Fabrication Tenders

Details: This Is A Combined Synopsis And Solicitation For Commercial Items Prepared In Accordance With The Format In Far Subpart 12.6 –streamlined Procedures For Evaluation And Solicitation For Commercial Items, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotations Are Being Requested And A Written Solicitation Will Not Be Issued. This Solicitation Will Be Posted For Less Than Fifteen (15) Days In Accordance With Far 5.203(a)(2). request For Quote (rfq) Number Is N6660425q0158. the Naval Undersea Warfare Center Division Newport (nuwcdivnpt) Intends To Award A Sole Source Firm Fixed Price (ffp) Purchase Order To The University Of Central Florida For The Development And Acquisition Of A Hollow-core Fiber Optics. a Determination By The Government Not To Compete This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. All Responsible Sources May Submit A Capability Statement, Proposal, Or Quotation, Which Shall Be Considered By The Agency. Information Received Will Normally Be Considered For The Purposes Of Determining Whether To Conduct A Competitive Requirement In The Future. required Delivery Is A Period Of Performance February 2025 To February 2026. this Procurement Is Unrestricted As Concurred With By The Naval Undersea Warfare Center Division, Newport (nuwcdivnpt) Office Of Small Business Programs (osbp) And Small Business Administration Procurement Center Representative (sba Pcr). The North American Industry Classification System (naics) Code Is 541380. The Small Business Size Standard Is $19.0 Million. incorporated Provisions And Clauses Are Those In Effect Through The Most Current Federal Acquisition Circular (fac). the Following Clauses And Provisions Apply To This Solicitation: - Far 52.209-11, Representation By Corporations Regarding Delinquent Tax Liability Or A Felony Conviction Under Any Federal Law (feb 2016) - Far 52.212-1, Instructions To Offerors--commercial Products And Commercial Services - Far 52.212-2, Evaluation – Commercial Items; - - Far 52.212-3 Alt 1 – Offeror Representations And Certifications – Commercial Items Alternate 1 - Far 52.212-4, Contract Terms And Conditions--commercial Items; - Far 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders-commercial Items; the Following Dfars Clauses Apply To This Solicitation: 252.204-7008, Compliance With Safeguarding Covered Defense Information Controls 252.204- 7009, Limitations On The Use Or Disclosure Of Third-party Contractor Reported Cyber Incident Information 252.204-7012, Safeguarding Covered Defense Information And Cyber Incident Reporting 252.204-7015, Notice Of Authorized Disclosure Of Information For Litigation Support 252.204-7018, Prohibition On The Acquisition Of Covered Defense Telecommunications Equipment Or Services Apply To This Solicitation. full Text Of Incorporated Far/dfars Clauses And Provisions Are May Be Accessed Electronically At Https://acquisition.gov/far/ And Https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html. the Use In This Solicitation Of Any Federal Acquisition Regulation (48 Cfr Chapter 1) Clause With An Authorized Deviation Is Indicated By The Addition Of “(deviation)” After The Date Of The Clause. payment Will Be Via Procurement Integrity Enterprise Environment (piee) (formerly Known As Wide Area Workflow (wawf)). this Solicitation Requires An Active Registration With The System For Award Management (sam) Prior To Award, Pursuant To Applicable Regulations And Guidelines. Registration Information Can Be Found At Www.sam.gov. for Information On This Acquisition Contact Jennifer Vatousiou At Jennifer.m.vatousiou.civ@us.navy.mil the Nuwc Laser Transduction Lab’s (ltl) Research Efforts In Opto-acoustic Sound Generation Requires The Development And Acquisition Of A Hollow-core Fiber Optics. Suitable Off The Shelf Solutions Cannot Be Used Due To The Stringent Requirements Of The Ltl’s Optical System, Necessitating A Custom Designed And Manufactured Hollow-core Fiber. due To Restrictions Imposed By The Grant Funding Source, The Hollow-core Manufacturing Partner Must Be A Hispanic Serving Institute (hsi) As Defined In The Higher Education Act Of 1965. Additionally, The Manufacturing Partner Must Have A Fiber Draw Tower To Support In House Development Of The Hollow-core Fiber Design. the University Of Central Florida (ucf) College Of Optics And Photonics (creol) Fiber Optic Fabrication Facility (foff) Owns And Operates The Necessary Facilities To Manufacture And Characterize Hollow-core Fibers Including But Not Limited To Fiber Draw Towers. Additionally, Ucf Is Officially Recognized As An Hsi By The Department Of Education And Is The Only Such Institute To Own And Operate The Required Facilities To Manufacture Hollow-core Fiber Optics For The Ltl.

