DEPARTMENT OF LABOR AND EMPLOYMENT REGION V Tender

Description 2 Unit Air Compressor Machine: Motor Power: 2hp; Speed: 1050rpm; Air Delivery: 250l/min; Working Pressure: 115 Psi/8 Bar; Tank: 100l; Size: Approx. 935x385x800mm; Net Weight: About 90kg 2 Roll Air Compressor Hose: 20m Long; Hose Diameter: 1/4" Up To 150psi; Material: Polyurethane 2 Pc Braker Bar: Drive Size:1/2", Length: Atleast 10"; Material: Chrome Vanadium Steel; Rotes: 180° 2 Set Pliers Tools Set: Material: Chrome Vanadium Steel, Alloy Steel; Handle Material: Thermoplastic Rubber; Item Weight: Atleast 790 Grams; Inclusions: Atleast 8" (length) Combination Pliers, 6" (length) Diagonal Cutting, 6" (length) Long Nose Pliers 2 Pc Dead Blow Hammer: Item Approximate Dimensions: 28-30cm (l) X 10-12cm (w) X 6cm (h); Weight: About 995g; Handle Material: Fiberglass; Head Forged Impact: 2lbs 2 Unit Impact Wrench: Battery Voltage: 18v; Weight W/out Battery: Approximately 1.02 Kg; Torque: Max-160 Nm; No-load Speed: 0-2,800 Rpm; Impact Rate: 0-3,600 Bpm; Tool Holder: 1/4'' Hex Uni, Screw, Diameter: M6 – M14; Vibration Emission Value Ah: 9.5 M/s²; Uncertainty K: 1.5 M/s²; Vibration Emission Value Ah: 9.5 M/s² 2 Pc Oil Filter Wrench: Product Material: Crv Steel; Size: About 8" Long; Scope Of Application: 55/75mm; Rubber Coated Handle; Adjustable Handcuff 2 Pc Vice Grip Pliers: At Least 7" Long; Straight Jaws; Jaws Capacity: 1 1/2 Inch (maximum), Built-in Wire Cutter; Forged Steel; Adjustable Screw 3 Set Pick Set: 4pcs/set, Material: Steel; Handle Material: Plastic; Overall Length: Approx. 5.38"; Inclusions: Straight Pick- Approx. 6-9" (l), Full Hook - Approx. 6-9" (l), 90°- Approx. 6-9", 45° - Approx. 6-9" 4 Set Tire Iron Spoon/tire Changer Wrench: At Least 12" Long; Material: Metal Steel (2 Pcs Per Set) 2 Set Punch Chisel Set: Material: 40cr, Plastic Powder Coated; 6pcs Per Set (3pcs Pin Punch 3x10x150mm, 5x10x150mm, 8x12x150mm, 3pcs Nail Punch 3x10x150mm, 5x10x150mm, 8x12x150mm) 2 Set Ratchet And Socket Set: Material: Steel; Inclusions: 20 Pieces 1/2" Point Sockets1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 19/32, 5/8, 11/16, 3/4, 25/32, 13/16, 7/8, 15/16, 31/32, 1, 1-1/16, 1-1/18, 1-3/16, 1-1/4; 6 Pieces 1/2" Accessories Extension Bar - 5", Extension Bar - 10", Spark Plug Socket 6 Pt. 13/16", Sliding T-bar 10" With Molded Plastic Case 2 Set Screwdriver: Cushion Grip Screwdriver; Magnetized Tip For Easy Pick-up Of Screws, 6 Pcs (slotted/standard 6mm X 150mm, Slotted/standard Parallel 5mm X 100mm, Slotted/standard Parallel 3mm X 100mm, Slotted/standard Parallel 5mm X 150mm, Ph2 X 150mm, Ph1 X 100mm) 2 Pc Tire Pressure Gauge: Material: Brass; Size: Approx. 26x5.5x3.5cm/10.2x2.2x1.4" (lxwxh); 100psi; 2" Dial, 360degree Swivel Chuck 2 Pc Torque Wrench: 1/2"; Material: Nickel-chromium Alloy Steel; Surface Treatment: Mirror Finish; Attribute: 28-210nm; Weight: About 1.7kg; Length: About 470mm; Adjustable 2 Set Wrench Set: Weight: Approx. 