Fabrication Tenders

Details: Amendment 01 Is Hereby Issued To Provide Vendors Answers To Questions. Please See Attached. No Other Changes Are Being Made At This Time. the Scope Of Work Is For The Design And Fabrication Of Scintillating Fibers For The Barrel Imaging Calorimeter For The Eic. Bsa Shall Award One Subcontract For A Base Amount Of 1,125,000 Meters And Include Unilateral Option 1 – 1,264,000 Meters And Unilateral Option 2 – 2,511,000 Meters For A Total Of 4,900,000 Meters Of Scintillating Fibers. technical/performance Characteristics a. Light Yield: The Average Response To A Sr-90 Source Shall Be Greater Than 3.5 Photoelectrons Measured Using A Bialkali Photomultiplier Tube (e.g. Hamamatsu R329-02 Or Similar) 200 Cm From The Source, And The Opposite End Blackened (or Assessed Via Other Methods Mutually Acceptable To The Bsa And Contractor). b. Diameter Mean Value And Variation Shall Be 1.00 +/- 0.01 Mm, Rms ≤0.02 Mm. c. Attenuation Length For Blue Light > 4m. d. Batch To Batch Or Lot To Lot Variation Of Light Yield <15%. e. Batch To Batch Or Lot To Lot Variation Of Attenuation Length <10%. f. Emission Spectrum In Blue-green Light g. Scintillation Decay Time <3ns h. Total Length 4900 Km i. Delivery Method In Canes. Length Of Fibers 4.55 Meters +/- 0.01m.

Details: This Notice Of Intent Is Not A Request For Competitive Proposals. This Is Not A Solicitation Or Request For Offers. No Solicitation Package Is Available And Email Requests Will Not Be Honored. Only One Responsible Source And No Other Supplies Or Services Will Satisfy Agency Requirements. the Naval Research Laboratory (nrl) Intends To Award A Sole Source Purchase Order Diaz Sheet Metal Llc, Inc. Of Hyattsville, Maryland To Furnish: fabrication, Installation, And Insulation Of Duct Work. the North American Industry Classification System Code (naics) For This Requirement Is 238220 With The Size Standard Of 19,000,000. The Federal Supply Code (fsc) / Product Service Code (psc) Procurement Is N041 this Purchase Will Be Made Utilizing Simplified Acquisition Procedures In Accordance With: federal Acquisition Regulation (far) Part 13.106-1(b) For Purchases Not Exceeding The Simplified Acquisition Threshold Of $250,000. any Response To This Notice Must Show Clear And Convincing Evidence That Competition Would Be Advantageous To The Government. Information Received Will Be Considered Solely For The Purpose Of Determining Whether Or Not To Conduct A Competitive Procurement. A Determination By The Government Not To Compete This Proposed Purchase Order Based Upon Response To This Notice Is Solely Within The Discretion Of The Government. No Reimbursement For Any Cost Connected With Providing Capability Information Will Be Provided. the Point Of Contact Is: Erik Wells, Email: Erik.wells2.civ@us.navy.mil please Reference This Notice Of Intent Number, N00173-25-q5511 On Your Correspondence And In The “subject” Line Of Your Email.

Details: *** Amendment 0004 Has Been Issued Extending Offers Due Date To 6 January 2025, No Later Than 04:00pm Pt*** ***amendment 0003 Has Been Issued Providing Q&a And Offer Due Date Change To 2 January 2025.*** *solicitation Closing Date Is Changed To 2 January 2025 At 11:00 Pt, Forth Coming Amendment 0003 Will Be Issued To Establishe New Offer Due Date.*** ***solicitation Closing Date Is Changed To To Be Determend, Forth Coming Amendment 0003 Will Be Issued To Establishe New Offers Due Date.*** *** Amendment 0002has Been Issued Providing Q&a And Updated Sow. Attached Please Submit Any Questions You Have To Antonina Beal At Antonina.beal@usace.army.mil No Later Then 5 December 2024, 11:00am Pacific Time.*** ***solicitation Closing Date Is Changed To To Be Determent, Forth Coming Amendment 0002 Will Be Issued To Establishe New Offers Due Date.*** ***amendment 0001 Has Been Issued Providing Q&a And Updated Sow. Attached*** the Ix System Supplier (supplier) Shall Be Responsible For Design, Fabrication, Factory Assembly, And Delivery Of Complete Ix Systems Including All Mechanical Components, Vessels, Inter-vessel Manifold Piping, And Instrumentation Described In The Stamemt Of Work (sow). please Submit Any Questions You Have To Antonina Beal At Antonina.beal@usace.army.mil No Later Then 12 September 2024, 11:00am Pacific Time.

