Caipang, Head Of Lgu-valencia City Bac Secretariat And Inspect The Bidding Documents At Address Given Below From Mondays-fridays 8:00 Am To 5:00 Pm. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders On December 15, 2024 To Opening Date From The Address Below And Upon Payment Of Non-refundable Fee For The Bidding Documents In The Amount Five Thousand Pesos (php 5,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) Provided That The Bidders Shall Pay The Non-refundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Site Inspection Is Required From Every Interested Bidder And Site Inspection Certificate Shall Form Part Of The Bid Documents. No Site Inspection Certificate Shall Mean Automatic Disqualification. Site Inspection Schedule Is On December 20, 2024 At 10:00 O’clock In The Morning, Assembly Area At Bac Office. 6. The City Government Of Valencia Will Hold Its Pre-bid Conference On December 23, 2024 (1:30 Pm) At The Bac Office, City Hall Compound, City Of Valencia, Bukidnon Which Shall Be Open To All Interested Bidders. 7. Only Project Engineers, Materials Engineer And The Like Are Required To Attend The Pre-bid Conference. In The Absence Of The Same, The Representative Must Present To The Bac An Authorization Letter Signed By The Owner. 8. Interested Contractor Are Required To Include In Their Technical Bid Proposal The Duly Signed List Of Contractor's Equipment Units, Which Are Owned, Leased And/or Under Purchase Agreements, Supported By Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project. 9. Prospective Bidders Who Were Not Able To Purchase Bid Documents Prior To The Bid Opening Shall Not Be Opened And Will Be Disqualified. 10. Bids Must Be Delivered To The Address Below On Or Before (1:00 Pm) January 6, 2025. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms In The Amount Stated In Itb Clause 18. Bids Will Be Opened In The Presence Of The Bidders’ Representative Who Chooses To Attend At The Address Below. Bid Opening Shall Be On (1:30 Pm) January 6, 2025 At Bac Office, City Hall Compound, City Of Valencia, Bukidnon. Late Bids Shall Not Be Accepted. The Clock In The Bac Office Shall Serve As The Time Reference, And Shall Be The Basis For The Official Time Received Of The Bidding Documents Submitted In The Office. 11. The City Government Of Valencia Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of The Bid. 12. The Head Of The Procuring Entity (hope) Reserves The Right To Accept Or Reject Any Or All Bids To Annul The Bidding Process, At Any Time Prior To Contract Award Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. All Correspondence Shall Be Addressed To The Bac Secretariat, Attention: Mr. Abe P. Gillaco, Mpa, Bac Chairman. 14. For Further Information, Please Refer To: Lgu Valencia City-josafat L. Caipang Admin Office, 8709 Catarata St., Poblacion, Valencia City, Bukidnon Tel. No. (088) 828-5430 Abe P. Gillaco, Mpa Bac Chairman

Details: Nasa’s Technology Transfer Program Solicits Inquiries From Companies Interested In Obtaining License Rights To Commercialize, Manufacture And Market The Following Technology. License Rights May Be Issued On An Exclusive Or Nonexclusive Basis And May Include Specific Fields Of Use.nasa Provides No Funding In Conjunction With These Potential Licenses. the Technology: innovators At The Nasa Langley Research Center, In Collaboration With Analytical Mechanics Associates, Have Developed An Automated Ultrasonic Scanning System For In-situ Cure Monitoring And Defect Detection Of Composites In An Autoclave Or An Oven. This Non-destructive Evaluation System Is Based On An Ultrasonic Contact Scanner Enclosed In An Insulated Vessel Placed Inside Of The