Fabrication Tenders

Details: Description Republic Of The Philippines Provincial Government Of Eastern Samar Capitol Building, Borongan, Eastern Samar, 6800 Tel No. (055)-560-8312 E-mail Address: Esamar.bac@gmail.com Bids And Awards Committee (bac) Invitation To Bid For Construction Of Multi-purpose Building (covered Court) Phase-2, Brgy. Balocawe, Oras, Eastern Samar 1. The Provincial Government Of Eastern Samar, Through The 20% Edf 2025 Intends To Apply The Sum Of Three Million Pesos Only (php3,000,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract Itb No. 2025-01-044 Construction Of Multi-purpose Building (covered Court) Phase-2, Brgy. Balocawe, Oras, Eastern Samar. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Eastern Samar Now Invites Bids, Item No. B.5 – Project Billboard/sign Board (1.00 Each), Item No. B.7(1)- Occupational Safety And Health Program (4.00 Month), Item No. B.9 – Mobilization/demobilization (1.00 L.s.), Item No. 1047(2)b – Structural Steel Roof Truss (9,306.03 Kg), Item No. 1047(2)c – Structural Purlins (2,923.03 Kg), Item No. 1047(5) – Metal Structures Accessories (steel Plate) (712.72 Kg), Item No. 1047(3)b – Metal Structure Accessories (sag Rods) (288.00 Pc), Item No. 1047(3)a – Metal Structure Accessories (anchor Bolts) (48.00 Pc), Item No. 1047(3)d – Metal Structure Accessories (cross Bracing) (24.00 Pc), Item No. 1047(3)c – Metal Structure Accessories (turn Buckle) (24.00 Pc), Item No. 1014 – Prepainted Metal Sheets, Long Span (372.28 Sq.m.), Item No. 1013(2)a2 – Fabricated Metal Roofing Accessory (flashing/counter Flashing) (77.94 L.m.), Item No. 1003(11)a1 – Fascia Board, 12mm Fiber Cement Board (77.94 M), Item No. 1013(2)b1 – Fabricated Metal Roofing Accessory (gutter) (44.40 L.m.), Item No. 1013(2)a1 – Fabricated Metal Roofing Accessory (ridge/hip Roll), (22.20 L.m.), Item No. 1032(1)c1 – Painting Works (metal Painting) (83.36 Sq.m.), Item No. 1001(1)a3 – Pipes And Fittings (pvc) (100mm) (40.00 M), Item No. 903(1) – Formworks And Falseworks (1.00 L.s.), Item No. Spl-1 – Backboard Support (1.00 Lot), Completion Of The Works Is Required Within 120 Calendar Days. Bidders Should Have Completed Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From The Provincial Government Of Eastern Samar And Inspect The Bidding Documents At The Address Given Below From 8:00 Am – 5:00pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Five Thousand Pesos Only (php5,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later That The Submission Of Their Bids. 6. The Provincial Government Of Eastern Samar Will Hold A Pre-bid Conference On January 21, 2025, 10:00 A.m., At The Bids And Awards Committee Office, Capitol Building, Borongan City, Which Shall Be Open Only To All Interested Parties Who Have Purchased The Bidding Documents. 7. Bids Must Be Delivered To The Address Below On Or Before February 03, 2025, 10:00 A.m., At The Bids And Awards Committee Office, Capitol Building, Borongan City. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. The Procurement Process Will Be Conducted In Accordance With The Schedules Provided In Ra 9184 And Its Rirr For Advertisements, Receipt Of Letters Of Intent, And Issuance Of Bid Documents. 9. The Provincial Government Of Eastern Samar Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Nelson F. Cortez Chairman, Bids And Awards Committee Bids And Awards Committee Office Capitol Building, Borongan City Mobile No.09177583330 E-mail Address: Easternsamar.gov.ph Esamar.bac@gmail.com Nelson F. Cortez Bac Chairman

Details: Description Republic Of The Philippines Provincial Government Of Eastern Samar Capitol Building, Borongan, Eastern Samar, 6800 Tel No. (055)-560-8312 E-mail Address: Esamar.bac@gmail.com Bids And Awards Committee (bac) Invitation To Bid For Construction Of Multi-purpose Building (covered Court) Phase-2, Brgy. Sta. Cruz, Salcedo, Eastern Samar 1. The Provincial Government Of Eastern Samar, Through The 20% Edf 2025 Intends To Apply The Sum Of Three Million Six Hundred Thousand Pesos Only (php3,600,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract Itb No. 2025-01-053 Construction Of Multi-purpose Building (covered Court) Phase-2, Brgy. Sta. Cruz, Salcedo, Eastern Samar. