Electrical Tenders

Details: **** Attention: The Industry Day Has Already Occured **** the Us Army Corps Of Engineers, Caribbean District, Is Hosting An Industry Day For The Upcoming Solicitation For Rio Puerto Nuevo Flood Control Project, Supplemental Contract 3, San Juan, Puerto Rico. This Is Not A Solicitation For Proposals And No Contract Shall Be Awarded From This Notice. logistics date: 5 December 2024 location: centro De Emprendimiento | San Juan 159 Calle Carlos F Chardon, San Juan, 00918, Puerto Rico time: registration On-site: 8:00am, Ast seminar And Q&a Session: 8:30am – 10:30am, Ast one-on-one Discussions With Potential Solicitors (30-minute Time Slots): 10:30am – 12:00pm, Ast event Details seminar an Informative Presentation Will Be Provided With Detailed Information For The Upcoming Solicitation For Rio Puerto Nuevo Flood Control Project, Supplemental Contract 3, San Juan, Puerto Rico. The Focus Will Be On Scope Of Work, Design Information, Construction Considerations, Acquisition Timeline, And Contracting Requirements. one-on-one Discussions: “one-on-one" Discussions With Usace Personnel Will Be Offered In 30-minute Time Slots From 10:30am - 12:00pm On A First Come-first Served Basis, But Emphasis Should Be Placed On The Interest And Appropriateness Of Acquisition Approach And Procedures For Rio Puerto Nuevo Flood Control Project, Supplemental Contract 3 As Opposed To General Capabilities. Attendees Are Encouraged To Rsvp For Both The Event And One-on-one Discussions, If Interested, At Earliest Convenience To Secure A Time Slot, But Registration Will Be Accepted On Site Prior To The Start Of Discussions. Attendees Are Also Encouraged To Submit Questions In Advance To Allow Us To Focus On Areas Of Particular Interest, But Active And Open Discussion Will Be Encouraged Throughout. agenda: To Be Posted. presentation: To Be Posted. instructions To Participants in Order To Prepare A List Of Attendees Of Individuals Participating In This Industry Day, It Is Requested That An E-mail Be Sent To Jaclyn Yocum, Jaclyn.c.yocum@usace.army.mil No Later Than (nlt) December 2, 2024 At 5:00 Pm, Ast. Please Title The Email: “rsvp To Industry Day For Rio Puerto Nuevo Flood Control Project, Supplemental Contract 3, San Juan, Puerto Rico.” in Your Email, Please Include The Following Information: firm’s Name. name And Title Of Those Individuals Participating. contact Number And E-mail Address. specify Type Of Business, Small Business Category (if Any), Uei Information And If You Would Like To Participate As A Prime Or Subcontractor. specify If Your Company, If You Are Seeking A One-on-one Breakout Session For Rio Puerto Nuevo Flood Control Project, Supplemental Contract 3, San Juan, Puerto Rico (note: A Response Will Be Provided To You With The Reserved Time Slot And Room Number). request For Information questions: The Government Will Address Questions The Day Of And After The Event. Attendees Will Be Given The Opportunity To Submit Written Questions During The Presentation; Index Cards Will Be Provided. After The Industry Day, All Questions Must Be Submitted Through Projnet (see Instructions Below). all Questions And Official/approved Answers Will Be Posted On The Sam.gov Website. instructions For Submitting Questions questions Relating To This Webinar And Future Projects Are To Be Submitted Via Bidder Inquiry In Projnet At (https://www.projnet.org). To Submit And Review Inquiry Items, Participants Will Need To Use The Bidder Inquiry Key Presented Below And Follow The Instructions Listed Below The Key For Access. A Participant Who Submits A Comment /question Will Receive An Acknowledgement Of Their Comment/question Via Email, Followed By An Answer To The Comment/question After It Has Been Processed By Our Technical Team. all Timely Questions And Official/approved Answers Will Be Made Available Through Projnet. Official/approved Answers To All Timely Questions Will Also Be Posted On The Sam.gov Website In The Form Of A Report Generated From Projnet When All Answers Are Finalized. We Appreciate Your Questions And Feedback By 5:00 Pm, Ast On December 13, 2024. note: Please Indicate The Name Of The Project When Submitting Your Questions. rio Puerto Nuevo Supplemental Contract 3 – Bidder Inquiry Key: I7w97w-uh6xgs specific Instructions For Projnet Bid Inquiry Access From Projnet Home Page: 1. Identify The Agency. This Should Be Marked As Usace. 2. Email. Enter The Email Address You Would Like To Use For Communication. 3. Key. Enter The Bidder Inquiry Key Listed Above. 4. Click Continue. A Page Will Then Open Saying That A User Account Was Not Found And Will Ask You To Create One Using The Provided Form. 5. Enter Your First Name, Last Name, Company, City, State, Phone, Email, Secret Question, Secret Answer, And Time Zone. Make Sure To Remember Your Secret Question And Answer As They Will Be Used From This Point On To Access The Projnet System. 6. Click Add User. Once This Is Completed You Are Now Registered Within Projnet And Are Currently Logged Into The System. specific Instructions For Future Projnet Bid Inquiry Access From Projnet Home Page: 1. For Future Access To Projnet, You Will Not Be Emailed Any Type Of Password. You Will Utilize Your Secret Question And Secret Answer To Log In. 2. Identify The Agency. This Should Be Marked As Usace. 3. Email. Enter The Email Address You Used To Register Previously In Projnet. 4. Key. Enter The Bidder Inquiry Key Listed Above. 5. Click Continue. A Page Will Then Open Asking You To Enter The Answer To Your Secret Question. 6. Enter Your Secret Answer And Click Login. Once This Is Completed You Are Now Logged Into The System. contract Scope rio Puerto Nuevo Flood Control Project, Supplemental Contract 3: Channel Bottom And Wall Improvements, San Juan, Puerto Rico the Work For The Rio Puerto Nuevo Supplemental Contract 3 Includes The Widening And Deepening Of The Existing Channel For Flood Control Purposes By Constructing Two Drilled Shaft Walls And Dredging To The Required Depth. Each Wall Is Approximately 5200 Feet Long With Exposed Heights Ranging From 24 Feet To 31 Feet And Will Be Tied Together With A Cap Beam. Construction Of The Walls Will Require Temporary Sheet Piling To Maintain A Minimum Flow Area For Flood Events. This Contract Also Includes A Tie-in Structure At The Josefina Confluence, A Transition The Existing River Upstream, And A Transition To An Existing Project At The Downstream Outlet. Other Work Includes Sanitary Sewer, Water, And Electrical Utility Relocations, As Well As Implementation Of New Stormwater Inlets For Drainage Across The Wall Into The Channel. naics Code: 237990 - Other Heavy And Civil Engineering Construction With A Small Business Size Standard Of $45mil. order Of Magnitude (dfar 236.204): Between $250,000,000 And $500,000,000. point Of Contact (poc): Jaclyn Yocum, Jaclyn.c.yocum@usace.army.mil. Please Note That All Questions Relating To This Webinar And Future Projects Are To Be Submitted Via Bidder Inquiry In Projnet At Https://www.projnet.org. update November 22, 2024: The Draft Plans And Specifications Have Been Provided With This Announcement. These Plans And Specifications Supersede Any Drafts Previously Made Available. Note: Rpn_cnt3_draft_specs_vol_1of3.pdf Is Assigned As The Sf1442 - Section "00" Of The Solicitation And Will Not Be Made Available Until The Official Solicitation Package Is Advertised.see The Attachments/links Section Of This Announcement To Download These Documents. update December 3, 2024: The Bidder Inquiry Has Been Extended And Will Close 5:00 Pm, Ast On December 13, 2024 To Accomidate Submission Of Questions After The Industry Day And The Draft Plans And Specifications. update December 10, 2024: The Power Point Presentation Slides And Attendees List For The Industry Day That Was Held On December 5, 2024 Has Been Uploaded To This Announcement. See The Attachments/links Section Of This Announcement To Download These Documents.

