Crane Tenders

Description: Public tender Vob/a Demolition and dismantling work (din 18 459); Floor covering work (din 18 365); Screed work (din 18 353); Tiling and panel work (din 18 352); Scaffolding work (din 18 451); Painting and varnishing work - coatings (din 18 363); Bricklaying (din 18 330); Plastering and stucco work (din 18 350); Wallpapering (din 18 366); Drywall work (din 18 340); Carpentry and timber construction work (DIN 18 334); Demolition and dismantling work (DIN 18 459); Construction site equipment: Construction site equipment including mobile crane 1 piece; Construction fence, wire mesh with privacy net 250 m; Construction road + container parking areas, mineral mixture 200 m²; Lawn finishing care 350 m²; Work protection: 1-chamber lock 12 pieces; Partitioning, fiber-tight and stable 250 m²; Material airlock and personnel airlock; Scaffolding work: Facade/roof scaffolding, 2 kN/m², W06 2300 m²; Provision for scaffolding 78200 m²wo; Dismantling of contaminated building materials: Demolition of asbestos cement ventilation ducts 12 pieces; Demolition of asbestos-containing flexible panels + adhesive 215 m²; Demolition of KMF impact sound insulation, D=15mm 1250 m²; Demolition of PK-containing release paper 1100 m²; Demolition work: Demolition of tiles 750 m²; Demolition of PVC floor covering 900 m²; Demolition of cement screed 360 m²; Demolition of interior wall plaster 4200 m²; Demolition of ceiling plaster + reed mats 1590 m²; Demolition of interior doors + frames 95 pcs.; Shell work: Making / widening door openings 31 pcs.; Making masonry pillars 19 pcs.; Making foundations for external staircase 1 m³; Core drilling 138 pcs.; Roofing work: Installing line ventilators in interlocking tile roof 15 pcs.; Sun protection: Venetian blinds for windows 98 pcs.; Locksmith: External staircase 1 pc.; Adjusting balcony railings 15 pcs.; plastering work: lime cement ceiling plaster 462 m²; gypsum ceiling plaster 1250 m²; lime cement wall plaster 152 m²; gypsum wall plaster 1670 m²; screed work: quick cement screed, D= 40-45 mm 1230 m²; floor covering work: linoleum covering 1160 m²; drywall work: dry screed/rock wool insulation panels D= 100 mm 609 m²; plasterboard assembly walls 469 m²; plasterboard installation walls 116 m²; plasterboard sub-ceiling 832 m²; plasterboard suspended ceiling 340 m²; tiling and natural stone work: floor tiles 84 m²; wall tiles 53 m²; carpentry work: tea kitchens 2 pcs.; interior doors office doors 23 pcs.; Damp room doors 14 pieces; metalwork: aluminum frame doors 16 pieces; sheet steel doors including frames 11 pieces; painting work: glass fabric wallpaper + emulsion paint walls 2800 m²; coating suspended plasterboard ceilings 1171 m²; coating steel perimeter frames 44 pieces; coating sheet steel doors with frames 10 pieces; overhaul coatings walls + ceilings 940 m²; industrial floor coating epoxy resin 290 m²; building cleaning work: intermediate and final cleaning 1600 m²; locking system: BKS profile double cylinder 49 pieces; digital double knob cylinder 27 pieces; transponder 100 pieces; panic lock 34 pieces; access control smart relay 11 pieces, programming device + locking plan creation HLS + building automation: -1. And 2nd floor (the ground floor was already prepared in 2018): Dismantling of the complete sanitary installation from the equipment standard for apartments and equipping the building with sanitary facilities for an office building, consisting of dismantling 31 hand basins, 21 toilets/urinals, 12 shower trays and 6 bathtubs with vanity units, shower partitions and small parts, equipping the new toilet areas with 9 hand basins, 11 toilets, 2 urinals, 1 shower tray, 2 sinks, each with support frames, instantaneous water heaters and sanitary accessories and installations for two kitchen sinks, 150 m of PP+SML waste water pipes, 200 m of stainless steel drinking water pipes with press connections and thermal insulation, 16 fire extinguishers with wall boxes, dry riser with three feed-in and 15 extraction points with pipes. -approx. 40 new radiators with approx. 180 m of C-steel pipes. -12 fans for toilet exhaust air in accordance with DIN 18017-3 and one for battery room exhaust air with PPS pipes, four split air conditioning units. -Approx. 350 sprinkler heads, approx. 500 m of sprinkler pipes for a wet and a dry system, sprinkler distributor, a sprinkler station, nitrogen generator. -Building automation with simple monitoring tasks. Electrics: Installation cable NYM-J 3x2.5 mm² various. Installation types approx. 6,000 m, installation cable Nym-j 3x1.5 mm² approx. 3,500 m, cable halogen-free Nhxhx-j-fe180 up to 3x2.5 mm² approx. 2,000 m, installation cable E 30 up to 4x2x0.8 mm approx. 2,300 m, installation distributor 230 VI 250 A indoor installation wall mounting 8 pieces, circuit breaker 1-pole character b 16a 250 pieces, cable tray perforated steel strip galvanized H 60mm W up to 600 mm approx. 300 m, electrical installation duct device installation H/w 60/130mm plastic approx. 650 m, Bap-LED surface-mounted light 35W approx. 154 pieces, LED recessed downlight D=235mm, 16 W approx. 65 pcs., LED safety lights approx. 65 pcs., LED escape sign lights approx. 40 pcs., BMA signal generator optical flashing light approx. 100 pcs., loudspeaker for wall and ceiling mounting up to 2x6 W approx. 110 pcs., data cable Cat. 6a various installation types approx. 12,000 m, data connection box sym. Cat. 6a 2 ports approx. 170 pcs.

