Fabrication Tenders

Details: Description Floating Tiller (mudboat Type - 3 Units @ 80,000.00 Floating Tiller (mudboat) Technical Specification 1. Prime Mover A. Rated Power: Minimum, 6.71 Kw, (9 Hp) B. Diesel Engine (air-cooled) C. Continuous Power: Minimum 80% Of Rated Power D. Specific Fuel Consumption At Continuous Power: Maximum 350 G/kwh 2. Peak Transmission Efficiency: Minimum, 80% 3. Forward Speed Range: 2.5 Kph To 4 Kph 4. Width Of Rotary Tilling Wheel: Minimum, 1.0m (rotary Tiller – 2”x1/4” Flat Bar) 5. Body: Gauge 14 Thickness 6. With Set Of Standard Tools And Accessories As Indicated In Paes (102:2000) Additional Tools: -vise Grip 10” -adjustable Wrench 12” 7. With Amtec Test Result, Preferably Coupled 8.must Conform To Paes: Paes 124:2000, Walking-type Agricultural Tractor- Specifications Part 3: Special Type (float-assist Tiller) Warranty: Minimum Of One (1) Year. Ø The Manufacturer / Distributor / Dealer Shall Issue A Warranty Certificate To The Buyer. Warranty Against Defective Materials And Workmanship Shall Be Provided For Parts And Services Except For Normal Wear And Tear Of Expendable Or Consumable Maintenance Parts Ø The Manufacturer / Distributor / Dealer Shall Be Capable Of: • Providing Services On Repairs After Warranty Period At Reasonable Cost; • Repair Of Defective Units And Provision Of Other After Sales Services Shall Be Undertaken Within 5 Working Days Upon The Receipt Of Complaints. Ø Supplier’s Fabricating Shop/service Centers Must Be Within The Province Of Zamboanga Del Sur. Ø To Be Delivered To Lower Usugan, Tambulig, Zds Ø Delivery Period: 45 Calendar Days From Issuance Of Purchase Order; Ø Payment: Payment Shall Be Made After The Payment: Payment Shall Be Made After The Manufacturers/ Distributors/ Dealers Completed The Delivery And Done Actual Demonstration Of The Unit. Ø The Unit Shall Be Labeled With A Reflectorized/ Laminated Dar Logo And The Words Dar-crfpsp In Long Bond Paper Size

Details: Description 1. 6 Units Battery Maintenance Free 12 Volts 3smf/n70 11 Plates 64ah 2. 9 Pieces Angle Bar ¼” X2”x20’ 3. 19 Pieces Gi Pipe 2”øx20’ Sch40 4. 19 Pieces Gi Pipe 1 ¼” Ø X 20’ Sch40 General Terms And Conditions 1. Fabricated Item Shall Be Delivered/installed To: Nmp Complex, Cabalawan, Tacloban City (fob Nmp-tacloban) 2. Delivery Period: Within 45 Calendar Days From Receipt/acknowledgement Of The Purchase Order (po). 3. Price Validity Shall Be For A Period Covered In The Purchase Order. 4. Price Quotation Should Be Made With Extra Care Taking Into Account The Specifications And Unit Of Quantity To Avoid Errors. Bidders Bind Themselves To All The Conditions Stipulated In This Quotation. 5. Price Quoted Shall Be Inclusive Of Taxes, Delivery Charges And Any Other Charges As May Be Prescribed By Law. 6. Cash On Delivery (cod) Is Not Acceptable. 7. Submission Of Multiple/alternative Bid Offers For One Item Shall Not Be Allowed. 8. The Bidder Must Specify The Brand Name Or Model Of Items With Check Marks. Failure To Indicate The Brand Name Or Model Signifies Non-compliance With The Terms And Conditions, Which Shall Be A Ground For Disqualification. 9. Withholding Taxes As Per Bir Rules And Regulations Will Be Deducted By Nmp From The Contract Price. 10. Payment Shall Be Done After Each/complete Service/delivery, Subject To The Usual Inspection And Acceptance Requirements, And Submission Of The Complete Documentary Requirements. 11. The Winning Bidder Must Provide At His Own Cost An Omnibus Sworn Statement Relative To The Herein Mentioned Transaction (for Abc’s P 50,000.00 And Above) 12. 1-year Warranty For Item 1 13. In Case The Service Is Deemed Below Satisfactory, The Contract Of Purchase Order May Be Terminated/severed (for Long Term/multiple Delivery). 14. The Supplier Gives Consent To The Nmp Bac-twg To Conduct Tie-breaking Through Draw Lots/toss Coin, In Case Of Tie Quotations. After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item At Prices Noted Above

