Electrical Tenders

Purchaser Name: Turkish Electrical Communications A.S. General Office (TEIAS) Centre | H.408 T2 Reference 380 Kv (2 Sections) (~134.5 Km) 3b 1272 Mcm Conductor Akkuyu Ngs – Seydişehir Eih After Termination Balance Works Offer Unit Price Complete Installation Work

Purchaser Name: ZAPORIZKY ELECTRICAL REPAIR PLANT PRIVATE JOINT-STOCK COMPANY | Олива Трансформаторна Т-1500

Purchaser Name: ZAPORIZKY ELECTRICAL REPAIR PLANT PRIVATE JOINT-STOCK COMPANY | Шестерня До Електровозів Серії Вл-80, Вл-82м

Description: Amc/amsc: 1g 1 Suitable For Competitive Acquisition. (see Notes 1 And 2) g The Government Has Unlimited Rights To The Technical Rights To The Technical Data, And The Data Package Is Complete. Valid Amcs: 1 And 2. drawings – item Name: Circuit Card Assembly rp001: Dla Packaging Requirements For Procurement rd002, Covered Defense Information Applies ra001: This Document Incorporates Technical And/or Quality Requirements (identified By An 'r' Or An 'i' Number) Set Forth In Full Text In The dla Master List Of Technical And Quality Requirements Found On The Web at: http://www.dla.mil/hq/acquisition/offers/eprocurement.aspx for Simplified Acquisitions, The Revision Of The Master In Effect On The solicitation Issue Date Or The Award Date Controls. For Large acquisitions, The Revision Of The Master In Effect On The Rfp Issue Date applies Unless A Solicitation Amendment Incorporates A Follow-on revision, In Which Case The Amendment Date Controls. rq009: Inspection And Acceptance At Origin rq011: Removal Of Government Identification From Non-accepted Supplies rq032: Export Control Of Technical Data this Item Has Technical Data Some Or All Of Which Is Subject To export-control Of Either The International Traffic In Arms Regulations (itar) Or The Export Administration Regulations (ear), And Cannot Be exported Without Prior Authorization From Either The Department Of State or The Department Of Commerce. Export Includes Disclosure Of Technical data To Foreign Persons And Nationals Whether Located In The United states Or Abroad. This Requirement Applies Equally To Foreign National employees And U.s. Companies And Their Foreign Subsidiaries. Dfars 252.225-7048 Is Applicable To This Data. the Defense Logistics Agency (dla) Limits Distribution Of Export-control technical Data To Dla Contractors That Have An Approved Us/canada Joint certification Program (jcp) Certification, Have Completed The introduction To Proper Handling Of Dod Export-controlled Technical Data training And The Dla Export-controlled Technical Data Questionnaire (both Are Available At The Web Address Given Below), And Have Been approved By The Dla Controlling Authority To Access The export-controlled Data. Instructions For Obtaining Access To The export-controlled Data Can Be Found At: https://www.dla.mil/logistics-operations/enhanced-validation/ to Be Eligible For Award, Offerors And Any Sources Of Supply Proposed for Use Are Required To Have An Approved Jcp Certification And Have been Approved By The Dla Controlling Authority To Access export-controlled Data Managed By Dla. Dla Will Not Delay Award In order For An Offeror Or Its Supplier To Apply For And Receive Approval by The Dla Controlling Authority To Access The Export-controlled Data. rq039: Non-tailored Higher-level Quality Requirements (sae As9100) For manufacturers And Non-manufacturers rt001: Measuring And Test Equipment part Name Assigned By Controlling Agency: Circuit Card Assembly, Phase shifter Driver Electro-static Sensitive Device mil-std-130n(1) Dated 16 Nov 2012. identification Marking Of U.s. Military Property mercury Or Mercury Containing Compounds Shall not Be Intentionally Added To<(>,<)> Or Come In Direct contact With<(>,<)> Any Hardware Or Supplies Furnished under This Contract. Exception: Functional Mercury used In Batteries, Fluorescent Lights, Required instruments; Sensors Or Controls; Weapon Systems; and Chemical Analysis Reagents Specified By Navsea. portable Fluorescent Lamps And Portable Instruments containing Mercury Shall Be Shock Proof And Contain a Second Boundary Of Containment Of The Mercury Or mercury Compound. (iaw Navsea 5100-003d). reference Control Part Number 7624570 Cage 53711 sampling: the Sampling Method Shall Be In Accordance With Mil-std-1916 Or Asq h1331, Table 1 Or A Comparable Zero Based Sampling Plan Unless Otherwise specified By The Contract. If The Applicable Drawing, Specification, standard, Or Quality Assurance Provision (qap) Specifies Critical, Major and/or Minor Attributes, They Shall Be Assigned Verificaiton Levels Of vii, Iv And Ii Or Aqls Of 0.1, 1.0 And 4.0 