Description: Public tender Vob/a Demolition and dismantling work (din 18 459); Floor covering work (din 18 365); Screed work (din 18 353); Tiling and panel work (din 18 352); Scaffolding work (din 18 451); Painting and varnishing work - coatings (din 18 363); Bricklaying (din 18 330); Plastering and stucco work (din 18 350); Wallpapering (din 18 366); Drywall work (din 18 340); Carpentry and timber construction work (DIN 18 334); Demolition and dismantling work (DIN 18 459); Construction site equipment: Construction site equipment including mobile crane 1 piece; Construction fence, wire mesh with privacy net 250 m; Construction road + container parking areas, mineral mixture 200 m²; Lawn finishing care 350 m²; Work protection: 1-chamber lock 12 pieces; Partitioning, fiber-tight and stable 250 m²; Material airlock and personnel airlock; Scaffolding work: Facade/roof scaffolding, 2 kN/m², W06 2300 m²; Provision for scaffolding 78200 m²wo; Dismantling of contaminated building materials: Demolition of asbestos cement ventilation ducts 12 pieces; Demolition of asbestos-containing flexible panels + adhesive 215 m²; Demolition of KMF impact sound insulation, D=15mm 1250 m²; Demolition of PK-containing release paper 1100 m²; Demolition work: Demolition of tiles 750 m²; Demolition of PVC floor covering 900 m²; Demolition of cement screed 360 m²; Demolition of interior wall plaster 4200 m²; Demolition of ceiling plaster + reed mats 1590 m²; Demolition of interior doors + frames 95 pcs.; Shell work: Making / widening door openings 31 pcs.; Making masonry pillars 19 pcs.; Making foundations for external staircase 1 m³; Core drilling 138 pcs.; Roofing work: Installing line ventilators in interlocking tile roof 15 pcs.; Sun protection: Venetian blinds for windows 98 pcs.; Locksmith: External staircase 1 pc.; Adjusting balcony railings 15 pcs.; plastering work: lime cement ceiling plaster 462 m²; gypsum ceiling plaster 1250 m²; lime cement wall plaster 152 m²; gypsum wall plaster 1670 m²; screed work: quick cement screed, D= 40-45 mm 1230 m²; floor covering work: linoleum covering 1160 m²; drywall work: dry screed/rock wool insulation panels D= 100 mm 609 m²; plasterboard assembly walls 469 m²; plasterboard installation walls 116 m²; plasterboard sub-ceiling 832 m²; plasterboard suspended ceiling 340 m²; tiling and natural stone work: floor tiles 84 m²; wall tiles 53 m²; carpentry work: tea kitchens 2 pcs.; interior doors office doors 23 pcs.; Damp room doors 14 pieces; metalwork: aluminum frame doors 16 pieces; sheet steel doors including frames 11 pieces; painting work: glass fabric wallpaper + emulsion paint walls 2800 m²; coating suspended plasterboard ceilings 1171 m²; coating steel perimeter frames 44 pieces; coating sheet steel doors with frames 10 pieces; overhaul coatings walls + ceilings 940 m²; industrial floor coating epoxy resin 290 m²; building cleaning work: intermediate and final cleaning 1600 m²; locking system: BKS profile double cylinder 49 pieces; digital double knob cylinder 27 pieces; transponder 100 pieces; panic lock 34 pieces; access control smart relay 11 pieces, programming device + locking plan creation HLS + building automation: -1. And 2nd floor (the ground floor was already prepared in 2018): Dismantling of the complete sanitary installation from the equipment standard for apartments and equipping the building with sanitary facilities for an office building, consisting of dismantling 31 hand wash basins, 21 toilets/urinals, 12 shower trays and 6 bathtubs with vanity units, shower partitions and small parts, equipping the new toilet areas with 9 hand wash basins, 11 toilets, 2 urinals, 1 shower tray, 2 sinks, each with support frames, instantaneous water heaters and sanitary accessories and installations for two kitchen sinks, 150 m of PP+SML waste water pipes, 200 m of stainless steel drinking water pipes with press connections and thermal insulation, 16 fire extinguishers with wall boxes, dry riser with three feed-in and 15 extraction points with pipes. -approx. 40 new radiators with approx. 180 m of C-steel pipes. -12 fans for toilet exhaust air in accordance with DIN 18017-3 and one for battery room exhaust air with piping made of PPs, four split air conditioning units. -Approx. 350 sprinkler heads, approx. 500 m of sprinkler piping for a wet and a dry system, sprinkler distributor, a sprinkler station, nitrogen generator. -Building automation with simple monitoring tasks. Electrics: Installation cable NYM-J 3x2.5 mm² various. Installation types approx. 6,000 m, installation cable Nym-j 3x1.5 mm² approx. 3,500 m, cable halogen-free Nhxhx-j-fe180 up to 3x2.5 mm² approx. 2,000 m, installation cable E 30 up to 4x2x0.8 mm approx. 2,300 m, installation distributor 230 VI 250 A indoor installation wall mounting 8 pieces, circuit breaker 1-pole character b 16a 250 pieces, cable tray perforated steel strip galvanized H 60mm W up to 600 mm approx. 300 m, electrical installation duct device installation H/w 60/130mm plastic approx. 650 m, Bap-LED surface-mounted light 35W approx. 154 pieces, LED recessed downlight D=235mm, 16 W approx. 65 pcs., LED safety lights approx. 65 pcs., LED escape sign lights approx. 40 pcs., BMA signal generator optical flashing light approx. 100 pcs., loudspeaker for wall and ceiling mounting up to 2x6 W approx. 110 pcs., data cable Cat. 6a various installation types approx. 12,000 m, data connection box sym. Cat. 6a 2 ports approx. 170 pcs.

Details: The U.s. Army Corps Of Engineers (usace), Nashville District (lrn), Intends To Issue An Invitation For Bid (ifb) Solicitation For A Firm Fixed-price (ffp) Construction Contract For The Old Hickory Sewer System Replacement Project In Hendersonville, Tn.this Is A Pre-solicitation Notice. This Notice Is Being Issued For Planning And Information Purposes Only. This Notice Is Not A Solicitation, Nor Is It To Be Construed As A Commitment By The Government. The Government Will Not Pay For Any Effort Expended In Responding To This Notice, Nor Will The Government Accept Bids As A Result Of This Notice. Point Of Contact: The Primary Contract Specialist For This Solicitation Is Kenyanna Jennings, Kenyanna.l.jennings@usace.army.mil. Any Communication Regarding This Notice Should Be Made In Writing Sent Via Email And Must Identify The Solicitation Number, Company Name, Address, Phone Number And Point Of Contact.project Description: The Scope Of This Requirement Includes The Replacement Of Existing Sanitary Sewer Lines, Construction Of New Polyethylene (pe) Force Main, One (1) Lift Station In The Left Bank Area Of Old