Details: The United States Department Of Commerce (doc), National Institute Of Standards And Technology (nist), Acquisition Management Division (amd) Intends To Negotiate, On A Sole Source Basis, With Amag Consulting, Llc, 221 Featherwood Court, Schenectady, Ny 12303 For The Purchase Of One (1) 300 Mm Si Wafer With Cu Damascene Patterns To Be Utilized By Nist’s Microsystems And Nanotechnology Division (mnd). The Statutory Authority For This Acquisition Is 41 Usc 3304(a)(1); Far 13.106-1(b). ***** Sole Source Determination Is Based On The Need To Acquire A Quantity Of One (1) 300 Mm Si Wafer With Cu Damascene Patterns To Advance The Chips Mission Of Developing Imaging And Measurement Solutions For Integrated Circuit (ic) Overlay Metrology Using A Scanning Electron Microscope (sem). minimum Requirements: description: 300 Mm Si Wafer With Cu Damascene Patterns quantity: 1 for The Sem Overlay Metrology Project, Nist Requires A 300 Mm Si Wafer Sample Of A Set Of Chips With Cu Damascene Patterns Suitable For Research And Development Efforts To Evaluate The Feasibility Of Physics-based Simulations And Ai-based Modeling As The Means To Improve The Performance Of Sem-based Overlay Metrology. 193 Nm Lithography Shall Be Used To Create The Overlay Metrology Patterns. It Is Also Advantageous, But Not Required To Place Other Than Overlay Dimensional Metrology Patterns On The Chips. All Chips Across The Wafer Shall Be Made Identical, Naturally Occurring Small Variations Due To Fabrication Processes Are Permitted. specifically, The Contractor Shall Provide One Wafer Containing At Least 12 Chips With The Following Overlay Metrology Parameters: 1. Cu Damascene Patterns With Box-in-box (bib), Image-based Overlay (ibo), Advanced Imaging Metrology (aim) Grating Patterns, And Hitachi-type Sem-based Overlay (sbo). Pattern Design Can Be Found In Pertinent Public Literature. 2. Sets Of Varying Size Bib, Ibo, Aim And Sbo Overlay Metrology Patterns Must Be Included In The Less Than 150 Mm To Smaller Than 50 Mm Range. 3. Overlay Patterns With Intentional, Small, Close To 1, 2, 5, And 10 Nm Variations Of Known Overlay Offsets (shifts) Must Be Provided. 4. The Wafer Must Be Covered With A Protective Layer To Safeguard The Integrity Of The Cu Patterns. 5. A Gdsii-based Map With Pattern Locations And Properties (size, Type, Offset, Etc.) Identification Must Be Provided. 6. Documentation About The Wafer Material, Dopant Type And Concentration, And The Patterning Process Shall Be Provided. market Research Was Conducted In October And November Of 2024, Including Internet Searches, Searches Of Gsa And Thomas Register, Speaking With Professional Contacts, And Reviewing Company Websites. Internet Searches Using Google.com Revealed Several Companies That Are Capable Of Manufacturing The Required Wafer, However They Would Require A Photomask To Manufacture The Required Wafer. Obtaining A Photomask Would Require Significant Additional Time And Cost To Obtain, Making These Options Cost-prohibitive In This Instance. Additionally, These Companies Will Only Manufacture The Required Wafers With A Minimum Order Greater Than One (1). Many Other Commercial Wafer Manufacturers Sell Wafers With No Required Patterns On Them, And Do Not Meet Nist's Requirements For A Cu Patterned Wafer. Amag Consulting Is The Only Company That Can Make The Required Wafer, Without A Photomask, In The Required Quantity. This Market Research Determined That Amag Consulting Is The Sole Manufacturer And Distributor Of The Equipment That Meets The Required Minimum Specifications. *****the North American Industry Classification System (naics) Code For This Acquisition Is 334416 – Semiconductor And Related Device Manufacturing, With A Small Business Size Standard Of 1,250 Employees. *****a Determination By The Government Not To Compete The Proposed Acquisition Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. *****no Solicitation Package Will Be Issued. This Notice Of Intent Is Not A Request For Quotations; However, All Responsible Sources Interested May Identify Their Interest And Capability To Respond To This Requirement. Interested Parties That Believe They Can Satisfy The Requirements Listed Above Must Identify Their Capability In Writing Before The Response Date Of This Notice. Only Responses Received By 11:00 A.m. Eastern Standard Time On January 29, 2025 Will Be Considered By The Government. Responses Shall Be Submitted Via Email To Jenna.bortner@nist.gov Or Ranae.armstrong@nist.gov. contracting Office Address: 100 Bureau Drive bldg. 301, Mail Stop 1640 gaithersburg, Maryland 20899-0001

