Fabrication Tenders

Details: The Naval Air Warfare Center Weapons Division (nawcwd), China Lake, Ca, Intends To Issue An Rfp On A Sole Source basis To Jacobs Technology Inc. Based On The Federal Acquisition Regulation 6.302-1 Justification For Only One Responsible source And No Other Supplies Or Services Will Satisfy Agency Requirements. Jacobs Technology Inc. Is The Current Designer And operator Of The Air Launch Test Capability (altc), And The Only Source Able To Perform These Efforts In The Timeline Required To Meet Fleet Needs. this Effort Is A Follow-on Contract That Will Continue To Provide Upgrade, Redesign, And Operation Of The Current Launch Test Complex (ltc) At China Lake, Ca, To Include Site Re-activation, Test And Evaluation, Support To Enable Fielding Or Deployment, As Well As Upgrade, Design And Fabricate A Test Payload Tube (tpt), Launch Test Stand (lts), Launch Test Vehicle(s) (ltv), Advanced Payload Module (apm), Compressed Air Ejector (cae), Cross Flow (cf) Simulator And Control And Data Acquisition Next Generation (cdas-ng). The Upgraded Ltc, Now Referred To As The Air Launch Test (alt) Complex, Will Provide The Air Launch Testing/capability To Support The Cps Program. This Requirement Is To Also Provide Conceptual Design And Operation Of An Under Water Test (uwt) At The Underwater Launch Test (ult) Complex , Which Will Include Estimated Costs, Technology Maturity And Estimates On Build Schedules. This Data Will Be The Updated Basis For Government Trade Studies, Or Parametric Cost Estimates For The Ult Complex. The Alt And Ult Complex Will Not Only Aide In The Conceptual Design Of A New Weapons System, Through Qualification Of Hardware, Various Components And Systems, But Will Also Provide Risk Mitigation For The Testing Of The New Weapons System On A Ship, Submarine, Aircraft, And Land To Achieve The Hypersonic Capability As Directed By The Office Of The Secretary Of Defense (osd). this Notice Of Intent Is Not A Request For Competitive Proposals; However, Any Firm Believing It Can Fulfill The Requirement Identified Above May Submit A Written Response To Be Received At The Contracting Office No Later Than 18 Days After The Date Of Publication Of This Notice, Which Shall Be Considered By The Agency. The Written Response Shall Reference Solicitation Number N6893625r0015 (posted As N6893624r0025 With The Sources Sought; Here Updated For Fiscal Year 2025) And Provide A Capability Statement That Clearly Indicates The Firm’s Experience, Assets, Background, And Ability To Perform The Required Work Without Compromising The Quality, Accuracy, Reliability, And Schedule. interested Firms Must Be Registered In The System For Award Management (sam) Database At Https://sam.gov/ To Start Doing Business With The Federal Government. written Responses To This Notice Shall Be Submitted By E-mail To The Point(s) Of Contact Listed Below No Later Than 18 Days From This Notice Date.

Details: Description City Mayors Officeadmin Division P.r.no: 2025-02-1780 Date 02/02/2025 Item No. Qty Unit Name And Description Of The Article/s Approved Budget Contract Per Item Brand / Model Unit Price Total Amount 1 1 Pc Cylinder Head Gasket For Kia 2700 2,300.00 2 1 Pc Valve Cover Gasket For Kia 2700 1,000.00 3 1 Pc Oil Pan Gasket For Kia 2700 900.00 4 1 Pc Crank Shaft Oil Seal For Kia 2700 1,600.00 5 1 Pc Cam Shaft Oil Seal For Kia 2700 1,050.00 6 1 Pc/s Oil Filter For Kia K2700 2,700.00 7 1 Pc Fuel Filter For Kia K2700 4,300.00 8 1 Pc/s Air Cleaner For Kia 2700 3,600.00 9 1 Pc Hand Brake Cable For Kia 2700 5,000.00 10 1 Pc Glow Plug 700.00 11 1 Lot Cylinder Head Resurface 2,600.00 12 1 Lot Replace Valve Seal 1,000.00 13 1 Lot