Crane Tenders

Details: N00164-25-q-0508 – Sole Source – Ram Assembly Shipset – Psc 5985 – Naics 334220 issue Date 16 Jan 2025 – Closing Date 21 Jan 2025 – 4:00 Pm Eastern Time naval Surface Warfare Center (nswc) Crane Has A Requirement For This Is A Firm Fixed Price, Non-commercial Supply, Sole Source, Items Peculiar To One Manufacturer, Iaw Statement Of Work Far 13 clin 0001, Pn: 970-00799-01, Qty = 3 sole Source Procurement- The Proposed Contract Action Is For The Supplies Or Services For Which The Government Intends To Solicit And Negotiate With One Source, Limited Sources Or Brand Name Only Meggitt (baltimore) Inc. Cage Code, 25223, Under The Authority Of Far 13.106-1. This Is Being Solicited On A Sole Source/brand Name Only Basis Because Of Items Peculiar To One Manufacture. All Responsible Sources May Submit A Capability Statement, Which Shall Be Considered By The Agency. However, A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Solicitation Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. contractors Must Be Properly Registered In The System For Award Management (sam). Offerors May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 866-606-8220 Or Via The Internet At Https://sam.gov. this Solicitation Is Being Issued Pursuant To The Procedures At Far Part 13 As A Written. Synopsis Exception Far 5.202(a)(13) Applies And Solicitation Number N00164-25-q-0508 Is Hereby Issued As An Attachment Hereto. all Changes To The Requirement That Occur Prior To The Closing Date Will Be Posted To Contract Opportunities On Https://sam.gov/. It Is The Responsibility Of Interested Vendors To Monitor Https://sam.gov/ For Any Amendments, Which May Be Issued To This Solicitation. for Changes Made After The Closing Date, Only Those Offerors That Provide A Quote Will Be Provided Any Changes/amendments And Considered For Future Discussions And/or Award. offers Shall Be E-mailed To Marty.arvin2.civ@us.navy.mil.all Required Information Must Be Received On Or Before 21 Jan 2024 4:00 Pm Eastern Time.

Details: N00164-25-q-0535 – Sole Source –mass Spectrometer Maintenance– Fsg J066 - Naics 811210 issue Date 22 Jan 2025 – Closing Date 24 Jan 2025– 4:00 Pm Eastern Time item Description- Naval Surface Warfare Center (nswc) Crane Has A Requirement For This Procurement Is For Service Provided For Ion-tof Sims5, Mass Spectrometer: System And Performance Check, Routine Maintenance Of All Ion Sources-detectors-stage-etc., Repair Or Replacement Of Defective Components, Mechanical Re-alignment, Check Of All Settings Files, Installation Of New Software Service Packs, Maintenance Repair Or Replacement Of Vacuum System Components. sole Source Procurement- The Proposed Contract Action Is For The Supplies Or Services For Which The Government Intends To Solicit And Negotiate With One Source, (ion-tof Inc Chestnut Ridge, Ny 10977), Under The Authority Of Far 13.106-1. This Is Being Sole Sourced Because (proprietary Information). All Responsible Sources May Submit A Capability Statement, Which Shall Be Considered By The Agency. However, A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Solicitation Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. contractors Must Be Properly Registered In The System For Award Management (sam). Offerors May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 866-606-8220 Or Via The Internet At Https://sam.gov. this Solicitation Is Being Issued Pursuant To The Procedures At Far Part 13. Synopsis Exception Far 5.202(a)(13) Applies And Solicitation Number N00164-25-q-0535 Is Hereby Issued As An Attachment Hereto. contract Opportunities On Https://sam.gov/ Has Officially Replaced Fbo.gov all Changes To The Requirement That Occur Prior To The Closing Date Will Be Posted To Contract Opportunities On Https://sam.gov/. It Is The Responsibility Of Interested Vendors To Monitor Https://sam.gov/ For Any Amendments, Which May Be Issued To This Solicitation. for Changes Made After The Closing Date, Only Those Offerors That Provide A Quote Will Be Provided Any Changes/amendments And Considered For Future Discussions And/or Award. offers Shall Be E-mailed To Dustin.l.spicer.civ@us.navy.mil. All Required Information Must Be Received On Or Before ___4:00 Pm____ Eastern Time.

