Fabrication Tenders

Details: Description Tarpaulin And Acrylic Production & Installation Project Overview: This Project Involves The Design, Printing, And Installation Of Tarpaulin Banners And Acrylic Signages For Various School Events, Information Dissemination, And Branding Purposes. The Materials Will Be Produced With High-quality, Durable Materials To Ensure Visibility And Longevity. Scope Of Work: 1. Design And Layout • Coordination With School Administration For Content, Layout, And Design Approval • Creation Of Digital Mockups For Tarpaulin And Acrylic Signage Before Printing • Inclusion Of School Logo, Event Details, And Required Text/graphics 2. Tarpaulin Printing And Fabrication • Printing Of Tarpaulin Materials In Various Sizes (e.g., 3x5ft, 4x8ft, Etc.) • Use Of High-resolution, Waterproof, And Uv-resistant Materials For Durability • Finishing Options: Eyelets For Easy Mounting, Reinforced Edges For Added Strength 3. Acrylic Signage Production • Cutting And Fabrication Of Acrylic Boards In Specified Dimensions • Application Of Printed Or Engraved Lettering, Logos, And Graphics • Mounting Options: Wall-mounted, Standee, Or Hanging Installation 4. Installation And Mounting • Proper Placement Of Tarpaulin Banners At Designated Locations (e.g., Stage Backdrop, Gate Signage, Bulletin Boards) • Secure Installation Of Acrylic Signage Using Brackets, Screws, Or Adhesives • Ensuring Stability And Visibility Of All Materials 5. Quality Control And Maintenance • Inspection Of Printed Materials For Any Defects Before Installation • Verification Of Correct Placements And Alignment With Approved Designs • Recommendations For Future Maintenance And Replacement Schedules Expected Outcomes: • High-quality Tarpaulin And Acrylic Signages For School Use • Clear, Professional-looking Materials For Announcements, Events, And Branding • Secure And Durable Installation For Long-term Visibility

Details: Description Tarpaulin And Acrylic Production & Installation Project Overview: This Project Involves The Design, Printing, And Installation Of Tarpaulin Banners And Acrylic Signages For Various School Events, Information Dissemination, And Branding Purposes. The Materials Will Be Produced With High-quality, Durable Materials To Ensure Visibility And Longevity. Scope Of Work: 1. Design And Layout  Coordination With School Administration For Content, Layout, And Design Approval  Creation Of Digital Mockups For Tarpaulin And Acrylic Signage Before Printing  Inclusion Of School Logo, Event Details, And Required Text/graphics 2. Tarpaulin Printing And Fabrication  Printing Of Tarpaulin Materials In Various Sizes (e.g., 3x5ft, 4x8ft, Etc.)  Use Of High-resolution, Waterproof, And Uv-resistant Materials For Durability  Finishing Options: Eyelets For Easy Mounting, Reinforced Edges For Added Strength 3. Acrylic Signage Production  Cutting And Fabrication Of Acrylic Boards In Specified Dimensions  Application Of Printed Or Engraved Lettering, Logos, And Graphics  Mounting Options: Wall-mounted, Standee, Or Hanging Installation 4. Installation And Mounting  Proper Placement Of Tarpaulin Banners At Designated Locations (e.g., Stage Backdrop, Gate Signage, Bulletin Boards)  Secure Installation Of Acrylic Signage Using Brackets, Screws, Or Adhesives  Ensuring Stability And Visibility Of All Materials 5. Quality Control And Maintenance  Inspection Of Printed Materials For Any Defects Before Installation  Verification Of Correct Placements And Alignment With Approved Designs  Recommendations For Future Maintenance And Replacement Schedules Expected Outcomes:  High-quality Tarpaulin And Acrylic Signages For School Use  Clear, Professional-looking Materials For Announcements, Events, And Branding  Secure And Durable Installation For Long-term Visibility

