Fencing Tenders

Details: Description Republic Of The Philippines Province Of Zamboanga Del Sur Municipality Of Dimataling Barangay Tinggabulong Bids And Award Committee Reference Number : Blgu-tingga-infra-2025-04 Project Title/p.r. # : Rehabilatation Of Barangay Health Station Approved Budget Of The Contract : 49,500.00 Site Location : Barangay Tinggabulong, Dimataling, Zamboanga Del Sur ***************************************************************************************** 1. The Blgu Of Barangay Tinggabulong, Zamboanga Del Sur, Has An Approved Budget From The Barangay Council Through 20% Of Blgu Fund 2024 In The Amount Forty-nine Thousand Five Hundred Pesos (php 49,500.00), Being The Approved Budget For The Contract (abc) For The Installation Of Barangay Fence Phase I. 2. The Blgu Of Barangay Tinggabulong, Zamboanga Del Sur Now Invites Bids For Rehabilatation Of Barangay Health Station Under (blgu-tingga-infra-2025-04). Construction/improvement Period Is Required 25 Days After The Acceptance Of The Notice To Proceed. Bidders Should Have Completed, Within Last One (1) Year From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The Irr Of Ra 9184. After Having Carefully Read And Accepted Your Request For Quotation And Its Terms And Conditions, I/we Submit Herein Price Quotation(s) For The Item(s) In This Rfq. The Quotations Shall Be Binding Upon Me/us For Thirty (30) Calendar Days Reckoned From Last Day Of Submission Indicated In This Rfq. The Corresponding Award Or Purchase Order Shall Be Accepted By Us At Any Time Before Expiration Of This Period. For More Information, Please See Mr. Ric L. Carvajal, Bac Chairman Total Bid Price : __________________ Other Requirements This Request For Quotation Is Subject For Terms And Condition Below: ****************************************************************************** Terms And Conditions A. Submission Of Requirements 1. Quotations And Other Requirements Stated Below Shall Be Submitted To The Bids And Awards Committee (bac) Blgu Tinggabulong, Dimataling, Zamboanga Del Sur, Philippines 7032. 2. Bidder Shall Submit Or Send The Following Requirements: A) Duly Signed Request For Quotation (rfq). Prices Shall Be Quoted In Philippine Peso. Statement Of Compliance Must Be Accomplished By The Bidder. B) Original Brochures Of The Items Offered Showing Its Performance Characteristics Or Certifications, If Applicable 3. For Submission With The Price Quotation(s) Or Upon Receipt Of Notification From The Procuring Entity: A) Dti Permit, B) Valid Mayor’s Permit/business Permit C) Tax Clearance Certificate, Or D) Philgeps Registration Certificate 4. Bidder’s Failure To Submit Such Document(s) Within The Prescribed Period From Receipt Of Notification Shall Be Ground For Disqualification. A Telephone Call Or Facsimile Transmission Shall Constitute An Official Notification. B. Evaluation Of Quotations Quotations Shall Be Compared And Evaluated On The Basis Of The Following Criteria: A) Completeness Of Submission B) Compliance With Technical Specifications C) Price D) Pass Purchaser’s Assessment Of The Technical, Legal, And Financial Capability And Experience Of The Bidders In The Same Or Similar Business. C. Award The Bidder Who Submitted The Lowest Calculated And Responsive Quotation Shall Be Awarded The Purchase Order After Evaluation By The Bac.

