Fabrication Tenders

Description: Supply, Installation, Testing & Commissioning Of Lt Copper Distribution Panel Fabricated From 16 Swg Crca,

Description: Fabrication Assembly & Commissioning Of 12 Nos

Description: 12161ms24k, 98050011, Quantity- 102.430 Mts. Scrap Condemned Unserviceable Ms- Cs Mixed Scrap Of Carriage And Wagon And Loco Items Consisting Of Bolts, Nuts, Pins, Washers, Cotters, Head Blocks, Distance Blocks Screw Rods, Handle Supporting Bare Plates, Ms Back Locks, Mmts Racer Cover, Locking Screws, Nuts, Bmbc Components, Jigs Fixtures And Loose Spares, Safety Nuts, Jack Wheel Arms, Schaku Couplers, Coupler Spares, Tension Rods, Sheet Cut Pieces, Levers, Links, Iron Skids, Anti Roll Bar With Fork Link, Pins Electroplated, Cut Pieces Of Angles, Pipes, Channels, Flats, Plates, Rod Cut Pieces, Sabs, Cbc Housings, Common Pipe Bracket, Pivot Caps, Buffer Plates, Cbc Coupler Handles, Coupler Rods, Barrel Bush, Silent Blocks, Shackles, Wide Jaw Adaptor, Clamps, Compensating Ring, Wire Rope, Push Pull Rods, Towing Trolley, Jack Frame, Anchor Links, Lashing Chain Assembly, Destroyed Hangers And Blocks, Cap For Fuel Inlet Pipe Assembly, Cbc Back Stopper Plates, Brackets, Gear Wheels, Sheets, Pivots, Washers, Equalizing Stays, Dampers, Shock Absorbers, Dmb Rings, Dashpots, Trolley Wheels, Brake Shoes, Compressor Parts, Brake Heads, Keys, Dip Lorry Wheels, Stays Rings, Chain Cut Pieces, Draw Bar Spindle Rod, Draw Bar Support Beam, Ferrous Scrap Of Emus, Body Gear, Under Gear, Spring Gear, Draw Gear, Cbc Operating Handle, Cbc Supporting Device, Cbc Support Plate, Air Spring Suspension Bellow, Suspension Rod, Socket, Ring Retainer, Long Bolts, Mmts Rear Cover, Speedo Meter Cover, Retainer Cap, Brake Cylinder, Brake Calliper, Center Pivot, Equalizing Lever, Axle Box Covers, Berth And Door Frames, Filters, Lever Hangers, Ci Cylinder Bodies, Diesel Loco Items, Ci Hose Cocks, Piston, Piston Trunk, Ratchet With Screw Rods, Flanges, Destination Boards, Small Dia. Springs, Hooks, Articulated Lock Lift Lever Assembly, Collars, Links, Pivots, Cylinder Body, Bp And Fp Cocks, C.r.tank, Locking Screw, Locking Cups, Dmb Ring, Sab End Push Rod, Sand Ejectors, Adaptors, Wearing Plate, Centre Pivot Cover, Z Levers, Springs, Caliper Bolts, Reducing Bushes, Control Arms, Seaters, Center Pivot Tops, Pull Rods, Punching Dies, Round Rods, Bogie Under Frame Cut Pieces, Ms Drilling Jig, Horizontal Bolts, Hex Bolts With Nuts, Dividing Plates, Side Bearer Guide, Lever Box, Center Pivot Bottoms, Ct Rb Bearing Components, Fabricated Structures Of Sorts And Sizes, With Or Without Attachments Of Rubber, Fiber, Nylon Bushes And Other Similar Carriage, Wagon, Mmts, Emu, Dmu And Loco Items Including Rusted And Corroded Sheets. Location- Bin No- 161, Left Side Of Road No- 1. Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery, As Per Motor Vehicle Act 1988.