Respectively. Unspecified attributes Shall Be Considered As Major Unless Sampling Plans Are specified In Applicable Documents. For Mil-std-1916, The Manufacturer may Use The Attribute Or Variable Inspection Method At Their Option Or per The Contract. Mil-std-105/asq Z1.4 May Be Used To Set Sample Lot size, But Acceptance Would Be Zero Non-conformances In The Sample Lot unless Otherwise Specified In The Contract. overall Length: 5.740 Inches Nominal Overall Width: 1.619 Inches Nominal major Components: Connector Assy, Electrical (7624566-2/53711) 1; printed Wiring Board, Phase Shifter Driver, 1; No Keying Pins Special features: No Keying Pin; Model With Keying Pin Is 7624570-1. End Item identification: As-4108/spy Phased Array Antenna critical Application Item iaw Basic Drawing Nr 53711 7624570 revision Nr D Dtd 06/21/2011 part Piece Number: iaw Reference Drawing Nr 53711 7624570 revision Nr F Dtd 02/06/2009 part Piece Number: iaw Reference Drawing Nr 10001 2900594 revision Nr Ae Dtd 12/01/2014 part Piece Number: iaw Reference Drawing Nr 10001 3256939 revision Nr P Dtd 02/28/2013 part Piece Number: iaw Reference Drawing Nr 53711 7624560 revision Nr A Dtd 06/19/2013 part Piece Number: iaw Reference Drawing Nr 53711 7624561 revision Nr B Dtd 01/30/2018 part Piece Number: iaw Reference Drawing Nr 53711 7624562 revision Nr C Dtd 05/08/2019 part Piece Number: iaw Reference Drawing Nr 53711 7624563 revision Nr L Dtd 03/10/2017 part Piece Number: iaw Reference Drawing Nr 53711 7624565 revision Nr Dtd 09/22/2005 part Piece Number: iaw Reference Drawing Nr 53711 7624566 revision Nr G Dtd 02/21/2020 part Piece Number: iaw Reference Drawing Nr 53711 7624567 revision Nr A Dtd 01/15/2007 part Piece Number: iaw Reference Drawing Nr 53711 7624569 revision Nr C Dtd 08/19/2009 part Piece Number: iaw Reference Drawing Nr 53711 7624573 revision Nr D Dtd 10/17/2023 part Piece Number: iaw Reference Drawing Nr 53711 7624574 revision Nr B Dtd 09/07/2011 part Piece Number: iaw Reference Drawing Nr 53711 7624575 revision Nr C Dtd 06/25/2020 part Piece Number: iaw Reference Drawing Nr 53711 7624576 revision Nr D Dtd 11/07/2018 part Piece Number: iaw Reference Drawing Nr 53711 7624578 revision Nr A Dtd 05/15/2013 part Piece Number: iaw Reference Drawing Nr 53711 7624581 revision Nr Dtd 05/13/2004 part Piece Number: iaw Reference Drawing Nr 53711 7624583 revision Nr A Dtd 07/11/2016 part Piece Number: iaw Reference Drawing Nr 53711 7624590 revision Nr A Dtd 02/13/2018 part Piece Number: iaw Reference Drawing Nr 53711 7624591 revision Nr B Dtd 05/23/2017 part Piece Number: iaw Reference Drawing Nr 53711 7624592 revision Nr A Dtd 06/30/2008 part Piece Number: iaw Reference Drawing Nr 53711 7624593 revision Nr C Dtd 05/10/2018 part Piece Number: iaw Reference Drawing Nr 53711 7624596 revision Nr B Dtd 06/28/2013 part Piece Number: iaw Reference Drawing Nr 53711 7624597 revision Nr A Dtd 06/13/2006 part Piece Number: iaw Reference Drawing Nr 53711 7624598 revision Nr C Dtd 05/14/2020 part Piece Number: iaw Reference Drawing Nr 53711 7624599 revision Nr B Dtd 09/07/2011 part Piece Number: iaw Reference Drawing Nr 53711 7624600 revision Nr C Dtd 01/10/2018 part Piece Number: iaw Reference Drawing Nr 53711 7624602 revision Nr C Dtd 01/10/2013 part Piece Number: iaw Reference Drawing Nr 53711 7624603 revision Nr C Dtd 07/01/2010 part Piece Number: iaw Reference Drawing Nr 53711 7624604 revision Nr A Dtd 01/10/2013 part Piece Number: iaw Reference Drawing Nr 53711 7624605 revision Nr Dtd 09/22/2005 part Piece Number: iaw Reference Drawing Nr 53711 8306492 revision Nr B Dtd 08/21/2020 part Piece Number: iaw Reference Drawing Nr 10001 Ws10288 revision Nr Ab Dtd 04/05/2001 part Piece Number: iaw Reference Drawing Nr 10001 Ws10298 revision Nr Dtd 06/29/1983 part Piece Number: please Review The Nsn Listed Above And Provide Any Sources That May Be Able To Manufacture These Items. The Approved Sources For This Nsn Are Currently Listed Above. All Information May Be Submitted Directly To The Contract Specialist Listed Above. This Information Must Be Provided By The Response Date Indicated Above. in Order To Be Considered An Interested Party, Vendors Must Complete And Return The Attached Market Survey To The Contract Specialist Listed Above By The Required Response Date. note: This Project Contains Drawings/specifications. You May Access The Tdp Directly From Cfolders And Searching For The Above Cited Solicitation Number. you May Access Them Only Through The Following Link: Https://pcf1.bsm.dla.mil/cfolders. the Drawings Cannot Be Accessed Through Dibbs. thank You In Advance For Your Assistance.

