Electrical Tenders

Details: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Analog Discrete Input Measurement Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Analog Discrete Input Measurement Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements analog Discrete Input Measurement Performance Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Draft Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Paras Patel, Paras.d.patel.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Analog Discrete Input Measurement Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Responses To This Rfi And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th By 4pm Est.

Details: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Analog Resistance Measurement Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Analog Resistance Measurement Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements analog Resistance Measurement Performance Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Paras Patel, Paras.d.patel.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Analog Resistance Measurement Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Rfi Responses And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th By 4pm Est.

Details: This Synopsis Is A Pre-solicitation Notice From The U.s. Department Of Commerce, National Oceanic And Atmospheric Administration (noaa), Corporate Services Acquisition Division (csad), Facilities Support Branch notice Id: 1305m4-24-r-0071 this Is A Pre-solicitation Notice Only. project Title: Manchester Campus Addition Construction At The Manchester Research Station In Port Orchard, Washington location: Noaa Nw Fisheries Research Station 7305 E. Beach Drive Port Orchard, Wa 98366 classification And General Information: this Requirement Will Be Issued As A Full And Open Competition the North American Industry Classification System (naics) Code Associated With This Procurement Is 236220, Commercial And Institutional Building Construction. The Small Business Administration Standard Of $45 Million Dollars In Annual Receipts Averaged Over A Business’s Latest Three (3) Complete Fiscal Years Or (except In The Business Loan And Disaster Loan Programs) Five (5) Complete Fiscal Years To Determine The Average Annual Receipts. If A Business Hasn’t Been In Business For Five (5) Years, Multiply Its Average Weekly Revenue By 52 To Determine Its Average Annual Receipts. this Contract Will Be Full And Open, And The Contractor Shall Be Selected By Federal Acquisition Regulation (far) Part 15.1 Source Selection Procedures. This Procurement Will Be Competitive, Utilizing The Tradeoff Process Approach Under The Best Value Continuum (far 15.101). This Process Permits Tradeoffs Among Cost Or Price And Technical Factors. It Allows The Government To Accept Other Than The Lowest Priced Offeror Or Different Than The Highest Technically Rated Offeror. All Evaluation Factors Other Than Cost Or Price, When Combined, Are Significantly More Important Than Cost Or Price. The Best Value Method Is Essential To Evaluate And Compare Costs And Prices To Select The Most Advantageous Offer. The Planned Project Delivery Method Will Result In A Firm- Fixed-price Contract For Construction Services. background Overview: the National Oceanic And Atmospheric Administration (noaa) Has A Requirement For A Campus Addition Construction Project For The Northwest Fisheries Science Center (nwfsc) At The Manchester Research Station (mrs), 7305 Beach Drive East, Manchester, Wa 98353. This Project Constitutes A Ground Up, New Construction Project Of Approximately 24,000 Gsf To Be Located On The Existing Mrs Campus West Of Seattle, Washington, North Of The Town Of Manchester. the National Marine Fisheries Service (nmfs) Northwest Fisheries Science Center Mission Supports The Conservation And Management Of Living Marine Resources And Their Habitats In The Northeast Pacific Ocean. Nmfs Research Assists Resource Managers In Making Sound Decisions That Build Sustainable Fisheries, Recover Endangered And Threatened Species, Sustain Healthy Ecosystems, And Expand Domestic Seafood Production Through Sustainable Marine Aquaculture. project Description - Construction: Generally Described As Follows But Not Limited To: a New, Energy Efficient Facility That Will Include Modern Laboratory Facilities For Data Collection And Research That Focuses On Understanding The Life Cycle Of Marine Species And The Impacts Of Ecosystem Stressors On Anadromous And Marine Fish And Invertebrates. 