Crane Tenders

Description: Rfq No. 2025-02-002; P.r. No. 2024-02-004 Dated 02/13/2025: Procurement Of Various Vehicle Parts And Accessories, For Use In The Corrective Maintenance Of Sany Rough Terrain Crane With Dpwh No. F5-373 , Vehicle Parts And Accessories ,department Of Public Works And Highways - Region Xi

Description: 24gdn0013-procurement Of One (1) Unit Hybrid 4x2 Pick-up And One (1) Unit 700p 17ft Selfloader Truck With 5t Crane, Sidings And Flat Ramp 190 Hp For Dpwh Rizal 1st District Engineering Office Binangon , Vehicles ,department Of Public Works And Highways - Rizal 1st Ed

Description: 14.04.25.03.2063 = 18.000 Mts Scrap Condemned Part Of Machinery I.e C Clam, Water Pump Sets ,pressure Tank, Various Type Of Bearings ,vacuum Cylinders , Concert Mixer Parts ,ci Blocks, Ms Crane Chain Attach With Hook, Ring & Wire Rope, Pulley In Complete And Broken Condition, I.e Various Type Of Machine Part ,vehicle Parts, , Small Wheels Sets ,machine Wheels And Cut Pcs Of Loco Wheel Disc, Other Ms/gi/ci/ss Machine Parts ,gear Wheel, Deep Lorry Wheel, Gi Pipe Attached With Valve, Hand Scales Parts Of All Sorts And Sizes Attached With Ss/ms Nuts, Bolts, Washers & Other Accessories All Parts Dismantle Condition With Or Without Minor N/f Attachment If Any. Lot At Two Stacks Location: Area A, Adj. Line No. 02 And Shed No.07 Stock Holder: Cdms Ward No. 04/ Smm (md) Mmr Remarks: It Is Advised To Bidder To See The Lot Personally Before Bidding For The Lot.

Description: Appointment Of A Service Provider To Provide Waste Collection Service With Waste Compactor Trucks, Multipurpose Crane Trucks, Front-end Loader And Tractor-loadrer-backhoe (tlb) For Waste Collection Services At Mankweng, Sebayeng And Dikgale Clusters For A Period Of Three(03) Years On An Adhoc Basis.

