Crane Tenders

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdg3a 13286 With Available Items Without Traction Motors [06 Nos] [refer Enclosure For The Material Composition].location-diesel Loco Shed Goc. Custodian-sse/diesel Shed/goc. Re-claimable Items - [1] Wheel Set Complete [axle, Wheel Disc, Bull Gear, Msu Tube, Axle Boxes With Bearings]-6 Sets.[2]hood Lock Assembly - 25 Nos. S.1539 No.738155 Dt.29.11.2024. Note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane,only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property. [8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery, Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean,free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12] The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed Goc)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm2 16867 With Available Items [refer Enclosure For The Approximate Weight And Material Composition].location-available At Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc. Custodian-sse/diesel/goc.re-claimable Items [1] Wheel Set Complete [msu Tubes, Gear Wheel And Axle Boxes With Bearings]-6 Sets. [2] Lubricating Oil Cooler [ptloc] - 1no. S.1539 No.124441 Dt.01.10.2024. Note-[1] Delivery To Be Made On As Is Where Is And Lot Basis. [2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane,only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property. [8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery, Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean,free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12] The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc)

Details: For Cost Management Advisory Services To Support The Preconstruction And Construction Phases Of The Development Works On The Site Known As Overdale And Which Is The Proposed Location For The New Acute Hospital. These Development Works Include Six (6) Initial Work Packages To Be Awarded Under Six (6) Separate Nec4 Contracts As Shown Below. This Opportunity Will See The Advisor Appointed Under A Single Nec4 Professional Services Contract (psc) To Assist The Employer And The Project Manager Both In The Tendering And Construction Periods. The Bidders Should Also Note There Are Concurrent Opportunities For A Project Manager And A Site Supervisor Role. The Anticipated Programme For The Works Is: Commencement 17th February 2025 And Completion 31st December 2025 Development Works Package 1 - Nec4(awarded Using The Ecc Option A) - A Contractor Shall Be Appointed To Undertake The Following Works: Design, Supply And Installation Of The Site Hoardings And Gates; The Removal Of Topsoil And Vegetation And Vegetation Along With The Remaining Hard Standings; Principal Contractor For Package 1 Development Works Package 2 - Nec4 (awarded Using The Ecc Option A)- A Contractor Shall Be Appointed To Undertake The Following Works: The Removal Of Utilities And Remaining Live Services, Including The Design And Installation Required For The Re-location Of The 11kv Transformer And Supply Development Works Package 3 - Nec4 (awarded Using The Ecc Option A) – A Contractor Shall Be Appointed To Undertake The Following Works: The Reduced Ground Level Dig (cut And Fill) To The Areas Covered By The Existing Planning Permission P/2021/1670 Development Works Package Contract 4 - Nec4 (awarded Using The Ecc Option A) – A Contractor Shall Be Appointed To Undertake The Following Works: Site Accommodation/welfare Facilities Incl. Car Parking And Utilities Development Works Package Contract 5 - Nec4 (awarded Using The Ecc Option A) – A Contractor Shall Be Appointed To Undertake The Following Works: Temporary Haul Road Development Works Package Contract 6 - Nec4 (awarded Using The Ecc Option A) – A Contractor Shall Be Appointed To Undertake The Following Works: Design And Installation Of The Crane Bases; Demolition Of A Wing Of The Camden Building, Rebuilding Of Gable Wall And Installation Of Kitchen