Valve Lapping 1,600.00 14 1 Lot Press In/out Valve Guide 1,600.00 15 1 Lot Replace Valve Seat Ring 2,250.00 16 1 Set Valve Guide 2,900.00 17 1 Set Valve Seal 1,850.00 18 1 Set Valve Seat Ring Fabricate 3,000.00 19 1 Lot Check Up Of Injection Pump Of Cleaning 4,100.00 20 1 Lot Labor Of Pull Out And Installation Of Engine And Dismantle Assemble Of Engine 25,100.00 21 1 Lot Labor Of Electrical Installation Of Heater Switch 4,700.00 22 1 Pc Front Door Opener Inner (l) 1,900.00 23 1 Pc Front Door Opener Inner (r) 1,900.00 24 1 Set Back Door Opener Assembly With Lock 8,050.00 Item No. Qty Unit Name And Description Of The Article/s 25 6 Liters Engine Oil 15w40, Multi-grade Hd Approved Budget Contract Per Item Brand / Model Unit Price Total Amount 3,120.00 26 2 1 Pcs Wiper Blade 21-18 Pc 1,200.00 27 Ex-haust Manifold Gasket 1,500.00 *** Nothing Follows *** Total Approved Budget For The Contract 91,520.00

Details: Description The Dr. Jose Fabella Memorial Hospital Hereby Invites Interested Suppliers To Submit Quotation For The: Particular Quantity Unit Cost Total Cost 1. Bench Storage With Foam, 4 Seater 2 Units ₱7,800.00 ₱15,600.00 2. Conference Table, 12 Seater Size: Length 360m X Width 140m X Height 75m, Material: Medium Density Fiberboard (laminated Wood), With 12 Seats Included With Fixed Armrest, High Back, Leather Seat 1 Piece ₱35,000.00 ₱35,000.00 3. Steel Filing Cabinet (4 Drawers) Vertical Steel 4 Layers Recessed Handle With Label Holder Cylinder Lock And Keys. 52” Height X 18.5” Width X 28.5” Depth 1 Piece ₱6,000.00 ₱6,000.00 4. Steel Open Type Shelves (7 Shelves), All Steel Legal Size, Fabricated W/ Heavy Gauges Material Steel Sheet #22. Equipped W/ 7 Adjustable/detachable Shelves. Controlled Of Each Shelves W/ Double Stiffener & Each Layer W/ Corner Plate With Slotted Angular Bar. Overll Dim.: 72”h X 36”w X 18”d With Rubber Footing. Brand New. Painted W/ 1 Coat Primer & 2 Coats High Enamel Smooth Gray Finish 2 Units ₱4,500.00 ₱9,000.00 5. Office Table, Pre-laminated Boards W/ Side Drawers & Cpu Cabinet W/ Side Table, 1400 X 700 X 750 1 Piece ₱15,000.00 ₱15,000.00 Total ₱80,600.00 Quotation Must Be Submitted To The Bac Secretariat Office, New Dr. Jose Fabella Memorial Hospital, Tayuman St., Manila On Or Before February 3 ,2025. To Submit Together With Quotation The Following Documents: 1. Philgeps Registration Certificate. 2. Mayor’s Permit 3. Omnibus Sworn Statement For Details, Please Contact The Bac Secretariat At Bacfabella@yahoo.com. The Djfmh Reserves The Right To Accept Or Reject Any Or All Quotations, To Waive Any Defects Found Therein And To Accept Such Quotations As May Be Considered Advantageous To The Government. The Djfmh-bac Assumes No Obligation To Compensate Or Indemnify The Bidders For Any Expenses Or Losses That May Be Incurred In The Preparation Of Quotations Nor Does It Guarantee That An Award Will Be Made. Maria Lu D. Andal, M.d. Chair, Bids And Awards Committee (for Infrastructure / Goods Non- Medical / Consulting Services / Non-medical Equipment /services)

Details: Description Invitation To Apply For Eligibility And To Bid The Municipality Of Barobo , Through Its Bids And Awards Committee (bac), Invites Contractors Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) To Apply For Eligibility And If Found Eligible, To Bid For The Hereunder Contract: Name Of Contract : Construction Of Child Development Center Project Location: Barangay Sudlon, Barobo, Surigao Del Sur Brief Description : Construction Of Child Development Center With Outdoor And Indoor Facilities With Floor Dimension Of 6.25 M X 8.25 M Total Area Of 74.34 Sq.m. Including Ramp And Toilet. Works Include Column Footing, Columns, Wall