Details: Description Item No. Unit Item Description 1 Lot "contract For The Supply Of Labor, Materials,tools And Equipments Necessary For The Construction Of Village Level Biocon Laboratory Scope Of Works: Other General Requirements B.5 Project Billboard B.7(2) Occupational Safety And Health Program B.9 Mobilization/ Demobilization Earthwork 803(1)a Structure Excavation 803(3) Foundation Fill Plain And Reinforced Concrete Work 900(1)c1 Structural Concrete 902(1)a1 Reinforcing Steel(deformed), Grade40 903(1) Formworks And Falseworks Finishing And Other Civil Works 1002 Plumbing Works 1003(4)cabinets 1003(14) Phenolic Board(flooring) 1006(6) Steel Doors And Frames 1007(1)a Aluminum Framed Glass Door (sliding Type) 1008(1)d Aluminum Framed Glass Window (fixed Type) 1011(1)a Roll Up Door (steel) 1012(5)c Tempered Glass Wall,10mm 1013(2)a2 Fabricated Metal Roofing Accessory (gauge 26,flashing) 1014 1(b)2 Prepainted Metal Sheets (above 0.427mm, Rib Type, Long Span) 1032(1)c Painting Works(steel) 1047(2)c Structural Steel (trusses) 1047 2(b)structural Steel (purlins) Electrical 1100(10) Conduit, Boxes & Fittings (conduit Works/ Conduit Rough-in) 1101 (33) Wires And Wiring Devices 1102(1)panel Board With Main & Branch Breakers 1103(1)lighting Fixtures And Lamps 1111(1)reinforced Concete Pedestal Mechanical 1200(9) Kitchen Hood, Wall Mounted Spl 1 Racks, Steel In Gloss White Paint Finish ,5 Layer (0.4m X 0.9m) Spl 2 Reefer Van, 40 Foot Spl 3 Lavatory, Stainless Steel , Manually Operated, (0.5m X 1.5m) Spl 4 Furnitures And Fixtures (split Type Inventer Acu,1 Hp) "

Details: Description 1. The City Government Of Isabela, Basilan, Intends To Apply The Sum Of Nine Million Nine Hundred Ninety-four Thousand Four Hundred Seventy-eight (₱9,994,478.00) For Procurement Of Furnitures For The New City Hall Building. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The City Government Of Isabela, Basilan Now Invites Bids For Procurement Of Furnitures For The New City Hall Building To Wit: Stock Quantity Unit Of Item Description 1 17 Pcs Executive Table 2 17 Pcs Executive Chair Employee Tables: 3 7 Pcs A. 6-person Workstation 4 2 Pcs B. 4-person Workstation 5 110 Pcs C. Single Workstation 6 160 Pcs Employee Chair 7 2 Pcs Conference Table 8-seater 8 16 Pcs Conference Chairs 9 25 Pcs Visitors Chairs 10 28 Pcs Printer Tables 11 7 Pcs 3-seater Gang Chairs 13 2 Rolls Carpet (40 Sqm/roll) Filing Cabinets For Fabrication 14 1 Pcs Shoe Cabinet Partition (2.60m X 0.40m X 2.40m) 15 17 Pcs Cabinet-1 (3.60m X 0.45m X 0.90m) 16 1 Pcs Cabinet-2 (4.60m X 0.45m X 0.90m) 17 2 Pcs Cabinet-3 (1.40m X 0.45m X 0.90m) 18 1 Pcs Cabinet-4 (2.40m X 0.90m X 2.40m) 19 2 Pcs Cabinet-5 (1.60m X 0.90m X 2.40m) 20 2 Pcs Cabinet-6 (3.60m X 0.45m X 2.40m) 21 8 Pcs Cabinet-7 (2.40m X 0.45m X 2.40m) 22 5 Pcs Cabinet-8 (3.00m X 0.45m X 2.40m) 23 1 Pcs Cabinet-9 (2.00m X 0.45m X 2.40m) 24 2 Pcs Cabinet-10 (1.80m/4.80m X 0.45m X 2.40m) 25 1 Pcs Cabinet-11 (4.00m/3.45m X 0.45m X 2.40m) 26 3 Pcs Cabinet-12 (3.00m X 0.45m X 0.90m) 27 20 Pcs Folding Tables (size: 6ft, Color: White) 28 130 Pcs Folding Chairs (size: Regular, Color: White) 29 2 Unit Split Type Aircon W/ Installation, 1.0 Hp ( Koppel) 30 3 Unit Split Type Aircon W/ Installation, 1.5 Hp ( Koppel) 31 8 Unit Split Type Aircon W/ Installation, 2.0 Hp ( Koppel) 32 4 Unit Split Type Aircon W/ Installation, 3 Tons ( Koppel) 33 17 Unit Split Type Aircon W/ Installation, 5.0 Tons ( Koppel) 34 2 Pcs Panel Board W/ Center Main 200at30 Branches 18-30at 35 300 Meter 50mm Wire 36 9 Box #10 Thhn / Thwn 37 11 Box #8 Thhn / Thwn 38 200 Pcs Pvc 1-inch 39 18 Pcs Cabe W/ Cover 2,400x200x100mm 40 1 Installation Fee The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. 