Electrical Tenders

Details: The Los Angeles District, U.s. Army Corps Of Engineers Is Seeking To Lease A Minimum Of 4000 Net/usable To A Maximum Of 5000 Gross/rentable Square Feet (gross Square Feet To Include Any Common Area Factor), Of Existing Class A Or B Retail Space, In The Ventura, Ca, Within The Defined Delineated Area (da) Boundaries Below: north -- Telegraph Rd south -- Olivas Park Ave east –victoria Ave west – Seaward Ave the Government’s Desire Is For Afull-service Lease Of Retail Space For An Armed Forces Career Center For A Term Not To Exceed Five (5) Years With Government Terminationrights. offered Space Must Meet Government Requirements Per The Terms Of The Government Lease.interested Respondents May Include Building Owners And Representatives With The Exclusive Right To Represent Building Owners. Representatives Of Building Owners Must Include The Exclusivity Agreement, Representation Letter, Listing Contract Or Other Executed Agreement Granting The Exclusive Right To Represent The Building Owner With Their Response To This Advertisement. adequate Mass Transit (buses, Trains, Rail Cars) For The Public Within Three Walking Blocks Is Highly Desired. required spaces Must Offer Both A Primary And A Secondary Point Of Ingress/egress. lighted, Non-exclusive Or Reserved On-site Parking For Four 5 Marked Government Owned Vehicles Must Be Provided For On 24 Hours 7 Days A Week Basis. Additional Lighted Parking Must Be Available During Business Hours, Weekends And Holidays, For Approximately 5 Employee Vehicles And Visitors/recruit Candidate Parking. must Use The Government Lease. the Military Services Shall Have The Right To Use Space Beyond Normal Working Hours And, If Required, On Saturdays, Sundays, And Federal Holidays. This Includes The Use Of Elevators, Lights, Toilet Facilities, And, If Necessary, Heating And Air Conditioning. armed Forces Recruiting Facilities Are Only Located In Defined Geographical Areas That Contain Businesses And Other Establishments That Are Of A Compatible Nature. Under No Circumstances Will Be These Facilities To Be In Areas Where Sexually Oriented Businesses, Bars, Nightclubs, Liquor Stores, Smoke Shops, Marijuana Dispensaries Etc. Or Other Business That Produce Injurious Odors Detectable With The Leased Spaces. Placement Near These Establishments Can Hamper Overall Production Of The Office Or Cause Concern For The Safety Of The Personnel Stationed There And Their Visitors. lessors Are Required To Be Registered And Active In Www.sam.gov Prior To The Deadline For Final Offer Submission. proposals Are Due No Later Than 5:00 Pm (pst) On March 14th, 2025. responses Should Include: building Name And Address as-built Floor Plan Drawing digital Photo Of Street View Of Property area (boma Rentable Square Feet & Boma Usable Square Feet) rental Rate Per Square Foot Rentable Space To Include (cam, Taxes And Insurance) common Area Factor(s) For Available Space, If Applicable following Are The Factors That Will Be Considered When Evaluating Bids/offers: 1. Location 2. Ability To Meet All Construction Specifications, Security Measures And Lease Requirements 3. Complete Initial And Final Offers Must Be Received By Defined Deadline 4. Competitive Costs In The Best Interest Of The Government 5. Qualitative Ratings By Client For Mission additional Notes: three (3) Construction Bids For The Build-out Are Requested. After A Bid Is Accepted, No Change Orders Are Authorized, So Bids Need To Be Accurate And Complete (including All Taxes And Fees). Special Attention Should Be Given To Security Requirements (video Entry Control System, Closed Circuit Television System And Video Recording, Dual Roller Shades On Exterior Windows, Fixed Panel Shade On Exterior Entry Door And Peep Hole In Secondary Exit, Perforated Window Wrap), Fragmentation Film On Exterior Windows/glass Doors, Telecommunication Wiring Requirements, Addition Of Water Fountain, Signage, Paint, Wall Graphics, Phone Jacks, Electrical Outlets, And Spec'd Carpet Squares. These Are Items That Can Add A Significant Cost And May Be Overlooked In The Bid Process; However, All Items In The Specifications Need To Be Followed, Even If Code Does Not Require The Item (i.e., Smoke Detectors, Fire Extinguishers, Etc.). bids Shall Include Any Tear Down/haul Away Expenses. the Attached Floor Plan Is To Be Used As A Generalized Idea And Reference Tool For Proximity Of Amount Of Useable Space This Location Will Require For Build Out In Both Office Space And Common Area Space. Submitted Floor Plans Must Meet The Space Requirements As Designated On Attached Example. it Is Mandatory That Janitorial Services Be Included In The Lease (lessor Responsible For Contracting These Services). Be Sure To Review The Attached Janitorial Guidance And Ensure The Costs Of These Services Are Included On The Rental Proposal Works contact interested Parties May Contact Jaran Panichkul At The U.s. Army Corps Of Engineers, Los Angeles District, Real Estate Office, 915 Wilshire Blvd, Los Angeles, Ca 90017, 213-222-5481; Jaran.t.panichkul@usace.army.mil,no Later Than 5:00 Pm Pst On March 14, 2025.