Details: Description Republic Of The Philippines Batangas State University Alangilan, Batangas City Request For Quotation "procurement Of Other Supplies For Research Project Sagip" 1. The Batangas State University (batstate U) Through The Bids And Awards Committee Invites Interested Firms/supplier To Submit Quotation For The Project "procurement Of Other Supplies For Research Project Sagip" With An Approved Budget For The Contract (abc) Sixty-three Thousand Seven Hundred Twenty-four Pesos And Seventy-eight Centavos Only (php 63,724.78). Quotation Received In Excess Of The Abc Shall Be Automatically Rejected At The Opening. Item No. Qty Description Total 1. 1 Kilogram 6013 Welding Rod Hji 6013 2. 3 Piece Abs Pvc Junction Box Dimension: 200 X 155 X 80 Mm Ip: 65 Water Proof Material Properties 3. 3 Piece Arduino Mkr 1010 Speed: 48 Mhz Digital I/o: 22 Wireless Connectivity: Wifi, Lo-ra Pwm Pins: 12 Analog I/o: 8 4. 3 Piece Bi Slip On Flange Size: 1-inch Internal Diameter 15 Cm External Diameter 1 Cm Thickness Stainless Steel 304 5. 3 Piece Carbon Monoxide Sensor Mics-5524 Carbon Monoxide Co2 Hydrogen H2 Methane Ch4 Air Quality Monitoring Gas Sensor Module Mics5524 6. 3 Piece Cutting Disc 4 Inch 7. 3 Piece Dc Voltage Regulator Xh-m404 Dc 4-38v 8a Voltage Regulator Module Digital Pwm Adjustabl Dc-dc Step Down Voltage Regulator Xl4016e1 8. 3 Piece Electrical Tape 3m 9. 3 Piece Galvanized Steel Pipe Size: 1 Inch X 1.2 X 20 Ft Thickness: 1.0mm Density: 7850 Kg/cm3 Ultimate Tensile Strength: 400 Mpa Yield Tensile Strength: 300 Mpa Young Modulus: 2010 Gpa Melting Point: 1,260°c 10. 3 Piece Grinding Disc 4 Inch 11. 3 Piece Lcd Display 4.3 Inch Esp32-s3 Hmi 8m Psram 16m Flash 480*270 Rgb Lcd Tft Module For Arduino Lvgl Wifi Bluetooth Smart Display Touch Screen 12. 3 Piece Nitrogen Oxide Sensor -4541 Mics-4514 Carbon Monoxide Nitrogen Oxygen Sensor Co/no2/h2/nh3/ch4 13. 3 Piece Pcb Board Pcb Prototyping Universal Board Fiberglass Plate 14. 3 Piece Rechargeable Battery Lifepo4 Cylindrical Battery Model Number 3.2v 20ah Weight 380g Charging Ratio 1c Discharge Rate 1c Model Ev C40 20ah 3.2v Lifepo4 Cell Voltage 3.2v Capacity 20ah Weight 0.38kg Cycle Life 6000 Cycles Usage Storage System Shape Cylinder Storage Type -25c To 40c Anode Material Lfp 15. 3 Meter Soldering Lead Soldering Lead 280g 1.0mm 16. 3 Piece Spray Paint Bosny Silver 17. 8 Piece Stainless Steel Bolts And Nuts Size: M10 X 1 Inch Tensile Strength: 700n/mm2 Yield Strength: 450n/mm2 18. 20 Meter Stranded Jumper Cable Wires #24 Copper 19. 3 Piece Sulfur Dioxide Sensor Sensor Type: Mos Figaro Typical Detection Range: 400-2000 Ppm 20. 3 Piece Voc Sensor Sensor Manufacture: Ams Sensor Model: Ccs811 Module Model: Cjmcu-811 Supply Voltage: 1.8v – 3.6v Current Consumption During Measurement: 26 Ma (max. 30 Ma In Mode 1) Current Consumption During Sleep: 19 Ua (@1.8v) Work Temperature: -5 Do 50 C 5 Modes Interface: I2c (10 - 400 Khz) Size: 20.1 X 14.7 X 2.7 Mm 21. 3 Piece Wind Direction Sensor Transducer Sensor Wind Direction Robot Detection 22. 3 Piece Wind Speed Sensor 30ms Polycarbon Wind Speed Direction Sensor Weather Station Outdoor 3 Cup Anemometer Sensor Output Rs485 4-20ma 0-5v 0-10v Note: Kindly Indicate The Brand On Your Quotation. Kindly Use The Canvass Form Provided For Your Quotation. 2. Philgeps Registration Certificate And Other Business Permits Shall Be Attached Upon Submission Of The Quotation. 3. The Quotation Must Be Submitted (can Also Be Send Thru Fax And Email At The Contact Details Listed Below) Or To The Alangilan Campus, Alangilan, Batangas City And Shall Be Received By The Committee On Or Before 5:00 Pm Of January 03, 2025. E-mail : Procurementquotation.alangilan@g.batstate-u.edu.ph 4. The Bsu Reserves The Right To Reject Any Or All Quotations And/or Proposals And Waive Any Formalities/informalities Therein And To Accept Such Bids It May Consider As Most Advantageous To The Agency And To The Government. Batstate U Neither Assumes Any Obligation For Whatsoever Losses That May Be Incurred In The Preparation Of Bids, Nor Does It Guarantee That An Award Will Be Made. Engr. Nomer M. Sarmiento Head, Procurement Office Alangilan Campus, Alangilan, Batangas City (043) 415-0139 Local 2130

