Electrical Tenders

Details: Description Specifications: 1lot 32 Stages Purification System 6000gpd, 1lot Stainless Skid, 1lot Electrical Accessories, 1lot Materials With Fittings, 2units Stainless Tank 1000 Liters, 1unit Brine Tank 80 Liters, Warranty On Machine And Workmanship: 1year Warranty On Service Only, Free Ocular Inspection (initial And Final) 6months Warranty On Motor, Free Assistance Consultation Business Start Up, Free Training For The Employees( (actual Training), Laboratory Test Prior To Turn Over (microtest), Inclusion: 32 Stages Purification System, Ppr Pipes And Fittings, Freebies: 50pcs Gallon Slim/round, 2500pcs Assorted Seals, 1pc Heat Gun, 1pc Gallon Of Liquid Soap, 1 Sack Of Solar, Al Water Meter (iwas Kupit) Free Delivery

Details: Framework For The Provision Of Supply And Install Of 11kv Switch Gear-the University Of Birmingham Has A Requirement For A Framework For The Provision Of The Supply And Install Of High Voltage 11kv Switch Gear In Various Substations On Campus. The University Intends To Appoint A Single Framework Operator To Deliver This Requirement.at The Discretion Of The University Of Birmingham There May Be A Requirement To Replace Main And Sub Distribution Lv Panels, Circuit Protective Devices And Reconnect The Existing Circuits Back Into The New Switchgear. Testing Of The Circuits And Protection Works, Shall Form Part Of This Framework. Any Civils Work Or Cable Replacement Required For The New Switch Gear Shall Also Form Part Of This Works. The Successful Contractor/ Supplier Shall Be Responsible For Removal Of The Old Switch Gear, The Installation And Commissioning Of The New Switchgear In Its Entirety. The Selection Of The Switchgear Shall Comply With The University Of Birmingham Estates Electrical Specification, And Or The Requirements Of Estates Infrastructure

Details: Description The Municipality Of Calintaan, Through The 20% Development Fund Intends To Apply The Sum Of One Million Five Hundred Thousand Pesos Only (php1,500,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Small Scale Production Facility In So. Tuburan, Brgy. Iriron With Contract Number 2024-12-226. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Municipality Of Calintaan Now Invites Bids For Construction Of Small Scale Production Facility In So. Tuburan, Brgy. Iriron Composed Of Total Floor Area = 96 Sq. M. Construction Of 8.0m X 12.0m Warehouse With Electrical Installation. Completion Of The Works Is Required In Ninety (90) Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders).