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Eastern Samar Now Invites Bids, Item No. B.5 – Project Billboard/sign Board (1.00 Each), Item No. B.7(1)- Occupational Safety And Health Program (3.33 Month), Item No. B.9 – Mobilization/demobilization (1.00 L.s.), Item No. 1047(2)a – Structural Steel Roof Truss (9,453.79 Kg), Item No. 1047(2)b – Structural Purlins (3,769.88 Kg), Item No. 1047(6) – Metal Structures Accessories (steel Plate) (712.72 Kg), Item No. 1047(3)b – Metal Structure Accessories (sag Rods) (288.00 Each), Item No. 1047(3)a – Metal Structure Accessories (anchor Bolts) (36.00 Each), Item No. 1047(3)d – Metal Structure Accessories (cross Bracing) (24.00 Each), Item No. 1047(3)c – Metal Structure Accessories (turn Buckle) (24.00 Each), Item No. 1014(1)b1 – Prepainted Metal Sheets, Long Span (534.21 Sq.m,), Item No. 1013(2)a1 – Fabricated Metal Roofing Accessory (ridge/hip Roll) (31.00 L.m.), Item No. 1013(2)a2 – Fabricated Metal Roofing Accessory (flashing/counter Flashing) (96.47 L.m.), Item No. 1013(2)b1 – Fabricated Metal Roofing Accessory (gutter) (62.00 L.m.), Item No. 1003(11)a1 – Fascia Board, 12mm Fiber Cement Board (96.47 M), Item No. 1032(1)c – Painting Works (metal Painting) 844.48 Sq.m.), Item No. 1001(1)a – 50mm ₡-100mm ₡ Pvc Pipe, Series 6001 Series 1000 (48.00 M), Item No. Spl-1 – Backboard Support (1.00 Lot), Item No. Spl-2 – Scaffolding (1.00 L.s.), Completion Of The Works Is Required Within 100 Calendar Days. Bidders Should Have Completed Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From The Provincial Government Of Eastern Samar And Inspect The Bidding Documents At The Address Given Below From 8:00 Am – 5:00pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Five Thousand Pesos Only (php5,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later That The Submission Of Their Bids. 6. The Provincial Government Of Eastern Samar Will Hold A Pre-bid Conference On January 24, 2025, 10:00 A.m., At The Bids And Awards Committee Office, Capitol Building, Borongan City, Which Shall Be Open Only To All Interested Parties Who Have Purchased The Bidding Documents. 7. Bids Must Be Delivered To The Address Below On Or Before February 07, 2025, 10:00 A.m., At The Bids And Awards Committee Office, Capitol Building, Borongan City. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. The Procurement Process Will Be Conducted In Accordance With The Schedules Provided In Ra 9184 And Its Rirr For Advertisements, Receipt Of Letters Of Intent, And Issuance Of Bid Documents. 9. The Provincial Government Of Eastern Samar Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Nelson F. Cortez Chairman, Bids And Awards Committee Bids And Awards Committee Office Capitol Building, Borongan City Mobile No.09177583330 E-mail Address: Easternsamar.gov.ph Esamar.bac@gmail.com Nelson F. Cortez Bac Chairman

Details: This Solicitation, W912ch-24-q-0084, Proposed To Award A Firm Fixed Priced (ffp) Contract To G.t. Machining & Fabricating Ltd (cage Code: 3ar59), For Procurement Of The Following Item: noun: Winch,drum,power Op nsn: 3950-20-010-1538 manufacturer’s Part Number/cage Code: A4809173/3ar59 quantity: 10* *100% Option Available there Is No Technical Data Package (tdp) Associated With This Procurement. Only The Manufacturer’s Part Number Is Approved From The Manufacturer Or An Approved Distributor. interested Offerors Shall Submit A Proposal Via Email No Later Than February 10, 2025, 5:00 Pm Est To The Contract Specialist (diana.jones47.civ@army.mil) And Cc The Contracting Officer (katherine.e.macfarland.civ@army.mil) With The Subject Header: Proposal Submission -w912ch-24-q-0084 (company Name). Once A Proposal Is Received The Contract Specialist/contracting Officer Will Reply With The Respective Offeror Stating Receipt Of Proposal Submission. caution: This Solicitation Will Be Issued Electronically As Will Any Amendments Thereto. Because Of This, The Government Is Under No Obligation And Is, In Fact, Unable To Maintain A Mailing List. The Burden Is Therefore On Any Interested Parties To Periodically Access The Above Internet Address In Order To Obtain Any Amendments Which May Be Issued. Failure To Obtain Any Amendments And To Respond To Them Prior To The Date And Time Set For Receipt Of Proposals May Render Your Proposal Nonresponsive And Result In The Rejection Of The Proposal. notice To All Contractors: All Contractors Who Provide Goods/services To The Department Of Defense (dod) Must Be Registered In The System For Award Management (sam). You May Register Via The Internet At Https://www.sam.gov/sam/pages/public/loginfaq.jsf. Further Information May Be Obtained Through The Internet At: Https://www.sam.gov/sam/pages/public/loginfaq.jsf.