Details: Description the Naval Sea Systems Command (navsea) Is Issuing This Sources Sought As A Means Of Conducting Market Research To Identify Parties Having An Interest In, And The Resources To Support, This 1 January 2026 – 31 December 2027 Requirement For Two (2) Post Delivery Docking Availabilities Of Freedom Class Littoral Combat Ships (lcs) Within 1,000 Miles Of Mayport Naval Station, Fl. facility Requirements Include: u.s. Navy Dry Dock, Certified In Accordance With Mil-std-1625d (sh) And Capable Of Docking A Lcs Freedom Class Vessel (~3,500 Tons, Length 378 Ft., And Beam 57.7 Ft.) ship Pier/berthing Capability (minimum Pier Side Depth Of 19 Feet Required). secure, Humidity And Temperature Controlled Warehouse/storage Facilities To Accommodate Pre-positioning And Long Lead Time Material Procured By The Planning Yard And Combat Systems And Electronics Equipment Storage. government And Ship’s Force Office Space For At Minimum 100 Personnel, To Include Internet And Phones. Parking For Those Individuals Within A 15-minute Walk Of The Facility. sufficient Indoor And Outdoor Production Facilities To Perform Marine Pre-fabrication, Repair, And Machining Onsite. crane To Support Lifts Up To 100 Ton Capacity. electrical: 400 Amps Capacity, 440 Volts Ac, 60 Hz, And 3 Phase Iaw Ufc 4-150-02 Appendix C, Table C-7. Capability To Provide Back-up Electrical Power. potable Water: 4000 Gallons Per Day (gpd) @ 55-60 Pounds Per Square Inch (psi) Iaw Ufc 4-150-02 Appendix C, Table C-4. provide Oily Waste/waste Oil Discharge Service In Accordance With Ufc 4-150-02 Appendix C, Table C-5. sea Water/firefighting Water: 1,800 Gallons Per Minute (gpm) Capability, @ 100 Psi Measured At The Most Remote Outlet Iaw Ufc 4-150-02 Appendix C, Table C-3. sewage: Ability To Accommodate And Dispose Of 1,000 Gpd Of Effluent And 1,000 Gpd Of Wastewater Iaw Ufc 4-150-02 Appendix C, Table C-6. berthing Modules Or Barge For Ship’s Force 20-personnel Duty Section Within The Facility. anti-terror/force Protection Capability At The Contractor's Facilities In Accordance With Navsea Standard Item 009-72. navsea Qualified Aluminum And Steel Welding Capability In Accordance With Navsea Technical Publication Requirements For Welding And Brazing Procedure And Performance Qualification S9074-aq-gib-010/248. work Shall Be Completed In Accordance With Navsea Standard Items As They Apply To Execution Work Package, Including Navy Tag-out Requirements, And In A Manner Which Affords For Naval Supervisory Authority Certification Of The Availability. original Equipment Manufacturer (oem)/foreign National Contractor Third-party Access. this Is A Sources Sought Notice Only. This Sources Sought Is For Informational Planning Purposes And Is Not To Be Construed As A Commitment By The Government For Any Actual Procurement Of Materials, Machinery, Or Services. This Notice Does Not Constitute A Solicitation Or A Promise Of A Solicitation In The Future. This Sources Sought Does Not Commit The Government To Contract For Any Supply Or Service. Respondents Are Advised That The Government Will Not Pay For Any Information Or Administrative Costs Incurred In Response To This Sources Sought. All Costs Associated With Responding To This Sources