Details: Rlp Procurement Summary Gsa Public Buildings Service u.s. Government general Services Administration (gsa) Seeks To Lease The Following Space: state: Oklahoma city: Oklahoma City delineated Area: North: From Intersecting Points Hwy 74 And nw 150th St. In A North-easterly Direction To intersections E33rd St. And Hwy 35 east: From Intersecting Points E33 St. And hwy 35 In A Eastern Southerly Direction Along hwy 35 And Ne 23rd St. south: From Intersecting Points Hwy 35 And ne 23rd St. In A Western Direction To intersecting Points Nw 23 St. And Hwy 44. west: From Intersecting Points Nw 23rd St. and Hwy 44 In A Northerly Direction To Hwy 3 westerly Direction To Hwy 344 Northly direction To Hwy 74 Northerly Direction To intersecting Points Hwy 74 And Nw 150th St. minimum Sq. Ft. (aboa): 14,401 maximum Sq. Ft. (aboa): 14,401 space Type: Office, Warehouse, Lab, Wareyard parking Spaces (total): 34 parking Spaces (surface): 24 parking Spaces (structured): 10 parking Spaces (reserved): 0 full Term: 20 Years firm Term: 15 Years option Term: Not Required additional Requirements: -a Minimum Of 10 Total Covered Parking spaces For Govs To Be Located Within A secured-fenced Wareyard Area. -24 Hours/day, 7 Days A Week Access Needed. 10/2023 -14’ Minimum Warehouse Ceiling Clearance. -25 Foot Minimum Column Spacing. offered Space Must Meet Government Requirements For Fire Safety, Accessibility, seismic, And Sustainability Standards Per The Terms Of The Lease. A Fully Serviced lease Is Required. Offered Space Shall Not Be In The 1-percent-annual Chance floodplain (formerly Referred To As 100-year Floodplain). entities Are Advised To Familiarize Themselves With The Telecommunications prohibitions Outlined Under Section 889 Of The Fy19 National Defense authorization Act (ndaa), As Implemented By The Federal Acquisition regulation (far). ). For More Information, Visit: Https://acquisition.gov/far- case-2019-009/889_part_b. offers Due: 2/14/2025 occupancy (estimated): 6/1/2026 send Offers To: electronic Offer Submission: offers Must Be Submitted Electronically Through The Requirement Specific acquisition Platform (rsap), Located At Https://lop.gsa.gov/rsap/. interested Parties Must Go To The Rsap Website, Select The “registration” Link And follow The Instructions To Register. Instructional Guides And Video Tutorials Are offered On The Rsap Homepage And In The “help” Tab On The Rsap Website. solicitation Number: solicitation (rlp) Number 2ok0210 government Contact Information (not For Offer Submission) role Phone Email lease Contracting Officer 817-850-8449 Zachary.crawford@gsa.gov note: Entities Not Currently Registered In The System For Award Management (sam.gov) Are Advised To Start The Registration Process As Soon As Possible. an Offeror Checklist Has Been Included With The Rlp To Underscore The documents That May Be Required By This Rlp. Detailed Requirements Are contained In The Rlp. In The Event Of An Inconsistency Between This Checklist And the Rlp, The Rlp Is The Authoritative Source.

Details: Description The Local Government Unit Of Barangay City Heights, Through The Supplemental Budget No. 2 Of Cy 2024 Barangay Fund Intends To Apply The Sum Of Five Million Four Hundred Twenty Six Thousand Three Hundred Eighty Seven And .35/100 Pesos ( P 5,426,387.35 ) Being The Approved Budget For The Contract (abc) To Payment Under The Contract For Construction Of Perimeter Fence With Canopy (front Of Barangay) Amounting To Four Million Eight Hundred Twenty Three Thousand Nine And .79/100 Pesos (p 4,823,009.79 ) General Santos City. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Local Government Unit Of Barangay City Heights, General Santos City Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 121 Calendar Days Respectively. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 2. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 3. Interested Bidders May Obtain Further Information From Local Government Unit Of Barangay City Heights, General Santos City And Inspect The Bidding Documents At The Address Given Below From 8:00 Am To 5:00 Pm Except On Holidays. 4. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 13, 2025 From Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Amount Of Five Thousand Pesos (p5,000.00) The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees. 5. The Local Government Unit Of General Santos City Will Hold A Pre-bid Conference On February 19, 2025 At 1:00 P.m. At The Address Stated Below, Which Shall Be Opened To Prospective Bidders. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below Or Online/electronic Submission On Or Before March 4, 2025 At 12:00 Nn. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 8. Bid Opening Shall Be On March 4, 2025 At 1:00 P.m. At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. N/a. 10. The Local Government Unit Of Barangay City Heights Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Ma. Rosario R. Cascaro Bac Secretariat Bids And Awards Committee Sebastian St., Paradise Subd. General Santos City Cellphone No. 0951.736.0204 February 11, 2025

Details: 1x dismantling of monoblock heat pump for reuse - 50 m of underground heat pipe including excavation work - 50 m of underground electrical cable 400v including excavation work - 50 m of underground control cable including excavation work - 1x reinstallation of heat pump including foundation slabs and fencing - 35 m2 paving stones removed and re-laid - Decommissioning and re-commissioning of heat pump