Hickory, One (1) New Lift Station In The Old Hickory Powerhouse, One (1) New Jib Crane In The Powerhouse For Pump Removal, One (1) New Flow Meter In The New Discharge Line Of The New Lift Station In The Powerhouse, And Demolition Of The Existing Wastewater Treatment Plant (wwtp) In Hendersonville, Tennessee In Sumner County. The Anticipated Period Of Performance For The Contract Is Approximately 280 Calendar Days From The Notice To Proceed. This Description Is Not Intended To Be All Encompassing And Is Subject To Change. No Solicitation Document Exists At This Time. The Plans And Specifications Will Be Available With The Solicitation Announcement. The Anticipated Release Date For The Solicitation Is On Or Around 22 January 2025. The Solicitation Will Be Posted To Both Sam.gov And Procurement Integrated Enterprise Environment (piee) Solicitation Module. Disclosure Of Magnitude Of The Construction Project: The Estimated Price Range Is Between $1,000,000 And $5,000,000.naics Code And Sba Size Standard: 237110 ? Water And Sewer Line And Related Structures Construction; $45,000,000 Type Of Set-aside: 100% Total Small Business Set- Aside System For Award Management (sam): Bidders Are Required To Be Registered In The System For Award Management (sam) Database (https://sam.gov) And Procurement Integrated Enterprise Environment (piee) At The Time A Bid Is Submitted In Order To Comply With The Annual Representations And Certifications Requirements. Registration For Piee Is Required As This Is The Only Place Bids Shall Be Submitted.additional Information: Information Regarding Usace?s Process For Settling Requests For Equitable Adjustments And Duration Goals To Achieve Definitization Of Equitable Adjustments For Change Orders Under Construction Contracts Can Be Found By Going To Https://www.usace.army.mil/business-with-us/partnering/ Then Clicking On ?view Ffp Contract Changes Playbook Here?.specific Information Pertaining To This Procurement Will Be Available In The Solicitation. The Solicitation Documents Will Be Posted On The Sam.gov Website, Https://sam.gov And Piee Solicitation Module. It Is, And Will Continue To Be, The Responsibility Of All Potential Bidders To Monitor The Sam.gov Website For Any Amendments, Updates, Responses To Industry Questions And Answers, Etc. The Government Will Not Be Maintaining A Mailing List.instructions For Submitting Electronic Bids: In An Effort To Reduce Paperwork And Cost, All Bids Shall Be Submitted Electronically Via The Solicitation Module Of Piee Suite, As Described Below. Submissions Shall Be In Adobe Pdf Format. Electronic Bid Submissions Is Required Through The Army?s Electronic File Sharing Service In Piee (https://piee.eb.mil/). The Piee Application Is Used To Send Large Files To Individuals That Would Normally Be Too Large To Send Via Email. Information Regarding How To Set Up A Vendor Registration Is Included In This Link: Https://pieetraining.eb.mil/wbt/xhtml/wbt/portal/overview/vendorregister.xhtml. On This Page, Click On The ?vendor User Registration? Doc And It Will Take You Through The Process Of Registering As A Vendor.if You Plan On Submitting A Bid, Be Sure To Select ?sol-solicitation? In The Drop-down List And Choose The ?proposal Manager? Role To Be Given The Proper Permissions. Further Training Is Available At The Following Links: Https://pieetraining.eb.mil/wbt/xhtml/wbt/sol/index.xhtml - This Link Shows Information Regarding The Solicitation Application In Piee And The Different Roles Available.https://pieetraining.eb.mil/wbt/xhtml/wbt/sol/solicitation/proposals.xhtml - This Link Is For Bidders Regarding The Proposal Manager Function And Instruction On Submitting A Bid. Pre-bid Site Visit: Tbdofferors Are Urged And Encouraged To Inspect The Site Where Services Are To Be Performed And To Satisfy Themselves Regarding All General And Local Conditions That May Affect The Cost Of The Contract Performance (far 52.237-1, Site Visit). ** All Participants Are Required To Have Personal Protective Equipment, I.e. Hard Hat, Safety Glasses, Reflective Vests, And Steel-toed Shoes Before Entering The Project Site. Attendees Who Do Not Have These Items Present At The Site Visit May Not Be Able To Participate In The Visit.an Approved Site Visit Request Form Will Be Needed For Each Individual Attendee. This Will Be The Only Site Visit For This Project. If You Miss The Scheduled Event, No Other Arrangements Will Be Made Due To Personnel And Time Restrictions.u.s. Citizens: To Register For The Pre-bid Site Visit, U.s. Citizens Must Fill Out A U.s. Citizen Site Visit Request Form And Submit To The Point-of-contacts (poc) Listed Below No Later Than Seven (7) Calendar Days Prior To The Site Visit. Foreign Nationals (fns): To Register For The Site Visit, Foreign Nationals (fns) Shall Submit A Completed Fn Site Visit Request Form And Legible Color Copies Of Two (2) Of The Following Documents: Passport (unexpired Or Expired), Certificate Of U.s. Citizenship (ins Form N-560 04 N-561), Certificate Of Naturalization (ins Form N 550 Or N-570), Unexpired Foreign Passport With I-551 Stamp Or Attached Ins Form I-94 Indicating Unexpired Employment Authorization, An Alien Registration Receipt Card With Photo (ins Form I-151 Or I-551), Unexpired Temporary Resident Card (ins Form I-688), Unexpired Employment Authorization Card (ins Form I-688a), Unexpired Reentry Permit (ins Form I-327), Unexpired Refugee Travel Document (ins- Form I571), Or Unexpired Employment Authorization Documentation Issued By The Ins Which Contains A Photograph (ins Form I-688b) To The Lrn Poc. These Documents Must Be Submitted Thirty (30) Calendar Days Prior To The Pre-bid Meeting. Exceptions Will Be Considered On A Case-by-case Basis But Will Be Limited. Both The U.s. Citizen Site Visit Request Form And The Fn Site Visit Request Form Are Provided On Sam.gov With This Notice. Only Two (2) Persons From Each Business Entity Will Be Permitted To Attend The In-person Site Visit. Any Persons Without An Approved U.s. Citizen Site Visit Request Form Or Fn Site Visit Request Form Will Be Removed From Both The Site Visit.point-of-contact: Please Submit All Site Visit Request Forms To Kenyanna Jennings At Kenyanna.l.jennings@usace.army.mil And Samantha (dani) Bautch At Samantha.d.bautch@usace.army.mil. When You Send Your U.s. Citizen Site Visit Request Form Or Fn Site Visit Request Form, Please Put ?w912p525ba001 (foreign National Or U.s. Citizen) Request Form- (your Company Name)? In The Subject Line Of The Email. Please Edit The Information In Parenthesis To Match The Request Form You Submit And Your Company Name.