Details: N00164-25-q-0539 – Sole Source –som 1300 Maintenance – Fsg J066 - Naics 811210 issue Date 28 Jan 2025 – Closing Date 30 Jan 2025 – 12:00 Pm Eastern Time item Description- Naval Surface Warfare Center (nswc) Crane Has A Requirement For A Service Agreement To Support A Scanning Optical Microscope Used For Assessments Of Cots And Gots Parts. It Is A Base Year Agreement With A One Year Option. sole Source Procurement- The Proposed Contract Action Is For The Supplies Or Services For Which The Government Intends To Solicit And Negotiate With One Source, (santana Solutions 405 Hunt Ln Buda, Texas 78610-2458), Under The Authority Of Far 13.106-1. This Is Being Sole Sourced Because (the Oem For The Microscope Is Semicaps And They Onlyrecognize Santana Solutions And Innovations Llc Who They Grant The Proprietary Information to So They Can Service These Tools.). All Responsible Sources May Submit A Capability Statement, Which Shall Be Considered By The Agency. However, A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Solicitation Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. contractors Must Be Properly Registered In The System For Award Management (sam). Offerors May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 866-606-8220 Or Via The Internet At Https://sam.gov. this Solicitation Is Being Issued Pursuant To The Procedures At Far Part 13. Synopsis Exception Far 5.202(a)(13) Applies And Solicitation Number N00164-25-q-0539 Is Hereby Issued As An Attachment Hereto. contract Opportunities On Https://sam.gov/ Has Officially Replaced Fbo.gov all Changes To The Requirement That Occur Prior To The Closing Date Will Be Posted To Contract Opportunities On Https://sam.gov/. It Is The Responsibility Of Interested Vendors To Monitor Https://sam.gov/ For Any Amendments, Which May Be Issued To This Solicitation. for Changes Made After The Closing Date, Only Those Offerors That Provide A Quote Will Be Provided Any Changes/amendments And Considered For Future Discussions And/or Award. offers Shall Be E-mailed To Christopher.m.jones405.civ@us.navy.mil . All Required Information Must Be Received On Or Before 30 Jan 2025 @ 12:00 Pm Eastern Time.

Details: Garrucha Automotive Crane Portico Operation And Maintenance.

Details: W911yn25qz0011 military Equipment Repair – Hydraulic Lines And Cylinders 1. Introduction: This Is A Sources Sought Notice Only – This Notice Is Issued Solely For Information And Planning Purposes, As A Means For The Government To Conduct Market Research, Identifying Interested Parties And Their Capability To Provide Vehicle Repair Services For The Florida Army National Guard. It Is The Intent Of The Government To Issue A Single Firm Fixed Priced Award To A Vendor Who Can Meet The Repair Requirements At Multiple Locations Around The State Of Florida. The Government Has The Capability To Bring The Vehicles Needing Repaired To A Vendor’s Repair Facility. responses To This Notice Will Be Considered And Will Help The Government Determine Potential Small Business Set-asides And Identify Potential Vendor Who Can Provide Repair Services In Multiple Locations Around The State Of Florida. 2. Repair Locations (not All Inclusive): pan Handle: tallahassee, Bonifay, Lake City central Florida: camp Blanding Joint Training Site/starke south Florida: west Palm Beach, Miramar, Tampa, Haines City, Plant City 3. Disclaimer: This Notice Does Not Constitute A Request For Quote (rfq) Or A Promise To Issue A Rfq In The Future. Solicitation Information Is Not Available At This Time. Requests For A Solicitation Will Not Receive A Response. This Notice Does Not Constitute A Commitment By The United States Government To Contract For Any Service Whatsoever. All Information Submitted In Response To This Announcement Is Voluntary; The United States Government Will Not Pay For Information Requested Nor Will It Compensate Any Respondent For Any Cost Incurred In Developing Information Provided To The United States Government. Not Responding To This Notice Does Not Preclude Participation In Any Future Rfq, If Any Is Issued. It Is The Responsibility Of The Potential Offerors To Monitor This Site For Additional Information Pertaining To This Requirement. 