3.8kg; Material: Chrome Vanadium Steel; Inclusion: 8mm,9mm,10mm,12mm,13mm,14mm,17mm, 19mm,21mm,22mm, 24mm, 27mm, 30mm, 32mm 2 Pc Oil Drain Pan: Material: Polypropylene; Round-shape: Dimension: Approx. 22.7 X 6" Capacity: 15l; Weight: About 2.2 Lbs 2 Unit Hydraulic Jack: Material: Alloy Steel; Load Capacity: 6 Tons; Size: Minimum Height: 227mm; Lifting Height: Atleast 140mm; Adjustable Height: Atleast: 60mm; Unit Weight Approx. 4.6kg 2 Set Jack Stand: 2 Pcs Per Set, Color: Red With Black; Capacity: Up To 6,600 Lbs (3tons); Minimum Height: 12-3/16"; Maximum Height: 16-3/4"; Adjusts From 12-3/16" X 6-7/8"; Material: Heavy Duty Steel Body 2 Pc Tool Box: Material: Polypropylene; Weight: About 1390g; Max Load: 15kg; Product Dimension: (lxwxh) 44x23x21cm; With Plastic Lock 2 Set Digital Multimeter: Item Dimensions: ‎2" (l) X 10" (w) X 5" (h); Item Weight: ‎0.5 Pounds; Batteries: ‎1-aaa Batteries; 10 Megohm Input Impedance; Inclusions: Attachable Test Leads, Holders And Stand 2 Pc Mechanic's Stethoscope: Cylinder-shaped Engine Analyzer; Material: Rubber, Plastic And Stainless Steel; Probe Length: Approx. 300mm; Probe Diameter: Approx. 3.3mm; Weight: About 110g; Detection Frequency: 10hz-10khz; 2 Pc Scan Tool/code Reader: Display:128x64 Pixel Display; Operating Temperature: 0-60degreee C; Storage Temperature: -20-70degree C; External Power: 8.0 To 15.0 Volts Provided Via Vehicle Battery; Dimensions: Approx. 28x18.5x5cm; Weight: About 0.34kg 2 Unit Tire Vulcanizing Machine: Automatic Temperature Adjustment; Steel Material; Voltage: 220v; Power: 500w; Vulcanizing Time: 7 Minutes; Dimension: Screw Diameter: 27mm (l) X 295mm (w), 410mm (h), Wieght: 7.5kg 2 Unit Hydraulic Bottle Jack: Material: Alloy Steel; 2 Tons Capacity; Minimum Height: 148mm; Maximum Height: 251-300mm; Lifting Height: 80mm; Adjusting Height: 50mm; Net Weight: About 2.1kg 1 Unit Tire Changer Machine: Power Supply 220v/60hz/1hp; Clamping Cap. Outside Rim Dia: 10"-24"; Clamping Cap Inside Rim Dia: 12"-26"; Rim Width: 3"-5"; Max Wheel Diameter: 1040mm; Air Required: 8-10 Bar; Power Consumption: 1.1kw; Work Temperature: 0-45°c; Weight: 350kg 1 Unit Industrial Drill Press: Power Supply Voltage: 220 V; 6.2amp Motor Induction, 2,800 Rpm, Motor Power 1.5hp Weight: 6.5 Kg; Maximum Clamping Capacity: 13 Mm; Package Size:18.90 * 11.42 * 5.91 Inch 1 Unit Metal Cut-off Machine: Voltage: 220v-240v~50-60hz; Input Power: 2400 W; Blade Size:355x25.4x3mm; No-load Speed: 3900rpm; Max. Cutting Capacity:100mm In Round Pipe; 100x100mm In Square Steel; 120x100mm In Rectangel; Max. Cutting Steel Bar:50mm 2 Pcs Scissors: Material: Forged Steel; About 10" Long, Max.cutting Thickness:carbon Steel 0.8mm, Stainless Steel: 0.6mm (forge Steel Body And Handle)