2. The Facility May Include But Is Not Limited To The Following Program Areas And Facilities: A. Recirculating Aquatic System (fresh And Saltwater) B. Wet Labs C. Dry Labs D. Facility Storage E. Gas Generation F. Freezer Storage G. Office Spaces H. Hatcheries I. Electrical, Mechanical And Communication Spaces J. Site Work Including Utilities, Sidewalks, Parking, Roadways, And Landscaping this Is A New Requirement For Construction Services For The Manchester Campus Addition From A Traditional Design-bid-build Delivery. The Solicitation And Resulting Contract Will Provide The 100% Design Drawings And Specifications For The Manchester Campus Addition Construction Project In Section J. site Visit Information: offerors Will Have The Opportunity To Visit The Site Before Submission Of Their Technical And Price Proposals. The Site Visit Details, To Be Held At The Manchester Research Station (mrs) Facility, Will Be Outlined In The Solicitation Package. Currently The Site Visit Is Projected To Be Held On Or About February 21, 2025. If Applicable, All Required Site Access Information As Outlined In Section J. Must Be Submitted In Accordance With The Solicitation Requirements For Site Visit Entry. project Period Of Performance And Budget: this Project Shall Be Performed By An Experienced General Construction Contractor That Has Performed Similar Work. The Estimated Performance Period Is 700 Calendar Days, Including Base + Optional Clins From Issuance Of Notice To Proceed. Prospective Offerors Are Advised To Thoroughly Review The Entire Solicitation (sf1442 Form) To Gain A Clear Understanding Of The Project's Budget As Specified By The Individual Contract Line Item Numbers (clins). system For Award Management (sam): all Contractors Interested In This Project And Doing Business With The Federal Government Must Be Registered With The System For Award Management (sam): Https://www.sam.gov issuance Of Solicitation With Requirements Information: noaa Anticipates Publishing The Solicitation And Supporting Documents Package On Or About Tuesday, February 4, 2025, With The Offer/receipt Date/time: Friday, April 4, 2025, 12:00 Pm Eastern Time (et) For Phase I And Tuesday, June 17, 2025, 12:00 Pm Et For Phase Ii. The Solicitation Will Be Available Electronically At The S.a.m. Website: Www.sam.gov. No Paper Copies, Faxes, Or Emails Will Be Available. Please Register As An Interested Source To Be Notified Of Amendments, Clarifications, Or Other Changes. Entities (even Those Registered As A Source) Are Responsible For Checking The Sam.gov Website Frequently To Ensure They Have All Available Information. in The Interim The Government Has Elected To Provide A Draft Copy Of The Complete Solicitation On Or About December 10, 2024 (the Draft 100% Design And Specifications Only Are Available As Of November 4, 2024). Once Uploaded, We Encourage Interested Parties To Review These Draft Documents. We Again Want To Emphasize That These Documents Are In “draft” Form And Are Subject To Change Upon Final Solicitation Issuance. Please Note, Referenced Attachments Are Included With This Release. Any Questions Regarding Gaining Access To The Materials Shall Be Directed To Mr. Scott Gebhardt At Scott.gebhardt@noaa.gov And Ms. Ronette C. Mcbean-felder At Ronette.mcbean-felder@noaa.gov. as A Reminder, This Draft Release Is Not A Solicitation For Government Services. Noaa Does Not Anticipate Posting Questions And Responses Or Amendments To This Draft As Would Occur With A Formal Rfp. No Awards Will Be Made From This Draft Release And Any Voluntary Informational Responses Submitted May Be Accomplished Via The Campus Addition Draft Solicitation Information Link. Keeping In Mind, Direct Responses To Informational Queries Or Clarifications May Not Be Made, But At The Government’s Discretion May Be Included In The Resulting Final Solicitation. Respondents Are Advised That The Government Will Not Pay For Any Information Or Administrative Costs Incurred In Response To This Draft Solicitation; All Costs Associated With Responding To This Draft Solicitation Will Be Solely At The Respondent’s Expense. prospective Contractors Must Limit The Dissemination Of This Information To Authorized Users Only. Dissemination Of Information Shall Only Be Made Upon Determining That The Recipient Is Authorized To Receive It. The Criterion For Deciding Authorization Is Need-to-know. Those Who Need To Know Are Those Who Are Specifically Granted Access For The Conduct Of Business On Behalf Of Or With Noaa. This Authority Includes All Persons Or Firms Necessary To Do Work At The Request Of The Government, Such As Architects And Engineers, Consultants, Contractors, Subcontractors, Suppliers, And Others That The Prospective Contractor Deems Necessary To Submit An Offer/bid Or To Complete The Work Or Contract, As Well As Maintenance And Repair Contractors And Equipment Service Contractors.

Details: Description 1. 2. The City Government Of Valencia Through Its Annual Appropriations Intends To Apply The Sum Of One Million Nine Hundred Forty Thousand Nine Hundred Eighteen Pesos And 46/100 (php 1,940,918.46) Being The Approved Budget Of The Contract (abc) To Payments Under The Contract For The Road Concreting At Purok 2, Barangay Bagontaas, Valencia City, Bukidnon. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The City Government Of Valencia Now Invites Bids For The Road Concreting At Purok 2, Barangay Bagontaas, Valencia City, Bukidnon. Particulars Describes As Follows: Local Government Of Valencia Catarata Street, Poblacion, Valencia City, Bukidnon, Philippines Philippine Access (088) 828-5430 Invitation To Bid For The Road Concreting At Purok 2, Barangay Bagontaas, Valencia City, Bukidnon Contract Reference No. 04-20225 01/03/2025 Item No. Qty 1.00 Unit Description Road Concreting At Barangay Bagontaas (near Hotel De Susana), Valencia City, Bukidnon With The Following Scope Of Works: Station 0+285.00 - Station 0+406.10 (121.10 L.m.) Concreting Of Road - 3m Width/lane, 0.23m Thick Pccp With Gravel Surface Shoulder - 1m B/s; Includes Removal And Relocation Of 2 Unit Electrical