Description: BOQ ITEMS: Earthwork in excavation in the following types of soil and rock up to and including 1.5 mtr. Lead including bailing or pumping out any water accumulating inside the excavated pit or trench shoring strutting adequate protection to be taken during excavation transporting the excavated soil for all lead stacking selectively including disposing off the rubbish rock fragments excess spoils etc. lead upto 100 Mtrs. in the area as directed by the Engineer all complete as per drawing specification and direction of the Engineer. , Earth work in back filling with available earth including watering and compaction at all elevations around foundations walls wells tunnels pitsculverts trenches road approaches and in plinth filling and area filling as per specifications and drawings and as directed by the Engineer with selected spoil within a lead of 100 mtr., Disposal carriage of rubbish waste rock earth etc.dumped stacked at site by mechanical means including loading unloading and dressing properly lead upto 5 Km. and up to any lift includind cost of all labours and equipments. , Surface dressing of the ground in all kinds of soil including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead up to 50 m and lift up to 1.5 m., Supply mix place in position compact cure cement concrete 1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size below foundations walls wells pits trenches etc. and in basin lining as per specifications drawings and directions of the Engineer and including cost of centring and shuttering but excluding cost of cement., Supply mix place in position compact and cure including testing of concrete specimens finishing surfaces as per specifications drawings and directions of the Engineer of the following grades of concrete with 20mm and down graded stone aggregate and coarse sand in super structure or any level excluding cost of centring and shuttering cement and reinforcement. M20 RCC PCC, Taking delivery from store or departmental yard bend bind and place the following types of reinforcement in all types of reinforced concrete work at all elevations including cleaning straightening cutting bending and binding with 18 SWG annealed wire or with welding such as tack lap butt etc with approved electrodes providing concrete cover blocks pin chairsnails supports of reinforcement etc. with all materials and labour complete as per drawings specifications and directions of Engineer excluding cost of reinforcement. , Install dismantle and remove the form work of approved quality including splay recess corners haunch etc. scaffolding necessary rendering of concrete surfaces after exposure including cost of all material and labours at all elevations. , Supply and laying in position brick work with designate 75 bricks in super structure etc in cement coarse sand mortar 1 isto 6 including mixing mortar laying bricks raking joints curing etc complete with all materials and labour as per drawings and specifications excluding cost of cement. , Providing and fixing 125 into 63 mm M. S. Hinges of approved quality and make., Providing and fixing ISI marked anodised aluminium tower bolt black finish Barrel type with necessary screws etc. complete 300 into 10 mm, Providing and fixing ISI marked anodised aluminium tower bolt black finish Barrel type with necessary screws etc. complete 150 into10 mm, Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete., Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with IS 3564 embossed on the body door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm with double speed adjustment with necessary accessories and screws etc. complete., Providing and fixing aluminium handles ISI marked anodised anodic coating not less than grade AC 10 as per IS 1868 transparent or dyed to required colour or shade with necessary screws etc. complete 125 mm., Providing and fixing aluminium sliding door bolts ISI marked anodised anodic coating not less than grade AC 10 as per IS 1868 transparent or dyed to required colour or shade with nuts and screws etc. complete 300x16 mm, Cement concrete flooring 1 cement 2 coarse sand 4 graded stone aggregate finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. Complete as per direction of EIC excluding cost of cement. 40 mm thick with 20 mm nominal size stone aggregate, Grading roof for water proofing treatment with Cement concrete 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size excluding cost of cement., 15mm thick minimum plastering with 1 cement 6 coarse sand to all faces of walls channels in roof and other structures at various elevations including mixing laying finishing curing and necessary scaffolding work complete as per drawings specifications with all materials and labours excluding cement Including Making grove if required. Work will be done upto 10 m height., Applying neat cement punning including cost of all materials labours etc. Complete as per direction of Engineer in charge excluding cost of cement, Supplying and applying two or more coats of white wash with lime to walls ceiling etc. At various elevations including preparation of surfaces cleaning etc.complete with all materials labour scaffolding work as per specifications ., Supplying and applying two or more coats of approved water proof cement paint over a coat of primer to exterior surfaces of concrete masonry plastered surfaces etc.at all elevations and including preparation of surface necessary scaffolding work etc.complete with all materials and labour