Details: This Is A Combined Synopsis/solicitation For Commercial Products Or Commercial Services Prepared In Accordance With The Format In Far Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes Only The Solicitation; Quotes Are Being Requested, And A Formal Solicitation Will Not Be Issued. this Is A Request For Quote (rfq) Using Far Part 12, Acquisition Of Commercial Items; The Solicitation Number Is W519tc25qpowd For Black Powder Class 3 And Class 6 Iaw Mil-dtl-223d. the Solicitation And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2025-003. As A Result Of The Updated Federal Acquisition Circular, A New Clause, 52.204-27 Prohibition On A Byte Dance Covered Application (jun 2023), Has Been Incorporated Into This Solicitation And Falls Under 52.212-5. the Naics Code For This Procurement Is 325920 Explosives Manufacturing. The Small Business Size Standard For This Naics Is 750. The Product Service Code Is 1376 Bulk Explosives. offerors Must Be Registered Within The System For Award Management (sam) Database At Time Of Response To This Solicitation. The Website For Sam Is Https://www.sam.gov/. addendum To 52.212-1, Instructions To Offerors – Commercial description: please See Attachment 0002 – Pricing Matrix For Clin Structure. **see Attachment 0001 – Purchase Description , 26feb2025, Attachment 0005- Rfq Questionnaire – 26feb2025, And Attachment 0008 – Mil-dtl-223d, 24feb2025. type Of Acquisition And Contract award Will Be Made Using Best Value, Resulting In A Single Award Firm Fixed Price Contract. place Of Performance performance Will Be Fob Destination At The Following: 300 Highway 361 crane In 47522 b3608 proposal Submission Requirements offerors Shall Submit The Following In Response To This Solicitation: price – Offerors Must Submit Completed Price Matrix At Attachment 0002. All Sections Shall Be Completed. Prices Shall Be Stated To 2 Decimal Places. completed Provision At Attachment 0003 – Far 52.204-24, Paragraph (d)(1) And (d)(2). completed Provision At Attachment 0004 – Far 52.212-3 Alt 1, Paragraph (b) Only. completed Responses To The Questions Provided In The Rfq Questionnaire In Attachment 0005. part One: Evaluation Factor 1 – Technical quoters Shall Submit Responses To The Responses To The Rfq Questionnaire Provided At Attachment 0005 That Correspond To This Solicitation. do Not Include Specific (individuals’) Names Of Government And/or Contractor Personnel. do Not Include Price/rates. part Two: Evaluation Factor 2 – Price quoters Shall Adhere To The Instructions On The Government Provided Price Matrix (attachment 0002) And Fully Complete All Required Fields. basis For Award the Government Will Award One (1) Award To The Offeror Whose Offer Provides The Best Value To The Government Using A Lowest Price Technically Acceptable (lpta) Approach. 1. This Order Will Be Awarded Based On Technical Acceptability And Price. 2. The Basis For Technical Acceptance Is Whether All The Requested Items Are Provided In The Quote Presented By The Offeror. The Items Presented Should Match The Technical Specifications And Not To Exceed Quantity. 3. Following, The Determination Of Technical Acceptance, The Lowest Price Of The Technically Acceptable Quotes Will Receive The Award. 4. In Accordance With Far 52.212-1(g), Quotations Are Intended To Be Evaluated And The Award Made, Without Discussions, Unless Discussions Are Determined Necessary. 5. Total Price Is Calculated As The Sum Of All Clins Added Together. 6. The Government Reserves The Right To Award Based On The Contractor’s Location. evaluation Criteria the Government Will Evaluate Quotations As Follows: factor 1: Technical: the Government Will Evaluate Factor 1, Technical, Using The Following Criteria: demonstration Of A Clear Understanding Of The Requirements And Deliverables, And On The Offeror’s Expressed Ability To Successfully Perform. The Offerors Will Be Evaluated Based On Responses To Three Criteria: Technical Expertise/ Experience, Project Team, And Technical Approach. if The Quotation Sufficiently Addresses The Rfq Questionnaire And Demonstrates A Clear Understanding And Ability To Perform The Requirement, Then The Government Will Accept Without Further Explanation That The Contractor Can Perform All Pd Requirements. The Quoter May Discuss Non-critical Requirements. However, If The Quoter Provides Statements Which Cause The Government To Question The Quoter’s Ability To Perform Those Non-critical Requirements, Such Statements Will Be Evaluated Accordingly. technical Will Be Rated Using The Following Standards In Table 1: technical Ratings description outstanding this Rating Is Only Available To Those That Have Attended The Site Visit In Addition To The Following: Quotation Indicates An Exceptional Approach And Understanding Of The Requirements And Contains Multiple Strengths. Established Team Has An Extensive Background In Explosive Contaminated Facility Remediation To Include Utilizing Remote Operated Waterjet Segmentation. Quotation Includes Detailed Previous Project Experience In The Major Contract Requirements. Quote Includes A Well Thought-out Proposed Technical Approach To Each Of The Project’s Phases. good quotation Meets Requirements And Indicates A Thorough Level Of Expertise And An Understanding Of The Requirements. Established Team Has Background In Explosive Contaminated Facility Remediation And Previous Experience In The Major Contract Requirements Including Remote Operated Waterjet Segmentation. Quote Includes A Solid Technical Approach. Strengths Outweigh Any Weaknesses. Risk Of Unsuccessful Performance Is Low. acceptable quotation Meets Requirements And Indicates An Adequate Level Of Expertise And An Understanding Of The Requirements. Established Team Has An Extensive Background In Hazardous Facility Remediation And The Major Contract Requirements Including Explosives Familiarity, Although Little To No Experience In Remote Operated Explosive Contaminated Facility Remediation Specifically. Proposed Technical Approach Is Adequately Addressed, But Not Specific. Strengths And Weaknesses Are Offsetting Or Will Have Little Or No Impact On Task Order Performance. Risk Of Unsuccessful Performance Is Moderate. marginal quotation Does Not Demonstrate An Adequate Approach And Understanding Of The Requirements. Established Team Has Very Limited Background In Explosive Facility Contamination Remediation And The Major Contract Requirements. Proposed Technical Approach Is Flawed Or Is Too Vague For Government To Determine Acceptability. Risk Of Unsuccessful Performance Is High. unacceptable quotation Does Not Meet Requirements And Contains One Or More Deficiencies. Appropriate Team Has Not Been Established, Or Established Team Does Not Have Sufficient Experience To Complete The Project Tasks Without Significant Government Oversight. Risk Of Unsuccessful Performance Is High. If This Criterion Is Rated As Unacceptable, Additional Factors Will Not Be Evaluated And The Quotation Is Not Eligible For Award. definitions strength strength Is Defined As A Particular Aspect Of The Quoter’s Submission That Has Merit Or Exceeds Specified Performance Capability Requirements In A Way That Will Be Advantageous To The Government During Task Order Performance. weakness weakness Is Defined As Any Flaw In The Quotation That Increases The Risk Of Unsuccessful Task Order Performance. Deficiency Is Defined As Any Material Failure Of A Quotation To Meet A Government Requirement Or A Combination Of Weaknesses In A Quotation That Increases The Risk Of Unsuccessful Task Order Performance To An Unacceptable Level. factor 2: price the Government Will Evaluate Factor 2 – Price, For The Following: compliance: Quotations Will Be Evaluated For Compliance Based Upon The Submission Requirements Contained In The Solicitation. price Reasonableness: The Quoter’s Price Quotation Will Be Evaluated To Determine Reasonableness. In Accordance With Far 31.201-3, A Price Is Reasonable If, In Its Nature And Amount, Does Not Exceed That Which Would Be Incurred By A Prudent Person In Conduct Of Competitive Business. total Price Is Calculated As The Sum Of All Clins Added Together listing Of Attachments attachment 0001 - Pd 26feb2025 attachment 0002 - Pricing Matrix attachment 0003 - Far 52.204-24 Provision attachment 0004 - Far 52.212-3 Alt 1 Provision attachment 0005 - Rfq Questionnaire attachment 0006 - Provisions And Clauses attachment 0007 – Certified Test Result For Procurement attachment 0008 – Mil-dtl-223d Black Powder deadline For Submission offers Are Due On 08 April 2025 No Later Than 12:30 Pm Central Time. offers Shall Be Submitted In The Following Way: electronically Via Email To The Contract Specialist, Dustin Sexton, Dustin.p.sexton.civ@army.mil And Contracting Officer, Bryce Willett, Bryce.t.willett.civ@army.mil. Offerors Shall Include “w519tc25qpowd Response – [insertofferor’s Name]” Within The Subject Line. questions questions Shall Be Submitted In The Same Manner As Offers, Electronically Via Email To The Contract Specialist And Contracting Officer Listed Above. **note: Interested Offerors Must Submit Any Questions Concerning This Solicitation No Later Than 20 March 2025, To Enable The Buyer To Respond. Questions Not Received Prior To 20 March 2025 Will Not Be Considered. If Needed, A Final Amendment Will Be Submitted By 27 March 2025. end Of Addendum 52.212-1

