Crane Tenders

Details: Auction Sale Of Movable Property - Plant & Machinery Containing Swiss Make Sulzer Rapier Looms Model - G6200 (30 Nos.), Sectional Warping Machines Kcp Lc (1 Nos.), Cone Winding Machine - 24 Spindle (4 Nos.), H Plant Complete Ducting Set, Electric Distribution Panel, Electric Servo, Sudhir Gen Set - 380 Kva (1 Nos.), Passengers-cum-goods Lift - 1 Ton (1 Nos.), Screw Compressor 11.7.5 (1 Nos.), Gantry Crane (1 Nos.), Etc. Installed At Pe 25, Village Nichi Mangli, Chandigarh Road, Ludhiana. (liability Charge For Canara Bank)

Details: Planning, Designing, Construction and Commissioning of 200.00 Square meter substation building, Supplying & fabricating of 600 mm dia. 5 Nos. Rising main manifold pipe line (Zone I, zone II, Zone III, Zone IV and Rahamatnagar OHR) total length approx. 40.00 meter and gaseous chlorination system by 2 X 10 kg per hour (1 W + 1 SB) auto cum manual with chlorinator accessories, chlorine analyser, S/F of four number tonner each of 1000 kg capacity, safety kit and allied accessories, restoration of crane as necessary all complete at Ismile pump House under AMRUT (Phase III) within Asansol Municipal Corporation.

Description: Pl No: 98050126. Condemned And Unserviceable Ferrous Melting Scrap Consisting Of Axle Boxes, Axle Box Housings, Side Buffer Plungers, Buffer Casings With/without Spindle, Knuckles And Coupler Yokes For Cbc,end Shields,control Arms,connecting Rods Of Sorts And Sizes, Bmbc Components ,side Bearer Covers,gear Wheels Of Sizes,blower Covers,screw Couplings And Its Link Parts, Bearing Cover Casings,grease Collors,tensioning Rods,anchor Links With Or Without Silent Blocks, Brake Shoes With Or With Out Brake Blocks, Draw Hooks, Draw Beams,draft Keys,iron Pullies,protective Tubes, Pipes Of Sorts And Sizes,cam Shafts And Crank Shafts Of Sorts And Sizes With/without Original Attachments, Fly Wheels,center Pivot Male Parts, Spacers,sims,washers,rocker Arms,bolts,nuts, Stuts,pins, Brakets,brake Shoe Keys, Metal Rings, Rods Of Sorts And Sizes, Cotter Pins, Small/broken Coil Springs, Hanger Blocks, Iron Balls Of Roller Bearings Ans Its Inner And Outer Spacers, Cbc Couplers With Or Without Rubber,huck Bolts,huck Bolt Tails,linear Rings,hhp Pistons,traction Rods,25kw Rotor Alternators,fan Blade Housings,buffer Face Plates,traction Motor End Shields, End Locking Screws,guide Assemblies,bearing Racers,side Rubber Bearer,knuckles, Blower Casings, Locking Plates, Bearing Adapters, Dresser Couplings , Msu Tubes, Shim Plates, Angle Cocks, Valves Of Sorts And Sizes ,bearings Of Sorts And Sizes , Connection Strips,forged Components, Brake Cylinders, Turbo Casings, And Other Similar Items Melting In Nature.note: 1] Crane Loading Is Permitted. 2] If Any Non Ferrous Items Found, Should Be Removed.