Application of paint should be made as per manufacturer specifications to give an even shade. , Drain cleaning including disposal of rubbish up to 5 km all complete as per direction of EIC, Cleanning of chajja roof RWDC Floor corner drains etc., Painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even shade two or more coats on new or old work over a priming coat complete as per specification and direction of EIC. , Providing and fixing factory made ISI marked steel glazed doors windows and ventilator with beading and all members complete of standard rolled steel sections joints mitred and flash butt welded and sash bars tenoned and riveted including providing and fixing of hinges pivots including priming coat of approved steel primer but excluding the cost of other fittings complete all as per approved design sectional weight of only steel members shall be measured for payment., Taking delivery from store or departmental yard fabrication and erection of Structural steel work riveted bolted or welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete., Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete., Providing and fixing following G.I. pipes complete with G.I. fittings including trenching and refilling etc.15 mm dia nominal bore, Providing and fixing following G.I. pipes complete with G.I. fittings including trenching and refilling etc. 20 mm dia nominal bore, Providing and fixing following G.I. pipes complete with G.I. fittings including trenching and refilling etc.25 mm dia nominal bore, Providing and fixing following G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50 mm dia nominal bore, Providing and fixing following G.I. pipes complete with G.I. fittings including trenching and refilling etc. 100 mm dia nominal bore G.I.or CPVC.., Fixing of old G.I. pipes complete with G.I. fittings including trenching and refilling etc. 15 mm dia nominal bore, Fixing of old G.I. pipes complete with G.I. fittings including trenching and refilling etc.20 mm dia nominal bore, Fixing of old G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore, Providing and fixing C.P. brass bib cock or Pillar Cock of approved quality conforming to IS 8931. 15 mm nominal bore., Providing and fixing C.P. brass stop cock concealed of standard design and of approved make conforming to IS 8931. 15 mm nominal bore., Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of EIC, Demolishing R.C.C or PCC work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of EIC, Dismantling G.I. pipes external work including excavation and refilling trenches after taking out the pipes manually by mechanical means including stacking of pipes within 50 metres lead as per direction of EIC upto 150 mm dia, Providing and fixing or Renewing glass panes with putty and nails wherever necessary including racking out the old putty Float glass panes of thickness 5.5 mm, Renewing of old glass putty, Supplying laying in position stone masonary with Hard rock boulder with cement morter 1 cement 6coarse sand morter finishing the top with PCC reasonably smooth complete with curing and raking of joints including cost of all material equipments and labour excluding cost of cement. , Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete., Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade Old work one or more coats, Providing and fixing 35 mm thick factory made PVC door shutters with frame 65mm into 55mm with wall thickness 2 mm all complete as per manufacturers specification and direction of EIC. , Providing and fixing ISI marked flush door shutters conforming IS 2202 non decorative type core of block board construction with frame of 1st class hard wood and well matched comercial 3 plyveneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick including ISI marked stainless steel butt hinges with necessary screws., Providing and fixing precoated galvanised iron profile sheets 0.50 mm total coated thickness with zinc coating 120 grams per sqm as per IS 277 in 240 mpa steel grade 5 microns epoxy primer on both side of the sheet and polyester top coat 15 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by EIC. The sheet shall be fixed using self drilling self tapping screws with EPDM seal complete upto any pitch in horizontal vertical or curved surfaces including ridges barge board etc excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required. , Providing and fixing Following precoated galvanised steel sheet roofing accessories 0.50 mm total coated thickness Zinc coating 120 grams per sqm as per IS 277 in 240 mpa steel grade 5 microns epoxy primer on both side of the sheet and polyester top coat 15 microns using self drilling self tapping screws complete in Ridges plain 500 mm, Providing and fixing Following precoated galvanised steel sheet roofing accessories 0.50 mm total coated thickness Zinc coating 120 grams per sqm as per IS 277 in 240 mpa steel grade 5 microns epoxy primer on both side of the sheet and polyester top coat 15 microns using self drilling self tapping screws complete in Barge board up to 300mm, Providing and fixing Following precoated galvanised steel sheet roofing accessories 0.50 mm total coated thickness Zinc coating 120 grams per sqm as per IS 277 in 240 mpa steel grade 5 microns epoxy primer on both side of the sheet and polyester top coat 15 microns using self drilling self tapping screws complete in Gutter. 