Autoclave. The System Actively Scans For Any Defects That May Form In Composites During The Cure Process And Tracks Movement Of Defects Originating During Layup Or Cure. Typically, Non-destructive Evaluation Of Composites, By Ultrasound Or Other Means, Is Conducted Either Before Or After The Cure Process, But Many Defects Vanish And Form During Cure. Nasa's In-situ Cure Monitoring System, By Contrast, Provides Real-time Monitoring Of Defect Formation And Movement During Cure. This Not Only Offers A Better Understanding Of Defect Sources And Sinks, But Also The Ability To More Accurately Validate Process Models For The Prediction Of Cure Process Defects. nasa's System For In-situ Defect (e.g., Porosity, Fiber Waviness) Detection In Composites During Cure Consists Of An Ultrasonic Portable Automated C-scan System With An Attached Ultrasonic Contact Probe. This Scanner Is Placed Inside Of An Insulated Vessel That Protects The Temperature-sensitive Components Of The Scanner. A Liquid Nitrogen Cooling Systems Keeps The Interior Of The Vessel Below 38°c. A Motorized X-y Raster Scanner Is Mounted Inside An Unsealed Cooling Container Made Of Porous Insulation Boards With A Cantilever Scanning Arm Protruding Out Of The Cooling Container Through A Slot. The Cooling Container That Houses The X-y Raster Scanner Is Periodically Cooled Using A Liquid Nitrogen (ln2) Delivery System. Flexible Bellows In The Slot Opening Of The Box Minimize Heat Transfer Between The Box And The External Autoclave Environment. The Box And Scanning Arm Are Located On A Precision Cast Tool Plate. A Thin Layer Of Ultrasonic Couplant Is Placed Between The Transducer And The Tool Plate. The Composite Parts Are Vacuum Bagged On The Other Side Of The Tool Plate And Inspected. The Scanning System Inside Of The Vessel Is Connected To The Controller Outside Of The Autoclave. The System Can Provide A-scan, B-scan, And C-scan Images Of The Composite Panel At Multiple Times During The Cure Process. The In-situ System Provides Higher Resolution Data To Find, Characterize, And Track Defects During Cure Better Than Other Cure Monitoring Techniques. In Addition, This System Also Shows The Through-thickness Location Of Any Composite Manufacturing Defects During Cure With Real-time Localization And Tracking. This Has Been Demonstrated For Both Intentionally Introduced Porosity (i.e., Trapped During Layup) As Well Processing Induced Porosity (e.g., Resulting From Uneven Pressure Distribution On A Part). The Technology Can Be Used As A Non-destructive Evaluation System When Making Composite Parts In In An Oven Or An Autoclave, Including Thermosets, Thermoplastics, Composite Laminates, High-temperature Resins, And Ceramics. to Express Interest In This Opportunity, Please Submit A License Application Through Nasa’s Automated Technology Licensing Application System (atlas) By Visitinghttps://technology.nasa.gov/patent/lar-tops-327 if You Have Any Questions, Please E-mail Nasa’s Technology Transfer Program Atagency-patent-licensing@mail.nasa.govwith The Title Of This Technology Transfer Opportunity As Listed In This Sam.gov Notice And Your Preferred Contact Information. For More Information About Licensing Other Nasa-developed Technologies, Please Visit The Nasa Technology Transfer Portal Athttps://technology.nasa.gov/ these Responses Are Provided To Members Of Nasa’s Technology Transfer Program For The Purpose Of Promoting Public Awareness Of Nasa-developed Technology Products, And Conducting Preliminary Market Research To Determine Public Interest In And Potential For Future Licensing Opportunities.no Follow-on Procurement Is Expected To Result From Responses To This Notice.