Details: N0016425rjr93 – Maintenance (replacement) Of Batteries And Microchips In The Firing Devices Mk 59 Mod 0 And Mk 62 Mod 0 And Assembly Of New Production Mk 59 Units – Psc 1375 - Naics 325920 issue Date: 4 December 2024 – Closing Date: 3 January 2025 – Time 2:00 Pm Eastern the Naval Surface Warfare Center (nswc), Crane Division Anticipates Issuing A Request For Proposals (rfp) For A 5-year, Firm-fixed Priced (ffp), Indefinite Delivery/indefinite Quantity (idiq) Contract For The Maintenance (replacement) Of Batteries And Microchips In The Firing Devices Mk 59 Mod 0 And Mk 62 Mod 0 And Assembly Of New Production Mk 59 Units. the Resulting Award Has A 5-year Ordering Period With An Estimated Minimum Contract Quantity Of 300 Each New Production Mk 59 Mod 0 Devices As Well As An Estimated 500 Each Mk 59 Mod 0 And Mk 62 Mod 0 Refurbishment And A Contract Ceiling Of Approximately $23,300,000. Deliveries Shall Be Fob Destination To Nswc Crane. Initial Inspection Will Be Performed By Dcma At Origin For First Articles And Lot Acceptance Test Units And Acceptance Will Be Performed By Government At Destination, Nswc Crane, Crane In 47522. the Draft Technical Data Package (dtdp) Is Posted As An Attachment To This Synopsis. The Dtdp Contains Specifications, Automated Data Lists (adls) With Drawings, And Contract Data Requirements List (cdrls). The Dtdp Is Being Provided For Comments/questions Prior To Solicitation Issuance; All Comments/questions Shall Be Received By 20 December 2024 Prior To The Estimated Solicitation Date Of 10 January 2025. this Is A Full And Open Competitive Acquisition. The Final Contract Award Decision May Be Based Upon A Combination Of The Following Factors As Described In The Rfp: Technical, Past Performance, And Price. The Government Intends To Award To The Responsible Vendor Whose Offer Is The Best Value To The Government. Offers That Are Non-compliant With Any Material Requirement Of This Solicitation May Be Rejected Without Further Consideration For Contract Award. the Solicitation, All Amendments And Associated Controlled Documents Will Be Posted On Procurement Integrated Enterprise Environment (piee) Solicitation Module (psm) At Https://piee.eb.mil. The Solicitation Notice Will Flow To Sam.gov, But The Actual Posting Will Be In Piee. The Proposal Shall Also Be Submitted Through Psm. All Changes That Occur To Competitive Actions Prior To The Closing Date Will Be Posted To Contract Opportunities On Https:/sam.gov/ Via Psm. For Within Scope Changes Made After The Closing Date, Only Those Offerors That Provide A Proposal Will Be Provided Any Changes/amendments And Considered For Future Discussions And/or Award. information Regarding How To Set Up A Vendor Registration Is Included In This Link: Dod Procurement Toolbox Https://dodprocurementtoolbox.com/site-pages/solicitation-module. Choose Vendor Access Instructions. further Training Is Available At This Link: Https://pieetraining.eb.mil/wbt/xhtml/wbt/sol/index.xhtml. contractors Must Be Properly Registered In The System For Award Management (sam) And The Joint Certification Program (jcp) In Order To Receive The Controlled Attachments. Offerors May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 1-866-606-8220 Or Via The Internet At Https://www.sam.gov. Information About The Jcp Is Located At Https://public.logisticsinformationservice.dla.mil/publichome/jcp/default.aspx . The Controlled Attachments Will Be Posted At The Same Time The Solicitation Is Posted. questions Or Inquiries Should Be Directed To Shawna Gainey, Code 0232, Telephone 812-227-9623, E-mail: Shawna.y.gainey.civ@us.navy.mil. Please Reference The Above Solicitation Number When Responding To This Notice.

Description: 98050126: Cond. & U/s. Ms/ci/gi And Scrap Consisting Of Grs Full Box, Grs Half Box,atvm Box,relay Pannel Box,bars,ms Rod/angle/ Channel/pipe,cut Pieces Of Ms Flat, Bm Box, Pipe Fittings, Coupling Hook,tension Rod, Plate, P/m Cover,ms Cylinder,door Broken Parts, Ms Stand, Slide Cover,ms/gi Nut, Bolt,lock Nut,clamp,washer,l C Gate Parts And Tap,mast,ms/gi Telephone/light Pole,gate, Valve, Cover Hook,telecom High Mast Mini Tower Pieces,universal Axle Counter Box,axle Counter Base Plates,gear Case, Flat Rod, Rottery Key, Grill, Fencing,ladder, Battery Boxes, Frames, Ms Boxes, Ring, Ct Boxes,ground Connection,beaters Angle Different Sizes,da Box,d Bracket,stay Adjuster,battery Stand,rack,ci Components ,ladder Platform,cls /signal Post With Or Without Base,buffer Case,buffer Plunger, Foot Step,brake Beam,ms Bond,cut Off Angle Cock ,gravity Cock, Flushing Valve,door Closser,surface Base,shock Absorber,beam,ms Tank And Such Other Similar Ms Items With Or Without Non Ferrous And Other Attachments As Is Where Is Condition. Note: (1) If Any Non- Ferrous Items Found In Loose In The Location To Be Handed Over To Custodian At The Time Of Delivery, (2) Crane/jcb Loading Permitted (3) Cutting Permitted To Loadable Size At The Time Of Delivery (4) Electronic Weighbridge Capacity 30 Mts Only. Hence Purchaser Should Bring Suitable Vehicle So That The Loaded Weight Should Not Exceed 28 Mts At The Time Of Delivery. Location: In Two Location (1) Bin W-42 & (2) W -48, Below Camera Post Of Scrap Yard/ssd/ptj.