Details: Description 1. The Department Of Agrarian Reform (dar), Catanduanes Provincial Office Through The Cy-2025 National Expenditure Program (nep) Intends To Apply The Sum Of One Million Six Hundred Seventy & 00/100 (php 1,670,000.00) Being The Abc To Payments Under The Contract For Cy-2025 Procurement Of Farm Machineries & Equipments (mechanical Flat Bed Dryer) For Rice Production Through Crfpsp – Crfps Project For Baparco – Batong Paloway, San Andres, Catanduanes (darcat-pb-epa2025-015). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Item No. Fme Price /unit Total Price 1 1 Unit – Mechanical Flat Bed Dryer Php 1,670,000.00 Php 1,670,000.00 Specifications: Furnace: • Direct Fired Made Refractory Bricks Or Its Equivalent • Able To Resist Heat Of At Least 800 Celsius • Gravity Type Feeding Mechanism • Multi Fuel Capacity Which Uses Biomass As Fuel Including Cracked Pili Nut Shell, Corn Hub & Rice Hull Blower And Engine: • Axial Blower Driven By At Least 14 Hp Diesel Engine, Single Cylinder • Water Cooled; Manual/hand Cracked Starting • Dynamically Balanced With Appropriate Bearings And Shafting With Belt. Concrete Flooring: • Concrete Flooring/slab • Class A Mixture With At Least 100 Mm Thick • 10 Mm Rsb Reinforcement Spaced At 80 Cm. Drying Bin: • Made Of Reinforced Concrete Walling With A Minimum Of 100 Mm Thickness • 8 Mm Rsb Reinforcement Spaced At Minimum Of 150 Mm • Inside Dimension Of Bin: Width=12 Ft, Length=24 Ft. • Total Bin Height= 1500 Mm • Height Of Plenum= 1040 Mm • Holding Depth Of 450 Mm With Gauge 18 Perforated Metal Floor Having At Least • 2.54 Mm Perforation With Complete Bagging Ports (at Least 4) • Adequately Supported With Frames And Braces To Withstand 6 Tons Rice Or Corn. • Equipped With Heavy Duty Dial And Probe Type Thermometer Range Of 0-100 C Shed: • Stand-alone Type Shed • Roofing Sheets Made Of Brand New Pre-painted Corrugated Sheet With 0.25 Mm Thk. • Roofing Sheets Shall Be Connected To The Steel Purlins By Using Self-tapping Roof Metal Screws(tekscrew) • Steel Columns With Total Of Ten (10) Columns To Cover The Concrete Flooring • Angle Bar For Trusses With 2 Pcs-75mm X 50 Mm X 6.5mm & C-channel Purlins With 75mm X 75mm X 6.5mm Agitator: • Chain Driven W/ 60-60 Chain & Sprocket • Powered By 5.5 Hp Air-cooled Gasoline Engine Package Inclusion: • 1 Unit Grain Moisture Meter Specs: 1. Measurement Range: 5-40% Moisture Content (mc) 2. Accuracy: ±0.5% Mc (in The Range Of 5-25% Mc) 3. Repeatability: ±0.2% Mc 4. Grain Temperature Range: -20°c To 80°c (-4°f To 176°f) 5. Sample Size: 100-500 Grams (3.5-17.6 Oz) 6. Measurement Method: Electrical Resistance 7. Display: Digital Lcd Display With Backlight 8. Units: % Mc 9. Power Supply: 220v Ac 10. Dimensions: Approximately 200x150x50 Mm (7.9x5.9x2 Inches) 11. Weight: Approximately 1-2 Kg (2.2-4.4 Lbs) Inclusions: • With Amtec Test Result • Conform To Paes 119-2001 & Paes 301:2020 • Warranty Duration:1 Year Warranty Of Whole Unit. • With Request Authority To Bid • Available In The Philippine Market W/ Attached Evidence & Must Have Service Center Within Region 5.with Approved Test From Manufacturer; With Reflectorized Sticker Printed With Dar Logo (3x3 Inches) & The Words “department Of Agrarian Reform -crfpsp Project” (2x12 Inches); Inclusive Of Field Testing, Demo On Operations & Maintenance, And On-site Delivery. • On Site Delivery; At Batong Paloway, San Andres, Catanduanes • Delivery Period: 60 Days Upon Receipt Of Notice To Proceed Total Abc: Php 1,670,000.00 Vat Inclusive 2. The Department Of Agrarian Reform (dar), Catanduanes Provincial Office Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By A Period Sixty (60) Days. Bidders Should Have Completed, Within At Least Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Department Of Agrarian Reform (dar), Catanduanes Provincial Office And Inspect The Bidding Documents At The Address Given Below During Regular Office Hours (8:00 Am To 5:00 Pm), Mondays Thru Fridays, Valid For The Duration That This Particular Bidding Activity Is Open From December 19, 2024 – January 7, 2025 Until 12:00 Noon. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 19, 2024 – January 7, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented In Person, By Mail, Or Through Electronic Means. 6. The Department Of Agrarian Reform, Catanduanes Provincial Office Will Hold A Pre-bid Conference For This Particular Procurement On December 26, 2024, Thursday, 9:00 Am At Dar Catanduanes Provincial Office, Constantino (pob.), Virac, Catanduanes. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, (ii) Online Or Electronic Submission As Indicated Below, Or (iii) Both On Or Before January 7, 2025 Tuesday, Until 12:00 Noon. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 7, 2025 Tuesday, 1:00 Pm At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agrarian Reform (dar), Catanduanes Provincial Office, Through The Provincial Bids & Awards Committee (bac) Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Ms. Ma. Katrina M. Sarausa Arpo I /head Bac Secretariat Department Of Agrarian Reform (dar) Catanduanes Provincial Office Brgy. Constantino (pob.), Virac, Catanduanes Cellphone Hotline: 09634442986 Email Address: Bacsec.catan@gmail.com 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website For Online Bid Submission: Bacsec.catan@gmail.com 18 December 2024 Atty. Cherry A. Agmata Bac Chairperson