Sought Are Solely At The Responding Parties’ Expense. responses To This Notice Are Not Offers And Will Not Be Accepted By The Government To Form A Binding Contract Or Agreement. The Government Will Not Be Obligated To Pursue Any Particular Acquisition Alternative Because Of This Sources Sought. Responses To The Sources Sought Will Not Be Returned. Not Responding To This Sources Sought Does Not Preclude Participation In Any Future Solicitation, If One Is Issued. Specific Responses To The Approaches Will Not Disqualify Or Have An Impact On Participation And Evaluation On Future Solicitations. responses To This Rfi May Be Considered In The Future Determination Of An Appropriate Acquisition Strategy For The Program. standard Item References Available At Https://www.navsea.navy.mil/home/rmc/cnrmc/our-programs/ssrac/, Other References Available Upon Request. instructions: reponses To This Sources Sought Request Should Reference Lcs Freedom Class Dry Dock And Include The Following Information In This Format: 1. Company Name, Address, Point Of Contact Name, Phone Number, And Email Address. 2. Contractor And Government Entity (cage) Code And Sam Unique Entity Id. 3. Business Size To Include Number Of Employees And Office Location(s) 4. Tailored Capability Statements Addressing The Facility Requirements Listed In The Section Above. 5. Prior/current Corporate Experience Performing Efforts Of Similar Size And Scope Within The Last Three (3) Years, Including Contract Number, Organization Supported, Indication Of Whether A Prime Or Subcontractor, Contract Value, Government Point Of Contact With Current Telephone Number, And A Brief Description Of How The Contract Referenced Relates To The Technical Services Described In The Facility Requirements. 6. Management Approach To Staffing This Effort With Qualified Personnel Which Should Address Current Hires Available For Assignment To This Effort, And Possible Subcontract/teaming Arrangements. documentation Of Technical Expertise Must Be Presented In Sufficient Detail For The Government To Determine That Your Company Possesses The Necessary Functional Area Expertise And Experience To Compete For This Acquisition. Standard Company Brochures Will Not Be Reviewed. Submissions Are Not To Exceed Ten (10) Typewritten Pages. respondents Are Responsible For Properly Marking And Clearly Identifying Proprietary Information Or Trade Secrets Contained Within Their Response. The Government Will Not Be Liable For, Or Suffer Any Consequential Damages For, Any Proprietary Information Not Properly Marked And Clearly Identified. Information Provided Shall Be Treated As Controlled Unclassified Information And Will Not Be Shared Outside Of Government Activities And Agencies. interested Parties Who Consider Themselves Qualified To Perform The Herein Described Efforts Are Invited To Submit A Response To This Sources Sought Notice By 5:00 Pm Eastern Standard Time On 10 March 2025. In Order To Submit Your Business-sensitive Response Securely Via The Dodsafe Portal, Send An Email Request For An Upload Link To Procuring Contracting Officer (pco) Brian Blasser At Brian.w.blasser.civ@us.navy.mil And The Contract Specialist Vincenzo Bianco At Vincenzo.l.bianco.civ@us.navy.mil.