Pole And Installation Of 8 L.m. 910mm Rcpc Cross Drain @ Station 0+404.00. Other General Requirements Project Billboards/signboards Occupational Safety And Health Program Traffic Management Mobilization / Demobilization Removal And Relocation Of Utilities Civil Works Earthworks Clearing And Grubbing Foundation Fill Subgrade Preparation (common Material) Subbase And Base Course Aggregate Subbase Course Surface Courses Gravel Surface Course Portland Cement Concrete Pavement (unreinforced) - 0.23m Thick 14days Specifications Unit Total Cost Cost 1,940,918.46 1 Lot See Attached Plan And Specifications B.5 B.7(2) B.8(2) B.9 B.12 100(1) 103(3) 2.00 1.00 1.00 1.00 2.00 0.05 0.80 Each Ls Ls Ls Each Ha Cu.m. Sq.m. Cu.m. Cu.m. Sq.m. 105(1)a 1,089.90 200(1) 145.32 300(1) 55.70 311(1)c 1 726.60 500(1)b 3 8.00 L.m. 506(1) 2.87 Cu.m. Drainage And Slope Protection Structures Pipe Culverts, 910mm Dia. - Class Ivrcpc Stone Masonry X-x-x-x-x-x-nothing Follows-x-x-x-x-x-x-x-x- Total Amount 1,940,918.46 Required Number Of Days For Completion Is 50 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project Within 10 Years From The Date Of Submission And Receipt Of The Bid Hereof. The Description Of An "eligible Bidder" Is Contained In The Bidding Documents, Particularly In Section Ii. Instructions To Bidders. 3. No Time Extension Shall Be Granted Unless On Fortuitous Event, Acts Of Nature Or Any Natural Calamities. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary "pass/fail" Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act". Bidding Is Restricted To Filipino Citizens, Sole Proprietorship, Partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 5. Interested Bidders May Obtain Further Information From Josafat L. Caipang, Head Of Lgu-valencia City Bac Secretariat And Inspect The Bidding Documents At Address Given Below From Mondays-fridays 8:00 Am To 5:00 Pm. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders On January 4, 2025 To Opening Date From The Address Below And Upon Payment Of Non-refundable Fee For The Bidding Documents In The Amount Five Thousand Pesos (php 5,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) Provided That The Bidders Shall Pay The Non-refundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Site Inspection Is Required From Every Interested Bidder And Site Inspection Certificate Shall Form Part Of The Bid Documents. No Site Inspection Certificate Shall Mean Automatic Disqualification. Site Inspection Schedule Is On January 10, 2025 At 10:00 O’clock In The Morning, Assembly Area At Bac Office. 6. The City Government Of Valencia Will Hold Its Pre-bid Conference On January 13, 2025 (1:30 Pm) At The Bac Office, City Hall Compound, City Of Valencia, Bukidnon Which Shall Be Open To All Interested Bidders. 7. Only Project Engineers, Materials Engineer And The Like Are Required To Attend The Pre-bid Conference. In The Absence Of The Same, The Representative Must Present To The Bac An Authorization Letter Signed By The Owner. 8. Interested Contractor Are Required To Include In Their Technical Bid Proposal The Duly Signed List Of Contractor's Equipment Units, Which Are Owned, Leased And/or Under Purchase Agreements, Supported By Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project. 9. Prospective Bidders Who Were Not Able To Purchase Bid Documents Prior To The Bid Opening Shall Not Be Opened And Will Be Disqualified. 10. Bids Must Be Delivered To The Address Below On Or Before (1:00 Pm) January 27, 2025. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms In The Amount Stated In Itb Clause 18. Bids Will Be Opened In The Presence Of The Bidders’ Representative Who Chooses To Attend At The Address Below. Bid Opening Shall Be On (1:30 Pm) January 27, 2025 At Bac Office, City Hall Compound, City Of Valencia, Bukidnon. Late Bids Shall Not Be Accepted. The Clock In The Bac Office Shall Serve As The Time Reference, And Shall Be The Basis For The Official Time Received Of The Bidding Documents Submitted In The Office. 11. The City Government Of Valencia Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of The Bid. 12. The Head Of The Procuring Entity (hope) Reserves The Right To Accept Or Reject Any Or All Bids To Annul The Bidding Process, At Any Time Prior To Contract Award Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. All Correspondence Shall Be Addressed To The Bac Secretariat, Attention: Mr. Abe P. Gillaco, Mpa, Bac Chairman. 14. For Further Information, Please Refer To: Lgu Valencia City-josafat L. Caipang Admin Office, 8709 Catarata St., Poblacion, Valencia City, Bukidnon Tel. No. (088) 828-5430 Abe P. Gillaco, Mpa Bac Chairman

