Fabrication Tenders

Description: Construction, Testing And Commissioning Of Steel Fabricated Structure 03 Nos. Of 10 Kl Capacity Staging 9 Mtr. Including Construction Of Suitable R.c.c. Valve Chamber In Village And Providing, Laying, Jointing, Interconnection, Testing And Commissioning Of 63 Mm Dia Hdpe Class 10 Kg/sqcm Of 440 M & 75 Mm& 63 Mm Dia Hdpe Class 6kg/sqcm Of Respectively 128 Mtr.& 3357 Mtr. Valve Specials And All Fittings Including All Allied Civil Works, Supplying & Installation Of Energy Efficiant Five Star Bee Rating Isi Marked Required Capacity Three/single Phase, 50 Hz, 415v, Deep Well Submersible Pump Stainless Steel Body, Suitable For 4"/6" Tube Well With Control Panel Starter Suitable For Submersible Pump With Dry Run Protection, Connections, Including Clamps, Bore Cap Etc 04 Nos. As Required As Per Specifications But Excluding Pipe, Ss/nylonwire Rope And Connection Cable Including Verification Of Tube Well Yield. & Electric Connection From Cseb, Construction Of Brick Masonry Switch Room Of Size 1.50*1.50*3.00 Mtr (4 Nos), Providing 105 No Functional Household Tap Connection (f.h.t.c.-105 Nos.) (pe-al-pe Pipe 1432 Mtr) In Individual Households And Government Instiution Etc. Complete With Trial Run Operation & Maintanance For 06 Months Under Single Village Piped Water Supply Scheme Under Jal Jeevan Mission For Village Kunjara,dhanyaamba ,basantala In Block Kunkuri District – Jashpur.

Details: Description 7 Pcs Rib Type Long Span 12" (0.5mm X 1.12 X L.s) 32 Pcs Rib Type Long Pspan 14" (0.5mm X 1.12 X L.s) 12 Pcs Fabricated Pre-painted Ridge Roll 21 Pcs Fabricated Pre-painted Gutter 10 Pcs Fabricated Pre-painted Flashing 12 Pcs Pvc Pipe 3"ø 20 Pcs Pvc Elbow 3"ø 1000 Pcs Tekscrew 400 Pcs Blind Rivet 50 Pcs Cutting Disk 4" 10 Pcs Grinding Disk 45 Pcs [-purlins 2" X 3" X 1.50 Mm 10 Pcs [-purlins 2" X 6" 58 Pcs Angle Bar 2" X 2" X ¼" 10 Kgs Welding Rod 181 Pcs Wall Angle 70 Pcs Double Furring 60 Pcs Carrying Channel 130 Pcs W-clip 30 Pcs Hanger 47 Pcs 3.5mm Thick Ficem Board 700 Pcs Tokscrew 10 Kgs Assorted Cwn 600 Pcs Black Screw 10 Pcs Tape 5 Gals Masonry Putty 5 Pcs Putty Knife 4 Tins Quick Drying Enamel 4 Tins Flat Wall Enamel 4 Pcs Paint Brush 4" 4 Pcs Paint Brush 2" 3 Pcs Baby Roller #9

Details: Introduction: Pmg Technologies Is Operating The Transport Canada Motor Vehicle Test Centre (mvtc) Located In Blainville, Quebec. Pmg Technologies Is Planning The Following Sole Source Purchase. Required Equipment: Data Acquisition Systems And Necessary Accessories To Fabricate Up To 2 Kits To Conduct Cmvss 122 (dynamic Motorcycle Testing On Tracks). These Systems Shall Include The Following Items:

Details: Description Republic Of The Philippines Province Of Southern Leyte Municipality Of Bontoc Invitation To Bid For Fabrication And Installation Of Hanging Basketball Goal For Barangay Himakilo, Bontoc Southern Leyte. 1. Barangay Himakilo, Through The 10% Sk Fund, Intends To Apply The Sum Of One Hundred Eight Thousand Four Hundred Seventy Pesos (php 108,470.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Fabrication And Installation Of Hanging Basketball Goal For Barangay Himakilo, Bontoc Southern Leyte. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipality Of Bontoc Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Thirty (30) Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Interested Bidders May Obtain Further Information From The Municipality Of Bontoc And Inspect The Bidding Documents At The Address Given Below From During 8:00 Am To 5:00 Pm Monday To Friday Except Holidays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 7, 2024 -january 07, 2025 From Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (p500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means Not Later Than The Submission Of Their Bids. 6. The Municipality Of Bontoc Will Hold A Pre-bid Conference On December 26, 2024, Thursday 10:00 Am At Barangay Himakilo, Bontoc Southern Leyte Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before January 07, 2025, Tuesday 10:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In The Instructions To Bidders Clause 14. 9. Bid Opening Shall Be On January 07, 2025, Tuesday 10: 15 Am At Barangay Himakilo, Bontoc Southern Leyte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Barangay Himakilo Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Mecca D. Manatad Sk Chairwoman Office Of The Bids And Awards Committee _(contact No.) Himakilo@yahoo.com(email Add) 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph December 17, 2024 Hellejoy N. Oppus Bac Chairman