4. Interested Bidders May Obtain Further Information From Bids And Awards Committee City Of Isabela, Basilan And Inspect The Bidding Documents At The Address Given Below During 9:00 Am To 5:00 Pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders Starting On February 11, 2025 From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Php 10,000.00. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) Provided That Bidders Shall Pay The Nonrefundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. Bids Must Be Delivered To The Address Below On Or Before February 25, 2025 At 9:30 A.m., Sakayan Conference Room, Mayor’s Office, City Hall Complex, Sunrise Barangay, Isabela City, Basilan. All Bids Must Be Accompanied By A Bid Security In Cash, Certified Checks Or Bank Guarantee. Bid Opening Shall Be On February 25, 2025 At 9:30 A.m Sakayan Conference Room, Mayor’s Office, City Hall Complex, Sunrise Barangay, Isabela City, Basilan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 7. The Bac Isabela City, Basilan Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 8. For Further Information, Please Refer To: Roberto E. Arsena Ii Bac Secretariat Head Bac Office, 2nd Floor Main Building, City Hall Sunrise, Isabela City, Basilan Cp No. 09958110219 Vido F. Yu Bac Chairman Pre-bid Conference

Details: Description Republic Of The Philippines City Of Manila Barangay 152, Zone 14, District Ii Bids And Awards Committee January 31, 2025 D A T E Invitation To Bid Barangay 152, Zone 14, District Ii Invites Interested To Bid For The Supplies/materials And/or Equipments Of The Following: Item Quantity Unit Description 1 30 Box Bond Paper Legal Size 8.5 X 14, 5ream 2 30 Box Bond Paper Letter Size 8.5 X 11, 5ream 3 30 Ream Special Paper 200gsm 4 5 Box Panda Ballpen Black/red 12pcs 5 5 Box Pentel Pen Black 6 10 Btl Computer Ink Refill Black 250ml 7 10 Set Computer Ink Refill C,m,y 250ml 8 4 Pc Usb Flash Drive 3.0 128gb 9 10 Pc Correction Tape 8m 10 4 Pc Stamp Pad 11 6 Box Staple No. 10 12 70 Tank Refill Of Fire Extinguisher, 10lbs 13 1 Unit Heavy Duty, Mobile, Fabricated Steel Ladder The Bid Proposal Shall Be Submitted To The Barangay Treasurer On/or Before February 10, 2025 And It Will Be Opened Immediately On February 10, 2025 At 1:00 P.m. Infront Of The Barangay Activity Area (barangay Hall) Attending Bidders Or Their Authorized Representatives And Accounting, Manila Barangay Bureau (mbb) And Commission On Audit (coa) Representative. The Venue Of The Bidding Will Be At The Barangay 152, Zone 14, District Ii, Manila. Jervie Delos Reyes Bac Chairman Requesting Officer/end-user: Barangay 152, Zone 14, District Ii, Manila Approved Budget For The Contract (abc): Php 398,323.00 Source Of Fund: Ab 2025 Mooe – Php 190,000.00 Rrmf – Php 208,323.00 Total: Php 398,323.00 Copy Furnished: Accounting Department Commission On Audit (coa) Manila Barangay Bureau (mbb)

Details: Description Unit Item And Description Qty Bd. Ft. 12- 2" X 3" X 10" Coco Lumber 60 Bd. Ft. 10- 2" X 3" X 8" Coco Lumber 27 Kilogram Assorted Cwn 2 Piece 8' X 8' Tarpaulin 1 Pair Safety Shoes 5 Piece Safety Helmet 5 Pair Safety Gloves 5 L.s. Safety Kit 1 Piece Warning Signs 5 Bag Portland Cement 92 Cu. M. Coarse Aggregate 2 Cu. M. Fine Aggregate 1 Kilogram 20 Pcs- 10mmᶲ X 6m Rsb 75 Kilogram 23 Pcs- 12 Mmᶲ X 6m Rsb 123 Kilogram #16 Tie Wire 10 Piece 4' X 8' X 1/2" Phenolic Board 4 Bd. Ft. 16 Pcs- 2" X 2" X 12' Form Lumber 64 Kilogram 2" Cwn 2 Kilogram 3" Cwn 2 Piece 4" Chb 415 Cu. M. Fine Aggregate 3 Kilogram 26 Pcs- 10mmᶲ X 6m Rsb 97 Kilogram #16 Gi Tie Wire 5 Set 2.100m X 0.90m Wooden Panel Swing Door W/ Jamb And Hinges 2 Sq. Ft. 4 Sets- 1.20m X 1.50m Alum Framed Sliding Window Clear Glass 80 Set 6.90m X 3.00m Pre- Fabricated Removable Partition Wall 2 Pail Flat Latex Paint 3 Pail Semi- Gloss Latex 3 Gallon Masonry Putty 2 Piece 4" Paint Brush 4 Piece 2" Paint Brush 4 Set 7" Roller Brush With Tray 8 Piece 60cm X 60cm Glazed Tiles 247 Bag Tile Grout 14 Bag Tile Adhesive 21 Cu.m Fine Sand 4 Piece 4" Diamond Cutter 5