4. Contractor Capability: All Interested Firms Shall Submit A Capabilities Package That Explicitly Demonstrates Their Capability To Provide The Required Vehicle Repair Services. The Capabilities Package Should Be Brief And Concise, Yet Clearly Demonstrate An Ability To Meet The Stated Requirements And Its Ability To Provide Repair Services In Multiple Locations Around The State Of Florida. 5. Responses To Notice: Responses To This Notice Shall Be Limited To Three Pages And Submitted On Sam.gov Or By Email To Contracting Officer, Jeff Moore (jeffrey.d.moore14.mil@army.mil). Email Shall Contain A Subject Line That Reads"w911yn25qz0011, Military Equipment Repair – Hydraulic Lines And Cylinders ". Ensure Only .pdf, .doc, .docx, .xsls Or .xls Documents Are Attached To Your Email. responses Are Due No Later Than Thursday, 27 Jan 2025 By 2pm Eastern Standard Time. any Questions May Be Directed To The Point Of Contact Listed Above. the Applicable Naics Code For This Requirement Is C - Commercial And Industrial Machinery And Equipment (except Automotive And Electronic) Repair And Maintenance, With A Small Business Size Standard Of $12.5 Million. The Product Service Code Is J035. Businesses Of All Sizes Are Encouraged To Respond; However, Each Respondent Must Clearly Identify Their Business Size In Their Response Under The Applicable Naics Of 811310. respondents Shall Not Be Obligated To Provide The Services Described Herein. responses From Interested Vendors Should Address The Confirmation That Your Company Can Provide The Followingrepair Services: military Equipment To Be Worked On: medium Tactical Vehicle (mtv) Cargo With Crane (m1084) mtv Wrecker (m1089) load Handling System (lhs) (m1120) palletized Load System (pls) (m1074) heavy Expanded Mobility Tactical Truck (hemtt) Wrecker (m984) hemtt Cargo With Crane (m985) approximately 34 Vehicles Require Repair - 20 Need Cylinder Repairs And 14 Need Hydraulics Lines Replaced. the Majority Of The Work Will Be To Complete One Of The Following: remove, Rebuild And Replace Hydraulic Cylinders On Military Vehicles. rebuild Hydraulic Cylinders For Military Vehicles. remove Hydraulics Lines/hoses From Military Vehicles And Create New Hoses And Place On Vehicles. remove Hydraulics Lines/hoses From Military Vehicles And Replace With Government Provided Hoses. provide Company Socio-economic Status (i.e. Small, Small Disadvantages Women-owned, Service-disabled Veteran Owned, Etc.) Under Identified Naics And Company Profile To Include, Cage Code, Duns Number. Also, Please Provide The Gsa Contract Number And Sin The Products Are Available Under, If Applicable. Along With The Above, Please Review The Below Government Request For Information request For Information: if Possible, Please Provide Answers To The Following Questions. 1. Are There Specific Requirements In The Documentation That Has The Effect Of Limiting Competition Among Potential Vendors? 2. Are There An Alternate Naics Other Than 811310 That You Believe Is More Appropriate For This Requirement? If So, What Is The Naics And Why? 3. Is There A Better Industry Standard In Order To Procure The Requested Services? 4. Are There Any Ways You Would Want The Government To Considering Asking For Pricing Information, E.g. A Separate Line Item For Conducting A Diagnostic To Determine What Repair Services Are Required On Each Piece Of Equipment, Fixed Repair Labor Rates, Estimated Hours For Repair? It Is The Intent Of The Government To Use Best Commercial Practices Regarding Pricing. 5. Is There A Required Lead Time That The Government May Need To Take Into Consideration For This Procurement? 6. Does Your Company Have The Resources And Capability To Provide Repairs On-site?