Details: N00164-25-q-0554 – Evaluation And Repair Of Klystron Tubes – Psc J066 – Naics 811210 issue Date 05 Mar 2025 – Closing Date 12 Mar 2025 – 4:00 Pm Eastern Time naval Surface Warfare Center (nswc Crane) Has A Requirement For: clin 0001-0005: Qty- 5 - Klystron Va-889f Microwave Tube (mwt) Evaluations clin 0006: Repairs sole Source Procurement- The Proposed Contract Action Is For The Supplies Or Services For Which The Government Intends To Solicit And Negotiate With One Source, Limited Sources Or Brand Name Only Microwave Power Products, Inc. 811 Hansen Way Palo Alto, Ca 94304, Under The Authority Of Far 13.106-1. This Is Being Solicited On A Sole Source/brand Name Only Basis Because Items Peculiar To One Manufacter. All Responsible Sources May Submit A Capability Statement, Which Shall Be Considered By The Agency. However, A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Solicitation Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. contractors Must Be Properly Registered In The System For Award Management (sam). Offerors May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 866-606-8220 Or Via The Internet At Https://sam.gov. this Solicitation Is Being Issued Pursuant To The Procedures At Far Part 13 As A Written. Synopsis Exception Far 5.202(a)(13) Applies And Solicitation Number N00164-25-q-0554 Is Hereby Issued As An Attachment Hereto. all Changes To The Requirement That Occur Prior To The Closing Date Will Be Posted To Contract Opportunities On Https://sam.gov/.it Is The Responsibility Of Interested Vendors To Monitor Https://sam.gov/ For Any Amendments, Which May Be Issued To This Solicitation. for Changes Made After The Closing Date, Only Those Offerors That Provide A Quote Will Be Provided Any Changes/amendments And Considered For Future Discussions And/or Award. offers Shall Be E-mailed To Trista.m.ray.civ@us.navy.mil.all Required Information Must Be Received On Or Before 12 Mar 2025 4:00pm Eastern Time.