Details: For Nec4 Project Management Services To Support The Preconstruction And Construction Phases Of The Development Works On The Site Known As Overdale And Which Is The Proposed Location For The New Acute Hospital. These Development Works Include Six (6) Initial Work Packages To Be Awarded Under Six (6) Separate Nec4 Contracts As Shown Below. This Opportunity Will See The Advisor Appointed Under A Single Nec4 Professional Services Contract (psc) To Assist The Employer And The Supervisor With The Management And Control Of The Ecc Form Of Contract. ?the Bidders Should Also Note There Are Concurrent Opportunities For A Site Supervisor And A Cost Advisor Role. The Anticipated Programme For These Works Is: Commencement 17th February 2025 And Completion 31st December 2025 Development Works Package 1 - Nec4(awarded Using The Ecc Option A Form) - A Contractor Shall Be Appointed To Undertake The Following Works: Design, Supply And Installation Of The Site Hoardings And Gates The Removal Of Topsoil And Vegetation Along With The Remaining Hard Standings; Principal Contractor For Package 1 Development Works Package 2 - Nec4 (awarded Using The Ecc Option A)- A Contractor Shall Be Appointed To Undertake The Following Works: The Removal Of Utilities And Remaining Live Services, Including The Design And Installation Required For The Re-location Of The 11kv Transformer And Supply Development Works Package 3 - Nec4 (awarded Using The Ecc Option A) – A Contractor Shall Be Appointed To Undertake The Following Works: The Reduced Ground Level Dig (cut And Fill) To The Areas Covered By The Existing Planning Permission P/2021/1670 Development Works Package Contract 4 - Nec4 (awarded Using The Ecc Option A) – A Contractor Shall Be Appointed To Undertake The Following Works: Site Accommodation/welfare Facilities Incl. Car Parking And Utilities Development Works Package Contract 5 - Nec4 (awarded Using The Ecc Option A) – A Contractor Shall Be Appointed To Undertake The Following Works: Temporary Haul Road Development Works Package Contract 6 - Nec4 (awarded Using The Ecc Option A) – A Contractor Shall Be Appointed To Undertake The Following Works: Design And Installation Of The Crane Bases; Demolition Of A Wing Of The Camden Building, Rebuilding Of Gable Wall And Installation Of Kitchen

Details: For Site Supervisory Services To Support The Preconstruction And Construction Phases Of The Development Works On The Site Known As Overdale And Which Is The Proposed Location For The New Acute Hospital. These Development Works Include Six (6) Initial Work Packages To Be Awarded Under Six (6) Separate Nec4 Contracts As Shown Below. This Opportunity Will See The Advisor Appointed Under A Single Nec4 Psc Form Of Contract To Assist The Employer And The Project Manager With Assuring The Contracts Are Executed In Accordance With The Contract And Quality Standards. The Bidders Should Also Note There Are Concurrent Opportunities For A Project Manager And A Cost Advisor Role. The Anticipated Programme For These Works Is: Commencement 17th February 2025 And Completion 31st December 2025 Development Works Package 1 - Nec4(awarded Using The Ecc Option A Form) - A Contractor Shall Be Appointed To Undertake The Following Works: Design, Supply And Installation Of The Site Hoardings And Gates; The Removal Of Topsoil And Vegetation Along With The Remaining Hard Standings Principal Contractor For Package 1 Development Works Package 2 - Nec4 (awarded Using The Ecc Option A Form)- A Contractor Shall Be Appointed To Undertake The Following Works: The Removal Of Utilities And Remaining Live Services, Including The Design And Installation Required For The Re-location Of The 11kv Transformer And Supply Development Works Package 3 - Nec 4 (awarded Using The Ecc Option A Form) - A Contractor Shall Be Appointed To Undertake The Following Works: The Reduced Ground Level Dig (cut And Fill) To Areas Covered By The Existing Planning Permission P/2021/1670 Development Works Package Contract 4 - Nec4 (awarded Using The Ecc Option A) - A Contractor Shall Be Appointed To Undertake The Following Works: Site Accommodation/welfare Facilities Incl. Car Parking And Utilities Development Works Package Contract 5 - Nec4 (awarded Using The Ecc Option A) - A Contractor Shall Be Appointed To Undertake The Following Works: Temporary Haul Road Development Works Package Contract 6 - Nec4 (awarded Using The Ecc Option A) - A Contractor Shall Be Appointed To Undertake The Following Works: Crane Bases Demolition Of A Wing Of The Camden Building, Rebuilding Of Gable Wall And Installation Of Kitchen