Details: Description Republic Of The Philippines Province Of Southern Leyte Municipality Of Bontoc Invitation To Bid For Fabrication And Installation Of Hanging Basketball Goal For Barangay Baugo, Bontoc Southern Leyte. 1. Barangay Baugo, Through The 10% Sk Fund, Intends To Apply The Sum Of One Hundred Eight Thousand Four Hundred Seventy Pesos (php 108,470.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Fabrication And Installation Of Hanging Basketball Goal For Barangay Baugo, Bontoc Southern Leyte. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipality Of Bontoc Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Thirty (30) Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Interested Bidders May Obtain Further Information From The Municipality Of Bontoc And Inspect The Bidding Documents At The Address Given Below From During 8:00 Am To 5:00 Pm Monday To Friday Except Holidays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 7, 2024 -january 07, 2025 From Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (p500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means Not Later Than The Submission Of Their Bids. 6. The Municipality Of Bontoc Will Hold A Pre-bid Conference On December 26, 2024, Thursday 10:00 Am At Barangay Baugo, Bontoc Southern Leyte Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before January 07, 2025, Tuesday 10:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In The Instructions To Bidders Clause 14. 9. Bid Opening Shall Be On January 07, 2025, Tuesday 10: 15 Am At Barangay Baugo, Bontoc Southern Leyte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Barangay Baugo Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Juliet Y. Ajoc Sk Chairwoman Office Of The Bids And Awards Committee _(contact No.) Baugo@yahoo.com(email Add) 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph December 17, 2024 Rex Siona Bac Chairman

Details: Title: Conception, Réalisation Et Installation De La Scénographie De L'exposition Carnavals D'ici Et D'ailleurs Programmée À L'hde Var À Draguignan description: Les Missions Concernent Les Prestations Suivantes : - Conception De La Scénographie - Réalisation-fabrication Et Montage De La Scénographie, Coordination Et Suivi De Réalisation Et De L'installation In Situ, Éclairages - Suivi De L'exploitation Et Maintenance Pendant La Période D'exposition - Démontage Des Mobiliers Et Dépose Des Graphismes De La Scénographie, Le Transport Et L'évacuation Ainsi Que La Remise En État Des Espaces En Fin D'exposition. Exposition Programmée Du 13 Décembre 2025 Au 22 Mars 2026 (dates Sous Réserve De Modification) Il N'est Pas Prévu De Décomposition En Lots, L'objet Du Marché Étant Un Projet Global. Marché Pour Partie Sous La Forme D'un Marché Ordinaire (à Prix Global Et Forfaitaire) Et Pour Partie Sur Devis. Marché Passé Pour Une Période Allant De Sa Date De Notification Jusqu'à La Réception De La Remise En État Des Espaces Après L'exposition Prévue Au Plus Tard Le 10 Avril 2026 (date Prévisionnelle). En Cas De Décalage Ou De Prolongation De L'exposition, La Période De Démontage Sera Repoussée D'autant. Il N'y A Pas De Reconduction. Le Financement De La Prestation Est Assuré Par Le Budget Départemental

Details: Description 2hp Window Type Inverter 5 Unit ₱387,500.00 Installation Window Type Inverter Included: Installation Chipping Fabricate Brackets Carrier 2hp Wallmounted Inverter 1 Unit ₱135,688.00 Installation Wallmounted Included: Installation Excess Pipe 20ft Excess Feeder Line 10 Meter Excess Communication Wire 8meter Breaker Water Pump

Details: Description Item Of Works: Part I Facilities For The Engineer Part Ii Other General Requirements Part Iii Civil, Mechanical, Electrical And Sanitary/plumbing Part A Earthworks Part B Plain And Reinforced Concrete Works Part C Finishing Part D Fabricated Materials, Installation, And Hardware Part E Roof And Framing Works Part F Painting Works Part G Plumbing Works Part H Electrical Works