Details: Description The Bids & Awards Committee (bac) Of Municipality Of Argao, Cebu, Invites All Interested Suppliers/manufacturers/distributors/contractors/consultants To Apply For Eligibility And To Submit Bids For The Following: B.9 Mobilization /demobilization Quantity 1.00 L.s. Dpwh Standard Output Per Hour (oph)= 1.00 L.s. 1.00 L.s. Mobilization /demobilization Direct Cost: A. Materials: B. Manpower: C. Equipment And Water: Number Of Hours 8.00 1.00 A. Low Bed Trailer Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) B.5 Project Billboard/signboard Quantity 1.00 L.s. Dpwh Standard Output Per Day (opd)= 1.00 L.s. 1.00 L.s. Project Billboard/signboard Direct Cost: A. Materials: 64.00 Sq.ft. A. Tarpaulin (4' X 8') 37.00 Bd.ft. B. Lumber Coco 1.00 Kg C. Common Nails Assorted 2.00 Sheets D. Plywood Marine (1/4" X 4' X 8') B. Manpower: Number Of Hours 4.00 1.00 A. Construction Foreman 4.00 1.00 B. Skilled Laborer 4.00 2.00 C. Unskilled Laborer C. Equipment And Water: 1.00 Lot Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) B.7(2) Occupational Safety And Health Program Quantity 1.00 L.s. Dpwh Standard Output Per Day (opd)= 1.00 L.s. 1.00 L.s. Occupational Safety And Health Program Direct Cost: A. Materials: 2769.00 Man-days A. Safety Helmet 2769.00 Man-days B. Safety Shoes 2769.00 Man-days D. Working Gloves 1.00 Set E. First Aid Kit B. Manpower: Number Of Days 15.00 1.00 A. Safety Practitioner/officer (part Time) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) B.3 Permits And Clearances Quantity 1.00 L.s. Dpwh Standard Output Per Day (opd)= 1.00 L.s. 1.00 L.s. Permits And Clearances Direct Cost: A. Materials: 1.00 L.s. Permits And Other Clearances - Building Permit Processing Fees Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 803(1)a Structure Excavation (common Soil) Quantity 18.74 M3 Dpwh Standard Output Per Hour (oph)= 20.00 M3 18.74 M3 Structure Excavation (common Soil) Direct Cost: A. Materials: B. Manpower: Number Of Hours 1.00 1.00 A. Construction Foreman 1.00 3.00 B. Unskilled Laborer C. Equipment And Water: Number Of Hours 1.00 1.00 A. Backhoe (0.80 Mᶾ) 1.00 2.00 B. Dumptruck (12 Ydᶾ) Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 804(1)a Embankment From Structure Excavation Quantity 32.33 M3 Dpwh Standard Output Per Hour (oph)= 9.84 M3 32.33 M3 Embankment From Structure Excavation Direct Cost: B. Manpower: Number Of Hours 1.00 1.00 A. Construction Foreman 1.00 3.00 B. Unskilled Laborer C. Equipment And Water: Number Of Hours 0.75 1.00 A. Plate Compactor (5 Hp) 0.75 1.00 B. Backhoe (0.80 M3) Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses 804(4) Gravel Bedding Quantity 11.87 M3 Dpwh Standard Output Per Hour (oph)= 1.20 M3 M3 11.87 M3 Gravel Bedding Direct Cost: B. Manpower: Number Of Hours 1.00 1.00 A. Construction Foreman 1.00 3.00 B. Unskilled Laborer C. Equipment And Water: Number Of Hours 0.50 1.00 A. Plate Compactor (5 Hp) Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 900(1)c2 " Structural Concrete (footing, Slab On Fill)" Tax (vat/withholding Tax) Quantity 9.32 M3 Dpwh Standard Output Per Hour (oph)= 0.357 M3 9.32 M3 "structural Concrete (footing, Slab On Fill)" Direct Cost: A. Materials: 1.00 M3 A. Gravel 0.50 M3 B. Sand 9.10 Bags C. Portland Cement B. Manpower: Number Of Hours 1.00 1.00 A. Construction Foreman 1.00 3.00 B. Skilled Laborer 1.00 5.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours 1.00 1.00 A. One Bagger Mixer Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 900(1)c3 " Structural Concrete (footing Tie Beam, Wall Footing)" Quantity 2.87 M3 Dpwh Standard Output Per Hour (oph)= 0.27 M3 2.87 M3 "structural Concrete (footing Tie Beam, Wall Footing)" Direct Cost: A. Materials: 1.00 M3 A. Gravel 0.50 M3 B. Sand 9.10 Bags C. Portland Cement B. Manpower: Number Of Hours 1.00 1.00 A. Construction Foreman 1.00 2.00 B. Skilled Laborer 1.00 4.