Fabrication Tenders

Details: Description:- 1.marking And Cutting Of 25 Mm Plate, Channels, Angles To Size As Per The Existing structure2.fabricatingthebaseframewithrequiredmountingsupportsfromthefloorlevel 3.matching Of Escapement Arm, Shaft With Bearings. 4.fabrication Of Kicker/escapement Assembly supporting Base Structure. 5.removal Of The Existing Loader After Removal Of Pneumatic Cylinder And pneumatic Connections 6.cleaning The Area Of All Accumulated Debris. 7.fixing Of Fabricated Structure in Place With Rigid Foundation And Align The Escapement Arm With Both Receiving And Dis-charging end Conveyor After Assembly Of Shaft And Bearings With Back Stopper Arrangement. 8.connecting The pneumatic Cylinder, Valves And Pipeline To The New Loader Station With A Frl Unit. 9.full Weld The completestructurewithsupports.provideguiderails,flangeguidesinplace.10.checkthe equipment With Wheel For Smooth Flow Of Wheels And Weld Limit Switch Bracket For Fixing Electrical limit Switches At Required Places For Auto Mode. 11. Paint The All Replaced Structures, Column With onecoatofred-oxideand2 Coats Of Apple Green Paint. Note: A) All Mounting Holes For Pivot bearings, Adjustable Guides, Cylinders Should Have Drilled Holes. B) All Pneumatic Pipe Lines Should Be clamped Using Suitable Pipe Clamps. Rates Are Inclusive Of Gst

Details: Description:- 1.marking And Cutting Of 25 Mm Plate, Channels, Angles To Size As Per The Existing structure2.fabricatingthebaseframewithrequiredmountingsupportsfromthefloorlevel 3.matching Of Escapement Arm, Shaft With Bearings. 4.fabrication Of Kicker/escapement Assembly supporting Base Structure. 5.removal Of The Existing Loader After Removal Of Pneumatic Cylinder And pneumatic Connections 6.cleaning The Area Of All Accumulated Debris. 7.fixing Of Fabricated Structure in Place With Rigid Foundation And Align The Escapement Arm With Both Receiving And Dis-charging end Conveyor After Assembly Of Shaft And Bearings With Back Stopper Arrangement. 8.connecting The pneumatic Cylinder, Valves And Pipeline To The New Loader Station With A Frl Unit. 9.full Weld The completestructurewithsupports.provideguiderails,flangeguidesinplace.10.checkthe equipment With Wheel For Smooth Flow Of Wheels And Weld Limit Switch Bracket For Fixing Electrical limit Switches At Required Places For Auto Mode. 11. Paint The All Replaced Structures, Column With onecoatofred-oxideand2 Coats Of Apple Green Paint. Note: A) All Mounting Holes For Pivot bearings, Adjustable Guides, Cylinders Should Have Drilled Holes. B) All Pneumatic Pipe Lines Should Be clamped Using Suitable Pipe Clamps. Rates Are Inclusive Of Gst

Details: Construction of Pre-fabricated office cum Womens Cell including electrification works at Police Station Nigeen Srinagar.

Description: 291701280014 bracket Assly To Drg. 1210-09.333-024 Alt.1 And Specn. No: Clw/ms/10/028 Alt. 5 (one Loco set Consist Of 06 Nos.) [ Warranty Period: 30 Months After The Date Of Delivery ] ] consignee Sse/ela/16, Clw West Bengal 110.00 Set uvam Item Ref. ( Item Id :- 2100359 - Ms Fabricated Items (small) Group-i-- Built Up Steel section, Steel Chequered Plates, Step Assly. Step Arrangement(wap-5), Foot step Assly.(wag-9) Merchant Flat Bars U/f (for Cab, Sidewall & Roof), Platform assly, Grill Assly (protection Grill For Wind Screen), Conduits Of Cables, Wire rope ,safety Sling For Tm 6fra 6068 For Wag-9h/wap-7, Safety Sling For hanger Lever For Wap-7, Stool For Wap-5 Loco, Bracket Outer Bracket Inner For wag-9 Loco, Steel Chequered Plate, Doorway Surround (lower) )

Description: 29180077 clamp Assly (for Wap-7) Cat No.s/11/0003 C&d No.h319/419 Drg.no.1209-00.240-201 Ref.13 07/ 4/36/81alt.6 [ Warranty Period: 30 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 L acs ] ] consignee General Stores Depot, Blw Uttar Pradesh 148.00 Numbers uvam Item Ref. ( Item Id :- 2100644 - Ms Fabricated Items (small) / Category - Structural- group-iii-- Door Latch Assly, Channel Unistrut, Din Rails, Clips-pneumatic Items, Clamps- pneumatic Items, Protection Plate Assembly For Wag-9/wap-7 (set Of Protection Plate for Wag-9/wap-7), Shim And Pad (06 Items) , Set Of Accessory For Hand Brake arrangement For Wap-7 Loco. Hinge For Wag-9/wap-7 Loco )

Details: Providing And Fabricating And Fixing Of Wooden Sluice Gates With Allied Works Installed At Main Duct 16 Mgd Stp Okhla.

Details: Providing of fabricated step trestle ladder & and self support extension ladder for various reservoir under AE(M)WWCity II Section.

Details: Description Clearing Removal Of Structure & Obstruction Crushed Aggregate Base Coarse Concrete & Masonry Works Fabricated Materials Site Cleaning

Details: Description Item No. Quantity Unit Items And Description Materials 1 4 Pcs Stainless Steel Sheet 4 X 8, 1.2 - 304 2 7 Pcs Stainless Steel Tubular 2 X 4, 1.5 - 304 3 8 Pcs Stainless Steel Tubular 2 X2, 1.5 - 304 4 4 Sets Bearing And Bolt 5 4 Sets Pillow Block 205 6 2 Tank Argon 7 3 Kl Stainless Weldong Rod 8 1 Lot Buffing Materials 9 4 Bag Cement 10 8 Sacks S-1 11 1 Gal Semigloss Latex Paint 12 2 Pcs Paint Roller 13 2 Pcs Roller Tray 1 Labor (fabrication & Installation) Equipment Rental 14 5 Days Handtool (cutter, Grinder) 15 5 Days Welding Machine *****nothing Follows******

France Pavilion Siam 2025, Meknes Morocco