Electrical Work Tenders

Details: Description General Requirements 2 Lot Mobilization/demobilization Concreting Works 22 Cu.m Concret Base Flooring & Foundation (f1,c1,c2,c3) 204 Bags Cement 40 Kg 12 Cu.m Sand 24 Cu.m Gravel 3/4" Steel Works Steel Post And Flooring Reinforcement Bars 40 Pcs. Baseplate 10"x10"x100mm 160 Pcs. Anchor Bolt With Nut & Washer 1/2" 28 Pcs. Circular Steel Pole 3" 3mm 3m 12 Pcs. Circular Steel Pole 4" 3mm 3m 18 Box Wielding Rod Bot 5kg 148 Pcs. Steel Bar 10mm 6m 8 Kg. Tie Wire #16 Truss-1 56 Pcs. Angle Bar 4mm 6m 50x50 24 Pcs. Steel Plate 6mm 6x6 96 Pcs. Bolts And Nuts & Washer 2" Truss-2 40 Pcs. Angle Bar 4mm 6m 50x50 16 Pcs. Steel Plate 6mm 6x6 64 Pcs. Bolts And Nuts & Washer 2" Strut 46 Pcs. Angle Bar 2mm 6m 50x50 Steel Matting 20 Pcs. Steel Bar 10mm 6m 20 Pcs. Steel Matting 2x2x4x8 Roofing Works 80 Pcs. Corrugated Roof (pre-painted) 0.95x16ft. 16 Box Tek Screw 3" 8 Pcs. Ridge Roll 0.5mmx18ft. 132 Pcs. C-purlins 6m 100mx50mmx1.2mm Thick 192 Pcs. Angle Plate 25x25x28 Painting Works Steel Post And Structural Members 4 Liters Topcoat Quick Drying Enamel 4 Gal Metal Primer 12 Liters Paint Thinner Formworks 40 Pcs. Plywood Ordinary 1/4"x4"x8" 64 Pcs. Coco Lumber 2x2x8 12 Kg. Common Nail 3" Carpentry Works Wall Structure 140 Pcs. Coco Lumber 2x2x8 100 Pcs. Coco Lumber 2x3x8 Wall Plywood 80 Pcs. Plywood Ordinary 1/4"x4"x8" 20 Kg Cwn Assorted 4 Set Blackboard 1200x4800 Complete Set 8 Set Wooden Flush Door Complete Set 100cmx210cm Ceiling Insulation 6 Roll Insulation Foam 12mm 7 Slide Aluminum Foil 1x50m Electrical Works 4 Pcs. Safety Breaker 30a 4 Box Thhn Wire 3.5mm 2 24 M Thhn Wire 5.5mm 2 88 Pcs. Pvc Electrical Pipe 1/2" 48 Pcs. Junction Box 80 Pcs. Male Adapter 1/2" With Lock 16 Pcs. Amco Box(or Utility Box) 8 Set Duplex Outlet 92-gang) 4 Set Switch (1-gang) 4 Set Switch (2-gang) 24 Pcs. Receptacle 4"x4" 24 Pcs. Led Bulb 18 Watts 16 Unit Ceiling Fan 18" 120 Pcs. C-clamp 1/2" 240 Pcs. Metal Screw 4 Pcs. Entrance Cap 1/2" 40 M Duplex Wire #6 8 Pcs. Electrical Tape(big) 4 Pcs. Screw Insulator