600 mm over all girth, Providing reinforced by organic fibres or inorganic synthetic fibres cement 6 mm thick corrugated sheets roofing up to any pitch and fixing with polymer coated J or L hooks bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete excluding the cost of purlins rafters and trusses including cutting sheets to size and shape wherever required. , Providing and fixing Following fibre cement high impact polypropylene reinforced roofing accessories in all colours with polymer coated J or L hooks bolts and nuts and or G.I. seam bolts and nuts G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete Close fitting adjustable ridges, Providing and fixing Following fibre cement high impact polypropylene reinforced roofing accessories in all colours with polymer coated J or L hooks bolts and nuts and or G.I. seam bolts and nuts G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete in Barge boards , Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing bolts nuts 8mm dia. G.I plain bitumen washers complete but excluding the cost of purlins rafters trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum ultra violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pocketsThe sheets shall be opaque or translucent clear or pigmented textured or smooth as specified. 2 mm thick corrugated, Repairing and maitenance of Rolling shutter in all respect including greasing repairing replacement of material to repairing of rolling shutter. Supply and fixing 27.5 cm long springs, Supply and fixing ball bearing, Supply and fixing precast slab M20 grade, Providing wood work in frames of false ceiling or floor partitions etc. sawn and fixed in position Sal wood and 15 mm thick light weight integral densified micro look edged with PVC top matt false floor tiles of size 595 into 595 mm including cost of all materials labours and as per direction of EIC. , Aluminum work for shutters of doors windows ventilators including providing and fixing hinges pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber neoprene gasket required Fittings shall be paid for separately Polyester powder coated aluminium minimum thickness of polyester powder coating 50 micron, Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device handle leverconforming to IS 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580 into 440 mm with integral type foot rests., Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 into 260 into 350 mm or 340 into 410 into 265 mm sizes respectively., Providing and fixing wash basin or Kitchen Sink with C.I. brackets 15 mm C.P. Brass pillar taps 32 mm C.P. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require White Vitreous China Wash basin size 630 into 450 mm with a single 15 mm C.P. brass pillar tap all complete as per direction of EIC., Providing and fixing white vitreous china water closet squatting pan Indian type Orissa pattern W.C. pan of size 580 into 440 mm, Supply and fixing PVC connecting pipe 15 mm N B, Supply and fixing PVC flexible waste pipe 32 or 40 mm N B, Supply and fixing float ball valve 20 mm N B, Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25 into 25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts bolts and washers as required complete as per the direction of EIC. , Dismantling steel work in built up sections in angles tees flats and channels including all gusset plates bolts nuts cutting rivets welding etc. including dismembering and stacking within 50 metres lead., Dismantling following roofing including ridges hips valleys and gutters etc.and stacking the material within 50 metres lead of G.S. Sheet, Dismantling following roofing including ridges hips valleys and gutters etc and stacking the material within 50 metres lead of Asbestos cement sheet

Details: 1. Advance Contract Award Notice (acan) An Acan Is A Public Notice Indicating To The Supplier Community That A Department Or Agency Intends To Award A Contract For Goods, Services Or Construction To A Pre-identified Supplier, Thereby Allowing Other Suppliers To Signal Their Interest In Bidding, By Submitting A Statement Of Capabilities. If No Supplier Submits A Statement Of Capabilities That Meets The Requirements Set Out In The Acan, On Or Before The Closing Date Stated In The Acan, The Contracting Officer May Then Proceed With The Award To The Pre-identified Supplier. 2. Background Information The Department Of National Defence (dnd) - Canadian Armed Forces (caf) Search And Rescue Technician (sar Tech) Occupation Requires Dive Operations Support For Caf-led Dive Training In Key West, Florida, Usa From 3 March To 18 April 2025, With An Option-year From March-april 2026, Specific Dates To Be Confirmed. 3. Definition Of Requirement Any Interested Supplier Must Demonstrate By Way Of A Statement Of Capabilities That It Is Capable Of Meeting The Following Mandatory Requirements: A. The Contractor Must Be In Possession Of A Certified Standby Diver, Or Dive Master, And Boat Operator; B. Services Provided To Be In Accordance With Caf Dive Safety Regulations For Search And Rescue Technicians Contained In Air Division Orders; C. Open Water Currency Diving Will Be Conducted In 1-week Serials Requiring The Use Of A Dive Charter Vessel With Captain (operator), And A Dive Master, For Up To 20 Divers, Daily Morning Or Afternoon Diving; D. In The Event Of A Maintenance Issue With The Dive Vessel That Cannot Continue With The Training, The Contractor Shall Provide A Backup Or Replacement Vessel To Continue With The Caf-led Training; E. The Contractor Must Provide An Air Sample (as) That Meets Canadian Cba Standards, Or As A Minimum Us Navy/navsea