Department Of Agriculture Tender

Description Supply And Delivery Of 10 Units Corn Sheller Abc: P2,300,000.00 Specifications: A. Engine - Rated Power: 8.9 Kw, Minimum - Single Cylinder, Diesel Engine, Four Stroke Cycle - Cooling System: Water-cooled - Continuous Power: At Least 85% Of The Rated Power - Specific Fuel Consumption At Maximum Output Power: 350g/kw-hr, Maximum - Starting System: Manual Cranking B. Design And Performance - Capacity, Minimum: 2.5 Tons/hr @ 18-20% Mc - Shelling Recovery: 97%, Minimum - Shelling Efficiency: 99.50%, Minimum - Mechanically Damaged Kernel: 3%, Maximum - Net Cracked Kernel: 5%, Maximum - Purity: 98%, Minimum - Losses (maximum) O Blower Loss: 1.0% O Separation Loss: 1.0% O Unshelled Loss: 0.5% O Scattering: 0.5% C. Classification - Mobility: With Two (2) Brand New Pneumatic Tires (manufactured Not Earlier Than 2024) - Cleaning Component: Fan/blower And Sifter - Method Of Feeding: Hopper-fed Type - Materials And Other Components Shall Be Brand New D. Accessories - Shall Provide Fuel During Inspection, Testing And Training - With Engine Oil In Every Unit - With Set Of Standard Tools A) 1 Set Of Combination Wrench (size: 8-22mm, Minimum) B) 1 Piece Grease Gun (100cc, Minimum) C) 1 Pair Of Mechanical Pliers (size: 8-inch, Minimum) D) 1 Piece Each Or Combination Of Philips And Flat Screw Driver - With Pulleys, Belts, Belt Dressing, Engine Oil And All Other Accessories - With Original Operator's Equipment Manual E. Other Requirements - With Da Logo (all Weather Type Sticker-vinyl Sticker, 10 Inches In Diameter) - With Amtec Test Result For Machine - With Amtec Test Result For Engine Alone - With Namdac Certificate - With Pto Certificate By Bafe - Specification Should Signed And Sealed By An Abe With Valid Prc Id And Ptr - Should Have Service Center Within The Region 12 - The Technician Of The Mfaddies And Or Its Accredited Service Center Must Have A Tesda National Certificate Ii (nc Ii) Relevant To The Job Or An In-house Training - No Reported Major Breakdown For Products Under Warranty In The Last 72 Hours Upon Receipt Of Complaint/s - Control Instructions And Label Of The Machine And Engine Should Be In English - Must Conduct Training In Operation And Maintenance Of Recipient/s F. Warranty - One (1) Year For The Machine And Two (2) Years For The Engine Note: All Units Shall Be Inspected @ Da-tupi Res, Including The Conduct Of Acceptance Testing & Operations And Maintenance Training To The Recipient. Units Must Be Delivered To The Recipients (see Annex A) After The Conduct Of Operation And Maintenance Training. Delivery Period: 30 Calendar Days Delivery Sites: Tupi Res, Bololmala, Tupi South Cotabato - Cost Of Bidding Documents: P5,000.00 Note For Prospective Bidders: 1. During Buying Of Bidding Document: Must Submit Letter Of Intent (loi) And Present The Following Eligibility Document: A. Certificate Of Registration From Philgeps (platinum Membership) B. Registration Certificate From Sec/dti/cda C. Mayor/business Permit D. Tax Clearance 2. In Case Of Representative: Must Submit A Copy Of Board Resolution Or Secretary’s Certificate/special Power Of Attorney Whichever Is Applicable Coupled With Specimen Signature.