Details: Description The Denr-environmental Management Bureau Region Iii Invites All Eligible Suppliers To Quote The Following: Procurement Of One (1) Lot Repair Of One (1) Unit Fumehood Exhaust And Motor Qty.: 1 Lot Abc: Php 600,000.00 Technical Specifications Of Exhaust Line: - Stainless Steel Hood - Dimension: 3.75ml X 1.07mh Using: T304 1mmthk X 8"ø Stainless Steel Fabricated Tube T304 1mmthk Stainless Steel 4-box All In Hairline Finish Technical Specifications Of Motor: -ac Operation -airflow Of 1699m3/h -dimension Of 254 (diameter) X 89mm (depth) -forward Direction Of Curve -round Fan Housing Shape -fan Speed Of 3250 Rpm (revolutions Per Minute) -ingress Protection (ip) Rating Of Ip56 -noise Level Of 70 Db -power Consumption Of 105w -ac Capacitor Inductance Motor -dual Ball Bearing -thermally Protected Motor -static Pressure Of 0.6 In H2o -supply Voltage Of 230v Ac -lead Wire Termination Type Additional Scope Of Work: - Conduct Initial Site Inspection And Assessment - Clean The Work Surface And Interior Walls Of Fumehood - Perform Machine Functionality Test - Submit Detailed Service Report - Reinstall Replacement Part - With Calibration Certificate ***nothing Follows***

Details: Description Technical Specifications: • 5tr, Minimum Of 57,000btu/hr, Inverter Type, Split Type, Floor Mounted, 220v, 3-phase, Remote Operated • (provide Brochure For Offered Unit); Scope Of Work: 2.1 Elevate Mounting Of Indoor Unit To Not Less Than 12”. 2.2 Fabricate/cast Mounting Of Indoor And Outdoor Unit 2.3 Install A/c Pipes Lines And Insulate, Support Pipelines With Angle Bars And Clamps. 2.4 Install Electrical Connection On Indoor And Outdoor Units Including Circuit Breaker With Weather Proof Panel, Thw Feeder Lines With Pipes From Condensing Unit To Electrical Panel, Electrical Pvc(conduits, Adaptors, Couplings, Etc) And Pvc Cement For Jointing Conduits 2.5 Conduct Flushing, Vacuuming, Leak Testing, Refrigerant Charging, Soldering & Commissioning 2.6 Restore All Damages And Seal Openings 2.7 Conduct 1-day Leak/pressure Test 2.8 Others Needed For Installation And Operation Of A/c Unit Note: 3.1 Technician Or Any Personnel From The Contractor Of Air-con Units Shall Not Be Allowed To Stay Overnight At Pttc Premises. 3.2 Must Observe Pttc General Terms And Conditions. 3.3 Must Wear Prescribed Id And Working Uniform At All Times While Inside The Pttc Premises Delivery: 4.1 Delivery Date: 60 Calendar Days Warranty: 5.1 1 Year Warranty

