Computer Tenders

Details: Description Invitation To Bid For The Procurement Of Foreign Books For Nlp 1.the National Library Of The Philippines (nlp), Through The Authorized Appropriation For Fy 2025 National Expenditure Program (nep) Intends To Apply The Sum Of One Million Four Hundred Sixty Six Thousand Pesos (php1,466,000.00) Being The Approved Budget Contract (abc) To Payments Under The Contract For Pb24-31 Procurement Of Foreign Books For Nlp (early Procurement Activity (epa) For 2025 . Bidding Will Be Through Line Item Bidding. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Line Item Project Description Abc Cost Of Bidding Docs Bid Opening Venue Procurement Of Foreign Books For Nlp Php1,466,000.00 Php5,000.00 December 12, 2024 ; 1:31 Pm 6th Floor Function Room Nlp Bldg, T.m. Kalaw St. Ermita, Manila 2.the Nlp Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within 60 Working Days Upon Receipt Of Purchase Order. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3.bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non- Discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorship, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4.prospective Bidders May Obtain Further Information From The Bac Secretariat And Inspect The Bidding Documents Posted At The Philippine Government Electronic Procurement System (philgeps) And In Our Official Website At Http://web.nlp.gov.ph/. 5.a Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 21, 2024 From The Given Address And Website Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php5000.00) . The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through Email. 6.the Nlp Will Hold An Online Pre-bid Conference On November 29, 2024 At 1:30 Pm Through Videoconferencing Which Shall Be Open To All Prospective Bidders. Sending An Email To Bac@nlp.gov.ph With The Subject: Request To Join The Pre-bid Conference For Public Bidding No. 24-31. 7.bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Provided Below On Or Before 1:30 Pm Of December 12, 2024. Usb Flash Drive Containing The Soft Copy Of The Technical (in Pdf) And Financial (in Word Or Excel) Requirements Must Be Included In The Original Copy Of The Technical Documents. Late Bids Shall Not Be Accepted. 8.all Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9.bid Opening Shall Be On December 12, 2024, 1:31 Pm At The 6th Floor Function Room, Nlp Building. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10.the Nlp Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11.for Further Information, Please Refer To: Maureen C. Terrenal Marie Joy H. Bestoir Eleanor C. Siyang Jonathan Santos Bac Secretariat National Library Of The Philippines Tel. No.: (02) 5314-2100 Loc. 114 / 406 / 412 Email: Bac@nlp.gov.ph Website: Http://web.nlp.gov.ph/ 12.you May Visit The Following Websites: For Downloading Of Bidding Document: Http://web.nlp.gov.ph/nlp/?q=bidsv2 Https://notices.philgeps.gov.ph/ (sgd.) Maricel M. Ureña Bac Chairperson Procurement Of Foreign Books For Nlp 265t/265v Specification: Vol. Procrastination: What It Is, Why It's A Problem, And What You Can Do About It (apa Lifetools Series) Paperback By Fuschia M. Sirois Phd C2022 Apa Lifetools; 1st Edition Isbn 978-1433838064 1 1,850.000 1,850.00 Vol. 21 Visual Thinking Tools For The Classroom \1ed.. By Harbord, Meredith J., 9781032626222, 2025 1 3,378.000 3,378.00 Vol. A Little Guide For Teachers: Student Mental Health By Gandhi, 9781529672404, 2024 1 1,600.000 1,600.00 Vol. A Little Life. By Hanya Yanagihara, 9780804172707, C2021 (reprint) 1 1,400.000 1,400.00 Vol. A Promised Land. By Barack Obama,9781524763169, C2020 1 1,900.000 1,900.00 Vol. A World Without Email: Reimagining Work In An Age Of Communication Overload. By Cal Newport, 9780525536550, C2021 1 1,300.000 1,300.00 Vol. Academic Writing And Grammar For Students 3e. By Osmond, 9781529628210, 2024 1 2,830.000 2,830.00 Vol. Acting : The Basics By Bella Merlin, 3rd Edition, 9781032212074, 2023 1 3,050.000 3,050.00 Vol. Advanced And Struggling Students: An Insider’s Guide For Parents And Teachers To Support Excepti.... Parry Graham, 9781475867183, 2023 1 2,175.000 2,175.00 Vol. Advanced Linear Algebra \2ed.. Loehr, Nichalas A., 9781032765723, 2024 1 10,056.000 10,056.00 Vol. Ai And The Future Of Education - Teaching In The Age Of Artificial Intelligence. Shah, 9781394219247, 2023 1 3,070.000 3,070.00 Vol. Architectural Tools And Equipments.3g E-learning, 9781984678935, 2023 1 6,050.000 6,050.00 Vol. Art Of Intercultural Business Communication, The \1ed. By Du-babcock, Betha, 9780367478513, 2025 1 4,470.000 4,470.00 Vol. Artificial Intelligence : Legal Issues, Policy And Practical Strategies / 2024, 9781639054930 1 12,230.000 12,230.00 Vol. Artificial Intelligence In Architecture. Delcampo, Matias, 9781394191215, 2024 1 3,400.000 3,400.00 Vol. Artist's Step-by-step Guide To Drawing/ Coleman, Vivienne/ Pb/ By Arcturus/ 9781398803848, 2024 1 2,700.000 2,700.00 Vol. Atlas Of The Heart: Mapping Meaningful Connection And The Language Of Human Experience. By Brené Brown,9780399592553, C2021 1 1,600.000 1,600.00 Vol. Autism And Inclusive Education \1ed.. By Lebenhagen, Chandra, 9781032598819, 2025 1 3,499.000 3,499.00 Vol. Basic Knowledge Of Hotel Management. 3g E-learning, 9781984685469, 2024 1 5,790.000 5,790.00 Vol. Basic Statistics For Business And Economics \11ed.. By Lind, Douglas A., 9781266914768, 2024 1 5,116.000 5,116.00 Vol. Basics Of Computer Graphics.3g E-learning, 9781984685797, 2024 1 4,750.000 4,750.00 Vol. Beautiful World, Where Are You. By Sally Rooney,9780374602604, C2021 1 1,400.000 1,400.00 Vol. Bewilderment. By Richard Powers,9780393881141, C2021 1 1,400.000 1,400.00 Vol. Big Book Of Tasks For English Language Development, The. Akhavan, Nancy, 9781071904121, 2024 1 4,154.000 4,154.00 Vol. Big Data Management And Analytics . Gupta Brij B, 9789811257117, 2024 1 8,440.000 8,440.00 Vol. Biology \15ed.. Mader, Sylvia S., 9781266940026, 2025 1 5,618.000 5,618.00 Vol. Braiding Sweetgrass: Indigenous Wisdom, Scientific Knowledge, And The Teachings Of Plants. By Robin Wall Kimmerer,9781571313560, C2020 1 1,250.000 1,250.00 Vol. Breath: The New Science Of A Lost Art. By James Nestor,9780735213616, C2020 1 1,300.000 1,300.00 Vol. Buildings For People - Responsible Real Estate Development And Planning. Hollander, Justin, 9781119846574, 2023 1 6,620.000 6,620.00 Vol. Bullying Beyond The Schoolyard: Preventing And Responding To Cyberbullying 3e. Hinduja, 9781071916568, 2023 1 4,330.000 4,330.00 Vol. Burns' Pediatric Primary Care \8ed.. Lee Garzon, Dawn, 9780323882316, 2025 1 15,172.000 15,172.00 Vol. Business Analytics/ Camm, Jeffrey , Cengage, 9780357902202, 2023 1 11,938.000 11,938.00 Vol. Business Driven Information Systems \19ed.. Baltzan, Paige, 9781266869013, 2025 1 5,116.000 5,116.00 Vol. Caste: The Origins Of Our Discontents. By Isabel Wilkerson,9780593230251, C2020 1 1,600.000 1,600.00 Vol. Chemistry \15ed.. Chang, Raymond, 9781266817441, 2025 1 5,618.000 5,618.00 Vol. Chess For Beginners / Michael Basman / 45pp / Hb / Dorling Kindersley / 2024 /, 9780241658901, 2024 1 1,850.000 1,850.00 Vol. Child Protection Handbook , The \4ed.. Clawson, Rachael, 9780702079771, 2025 1 4,804.000 4,804.00 Vol. Christian Imaginations Of The Religious Other. Moyaert, Marianne, 9781119545507, 2024 1 4,144.000 4,144.00 Vol. Clinical Nursing Skills & Techniques \11ed.. Perry, Anne G., 9780443113307, 2025 1 3,940.000 3,940.00 Vol. Clinical Reasoning Cases In Nursing 8e. Harding, 9780323831734, 2024 1 7,060.000 7,060.00 Vol. Cloud Cuckoo Land. By Anthony Doerr,9781982168438, C2021 1 1,600.000 1,600.00 Vol. Coaching Students In Higher Education \1ed.. Lim, May Sok Mui, 9781032364698, 2025 1 3,985.000 3,985.00 Vol. Collaborating For Transformative Change In Education \1ed.. Lampert-shepel, Elina, 9781032613574, 2025 1 4,835.000 4,835.00 Vol. Conducting Applied Psych Research 1e. Wilson, 9780335250097, 2024 1 7,000.000 7,000.00 Vol. Conducting Contextual Research \1ed.. Guerin, Bernard, 9781032608181, 2024 1 5,442.000 5,442.00 Vol. Construction Project Manager's Pocket Book \3ed.. Cartlidge, Duncan, 9781032761350, 2025 1 3,256.000 3,256.00 Vol. Consultation Skills \1ed.. Lavallee, 9780335251506, 2024 1 5,996.000 5,996.00 Vol. Contemporary Urban Planning \12ed.. Levy, John M., 9781032270531, 2025 1 9,449.000 9,449.00 Vol. Cool Tech Set 2 By World Book 2024 9780716653875 1 20,000.000 20,000.00 Vol. Cool Tech Set 3 By World Book 2024 9780716654797 1 20,000.000 20,000.00 Vol. Core Concepts In Chemistry: Organic Chemistry (2nd Edition (with Access Code. Perucha, 9781984689221, 2024 1 6,050.000 6,050.00 Vol. Coronavirus Disease 2019 (covid-19: A Clinical Guide. Gholamrezanezha, Ali, 9781119789680, 2023 1 14,220.000 14,220.00 Vol. Counselling Skills And Studies 3e Updated Edition. By Dykes, Sage Publications Ltd 9781529671049, 2024 1 3,920.000 3,920.00 Vol. Countries Of The World / Pb / Dorling Kindersley / 9780241658925 , 2024 1 1,000.000 1,000.00 Vol. Creek's Occupational Therapy And Mental Health: 6ed. By Bryant, Wendy, 9780702077456, 2023 1 7,560.000 7,560.00 Vol. Criminal Psychology In Action \1ed.. Canter, David, 9781032773278, 2025 1 3,742.000 3,742.00 Vol. Critical Participatory Inquiry: An Interdisciplinary Guide. By Call-cummings, 9781071825860, 2023 1 10,470.000 10,470.00 Vol. Critical Thinking . Tom Chatfield, 9781529718522, 2022 1 2,450.000 2,450.00 Vol. Crying In H Mart: A Memoir. By Michelle Zauner,9780525657743, C2021 1 1,400.000 1,400.00 Vol. Cultivating Curiosity: Teaching And Learniong Reimagined. Nelson, 9781119824169, 2021 1 3,910.000 3,910.00 Vol. Current Issues: Artificial Intelligence. By Salvaleda, 9781984689535, 2024 1 6,600.000 6,600.00 Vol. Dare To Lead: Brave Work. Tough Conversations. Whole Hearts. By Brené Brown ,9780399592522 1 1,250.000 1,250.00 Vol. Disaster Readiness And Risk Reduction (4th Edition (with Access Code.3g E-learning, 9781984680464, 2023 1 6,050.000 6,050.00 Vol. Disciplined Entrepreneurship Expanded And Updated: 24 Steps To A Successful Startup. Aulet, 9781394222513, 2024 1 2,970.000 2,970.00 Vol. Doing Digital Methods 2e. By Rogers, Sage Publications Ltd; 9781529764321, 2024 1 5,420.000 5,420.00 Vol. Drinking Water Treatment Vol 2: Chemical And Physical Elimination Of Organic Substances And Particles. By Gaid, 9781786307842, 2023 1 18,020.000 18,020.00 Vol. Dynamics Of Flexible Aircraft. By Palacios, 9781108420600, 2023 1 15,700.000 15,700.00 Vol. Early Childhood Studies: A Student's Guide 2e. By Fitzgerald, 9781529794892, 2024 1 4,060.000 4,060.00 Vol. Effective Management Of Nonprofit Organizations \1ed. By Newman, Melissa, 9781032460871, 2024 1 4,470.000 4,470.00 Vol. Eliminate Negative Thinking: How To Overcome Negativity, Control Your Thoughts, And Stop Overthinking. Shift Your Focus Into Positive Thinking, Self-acceptance, And Radical Self Love Paperback By Derick Howell. Inner Growth Media, C2020. Isbn‎ 978-1647800840 1 3,025.00 3,025.00 Vol. Engineering For Curious Kids/ By Oxlade, Chris/ Hb/ Arcturus/ 9781398811256, 2024 1 3,000.00 3,000.00 Vol. Entangled Life: How Fungi Make Our Worlds, Change Our Minds & Shape Our Futures. By Merlin Sheldrake,9780525510321, C2020 1 1,700.000 1,700.00 Vol. Equipment And Components In The Oil & Gas Industry Vol. 1. Sotoodeh, Karan, 9781032739076, 2024 1 10,663.000 10,663.00 Vol. Essential Skills For Physiotherapists. David, Clancy, 9780443111280, 2024 1 3,748.000 3,748.00 Vol. Essentials Of Athletic Injury Management 12e Ise. Prentice, 9781265236748, 2023 1 7,120.000 7,120.00 Vol. Essentials Of Investments 13e Ise . Bodie, 9781266885389, 2025 1 6,880.000 6,880.00 Vol. Ethical Applied Behavior Analysis Models For Individuals Imp. Peterson, Stephanie, 9780367465919, 2024 1 4,835.000 4,835.00 Vol. Ethical Education: Towards An Ecology Of Human Development. Scherto Gill, 9781108708654, 2024 1 3,700.000 3,700.00 Vol. Explainable Ai (xai For Sustainble Development. Lakshmi, D., 9781032598864, 2024 1 15,886.000 15,886.00 Vol. Explaining Primary Science 3e. Chambers, 9781529618686, 2024 1 4,600.000 4,600.00 Vol. Financial Accounting And Reporting For Non-accounting Students: How To Interpret Financial State.... Frost, 9781398614086, 2024 1 4,310.000 4,310.00 Vol. Financial Statement Analysis: A Data Analytics Approach \1ed. Resutek, Robert, 9781266133077, 2025 1 5,116.000 5,116.00 Vol. Foundations Of Sport And Exercise Psychology Paperback. Weinberg, 9781718207592, 2023 1 17,760.000 17,760.00 Vol. Four Thousand Weeks: Time Management For Mortals. By Oliver Burkeman,9780374159122, C2021 1 1,300.000 1,300.00 Vol. Front Office Management. Cajiao, 9781774697191, 2024 1 5,680.000 5,680.00 Vol. Future Of Governance, The \1ed.. Brownsword, Roger, 9781032831060, 2025 1 4,658.000 4,658.00 Vol. General, Organic & Biological Chemistry \6ed.. Smith, Janice Gorzynski, 9781266838613, 2025 1 5,618.000 5,618.00 Vol. Generative Ai & Chatgpt For Beginners Made Easy 2-books-in-1: Master Artificial Intelligence Fundamentals, Elevate Your Skills, And Unlock Money-making Strategies With Conversational Ai /2024, 9798325168819 1 2,053.000 2,053.00 Vol. Getting Started In Alternative Investments. Dearth, 9781119860280, 2023 1 2,130.000 2,130.00 Vol. Global Audit Leadership \1ed.. Bell, Audley L., 9781032075372, 2025 1 5,563.000 5,563.00 Vol. Greenlights. By Matthew Mcconaughey,9780593139134, C2020 1 1,500.000 1,500.00 Vol. Grit: The Power Of Passion And Perseverance. By Angela Duckworth,9781501111112, C2016 1 1,250.000 1,250.00 Vol. Guinness World Records C2025 1 2,549.000 2,549.00 Vol. Hamnet. By Maggie O'farrell,9780525657606, C2020 1 1,400.000 1,400.00 Vol. Handbook Of Emotion Regulation \3ed.. Gross, James J., 9781462549412, 2024 1 6,340.000 6,340.00 Vol. Handbook Of The Science Of Early Literacy \1ed.. Cabell, Sonia Q., 9781462555024, 2024 1 4,934.500 4,934.50 Vol. Health Psychology: Theory, Research And Practice 7e. Marks, 9781529609899, 2024 1 6,334.500 6,334.50 Vol. Higher Education Research Methodology \2ed.. Daniel, Ben Kei, 9781032753294, 2025 1 3,499.000 3,499.00 Vol. Housekeeping Management. Juyal, 9781774697207, 2024 1 6,551.000 6,551.00 Vol. How Beautiful We Were. By Imbolo Mbue,9780593132425, C2021 1 1,400.000 1,400.00 Vol. How To Avoid A Climate Disaster: The Solutions We Have And The Breakthroughs We Need. By: Bill Gates,9780385546133, C2021 1 1,500.000 1,500.00 Vol. How To Be A Successful Nursing Student: New Notes On Nursing 1ed. Elliott & Chinn, 9780323881791, 2024 1 4,550.000 4,550.00 Vol. How To Sell Anything Online. Sarkar, Anaita, 9781394270811, 2024 1 2,124.000 2,124.00 Vol. If Your Adolescent Has Depression: An Essential Resrouce For Parents. Dwight L. Evans, 9780197636077, 2023 1 1,650.000 1,650.00 Vol. Illustrated Dictionary Of Architecture (2nd Edition. Cingolani, 9781984688361, 2024 1 3,820.000 3,820.00 Vol. Industry 4.0 Interoperability, Analytics, Security, And Case Studies 1e. Edited By G. Rajesh, 9780367501129, 2021 1 21,660.000 21,660.00 Vol. Influencers And Creators: Business, Culture And Practice. Kozinets, 9781529768640, 2023 1 5,190.000 5,190.00 Vol. Inorganic Chemistry: Principles And Properties . Nath, 9789811281761, 2024 1 11,280.000 11,280.00 Vol. Intelligence Analysis: A Target-centric Approach 6e. Clark, 9781544369143, 2020 1 10,430.000 10,430.00 Vol. Interior Design Visual Presentation \6ed.. Mitton, Maureen, 9781394173563, 2024 1 5,112.000 5,112.00 Vol. International Organizations In World Politics 2e. Gutner, 9781544374666, 2024 1 10,470.000 10,470.00 Vol. Introducing Human Geographies \4ed.. Dombroski, Kelly, 9780367211769, 2024 1 6,171.000 6,171.00 Vol. Introduction To Chemistry \6ed.. Bauer, Rich, 9781266878275, 2025 1 5,618.000 5,618.00 Vol. Introduction To Clinical Pharmacology: 11ed. Visovsky, Constance, 9780443113369, 2025 1 11,530.000 11,530.00 Vol. Introduction To Deaf Culture 2e. Holcomb, 9780197503232, 2023 1 7,220.000 7,220.00 Vol. Introduction To Education Studies 6e. Barlettt, 9781529621631, 2024 1 3,920.000 3,920.00 Vol. Introduction To Energy Systems. Dincer, 9781119825760, 2023 1 8,130.000 8,130.00 Vol. Introduction To Physical Education Exercise & Sport \12ed.. Lumpkin,, 9781266914959, 2025 1 5,618.000 5,618.00 Vol. Introduction To Policing 4e. Rowe, 9781529605143, 2024 1 4,740.000 4,740.00 Vol. Introduction To Preaching: Scripture, Theology, And Sermon Preparation. Schade, 9781538138601, 2023 1 4,900.000 4,900.00 Vol. Introduction To Python \1ed.. Baez-lopez, David, 9781032119106, 2024 1 7,308.000 7,308.00 Vol. Introduction To Radiologic Technology \9ed.. Callaway, William J., 9780443117268, 2025 1 11,980.000 11,980.00 Vol. Introduction To Records Management . Manoj Dwivedi, 9781774694909, 2023 1 9,710.000 9,710.00 Vol. Introduction To Visual Effects: A Computational Approach. Madeira, 9781032072302, 2023 1 10,750.000 10,750.00 Vol. Introductory Financial Accounting For Business. Edmonds,, 9781266207839, 2025 1 11,980.000 11,980.00 Vol. Java: A Beginner's Guide \10ed.. Schildt, Herbert, 9781265054632, 2024 1 2,460.000 2,460.00 Vol. Kirk's Basic Surgical Techniques 8e. Myint, Fiona, 9780443113673, 2025 1 6,560.000 6,560.00 Vol. Klara And The Sun. By Kazuo Ishiguro,9780571364886, C2021 1 1,350.000 1,350.00 Vol. Language Disorders From Infancy Through Adolescence: Listening, Speaking, Reading, Writing, And .... Rhea Paul, 9780323830157, 2025 1 18,070.000 18,070.00 Vol. Law Of Public Communication, The \13ed.. Lee, William E., 9781032676388, 2025 1 11,802.000 11,802.00 Vol. Learning About Immigration Law 4e. Scaros, 9780357767542, 2024 1 11,600.000 11,600.00 Vol. Learning And Development: A Practical Introduction 3e. Page-tickell, 9781398605800, 2022 1 2,288.000 2,288.00 Vol. Lenses On Reading An Introduction To Theories & Models \4ed.. Tracey, Diane H., 9781462554669, 2024 1 4,420.000 4,420.00 Vol. Management: A Practical Introduction \11ed.. Kinicki, Angelo, 9781266910159, 2025 1 5,116.000 5,116.00 Vol. Matrix. By Lauren Groff,9781594634499, C2021 1 1,400.000 1,400.00 Vol. Merriam-webster's Dictionary And Thesaurus Newest Edition Merriam-webster C2024 1 1,560.000 1,560.00 Vol. Minimalism: A 12-week Guide To Decluttering Life For Peace, Clarity And Purpose Paperback By Dean Christopher. Independently Published, C2023 Isbn ‎ 979-8864293287 1 3,025.00 3,025.00 Vol. Modern Data Analytics In Excel: Using Power Query, Power Pivot, And More For Enhanced Data Analysis. Mount, 9781098148829, 2024 1 6,920.000 6,920.00 Vol. National Geographic Kids Almanac 2025 1 1,200.000 1,200.00 Vol. Natural Flava: Quick & Easy Plant-based Caribbean Recipes. Mcanuff, 9781526631879, 2022 1 3,410.000 3,410.00 Vol. Neuroscience/ 7th Edition. Sinauer Associates Is An Imprint Of Oxford University Press, 9780197616246, 2023 1 14,750.000 14,750.00 Vol. New Dinosaur Encyclopedia/ Martin, Claudia/ Hb/ Arcturus/ 2024/ 9781398823167. , 9781398823167, 2024 1 3,800.000 3,800.00 Vol. Nietzsche's Political Economy 1e . Safronov, 9783110752298, 2023 1 16,470.000 16,470.00 Vol. No Filter: The Inside Story Of Instagram. By Sarah Frier,9781982126803, C2020 1 1,300.000 1,300.00 Vol. Noise: A Flaw In Human Judgment. By Daniel Kahneman, Olivier Sibony, Cass R. Sunstein,9780316451406, C2021 1 1,800.000 1,800.00 Vol. Nonprofit Management All-in-one For Dummies. Browning, 9781394172436, 2023 1 5,530.000 5,530.00 Vol. On Tyranny: Twenty Lessons From The Twentieth Century (graphic Edition. By Timothy Snyder, Illustrated By Nora Krug,9781984859150, C2021 1 1,500.000 1,500.00 Vol. Operational Excellence In Your Organization \1ed.. Wilkinson, Fraser, 9781032774237, 2024 1 4,228.000 4,228.00 Vol. Organic Chemistry. Hanif, 9781774697757, 2024 1 5,680.000 5,680.00 Vol. People Skills For Behavior Analysts \1ed.. Hall, Carmen, 9781032292236, 2024 1 4,956.000 4,956.00 Vol. Percy Jackson And The Olympians 5 Book Paperback Boxed Set 1 2,500.000 2,500.00 Vol. Philosophical Foundations Of Mixed Methods Research \1ed.. Shan, Yafeng, 9781032226118, 2024 1 4,956.000 4,956.00 Vol. Philosophies, Puzzles And Paradoxes \1ed.. Pawitan, Yudi, 9781032377391, 2024 1 2,892.000 2,892.00 Vol. Physics \1ed.. Walker, James S., 9781292472430, 2025 1 5,380.000 5,380.00 Vol. Planning For The Common Good. Lennon, 9780367726034, 2022 1 5,980.000 5,980.00 Vol. Planning Primary English: How To Design And Teach Brilliant Lessons. Hewett, 9781529620559, 2024 1 3,510.000 3,510.00 Vol. Practical Digital Marketing And Ai Psychology \1ed.. Gabay, Jonathan, 9781032530284, 2025 1 3,985.000 3,985.00 Vol. Practical Ethics In Suicide. Mishara, 9781009414906, 2024 1 6,100.000 6,100.00 Vol. Practical Machine Learning With R \1ed.. Lange, Carsten, 9781032434056, 2024 1 9,449.000 9,449.00 Vol. Principles Of Auditing & Other Assurance Services \23ed.. Whittington, Ray O., 9781266857669, 2024 1 6,172.000 6,172.00 Vol. Priorities In Critical Care Nursing 9th Edition. Linda D. Urden, 9780323809900, 2023 1 14,060.000 14,060.00 Vol. Professional Selling \2ed.. Hunt,, 9781266937736, 2025 1 5,618.000 5,618.00 Vol. Qualitative Research Writing: Credible And Trustworthy Writing From Beginning To End. Salmona, 9781071818107, 2024 1 4,740.000 4,740.00 Vol. Real Estate Finance & Investments 18e Ise. Brueggeman, 9781266928086, 2025 1 7,560.000 7,560.00 Vol. Real Talk About Classroom Management: 57 Best Practices That Work And Show You Believe In Your S.... Pariser, 9781071922552, 2024 1 3,650.000 3,650.00 Vol. Reasons For Logic, Logic For Reasons \1ed.. Hlobil, Ulf, 9781032360768, 2025 1 11,270.000 11,270.00 Vol. Reforesting The Earth: The Human Drivers Of Forest Conservation, Restoration, And Expansion . Rudel, 9780231210690, 2023 1 4,080.000 4,080.00 Vol. Reinforced Concrete Design \1ed.. Bhanja, Santanu, 9781032458892, 2024 1 17,817.000 17,817.00 Vol. Religion In The Classroom: Exploring The Issues. Golden, 9781440872761, 2023 1 6,240.000 6,240.00 Vol. Research Handbook Of Complex Project Organizing. Winch, Graham M., 9781035337354, 2023 1 6,182.000 6,182.00 Vol. Research Methods And Statistics In Psychology 4e. Haslam, 9781529793666, 2024 1 6,510.000 6,510.00 Vol. Research Methods For Sport Management \2ed.. Skinner, James, 9781032501956, 2025 1 6,413.000 6,413.00 Vol. Rethinking Disability And Mathematics \1ed.. Lambert, Rachel, 9781071926031, 2024 1 4,154.000 4,154.00 Vol. Ripley's Believe It Or Not! C2025 1 2,450.000 2,450.00 Vol. Rural Arts Management \1ed.. Kieffer, Elise Lael, 9781032431437, 2025 1 6,052.000 6,052.00 Vol. Safeguarding Social Security For Future Generations: Leaving A Legacy In An Aging Society. Achenbaum, 9781032386348, 2023 1 4,700.000 4,700.00 Vol. Securitizing Marine Protected Areas \1ed.. Desanto, Elizabeth M., 9781032040967, 2025 1 4,956.000 4,956.00 Vol. Seeing Through Statistics \5ed.. Utts, Jessica M., 9780357757505, 2025 1 9,230.000 9,230.00 Vol. Sentencing And Punishment 5e. Easton, 9780192863300, 2023 1 6,780.000 6,780.00 Vol. Service Management And Marketing Principles \1ed.. Kandampully, Jay, 9781032749655, 2024 1 4,498.000 4,498.00 Vol. Shuggie Bain. By Douglas Stuart,9780802148049, C2020 1 1,300.000 1,300.00 Vol. Simplifying Stem [6-12]: Four Equitable Practices To Inspire Meaningful Learning. Jackson, 9781071917060, 2024 1 4,200.000 4,200.00 Vol. Simplifying Stem [prek-5]: Four Equitable Practices To Inspire Meaningful Learning. Jackson, 9781071917053, 2024 1 4,200.000 4,200.00 Vol. Simply Ai: Facts Made Fast / 160pp / Hb / Dorling Kindersley / 2024 / 9780241694176, 2024 1 1,900.000 1,900.00 Vol. Smart City 2.0: Strategies And Innovations For City Development . Oh Deog-seong Et Al, 9789811257179, 2023 1 14,120.000 14,120.00 Vol. Social Media In Legal Practice. Edited By Bhatia, 9780367347727, 2021 1 18,580.000 18,580.00 Vol. Social Media Strategy: A Practical Guide To Social Media Marketing And Customer Engagement . Atherton, 9781398609990, 2023 1 3,510.000 3,510.00 Vol. Social Psychology 3e Ise. Saul Kassin, 9781071942246, 2024 1 15,480.000 15,480.00 Vol. Sociology: A Brief Introduction \15ed.. Schaefer, Richard T., 9781266826177, 2024 1 5,116.000 5,116.00 Vol. Soft Skills For Dummies. Reiman, 9781119906551, 2023 1 2,590.000 2,590.00 Vol. Soft Skills: How To See, Measure And Build The Skills That Make Us Uniquely Human 1e . Moldoveanu, 9783111050591, 2024 1 3,880.000 3,880.00 Vol. Software Project Management \1ed.. Peters, Lawrence J., 9781032430577, 2024 1 5,563.000 5,563.00 Vol. Sport Coach Learning And Professional Development \1ed.. Muir, Bob, 9781032140933, 2024 1 4,349.000 4,349.00 Vol. Strategic Planning For Public And Nonprofit Organizations, 6ed.. Bryson, John M., 9781394274024, 2024 1 6,696.000 6,696.00 Vol. Strength Training For All Body Types 1e. Boyce, 9781718212671, 2023 1 4,850.000 4,850.00 Vol. Succeeding In Your Psychotherapy Practicum & Internship \1ed. Reiter, Michael D., 9781032559902, 2025 1 6,049.000 6,049.00 Vol. Such A Fun Age. By Kiley Reid,9780525541905, C2020 1 1,300.000 1,300.00 Vol. Supporting The Mental Health & Wellbeing Of Learners In Post. Demetriou, Paul, 9781032543369, 2025 1 3,378.000 3,378.00 Vol. Teaching Information Systems. Hwang, Mark I., 9781802205787, 2024 1 15,323.000 15,323.00 Vol. Teaching Literacy Effectively In The Modern Classroom For Ag. Dymock, Sue, 9780367673154, 2025 1 3,135.000 3,135.00 Vol. Teaching Middle School Physical Education \1ed.. Gosset, Michael E., 9781032698366, 2025 1 3,378.000 3,378.00 Vol. Teaching Physical Education To Children With Autism. Mokin, Bill, 9781032569017, 2024 1 3,398.000 3,398.00 Vol. Teaching Public Relations \1ed.. Smudde, Peter M., 9781032805252, 2025 1 5,320.000 5,320.00 Vol. Teaching Reading Across The Day, Grades K-8: Methods And Structures For Engaging Explicit Instru.... Serravallo, 9781071924600, 2024 1 4,200.000 4,200.00 Vol. Teaching Women's History \1ed.. Eckert, Kelsie Brook, 9781032693118, 2024 1 3,378.000 3,378.00 Vol. Teaching Your Kids New Math (k-5 For Dummies . Jamsa, 9781119867098, 2022 1 4,050.000 4,050.00 Vol. Technologies For Children. Fleer, 9781009229593, 2024 1 9,700.000 9,700.00 Vol. Technology For Success: Computer Concepts \2ed.. Campbell, Jennifer, 9780357883235, 2025 1 9,230.000 9,230.00 Vol. The Age Of Ai: And Our Human Future. By Henry A. Kissinger, Eric Schmidt, Daniel Huttenlocher,9780316273800, C2021 1 1,800.000 1,800.00 Vol. The Anthropocene Reviewed: Essays On A Human-centered Planet. By John Green,9780525555216, C2021 1 1,300.000 1,300.00 Vol. The Art Of Machine Learning/ 9781718502109, 2024 1 10,745.000 10,745.00 Vol. The Artificial Intelligence Playbook: Time-saving Tools For Teachers That Make Learning More Eng.... Hargrave, 9781071949634, 2024 1 3,920.000 3,920.00 Vol. The Book Of Form And Emptiness. By Ruth Ozeki,9780399563645, C2021 1 1,600.000 1,600.00 Vol. The Boy, The Mole, The Fox And The Horse. By Charlie Mackesy,9780062976581, C2020 1 1,300.000 1,300.00 Vol. The City We Became. By N.k. Jemisin,9780316509848, C2020 1 1,500.000 1,500.00 Vol. The Code Breaker: Jennifer Doudna, Gene Editing, And The Future Of The Human Race. By Walter Isaacson,9781982115852, C2021 1 1,800.000 1,800.00 Vol. The Comfort Book. By Matt Haig,9781786898296, C2021 1 1,150.000 1,150.00 Vol. The Dawn Of Everything: A New History Of Humanity. By David Graeber, David Wengrow,9780374157357, C2021 1 1,900.000 1,900.00 Vol. The Fairchild Books Dictionary Of Textiles: Bundle Book + Studio Access Card. Sarkar, 9781501365133, 2023 1 10,750.000 10,750.00 Vol. The Future We Choose: Surviving The Climate Crisis. By Christiana Figueres, Tom Rivett-carnac,9780525658351, C2020 1 1,350.000 1,350.00 Vol. The Guncle. By Steven Rowley, 9780525542285, C2021 1 1,300.000 1,300.00 Vol. The Hill We Climb: An Inaugural Poem For The Country. By Amanda Gorman,9780593465271, C2021 1 1,000.000 1,000.00 Vol. The House In The Cerulean Sea. By Tj Klune,9781250217288, C2020 1 1,250.000 1,250.00 Vol. The Invisible Life Of Addie Larue. By V.e. Schwab,9780765387561, C2020 1 1,600.000 1,600.00 Vol. The Last House On Needless Street. By Catriona Ward,9781250812629, C2021 1 1,250.000 1,250.00 Vol. The Light We Carry: Overcoming In Uncertain Times. By Michelle Obama,9780593237465, C2022 1 1,600.000 1,600.00 Vol. The Lincoln Highway. By Amor Towles,9780735222359, C2021 1 1,600.000 1,600.00 Vol. The Love Songs Of W.e.b. Du Bois. By Honorée Fanonne Jeffers,9780062942937, C2021 1 1,700.000 1,700.00 Vol. The Man Who Died Twice (thursday Murder Club 2. By Richard Osman, 9780241425428, C2021 1 1,250.000 1,250.00 Vol. The Manual On Barbering, Hairdressing, Manicuring, Facial Massage . -, 9781015893399, 2022 1 3,730.000 3,730.00 Vol. The Midnight Library. By Matt Haig,9781786892737, C2020 1 1,200.000 1,200.00 Vol. The Ministry For The Future. By Kim Stanley Robinson,9780316300148, C2020 1 1,600.000 1,600.00 Vol. The Nervous System: Systems Of The Body Series 3ed. Adina Michael-titus, 9780702083402, 2023 1 5,770.000 5,770.00 Vol. The Night Watchman. By Louise Erdrich,9780062671189, C2020 1 1,350.000 1,350.00 Vol. The Paper Palace. By Miranda Cowley Heller,9780593329825, C2021 1 1,350.000 1,350.00 Vol. The Paris Library. By Janet Skeslien Charles,9781982134198, C2021 1 1,250.000 1,250.00 Vol. The Power Of Regret: How Looking Backward Moves Us Forward. By Daniel H. Pink,9780735210653, C2022 1 1,350.000 1,350.00 Vol. The Premonition: A Pandemic Story. By Michael Lewis,9780393881554, C2021 1 1,700.000 1,700.00 Vol. The Prophets. By Robert Jones Jr.,9780593085684, C2021 1 1,500.000 1,500.00 Vol. The Psychology Of Money: Timeless Lessons On Wealth, Greed, And Happiness. By Morgan Housel,9780857197689, C2020 1 1,250.000 1,250.00 Vol. The Sage Handbook Of Mixed Methods Research Design. Poth, 9781529723960, 2023 1 18,520.000 18,520.00 Vol. The Science Museum 100 Biology Ideas In 100 Words / Eva Amsen / 192pp / Hb / Dorling Kindersley / 2024 / 9780241659625, 2024 1 2,400.000 2,400.00 Vol. The Sentence. By Louise Erdrich,9780062671127, C2021 1 1,350.000 1,350.00 Vol. The Sports Book / 456pp / Hb / Dorling Kindersley / 2024 / 9780241656945, 2024 1 3,850.000 3,850.00 Vol. The Story Of Southeast Asia / Thompson, Eric, 9789813252349, 2024 1 4,850.000 4,850.00 Vol. The Sum Of Us: What Racism Costs Everyone And How We Can Prosper Together. By Heather Mcghee,9780525509561, C2021 1 1,700.000 1,700.00 Vol. The Vanishing Half. By Brit Bennett,9780525536291, C2020 1 1,400.000 1,400.00 Vol. The Washington Manual Of Surgery 9e. Wise, 9781975201258, 2024 1 8,630.000 8,630.00 Vol. The Weirdest People In The World: How The West Became Psychologically Peculiar And Particularly Prosperous. By Joseph Henrich,9780374173227, C2020 1 1,700.000 1,700.00 Vol. The World Almanac And Book Of Facts 2025 1 2,530.000 2,530.00 Vol. Thermodynamics Fundamentals And Applications \1ed.. Uddin, Naseem, 9781032729381, 2025 1 15,374.000 15,374.00 Vol. Think Again: The Power Of Knowing What You Don't Know. By Adam Grant,9781984878106, C2021 1 1,350.000 1,350.00 Vol. Under A White Sky: The Nature Of The Future. By Elizabeth Kolbert,9780593136270, C2021 1 1,600.000 1,600.00 Vol. Understanding Business \14ed.. Nickels,, 9781266813016, 2024 1 5,116.000 5,116.00 Vol. Understanding Comparative Politics: An Inclusive Approach 1e Ise. Baglione, 9781071942291, 2024 1 14,290.000 14,290.00 Vol. Understanding Intellectual And Developmental Disabilities. Iarocci, 9781446296462, 2024 1 5,560.000 5,560.00 Vol. Understanding Intellectual Disabilities \3ed.. Richards, Stephen B., 9781032369037, 2024 1 8,598.000 8,598.00 Vol. Understanding International Politics: The Student Toolkit. Megan Dee, 9781350381650, 2024 1 4,880.000 4,880.00 Vol. Understanding Naval Warfare 3e . Speller, 9781032223339, 2024 1 5,990.000 5,990.00 Vol. Unsteady Aerodynamics: Potential And Vortex Methods. Seabridge, Allan, 9781119762478, 2024 1 12,420.000 12,420.00 Vol. Untamed. By Glennon Doyle,9781984801258, C2020 1 1,350.000 1,350.00 Vol. Victimology \10ed.. Doerner, William G., 9781032488899, 2025 1 9,206.000 9,206.00 Vol. Web Development : Full Stack, 1st Edition, Cengage,9780357673850,2024 1 14,442.000 14,442.00 Vol. Web Scraping With Python: Data Extraction From The Modern Web . Mitchell, Ryan, 9781098145354, 2024 1 7,650.000 7,650.00 Vol. Wireless Communication Technologies \1ed.. Sharma, Vandana, 9781032481647, 2024 1 15,278.000 15,278.00 Vol. Writing Skills For Behavior Analysts \1ed.. Reinecke, Dana, 9781032732848, 2025 1 3,742.000 3,742.00 Mode Of Procurement: Public Bidding Delivery Term: Within 60 Working Days From The Receipt Of Purchase Order One Million Four Hundred Sixty Six Thousand Pesos 265 Titles/265 Vols. Total 1,466,000.00

Details: Aflcmc Data Operations Cso 1.0 Overview this Commercial Solutions Opening (cso) Is Intended To Be A Streamlined Vehicle To Allow For The Establishment Of A Modern Data Operations (dataops) Solution Supporting A Variety Of Critical National Security Systems. This Cso Authority Is Established Under Section 803 Of The National Defense Authorization Act (ndaa) For Fiscal Year (fy) 2022 (pub. L. 117-81) And Class Deviation 2022-o0007. The Air Force Life Cycle Management Center (aflcmc) Programs Require The Utilization And Leveraging Of The Latest Technology Advances From A Large Variety Of Prospective Contractors. Aflcmc Invites Innovating Technical Approach Proposals Addressing All Aspects Of Dataops Focusing On The Below Objective Areas. However, These Enumerated Focus Areas Are Minimum Requirements, And Aflcmc Is Open To The Identification Of Technologies Useful For Modernizing Dataops For Sophisticated Security And Weapon Systems. This Requires Delivering An Enduring, Secure, Robust, Efficient, Responsive, Agile, Elastic, And Extensible Classified Dataops Solution. This Cso Will Focus On Existing And Emerging Technologies And Platforms Across Aflcmc, Department Of The Air Force (daf), Department Of Defense (dod) And The Intelligence Community, As Well As Leveraging Commercial Markets To Perform An Integrated Analysis Of The Capabilities Of Varying Technologies That Support Our Critical National Security Systems And Prioritize Investments Over Time. the Cso May Result In The Award Of Far Part 12 Contracts Or Other Transaction Agreements (otas) Under 10 Usc 4022, Through Calls Via Amendments To The Cso. The Government Anticipates Future Calls To Be Competitively Solicited. These Calls Will Contain Specific Areas Of Interest, User Stories And/or Problem Statements Related To Program Specific Dataops Focus Areas. These Specific Areas Of Interest Are What Prospective Contractors Shall Focus Their Solutions Towards. The Government Reserves The Right To Issue Separate Calls For Each Dataops Focus Area Or Combine Several Focus Areas Under An Individual Call. disclaimer: No Proposals Or White Papers Are Being Requested At This Time. Those Will Be Requested Via Calls Published Under The Cso Solicitation. aflcmc Is Not Obligated To Make Any Awards From Any Publicized Call, And All Awards Under This Cso Are Explicitly Subject To The Availability Of Funds And Successful Negotiations. The Government Is Not Responsible For Any Monies Expended By Any Vendor Prior To The Issuance Of Any Awarded Contract/agreement. Aflcmc Reserves The Right To Modify The Solicitation Requirements Of This Cso And Each Subsequent Call At Its Sole Discretion. this Cso Seeks To Fund Innovative Technologies That Propose New Solutions To Expand Aflcmc’s Capabilities As It Relates To Modern Dataops Focus Areas. Aflcmc Is Interested In Capabilities From All Interested Vendors To Include, But Not Limited To, Traditional Defense Contractors, Nontraditional Defense Contractors, Large Businesses, Small Businesses, And Research Institutions (collectively Referred As Vendors). It Should Be Noted, Many Of The Critical National Security Systems Operate In Varying Classification Environments, Including Highly Classified Environments – Such As Collateral, Sensitive Compartmentalized Information, And Special Access Program. Though Some Dataops Focus Areas May Require Unclassified Work, Respondents Should Be Aware That Vendors Cleared To Work, Or The Ability To Be Cleared To Work, In Highly Classified Environments Will Be Necessary For Any Award. The Cso Is A Streamlined Acquisition Process That Seeks To Reduce Acquisition Timelines And Acquire New, Innovative Solutions That Vendors Can Bring Forth To Meet The Stated Areas Of Interest Detailed In Each Call. 2.0 Dataops Technology Focus Areas aflcmc Is Seeking Capabilities To Prove Out End-to-end Dataops For Representative Modern Embedded Weapon Systems. The Desired End-state Is A Dataops Capability/prototype That Enables A Weapon System To Exploit Data Across The Full Lifecycle Of An Embedded Weapon System (development, Integration, Test, Deployment, Operations And Sustainment) Across All Classification Levels. An Ideal Partner Has First-party Ability To Directly Modify Underlying Commercial Hyperscale And Edge Cloud Fabric To Meet The Project’s Requirements Across All Classification Levels And Supporting Partners Would Be Considered As Enabling Providers Supporting Specific Aspects Of The Potential Solution. each Technology Focus Area Identifies An Area Where Prospective Vendors Can Bring Substantial Value To Meet The Dataops Mission. These Focus Areas Are Meant To Be Read Expansively And Are Not Limited To The Enumerated Focus Areas. Additional Focus Areas May Be Included Via Amendments To This Cso. Aflcmc Prefers To Bucket Several Focus Areas Into Singular Calls, Which Means Vendors That Can Optimize Several Focus Areas Will Be Preferred. Aflcmc Requires Provider(s) To Deliver An Innovative State-of-the-art Commercial Solution That Innovates All Or Some Of The Following Capability Areas. whether Using A Single Vendor Or Using Multiple Vendors, Aflcmc’s Intended Minimum Viable Product (mvp) Should Contain The Following Six Foundational Attributes: 1. Hybrid Cloud Iaas, Paas, Saas: aflcmc Seeks Solutions For Infrastructure As A Service (iaas), Platform As A Service (paas), And Software As A Service (saas) That Can Be Hosted In A Hybrid Cloud Architecture. For The Purposes Of This Cso, “hybrid Cloud” Is Defined As: A Virtual Environment Provided To A Single Customer That Combines Private Cloud Compute, Storage, And Services Running On-premises With Compute, Storage, And Services Running In A Public Cloud Along With The Ability To Move Information Seamlessly And Transparently Between Them. All Offerings Will Be Templated, Extensible, And Elastically Scalable On Converged And/or Hyperconverged Infrastructure. All Offerings Will Support “bring Your Own ‘x’,” Such That Aflcmc Can Re-host Existing Workloads Without Interruption. All Offerings Will Comply With Relevant Department Of Defense Instructions, Regulations, And Policies Such That They Will Be Readily Accreditable And Interoperable With Existing Dod Networks And Information Systems At The Unclassified, Secret, And Top-secret Classification Levels. Additionally, All Offerings Will Be Accredited Or Readily Accreditable To Handle Special Access Program (sap) And Sensitive Compartmented Information (sci) Handling Caveats At The Secret And Top-secret Classification Levels. 