Details: N0016425snb22– Request For Information(rfi)/sources Sought – Fabrication, Assembly, Inspection, Test And Delivery Of Transport Trailers – Psc 2330 – Naics 33612 issue Date: 17-december-2024 - Closing Date: 14- January - 2025 rfi/sources Sought: the Intent Of This Notice Is To Identify Potential Offerors And To Measure Interest From All Viable Sources. The Naval Surface Warfare Center, Crane Division Contracting Department, Crane, Indiana Is Currently Seeking Potential Sources For A Firm-fixed-price Contract For The Acquisition Of Two Transport Trailers. Nswc Crane Is Tasked With Procurement Of The Two Transport Trailers To Support Future Fielding Requirements. The Trailers Include The Following Components: Flatbed Trailer, Environmental Control Unit (ecu), Bulkhead, Roll Tarp, And Stands That Elevate The Payload. An Air Transportability Test Loading Agency (attla) Certification Will Be Required Prior To Delivery. The Government Has A Requirement For The Fabrication, Assembly, Inspection, Test And Delivery Of Transport Trailers And Is Accepting Information Regarding Capabilities From Companies Potentially Capable Of Meeting The Requirements As Described Above. All Items Will Be Delivered To Naval Support Activity (nsa Crane), Crane, Indiana. In Accordance With Federal Acquisition Regulation (far) 15.201(e), The Government Is Issuing This Rfi/sources Sought Announcement As Part Of Market Research. The Naval Surface Warfare Center, Crane Division (nswc-crane) Is Seeking Information For Market Research Purposes To Acquire Two Transport Trailers. All Work To Be In Accordance With All Applicable Federal, State, And Local Laws, And Regulations. the Anticipated Term Of The Contract Will Be A Six Month Period Of Performance. The Scope Of The Work Anticipated Is Fabrication, Assembly, Inspection, Test And Delivery Of Transport Trailers. the Naics Code For This Solicitation Is 33612, Trailers And The Psc Code Is 2330. The Small Business Size Standard Is 1,500 Employees. the Intent Of This Source Sought Announcement Is To Seek Response And Capabilities Statements From Parties That Are Able To Perform The Necessary Work. as Permitted By Far Part 10, This Is A Market Research Tool Being Utilized For Informational And Planning Purposes. Your Responses Will Assist The Government In The Development Of Its Acquisition Strategy For A Possible Solicitation, To Be Issued At A Later Date, And In Determining Whether Any Type Of Small Business Set-aside Is Possible For This Procurement Or Whether Full And Open Competitive Procedures Should Be Utilized. this Is A Sources Sought, And Shall Not Be Construed As A Rfq Or As Any Commitment Or Obligation On The Part Of The Government To Issue A Solicitation. The Government Does Not Intend To Award A Contract On The Basis Of This Request For Interested Sources, So Proposals Will Not Be Considered. No Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Sources Sought Or Any Follow-up Information Requests. The Gov Intends To Solicit For The Services Described In The Attached Draft Statement Of Work On Or Around April 5th 2025. response Is Strictly Voluntary. It Is Not Mandatory To Submit A Response To This Notice To Participate In Any Formal Rfp Process That May Take Place In The Future. However, It Should Be Noted That Information Gathered Through This Notice May Significantly Influence Our Acquisition Strategy, And All Interested Parties Are Strongly Encouraged To Respond. interested Parties Are Requested To Provide The Information That Identifies Its Capability To Provide The Fabrication, Assembly, Inspection, Test And Delivery Of Two Transport Trailers Described Herein. Please Provide Information Of Performance On Other Government Contracts With Similar Efforts As Applicable. The Government Encourages Participation By Small Business, Small Disadvantaged Business, Hub Zone Small Business, Woman-owned Small Business, Veteran-owned Small Business, And Historically Black Colleges And Universities. interested Parties Must Be Properly Registered In The System For Award Management (sam) And