Description: This Is A Sources Sought Notice Only. This Is Not A Request For Proposals And No Contract Shall Be Awarded Based On This Notice. There Is No Bid Package Or Solicitation Document Associated With This Announcement. Response To This Sources Sought Is Strictly Voluntary And Will Not Affect Any Company Ability To Submit An Offer If A Solicitation Is Released. Any Requests For A Solicitation Package Will Be Disregarded. The Government Does Not Intend To Award A Contract Based On This Sources Sought Or Otherwise Pay For The Information Solicited. No Entitlement To Payment Of Direct Or Indirect Costs Or Charges By The Government Will Arise Because Of Preparing Submissions In Response To This Sources Sought And The Government Use Of Such Information. Submittals Will Not Be Returned To The Sender. Respondents To This Sources Sought May Be Asked To Provide Additional Information/details Based On Their Initial Submittals. The Mission And Installation Contracting Command, Fort Mccoy, Wisconsin Is Conducting Market Research To Determine The Availability And Capability Of Companies For The Project Listed Below. Project 1. Region 4 (entire State Of California, Multiple Locations) Matoc Idiq, $25,000,000 Max Value, Solicitation Number: W911sa25ra010 Synopsis: The General Scope Of This Upcoming Requirement Is To Provide All Management, Personnel, Materials, Equipment, Supplies, And Transportation Needed To Execute Tasks For A Variety Of Trades Such As Carpentry, Roofing, Painting, Electrical, Hvac, Plumbing, Masonry, Demolition, Roadwork, Storm Drainage, Earthwork, Welding, And Other General Construction. Projects Awarded Utilizing The Matoc Will Possibly Stem From Completed Designs, Partial Designs, Or As Specified And Will Be Accompanied By A Statement Of Work (sow). Dpw Projects Include Design-build Projects. All Anticipated Projects Demand High Standards Of Quality And Performance. All Work Performed Shall Be In Accordance With The Industrial And Commercial Codes/standards. The Capabilities Required For This Acquisition Will Be Of The Following General Project Categories: (1) Construction, Repair And Alteration Of Various Facilities, (2) Minor Construction And Real Property Maintenance, Remodel, And Repair To Include But Not Limited To The Following: Foundation And Site Work, Concrete Construction, Masonry Construction, Metals, Carpentry, Thermal/moisture Protection, Earthwork, Curtain Walls, Doors, Windows, Glass, Finished Materials, Fencing Communications, Elevators/conveying Systems, Mechanical/ Electrical, Demolition And Removal, Roads/ Paving, And Painting. Potential Sources Shall Be Capable Of Furnishing All Labor, Materials, Facilities And Equipment Required To Accomplish The Work. The Type Of Set-aside Will Depend In Part To The Responses Of This Sources Sought. We Encourage All Small Businesses, In All Socioeconomic Categories (including, 8(a) Business Development Program, Small Disadvantaged Business, Historically Underutilized Business Zone, Service-disabled Veteran-owned, Women-owned Small Business Concerns), To Identify Their Capabilities And Socio-economic Category In Meeting The Requirement At A Fair Market Price. If A Solicitation Is Released, It Will Be Synopsized On The Government-wide Point Of Entry. It Is The Responsibility Of Potential Off Errors To Monitor The Government-wide Point Of Entry For Additional Information Pertaining To This Requirement. Any Work To Be Performed Will Be Done As Firm Fixed Price Within The North American Industry Classification System (naics) Code 236220, With A Small Business Size Standard Of $45.0 Million For This Project. Responses To This Announcement Must Be Received No Later Than 12:00pm Cst 03 January 2025. Responses Shall Be Emailed To William.a.parsons4.civ@army.mil. Responses Shall Include The Following:1) Solicitation Number In The Subject Line Of The Email 2) Company Name And Point Of Contact Information To Include Name, E-mail, Address, Telephone, And Fax Numbers. 3) Sam Unique Id Number. 4) Size Of The Business (small Or Large) And The Socioeconomic Status Of The Company (i.e. Hubzone, 8(a), Etc.) 5) A Written Narrative Of The Contractor Capability To Provide The Requirements Listed Above To Include Examples Of Similar Work Performed In The Past. 6) Address Specifically If Your Firm Can Meet The Completion Date Based On The Information Given. Please Do Not Call To State Your Interest, Emails Are Printed And Filed Electronically To Document Interest In This Project. Thank You.