Footing, Slab On Grade Beams, Interior And Exterior Walls, Plastered And Painted Finish, Fabricated Window Steel Grills, Structural Trusses, Roof Insulation Roofing Works And Facilities And Amenities Of Indoor And Outdoor Equipment. Approved Budget For The Contract (abc) :php 2,200,000.00 Pcab License Category Required : Size Range: Small B; License Category : C & D Contract Duration : 75 Calendar Days The Schedule Of Bac Activities Is As Follows: Bac Activities Schedule 1. Pre Procurement Conference January 7, 2025-9:00 Pm 1. Receipt From Prospective Bidders Of Letters Of Intent(loi) Including Application For Eligibility January 9 - January 289, 2025-1:30 Pm 2. Issuance Of Bid Documents January 9- 27, 2025 - 5:00 Pm 3. Pre-bid Conference January 14, 2025 1:30 Pm 4. Receipt And Opening Of Bids January 28, 2025 -1:30 Pm Prospective Bidders Should Possess A Valid Pcab License Applicable To The Contract, Have Completed A Similar Contract With A Value Of At Least 50% Of The Abc, And Have Key Personnel And Equipment (listed In The Eligibility Forms) Available For The Prosecution Of The Contract. The Bac Will Use Non-discretionary Pass/fail Criteria In The Eligibility Check/screening As Well As The Preliminary Examination Of Bids. The Bac Will Conduct Post-qualification Of The Lowest Calculated Bid. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Implementing Rules And Regulation (irr) The Lgu-barobo Bac Will Issue To Prospective Bidders Eligibility Forms/bid Documents At The Office Of The Bac Chairman, Upon Their Submission Of A Loi, And Upon Their Payment Of A Nonrefundable Fee Of Five Thousand Pesos Only (php 5,000.00). Prospective Bidders Shall Submit The Eligibility Requirements/bidding Documents To The Address Below. Bac Chairman Blgu-sudlon, Barobo, Surigao Del Sur The Barangay Sudlon Municipality Of Barobo –bac Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bids. Prepared By: Susan A. Valles Bac Chairman

Details: Description 64 Sq.ft. Billboard, 4ft X8ft (tarpaulin Printed) 2 Bdls Lumber 1x2x8' 2 Bdls Lumber 2x2x8' 1 Kg Cw Nails 1-1/2" 1 Kg Cw Nails 3" 480 Bdft Lumber 2"x3"x12' 320 Bdft Lumber 2"x4"x12' 80 Bdft Lumber 2x2x8' 10 Kgs Cw Nails 3" 15 Kgs Cw Nails 4" 10 Kgs Cw Nails 5" 4 Pcs Moil 17 Bags Cement Type I-p 1 Cu.m. Sand 2 Cu.m. Gravel 3/4" 18 Pcs Deformed Bar 16mmø X 6m 27 Pcs Deformed Bar 10mmø X 6m 3 Kgs Tie Wire 5 Pcs Hacksaw Blade 6 Shts Ordinary Plywood 1/4" 4 Bndle Lumber 1" X 2" X 8' 6 Bndle Lumber 2" X 2" X 8' 150 Bdft Lumber 2" X 3" X 10' 6 Rolls Nylon String 5 Kgs Cw Nails 2" 5 Kgs Cw Nails 3" 5 Kgs Cw Nails 4" 325 Sq.m. Rib Type Pre-painted Roofing, 12' 2900 Pcs Tekscrew 8 Pcs Fabricated Ridge Roll 4 Boxes Blind Revits 4 Qrts Roof Sealant 1 Gal Flat Latex Paint 1 Gal Gloss Latex Paint 1 Gals Masonry Neutralizer 15 Gals Metal Primer Paint 4 Set Paint Roller 4" With Tray 12 Pcs Paint Brush 2" 8 Pcs Paint Brush 4" 90 Pcs C-purlins 2"x4"x1.4mm 71 Pcs Angle Bar 5mm X 2" X 6m 13 Pcs Angle Bar 6mm X 1-1/2" X 6m 6 Pcs Steel Plate, 400mm X 400mm 12 Pcs 5/8" Round Bar 12 Pcs Standard Turn Buckle 16mm 20 Bxs Welding Rod 10 Pcs Cutting Disk 13", Metal 50 Pcs Cutting Disk 4", Metal 6 Pcs Grinding Disk 4", Metal