Details: Title: Prestations De Réception, De Stockage, De Préparation De Commandes Et De Distribution De Produits De Santé Soumis À La Chaîne Du Froid Réalisées Par Des Dépositaires Pharmaceutiques description: Le Marché A Pour Objet Des Prestations De Réception, De Stockage, De Préparation De Commandes Et De Distribution 24h/24 Et 7j/7, Réalisées Par Des Dépositaires Pharmaceutiques De Produits De Santé Soumis À La Chaîne Du Froid Nécessaires À Des Plans Sanitaires De Grande Ampleur Ou À Des Événements Exceptionnels En France Métropolitaine Situés Au Sein De 5 Zones Géographiques : Nord-ouest, Nord-est, Ile De France (incluant Les Expéditions Depuis Les Aéroports Parisiens Vers L'outre-mer Et L'international), Sud-ouest Et Sud-est (incluant Les Expéditions Vers La Corse Et Des Préparations Vers L'international). Les Prestations Réalisées Doivent Être Faites Dans Le Respect Des Bonnes Pratiques De Distribution En Gros De Médicaments (bpdg), Version En Vigueur Ainsi Que Dans Le Respect Des Bonnes Pratiques De Fabrication (bpf), Version En Vigueur, Pour Les Opérations De Réétiquetage Pouvant Intervenir Sur Des Conditionnements Secondaires.

Details: Title: Fourniture De Pièces Détachées D'origine Pour Les Engins Et Équipements Divers D'entretien Et D'exploitation De La Route Du Conseil Départemental Du Gard De Marque Hako - 2eme Relance description: Accord-cadre Avec Montant Annuel Maximum Exécuté Par L'émission De Bons De Commande. Le Département Du Gard Possède 1 Balayeuse De Marque Hako. Ce Matériel Est Entretenu Par L'atelier Mécanique Poids Lourds (pl) Du Service Garage Départemental. A Chaque Demande De Pièces Détachées Sera Généré Un Devis Qui Conduira À L'émission D'un Bon De Commande. Définitions : 1/catalogue Des Prix Publics : Document Des Prix De Vente Consultable Publiquement Sur Lequel Le Candidat Se Base Pour Proposer Les Prix De L'offre. On Entend Par « Publiquement » Les Prix Consultables Au Comptoir Du Magasin De Vente, Sur Le Site Internet Du Candidat, Ou Tout Autre Support De Publicité Commerciale Relative Au Candidat. 2/pièces De Rechange D'origine : - Pièces De Rechange D'origine Constructeur : Pièces Distribuées Par Le Constructeur. - Pièces De Rechange D'origine Équipementiers : Pièces Qui Correspondent Aux Spécifications Et Normes De Fabrication Du Constructeur

Details: Description 2025 Infra 038 Description: 1. Site Preparation, Clearing, Cutting Of Trees, Shrubs And Other Plants, Installation Of Warning Devices And Precautionary Measures 2. Desilting, De-clogging And Removal Of Other Obstruction 3. Demolition Of Existing Damaged Riprap And Concrete Obstruction 4. Hauling And Disposal Of Debris And Garbages From The Creek 5. Cofferdamming And Dewatering 6. Excavation 7. Construction Of Concrete Canal 8. Fabrication And Installation Of Concrete Canal Cover At Section 1 9. Construction Safety And Health The Schedule Of Bac As Follows; (bidding) Bac Activities Schedule 1. Receipts From Prospective Bidders Of Letter Of Intent (loi) Including Application For Eligibility – February 12, 2025 To February 19, 2025 – 10:00 Am 2. Issuance Of Eligibility Form & Bid Documents – February 12, 2025 To February 19, 2025 – 10:00 Am 3. Pre-bid Conference On February 19, 2025 – 10:00 Am 4. Receipt Of Eligibility & Bid Requirements Eligibility And Bid Check On March 4, 2025 – 10:00 Am Note: 1. Bring Original Legal Documents. No Original. No Receive. 2. Spa Must Be Specific For The Said Project. No Spa And Not Specific, No Receive. 3. Bring Print Out Itb And Add Drl 4. One Person, One Loi Only 5. Loi Must Be Address To The Bac Chairman Only. (for Your Strict Compliance)