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours 1.00 1.00 A. One Bagger Mixer Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 900(1)c4 " Structural Concrete (columns)" Quantity 3.74 M3 Dpwh Standard Output Per Hour (oph)= 0.27 M3 3.74 M3 "structural Concrete (columns)" Direct Cost: A. Materials: 1.00 M3 A. Gravel 0.50 M3 B. Sand 9.10 Bags C. Portland Cement B. Manpower: Number Of Hours 1.00 1.00 A. Construction Foreman 1.00 1.00 B. Skilled Laborer 1.00 4.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours 1.00 1.00 A. One Bagger Mixer Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 900(1)c5 " Structural Concrete (roof Beams, Lintel Beams, Cantilever Beams)" Quantity 1.40 M3 Dpwh Standard Output Per Hour (oph)= 0.27 M3 1.40 M3 "structural Concrete (roof Beams, Lintel Beams, Cantilever Beams)" Direct Cost: A. Materials: 1.00 M3 A. Gravel 0.50 M3 B. Sand 9.10 Bags C. Portland Cement B. Manpower: Number Of Hours 1.00 1.00 A. Construction Foreman 1.00 1.00 B. Skilled Laborer 1.00 4.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours 1.00 1.00 A. One Bagger Mixer Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 902(1) " Reinforcing Steel Of Reinforced Concrete Structures, Grade-40" Quantity 2,112.34 Kg Dpwh Standard Output Per Hour (oph)= 143.438 Kg 2112.34 Kg "reinforcing Steel Of Reinforced Concrete Structures, Grade-40" Direct Cost: A. Materials: 1.00 Kg A. Deformed Reinforcing Steel - G40 0.02 Kg B. #16galvanized Iron Wire C. Consumables (5% Of Materials Cost) B. Manpower: Number Of Hours 1.00 1.00 A. Construction Foreman 1.00 3.00 B. Skilled Laborer 1.00 12.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours 0.50 1.00 A. Bar Cutter 0.50 1.00 B. Bar Bender Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 903 (2) Formworks And Falseworks Quantity 71.61 M2 Dpwh Standard Output Per Hour (oph)= 3.24 M2 71.61 M2 Formworks And Falseworks Direct Cost: A. Materials: 0.35 Pcs A. Ordinary Plywood - 3 Uses 7.19 Bd Ft B. Good Lumber - 3 Use 0.21 Kg C. Assorted Common Wire Nail D. Consumables (5% Of Materials Cost) B. Manpower: Number Of Hours Installation 1.00 1.00 A. Construction Foreman 1.00 2.00 B. Skilled Laborer 1.00 4.00 C. Unskilled Laborer Removal 0.41 1.00 A. Construction Foreman 0.41 6.00 B. Unskilled Laborer C. Equipment And Water: Number Of Hours Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 1046.00 150 Mm Chb Non Load Bearinglload Bearing (including Reinforcing Steel) Quantity 124.20 M2 Dpwh Standard Output Per Hour (oph)= 3.825 M2 124.20 M2 150 Mm Chb Non Load Bearinglload Bearing (including Reinforcing Steel) Direct Cost: A. Materials: 13.00 Pc A. 150 Mm Thk Chb (non-load Bearing) 0.53 Bag B. Cement 0.04 Cu.m C.sand 3.24 Kg D. Reinforcing Steel 0.05 Kg E. #16 Tie Wire B. Manpower: Number Of Hours 1.00 1.00 A. Construction Foreman 1.00 2.00 B. Skilled Laborer 1.00 3.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours 1.00 1.00 A. One-bagger Mixer Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 1027(1) Cement Plaster Finish Quantity 112.77 M2 Dpwh Standard Output Per Hour (oph)= 7.125 M2 112.77 M2 Cement Plaster Finish Direct Cost: A. Materials: 0.33 Bag A. Cement 0.03 Cu.m B. Sand B. Manpower: Number Of Hours 1.00 1.00 A. Construction Foreman 1.00 2.00 B. Skilled Laborer 1.00 4.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 1047 (2)b Structural Steel Roof Truss Quantity 1,389.92 Kg Dpwh Standard Output Per Hour (oph)= 85 Kg 1389.92 Kg Structural Steel Roof Truss Direct Cost: A. Materials: 1.00 Kg A. Structural Steel (channel Bar A36) 0.01 Kg B. Acetylene 0.02 Kg C. Oxygen 0.02 Kg D. Welding Rod E. Consumables (5% Of Materials Cost) B. Manpower: Number Of Hours Fabrication 1.00 1.00 A. Construction Foreman 1.00 2.00 B. Skilled Laborer 1.00 2.00 C. Unskilled Laborer Erection 0.49 3.00 A. Skilled Laborer 0.49 3.00 B. Unskilled Laborer C. Equipment And Water: Number Of Hours 0.75 1.00 A. Welding Machine 0.25 1.00 B. Cutting Outfit 0.49 1.00 C. Truck Mounted Crane (20-25 Mt) Minor Tools (10 % Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 1047 (2)c Structural Steel Purlins Quantity 796.55 Kg Dpwh Standard Output Per Hour (oph)= 90.45 Kg 796.55 Kg Structural Steel Purlins Direct Cost: A. Materials: 1.05 Kg A. Structural Steel Framing Including Cross 0.02 Kg B. Acetylene C. Consumables (5% Of Materials Cost) B. Manpower: Number Of Hours Fabrication 1.00 1.00 A. Construction Foreman 1.00 2.00 B. Skilled Laborer 1.00 4.