Details: The old workshop at the southern heating plant, built in the 1970s, is the last remaining building on the old power plant site. In 2024, the building was gutted in order to carry out a comprehensive energy renovation of the building shell and the building technology. In the course of the renovation, various areas of use will be created: a rented area on the ground floor, a district heating water treatment plant and a workshop in the large crane hall. An office and administration area will be set up on the upper floor. The heating technology will be implemented in bivalent operation with district heating. The hot water supply is decentralized and the heat pump works with a bivalence point of -4 °c. During summer operation, the heat pump is used exclusively for cooling the building. For this purpose, a line with 7°c/13°c is provided for the ventilation system, while on the upper floor air conditioning units with 18°c/23°c above the dew point are used for cooling. The main technical measures include: Installation of TLT devices Integration of outlets for water treatment Electrical installations in the office area on the ground floor Air conditioning systems for the workshop, office areas (ground floor and first floor), kitchen, meeting rooms, toilets and server room Laying of ducts and pipes as well as the installation of fire dampers

Description: Purchase of a truck with loading crane and three-way tipping bridge in a single-invoice transaction

Description: Marine Corps Logistics Command (margorlogom) Contracts Department In Albany, Ga Is Issuing This Sources Sought Synopsis As A Means Of Conducting Market Research To Identify Parties Having An Interest In And The Resources To Support This Requirement For Schroeder Industries’ Hydraulic Test Bench. (htb-150-b- Acdeghkl). The Result Of This Market Research Will Contribute To Determining The Method Of Procurement. The Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 334514- Totalizing Fluid Meter And Counting Device Manufacturing. hydraulic Test Bench. (htb-150-b- Acdeghkl) powered By (1) 100 Hp And (i) 50 Hp, 460v I 60hz I 3 Phase Electric Motors. designed To Test Hydraulic Motors, Pumps, Valves And Cylinders this Motor Will Require Electric Motor Starter With A 115 Vac Control Circuit main Bench Pump Is Capable Of 38 Gpm At 5000 Psi, Auxiliary Main Pump Capable Of 23 Gpm At 5000 Psi; Supplemental Pump Capable Up To 30 Gpm At 5000 Psi 1” And 2” Suction Qd Ports 100-gallon Hydraulic Reservoir bench Equipped With Full Flow 3-micron Filtration, 30” X 30” Work Pan, Oil Level Sight Gauge, Fill Cap With Mesh Strainer, Digital Tachometer, Test Pump Mounting Bracket, Driveline, Insert Chuck, Straight Shaft Insert Group And Universal Mounting Plate. the Following Accessories Will Be Installed On This Bench: oil Cooler Group- Water Cooled Heat Exchanger jib Crane Group supplemental Filtration( Standard On All Htb Units) clamshell Sliding Safety Enclosure bi-directional Closed Loop Pump Test Circuit hmg4000 Digital Sensor Recorder And Display digital Gauges cs100 Confirmation Monitoring schroeder Hose Kit a-tb-2172, Kit, Adapter, Splined Bore there Is No Solicitation At This Time. This Request For Capability Information Does Not Constitute A Request For Quotes; Submission Of Any Information In Response To This Market Survey Is Purely Voluntary; The Government Assumes No Financial Responsibility For Any Costs Incurred. if Your Organization Has The Potential Capacity To Perform These Contract Services, Please Provide The Following Information: 1) Organization Name, Address, Email Address, Web-site Address, Telephone Number, And Size And Type Of Ownership For The Organization 2) Tailored Capability Statements Addressing The Particulars Of This Effort With Appropriate Supporting Documentation. [note: In Accordance With Far 10.001(b), Agencies Should Not Request Potential Sources To Submit More Than The Minimum Information Necessary.] based On The Responses To This Sources Sought Notice/market Research, This Requirement May Be Set-aside For Small Businesses Or Procured Through Full And Open Competition, And Multiple Awards May Be Made. Telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions.