Cba Standards, One Week Prior To The Start Of Training; F. The Contractor Must Prove That Its Equipment Maintenance Program Is In Line With The Maintenance Standard Set Out By The Technical Authority (ta) (for Example: Yearly Visuals, 5 Yr Hydrostatic Inspections And Routine Compressor Maintenance); G. The Contractor Must Have Provided Services In The Industry For A Minimum Of 10 Years, Or Demonstrated A Minimum Of 10 Years Of Experience With Another Reputable Dive Charter In Key West; H. The Contractor Must Provide A Minimum Of Two Dive Sites Per Day Suitable For Diving Operations At Depths Of 25 To 100 Fsw, Preferably On Wrecks And Adhering To Number Of Dives Per Day While Following Approved Caf Dive Tables Provided; And I. The All-inclusive Services Must Include Daily Transport From The Dive Center Site To The Dive Site And Return, The Provision Of Fuel For The Vessel, Ability To Fill Caf-supplied Dive Tanks To 4,500 Psi And Daily Replenishment Of Dive Quality Air, Storage Of Caf Dive Gear (specifically Dive Tanks, Approximately 40) For The Period Of The Contract, Soft Pouch Compatible Dive Weights, All Safety Equipment Mandatory For Sea Going Vessels By Florida State Law (for Example Ship To Shore Marine Radio, Fire Extinguisher, Safety Dingy, Flares Etc..), And Enough Space For Up To 20 Divers With Individual Dive Equipment. 4. Indigenous Procurement A. The Procurement Is Not Set-aside Under The Procurement Strategy For Indigenous Business; And B. The Procurement Is Not Subject To One Or More Of Canada's Comprehensive Land Claims Agreements. 5. Justification For The Pre-identified Supplier The Proposed Supplier Is Believed To Be The Only Dive Operator Operating In Key West, Florida That Meets The Technical Compatibility Factors And Has The Technological Expertise Required To Complete The Mandatory Requirements Listed In Section 3 Above, Particularly The Filling Of Dnd Dive Tanks To A Pressure Of 4,500 Psi, A Military Training Requirement To Provide Extended Dive Training And Use Of The Dive Equipment To The Limits Of Its Capability. 6. Government Contracts Regulations Exception(s) The Following Exception To The Government Contracts Regulations Is Invoked For This Procurement Under Subsection 6 (d) - Only One Person Is Capable Of Performing The Work. 7. Period Of The Proposed Contract Or Delivery Date The Proposed Period Of The Contract Is From 1 March To 18 April 2025, And Will Consist Of The Provision Of Dive Charted Resources Over The Following Seven (7) Serials: Serial #1- Mar 3- Mar 7 2025, Serial #2- Mar 10-mar 14 2025, Serial #3 Mar 17-mar 21 2025, Serial #4 Mar 24-mar 28 2025, Serial #5 Mar 31-apr 4 2025, Serial #6 Apr 7-apr 11 2025, And Serial #7 Apr 14-apr 18, 2025. An Option Year For March-april 2026 Is Proposed As Well, Dates To Be Confirmed In 2026. 8. Cost Estimate Of The Proposed Contract The Estimated Value Of The Contract Is $68,985.00 (gst/hst Extra). 9. Name And Address Of The Pre-identified Supplier: Captain’s Corner 125 Ann Street Key West Florida, 33040 Usa 10. Suppliers' Right To Submit A Statement Of Capabilities Suppliers Who Consider Themselves Fully Qualified And Available To Provide The Goods, Services Or Construction Services Described In The Acan May Submit A Statement Of Capabilities In Writing To The Contact Person Identified In This Notice On Or Before The Closing Date Of This Notice. The Statement Of Capabilities Must Clearly Demonstrate How The Supplier Meets The Advertised Requirements. 11. Closing Date For A Submission Of A Statement Of Capabilities The Closing Date And Time For Accepting Statements Of Capabilities Is 2025-01-17. 12. Inquiries And Submission Of Statements Of Capabilities Inquiries And Statements Of Capabilities Are To Be Directed To: Mr. Adam Bidzinski Procurement Officer Department Of National Defence, 1 Canadian Air Division Telephone: 204-833-2500 Ex. 2053 E-mail: Adam.bidzinski@forces.gc.ca Delivery Date: Above-mentioned You Are Hereby Notified That The Government Intends To Negotiate With One Firm Only As Identified Above. Should You Have Any Questions Concerning This Requirement, Contact The Contracting Officer Identified Above. An Advance Contract Award Notice (acan) Allows Departments And Agencies To Post A Notice, For No Less Than Fifteen (15) Calendar Days, Indicating To The Supplier Community That It Intends To Award A Good, Service Or Construction Contract To A Pre-identified Contractor. If No Other Supplier Submits, On Or Before The Closing Date, A Statement Of Capabilities That Meets The Requirements Set Out In The Acan, The Contracting Authority May Then Proceed With The Award. However, Should A Statement Of Capabilities Be Found To Meet The Requirements Set Out In The Acan, Then The Contracting Authority Will Proceed To A Full Tendering Process. Suppliers Who Consider Themselves Fully Qualified And Available To Provide The Services/goods Described Herein, May Submit A Statement Of Capabilities In Writing To The Contact Person Identified In This Notice On Or Before The Closing Date Of This Notice. The Statement Of Capabilities Must Clearly Demonstrate How The Supplier Meets The Advertised Requirements. The Dnd File Number, The Contracting Officer's Name And The Closing Date Of The Acan Must Appear On The Outside Of The Envelope In Block Letters Or, In The Case Of A Facsimile Transmission, On The Covering Page. The Crown Retains The Right To Negotiate With Suppliers On Any Procurement. Documents May Be Submitted In Either Official Language Of Canada.