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours 1.00 2.00 A. Welding Machine Minor Tools (10 % Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 1047 (3)b Metal Structure Accessories (sagrods) Quantity 5.00 Pc Dpwh Standard Output Per Hour (oph)= 1 Pc 5.00 Pc Metal Structure Accessories (sagrods) Direct Cost: A. Materials: 1.00 Pc A. Sagrod With Nuts And Bolts 1.00 Pc B. 16 Mm Plain Round Bar With 16 Mm Turn Buckle B. Manpower: Number Of Hours Fabrication 1.00 1.00 A. Construction Foreman 1.00 1.00 B. Skilled Laborer 1.00 1.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours Minor Tools (10 % Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 1014.00 Prepainted Metal Sheets (rib Type, Long Span, 0.427 Mm Thk.) Quantity 135.60 M2 Dpwh Standard Output Per Hour (oph)= 2.769 M2 135.60 M2 Prepainted Metal Sheets (rib Type, Long Span, 0.427 Mm Thk.) Direct Cost: A. Materials: 1.00 M A. Prepainted Metal Sheets (rib Type, Long Span, 0.427mm Thk. 10.00 Pc B. Tek Screw C. Consumables (3% Of Materials Cost) B. Manpower: Number Of Hours 1.00 1.00 A. Construction Foreman 1.00 1.00 B. Skilled Laborer 1.00 2.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 1013(1) Fabricated Metal Roofing Accessory (flashings) Quantity 29.00 M Dpwh Standard Output Per Hour (oph)= 10 M 29.00 M Fabricated Metal Roofing Accessory (flashings) Direct Cost: A. Materials: 1.05 M A. Flashings (bended) 19.00 Pc B. Blind Rivets C. Consumables (3% Of Materials Cost) B. Manpower: Number Of Hours 1.00 1.00 A. Construction Foreman 1.00 1.00 B. Skilled Laborer 1.00 1.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 1013(2)c Fabricated Metal Roofing Accessory (gutter) Quantity 39.00 M Dpwh Standard Output Per Hour (oph)= 11.8 M 39.00 M Fabricated Metal Roofing Accessory (gutter) Direct Cost: A. Materials: 1.05 M A. Gutter (0.4 Mm) 3.00 Pc B. 12" X 1" Plain Gi Strap 16.00 Pc C. Blind Rivets C. Consumables (3% Of Materials Cost) B. Manpower: Number Of Hours 1.00 1.00 A. Construction Foreman 1.00 1.00 B. Skilled Laborer 1.00 1.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 1100(10) Conduit Works, Boxes And Fittings Quantity 1.00 I.s. Dpwh Standard Output Per Hour (oph)= "1.00" I.s. 1.00 I.s. Conduit Works, Boxes And Fittings Direct Cost: A. Materials: 0.00 Length A. Pvc Pipe Poly 3/4 25.00 Length B. Pvc Pipe Poly 1/2 3.00 Pcs C. Pvc Square Box Poly 5x5 50.00 Pcs D. Flexible Connector 1/2 12.00 Pcs E. Utility Box 2x4 15.00 Pcs F. Junction Box 4x4 1.00 Pcs G. 3/4 Ø Entrance Cap 5.00 Pcs H. Electrical Tape I. Consumables (5% Of Materials Cost) B. Manpower: Number Of Hours 30.21 1.00 A. Construction Foreman 30.21 1.00 B. Skilled Laborer 30.21 1.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 1101(33) Wires And Wiring Devices Quantity 1.00 I.s. Dpwh Standard Output Per Hour (oph)= 1 I.s. 1.00 I.s. Wires And Wiring Devices Direct Cost: A. Materials: 0.00 M A. Thhn Wire Stranded # 8 2.00 Box B.thhn Wire Stranded # 12 0.00 M C. Thhn Wire Stranded # 10 3.00 Set D. Flush Type Single-gang Switch 2.00 Set F. Flush Type Three-gang Switch 5.00 Set G. Flush Type Outlet 3 Gang Universal H. Consumables (3% Of Materials Cost) B. Manpower: Number Of Hours 11.50 1.00 A. Construction Foreman 11.50 1.00 B. Skilled Laborer 11.50 1.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 1102(1) Panel Board With Main Breaker/branches, 3 Wires, 1 Neutral, 50 Amp - 200 Amp Quantity 1.00 Set Dpwh Standard Output Per Hour (oph)= 1 Set 1.00 I.s. Panel Board With Main Breaker/branches, 3 Wires, 1 Neutral, 50 Amp - 200 Amp Direct Cost: A. Materials: 1.00 Pcs A. Panel Board Bolt On Type 6 Holes 1.00 Pcs B. 60 Amp. Plug-in Breaker 1.00 Pcs B. 30 Amp. Plug-in Breaker 2.00 Pcs B. 20 Amp. Plug-in Breaker 2.00 Pcs B. 15 Amp. Plug-in Breaker B. Consumables (3% Of Materials Cost) B. Manpower: Number Of Hours 5.50 1.00 A. Construction Foreman 5.50 1.00 B. Skilled Laborer 5.50 2.