Details: Intent To Sole Source - Saylorville Lake Dam Control Tower Sluice Gate Fabrication And Replacement the U.s. Army Corps Of Engineers, Rock Island District, Intends To Enter Into Contract With Bci Construction Usa, Llc (bci) For The Acquisition And Installation Of Four Sluice Gate Hoists Outlined Below, On A Sole Source Basis, In Accordance With The Statutory Authority Of 10 United States Code 3204(a)(1) As Implemented In Federal Acquisition Regulation 6.302-1(a)(2)(ii)(a And B), “substantial Duplication Of Cost To The Government That Is Not Expected To Be Recovered Through Competition And Unacceptable Delays In Fulfilling The Agency’s Requirements." project Description: saylorville Lake Has A Requirement For Replacement Of Four Mechanical Lifting Hoists. Hoists Equipment Is Required To Have The Lifting Capacity Of 30 Tons And Sequence Of Work Is Limited To One Sluice Gate Hoist Removal And Installation At A Time. Work To Be Completed Includes, But Is Not Limited To: Mobilization Of A Crane That Can Lift Sluice Gate Hoist Equipment At Least 110 Feet; Removal Of The Control Tower Roof, Remove Existing Wire Rope And Wire Rope Rigging From The Sluice Gate And Wire Rope Drum; Removal And Disposal Of Existing Sluice Gate Hoist Equipment; Installation Of The New Sluice Gate Hoist Equipment To Include Rigging Wire Rope To The Sluice Gate And Wire Rope Drum; Operational Testing And Limit Switch Control Programming; Installation Of The Control Tower Roof; Site Restoration. work On This Project Must Be Completed By 30 November 2025. the Naics Code For This Procurement Is 237310 - Highway, Street, And Bridge Construction With A Size Standard Of $45m. this Notice Is Not A Request For Competitive Quotes And No Solicitation Will Be Issued. However, Any Business Firm That Believes It Can Meet The Requirement May Give Written Notification To The Contracting Officer In The Form Of A Capability Statement. supporting Evidence In Sufficient Detail That Demonstrates The Ability To Comply With The Requirement Listed And Must Be Furnished To The Point Of Contact Listed Below By Tuesday, January 21, 2025, At 10:00 A.m. Central Time. a Determination By The Government Not To Compete This Proposed Contract Based On Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. the U.s. Army Corps Of Engineers, Rock Island District, Will Not Reimburse For Any Costs Connected With Supplying Sufficient Detail To Demonstrate The Ability To Comply With The Requirements Listed. In Order To Receive A Government Award, A Firm Must Be Registered In The System For Award Management (sam) (https://sam.gov/). Firms Must Register On A One-time Basis, And Annually Confirm Accuracy And Completeness Of Registration Information. questions And Capability Statements Should Be Sent Directly To John Wysocki Contract Specialist, At John.j.wysocki@usace.army.mil.

Details: N00164-25-q-0529 – Sole Source – Electric Load Hoist – Fsg 1440 - Naics 333923 Issue Date 21 Jan 2025 – Closing Date 28 Jan 2025 – 2:00 Pm Eastern Time naval Surface Warfare Center (nswc) Crane Has A Requirement For Davit Electric Load Hoist In Accordance With (iaw) Task Description, Drawings And Cdrls. the Proposed Contract Action Is For The Supplies Or Services For Which The Government Intends To Solicit And Negotiate With One Source, Brand Name Electro Lift Inc, 204 Sargeant Way, Clifton Nj 07013, Under The Authority Of Far 13.106-1. This Is Being Sole Sourced Because Electro Lift Was Chosen To Be The Supplier Of The Hoist Because This Particular Item Is Currently On The Fielded Davits And Has Proven Successful Over Their Life. There Are Currently Spare Parts And Supplies For This Particular Manufacturer And Item In Supply. The Davit Spalt