Description: Restricted tender with public participation competition Vob/a Bp-2025-0003-de Earthworks and shell construction work, B-002869 Ge 700 Bpol return process The building is a three-story office building (building 700) in the security area of Fraport A ... Morebp-2025-0003-de Earthworks and shell construction work, B-002869 Ge 700 Bpol return process The building is a three-story office building (building 700) in the security area of Fraport Ag, but not on the apron. The building is currently not in use and has been vacant for some time. Parts of the building have a basement, and parts are elevated above the outdoor facilities. Building services systems and expert inspections for the purposes of the maintenance and upkeep of the building are ongoing. As part of an extensive renovation of the interior and exterior areas and by adding additional uses/buildings, building 700 is to be rented to the Federal Police for the long term for repatriation processes and thus revitalized. The following measures are necessary as part of the earthworks: Demolition work is planned for the inner courtyard of the site. This includes, for example, the disposal of gravel and rubble, the terrace and the footbridge (approx. 300m²). All of the furnishings in the courtyard will also be dismantled and disposed of, ie fence, park bench, lamps, picnic table, trash can, table tennis table, etc. (approx. 25 pieces of furniture). In the outdoor facilities, a temporary construction road (825 m²) must be built to the construction site. In addition, approx. 400 m² of paving stones and 110 m of concrete blocks and angled retaining walls must be demolished. Underground pipes must be created, the total pipe length is ~360 m. For the trenches of the drainage channels / shaft structures, approx. 825 m³ of soil up to a maximum of 2.50 m must be loosened and stored to the side. In addition, trench shoring is required for 1275 m². As part of the shell construction work, two extensions are being built onto an H-shaped existing building. A detention area in reinforced concrete construction is being built between the two building blocks (width = 11.25m, length = 34m, height = 5m). The other extension is a steel-constructed suitcase storage facility (width = 9.3m, length = 22.05m, height = 5m) which is connected to the existing building via a new lock (width = 2.85m, length = 12.5m, height = approx. 3m). The detention area will be raised, i.e. the ceiling slab under the ground floor will be placed on strip foundations and will be approx. 70 cm above ground level. The luggage storage area will be provided with a trapezoidal sheet metal roof and the detention area with a reinforced concrete ceiling. Cells will be built inside the detention building. In addition, facade openings will be closed (approx. 200 m²) and core drillings (201) will be made. In addition, isolated concrete renovation work is planned on the external facades (1500 m²). The technical center will be extended on the existing roof (height: approx. 12 m). For this, new steel supports (5) will be installed and a new reinforced concrete beam (4 m³) will be made.

Details: This Consultation Concerns Site Security Works And Improving Summer Thermal Comfort At Mas/Fam Les Jardins De L'abbaye De Longeville-lès-saint-avold Located At 67b Rue Des Alliés - 57 740 Longeville-lès-saint-avold. This Contract Is Divided Into 4 Lots: - Lot 1: Vrd/Green Spaces, - Lot 2: Fencing/Gate, - Lot 3: Aluminum Joinery/Blind, - Lot 4: Air Conditioning.