Details: Description Permits And Clearances; Project Billboard/signboard; Occupational Safety And Health; Mobilization/demobilization; Clearing And Grubbing; Individual Removal Of Tress, 150 – 300 Mm Dia.; Structure Excavation, Common Soil; Embankment From Roadway/structure Excavation, Common Soil; Embankment From Borrow, Common Soil; Gravel Fill; Structural Concrete, 3000 Psi, Class A, 28 Days; Reinforcing Steel (deformed), Grade 40; Formworks And Falseworks; Soil Poisoning; Plumbing Works; Ceiling, 4.5 Mm, Metal Frame, Fiber Cement Board; Carpentry And Joinery Works; Finishing Hardware; Aluminum Glass Windows, Awning Type; Frames, Jambs, Sills, Head, Transoms And Mullions; Doors Wood Panel; Fabricated Metal Roofing Accessory, Gauge 26 (0.551 Mm), Flashing; Pre-painted Metal Sheets, Above 0.427 Mm, Corrugated, Long Span; Glazed Tiles And Trims; Unglazed Tiles; Cement Plaster Finish; Painting Works, Masonry/concrete; Painting Works, Wood; Painting Works, Steel; Metal Deck Panel; Pvc Doors And Frames; Chb Non-load Bearing (including Reinforcing Steel), 100 Mm; Chb Non-load Bearing (including Reinforcing Steel), 150 Mm; Structural Steel; Railing; Conduits, Boxes & Fittings (conduit Works/conduit Rough-in); Wires And Wiring Devices; Panelboard With Main & Branch Breakers; Lighting Fixtures; Air Conditioning System, Package/split Type

Details: Description 40 Pcs Corrugated Gi Sht Ga24x8 Ft Long 500 Pcs Self Drilling Screw 2-1/2 2 Pcs Rotary Ventilator 6 Lin.m. Fabricated Stainless Gutter 4" Width 16 Pcs Roof Sealant 1/4 Qrt 1 Roll Nylon Screen Net,black 42 Pcs Marine Plywood 1/4 Thk 2 Bxs Black Screw 3/4" (200pcs/box) 2 Pcs Hand Riveter, Heavy Duty 6 Gals Epoxy Primer Paint 4 Pcs Paint Roller Brush 8", Hd 2 Pcs Plastic Paint Tray 1 Gal. Glazing Putty 20 Pcs Sand Paper, Assorted Grit 1 Pc Flood Light 150watts 15 Pcs Led Bulb 20watts 5 Pcs Led Bulb 13watts 6 Sets Ball Lamp, Assembly 3 Pcs Receptacle 1 Roll Duplex Wire16/2 1 Unit Wall Fan, 18 Inches 1 Pc Switch, 3 Gang 10 Pcs Pen Light Housing 6" 4 Sets Convience Outlet Flush Type 2 Gang 2 Rolls Electrical Rubber Tape 50 Ltrs Fuel 4 Pcs Disc Cutter 4" Width 2 Kgs Cwn, Assorted Sizes

Details: Description Item No. Description Unit Qty A.1.1 Provision Of Field Office And Quarters For The Engineers Lot 1.00 B.5 Project Billboard/sign Board Ea 1.00 B.7 Occupational Safety And Health Program Lot 1.00 B.9 Mobilization / Demobilization L.s. 1.00 803(1)a Structure Excavation (common Soil) - Manual Cu.m 31.25 900(1 )c1 Structural Concrete, Class A - 28 Days Cu.m 28.25 902(1)a Reinforcing Steel Of R.c. Structures, Grade 40 Kg 3,743.31 903(2) Formworks And Falseworks Sq.m. 84.00 1046(2)a1 100mm Chb Non Load Bearing (including Reinf. Steel) Sq.m. 145.73 1027(1) Cement Plaster Finish Sq.m. 291.46 1047(2)a Structural Steel Truss Kg. 922.24 1047(2)b Structural Steel Purlins Kg. 772.61 1013(2) Fabricated Metal Roofing Accessories Ln.m. 63.44 1014(1)b1 Prepainted Metal Sheets Sq.m 109.20 1007 Aluminum Frame Glass Door (sliding Type/swing Type) Sq.m. 16.38 1008 Aluminum Glass Window Sq.m. 11.16