Modifications Have Been Designed With This Particular Manufacturer And Item Number (insert Brief Basis For Sole Source). All Responsible Sources May Submit A Capability Statement, Which Shall Be Considered By The Agency. However, A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Solicitation Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. contractors Must Be Properly Registered In The System For Award Management (sam). Offerors May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 866606-8220 Or Via The Internet At Https://sam.gov. contractors Must Be Properly Registered In The System For Award Management (sam) And The Joint Certification Program (jcp) In Order To Receive The Controlled Attachments. Offerors May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 866-606- 8220 Or Via Https://sam.gov. Information About The Jcp Is Located At Https://public.logisticsinformationservice.dla.mil/publichome/jcp/default.aspx. The Controlled Attachments Will Be Posted At The Same Time The Solicitation Is Posted. this Solicitation Is Being Issued Pursuant To The Procedures At Far Part 13. Synopsis Exception Far 5.202(a)(13) Applies And Solicitation Number N00164-25-q-0529 Is Hereby Issued As An Attachment Hereto. contract Opportunities On Https://sam.gov/ Has Officially Replaced Fbo.gov all Changes To The Requirement That Occur Prior To The Closing Date Will Be Posted To Contract Opportunities On Https://sam.gov/. It Is The Responsibility Of Interested Vendors To Monitor Https://sam.gov/ For Any Amendments, Which May Be Issued To This Solicitation. for Changes Made After The Closing Date, Only Those Offerors That Provide A Quote Will Be Provided Any Changes/amendments And Considered For Future Discussions And/or Award. offers Shall Be E-mailed To Morgan.m.helton.civ@us.navy.mil. All Required Information Must Be Received On Or Before 28 Jan 2025 – 2:00 Pm Eastern Time

Details: N00164-25-q-0528 – Sole Source – Mast Mounted Hoist – Fsg 1440 - Naics 333923 Issue Date 23 Jan 2025 – Closing Date 30 Jan 2025 – 2:00 Pm Eastern Time naval Surface Warfare Center (nswc) Crane Has A Requirement For Mast Mounted Hoist P/n: M452b-s4 In Accordance With (iaw) Task Description, Drawings And Cdrls. the Proposed Contract Action Is For The Supplies Or Services For Which The Government Intends To Solicit And Negotiate With One Source, Thern Inc, 5712 Industrial Park Road, Winona, Mn 55987 Under The Authority Of Far 13.106-1. This Is Being Sole Sourced Thern Inc. Was Chosen To Be The Supplier Of The Hoist, Mast Mounted Because This Particular Item Is Currently On The Fielded Davits And Has Proven Successful Over Their Life. There Are Currently Spare Parts And Supplies For This Particular Manufacturer And Item In Supply, If A Different Manufacturer Or Item Is Used Spare Parts Will Need To Be Discarded And Replaced With New Items. All Responsible Sources May Submit A Capability Statement, Which Shall Be Considered By The Agency. However, A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Solicitation Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. contractors Must Be Properly Registered In The System For Award Management (sam). Offerors May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 866-606-8220 Or Via The Internet At Https://sam.gov. contractors Must Be Properly Registered In The System For Award Management (sam) And The Joint Certification Program (jcp) In Order To Receive The Controlled Attachments. Offerors May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 866-606-8220 Or Via Https://sam.gov. Information About The Jcp Is Located At Https://public.logisticsinformationservice.dla.mil/publichome/jcp/default.aspx. The Controlled Attachments Will Be Posted At The