Details: W912dw-25-r-0018: Lake Washington Ship Canal Small Lock Emergency Closure System this Is A Sources Sought Announcement And Is For Informational And Market Research Purposes Only. This Is Not A Request For Proposals, Quotations, Or Bids, Nor A Synopsis Of A Proposed Contract Action Under Far Subpart 5.2. The Proposed Action Will Be A Construction Project. The Type Of Solicitation To Be Issued Will Depend Upon Information Received In Response To This Sources Sought Announcement. No Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To Thissources Sought Announcement Or Any Follow-up Information. the North American Industry Classification (naics) Code For This Project Is 237990,other Heavy And Civil Engineering Construction/ Lock And Waterway Construction. The Product Service Code (psc) Is Y1pz,construction Of Other Non-building Facilities. The Associatedsmall Business Size Standard: $45 Million. responses To This Sources Sought Announcement Will Be Used By The Government To Make Appropriate Acquisition Decisions. No Solicitation Is Currently Available. This Is Not A Request To Be Placed On A Solicitation Mailing List And Is Not To Be Construed As A Commitment By The Government. The Results Of This Survey Will Be In Effect For A Period Of One Year From The Date Of This Notice. The Purpose Of This Sources Sought Announcement Is To Gain Knowledge Of Potentially Qualified Small Business, 8(a), Women Owned Small Business, Service-disabled Veteran Owned Small Business, And Hubzone Contractor Sources; As Well As Their Size Classifications Relative To The Naics Code 237990, Psc Code Y1pz, And Small Business Size Standard $45 Million. Depending Upon The Responses Associated With The Business Categories Listed Above, The Solicitation Will Either Be Set Aside In One Of Those Categories Or Be Issued As Unrestricted And Open To Both Small And Other Than Small Businesses. After Review Of The Responses To This Announcement And, If The Government Still Plans To Proceed With This Project, A Separate Solicitation Announcement Will Be Published On Sam.gov. Responses To This Announcement Are Not An Adequate Response To Any Future Solicitation Announcement. project Details: lake Washington Ship Canal Small Lock Emergency Closure System the Purpose Of This Project Is To Install A New Emergency Closure System At The Hiram M. Chittenden Locks, Lake Washington Ship Canal, Seattle, Wa. An Emergency Closure Structure Is Any Device Designed To Be Placed In Rapidly Flowing Water Under Differential Head To Prevent The Loss Of Pool If The Lock Miter Gates Are Damaged And Can No Longer Function To Control The Pool. An Emergency Closure System Consists Of A Closure Structure And All The Associated Equipment Necessary To Install The Closure Structure In Flowing Water. The Existing System Is Inadequate Because Deploying The Stoplogs Requires Divers To Disconnect The Stoplogs From The Crane. This Poses An Unacceptable Risk To The Divers During An Emergency Situation Where The Stoplogs Must Be Placed In Free Flow Conditions. the Project Can Be Broken Down Into Several Key Components, Crane, Full Height Bulkhead, And Bulkhead Storage Frame.the Contractor Shall Provide All Personnel, Equipment, Supplies, Facilities, Transportation, Tools, Materials, Supervision, And Other Items Necessary As Defined In The Sow And Specifications. The Contractor Shall Perform To The Standards In This Contract, Including Environmental Standards. pursuant To Far 36.204, The Estimated Magnitude Of Construction Is Expected To Be Between $1 Million And $5 Million. requirements: interested Firms Should Submit A Capabilities Package, To Include The Following: 1. Firm's Name, Address (mailing And Url), Point Of Contract, Phone Number, And Email Address. 2. Cage Code And Uei. 3. Firm's Interest In Bidding On The Solicitation, If Issued. 4. Business Classification: Small Business (sb), Small Disadvantaged Business (sdb), Women Owned Small Business (wosb), Veteran Owned Small Business (vosb), Service Disabled Veteran Owned Small Business (sdvosb), Historically Underutilized Business Zone Small Business (hubzone), Or 8(a) Program. 5. Firm's Joint Venture Information (if Applicable). all Interested Parties Who Believe They Can Meet The Requirements Are Invited To Submit, In Writing, Complete Information Describing Their Interest And Ability To Meet All Requirements Stated Above. Prior Government Contract Work Is Not Required For Submitting A Response To This Announcement. submit To: submission Shall Be Sent Via Email To Mckenna T. Rain, Contract Specialist, At Mckenna.t.rain@usace.army.mil. Responses Should Be Sent As Soon As Possible But No Later Than 12:00 Pm Eastern Time, January 3, 2025. Please Use The Following Subject Line For The Email: "w912dw-25-r-0018:lake Washington Ship Canal Small Lock Emergency Closure System". all Interested Firms Must Be Registered In The System For Award Management (www.sam.gov) And Maintain An Active Registration For The Duration Of The Contract To Be Eligible For Award Of Government Contracts. seattle District Small Business Programs Poc: enshane Nomoto enshane.nomoto@usace.army.mil https://www.nws.usace.army.mil/business-with-us/small-business/