Details: Sources Sought Response Form ellsworth Afb B-21 West Alert Apron Epss sources Sought Notice # W9128f25sm007 anticipated Solicitation # W9128f25r0033 purpose: By Way Of This Sources Sought Notice, The Usace-omaha District Intends To Determine The Extent Of Capable Small Business Or Other Than Small Business Firms That Are Engaged In Providing The Requirement Described Hereunder. The Responses To This Notice Will Be Used For Planning Purposes For Upcoming Procurements. Therefore, This Notice Does Not Constitute A Request For Proposal (rfp), Quotation Or Bid; It Does Not Guarantee The Future Issue Of An Rfq/rfp/ifb; Nor Does It Commit The Government To Contract For Any Supply, Service, Or Construction. There Is No Solicitation Currently Available. further, This Agency Will Not Accept Unsolicited Proposals. Respondents Are Advised That This Agency Will Not Pay For Any Information Or Administrative Cost Incurred In Response To This Notice. All Costs Associated With Responding To This Notice Will Be Solely At The Responding Party's Expense. At This Time, Proprietary Information Is Not Being Requested, And Respondents Shall Refrain From Providing Proprietary Information In Response To This Sources Sought Notice. project Description: this Upcoming Solicitation Will Be Executed Using A Design-bid-build (dbb) Project Delivery Method, Which Will Require The Contractor To Provide The Government With A Complete Facility And Warranty Based On The Request For Proposal (rfp). this Project Will Provide Seven (7) New Pre-engineered Metal Environmental Protection Shelters (epss), Approximately 20,000 Sf Each. This Project Is Located Directly Adjacent To And Required To Coordinate With The Fy25 East Alert Apron Eps Project, With Target Award In Fy25. epss Are Sized To Fit The B-2a “spirit” Aircraft With Space To Perform General Aircraft Maintenance. The Project Also Includes Associated Airfield And Ground Support Equipment (gse) Paving. Supporting Facilities Include Two (2) Maintenance Kiosks, Approximately 160 Sf Each, Providing Electrical And Communication Infrastructure To The Epss. Additional Site Features Include Blast Deflectors, Pl-3 Boundary Fencing And Lighting, And An Entry Control Point (ecp). This Project Will Include A Space Or Spaces Constructed To Afi 16-1404 Requirements. facilities Will Be Designed As Permanent Construction In Accordance With The Dod Unified Facilities Criteria (ufc) 1-200-01, General Building Requirements And Ufc 1-200-02, High Performance And Sustainable Building Requirements. Each Facility Must Be Compatible With Applicable Dod, Air Force, Aircraft, And Base Design Standards. In Addition, Sustainable (green) Construction Materials And Techniques Shall Be Used Where Cost Effective And/or Where Specified. This Project Will Comply With Dod Antiterrorism/force Protection Requirements Per Unified Facilities Criteria. special Construction And Functional Requirements: The Project Will Be Constructed On / Near The Existing Alert Apron At Eafb. As Such, The Project Will Be Constructed Adjacent To – And May Be Required To Integrate With Active Airfield Operations. It Will Also Be Constructed Adjacent To Other Active B-21 Facility Construction Sites. Demolition Of Existing Facilities, Utilities, And Infrastructure – To Include Hazardous Materials Contaminated Apron And Soils May Be Required. New Airfield Apron Will Be Designed In Compliance With Ufc 3-260-02 And Will Be Constructed In Compliance With Ufgs 32 13 14.13. small Businesses Are Reminded Under Far 52.219-14(c) (1), Limitations On Subcontracting Services. At Least 50 Percent Of The Cost Of Contract Performance Incurred For Personnel Shall Be Expended For Employees Of The Concern. Prior Government Contract Work Is Not Required For Submitting A Response To This Sources Sought Synopsis. (for Construction): Project Period Of Performance: 800 Calendar Days From Construction Ntp. responses: Please Respond To All Information Requested In This Notice Not Later Than 2:00 Pm Cst 03-jan-2025. Please Include The Sources Sought Notice Identification Number In The Subject Line Of The Email Submission With Attention To: James.r.willett@usace.army.mil And Courtesy Copy Brittany.c.gull@usace.army.mil. required Information To Be Submitted In Response To This Notice: company Name, Address, Phone Number, Point Of Contract, Email, Web Address: cage Code And Unique Entity Identifier (uei): north American Industry Classification System Code (naics): state Whether Your Firm Is Classified By The Small Business Administration As Any Of The Following: small Business small Disadvantaged Business service-disabled Veteran Owned Small Business (sdvosb) section 8(a) women Owned Small Business (wosb) hubzone historically Black Colleges And Universities/minority Institutions none Of The Above is Your Company Currently Registered In System For Award Management (sam)? has Your Company Performed Work For The Federal Government Under A Different Name Or Uei/duns #, Or As A Member Of A Joint Venture (jv)? If Yes, Provide An Explanation: capabilities And Submission Requirements: submission Details: all Interested, Capable, Qualified, And Responsive Contractors Under Naics Code 236220 Are Encouraged To Reply To This Request. Interested Prime Contractors Only Should Submit A Narrative Demonstrating Their Experience In Construction Projects Of Similar Nature As Described In The Project Description. Responses Are Requested Only From: Potential Prime Construction Contractors With Company Bonding Capability (single Job) Of At Least $50m. Narratives Shall Be No Longer Than 12 Pages. Email Responses Are Required. please Include The Following Information In Your Response/narrative: •company Name, Address, And Point Of Contact, With Phone Number And Email Address •cage Code And Duns/eid Number •business Size To Include Any Official Teaming Arrangements As A Partnership Or Joint Venture •details Of Similar Projects And State Whether You Were The Prime Or Subcontractor •start And End Dates Of Construction Work •project References (including Owner With Phone Number And Email Address) •project Cost, Term, And Complexity Of Job •information On Your Bonding Capability - Specifically Identify Capacity Of Performance And Payment Bonds in Accordance With Dfars 236.204, The Magnitude Of This Project Is Expected To Range Between $25m And $100m. details On Similar Projects With Scope And Complexity Should