Description: The Department Of Veteran Affairs, Networking Contracting Office (nco1) Located In Brockton, Ma Intends To Enter Into A Sole Source Procurement, Pursuant To The Authority Of Far 6.302-1, With Trane U.s. Inc. For The Following Requirement: statement Of Work (sow) background: this Work Covers All Labor, Transport, And Materials To Complete A Chiller Replacement For Building 2 Located At Brockton Vamc. period Of Performance: 940 Belmont Street, Brockton, Ma statement Of Work: provide A Replacement Of A Trane Acs Air-cooled Chiller. scope Of Work: turnkey Installation Of Hvac Equipment replacement Of Building 2 Rtac Chiller To Upgrade Infrastructure And Address The Failing Load Capacity. coordination Between The Contractor And Va To Recover The Refrigerant Correctly And Prepare The Chiller For Removal From The Site. remove And Install New Trane Acs Air-cooled Chiller. start The New System Up Appropriately On Schedule. trane Factory Startup Included. mechanical Installation disconnect And Reconnect Piping Connections. remove And Replace Isolation Valves. safe Handling Of Refrigerant Per Epa Regulations. any Damaged Or Removed Insulation With Be Replaced With New. electrical Installation powering Off All Equipment From Existing Electrical Panels. disconnect All Power And Control Wiring To The Existing Chiller reconnect All Power And Control Wiring To The New Chiller proposal Notes/ Clarifications scope Of Work Has Been Configured To Be Executed During Normal-business Hours. equipment Order Release And Services Rendered Are Dependent On Receipt Of Po/subcontract the Contractor Will Not Perform Any Work If Working Conditions Could Endanger Or Put At Risk The Safety Of Our Employees Or Subcontractors the Customer Shall Perform Asbestos Or Hazardous Material Abatement Removal excludes Roof Repairs. access For Crane And Parking For The Turnkey Team To Be Provided By The Va. trane U.s. Inc. Will Be Awarded This Procurement Because The Chiller Is Manufactured By Trane And Only Trane Authorized Technicians Are Allowed To Work On The Equipment In Order To Maintain Oem Warranty. Building Management Controls Have Already Been Configured To Accept A Trane Manufactured Unit, Replacement Of Unit By Manufacturer (trane) Is Recommended Method In Order To Avoid Additional Costs For Reconfiguration Of Controllers To Existing Bms System. Other Contractors Are Unable To Perform This Work Due To Not Having Access To Trane Software And Replacement Supplies/oem Parts. Due To The Proprietary Nature Of The Work Requiring A Manufacturer And Installer Having Qualified Experience For Having Access To Trane Parts And Codes/software, These Proprietary Issues Would Not Allow For Full And Open Competition. the Naics Code For This Requirement Is 811310 With Small Business Size Standard Of $12.5 Million. this Notice Of Intent Is Not A Solicitation Nor Is It A Request For Proposal. However, Interested Parties That Believe They Can Satisfy The Requirement Listed Above Must Clearly Identify Their Capability To Do So In Writing By March 10, 2025 At 9 Am Est Time. Responses Should Be Sent To Issa Shawki At Issa.shawki@va.gov. Information Submitted In Response To This Notice Will Be Used Solely To Determine Whether Competitive Procedures Could Be Used For This Acquisition. A Determination By The Government Not To Open The Requirement To Competition Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government.