Details: Amending Solicitation To Provide An Updated Attachment 0002 - Price Matrix 30dec2024. All Other Terms And Conditions Remain The Same. this Is A Combined Synopsis/solicitation For Commercial Products Or Commercial Services Prepared In Accordance With The Format In Far Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes Only The Solicitation; Quotes Are Being Requested And A Formal Solicitation Will Not Be Issued. this Is A Request For Quote (rfq) Using Far Part 12, Acquisition Of Commercial Items; The Solicitation Number Is W519tc25qnitr For Potassium Nitrate Class 1, Mil-dtl-156d. the Solicitation And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2024-03. As A Result Of The Updated Federal Acquisition Circular, A New Clause, 52.204-27 Prohibition On A Byte Dance Covered Application (jun 2023), Has Been Incorporated Into This Solicitation And Falls Under 52.212-5. the Naics Code For This Procurement Is 325998 All Other Miscellaneous Chemical Product And Preparation Manufacturing. The Small Business Size Standard For This Naics Is 650. The Product Service Code Is 1370 Pyrotechnics. offerors Must Be Registered Within The System For Award Management (sam) Database At Time Of Response To This Solicitation. The Website For Sam Is Https://www.sam.gov/. addendum To 52.212-1, Instructions To Offerors – Commercial description: please See Attachment 0002 – Pricing Matrix For Clin Structure. **see Attachment 0001 – Purchase Description - Mil-dtl-156d, 23dec2024, And Attachment 0005- Rfq Questionnaire – 17dec2024. type Of Acquisition And Contract award Will Be Made Using Best Value, Resulting In A Single Award Firm Fixed Price Contract. place Of Performance performance Will Be Fob Destination At The Following: 300 Highway 361 crane In 47522 b3608 proposal Submission Requirements offerors Shall Submit The Following In Response To This Solicitation: price – Offerors Must Submit Completed Price Matrix At Attachment 0002. All Sections Shall Be Completed. Prices Shall Be Stated To 2 Decimal Places. completed Provision At Attachment 0003 – Far 52.204-24, Paragraph (d)(1) And (d)(2). completed Provision At Attachment 0004 – Far 52.212-3 Alt 1, Paragraph (b) Only. completed Responses To The Questions Provided In The Rfq Questionnaire In Attachment 0005. part One: Evaluation Factor 1 – Technical quoters Shall Submit Responses To The Responses To The Rfq Questionnaire Provided At Attachment 0005 That Correspond To This Solicitation. do Not Include Specific (individuals’) Names Of Government And/or Contractor Personnel. do Not Include Price/rates. part Two: Evaluation Factor 2 – Price quoters Shall Adhere To The Instructions On The Government Provided Price Matrix (attachment 0002) And Fully Complete All Required Fields. basis For Award the Government Will Award One (1) Award To The Offeror Whose Offer Who Provides The Best Value To The Government Using A Lowest Price Technically Acceptable (lpta) Approach. 1. This Order Will Be Awarded On The Basis Of Technical Acceptability And Price. 2. The Basis For Technical Acceptance Is Whether All The Requested Items Are Provided In The Quote Presented By The Offeror. The Items Presented Should Match The Technical Specifications And Not To Exceed Quantity. 3. Following, The Determination Of Technical Acceptance, The Lowest Price Of The Technically Acceptable Quotes Will Receive The Award. 4. In Accordance With Far 52.212-1(g), Quotations Are Intended To Be Evaluated And The Award Made, Without Discussions, Unless Discussions Are Determined Necessary. 5. Total Price Is Calculated As The Sum Of All Clins Added Together. 6. The Government Reserves The Right To Award Based On The Contractor’s Location. evaluation Criteria the Government Will Evaluate Quotations As Follows: factor 1: Technical: the Government Will Evaluate Factor 1, Technical, Using The Following Criteria: demonstration Of A Clear Understanding Of The Requirements And Deliverables, And On The Offeror’s Expressed Ability To Successfully Perform. The Offerors Will Be Evaluated Based On Responses To Three Criteria: Technical Expertise/ Experience, Project Team, And Technical Approach. if The Quotation Sufficiently Addresses The Rfq Questionnaire And Demonstrates A Clear Understanding And Ability To Perform The Requirement, Then The Government Will Accept Without Further Explanation That The Contractor Can Perform All Pd Requirements. The Quoter May Discuss Non-critical Requirements. However, If The Quoter Provides Statements Which Cause The Government To Question The Quoter’s Ability To Perform Those Non-critical Requirements, Such Statements Will Be Evaluated Accordingly. technical Will Be Rated Using The Following Standards In Table 1: technical Ratings description outstanding this Rating Is Only Available To Those That Have Attended The Site Visit In Addition To The Following: Quotation Indicates An Exceptional Approach And Understanding Of The Requirements And Contains Multiple Strengths. Established Team Has An Extensive Background In Explosive Contaminated Facility Remediation To Include Utilizing Remote Operated Waterjet Segmentation. Quotation Includes Detailed Previous Project Experience In The Major Contract Requirements. Quote Includes A Well Thought-out Proposed Technical Approach To Each Of The Project’s Phases. good quotation Meets Requirements And Indicates A Thorough Level Of Expertise And An Understanding Of The Requirements. Established Team Has Background In Explosive Contaminated Facility Remediation And Previous Experience In The Major Contract Requirements Including Remote Operated Waterjet Segmentation. Quote Includes A Solid Technical Approach. Strengths Outweigh Any Weaknesses. Risk Of Unsuccessful Performance Is Low. acceptable quotation Meets Requirements And Indicates An Adequate Level Of Expertise And An Understanding Of The Requirements. Established Team Has An Extensive Background In Hazardous Facility Remediation And The Major Contract Requirements Including Explosives Familiarity, Although Little To No Experience In Remote Operated Explosive Contaminated Facility Remediation Specifically. Proposed Technical Approach Is Adequately Addressed, But Not Specific. Strengths And Weaknesses Are Offsetting Or Will Have Little Or No Impact On Task Order Performance. Risk Of Unsuccessful Performance Is Moderate. marginal quotation Does Not Demonstrate An Adequate Approach And Understanding Of The Requirements. Established Team Has Very Limited Background In Explosive Facility Contamination Remediation And The Major Contract Requirements. Proposed Technical Approach Is Flawed Or Is Too Vague For Government To Determine Acceptability. Risk Of Unsuccessful Performance Is High. unacceptable quotation Does Not Meet Requirements And Contains One Or More Deficiencies. Appropriate Team Has Not Been Established, Or Established Team Does Not Have Sufficient Experience To Complete The Project Tasks Without Significant Government Oversight. Risk Of Unsuccessful Performance Is High. If This Criterion Is Rated As Unacceptable, Additional Factors Will Not Be Evaluated And The Quotation Is