Details: Description 4.53 Months Occupation Safety And Health Program Earthworks 15.18 Sq.m. Removal Of Existing Concrete Pavement 111.74 Cu.m. Structure Excavation (common Soil) 111.74 Sq.m. Structure Excavation (common Soil) 38.19 Cu.m. Embankment From Borrow 36.47 Cu.m. Gravel Fill Plain & Reinforced Concrete Works 132.92 Cu.m. Reinforced Concrete 2,079.79 Kgs Reinforcing Steel, Grade 40 1,282.95 Kgs Reinforcing Steel, Grade 60 341.6 Sq.m. Formworks And Falseworks Finishing And Other Civil Works 1 L.s. Storm Drainage And Downspout 16.4 M Fabricated Metal Roofing Accessory (ridge/hip Roll) 28.46 M Fabricated Metal Roofing Accessory -flashing 61.71 M Fabricated Metal Roofing Accessory -gutter 553.93 Sq.m. Prepainted Metal Sheets, 0.50m Rib Type 657.9 Sq.m. Painting Works (steel) 11,373.95 Kgs Structural Steel, Trusses 4,813.20 Kgs Structural Steel, Purlins 1.78 Pcs Metal Structure Accessories, Bolts 32 Pcs Metal Structure Accessories, Turnbuckle 385.83 Kgs Metal Structure Accessories, Cross Bracing 241.15 Kgs Metal Structure Accessories, Steel Base Plates 246.08 Kgs Metal Structure Accessories, Sagrods Xxxnothing Followsxxx