Details: Description Technical Specifications: • 5tr, Minimum Of 57,000btu/hr, Inverter Type, Split Type, Floor Mounted, 220v, 3-phase, Remote Operated • (provide Brochure For Offered Unit); Scope Of Work: 2.1 Elevate Mounting Of Indoor Unit To Not Less Than 8”. 2.2 Fabricate/cast Mounting Of Indoor And Outdoor Unit 2.3 Install A/c Pipes Lines And Insulate, Support Pipelines With Angle Bars And Clamps. 2.4 Install Electrical Connection On Indoor And Outdoor Units Including Circuit Breaker With Weather Proof Panel, Thw Feeder Lines With Pipes From Condensing Unit To Electrical Panel, Electrical Pvc(conduits, Adaptors,couplings, Etc) And Pvc Cement For Jointing Conduits 2.5 Conduct Flushing, Vacuuming, Leak Testing, Refrigerant Charging, Soldering & Commissioning 2.6 Restore All Damages And Seal Openings 2.7 Conduct 1-day Leak/pressure Test 2.8 Others Needed For Installation And Operation Of A/c Unit Note: 3.1 Technician Or Any Personnel From The Contractor Of Air-con Units Shall Not Be Allowed To Stay Overnight At Pttc Premises. 3.2 Must Observe Pttc General Terms And Conditions. 3.3 Must Wear Prescribed Id And Working Uniform At All Times While Inside The Pttc Premises Delivery: 4.1 Delivery Date: 60 Calendar Days Warranty: 5.1 1 Year Warranty

Details: Description Technical Specifications: • 220 Volts, 1-phase, With Remote Control • Smart And Can Be Controlled Thru Cellular Phone. • Can Be Connected Thru Wi-fi • Split Type, Wall- Mounted • (provide Brochure For Offered Unit); Scope Of Work: 2.1 Fabricate/cast Mounting Of Outdoor Unit And Indoor Unit. 2.2 Supply And Installation Of Drain/condensate Pump Including Pipes And Wires. 2.3 Install A/c Pipe Lines And Insulate, Support Pipelines With Angle Bars And Clamps 2.4 Install Electrical Connection On Indoor And Outdoor Units Including Circuit Breaker With Weather Proof Panel, Thw Feeder Lines With Pipes From Condensing Unit To Electrical Panel, Electrical Pvc (conduits, Adaptors, Couplings, Etc) And Pvc Cement For Jointing Conduits 2.5 Conduct Flushing, Vacuuming, Leak Testing, Refrigerant Charging, Soldering And Commissioning 2.6 Restore All Damages And Seal Openings 2.7 Conduct 1-day Leak/pressure Test 2.8 Others Needed For Installation And Operation Of A/c Unit Note: 3.1 Technician Or Any Personnel From The Contractor Of Air-con Units Shall Not Be Allowed To Stay Overnight At Pttc Premises. 3.2 Must Observe Pttc General Terms And Conditions. 3.3 Must Wear Prescribed Id And Working Uniform At All Times While Inside The Pttc Premises Delivery: 4.1 Delivery Date: 45 Days Warranty: 5.1 1 Year Warranty

Details: Description Republic Of The Philippines Technical Education And Skills Development Authority Simeon Suan Vocational And Technical College Pag-asa, Bansud, Oriental Mindoro Request For Quotation ____________________________________________________________ Date:__________________ ____________________________________________________________ Please Quote Your Lowest Price On The Items Listed Below, Subject To The General Conditions On The First Page, Stating The Shortest Time Of Delivery And Submit Your Quotation Daily By Your Representative Not Later Than Five (5) Days In The Return Envelope. Notes: 1. All Entries Must Be Typwritten Or Handwritten. 2. Delivery Period Is Within Seven (7) Calendar Days. 3. Warranty Shall Be For A Period Of Six (60 Months For Supplies And Materials, One (1) Year For Equipment From Date Of Acceptance By The Procuring Entry. 5. Bidders Shall Submit Original Brochures Showing Certifications For The Product Of Being Offered. Ross G. Faidalan Gennard Montiel Angelito O. Aquino Canvassers Item No. Quantity Unit Of Issue Goods And Its Specification Unit Cost Total Cost 1 1 Unit Fabricated Storage And File Cabinet 2 1 Unit Printer With Scanner 3 1 Unit Water Dispenser 4 1 Pc Heavy Duty Extension Wire 5 1 Box Long Bond Paper 6 1 Box A4 Bond Paper 7 2 Box Black Ballpen Sub-total Grand Total Signature Over Printed Name Of Store Representative Address/ Contact Number Business Tin Helen C. Suan __________________________ Bac Chairman End-user