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 1103(1) Lighting Fixtures Quantity 1.00 Set Dpwh Standard Output Per Hour (oph)= 1 Set 1.00 I.s. Lighting Fixtures Direct Cost: A. Materials: 10.00 Units A. Led Pinlight 12w B. Manpower: Number Of Hours 10.00 1.00 A. Construction Foreman 10.00 1.00 B. Skilled Laborer 10.00 1.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours Minor Tools (10 % Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 1001 (8) Sewer Line Work Quantity 1.00 L.s. Dpwh Standard Output Per Hour (oph)= 1.00 Ls 1.00 I.s. Sewer Line Work Direct Cost: A. Materials: 6.00 Lengths A. 50 Mm Ø Pvc Pipe,series 1000 4.00 Lengths B. 100 Mm Ø Pvc Pipe, Series 1000 4.00 Pcs C. Pvc 45 Deg. (3mm Bend X 50mm) 3.00 Pcs D. Pvc 45 Deg. (3mm Bend X 101mm) 3.00 Pcs E. Pvc 87.5 Deg. (6mm Bend X 101mm) 2.00 Pcs F. Pvc 45 Deg. Single Branch, Wye (101mm X 101mm) 1.00 Pcs G. Pvc 87.5 Deg. Single Branch, Seep, Tee (101mm X 50mm) 0.00 Pcs H. Pvc Coupling (50mm D) 3.00 Pcs I. Pvc Coupling3 (101mm D) 0.00 Pcs J. Pvc P-trap W/ Plug & Sealing Rings (50mm) 1.00 Pcs K. Pvc P-trap W/ Plug & Sealing Rings (101mm) 1.00 Pcs L. Pvc Cleanout W/ Plug & Sealing Rings (101mm) B. Manpower: Number Of Hours 10.00 1.00 A. Construction Foreman 10.00 1.00 B. Skilled Laborer 10.00 2.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 1001 (9) Storm Drainage And Downspout Quantity 1.00 L.s. Dpwh Standard Output Per Hour (oph)= 1.00 Ls 1.00 I.s. Storm Drainage And Downspout Direct Cost: A. Materials: 10.00 Lengths A. 75 Mm Ø Pvc Pipe,series 1000 20.00 Ea B. Pvc 45 Deg. (3mm Bend X 76mm) 20.00 Ea C. Pvc Coupling (76mm D) D. Consumables (5% Of Materials Cost) B. Manpower: Number Of Hours 8.00 1.00 A. Construction Foreman 8.00 1.00 B. Skilled Laborer 8.00 2.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 1002(6) Cold Waterline Pipes And Fittings Quantity 1.00 I.s. Dpwh Standard Output Per Hour (oph)= 1.00 I.s 1.00 I.s. Cold Waterline Pipes And Fittings Direct Cost: A. Materials: 4.00 Lengths A.13 Mm Ø X 4.00 M (ppr) Pipe, Pn 20 10.00 Pcs B.13 Mm Ø Ppr Elbow - Threaded 4.00 Pcs C.13 Mm Ø Ppr Elbow 2.00 Pcs D.13 Mm Ø Ppr Coupling 4.00 Pcs E.13 Mm Ø Gate Valve 2.00 Pcs F.13 Mm Ø Ppr Union 8.00 Pcs G.13 Mm Ø Ppr Tee B. Manpower: Number Of Hours 6.65 1.00 A. Construction Foreman 6.65 1.00 B. Skilled Laborer 6.65 2.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 1002(5) Plumbing Fixture Quantity 1.00 I.s. Dpwh Standard Output Per Hour (oph)= 1.00 I.s. 1.00 I.s. Plumbing Fixture Direct Cost: A. Materials: 2.00 Set A. Water Closet With Complete Accessories 0.00 Set B. Urinal With Complete Accessories 2.00 Set C. Lavatory (wall Hung) 2.00 Set D. Floor Drain 2.00 Set E. Soap Holder (toilet Soap / Liquid Soap) 2.00 Set F. Toilet Tissue Holder/dispenser 2.00 Set G. Bidet 2.00 Set H.lavatory Faucet 2.00 M I. 38 Mm Stainless Steel Grab Bar 2.00 Sq.m. J. Facial Mirror (60cm X 60 Cm) B. Consumables (5% Of Materials Cost) B. Manpower: Number Of Hours 16.48 1.00 A. Construction Foreman 16.48 1.00 B. Skilled Laborer 16.48 1.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax) 1032(1)c Painting Works (metal Painting) Quantity 61.92 M2 Dpwh Standard Output Per Hour (oph)= 2.00 M2 61.92 I.s. Painting Works (metal Painting) Direct Cost: A. Materials: 0.05 Gal A. Red Oxide Primer 0.10 Gal B. Enamel Paint 0.25 L C. Paint Thinner D. Consumables (5% Of Materials Cost) B. Manpower: Number Of Hours 1.00 1.00 A. Construction Foreman 1.00 2.00 B. Skilled Laborer 1.00 1.00 C. Unskilled Laborer C. Equipment And Water: Number Of Hours Minor Tools (10% Of Labor Cost) Indirect Cost Contractor's Profit Overhead, Contingencies And Miscellaneous (ocm) Expenses Tax (vat/withholding Tax)

Details: The purpose of this consultation is the supply, delivery, unpacking, assembly, electrical connection, installation, according to the layout plans distributed in the appendix, the removal of packaging, after-sales service and the application of the guarantee of the furniture of the agora, on behalf of the University of Lille.