Details: Constr Of Multipurpose Indoor Hall With Pcc Badminton Court size 57 Into 30 Into 30 Feet And Gym Size 30 Into 30 Into 15 feet Excavation Of Ground For Foundation 900mm X 600mm and 1m X 1m In Columns , Pcc 1 Ratio 4 In Foundation For brick Work With The Thickness Of 100 Mm , Pcc In Floor With bedding Of 3 Inch Rubble Stone And Pcc Work With 1 Ratio 1 point 5 Ratio 3 Mix M 20 Material Of 100 Mm Thickness , brick Work With 1 Ratio 6 Mix Material With Sub B Class Bricks work In Walls On 230mm Thick Wall , Plaster On Walls With 1 ratio 4 Mix Material Inside And Outside Maintaining thickness Of 15 Mm , Steel Bars In Column And Beam , Rcc work In Column And Beam With 1 Ratio 1 Point 5 Ratio 3 Mix m20 Material , Pillar Column Of 6 Inch Ms Round Pipe 4mm to 5mm Wall Thick With Base Plate On Bothside Of 16 Inch x16 Inchx10mm Thickness Height Of Pillar 22 Feet Include J bolts For Grouting Of Pillars 1mtr Long , Trusses Made Of 2 into 4 Inch Ms Pipe Of Wall Thickness 3 To 4 Mm Thick including Cutting Jointing Complete , Purlin Of 2 X 4 Inch rectangular Ms Pipe Of Thickness 3 To 4mm , Rafters Of 3x3 inch Square Pipe Of Thickness 3 To 4mm , Ms Pipe Support for Side Covering With 2x1 Point 5 Inch Pipe Of Thickness 3 To 4mm , Cross Bracing For Structure Of 2x4 Inch Ms Pipe Of thickness 3mm To 4mm , Aluminium Windows 6x6 Feet 06 nos And Doors 02 Nos Including All Accessories , Roof And side Covering With Colour Coated Aluminium Galvanized sheet 0. Point 45 To 0 Point 5 Mm Thick Including Claddings of 6 Into 6 Inch Size At All Corners Of The Shed , Electrification work Including Fans 8 Nos And Tube Lights 12 Nos And Switch sockets 20 Points , Ventilation Exhaust Fan 06 Industrial type Fixed On Top Of The Roof Incl All Attachments , Painting work Including Enamel Paint On Fabricated Work And whitewash On Cement Wall Inside And Outside , Badminton court Rubberized Mat Surface , Treadmill Commercial , dumbbells 2 And 4 And 5 And 10 Kg Weight , Rubberized weight Including Rods , Cross Trainer Commercial , Incline and Decline Bench , Exercise Bike Commercial , Gym Mat

Details: Description Item Quantity Unit Of Item Code Item Description Estimated Estimated No. Issued Unit Cost Total Cost B. Other General Requirements 1 1 Each B.5 Project Billboard/signboard 8,109.94 8,109.94 2 3 Mos B.7 Occupational Safety & Health Program 14,363.73 43,091.19 3 1 L.s B.9 Mobilization/demobilization 21,673.43 21,673.43 D. Earthworks 4 119 M³ 803(1)a Structute Excavation (common Soil) 299.89 35,686.91 5 105 M³ 804(1)a Embankment From Structure Excavation 210.00 22,050.00 6 14 M³ 804(4) Gravel Bedding 1,667.54 23,345.56 E. Plain And Reinforced Concrete Works 7 25 M³ 900(1)b Structural Concrete For Footing Tie Beam, Column, Suspended Slab, Girder/beam (class A, 285 Days) 8,714.35 217,858.75 8 1,976 Kg 902(1) Reinforcing Steel Of Reinforced Concrete Structures For One-story, Grade 40/grade 60 92.01 181,811.76 9 128 M² 903(2)a Formworks And Falseworks (for One-story Building) 947.89 121,329.92 F. Finishing Works 10 34 M 1013(2) Fabricated Metal Roofing Accessory (ridge/hip Rolls/flashing/counter Flashing/valley Roll) 539.79 18,352.86 11 680 M² 1014(1) Prepainted Metal Sheets (rib-type, Short Span/long Span, 0.5mm Thick) 719.28 489,110.40 12 821 M² 1032(1)c Painting Works Metal Painting 507.29 416,485.09 13 9,959 Kg 1047(2)b Structural Steel Roof Truss & Steel Plate 115.76 1,152,853.84 14 1,124 Kg 1047(2)c Structural Steel Purlins 118.52 133,216.48 15 72 Pc 1047(3)a Metal Structure Accessories (anchor Bolts) 863.89 62,200.08 16 261 Pc 1047(3)b Metal Structure Accessories (sagrods) 202.39 52,823.79 Page - 2 Subtotal: 1,817,579.28 Page - 1 Subtotal: 1,182,420.72 Grandtotal: 3,000,000.00