Details: Project Update 10 February 2025: The Bidder Site Survey Attendance Sheet Is Attached. Site Survey Was Held On 7 February 2025. ********************************************** solicitation Notice Update 15 January 2025: The Project Magnatude Is Corrected As Follows - project Magnitude: Between ¥100,000,000 And ¥500,000,000 (japanese Yen) (fars 36.204) ********************************************** the U.s. Army Corps Of Engineers, Japan District (poj) Is Providing A Solicitation Notice Pursuant To Far 36.213-3 For An Upcoming Invitation For Bid (ifb). project Information project Title: Replace Afn Radio Transmission Tower, Camp Kinser project Location: Okinawa, Japan product Service Code (psc): Z2bg – Repair Or Alteration Of Electronic And Communication Facility naics Code: 236220 – Commercial And Institutional Building Construction project Magnitude: Between ¥100,000,000,000 And ¥500,000,000,000 (japanese Yen) (fars 36.204) construction Type: Design-bid-build (dbb) Construction project Description: this Project Is To Replace The American Forces Network (afn) 300-feet (91.44 Meters) Amplitude Modulation (am) Medium Frequency Antenna System Tower And Install New Radials. The Project Is Located At Camp Kinser Transmitter Site, Near Building 951, Okinawa, Japan. The Existing Afn Am Radio Transmission Tower Antenna System At Camp Kinser Will Be Replaced By A New Cylindrical Guyed Tower Antenna System. The New Antenna System Will Consist Of A New Cylindrical Guyed Tower Mast, Antenna Tuning Unit (atu) And Bonded Guy Wire To The Top Of The Tower (insulated Such To Provide An Effective 379.5-feet (115.67 Meters) Of Antenna Length). Electrical Scope Of Work Will Include The Removal Of The Existing Overhead Power Feeder For The Existing Tower, And Provision Of New Underground Feeder, New Led Fencepost Lighting And Weatherproof Receptacles, And Power Connections To Supplement The Function Of The New Antenna System. Structural Work Will Include Demolition And Provision Of A New Afn Radio Transmission Tower System And The Demolition And Provision Of New Tower And Guy Wire Foundations. Civil Work Scope Will Include Support To Construction Activities Such As Minor Grading Work For The New Antenna Tuning Unit (atu) Pad And Areas Directly Above New Foundations, Removal And Providing New Typical Precast Concrete Chain Link Fence Around The Area Directly Below The Tower That Will Be Affected By The Tower Demolition Work, And Fence Affected By The Required Site Access To The Project. solicitation Information: procurement Method: Invitation For Bid (ifb) Solicitation. the Government Intends To Award A Firm-fixed-price Construction Contract As A Result Of The Ifb. all Interested Companies Shall Be Actively Registered In The System For Award Management (sam) Database In Order To Be Eligible For Award Of Government Contracts. Information On Registration And Annual Confirmation Requirements May Be Found At Http://www.sam.gov. For A Joint Venture, The Joint Venture As An Independent Entity Must Be Registered In Sam As Such. only Local Sources Will Be Considered Under This Solicitation. This Contract Will Be Performed In Its Entirety In The Country Of Japan And Is Intended Only For Local Sources. Only Local Sources Will Be Considered Under This Solicitation. Local Sources Are Sources (e.g. Corporations, Partnerships, Or Joint Ventures [for A Joint Venture, The Joint Venture As An Independent Entity Must Satisfy The Local Source Requirements Or, In The Alternative, Each Member Of The Joint Venture Must Individually Satisfy The Local Source Requirements]) That Are Physically Located In Japan And Authorized (i.e. Licensed And Registered) To Perform In Japan, The Type Of Construction Work Specific In This Solicitation. Specifically, A Prospective Offeror Must Be Duly Authorized To Operate And Conduct Business In Japan And Must Fully Comply With All Applicable Laws, Decrees, Labor Standards, And Regulations Of Japan During The Performance Of The Resulting Contracts. Offerors Are Required To Be Registered With The Government Of Japan To Do Construction Work In Japan And Possess Necessary Construction Licenses And Permits To Perform Work Required Under This Solicitation At The Time An Offer Is Submitted. Construction License Will Be Verified Through The Government Of Japan – Ministry Of Land, Infrastructure, Transport, And Tourism (milt) Https://etsuran2.mlit.go.jp/takken . The U.s. Government Will Not Offer “united States Official Contractor” Status Under Article Xiv Of The Us-japan Status Of Forces Agreement (sofa) To U.s. Contractors Normally Resident In The United States; Nor Will The U.s. Government Certify Employees Of Such Contractors As “members Of The Civilian Component” Under Article I(b) Of The Sofa. u.s. Army Corps Of Engineers, Japan District, Poc: primary: norman Roldan contract Specialist 098-970-9041 norman.roldan@usace.army.mil alternate: jack T. Letscher contracting Officer 098-970-4402 jack.t.letscher@usace.army.mil

Description: Providing Face Lifting Works To The Toilets Of G 1 Ward, Near X Ray Department, Ground Floor And First Floor Toilets Located At Prs Building Of Industrial Health Centre, Hal Bc Including Civil Electrical Works.