Details: Description Invitation To Bid For The Procurement Of 1 Unit Perchloric Fumehood (47" Or 120 Cm Width To Fit With Existing Space In The Laboratory) 1. The Department Of Agriculture-regional Field Office 7, Will Conduct A Public Bidding Through Early Procurement Activities (epa) Of National Expenditure Plan (nep) For Fiscal Year 2025 (gaa 2025) And Intends To Apply The Sum Of One Million Six Hundred Forty Thousand Pesos (₱1,640,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of 1 Unit Perchloric Fumehood (47" Or 120 Cm Width To Fit With Existing Space In The Laboratory). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture – Rfo 7 Is Conducting This Procurement Through The Early Procurement Activity (epa) For National Expenditure Plan (nep) For Fiscal Year 2025 (gaa 2025) To Ensure The Timely Delivery Of Goods, Implementation Of Infrastructure Projects And Rendition Of Consultancy Services Where The Procuring Entity (pe) Is Encouraged To Start Procurement Activity Short Of Award. 3. Epa Shall Refer To The Conduct Of Procurement Activities, From Posting Of The Procurement Opportunity, If Required, Until Recommendation Of The Bids And Awards Committee (bac) To The Hope As To The Award Of The Contract, For Goods To Be Delivered, Infrastructure Projects To Be Implemented And Consulting Services To Be Rendered In The Following Fiscal Year (i.e., Fy 2021), Pending Approval Of Their Respective Funding Sources. The Bidders, Therefore, Are Herewith Informed Of The Following: A. Interested Bidders Are Invited/requested To Submit Their Bid Proposals Based On Indicative Budget (i.e. Subject To Final Approval) Through This Invitation To Bid, Together With The Bidding Documents; B. The Pe Will Evaluate The Bid Proposals And Determine The Winning Bidder. The Financial Bid Proposal Of The Winning Bidder Will Be Contract Price/amount Which Is Considered Fixed Price. However, The Notice Of Award (noa) Will Only Be Issued Upon The Approval Of The Budget (i.e., Short Of Award); And C. Would There Be A Delay In The Award As Affected By The Possible Delay In The Budget Approval, The Bid Validity As Specified In The Bidding Documents (which Is A Maximum Of 120 Calendar Days), The Winning Bidder May Be Requested To Extend The Bid Validity Accordingly (that Is, Changing The Expiration Of The Original Bid Security). In Case Of The Bidder’s Refusal To Extend The Bid Validity, The Bid Submitted By Said Bidder Will Be Rejected. 4. The Department Of Agriculture-regional Field Office 7 Now Invites Bids For The Procurement Of 1 Unit Perchloric Fumehood (47" Or 120 Cm Width To Fit With Existing Space In The Laboratory) @ 1,640,000.00 With The Following Details/specifications: * With Wash Down System Or Spray Bar On Fume Cupboard; * Worktop & Sump Made Of Acid Resistant, Non-combustible Trespa Material, Minimum Of 13 Mm Thickness With Slots; * Inner Chamber Moulded Of Chemical Resistant, Corrosion Resistant, Temperature & Humidity Resistant & Fire Retardant Glass Reinforced Plastic (grp); * With 0.75kw Motor And Chemical Resistant Exhaust Fan Or Blower, 10""; * Toughened Glass 6mm Sash; * Control Panel With Lcd Display For Real Time Air Flow Monitoring, Light, Emergency Alarm & Other Functions; * Aerodynamic Design For Maximum Containment; * Certifications And Accreditations To Ensure Durability & Quality Such As: - Fume Cupboards Compliant To Us/australian Third Party Product Registration By Sai Global; - Third Party Accreditation With Astm/nata For Fume Cupboard Testing; - Third Party Accreditation With Sai Global For Iso 9000 Quality Systems. * Free Installation And Commissioning Included Utilizing The Existing Piping System (with Modification) For Ducting By Trained Service Engineer; All Materials Needed Will Be Provided Including Electrical Materials; * To Include Free Dismantling Of Old Fumehood Where The New Unit Will Be Installed; * Warranty Period Of 1 Year Or More; * Free Preventive Maintenance Within Warranty Period Or Beyond Warranty Period; * With Compatible Avr. Delivery Site: Regional Soils Laboratory, Da7 Complex, Maguikay, Mandaue City, Cebu Delivery Of The Goods Is Required Within 90 Calendar Days From The Receipt Of Approved Notice To Proceed (ntp). Bidders Should Have Completed, Within Five Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 5. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non- Discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 6. Prospective Bidders May Obtain Further Information From Department Of Agriculture- Regional Field Office 7- Bac 2 Secretariat Through The Contact Details Given Below And Inspect The Bidding Documents As Posted On The Philippine Government Electronic Procurement System (philgeps). 7. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 13, 2024 From The Given Address Below And Upon Payment Of Non-refundable Bid Document Fee The Amount Of Five Thousand Pesos (₱5,000.00) (based On Appendix 8 - Guidelines On The Sale Of Bidding Documents Of The 2016 Revised Irr Of 9184 Updated As Of January 31, 2023. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Which Will Be Presented In Person, By Facsimile, Or Through Electronic Means. 8. The Department Of Agriculture-regional Field Office 7, Will Hold A Pre-bid Conference On December 23, 2024 -2:00 P.m. At Da Conference Room, Da Complex, Highway Maguikay, Mandaue City, Which Shall Be Open To Prospective Bidders. Electronic Pre-bidding May Not Available For This Procurement Opportunity. 9. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before January 7, 2025 - 10:00 A.m. Late Bids Shall Not Be Accepted. 10. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 11. Bid Opening Shall Be On January 7, 2025 - 10:00 A.m. At Da-rfo 7 Conference Room, Da Complex, Highway Maguikay, Mandaue City. Bids Will Be Opened In The Presence Of The Bidders Or Bidder’s Authorized Representatives Who Choose To Attend The Activity. Electronic Bidding May Not Available For This Procurement Opportunity. 12. The Department Of Agriculture Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 13. The Department Of Agriculture Regional Field Office 7 (da-rfo 7) Reserves The Right To Reject Any And All Bids, Annul The Bidding Process, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 14. For Further Information, Please Refer To: Bac 2 / Procurement Section Department Of Agriculture Regional Field Office-7 Telefax No. 032-2682698 Or 032-345-3483 December 13, 2024 (sgd.) Rtd Wilberto O. Castillo, Ph.d. Bac Chairperson