Identify Experience With The Following Within The Past 10 Years: •construction Of Similar Clear-span Type Covered Storage Or Maintenance Facility (large Pre-engineered Metal Building Systems, Large Vehicle Storage, Large Bay Facility, Etc.) •construction Of Airfield Paving In Compliance With Ufc 3-260-02 Or Associated Unified Federal Guide Specifications. •construction Of Facilities To The Afi 16-1404 Or Equivalent Standards. •construction Of Facilities Designed To Resist Vibroacoustic Impacts Associated With Aircraft (or Other) Engine Runup And Taxiing. •construction Of Aircraft Blast Deflectors Or Equivalent Feature. •construction Of Facilities On A Dod Military Installation. •construction Of Facilities On An Active Airfield Flightline. •construction Of Facilities With Shared Access, Laydown, And Limits Of Work To Adjacent Projects Awarded Under Separate Contract. responses Will Be Shared With Government Personnel And The Project Management Team On A Need-to-know Basis, But Otherwise Will Be Held In Strict Confidence. project Labor Agreement: project Labor Agreements (plas) Are Currently Required For Large-scale Construction Projects, Unless An Exception Is Determined To Apply To The Project. Large-scale Construction Projects Are Defined As Construction Projects With Estimated Costs Expected To Exceed $35m. If An Exception Does Not Apply, A Pla Will Be Required From All Offerors With Submission Of Their Initial Proposal. The Pla Will Be Evaluated On An Acceptable/unacceptable Basis. Submitted Plas Will Be Reviewed For Compliance With All Statutes, Regulations, Executive Orders, And Agency/ Contract Requirements. Offerors Are Encouraged To Review 22.504, General Requirements For Project Labor Agreements. comments: provide Comments Or Identify Any Concerns Your Company Has Regarding The Planned Solicitation. Note That The Government Will Not Be Responding To Inquiries About The Proposed Solicitation At This Time. Your Responses And Comments Will Be Used By Government Personnel To Assess The Viability And Scope Of The Proposed Solicitation And Will Be Kept In Strictest Confidence. Telephone Inquiries Will Not Be Accepted. estimated Construction Contract Award Will Be Second Quarter Of Fiscal Year 2026 (fy26).

Details: The Purpose Of This Sources Sought Notice Is To Conduct Market Research And Identify Potential Sources Of Commercial Products/services That Satisfy The Government’s Anticipated Needs. background the National Institute Of Standards And Technology (nist), Sources And Detectors Group (https://www.nist.gov/pml/applied-physics-division/sources-and-detectors) In The Physical Measurement Laboratory Performs Precision Radiometry Across The Electromagnetic Spectrum. We Develop Novel, Built-for-purpose Detectors, Some Of Which Must Operate Under Ultra-high Vacuum (uhv) Conditions. Therefore, It Is Necessary To Assess New Detector Materials For Their Uhv Compatibility. Our Lab Seeks A Uhv Sample Bakeout Chamber That Can Be Used To Assess Material Outgassing During Heating. nist Is Seeking Information From Sources That May Be Capable Of Providing A Commercial Solution That Will Achieve The Objectives Described Above, In Addition To The Following Essential Requirements: physical Requirements: base Pressure: 1e-8 Torr partial Pressure For Masses >44 Amu: <5e-11 Torr integrated Turbo Pump System With Roughing Pump, Vent Valve, Ion Pressure Gauge, Controller And Cable, Power Supply, Gate Valve To Bakeout Chamber nitrogen Backfill Capability With Pressure Relief Valve achieve Base Pressure In 24 Hours bakeout Chamber Either 12” Cube Or 12” Diameter Sphere (minimum) With Minimum Of Six (6) Conflat Ports one (1) Conflat Viewport Minimum 600 Cf, Necessary Blank-off Flanges, Gaskets, And Hardware minimum One (1) 2-3/4” Conflat Flange one (1) Sample Holder (minimum) With Infrared Heater Able To Hold 3” Diameter (or Larger) Sample. Holder Mounted On A Cf Flange infrared Heater Able To Achieve Temperatures Of At Least 300 Degrees C. temperature Control System For Sample, Including, For Example, Temperature Controller W/software, Cables, Appropriate Electrical Feedthroughs, Temperature Sensor, Etc. wheeled Support Stand 120 V (operate From Nema 5-20r Outlet) cad Drawings Of Assembled Chamber And Stand all User Manuals For Electronics And Components how To Respond To This Notice in Responding To This Notice, Please Do Not Provide Proprietary Information. Please Include Only The Following Information, Readable In Either Microsoft Word 365, Microsoft Excel 365, Or .pdf Format, In The Response: Submit The Response By Email To The Primary Point Of Contact And, If Specified, To The Secondary Point Of Contact Listed In This Notice As Soon As Possible, And Preferably Before The Closing Date And Time Of This Notice. Please Note That To Be Considered For Award Under Any Official Solicitation, The Entity Must Be Registered And “active” In Sam At The Time Of Solicitation Response. provide The Complete Name Of Your Company, Address, Name Of Contact For Follow-up Questions, Their Email, Their Phone Number And, If Your Company Has An Active Registration In Https://sam.gov, Your Company’s Unique Entity Id (uei). identify The Equipment That Your Company Sells That Can Meet The Objectives Addressed In The Background Section Of This Notice. For Each Product Recommended To Meet The Government’s Requirement, Provide The Following: manufacturer Name model Number technical Specifications if Your Company Is Not The Manufacturer, Provide Information On Your Company’s Status As An Authorized Reseller Of The Product(s) describe Performance Capabilities Of The Product(s) Your Company Recommends To Meet The Government’s Requirements. Additionally, If There Are Other Features Or Functions That You Believe Would Assist Nist In Meeting Its Objectives Described Above, Please Discuss In Your Response. discuss Whether The Equipment That Your Company Sells And