Details: Description 95 Cu.m Earthfill 165 Bags Portland Cement 28 Cu.m Good Mixed Sand And Gravel 30 Length 10mmøx6.0m Drb Std 10 Length 8mmø X6.0m Drb Std 2 Kgs No.16 G.i. Tie Wire 500 Pcs No.4 Chb 10 Length 3"ø X 6.0m G.i. Pipe Sch.40 36 Length 1.2mm X 2" X 4" X 6m Cee Purlins 10 Kgs Welding Electrode 6013 20 Length 3.0mm X 25mm X 25mm X 6m Angle Bar 10 Length 1.2mm X 2" X 6" X 6m Cee Purlins 235 Ln.m 0.40mm Thk X 1.1m Nominal Width Pre-painted Long Span Roof 3 Pcs Tecksrew Adaptor 100 Pcs Teckscrew 2 Quarts Sealant 7 Gal Metal Primer 7 Gal Silver Aluminum Paint 4 Pcs Paint Brush #2 2 Pcs Paint Brush#4 7 Gal Paint Thinner 3 Pcs Steel Brush 2 Pcs Switch (surface Type) 2 Roll #12 Flat Cord Wire 4 Pcs 2 1/4" Ceramic Receptacle 4 Pcs 12w Led Bulb 4 Set Pre-fabricated Steel Scafold 5 Kgs Welding Electrode 6013 20 Length 3.0mm X 25mm X 25mm X 6m Angle Bar 10 Pcs Steel Matting

Details: Description Part Ii Other General Requirements B.5 Project Billboard/signboard B.7(2) Occupational Safety & Health Program B.9 Mobilization/demobilization Part Iii Civil,mechanical, Electrical And Sanitary/plumbing Works Part A Earthworks 803(1)a Structure Excavation (common Soil) 804(1)a Embankment (from The Structure Excavation) 804(1)b Embankment From Borrow 804(4) Gravel Fill Part B Plain And Reinforced Concrete Works 900(1)c1 Structural Concrete (class A, 28 Days) 902(1)a Reinforcing Steel (deformed), Grade 40 902(1)a Reinforcing Steel (deformed), Grade 60 903(2) Formworks And Falsework Part C Finishing C.1 Masonry Works 1046(2)a2 Chb Non-load Bearing Wall (including Reinforcing Steel) 125mm C.2 Finishing Works 1027(1) Cement Plaster Finish C.3 Painting Works 1032(1)c Painting Works (steel) C.4 Roof Framing And Roofing Works 1014(1)b1 Prepainted Metal Sheets (long Span, 0.50mm Thk) 1013(2)a1 Fabricated Metal Roofing Accessory (ridge Roll,0.5mm Thk) 1047(2)a Structural Steel (trusses) 1047(2)b Structural Steel (purlins) C.5 Wooden Doors And Windows 1010(4) Wooden Doors And Windows 1004(2) Finishing Hardware Part D Electrical 1100(10) Conduit, Boxes, And Fittings 1101(33) Wires And Wiring Devices 1102(1) Panel Board With Main & Branch Breakers Part E Mechanical/plumbing And Sanitary Wokrs 1001(11) Septic Vault (concrete/chb) 1001(8) Sewer Line Works 1002(24) Cold Water Lines

Details: Description Item No. Description Qty. Unit Part A. Other General Requirements B.5 Project Billboard/signboard – 1.00 L.s B.7(2) Occupational Safety & Health – 1.00 L.s Part B. Earthworks 801(1) Removal Of Structures And Obstruction – 1.00 L.s 803(1)a Structure Excavation (common Soil) – 72.00 Cu.m 804(1)a Embankment From Structure Excavation – 10.80 Cu.m 804(1)b Embankment From Borrow – 39.60.cum 804(4) Gravel Fill – 4.50 Cu.m Part C. Plain And Reinforced Concrete Works 900(1)c1 Structural Concrete, Class A, 28 Days – 98.54 Cu.m 902(1)a Reinforcing Steel (deformed), Grade 40 – 8,862.92 Kg. 903(2) Formworks And Falseworks – 321.60 Sq.m Part D.roofing Works 1013(2)a2 Fabricated Metal Roofing Accessory, Gauge 26, Flashing – 48.00 M 1013(1)b1 Corrugated Metal Roofing – 592.80 Sq.m Part E. Painting 1032(1)c Painting Works, Steel – 228.48 Sq.m Part F. Metal Structures 1047(8) Structural Steel, Roof Framing – 1.00 L.s 1047(2)b Structural Steel Purlins – 2,494.00 Kg. 1047(4) Metal Structure Accessories, Cross Bracing – 530.96 Kg. 1047(7)a Metal Structure Accessories, Bolts – 88.92 Kg. 1047(7)b Metal Structure Accessories, (sagrods) – 160.20 Kg. 1047(3)c Metal Structure Accessories, Turnbuckle – 56.00 Part G. Electrical 1100(10) Conduits, Boxes And Fittings – 1.00 L.s