Not Eligible For Award. definitions strength strength Is Defined As A Particular Aspect Of The Quoter’s Submission That Has Merit Or Exceeds Specified Performance Capability Requirements In A Way That Will Be Advantageous To The Government During Task Order Performance. weakness weakness Is Defined As Any Flaw In The Quotation That Increases The Risk Of Unsuccessful Task Order Performance. Deficiency Is Defined As Any Material Failure Of A Quotation To Meet A Government Requirement Or A Combination Of Weaknesses In A Quotation That Increases The Risk Of Unsuccessful Task Order Performance To An Unacceptable Level. factor 2: price the Government Will Evaluate Factor 2 – Price, For The Following: compliance: Quotations Will Be Evaluated For Compliance Based Upon The Submission Requirements Contained In The Solicitation. price Reasonableness: The Quoter’s Price Quotation Will Be Evaluated To Determine Reasonableness. In Accordance With Far 31.201-3, A Price Is Reasonable If, In Its Nature And Amount, Does Not Exceed That Which Would Be Incurred By A Prudent Person In Conduct Of Competitive Business. total Price Is Calculated As The Sum Of All Clins Added Together listing Of Attachments attachment 0001 - Pd 23dec2024 attachment 0002 - Pricing Matrix attachment 0003 - Far 52.204-24 Provision attachment 0004 - Far 52.212-3 Alt 1 Provision attachment 0005 - Rfq Questionnaire attachment 0006 - Provisions And Clauses deadline For Submission offers Are Due On 23 January 2025 No Later Than 12:30 Pm Central Time. offers Shall Be Submitted In The Following Way: electronically Via Email To The Contract Specialist, Dustin Sexton,dustin.p.sexton.civ@army.mil And Contracting Officer, Bryce Willett,bryce.t.willett.civ@army.mil. Offerors Shall Include “w519tc25qnitr Response – [insertofferor’s Name]” Within The Subject Line. questions questions Shall Be Submitted In The Same Manner As Offers, Electronically Via Email To The Contract Specialist And Contracting Officer Listed Above. **note: Interested Offerors Must Submit Any Questions Concerning This Solicitation No Later Than 08 January 2025, To Enable The Buyer To Respond. Questions Not Received Prior To 08 January 2025 Will Not Be Considered. If Needed, A Final Amendment Will Be Submitted By 15 January 2025. end Of Addendum 52.212-1

Details: Sources Sought Number: Fd-2025-071 notice Type: Sources Sought Synopsis title: Coastal Virginia Offshore Wind (cvow) Survey Mitigation Research Survey response Date: January 10, 2025 this Is A Sources Sought Synopsis And Is Not A Pre-solicitation Announcement. The Purpose Of This Market Research And Sources Sought Notice Is To Gain Knowledge Of Potential Qualified U.s. Domestic Businesses, Which Could Include Small Business, Hubzone, 8(a), Service Disabled Veteran Owned, Women Owned Small Business Firms And Even Large Businesses. Responses To This Sources Sought Synopsis Will Be Used By The Government In Making Appropriate Acquisition Decisions. background: noaa Fisheries Performs Standardized, Scientific Surveys To Assess Changes In Abundance And Population Metrics Of Fish, Invertebrates, And Protected Species Over Space And Time. In Response To The Potential Disruption Of Long-running (some More Than 30 Years) Survey Missions, The Southeast Fisheries Science Center Has Developed A Survey Mitigation Plan Intended To Guide The Development And Implementation Of A Program To Mitigate Impacts Of Wind Energy Development On Fisheries Surveys In The Southeast Region. Construction Of Wind Turbines Along The U.s. East Coast Allows For Some Feasibility Testing Of Survey Methodologies Adapted For Data Collection Within And Around Wind Farms. This Project Aims To Identify And Develop New Survey Approaches And Will Require The Contracting Of Vessel(s) That Can Support Several Scientists And Deploy And Recover Multiple Types Of Survey Gear Near The Offshore Wind Turbines Located At The Cvow Pilot Area Over The Course Of 7 Days. intended Use/purpose: we Will Test The Feasibility Of Using The Following Methodologies Within And Around Wind Farms: Diver Surveys, Video Trap Surveys, Passive Acoustic Monitoring, Echosounder, Multibeam, Ctd, Uncrewed Aerial Systems, Water Collection, Benthic Sample Collection, Uncrewed Underwater Systems. Although A Single Vessel Is Preferred, Noaa Will Also Consider Multiple Vessels Working Together As An Alternative. special Requirements/essential Salient Features: vessel Must Have, In Proper Working Order, All Required United States Coast Guard (uscg) Approved Safety, Navigation, And Communication Devices And Equipment. vessel Shall Have Sufficient Fuel Capacity To Support Operations For Seven Full Days At Sea Without Refueling. vessel Shall Have A Rear Deck Area Clear Of Obstructions For Setting Up, Stowing, Rinsing, And Dismantling Survey Gear. vessel Will Be Able To Maintain Station Using Dynamic Positioning vessel Must Have An Indoor Dry Counter Area Suitable For Project Scientists To Use Government Provided Laptops And Other Small Electronic Equipment. The Workspace Shall Include Access To Adjacent Electrical Outlets (120 Vac, 60 Hz). the Contractor Must Provide Clean And Sanitary Berthing Accommodations For Up To 8 Male And Female Government Personnel. Personnel May Share Berthing Arrangements, But Must Allow For Separate Rooms For Male And Female Personnel. Berthing Spaces Must Contain At Least One Drawer Or Closet Per Occupant For Stowage Of Clothing And Personal Gear, Lighting, Ventilation, Emergency Exit, And Separated From Machinery Or Fuel Tanks. Quarters And Furnishings Shall Contain Fireproof Installations And Co Monitors Where Applicable. berthing Requirements, Including The Number And Gender Of Government Personnel, Will Be Provided By The Project Lead Approximately Two Weeks Prior To Departure. The Project Lead And Captain Will Work Together On A Detailed Berthing Plan To Accommodate The Gender Mix Of The Government Personnel, Taking Into Consideration The Current Complement Of The Vessel. vessel Must Have A Potable Fresh Water Supply For Vessel And Personal Use (including Showers And Laundry) For All Personnel Aboard For The Duration Of The Charter. The Potable Water System Shall Have Dedicated Tanks (treated And Coated), Ventilated With Insect Screens Installed (if Appropriate), And A Dedicated Potable Water Hose With Filters That Remove Particulates Including Rust. vessel Must Provide Clean Linens Including Mattresses, Clean Fitted Sheets, Pillows, And Towels For Government Personnel. the Vessel Must Have A Minimum Of Two Heads And Two Freshwater Showers Available To Government Personnel. Additional Heads/showers Are Desired But Not Required And May Be Given Additional Consideration During Technical Evaluation. The Vessel Shall Provide Sufficient Soap, Toilet Paper, And Paper Towels For The Number Of Personnel On-board And The Duration Of The Charter. all Indoor Vessel Workspaces, Berthing, And Galley Spaces Must Be Adequately Ventilated And Free From Tobacco Smoke, Excessive Engine Noise, And Hydrocarbon Fumes. the Vessel Must Be Able To Maintain Underway Status, Including All