Details: Description Invitation To Bid Bid No. B-426-2024 1. The Provincial Government Of Negros Oriental, Through Source Of Fund: Sp Res.# 660-2022 Ao #4, Series Of 2022 Gen. Fund, Cy 2022/responsibility Center:8751-96(22) Intends To Apply The Sum Of Eight Million Nine Hundred Fifty One Thousand Five Hundred Twenty Nine Pesos And 74/100 (php 8,951,529.74) Being The Approved Budget For The Contract (abc) To Payments Under The Contract To Hire Contractor To Provide Materials, Labor And Equipment For The “improvement/repair Of Bayawan, District Hospital, Bayawan City, Negros Oriental”. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Negros Oriental Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 180 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From The Bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00am To 5:00pm (monday To Friday). Wilma D. Padilla Head, Bac Secretariat Bac Secretariat Office, Ground Floor, Convention Hotel, Capitol Area, Dumaguete City Telephone Number : (035) 225-111, Local 475 Or 475 / Telefax Number Of Bac Secretariat: (035) 226-3804 Email Address Of Bac Secretariat: Bac-secretariat@negor.gov.ph / Bac.secretariat.neg.or@gmail.com 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 13, 2024 To January 7, 2025 Up To 1:00 In The Afternoon From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Eight Thousand Five Hundred Pesos (php 8,500.00). 6. The Bids And Awards Committee Will Hold A Pre-bid Conference On December 23, 2024 At 2:00 In The Afternoon At The Bac Conference Room, Ground Floor, Convention Hotel, Capitol Area, Dumaguete City And/or Through Video Conferencing Or Webcasting Via Google Meet, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before January 7, 2025 At 1:00 In The Afternoon. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 7, 2025 At 1:30 In The Afternoon, Bac Conference Room, Ground Floor, Convention Hotel, Capitol Area, Dumaguete City At The Given Address Below. The Attendance Of The Prospective Bidders Or His/her Duly Representative Is Highly Encouraged. 10. Submitted Documents Without Proper Tabbing For All Copies (3 Envelopes) With Name Of The Document (not Letters Or Numbers) And Not Book Bounded (soft/hard) Is Automatically Disqualified. 11. All Interested Bidders Are Required To Submit An Affidavit Of Site Inspection Certified By The Provincial Engineer Before They Are Allowed To Get The Bidding Documents From The Bac Secretariat. 12. The Bac Of The Province Of Negros Oriental Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Engr. Andre M. Reyes Provincial Engineer’s Office Capitol Area, Dumaguete City Tel. No.: (035) 226-1982; Facsimile No.: (035) 226-1982 Email : Peonegor@yahoo.com.ph Arthur Fran P. Tolcidas Bac Chairman To Hire Contractor To Provide Materials, Labor And Equipment For The “improvement/repair Of Bayawan , District Hospital, Bayawan City, Negros Oriental" Which Includes The Following Scope Of Work: Item No. Item Of Work Quantity Unit I. General Requirements I.1 Mobilization/demobilization 1.00 Lot I.2 Temporary Facility 1.00 Lot I.3 Occupational Safety & Health Program 180.00 Day I.4 Signages 1.00 Lot Ii. Demolition Works (include Kitchen Center Table) 1.00 Lot Iii. Excavation Works 73.52 Cu.m. Iv. Concrete Works 77.59 Cu.m. V. Reinforcing Steel Works 9,979.88 Kg. Vi. Formworks And Scaffolding 495.49 Sq.m. Vii. Masonry Works 1,650.91 Sq.m. Viii. Cabinetry Works 1.00 Lot Ix. Steel Works 1.00 Lot X. Ceiling Works 163.79 Sq.m. Xi. Tiling Works 153.29 Sq.m. Xii. Roof Works 1.00 Lot Xiii. Plumbing Works 1.00 Lot Xiv. Doors And Windows 1.00 Lot Xv. Painting Works 1.00 Lot Xvi. Electrical Works 1.00 Lot Contract Duration: 180 Calendar Days Abc:p 8,951,529.74

Details: Fy26 Eafb - 80 Row Eps, Ellsworth Afb, South Dakota (sd) sources Sought Notice #w9128f25sm004 anticipated Solicitation #w9128r25r0027 this Is A Sources Sought Notice And Is For Market Research Purposes Only. This Is Not A Request For Proposal, Quotation Or Bid. No Solicitation Is Currently Available. the U.s. Army Corps Of Engineers, Omaha District Is Conducting Market Research To Identify Sources (small Businesses And Other-than-small Businesses) That Have The Knowledge, Skills And Capability To Perform The Work Concerning The Potential Project Described Below. Responses Are Requested Only From: Potential Prime Construction Contractors With Company Bonding Capability (single Job) Of At Least $65m. The Responses To This Source Sought Announcement Will Be Used By The Government To Make Appropriate Acquisition Decisions For This Project. responses Are To Be Sent Via Email To Thomas.g.mcfall@usace.army.mil And Courtesy Copy Brittany.c.gull@usace.army.mil No Later Than 2:00 P.m. Cdt, 07 January 2025. questions Or Concerns Surrounding Small Business Matters Can Be Sent To Cenwo-sb@usace.army.mil. Please Include The Sources Sought Notice Identification Number In The Subject Line Of Any Email Submission. magnitude Of Construction: disclosure Of The Magnitude Of Construction, As Prescribed In Far 36.204 And Dfars 236.204, Is Between $25m And $100m. This Project Will Be Primarily Funded With Milcon-appropriated Dollars. project Location And Description: Ellsworth Afb, Sd this Upcoming Solicitation Will Be Executed Using A Design-bid-build (dbb) Project Delivery Method, Which