Crane Tenders

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdg3a 14640 With Available Items (refer Enclosure For The Approximate Weight).location-diesel Loco Shed/ernakulam, Custodian-sse/dsl/ers.re-claimable Items [1]wheel Set Complete (axle,wheel Disc,bull Gear,rsp Tubes, Axle Boxes With Bearings)-6 Sets.[2]locomotive Batteries-8 Nos. S.1539 No.534317 Dt.17.10.2024.note-[1]delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane,only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean,free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12]further Stripping Of Sub Assemblies Such As Motors, Alternators, Turbo, Lube Oil Cooler, Compressor, Etc. Should Be Strictly Prohibited In Railway Premises To Prevent Unnecessary Delays And Pollution.[13]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [14] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [15] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed/ernakulam)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdg3a 14672 With Available Items [refer Enclosure For The Approximate Weight And Material Composition].location-available At Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc. Custodian-sse/diesel/goc.re-claimable Items [1] Wheel Set Complete [msu Tubes, Gear Wheel And Axle Boxes With Bearings]- 06 Sets. [2] Exciter Generator -01 No [3] Aux. Generator - 01 No [4] Bkbl -01 No [5]resister Grid -12 Nos [6] Inter Cooler Air Compressor - 02 Nos [7] Air Compressor -01 No. S.1539 No.124447 Dt.21.10.2024. Note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane,only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property. [8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery, Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean,free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12] The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdg3a 14741 With Available Items [refer Enclosure For The Approximate Weight And Material Composition ].location-available At Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc. Custodian-sse/diesel/goc.re-claimable Items [1] Bogie Frame -2 Nos [2] Exciter Generator-1 No [3] Aux.generator-1 No [4] Bkbl-1 No [5] Grid -6 Nos [6] Wheel Set Complete [axle,wheel Disc,bull Gear, Msu Tube, Axle Boxes With Bearings)-6 Sets. S.1539 No.124446 Dt.21.10.2024. Note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane,only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property. [8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery, Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean,free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12] The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Available At Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc)

Details: Amendment 0001: the Purpose Of This Amendment Is Make An Industry Day Announcement. Please See Section Labeled Industry Day Below. original Posting: n0016425rwm46 – An/slq-32(v)6 Antenna Shelter Refurbishments – Psc J020 – Naics 332710 anticipated Issue Date: 18 Nov 2024 – Closing Date: 17 Dec 2024 4:00 Pm Edt naval Surface Warfare Center (nswc) Crane Has A Requirement For The Procurement Of Mechanical Refurbishment And Replacement Of An/slq-32(v)6 Shelter Structures. This Requirement Includes Disassembly, Abrasive Blasting, Coating, Reassembly, And Production Of The Aluminum An/slq-32(v)6 Shelter Structures. This Requirement Will Be Satisfied Via A Tiered Approach With Varying Levels And Pricing Of Refurbishments Being Completed. The Government Anticipates Awarding A Single Five-year Indefinite-delivery Indefinite-quantity (idiq) Contract With Firm-fixed-price Line Items. Anticipated Idiq Quantities Are A Minimum Of One (1) Shelter Set And A Maximum Of 125 Shelter Sets Over The Life Of The Contract. Unit Of Issue Is Each. requirements Include The Following: machining Capabilities Of Components Measuring Up To 103” X 52” X 6” mechanical Disassembly Of Aluminum 6061 Components abrasive Blasting Aluminum 6061 Components Per Mil-std-1504 Or Sspc Sp 10 To Achieve Surface Roughness Of 0.002 In To 0.004 In Per Astm D4417 hard Anodizing Aluminum 6061 Components Per Mil-a-8625, Type Iii, Class 1 priming Aluminum 6061 Components Per Mil-dtl-24441, Type Iv, One Coat, Dry Film Thickness A Minimum Of 0.002 In painting Aluminum 6061 Components Per Mil-prf-24635 Type V, Class 2, Grade B, Color Gray Semigloss (haze) Per Fed-std-595, Two Coats Dry Film Thickness 0.003 In. Min. replacing Stainless Steel Threaded