Development Academy Of The Philippines Tender

Description Project: Supply Of Supervision, Labor, Materials And Equipment For The Installation, Of Additional Cctv And Door Access Including All Other Accessories To Complete, Testing And Commissioning Of The Entire Cctv And Door Access System At Dap Building In Pasig City. 01. General Requirements: General: One Lot Supply Of Technical Expertise, Supervision, Labor, Tools, Materials And Commissioning For The: 01.1. Site Inspection For Validation Of Measurement And Other Works, Fill-up Site Visit Form Provided By Dap Engineering Office; 01.2. Clean/clear Haul Of Debris And Turn-over Including Restoration Of All Affected Areas; 01.3. Provide Manpower List , Work Schedules And Equipment List; And, 01.4. Submit Duly Prepared/ Signed/ Approved “records Drawings Or Plans” Complete With Legend, Technical Specifications And Measurement. All Production Plans Shall Be Done In Cad On A3 Size Sheet With An E-file Of Said Plans. 02. Scope Of Works: 02.1. Install And Commission The Additional 15-units Digital Cctv Surveillance Camera’s In The Floor 5a Area, 4a Area, 2a Area, Rooftop Area Basement Area And Mpc Perimeter Area Should Be Compatible To The Existing Cctv: Specified Location: • Additional Cctv Camera: - Camera 1: Location 5a Area Facing Main Door Beside Elevator. - Camera 2: Location 4a Area Facing Main Door Beside Elevator. - Camera 3: Location 2a Area Facing Main Door - Camera 4: Location 2a Area Facing Conference Room. - Camera 5: Location 2a Area Facing Drdo Office & Dsm Office Main Door. - Camera 6: Location 2a Server Room - Camera 7: Location Rooftop Area Igh Coffee Shop. - Camera 8: Location Rooftop Area Facing Main Door Igh Multi Media Room. - Camera 9: Location Rooftop Area Facing Main Door Igh Learning Center. - Camera 10: Location Rooftop Area Inside Igh Multi Media Room - Camera 11: Location Rooftop Area Avr Veranda Facing San Miguel Ave. - Camera 12: Location Basement Area Facing Mv Pool Office And Motor Pool Area. - Camera 13: Location Basement Area Facing Electrical Room And Genset Room. - Camera 14: Location Mpc Parking Area Facing Mpc Gate And Former Ama School. - Camera 15: Location Perimeter Area Planting Area. 02.1.1. Specification Of Camera’s ; 02.1.1.1. 4-units Ip Outdoor Type Camera: 02.1.1.2. 11-units Ip Indoor Type Camera: (a) Lens-6.0mm; (b) Infrared Range 1 To 30 Meters; (c) Image Sensor-3mp; (d) Max. Image Resolution 1080p; (e) Network-ip; (f) Power Source- 12vdc Poe(802af); And, (g) Preferably Same In The Existing Camera’s. 02.2. Install And Commission The Additional 6-units Door Access System To Be Install In Floor 2a Main Door, 2a Server Room, 3a Cash Office, 3b Registrar Office, 5b Ictd Office And Ighlc Sliding Door At Rooftop Area Should Be Compatible To The Existing Door Access System: • Additional Door Access : - Door Access 1: Location 2a Floor Main Door. - Door Access 2: Location 2a Server Room Door. - Door Access 3: Location 5b Area Ictd Main Door. - Door Access 4: Location Rooftop Are Main Door Igh Learning Center Sliding Door. - Door Access 5: 3a Area Cash Office. - Door Access 6: 3b Area Registrar Office. 02.2.1. Specification Of Door Access; 02.2.1.1. 6-units Door Access: (a) Poe Falco Controller With Panel; (b) Drop Bolt; (c) Door Contact; (d) Reader In/out; (e) Emergency Break Glass; (f) Push Button; (g) Power Source- 12vdc Poe(802af); And, (h) Preferably Same In The Existing Camera’s. 02.3. Replace The Defective 2-units Door Access At Main Lobby 5b And 1a. 02.4. Replace The Defective 8-units Cctv System. • Cctv Cameras Location For Replacement Due To Deffected Unit: - Camera 1: Location 6a Area Facing Op Hall Way. - Camera 2: Location 5a Lobby Area - Camera 3: Location 4a Lobby Area - Camera 4: Location 3a Cash Office Area - Camera 5: Location 2a Area Beside Elevator - Camera 6: Location 1a Fire Exit Door Area Bldg. A - Camera 7: Location 3a Area Beside Elevator - Camera 8: Basement Area Staff Quarters. 02.5. Transfer Door Access From 6a Former Security Room To 3a Security Room. 02.6. Supply Conduit, Structure Cabling, Roughing-in Pvc Conduit And All Other Accessories Needed To Completion Of The Said Project. 02.7. Supply, Install And Commission The Display Monitor 23” Led And 1 Unit – 1 Kva Ups; 02.8. Supply, Install And Commission The 1-unit Poe Switch 24-port Preferably D-link Dgs-1210-28p To Match The Existing Device; 02.9. Preventive Maintenance Of Existing 25-units Cctv Cameras And All Other Accessories; 02.10.supply, Install And Commission The 2-units 4tb Hard Drive For Nvr Server; 02.11.train The Security Personnel In The Use Such As Monitoring, Searching, Recording And Creation Of Back-up Footages Of The Pc Server And 02.12.commission And Turn-over The Units For Acceptance. 03. Cleaning / Clearing / Hauling And Turnover: 03.1. Restore To Its Original Condition Any Facilities And Areas That Has Been Damaged Due To Accidents Arising From Installation. 03.2. Clean The Areas Before Turn-over; And, 03.3. Turn-over The Entire Project For Acceptance To Dap Engineering Office 04. Post-installation Documents: Submit The Following Documents For Final Inspection And Reference Purposes. 04.1. Original Copy Of “record Drawings / Plan” Complete With Legend, Technical Specifications, Test Results And Measurements; And, 04.2. Certification From The Contractor Specifying Warranty Of At Least One (1) Year; And, 04.3. Project Duration Should Be Forty Five (45) Calendar Days From The Date Purchase Order Is Conformed By The Contractor. 05. Other Requirements: 05.1. All Work-details, Plans, Lay-outs, And Schedule Should Be Submitted And Approved By The Dap Engineering Office Before The Contractor Begins To Work; And, 05.2. Submit Hard And Soft Copy Of Before, On-going And After Pictures