Details: Description Rentals- Construction Of Municipal Landmark (pergola) 1. The Local Government Unit Of Lambayong, Through 20% Development Fund Intends To Apply The Sum Of Three Hundred Five Thousand Sixty-six Pesos Only (php 305,066.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Lam-bac-474-024. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Unit Of Lambayong Now Invites Bids The Construction Of Municipal Landmark (pergola)-rental. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The Irr Of Ra 9184. 4. Interested Bidders May Obtain Further Information From The Local Government Unit Of Lambayong And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00 P.m. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 10, 2024 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 500.00 5. The Local Government Unit Of Lambayong Will Hold A Pre-bid Conference On December 18, 2024 2:00 P.m. At The Bac Office, New Municipal Hall, Lambayong, Sultan Kudarat. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before 2:00 P.m.; January 6, 2025. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On 2:00 P.m.; January 6, 2025 At The Office Of The Bids And Awards Committee, New Municipal Hall, Lambayong, Sultan Kudarat. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 7. The Local Government Unit Of Lambayong Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 8. For Further Information, Please Refer To: Ramon J. Dudo Bac Chairperson 9802 Poblacion, Lambayong, Sultan Kudarat 09662296201/ 09171180904/ 09163712885 Baclambayong@gmail.com/ Lgu_lambayong@yahoo.com Qty Item Description Unit 5 Excavation & Removal Of Obstruction (backhoe) Days 5 Embankment (backhoe) Days 6 Truck Mounted Crane, All Models (21-25mt) Days 5 Plate Compactor Days

Details: Description Request For Quotation 1. The Philippine Ports Authority, Pmo Northern Luzon, Through Its Bids And Awards Committee (bac), Hereby Invites Contractors Duly Registered With The Philippine Contractors Accreditation Board (pcab) To Submit Quotation/bid Proposal For The Hereunder Project In Accordance With Sec. 53.9 (small Value Procurement) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184: A. Project Title : Relocation Of Rubber Dock Fender B. Location : Port Of Currimao, Ilocos Norte C. Approved Budget For The Contract (abc) : Php 143,058.23 D. Equipment Requirement: 1 – Cranes, Truck Mounted, Hydraulic Telescopic Boom, 100hp, Owned Or Leased 1 – Welding Machine, 400 Amp. Min., Owned E. Contract Duration: 15 Calendar Days 2. Prospective Bidders Shall Submit Their Quotations In Three (3) Copies Together With The Following Documents: A. Copy Of Valid Pcab License – “general Engineering D” B. Copy Of Valid And Current Mayor’s Permit. C. Copy Of Valid Phil-geps Registration/organizational Number D. Notarized Omnibus Sworn Statement 3. If Interested, Please Pay A Non-refundable Amount Of Five Hundred Pesos (php 500.00) Vat Inclusive, Before The Deadline Set For The Submission Of Bids. 4. Quotation/bid Proposal Accompanied With Detailed Cost Estimates Must Be Delivered To The Bids And Awards Committee (bac), C/o Bac Secretariat, Ppa, Pmo Northern Luzon, Brgy. Maglaoi Norte, Currimao, Ilocos Norte Or Thru E-mail Address Bac.ppanlz@gmail.com On Or Before 5:00pm, January 06, 2025. 5. Opening Of Price Quotations Will Be Conducted On January 07, 2025, 10:00 Am. (sgd) Fernando Z. Nipal Bac Chairperson