Will Require The Contractor To Provide The Government With A Complete Facility And Warranty Based On The Request For Proposal (rfp). b-21 80 Row Eps, Ellsworth Air Force Base (eafb), South Dakota (sd). this Project Will Provide Six (6) New Pre-engineered Metal Environmental Protection Shelters (eps), Approximately 20,000 Sf Each. Eps’s Are Sized To Fit The B-2a “spirit” Aircraft With Space To Perform General Aircraft Maintenance. The Project Also Includes Associated Airfield And Ground Support Equipment (gse) Paving. Supporting Facilities Include Three (3) Maintenance Kiosks, Approximately 160 Sf Each, Providing Electrical And Communication Infrastructure To The Eps’s. This Project Will Include A Space Or Spaces Constructed To Afi 16-1404 Requirements. Additionally, This Project Will Full Demolition Of Existing Facilities And Partial Demotion Of Dock 83 And Reconstruction Of The Exterior Metal Wall Of Dock 83. facilities Will Be Designed As Permanent Construction In Accordance With The Dod Unified Facilities Criteria (ufc) 1-200-01, General Building Requirements And Ufc 1-200-02, High Performance And Sustainable Building Requirements. Each Facility Must Be Compatible With Applicable Dod, Air Force, Aircraft, And Base Design Standards. In Addition, Sustainable (green) Construction Materials And Techniques Shall Be Used Where Cost Effective And/or Where Specified. special Construction And Functional Requirements: The Project Will Be Constructed Near Row 80 Of Flightline Facilities At Eafb. As Such, The Project Will Be Constructed Adjacent To – And May Be Required To Integrate With Active Airfield Operations. It Will Also Be Constructed Adjacent To Other Active B-21 Facility Construction Sites. Demolition Of Existing Utilities And Infrastructure – To Include Hazardous Materials Contaminated Apron And Soils May Be Required. New Airfield Apron Will Be Designed In Compliance With Ufc 3-260-02 And Will Be Constructed In Compliance With Ufgs 32 13 14.13. project Period Of Performance: 800 Calendar Days From Construction Ntp. project Labor Agreement Requirements: please Note, This Project May Be Subject To A Project Labor Agreement As Per Executive Order (e.o.) 14063. A Separate Project Labor Agreement Survey Will Be Posted To Sam.gov To Assist With The Market Research Of This Acquisition. submission Details: all Interested, Capable, Qualified (under Naics Code 237990 – Other Heavy And Civil Engineering Construction) And Responsive Contractors Are Encouraged To Reply To This Market Survey Request. Interested Prime Contractors Only Should Submit A Narrative Demonstrating Their Experience In Construction Projects Of Similar Nature For Each Facility As Described Above. Narratives Shall Be No Longer Than 12 Pages. E-mail Responses Are Required. please Include The Following Information In Your Response/narrative: company Name, Address, And Point Of Contact, With (h)is/her Phone Number And Email Address cage Code And Duns Number statement Certifying Business Size Such As Wosb, Sdvosb, Etc. To Include Any Official Teaming Arrangements As A Partnership Or Joint Venture details Of Similar Projects Within The Last 8 Years And State Whether You Were The Prime Or Subcontractor start And End Dates Of Construction Work project References (including Owner With Phone Number And Email Address) project Cost, Term, And Complexity Of Job information On Your Bonding Capability - Specifically Identify Performance And Payment Bonds Capacities details On Similar Projects With Scope And Complexity Should Identify Experience With The Following Within The Past 10 Years. construction Of Airfield Paving In Compliance With Ufc 3-260-02 Or Associated Unified Federal Guide Specifications. construction Of Similar Clear-span Type Covered Storage Or Maintenance Facility (large Pre-engineered Metal Building Systems, Large Vehicle Storage, Large Bay Facility, Etc.) construction Of Facilities To The Afi 16-1404 Or Equivalent Standards. construction Of Facilities Designed To Resist Vibroacoustic Impacts Associated With Aircraft (or Other) Engine Runup And Taxiing. construction Of Facilities On A Dod Military Installation. construction Of Facilities On An Active Airfield Flightline. abatement And/or Remediation Of Asbestos, Lead Based Paint, And/or Other Hazardous Materials. responses Will Be Shared With Government Personnel And The Project Management Team On A Need-to-know Basis, But Otherwise Will Be Held In Strict Confidence. please Note: At This Time, We Are Only Interested In Responses From Companies Who Have The Ability To Be Prime Contractors With Bonding Capability (single Job) Of At Least $65m. estimated Construction Contract Award Will Be Second / Third Quarter Of Fiscal Year 2026. telephone Inquiries Will Not Be Accepted.