Details: The National Aeronautics And Space Administration (nasa)/george C. Marshall Space Flight Center (msfc) Is Hereby Soliciting Information From Potential Industrial Sources Pertaining To The Development Of State-of-the-art X-ray Grazing Incidence Optics In A Conventional Wolter-i Optical System (i.e. Mirrors, Optical Mounts) Using Space Qualified Optical Materials With Demonstrated Precision Manufacturing And Alignment Capability That Can Ultimately Achieve Arc-sec Angular Resolution In A Relative Space Environment. nasa Msfc Is Seeking Capability Statements From All Interested Parties, Including All Socioeconomic Categories Of Small Businesses And Historically Black Colleges And Universities (hbcu)/minority Institutions (mi), And Members Of The Underserved Communities As Defined By Executive Order 13985, Advancing Racial Equity And Support For Underserved Communities Through The Federal Government, For The Purposes Of Determining The Appropriate Level Of Competition And/or Small Business Subcontracting Goals For The Development Of High Performing X-ray Grazing Incidence Segmented Optics And Precision Optical Mounts In A Conventional Wolter-i Configuration Capable Of Achieving Arc-second Angular Resolution Performance In A Relative Space Environment. The Government Reserves The Right To Consider A Small, 8(a), Women-owned (wosb), Service-disabled Veteran (sd-vosb), Economically Disadvantaged Women-owned Small Business (edwosb) Or Hubzone Business Set-aside Based On Responses Received. nasa Msfc Solicits Information From The Industrial Community Pertaining To State-of-the-art X-ray Grazing Incident Segmented Optics For Space Applications, Specifically Of Interest Is Industrial Capability To Design, Manufacture, Integrate, Align, And Test Of Segmented Glass X-ray Optics. msfc Seeks This Information To Identify A Potential Supplier For X-ray Mirrors (parabolic (p) & Hyperbola (h) Prescription Summary Shown In Table 1 And Dimensions As Shown Below In Fig.1), Mounting, And Optical Alignment In A Conventional Wolter I Optical Configuration. The Potential Supplier Should Have The Capability To Meet The Following: critical Parameters: measurement Capability Of Grazing Incidence Segmented Optics To Quantify Figure Error And Surface Roughness: Figure/shape Reconstructions From Profile Measurements, With Accuracy Of 0.1 Arcsecond, And Surface Roughness Measurement Capability With An Accuracy Of 0.1 Nm Rms, polishing And Super-polishing Processes For Grazing Incidence Segmented Optics Capable Of Achieving 0.3 Nm Rms Roughness And 1 Arcsecond Angular Resolution, capability To Measure And Reduce Mid-spatial Frequency Error Down To 0.5 Nm Rms, capability To Apply Surface Coating To Mirrors (type Of Coatings Under Consideration: Gold, Platinum, Or Iridium), optical Assembly And Integration Capability And Expertise With Space Qualified Adhesive Bonds, experience With X-ray Measurement Procedures And Access To X-ray Measurement Facility That Can Obtain And Quantify The Point-spread-function (psf) Of The Aligned P&h Mirror Pair, And access To An Operational Facility Capable Of Optical Alignment Of A Wolter Optics Assembly With ~1 Arcsecond Precision. table 1 - Telescope Prescription Summary See Attachment. fig. 1 P & H Mirror Dimensions See Attachment. high-spatial Frequency Errors (characterized By Spatial Scales Of A Few Microns And Smaller), Commonly Referred To As Micro-roughness Or Finish, Can Impact Performance Due To Scattering Or Reduction In The Reflectivity Of Applied Coatings. Coating-induced Stresses, Mounting-induced