Which You Describe In Your Response To This Notice May Be Customized To Specifications And Indicate Any Limits To Customization. identify Any Aspects Of The Nist Market Research Notice, Including Instructions, And Draft Minimum Specifications In The Background Section You Cannot Meet And State Why. Please Offer Suggestions For How The Market Research Notice And Draft Minimum Specifications Could Be Made More Competitive. state Whether The Proposed Equipment Is Manufactured In The United States And, If Not, State The Name Of The Country Where The Equipment Is Manufactured. identify Any Plans/possibilities For Changes In Manufacturing Location Of The Aforementioned Equipment And Provide Relevant Details, Including Timeline. for The Naics Code Listed In This Notice: indicate Whether Your Company Is (a) A Small Business Or (b) Other Than Small Business. See The Table Of Small Business Size Standards And The Associated .pdf Download File For Small Business Size Standards And Additional Information. if You Believe The Naics Code Listed In This Notice Is Not The Best Naics Code For The Type Of Product Addressed In This Notice, Identify An Alternative Naics Code That You Believe Would Be More Appropriate For The Planned Procurement. describe Services That Are Available With The Purchase Of The Aforementioned Equipment From Your Company Such As Installation, Training, And Equipment Maintenance. describe Standard Terms And Conditions Of Sale Offered By Your Company For The Recommended Equipment Such As: Delivery Time After Your Company Accepts The Order; Fob Shipping Terms; Manufacturer Warranty (including Details Regarding Nature And Duration); If Available, Description(s) Of Available Extended Warranty; Equipment Setup And Test; Operator And Service Instruction Manual(s); Cleanup After Installation; And If Applicable, Other Offered Services. Provide A Copy Of Manufacturer Standard Terms And Conditions That Typically Relate To The Sale Of The Specified Equipment, If Available. state Whether Your Company Offers Facility Renovation Services Related To Installation Of The Recommended Equipment At Its Delivery Destination, If Required Per The Nist-identified Minimum Specifications, And Provide Description Of Said Services. Indicate If Your Company Performs The Facility Renovation Services Or Typically Subcontracts The Work To Another Company. Indicate If Your Company Would Be Interested In Inspecting The Intended Installation Site During The Market Research Phase. state Published Price, Discount, Or Rebate Arrangements For Recommended Equipment And/or Provide Link To Access Company’s Published Prices For Equipment And Services. if The Recommended Equipment And Related Services Are Available For Purchase On Any Existing Federal Supply Schedule Contract(s) Or Other Contracts Against Which Nist May Be Able To Place Orders, Identify The Contract Number(s) And Other Relevant Information. identify Any Customers In The Public Or Private Sectors To Which You Provided The Recommended Or Similar Equipment. Include Customer(s) Information: Company Name, Phone Number, Point Of Contact, Email Address. provide Any Other Information That You Believe Would Be Valuable For Nist To Know As Part Of Its Market Research For This Requirement. state If You Require Nist To Provide Additional Information To Improve Your Understanding Of The Government’s Requirement And/or Would Like To Meet With Nist Representatives To Discuss The Requirement And The Capabilities Of The Identified Equipment. questions Regarding This Notice questions Regarding This Notice May Be Submitted Via Email To The Primary Point Of Contact And The Secondary Point Of Contact Listed In This Notice. Questions Should Be Submitted So That They Are Received 5 Days Prior To The Response Date. If The Contracting Officer Determines That Providing A Written Amendment To This Notice To Document Question(s) Received Would Benefit Other Potential Respondents, The Questions Would Be Anonymized, And A Written Response To Such Question(s) Would Be Provided Via An Amendment To This Notice. important Notes this Notice Is For Market Research Purposes And Should Not Be Construed As A Commitment By Nist To Issue A Solicitation Or Ultimately Award A Contract. There Is No Solicitation Available At This Time. this Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. nist Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization’s Capability. respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. after A Review Of The Responses Received, A Synopsis And Solicitation May Be Published On Gsa’s Ebuy Or Sam.gov. However, Responses To This Notice Will Not Be Considered An Adequate Response To Any Such Solicitation(s). thank You For Taking The Time To Submit A Response To This Request!

Details: Description Tesda Viii-tti-op-06-f02 Rev. No. 00 – 03/18/2024 Request For Quotation Date: Rfq No.: 2025 – 01 – 0018 Pr No: 2025 – 01 - 0018 Name Of Business/ Company: Address: Tax Identification No.: Philgeps Registration No.: The Balicuatro College Of Arts And Trades, Through Its Procurement Unit, Intends To Procure Materials, Tools And Equipment For Registration Of Mechatronics Servicing Nc-iii, Which Will Be Undertaken In Accordance With Section 53.9 (small Value Of Procurement) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. Please Quote Your Best Offer For The Item/s Described Herein Subject To The Terms And Conditions Provided In The Last Page Of This Rfq. Submit Your Quotation Duly Signed By You Or Your Duly Authorized Representative Not Later Than __________, 2025 At 2:00pm Through Email At Tesdabcatsupply17@gmail.com. Interested Suppliers Are Required To Submit Copies Of The Following As Per Annex “h” Of The 2016 Revised Irr Of Republic Act No. 9184 Along With Your Quotation/proposal: A) Philgeps Registration Number B) Mayor’s/business Permit C) Income/business Tax Return (for Abc Above