Same Time The Solicitation Is Posted. this Solicitation Is Being Issued Pursuant To The Procedures At Far Part 13. Synopsis Exception Far 5.202(a)(13) Applies And Solicitation Number N00164-25-q-0528 Is Hereby Issued As An Attachment Hereto. contract Opportunities On Https://sam.gov/ Has Officially Replaced Fbo.gov all Changes To The Requirement That Occur Prior To The Closing Date Will Be Posted To Contract Opportunities On Https://sam.gov/. It Is The Responsibility Of Interested Vendors To Monitor Https://sam.gov/ For Any Amendments, Which May Be Issued To This Solicitation. for Changes Made After The Closing Date, Only Those Offerors That Provide A Quote Will Be Provided Any Changes/amendments And Considered For Future Discussions And/or Award. offers Shall Be E-mailed To Morgan.m.helton.civ@us.navy.mil. All Required Information Must Be Received On Or Before 30 Jan 2025 – 2:00 Pm Eastern Time

Description: Sources Sought Synopsis for elk City Gate Repair elk River, Elk City, montgomery County, Kansas this Is A Sources Sought Announcement; A Market Survey For Information Only, To Be Used For Preliminary Planning Purposes. This Is Not A Solicitation For Proposals And No Contract Will Be Awarded from This Synopsis. No Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Synopsis Or Any Follow Up Information Requests. Respondents Will Be Notified Of The Results Of The Evaluation Upon Request. the U.s. Army Corps Of Engineers – Tulsa Has Been Tasked To Solicit For And Award A Contract For The Elk City Gate Repair, At The Elk River, Elk City, Kansas. The Proposed Design-bid-build Project Will Be Procured As A Competitive, Firm-fixed Price Contract In Accordance With Far 15, Negotiated Procurement, Using The Lowest Price Technically Acceptable Approach, Tradeoffs Will Not Be Permitted. The Type Of Set-aside Decision To Be Issued Will Depend Upon The Capabilities Of The Responses To This Synopsis. the Purpose Of This Synopsis Is To Gain Knowledge Of Interest, Capabilities And Qualifications Of Various Members Of Industry, To Include The Small Business Community: Small Business, Section 8(a), Historically Underutilized Business Zones (hub-zone), Service-disabled Veteran-owned Small Business (sdvosb), And Women-owned Small Business (wosb). The Government Must Ensure There Is Adequate Competition Among The Potential Pool Of Responsible Contractors. Small Businesses, Section 8(a), Hubzone, Sdvosb, And Wosb Businesses Are Highly Encouraged To Participate. the Work Includes, But Is Not Limited To, The Following: base: Service Gate 2, Fabricate And Deliver Four Roller Chain Backing Plate Assemblies For Gate 2. This Will Include The Backing Plate, Two Side Guide Bars, And The Screws. Fabricate And Deliver Two Roller Chain Housing Assemblies For Gate 2. This Will Include The Upper, Lower, And Vertical Housing Sections And The Bolts, Nuts, And Washers Used For Installation. Fabrication Will Require Either Field Verification Of All Bolt And Screw Locations Or The Ability To Tap Them In The Field During Installation. removal And Disposal Of The Existing Roller Chain Housing Assemblies. This Will Require The Use Of Scaffolding And Fall Protection For The Material Removed And The Personnel Working. Removal And Disposal Of The Roller Chain Backing Assemblies. This Will Require Safely Removing And Storing The Roller Chain And Grinding The Existing Tack Welds And Screws Currently In Place. installation And Operability Testing Of The Roller Chain Backing Plate Assemblies. This Will Include Connecting The Assemblies Via The Provided Screws Only. Installation And Operability Testing Of The roller Chain Housing Assemblies. This Will Include Connecting The Assemblies Via The Bolts, Nut, And