Description: CATEGORY: HDPE laminated Sand Bag of size 75x40 cm Sand colour and each bag having weight not less than 60 gms , SHS 6 mm thick size 120x120mm x 2.4m long for column with holes as per tech spec , ISMB 150 RSJ 150 x 75 mm 1.85 mtr long for beam conforming to relevant IS as per tech spec att , ISMB 150 RSJ 150 x 75 mm 60 Cm mtr long for beam conforming to relevant IS as per tech spec att , ISMB 125 RSJ 125 x 70mm 3.0m long for beam conforming to relevant IS as per tech spec att , SHS 6 mm thick size 70x70mm x 1.85m long for with conforming to IS as per tech spec att , 6mm thick MS plate 75x150mm welded with G1 beam connected with nut and bolts , 6mm thick MS plate 100mm x 100mm with a gap of 75mm as per tech spec att , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column , 6mm thick MS base plate of size 150 x150 mm for SHS column as per tech spec att , Steel Roofing Trough of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick as per tech spec att , MS hexagonal nuts Bolts and washers 12 mm dia 40 mm long. , LDPE sheet 3 m wide weighing 1.00 Kg per RM black in colour and shall contain as per tech spec att , Red Oxide primer conforming to relevant IS , Synthetic Enamel Paint Colour Green Ist quality conforming to relevant IS as per tech spec att , Thinner as per as per tech spec att . Sample to be approved before supply. , Dry distemper as per tech spec att. Sample to be approved before supply , Chalk whiting as per tech spec attSample to be approved before supply , Paint Brush 4 inch Make Amar or Lucky Sample to be approved before supply , Pre fabricated steel door of size 0.90m x 1.80m made out of 2mm thick MS black carbon sheet as per tech spec att , Supply of Swivel Bullet proof glass glass 750mm x500mm size 72 mm thick as per tech spec att , Silicone Gel sealent of 01 pack of 400 gms including aplicator gun , Ply wood 10 mm thick as per requirement for flat surface , Foundation bolts of 16 mm dia and 250 m long with nut bolts washer etc. , Stone Aggregate to be crushed rock or gravel 20mm graded confirming to relevant IS , Natural sand confirming to relevant IS as per tech spec att , Stone Aggregate to be crushed rock or gravel 40mm graded confirming to relevant IS as per tech spec att , Rapidite quick setting liquid. , Integrated water proofing compound. , Drilling machine portable type, electrically driven , Aluminimum straight edge 50mm squre 2mm thick 1800mm long , wooden Flat Gurmala , Water leveling pipe PVC 100 mtr , Hand Rivet Gun machine , Drill bit 6mm dia , Drill bit 8mm dia , Drill bit 10mm dia , Tape measuring metallic 30 M , Mason trowel Karchi , Tasla Iron 18 inch , Shovel with wooden handle , Axe Picks with wooden handle , Fawda with wooden handle , Crobar 5 feet long , Rammer with wooden handle of WT 5 AND 10 KG , Sieve for sieving fine and crose AGG 900 x 1500mm made of angle iron frame with stand , Brick Hammer 1,2 Kgs , Cutting plier Insulate 6 inch , Screw Driver 12 INCH with insulated plastic , Digital Clamp Meter , Pipe Wrench 12 inch , Pipe Wrench 18 inch , Adjustable spanner 12 inch , Hacksaw frame with 2 Blade , Hand Gloves Canvas with ISI Mark , Aluminium Sprit level 6 inch , Brick Line , Plumbob

Details: Description Invitation To Bid For 25ei0116 - Construction (completion) Of Multi-purpose Building At Barangay Malo, Bansud, Oriental Mindoro, Phase Ii 1. The Dpwh - Southern Mindoro District Engineering Office, Through Nep 2025 Intends To Apply The Sum Of Php 2,970,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction (completion) Of Multi-purpose Building At Barangay Malo, Bansud, Oriental Mindoro, Phase Ii/25ei0116. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh - Southern Mindoro District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction (completion) Of Multi-purpose Building At Barangay Malo, Bansud, Oriental Mindoro, Phase Ii Contract Id No. : 25ei0116 Locations : Bansud, Oriental Mindoro, Phase Ii Scope Of Works : Completion Of Covered Court, Featuring A 2-tier Bleacher System At The Rear Elevation With A Total Lenght Of 30.00 Meters, And The Addition Of A Bay Extending 5.10 Meters. Scope Of Work Includes Comprehensive Earthworks, Civil Works, Masonry Works, Surface Preparation And Painting Of Newly Installed And Existing Beams, Columns, And Bleachers, Steel Painting Of Rafters And Purlins For The Bleacher Structure, As Well As Complete Roofing Installation, Fabrication And Installation Of Backboard/ring/frame. Approved Budget For The Contract : Php 2,970,000.00 Contract Duration : 120 Calendar Days 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D, B, A, Aa, Aaa For General Engineering. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Dpwh - Southern Mindoro District Engineering Office And Inspect The Bidding Documents At Dangay, Roxas, Oriental Mindoro During Weekdays From 8:00 A.m. – 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 27, 2024 - January 16, 2025 Until 10:00 A.m. From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 3,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh - Southern Mindoro District Engineering Office Will Hold A Pre-bid Conference On January 3, 2025 At 10:00 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_southernmindoro@dpwh.gov.ph For Electronic Submission On Or Before January 16, 2025 Until 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On January 16, 2025 @ 10:30 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh - Southern Mindoro District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Engr. Aleli Olly U. Manalaysay Head, Procurement Unit, E-iii Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Emmanuel A. Manalaysay Bac Chairperson Assistant District Engineer Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Approved: Emmanuel A. Manalaysay Bac Chairperson

Details: ***update 16 December 2024: The Draft Rfp Document (located In The Attachments Section), Encompassing Sections L And M Of The Draft Rfp, Has Been Added To This Posting. Please See The Updated Information And Instructions In The Revised Sections Below.*** ***update 27 November 2024: Pws Attachment Was Revised By Removing Cui Header. This Document Contains No Cui.*** introduction: army Contracting Command – Aberdeen Proving Ground (acc-apg) Is Releasing This Draft Request For Proposal (rfp). This Is Not To Be Construed As A Commitment By The Us Government To Form A Binding Contract Or Agreement. The Government Will Not Reimburse Or Pay For Information Submitted In Response To This Draft Rfp. All Submissions Become Government Property And Will Not Be Returned. This Draft Rfp Is Open To All Business Types. this Draft Rfp Is Issued For The Purpose Of Developing A Viable Solicitation That Will Best Communicate The Government's Requirements To Industry Through This Exchange Of Information. Responses To This Draft Rfp Are Voluntary And Will Not Affect Any Contractor's Ability To Submit A Proposal If, Or When, A Solicitation Is Released. This Draft Rfp Is For Planning Purposes Only And Does Not Constitute A Commitment, Implied Or Otherwise, That A Procurement Action Will Be Issued. no Entitlement To Payment By The Government Of Direct Costs Or Charges Will Arise Because Of The Submission Of Information In Response To This Draft Rfp. Proprietary Information Shall Not Be Submitted In Response To This Draft Rfp, Nor Will The Government Be Liable For Or Suffer Any Consequential Damages For Any Improperly Identified Proprietary Information. No Award Will Be Made As A Result Of This Draft Rfp. This Draft Rfp Is For Informational Purposes Only To Promote Exchanges Of Information With Industry. The Government Will Not Pay For Any Information And/or Materials Received In Response To This Draft Rfp And Is Not Obligated By The Information Received. background: the Primary Mission Of Program Executive Office Intelligence Electronic Warfare And Sensors (peo Iew&s) Is To Provide Affordable, World Class Intelligence, Sensor, And Electronic Warfare Capabilities Enabling Rapid Situational Understanding And Decisive