Details: This Advertisement Is Hereby Incorporated Into The Rlp 24-reg02 By Way Of Reference As An Rlp Attachment. u.s. Government Seeks To Lease The Following Office Space Through The Automated Advanced Acquisition Program (aaap): city: Mountainside state: New Jersey delineated Area: north: Fairmount Ave To Route 124 To John F Kennedy Parkway To Route 510 east: Route 510 To Garden State Parkway To Elizabeth River To Route 439/elmora Ave south: Route 439/elmora Ave To Westfield Ave To North Ave west: North Ave To Mountain Ave To Us Highway 22 To Union Ave To New Providence Road/diamond Hill Road/union Ave To Springfield Ave To Central Ave To Fairmount Ave minimum Aboa Square Feet: 11,150 maximum Aboa Square Feet: 11,373 space Type: Office And Specialized Space lease Term: 17 Years, 15 Firm parking Requirement: 13 Reserved Spaces offerors Are Encouraged To Submit Rates For All Terms Available In The Aaap For Consideration Against Future Gsa Requirements. amortization Term: 8 Years For Both Tenant Improvementsand Building Specific Amortized Capital. agency Unique Requirements agency Tenant Improvement Allowance: existing Leased Space: $66.04 Per Aboa Sf other Locations Offered: $66.04 Per Aboa Sf building Specific Amortized Capital (bsac): existing Leased Space: $12.00 Per Aboa Sf other Locations Offered: $12.00 Per Aboa Sf other Unique Requirements: the Government Requires 24/7 Access To The Premises And Its Appurtenant Areas the Building Must Be At Least 1,000 Feet Away From Schools, Daycares And Parks. the Building Must Be Located Within A Walkable Half Mile Of Mass Transit Stops. the Tenant Requires A Secured Path Of Travel To Transport Detainees Into The Building. Access To A Non-public Elevator, Such As A Freight Elevator, Is Preferred, For This Purpose the Offered Space Is To Be Contiguous On One Floor, Located On Or Above The 2nd Floor. The Space Must De Demised Into Three Suites Within Their Own Separate Entrances. Demising Walls May Require Slab-to-slab Construction. if All Office Space Cannot Be Contiguous On One Floor: a Contiguous Block Of Space Of At Least 3,000 Aboa Sf Must Be Located On Or Above The 2nd Floor. a Contiguous Block Of Space Of At Least 4,800 Aboa Sf Must Be Contiguous On One Floor And Can Be Located On Any Above-ground Floor. a Contiguous Block Of Space Of At Least 3,350 Aboa Sf Must Be Contiguous On One Floor And Can Be Located On Any Above-ground Floor. thirteen (13) Reserved Spaces For Official Government Vehicles. In Addition, The Lessor Shall Provide A Pro-rata Share Of Parking Spaces As Required By The Applicable Code Of The Local Government Entity Having Jurisdiction Over The Property. structured Parking Preferred But Not Mandatory. the Governmentrequires A Standard Server Rack In A Secured Room Or Areawith Proper Ventilation And Dedicated Electrical Services For The Agency's Server Equipment. the Government Is Assigned A Facility Security Requirements Level Ii. Refer To The Aaap Website Published Rlp Attachment Titled "facility Security Requirements - Level Ii" For More Detail. important Notes check The Attachments And Links Section Of This Notice For Possible, Additional Project-specific Requirements Or Modifications To The Rlp. offerors Are Advised To Familiarize Themselves With The Telecommunications Prohibitions Outlined Under Section 889 Of The Fy19 National Defense Authorization Act (ndaa), As Implemented By Federal Acquisition Regulation (far). For More Information, Visit: Https://acquisition.gov/far-case-2019-009/889_part_b offerors Are Advised That All Shell Work Associated With Delivering The Tenant Improvements Are At The Lessor’s Cost. Please Refer To Section 3(construction Standards And Shell Components)and Specifically To Paragraph 3.07(building Shell Requirements)of Theaaap Rlp Attachment #2 Titled "lease Contract" (gsaform L100_aaap ) For More Detail. Tenant Improvement Components Are Detailed Under Section 5 Of The Aaap Rlp Attachment#2 Titled "lease Contract" (gsaform L100_aaap) . it Is Highly Recommended That Offerors Start The Sam Registration Process Directly Following The Offer Submission. Refer To Rlp Clause 3.06. (if Applicable) The Government Intends To Award A Lease To An Offeror Of A Building That Is In Compliance With Seismic Standards. Section 2.03 Of The Request For Lease Proposals (rlp) Outlines Compliance Activities Required For All Leases In Moderate Or High Seismic Zones. To Determine If Your Property Lies In A Moderate Or High Zone, Please Reference The Map And Documents On Our Website. how To Offer the Automated Advanced Acquisition Program (aaap), Located At Https://leasing.gsa.gov/, Will Enable Interested Parties To Offer Space For Lease To The Federal Government In Response To The Fy24 Aaap Rlp. In Addition, The Government Will