Inserts Per Nasm47196, A-a-59158 And Nasm33537 stenciling Or Marking Painted And Anodized Aluminum 6061 Components Per Mil-std 130 Using Epoxy Ink Per A-a-56032 Type I; Or Labeling Painted And Anodized Aluminum 6061 Components Per Mil-prf-61002a, Grade A, Style 1, Composition C mechanical Assembly Of Aluminum 6061 Components transportation Of Loaded Wooden Crates Measuring 123" X 81" X 63", Weighing 2500 Lbs. the Government’s Technical Data Package (tdp) For This Effort Is Provided As A Controlled Attachment. Solid Cad Models Of All Components Are Also Available. the Navy Intends To Solicit This Contract As A Total Small Business Set-aside Iaw Far Subpart 19.502-2. Delivery Is Required Fob Destination Nswc Crane Within 6 To 12 Months Depending On The Repair Tier Required. The Solicitation Will Be Made Available On Sam.gov Via The Piee Solicitation Module. All Changes That Occur To Competitive Actions Prior To The Closing Date Will Be Posted To Contract Opportunities On Https:/sam.gov/ Via The Piee Solicitation Module. For Within Scope Changes Made After The Closing Date, Only Those Offerors That Provide A Proposal Will Be Provided Any Changes/amendments And Considered For Future Discussions And/or Award. the Solicitation, All Amendments And Associated Controlled Documents Will Be Posted Onprocurement Integrated Enterprise Environment (piee Formerly Known As Wawf) Solicitationmodule At Https://piee.eb.mil. The Solicitation Notice Will Flow To Sam.gov, But The Actual Posting Will Be In Piee. The Proposal Shall Also Be Submitted Through The Solicitation Module In Piee. information Regarding How To Set Up A Vendor Registration Is Included In This Link: Dod Procurement Toolbox Https://dodprocurementtoolbox.com/site-pages/solicitation-module. Choose Vendor Access Instructions. contractors Must Be Properly Registered In The System For Award Management (sam) And The Joint Certification Program (jcp) In Order To Receive The Controlled Attachments. Offerors May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 1-866606-8220 Or Via The Internet At Https://www.sam.gov. Information About The Jcp Is Located At Https://public.logisticsinformationservice.dla.mil/publichome/jcp/default.aspx . The Controlled Attachments Will Be Posted At The Same Time The Solicitation Is Posted. questions Or Inquiries Should Be Directed To Clay Raber, Code 0243, Telephone 812-381-3553, Email Clayton.l.raber.civ@us.navy.mil. Please Reference The Above Solicitation Number When Responding To This Notice.

Details: Naval Supply Systems Command Weapon Systems Support (navsup Wss) - Mechanicsburg Intends To Solicit And Award A Base Five-year Requirements Contract For The Repair Of Approximately 300 Ea., Nsn: 7hh 5960 014477074, Electron Tube, Continuous Wave Illuminator (cwi) Tube, Part Number 6155775 Or Vtr-6610d1. this Action Is Being Negotiated On A Sole Source Basis With Communications And Power Industries, Llc, Cage 99313, Palo Alto, Ca In Accordance With The Statutory Authority Permitting Other Than Full And Open Competition Under Title 10 U.s.c. 2304(c)(1) As Implemented By Far Part 6.302-1. Communications And Power Industries Is The Designer And Manufacturer Of This Item. Only One Responsible Source And No Other Supplies Or Services Will Satisfy Agency Requirements. the Government Does Not Possess Or Cannot Provide The Data Necessary To Perform The Required Repairs Of The Item. repair Of The Existing Item Requires A License To Communications And Power Industries’ Proprietary Data And Methods. Further, Any New Design Would Have To Be Approved By The Government Design Agent, Naval Surface Warfare Center, Crane Division. The Time Required For Approval Of A New Design Is Normally Such That An Award Cannot Be Delayed Pending Approval; Thus, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. the Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under Authority Of Far 6.302. interested Persons May Identify Their Interest And Capability To Respond To The Requirement. this Notice Of Intent Is Not A Request For Competitive Proposals; However, Any Capability Statements Received Within Fifteen Days After Date Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete This Proposed Contract Action Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. approval Of A Source Is Required. Navsup Wss Will Not Delay Award While Source Approval Is Pending. the Point Of Contact (poc) Is Lance Geesey; E-mail: Lance.k.geesey.civ@us.navy.mil; Phone: 717-605-1303.