2. Information Transport aflcmc Is Seeking Solutions For Information Transport That Complies With Relevant Department Of Defense Instructions, Regulations, And Policies Such That Any Transport Solution Offering Will Be Readily Accreditable And Interoperable With Existing Department Of Defense Information Networks (dodin). Information Transport Offerings Will Also Be Required To Interoperate With The Hybrid Iaas, Paas, And Saas Solutions Offered Under Technology Focus Area (1). All Information Transport Offerings Must Operate In Multi-level Classification Environments, Enabling Multi-modal Connectivity From Anywhere In The Continental United States (conus) Via A High-bandwidth/low-latency Transport Solution. Cryptographic Transport Shall Meet National Security Agency (nsa) Type 1 Encryption Products Or Equivalent Cryptographic Solutions. Further, Aflcmc Requires Capability To Support Edge Resources To Operate In Disconnected, Intermittently Connected Or Low-bandwidth (dil) Environments. Initial Connectivity Shall Encompass Wright-patterson Air Force Base (afb), Edwards Afb, Tinker Afb And An Off-base Facility In The Dayton, Ohio Greater Metropolitan Area. 3. Fielding Operations aflcmc Is Seeking Solutions To Rapidly Deploy The Solutions Acquired Under Focus Areas (1) And (2). To Support Our System Program Offices, Aflcmc Desires Rapid “full Network/crypto” Deployability To New Locations Within 30 Days From Award. Connections Should Include All Enterprise Capabilities Such As Nipr, Sipr, Jwics, Existing Classified, Sap Capable, Hyper-elastic Cloud Regions And Other Program Networks. Moreover, Aflcmc Seeks Automated Disaster Recovery Functionality To Support Continuity Of Operations (coops). 4. Crypto-net Managements/commercial Solutions For Classified aflcmc Requires Innovative Commercial Products To Be Used To Protect Classified Data, Including Both Data-in-transit (dit) And Data-at-rest (dar). To The Maximum Extent Practicable, Technologies For Aflcmc Shall Be Procured In Accordance With Requests Commercial Solutions For Classified (csfc) Services To Comply With The Committee On National Security Systems Policy (cnssp) No. 11, National Policy Governing The Acquisition Of Information Assurance And Ia-enabled Information Technology Products.” 5. Network Operations Center (noc) / Security Operations Center (soc) aflcmc Is Seeking Solutions To Support, Enable, And Augment Network Administration And Cybersecurity Operations For Solutions Acquired Under Focus Areas (1) And (2). Solutions Will Include Services That Enable Real-time And Near Real-time Metering, Auditing, Logging, Monitoring, And Status Reporting Of The Entire Virtual Environment. 6. Help Desk aflcmc Requires A Customer Support Help Desk To Assist End-users In Navigating, Utilizing And Accessing Data Within The Cloud Environments. Aflcmc Envisions A Software-as-a-service That Can Manage All Communication And Network Channels, Establish Performance Metrics And Monitoring, And Is Maximally Available To Meet Mission Requirements. aflcmc Is Interested In Additional Focus Areas Beyond The Above Six (6) Foundational Dataops Focus Areas. Aflcmc May Issue Calls Against The Below Supplemental Focus Areas. These Supplemental Focus Areas Are Meant To Be Read Expansively And Not Limited To The Enumerated Areas. Additional Focus Areas Beyond Those Enumerated Below May Be Included Via An Individual Call Against This Cso. Vendors That Meet Some Or All The Above Focus Areas May Also Identify Capabilities For The Additional Focus Areas. i. Secure Access Service Edge aflcmc Has A Requirement To Provide Consistent, Fast And Secure Access To Dispersed End Users Operating In Permanent Military Installations As Well As Forward Operating Base. Services Should Establish Identity-driven Security Compliant With Us Government Security Parameters For All Classification Levels (unclassified, Secret, Top Secret And Sap Programs). ii. Software-defined Networking (sdn) aflcmc Has A Requirement To Explore Implementing Sdn For Fully Networked Command, Control And Communications (c3) Functionality, Particularly In Day-to-day Military Operating Base (mob) And Sustainment Missions. Sdn Should Contain A High Degree Of Network Programmability And Reconfigurability To Meet The Needs Of Different Government Systems And Emphasize Advantageous Situational Awareness For Faster Response Times. Further, Aflcmc Is Interested In Other Ways Sdn Can Be Applied To Military Environments While Preserving Data Security. iii. Edge Hyper-converged Infrastructure aflcmc Anticipates Migrating Away From Discrete, Hardware-defined Systems Toward Software-defined Environments Permitting All Functionality Through Commercial Service Platforms While Protecting Data At All Classification Levels (unclassified, Secret, Top Secret, Sap). iv. Zero Trust Architecture given The Security Posture Of Many Programs, Aflcmc Requires Zero Trust Security Architecture By “never Trusting, Always Verifying” Network Security. Aflcmc Desires Strong Identity Verification, Validation Of Device Compliance Before Granting Access And Ensuring Least Privilege Access. v. Infrastructure As Code (iac) infrastructure As Code Is The Process Of Managing And Provisioning Computer Data Centers Through Machine-readable Definition Files, Rather Than Physical Hardware Configuration Or Interactive Configuration Tools. Aflcmc Seeks Partners Who Would Be Able To Expedite The Onboarding Process For New Players By Inflating An Iac Instance Within A Cloud Environment, Enabling Immediate Executability Of Licenses, Cloud Resource Management, And Other Capabilities. vi. Cloud Native Design on-premises (on-prem) Infrastructure Comes With An Immense Number Of Limitations As Well As A High Threshold For Entry For New Players In Terms Of Hardware Investments And Schedule Lead Times. Utilization Of Cloud Native Designs For All Network Mapping, Tooling, Iaas, Etc. Is Of Extreme Interest To Aflcmc. vii. Software Defined Perimeter Enabling Classified Data Processing aflcmc Participates In Work Ranging From Cui All The Way Up To Ts/sar/sci. Having Cloud Native, Logically Defined Perimeters Around Separate Enclaves That Exist At Various Classification Levels Is Critical To Mission Success. Organizations Should Be Prepared To Provide A Body Of Evidence To Demonstrate Logical Controls That Safeguard Information At Different Impact Levels (ils). viii. Augmented And Virtual Reality Capabilities (e.g., Training, Maintenance, Etc.) aflcmc Requires Commercial Augmented And Virtual Reality Capabilities To Assist Usaf Maintenance And Service Technicians To Interface With Usaf Systems. Applications Should Have Practical Maintenance Applications As Well As Training Capabilities. ix. Data Encryption (at Rest, In Motion, Fips 140-3) experience With Encrypting And Safeguarding Data Is Critical To Dod Success And Cybersecurity. Fips 140.3 Is The Standard That Shall Be Used In Designing And Implementing Cryptographic Modules That Federal Departments And Agencies Operate Or Are Operated For Them Under Contract. The Standard Provides Four Increasing, Qualitative Levels Of Security Intended To Cover A Wide Range Of Potential Applications And Environments. The Security Requirements Cover Areas Related To The Secure Design, Implementation, And Operation Of A Cryptographic Module. These Areas Include Cryptographic Module Specification; Cryptographic Module Interfaces; Roles, Services, And Authentication; Software/firmware Security; Operating Environment; Physical Security; Non-invasive Security; Sensitive Security Parameter Management; Self-tests; Life-cycle Assurance; And Mitigation Of Other Attacks. Organizations With Familiarization And Expertise With Establishing And Maintaining Compliant Data Encryption Could Be Of Use To The Dod. x. Cyber, Secure Processing due To The Sensitive Nature Of The Usaf Mission, The Ability To Leverage Cyber Secure Processing, Compliant With Dod Standards For All Impact Levels Is Required. xi. Machine Learning (ml) And Artificial Intelligence (ai) Data Factories aflcmc Seeks To Find New And Innovative Ways To Deploy And Enable Ai/ml To Identify Areas Of Interest Within Large Data Sets. These Data Factories Should Be Able To Pinpoint Concerns, Operational Or Safety Threats, And Shall Help Alleviate Human In The Loop (hitl) Man Hours Currently Required To Analyze Data Sets. xii. Big Data Capability (data Warehousing, Data Lakes, Restructured Data Engineering) test Sets Drive A Requirement To Capture, Transport, And Analyze Massive Amounts Of Data In Near-real-time, As Well As A Requirement To Host Portions Of That Data For An Indefinite Amount Of Time. Aflcmc Has Interest In Organizations That Have Experience With Long-term Data Lakes, And Data Storage With The Ability To Enable Petabyte And Exabyte Transport At High Speeds Between Various Conus And Oconus Locations. xiii. Continuous Integration (ci)/continuous Development (cd) Software Pipeline aflcmc Utilizes A Devsecops Framework For Many Of Its Projects. Ci/cd Pipelines Enable Alfcmc To Adapt To Emerging Threats. Entities With Experience In Optimization And Automation Of Ci/cd Pipelines Would Be Of Particular Use To The Dod. xiv. Application Development + Application Refactoring For Cloud Deployment aflcmc Sees A Future Use Case Of Being Able To Pull Data Developed From Another Dod Organization To Be Easily Digested And Absorbed From A Cloud Environment And Then Re-tooled To Meet Mission Requirements. Aflcmc Requires A Cloud-based Platform To Host Both The Outputs Of Application Development (ie App Store) As Well As A Toolkit To Refactor An Applications Targeted Use. xv. Existing Capability Refactoring/integration For Application Programming Interface (api) Microservice Architecture aflcmc Has A Potential Future Requirement To Establish A Microservice Architecture To Iteratively Build New Applications/capability Without Impacting Availability Of Systems. Aflcmc Requires Microservice Refactoring Within Designated Cloud-based Platforms. xvi. Reverse Engineering aflcmc Has A Potential Future Requirement For Reverse Engineering Services. In Instances Where Aflcmc Lacks Sufficient Engineering Data For Varying Aircraft Or Supporting System Parts, Aflcmc Desires The Ability To Conduct Reverse Engineering Services To Produce Underlying Engineering Data Necessary For Alternate Sourcing Of Parts Or Manufacturing Of The Parts. xvii. Additive Manufacturing aflcmc Desires Additive Manufacturing Services With The Capacity For Potential On-premises Manufacture Of Varying Parts. Aflcmc Seeks Commercial Application Of 3d Printers And Other Technologies That Permit Immediate Production Of Parts To Reduce Mission Incapable Awaiting Parts (micap) Status Of Critical Systems/assets. 3.0 Cso With Calls this Cso Is A Hybrid Solicitation Against Which Both Closed Calls And/or Open Period Calls Can Be Published Via Amendments To The Cso. All Calls Issued Under This Cso Will Include Specific Instructions Including Dates, Areas Of Interest/focus Areas, Evaluation Criteria And Proposal Instructions To Offerors. While Each Offer Shall Adhere To This Cso, The Calls May Contain Other Information Of Which The Proposing Vendors Should Also Strictly Adhere. Each Call Will Be Announced On The Government Point Of Entry (beta.sam.gov), Which May Result In The Award Of A Far Part 12 Contract Or An Other Transaction Agreement (ota) Under 10 Usc 4022. 3.1 Closed Calls (one-step Or Two-step) over The Period Of This Cso, Calls May Be Issued To Request White Papers And/or Proposals For Specific Areas Of Interest/focus Areas. It Will Be Determined On A Call-by-call Basis Whether The Announcement Is For A One-step (proposals Only) Or A Two-step Process (white Paper First, Then Proposals By Invite-only). The Submission For White Papers And Proposals Shall Be Submitted At A Specific Date And Time As Set For In Each Particular Call. White Papers And/or Proposals May Not Be Reviewed If Submitted After The Stated Date And Time. 3.1.1 One-step Calls step 1: Proposal Due Date And Time Will Be Provided In Calls Issued Against This Cso. Aflcmc Will Make Selections From Vendor Proposals Only In Accordance With The Evaluation Criteria Contained In The Call. 3.1.2 Two-step Calls step 1: White Paper Due Date And Time Will Be Provided In Calls Issued Against This Cso. Aflcmc, At Its Sole Discretion, May Or May Not Request A Presentation Or Discussion With Government Personnel About The White Paper. step 2: Proposal Due Date And Time Will Be Provided In Requests For Proposal (rfps) Sent To Offers That Submit White Papers Who Are Evaluated Favorably In Accordance With The Evaluation Criteria Contained In Each Call. 3.2 Open Period Calls (two-step) this Cso May Also Have Open Period Calls. Open Period Calls Will Only Be Issued Under A Two-step Process (see 3.1.2 Above). After An Open Call Is Published, White Papers May Be Submitted At Any Time During An Open Period For The Areas Of Interest/focus Areas Detailed Within The Call. It Is Important To Note That Only White Papers Submitted In Response To Specific Areas Of Interest/focus Areas Detailed In The Call Will Be Considered. step 1: White Paper Due Date And Time Will Be Provided In Calls Issued Against This Cso. Aflcmc, At Its Sole Discretion, May Or May Not Request A Presentation Or Discussion With Government Personnel About The White Paper. step 2: Proposal Due Date And Time Will Be Provided In Requests For Proposal (rfps) Sent To Offers That Submit White Papers Who Are Evaluated Favorably In Accordance With The Evaluation Criteria Contained In Each Call. 4.0 Definitions cso With Calls: This Allows For The Publication Of An Umbrella Cso Solicitation That Contains Overarching Information But Does Not Request White Papers Or Proposals. The Cso Functions As A Framework Identifying The Technical Areas And Giving The Basic Terms And Administrative Information Of The Cso. The Requests For White Papers And/or Proposals Are Done By Issuing Calls That Are Published Via Amendments To The Cso. Calls Can Be Issued At Any Time During The Period Of Performance Of The Cso. Each Call Will Be Tailored To Best Fit The Acquisition Approached Identified By The Government. The Calls May Also Include Specific Terms And/or Conditions That Apply To That Particular Call Such As Technical Details, Security Requirements And/or Other Pertinent Clauses. Proposals Or White Papers Are Submitted Only When Calls Under This Cso Are Published. open Period Calls: This Type Of Call Allows For White Paper And Proposal Submittals At Any Time Within A Specified Period As Set Forth In The Subsequent Call. closed Calls: This Type Of Call Allows For White Paper And/or Proposal Submittals At A Specified Date And Time As Set Forth In The Subsequent Call. This Process And The Dates Associated With It Are More Structured Than Open Period Calls. areas Of Interest/ Focus Areas: These Are Specific Requests For Innovative Solutions That Aflcmc Will Detail In Each Subsequent Call And Will Derive From The Technology Focus Areas (2.0 Above). Vendor’s Innovative Solutions Should Focus On Addressing The Specific Technology Focus Areas Contained Within A Specific Call. white Paper: A Brief (usually 2-5 Pages) Summary Of The Proposed Technical Approach With An Accompanying Rough Order Of Magnitude (rom) Price. pitch Day: Pitch Day Is A Tool That Can Be Used As Part Of The Call Process. When Used, Pitch Day Gives Vendors An Opportunity To Meet Aflcmc Personnel In-person And Provide A Pitch Of Their Proposed Technology. If A Pitch Day Is Utilized, Specific Details Explaining The Process And Evaluation Methods Will Be Contained Within A Specific Call. other Transaction: Refers To The Type Of Other Transaction Agreement (ota) That May Be Placed As A Result Of This Cso And Associated Calls. This Type Of Ot Is Authorized By 10 Usc 4022 For Prototype Projects Directly Relevant To Enhancing The Mission Effectiveness Of Military Personnel And The Supporting Platforms, Systems, Components, Or Materials Proposed To Be Acquired Or Developed By The Department Of Defense (dod), Or For The Improvement Of Platforms, Systems, Components, Or Materials In Use By The Armed Forces. This Type Of Ota Is Treated By Dod As An Acquisition Instrument, Commonly Referred To As An “other Transaction” For A Prototype Project Or A Section 4022 “other Transaction.” prototype Project: Can Generally Be Described As A Proof Of Concept, Model, Reverse Engineering To Address Obsolescence, Pilot, Novel Application Of Commercial Technologies For Defense Purposes, Agile Development Activity, Creation, Design, Development, Demonstration Of Technical Or Operational Utility, Or Combinations Of The Foregoing. A Process, Including A Business Process, May Also Be The Subject Of A Prototype Project. Although Assistance Terms Are Generally Not Appropriate In Ot Agreements In 10 U.s.c. 4022, Ancillary Work Efforts That Are Necessary For Completion Of The Prototype Project, Such As Test Site Training Or Limited Logistics Support, May Be Included In Prototype Projects. A Prototype May Be Physical, Virtual, Or Conceptual In Nature. The Quantity Of Prototypes/commercial Solutions Should Generally Be Limited To That Needed To Prove Technical Or Manufacturing Feasibility Or Evaluate Military Utility. innovative: This Refers To Any Technology, Process, Or Method, Including Research And Development That Is New As Of The Date Of Proposal Submission; Or Any New Application Of An Existing Technology, Process Or Method As Of The Proposal Date. nontraditional Defense Contractor: As Defined In 10 U.s.c. 2302(9) As An Entity That Is Not Currently Performing And Has Not Performed, For At Least The One-year Period Preceding The Solicitation Of Sources By The Dod For The Procurement Or Transaction, Any Contract Or Subcontract For The Dod That Is The Subject For Full Coverage Under The Cost Accounting Standards Prescribed Pursuant To 41 U.s.c. 1502 And The Regulations Implementing Such Section. This Includes All Small Business Concerns Under The Criteria And Size Standards In 13 C.f.r. Part 121. small Business Concern: Defined In The Small Business Act (15 U.s.c. 632) And 13 C.f.r. Part 121. 5.0 Contract/agreement Details as Stated In The Overview Section, Calls Issued Under This Cso Can Result In The Award Of Either A Far Part 12 Contract Or An Other Transaction Agreement (ota) Under 10 U.s.c. 4022. Regardless Of The Contract Instrument, Aflcmc Chooses To Pursue The Contract/agreement Type For All As Fixed Price, Which Includes Firm Fixed Price (ffp) And Fixed Price Incentive (fpi). Future Solicitations Are Not Accepting Offers For Grants Or Cooperative Agreements As The Purpose Of This Cso Is To Transfer Something Of Value Directly To The Government. the Government Will Be The Sole Decision Authority On Whether To Pursue A Far Part 12 Contract, An Ota Or No Award At All. The Government Reserves The Right To Award Some, All Or None Of The Proposal From The Responses To Each Call. The Contracting/agreements Officer Reserves The Right To Negotiate Directly With The Offeror On The Terms And Conditions Prior To Execution Of The Resulting Contract/agreement On Behalf Of The Government. Be Advised That Only A Contracting/agreements Officer Has The Authority To Enter Into, Or Modify, A Binding Contract/agreement On Behalf Of The United States Government. 5.1 Prototyping this Cso May Result In The Award Of Prototype Projects, Which Include Not Only Commercially Available Technologies Fueled By Commercial Or Strategic Investment, But Also Concept Demonstrations, Pilots, And Agile Development Activities That Can Incrementally Improve Commercial Technologies, Existing Government-owned Capabilities, And/or Concepts For Broad Defense And/or Public Application. The Government Reserves The Right To Award A Far Part 12 Contract Or An Other Transaction (ot) Under 10 U.s.c. 4022 Agreement (including An Ot For A Prototype Project And A Follow-on Ot Or Contract For Production), Or A No Award At All. Calls Issued Under This Cso Constitute Competitive Procedures. Aflcmc May Competitively Award Ots For Prototype Projects That Provide For The Award Or A Follow-on Production Contract Or Ot For Production To Participants In The Ot For Prototype Projects Without The Use Of Further Competitive Procedures, If The Participant In The Ot For Prototype Projects Successfully Completes The Prototype Project, As Permitted By 10 Usc 4022(f). 