Details: Description 1 Unit Rescue Vehicle A. Engine: 4n16 2.4 Liter Direct Injection Diesel With Two-stage Turbo (euro 5) Maximum Outputs (ps/rpm): 204/3,500 Maximum Torque (nm/rpm):470/1,500-2,750 Engine Start/stop Button: Equipped Fuel Tank Capacity: 75 Ltrs B.dimension Overall Length (mm): 5,360 Overall Width (mm): 1,930 Overall Height (mm): 1,815 Wheelbase (mm): 3,130 Tread (front/rear) (mm): 1,570/1,565 Min. Ground Clearance (mm): 222 Bed Interior Length (mm): 1,555 Bed Interior Width (mm): 1,545 Bed Interior Height (mm): 525 Cargo Floor Height (mm): 820 Gross Vehicle Weight (kg): 3,020 Curb Weight (kg): 2,035 Seating Capacity :5 Person C. Transmission Transmission: 6-speed At 4wd System: Super Select 4wd-ii Rear Differential Lock: Equipped Drive Modes: 7 Drive Modes D.suspension/brakes/tires And Wheels Front Suspension: Independent-wishbone With Coil Springs Rear Suspension: Rigid With Leaf Springs Front Brakes: Ventilated Discs Rear: Leading And Trailing Drums Anti-lock Braking System (abs): Equipped With Electronic Brakeforce Distribution (ebd) Brake Assist: Equipped Tires: 265/60/r18 Wheels: 18x7.51 Black Alloy/ 18x 7.51 Silver Alloy E. Steering Power Steering: Electric Steering Wheel: Leather Wrapped Steering Wheel-mounted Audio Control: Equipped Cruise Control: Equipped Steering Column Adjustment: Tilt And Telescopic F. Exterior Headlights: Multi-projector Led Headlights With Auto-lightning Control Fog Lights: Front: Led : Rear: Equipped Daytime Running Lights: Led Bedliner: Equipped G. Interior Seats: Driver: 10-way Power Adjustable (slide,recline, Double-height, Lumbar) With Convenience Hook And Seatback Pocket Seats: Passenger: 4-way Manual Adjustable (slide, Recline) Seat Material: Orange Synthetic Leather With Black Suede Inserts Instrumental Cluster Display: 7"color Lcd Air Conditioning System: Dual Zone Automatic Air Conditioning Rear Circulation: Equipped H. Safety Airbags: Equipped Seat Belt Reminder: All Seats Camera: 360- Degree Camera Active Stability And Traction Control: Equipped Active Yaw Control: Equipped Hill Start Assist: Equipped Trailer Stability Assist: Equipped Hill Descent Control: Equipped Emergency Assist For Pedal Misapplication (eapm): Equipped: Equipped Blindspot Warning System (bsw) With Lane Change Assist (lca) : Equipped Forward Collision Mitigation System (fcm) With Pedestrian Detection: Equipped Rear Cross Traffic Alert ( Rcta): Equipped Lane Departure Warning (ldw): Equipped Auto High Beam: Equipped Iso- Fix And Tether Anchor: Equipped Parking Sensor: Front & Rear Lock/unlock System: Keyless Operation System (kos) I. Multi-media System Type: 9"touchscreen Display With Am/fm Radio, Bluetooth With Hands-free Technology, Usb Connectivity, Wireless Apple Carplay & Android Auto Usb Ports: Front: Equipped X2 (type-a & Type-c) Rear: Equipped X2 (type-a & Type-c) Speakers: 6 Speakers G. Ambulance Equipment Intall Basic Led Top Light With Siren & Pa System Tbd 4126 Red/blue Construct Medical Floor Mounted Cabinet (30" X 9" X 24") 2 Layers Install Collapsible Stretcher With Base Locks H. Consumables Medicine Cabinet First Aid Kit I. Others Install Fire Extinguisher Install Blinker Install Public Address System Lgu Livery (stickers/logo) Install Tow Rear Fiber Glass Canopy Trailer Tow Hitch Ball (2") Including Receiver

Description: Contract notice – general guidelines, standard rules Open procedure (construction work) Demolition of barracks buildings, Wiesbadener Strasse, 55252 Wiesbaden Lot 001 Demolition of buildings 32 + 36 Demolition of barracks buildings, Wiesbadener Strasse, 55252 Wiesbaden Main services of this tender: Demolition/dismantling of two multi-storey residential buildings as well as external walls and the existing surface paving in 55252 Wiesbaden. The total converted space to be demolished is approximately 26,700 m³. To be disposed of: Approx. 9,000 t concrete / masonry Approx. 30 t gypsum-based construction and demolition waste Approx. 