Details: Description Invitation To Bid For Construction Of Multi-purpose Building (auditorium) At Socorro, Oriental Mindoro 1. The Provincial Government Of Oriental Mindoro (pgom), Through The 20% Df 2025 Intends To Apply The Sum Of Twenty Nine Million Three Hundred Forty Eight Thousand Four Hundred Thirty Pesos And 73/100 (php 29,348,430.73) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For “construction Of Multi-purpose Building (auditorium) At Socorro, Oriental Mindoro (ib No. Cw-2025-064)”. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Oriental Mindoro (pgom) Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 299 Calendar Days. Bidders Should Have A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Item No. Description Qty/unit B.3 B.5 B.7 (1) 803(1)a 804(1)b A.1.1(3) 804(4) 903(2) 900(1)c2 900(1)c3 900(1)c4 900(1)c6 902(1)a 1003(1)a1 1003(1)g2 1003(1)e2 1046 (2) A1 1046 (2) A2 1027 (1) 1047(1) & 1047(10) 1014(1)b2 1013(2)a2 & 1013(2)b1 1032(1)a 1032(1)c 1008(1)a 1008(1)c 1008(1)d 1007(1)b 1010(2)b Spli 1018(2) 1018(5) 1051(6) Spli Spl Ii 1001(6) 1001(10) & 1002(24) 1002(4) 1001(11) 1101(33) 1100(10) 1102(1) 1103(1) 1208(1) 1102(7) 1102(13) 1102(8) 1102(16) Spl Iii Permits And Clearances Project Billboard/ Sign Board Occupational Safety And Health Program Structure Excavation Embankment From Borrow Construction Of Field Office For The Engineer Gravel Fill Formworks And Falseworks Structural Concrete, (footings And Slab On Fill) Class A, 28 Days Structural Concrete, (footings Tie Beams) Class A, 28 Days Structural Concrete, (columns) Class A, 28 Days Structural Concrete, (beams And Girders) Class A, 28 Days Reinforcing Steel (deformed), Grade 40 Ceiling (4.5mm Fiber Cement Board On Metal Frame) Ceiling (pvc On Metal Frame) Ceiling (pre-painted Metal Panel On Metal Frame) 100mm Chb Non-load Bearing (including Reinforcing Steel) 150mm Chb Non-load Bearing (including Reinforcing Steel) Cement Plaster Finish Structural Steel & Metal Structure Accessories Pre-painted Metal Sheets (above 0.472mm, Rib Type Long Span) Fabricated Metal Roofing Accessory Painting Works (masonry/concrete) Painting Works (steel) Aluminum Glass Window (sliding Type) Aluminum Glass Window (awning Type) Aluminum Glass Window (fixed Type) Aluminum Framed Glass Door (swing Type) Wood Panel Door Aluminum Door Unglazed Tiles Glazed Tiles Railings Customized Fabricated Pvc (cnc Cut) Stone Cladding Catch Basin Pipes With Fittings Connection And Cold Water Lines Plumbing Fixtures Septic Vault (concrete/chb) Wires & Wiring Devices Conduits, Boxes & Fittings (conduit Works/conduit Rough-in) Panelboard With Main And Branch Breakers Lighting Fixtures And Lamps Fire Alarm System Automatic Transfer Switch, Breaker Type Current Transformer Pad Mounted Distribution Transformer (oisc) With Complete Accessories Generator Fabricated Stainless Steel Signage 1.00 L.s. 1.00 Ea 9.97 Mo. 282.27 M3 2,451.00 M3 1.00 L.s. 37.12 M3 2,033.28 M2 138.58 M3 69.71 M3 82.67 M3 78.53 M3 48,582.00 Kg 276.69 M2 247.29 M2 99.17 M2 535.16 M2 1,322.38 M2 3,706.28 Sqm. 1.00 L.s. 1,059.00 Sq.m. 196.00 Im. 4,026.58 M2 1,427.10 M2 12.00 Sqm. 26.79 Sqm. 128.52 Sqm. 18.90 Sqm. 18.49 Sqm. 10.54 Sqm. 728.88 M2 109.15 M2 1.00 I.s 1.00 I.s 160.81 Sq.m 1.00 L.s. 1.00 L.s. 1.00 I.s. 1.00 L.s. 1.00 I.s 1.00 L.s. 1.00 L.s 1.00 L.s. 1.00 L.s. 1.00 Set 1.00 L.s. 1.00 L.s. 1.00 L.s. 14,399.53 Sq.in. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperatives, And Partnerships Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From Bids And Awards Committee Of The Pgom And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. To 5:00 P.m. Of Mondays To Fridays. The Pgom Will Hold A Pre-procurement Conference On January 23, 2025 At 9:00 A.m. At Bac Conference Room, Provincial Capitol Complex, Camilmil, Calapan City, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 31, 2025 To February 14, 2025 From Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty Five Thousand Pesos (php 25,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Pgom Will Hold A Pre-bid Conference On January 31, 2025 At 9:00 A.m. At Bac Conference Room, Provincial Capitol Complex, Camilmil, Calapan City, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before February 14, 2025 At 8:30 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On February 14, 2025 At 9:00 A.m. At Bac Conference Room, Provincial Capitol Complex, Camilmil, Calapan City, Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Activity. 