Engine-room Functionality, For The Entire Duration Of The Charter. The Vessel Must Be Able To Maintain All Housekeeping, Deck, And Other Necessary Services While Underway Or While On-station (at Anchor Or Otherwise). vessel Captain And Crew Shall Comply With Waste Management, In An Effort To Reduce Marine Debris Pollution, Vessel Regulations As Described In Section V Of The Marpol Convention. The Vessel Is Required To Have A Storage Facility, With Or Without A Trash Compactor, To Retain All Refuse, Or A Means To Incinerate This Refuse So That It Is Not Disposed Of At Sea. the Contractor Must Provide A Captain, Appropriately Licensed By The Uscg For The Gross Tonnage Of The Vessel, For The Duration Of The Charter. The Captain Shall Be Competent In The Use Of Navigation And Safety Equipment. The Captain Shall Have Experience Launching And Recovering Scientific Equipment, Navigating Busy Waterways, And Operating In The Offshore Environment. The Captain Will Work Directly With The Chief Scientists For Matters Pertaining To Deck Layout, Berthing Arrangements, Trip Itinerary, Planning, And Operations. The Captain Will Be Familiar With All Contract And Statement Of Work Requirements. the Contractor Must Provide Adequate Crew To Meet Uscg Safe Manning Levels And Provide Appropriate Crew To Safely Conduct The Required Operations. The Contractor Must Provide Skilled Individuals On The Vessel Capable Of Crane Operations And Line Handling For Launch And Recovery Of All Small Boats And Cargo. captain And Crew Must Have All Required And Necessary Qualifications, Licenses, And Certifications Appropriate To Their Position. All Contractor Crew Will Be Physically Capable Of Performing All Required Tasks During The Charter. The Contractor Will Provide The Tpoc With The Captain And Crew Qualifications For Those Individuals That Will Be Sailing On The Charter At The Pre-charter Meeting Or No Less Than 14 Days Prior To Departure. all Contractor And Government Personnel Must Comply With Noaa And Sefsc Personnel Conduct Policies Including: Eeo, Workplace Harassment, Substance Abuse, Safety, And Environmental Awareness. A Zero Tolerance Policy For Any Type Of Harassment Will Be Enforced. The Contractor Must Provide Safe, Efficient Working Conditions And Accommodations To The Government Personnel Free From Violence, Threats Of Violence, Harassment (including Sexual Harassment), Intimidation, And Other Disruptive Behavior. The Contractor, Its Agents, Subcontractors, And Employees, Including The Captain And Crew Of The Vessel Must Not Harass, Assault, Oppose, Impede, Intimidate, Threaten, Interfere With Or Make Unwelcome Advances Toward Any Member Of Government Personnel. Violation Under This Clause May Result In Termination Of The Contract, At The Discretion Of The Government Under The Default Clause, And Consequent Liability Of The Contractor To The Government For Any Costs Incurred, As Well As Debarment, Suspension Or Similar Action From Future Participation In Government Contracts. Violation Of The Contractor’s Obligations Under This Clause May Result In Criminal And/or Civil Prosecution Of The Person(s) Involved By Either The Government Or Affected Government Personnel, As Provided By Applicable Law, As Well As Adverse Performance Evaluation Under The Terms And Conditions Of This Contract. during The Charter Period, The Possession Or Use Of Intoxicating Substances And/or Illegal Drugs, By Any Person, Is Not Permitted And May Be Grounds For Termination Of This Contract By The Government. delivery Schedule: the Cruise Must Be Completed Between April 1, 2025 And April 16, 2025. the North American Industry Classification Code (naics) Is 483114 With A Size Standard Of 550 Employees. interested Firms Shall Provide, In Writing, A Brief Narrative (no More Than 3 Pages In Length) And Documentation To Support Your Firm’s Capability And Experience Specific To Meeting This Requirement Herein And Include Your Firm’s Name, Address, Point Of Contact, Telephone Number, Sam Ueid Number, Ccr Cage Number, Business Type And Size (i.e., Small, Large, Non-profit, Educational, Etc.). Any Response That Does Not Include This Information Will Not Be Considered. The Government Will Review Your Response To Determine If Your Firm Has The Experience, Knowledge And Capability To Provide The Items As Specified Above. Do Not Provide A Generic Capabilities Statement. Only Respond With A Detailed Capabilities That Clearly Shows Capabilities To Meet The Above Specific Requirements. this Request For Information Does Not Constitute A Commitment, Implied Or Otherwise, That A Procurement Action Will Be Issued. Nor Does This Request For Information Constitute A Commitment, Implied Or Otherwise, That Any Procurement Action May Be Issued For The Government’s Requirements. no Entitlement To Payment Of Direct Or Indirect Costs Or Charges By The Government Will Arise Because Of The Submission Of Contractor’s Information. The Government Shall Not Be Liable For Or Suffer Any Consequential Damages For Proprietary Information Not Properly Identified. Proprietary Information Will Be Safeguarded In Accordance With The Applicable Government Regulations. all Contractors Doing Business With The Government Are Required To Be Registered And Active With The System For Award Management (sam) Website. note: This Sources Sought Is Not Considered A Request For Proposal But A Request For Information Only. No Solicitation Document Is Available. No Contract Will Be Awarded Based On Responses Received To This Notice. responses Shall Reference Sources Sought Fd-2025-071 And Be Sent To Amy.gilliland@noaa.gov

Details: Please Note – Nsns May Be Added To Any Subsequent Contract Per The Scope Of This Action. This Action’s Scope Is Listed Below. A Current Program Nsn Listing Is Attached To This Announcement. this Annoucement Is Linked To The Project's Sources Sought. The Sources Sought Contains Additional Program Information And A Market Survey Questionnaire. Please Feel Free To Review The Sources Sought And Provide A Response To The Market Survery Questionnaire. Please Provide Any Market Survey Responses Or Questions To Bret Griffin (bret.griffin@dla.mil) Or Robert Harris (robert.harris@dla.mil). the Jltvci Successor Project Will Be A 5 Year Multiple Award Contract(s) (mac) Supporting A Broad Range Of Joint Light Tactical Vehicles (jltv). The Proposed Contract Will Have An Ordering Period Of A Two-year Base Period, And Three (3) One-year Option Periods, Totaling Five (5) Potential Contract Years. Individual Orders Will Be Used To Supply The Items Within Scope Of This Contract. scope the Scope Of This Joint Light Tactical Vehicle Competitive Initiative (jltvci) Contract Includes Any Fully Competitive And/or Limited Source(s) Dod Or Dla Managed Product, Used By The Dod Or The Federal Government To Produce, Repair Or Replace Any Item, Or System, Used On These Joint Light Tactical Vehicles. The Weapon System Designator Codes (wsdcs) Within The Scope Of This Contract Include, But Are Not Limited To: Army J8a, And The Following Marine Wsdcs: O0m United States Marine Corps (usmc) General