Description: CATEGORY: Wooden Single Bed , Metal Single bed , Wooden Double Bed , Double Mattress , Single Mattress , Single Mattress with Memory Foam , Foam Pillow , Blanket with pillow cover , Bedside Unit , Back Cabinet Unit of size 5500MM X450MM X 3000MM , Back Cabinet Unit of size 4000MM X 450MMX 3000MM , Back Cabinet Unit of size 3500MM X450MM X 3000MM , Wooden Wardrobe of size 1800MM X 900MMX450 MM , Mid Back Revolving chair , 10 seater conference table , 20 seater conference table , 50 seater conference table , Auditorium table , Dressing table , Luggage Rack , Reception Table , Study Table , TV Unit , Wardrobe of size 2100mm H x 1800mm W x 450mm D , Aduitorium chair , High back revolving chair , High back revolving chair natural leather , Cafeteria chair , High back executive chair , Visitor chair Powder coated , Visitor chair Chrome finish , Back Unit , Working Storage , Center Table , Storage Unit of size 4500W X 450D X 1800HT , Working table of size 1500 mml x 600 mm d x 750 mmh , Personal Locker Unit , Coffee Table , Single Seater Sofa , Single seater Recliner , 2 seater sofa , 3 seater sofa , Cafeteria Table , Cubicle workstation with side composite pedestal , Working Cabin table with side composite storage and 1.2 meters height L shaped partition. , Executive Table 3.6 Meter , Executive Table 2.4 Meter , Modular Office Table 1.8 Meter , Single Burner Unit , Support Table , Two Burner Unit , Working Table with sink , Tilting rice Boiler , SS drain , DOSA Chapatti plate , Chapati rolling table , Chapati collecting trolley , Three burner chinese cooking unit , Tandoor Unit SS Gas , Chapati Rolling table , Worktop refidgerator , 4 door vertical Refridgerator , 2 Door Vertical Refridgerator , Chest Freezer , MS Fabricated Rack , Atta maida Bins , SS Soiled Dish , SS 3 sink washing unit , SS Pot rack 4 shelf , Clean dish and glass rack 4 shelf , SS Bain marie with 10 vessel , SS Soiled dish collection Trolley 3 Tier , Water cooler 80 Ltrs , SS paltform trolley , L.P.Gas PIPELINE MANIFOLD SYSTEM , L.P.Gas pipeline , MS Fabricated Cylinder room , HOT AIR VENTILATION SYSTEM , Ductline , External Signage made of SS 304 , Logo Signage , 12mm WPC Letter , Planter 3Ft , Planter 2Ft , Wooden planter 1.5Ft

Description: Please See Updated Requirements. They Ahve Changed. the U.s Embassy Bujumbura, Burundi Has A Requirement To Buy A Prefabricated Laundry Room Featuring The Following Specifications must Be Containerized/meet Iso Standards 3 Commericial Grade Whashers (220 Volt) 3 Commerical Grade Dryers (220 Volt) 1 Laundry Sink 220volt/50 Hzhot Water Heating System (40 Amp) all Required Plumbing (floor Drain/discharge Hose/water Connection Points) two Split-type Hvac Units two Folding Tables two Wire Shelves dryr Vents To The Outsdie tile Floor 220 V Elect Panel commercial Exhause fibercglass Reinforced Panels (walls And Ceilings insulation (walls And Ceiling) lights plugs 1 Single Entrace 2 Windows add The Additional Specifications Here. notes: the Subject Of The Quotation Must Be “quotation Enclosed: Pr15049236:pre-fabricated Laundry Room only Electronic Quotations Are Accepted. Please Ensure You Provide Photos Of What You Are Offering. They Must Be Emailed By The Deadline To Bujprocurement@state.gov value Added Tax (18%) Must Be Included As A Separate Line Item (if Applicable) interested Vendors Should Be Registered In Sam And Should Be Ndaa 899 Compliant On The Submission Date Of The Quote. quotations Must Specify The Delivery Lead-time And Delivery Location. the Following Delivery Addresses Are Permissible: u.s. Embassy Bujumbura 50, Avenue Des Etats-unis kigobe bujumbura, Burundi