20 t plastic Approx. 150 t iron and steel Approx. 30 t glass Approx. 25 t insulation containing HBCD Approx. 90 t wood Approx. 15 t mixed metals Approx. 160 t other construction and demolition waste Approx. 5 t electrical equipment Major pollutants: Approx. 190 t asbestos Approx. 70 t coal tar and tar-containing waste Approx. 150 t wood A IV Approx. 15 t artificial mineral fibers Approx. 5 t electrical components Approx. 0.1 t fluorescent tubes containing mercury Approx. 0.3 t capacitors Approx. 19 t waste containing PCBs / paints + plasters Approx. 10 t waste containing PCBs / old wood Approx. 60 t waste containing heavy metals

Details: Description Construction Of Multi-purpose Building (two Storey Commercial Building) Brgy. Poblacion, San Miguel, Zamboanga Del Sur Detailed Breakdown Of Component Cost For Each Item Item No. Description Qty. Unit Part I Facilities For The Engineer Total Of Part I As Submitted As Evaluated Part Ii Other General Requirements B.5 Project Billboard/ Sign Board As Submitted 3.00 Ea As Evaluated B.7(2) Occupational Safety And Health As Submitted 1.00 L.s. As Evaluated Total Of Part Ii As Submitted As Evaluated (project Id) (project Component Id - Description) Part Iii Civil, Mechanical, Electrical And Sanitary/plumbing Works Part A Earthworks 803(1)a Structure Excavation As Submitted 401.34 M3 As Evaluated 804(1)a Embankment From Structure Excavation As Submitted 124.56 M3 As Evaluated 804(4) Gravel Bedding As Submitted 58.20 M3 As Evaluated Part B Plain And Reinforced Concrete Works 900(1)c1 Structural Concrete (ready Mix, Class A, 28 Days) As Submitted 338.87 M3 As Evaluated 902(1)a1 Reinforcing Steel, Grade 40 As Submitted 45,370.42 Kg As Evaluated 903(2) Forms And Falseworks As Submitted 322.20 M2 As Evaluated Part C Finishing C.1 Termite Control Works 1000(1) Soil Poisoning As Submitted 3,026.67 L As Evaluated Sub - Total C.1 As Submitted As Evaluated C.2. Masonry Works 1046(2)a1 100 Mm Chb Non Load Bearing Wall (including Reinforcing Steel) As Submitted 563.06 M2 As Evaluated Sub - Total C.2 As Submitted As Evaluated C.3 Fabricated Materials 1010(2)b Wooden Panel Door As Submitted 16.70 Sq.m As Evaluated 1004(2)a Locksets As Submitted 9.00 Set As Evaluated 1004(2)g Hinges As Submitted 36.00 Pc As Evaluated 1007(1)b Aluminum Framed Glass Door (swing Type) As Submitted 17.60 M2 As Evaluated 1008(1)c Aluminum Glass Window (awning Type) As Submitted 2.52 M2 As Evaluated 1008(1)d Aluminum Glass Window (fixed Type) As Submitted 84.93 M2 As Evaluated Construction Of Multi-purpose Building (two Storey Commercial Building) Brgy. Poblacion, San Miguel, Zamboanga Del Sur Detailed Breakdown Of Component Cost For Each Item Item No. Description Qty. Unit C.4 Finishing Works 1027(1) Plain Cement Plaster Finish As Submitted 985.35 M2 As Evaluated 1003(1)a1 Fiber Cement Board Ceiling On Metal Frame As Submitted 377.27 M2 As Evaluated 1018(1) Glazed Tiles And Trims As Submitted 77.78 M2 As Evaluated 1018(2) Unglazed Tiles As Submitted 277.03 M2 As Evaluated Sub-total C.4 As Submitted As Evaluated C.5 Painting Works 1032(1)a Masonry/concrete Painting As Submitted 985.35 M2 As Evaluated 1032(1)b Wood Painting As Submitted 33.39 M2 As Evaluated Sub-total C.5 As Submitted As Evaluated Part D Plumbing/sanitary Works 1001(9) Storm Drainage And Downspout As Submitted 1.00 L.s. As Evaluated 1002(5) Sanitary/plumbing Fixtures As Submitted 1.00 L.s. As Evaluated 1001(6)b1 Catch Basin As Submitted 9.00 Units As Evaluated Spl-1 Septic Vault "type E" As Submitted 1.00 L.s. As Evaluated Total Of Part D As Submitted As Evaluated Part E 1100(19) Electrical Conduits, Boxes, And Fittings As Submitted 1.00 L.s. As Evaluated 1101(18) Wires And Wiring Devices As Submitted 1.00 L.s. As Evaluated 1102(21) Power Load Center, Switchgear, And Panel Boards As Submitted 1.00 L.s. As Evaluated 1003(1) Lighting Fixtures As Submitted 1.00 L.s. As Evaluated