Purpose Truck, O1m Usmc Heavy Guns Carrier, O2m Usmc Close Combat Weapons Carrier, And O3m Usmc Truck Utility. The Federal Supply Classes (fsc) Covering These Items Include, But Are Not Limited To: 2010 Ship And Boat Propulsion Components 2510 Vehicular Cab, Body, And Frame Structural Components 2520 Vehicular Power Transmission Components 2530 Vehicular Brake, Steering, Axle, Wheel, And Track Components 2540 Vehicular Furniture And Accessories 2541 Weapons Systems Specific Vehicular Accessories 2590 Miscellaneous Vehicular Components 2805 Gasoline Reciprocating Engines 2815 Diesel Engines And Components 2910 Engine Fuel System Components, Nonaircraft 2920 Engine Electrical System Components, Nonaircraft 2930 Engine Cooling System Components, Nonaircraft 2940 Engine Air And Oil Filters, Strainers, And Cleaners, Nonaircraft 2990 Miscellaneous Engine Accessories, Nonaircraft 3020 Gears, Pulleys, Sprockets, And Transmission Chain 3030 Belting, Drive Belts, Fan Belts, And Accessories 3040 Miscellaneous Power Transmission Equipment 3110 Bearings, Antifriction, Unmounted 3120 Bearings, Plain, Unmounted 3950 Winches, Hoists, Cranes, And Derricks 3990 Miscellaneous Materials Handling Equipment 4010 Chain And Wire Rope 4130 Refrigeration And Air Conditioning Components 4210 Firefighting Equipment 4320 Power And Hand Pumps 4330 Centrifugals, Separators, And Pressure And Vacuum Filters 4710 Pipe, Tube And Rigid Tubing 4720 Hose And Flexible Tubing 4730 Hose, Pipe, Tube, Lubrication, And Railing Fittings 4810 Valves, Powered 4820 Valves, Nonpowered 4910 Motor Vehicle Maintenance And Repair Shop Specialized Equipment 5315 Nails, Machine Keys, And Pins 5325 Fastening Devices 5330 Packing And Gasket Materials 5340 Hardware, Commercial 5342 Hardware, Weapon System 5355 Knobs And Pointers 5365 Bushings, Rings, Shims, And Spacers 5430 Storage Tanks 5895 Miscellaneous Communication Equipment 5905 Resistor 5925 Circuit Breakers 5930 Switches 5935 Connectors, Electrical 5963 Electronic Modules 5970 Electrical Insulators And Insulating Materials 5985 Antennas, Waveguides, And Related Equipment 5995 Cable, Cord, And Wire Assemblies: Communication Equipment 5998 Electrical And Electronic Assemblies, Boards, Cards, And Associated Hardware 5999 Miscellaneous Electrical And Electronic Components 6150 Miscellaneous Electric Power And Distribution Equipment 6220 Electric Vehicular Lights And Fixtures 6350 Miscellaneous Alarm, Signal, And Security Detection Systems 6620 Engine Instruments 6625 Electrical And Electronic Properties Measuring And Testing Instruments 6650 Optical Instruments, Test Equipment, Components And Accessories 6680 Liquid And Gas Flow, Liquid Level, And Mechanical Motion Measuring Instruments 6685 Pressure, Temperature, And Humidity Measuring And Controlling Instruments 6695 Combination And Miscellaneous Instruments 7690 Miscellaneous Printed Matter 8145 Specialized Shipping And Storage Containers the Project Currently Contains 7210 Nsns That May Be Ordered During The Period Of Performance. items Are Continuously Being Cleared Technically, And Having Nsn Numbers Assigned To Them, So The List Of 7210 Potential Nsns Is Not The Entire List That May Be Added To This Procurement But Are Nsns That Are Known At This Time. all Items Within The Scope Of The Solicitation Will Be Considered On The Contract And May Be Ordered During The Period Of Performance. nsns Within The Scope May Be Added To This Initiative Or Any Resulting Contract At A Later Date. The Solicitation Will Include Dlad Procurement Note L27 – Addition And Deletion Of Items To Facilitate The Addition Of Any Future Nsns To This Initiative Or Any Resulting Contract(s). this Solicitation May Be The Only Planned Opportunity That A Contractor Will Have To Submit A Proposal For Nsns That Fall Within The Scope Of This Solicitation. all Responsible Sources May Submit An Offer/quote Which Shall Be Considered. one Or More Of The Items Under This Acquisition May Be Subject To An Agreement On Government Procurement Approved And Implemented In The United States By The Trade Agreements Act Of 1979. All Offers Shall Be In The English Language And In U.s. Dollars. All Interested Suppliers May Submit An Offer. the Solicitation Will Be Available On Dla’s Internet Bid Site (https://www.dibbs.bsm.dla.mil/rfp/) On Its Issue Date On Or About September 2, 2025. the Small Business Size Standard Is _1000__ Employees. drawings/specifications For Some Nsns Will Be Available Through The Dibbs Solicitation Link In The Synopsis On The Solicitation Issue Date. specifications, Plans Or Drawings Are Not Available Are Not Avaialable For All Nsns. the Total Duration Of This Action Shall Not Exceed 5 Years. while Price May Be A Significant Factor In The Evaluation Of Offers, The Final Award Decision Will Be Based Upon A Combination Of Price, Delivery, Past Performance, And Other Evaluation Factors As Described In The Solicitation.

Details: The Work Consists Of: Providing The Complete Mobilization Required For The Completion Of The Work (crane, Containers, Protection) The Removal Of The Components Of The Existing Roof Up To The Existing Concrete Decking. The Removal Of All Flashings, Existing Metal Counter-flashings At The Parapets, At The Bases Of Devices And At The Upstands Of The Walls. The Installation Of A New White Roof Composition, In Two-layer Elastomeric Membrane, With New Roof Drains. The Complete Installation Of An Anti-fall System (anchors + Lifelines). The Installation Of New Ladders

Details: The Work Consists Of: Providing The Complete Mobilization Required For The Completion Of The Work (crane, Containers, Protection) The Removal Of The Components Of The Existing Roof Up To The Existing Concrete Decking. The Removal Of All Flashings, Existing Metal Counter-flashings At The Parapets, At The Bases Of Devices And At The Upstands Of The Walls. The Installation Of A New White Roof Composition, In Two-layer Elastomeric Membrane, With New Roof Drains. The Complete Installation Of An Anti-fall System (anchors + Lifelines). The Installation Of New Ladders