Details: Naval Supply Systems Command Weapon Systems Support (navsup Wss) - Mechanicsburg Intends To Solicit And Award A Base Five-year Requirements Contract For The Repair Of Approximately 125 Ea., Nsn: 7hh 5960-01-499-7172, Electron Tube, Simplified Drive (sdr) Tube, Part Number 6625287. this Action Is Being Negotiated On A Sole Source Basis With Communications And Power Industries, Llc, Cage 99313, Palo Alto, Ca In Accordance With The Statutory Authority Permitting Other Than Full And Open Competition Under Title 10 U.s.c. 2304(c)(1) As Implemented By Far Part 6.302-1. Communications And Power Industries Is The Designer And Manufacturer Of This Item. Only One Responsible Source And No Other Supplies Or Services Will Satisfy Agency Requirements. the Government Does Not Possess Or Cannot Provide The Data Necessary To Perform The Required Repairs Of The Item. repair Of The Existing Item Requires A License To Communications And Power Industries’ Proprietary Data And Methods. Further, Any New Design Would Have To Be Approved By The Government Design Agent, Naval Surface Warfare Center, Crane Division. The Time Required For Approval Of A New Design Is Normally Such That An Award Cannot Be Delayed Pending Approval; Thus, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. the Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under Authority Of Far 6.302. interested Persons May Identify Their Interest And Capability To Respond To The Requirement. this Notice Of Intent Is Not A Request For Competitive Proposals; However, Any Capability Statements Received Within Fifteen Days After Date Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete This Proposed Contract Action Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. approval Of A Source Is Required. Navsup Wss Will Not Delay Award While Source Approval Is Pending. the Point Of Contact (poc) Is Lance Geesey; E-mail: Lance.k.geesey.civ@us.navy.mil; Phone: 717-605-1303.

Details: Description:- Supplying, Fabrication, Assembling Of All Types Of Steel Girders Of Specified Spans With structural Steel Conforming To Quality "b0" Grade Designation E250 Conforming To Is:2062, Erection / slewing / End Launching Of Steel Girders With Cranes Or Any Other Approved Launching Methods As Per site Conditions (not Requiring Traffic Block) On Sub-structure Including Provision Of Trolley Refuges Etc., complete As Per Approved Qap And Drawings Conforming To Irs-b1-2001 And Other Relevant Codes and Specifications. Note: 1. Detailed Fabrication And Erection Drawings & Launching Methodology Will be Prepared By The Contractor And Got Approved From Railway. 2. The Rate Is All Inclusive Including launching In Position, Complete In All Respect Except Cost Of (i) Painting / Metalising; (ii) Bearings & (iii) hsfg Bolts Which Shall Be Paid Extra Under Relevant Item. 3. The Payment Shall Be Made On The theoretical Weight Of Main Components And Gusset Plates Only. 4. Payment Schedule: (i) Receipt Of material At Site: 40% (ii) Fabrication Of Girders: 20% (iii) Erection/launching: 20% (iv) Completion In all Respects: 20% Plate Girder/semi Through Girder/composite Girder (steel Work)