Description: 98050114 Scrap Signalling,p Way And Ohe Items, C & W Items- Ms, Gi,ci Containing Signaling Units, Rods, Junction Boxes, Panels, Ms Gi Structures, Ladders, Mast, Rt U, Cb Etc And All Other Types Of Signaling Items, Gear Case, The Ground Connection, Ohe Fitting,ms Chains,heavy Structure Almirah/racks, Rods Angle, Channel, Pipes, Lc Material, Transformers, Ladders, Jali,spring Planck, Pentograph With Or Without Pneumatic Motor, Gate, Door,brake Cylinder, Tie Bar, Fencing, Trolley,ms Machines Etc., Tmt Bars Rods,pulley, Rib Cage,point Machines Without Motors,wagon Body Cut Piece Bogies Side Frame ,machines,st Sleeper, Ms Sheet ,various Types Sleeper Part, Tie Bar, Fencing Bars, I-beam Empty Drums, Light Fittings, Rail Pieces, Ms Wires, Bond, And Other Various Ms Fabricated Structures Of Sorts And Sizes With Or Without Parts Fittings Miscellaneous Items, Etc. And Non-ferrous Attachments, Unserviceable. Custodian Cdms Fe Prtn, Fdp = 40 Days. Lot Is At Two Stacks In Plot 2. Stack 1 Besides Workshop Wall Near Steel Furniture Lot. Stack 2 Near Broken Tin Shed. Note: Cutting Is Allowed For Easy Loading Of Materials Like Junctions Boxes, Location Boxes, Girders, Pipes .or Items Longer Than Truck Body.