P500k) D) Omnibus Sworn Statement (for Abc Above P50k) Open Quotations May Be Submitted Manually At The Tesda-bcat Campus, Magallanes St., Sabang Ll, Allen Northern Samar Or Email At Tesdabcatsuppy17@gmail.com In Pdf Format. For Further Queries, You May Contact Us At Telephone No. 09275821039 Or Email Address At Bcat2016@tesda.gov.ph Daryl P. Lim Administrative Officer Iv Head, Finance And Administrative Unit   Tesda Viii-tti-op-06-f03 Rev. No. 00 – 03/18/2024 Price Quotation Form Date: __________________ Balicuatro College Of Arts And Trades Magallanes St. Sabang Zone 2 Allen Northern Samar Bcat2016@tesda.gov.ph Sir/madam: After Having Carefully Read And Accepted The Terms And Conditions, I/we Submit Our Quotation/s For The Item/s As Follows: No. Item/technical Specifications Qty. Unit Approved Budget For The Contract (in Peso) Offer Compliance With The Technical Specifications (please Check) Price Offer Remarks Yes No 1. 1 Long-nosed Pliers 6" 10 ₱931.00 ₱9,310.00 [ ] [ ] 2. 2 Diagonal Cutters 6" 10 ₱931.00 ₱9,310.00 [ ] [ ] 3. 3 Standard Screw Driver 6" 10 ₱517.00 ₱5,170.00 [ ] [ ] 4. 4 Phillip Screw Driver Set 6" 10 ₱517.00 ₱5,170.00 [ ] [ ] 5. 5 Electrical Pliers 6" 10 ₱931.00 ₱9,310.00 [ ] [ ] 6. Soldering Iron Set 10 ₱931.00 ₱9,310.00 [ ] [ ] 7. Adjustable Wrench 6" 10 ₱931.00 ₱9,310.00 [ ] [ ] 8. Wire Stripper 5 ₱1,035.00 ₱5,175.00 [ ] [ ] 9. Crimping Tool 5 ₱1,759.00 ₱8,795.00 [ ] [ ] 10. Allen Wrench 7pcs, 2.5-10mm 5 ₱1,035.00 ₱5,175.00 [ ] [ ] 11. Precision Screwdrivers 5 ₱724.00 ₱3,620.00 [ ] [ ] 12. Multimeters (auto-range High Precision True Rms Digital Multimeter) 10 ₱3,105.00 ₱31,050.00 [ ] [ ] 13. Air Compressor (silent) Working Pressure: Up To 160 Psi 1 ₱20,700.00 ₱20,700.00 [ ] [ ] 14. Transmitter Or Transducer 3 ₱5,175.00 ₱15,525.00 [ ] [ ] 15. Regulated Dc Power Supplies 5 ₱6,555.00 ₱32,775.00 [ ] [ ] 16. Cylinder Actuator (single-acting) 5 ₱6,325.00 ₱31,625.00 [ ] [ ] 17. Cylinder Actuator (double-acting) 5 ₱6,990.00 ₱34,950.00 [ ] [ ] 18. Buzzers 10 ₱414.00 ₱4,140.00 [ ] [ ] 19. Industrial Panel Switch 25 ₱414.00 ₱10,350.00 [ ] [ ] 20. Indicating Lamps 10 ₱172.00 ₱1,720.00 [ ] [ ] 21. Directional Solenoid Valves (fittings:6mm) (3/2 Way , 4/2 Way Or 5/2 Way) 10 ₱1,984.00 ₱19,840.00 [ ] [ ] 22. Pressure Guage 5 ₱1,035.00 ₱5,175.00 [ ] [ ] 23. Filter-regulated-lubricator Set 5 ₱9,315.00 ₱46,575.00 [ ] [ ] 24. Limit Switches 5 ₱431.00 ₱2,155.00 [ ] [ ] 25. Photoelelectic Switches 10 ₱2,070.00 ₱20,700.00 [ ] [ ] 26. Proximity Switches 10 ₱1,035.00 ₱10,350.00 [ ] [ ] 27. Relays 25 ₱1,035.00 ₱25,875.00 [ ] [ ] 28. Magnetic Contactors 10 ₱2,070.00 ₱20,700.00 [ ] [ ] 29. Timers 10 ₱5,175.00 ₱51,750.00 [ ] [ ] 30. Counters 10 ₱6,210.00 ₱62,100.00 [ ] [ ] 31. Laptop (w/ Graphics Card Gtx Or Rtx, 512gb Ssd And 16gb Ram) (w/ Ethernet Port) 10 ₱35,707.00 ₱357,070.00 [ ] [ ] 32. Safety Helmet 5 ₱724.00 ₱3,620.00 [ ] [ ] 33. Safety Harness 5 ₱1,035.00 ₱5,175.00 [ ] [ ] 34. Safety Glasses/googles 5 ₱1,035.00 ₱5,175.00 [ ] [ ] 35. Earplugs/earmuffs 5 ₱517.00 ₱2,585.00 [ ] [ ] 36. Gas Mask 5 ₱724.00 ₱3,620.00 [ ] [ ] 37. Face Shield 5 ₱724.00 ₱3,620.00 [ ] [ ] 38. 20 I/o`s Plc 2 ₱19,142.00 ₱38,284.00 [ ] [ ] 39. Solder Lead (core Flux) 1 ₱1,035.00 ₱1,035.00 [ ] [ ] 40. Shielded Cable 1 ₱2,070.00 ₱2,070.00 [ ] [ ] 41. Terminal Lugs 1 ₱2,070.00 ₱2,070.00 [ ] [ ] 42. Terminal Strips/blocks 1 ₱2,070.00 ₱2,070.00 [ ] [ ] 43. Cotton Gloves 25 ₱207.00 ₱5,175.00 [ ] [ ] 44. Plastic Tubing 1 ₱6,210.00 ₱6,210.00 [ ] [ ] 45. Quick-connect Fittings 1 ₱4,140.00 ₱4,140.00 [ ] [ ] 46. Electric Tape 10 ₱103.00 ₱1,030.00 [ ] [ ] 47. Wire Markers 1 ₱4,140.00 ₱4,140.00 [ ] [ ] 48. Cable Ties (3x 100mm) 1 ₱310.00 ₱310.00 [ ] [ ]   Terms And Conditions 1. Bidders Shall Provide Correct And Accurate Information Required In This Form. 2. Bidders May Quote For Any Or All Of The Items. 3. Price Quotation/s Must Be Valid For A Period Of Thirty (30) Calendar Days From The Date Of Submission. 4. Price Quotation/s, To Be Denominated By Philippine Peso Shall Include All Taxes, Duties, And Or Levies Payable. 5. Quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. 6. Award Of Contract Shall Be Made To The Lowest Quotation Which Complies With The Technical Specifications, And Other Terms And Conditions Stated Herein. 7. Any Interlineations, Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By You Or Any Of Your Duly Authorized Representative/s. 8. The Item/s Shall Be Delivered According To The Requirements In The Technical Specifications. 9. Tesda Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Technical Specifications. 10. Liquidated Damages Equivalent To One Tenth Of One Percent (0.001) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. Tesda Shall Rescind The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. Name Of Business/company Signature Over Printed Name Office Telephone/fax No. Mobile No. Email Address

Details: Description "invitation For Negotiated Procurement For Two-failed Biddings" Rfq No. Np/pb 24-p-308 Date December 17, 2024 Pr Reference 100-23-04-042 Philgeps Reference No. 11606314 End - User Ceo Closing Date January 3, 2025 @5:00 P.m. Bid Opening January 7, 2025 @9:00 A.m. Designated Places Of Submission (bid Box Designated Locations) 1. Bac Office, Cabcabon, Bayawan City 2. Public Market Office, Bayawan City 3. Sidlakan Extension Office (dgte. City) Note: Please Attach The Following Documentary Requirements Together With This Rfq: 1. Mayor's / Business Permit 2. Philgeps Registration No: A. Philgeps Red Membership (for Svp, Shopping, Highly Technical Consultants ) B. Certificate Of Philgeps Registration (platinum Membership) (np- Two Failed Bidding) 3. Omnibus Sworn Statement Name Of Business: Address: Name Of Store: Business Permit No.: Tax Identification No.: Philgeps Reg. No.: The Local Government Unit Of Bayawan City, Through Its Bids And Awards Committee, Intends To Procure Goods/services As Enumerated In The