Details: Peeled, Ground, Straightened and 100% Magna Flux Crack tested Spring Steel Round bars Size 42.1 m m Diameter x 4460 mm long material grade 52Cr4Mo2V according to IS-3195-92 [Amendment No.2 of Sep.2000 or l atest] and RDSO Specification No. WD-01-HLS-94 Rev.04 of June-2022 or latest. Chemical Composition shall be as pe r Clause No. 2.1 of RDSO Specification No. WD-01-HLS-94 Rev.04 of June-2022 or latest. Dimensional tolerance in Di ameter shall be +0.1mm/-0.0 mm and in length shall be within +10.0mm/- 0.0 mm. Manufacturing Process, Rolling Reduction Ratio, Surface Quality, Shape and Dimensions, Testing of Raw Material and other Technical Requirements shall conform to RDSO Specification No. WD-01-HLS-94 Rev.04 of June-2022 or latest. Corrosion Protection: A thin co rrosion protection layer shall be provided on the bar/rod before dispatch. Corrosion protection shall be adequate to l ast for the period of two months under storage in covered place. This shall not be in the form of oil/grease to prevent bar slippage during end tapering operation. The chemical used for such as to burn off or vaporize during heating at t emperature of 150 degree Celsius and above leaving no residue. Packing: [1.1] The bars shall be tightly packed in th e form of bundles of approximately one MT each. Each bundle may be wrapped preferably with biodegradable mater ial for packing. If any plastic material is used for packing necessary government guidelines should be followed. Bundl e may firmly be strapped with metallic strips at least at four equidistant places. The entire packing shall be adequat e to prevent water ingress inside packing covers and shall withstand movement without creating any rubbing mark d uring transit and handling.[1.2] In case the bars are transported by trucks, adequate wooden packing shall be provid ed below the bundles to prevent any deviation in straightness and to ensure the hook of the lifting tackle of the over head crane is easily inserted during lifting the bundles. [ Warranty Period: 60 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age

Details: Peeled, Ground, Straightened and 100% Magna Flux Crack tested Spring Steel Round bars Size 33.6 m m Diameter x 4240 mm long material grade 52Cr4Mo2V according to IS-3195-92 [Amendment No.2 of Sep.2000 or l atest] and RDSO Specification No. WD-01-HLS-94 Rev.04 of June-2022 or latest. Chemical Composition shall be as pe r Clause No. 2.1 of RDSO Specification No. WD-01-HLS-94 Rev.04 of June-2022 or latest. Dimensional tolerance in Di ameter shall be +0.1mm/-0.0 mm and in length shall be within +10.0mm/- 0.0 mm. Manufacturing Process, Rolling Reduction Ratio, Surface Quality, Shape and Dimensions, Testing of Raw Material and other Technical Requirements shall conform to RDSO Specification No. WD-01-HLS-94 Rev.04 of June-2022 or latest. Corrosion Protection: A thin co rrosion protection layer shall be provided on the bar/rod before dispatch. Corrosion protection shall be adequate to l ast for the period of two months under storage in covered place. This shall not be in the form of oil/grease to prevent bar slippage during end tapering operation. The chemical used for such as to burn off or vaporize during heating at t emperature of 150 degree Celsius and above leaving no residue. Packing: [1.1] The bars shall be tightly packed in th e form of bundles of approximately one MT each. Each bundle may be wrapped preferably with biodegradable mater ial for packing. If any plastic material is used for packing necessary government guidelines should be followed. Bundl e may firmly be strapped with metallic strips at least at four equidistant places. The entire packing shall be adequat e to prevent water ingress inside packing covers and shall withstand movement without creating any rubbing mark d uring transit and handling.[1.2] In case the bars are transported by trucks, adequate wooden packing shall be provid ed below the bundles to prevent any deviation in straightness and to ensure the hook of the lifting tackle of the over head crane is easily inserted during lifting the bundles. [ Warranty Period: 60 Months after the date of delivery ] [Quan