5.1.1 Iterative Prototyping a Contract Or Ot For A Prototype Awarded Under This Cso Shall Allow For An Iterative Prototyping Process. An Iterative Prototyping Process Will Allow The Government To Modify, By Mutual Agreement, The Scope Of A Prototype Contract Or Ot To Allow For The Adaptation And Modification Of The Technology Being Prototyped To Meet Additional Unique And Discrete Purposes/mission Sets. The Sequential Prototype Iterations May Result In A Separate Prototype Project Rather Than A Modification Of The Original Prototype Contract Or Ot. These Additional Unique And Discrete Purposes/mission Sets Can Be Generated By Aflcmc Or Originate Within Any Organization That Aflcmc Supports. 5.1.2 Successful Completion Of A Prototype a Prototype Project Is Complete Upon The Written Determination Of The Appropriate Approving Official (program Manager And Contracting/agreements Officer) For The Matter In Question That The Efforts Conducted Under A Prototype Contract Or Ot: (1) Met The Key Technical Goals Of A Project; (2) Met The Metrics Incorporated Into The Prototype Contract Or Ot; Or (3) Accomplished A Particularly Favorable Or Unexpected Result That Justifies The Transition To A Production Contract Or Ot. Furthermore, Prior To Successful Completion Of A Prototype Project Under This Cso, The Government Can Transition Any Aspect Of The Prototype Project Determined To Provide Utility Into Production While Other Aspects Of The Prototype Project Have Yet To Be Completed. 5.1.3 Follow-on Production Of A Prototype after Award Of A Prototype Using Ot Authority, The Government And Vendor May Negotiate A Follow-on Contract Or Ot For Production Or Solution Integration With Or Without Further Competition. Any Concept/technology/solution Successfully Proven Through A Prototype Ot Can Be Transitioned To A Production Contract. The Government Reserves The Right To Award A Follow-on Contract Or Ot Before The Prototype Is Compete, Under Competitive Procedures As Provided In 10 U.s.c. 4022. any Call Posted By The Government Under This Cso Could Result In The Potential Award Of A Follow-on Production Or Solution Integration Contract Or Ot. the Government Reserves The Right To Extend The Performance To All, Some Or None Of The Selected Solutions And Decisions Will Be Made Based On The Availability Of Government Funds. 5.2 Other Transaction Agreements (otas) Specifics in Accordance With 10 U.s.c. 4022(c), If An Agreement For A Prototype Is Utilized And If That Agreement Provides For Payments In A Total Amount In Excess Of $5m, The Agreement Will Include A Mandatory Clause That Provides For The Comptroller General The Ability To Examine The Records Of Any Party To The Agreement Or Any Entity That Participates In The Performance Of The Agreement. The $5m Amount Includes The Base Agreement Plus Any Options. additionally, To Enter Into An Ot For A Prototype Agreement Under 10 U.s.c. 4022, One Of The Following Conditions Must Be Met: there Is At Least One Nontraditional Defense Contractor Or Nonprofit Research Institution Participating To A Significant Extent In The Prototype Project. all Significant Participants Other Than The Federal Government Are Small Business Concerns Or Nontraditional Defense Contractors. parties To The Transaction Other Than The Federal Government Must Pay At Least One Third Of The Prototype Total Cost. the Senior Procurement Executive Determines That Exceptional Circumstances Justify The Use Of An Ot To Provide An Innovative Business Arrangement Not Feasible Under A Contract Or To Expand The Defense Supply Base In A Manner Not Practical Under A Contract. all Otas Awarded Under This Cso Will Contain Prohibitions On The Use Of Certain Telecommunications Devices In Accordance With Dfars 52.204-25. Further Specifics And Requirements As It Relates To Ots May Be Applicable And Included In Subsequent Calls Published Under This Cso. 6.0 Closed Calls this Cso Will Have Close Calls That Consist Of Either A One-step Or Two-step Process, Which Will Be Specified In Each Individual Call. For A One-step Call, Only Proposals Will Be Solicited. For A Two-step Call, White Papers Will Be Solicited First And Then, Consistent With This Section, Subsequent Requests For Proposals May Follow After The Government Reviews The White Paper. any Part Of This Process May Be Modified Or Altered By Aflcmc In The Calls Or Through An Amendment To This Cso. It Is Important To Note That At No Stage Is Aflcmc Obligated To Make Any Awards And All Awards Are Subject To The Availability Of Funds And Successful Negotiations. The Government Is Not Responsible For Any Monies Expended By Vendors Prior To The Issuance Of Any Contract/agreement Award. 6.1 One-step Closed Call Process 6.1.1 Call Published aflcmc Intends On Publishing A Call Via An Amendment To This Cso. The Call Will Specifically State The Cso Call Type (closed, One-step). This Call Will Provide A Required Date And Time For Submission Of The Proposal. The Call Would Also Detail The Specific Areas Of Interest Being Solicited For, Required Proposal Content, Evaluation Criteria And Detailed Requirements Unique To That Particular Call. 6.1.2 Proposals Received proposals That Are Received On Time Will Be Evaluated Consistent With The Evaluation Criteria Identified Within The Call. After This Technical Review Is Complete, Aflcmc Will Notify Each Prospective Vendor As To Whether Their Proposal Was Selected To Proceed To The Contract Negotiations And Fact-finding Stage. 6.1.3 Contract Negotiations And Fact Finding if A Vendor Is Notified That It Has Been Selected To Proceed To The Next Stage, Then Contract Negotiations And Fact-finding Will Occur. This Includes Contract Formation, Scope, Cost/price And Any Other Terms And Conditions The Contracting/agreements Officer Requires Discussion. It Is Important To Note That At This Stage Aflcmc Is Not Required To Make An Award, Which Is Expressly Contingent Upon Successful Negotiation Of Cost/price, Terms And Conditions And The Availability Of Funds. 6.1.4 Award Decision after Contract Negotiations And Fact-finding Are Complete, Aflcmc Will Render A Decision(s) Whether Or Not To Enter Into A Contract/agreement With The Prospective Vendor. 6.2 Two-step Closed Call Process 6.2.1 Call Published aflcmc Would Publish A Call Via An Amendment To This Cso. The Call Would Specifically State That The Cso Call Type Is A Two-step, Closed Call. This Call Will Provide A Specific State And Time When Prospective Vendors May Submit Their White Papers. The Call Would Also Detail The Specific Areas Of Interest Being Solicited For, Required White Paper Content, Evaluation Criteria And Details Any Other Requirements Unique To That Particular Call. 6.2.2 White Papers Received aflcmc Will Review Submitted White Papers In Accordance With The Evaluation Criteria Specified In The Call. If A Vendor’s White Paper Is Evaluated Favorably By Aflcmc, The Government Will Send Initially Selected Vendors A Request For Proposal (rfp). Invited Vendors Will Proceed To Preparing And Submitting A Proposal For Evaluation. Additional Details Will Be Included Within The Rfp. 6.2.3 Incorporate Sections 6.1.2-6.1.4 after The Submission Of The White Papers And Issuance Of Rfps To Favorably Evaluated White Papers, The Remaining Process Is The Same As The One-step, Closed Call. Therefore, Sections 6.1.2, 6.1.3 And 6.1.4 Are Hereby Incorporated By Reference. 7.0 Open Period Calls this Cso May Have Open Period Calls That Consist Only Of A Two-step Process. For This Call Type, The Process Will Mirror The Process Articulated In 6.2 Above; However, With The Important Distinction That White Papers Will Be Accepted At Any Time During The Stated Time Period On The Call. This Is In Contrast To A Closed Call Where All Proposals Are Required To Be Submitted At A Specific Date And Time Together And Follow A Standard Timeline For All Participants. For Open Period Calls, The Timelines Are Usually Less Structured And Broader In Nature. Typical Turn-around Times That Vendors Can Expect Are Usually Stated In The Call. Aflcmc Reserves The Right To Modify Or Alter Any Of These Instructions In Each Individual Call. 8.0 Evaluation Criteria the Evaluation Criteria For White Papers And Proposals Will Be Explicitly Detailed In Each Individual Call. Solutions Will Be Evaluated On The Basis Of The Merit Of The Proposed Concept In Addressing The Areas Of Interest And Not Against Other Vendor’s Solution Briefs Submitted In Response To The Same Area Of Interest. disclaimer: No Proposals Or White Papers Are Being Requested At This Time. Those Will Be Requested Via Calls Published Under The Cso Solicitation. 9.0 General Proposal Information 9.1 Proposal Content below Is The Typical Structure And Required Volumes For Proposal Submission. Aflcmc Reserves The Right To Alter Or Change The Structure And Required Content For Each Proposal Submission As Specified In A Particular Call. title Page (does Not Count Against Page Limit) Including Company Name, Cage Number (if Applicable), Title, Point Of Contact Name, Date, Email, Address, Phone, Organization/office Symbol (if Applicable). Identify If You Or A Proposed Subcontractor Are A Small Business Such As 8(a), Small, Disadvantaged Business, Woman-owned Business, Hubzoned Small Business, Veteran-owned Business, Service Disabled Veteran Owned Business, Historically Black College Of University And Minority Institution. Identification Of Potential Sponsor(s) Organizations. volume 1: Technical Volume: This Will Typically Contain A Page Limit And Require Specific Technical Details The Government Requires All Prospective Vendors To Address. volume 2: Cost Volume: This Section Is Where Vendors Shall Detail The Proposed Cost By Breaking Down The Overall Proposed Price Into Specific Cost Categories (ex. Direct Labor, Overhead, Direct Materials, Other Direct Costs, Profit). The Government Reserves The Right To Specify A Cost Volume Format In Any Particular Call. 9.2 Proprietary Information information Constituting A Trade Secret, Commercial Or Financial Information, Confidential Personal Information, Or Data Affecting National Security Must Be Clearly Marked. It Shall Be Treated In Confidence To The Extent Permitted By Law. This Restriction Does Not Limit The Government’s Right To Use Information Contained If It Is Obtained From Another Source Without Restriction. Aflcmc Assumes No Liability For Disclosure Or Use Of Unmarked Data And May Use Or Disclose Such Data For Any Purpose. If A Vendor Is Awarded A Contract As A Result Of Or In Connection With The Submission Of Proprietary Data In The Proposal, The Government Shall Have The Right To Duplicate, Use Or Disclose The Data To The Extent Provided In The Resulting Contract/agreement. proposals Containing Data That Is Not To Be Disclosed To The Public For Any Purpose Or Used By The Government Except For Evaluation Purposes Shall Include The Following Sentences In Accordance With Far 52.215-1(e)(1) And (2) On The Cover Page: “this Proposal Includes Data That Shall Not Be Disclosed Outside The Government And Shall Not Be Duplicated, Used, Or Disclosed—in Whole Or In Part – For Any Purpose Other Than To Evaluate This Proposal. If, However, A Contract Is Awarded To This Offeror As A Result Of – Or In Connection With – The Submission Of This Data, The Government Shall Have The Right To Duplicate, Use, Or Disclose The Data To The Extend Provided In The Resulting Contract. This Restriction Does Not Limit The Government’s Right To Use Information Contained In This Data If It Is Obtained From Another Source Without Restriction. The Data Subject To This Restriction Are Contain In Sheets [insert Numbers Or Other Identification Of Sheets].” each Restricted Data Sheet Should Be Marked As Follows: use Or Disclose Of Data Contained On This Sheet Is Subject To The Restriction On The Title Page Of This Proposal. 9.3 Classified Proposals classified Whitepapers/proposals Will Not Be Accepted Under This Cso Unless Otherwise Stated In The Call. If Topics Require Classified Work, The Proposing Vendor Must Have A Facility Clearance In Order To Perform The Work. 9.4 Security security Classification Will Be Determined For Each Call/award. If Classified Data Will Be Accessed Or Generated, A Facility And Storage Clearance, At The Required Classification Level, Will Be Required And The Proposal Will Discuss Appropriate Personnel And Facility Clearances. if A Vendor Has Any Reason To Believe Their Concept May Reference Ideas Or Operations That Require Special Protection, The Vendor Should Immediately Contact The Contracting/agreements Officer For Further Instruction. additionally, If A Dd254 Is Applicable For A Call/award, Vendors Must Verify Their Cognizant Security Office Information Is Current With Defense Security Service (dss). 9.5 Promotional Material promotional And Non-project Related Discussion Is Discouraged, And Additional Information Provided Via Universal Resource Locator (url) Links Or On Computer Disks, Cds, Dvds, Video Tapes Or Any Other Medium Will Not Be Accepted Or Considered In The Proposal Evaluation Unless Otherwise Directed By The Call Or The Contracting/agreements Officer. This Also Means That Unnecessarily Elaborate Brochures Or Proposals Are Not Desired. 9.6 Small Business far-based Contracts Awarded Pursuant To This Cso Shall Include Far 52.219-8, Utilization Of Small Business Concerns (oct 2018). Far-based Contract Awarded Pursuant To This Cso Which Meet Far Subpart 19.7 Criteria For Small Business Subcontracting Plans Shall Include Far 52.219-9, Small Business Subcontracting Plan (march 2020). vendors Shall Address Plans To Comply With These Requirements As Part Of Their Proposals If Seeking Ots Which Provide For Follow-on Non-competitive Production Contracts. Vendors Not Seeking Either Instrument In The Preceding Sentence Shall Clearly State So As Part Of Their Proposal And Shall Address These Requirements As Part Of The Competition For Follow-on Production Contracts. In The Event That Any Follow-up Production Contracts Are Required To Have Small Business Subcontracting Plans And Are Negotiated Using Far 15, Dfars 215.304(c) Small Business Participation Plan Shall Be Required. 9.7 Export-controlled Items depending On The Proposal, It May Be Subject To Export Control (international Traffic In Arms (itar) 22 Cfr 120-131, Or Export Administration Regulations (ear) 15 Cfr 710-774). If The Effort Is Subject To Export Controls, Then A Certified Dd Form 2345, Military Critical Technical Data Agreement, Will Be Required To Be Submitted With Proposals. Dfars 252.225-7048, “export Controlled Item (jun 2013)” Clause Shall Be Contained In All Resulting Contracts. 9.8 Data Rights all Proposal Submissions Shall Include Data Rights Assertions, If Applicable. This Will Be An Essential Element Of Each Proposal Submission. aflcmc Reserves The Right To Negotiate Data Rights As Part Of The Contracting/agreement Process. Additionally, Each Call May Have Specific Data Rights Considerations Associated With It. Should This Be The Case, The Specific Rights Aflcmc Is Requesting Will Be Detailed In Each Call. Aflcmc Also Reserves The Right To Tailor The Data Management Approach For Each Individual Effort Based On The Needs For Each Situation. 9.8.1 Far Part 12 Considerations in Accordance With Dfars 227.7102-1, Aflcmc Seeks To Acquire The Technical Data That Is Customarily Available On A Commercial Basis. As A Result, Dfars Clauses 252.227-7015 And 252.227-7037 Will Be Included On Each Far Part 12 Contract Awarded As A Result Of This Cso Or Any Of Its Calls. If Additional Data Rights Are Considered Warranted, Aflcmc Reserves The Right To Negotiate These With Prospective Vendors As Part Of The Contracting Process. if The Government Pays For Any Portion Of The Development Costs, Dfars 252.227-7013 Will Be Included To Govern The Associated Technical Data For The Portion Of The Commercial Items That Was Developed Using Government Funds. For The Portion Of Commercial Items That Was Developed Exclusively At Private Expense, Dfars 252.227-7015 Will Still Govern The Technical Data To The Extent Is Commercial. companies Whose Effort Originated Under The Sbir Program Will Maintain Standard Sbir Data Rights In Accordance With Dfars 252.227-7018 (class Deviation 2020-o0007). additional Clauses May Be Applicable Depending On The Technology And Requirements Associated With It. 10.0 Other Information 10.1 Unique Item Identification for Hardware Deliverables, Item Unique Identification In Accordance With Dfars 252.211-7003 May Be Required. Vendors May Contact The Contracting/agreements Officer For Additional Information. 10.2 Foreign-owned Businesses foreign-owned Businesses May Independently Submit A Solution Or Do So As Part Of A Teaming Agreement With One Or More United States-owned Businesses. However, The Ability To Obtain A Contract/agreement Based Upon A Submission May Depend Upon The Ability For The Foreign-owned Business To Obtain Necessary Clearances And Approvals To Obtain Prescribed Information. 10.3 Within Scope Modifications potential Vendors Are Advised That Awards Resulting From The Calls Under This Cso May Be Modified During The Performance To Make Within Scope Changes. Only A Contracting/agreements Officer Can Legally Bind A Contract/agreement Modification On Behalf Of The United States Government. 10.4 Non-government Advisors And Source Selection Information non-government Advisors May Participate In The Evaluation Of All Submissions And Shall Have A Signed Non-disclosure Agreement (nda) With The Government. Non-governmental Advisors May Also Serve In Administrative And Assistance Support Capacities. The Government Understands That Information Provided In Response To This Cso Is Presented In Confidence And May Contain Trade Secrets Or Commercial Or Financial Information, And It Agrees To Protect Such Information From Unauthorized Disclosure To The Maximum Extent Permitted Or Required By Law. aflcmc Will Treat All Submissions To Calls Published Against This Cso As Source Selection Information. During The Evaluation Process, Submissions May Be Handled By Non-government Advisors For Administrative Purposes And/or Technical Evaluations. All Government Support Contractors Are Bound By Appropriate Ndas. Submissions Will Not Be Returned Unless Otherwise Stated In The Call. 10.5 Multiple White Paper/proposal Submissions vendors May Submit Multiple Submissions In Response To Any Single Area Of Interest Detailed In Each Call If Each Submission Represents A Separate And Distinct Concept. However, For Each Individual Submission, Prospective Vendors May Only Address One Distinct Technical Solution Per Submission Unless Otherwise Permitted In The Individual Call. 10.6 Fraud And False Statements knowingly And Willfully Making False, Fictitious, Or Fraudulent Statements Or Representations May Be A Felony Under The Federal Criminal False Statement Act (18 U.s.c. 1001) Punishable By A Fine Or Up To $10,000, Up To Five Years In Prison, Or Both. 10.7 Duns And Sam Registration vendors Must Have A Unique Entity Identifier (uei) And Must Register In The System For Award Management (sam) Prior To Receiving An Award Or Agreement. Vendors Must Not Be Suspended Or Debarred From Award By The Federal Government Nor Be Prohibited By Presidential Executive Order And/or Law From Receiving An Award. 10.8 Wawf Registration as Specified In A Particular Call, Vendors May Be Required To Be Registered In The Prescribed Government Invoicing System (wide Area Work Flow). If Not Specified, The Call Will Explain How Invoicing Will Be Handled. 10.9 Supplier Performance Risk System (sprs) in Order To Receive A Dod Contract, Every Vendor Will Be Required To Perform A Basis Nist Sp 800-171 Dod Assessment. That Process Is Described Here. once The Basic Nist 800-171 Dod Assessment Is Complete, Each Contractor Will Need To Follow The Instructions Here To Enter The Results In Sprp On The Piee Website. 10.10 Cost Sharing Or Matching cost Sharing Or Matching Will Be Considered Based On The Solutions Proposed And Details Associated With Each Call. Aflcmc Has Final Decision Authority On Whether To Enter Into A Cost Sharing Or Matching Agreement.

Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through Gen Fund-20% / Dev. Fund, Intend To Apply The Sum Of P 3,864,056.67 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Repair / Renovation Of Tourism Building (bahay Salakot), Buhanginan Hills, Brgy. Pala-o, Iligan City With Project No. Cb(b)-24-139 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Repair / Renovation Of Tourism Building (bahay Salakot), Buhanginan Hills, Brgy. Pala-o, Iligan City General Requirements •installation Of Project Billboard •occupational Safety And Health Program •mobilization And Demobilization •provision Of Field Office For The Engineer - Standard Engineer Field Camp, Office Table And Chair - Computer For Field Engineer Removal Of Structures And Obstruction •demolition Of Concrete Slab For Excavation Of Septic Tank •demolition Of Existing Chs Walls At Main Office (for W-04 •demolition Of Existing Drywall Partitions At Office •chipping Of Existing Toilet Tiles •removal Of Existing Windows And Doors •dismantling Of Existing Plumbing Appliances And Fixtures •demolition Of Kitchen Counter At Basement Earthworks •excavation Work For Septic Tank •gravel Bedding For Septic Tank •backfilling Of Common Soil Using Excavated Soil Must Be Compacted Layer By Layer Concrete Work, Formwork & Scaffolding •septic Tank •kitchen Sink Countertop Masonry Works •4” Reinforced Chs Wall @ Main Office •4” Reinforced Chs Wall @ Main Office Cr •4” Reinforced Chs Wall @ Basement Cr •4” Reinforced Chs Wall For Septic Tank Plastering Works •plaster-topping @ Priv. Rm & Printing Rm. •plaster Chs Wall On Both Sides @ Main Office •plaster Chs Wall On Both Sides @ Main Office Cr •plaster Chs Wall On Both Sides @ Basement Cr •plaster Chs Wall On One Side For Septic Tank Steel Reinforcements •10mm Dia. Rebars For Septic Tank's Masonry & Concrete Works •10mm Dia. Rebars For Additional Chs Walls Architectural Works •installation Of Wallpaper In Antique Gray Brick For Accent Wall •installation Of Solihiya Screen In Wood Framing •fabrication Of “viva Turismo Lligan” Acrylic Logo •installation Of Skirting Board/ Based Board Painting Works •semi-gloss Interior Paint Finish •flat Latex Paint- Primer For Ceiling Board •flat Latex Paint- Off-white Ceiling Finish @ Office •semi-gloss Paint- Off-white Ceiling Finish @ Both Toilet Ceiling Works •6mm Gypsum Board On Double Furring Framing @ 2nf Floor And Basement Toilet •9mm Gypsum Board On Double Furring Framing @ Main Office Built-ins And Cabinets •fabricate 1.475m X 2.4m- 3 Layers Shelves With 2 Door Cabinet And Drawers •fabricate 1.25m X 2.675m Overhead Shelf •fabricate 0.4 X 0.4 X 2.65m Ficem Board Plant Box •fabricate 0.5m X 0.5m X 1.2m Lavatory Counter Cabinet With Ceramic Tile Countertop •fabricate 1.45m X 1.05m 2 Layer Overhead Document Shelf Fabricate 0.6m X 1.45m Built-in Table Waterproofing •cementitious Waterproofing @ Toilet- Walls (5.13 Sqm) •cementitious Waterproofing @ Toilet- Flooring (5.42 Sqm) Tile Works •detachable Green Carpet (8.15 Sqm) •30cm X 60cm Non-slip Floor Tiles @ 2f Toilet •60cm X 60cm Non-slip Floor Tiles @ Basement Toilet •parquet Tiles- For The Demolished Walls •60cm X 60cm Dark Gray Carpet Tiles •300mm X 300mm Ceramic Wall Tiles @ 2f Toilet •200mm X 600mm Ceramic Wall Tiles @ Basement Toilet Electrical Works •installation Of Conduits , Junction Box , Utility Box •installation Of New Electrical Wire , Switches , Aircon Outlet •lnstallation Of Lighting Fixture According The Electrical Plan . Wood Balustrades And Handrail •top Railing: 75x25mm Solid Wood In Wood Stained Finish •balusters: 75x75mm Solid Wood In Wood Stained Finish Plumbing Works •installation Of Pvc Pipes ( Soil And Waste ) And G.i. Pipes For Water •installation Of Water Closets, Lavatory And Faucets •installation Of Kitchen Sink At Pantry Doors And Windows •remove And Replace Existing Doors, See Plan For Details •remove And Replace Existing Windows, See Plan For Details I.general Requirements A . Project Billboard (q = 1.00 Lot) Includes 4' X 8' Tarpaulin, 8' X 8' Tarpaulin, 2"x3"x 14" Coco Lumber, 2"x3"x10" Coco Lumber, 2"x2"x8" Coco Lumber, Assorted Sizes C.w. Nails. B. Occupational Safety And Health Program (q = 1.00 Lot) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe. C.mobilization / Demobilization (q = 1.00 Lot) D. Facilities For The Engineer (q = 1.00 Lot) Includes Field Office For The Field Engineer: 4" X 4" Cocolumber, 2" X 4" Cocolumber, 2" X 3" Cocolumber, 2" X 2" Cocolumber, 1/4" Thk. Ord. Plywood, Ga 300 X 10' Corr.g.i. Sheet, Portland Cement, Washed Sand, Washed Gravel,4" Chb 700 Psi, 10mm Dsb, No. 16 G.i. Tie Wire, Assorted Sizes C.w. Nails, Empty Drum/ Fixtures, Monobloc Chairs, Office Table. Ii.removal Of Structures And Obstruction (q = 1.00 Lot) Includes Demolition Of Existing Chb Walls At Main Office (for W-04), Demolition Of Existing Drywall Partitions At Office, Chipping Of Existing Toilet Tiles, Removal Of Existing Windows And Doors, Dismantling Of Existing Plumbing Appliances And Fixtures, Demolition Of Kitchen Counter At Basement. Iii. Earthworks (q = 7.56 Cu.m.) Includes Excavation Works For Additional Septic Tank, Washed Gravel. Iv.concrete Works And Formworks (q = 2.02 Cu.m.) Includes Portland Cement, Washed Sand, Washed Gravel, Marine Plywood 12mm Thk. X 4' X 8', 2" X 3" X 8' Coco Lumber, 2" X 2" X 8' Coco Lumber, Assorted Sizes C.w. Nails. V.masonry Works (q = 48.54 Sq.m) Includes 4" Chb 350psi, Portland Cement, Washed Sand. Vi.plastering Works (q = 82.80 Sq.m) Includes Portland Cement, Washed Sand. Vii. Steel Reinforcements (q = 1.00 Lot) Includes 10mm Dia X 6m Rebar, No. 16 G.i. Tie Wire. Viii. Wood Balustrades And Handrail (q = 1.00 Lot) Includes Top Railing: 75x25mm Solid Wood In Wood Stained Finish, Balusters: 75x75mm Solid Wood In Wood Stained Finish, Paint Varnish, Paint Brush 2-1/2",assorted Sizes C.w. Nails. Ix.doors And Windows (q = 1.00 Lot) Includes D1- 3.2m X2.8m Brown Powder Coated Aluminum Framing W/ 10mm Clear Fixed Glass And Sliding Door With Complete Accessories; D2- 3.35m X2.55m Brown Powder Coated Aluminum Framing W/ 10mm Clear Fixed Glass And Sliding Door With Complete Accessories; D3- 0.7m X 2.1m Hollow Pvc Door With Door Jamb And Complete Accessories; D4- 0.8m X 2.1m Hollow Core Hdf Door With Door Jamb And Complete Accessories; D5- 0.7m X 2.4m Pocket Door: Solid Wood Door With 2mm X 5mm Grooves And Complete Accessories; D6- 0.7m X 2.1m Hollow Pvc Door With Door Jamb And Complete Accessories; W1- 2.345 X 1.2m Sliding Glass Window W/ Wooden Louver Casement Window: Sliding Window : 1x1" Brown Powder Coated Aluminum Frame, 2x2" Aluminum Mullions, 0.5x0.5" Aluminum Window Grilles, 6mm Clear Tempered Glass; Window Shutters: 4-panel Wooden Louvered Window Shutters, 2x2" Wood Framing; W2- 1.2m X 0.6m Black Powder Coated Aluminum Frame W/ 10mm Clear Glass Awning Window; W3- 0.7m X 2.1m Brown Powder Coated Aluminum Frame W/ 10mm Clear Glass Fixed Window; W4- 2.32m X 0.5m Louver Window : Brown Powder Coated Aluminum Frame W/ 5mm Clear Glass Blades; W5- 0.6m X 0.5m Black Powder Coated Aluminum Frame W/ 10mm Clear Glass Awning Window; W6- 4.7m X 1.27m Sliding Glass Window Casement Window X " Brown Powder Coated Aluminum Frame, 2x2" Aluminum Mullions, 0.5x0.5" Aluminum Window Grilles, 6mm Clear Tempered Glass; W7- 0.845m X 1.27m Fixed Glass Window Casement Window Sliding Window: 1x1" Brown Powder Coated Aluminum Frame, 2x2" Aluminum Mullions, 0.5x0.5" Aluminum Window Grilles, 6mm Clear Tempered Glass X.architectural Works (q = 1.00 Lot) Includes Wallpaper In Antique Gray Brick 15cm X 60cm, Wood Glue, M X 2.8m Solihiya Screen Partition In 2"x2" Wood Framing, M X 2.8m Solihiya Screen Partition In 2"x2" Wood Framing, 4.4m X 0.4m Solihiya Screen Partition In 2"xl" Wood Framing, "viva Turismo Ligan" Acylic Logo, Skirting Board/ Based Boardlin. X 4in. X8ft. Xi.painting Works (q = 209.8225 Sq.m) Includes Permacoat Flat Latex, Masonry Putty, Paint Brush 2-1/ 2 ",brush Roller (152mm), Sand Paper, Assorted Sizes, Tape Fiberglass Mesh (48mm X 30m), Gypsum Putty (5kg/gal), 2" X 3" X 8' Coco Lumber, 2" X 2" X 8' Coco Lumber, Assorted Sizes C.w. Nails. Xii.ceiling Works (q = 90.41 Sq.m) Includes 6mm Thick Gypsum Board 4'x8'; 9mm Thick Gypsum Board 4'x8'; Double Furring, 0.50mm Thk. X 19 X 50 X 19 X 5.00m; Channel Clip; Wall Angle 25 X 25 X 0.4 Mm (3m); Blind Rivets, 1000pcs/box; Riveter. Xiii.built-ins And Cabinets (q = 1.00 Lot) Includes 1.475m X 2.4m- 3 Layers Shelves With 2 Door Cabinet And Drawers, 1.25m X 2.675m Overhead Shelf, 0.4 X 0.4 X 2.65m Ficem Board Plant Box, 0.5m X 0.5m X 1.2m Lavatory Counter Cabinet With Ceramic Tile Countertop, 1.45m X 1.05m 2 Layer Overhead Document Shelf, 0.6m X 1.45m Built-in Table. Xiv.waterproofing (q = 10.55 Sq.m) Includes Portland Cement, Washed Sand, Wire Mesh 3.5mm X 1x1" X 6x20ft, Waterproofing Membrane (4 Kg). Xv.tile Works ( Q = 65.69 Sq.m) Includes Detachable Green Carpet, 300mm X 600mm Ceramic Floor Tiles (non-skid) @ 2f Toilet, 300mm X 300mm Ceramic Wall Tiles @ 2f Toilet, 600mm X 600mm Ceramic Floor Tiles (non-skid) @ Basement Toilet, 200mm X 600mm Ceramic Wall Tiles @ Basement Toilet, Tile Grout (2kg), Tile Adhessive 25kg (heavy Duty), Portland Cement, Washed Sand, Diamond Cutter Wheel, Parquet Tiles- For The Demolished Walls, 0.6m X 2.05m Kitchen Counter In Synthetic Marble Countertop Finish, 60cm X 60cm Dark Gray Carpet Tiles. Xvi.electrical Works ( Q = 1.00 Lot) Includes Electric Wire ,3.5mm2 Thhn Stranded Copper Wire; Electric Wire, 8.0mm2 Thhn Stranded Copper Wire; Electric Wire , 38.0mm2 Thhn Stranded Copper Wire; Switch , 1gang Switch W/led Set 10a 220v; Switch , 2 Gang Switch W/led Set 10a 220v; Switch , 3 Gang Switch W/led Set 10a 220v; Led Downllight 15w; Led Downlight 7w; 10w Rectangular Led Pendant Light Warm Light 1 X 4'; 3w Wall Mounted Led Light Daylight; Duplex Convenience Outlet; Gfci 20a 2 Gang Gfci Safety Outlet; Electrical Tape 3/4" X20yds; Solvent Cement 100cc; Pvc Conduit,15mm X3 Meters; Pvc Conduit Coupling (15mm)dia.; Pvc 90deg Elbow (15mm); Pvc Clamp (15mm) 100pc/pack; Junction Box, Pvc Octagonal W/ Cover 2"x4" Depth Type; Utility Box 2"x3" Depth Type W/ Cover; Circuit Breaker, 15at/50 Af, 2pcb, 230vac Bolt-on Type; Circuit Breaker 20at/50af, 2pcb, 230vac Bolt On Type; Circuit Breaker Soat/soaf, 2pcb, 230vac Bolt On Type; Circuit Breaker 125at/50af, 2pcb, 230vac Bolt On Type Tqd; Panelboard 8 Branches Bolt On Type 2 Pole With Tqd Main Breaker; Enclosure For Main Circuit Breaker 125at Tqd; Service Entrance Cap 25mm Dia. Emt; Emt Clamp (25mm); Tox With Screw Size 10; Emt Connector Set Screw Type 25mm; Emt Elbow 25mm; Cable Tie Black Nylon 100pc/pack; Secondary Rack 2 Pole Insulator; Grounding Rod 5/8" X4.75 Ft. With Clamp. Xvii . Plumbing Works ( Q = 1.00 Lot) Includes Two-piece Water Closet Close Coupled; Wall Hung Lavatory 450x400x140mm; Vessel Type Lavatory 450x400x140mm; Stainless Steel Sink 86x50cm , Heavy Duty; Bidet Spray, Hose & Hook Set Abs Material Chrome Plated 1.2m Hose Length, Heavy Duty;tissue Holder, Heavy Duty; Faucet Lavatory, Heavy Duty; Faucet Kitchen, Heavy Duty; Wall Faucet, Heavy Duty; Floor Strainer 100x150x2.7mm; 7.5 Pm Grease Trap And Accessories; Vanity Mirror For 2nd Floor Toilet; 4" Dia. Pvc Wye; 4" Dia. Pvc Clean Out; 4" Dia. Pvc Elbow, 1/8 Bend; 4" Dia. X 10' Pvc Pipe, S-1000; 2" Dia. Pvc P-trap; 2" Dia. Pvc Wye; 2" Dia. Pvc Tee; 2" Dia. Pvc Clean Out; 2" Dia. Pvc Elbow, 1/8 Bend; 2" Dia. X 10' Pvc Pipe, S-1000; 3 Way Angle Valve; Pvc Cement, 400cc; 1" Dia. G.i. Elbow; 1" Dia. G.i. Tee; " Dia. G.i. Coupling; 1" Dia. G.i. Caps, Banded; 1" Dia. X 20' G.i. Pipe; Teflon Tape (big). Approved Budget For The Contract (abc): P 3,864,056.67 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred (100) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1. Issuance Of Bid Documents: November 19 – December 10, 2024 – 8:00 A.m. At Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. 2. Pre-bid Conference: November 26, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 3. Submission Of Bids: December 10, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4. Opening Of Bids: December 10, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: November 19, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-139 (ceo-infra)

Details: Description Bids And Awards Committee Iloilo Provincial Government Procurement Of Ict Equipment Bid No. Agr-24-1583-b (rebid) Philippine Bidding Documents Sixth Edition July 2020 Table Of Contents Section I. Invitation To Bid 3 Section Ii. Instructions To Bidders 5 1. Scope Of Bid 5 2. Funding Information 5 3. Bidding Requirements 5 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 5 5. Eligible Bidders 5 6. Origin Of Goods 6 7. Subcontracts 7 8. Pre-bid Conference 7 9. Clarification And Amendment Of Bidding Documents 7 10. Documents Comprising The Bid: Eligibility And Technical Components 7 11. Documents Comprising The Bid: Financial Component 7 12. Bid Prices 8 13. Bid And Payment Currencies 8 14. Bid Security 8 15. Sealing And Marking Of Bids 9 16. Deadline For Submission Of Bids 9 17. Opening And Preliminary Examination Of Bids 9 18. Domestic Preference 9 19. Detailed Evaluation And Comparison Of Bids 9 20. Post-qualification 10 21. Signing Of The Contract 10 Section Iii. Bid Data Sheet 11 Section Iv. General Conditions Of Contract 12 1. Scope Of Contract 12 2. Advance Payment And Terms Of Payment 12 3. Performance Security 12 4. Inspection And Tests 12 5. Warranty 13 6. Liability Of The Supplier 13 Section V. Special Conditions Of Contract 14 Section Vi. Schedule Of Requirements 16 Section Vii. Technical Specifications 17 Section Viii. Checklist Of Technical And Financial Documents 18 Section I. Invitation To Bid Purchase Of Ict Equipment Bid No. Agr-24-1583-b (rebid) 1. The Iloilo Provincial Government Through The General Fund 2024 Intends To Apply The Sum Of Seventy-one Thousand Five Hundred Nineteen Pesos (php 71,519.00) Being The Abc To Payments Under The Contract For The Purchase Of Ict Equipment. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 14 Days Upon Receipt Of The Notice To Proceed (ntp). Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat Of The Iloilo Provincial Government And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00 P.m. 90 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 15, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (php 500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Iloilo Provincial Government Will Hold A Pre-bid Conference On N/a At 9:00 A.m. At The N/a And/or Through Video Conferencing Or Webcasting, Upon Request At Least Three (3) Days Before The Pre-bid Conference, Via Zoom Or Other Videoconferencing Portals, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The 5th Floor, Bac Secretariat Office, Iloilo Provincial Capitol, Iloilo City On Or Before November 25, 2024 At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On November 25, 2024 At 9:01 A.m.at The 5th Floor, Bac Secretariat Office, Iloilo Provincial Capitol, Iloilo City Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. A. The Participating Bidder/supplier Or Its Authorized Representative Must Indicate In Any Of The Eligibility Documents, An Email Address Or A Working Fax Number. The Absence Of Which Shall Be A Ground For Disqualification. Notice To The Bidder/supplier Through The Use Of Either Of These Means (email/fax) Is Considered Sufficient Notice. The Date Of Filing Of Reconsideration And All Communications With The Bac Shall Be Its (bac) Date Of Receipt. B. The Bidder(s)/awardee(s) Or Its Authorized Representative Must Conform To The Notice Of Award Within Three (3) Calendar Days From Receipt Of Such Notice And The Winning Bidder Shall Post The Required Performance Security And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award In Accordance With Section 37.2.1 Of The Revised Irr Of R.a. No. 9184. C. The Bidder/supplier Must Have No Pending Unaccepted Notice To Proceed Three (3) Days From The Date Of Acceptance And Signing Of The Purchase Order. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. D. The Bidder/supplier Must Have No Notice Of Award Pending Its Conformity Three (3) Days From The Date Of Its Receipt Of The Notice Of Award. Otherwise, It Shall Be Aground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. E. The Bidder/supplier Shall Submit A List Of All Its Ongoing And Completed Projects With The Iloilo Provincial Government Indicating The Delivery Periods And Accomplishments Of Such Projects. F. The Bidder/supplier At The Time Of The Bidding Must Have No Pending Unposted Performance Or Warranty Security, As The Case May Be, Beyond The Period Allowed In The Notice Of Award. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. 11. The Iloilo Provincial Government Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Bac Secretariat Head 5th Floor, Bids And Awards Committee Iloilo Provincial Capitol Email Address: Ipg_bacs@yahoo.com Website: Iloilo.gov.ph Telephone Number: (033) 336-0736 13. You May Visit The Following Websites For Downloading Of Bidding Documents: Ipg.gov.ph And/or Philgeps.com November 7, 2024 Atty. Dennis T. Ventilacion Chairman, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Iloilo Provincial Government Wishes To Receive Bids For The Purchase Of Ict Equipment With Bid No. Agr-24-1583-b (rebid) . The Procurement Project (referred To Herein As “project”) Is Composed Of Two (2) Items, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2024 In The Amount / 2.2. The Source Of Funding Is: Lgus, The Annual Or Supplemental Budget, As Approved By The Sanggunian. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. B. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. C. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: [select Either Failure Or Monopoly Of Bidding Based On Market Research Conducted] I. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And Ii. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time At Its Physical Address As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Complete Bid - One Project Having Several Items That Shall Be Awarded As One Contract In Case Of Complete Bid. Line Bidding/partial Bidding - One Project Having Several Items, Which Shall Be Awarded As Separate Contracts Per Item 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Refers To The Contracts To Be Bid Or The Object Of The Contract; B. Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed. 12 The Price Of The Goods Shall Be Quoted Ddp Nisu, Concepcion, Iloilo Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Five Percent (5%) Of Abc, If Bid Security Is In Surety Bond. 15 Bidders Shall Prepare An Original Of The First (eligibility And Technical) And Second (financial) Envelopes. In Addition, Bidders Shall Submit Separate Copies Of The First And Second Envelopes (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. 19.3 No Further Instructions. 20.2 For The Procurement Of Drugs And Medicines And Medical Equipment/supplies, The Bidder Shall Submit The Following: A. Certificate Of Product Registration From Food And Drug Administration (fda) For Easy Validation During The Post-qualification; B. Certificate If Good Manufacturing Practice From Fda, For Easy Validation During The Post-qualification; C. Batch Release Certificate From Fda, For Easy Validation During The Post-qualification; D. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/ Dealer Of The Products / Items For Easy Validation During The Post-qualification; E. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license: S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer); F. License To Operate (lto) Issued By Fda, If Applicable; G. After-sales Services/parts, If Applicable; H. Manpower Requirements, If Applicable. 21.2 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Iv (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 6.1. In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 6.