Washers Provided. Testing Will Include Exercising The Gates To Their Full Capabilities A Minimum Of Three Times. option 1: Service Gate 1 Includes All Work Listed For The Base Bid Applied To Gate 1. option 2: Emergency Gate Includes All Work Listed For The Base Bid Applied To The Emergency Gate. the Government Will Operate The On-site Gantry Crane. in Accordance With Far 36 And Dfars 236, The Estimated Construction Price Range For This Project Is Between $1,000,000 And $5,000,000. estimated Construction Duration Of The Project Is 300 Calendar Days. the North American Industry Classification System Code For This Procurement 237990 ( other Heavy And Civil Engineering Construction) Which Has A Small Business Size Standard Of $45m. the Product Service Code Is: Z2ka (maintenance Of Dams) small Businesses Are Reminded Of Far 52.219-14, Limitations On Subcontracting. Firm Will Not Pay More Than 85% Of The Amount Paid By The Government For Contract Performance, Excluding The Cost Of Materials, To Subcontractors That Are Not Similarly Situated Entities. Any Work That A Similarly Situated Entity Further Subcontracts Will Count Toward The 85% Subcontract Amount That Cannot Be Exceeded. Large Businesses Must Comply With The Far 52.219-9 By Submitting A Small Business Subcontracting Plan Should This Action Be Solicited As Full And Open Competition And An Award Is Made To A Large Business Firm. prior Government Contract Work Is Not Required For Submitting A Response To This Sources Sought Synopsis. All Construction Performance Must Be In Compliance With The Usace Safety And Health Requirements Manual (em 385- 1-1), And Must Also Comply With All Federal, State And Local Laws, Ordinances, Codes And/or Regulations. anticipated Solicitation Issuance Date Is On Or About 5 Mar 2024, And The Estimated Proposal Due Date Will Be On Or About 5 Apr 2024, The Official Synopsis Citing The Solicitation Number Will Be Issued On Http://sam.gov, Inviting Firms To Register Electronically To Receive A Copy Of The Solicitation When It Is Issued. firm’s Response To This Synopsis Shall Be Limited To 5 Pages And Shall Include The Following Information: firm’s Name, Address, Point Of Contact, Phone Number, And E-mail Address. firm’s Interest In Bidding On The Solicitation When It Is Issued. firm’s Capability To Perform The Magnitude And Complexity Outlined In The Scope Of Work Above (include Firm’s Capability To Execute Construction- Comparable Work Performed Within The Past 5 Years): brief Description Of The Project, Customer Name, Timeliness Of Performance, And Dollar Value Of The Project) – Provide At Least 3 Examples. firm’s Business Size – Lb, Sb, 8(a), Hubzone, Sdvosb, Or Wosb. firm’s Joint Ventures (existing), Including Mentor Protégés And Teaming Arrangement Information Is Acceptable. firm’s Bonding Capability (construction Bonding Level Per Contract And Aggregate Construction Bonding Level, Both Expressed In Dollars) Via Letter From Bonding Company. interested Firm’s Shall Respond To This Sources Sought Synopsis No Later Than 2:00pm Cst, 10 Jan 2024 All Interested Firms Must Be Registered In Sam To Be Eligible For Award Of Government Contracts. Mail, Fax Or Email Your Response To Tyler Godwin, U.s. Army Corps Of Engineers, Tulsa District (cect-swt), 2488 East 81st Street, Tulsa, Ok 74137-4290. Email: Tyler.l.godwin@usace.army.mil. Please Also Provide A Copy Of The Response To Mr. Gene Snyman, Small Business Deputy, At Gene.snyman@usace.army.mil.