Details: The Naval Special Warfare Command (nsw) Group 1 Is Requesting Information To Identify Sources Capable Of Providing Skills Trade Course Of Instructions (coi) Trades Certifications For Carpentry, Hvac, Electrical, Plumbing, Welding, And Small Engine Utilizing Industries Tools And Equipment. this Is A Request For Information (rfi) Notice With The Overall Objective Of Conducting Market Research In Support Of Preliminary Planning For The Potential Acquisition Of Skills Trade Course Of Instructions (coi) Trades Certifications For Carpentry, Hvac, Electrical, Plumbing, Welding, And Small Engine Utilizing Industries Tools And Equipment. This Rfi Seeks To Provide Industry And Interested Parties With Information That Will Assist In The Understanding Of Current Technical Requirements For Potential Skills Trade Course Of Instructions (coi) Trades Certifications For Carpentry, Hvac, Electrical, Plumbing, Welding, And Small Engine Utilizing Industries Tools And Equipment. See Attached Document For Additional Information And Submission Instructions. respondents To This Rfi Must Adhere To The Following Details: submissions Shall Be Double Spaced, Typed Or Printed In Times New Roman Font With Type No Smaller Than 12-point Font. submissions Shall Not Exceed Ten (10) Pages. Course Descriptions, Class Schedules, Facilities, Etc. any Text Contained Within Tables, Graphs, Etc. Should Be 8-point Times New Roman Font Or Larger. included Files Should Be Created/prepared Using Microsoft Office 2010 Compatible Applications. Graphics, Photographs, And Other Data That May Not Be Compatible With Microsoft Office 2010 Should Be Submitted In Portable Document Format (pdf) Format. submitted Electronic Files Should Be Limited To The Following Extensions: .docx Microsoft Word .xlsx Microsoft Excel .pptx Microsoft Powerpoint .pdf Adobe Acrobat this Rfi Is Issued For Informational And Planning Purposes Only And Is Not To Be Construed As A Commitment By The Government To Issue A Solicitation Or To Award A Contract. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. As Such, The Government Will Not Reimburse Any Costs Associated With Responding To This Notice. Any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization's Qualifications To Meet The Requirement. Any Information Submitted By Respondents Is Strictly Voluntary. Respondents Should Properly Mark Its Responses With The Appropriate Restrictive Markings. Information That Is Proprietary Or Competition-sensitive May Be Protected From Disclosure Under The Public Records Law Only If Properly Labeled As Such. The Government May Choose Not To Respond To Specific Questions Or Comments Submitted In Response To This Rfi Notice Or Information Provided As A Result Of This Rfi. Respondents Will Not Be Notified Of The Results Of This Notice. The Information Obtained From Submitted Responses May Be Used In The Development Of An Acquisition Strategy And Future Solicitation. If A Solicitation Is Issued, It Will Be Announced Separately On Sam.gov And All Interested Parties Must Respond To That Solicitation Separately From The Response To This Rfi. Submission Of A Response To This Notice Does Not Constitute A Request To Be Added To A Bidders List Or To Receive A Copy Of A Solicitation. submissions Shall Be Submitted Electronically To Emily.lonigro@socom.mil. Email Is The Only Acceptable Method Of Submission. No Facsimile Quotes Will Be Accepted. Submission Through The Sam System Is Not Permitted.

Details: The Direct Current (dc) Generator Is Used To Generate The Electrical Power Required For 28-volt Aircraft Electrical Systems. It Is Cataloged Under Three Separate Nsns (6115-00-901-1818, 6115-00-725-1790, And 6115-00-942-2094). 6115-00-901-1818, Which Is The Master Nsn, Is Not Repaired And There Are No Assets Linked To It Due To It Being An Administrative Nsn. 6115-00-942-2094 And 6115-00-725-1790 Are Actively Used And Associated With Tracking Inventory And Repairing Assets. This Specific Repair/overhaul Requirement Will Be Referencing This Item Using Nsn-2094. This Dc Generator Is A Commercial Item (far Part 12) And Is Not Unique To The Military. the Current Repair Method Code (rmc) For This Item Is "1", Thus Indicating That It Is Suitable For Competitive Repair For The Second Or Subsequent Time. The Repair Method Suffix Code (rmsc) Is Designated As "c" And Its Official Definition States The Following: "this Part Requires Engineering Source Approval By The Design Control Activity (wr-alcmc/wiue) In Order To Maintain The Quality Of The Part. Existing Unique Engineering Skills, And Repair Knowledge By The Qualified Source(s) Require Repair Of The Part By The Approved Source(s). The Approved Source(s) Retain Repair Knowledge, Or Technical Data That Are Not Economically Available To The Government, And The Data Or Knowledge Is Essential To Maintaining The Quality Of The Part. An Alternate Source Must Qualify Iaw The Design Control Activity's Procedures, As Approved By The Cognizant Government Engineering Activity (wr-alcmc/wiue). The Qualification Procedures Must Be Approved By The Government Engineering Activity Having Jurisdiction Over The Part In The Intended Application." Only Approved Sources Will Be Considered For Award.the Contracting Action Resulting From This Solicitation Will Be A Firm-fixed-price Definite Delivery Contract With A One-year Basic Ordering Period, Followed By Four One-year Ordering Periods. The Required Turn-around-time Shall Be 45 Calendar Days After Receipt Of Order, Or Receipt Of Reparable Assets, Whichever Is Later. The Delivery Destination Will Be Robins Air Force Base, Georgia, 31098.