Details: Sources Sought Response Form garrison Dam Spillway Modification Project – Stoplog Seal Modification sources Sought Notice # W9128f25sc005 purpose: By Way Of This Sources Sought Notice, The Usace-omaha District Intends To Determine The Extent Of Capable Small Business And Other Than Small Business Firms That Have The Availability In Providing The Requirement Described Hereunder. The Responses To This Notice Will Be Used For Planning And Development Of The Upcoming Procurement(s). Therefore, This Notice Does Not Constitute A Request For Proposal (rfp), Quotation Or Bid; It Does Not Guarantee The Future Issue Of An Rfq/rfp/ifb; Nor Does It Commit The Government To Contract For Any Supply, Service, Or Construction. There Is No Solicitation Currently Available. further, This Agency Will Not Accept Unsolicited Proposals. Respondents Are Advised That This Agency Will Not Pay For Any Information Or Administrative Cost Incurred In Response To This Notice. All Costs Associated With Responding To This Notice Will Be Solely At The Responding Party's Expense. At This Time, Proprietary Information Is Not Being Requested, And Respondents Shall Refrain From Providing Proprietary Information In Response To This Sources Sought Notice. project Description this Project Is To Modify Up To Eight (8) Of The 18 Stoplogs Fabricated In 2016. Modification Will Include Hauling Stoplogs From The Garrison Project’s Crest Structure Where They Are Currently Stored To A Fabrication Plant Certified Under The Aisc (american Institute Of Steel Construction) Quality Certification Program, And Must Be Designated An Aisc Certified Plant, Category Ibr: Certified Bridge Fabricator – Intermediate, Cbr: Major Bridge Fabrication, Abr: Certified Bridge Fabricator - Advanced Or Hyd: Certified Metal Hydraulic Fabricator With A Fracture Critical Endorsement (fce). The Stoplogs Will Receive Measurement, Minor Weld Modifications, Milling, Partial Painting, Installation Of New Seals, And Fabrication And Installation Of New Springs. The Stoplogs Will Then Be Hauled Back To Garrison Dam And Placed Into The Monolith Bay By The Contractor. The Garrison Project Office Staff Will Deploy The Stoplogs To Test The Sealing Ability Of The Modified Stoplogs. This Installation Test Of Up To Eight (8) Will Inform Changes, If Any, To Future Modifications Of The Remaining Stoplogs And New Stoplogs To Be Completed In A Future Contract. Ideally, The Contractor Could Modify Seals In Winter Of 2025/2026 And Test The Stoplogs In The Summer Of 2026. estimated Project Solicitation Issue Date: 15 April 2025. small Businesses Are Reminded Under Far 52.219-14(c)(1), Limitations On Subcontracting Services. At Least 50 Percent Of The Cost Of Contract Performance Incurred For Personnel Shall Be Expended For Employees Of The Concern. Prior Government Contract Work Is Not Required For Submitting A Response To This Sources Sought Synopsis. project Period Of Performance: 600 Calendar Days. responses please Respond To All Information Requested In This Notice Not Later Than 2:00 Pm Ct, 13 February 2025. Please Include The Sources Sought Notice Identification Number In The Subject Line Of The Email Submission With Attention To: Karen Caskey, Contract Specialist, Karen.l.caskey@usace.army.mil, And Nadine Catania, Contracting Officer, Nadine.l.catania@usace.army.mil. required Information To Be Submitted In Response To This Notice: company Name, Address, Phone Number, Point Of Contract, Email, Web Address: cage Code And Unique Entity Identifier (uei): north American Industry Classification System Code (naics): state Whether Your Firm Is Classified By The Small Business Administration As Any Of The Following: small Business small Disadvantaged Business service-disabled Veteran Owned Small Business (sdvosb) section 8(a) women Owned Small Business (wosb) hubzone none Of The Above is Your Company Currently Registered In System For Award Management (sam)? has Your Company Performed Work For The Federal Government Under A Different Name Or Uei/duns #, Or As A Member Of A Joint Venture (jv)? If Yes, Provide An Explanation: capabilities And Submission Requirements submission Details all Interested, Capable, Qualified, And Responsive Contractors Are Encouraged To Provide Responses To This Request For Information. Companies With Experience In Modifying Stoplogs Are Encouraged To Reply To This Request. Interested Prime Contractors Only Should Submit A Narrative Demonstrating Their Experience In Projects Of Similar Nature As Described In The Project Description. Responders Shall Provide A Brief Narrative Describing A Minimum Of Two (2) To A Maximum Of Three (3) Projects The Interested Firm Has Completed In The Last Seven (7) Years That Were In Remote Locations With Similar Size, Scope, Cost, And Complexity To The Anticipated Project Requirements Described Above. Narratives Shall Be No Longer Than 2 Pages Per Project. Email Responses Are Required. please Include The Following Information In Your Response: company Name, Address, And Point Of Contact, With Phone Number And Email Address cage Code And Uei Number business Size To Include Any Official Teaming Arrangements As A Partnership Or Joint Venture details Of Similar Stoplog Modification Projects In Remote Locations And State Whether You Were The Prime Or Subcontractor start And End Dates Of Work project References (including Owner With Phone Number And Email Address) project Cost, Term, And Complexity Of Job please Include The Following Additional Information In Your Response: would The Company Perform This Work On Their Own, Or Perform Work With Another Company Whom They Have Worked With In The Past On Similar Projects? does The Company Have Any Concerns With Procuring Materials And Complete This Work With The General Schedule Outlined Above? comments provide Comments Or Identify Any Concerns Your Company Has Regarding The Planned Solicitation(s). Note That The Government Will Not Be Responding To Inquiries About The Proposed Solicitation(s) At This Time. Your Responses And Comments Will Be Used By Government Personnel To Assess The Viability And Scope Of The Proposed Solicitation(s) And Will Be Kept In Strictest Confidence. Telephone Inquiries Will Not Be Accepted.