Details: The Us Army Corps Of Engineers, Walla Walla District Is Seeking Sources To Provide Personnel, Materials, Supplies, Equipment, Transportation, Supervision And Other Items And Services For The Following: Mcnary Powerhouse Turbine Draft Tube Slot Filler. the North American Industry Classification System (naics) Code For This Project Is 332312 (fabricated Structural Metal Manufacturing) And The Associated Small Business Size Standard Is 500 Employees. this Sources-sought Announcement Is A Tool To Identify Businesses With The Capability To Accomplish The Work. This Is Not A Solicitation. Only Those Firms Who Respond To This Announcement By Submitting The Following Information Will Be Used In Determining Whether To Set Aside This Requirement. a. A List Of Current Or Past Projects Demonstrating Technical Experience With Work Of A Similar Nature To That Listed In The Bidder Requirements. For Each Project Submitted, Provide A Brief Narrative Statement Of The Work Involved, Your Firm’s Role In The Project, Performance Period, The Dollar Value And The Completion Date. Include A Statement Detailing Any Special Qualifications And Certifications, Applicable To The Scope Of This Project, Held By Your Firm And/or In-house Personnel. b. A Reference List For Each Of The Projects Submitted In A) Above. Include The Name, Title, Phone Number And Email Address For Each Reference. c. Provide A Statement Of Your Firm’s Business Size (hubzone, Service Disabled Veteran Owned, 8(a), Small Disadvantaged, Or Woman-owned) With Regards To The Naics Code Listed Above. d. Provide A Statement That Your Firm Intends To Submit An Offer On The Project When It Is Advertised. e. Provide A Statement Of Your Firm’s Bonding Capacity. A Statement From Your Surety Is Not Required. f. Cage Code And Sam Unique Id Number. submit This Information To Alan Inglis, Contract Specialist, Via Email To: Alan.n.inglis@usace.army.mil summary Of Scope Of Work: this Project Will Include Fabrication And Delivery Of 12 Structural Steel Turbine Draft Tube Slot Fillers. This Includes 6 Sets, With Each Set Containing One North And One South Draft Tube Slot Filler. The Sets Are Mirrors Of Each Other And Are Very Similar Structurally. Each Draft Tube Slot Filler Uses Welded Astm A572 Grade 50 Structural Steel Plates, Astm A1085 Hollow Structuralsections (hss) Steel, And Has Small Uhmw Components. Each Slot Filler Is A Picture Frame Shape Approximately 35 Ft Wide, 20 Feet Tall, And 3 Ft Deep. There Are 20 Ft Tall Legs Made From Rectangular Hss As The Sides To The Picture Frame Shape. Each Slot Filler Will Weigh Approximately 35,000 Pounds, Mostly Consisting Of Steel. The First Slot Filler Set Requires An Epoxy Polysiloxane Paint System And The Remaining 5 Sets Require 5-e-z Vinyl Paint. One Test Slot Filler Set Will Be Delivered First. The Test Set Will Be Installed, Inspected, And Tested By Mcnary Project Personal. If Any Design Changes Are Needed, They Will Take Place At This Time. Once The Test Set Is Tested And Any Design Changes Are Completed, The Contractor Will Be Released To Fabricate And Deliver The Remaining 5 Sets. bidder Requirements: 1. The Fabricating Plant And Fabricator Is Required To Be Certified Under The Aisc (american Institute Of Steel Construction) Quality Certification Program With One Of The Following Certifications: abr: Certified Bridge Fabricator – Advance ibr: Certified Bridge Fabricator – Intermediate hyd: Certified Metal Hydraulic Fabricator bu: Certified Building Fabricator the Contractor Must Be Certified Prior To Award Of This Contract And Must Remain Certified For The Duration Of This Contract. Submit Copies Of The Aisc Certificate(s) Indicating That The Fabrication Plant Meets The Specified Structural Steelwork Category. 1.1 In Addition, The Fabricator Is Required To Have Completed Two Projects Of Similar Scope In The Past Ten Years. Submit Documentation For Experience Indicating That The Fabrication Plant Has Completed Projects Of Similar Scope As Identified Below. projects Of Similar Scope Consists Of Having Fabricated Structures With The Following Minimum Requirements: weight Of 15-tons Or Greater. member Thicknesses Of 1/2-inch Or Greater. length, Width, Or Height Of Structure Of At Least 20-ft. minimum Tolerances Of +/- 1/8-inch Out Of Parallel Over Mat Least 20-ft. adequate Crane Capacity Capable Of Picking And Maneuvering The Structures Within Fabrication Building. Maneuvering The Individual Component Includes Any Rotating About Any Axis Of The Structure That May Be Required For Fabrication And Weld Distortion Control. 2. The Painting Contractor Must Be Certified By Association For Materials Protection And Performance (aamp) With An Sspc Qp 3 Certification For All Surface Preparation And Coating Application. Submit A Copy Of The Applicable Certificates/endorsements. The Contractor Must Be Certified/endorsed Prior To Award Of This Contract And Must Remain Certified/endorsed For The Duration Of This Contract. 2.1 In Addition, The Painting Contractor Is Required To Have Completed Two Projects Of Similar Scope In The Past Ten Years. Submit Documentation For Experience Indicating That The Painting Contractor Has Completed Projects Of Similar Scope As Identified Below. projects Of Similar Scope Consists Of Having Painted Steel Structures With The Following Minimum Requirements: application Of Usace Vinyl Paint System No. 5-e-z surface Preparation Of Sspc Sp 5. dimensions: See Attached File (draft Tube Slot Filler Dimension Drawing.pdf).