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines, State:] “the Delivery Terms Applicable To This Contract Are Delivered To The Nisu, Concepcion, Iloilo-. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The Authorized Employee/official Of The Iloilo Provincial Government. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. 2.2 Partial Payment Is Not Allowed. 4 The Inspections And Tests That Will Be Conducted Are Through Physical Inspection. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Desktop Computer 1 1 2 Underwater Camera 1 1 ___________________________________ Signature Over Printed Name Section Vii. Technical Specifications Bid No.: Agr-24-1583-b Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1. Desktop Computer *processor: 12mb Smart Cache, 4-cores, 8-threads; 3.30ghz Or Better Performance Base Frequency *motherboard: H610 Motherboard With 6 + 1 + 1 Hybrid Phases Or Better Digital Vrm Design, Pcle 4.0 Design, Gen 3 X 4 M.2, Anti-sulfur Resistor, Smart Fan6 Or Better *ram: 8gb Od Ddr4 With 2133ghz Or Higher *graphics: Hd Graphics That Support 4096 × 2160 @ 60hz Hdmi Or Better *case: Micro Atx Case With 700w Power Supply *ups: 650va/360 Watts Or Better *accessories: Usb Keyboard/mouse/mouse Pad/speaker 2. Underwater Camera *gp2 Processor Or Better *image Sensor: 1/1.9" Cmos, 27.6mp Or Better *front Display Size: 1.4" Color Lcd, Min. *rear Display: 2.27" Touch Lcd, Min. *with Waterproof Case And Memory Card Terms And Conditions 1. All Items Must Be Delivered At Nisu, Concepcion, Iloilo 2. All Items Must Be Delivered Within 14 Days Upon Receipt Of Notice To Proceed (ntp) 3. All Items Must Have A Warranty Period For Atleast 1 Year 4. All Items Must Be Delivered At Their Best Quality And Condition 5. Winning Bidder Must Coordinate With Provincial Agriculture Office, Fisheries Division Prior To The Delivery Of Items Listed Above ___________________________________ Signature Over Printed Name Section Viii. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages);or ⬜ (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document, And ⬜ (c) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And ⬜ (d) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (i) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (j) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (k) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc); Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (l) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (m) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (n) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (o) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (p) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.   Bid Form Date: _____________________ Bid No.: ___________________ To: Bids And Awards Committee Iloilo Provincial Government Iloilo Provincial Capitol Bonifacio Drive, Iloilo City Having Examined The Philippine Bidding Documents (pbds) Including The Supplemental Or Bid Bulletin Numbers __________, The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To Supply/deliver/perform _________________________________________ [description Of The Goods] In Conformity With The Said Pbds For The Sum Of _______________________________________, (php _______________________) [total Bid Amount In Words And Figures] Or The Total Calculated Bid Price, As Evaluated And Corrected For Computational Errors, And Other Bid Modifications In Accordance With The Price Schedules Attached Herewith And Made Part Of This Bid. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To: Value Added Tax (vat), Income Tax, Local Taxes, And Other Fiscal Levies And Duties, As Applicable, Which Are Itemized Herein Or In The Price Schedules, If Our Bid Is Accepted, We Undertake: A. To Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements Of The Philippine Bidding Documents (pbds); B. To Provide A Performance Security In The Form, Amounts, And Within The Times Prescribed In The Pbds; C. To Abide By The Bid Validity Period Specified In The Pbds And It Shall Remain Binding Upon Us At Any Time Before The Expiration Of That Period. Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/confirm That We Comply With The Eligibility Requirements Pursuant To The Pbds. The Undersigned Is Authorized To Submit The Bid On Behalf Of ____________________________________________________ As Evidenced By The Attached [name Of The Bidder] ______________________________________. [state The Written Authority]. We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Including The Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Name: Legal Capacity: Signature: Duly Authorized To Sign The Bid For And Behalf Of: Date: Republic Of The Philippines) City Of ____________________) S.s. Bid Securing Declaration Bid No.: ___________________________ To: Bids And Awards Committee Iloilo Provincial Government Iloilo Provincial Capitol Bonifacio Drive, Iloilo City I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid Securing Declaration. 2. I/we Accept That: (a) I/we Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of Two (2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen (15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1, Except 69.1(f),of The Irr Of Ra No. 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid Securing Declaration Shall Cease To Be Valid On The Following Circumstances: A. Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; B. I Am/we Are Declared Ineligible Or Post-disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; And C. I Am/we Are Declared The Bidder With The Lowest Calculated Responsive Bid, And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ______ __ At ___________________________. _________________________________________________ [signature Over Printed Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Subscribed And Sworn To Before Me, _______________________ In The _____________________. Affiant Exhibited To Me His Valid Identification Card With Id No. _________________ Issued By: ___________________. Doc No.:______; Page No. _____; Book No.:_____; Series Of: _____; Republic Of The Philippines) City Of _____________________) S.s. Omnibus Sworn Statement (for Sole Proprietorship) I, _______________________________________of Legal Age, Single/married/widow, Filipino, And Residing At ________________________________________, Philippines, After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. I Am The Sole Proprietor Or Authorized Representative Of ______________________________________ With Office Address At ______________________________________; 2. As The Owner And Sole Proprietor, Or Authorized Representative Of _____________________________________, I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For ___________________________________________ [name Of The Project] Of The Iloilo Provincial Government, As Shown In The Attached Duly Notarized Special Power Of Attorney; 3. __________________________________________ Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. __________________________________________ Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. ___________________________________________ Complies With Existing Labor Laws And Standards; And 8. ___________________________________________ Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The ______________________________________. [name Of The Project] 9. _________________________________________ Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ______ __ At ___________________________. ________________________________________________ [signature Over Printed Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Subscribed And Sworn To Before Me, _______________________ In The _____________________. Affiant Exhibited To Me His Valid Identification Card With Id No. _________________ Issued By: ___________________. Doc No.:______; Page No. _____; Book No.:_____; Series Of: _____; Republic Of The Philippines) City Of ____________________) S.s. Omnibus Sworn Statement (for A Partnership Or Cooperative) I, _______________________________________of Legal Age, Single/married/widow, Filipino, And Residing At ________________________________________, Philippines, After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. I Am The Duly Authorized And Designated Representative Of ______________________________ With Office Address At ___________________________________; 2. I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For __________________________________ Of The Iloilo Provincial Government, As Shown [name Of The Project] In The Attached _________________________________________________; [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;] 3. _____________________________________ Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. _____________________________________ Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. None Of The Officers And Members Of _____________________________________ Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. _____________________________________ Complies With Existing Labor Laws And Standards; And 8. _____________________________________ Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The ______________________________________. [name Of The Project] 9. _____________________________________ Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ______ __ At ___________________________. _________________________________________________ [signature Over Printed Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Subscribed And Sworn To Before Me, _______________________ In The _____________________. Affiant Exhibited To Me His Valid Identification Card With Id No. _________________ Issued By: ___________________. Doc No.:______; Page No. _____; Book No.:_____; Series Of: _____; Republic Of The Philippines) City Of _____________________) S.s. Omnibus Sworn Statement (for A Corporation Or Joint Venture) I, _______________________________________of Legal Age, Single/married/widow, Filipino, And Residing At ________________________________________, Philippines, After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. I Am The Duly Authorized And Designated Representative Of ______________________________ With Office Address At ___________________________________; 2. I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For __________________________________ Of The Iloilo Provincial Government, As Shown [name Of The Project] In The Attached _________________________________________________; [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;] 3. _____________________________________ Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. _____________________________________ Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. None Of The Officers, Directors, And Controlling Stockholders Of _____________________________________is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. _____________________________________ Complies With Existing Labor Laws And Standards; And 8. _____________________________________ Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: E. Carefully Examining All Of The Bidding Documents; F. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; G. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And H. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The ______________________________________. [name Of The Project] 9. _____________________________________ Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ______ __ At ___________________________. ________________________________________________ [signature Over Printed Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Subscribed And Sworn To Before Me, _______________________ In The _____________________. Affiant Exhibited To Me His Valid Identification Card With Id No. _________________ Issued By: ___________________. Doc No.:______; Page No. _____; Book No.:_____; Series Of: _____; Republic Of The Philippines) City Of ____________________) S.s. Performance Securing Declaration Bid No: ____________________ To: Bids And Awards Committee Iloilo Provincial Government Iloilo Provincial Capitol Bonifacio Drive, Iloilo City I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, To Guarantee The Faithful Performance By The Supplier/distributor/manufacturer/contractor/consultant Of Its Obligations Under The Contract, I/we Shall Submit A Performance Securing Declaration Within A Maximum Period Of Ten (10) Calendar Days From The Receipt Of The Notice Of Award Prior To The Signing Of The Contract. 2. I/we Accept That: I/we Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of One (1) Year For The First Offense, Or Two (2) Years For The Second Offense, Upon Receipt Of Your Blacklisting Order If I/we Have Violated My/our Obligations Under The Contract; 3. I/we Understand That This Performance Securing Declaration Shall Cease To Be Valid Upon: A. Issuance By The Procuring Entity Of The Certificate Of Final Acceptance, Subject To The Following Conditions: I. Procuring Entity Has No Claims Filed Against The Contract Awardee; Ii. It Has No Claims For Labor And Materials Filed Against The Contractor; And Iii. Other Terms Of The Contract; Or B. Replacement By The Winning Bidder Of The Submitted Psd With A Performance Security In Any Of The Prescribed Forms Under Section 39.2 Of The 2016 Revised Irr Of Ra No. 9184 As Required By The End-user. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ______ __ At ___________________________. _________________________________________________ [signature Over Printed Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Subscribed And Sworn To Before Me, _______________________ In The _____________________. Affiant Exhibited To Me His Valid Identification Card With Id No. _________________ Issued By: ___________________. Doc No.:______; Page No. _____; Book No.:_____; Series Of: _____; Email Address: ______________________________________ Statement Of Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid Bidder’s Name: Email Address: Bidder’s Address: Fax Number: Tel. Number: Name Of Project Amount Of Contract Date Of Contract Effectivity Owner’s Name And Address Delivery Period Date Of Delivery Date Of Acceptance Signature Over Printed Name Attachments: 1. Purchase Order (po) 2. Acceptance And Inspection Report (air) Statement Of All On-going Government And Private Contracts (including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid) Bidder’s Name: Email Address: Bidder’s Address: Fax Number: Tel. Number: Name Of Project/s Amount Of Contract Date Of Contract Effectivity Owner’s Names And Address Delivery Period (indicate All Delivery Periods If Staggered Delivery Allowed) End Of Delivery Period Value Of Outstanding Contracts (indicate If Partial Delivery Allowed) No. Of Days From End Of Delivery Period Days Of Approved Extension/ Suspension, If Any Total Value Of Outstanding Contracts (php) Signature Over Printed Name Fill Up All The Columns Accordingly Disclaimer: Non-disclosure Of All On-going Contracts And Details Thereof Is Grounds For Ineligibility And Disqualification.

Details: The purpose of the contract is the design and execution of renovation work on the Stiff Radar Tower in Ouessant (29). The Stiff Radar Tower is an emblematic building of the Breton coastline put into service in 1982 following the sinking of the oil tanker "amoco Cadiz" in 1978. Its objective is to strengthen the ship surveillance system in the Ouessant rail. The Tower is made up of: - A circular ground floor housing housing and technical premises. - A prestressed concrete barrel 72m high with a diameter of 6m, at the top of which the 2 radar antennas (main and secondary) are fixed. This barrel rests on a concrete base 12m in diameter and 2.5m thick. These foundations are fixed to the granite base of the cliff by means of 14 anchor rods bolted under tension. - A circular drum in metal construction fixed to the barrel in an eccentric manner at more than 55m high and made up of levels 5, 6 and 7. This lookout, formerly occupied by lookouts of the French Navy, no longer houses today hui That The Radio And Computer Equipment Necessary At Cross Corsen For The Exercise Of Its Missions. - A technical room on level 9 where the equipment dedicated to the proper functioning of the radars is located. The description of the expected services are indicated in the specific technical clauses (cctp) and the program of the operation. This contract is a global design-production contract within the meaning of Articles L.2171-1 and L2171-2 of the Public Order Code.

Austria-feldkirch: Construction Work For Buildings Relating To Health

Details: The subject of the performance of this order is the delivery of the performance expected in the framework of the planned subsidy project "development of a standardized nanostructured substrate and an analytical system for routine analysis by surface-enhanced Raman spectroscopy" Registration Number Cz.01.01.01/01/22_002/0000650. The subject of the Public Contract is the Complex Supply of Services United with the Development of the Control System of the Optical and Electronic Subsystems of the Prototype Laser Stereo-lithographic System Working on the Principle of Two Photon Polymerization (slw-2pp). The Public Order includes the supply of services including, in particular, the work of programming the controller SW/firmware based on the requirements described in the technical specification of the order, testing and implementation on the lithographic device. Technical Specification of the Subject of the Contract: A. Modifications and Upgrades of the Control Sw and Fw for the Purpose of Increasing the Production Speed of Existing Lithographic Devices I. Implementation of the Mode of Vector Writing of Structures During the Xy Table Movement With the Possibility of Entering a General Trajectory, for example From a 3d Slicer. II. Design And Implementation Of A Method For Entering Data Bases Using Mathematical Precepts With The Possibility Of Saving These Templates In Libraries For Future Use. III. Sw/fw Solution Options Variable Voxel Size Changes. E.g. Voxel Expansion Using Fast Deflection Unit In Areas With Absence Of Significant Details To Increase Write Speed Iv. Control And Synchronization Of The Deflection Unit (acousto-optic Modulators And Deflectors (aom, Aod). V. Realization Of The Possibility Of Writing A Fill Motif In The Areas Defined By The Mask. Vi. Control Of The Digital Camera Including Image Processing Functions For Autofocus. Vii. Control And Optimization Of The Data And Control Flow Between The Computer Station And Control Cards. Synchronization of the Exposure Process with the Movement of the Piezoelectric Nanopositioning System for the Purpose of Minimizing the Loss of Time During Changes from the Coordinate. X. Optimizing the Communication Between the Control Computer and the Exposure Unit Controlling the Individual Subsystems of the Lithographic Device. B. Modifications and Upgrades of Control Sw and Fw for the Purpose of Increasing the Recording Quality of Existing Lithographic Devices I. Implementation and Testing of Deflection Field Calibration Methods Using Various Tools (Photodiode, Camera, Etc.) Ii Field B. Software Modularization Allowing Simple Addition Or Removal Of Modules (Table Control Module, Aod Control Module, Etc.) C. Creating Dll Api Libraries Of Controlling Sw So That It Is Possible To Call It In An Independent Gui. D. Creation of C++ / Python Interface APIs Including Implementation of Current Vector Mode C-Script Functions in Python. E. Ensuring the Optimization of the Control Sw Based on the Changes of All Extensions and the Above-mentioned Modifications of the Existing System. F. Ensuring Technical and Software Support for the Proper Operation of Systems on which Work is Performed by the Contractor, During the Term of the Contract. The order is not divided into parts. The contracting authority does not intend to discuss offers with the participants within the meaning of Art. 5.4 of the Rules.