Details: Purpose Of Amendment 07 Is To Extend The Due Date For Proposals first: The Due Date For Proposals Is Hereby Updated To The Following: proposals Are Due No Later Than January 10, 2025, At 1200 Et. Any Proposal Received After This Time Will Be Deemed Non-responsive And Will Not Be Considered For Award. ******************************* second: All Terms And Conditions Remain Unchanged And In Full Effect. **************************************************************************************** purpose Of Amendment 06 Is To Extend The Due Date For Proposals first: The Due Date For Proposals Is Hereby Updated To The Following: proposals Are Due No Later Than January 07, 2025, At 1200 Et. Any Proposal Received After This Time Will Be Deemed Non-responsive And Will Not Be Considered For Award. ******************************* second: All Terms And Conditions Remain Unchanged And In Full Effect. **************************************************************************************** purpose Of Amendment 05 Is To Incorporate Updated Q&a And Include Additional Attachments As Follows: first: The Q&a Released On December 02, 2024 Is Hereby Superseded By The Q&a With Revision Date Of December 16, 2024. This Q&a Will Replace The Previous Version And Will Be Remain Attachment J-8. Updated Faa Responses Within The Document Are Highlighted. ******************************* second: Due To The Updated Q&a, Additional Attachments Are Required And Are Being Released And Outlined As The Following: 1. J-9_20241213_101951 2. J-10_20241213_102014 3. J-11_20241213_102043 4. J-12_20241213_102514 5. J-13_20241213_102801 6. J-14_20241213_102844 7. J-15_20241213_103246 8. J-16_20241213-103308 9. J-17_20241213_103520 10. J-18_20241213_104733 11. J-19_pwm Plot Layout With Staging Area And Office Shown 12. J-20_utility Site Plan Pwm-d-atct-c110-bl ***************************** third: The Due Date For Proposals Still Remains January 03, 2025, At 1200 Et. Any Proposal Received After This Time Will Be Deemed Non-responsive And Will Not Be Considered For Award. ***************************** fourth: All Other Terms Remain Unchanged And In Full Effect. **************************************************************************************** purpose Of Amendment 04 Is To Extend The Due Date For Proposals And Release The Q&a And Supporting Attachments As Follows: first: The Due Date For Proposals Is Hereby Updated To The Following: proposals Are Due No Later Than January 03, 2025, At 1200 Et. Any Proposal Received After This Time Will Be Deemed Non-responsive And Will Not Be Considered For Award. ******************************* second: The Following Attachments Are Hereby Included In This Amendment: 1. J-5_mobile Office_ps1 2. J-6_pwm Hvac Adendum Notes List 3. J-7_restroom Trailer Spec Sheet 4. J-8_qa For Pwm Hvac And Fire Alarm_ December 02, 2024 ******************************* third: All Terms And Conditions Remain Unchanged And In Full Effect. **************************************************************************************** purpose Of Amendment 03 Is Extending The Due Date For Proposals As Follows: first: The Due Date For Proposals Is Hereby Updated To The Following: proposals Are Due No Later Than December 16, 2024, At 1200 Et. Any Proposal Received After This Time Will Be Deemed Non-responsive And Will Not Be Considered For Award. ******************************* second: All Terms And Conditions Remain Unchanged And In Full Effect. **************************************************************************************** purpose Of Amendment 02 Is Changing The Dates For The Following Timeline: first: The Date For The Site Visit Hereby Updated To The Following: a Site Visit Is Scheduled For October 29, 2024 At 0900et. If You Wish To Attend, Submit Your Name, Company And Contact Information For All Attendees To Erin.m.crabtree@faa.gov And Joni.l.haynes@faa.gov No Later Than October 25, 2024. ******************************* second: The Due Date For Questions Is Hereby Updated To The Following: submit Questions In Writing To Erin.m.crabtree@faa.gov And Joni.l.haynes@faa.gov No Later Than November 06, 2024, By 1200 Et. ******************************* third: The Due Date For Proposals Is Hereby Updated To The Following: proposals Are Due No Later Than November 29, 2024, At 1200 Et. Any Proposal Received After This Time Will Be Deemed Non-responsive And Will Not Be Considered For Award. ******************************* fourth: All Terms And Conditions Remain Unchanged And In Full Effect. **************************************************************************************** purpose Of Amendment 0001 Is To Change The Size Standard For This Solicitation As Follows: first: The Size Standard For This Solicitation Is Hereby Changed To The Following: from: Small Business Set-aside. to: Full And Open second: All Other Terms And Conditions Remain Unchanged And In Full Effect. **************************************************************************************** the Pwm Atct Hvac Project Is Primarily An Equipment Replacement/upgrade Project With Mechanical Controls. The Existing Chiller And Dry Cooler Will Be Replaced With Two New Chillers. The Existing Boiler Will Be Replaced With Two Redundant Boilers. The Hot Water And Chilled Pumps Will Be Replaced With New Vfd Pumps Along With A New Piping Configuration To Be Installed. A Total Of Four New Crus Will Be Installed To Replace The Existing Crus. The Existing Rtu That Controls The Base Building Air Will Be Fully Replaced Along With All Its Duct Work. New Vavs To Be Installed In The Base Building System As Well. The Existing Stair Pressurization Will Be Replaced Along With Theremoval/addition Of Several Smoke Detectors Throughout The Building. The Existing Ballasted Base Building Roof Will Be Fully Replaced With A Pvc Membrane Roof System. All Existing Three Way Hydronic Valves Will Be Replaced With Two Way Belimo Energy Valves. The Existing Trane Bas Will Be Replaced In Full With Schneider Electric Ecostruxure Bas. New Equipment Will Also Be Installed Including Fan Coil Unit And Bathroom Exhaust Fans. Incidental Work Includes Hydronic Piping, Domestic Water Piping, Pipe Insulation, Wall Insulation, Framing, And Gypsum Board, Painting, Joint Sealants, Electrical Wiring And Devices, Concrete Pads, And Equipment Supports. A Significant Portion Of The Work Also Includes Temporary Heating And Cooling, Testing & Balancing And Commissioning. The List Is Not All Inclusive And Other Items Of Work Are Required.