Details: Request For Information (rfi) naval Facilities Engineering Systems Command(navfac) Engineering And Expeditionary Warfare Center(exwc) equipment Services Support (ess) Contracted Maintenance And Repair Contract At Naval Station Rota, Spain this Rfi Is Issued Solely For The Purposes Of Obtaining Information Not Readily Available To The Government For Planning Purposes, In Accordance With Far 15.201(e). It Does Not Constitute A Request For Proposal (rfp) Or A Promise To Issue An Rfp For Any Particular Supplies Or Services In The Future. Furthermore, The Government Is Not At This Time Seeking Proposals And Will Not Accept Unsolicited Proposals. Responders Are Advised That The Government Will Not Pay For Any Information Or Administrative Costs Incurred In Response To This Rfi; All Costs Associated With Responding To This Rfi Will Be Solely At The Interested Party’s Expense. all Interested Parties (small, Medium, And Large Businesses Concerns) Are Invited To Submit A Response. In Addition To The Information Requested By The Government, Interested Parties Are Encouraged To Provide Any Other Information They Deem Relevant. the Naval Facilities (navfac) Engineering And Expeditionary Warfare Center (exwc) Has A Potential Requirement For A Firm Fixed Priced, Indefinite Delivery Indefinite Quantity (idiq) To Establish An Equipment Services Support (ess) Maintenance And Repair Contract At Naval Station Rota, Spain (navsta Rota) With A 60-month Ordering Period. Exwc Is Conducting Market Research To Determine The Range Of Available Contractors And Assess Their Capabilities To Support The Navy’s Maintenance And Repair Support Contract On Navsta Rota. The Intent Of This Ess Contract Is To Have One Or More Contractors Provide Intermediate And Depot Level Maintenance And Repair Services On Naval Expeditionary Equipment Assets Located At Navsta Rota. This Support Would Include: Inspections, Maintenance, Refurbishment, Repairs, Upgrades, Modernization, And Modifications Provided To Support Of The Naval Construction Equipment And Support Vehicles That Have Deteriorated (to Various Degrees) Into A Defective, Damaged, Or Reduced Operational Condition. the Government Plans To Award The Contracted Maintenance And Repair Contract Under One Of The Following Naics Codes: 811310: Commercial And Industrial Machinery And Equipment (except Automotive And Electronic) Repair And Maintenance the Government Intends To Allow Award Of Fixed-price Task Orders Under This Idiq Contract.the Period Of Performance Or Delivery Dates For Task Orders Will Be Determined At The Individual Task Order Level. location Of Work. If Implemented, It Is Anticipated At This Time That Some Portion Of The Work Would Be Performed At The Designated Repair Facility And/or At Other Locations On Navsta Rota. Although Subject To Change, The Following Provides An Overview Of The Current Location Strategy. maintenance And Repair Services annual Safety Inspections (avsi) perform Pre-operational Checks perform Services In Accordance With Manufacturers Recommended Specifications troubleshoot Automotive And Equipment Mechanical Andelectrical Issues cycling Of Equipment spot Checks load Testing Of Generators replacement Of Tires container Repair vehicle And Equipment Restoration diesel Engine Repair transmission And Drive Train Repair repair And/or The Individual Replacement Of Automotiveand Equipment Mechanical And Electrical Parts/devices replacement Of Body Components. ability To Source Original Equipment Manufacturer Parts; And If Required, After Market Equivalents, Rebuilt, Orused Suitable Substitutes size Of Scope. If Implemented, The Contractor Would Be Responsible For Inspections, Maintenance, And Repair Of Naval Construction Equipment And Support Vehicles. Currently There Are Approximately 650 Individual Pieces Of Naval Construction Equipment And Support Vehicles Assigned To Naval Expeditionary Forces That Potentially Could Be Supported By The Maintenance And Repair Program. equipment Range. The Following List Is Intended To Provide A Small Sample Of Naval Construction Equipment And Support Vehicles That May Be Included In The Maintenance And Repair Program; It Is Not Intended To Be An All-inclusive List. Naval Construction Equipment Is Composed Of A Mixture Of Civil Engineering Support Equipment (cese), Material Handling Equipment (mhe), Weight Handling Equipment (whe), A Variety Of Support Equipment. The Exact Make-up Of Equipment Make, Model, And Type Will Change Over Time Based On The Needs Of The Navy. (1) Automotive Vehicles (e.g. Trucks, Truck Tractors, Buses, Etc.) (2) Heavy And Light Construction Equipment (includes Motorized And Non-motorized Equipment) (3) Material Handling Equipment (e.g. Forklifts, Tele-handlers, Container Handlers, Etc.) (4) Weight Handling Equipment (i.e. Cranes) (5) Specialized Construction Support Equipment (e.g.light Plants, Air Compressors, Portable Welders, Etc.) (6) Power Support Equipment (i.e. Generators, Ecu(environmental Control Units), Portable Power Panels,etc.) (7) Trailers (e.g. Towable, Fifth-wheel, Etc.) (8) International Standard Organization (iso) Shippingcontainer ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ the Government Will Not Award A Contract On The Basis Of This Rfi And Will Not Reimburse Or Otherwise Pay For Any Information Received.this Rfi Is Issued For The Purpose Of Encouraging Communication And Exchanges Of Information Between The Government And Interested Parties. Responses To This Request Are Voluntary And The Government Will Not Pay Any Direct Or Indirect Costs For Any Information Or Materials Received In Response To This Rfi. Information Received In Response To This Rfi May Be Used To Structure Future Solicitations. All Responses Received May Be Held For An Extended Period Of Time Or Destroyed. In No Case Will Any Responses To This Rfi Be Returned To The Originator Or Information Submitted Shared With Any Other Respondents. Respondents Will Not Be Notified Of The Results Of The Market Research, Nor Will The Government Provide Feedback To Respondents With Respect To Any Information Submitted Under This Rfi.proprietary Data Shall Not Be Submitted. an Award Will Not Be Made Based On Any Information Or Offers Received In Response To This Notice. Not Responding To This Rfi Does Not Preclude Participation In Any Future Rfp, If Any Is Issued. If A Solicitation Is Released, It Will Be Synopsized On The System For Award Management (sam) Website. It Is The Responsibility Of The Potential Offerors To Monitor Those Sites For Additional Information Pertaining To This Requirement. please Provide Comments Or Questions Regarding The Proposed Strategic Service Contract Described In This Rfi. one Electronically Submitted Response Shall Be Received No Later Than 5:00pm Eastern Time On 08 November 2024 And Reference: Equipment Services Support (ess) Contracted Maintenance And Repair Contract At Naval Station Rota, Spain. submissions Should Be Limited To Ten Megabytes Or Less; And In A Format Compatible With Microsoft Office Or Adobe Pdf, And Includeattachment 1: Corporate Background Information Questionnaire interested Businesses Shall Submit Responses By Email To Desiree E. Garcia At Desiree.e,garcia9.civ@us.navy.mil And Jake O. Blas, Jake.o.blas.civ@us.navy.mil. Please Submit All Written Questions By Email To Desiree E. Garcia And Jake O. Blas. No Phone Or Email Solicitations With Regards To The Status Of Any Subsequent Rfp Will Be Accepted Prior To Its Release.

Purchaser Name: COMMUNAL POTENT PAYMENT OF PRESCHOOL ENCLOSURE THE CRANE OF YAKUSHINETSKY FOR THE SAKE OF | Поставка (передача) Товару Здійснюється Дрібними Партіями Транспортом Постачальника Один Раз На Тиждень З 08:00 До 15:00 Години, (транспортом З Дотриманням Санітарно-гігієнічних Умов Зберігання Та Перевезення Товару), Згідно Попереднього Зроблених Заявок. Замовник Має Право В Окремих Випадках Зумовлених Зменшенням Фактичного Відвідування Дітей Навчального Закладу У Зв’язку З Не Передбачуваними Обставинами (дострокові Канікули, Карантин, Тощо), Зменшити Або Змінити Обсяг Замовлення До П’ятниці Кожного Тижня Відносно Попередньо Наданих Заявок.