Description: BOQ ITEMS: TORQ SET BITS 3mm, TORQ SET BITS 4mm, TORQ SET BITS 5mm, TORQ SET BITS 6mm, TORQ SET BITS 8mm, SLOTED TORQUE BIT , PHILLIPS TORQUE BIT PH 0, PHILLIPS TORQUE BIT PH 1, PHILLIPS TORQUE BIT PH 3, SOCKET HEAD TORQUE BIT 2MM, SOCKET HEAD TORQUE BIT 2.5MM, SOCKET HEAD TORQUE BIT 3MM, SOCKET HEAD TORQUE BIT 4MM, SOCKET HEAD TORQUE BIT 5MM, SOCKET HEAD TORQUE BIT 6MM, SOCKET HEAD TORQUE BIT 7MM, SCREW DRIVERS FOR SLOTTED SCREWS DRALL DRIVER 4.5MM, SCREW DRIVERS FOR SLOTTED SCREWS DRALL DRIVER 5.5MM, SCREW DRIVERS FOR SLOTTED SCREWS DRALL DRIVER 6.5MM, SCREW DRIVERS FOR SLOTTED SCREWS DRALL DRIVER 8MM, STAINLESS STEEL SCREWDRIVERS FOR PHILLIPS SCREWS SIZE 30, STAINLESS STEEL SCREWDRIVERS FOR PHILLIPS SCREWS SIZE 36, HEXAGON KEY WRENCHES SIZE 1.5MM TO 10MM, HEXAGON KEY WRENCHES SIZE 12MM, HEXAGON KEY WRENCHES SIZE 14MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 4MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 5MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 6MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 7MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 8MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 10MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 12MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 14MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 17MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 19MM, FEELER GAUGE , RADIUS GAUGE Range 1 to 7 mm, SCREW PITCH GAUGE 0.25 to 6 mm , TORQUE SCREWDRIVER 2 to 10MM, METRIC RATCHET COMBINATION WRENCHES SIZE 10MM, METRIC RATCHET COMBINATION WRENCHES SIZE 13MM, VERNIER CALIPER Range 0 to 150, VERNIER CALIPER Range 0 to 300, MEAURING TAPE Range 5M, MEAURING TAPE Range 10M, MEAURING TAPE Range 30M, STEEL RULE Range 150mm , STEEL RULE Range 300mm, STEEL RULE Range 600mm, STEEL RULE Range 1M, WEIGHING MACHINE Range 0 to 100kg, WEIGHING MACHINE Range 0 to 500kg, WEIGHING MACHINE Range 0 to 1500kg, Flat half cut files with handle, FLAT BASTARD FILES WITH HANDLE, HALF-ROUND SECOND-CUT FILES WITH HANDLE, HALF-ROUND BASTARD FILES WITH HANDLE, SECOND-CUT ROUND FILES WITH HANDLE, ROUND BASTARD FILES WITH HANDLE, SECOND CUT SQUARE FILES WITH HANDLE, SQUARE BASTARD FILES WITH HANDLE, SECOND CUT TRIANGLE FILES WITH HANDLE, TRIANGLE BASTARD FILES WITH HANDLE, HALF ROUND SECOND CUT RASPS MEDIUM CUT, HALF ROUND BASTARD RASPS LARGE CUT, ROUND SECOND CUT RASPS MEDIUM CUT, FLAT RASPS MEDIUM CUT, NEEDLE FILES, EMERY PAPER GRADE 120, EMERY PAPER GRADE 220, EMERY PAPER GRADE320, WIRE TWISTING WRENCH, TWISTING WIRE DIA 0.8 MM 1 SPOOL 8KGS, LED TORCH, PLIER, NOSE PLIERS, TUBULAR HACKSAW, SMALL ANGLE GRINDER SIZE 4, DRILL MACHINE SIZE 13MM, TORQUE WRENCH RANGE 120 to 600 nm , TORQUE WRENCH RANGE 10 to 50 nm , TORQUE WRENCH RANGE 20 to 100 nm , TORQUE WRENCH RANGE 70 to 340 nm , INSULATED GLOVES, SAFETY OVER GLOVES, OUTSIDE PULLER, INSIDE PULLER, LOCKING TWIN SLIP JOINT MULTIGRIP PLIERS 22MM, LOCKING TWIN SLIP JOINT MULTIGRIP PLIERS 28 MM, DOUBLE END OPEN SPANNER SIZE 6 TO 32, LONG METRIC KEY L TYPE 1.5 to 18 mm, METRIC OFFSET RING WRENCHES SIZE 6 TO 22, METRIC OPEN END BITS drive 9x12 mm 16 to 19 mm, METRIC OPEN END BITS drive 14x18 mm 13 to 32 mm, hex bolt nut and washer M6 into 50, hexboltnut and washerM6 into100, hexboltnut and washerM8 into 50, hex bolt nut and washer M8 into 100, hex bolt nut and washer M10 into 5, hex bolt nut and washer M10 into 100, hex bolt nut and washer M12 into 50, hex bolt nut and washer M12 into 100, Socket Head Cap Screw Nut and Washer Size M6 into 50, Socket Head Cap Screw Nut and Washer Size M6 into 100, Socket Head Cap Screw Nut and Washer Size M8 into 50, Socket Head Cap Screw Nut and Washer Size M8 into 100, Socket Head Cap Screw Nut and Washer Size M10 into 50, Socket Head Cap Screw Nut and Washer Size M10 into 100, Socket Head Cap Screw Nut and Washer Size M12 into 50, Socket Head Cap Screw Nut and Washer Size M12 into 100, metric crowfoot open end bits, crane scale , Tweezers