Details: 1. In Immediately, Zapraszam Wykonawców has Wiedza, Do statement Oraz, and Profesjonalnie Zaając Się Przedmiot, Zamiot's orders to address the information of the Cenowa Information Agency in Zakresie Realizing Nij Zadania. 2. Seeing the Sobie Law. 1) To finish Lub Unieważnienie (Rfi) Without Podaniesy, Bez Podaniay, No Podaniay, No Podaniay, No Podaniesy, No Podaniesy, No Podaniesy, No Podaniesy, No Podaniesy, and No Podaniesssssssssa, No. 1) 2) Możliwości Zmiany Opisu Oraz Warunków Realization of the Order of the Terminu consisted of Cench Information, Cenowych, Information Services, and Information. 3) Aukcja, Telefonically Lub Pisemnie Drogą Elektroniną, W Zależności Od Electoru Zamawiaego. 3. Note the Act of the Code of Civil Code of the Codex I Ma is a feature of Jawny, with the inclusion of Cenowych Pozyskanych Odkonawców, Które Zamawiać That's why don't do it. He shared information on Temat Dokonany for the rest of the Uczestów. 4. As a result of the Wyceny/oferty is an individual with the acceptance of the Wszystkich Warunków Postępowanie I Realization of the Order. 5. The Executive Officer Zobowiązany will be Do Ząć, Wznad Terminie:: 1) Documents, O Których Mowa W Pkt 1.4. 2) Oświęcim, In the Union of the Agresji Na Ukraina. 6. It belongs to the All-Star Wartność Usługi W Periodie Obowiązowanie Umowy, Tj. General Cena Przeniesion Z Kol. D Wzoru Formulaarz Wyceny. 7. In the plant, the organizer is Się: 1) Prosecution of Information (rfi). 2) Umowy. 3) The Formula driver. 4) - Law of Sankcyjny. 5) Rodo Computer.

Details: Description Lot A 23 Box Clearbook, A4 Size (piece)refillable, Material: Plastic, Cover: Opaque Plastic, Dimension: 310mm X 235mm (min.), Thickness: 0.5mm (min.), Pocket: Transparent Plastic, Number Of Pockets: Twenty (20), Thickness: 0.04 Mm (min.), Color: Assorted ( Black, Blue, Red, Yellow) 23 Box Clearbook, Legal Size (piece) Refillable, Material: Plastic, Cover: Opaque Plastic, Dimension: 345mm X 235mm (min.), Thickness: 0.04mm (min.), Color: Assorted ( Black, Blue, Red, Yellow) 30 Piece Eraser, Plastic/rubber (piece) Rectangular, Dimension (l X W X T) (min.): Equivalent Volume Of 8,350mm3 422 Piece Sign Pen, Extra Fine Tip, Black (piece) Ink Color: Black, Type: Liquid Or Gel, Tip: 0.5mm, Needle Type, One (1) Piece Barrel (non-refillable), Writing Length: One (1) Km (min) 172 Piece Sign Pen, Fine Tip, Black 182 Piece Sign Pen, Medium Tip, Black (piece) , Black (piece) Ink Color: Black, Type: Liquid Or Gel, Tip: 0.7mm, Needle Type, One (1) Piece Barrel (non-refillable), Writing Length: One (1) Km (min) 43 piece Sign Pen, Medium Tip, Blue(piece) , Blue(piece) Ink Color: Blue, Type: Liquid Or Gel, Tip: 0.7mm, Needle Type, One (1) Piece Barrel (non-refillable), Writing Length: One (1) Km (min) 1 pack "wrapping Paper, Kraft, Weight: 65gsm (-5%), Size: Width: 914.4mm (36"") (-3mm), Length: 1,219.4mm (48"") (-3mm)" 25 pack  Battery, Dry Cell, Size Aa (pack) 1.5 Volts, Alkaline, Minimum Of Thirty (30) Minutes Runtime With A Current Draw Of 1.0 Amp Until Cut-off At One (1) Volt 19 pack  Battery, Dry Cell, Size Aaa (pack)1.5 Volts, Alkaline, Minimum Of Thirty (30 Min.) Runtime With A Current Draw Of 0.5 Amp Until Cut-off At One (1) Volt, Shelf Life: Five (5) Years (min) From Date Of Acceptance 19 Bottle Ink, For Stamp Pad (bottle) Volume (min): 50ml, With Applicator, Shall Conform With The Required Perfamnce Test: Dry Time, Stability Test, Resistance To Water, Effect On Rubber Stamp, Corrosion Of Stamp-pad Container 2 Unit Digital Voice Recorder, Built-in Memory: 4gb (expandable), Channel: Stereo, Recording & Playback Format: Mp3, Wma, Earphone Jack, Built-in Microphone, Usb Connectivity, Battery Life 20 Hours (min) (recording Mode, Mp3 128kbps 2 Unit Fire Extinguisher, Dry Chemical, Capacity In Terms Of Mass Of Extinguisher Medium: 4.5kg (10lbs), Purity Of The Chemical: 75% (min.), Duration Of Discharge: 10 Seconds (min.) 5 Piece Philippine National Flag (piece) Type: 1, Size: Length: 1,828.8mm (6') (-3mm), Width: 914.4mm (3') (-3mm), Material: 100% Polyester, With Certificate Of Accreditation From National Historical Commission Of The Philippines (nhcp) 4 Unit "external Hard Drive (unit) Capacity: 1tb, Weight: 181 G - 205 G, Storage Media: 2.5""sata Hdd, Rotational Speed: 5400 Rpm, System Requirements: 1. Ms Windows 7, Ms Windows 8, Ms Windows 10, Mac Os 10.7 Or Later, Linux Kernel 2.6.31 Or Later, Antivirus: Pre-installed Antivirus (optional), Accessories: With Usb 3.0 Cable And Product Manual In English" 17 Piece Flash Drive (piece) 64gb Capacity 7 Unit Computer Mouse, Wireless (unit)connection Type: Usb, Tracking Method: Optical, Resolution: 1,000 Dpi (min), High-definition Optical: 2.5x More Responsive Than Standard Optical Mouse, 1000dpi High Technology Delivers Smoother, More Accurate Cursor Control 15 Piece Light-emitting Diode (led) Light Bulb, 7 Watts, Power Consumption: 7 Watts (max), Color Temperature: 6,500 Kelvin, Lumen Output: Not Less Than 530 Lumens, Frequency Rating: 60hz, Color Rendering Index: 80 +/-10%, Input Voltage: 220-240 Volts, Ac, Socket Base: E27, Light Color: Cool Daylight, Power Factor: Not Less Than 0.90, Average Life: Not Less Than 15,000 Hours, Operating Temperature: ≥ 35°c 73 jar Glue, All-purpose (bottle) Gross Weight (min.): 200 Grams, Free Formaldehyde(max.): 0.1%, Adhesive Strength - No Slippage On Pasted Part, Solid Content (min.): 30%, Ph: 4 To 8,container: Plastic Jar, Cap: Plastic Non-stick Easy Open Twist Top, With Tapered Applicator Attached To The Cap 42 box Staple Wire, Heavy Duty (binder Type), 23/13, Type: Chisel Point, Thickness: 0.60mm (-0.05), Width: 13mm (0.20), Leg Length: 13mm (-0.30), Number Of Staples Per Strip:100, Number Of Staples Per Box: 1,000, Binding Capacity: 40-90 Sheets Of 70gsm Multi-purpose Paper 201 box Staple Wire, Standard (box) 5000 Wires Per Box, Dimensions, In Mm: (see Fig. 1), Width (w): 12.70 +0.15mm/-0.20mm, Leg Length (l): 6.00 +0.50mm/-0.20mm, Thickness (d): 0.40 + 0.05mm, Width (e): 0.50 + 0.05mm, Number Of Wires Per Strip: 100 (min) 12 roll Tape, Electrical, Made Of Polyvinyl Chloride (pvc), Width: 18mm (min.), Length: 16 Meters (min.), Assorted Colors 36 roll Tape, Masking, 24mm (roll)width: 24mm (+1mm), Usable Length: 50 Meters, Adhesion Strength: 8.5n/24mm Width (min), Breaking Strength: 65n/24mm Width (min) 68 roll Tape, Masking, 48 Mm (roll) Width: 48mm (+1mm), Usable Length: 50 Meters, Adhesion Strength: 8.5/24mm Width (min), Breaking Strength: 65n/24mm Width (min) 70 roll Tape, Packaging, 48 Mm (roll) Color: Tan, Width: 48mm (+1mm), Usable Length: 50 Meters, Base Material: Biaxially-oriented Polypropylene, Adhesion Strength: 6n/24mm (min), Breaking Strength: 14n/24mm (min) 52 roll Tape, Transparent, 24mm (roll) Width: 24mm (+1mm), Usable Length: 50 Meters, Base Material: Biaxially-oriented Polypropylene, Adhesion Strength: 6n/24mm (min), Breaking Strength: 14n/24mm (min) 69 roll Tape, Transparent, 48 Mm (roll) Width: 48mm (+1mm), Usable Length: 50 Meters, Base Material: Biaxially-oriented Polypropylene, Adhesion Strength: 6n/24mm (min), Breaking Strength: 14n/24mm (min) 11 roll Twine, Plastic (roll) Weight Per Roll (min.): 1000g, Breaking Strength(min.): 25kg 20 piece Ruler, Plastic, 450mm (piece) Transparent/clear, Ruler Scale: Millimeters, Centimeters, Inches, Clear And Sharp Ruler Scales, Width: 38mm (min), Thickness: 1.30mm (min) 14 unit Calculator, Compact (unit) Width: 100mm - 130mm, Lcd Display, Capacity: 12 Digits, Two Way Power Source (solar And Cell) 10 boc Clip, Backfold, 15mm 87 box Clip, Backfold, 19mm (box) All Metal, Clamping Length: 19mm (-1mm), Clamping Depth: 10mm (min.), Thickness Of Metal: 0.20mm (min.), Diameter Of Clip Handles: 1.0mm (min.) 94 box Clip, Backfold, 25mm (box) All Metal, Clamping Length: 25mm (-1mm), Clamping Depth: 13mm (min.), Thickness Of Metal: 0.22mm (min.), Diameter Of Clip Handles: 1.20mm (min.) 36 box Clip, Backfold, 32mm (box) All Metal, Clamping Length: 32mm (-1mm), Clamping Depth: 14mm (-1mm) Thickness Of Metal: 0.30mm (min.), Diameter Of Clip Handles: 1.45mm (min.) 26 box Clip, Backfold, 50mm (box) All Metal, Clamping Length: 50mm (-1mm), Clamping Depth: 25mm (-1mm), Thickness Of Metal: 0.33mm (min.), Diameter Of Clip Handles: 1.85mm (min.) 252 piece Correction Tape (piece) Disposable, Dispensing Mechanism: Gear Type, Dispensing System: Single Line Tape 21 piece Cutter/utility Knife, For General Purpose (piece) Length: 100mm (+2mm), Width: 16mm (+2mm) Thickness: 0.40mm (+0.02mm) 85 piece Data File Box (piece) Outside Dimension: Width: 125mm (min), Height: 230mm (min), Length: 400mm (min), Material: Chipboard: 3mm Thick (min) 53 piece Data Folder (piece) Dimension: Width: 75mm (min), Height: 230mm (min), Length 380mm (min), Material: Chipboard: 2,5mm Thick (min) 11 piece Dater Stamp (piece) With Locking Mechanism, With Self-inking Stamp, With Removable And Refillable Ink Pad, Single Color, Size Of Imprint: 30mm X 45mm (min) 9 box Envelope, Documentary, A4 (box) 14 box Envelope, Documentary, Legal, (box) Size: 254mm X 381mm (-2mm), Basis Weight: 150gsm (-5%), Thickness (min.): 0.22mm 12 box Envelope, Expanding, Kraft (box) Legal Size: 380mm X 250mm (-3mm), Expansion: 50mm (-3mm), Thickness (min.): 0.38mm 4 box Envelope, Expanding, Plastic (box) 10 box Envelope, Mailing (box) 13 piece Eraser, Felt, For Blackboard/whiteboard (piece) Overall Size (l X W X T) (min.): 125mm X 45mm X 19mm 30 box Fastener, Metal (box) Thickness: Base With Prongs And Compressor: 0.30mm (min.), Material: As Per Sample Provided, Able To Hold 25mm Thick Of Multipurpose Paper (70gsm), 70mm Between Prongs 43 piece File Organizer, Expanding, Plastic, Legal (piece) With 12 Inside Pockets With Index Tab, For Legal Size Paper /documents, Dimension (min.): Cover (flap): Width: 220mm Length: 380mm Thickness: 0.60mm, Inside Pocket: Width: 230mm Length: 360mm Thickness: 0.12mm 49 pack "file Tab Divider, A4, For 210mm X 297mm (a4 Size) Documents, Size (min): Leaf: Length: 297mm Width: 210mm Tab: Length: 65mm Width: 12mm, Basis Weight: 153gsm (-5%), Thickness: 0.22mm (min.) " 37 pack Folder, L-type, Legal, Materials: Plastic, Size: 235mm X 346mm (min.) Thickness: (min.): 0.17mm, Transparent For Easy Identification Of Contents, Assorted Colors 3 box "folder, Pressboard (box) • Material: Heavy Duty Paper Board • Size: 369mm X 242mm (-smm) • Thickness: 0.40mm (min.) • Basis Weight: 312gsm (min.) • Color: Cream, Green Or Maroon, Etc. • Accordion-pleat Gusset: Latex Paper/pvc Bookbinder/book Cloth/paper Cloth, Color: Green, Red, Blue, Expansion: 39mm (-3mm)" 1 pack Folder With Tab, A4, Material: Tagboard/carrier/foldcote/cupstock Board, Leaf Dimension: 240mm X 320mm (+1mm), Tab: 13mm (+2mm), Scoring: 20mm From Edge Of Forlder (+2mm), Other Physical Properties: Grammage G/m²:308 (-5%), Thickness, Mm:0.35 (min), Tearing Resistance, Mn, Md + Cd 2940 (min), Stiffness, Mn.m, (taber) Md + Cd: 13 (min) 45 pack Folder With Tab, Legal (pack) Material: Tagboard/carrier/foldcote/cupstock Board, Leaf Dimension: 240mm X 320mm (+1mm), Tab: 13mm (+2mm), Scoring: 20mm From Edge Of Forlder (+2mm), Other Physical Properties: Grammage G/m²:308 (-5%), Thickness, Mm:0.35 (min), Tearing Resistance, Mn, Md + Cd 2940 (min), Stiffness, Mn.m, (taber) Md + Cd: 13 (min) 27 box "index Tab (box) Transparent, Self-adhesive, Assorted Colors, Five (5) Sets Per Box, One (1) Set Composed Of 2-pieces 6"" Tab Strip And Two (2) Complete Alphabets" 40 piece Magazine File Box, Large, Material: Chipboard: 3mm Thick (min.), Leatherette Paper For Outside Cover, Coated Paper For Inside Cover, Outside Dimension: :width: 110mm (min), Height: 265mm (min), Length: 220mm (min) 36 set Marker, Flourescent (set) Barrel: Flat, Tip: Chisel Point, Color: Three (3) Assorted Colors Per Set, Material And Structure: The Barrel And The Cap Shall Be Made Of Plastic And The Cap Shall Fit Snugly Or Firmly To The Barrel And Of Such Structure That Will Easily Cap And Uncap, Quality: Writing Performance: Flourescent Marker Shall Continuously Highlight On Multipurpose Paper For A Distance Of At Least 100 Meters Under Normal Pressure And Shall Not Show Noticeable Change In Ink Intensity. Cap-off Time: 45 Minutes (min) 225 piece Marker, Permanent, Black (piece) Ink Color: Black, Tip: Felt, Bullet Type, Point: Medium, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Os Such Structure That Shall Easily Cand And Uncap 80 piece Marker, Permanent, Blue (piece) Ink Color: Blue, Tip: Felt, Bullet Type, Point: Medium, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Os Such Structure That Shall Easily Cand And Uncap 86 piece Marker, Whiteboard, Black (piece) Ink Color: Black, Blue, Red, Tip: Felt, Bullet Type, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Of Such Structure That Shall Easily Cand And Uncap 19 piece Marker, Whiteboard, Red, Ink Color: Red, Tip: Felt, Bullet Type, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Of Such Structure That Shall Easily Cand And Uncap 76 box Paper Clip, Vinly/plastic Coated, 33mm (box) Wire Diameter: 0.80mm (min), Length Of Clip: 33mm (min), Total Length Of Wire Used: 102mm (min), Assorted Colors 100 Box Paper Clip, Vinly/plastic Coated, Jumbo, 50mm (box) Wire Diameter: 1.0mm (min), Length Of Clip: 50mm (min), Total Length Of Wire Used: 155mm (min), Assorted Colors 19 Box Pencil, Lead/graphite, With Eraser, Hardness: Hb Or 2, Lead/graphite Diameter: 2mm (min), Wood Casing: Softwood, Coated, Free From Defects As Cross Grains, Interlocked Grains, Warpage Knots And The Like; And Shall Permit Easy Sharpening 11 Piece Pencil Sharpener, Table Mountable Type, With Metal Clamp, Single Cutter-head, One Hole Guide, 9-10mm In A Diameter, All Main Parts Shall Be Made Of Metal Particularly The Cutting Mechanism Cutter,pinion Gear,internal Gear,handle 23 Piece Puncher, Paper, Heavy Duty (piece) Punching Capacity: 30 Sheets Of 70gsm Multipurpose Paper, With Two Hole Guide, Diameter Of Hole: 7mm (approx) 19 Box Rubber Band No. 18 (box) 35o Grams (min) (net Weight), Thickness: 1.00mm (min), Lay Flat Length: 70mm (min), Tensile Strength: 9.81mpa (min), Elongation: 250% (min) 31 Piece Stamp Pad, Felt (piece) Thickness Of Felt: 5mm (min.), Thickness Of Metal: 0.20mm (min.), Stamp Bed Size: Width: 60mm (min.), Length: 100mm (min.) 68 Pair Scissors, Symmetrical/asymmetrical (pair) Overall Length: 160mm (min), Length Of The Cutting Blade: 70mm (min), Thickness Of The Cutting Blade: 1.70mm (min), Length Of Metal Handle (measured From The Center Of The Binding Rivet Screw To The Tip Of The Metal Handle): 35mm (min) 37 Piece Stapler, Standard Type (piece) Loading Capacity: 200 Staples (min), One Time Binding Capacity Of 2-20 Sheets Multi-purpose Paper (70gsm)r 6 Unit Stapler, Heavy Duty (binder) (unit) Type: Desktop, High Capacity/volume, Compatible With The Following Staple Sizes: 13mm And 17mm, Material: Body: Metal, Bases Grip: Non-skid Durable Material, Stapling Capacity: 25-135 Sheets Of 70gsm Multi-purpose Paper, Load Capacity: 100 Staples (min), Throat: Depth: 65mm (min) With Adjustable Paper Guide, Dimension: Manufacturer's Standard 9 Piece Tape Dispenser, Table Top (piece) Net Weight (min.): 1.2kg, Body Made Of Rigid Plastic, Smooth Finish: Weighted, Serrated Cutting Blade Thickness: 0.40mm +0.03mm, Holds Rolls Up To 24mm Wide On 75mm Core, Assorted Color 17 Pack Cartolina, Assorted Colors (pack) Bristol Board, Size: 572mm X 724mm (-3mm), Basis Weight: 100gsm (min.), Thickness: 0.12mm (min.), Assorted Colors: Blue, Green, Yellow, Orange, Lavender, Violet, Gold And Pink, Minimum Of Four (4) Colors 158 Pad "notepad, Stick-on, 50mm X 76mm (pad) Size: 50mm X 76mm (2"" X 3"") (min), Basis Weight: 70gsm (min), Sheet Thickness: 0.09mm (min), Assorted Colors" 175 Pad "notepad, Stick-on, 76mm X 100mm (pad) Size: 76mm X 100mm (3"" X 4"") (min), Basis Weight: 70gsm (min), Sheet Thickness: 0.09mm (min), Assorted Colors" 98 Pad "notepad, Stick-on, 76mm X 76mm (pad) Size: 76mm X 76mm (3"" X 3"") (min), Basis Weight: 70gsm (min), Sheet Thickness: 0.09mm (min), Assorted Colors" 153 Piece Steno Notebook (piece) Basis Weight: 55gsm (-5%) Bond, Thickness: 0.075mm (min), Size: 150mm X 225mm, (min), Top Margin: 25mm (min.), Bottom Margin: 5mm, Number Of Spaces: 22 (min), Cover Thickness: 0.40mm (-0.02mm), 40 Leaves, Ruled Both Sides 40 Bond Paper , Legal, 70 Gsm 40 Ream Bond Paper , A4, 70 Gsm 591 Ream Paper, Multicopy A4 (ream) Basis Weight: 80gsm (-3%), Size: A4, 210mm X 297mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 156 Ream Paper, Multicopy Legal (ream) Basis Weight: 80gsm (-3%), Size: Legal, 216mm X 330mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 419 Ream Paper, Multipurpose A4, Basis Weight: 80gsm (min.), Size: Legal, 216mm X 330mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 93 Ream Paper, Multipurpose Legal, Basis Weight: 80gsm (min.), Size: Legal, 216mm X 330mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 15 Box Paper, Parchment, Size: 210mm X 297mm (+2mm In Either Direction), Basis Weight: 80gsm (-5%), Fine Translucent, Suitable For Laser/inkjet Printing 48 Book Record Book, 300 Pages (book) Basis Wieght: 55gsm (-5%), Thickness: 