Description: Exhibit Fabrication For Ninety Six National Historic Site

Description: France – Bitumen – Fabrication Et Livraison D'émulsion De Bitume De Type R69 Avec Location D'une Citerne Fixe De Stockage De Produit

Description: Procurement Of Materials For Fabrication Of Long Computer Tables For Shs Ict Room , Hardware And Construction Supplies ,dr. Vicente F. Gustilo Memorial National High School

Details: Description Item No. Description Unit Qty 801 Removal Of Existing Dilapidated Sidewalk, Curb And Driveway Cum 11.25 Spl1 Concrete Footing, Pedestal And Sidewalk (with Reinforcement) Lump Sum 1.00 600 Concrete Works (curb And Gutter Including Sidewalk And Stairs/ Steps Restoration And Wall Plastering) Cum 6.98 Spl3 Fabrication And Installations Of Sidewalk Canopy, Frames And Roofing (including Fabrication Of Truss At Machine Shop) L.m. 22.00 1061 Railings L.m. 66.00 1032 Painting Works (canopy Framing And Railings) Sqm 36.80 Spl1 Site Clearing Lot 1.00 B.7 Construction Safety And Health Lot 1.00

Description: A25-017 Cerp B-52 Shoring Cradle caution: this Market Survey Is Being Conducted To Identify Potential Sources That May Possess The Expertise, Capabilities, And Experience To Meet The Requirements For Qualification And Production Of The Cerp B52 Shoring Cradle For Use By United States Air Force (usaf) Personnel. The Level Of Security Clearance And Amount Of Foreign Participation In This Requirement Has Not Been Determined. Contractors/institutions Responding To This Market Research Are Placed On Notice That Participation In This Survey May Not Ensure Participation In Future Solicitations Or Contract Awards. The Government Will Not Reimburse Participants For Any Expenses Associated With Their Participation In This Survey. instructions: 1.below Is A Document Containing A Description Of The Cerp B52 Shoring Cradle Requirement And A Contractor Capability Survey, Which Allows You To Provide Your Company’s Capability.a)item Descriptionb)drawings2.if, After Reviewing These Documents, You Desire To Participate In The Market Research, You Should Provide Documentation That Supports Your Company’s Capability In Meeting These Requirements. Failure To Provide Documentation May Result In The Government Being Unable To Adequately Assess Your Capabilities. If You Lack Sufficient Experience In A Particular Area, Please Provide Details Explaining How You Would Overcome The Lack Of Experience/capabilities In Order To Perform That Portion Of The Requirement (i.e., Teaming, Subcontracting, Etc.)a.identify Any Areas Of Work That Your Organization Believes Should Be Broken Out Exclusively For Small Business.3.both Large And Small Businesses Are Encouraged To Participate In This Market Research. Joint Ventures Or Teaming Arrangements Are Encouraged.4.questions Relative To This Market Survey Should Be Addressed To Andrew Hutchcraft, Andrew.hutchcraft@us.af.mil. cerp B-52 Shoring Cradle purpose/description the Government Is Conducting Market Research To Identify Potential Sources That Possess The Production Data/repair Data, Expertise, Capabilities, And Experience To Meet Qualification Requirements For The Procurement Of Fuselage Shoring And Trailers. It Shall Include: 565 Amxs Shoring Specifics 1.(1 Each) Cradles At Body Stations; 345, 435, 1484, 110, 175, 1719, 1655 (total Of 7 Cradles Perset). 2.use Soft Rubber At Contact Surface Of The Cradles To Avoid Damage To The Aircraft 3.there Should Not Be Any Air Gaps While Supporting The Aircraft 565 Amxs Shoring Trailer Specifics 1.dimensions Are: 6'‐0 Wide X 16'‐0 Long. 2.wallace Forge Coupler Ring 16137 3.#84 Trailer Wheel Spindle Sp20484 At The Front & Rear Axles 4.idler Hub Rated At 3,500 Pounds 5.205/65‐10 Tire & 10" Wheel With Load Rating "c" 6.all The Seven Cradles Can Be Secured On The Trailer At Same Time. contractor Capability Survey a25-017 Cerp B52 Shoring Cradle part I. Business Information please Provide The Following Business Information For Your Company/institution And For Any Teaming Or Joint Venture Partners: •company/institute Name: •address: •point Of Contact: •cage Code: •phone Number: •e-mail Address: •web Page Url: •size Of Business Pursuant To North American Industry Classification System (naics) Code: based On The Above Naics Code, State Whether Your Company Is: •small Business(yes / No) •woman Owned Small Business(yes / No) •small Disadvantaged Business(yes / No) •8(a) Certified(yes / No) •hubzone Certified(yes / No) •veteran Owned Small Business(yes / No) •service Disabled Veteran Small Business (yes / No) •central Contractor Registration (ccr).