Tenders of Falco Sokol As

The subject of the performance of this order is the delivery of an autoclave, i.e. Fulfillment of the Expected Within the Planned Subsidy Project Named "new Robust Erp And Production Technology For Falco Sokol As". The technical parameters are as follows, with the fact that the client allows their modification while maintaining the principle that performance and range parameters are set as minimum and power, size and weight parameters as maximum, unless something else is stated for a specific parameter, with a tolerance so that the device It Could Be Installed In The Location For This Equipment. This Contract Includes Assembly, Commissioning at the Place Designated by the Client. The selected supplier is responsible for ensuring that the order will be delivered complete and will contain all parts necessary for trouble-free operation. Only Original (non-refurbished) Components Will Be Used For Production. The Technical Specification Establishes the Basis of Minimum Requirements for Function, Performance, Lifetime, Etc. If Zd or its Annexes contain specific trade names or brands, this is only a definition of the required standard, and the client also allows other technically and qualitatively comparable solutions. Required Working Dimensions of the Autoclave: Min 1400 X 6000 Mm, Minimum Capacity of 6 Baskets Simultaneously Required Dimensions and Number of Baskets, Chassis and Shelves: Basket Min Dimensions L: 950 Mm W: 920 Mm H: 920 Mm – Number: 16 Chassis: Min Dimensions D : 990 Mm W: 730 Mm Path Spacing: 600 Mm – Number: 16 Slot: Min Dimensions L: 885 Mm W: 915 Mm Thickness: 3 Mm – Number: 200 Specifications of the Sterilization Process: A) Steam Cycle With Forced Circulation Fan B) Shower Cycle With Steam Injection Heating In Autoclave C) Shower Cooling Through Tubular Heat Exchanger D) Compressed Air Overpressure Throughout Cycle (4 Bar) Required Accessories: A) Loading/Unloading Chain With Drive Attached From Rear To Autoclave With Flange B) Lab Sensor Kit F0 I. Special measuring technology, with which it is possible to monitor the temperature in the core of the product in real time. And the autoclave automatically calculates the effectiveness of the sterilization effect and calculates the F0 value itself. C) Management System That Meets the Requirements of the Industry 4.0 Subsidy Title. I. This Means That The Autoclave Will Be Ready To Receive Tpv Online From An In-House System Based On A Standardized Data Interface. Based on this, the autoclave automatically starts the sterilization process, after the end of the sterilization process it ends the program itself and transmits the information to the in-house system. The autoclave must be able to use its sensors to detect errors such as too high/low temperature, too high/low pressure, low water level and any other serious process errors. Based on the detection of these errors, the autoclave must be able to automatically adjust the length and parameters of the sterilization process or stop the process altogether. All these statuses are recorded and reports about them, together with other data, must be transferred to the internal company system. II. Plc Must Also Work As A Paperless Digital Recorder. All Process Data Will Be Recorded In Energy-Independent Memory In A Tamper-Resistant Format According To The Requirements Of Us Fda 21 Cfr 113.100 For Electronic Record Keeping. D) Software Kit I. A Software Package That Will Allow To Display, Print And Evaluate Individual Sterilization Cycles. At the same time, but also so that they are automatically downloaded directly to the selected folder on the remote FTP server.

"v 00535 - Replacing The Boiler At Falco Sokol A.s."

The subject of the performance of this order is the delivery of a separator, i.e. Fulfillment of the Expected Within the Planned Subsidy Project Named "new Robust Erp And Production Technology For Falco Sokol As". The technical parameters are as follows, with the fact that the client allows their modification while maintaining the principle that performance and range parameters are set as minimum and power, size and weight parameters as maximum, unless something else is stated for a specific parameter, with a tolerance so that the device It Could Be Installed In The Location For This Equipment. This Contract Includes Assembly, Commissioning at the Place Designated by the Client. The selected supplier is responsible for ensuring that the order will be delivered complete and will contain all parts necessary for trouble-free operation. Only Original (non-refurbished) Components Will Be Used For Production. The Technical Specification Establishes the Basis of Minimum Requirements for Function, Performance, Lifetime, Etc. If Zd or its Annexes contain specific trade names or brands, this is only a definition of the required standard, and the client also allows other technically and qualitatively comparable solutions. Technical Specification of the Separator/Cutter With Screening All-stainless Steel Machine Yes Hopper Content Min. 250 L Hopper Ready for Filling 200 Liters Carts from the Tipper Yes Deboning Whole Chickens and Ducks Yes Deboning Whole Pork Bones from Spine and Ribs Yes Deboning Pork Legs, Crossbones and Shoulders Yes Deboning Beef Bones Yes All Listed Raw Materials Must be Processed Through the Same Deboning Kit Yes Boning Using the Auger System and Radial Filter Yes Size of Holes in the Boning Filter Min. 5 Mm Mechanically Adjustable Boning Yield Yes Number of Boning Sets Min. 2 Machine Engine Power Min. 14 Kw Mixing And Breaking System In Hopper With Separate Drive And Forward And Reverse For Breaking Pork Bones Yes Main Moro Drive With Frequency Converter Yes Possibility Of Remote Machine Shutdown Via User Computer System Yes Machine Stop Reporting To User Computer System Yes Dismantling And Washing Cart For Safe Storage of Dismantled Parts Yes Equipment For Cleaning And Perfect Removal of the remains of meat and bones from the deboning filter Yes Button control without display Yes Width and length of the machine (a dimensioned drawing of the offered machine will be part of the offer) Max. 950 X 2700 Mm Folding Step With Position Sensor With Machine Shutdown Yes Control System That Meets The Requirements Of The Industry 4.0 Subsidy Title. The machine is equipped with safety features which, in the event of activation, immediately shut down the machine. It consists of a frame above the hopper, a folding step and a safety bar protecting the operator from the rotating parts of the separation head. When they are switched on, the machine subsequently transmits the information about stopping the operation to the in-house system. − Machine Is Able To Receive Tpv Online From In-house System. Based on this, the Operator Can Remotely Shutdown / Shutdown the Machine. The machine then transmits information back to the system about its status (on/off). It Can Also Communicate With An Associated Conveyor That Turns Itself On And Off According To Its Current Run. The order is not divided into parts. The contracting authority does not intend to discuss offers with the participants within the meaning of Art. 5.4 of the Rules.

"v 00830 – Delivery of Packaging Machine and Conveyor"

"v 00535 - Replacing The Boiler At Falco Sokol A.s. - New Announcement "