Action. Peo Iew&s Currently Leads The Charge For The Army’s Artificial Intelligence (ai)/machine Learning (ml) Efforts, With Project Linchpin (pl) Being The Army’s Program Of Record (por) For Artificial Intelligence Operations And Services (aiops+). Aiops+ Includes The Industry Recognized Practices Of Ai/machine Learning Operations (ai/mlops) And Pl Ai Ecosystem, Pl Standardized Approaches (e.g. Ai Risk Framework), Pl Design Principles, And The Secure Trusted Environments And Services Which Enable The Delivery Of Ai Solutions To Ai-enabled Programs. Additionally, Software (sw) Development Is The Cornerstone Of The Programs That Allow The Army To Develop The Capabilities Which Enable Spectrum And Cyberspace Superiority. Sw Is Key To Each Piece Of The Army’s Networked Intelligence, Electronic And Cyber Warfare Capabilities. Peo Iew&s Leverages Modern Sw Development Practices As It Supports Future Army Efforts Such As Electronic Warfare (ew) Re-programming As It Paces The Threat. scope: the Peo Iew&s’ Matoc, Entited Artificial Intelligence And Software At Pace (ais@p),will Support Rapid Awards Of Ai/ml And Sw Development Requirements To Support Pl And Other Entities In Response To A Constantly Evolving Threat Environment, Swift On/off Ramping Of Vendors, And The Ability To Quickly Transition Between Vendors In The Event Of Contractor Performance Concerns. This Contract Will Provide The Warfighter The Best Capabilities At The Best Value – In The Quickest And Most Efficient Manner Possible. the Peo Iew&s Ais@p Contract Vehicle Includes Two Vendor Pools Supporting Peo Iew&s Focusing On The Areas Ai/ml And Sw Development. The Ai/ml Pool Will Focus On Supporting The Project Linchpin Efforts. The Sw Development Pool Shall Include Design, Development, Fabrication, And Testing Of Developmental Systems Covering The Complete Range Of The Peo Iew&s Portfolio. Example Efforts May Include Signal Detection And Analysis, Ems Effects, And Signal Exploitation. draft Request For Proposal (rfp) Information: in Pursuit Of A Collaborative And Transparent Procurement Process, Acc-apg And Peo Iew&s Are Releasing This Draft Rfp To Industry For Review And Comment. This Proactive Approach Will Enable The Incorporation Of Valuable Industry Insights And Feedback, Ultimately Leading To A More Effective And Efficient Solicitation. the Draft Performance Work Statement (pws), And The Draft Rfp Document Are Located In The Attachments Section Below. The Draft Rfp Document Includes The Salient Details Of The Draft Rfp, Including Instructions To Offerors, Evaluation Criteria, Evaluation Phases, Basis For Award, And Small Business Set-aside Information. acc-apg And Peo Iew&s Are Proactively Releasing This Information For Industry Review And Comment In Advance Of The Scheduled Industry Day On January 7th, 2025, To Facilitate Informed Dialogue And Maximize The Value Of The Event. please Note That Any Documents Attached To This Draft Rfp Aredraftsand Are Subject To Change Before The Final Rfp Release. how To Respond To This Draft Rfp: acc-apg And Peo Iew&s Are Requesting That Interested Vendors: review The Pws And Draft Rfp Document Located In The Attachments Section Below. complete The Microsoft Forms Survey Requesting Basic Information From Prospective Vendors. the Link Is Located In The Links Section Below, As Well As Here:https://forms.osi.apps.mil/r/pmwdh4ugee . gather Constructive Comments, Questions, And Feedback Regarding The Pws And Draft Rfp Document, And Send Them By Email To The Peo Iew&s - Ais@p Mailbox. mailbox Address Is Listed In The Contact Information Section Below, As Well As Here:usarmy.apg.peo-iews.mbx.aisap@army.mil . subject Line Of The Email Must Read "draft Rfp Ais@p - [company Name]". acc-apg And Peo Iew&s Ask That Vendors Not Delay Their Feedback, To Allow The Government Time To Revise And Address Responses Prior To Industry Day.