(yes / No) •a Statement As To Whether Your Company Is Domestically Or Foreign Owned (if Foreign, Pleaseindicate The Country Of Ownership). written Responses, No Facsimiles Please, Must Be Received No Later Than Close Of Business 02/28/2025. Please Email Two (2) Your Response To: a25-017 Cerp B52 Shoring Cradle attn: Andrew Hutchcraft email: Andrew.hutchcraft@us.af.mil questions Relative To This Market Research Should Be Addressed To Andrew Hutchcraft, Andrew.hutchcraft@us.af.mil part Ii. Capability Survey Questions a.general Capability Questions: 1.experience And Expertise: owhat Experience Do You Have With Manufacturing, Fabricating, And Weldingequipment For Aerospace Or Similar Industries? ocan You Provide Examples Of Similar Projects You Have Completed In The Past? 2.design And Engineering: odo You Have In-house Design And Engineering Capabilities To Review And Validatethe Shoring Equipment Design? ocan You Provide Engineering Drawings And Calculations To Support The Design Andfabrication Of The Equipment? owhat Software Do You Use For Design And Simulation Of The Shoring Equipment(e.g., Cad, Cae, Fea)? ocan You Provide Examples Of How You Have Used Simulation Tools To Optimize Thedesign Of Similar Equipment? owhat Cam Software Do You Use To Program And Control Your Manufacturingequipment (e.g., Cnc Machines, Robots)? ocan You Provide Information On How You Use Cam To Ensure Accuracy Andefficiency In Your Manufacturing Processes? 3.materials And Manufacturing: owhat Materials Will Be Used For The Fabrication Of The Shoring Equipment, And Arethey Compliant With Relevant Aerospace Standards (e.g., As9100)? odo You Have The Necessary Manufacturing Capabilities, Such As Machining,cutting, And Welding, To Produce The Equipment? owhat Manufacturing Equipment Do You Use To Produce The Shoring Equipment(e.g., Cnc Machines, Welding Robots, 3d Printers)? ocan You Provide Information On The Capabilities And Limitations Of Yourmanufacturing Equipment? 4.welding And Joining: owhat Welding Processes Will Be Used (e.g., Mig, Tig, Arc), And Are Your Welderscertified To Relevant Standards (e.g., Aws, Asme)? ocan You Provide Welding Procedure Specifications (wps) And Welderqualification Records? 5.testing And Inspection: owhat Testing And Inspection Procedures Will Be Used To Ensure The Equipmentmeets The Required Specifications And Standards? ocan You Provide A Testing And Inspection Plan, Including Any Necessarycertifications (e.g., Ndt, Pressure Testing)? owhat Software Do You Use For Quality Control And Inspection (e.g., Cmm, Visionsystems)? 6.certifications And Compliance: oare You Certified To Relevant Industry Standards, Such As As9100 (aerospace), Iso9001 (quality Management), Or Iso 14001 (environmental Management)? ocan You Provide Documentation Of Compliance With Relevant Regulations, Such Asosha, Epa, Or Faa Requirements? 7.facilities And Equipment: owhat Facilities And Equipment Do You Have Available For Manufacturing,fabricating, And Welding The Shoring Equipment? oare Your Facilities And Equipment Properly Maintained, Calibrated, And Certified? 8.quality Control And Assurance: owhat Quality Control And Assurance Processes Do You Have In Place To Ensure Theequipment Meets The Required Specifications And Standards? ocan You Provide A Quality Control Plan, Including Any Necessary Inspections,testing, And Documentation? 9.supply Chain And Procurement: owhat Is Your Process For Sourcing And Procuring Materials And Components For Theshoring Equipment? ocan You Provide Information On Your Suppliers, Including Their Qualifications Andcertifications? 10.delivery And Support: owhat Is Your Expected Delivery Schedule For The Shoring Equipment, And Whatsupport Will You Provide During Installation And Commissioning? ocan You Provide Information On Your Warranty, Maintenance, And Repair Policies? b.commerciality Questions: 1.are There Established Catalog Or Market Prices For Our Requirement? If You Offer Thisproduct And/or Service To Both U.s. Government And Commercial Sources, Is The Sameworkforce Used For Both The U.s. Government And General Public? Is Our Requirementoffered To Both Under Similar Terms And Conditions? Briefly Describe Any Differences. 2.describe Your Standard Warranty And Return Process For Goods And Services Furnished Tothe Government For Items Similar In Nature To This Requirement.

Description: Supply, Delivery, Installation, And Commissioning Of Steel Gates (re-bidding) , Metal Fabrication ,national Irrigation Administration - Aklan-capiz Irrigation Management Office