Details: The California National Guard Intends To Issue An Invitation For Bids (ifb) To Award A Single Firm-fixed-price (ffp) Contract For Services, Non-personal, To Construct A 24,564 Sqft National Guard Vehicle Maintenance Shop At Bakersfield, Kern County, California. This Facility Is Designed To Maintain Surface Equipment To The Highest Possible Operational State Of Readiness In Support Of Training, Natural Disaster Relief, And/or Combat Operations. The Contractor Shall Provide All Plant, Labor, New And Current Material, Transportation, Tools, Equipment, Appliances, Supplies, Services, Permits, Insurance, And Supervision Necessary For Construction. The Vehicle Maintenance Shop Shall Be Of Permanent Construction In Accordance With The Project’s Plans And Specifications. The Intended Site Is Property In Possession Of The California Army National Guard And Is Adjacent To An Existing Bakersfield Army National Guard Readiness Center. Integral Characteristics/items Of The Vehicle Maintenance Shop Include Backup/emergency Generator, Paved Organizational Vehicle Parking, Controlled Waste Facility, Flammable Materials Facility, And Electric/photovoltaic Power. This Project Will Include Comprehensive Interior Design. This Facility Will Be Designed To Meet Industry Standards As Well As All Local, State, And Federal Building Codes And As Per Public Law 90-480. Construction Will Include All Utility Services, Information Systems, Fire Detection And Alarm Systems, Cranes, Roads, Walks, Curbs, Gutters, Storm Drainage, Parking Areas For Approximately 20 Privately Owned Vehicles, And Site Improvements. Facilities Will Be Designed To A Minimum Life Of 50 Years In Accordance With Dod's Unified Facilities Code (ufc 1-200-02) Including Energy Efficiencies, Building Envelope And Integrated Building Systems Performance As Per Asa(ie&e) Sustainable Design And Development Policy Update Dec 2013. the Following Items May Be Included With The Solicitation As Additive Bid Items (abis) Or Options: provide Two-bay Fluid Distribution System. provide Three-bay Fluid Distribution System. provide 15-ton Crane Coverage. provide Vehicle Wash Rack. provide Dual-level Loading Dock. landscaping, Site & Rigid Pavement Enhancements. add Third Vehicle Maintenance Bay. there Are No Brand Name, Brand Name Or Equivalent, Or Sole Source Requirements. the Government Has Not Determined If This Project Will Be Set Aside For Small Businesses And Responses To This Posting Will Help The California National Guard To Determine If A Small Business Set Aside Is Warranted. In The Event Adequate Small Business Contractors Are Not Available For Adequate Competition For This Project, It May Be Advertised As Unrestricted. Firms Of All Sizes Are Therefore Encouraged To Provide A Response To This Notice. The North American Industry Classification System (naics) Code Is 236220, With A Small Business Size Standard Of $45,000,000. The Magnitude Of Construction Is Between $10,000,000 And $25,000,000. the Tentative Date For Issuing The Solicitation Is On-or-about Monday, 27 January 2025 With A Tentative Date For A Pre-bidconference And Site Visit On-or-about Wednesday, 12 February 2025. Interested Contractors Are Encouraged To Attend And Shall Follow Conference Registration And Base Access Requirements Shown In The Solicitation. the Bid Opening Date Is Tentatively Planned For On-or-about Wednesday, 2 April 2025. actual Dates, Times, And Locations For These Activities Will Be Identified In The Formal Solicitation. all Interested Concerns Should Provide A Written Response, Not To Exceed Five (5) Pages That Includes: a Positive Statement Of Their Intent To Submit A Proposal As A Prime Contractor. a Completed Source Sought Information Request Form (attached To This Posting; This Document Does Not Count Against The Page Limitation). a Listing Of Projects Completed During The Past Three Years, Both For Government And Private Industry. Please Include The Type Of Project, Dollar Value, Contract Number, Location, And Point Of Contact For The Owner/contracting Agency. Please Also Indicate If The Firm Was Prime Or Subcontractor. If A Subcontractor, Provide The Name And Point Of Contact For The Prime Contractor. a Brief Outline Of Resources, Subcontractors, And Key Personnel That Would Be Used To Accomplish The Contract. the Solicitation And Any Technical And/or Engineering Data For This Solicitation Will Be Distributed Using The Contract Opportunities Module Of The Sam Website. Interested Offerors Must Be Registered In The System For Award Management (sam) Website (www.sam.gov). Once Posted, The Solicitation's Technical/engineering Data May Locked/secured And Would Require Bidders To Request Explicit Access To The Solicitation From The Contracting Office.complete Instructions (to Include Training) Are Available Through The Sam Website. The California National Guard Is Unable To Provide Technical Assistance With The Site. Interested Firms/individuals Are Advised To Begin Gaining