Details: Description Invitation To Bid For The Contract Package For The Improvement Of Local Economic Enterprise (phase Iv), Barangay Del Pilar, Tagudin, Ilocos Sur 1. The Local Government Unit Of Tagudin, Ilocos Sur, Thru Its Bids And Awards Committee Intends To Apply The Sum Of Three Million Four Hundred Fifty Four Thousand Six Hundred Fifty Four Pesos & 82/100 (php3,454,654.82) Being The Approved Budget For The Contract (abc) Through The Ra 7171, Municpal Share, Special Budget No. 1, Appropriation Ordinance No. 3, Series Of 2024 To Payments Under The Contract For The Contract Package For The Improvement Of Local Economic Enterprise (phase Iv), Barangay Del Pilar, Tagudin, Ilocos Sur, Contract No. Infr-2024-30. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Unit Of Tagudin, Ilocos Sur Now Invites Bids For The: Item No. Description Qty Unit Contract Duration B.9 Mobilization & Demobilization L.s. L.s. 91 C.d. A. Local Economic Enterprises Office 101 (3) Removal Of Existing Structure 43.50 Sq.m. Spl I.a Masonry Works 5.78 Sq.m. Spl Ii.a Plastering Works 12.00 Sq.m. Spl Iii.a Aluminum Framed Doors, Windows, Glass Partition And Aluminum Cabinet L.s. L.s. Spl Iv.a Ceiling Works 96.00 Sq.m. Spl V.a Painting Works 143.00 Sq.m. Spl Vi.a Electrical Works L.s. L.s. Spl Vii.a Fabrication Of Bench L.s. L.s. B. Coconut Stalls 103 Excavation For Structure 25.29 Cu.m. 404 Reinforcing Steel Bars 5,451.80 Kgs 405 Structural Concrete 44.324 Cu.m. Spl I.b Masonry Works 146.34 Sq.m. Spl Ii.b Plastering Works 318.30 Sq.m. Spl Iii.b Tile Works 156.84 Sq.m. Spl Iv.b Roof & Roof Framing 189.00 Sq.m. Spl V.b Ceiling Works 184.22 Sq.m. Spl Vi.b Painting Works 318.30 Sq.m. Spl Vii. Occupational Safety And Health Program L.s. L.s. Spl Viii. Project Billboard L.s. L.s. ***nothing Follows*** Bidders Should Have Completed, For The Past Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In General Conditions Of Contract. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act.” Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperatives, And Partnerships Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders Shall Obtain Further Information From The Bac Secretariat Of The Local Government Unit Of Tagudin, Ilocos Sur And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. To 5:00 P.m. Monday - Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 24, 2024-january 16, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php5,000.00. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Local Government Unit Of Tagudin, Ilocos Sur Will Hold A Pre-bid Conference On January 3, 2025 @ 1:00 P.m. At The 3rd Floor, Pimentel Room, Tagudin Town Hall, Rizal, Tagudin, Ilocos Sur Which Shall Be Open To All Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before January 16, 2025 @ 1:00 P.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On January 16, 2025 @ 1:00 P.m. At The 3rd Floor, Pimentel Room, Tagudin Town Hall, Rizal, Tagudin, Ilocos Sur. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. The Local Government Unit Of Tagudin, Ilocos Sur Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 9. For Further Information, Please Refer To: Loriefel T. Leal Head, Bac Secretariat Local Government Unit, Rizal, Tagudin, Ilocos Sur Tel. No. (077) 652 1740, Fax No. (077) 652 1167 Email Add: Lgutagudinbac_asap@yahoo.com (sgd)marina I. Balicoco Bac Chairman Posted At Philgeps, Lgu Website And At 3 Conspicuous Places (municipal Hall, Mun. Auditorium And Yellow Market) Dated Published: December 24-30, 2024