Distortions, And Alignment Errors Can Further Degrade The Angular Resolution Of The Mirror Assembly Consisting Of The Individual Mirror Elements. Therefore, In Addition To Requiring The Capability To Manufacture Precisely Figured Segments, This High-resolution Mirror Development Must Ultimately Show The Capability To Coat The Mirrors With Thickness On The Order Of 50 Nm Or Less And Coating Uniformity Of +/- 1% Change, While Maintaining The Defined Performance Requirements, Namely Angular Resolution And Effective Area. this Notice Seeks The Above Information To Assist In Evaluating Current Manufacturing Capabilities, Feasibility And Schedule For Delivering A Space-based Optical System For A High-performance Science Instrument As Described Above Identifying Promising Development Paths Of Less Than 24 Months For Delivery Of 3 Sets Of Coated Glass Mirrors, Mounted, & Aligned Flight Mirrors. no Solicitation Exists; Therefore, Do Not Request A Copy Of The Solicitation. If A Solicitation Is Released, It Will Be Synopsized On Sam.gov. Interested Firms Are Responsible For Monitoring This Website For The Release Of Any Solicitation Or Synopsis. interested Firms Having The Required Capabilities Necessary To Meet The Above Requirement Described Herein Should Submit A Capability Statement Of No More Than Eight (8) Pages Using 12-pt Font Indicating The Ability To Perform All Aspects Of The Effort Described Above. The Respondents Capability Package Shall Address The Following: recognizing That Robust Grazing-incident X-ray Optics Development Is Crucial To A Compelling And Executable Solution For Future Space-based Science Instruments, This Notice Seeks Input That Will Describe (1) The Current Capability And Readiness To Address Critical Parameters As Shown Above, (2) The Feasibility And Schedule For Development Of One Set Of Prototype Mirrors (parameters & Dimensions As Shown In Table 1 & Fig. 1), Prototype Optical Mounts, And Alignment As A Prototype Mirror Assembly To Demonstrate Capabilities Leading To An Optical Systems Which Meets Critical Parameters. In Addition, This Notice Requests Sufficient Detail To Describe The High-resolution Mirror Fabrication Processes To Be Used Including, Facilities, Mounting And Assembly Approach For Space Application; Alignment; Metrology; Mirror Coating Processes, And Methods For Stress Mitigation. all Responses Shall Be Submitted Electronically Via Email To Ms. Kathy Cooper, Kathy.cooper@nasa.gov No Later Than February 14, 2025, At Noon Cst. Please Reference State-of-the-art X-ray Grazing Incidence Optics In Any Response. The Body Of The Email Message Should Identify And Provide The Name, Institutional Or Organizational Affiliation, Address, Telephone Number And Email Address Of The Primary Point-of-contact For The Response. Other Key Institutions, Companies And Individuals Collaborating On This Sources Sought Notice Response Should Also Be Identified With Primary Point-of-contact Information. Responses Must Be Received By The Due Date Specified Above, Shall Use 12-pt Font Or Larger, And Should Not Exceed Eight (8) Pages In Length. this Synopsis Is For Information And Planning Purposes Only And Is Not To Be Construed As A Commitment By The Government Nor Will The Government Pay For Information Solicited. Respondents Will Not Be Notified Of The Results Of The Evaluation. material Suitable For Full And Open Distribution Is Requested And Submittals Shall Be Considered Approved By The Providing Organization To Be Suitable For Full And Open Distribution. Respondents Should Not Submit Proprietary Information, Export-controlled Information (including Ear And Itar Restricted Information), Nor Confidential Information In Response To This Sources Sought Notice Unless Such Information Is Clearly Segregated And Marked As Proprietary Or Confidential.