Use Its Aaap To Satisfy The Above Space Requirement. offerors Must Go To The Aaap Website, Select The “register To Offer Space” Link And Follow The Instructions To Register. Instructional Guides And Video Tutorials Are Offered On The Aaap Homepage And In The “help” Tab On The Aaap Website. Once Registered, Interested Parties May Enter Offers During Any “open Period”. For Technical Assistance With Aaap, Email Lop.help@gsa.gov. the Open Period Is The 1st Through The 7th Of Each Month, Ending At 7:30 P.m. (et) Unless Otherwise Stated By The Government And Unless The 7th Falls On A Weekend Or Federal Holiday. If The 7th Falls On A Weekend Or Federal Holiday, The Open Period Will End At 7:30 Pm (et) On The Next Business Day. Refer To Aaap Rlp Paragraph 3.02 For More Details On The Offer Submission Process. The Government Reserves The Right To Allow For Multiple Open Periods Prior To Selecting An Offer For Award To Meet This Specific Space Requirement. Offers Cannot Be Submitted During The Closed Period And Will Not Be Considered For Projects Executed During That Time Period. lease Award Will Be Made To The Lowest Price, Technically Acceptable Offer, Without Negotiations, Based Upon The Requirements In This Advertisement And In The Rlp Requirements Package Found On The Aaap Website. During An Open Period, Offerors Will Be Permitted To Submit New Offers Or Modify Existing Offers. Offerors Can Draft An Offer At Any Time; However, You Can Only Submit An Offer During The Open Period. the Offered Space Must Comply With The Requirements In This Advertisement And The Rlp And Must Meet Federal Government, State, And Local Jurisdiction Requirements, Including Requirements For Fire And Life Safety, Security, Accessibility, Seismic, Energy, And Sustainability Standards In Accordance With The Terms Of The Lease. The Lease And All Documents That Constitute The Lease Package Can Be Found At Https://leasing.gsa.gov/leasing/s/aaap-portalhome. if You Have Previously Submitted An Offer In Fy 2023, The Aaap Application Has A Copy Feature Which Will Allow Existing Offers To Be Copied Over To The Fy 2024 Rlp In Order To Avoid Having To Re-enter All Of The Data Manually. Please Be Sure To Review Fy24 Aaap Rlp Package And Each Page Within The Aaap Application Prior To Submitting Your Offer As Some Of The Questions Have Changed. You Must Re-enter Your Space And Rates On The ‘space And Rates’ Tab In The Aaap. Your Previous Offered Space Will Not Be Copied.

Details: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Analog Vibration Measurement Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Analog Vibration Measurement Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements analog Vibration Measurement Performance Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Justin Panecki, Justin.p.panecki2.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Analog Vibration Measurement Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Rfi Responses And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th 2024 By 4pm Est.

Details: Description The City Of Bayawan, Through Its Bids And Awards Committee (bac), Invites Suppliers / Manufacturers /distributors / Contractors To Bid For The Hereunder Projects: Item No.qtyunitarticlesbrandunitpricetotallot No. Iaggregates13cu.m.sand, Washed Mixing/screened Non Washed24cu.m.crushed Gravel, (screened & Washed), Max. Size 38mm Dialot No. Iibar And Rebar390lengthdeformed Bars, · 10mm X 6m420lengthangle Bar, 3mm X 38mm X 38mm X 6m Lot No. Iiibatteries, Cells And Accessories530unitlithium Ion Battery, · Capacity : 100 Ah· Dc Output Voltage: 12 V· Chemistry: Lithium Ion· Enclosure: Abs Plastic· Max Charge Voltage: 14.6±0.1v· Life Cycles :3,000 @ 80% Dod· Water Rating: Water Resistant· Warranty: 1 Yearlot No. Ivcarpentry Tools And Supplies65packcutting Disc, 4" (100mm), For Metal, Slim, 50pcs/pack710piecehacksaw Blade, · 24 Tpi· 12”x1/2”860piecebolt With Nut, · 13mm X 8”· With Nut And Washer92kilotie Wire, #18 G.i Wire101sheetphenolic Board, 16mm X 4' X 8 Lot No. Vcement And Additives1130bagcement, · Pozzolan· 40 Kg/baglot No. Viflood Rescue Equipment Invitation To Bid Republic Of The Philippinesprovince Of Negros Orientalcity Of Bayawanbids And Awards Committeebid No.:itb-24-318date.:11.dec.2024geps Publication:geps December 17, 2024newspaper:none Item No.qtyunitarticlesbrandunitpricetotal1230unitmppt Solar Charge Controller, · System Nominal Voltage 12 /24/36/48vdc Auto· Battery Type Lithium / Lead-acid· Charging Technology Mppt· Maximum Charging Current 40a· Maximum Discharge Current 40a· Max Pv Input Power 130w12v/260w 24v· Max.pv Open Circuit Voltage 100v Lot No. Viiinformation And Communication Technology Equipment, Devices And Accessories1319unitwifi Radio, Mechanical· Dimensions 512 X 385.8 X 258.3 Mm (20.2 X 15.2 X 10.2")· Enclosure Material Aluminum, Plastic· Mounting Pole Mount (kit Included)· Wind Loading 550 N At 200 Km/h (123.6 Lbf At 125 Mph)hardware· Networking Interface (1) Gbe Rj45 Port· Power Supply 24v, 0.3a Gigabit Poe Adapter (included)· Max. Power Consumption 7w· Leds Power, Ethernet· Operating Frequency (mhz) 5150-5875 Mhz143boxrj-45 Connector, 3 Box· 100 Pcs/box· Pass Thru155boxutp Cable, Outdoor, Cat6, 23 Awg, Inner Jacket: Pvc, Outer Jacket: Pe, Insulation: Polythelene, 305 Meters/box1615unitwifi