Description: Contract notice - general guideline, standard regulation negotiated procedure with prior publication of a call for competition / negotiated procedure (services) Rv object planning The aim of this negotiated procedure is the award of object planning services for buildings and interiors in accordance with Sections 34 ff. Hoai 2021 for the execution of modernization and conversion measures for the office and laboratory rooms in the various departments of the Paul Ehrlich Institute (PEI) and the Federal Environment Agency (UBA). A small part of the measures will be limited to repair and maintenance measures. The planning services include processing phases 2 and 3, and 5 to 8. The services will be awarded in the form of a framework agreement for a term of at least one year with the option of annual extension to a total of four years, with a total of 12 measures expected. RV Object Planning The Paul Ehrlich Institute (PEI), with its current location in Langen, is an institution within the business area of the Federal Ministry of Health. It promotes the quality, effectiveness and safety of biomedical vaccines and medicines through research and testing._____ The institute consists of 9 buildings, most of which were planned between 1984 and 1987 and built from 1988 onwards. The buildings are connected to one another by corridors or covered walkways. House 1 is an administrative building with office use, houses 6 and 9 house central technical systems, workshops and offices, houses 2, 3, 4 and 5 mainly house offices and laboratories and houses 7 and 8 in particular laboratories and animal husbandry facilities. The buildings are constructed as solid structures with flat roofs, all walls are made of brickwork or concrete. Structurally, all buildings are built in a similar column grid. The individual rooms, hallway areas and central zones are arranged in this grid and extended to 3 m, 6 m, 9 m etc. depending on use. Houses 2 to 5 as well as 7 and 8 have a technical floor above each usable floor with escape balconies on the facade, and a technical floor with a room height of 2.30 m, which together form a fire protection unit. The so-called "ring canal", a canal structure in the basement that runs in a ring shape, also supplies the media to buildings 1 to 9 and connects them to one another._____ An access permit is required to enter the main building or the grounds. In addition, access to the laboratories with protection levels 1 to 3 requires instruction from the responsible staff. The entire company premises are fenced in and monitored._____ The expected measures mainly concern the conversion and modernization of laboratories in the Paul Ehrlich Institute. Existing laboratories and former offices must be converted into laboratory rooms and upgraded in accordance with new user requirements._____ The planning services may include processing Lph 2,3 and 5-8 as well as reviewing and checking the existing documents and creating existing plans._____ During implementation, coordinated consultation with the user and Lbih is essential, as the conversion must go hand in hand with the smooth operation of the building._____ A small part of the measures will be limited to repair and maintenance measures. These can be carried out both at the Paul Ehrlich Institute and at the Federal Environment Agency._____

Description: Contract notice – general guideline, standard regulation negotiated procedure with prior publication of a call for competition/negotiated procedure (services) RV electrical planning The aim of this negotiated procedure is the award of services for the specialist planning of technical equipment for plant groups 4 and 5 in accordance with Section 53 ff. Hoai 2021 for the execution of modernization and conversion measures for the laboratory rooms in the various departments of the Paul Ehrlich Institute (PEI) and the Federal Environment Agency (UBA). A small part of the measures will be limited to repair and maintenance measures. The planning services include processing phases 2 and 3 as well as phases 5, 6, 7 and 8. The services will be awarded in the form of a framework agreement for a term of at least one year with the option of an annual extension to a total of four years, with a total of 12 measures expected. RV Electrical Planning The Paul Ehrlich Institute (PEI), with its current location in Langen, is an institution within the business area of the Federal Ministry of Health. It promotes the quality, effectiveness and safety of biomedical vaccines and medicines through research and testing._____ The institute consists of 9 buildings, most of which were planned between 1984 and 1987 and built from 1988 onwards. The buildings are connected to one another by corridors or covered walkways. House 1 is an administrative building with office use, houses 6 and 9 house central technical systems, workshops and offices, houses 2, 3, 4 and 5 mainly house offices and laboratories and houses 7 and 8 in particular laboratories and animal husbandry facilities. The buildings are constructed as solid structures with flat roofs, all walls are made of brickwork or concrete. Structurally, all buildings are built in a similar column grid. The individual rooms, hallway areas and central zones are arranged in this grid and extended to 3 m, 6 m, 9 m etc. depending on use. Houses 2 to 5 as well as 7 and 8 have a technical floor above each usable floor with escape balconies on the facade, and a technical floor with a room height of 2.30 m, which together form a fire protection unit. The so-called "ring canal", a canal structure in the basement that runs in a ring shape, also supplies the media to buildings 1 to 9 and connects them to one another._____ An access permit is required to enter the main building or the grounds. In addition, access to the laboratories with protection levels 1 to 3 requires instruction from the responsible staff. The entire company premises are fenced in and monitored._____ The expected measures mainly concern the conversion and modernization of laboratories in the Paul Ehrlich Institute. Existing laboratories and former offices must be converted into laboratory rooms and upgraded in accordance with new user requirements._____ The planning services may include processing Lph 2,3 and 5-8 as well as reviewing and checking the existing documents and creating existing plans._____ During implementation, coordinated consultation with the user and Lbih is essential, as the conversion must go hand in hand with the smooth operation of the building._____ A small part of the measures will be limited to repair and maintenance measures. These can be carried out both at the Paul Ehrlich Institute and at the Federal Environment Agency._____