Details: Sources Sought/request For Information Melting, Rolling And Milling Of Lead this Sources Sought Synopsis Is Not A Pre-solicitation Notice, Request For Proposal (rfp), Or An Invitation For Bid, But A Market Survey To Identify Potential Participants. This Notice Is Not To Be Construed As A Commitment By The Government To Award A Contract. The Government Will Not Reimburse Contractors For Any Costs Incurred Because Of Their Participation In This Survey. The Proposed North American Industry Classification System (naics) Code For This Acquisition Is 562920 – Materials Recovery Facilities, With A Small Business Standard Size Of $25m. The Purpose Of This Sources Sought Announcement Is To Assist The Department Of Energy In Conducting Market Research To Identify Sources Of Services That Meet Their Requirements, And In Accordance With Far Part 10, To Make Appropriate Acquisition Decisions And To Gain Knowledge Of Potential Qualified Business Participants Capable Of Providing All Services Described In This Synopsis. background the Department Of Energy (doe) Conducts A Variety Of Research And Operational Activities That Utilizes Lead As Radiation Shielding, Including Within The Office Of Science (sc) Which Funds Basic Research To Advance The Scientific Knowledge Needed To Provide New And Improved Energy Technologies; To Understand The Health And Environmental Implications Of Energy Production And Use; And To Maintain U.s. Leadership In Discovering The Fundamental Nature Of Energy And Matter. the Sc Organization Is Led By A Presidentially Nominated, Senate-confirmed Director And Two Senior Career Federal Deputy Directors: Science Programs, And Operations. The Organization And Functions Are Further Discussed At The Following Website: Http://science.energy.gov/about/organization. sc Comprises A Geographically Diverse Organization. Sc Has Two Locations In The Washington, d.c. Area (headquarters): One Location At Doe’s Forrestal Building In Washington, D.c. And One Location In Germantown, Maryland. Most Of The Sc Programs Staff Resides At These Two Locations. Field Operations Comprises The Consolidated Service Center (csc) And Ten Site Offices. The Csc Is A Virtual Organization Located In Lemont, Illinois, And Oak Ridge, Tennessee. The Ten Site Offices Are Collocated With Their Respective National Laboratories. sc Currently Has A Project That Requires Fabrication Of Shielding Panels Made Of Lead, Clad In A Stainless-steel Shell. To Accomplish This, Sc Has A Need For Professional Services To Accept About 210 Tons Of Excess Lead From Doe, Then Process And Fabricate The Lead Into Shielding Panels To Be Installed To The Inside Face Of Precast Walls To Improve Radiation Shielding Performance. scope the Doe Would Like To Consider The Fabrication Of New Lead Panels Derived From Excess Lead Accumulated Throughout The Department. The Scope Includes A Stock Of About 210 Tons Of Excess Lead In A Variety Of Configurations, Including Solid Shapes, Lead Shot, And Other Forms. Tasks Would Include Processing And Fabrication Of Excess Doe Lead, Such As Melting Lead Into Ingots, And Fabricating Of Lead Into Stainless Steel Cladding To Meet Specifications Provided By Doe. the Project Requires About 70 Lead Panels Between Two Inches And Four Inches In Thickness. The height Varies From Two Feet To Seven Feet, And The Width Varies From Two Feet To Ten Feet. One Side Of The Panel Shall Be Steel Encased. The Opposite Side Shall Be Painted, And Small Cutouts Are Required On This Side. The Panels Also Need Anchor Holes And Lifting Inserts. additionally, Doe Would Like To Understand Costs And Processes For Manufacturing Other Miscellaneous Items From Cast, Rolled Or Otherwise Formed Lead. Doe Would Also Like To Understand The Costs And Process Structure For Working With New Lead Versus Recycling Lead To Meet The Same Deliverable. the Structural Design And Anchorage Detailing For The New Lead Shielding Panels In This Project Is Based On The Current Asce -16, California Building Code (cbc), 2019 Edition, Part 10 (california Existing Building Code, University Of California Seismic Safety Policy, Geotechnical Data And Interpretation Report And Site-specific Seismic Hazard Analyses And Development Of Design Ground Motions Report). The Seismic Analysis And Retrofit Design Of The Existing Structure Have Been Performed In A Previous Task. The Design Considers The Combination Of Gravity And Seismic Loading Resisted By The Anchorage To The Precast Walls. Note: Although This Project Is Located In The State Of California, Future Projects May Be Located In Other States And Be Subject To That State’s Standards. request For Information (rfi) the Government Requests Responses From All Interested Businesses Who May Be Able To Meet All Or Part Of The Technical Requirements, Including Those Certified As A Small Business In The Suggested Naics Code Of 562920. submission Requirements: 1. Page Limit - Ten (10) 2. Page Size - 8 ½” X 11”; 12 Pt. Times New Roman Font 3. Do Not Include Promotional Materials 4. To Be Received No Later Than 30 Calendar Days After Posting. 5. Submissions Must Be E-mailed To Trevor.weeks@science.doe.gov & Dustin.epperson@science.doe.gov With A Subject Line Of “lead Melting, Rolling, And Milling Rfi ”. interested Sources That Have The Capability To Provide This Support Are Requested To Submit The Following: a Technical Capability Statement To Provide The Services Described To Include Company Name, Address, Point Of Contact, E-mail Address, Telephone, Uei, Tin, Cage Code, And Any “doing Business As Name” As Applicable. include With Your Technical Capabilities Statement The Answers To The Following Questions: 1. What Is Your Business Type, Size, And Socio-economic Status In Reference To The Projected Naics Code Of 562920? If The Naics Code Is Not Currently In Your Sam.gov Profile, What Do You Anticipate Your Business Size And Socio-economic Status Will Be Once The Naics Code Is Added To Your Sam.gov Profile? Is Naics Code 562920 Appropriate For This Project? 2. Based On Your Knowledge Of This Type Of Requirement, Do You Believe That The Use Of A Firm- Fixed Price Contract Type Is Appropriate? If Not, What Contract Type Is More Appropriate And Why? 3. Based On Your Experience And Knowledge Of This Type Of Requirement And The Size Of The Effort Described In The Scope Section Of This Rfi, Is There An Industry Standard For Costs? 4. What Is Your Experience Processing And Fabricating Lead? 5. Describe Your Experience In Both The Government And The Commercial Market. 6. Provide A Description Of Recent Contract/project Experience As The Prime Contractor For Work Performed Within The Last Five Years For Both The Company And Any Subcontractors, If Applicable, To Include The Following (please Limit To One Page Per Contract/project): • The Size (dollar Value), Duration, Scope, And Complexity Of The Contract/project. • The Type Of Contract (i.e., Fixed Price, Cost Reimbursement, Etc.); And • Identification Of A Contract Or Project Number And Point Of Contact And Contact Information (name, Address, And Phone) At The Agency Or Prime Contractor’s Organization. 7. Provide Documentation, If Any, Demonstrating All Stated Industry Credentials. 8. Do You Currently Have A Government-wide Contract Vehicle That Provides This Service (sewp Idiq, Government-wide Acquisition Contracts (gwac), Multi-agency Contracts, Other Indefinite Delivery Contracts (id/iq), Federal Supply Schedules (fss), Basic Ordering Agreements (boa), Blanket Purchase Agreements (bpa), Etc.? If Yes, Please Provide The Vehicle Type And Contract Number. Are All Services Required In This Synopsis Included In Your Government-wide Contract Vehicle? 9. What Suggestions, If Any, Do You Have For Meeting Doe’s Requirements (including Evaluation Criteria, Contract Line-item Structure, Contract Structure, Or Other Topics)? all Interested Parties Must Be Registered In The System For Award Management (sam) To Be Eligible For An Award Of Government Contracts. ==================================================================== any Proprietary Information Contained In Response To This Request Will Be Properly Protected From Unauthorized Disclosure And Will Not Be Used To Establish The Requirements For Any Future System Acquisition To Not Inadvertently Restrict Competition. Any Evaluation Conducted For Market Research Purposes Shall Not Apply In Any Way To The Evaluation Of The Proposal Submitted To A Solicitation If A Solicitation Is Issued.