Description: Procurement Of Hardware & Electrical Supplies Pr# 2025-02-10-044, 2025-02-10-045, 2025-02-10-046, 2025-02-10-047, 2025-02-10-049 & 2025-02-10-050 , General Merchandise ,city Of Dapitan

Description: Hws Weiherhammer - Electrical engineering measures

Details: Description Republic Of The Philippines Department Of Public Works And Highways Capiz 1st District Engineering Office Km. 1, Roxas City, Capiz, Region Vi Invitation To Bid For Contract Id No.: 25gd0029 (rebid) Contract Name: Construction Of Multi-purpose Building, Barangay Santo Niño, President Roxas, Capiz 1. The Department Of Public Works And Highways Capiz 1st District Engineering Office, Through The Fy 2025 Gaa Intends To Apply The Sum Of Php 4,950,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Contract Id No. 25gd0029 (rebid) – Construction Of Multi-purpose Building, Barangay Santo Niño, President Roxas, Capiz. Bids Received In The Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Public Works And Highways Capiz 1st District Engineering Office, Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Multi-purpose Building, Barangay Santo Niño, President Roxas, Capiz Contract Id No. : 25gd0029 (rebid) Location : Barangay Santo Niño, President Roxas, Capiz Scope Of Works : Part B. Other General Requirements Part C. Earthwork Part D. Reinforced Concrete Part E. Finishing And Other Civil Works Part F. Electrical Part G. Mechanical Approved Budget For The Contract : Php 4,950,000.00 Contract Duration : 110 Calendar Days 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D For Small B. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. Per Gppb Resolution No. 15-2021, Prospective Bidders Are Required To Upload And Maintain Current Of The Following Eligibility Documents In The Philgeps: A. Registration Certification (sec/dti Registration) B. Mayor’s/business Permit Or Its Equivalent Documents C. Tax Clearance D. Pcab License And Registration, And E. Audited Financial Statements Any Expired Document Among The Afore-cited Eligibility Documents Shall Render The Philgeps Platinum Registration Certificate As Automatically Suspended And Its Validity Shall Resume Only Once The Said Expired Document Is Already Updated With The Philgeps. For Recently Expired Mayor’s Permit, The Recently Expired Mayor’s Permit Together With The Official Receipt As Proof That The Prospective Bidder Has Applied For Renewal Within The Period Prescribed By The Lgu Shall Be Accepted By The Philgeps For The Purpose Of Updating The Philgeps Certificate Of Platinum Registration And Membership. Consequently, The Prospective Bidders Shall Maintain An Updated And Current Philgeps Platinum Registration And Membership In The Civil Works Application (cwa). Prospective Bidders With Expired Eligibility Documents And Have Not Yet Updated Their Record In The Cwa Are Advised To Attach Their Newly Updated Platinum Registration And Membership Certificate, In The Technical Bid Documents And Not The Updated Particular Eligibility “class A” Document, To Be Considered Eligible By The Bids And Awards Committee. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways Capiz 1st District Engineering Office And Inspect The Bidding Documents At Procurement Unit, Km. 1, Roxas City, Capiz During Weekdays From 8:00 Am To 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 14, 2025, To March 06, 2025, From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 5,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Department Of Public Works And Highways Capiz 1st District Engineering Office Will Hold A Pre-bid Conference On February 21, 2025, At 10:00 A.m. At Bidding Room, Procurement Unit, Which Shall Be Open To Prospective Bidders. 9. Bid Submission May Be Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For The Manual Submission Or At Electronicbids_capiz1@dpwh.gov.ph For Electronic Submission On Or Before March 06, 2025, At 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On March 06, 2025, At 10:00 Am At Department Of Public Works And Highways Capiz 1st District Engineering Office, Bidding Room, Procurement Unit. Bids Will Be Opened In The Presence Of The Bidder’s Representative Who Chooses To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Department Of Public Works And Highways Capiz 1st District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Jonathan S. Oro Head, Bac-secretariat (036) 620-2533 Hanzel B. Samson Bac-chairperson (036) 620-0490