Details: Description Invitation To Bid Supply And Delivery Of 2,275kg Gelcoat And (40) Other Items Under Purchase Request No. 0039-25 1. The Provincial Government Of Misamis Oriental, Through The Sb 6 Ordinance No. 1628-2024-excise Tax-fabrication Of Fiber Glass Boats Intends To Apply The Sum Of Five Million Nine Hundred Nineteen Thousand Seven Hundred Ninety-one Pesos Fifteen Centavos (php5,919,791.15) Being The Abc To Payments Under The Contract For The Supply And Delivery Of The Following: 1 Gelcoat, Promoted, Isophthalic 2,275 Kg 2 Chopped Strand Mat (csm) 300 1,060 Kg 3 Chopped Strand Mat (csm) 450 4,105 Kg 4 Woven Roving (wr) 600 2,965 Kg 5 Pre-mixed Resin, Thixotropic 17,350 Kg 6 Mekp Hardener, Imported 590 Liters 7 Release Agent/wax (paste) 37 Gals 8 Body Filler 46 Gals 9 Styrene Monomer 930 Liters 10 Lacquer Thinner 930 Liters 11 Cobalt Accelerator 20 Liters 12 Calsomine Powder 46 Kg 13 Paint Brush, 3", White Bristle 375 Pcs 14 Baby Paint Roller, 3", Cotton 375 Pcs 15 Paint Roller, 4" Cotton 560 Pcs 16 Pail, Small 50 Pcs 17 Dipper 40 Pcs 18 Waste Rag 55 Kg 19 Sand Paper #360 375 Pcs 20 Sand Paper #120 190 Pcs 21 Cutting Disc 4" 190 Pcs 22 4" Sanding Disc #36 375 Pcs 23 4" Flap Disc Grit #36 190 Pcs 24 Cutter, Heavy Duty, W/extra Blades 40 Pcs 25 Putty Knife (palita) 50 Pcs 26 Dust Mask 200 Pcs 27 Aluminum Roller, 1/2" X 3" 50 Pcs 28 Aluminum Roller, 3/4" X 6" 50 Pcs 29 Adjustable Volume Dispenser 20 Pcs 30 Demoulding Wedge 10" 40 Pcs 31 Rubber Mallet 20 Pcs 32 Modeling Clay, Bar, Non-hardening 20 Bars 33 Gloves, Cotton 100 Pairs 34 Safety Glasses 100 Pcs 35 Angle Grinder 4' With Cutting Disc 30 Pcs 36 Electric Handrill 5 Pcs 37 Drill Bit 5 Sets 38 Flat Cord Wire #14 (100meters: 20m X 5) 100 Rolls 39 Heavy Duty Outlet 3 Gang Fat (black) 5 Pcs 40 Heavy Duty Rubberized, Male Plug 5 Pcs 41 Heavy Duty Extension #16 Cord Wire, 5 Meter Long, 3 Gang Flat (black) 15 Units Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening 2. The Provincial Government Of Misamis Oriental Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 30 Calendar Days. Bidders Should Have Completed, Within 2 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Bids And Awards Committee Thru The Bac Secretariat At The Procurement Unit, Capitol Building, Cagayan De Oro City And Inspect The Bidding Documents At The Address Given Below During [8:00am-5:00 Pm]. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On [january 23, 2025 To February 12, 2025; 8:00am-3:00pm] From The Given Address Bids And Awards Committee Thru The Bac Secretariat At The Procurement Unit, Capitol Building, Cagayan De Oro City And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of [php10,000.00]. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment. 6. The Pgmo Through Its Bids And Awards Committee Will Hold A Pre-bid Conference On January 30, 2025 At 10:30 Am., Bids And Awards Committee Office, Conference Room, 2ndflr., Capitol Bldg., Velez St., Cagayan De Oro City, Misamis Oriental, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Bids And Awards Committee Office, Conference Room, 2nd Floor, Capitol Building, Cagayan De Oro City. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Submission Of Bids Shall Be On February 13, 2025; 8:00am-10:00am And Bid Opening Shall Be On February 13, 2025; 10:30am At The Given Address Bids And Awards Committee Office, Conference Room, 2nd Floor, Capitol Building, Cagayan De Oro City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Provincial Government Of Misamis Oriental Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Ms. Jacquiline M. Noble Head, Bac Secretariat C/o Procurement Unit Capitol Building Cagayan De Oro City. Bacmisamisoriental@gmail.com Www.misamisoriental.gov.ph Sgd Filemon R. Aguilar, Jr. Bac, Chairman