Adapter With Rs485 Interface, 15 Units· Hf22111720piecesolar Panel, · Maximum Power/pmax(w)：120w· Open-circuit Voltage/voc(v)：22.32· Max Power Voltage/vmp(v)：18· Max Power Current/lmp(a)：6.67· Weight(kg)：7.6· Dimension(mm)：1126*666*35· Max System Voltage(v)：600lot No. Viiimeasuring/observing/testing Devices Invitation To Bid Republic Of The Philippinesprovince Of Negros Orientalcity Of Bayawanbids And Awards Committeebid No.:itb-24-318date.:11.dec.2024geps Publication:geps December 17, 2024newspaper:none Item No.qtyunitarticlesbrandunitpricetotal185unitwater Level Sensor, · Certification: Ce· Application: Water, Fuel Level Sensor· Measuring Range:0-60m· Output Signal:4-20ma/hart· Accuracy:0.5%fs, 1%fs· Power Supply:24vdc· Output:4-20 Ma Liquid Ultrasonic· Type: Ultrasonic Level Transmitter1910unitautomated Weather Station, · Style : Display Version 3· Batteries: 4 Aa Batteries Required.· Assembly Required : No· Batteries Required? : Yes· Included Components : Digital Display With Pc Connect, 5-in-1 Weather Sensor, Usb Cable, Mounting Bracket, Mounting Hardware, Power Adapterlot No. Ixplumbing Supplies2050lengthgi Pipe, 50 Length· Schedule 40· 1 1/2” Diameter212lengthg.i Pipe, · 1 ¼” Dia. X 6m· Schedule 40lot No. Xsteel Sheets And Mesh221sheetsteel Plate, 6mm X 1.20m X 2.40m 235sheetsteel Plate, G.i., Gauge # 22 X 1.20m X 2.40mlot No. Xielectrical Supplies And Materials2410packcable Tie, M3 X 100 Mm2510rollelectrical Tape, Rubber 18mm X 5m Self Fusing Ethylene Propylene Rubber (roll) 265rollguy Wire, · # 12 G.i. Wire· 30 Kilos/roll27401pieceturn Buckle, 12mm X 0.20m (hook & Eye)*** Nothing Follows *** Bid Documents Shall Be Available At The Bac Office, New City Hall, Lgu Bayawan City Upon Payment Of Prescribed Non-refundable Fee In The Amount Of Php Bidders Shall Drop Their Technical And Financial Proposals In The Bid Box At The Bac Office, Bayawan City On Or Before The Deadline Of Submission Of Bids As Shown Below. All Particulars Relative To Eligibility Process, Opening And Evaluation Of Bids, Postqualification And Award Of Contract Shall Be Governed By The Applicable Provisions Of Ra. 9184. The City Of Bayawan Reserves The Right To Reject Any Or All Bids, To Waive Any Defects Or Formality Therein And To Accept Bids Considered Responsive And Most Advantageous To The Government. The Complete Schedule Of Activities Is Listed, As Follows: Basis Of Evaluationper Lotper Itemlot No.description Of Lottotal Abc Of Lotbid Securitycash/mc/bank Gurantee (2% Of Abc)1aggregates7,100.00142.002bar And Rebar40,100.00802.003batteries, Cells And Accessories750,000.0015,000.004carpentry Tools And Supplies21,940.00438.805cement And Additives9,000.00180.006flood Rescue Equipment240,000.004,800.007information And Communication Technology Equipment, Devices And Accessories494,000.009,880.008measuring/observing/testing Devices525,000.0010,500.009plumbing Supplies62,200.001,244.0010steel Sheets And Mesh24,100.00482.0011electrical Supplies And Materials61,105.001,222.101,000.00 Invitation To Bid Republic Of The Philippinesprovince Of Negros Orientalcity Of Bayawanbids And Awards Committee(035) 531-0020 Local 202(035) 430-0439 (telefax)email: Bac.bayawan@gmail.comhttp://www.bayawancity.gov.ph Activitiesscheduleissuance Of Bid Documents December 17, 2024 To January 6, 2025@ 5:00 P.m.pre-bid Conference December 26, 2024@ 9:00 Amdeadline/opening Of Bids January 7, 2025@ 9:00 Ampost Qualificationjanuary 14, 2025@ 9:00 Amawarding Of Bidsjanuary 21, 2025@ 9:00 Am Approved:virginia D. Sadiasa City Civil Registrar Bac Chairman

Details: Description 1. The National Irrigation Administration – Cagayan-batanes Irrigation Management Office, Through The General Appropriations Act Of 2025 Being The Approved Budget For The Contract (abc) Amounting To Forty-nine Million Two Hundred Sixty-nine Thousand Four Hundred Forty-eight Pesos And Thirty-six Centavos (php 49,269,448.36) To Payments For One (1) Contract Package Listed Below. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. I. Itb No. : Infra-ncb-cbimo-30-25 Name Of Project : Various Spip 5 Location : Sanchez Mira, Cagayan Description Of Project : Construction Of Three (3) Units 15hp Solar Pump, Supply, Delivery And Installation Of Solar Panels, Steel Gate, Irrigation Facilities And Construction Of Canal Lining For Bangan Spip, Nagrangtayan Spip, And Gammaru Spip, Sanchez Mira, Cagayan Approved Budget For The Contract : Php 49,269,448.36 Slcc (atleast To 50% Of Abc) Php 24,634,724.18 License Category : Category “b” In General Engineering Size Range : Medium “a” In Irrigation, Electrical Works And Mechanical Works Fund Source : Egpip-solar For Cy 2025 Contract Duration : 150 Cd. Bid Documents Fee : Php 25,000.00 2. The National Irrigation Administration – Cagayan-batanes Irrigation Management Office Now Invites Bids For The Above Procurement Project. Completion Of The Works Are Required As Specified Above. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii, Instruction To Bidders (itb). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From National Irrigation Administration – Cagayan-batanes Irrigation Management Office And Inspect The Bidding Documents At The Address Given Below From 8:00am To 5:00pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 23, 2024 From The Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount As Indicated Above. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees To Be Presented In Person. Interested Bidders’ Representative Must Be Part Of The Company’s Organizational Structure And Must Submit An Original Special Power Of Attorney, Authorizing Him/her To Acquire Or Purchase The Bidding Documents And/or Represent The Bidding Process Whichever Is Applicable. For Corporation, He/she Must Present Duly Notarized Board Resolution Or Secretary’s Certificate Authorizing Him/her To Acquire Or Purchase The Bidding Documents And/or Represents The Bidding Process Whichever Is Applicable. Authorized Managing Officers Who Opt To Personally Purchase Bidding Documents Shall Present Any Valid Id To The Bac Secretariat. 6. Requirements Upon Purchase Of The Bidding Documents: 1) Updated Contractor’s Profile With Single Largest Completed Contract (slcc); 2) Original Valid Pcab License; And 3) Only The Owner/proprietor, Or Authorized Representative Is Allowed To Purchase The Bidding Documents. Pursuant To Sec 34.3(b)ii Of The 2016 Revised Irr Of Ra 9184, Post Qualification Also Focus On: “ii) Verification Of Availability And Commitment, And/or Inspection And Testing For The Required Capacity And Operating Conditions Of Equipment Units To Be Owned/leased/under Purchase By The Bidder For The Use In The Contract Under Bidding, As Well As Checking The Performance Of The Bidder In Its Ongoing Government And Private Contracts, If Any Of These Ongoing Contracts Shows: A. Negative Slippage Of At Least Fifteen Percent (15%) In Any One Project Or A Negative Slippage Of At Least Ten Percent (10%) In Each Of Two (2) Or More Contracts; B. Failure Of The Contractor And To Commence Repair Works On Ongoing Contracts Within Seven (7) Calendar Days And To Complete Them Within Thirty (30) Calendar Days After Receipt Of The Procuring Entity’s Notice To Defects And Deficiencies; C. Failure Of The Contractor To Commence Repair Works On Contracts With Pending Certificates Of Acceptance Within Thirty (30) Calendar Days And Complete Them Within Ninety (90) Days After Receipt Of The Procuring Entity’s Notice Of Defects And Failures; Or D. Substandard Quality Of Work As Per Contract Plans And Specifications, Or Unsatisfactory Performance Of The Contractor’s Obligations As Per Contract Terms And Conditions, At The Time Of Inspection. If The Bac Verifies Any Of These Deficiencies To Be Due To Contractor’s Fault Or Negligence, The Agency Shall Disqualify The Contractor From The Award, For The Procurement Of Infrastructure Projects. 7. The National Irrigation Administration – Cagayan-batanes Irrigation Management Office Will Hold A Pre-bid Conference On January 03, 2025, 9:00am At National Irrigation Administration – Cagayan-batanes Irrigation Management Office, Maddarulug, Solana, Cagayan And/or Through Videoconferencing/webcasting Via Google Meet (meet.google.com/ndo-suge-ziw) Which Shall Be Open To Prospective Bidders. 8. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before January 15, 2025, 8:30 Am. Bidders Representatives Shall Present Valid Id And Special Power Of Attorney (spa) To The Bac Secretariat In Order To Be Allowed To Submit Their Bids. Late Bids Shall Not Be Accepted. 9. Bidders May Submit Their Bids Through Courier Services At The Bidder’s Own Risk On The Date And Time At The Address Stated Above. Bid Submitted After The Deadline Shall Not Be Accepted. Submission Of Bids Through E-mail Are Not Yet Allowed. 10. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 11. Bid Opening Shall Be On January 15, 2025, 9:00 Am At National Irrigation Administration – Cagayan-batanes Irrigation Management Office, Maddarulug, Solana, Cagayan And/or Through Videoconferencing/webcasting Via Google Meet (meet.google.com/ndo-suge-ziw). Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 12. All Interested Bidders Must Conduct A Site Inspection With Corresponding Fee In The Amount Of P500.00 Within December 23, 2024 To January 14, 2025 Take Necessary Documentations To Be Attached To The Certificate Of Site Inspection Issued By National Irrigation Administration – Cagayan-batanes Irrigation Management Office Head Office Or National Irrigation System Field Offices. 13. The National Irrigation Administration – Cagayan-batanes Irrigation Management Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website 15. For Further Information, Please Refer To: The Bac Secretariat National Irrigation Administration-cbimo Maddarulug, Solana, Cagayan Email Address: R2.cagayan-imo@nia.gov.ph Telefax No.: 078-304-1840 Website Address: Www.nia.gov.ph December 20, 2024 Glenn Sherwin D. Rubino Chairperson – Bids And Awards Committee

Details: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Analog Tachometer Frequency Measurement Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Analog Tachometer Frequency Measurement Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements analog Tachometer Frequency Measurement Performance Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Paras Patel, Paras.d.patel.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Analog Tachometer Frequency Measurement Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Rfi Respsones And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th 2024 By 4pm Est.