May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 1-866-606-8220 Or Via The Internet At Https://www.sam.gov. submission Instructions: Responses Shall Be Sent To Benjamin Harrison At Benjamin.k.harrison2.civ@us.navy.mil. Phone Calls Will Not Be Accepted. Responses Are Due No Later Than 4 Pm (eastern Time), January 31, 2025, And Must Include The Information Requested Below. This Is Strictly Market Research And The Government Will Not Entertain Any Questions. The Capability Packages Are Not Expected To Be Proposals, But Rather Statements With Background Information Supporting The Company's Existing Experience In Relation To The Attached Draft Statement Of Work. All Information Is To Be Submitted At No Cost Or Obligation To The Government. All Submitted Information Will Not Be Disclosed Outside Of The Government. Respondents Will Not Be Notified Of The Results Of The Market Research Evaluation. Firms Shall Submit A Capability Statement, Indicating Interest, On Company Letterhead Demonstrating The Firm’s Qualifications To Perform The Defined Work In The Attached Statement Of Work. Responses Must Be Complete And Sufficiently Detailed To Address The Specific Information. Submissions Shall Not Be Any More Than 3 Pages, 10-point Font, In Either Microsoft Word Or A Pdf Format. We Appreciate Your Interest And Thank You In Advance For Responding To The Sources Sought. The Documentation Shall Address, At A Minimum, The Following: a. Company Profile Information: 1. Company Name And Address; 2. Affiliate Information: Parent Company, Joint Venture Partners, And Potential Teaming Partners; 3. Year The Firm Was Established And Number Of Employees; 4. Two Points Of Contact (names, Titles, Phone Numbers And Email Addresses); 5. Unique Entity Identification Number And Cage Code, As Registered In The System For Award Management (sam) At http://www.sam.gov/: any Future Successful Offeror Resulting From A Solicitation, Must Be Registered In The System For Award Management (sam) Database Prior To Contract Award. Offerors Not Already Registered In The Sam Database Are Highly Encouraged To Do So Via Internet At: Http://www.sam.gov. Registration In Sam Is Free. 6. Small Business Designation/status (must Correlate With Sam Registration), If Applicable: small Business, Hubzone, Wosb, 8(a), Vosb, Sdvosb, Small Disadvantaged Business not A Small Business Under Naics 336120 (average Number Of Employees Greater Than 1,500). b. Capability Statement: capability Statements Must Clearly Indicate How Your Firm Is Able To Provide The Services Listed In The Draft Sow, And Should Address The Following: - Ability To Provide The Services Listed In The Attached Draft Statement Of Work. - Clear And Comprehensive Information Supporting Your Experience And Expertise, Including Statements Regarding The Knowledge And Understanding Of The Functional And Technical Knowledge/experience Directly Related To Tasks Outlined In The Sow. - A Statement That Sufficient Resources Are On Hand And Available To Begin Work On The Effort, Or An Ability To Procure The Required Resources To Begin Work. - A Statement Of Relevant Experience And Past Performance Similar To The Defined Statement Of Work Within The Past 3 Years. - A Statement Of Relevant Company Experience, Demonstrating Work Experience Similar In Nature, Scope, Size, Complexity, And Difficulty As That Described In The Statement Of Work. - Any Other Relevant Information, Such As Teaming, Business Relationships, Or Joint Venture Partners That Provide A Benefit In Providing The Services Defined In The Statement Of Work. a Draft Statement Of Work Is Attached For Your Information. This Document Is Not In Final Form And Is Subject To Change. this Sources Sought Is Being Issued For Planning And Market Research Purposesonly. This Is Not A Solicitation. Responses To This Notice Are Not Considered Asoffers And Cannot Be Accepted By The Government To Form A Binding Contract. Thegovernment Is Not And Will Not Be Responsible For Any Costs Incurred Byinterested Parties Responding To This Sources Sought. please Reference Announcement Number: N0016425snb22 In Your Correspondence.