Details: Description 1. The Municipal Government Of Coron, Palawan, Through The 2025 Trust- Fund Intends To Apply The Sum Of One Million Seven Hundred Ninety- Eight Thousand Six Hundred Eighty- Five Pesos & 89/100 (php1,798,685.89) Only Being The Abc To Payments Under The Contract For Supply And Delivery Of One (1) Lot Electrical Supplies And Materials For Municipal Dumpsite. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Item No. Unit Item Description Quantity 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Lot Assy Meters Meters Pieces Pieces Pieces Piece Pieces Pack Pieces Pieces Pieces Piece Pieces Pieces Pieces Pieces Pieces Assay Meters Meters Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Pieces Assy Meters Meters Pieces Pieces Pieces Packs Pieces Pieces Pieces Pieces Pieces Pieces Pieces Preliminaries Mobilization & Demobilization Materials Handling Ppe, Health & Safety Temporary Facility/bunkhouse Hauling & Transportation Oxygen Plant Panelboard Fabricated And Assembled In Nema-1 Surface Mounted Using G.i 1.5(gauge #16), W/hinge Type Type Dead Front, Base Plate, W/grounding And Neutral Bus Bar, Complete With Lugs, Powder Coated Finished Main 1 600at/600af 3p 230v 50kaic Mccb Abn803c Branches 1 30at/100af 3p 230v 35kaic Mccb Abn103c 1 75at/100af 3p 230v 35kaic Mccb Abn103c 1 100af 3p 230v Mccb Space 1 20at/100af 2p 230v 30kaic Mccb Abn52c 2 30at/100af 2p 230v 30kaic Mccb Abn52c 3 100af 2p 230v Mccb Space Wire, Thhn,150mm, Black Wire, Thhn,22mm, Black Lugs, Terminal, Long Barrel, Crimp Type 150mm (white) Lugs, Terminal, Long Barrel, Crimp Type 30mm (brown) Pipe, Pvc,3" Disc, Cutting,4”, Thin Tape, Rubber Tox & Screw,6mm×1" Rack, Secondary, 3w, 5/8 W/o Spools Insulator, Spool Screw, Tex, Metal, #2 Tex Screw, Adopter 8mm Bolt, Dyna 3/8 Cap, Entrance,3" Adaptor, Male,3”, Pvc W/locknut Elbow, Long,3”, Pvc U-bolt, Nut & Washer,3"× ¼" Garbage Mill Mixer Panelboard Fabricated And Assembled In Nema-1 Surface Mounted Using G.i 1.5 (gauge #16), W/hinge Type Type Dead Front, Baseplate/grounding And Neutral Busbar, Complete With Lugs, Powder Coated Finished Main 1 300at/400af 3p 230v 35kaic Mccb Abn403c Branches 2 100at/100af 3p 230v 35kaic Mccb Abn103c 1 60at/100af 3p 230v 30kaic Mccb Abn53c 2 40at/100af 3p 230v 30kaic Mccb Abn53c 5 30at/100af 2p 230v 30kaic Mccb Abn52c Wire, Thhn,150mm, Black Wire, Thhn,22mm, Black Lugs, Terminal, Long Barrel, Crimp Type 150mm (white) Lugs, Terminal, Long Barrel, Crimp Type 30mm (brown) Pipe, Pvc,3" Solvent Pipe Cement,100cc Gas, Butane Disc, Cutting,4”, Thin Screw, Tex, Metal, #2 Bolt, Dyna 3/8 Adaptor, Male,3”, Pvc W/locknut Elbow, Long,3”, Pvc U-bolt, Nut & Washer,3"× ¼" Tape, Electrical Garbage Mill Main Panel Fabricated And Assembled In Nema-1 Surface Mounted Using G.i 1.5 (gauge #16), W/hinge Type Type Dead Front Base Plate, W/grounding And Neutral Bus Bar, Complete With Lugs, Powder Coated Finished Main 1 500at/600af 3p 230v 50kaic Mccb Abn803c Branches 1 300at/400af 3p 230v 35kaic Mccb Abn403c 1 100at/100af 3p 230v 35kaic Mccb Abn103c 2 60at/100af 3p 230v 30kaic Mccb Abn52c 4 40at/100af 