Details: Sources Sought Solicitation Number: 36c26025r0039, Project 653-25-100, Remodel Building 88 Clc Space At Roseburg Va Medical Center, Roseburg Oregon this Is A Sources Sought Announcement Only. This Is Not A Request For Proposals, Quotations, Or Bids; Nor A Synopsis Of A Proposed Contract Action Under Far Subpart 5.2 And No Contract Shall Be Awarded From This Notice. No Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Sources Sought Or Any Follow Up Information Requests. No Solicitation Is Currently Available. The Draft Documents: Sow, Drawings, Specifications, Etc. Are Attached To The Sources Sought And Are Subject To Change. This Notice Is For Market Research Purposes To Gain Knowledge Of Interest, Capabilities, And Qualifications Of Interested Small Business Firms. Responses To This Sources Sought May Shape The Acquisition Strategy In Developing A Competitive Requirement. Not Responding To This Notice Does Not Preclude Participation In Any Future Or Potential Solicitation. It Is The Intent Of The Va To Use The Information Gathered For Market Research Purposes Only. veterans Health Administration, Regional Procurement Office West, Network Contracting Office 20, Is Conducting Market Research For A Construction Contract To Remodel Bldg 88 Clc Space. This Remodel Shall Include Remodeling Within The Building Envelope (a, B, C, D, E Wings), Work On Exterior Hardscape And Softscape, A Tub-room, A Building Wide Nurse Call System, Oxygen Supply And Distribution System, And The Installation Of Patient Lifts As Well As General Construction Work That Is Required To Install These Healthcare Systems And Components. Work Shall Include Mechanical, Electrical, Masonry, Seismic Non-structural, Fire Systems, Communication, Engineering, Commissioning And All Such Disciplines Of Work That Will Be Required To Install The Systems And Components For This Project. Work Is Located Roseburg Va Medical Center At 913 Nw Garden Valley Blvd Roseburg, Or 97471. For The Principal Components Of Work See The Attached Draft Statement Of Work, Specifications, And Drawings. Documents Are Currently In Draft State And Industry Comment / Suggestions Are Greatly Encouraged And Welcomed. the Estimated Magnitude For This Project Is Between $2,000,000 And $5,000,000. sources Are Being Sought For Firms With A North American Industry Classification System (naics) Code Of 236220- Commercial And Institutional Buildings Construction. Plumbing, (product Service Code) Psc Y1da And A With A Small Business Size Standard Of 45.0 Million. Sources Are Highly Encouraged To Respond To This Notice. after Review Of The Responses To This Notice, And If The Government Still Plans To Proceed With This Project, A Separate Pre-solicitation Announcement Will Be Published On Www.sam.gov. Responses To This Announcement Are Not An Adequate Response To Any Future Solicitation Announcement. responses Are Requested With The Following Information And Shall Not Exceed A Total Of Two (2) Pages. the Email Subject Line Will Contain The Solicitation Number: 36c26025r0039. please Provide The Following Information: contact Information: Name, Address, Sam.gov Uei Number, And Points Of Contact With Telephone Numbers And E-mail Addresses. business Size/classification (based On Naics 236220): is Your Firm Eligible For Participation In One Of The Following Small Business Programs? If So, Please Indicate The Program. [ ] Yes [ ] No Small Business (sb) [ ] Yes [ ] No Hubzone [ ] Yes [ ] No Small Business 8(a) [ ] Yes [ ] No Small Disadvantaged Business (sdb) [ ] Yes [ ] No Women-owned (wo) Small Business [ ] Yes [ ] No Service Disabled Veteran Owned Small Business (sdvosb) [ ] Yes [ ] No Veteran Owned Small Business (vosb) [ ] Yes [ ] No Other (please Specify) capabilities Statement: Description Of Capabilities To Perform Construction Services As Described Above And Project Experience Demonstrating Relevant Experience Similar To Those Described. Include Bonding Capability Information That Is Consistent With Estimated Magnitude. sdvosb Or Vosb Businesses Please Include Statement On Maintaining Compliance With Vaar 852.219-75 Va Notice Of Limitations On Subcontracting Certificate Of Compliance For Services And Construction, 852.219-76 Va Notice Of Limitations On Subcontracting Certificate Of Compliance For Supplies And Products. all Other Socio-economic Business Please Include Statement On Maintaining Compliance With Far 52.219-14 Limitation Of Subcontracting. time: Based On The Information Provided, Please Estimate The Total Project Time In Days. products: 52.225-10 Notice Of Buy American Requirement-construction Materials And 52.225-9 Buy American-construction Materials Will Apply To Any Subsequent Procurement Action. Identify Any Supplies/products That May Conflict With The Buy American Requirements. Also, Identify And Any Potential Supplies/materials With Long Lead Time Estimates. past Performance/experience: Provide Information On Contracts Of Similar Scopes Of Work Or Construction Contracts, Briefly Describe No More Than Three (3) Contracts (or Specific Task Orders) Completed Within The Past Five Years Of The Issue Date Of This Sources Sought Notice. The Past Performance Information Should Include: project Title/contract Number location: City, State general Description Of The Construction To Demonstrate Relevance To The Proposed Project offerors Role dollar Value Of Contract name Of The Company, Agency, Or Government Entity For Which The Work Was Performed what Types Of Information Is Required To Submit Accurate Offers? if Submitting Past Performance/experience On A Project In The Role Of A Subcontractor, Include The Prime Contractor S Name And A Quantifiable Amount (percentage) Of The Project Your Company Contributed To The Overall Scope Of Work. note: Do Not Include Proprietary, Classified, Confidential, Or Sensitive Information In Responses. no Responses Will Be Accepted By Fax. responses Will Not Be Returned. Telephonic Responses Will Not Be Honored. Please Respond By Email Only. Send Responses To The Contract Specialist, Toni J. Knight At Toni.knnight@va.gov. responses Will Be Accepted Until Friday January 3, 2025 By 10am Pst.