Description: 1]sc. Gauging Machine, M/c Code- N/264, Make- Esab, Location -girder Shop,2] Sc. Compressor 1000 Cfm Atlas Copco Make, , M/c Code- N/244, Make- Atlas Copco, Location - Power House. 3] Sc. Compressor 500 Cfm, , M/c Code- N/237, Make- Broom Wade, Location -power House. 4] Sc. Diesel Generator Set, , M/c Code- N/254, Make- Sanjay Diesels, Location - Guarage, 5] Sc. Mega Therm Arc Furnace 5 T Cap, M/c Code-n/163, Make- Megatherm, Location- Central Stores. 6] Sc. Drill Machine Model Dh 24, M/c Code-41, Make- Hmt, Location- Wagon Shop. 7] Sc. Shearing Machine, M/c Code-187, Make- Na, Location- Wagon Shop. . 8] Sc. Airless Spray Painting Machine Tigger 30.150, M/c Code-8, Make- Na, Location- Wagon Shop. 9] Sc. Compressor 1000 Cfm Atlas Copco Make, M/c Code-n/247, Make- Atlas Copco, Location- Foundry. Condition-1. Pulley Train Arrangement, General Accessories & Any Other Loose Ferrous And Nonferrous Items Are Exclusive Of The Main Machine And Are Not Allowed For Lifting By The Purchaser. 2. Picking And Choosing Of Materials Near The Machine Is Not Allowed.3. Purchaser Has To Make His Own Arrangement For Lifting And Taking Delivery Of The Machine.4. Custodian May Allow Purchaser To Bring Crane If It Is Required And Justified.5. The Complete Machine Will Be Sold On "as Is Where As "basis.6. Machine Will Be Delivered As Per Nomenclature.7. Digging Is Allowed If Required And Justified For Delivery Purpose But The Railway Land Is To Be Leveled And Cleaned Before Taking Delivery Of The Sold Machine, 8. Cutting/dismantling Of Machine Is To Be Done In Such A Way So That No Adjacent Machine, Structure, Installation Or Machine Accessories Etc. Get Affected In Any Way.

Description: Amendment 0002: this Amendment Is To Clarify That Vendor(s) May Provide Alternate Part Numbers For Government Review /consideration And Must Provide Manufacturer Data Sheets If Providing Any Alternate Parts. An Amended Statement Of Work Is Being Added To Include Gfp Information And Gfp Clauses 52.245-1, 252.245-7003, And 252.245-7005 Have Been Added. The Closing Date For This Solicitation Has Been Extended To 1/10/2025. No Other Changes Have Been Made. amendment 0001: this Amendment Is To Include Addtional Draw Ing 3392as1854-2. The Closing Date Of The Solicitation Is Extended To 12/20/2024. No Other Changes Have Been Made. original Posting: n0016425q0018 – Circuit Card Assemblies - Fsg 5998 - Naics 334418 issue Date 14 Nov 2024 – Closing Date 13 Dec 2024 – 4:00 Pm Eastern Time naval Surface Warfare Center (nswc) Crane Has A Requirement For Circuit Card Assemblies In Accordance With The Government’s Associated Drawings And Parts Lists. contractors Must Be Properly Registered In The System For Award Management (sam). Offerors May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 866-606-8220 Or Via Https://sam.gov. this Solicitation Is Being Issued Pursuant To The Procedures At Far Part 13. Synopsis Exception Far 5.202(a)(13) Applies And Solicitation Number N0016425q0018 Is Hereby Issued As An Attachment Hereto. contract Opportunities On Https://sam.gov/ Has Officially Replaced Https://beta.sam.gov/ all Changes To The Requirement That Occur Prior To The Closing Date Will Be Posted To Contract Opportunities On Https://sam.gov/. It Is The Responsibility Of Interested Vendors To Monitor Https://sam.gov/ For Any Amendments, Which May Be Issued To This Solicitation. for Changes Made After The Closing Date, Only Those Offerors That Provide A Quote Will Be Provided Any Changes/amendments And Considered For Future Discussions And/or Award. offers Shall Be E-mailed To Shelby.j.craig.civ@us.navy.mil all Required Information Must Be Received On Or Before 4:00 Pm Eastern Time.