Details: Sources Sought: The 1st Special Operations Contracting Squadron Is Publicizing This Sources Sought Notice To Gather Industry Interest And Information With Respect To A Potential Indefinite Delivery/indefinite Quantity (idiq) / Multiple Award Construction Contract (macc) Program At Hurlburt Field Fl. No Solicitation Is Being Issued At This Time. This Is Not A Request For Proposal (rfp) Or Invitation For Bid (ifb) And Shall Not Be Construed As A Commitment By The Government To Issue A Solicitation Or Ultimately Award A Contract. The Air Force Will Not Be Responsible For Any Costs Incurred By Interested Parties In Responding To This Notice. Any Future Solicitation, Including Specifications And/or Drawings, Will Be Made Available On The System For Award Management Website (https://www.sam.gov/). Interested Parties Are Solely Responsible For Monitoring The Aforementioned Website For The Release Of A Solicitation Package And/or Any Updates/amendments. Oral Submissions Of Information Will Not Be Considered In Response To This Sources Sought. If The Government Decides To Pursue A Solicitation, Portions Of Your Responses To This Sources Sought May Be Incorporated Into The Final Solicitation. Respondents Are Discouraged From Submitting Any Information Deemed Competition-sensitive Or Proprietary. hurlburt Field, Fl Has A Need For A Multiple Award Construction Contract (macc) To Provide Indefinite Delivery/indefinite Quantity (idiq) Heating, Ventilation And Air Conditioning (hvac) Construction Efforts To Support The 1st Special Operations Contracting Squadron (1 Socons) And 1st Special Operations Civil Engineering Squadron (1 Soces) Mission. The Contractor Shall Furnish All Personnel, Equipment, Tools, Materials, Supervision, And Other Items And Services Necessary To Manage, And Accomplish A Broad Range Of Hvac Repair, Alteration, And/or Replacement Work On Various Real Property Facilities On Hurlburt Field. Projects Shall Consist Of Tasks In A Variety Of Trades To Include Demolition, Site Work, Electrical, Mechanical, And Other Specialty And General Contracting Work Required For Hvac Systems. the Work To Be Performed Under The Macc Will Be Within The North American Industry Classification System (naics) Code 238220- Plumbing, Heating, And Air-conditioning. Description Of The Work Will Be Identified In Each Individual Task Order. The Government Anticipates An Award Of Up To Five (5) Contracts. this Acquisition Is Being Considered As A Total Small Business Set-aside And Servicing The North Florida District Office (sba Office Code 0491) And Florida Okaloosa County Area. all Interested Parties Are Invited To Respond And Prospective Contractors Must Be Registered In The System For Award Management (sam) Database At Https://www.sam.gov/ Before Award Of A Government Contract; Failure To Register In The Sam Database Will Cause Your Firm To Be Ineligible For Any Future Award. to Assist The Government In Developing A Potential Acquisition Strategy, Please Provide The Following Information: 1. General Informaton: a. Company Name, Address, Point Of Contact, Voice And Fax Telephone Numbers And E-mail Address. b. Type Of Business, (i.e., Small, 8a, Woman-owned, Hub Zone, Serviced-disabled Veteran-owned Small Business, Large Business, Etc.). c. Under Which Naics Code Does Your Company Usually Provide The Aforementioned Requirements. d. Please Describe Any Customary Commercial Contract Terms Or Conditions That You Feel Would Make Any Resulting Contract More Effective If Applicable. 2. Capabilities: The Air Force Is Seeking Qualified, Experienced Sources Interested In Meeting The Requirements Detailed Above. Please Address The Following Regarding Your Capabilities In Meeting The Requirements Contained In The Attached Documents: a. Is Your Company Capable Of Meeting This Requirement? If So, Please Provide Product Information Sufficient To Determine Your Company’s Capability (specifications, Past Performance Info., Brochures, Etc.) 3. Responses: E-mail Responses To This Source Sought To The Points Of Contact Identified Below. The Due Date And Time For Responses To This Sources Sought Is At 12:00 Pm Cst On 21 Nov 2024. Please Email Responses To Contract Specialists: Mr. Romeo Reyes; Romeo.reyes.1@us.af.mil, And Ssgt Micha Hough; Micha.hough@us.af.mil And Mr. Richard Beaty (contracting Officer) @ Richard.beaty.3@us.af.mil.

Description: Work For This Project Requires The Contractor To Be Responsible For For Furnishing And Supplying All Labor, materials, Equipment, Utilities, Miscellaneous Items, Freight And Delivery And All necessary Valid Licenses For The Work Summarized In The Sow: 1. Furnish And Install 480v, 3 Ph, 30a Feeder From Existing Panelboard To Proposed aeration Equipment Disconnect. 2. Furnish And Install 480v, 3ph, 30a Disconnect, Including Grounding System, Post, pipe Bollards, And Conduits. 3. Furnish And Install Microbubble Lagoon Aeration System Consisting Of The following: a. Control Panel With Individual Motor Overload Protection Circuit Breakers. b. Self-contained Floating Microbubble Aerators Cord Connected To Control Panel with Tethers And Anchors (4 Each). 4. Locate Private And Utility Owned Buried Electrical Lines In The Area Of Work And provide Location On As-built Plans With Reference Measurements To Existing infrastructure. 5. Furnish Third-party Inspection Of Electrical Work Included In This Contract. the Magnitude Of This Project Is Between $25,000.00 And $100,000.00 this Pre-solicitation Notice Seeks To Provide Information To Interested Parties About Potential Opportunity To Perform The Construction, Additions, Alterations, Or Maintenance And Repairs As Described Above. This Pre-solicitation Notice Does Not Commit The Government To Contract For Any Supply Or Service. Respondents Are Advised That The United States (u.s) Government Will Not Pay For Any Information Or Administrative Cost Incurred In Response To This Pre-solicitation Notice. All Costs Associated With Responding To This Pre-solicitation Notice Will Be Solely At The Responding Party's Expense. Please Be Advised That All Submissions Become Government Property And Will Not Be Returned. Responses To This Notice Are Not Offers And Cannot Be Accepted By The U.s Government To Form A Binding Contract. the Solicitation Will Be On Or About 20th November, No Additional Information Is Known At This Time.