Proposal Form. Please Submit Your Quotations/proposals Duly Signed By You Or Your Duly Authorized Representative Not Later Than The Closing Date For The Item(s) Described, Subject To The Terms And Conditions Provided At The Back Portion Of This Request For Quotation (rfq). Quotations May Be Submitted Manually, Or Through Facsimile Or Email At The Address And Contact Numbers Indicated Below. For Any Clarification, Please Contact The Bac Secretariat At Telephone Number (035) 430-0281 Local 1210/1212 Or Email Address At Bac.bayawan@gmail.com. Virginia D. Sadiasa Bac Chairperson Acknowledgement Receipt I/we Hereby Acknowledge Receipt Of This Request For Quotation (rfq), And Hereby Agree To The Terms And Conditions Set Therein. We Assume Responsibility To Deliver/submit Our Proposal On Or Before The Closing Date And Time At The Designated Bid Boxes; Otherwise, Lgu Bayawan City Can Consider Us Not Interested To Quote. (signature Over Printed Name / Date) Terms And Conditions 1. Bidders Shall Provide Correct And Accurate Information Required In This Form. Errors In Price Quotation Shall Be Exclusively The Supplier’s Responsibility. Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initiated By You Or Any Of Your Duly Authorized Representative/s. 2. Price Quotation/s, To Be Denominated In Philippine Peso Shall Include All Taxes, Duties, And/or Levies Payable. All Prices Offered Must Be Valid For A Period Of Thirty (30) Calendar Days From The Date Of Submission. 3. Quotations Exceeding The Approved Budget For The Contract (abc) Shall Be Rejected. 4. Indicate In The Proposal The Brand, Model And Technical Specifications Of The Items Quoted; Otherwise, The Bid Will Be Rejected. Specifying The Country Of Origin, The Terms “generic”, “original”, And The Like Are Not Considered Brand Names. Indicate No Brand If The Item Quoted Is Generally Unbranded. 5. Alternative Bids Shall Be Rejected Outright. For This Purpose, Alternative Bid Is An Offer Made By A Bidder In Addition Or As A Substitute To Its Original Bid Which May Be Included As Part Of Its Original Bid Or Submitted Separately Therewith For Purposes Of Bidding. A Bid With Options Is Considered An Alternative Bid Regardless Of Whether Said Bid Proposal Is Contained In A Single Envelope Or Submitted In Two (2) Or More Separate Bid Envelopes. 6. Award Will Be Made To The Lowest Calculated And Responsive Bid (lcrb) – The Bid Determined, After Post-qualification, As Complying To The Eligibility And Bid Requirements. 7. Basis Of Evaluation For This Rfq: By Lot Per Item 8. Breaking Of Ties. A Non-discretionary Method Of Breaking Ties Will Be Used, I.e. Tossing Of Coin (for Two Bidders) Or Draw Lots (for Three Or More Bidders). 9. The City Of Bayawan Reserves The Right Not To Award Any Contract To A Bidder Having A Pending And Overdue Delivery Obligation To The City And Defaulted The Prescribed Delivery Period In Previous Award/s From The City Of Bayawan. 10. The Prescribed Delivery Period Is Within Thirty (30) Calendar Days, Unless Explicitly Indicated In The Proposal. Extension Of Delivery Period, If Granted, Shall In No Case Exceed The Original Delivery Term. Unless Otherwise Stated, The Default Place Of Delivery Is F.o.b. Bayawan City Warehouse, Cabcabon, Bayawan City. 11. Supplier/s Must Deliver The Items Awarded Within The Period Specified In The Purchase Order. Purchase Order Issued Shall Automatically Be Cancelled If No Delivery Is Made After Thirty (30) Calendar Days After Receipt Thereof, Without Prejudice To Legal Courses Of Action (e.g. Imposition Of Liquidated Damages, Suspension And Blacklisting) Provided In Republic Act 9184 And Its Irr. The Rescinded Contract May Be Re-awarded To The Next Lowest Calculated And Responsive Bidder. 12. Warranty. To Assure That Manufacturing Defects Are Corrected By Supplier, A Warranty Security Shall Be Required For A Minimum Of Three (3) Months For Expendable Supplies, And One (1) Year In The Case Of Non-expendable Supplies. The Obligation Shall Be Covered By Retention Money(1%) Of The Contract Price And Shall Be Released Only After The Lapse Of The Warranty Period Or In The Case Of Expendable Supplies, After Consumption Thereof: Provided, However, That The Supplies Delivered Are Free From Patent And Latent Defects And All The Conditions Imposed Under The Contract Have Been Fully Met. Rfq Proposal Form Rfq Reference: Np/pb 24-p-308 Total Abc: Php 153,944.00 After Having Carefully Read And Accepted The Terms And Conditions, I/ We Submit Our Quotation For The Item(s) As Follows: Item No. Description (qty) Unit Of Issue Approved Budget For The Contract (unit Cost Per Line Item) Offer Compliance With Technical Specifications (please Check) Remarks (indicate The Price, Brand, Model And Specifications. Attach Brochure If Available) Yes No Unit Cost Total Cost Brand/model And Technical Specifications Iv. 1 Lot Door 12 Labor And Materials - Awning Type Window Glass, Width: 0.60m X Heigth: 0.60m, 1 Panel With U Bars Hinge, 1/4", Tempered Glass Bronze, Aluminum Frame (analok), With Complete Accessories 4 Set/s 7,469.00 [ ] [ ] 14 Glass Door, Single Swing, H=2.10m X W=.813m, Aluminum Frame, Analok, 6mm Thk. Tempered Glass Bronze W/ Complete Access. (labor And Materials) 3 Set/s 7,253.40 [ ] [ ] 15 Labor And Materials - Double Swing Glass Door, (push And Pull), With 1 3/4" X 4" Open Back And Rectangular Tube With Snap-on Base/cover Framing, Aluminum Frame (analok), 1/4" Tempered Glass Bronzse, 1.813 X 2.10m, With Complete Accessories 2 Set/s 37,191.00 [ ] [ ] V. 1 Lot Tile Materials 17 Tiles, Wall, Ceramic, 20cm X 20cm, Glazed, Cream 700 Pc/s 28.00 [ ] [ ] Vi. 1 Lot Plumbing Pipes And Fittings 24 Marine Epoxy (lit) 1 Lit/s 238.00 [ ] [ ] Vii. 1 Lot Plumbing Pipes And Fittings 28 Kitchen Sink, Stainless With Complete Accessories, 0.45m X 0.45m 1 Set/s 1,400.00 [ ] [ ] Ix. 1 Lot Electrical Materials 44 Luminaire Fixture, Luminaire W/ Reflector, Surface Type, 2 X 36w, W/ Led Tube And Complete Accessories 17 Set/s 393.40 [ ] [ ] * Nothing Follows* Purpose: Delivery Of Materials/supplies For The Construction Of Barangay Multi Purpose Hall (phase Ii), Cansumalig, 2nd Revision (supplier Must Provide Complete Data For The Information Required Below) Delivery Period Warranty Place Of Delivery Signature Over Printed Name Designation Name Of Business Address Telephone/mobile/fax No Email Address