Access To Sam As Quickly As Possible. Bidders Will Be Able To Also Request Data Via Export-controlled Access Through The Defense Logistics Agency. your Attention Is Directed To Far Clause 52.219-14(e)(3) (deviation 2021-o0008), Limitations On Subcontracting, Which States “by Submission Of An Offer And Execution Of A Contract, The Offeror/contractor Agrees In Performance Of The Contract For General Construction, It Will Not Pay More Than 85 Percent Of The Amount Paid By The Government For Contract Performance, Excluding The Cost Of Materials, To Subcontractors That Are Not Similarly Situated Entities. Any Work That A Similarly Situated Entity Further Subcontracts Will Count Towards The Prime Contractor’s 85 Percent Subcontract Amount That Cannot Be Exceeded”. in Accordance With Far 36.211(b), The Following Information Is Provided: the National Guard Has No Agency-specific Policies Or Procedures Applicable To Definitization Of Equitable Adjustments For Change Orders Under Construction Contracts Other Than Those Described At Far 43.204, Dfars 243.204 And Afars 5143.204. data For The Prior 3 Fiscal Years Regarding The Time Required To Definitize Equitable Adjustments For Change Orders Under Construction Contracts For The National Guard Is Currently Not Available But Will Be Compiled And Provided In Future Announcements. disclaimer: The Official Plans And Specifications Will Only Be Available Through The Contract Opportunities Module. The Government Is Not Liable For Information Furnished By Any Other Source. Amendments, If/when Issued Will Only Be Posted To Contract Opportunities. It Is The Bidder’s Responsibility To Check The Website Periodically For Any Amendments To The Solicitation. The Government Is Not Responsible For Any Loss Of Internet Connectivity Or For An Offeror’s Inability To Access The Documents Posted On The Referenced Web Pages. The Government Will Not Issue Paper Or Emailed Copies.

Description: Sources Sought automated Mat Casting At Richardson Landing, Tn introduction: This Is A Sources Sought Announcement; A Market Survey For Information Only, To Be Used For Planning Purposes. This Is Not A Solicitation For Proposals And No Contract Will Be Awarded From This Announcement. the Government Is Seeking Qualified, Experienced Sources Capable Of Executing A Design Build Contract To Develop An Automated Casting Plant At Richardson Landing To Mass Produce Articulated Concrete Mattress (acm) Squares To Government Specifications Within Specific Tolerances. Squares Cast Will Be Stored On The Current Casting Field And Have Must Have A Compressive Design Strength Of 3,000 Psi At 28 Days. background: Annually, The United States Army Corps Of Engineers (usace) Mississippi Valley Division Casts Approximately 150,000 Squares Of Acm At 3 Government Furnished Locations (see Figure 1). The Acm Is Used As Revetment To Maintain Channel Stability For The Lower Mississippi River. Casting Acm Has Historically Been Provided Via Manual Labor And Cast Outdoors As Weather Permits. articulated Concrete Mattress – Current Process: an Articulated Concrete Mattress Square Consists Of 16 Individual Concrete Blocks (4 Feet X 18 Inches X 3 Inches Thick). They Are Currently Cast In Government Furnished Forms Upon A Proprietary Wire Mesh To Form An Articulated Concrete Mattress Square (4 Feet X 25 Feet X 3 Inches) That Is Used As An Assembly System For Interconnecting The 16 Concrete Blocks. A Mix Design Is Used To Acquire 3,000 Psi On A 28-day Cylinder Break. squares Of Mattress Are Cast In Stacks Of 13 That Are Neatly Aligned Vertically And By Rows (see Figure 2). One Layer Of Specified Paper Is Placed As A Separation Beneath The Bottom Square Of Each Stack And Between Each Successive Layer Of Mattress. The Current Process Requires The Wire Mesh To Be Placed On The Paper With The Cross Wires (bracket Wires) On Top Of The Longitudinal Wires. The Forms Are Then Placed Over The Wire Mesh, The Wire Mesh Drawn Up Into The Notches In The Sides And Cross Pieces Of The Forms, And Cross Rods Driven. The Central Location Of The Wire Mesh In The Form Is Very Important. Also, The Mat Surface Is Consequently Grooved To Provide Indentations Of Approximately 1/4 Inch In Depth And 1/8-inch Width. the Process Includes The Concrete Compacted To The Depth Of A Government Furnished Form By The Use Of Vibration. The Concrete Is Properly Consolidated With No Rock Pockets, Excessive Voids Or Honeycombs