Details: Description Sir/madam: Please Submit Your Lowest Price Quotation (including Taxes And Government Discounts) On Charged Account Basis, On The Following Supplies/materials/ Equipment On Line Item Bid Or If Labor, On Lump Sum Bid For The Account And Official Use Of The Authority. This Request For Quotation Or Your Formal Bid Proposal May Be Submitted Through E-mail At Procmiaa@gmail.com (see Note #1 For Details) Or Personally Submitted On A Sealed Envelope Stating The Company Name/address And Project Title With R.i.s. # Thru The Bid Drop Box At The Office Of The Procurement Division On Or Before January 10, 2025 @ 2:00 Pm. Please Synchronize Your Time With The Philippine Standard Time (pst) At Www.pagasa.dost.gov.ph Thank You. Benjamin T. Manalili Iii Oic, Procurement Division Notes: 1. Quotations May Be Submitted Either Typewritten (preferred) Or Handwritten. For Quotations Sent Thru E-mail, The File Must Be On A Compressed Folder (in .zip File Format) Which Shall Be Password-protected. The Password For Accessing The Bidding Documents Will Be Disclosed By The Bidders Only During The Actual Bid Opening Which May Be Done In Person Or Thru E-mail. 2. Alternative Bids/a Bid With Options Shall Be Rejected. 3. Request For Quotation Can Be Obtained From The Office Of Procurement Division On January 7 To 10, 2025. 4. Warranty Shall Be For A Period Of One (1) Year For Item Nos. 1-5 And Three (3) Months For Item Nos. 6-46, Which Shall Commence After The Final Acceptance Of The End-user. 5. Price Validity Shall Be For A Period Of 120 Calendar Days From Opening Of Bid. 6. Submit Sample/s And Brochure/s, If Applicable, Showing Specifications Of Product Being Offered. Likewise State The Brand In The Rfq Or Bid Proposal. 7. If Awarded, The Bidder Shall Submit The Required Registration Documents. Qty. Unit Description Of Articles Abc/unit Equipment Tools 2 Pcs Lineman Handset 11,518.80 1 Pc Multimeter Tester (digital) 63,900.00 1 Pc Multimeter Tester (analog) 34,426.80 1 Pc Tone Set (tone Generator With Tracer) 18,555.60 1 Pc Network Lan Tester 4,744.80 1 Pc Network Crimping Tool 592.80 1 Pc Crimping Tool 670.80 1 Pc Set Of Pliers (pliers, Long Nose & Cutter) 4,071.60 1 Pc Screw Divers (positive & Negative) 780.00 1 Pc Precision Tool (set) 1,440.00 1 Pc Allen Wrench (socket Set) 1,042.80 1 Pc Impact "punch Down" Tool 394.80 1 Pc Gun Tucket T50 2,346.00 1 Pc Gun Tucket T25 3,300.00 1 Pc Laser Distance Meter 4,515.60 1 Pc Bench Work Holder With Magnifier 1,116.00 1 Pc Soldering Iron 1,658.40 1 Pc Soldering Pump 822.00 Personal Protective Equipment (ppe) 12 Pcs Reflectorized Vest With Customized Embroidered Print/label "engineering" 1,318.80 And Name Of Personnel 12 Pcs Anti-static Gloves 286.80 2 Pcs Safety Googles 152.92 2 Pcs Safety Harness 754.80 2 Pcs Safety Hard Hat 166.80 Materials/consumables Various Supplies 3 Rolls Utp Cat 6 Awg 24 For Outdoor (305m/roll) 11,190.00 3 Rolls Utp Cat 5e Awg24 For Indoor (305m/roll) 9,420.00 3 Rolls Utp 25-pairs Cables (305m/roll) 300.00 3 Rolls Telehone Flat Cord (105m/roll) 10,779.60 50 Pcs Telephone Handset Cord (spiral Coiled Black 20") 180.00 50 Pcs Telephone Outlet Box (single) 624.00 50 Pcs Telephone Outlet Box (double) 1,167.60 3 Rolls Soldering Lead 597.60 1 Box T50 Staple Wires 1,023.44 1 Box T25 Staple Wires 1,188.02 50 Pcs Electrical Tape 49.20 50 Pcs Double Adhesive Tape, Heavy Duty (1.6mm Thk. X 19mm W X 13.7m Length Or Roll) 70.80 10 Pcs Plastic Moulding 1/2" X 8 Ft. 151.20 10 Pcs Flexible Rubber Moulding Cover 1/2" X 8ft. 1,800.00 10 Pcs Aluminum Threshold 1,184.77 10 Pcs Wd-40 354.96 10 Btls Electronics Contact Cleaner 178.33 20 Pcs Ac Power Adapter 156.00 25 Pcs Rj45 (100pcs/pack) 126.00 25 Pcs Rj11 122.69 25 Pcs Rj9 158.75 25 Packs Cable Tie 6" (black) 87.60 25 Packs Cable Tie 8" (black) 190.80 \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ Prepared And Canvassed By: John Patrick P. Lazaro Procurement Officer Procurement Division Manila International Airport Authority Tel. No.: 877-1109 Local 4300