Details: Description Terms And Conditions: Requires Three (3) Professional Engineers: 1 Professional Mechanical Engineer 1 Professional Electrical Engineer 1 Professional Electronics Engineer 1. The Services Cost Is Associated With Ensuring That Designs And Solutions Meet The Necessary Industry Codes, Standards, And Regulations. This Ensures The Engineer's Work Complies With Legal, Safety, And Environmental Requirements 2. Professional Engineers Are Responsible For Reviewing, Approving, And Signing Off On The Final Plans And Specifications, Confirming That They Reflect Their Expertise And Are Suitable For Construction Or Implementation 3. Engineers Must Collaborate With Other Professionals Such As Architects, Contractors, Or Consultants, To Ensure The Design Integrates Smoothly With Other Project Elements 4. Professional Engineers Are Accountable For Ensuring That Plans, Specifications, And Designs Are Technically Sound, Safe, And Legally Compliant, While Also Meeting The Needs Of The Project And Client 5. Professional Engineers Must Be A Professional Registered/ Accredited Thru Professional Regulatory Commission (prc) With Minimum 5 Years Experience As Professional Engineers

Details: Amendment #2 Attached amended Residential Building Renovation-windows & Bars Replacement And Exterior Works.this Solicitation Is Hereby Amended To Add And/or Expand The Scope-of-works To Include “external Painting Services, Add And/or Expand The Scope-of-works To Include “roofing Gutters Provision And Installation Services”, the U.s. Embassy Monrovia, Liberia Has A Requirement For The Replacement Of The Existing Aluminum Windows And Window Bars At One Of Its Residences With New Aluminum Frames, Glasses, And Steel Bars. replacement Of All Windows Include The Basement, Ground And Upper-level Floors. All The Windows Shall Maintain The Existing Dimensions Except The Kitchen Windows On The Ground Level/floor. The Three Existing Kitchen Windows Shall Be Reduced To 44” Above The Floor To Accommodate Proper Installation Of Electrical Outlets Above The Kitchen Cabinets. The Contractor Shall Provide All Equipment, Tools, Material, Labor And Supervision Required For The Professional And Successful Installation Of The Windows And Completion Of Tasks. There Shall Be On Flogging Of The Window, Window Shall Be Clear And Transparent.

Details: Description Mitsubishi Fb L300 / Shg-199 Engine Oil Oil Filter Clutch Fan Silicon Oil Combination Switch Peanut Bulb Wire With Hose Clamp Horn With Relay And Socket Alternator Assy Alternator Hose Wiper Blade Accelerator Cable Stp 6203 Bearing Coolant Pms Change Oil Replace Clutch Fan Replace Sliding Door Window Glass (labor&materials) Replace Steering Cover (labor&materials) Repair Steering Column Cover Repair Electrical System Replace Unseen Defective Parts Mitsubishi Fb L300 / Np-8842 (petrosolar) Alternator Assy Oil Return Hose Check And Repair Alternator Inconsistent Charge Bajaj Re 3w / Sa 10273 Motor Oil Oil Filter Tire Assy 4.00 X 8 Pms Change Oil Replace Tires Bajaj Re 3w / Sa 10276 Motor Oil Oil Filter Pms Change Oil

Details: Description 1. 1 Lot Mobilization/demobilization 2. 2 Units Project Billboard 3. 1 Lot Demolition Of Existing Building Structure (includes Chipping & Re-chipping) 4. Earthworks A. 20 M3 Excavation & Backfilling (using Usable Filling Materials) B. 50 M3 Embankment (sub-base Course) Basketball Court C. 25 M3 Gravel Bedding (basketball Court) 5. 49.28 M3 Structural Concrete 6. 1,753.57 Kgs. Reinforcing Steel Bars (basketball Court) 7. 560 Bd.ft. Forms, Staging & Scaffoldings 8. 81 M2 Ceiling Works (includes Airvent) 9. 3 Units Pre-fab. Door & Accessories 10. 17 Units Window Works 11. 19.87 M2 Tile Works & Accessories 12. 1 Lot Plumbing Works, Fixtures & Accessories 13. 1 Lot Electrical Works (conduits, Boxes & Fittings)