Details: Title: 200 Mm Wafer Prober Incl. Temperature Testing - Pr874550 description: 1 Piece. This Specification Describes The Requirements For A Wafer Probing System To Be Used For Characterization And Test Engineering For Sensor Ics At The Fraunhofer Iis. The System Must Allow Handling Of 200 Mm And 300 Mm Wafers. The Focus In The Usage Of The Machine Does Not Depend On Short Handling Time And High Throughput, But On Accuracy In Probing And Possibility For Stimulation Of Optical And Magnetical Sensors. For Stimulation Of Optical Sensors A Darkened Dut Chamber Is Mandatory. The Wafer Chuck Has To Be Made Off Non-magnetic Metarials To Prevent Distortion While Characterizing Magnetic Field Sensors. Options: 2.1 Installing Conditions Ac Voltage (prefered Specifications) 230 V 50 Hz, 16 A Fuse 3.3 Wafer Probing Optional: Wafer Thickness 200 Μm-1600 Μm 3.4 Wafer Probing Color Camera For Wafer Alignment Yes 4.2 Wafer Chuck Optional: Minimum Temperature -60 °c 5.5 Loading Optional: Wafer Id-reading For Text With Standard And Non-standard Fonts Rating: 100% For Yes, 20% For No 9.1 Electrical Interface And Remote Control Interface Gpib (ieee-488) Yes 13.1 Service After Expiration Of Warranty A Service Contract For At Least 3 Years Yes

Details: Description Lot No. Particulars Quantity/ Unit Specification Abc Project Duration Amount Of The Bidding Documents 1 Construction Of Multi-purpose Building With Solar Dryer- Tdif 2024 Supplemental Budget (location: Brgy. Dungos, Tulunan, North Cotabato) 1 Location: Brgy. Dungos, Tulunan, North Cotabato Building Dimension: 8m X 23m Solar Dryer Dimension: 20m X 30m (for Other Details, Please See The Attached Detailed Engineering Design Section Vii And Program Of Works Section Viii). Other Specifications: -barmm, Bta And Mafar Logo Must Be Included -all Electrical Shall Be Done Under Direct Supervision Of Duly Licensed Professional Electrical Engineer. -all Necessary Material Testing, Shop Drawings, As Built Drawings, Permits And Other Preliminaries Must Be Considered In Ocm Php 4,000,000.00 180 Calendar Days Php5,000.00 2 Construction Of Multi-purpose Building With Solar Dryer- Tdif 2024 Supplemental Budget (location: Brgy. Ladia, Sultan Kudarat, Maguindanao Del Norte) 1 Location: Brgy. Ladia, Sultan Kudarat, Maguindanao Del Norte Building Dimension: 8m X 23m Solar Dryer Dimension: 20m X 30m (for Other Details, Please See The Attached Detailed Engineering Design Section Vii And Program Of Works Section Viii). Other Specifications: -barmm, Bta And Mafar Logo Must Be Included -all Electrical Shall Be Done Under Direct Supervision Of Duly Licensed Professional Electrical Engineer. -all Necessary Material Testing, Shop Drawings, As Built Drawings, Permits And Other Preliminaries Must Be Considered In Ocm Php 4,000,000.00 180 Calendar Days Php5,000.00

Details: The Project Is For The Provision Of Compliance Certification And Remedial Works In Respect Of, But Not Limited To: • Domestic Gas Fired Heating Appliances And Central Heating And Water Heating Installations. • Communal/commercial Gas Fired Heating Appliances And Central Heating And Water Heating Installations. • Domestic Oil Fired Heating Appliances And Central Heating And Water Heating Installations. • Communal/commercial Oil Fired Heating Appliances And Central Heating And Water Heating Installations. • Microgeneration Installations. • Domestic And Communal Electrical Installations. • Life And Property Protection Installations (fire Alarms, Emergency Lighting, Disabled Refuge Alarms, Automatic Smoke Vents Etc). • Asbestos Surveys And Remediation Works. • Water Hygiene Including Legionnella Assessments. • Lifting Equipment (passenger Lifts, Stairlifts Platform Lifts And Fall Arrest Systems). • Environmental Installations. • Energy Performance Certification.