Details: Description 1. The Municipality Of Consolacion, Through The General Fund Intends To Apply The Sum Of Two Million Five Hundred Thousand Pesos (p 2,500,000.00) Being The Abc To Payments Under The Contract For Procurement Of Props, Materials And Lights For Sinulog Festival 2025. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipality Of Consolacion Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 5cd. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non- Discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. The Awarding Of The Contract To The Winning Bidder Will Take Place When The Funds Are Available (short Of Award). 5. Prospective Bidders May Obtain Further Information From The Bac Office Of The Municipality Of Consolacion And Inspect The Bidding Documents At The Address Given Below During Mondays To Fridays From 8:00am To 5:00pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 6, 2024 To January 2, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (p 5,000.00). 7. The Municipality Of Consolacion Will Hold A Pre-bid Conference On December 16, 2024 At 3:00 O’clock In The Afternoon At The Bac Office Located At The 4th Floor, Municipal Building, Poblacion Oriental, Consolacion, Cebu, Which Shall Be Open To Prospective Bidders. 8. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before 10:00 O’clock In Morning, January 2, 2025. Late Bids Shall Not Be Accepted. 9. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 10. Bid Opening Shall Be On January 2, 2025 At 10:00 O’clock In Morning At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 11. The Municipality Of Consolacion Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Jakhelene C. Tubin Bac Office 4th Floor, Municipal Building Poblacion Oriental, Consolacion, Cebu 268-3736/232-0392 Consolacionbac@gmail.com 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: A. Lguconsolacion.gov.ph Or B. Philgeps Website Atty. Paolo Crispino C. Sucalit Bac Chairperson 888 Greco (super Glue) 9 Box Acrylic Emulsion 10 Gal Adjustable Wrench Small 6 Pc Airbrush 1 Pc Airfoam 50 Pc Angle Bar 1/4 X 1 1/2 60 Pc Angle Bar 3/16 X 1 1/4 60 Pc Canvass Cloth 100meters / Roll 1 Roll Clear Gloss 6 Gal Colored Latex 1/4 - Burnt Sienna 40 Can Colored Latex 1/4 - Hansa Yellow 40 Can Colored Latex 1/4 - Lamp Black 40 Can Colored Latex 1/4 - Raw Sienna 40 Can Colored Latex 1/4 - Thalo Blue 40 Can Colored Latex 1/4 - Thalo Green 40 Can Colored Latex 1/4 - Tolondine Red 40 Can Colored Latex 1/4 - Venetian Red 40 Can Common Nail 1 1/2 8 Kilo Common Nail 2 1/2 8 Kilo Compressor Hose #1/4 80 Meter Cutoff Disc 10 Box Cutter Blade Nt Japan (big) 20 Pc Cutter Blade Nt Japan (small) 20 Pc Cutter Blade Refill (big) 20 Box Cutter Blade Refill (slanting) 20 Box Cutting Disc (25pcs. / Box) 10 Box Electric Rod Holder 300a 3 Pc Electrical Tape (3m, Black) 10 Pc Eterna Brush (assorted) 25 Pc Expanding Foam Spray 20 Pc Extension Wire #20 70 Meter Female Plug 6 Pc Festival Trimmings 20 Roll G.i Pipe #1 (s40) 30 Pc G.i Pipe #1 1/2 (s40) 30 Pc Glue Gun (heavy Duty) 10 Pc Glue Stick 3000 Pc Good Lumber 1x2x8 40 Pc Gun Tacker (heavy Duty) 2 Pc Hacksaw Blade 16 Pc Hammer Small 10 Pc Insulator Foam 10mm (plain) 2 Roll Insulator Foam 5mm (plain) 2 Roll Insulator Foam With Silver 1 Roll Lacquer Thinner 6 Gal Latex Flat White 8 Pail Lucban #3mm 70 Pc Lucban #6mm 70 Pc Madrigal Gold 2 Roll Male Plug 5 Pc Masking Tape #1 20 Roll Non-sag Epoxy 2 Gal Nylon #90 3 Kilo Organza Cloth 1 Roll Paint Brush 15 Pc Paint Tray 8 Pc Peacock Powder 10 Can Pencil 2 6 Box Permanent Marker (red) 9 Box Philip Screwdriver 5 Pc Plug (heavy Duty) 6 Pc Plywood Marine 1/4 60 Pc Plywood Marine 3/4 20 Pc Pvc #4 5 Pc Roller Brush 10 Pc Royal Cord #16/2c (50 Meters / Roll) 2 Roll Rubber White 4mm 41 Pc Rugby Greco 50 Gal Scissor 10 Pc Velvet Cloth (100m/roll) 1 Roll Sequence Cloth (gold) (100m/roll) 2 Rolls Sequence Cloth (white) (100m/roll) 1 Roll Skim Coat 2 Sack Socket Outlet (3 Gang) 4 Pc Spray Gun K3 (lotus) 7 Pc Steel Bar 10mm 55 Pc Steel Bar 12mm 40 Pc Steel Bar 9mm 65 Pc Steel Caster Wheel #4 (heavy Duty) 250 Pc Steel Caster Wheel #5 (heavy Duty) 240 Pc Styro Foam #4 50 Pc Tecs Screw #1 1/2 (1,000 Pcs/box) 7 Box Tecs Screw #3/4 (1,000 Pcs/box) 7 Box Tie Wire #16 16 Kilo Unihard Foam #2 55 Pc Urethane Paint White 5 Gal Urethane Thinner 5 Gal Welding Gloves 10 Pair Welding Rod (6013, 2.5mm) - 10kg/box 10 Box Lights Controller 12v Receiver 22 Set 2.4g Sender 2 Set 12v Ic Chips 105 Unit Segmental Software 2 Set Battery Aa (2pcs/pack) - Heavy Duty 500 Pack

Purchaser Name: Turkish Electrical Communications A S General Directorate Of The 18th Regional Directorate Of ADANA | Operation of 18 units of 154 Kv and 4 units of 400 Kv Transformer Centers in 32 Sections tmi̇-4/186-7-8-9 Group for a Period of 5 Months and 15 Days

Purchaser Name: Turkish Electrical Communications A S General Directorate Of The 18th Regional Directorate Of ADANA | 154 Kv 1272 Mcm (104 Km) West Adana Gi̇s (cable pole) -new martyrs' cemetery Tm Ėh Facility Construction Work

Details: The purpose of the contract is to provide maintenance services for the National Archives of the World of Work (ANMT) building. These services include electrical maintenance, SSI, HVAC, climate engineering, structural work, finishing work, coordination, rodent control, pigeon control, automatic doors and gates. They include the presence of a technician on site 5 days a week, inspection rounds and a 24-hour on-call service.