Visible On The Mat Surface. The Concrete Is Struck Flush With The Top Of The Forms And Given A Uniform Surface Finish And Uniform Thickness. Any Squares Not Meeting Government Furnished Specifications Are Rejected. requirements: the Contractor Shall Design And Develop A Semi-automated Casting Facility On The Grounds Of The Exiting Government Casting Yard That Can Produce A Minimum Of 50,000 Squares Per Calendar Year Per Shift With The Maximum Capability Of 150,000 Squares Annually With 3 Shifts. The Main Goals Of This Project Include: year-round, Indoor Casting Capability With No Weather-related Quality Issues During Production scalable Based On Number Of Operating Shifts reduced Touchpoints Via Automation high Quality, Increased Production, Improved Efficiency And Consistency improved Safety skilled Labor And Reduced Work Force require Fewer Forms (improved Consistency) heat/steam Curing To Reduce Cement Usage, Decrease Co2, And Higher Strength In A Shorter Timeframe modern Batching System Will Be More Efficient And Provide A Constant Mix Design eliminate The Use Of Separation Paper Between Squares the New Automated Facility Will Cast Acm Using Coarse And Fine Aggregate, Portland Cement, Fly Ash, Air-entraining Admixtures, And Calcium Chloride To Produce Articulated Concrete Squares, To Government Specifications. Squares Of Mattress Shall Be Provided In Stacks Of Up To 14 That Are Neatly Aligned Vertically And Will Be Placed In The Storage Yard In Rows By The Operational Contractor Using Government Furnished High Lift Cranes. Squares Cast Will Be Identical With Minimal Tolerance And Have Compressive Design Strength Of 3,000 Psi At 28 Days. Quality Is The Utmost Importance. Steam Curing And Other Technologies For Concrete Preparation Will Be Included While The Overall Design And Specifications Of The Mattress Will Remain The Same. the Design Of The Automated Facility Will Be Part Of The Contract And Will Ensure That The Facility Design Has Been Adequately Coordinated Between All Disciplines. Specifically, The Capacity Of The Infrastructure Within The Facility Shall Be Designed To Meet The Demands Of The Equipment Within The Facility. The Design Will Be A Two-phase Design Build Project And Will Require The Contractor To Procure Automation Equipment That Meets All “buy American” Requirements And The Design Will Meet All Required Policies For A Dod Facility. Several Of The Main Required Policies Are Listed Below: department Of Defense (2019). Unified Facilities Criteria, Facilities Criteria And Unified Facilities Guide Specifications, Mil-std-3007g. department Of Defense (2024). Dod Building Code, Ufc 1-200-01. department Of The Army (1999). Engineering And Design For Civil Works Projects, Er 1110-2-1150. department Of The Army (2024). Safety And Occupational Health (soh) Requirements, Em 385-1-1. dod Design Criteria: Https://www.wbdg.org/ffc/dod/unified-facilities-criteria-ufc all Designs Shall Be In Accordance With All Local, State, And Federal Laws And Regulations. interested Firms Should Submit A Capabilities Package To Include The Following: The Prime Firm And/or Its Subcontractor(s) (hereinafter Referred To Collectively As “firm”) Shall Have Relevant Experience In Mass Production Of Casting Concrete Products. The Firm Shall Demonstrate Experience Using Pre-cast Concrete. This Experience Must Have Been Performed Within The Last Five Years. firm’s Response To This Synopsis Shall Be Limited To 10 Pages And Shall Include The Following Information: firm’s Name, Address, Point Of Contact, Phone Number And E-mail Address. firm’s Prior Experience In Pre-cast Concrete. firm’s Capability To Perform A Contract Of This Magnitude (> $20m) And Complexity. firm’s Business Size (small Business, Large Business, .etc.) And Bonding Capacity. firms Overall Approach To The Requirements Listed Above. the Firm’s Capability For Performing A Design Build Contract For The Entirety Of This Requirement (facility And Equipment). any Assumptions Or Constraints In The Overall Execution Plan. a Rough Order Of Magnitude (rom) Estimate For The Completed Project. interested Firm’s Shall Respond To This Sources Sought Announcement No Later Than 12:00pm Cst, 5 January 2025. All Interested Firms Must Be Registered In Sam. No Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Synopsis Or Any Follow Up Information Requests. Respondents Will Not Be Notified Of The Results Of The Evaluation.