Details: Description Republic Of The Philippines Department Of Public Works And Highways Aklan District Engineering Office Region Vi Toting Reyes St., Kalibo, Aklan Invitation To Bid For Contract Id No.: 25ga0103 Contract Name: Completion Of Multi-purpose Building, Barangay Tagaroroc, Nabas, Aklan 1. The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan, Through The Fy 2025 Gaa Intends To Apply The Sum Of Php 1,980,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Contract Id No. 25ga0103 – Completion Of Multi-purpose Building, Barangay Tagaroroc, Nabas, Aklan. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Completion Of Multi-purpose Building Contract Id No. : 25ga0103 Locations : Barangay Tagaroroc, Nabas, Aklan Scope Of Works : Completion Of A Multi-purpose Building: The Scope Of Works Include The Construction Of Reinforced Concrete Floor Topping For The Existing Covered Court, End Wall Cladding, Flashing And Gutter, Fabrication And Installation Of Ten (10) Units Awning Type Windows With Bottom Metal Cladding, Masonry Works, Plastering And Painting Works, Side Canopy, And Electrical Works (electrical Rough-ins Only). Approved Budget For The Contract : P 1,980,000.00 Contract Duration : 90 Calendar Days 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D For Small B. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enrol In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. Per Gppb Resolution No. 15-2021, Prospective Bidders Are Required To Upload And Maintain Current Of The Following Eligibility Documents In The Philgeps: A. Registration Certification (sec/dti Registration) B. Mayor’s/business Permit Or Its Equivalent Documents C. Tax Clearance D. Pcab License And Registration, And E. Audited Financial Statements Any Expired Document Among The Afore-cited Eligibility Documents Shall Render The Philgeps Platinum Registration Certificate As Automatically Suspended And Its Validity Shall Resume Only Once The Said Expired Document Is Already Updated With The Philgeps. For Recently Mayor’s Permit, The Recently Expired Mayor’s Permit Together With The Official Receipt As Proof That The Prospective Bidder Has Applied For Renewal Within The Period Prescribed By The Lgu Shall Be Accepted By The Philgeps For The Purpose Of Updating The Philgeps Certificate Of Platinum Registration And Membership. Consequently, The Prospective Bidders Shall Maintain An Updated And Current Philgeps Platinum Registration And Membership In The Civil Works Application (cwa). Prospective Bidders With Expired Eligibility Documents And Have Not Yet Updated Their Record In The Cwa Are Advised To Attached Their Newly Updated Platinum Registration And Membership Certificate, In The Technical Bid Documents And Not The Updated Particular Eligibility “class A” Document, To Be Considered Eligible By The Bids And Awards Committee. Only The Following Documents Are Required From Prospective Bidders Prior The Sale Of Bidding Documents, To Wit: A. Company Id Or Any Government Issued Id B. Authorization Letter (if Not Authorized Liaison Officer In The Cwa, I.e. Special Power Of Attorney For Sole Proprietorship; Or Board/partnership/joint Venture Resolution With Secretary’s Certificate For Corporation/partnership/joint Venture/cooperative) C. Letter Of Intent (for Foreign Funded Projects) 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan And Inspect The Bidding Documents At Bac (conference Room), Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan During Weekdays From 8:00 A.m To 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 14, 2025 – March 6, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 5,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan Will Hold A Pre-bid Conference On February 21, 2025 At 10:00 A.m At Bac Conference Room, Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_aklan@dpwh.gov.ph For Electronic Submission On Or Before March 6, 2025 At 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On March 6, 2025 Immediately After The Deadline Of The Submission Of Bids At Bac (conference Room), Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh Aklan District Engineering Office (adeo), Kalibo, Aklan Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Maria Paula P. Garcia-custodio Oic – Procurement Unit (036) 268-3269 Email Add: Bactwgaklan@gmail.com Electronicbids_aklan@dpwh.gov.ph Ernan I. Bañes Bac Chairperson (036) 268-3269 Email Add: Bactwgaklan@gmail.com Electronicbids_aklan@dpwh.gov.ph