Details: Multiple-award Contract Indefinite-delivery Indefinite-quantity (mac Idiq) For Discrete Production, Non-discrete Production And Other Production Work To Support The Navy?s Four Public Shipyards In Accomplishing Repair, Maintenance, And Modernization Of Nuclear-powered Attack Submarines. The Specific Requirements Will Be Defined At The Delivery Order Level, And Will Encompass Efforts Such As Preservation, Structural/non-destructive Testing, Shipboard Work, Electrical Services, Component Repair, And Engineering Support. Efforts Include Performing Drydock Submarine Repair, Maintenance And Alterations At Norfolk Naval Shipyard (nnsy), Puget Sound Naval Shipyard (psns), Pearl Harbor Naval Shipyard (phnsy), And Portsmouth Naval Shipyard (pnsy), And Performing The Repair And Restoration Of Select Critical Components. Offerors Are Not Required To Have Their Own Drydock. Work Would Be Performed Under Delivery Orders Anticipated To Be Competed Among Mac Idiq Awardees Over A Five-year Base Ordering Period With Three Additional Option Years. The Navy Will Include Rolling Admissions Provisions Enabling The Navy To Annually Announce An Interim Competition For The Purposes Of Adding Additional Contractors To The Mac Idiq.the Navy Has Categorized The Requirements To Be Procured Under The Mac Idiq Into Two Tiers: Critical (lot 1) And Non-critical (lot 2), As Defined As Follows:critical (lot 1) Requirements Consist Of Efforts That Involve Critical Systems. Due To The Nature Of Critical Systems Onboard The Submarine And The Likelihood That Delays In Completing Work Associated With These Systems Will Have A Significant Impact On The Overall Cno Availability Schedule, The Navy Will Require Contractors To Possess Capability And Capacity To Meet Technical Requirements For Critical Systems To Be Eligible For Lot 1 Scope. To Complete This Work, Awardees Are Expected To Have The Knowledge, Skills, And Experience Necessary To Complete Multiple Concurrent Complex Cno Availabilities On Critical Systems. Critical Systems Include But Are Not Necessarily Limited To The Following (all Systems Listed Imply Areas Of The System And Equipment Requiring Work Certifications That Are Not Subject To Special Emphasis Program Controls (e.g., Submarine Safety Program (subsafe), Fly By Wire (fbw), Deep Submergence Systems (dss)): Vertical Launch System (vls) Ship Control System Components Torpedo Tubes Bow Planes Sonar Dome Large Vertical Array Shipboard Hydraulics Systems Normal Fuel Oil Tank And Systems Lube Oil Systems. The Navy Intends To Issue Critical (lot 1) Efforts Under A Full And Open Competition.non-critical (lot 2) Requirements Consist Of Efforts That Do Not Involve Critical Systems But May Include Systems And Equipment Requiring Work Certifications. Lot 2 Scope Is Expected To Require Fewer Specialized Contractor Capabilities, Both In Terms Of Personnel And Equipment. The Navy Intends To Issue Non-critical (lot 2) Efforts Under A Small Business Set-aside.

Description: Custom Bid For Services - Electrical Renovation Work In Subassembly Hangers Of Lca Htt Aircraft

Description: Tariff Notice- For Minor Electrical Materials And Other Electrical Repair Work (3rd Time).

Description: Tariff Notice- For Minor Electrical Materials And Other Electrical Repair Work (3rd Time).

Details: Future Tenders (operations Engineering - Dukhan) Turnaround Maintenance Services At Fah&pwi Stns And Fsp Tender Description: Section A: Tturnaround Maintenance Services For Fahahil (south, North & Main) Stations And Pwi 2,4,7,8 Stations - 2026. Section B: Turnaround Maintenance Services For Fahahil Stripping Plant - 2026. The Scope Of Services Includes Decontamination Of Plants, Inspection Of Static Equipment, Internal Coating, Overhauling/testing Of Valves And Other Associated Instrument, Piping Works, Insulation Works, Electrical Works, Civil Works, Provision Of Equipment And Manpower And Commissioning & Start-up Of The Plants. Planned Tender Issue: 16/01/25 Planned Contract Award: 03/07/25