2p 230v 30kaic Mccb Abn52c 2 20at/100af 2p 230v 0kaic Mccb Abn52c Wire, Thhn,150mm, Black Wire, Thhn,22mm, Black Lugs, Terminal, Long Barrel, Crimp Type 150mm (white) Lugs, Terminal, Long Barrel, Crimp Type 30mm (brown) Pipe, Pvc,3" Tox & Screw,6mm×1" Screw, Tex, Metal, #2 Tex Screw, Adopter 8mm Bolt, Dyna, 3/8 Cap, Entrance,3" Adaptor, Male,3”, Pvc W/locknut Elbow, Long,3”, Pvc U-bolt, Nut & Washer,3"× ¼" 1 1 120 40 20 2 6 1 2 1 2 6 15 1 4 2 4 2 16 1 180 60 3 1 6 1 1 1 4 4 4 2 16 5 1 195 65 20 2 6 1 15 1 4 2 4 2 16

Details: Description Part I Other General Requirements B.3(1) Permits And Clearances L.s. 1.00 B.5(1) Project Billboard/signboard Each 2.00 B.7(1) Occupational Safety And Health Program L.s. 1.00 Total Cost (part I) Carried To Summary Php Part Ii Civil, Mechanical, Electrical And Sanitary/plumbing Works Part A Earthworks 800(2) Clearing And Grubbing L.s. 1.00 803(1)a Structure Excavation (common Soil) Cu.m. 71.22 804(1)a Embankment From Roadway/structure Excavation (common Soil) Cu.m. 44.25 804(2)a Embankment From Borrow (common Soil) Cu.m. 16.64 804(7) Gravel Fill Cu.m. 15.08 Total Cost (part A) Carried To Summary Php Part B Plain And Reinforced Concrete Works 900(1)i Structural Concrete (class A, 28days) Cu.m. 65.38 902(1)a1 Reinforcing Steel (deformed)(grade 40) Kg 15,740.58 903(2) Formworks And Falseworks Sq.m. 408.17 Total Cost (part C) Carried To Summary Php Part C Finishing And Other Civil Works 1046(2)a1 Chb Non-load Bearing (including Reinforcing Steel)(100mm) Sq.m. 326.95 1010(2)b Doors (wood Panel) Sq.m. 5.25 1043(1) Pvc Doors And Frames Sq.m. 2.52 1007(1)b Aluminum Framed Glass Door (swing Type) Sq.m. 11.76 1005(1) Residential Casement (steel) Sq.m. 6.30 1008(1)c Aluminum Glass Windows (awning Type) 1.08 Sq.m. 1003(17) Carpentry And Joinery Works (doors Jambs) L.s. 1.00 1004(2) Finishing Hardware (lockset & Hinges) L.s. 1.00 1051(1)a Railing L.s. 1.00 1027(1) Cement Plaster Finish Sq.m. 602.14 1016(1)a Waterproofing(cement-base) Sq.m. 133.82 1003(1)a1 Ceiling (4.5mm, Metal Frame, Fiber Cement Board) Sq.m. 199.28 1018(1) Glazed Tiles And Trims Sq.m. 27.59 1018(2) Unglazed Tiles Sq.m. 155.60 1032(1)a Painting Works(masonry/concrete) Sq.m. 968.19 1032(1)b Painting Works (wood) Sq.m. 20.27 1032(1)c Painting Works (steel) Sq.m. 211.81 1014(1)a2 Pre-painted Metal Sheets(above 0.427mm, Corrugated, Long Span) Sq.m. 113.76 1013(2)a Fabricated Metal Roofing Accessory (gauge 26(0.551mm), Ridge/hip Rolls) L.m. 15.80 1013(2)b Fabricated Metal Roofing Accessory (gauge 26(0.551mm), Flashing) L.m. 14.40 1047(8)a Structural Steel (trusses) Kg 2,152.48 1047(8)b Structural Steel (purlins) Kg 1,281.42 1047(5)a Metal Structure Accessories (bolts And Rods) Kg 5.68 1047(5)d Metal Structure Accessories (steel Plates) Kg. 101.74 1047(5)b Metal Structure Accessories (sagrods) Kg 23.43 1001(8) Sewer Lines Works L.s. 1.00 1001(9) Storm Drainage And Downspout L.s. 1.00 1002(4) Plumbing Fixtures L.s. 1.00 1002(24) Cold Water Lines L.s. 1.00 1001(6) Catch Basin L.s. 1.00 Total Cost (part C) Carried To Summary Php Part D Electrical 1100(10) Conduits, Boxes & Fittings(conduit Works/conduit Rough-in) L.s. 1.00 1101(33) Wires And Wiring Devices L.s. 1.00 1102(1) Panelboard With Main & Branch Breakers L.s. 1.00 1103(1) Lighting Fixtures L.s. 1.00 Total Cost (part D) Carried To Summary Php Part E Mechanical 1200(1) Ventilating Equipment L.s. 1.00 Total Cost (part E) Carried To Summary Php