Description: CATEGORY: NYLOCK NUT,M12 MULTI 1DOT75MM , LPG-3610258543 SPRING TRACTOR,MTC2418 , LPG-3610258923 SPACER-DIA- 50 MULTIPLY 30DOT2 MULTIPLY 2MM , LPG-3610258553 AIR TANK CLAMP BOLT , LPG-3610258933 HEX NUT-M6 , LPG- 3610258943 SCREW HEX M6 MULTIPLY 25 , LPG- 3610259293 PLAIN WASHER M8 NEW SHEET METAL , LPG- 3610258563 WASHER PLAIN M12-2DOT5MM , LPG- 3610258573 SPRING WASHER B 6 , LPG-3610259233 SPRING WASHER B 8 , LPG-3610259253 SPRING WASHER B 12 , LPG-3610258953 HEX SCREW M8MULTIPLY25 , LPG- 3610258483 HEX NUT-M8MULTIPLY1DOT25MM , LPG- 3610258493 PLAIN WASHER M6 , LPG-3610259303 LEVER MTG BKTDOT120MULTIPLY100MULTIPLY3MM WT-0 DOT 206 KG , LPG-3610258673 FORK MTG BUSH FAB LHS WT- 1DOT699 KG , LPG-3610258963 PIN SERVO-DIA 10MULTIPLY45MM WT-0DOT031 KG , LPG-3610258973 PIN- DIA-10MULTIPLY45MM WT-0DOT030 KG BREAK ASSY , LPG- 3610259263 FERRULE 3 by16INCH , LPG-3610259183 ADOPTER-22MULTIPLY 1DOT 5by18 MULTIPLY1DOT5-M18 MULTIPLY 1 DOT5 M22 MULTIPLY 1 DOT 5 , LPG-3610258583 ADOPTER 16 MULTIPLY 1-1by2 MULTIPLY 12 L DOT , LPG- 3610259193 ADOPTER 14 MULTIPLY 1-1by2 MULTIPLY 12L DOT , LPG-3610258593 DOWTY SEAL METRIC-M16 , LPG- 3610259203 DOWTY SEAL METRIC-M14 , LPG-3610258983 DOWTY SEAL METRIC-M22 , LPG-3610259333 AIR TANK MTG BRACKET 0DOT675 KG , LPG-3610258863 CYL MTG FLAT- 880 MULTIPLY 100 MULTIPLY 10 , LPG-3610258733 14XW- PIN FAB WITH PLATE LH HYBRID , LPG-3610259213 14XW- PIN FAB WITH PLATE RH HYBRID , LPG-3610250393 PNEUMATIC PU PIPE ASSY-675MM , LPG-3610250403 PNEUMATIC PU PIPE ASSY-800MM , LPG-3610259343 PNEUMATIC PU PIPE ASSY-1350MM , LPG-3610258993 PNEUMATIC PU PIPE ASSY-5200MM , LPG-3610259123 PNEUMATIC PU PIPE ASSY-5600MM , LPG-3610259133 LOCK NUT M22 , LPG-3610250573 FILTER ELEMENT-018-CE-100- 25 , LPG-3610250063 FILTER LUB OIL , LPG-3610250053 FUEL FILTER ELEMENT , LPG-3610258503 ENGINE OIL CF4 10LTRDOT PACK , LPG-3610258513 OIL SEAL CRANK SHAFT REAR END , LPG-3610259143 CLUTCH DISC HYDRA LUK INDIA , LPG-3610258173 CLUTCH RELEASE BEARING SC 6010T2RLU , LPG-3610258523 BALL BEARING 6203ZZ , LPG-3610259153 HEAD GASKET-S4 , LPG-3610259003 JOINT SUMP TO BLOCK FRONT , LPG-3610259273 JOINT SUMP TO BLOCK REAR , LPG-3610258453 SLI-HYDRA-12V , LPG- 3610258763 DRIVER SEAT UNIVERSAL TYPE FOR CRANE , LPG-3610250083 HYDRAULIC STRAINER-003SC2040 , LPG- 3610250453 PULLEY SMALL , LPG-3610250463 BUSH PULLEY-DIA-60 MULTIPLY 55MM CAST NYLON -WT- 0DOT049 KG , LPG-3610258843 GEAR OIL EP 90-20 LTR PACK , LPG- 3610259033 HYDDOT OIL AW 68 20 LTR PACK , LPG- 3610258753 COUNTER BALANCE VALVE - TUCSON , LPG- 3610258293 HOSE-1by2INCH BSPMULTIPLY 1by2 INCH BSP ST TO 90 L 650MM-SAE -100R2AT , LPG-3610258443 ADOPTER-1by2INCH MULTIPLY 1by2INCH BSP L 92MM , LPG- 3610258873 DOWTY SEAL 1by2INCH BSP , LPG-3610258463 O RING-4 MULTIPLY 4 , LPG-3610258473 O RING 28 MULTIPLY 3 DOT 5MM , LPG-3610259023 DOWTY SEAL 1INCH BSP , LPG-3610259073 DOWTY SEAL 3by4 INCH BSP , OVERHAULING SERVICE CHARGE FOR ACE MAKE HYDRA