Details: Amended 2/6/2025 1. This Solicitiation Will Be Set Aside For Small Businesses. The Naics Code Is 339116, Dental Laboratories, Size Standard 500 Employees. 2.description Of Services: The Contractor Shall Fabricate High Quality Dental Prosthetics For The Va Puget Sound Health Care System (vapughcs) Dental Service And Provide Transportation And Delivery Services Directly To And From Their Seattle, Tacoma, And Mt Vernon Wa Clinics. The Contractor Shall Provide Dental Laboratory Support For The Fabrication Of Removable, Fixed, Maxillofacial, Surgical, And Implant Prosthetics To The Vapughcs Dental Service. The Contractor Shall Provide All Transportation, Shipping, Delivery, Labor, Supplies, Supervision, Quality Assurance And Materials Required To Fabricate Dental Prosthetics In Accordance With Dental Laboratory Prescription Specifications. The Contractor Shall Provide All Necessary Shipping And Packaging Materials To Ensure Safe And Secure Transit. The Contractor Shall Be A Full-service Dental Laboratory That Can Integrate The Combined Treatment Needs Of The Dental Prosthetic Patient Requiring Simultaneous Surgical, Fixed, Removable, Maxillofacial, And Implant Supported Prostheses. 3.period Of Perfomance: Base + Four (4) Option Years. 52.217-8 Will Be Included For An Additional Six-month Extension, If Applicable. Anticipated Start Date Is Approximately 23 February 2025.

Details: The Work Consist Of Fabrication And Installation Of Shielded Transport And Support Structures.synchrotron Beamlines At The Advanced Photon Source (aps) Transport Hard X-ray Beams Betweenshielded Experimental Enclosures By Use Of Shielded Transports. This Work Will Involve The Design, Offsitefabrication, Shipping And Installation Of Shielded Transports To Bridge The Approximately 6 M Gapbetween Enclosures At Beamline 34-id At The Advanced Photon Source. all Documents Are In This Paswword Protected Box Folder.to Obtain The Password Please Email The Procurement Official Robert Kman (kman@anl.gov) For Access. box Link: Https://anl.box.com/s/0rrrux9vsgscsvs81qi5d5nidv0jj63w

Details: This Request For Information Is For The Purposes Of Gathering Information From The Marine Electrical, Steel Fabrication, And Ship Building Industry To Ascertain The Interest And Capability To Design-build Marine Electrical And Marine Structural Infrastructure (the “services”) For The Island Class Terminal Electrification Program (the “program”). The Program Will Introduce Four (4) Rapid-charging Facilities On Two Inter-island Routes (route 19-nanaimo Harbour-gabriola Island & Route 23-campbell River – Quathiaski Cove), Allowing The New Plug-in Hybrid Diesel-electric Island Class Vessels, Currently Under Construction, To Operate In Full Electric Mode. Bc Ferries Has Identified The E-house Solution To Be An Integrated Power Assembly Within A Steel Pontoon Designed For Placement In Salt Water For The Entire Duration Of Its Design Life (“floating E-house”).

Details: This Request For Proposal Is Only For: Cowi North America Ltd. Lex3 Engineering Inc. Mcelhanney Ltd. Any Submission Received From Others Will Be Returned Without Review. Alberta Transportation And Economic Corridors Requests The Submission Of Proposals For: Bf02240-1, Carrying Hwy. 28 Over Thinlake River Bridge Deck Waterproofing And Other Work Bf78802-2, Carrying Hwy. 60 Over Hwy 16 Bridge Deck Waterproofing And Other Work Bf85160-1, Carrying 41 Avenue Over Hwy. 2 Bridge Deck Asphalt Overlay And Other Work Preliminary Engineering, Detailed Design, Contract Tendering, Contract Administration Construction And Fabrication Supervision, Post Construction And Warranty Inspection For Bridge Deck Waterproofing, Bridge Deck Asphalt Overlay And Other Work.

Details: Description Scope Of Work: Item Description Qty Unit 100 Clearing And Grubbing 48.00 Sq.m. 103 Structure Excavation (combination Of Soil And Solid Rocks) 25.27 Cu.m. 401 Fabrication And Installation Of Gi Pipe Railings 12.00 In.m. 404 Reinforcing Steel (footings . Columns & Beams) 1,172.39 Kgs. 405 Structural Concrete (footings , Columns & Beams) 6.57 Cu.m. 505 Grouted Riprap 51.00 Cu.m. Spl I Hauling Of Construction Materials (100 Mtrs) 79.50 Cu.m. Spl Ii Clearing And Hauling Out Of Debris 26.06 Cu.m. B.7 Construction Safety And Health , Signs And Barricades Ls Ls

Details: Procurement Of Fabricated Tank With Tunnel Excavation Simulation Mechanism

Details: Description:- Supply Of Material, Fabrication, Erection, Testing And Commissioning Of 12.5 M High mast Totally Hot Dip Galvanized And Suitable For Wind Velocity Bas Par Is 875 Part-3. The Mast Shaft shall Be In Two Finished Sections. It Shall Also Include Accessories For 12.5 M High Mast Including Head frame, Steel Wire Rope 6mm Dia(7/19 Construction) Single Drum Which , Galvanized Lantern Carriage arrangement Suitable For 6 Luminaries Symmetrically And It Control Gear Boxes And Lighting Final With integral Power Tool Along With Accessories As Per Detailed Specifications Attached. The Mast Shall have One Longitudinal Weld And Single Dipping (hot Dip Galvanized) As Per Section Without Luminaries.