Description: Naval Surface Warfare Center (nswc) Crane Has A Requirement For Preventative Maintenance On Qfi Microscope, S/n:739 With Four Addition Option Years. the Proposed Contract Action Is For The Supplies Or Services For Which The Government Intends To Solicit And Negotiate With One Source, Quantum Focus Instruments Corporation, 2385 La Mirada Drive, Vista, California 92081, Under The Authority Of Far 13.106-1. This Is Being Sole Sourced Because This Equipment Requires Knowledge Of Proprietary Information Concerning The Design And Functioning Of The Instrument. Only Quantum Focus Instruments, The Manufacturer Of The Equipment, Has Access To This Information And Is The Only Source That Can Provide The Required Service. (insert Brief Basis For Sole Source). All Responsible Sources May Submit A Capability Statement, Which Shall Be Considered By The Agency. However, A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Solicitation Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. contractors Must Be Properly Registered In The System For Award Management (sam). Offerors May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 866-606-8220 Or Via The Internet At Https://sam.gov. this Solicitation Is Being Issued Pursuant To The Procedures At Far Part 13. Synopsis Exception Far 5.202(a)(13) Applies And Solicitation Number N00164-25-q-0525 Is Hereby Issued As An Attachment Hereto. contract Opportunities On Https://sam.gov/ Has Officially Replaced Fbo.gov all Changes To The Requirement That Occur Prior To The Closing Date Will Be Posted To Contract Opportunities On Https://sam.gov/. It Is The Responsibility Of Interested Vendors To Monitor https://sam.gov/ For Any Amendments, Which May Be Issued To This Solicitation. for Changes Made After The Closing Date, Only Those Offerors That Provide A Quote Will Be Provided Any Changes/amendments And Considered For Future Discussions And/or Award. offers Shall Be E-mailed To Morgan.m.helton.civ@us.navy.mil. All Required Information Must Be Received On Or Before 22 Jan 2025 - 2:00 Pm Eastern Time.

Description: N00164-25-q-0519 - Sole Source - Brand Name Delkin Hard Drives - Psc 5998 - Naics 334412 Issue Date 10 Jan 2025- Closing Date 17 Jan 2025 - 9:00 Am Eastern Time item Description- Naval Surface Warfare Center (nswc) Crane Has A Requirement For Brand Name: Delkin Devices S330 Series Solid State Drives (ssd), 64gb, 2.5" Sata Ssd Industrial Temperature. the Proposed Contract Action Is For The Supplies For Which The Government Intends To Solicit And Negotiate With One Source, Original Equipment Manufacturer (oem), Delkin Devices, Inc. 13350 Kirkham Way, Poway, Ca 92064 And/or Authorized Distributors Under The Authority Of Far 13.106-1. This Is Being Sole Sourced Because This Material Has Been Tested, Accredited, Approved, And Flight Certified For Use By The Oem. All Responsible Sources May Submit A Capability Statement, Which Shall Be Considered By The Agency. However, A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Solicitation Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. contractors Must Be Properly Registered In The System For Award Management (sam). Offerors May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 866-606-8220 Or Via The Internet At Https://sam.gov. this Solicitation Is Being Issued Pursuant To The Procedures At Far Part 13. Synopsis Exception Far 5.202(a)(13) Applies And Solicitation Number N00164-25-q-0519 Is Hereby Issued As An Attachment Hereto. Contract Opportunities On Https://beta.sam.gov/ Has Officially Replaced Fbo.gov all Changes To The Requirement That Occur Prior To The Closing Date Will Be Posted To Contract Opportunities On Https://beta.sam.gov/. It Is The Responsibility Of Interested Vendors To Monitor Https://beta.sam.gov/ For Any Amendments, Which May Be Issued To This Solicitation. For Changes Made After The Closing Date, Only Those Offerors That Provide A Quote Will Be Provided Any Changes/amendments And Considered For Future Discussions And/or Award. offers Shall Be E-mailed To Alicia.a.dobbyn.civ@us.navy.mil. all Required Information Must Be Received On Or Before 17 Jan 2025 - 9:00 Am Eastern Time.