10. The Pgom Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Engr. Jollie Ver E. Lasic Head, Bac Secretariat Pgo – Procurement Division Provincial Capitol Complex Camilmil, Calapan City, Oriental Mindoro (january 31, 2025) Atty. Earl Ligorio R. Turano Ii Bac Chairperson

Details: Description Construction Of Weaving Building At Brgy. Datal Tampal, Malungon Brgy. Datal Tampal, Malungon, Sarangani Province (contract No. Infra- 2025-33) January 28, 2025 1. The Provincial Government Of Sarangani, Through The Ab 2025 - 20% Df Intends To Apply The Sum Of Three Million Five Hundred Thousand Pesos Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Weaving Building At Brgy. Datal Tampal, Malungon, Sarangani Province With Contract No. Infra-2025-33 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Sarangani Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required Within One Hundred Thirty Six Calendar Days (136cd). Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From The Provincial Government Of Sarangani And Inspect The Bidding Documents At The Address Given Below From 9:00 A.m. Until 3:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 28, 2025 – February 18, 2025 From Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (₱5,000.00).the Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Provincial Government Of Sarangani Will Hold A Pre-bid Conference On February 4, 2025 At 2/f Conference Room, Pgso Building, Capitol Complex, Alabel, Sarangani And/or Through Videoconferencing/webcasting, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before February 18, 2025, At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On February 18, 2025, 9:00 A.m. At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Provincial Government Of Sarangani Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Delmor D. Pascual Bac Secretariat 2/f Pgso Building, Capitol Complex Alabel, Sarangani Province Landline/facsimile: 083 508 3008 E-mail: Bacsecsarangani@gmail.com Atty. Jenric Y. Garcia [insert Name And Signature Of The Bac Chairperson Or Authorized Representative] Sarangani Province Contract Number: Infra-2025-33 Name Of The Procuring Entity Name Of The Contract: Location Of The Contract: Sarangani Province Standard Form Number : Sf-infr-55 Abc Php 3,500,000.00 Revised On: August 11, 2004 Contract Id: Infra-2025-33 Contract Name: Construction Of Weaving Building At Brgy. Datal Tampal, Malungon Location: Brgy. Datal Tampal, Malungon, Sarangani Province Bill Of Quantities Calendar Days: 136cd Description Qty Unit Unit Price Amount No. (pesos) (pesos) B.5 Project Billboard 1.00 Each In Words: In Figures: Php In Figures: Php B.3 Permits And Licenses 1.00 L.s In Words: In Figures: Php In Figures: Php B.7(2) Occupational Safety And Health Program 1.00 L.s In Words: In Figures: Php In Figures: Php B.9 Mobilization/ Demobilization 1.00 L.s In Words: In Figures: Php In Figures: Php 801(1) Removal Of Structures And Obstruction 1.00 L.s In Words: In Figures: Php In Figures: Php 803(1)a Structure Excavation 35.38 Cu.m In Words: In Figures: Php In Figures: Php 803(3) Foundation Fill 3.71 Cu.m In Words: In Figures: Php In Figures: Php 1705(2) Backfill 22.82 Cu.m In Words: In Figures: Php In Figures: Php 900(1)c1 Structural Concrete 31.89 Cu.m In Words: In Figures: Php In Figures: Php 902(1)a Reinforcing Steel (deformed), Grade 40 4,104.28 Kgs. In Words: In Figures: Php In Figures: Php 903(1) Formworks And Falseworks 1.00 L.s In Words: In Figures: Php In Figures: Php 1027(1) Cement Plaster Finish 514.96 Sq.m In Words: In Figures: Php In Figures: Php 1013(2)a1 Fabricated Metal Roofing Accessory (ridge Roll) 11.08 Ln.m In Words: In Figures: Php In Figures: Php 1013(2)a2 Fabricated Metal Roofing Accessory (flashing) 19.00 Ln.m In Words: In Figures: Php In Figures: Php 1013(2)b1 Fabricated Metal Roofing Accessory (gutter) 44.00 Ln.m In Words: In Figures: Php In Figures: Php 1014(1)b1 Prepainted Metal Sheets 113.00 Sq.m In Words: In Figures: Php In Figures: Php 1001(6) Catch Basin 1.00 L.s In Words: In Figures: Php In Figures: Php 1001(9) Storm Drainage And Downspout 1.00 L.s In Words: In Figures: Php In Figures: Php 1001(8) Sewer Line Works 1.00 L.s In Words: In Figures: Php In Figures: Php 1001(11) Septic Vault 1.00 L.s In Words: In Figures: Php In Figures: Php 1002(4) Plumbing Fixtures 1.00 L.s In Words: In Figures: Php In Figures: Php 1002(24) Cold Waterline Works 1.00 L.s In Words: In Figures: Php In Figures: Php 1032(1)a Painting Works (concrete/masonry) 152.91 Sq.m In Words: In Figures: Php In Figures: Php 1046(2)a1 100mm Chb Non-load Bearing (including Reinforcing Steel) 121.11 Sq.m In Words: In Figures: Php In Figures: Php 1100(10) Conduits, Boxes & Fittings (conduit Works/ Rough-in) 1.00 L.s In Words: In Figures: Php In Figures: Php 1101(33) Wires And Wiring Devices 1.00 L.s In Words: In Figures: Php In Figures: Php 1102(1) Panelboard With Main & Branch Breakers 1.00 L.s In Words: In Figures: Php In Figures: Php 1103(1) Lighting Fixtures And Lamps 1.00 L.s In Words: In Figures: Php In Figures: Php 1051(1) Railings 4.20 M. In Words: In Figures: Php In Figures: Php Spl-1 Windows And Frames 1.00 L.s In Words: In Figures: Php In Figures: Php 1010(2)b Doors 9.14 Sq.m In Words: In Figures: Php In Figures: Php Spl-2 8mm X 150mm Fiber Cement Wood Plank Wall Finish 1.00 L.s In Words: In Figures: Php In Figures: Php Spl-3 Painting Works (steel) 1.00 L.s In Words: In Figures: Php In Figures: Php Spl-4 Ceiling Works 105.42 Sq.m In Words: In Figures: Php In Figures: Php Spl-5 Structural Steel And Fascia Board 1.00 L.s In Words: In Figures: Php In Figures: Php Spl-6 Tiles, Trims, Nosing Strips 1.00 L.s In Words: In Figures: Php In Figures: Php Total Bid Amount In Words: Pesos In Figures: Php Submitted By: Date: _________________ Name And Signature Of Bidder's Representative Position: Name Of Bidder:

Details: Description Republic Of The Philippines Department Of Public Works And Highways Aklan District Engineering Office Region Vi Toting Reyes St., Kalibo, Aklan Re-invitation To Bid For Contract Id No.: 25ga0060 Contract Name: Construction (completion) Of Multi-purpose Building (covered Court/ Evacuation Center), Barangay Calacabian, Libacao, Aklan 1. The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan, Through The Nep Fy 2025 Intends To Apply The Sum Of Php 2,475,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Contract Id No. 25ga0060 – Construction (completion) Of Multi-purpose Building (covered Court/ Evacuation Center), Barangay Calacabian, Libacao, Aklan. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction (completion) Of Multi-purpose Building (covered Court/ Evacuation Center) Contract Id No. : 25ga0060 Locations : Barangay Calacabian, Libacao, Aklan Scope Of Works : Completion Of Multi-purpose Building: Construction Of Six (6) Sets Of Footing, Six (6) Sets Of Column, Four (4) Sets Of Intermediate Beam And Four (4) Sets Of Roof Beam. Construction Of 6 Inches Chb Wall With A Total Area Of 92.12 Square Meters. Application Of Plastering And Painting Works. Fabrication And Installation Of Three (3) Sets Of Full Truss, Two (2) Sets Of Center Strut Beam Truss, Four (4) Sets Of Middle Strut Beam Truss And Four (4) Sets Of Side Strut Beam Truss. Installation Of Pre-painted Metal Sheet Roofing With A Total Area Of 383 Square Meters. Lastly, Application Of Painting Works On The Roof Framing Only. Approved Budget For The Contract : P 2,475,000.00 Contract Duration : 105 Calendar Days 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D For Small B. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enrol In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. Per Gppb Resolution No. 15-2021, Prospective Bidders Are Required To Upload And Maintain Current Of The Following Eligibility Documents In The Philgeps: A. Registration Certification (sec/dti Registration) B. Mayor’s/business Permit Or Its Equivalent Documents C. Tax Clearance D. Pcab License And Registration, And E. Audited Financial Statements Any Expired Document Among The Afore-cited Eligibility Documents Shall Render The Philgeps Platinum Registration Certificate As Automatically Suspended And Its Validity Shall Resume Only Once The Said Expired Document Is Already Updated With The Philgeps. For Recently Mayor’s Permit, The Recently Expired Mayor’s Permit Together With The Official Receipt As Proof That The Prospective Bidder Has Applied For Renewal Within The Period Prescribed By The Lgu Shall Be Accepted By The Philgeps For The Purpose Of Updating The Philgeps Certificate Of Platinum Registration And Membership. Consequently, The Prospective Bidders Shall Maintain An Updated And Current Philgeps Platinum Registration And Membership In The Civil Works Application (cwa). Prospective Bidders With Expired Eligibility Documents And Have Not Yet Updated Their Record In The Cwa Are Advised To Attached Their Newly Updated Platinum Registration And Membership Certificate, In The Technical Bid Documents And Not The Updated Particular Eligibility “class A” Document, To Be Considered Eligible By The Bids And Awards Committee. Only The Following Documents Are Required From Prospective Bidders Prior The Sale Of Bidding Documents, To Wit: A. Company Id Or Any Government Issued Id B. Authorization Letter (if Not Authorized Liaison Officer In The Cwa, I.e. Special Power Of Attorney For Sole Proprietorship; Or Board/partnership/joint Venture Resolution With Secretary’s Certificate For Corporation/partnership/joint Venture/cooperative) C. Letter Of Intent (for Foreign Funded Projects) 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan And Inspect The Bidding Documents At Bac (conference Room), Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan During Weekdays From 8:00 A.m To 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 8, 2025 – January 28, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 5,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan Will Hold A Pre-bid Conference On January 15, 2025 At 10:00 A.m At Bac Conference Room, Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_aklan@dpwh.gov.ph For Electronic Submission On Or Before January 28, 2025 At 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On January 28, 2025 Immediately After The Deadline Of The Submission Of Bids At Bac (conference Room), Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Maria Paula P. Garcia-custodio Oic – Procurement Unit (036) 268-3269 Email Add: Bactwgaklan@gmail.com Electronicbids_aklan@dpwh.gov.ph Ernan I. Bañes Bac Chairperson (036) 268-3269 Email Add: Bactwgaklan@gmail.com Electronicbids_aklan@dpwh.gov.ph