0.07mm (minimum), Size: L X W: 265mm X 165mm (minimum), Cover Material: Laminated Chipboard, Thickness: 1.5mm (minimum) Size: L X W: 278mm X 175mm (minimum), Margins Top: 25mm (-2mm), Bottom: 8mm (+4mm), Left / Right: Manufacturer's Standard 37 Book "record Book, 500 Pages (book) Basis Weight: 55 Gsm (-5%) Thickness 0.07 Mm (minimum) Size L X W: 265mm X 165mm (minimum) Cover Material Laminated Chipboard Thickness 1.5mm (minimum) Size L X W: 278mm X 175mm (minimum) Margins Top 25mm (-2mm) Bottom 8mm (±4mm) Left / Right Manufacturer’s Standard" 35 Cart Ink Cartridge, Epson C13t664100 (t6641), Black 30 Cart Ink Cartridge, Epson C13t664200 (t6642), Cyan 30 Cart Ink Cartridge, Epson C13t664300 (t6643), Magenta 30 Cart Ink Cartridge, Epson C13t664400 (t6644), Yellow 1054 piece Ballpen 36 pack Sticker Paper , A4, Matte, White, 10 Pcs/pack 21 pack Sticker Paper , Legal, Matte, White, 10 Pcs/pack 25 roll Double Sided Tape 31 pack Photo Paper, A4 Size, Glossy, 10 Sheets/pack 15 packs Photo Paper Legal 4 bottle Disinfectant Bleaching Solution, 3.78 Lit 67 piece Certificate Frame, A4, Orientation: Landscape, Pvc Black 195 piece Certificate Holder, A4, Plastic 1 unit Microphone 74 box Plastic Fastener, Size: Regular (50pcs/box) 14 box Plastic Fastener, Size: Long 2 piece Extension Cord 2 pack Push Pin 12 piece Glue Stick (paste) 5 pack Glue Stick (for Glue Gun) 2 unit Ergonomic Chair, (midback Synthetic Leather Finished Office Chair- Padded Steel Armrest With Heavy Duty Base With Nylon Caster Wheels, With Pneumatic Gaslift For Height Adjustment) 1 unit Executive Chair (for Fo Head) 2 unit Glue Gun 2 unit Speakers 113 bottle Ink Cartridge, Epson 003 Yellow 109 bottle Ink Cartridge, Epson 003 Magenta 109 bottle Ink Cartridge, Epson 003 Cyan 131 bottle Ink Cartridge, Epson 003 Black 10 bottle Ink Cartridge, Hp Gt52 Yellow 10 bottle Ink Cartridge, Hp Gt52 Magenta 10 bottle Ink Cartridge, Hp Gt52 Cyan 10 bottle Ink Cartridge, Hp Gt53 Black 18 bottle Ink, Brother, Black, Btd60bk, 108ml 9 bottle Ink, Brother, Cyan, Bt5000c, 48.8ml 9 bottle Ink, Brother, Yellow, Bt5000c, 48.8ml 6 bottle Ink, Brother, Magenta, Bt5000c, 48.8ml 37 bottle Ink Refill, Epson Ink 001, Black, 127ml 29 bottle Ink Refill, Epson Ink 001, Cyan, 65ml 29 bottle Ink Refill, Epson Ink 001, Magenta, 65ml 29 bottle Ink Refill, Epson Ink 001, Yellow, 65ml 5 Box Sign Pen, Uniball-impact Gel, Ruber Grip, Steel Point, Water-based Pigment Gel Ink 1.0% Ball, Approx 0.6% Line, 12 Pcs/box 58 Piece Sign Penm Black, Gel 0.7mm 12 Piece Sign Pen, Ink Refill, 0.5, My Gel 3 Meter Pdx Loomex Wire 2 Cart Tonner (5501i, No. Tk6309) 12 Packs Notarial Seal Box Notarial Seal (gold), No. 23, 25pcs/box 1 Piece Glass Top Corner Table 2 Piece Steel Filing Cabinet Four Drawers, Vertical 15 Packs Specialty Board, A4 21 Pad Sign Here Sticky Note Pad 30 Packs Specialty Paper, A4 Lot B 58 Bottle Alcohol, Ethyl, 500 Ml, 68% - 72% Ethyl Alcohol, Fully Miscible In Water, Flip-top Cap, Scented 49 Gallon Alcohol, Ethyl, 1 Gallon, , Strength: 68% - 72%, Volume: 1 Gallon, Bottle: Hdpe 51 Can Air Freshener (can) Aerosol Type, Net Content: 150g (min), Assorted Scents (at Least Three (3) Scents), Long Lasting Fragrance (scent Trace Lingers For Atleast 5 Min.) 10 Piece Broom (walis Tambo) (piece)weight: 500 Grams (max), Handle: Plastic Coated Aluminum Tube, Diameter Of Handle: 19mm (min), Length Of Handle: 545mm (min), Dry Weight Of The Tiger Grass: 200grams (min), Usable Length Of Tiger Grass: 300mm (min), With Upper Stitch: 20 (min) Lower Stitch: 30 (min) 5 Piece Broom (walis Ting-ting) (piece) Made Of Mature Coconut Midribs, Standard Size (min.): 140mm Grip, Measured 150mm From The Top,usable Length (min.): 760mm, Rib Count (min.): 350 Pieces 55 Bottle Cleaner, Toilet Bowl And Urinal (bottle) Color: Cear Or Blue, Net Content: 900ml - 1000ml In Rigid Plastic Bottle, Not Chlorine Based, Viscosity: 114cp At 25°c Min Using Ostwald Method 15 Bar Detergent Bar (piece) Net Weight: 140 Grams As Packed (-2.5%) 30 Pouch Detergent Powder, All-purpose, 1kg, Net Weight: One (1) Kilogram (-2.5%) 51 Can Disinfectant Spray (can) Aerosol Type, Net Content Per Can: 400 Grams (min), Crisp, Clean Scent 11 Piece Dust Pan (piece) Made Of Rigid Non-breakable Plastic, With Detachable Handle: Diameter (min.): 30mm, Length (min.): 600mm, Base (min.): Thickness: 1.25mm, Front Width: 260mm, Back Width: 200mm, Depth: 225mm 13 Can "furniture Cleaner (can) Aerosol Type • For All Types Of Surfaces Such As Furniture, Cabinets And Countertops, Vinyl And Leather, Etc. • Net Content (min.): 300mi Per Can • Pleasant Smell. • Sufficient Amount Of Propellant To Totally Expel Content. • Shelf Life: Must Have A Shelf Life Of At Least Twenty-four (24) Months From The Date Of Manufacture But Not Less Than Eighteen (18) Months From The Date Of Delivery" 48 Bottle Hand Soap, Liquid, 500ml (bottle) Mild Scented, Bactericidal/germicidal Property, Individual Packed Plastic Bottle, Packaging: Standard Packaging Of The Manufacture 1 Unit Mop Bucket, Heavy Duty, Hard Plastic, Material: Hard Palstic, Approximate Size (min.), Width: 370mm Length: 475mm Height: 245mm, Capacity: 30 Liters 4 Piece Mophandle, Heavy Duty, Screw Type, Screw Type, With Metal Mop Head Clipper, Aluminum Handle: Thickness (min.): 0.70mm, Outside Diameter: 22mm To 25mm Length (min.): 1.5 Meters 10 Piece Mophead, Made Of Rayon, 36 Stands Per Head (min), 3 Ply's Per Stand, 40 Threads Per Ply, Weight:400 Grams (min), Length: 410mm (min), Length Of Band: 170mm (min), Breaking Strength, Kg: 126 (min) 5 Kilo "rags All Cotton (bundle) Diameter: 178mm (7"") (approx.) Minimum Of Thirty-two (32) Pieces To A Kilogram, Assorted Colors" 7 Pack Scouring Pad (pack) Made Of Synthetic Nylon, 150mm X 200m (min.), Thickness (min.): 8mm, Color: Green 56 Pack/roll "trashbag, Xxl Size (roll/pack) Color: Black, Dimension: 940mm X 1016mm (-6mm) (37"" X 40""), Thickness: 0.02mm (min), Tensile Strength At Break: Astm D882, One Way: 15n/mm² (min), Other Way: 12n/mm² (min), Elongation At Break: Astm D882, One Way: 400% (min), Other Way: 600% (min)" 54 Pack/roll Trashbag, Large Size (roll/pack) 29 Pack/roll Trashbag, Xl Size (roll/pack) 19 Piece Wastebasket, Non-rigid Plastic, Made Of Rigid Plastic, Thickness (min.): 1.20mm, Height (min.): 225mm, Full Volume (up To The Lid): 8.5 Liters (min.), Assorted Colors 44 bottle Dishwashing Liquid Lemon/calamansi 25 pcs Dishwashing Paste, 200g 34 Pack Tissue, Interfolded Paper Towel (pack) Basis Weight: 34gsm (+/-2gsm), Sheet Dimension: Width Of Sheet: 200mm (+3mm), Length Of Sheet: 200mm (+3mm), Total Number Of Sheets Per Pack: 150 Pulls, Interfolded, Number Of Ply: One (1) Ply 164 Pack Toilet Tissue Paper, 2 Ply (pack) , 100% Recycled, 12 Rolls Per Pack, Weight: 28gsm (min.), Sheet Dimension: Width Of Sheet: 100mm (+/-3mm), Length Of Sheet: 114mm (-5mm) 18 Bottle Hand Sanitizer (bottle) Form: Liquid Or Gels, Volume: 500ml, Hypoallergenic, Non-drying, Bottle: Pump Dispenser Plastic, Fda Certificate Of Product Registration/notification 20 Can Insecticide (can) Aerosol, Kerosene Based, Quick Kill Contact And Residual Type, Cautionary Scent/odor Required, Multi-insect Killer, Net Content Per Can: 600ml (min.) 41 piece Toilet Deodorant Cake, Assorted, 100grms 6 Pcs Doormat Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Details: Description November 19, 2024 Request For Quotation No.: 2024-cims(030,031,037&046)-npsvp-0062 Procurement Of Various Ict Equipment For Command Center And Boardroom (negotiated Procurement – Small Value Procurement) Sir/madam: The Credit Information Corporation Through Credit Information Management Services Invites You To Submit Your Quotation / Offer For The Item/s Described Below Using The Price Proposal Form (see Annex "a") Subject To The Terms And Conditions Stated In The Rfq And Terms Of Reference (see Annex “b”). Lot Particulars Qty Uom Unit Cost (in Php) Approved Budget For The Contract (abc In Php) 1 Procurement Of Various Ict Equipment For Command Center And Boardroom 1.) Command Center And Boardroom Monitors (65-inch) Television Set 2 Unit 64,400.00 128,800.00 2.) Command Center And Boardroom Monitors (55-inch) Television Set 4 Unit 20,500.00 82,000.00 3.) Video Conferencing Equipment Camera 1 Unit 75,500.00 75,500.00 4.) Noise Cancelling Headsets And Higher 120 Unit 1,560.00 187,200.00 5.) Hdmi Cables 6 Unit 1,166.67 7,000.00 Total Abc In Php (inclusive Of Vat) 480,500.00 Delivery Schedule: Within Fifteen (15) Calendar Days Upon Receipt Of Notice To Proceed And Completion Of Pre-work Activities (e.g. Installation/setup). Delivery Site: 6f, Exchange Corner Bldg., 107 Va Rufino St. Cor. Esteban St., Legaspi Village, Makati City Note: Manner Of Award Will Be On A Lot Basis. Bids Received In Excess Of The Approved Budget For Contract (abc) Shall Be Automatically Rejected At The Opening Of The Quotations. Supplier/s Who Submits The Lowest Calculated And Responsive Quotation Shall Be Eligible For Award. Submit Your Proposal, Together With The Following Documents, Duly Signed By You Or Your Duly Authorized Representative, Not Later Than November 25, 2024, 5:00 P.m. 1. Philgeps Certificate/number; 2. Mayor’s/business Permit For The Current Year; 3. Notarized Omnibus Sworn Statement (annex C); And 4. For Authorized Representatives: Spa (sole Proprietorship/partnership), Secretary’s Certificate Or Board Resolution (corporation). Note: Philgeps Platinum Registration Certificate May Be Submitted In Lieu Of Philgeps Number, And Mayor’s/business Permit For The Current Year Only One (1) Set Of Documents Certified To Be True Copies Of The Original Shall Be Required. Proposals And Other Documents Required Shall Be Sent Electronically To Procurementunit@creditinfo.gov.ph. Electronically Submitted Proposals And Documents Must Be Submitted On Or Before The Deadline Of Submission As Stated In This Rfq. Upon Determination Of Your Technical, Legal And Financial Eligibility, The Administration Unit Of The Cic Shall Undertake Negotiation With Your Company Based On The Technical Specifications For This Project. Phoebe Ann R. Wagan Administrative Services Officer V Price Proposal Form Annex "a" Date: Administrative Office Credit Information Corporation 6f, Exchange Corner Bldg., 107 Va Rufino St. Cor. Esteban St., Legaspi Village, Makati City Sir/madam: Having Examined The Request For Quotation No. Rfq No. 2024-cims(030,031,037&046)-npsvp-0062, Which Includes The Technical Specifications, The Receipt Of Which Is Hereby Duly Acknowledged, The Undersigned, Offer To, In Conformity With The Said Request For Quotation For The Sums Stated Hereunder: Lot Particulars Qty Uom Unit Cost (in Php) Bid Price In Php (inclusive Of Vat) 1 Procurement Of Various Ict Equipment For Command Center And Boardroom 1.) Command Center And Boardroom Monitors (65-inch) Television Set 2 Unit 2.) Command Center And Boardroom Monitors (55-inch) Television Set 4 Unit 3.) Video Conferencing Equipment Camera 1 Unit 4.) Noise Cancelling Headsets And Higher 120 Unit 5.) Hdmi Cables 6 Unit Total Abc In Php (inclusive Of Vat) Total Bid Price In Words: We Undertake, If Our Proposal Is Accepted, To Deliver The Goods/services As Identified In The Technical Specifications/terms Of Reference And In Accordance With The Delivery Schedule. Our Quotation Includes All Taxes, Duties And/or Levies Payable And Is Valid For A Period Of Thirty (30) Calendar Days Upon Issuance Of This Document. We Understand That The Cic Technical Working Group May Require From Us The Submission Of Documents That Will Prove Our Legal, Financial And Technical Capability To Undertake This Project. Until A Formal Contract Is Prepared And Executed, This Proposal, Together With Your Written Acceptance Thereof And The Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Or Any Proposal You May Receive. Dated This . Signature Of Authorized Representative Printed Name Of Authorized Representative Capacity/position/designation Duly Authorized To Sign Proposal For And On Behalf Of: Annex "b" Compliance Form Technical Specifications Procurement Of Various Ict Equipment For Command Center And Boardroom 1. Overview The Credit Information Corporation (cic) Is A Government-owned Corporation Mandated To Establish A Comprehensive And Centralized Credit Information System (cis) For The Collection And Dissemination Of Fair And Accurate Information Relevant To, Or Arising From Credit And Credit-related Activities Of All Entities Participating In The Financial System That May Yield Data On Creditworthiness And Payment Behavior. To Sustain This Mandate The Cis Must Be Available To Provide Credit Information When Needed By The Credit Industry To Improve Decision Making And Reduce Credit Risks. Effective And Efficient Management Of The Underpinning Resources Of The Cis Therefore Is Cic’s Utmost Concern To Ensure Continuous Availability And Optimum Performance Of The System. 2. Scope The Project Covers The Procurement Of The Items: Six (6) Units Of Television Sets With Stands (two 65-inch Units And Four 55-inch Units), One (1) Unit Of Video Conferencing Camera, And One Hundred Twenty (120) Units Of Noise Canceling Headsets And Higher (usb) Including Six (6) Hdmi Cables With A Minimum Length Of 5. Activities Include: ● Purchase And Delivery Of The Items For Procurement In The Main Office At Makati City. ● Installation And Setup Of The Procured Items. 3. Definition Of Terms Term Definition High-definition Multimedia Interface (hdmi) It Is A Standard For Transmitting High-quality Audio And Video Signals. It Was Developed By Hitachi, Matsushita, And Sony To Replace Analog Audio/video Cables Like The Dvi Connector, Which Is Still Used In Some Applications. Universal Serial Bus (usb) It Is A Mechanism Used To Connect Peripheral Devices To Computers. Before The Advent Of Usb Technology, A Pc Typically Included One Or Two Serial Connections, A Parallel Port, Keyboard And Mouse Connectors, And In Some Instances, A Joystick Port. Video Conferencing It Is A Live Video-based Meeting Between Two Or More People In Different Video-enabled Conferencing People To Meet And Collaborate Face To Face Long Distance By Transmitting Audio, Video, Text, And Presentations In Real-time Through The Internet.locations Devices. Using Video Multiple Allows Service Level Agreement (sla) A Commitment Between A Service Provider And A Client. Particular Aspects Of The Service – Quality, Availability, Responsibilities – Are Agreed Between The Service Provider And The Service User. --definitions Are Retrieved From Wikipedia, Google 4. Responsibilities Of The Cic Cic’s Responsibilities Concerning This Project Are As Follows: ● The Credit Information Corporation (cic) Will Provide The Service Provider’s Authorized Representative Access To Its Premises, Equipment, And Facilities Located Therein To Perform Its Obligations, Provided That Such Representative Shall Be Accompanied By The Duly Assigned Personnel Of The Cic Technical Support Department. ● Secure The Necessary Access Pass And Building Permit Required By The Facility Administrator And Assume Responsibility For The Safe Custody And Use Of The Equipment Installed By The Service Provider. ● Monitor The Provided Services And Verify If The Parameters Under The Service Level Agreement Are Met And Performed By The Vendor. ● Issuance Of A Certificate Of Inspection And Acceptance To The Service Provider Upon Successful Completion Of The Agreed Activities Certifying That The Service Provider Conforms To All Requirements Stipulated In This Document. 5. Requirements 5.1. Technical Requirements Item Details Statement Of Compliance “comply” Or Proof/evidence Of Compliance “not Comply” 1. Command Center And Boardroom Monitors (65-inch) Television Sets ● Two (2) 65-inch Units 60hz Android Google Tv With 4k Up Hdr Display Units (or Better) Specs: ● Android Google Tv ● 65 Inch ● 60hz ● 4k Hdr Display ● (see Specs Info Next Page) ● Bundle: Tv Mobile Stand General Specs: ● Tv Mobile Stand Floor Cart For 32-65 Inches Tv Adjustable 32-65 Inch ● Removable Cart Tv ● Landscape/portrait View ● Tv Dashboard With 32-bit A55x4 1.3ghz Cpu Core And Gpu Core G31 Mp2 800mhz Certified By Google Tv. ● Wi-fi Connectivity 2.4g/5g, Usb 2.0 And Bluetooth Bt5.0 Hdmi2.1/hdmi1.4 ● Audio Power 2x9.5w, Dolby Audio With Refresh Rate Of 60hz, Hdr10, 4k Resolution And Panel Resolution Of 3840’2160; Aspect Ratio Of 16:9 2. Command Center And Boardroom Monitors (55-inch) Television Sets ● Four (4) 55-inch 60hz Android Google Tv With 4k Up Hdr Display Units (or Better) Specs: ● Android Google Tv ● 55 Inch ● 60hz ● 4k Hdr Display ● Bundle: Tv Mobile Stand General Specs: ● Tv Mobile Stand Floor Cart For 32-65 Inches Tv Adjustable 32-65 Inch ● Removable Cart Tv ● Landscape/portrait View ● Tv Dashboard With 32-bit A55x4 1.3ghz Cpu Core And Gpu Core G31 Mp2 800mhz Certified By Google Tv. ● Wi-fi Connectivity 2.4g/5g, Usb 2.0 And Bluetooth Bt5.0 Hdmi2.1/hdmi1.4 ● Audio Power 2x9.5w, Dolby Audio With Refresh Rate Of 60hz, Hdr10, 4k Resolution And Panel Resolution Of 3840’2160; Aspect Ratio Of 16:9 3. Video Conferencin G Equipment Camera One (1) Unit Of Video Conferencing Camera For Mid To Large-size Conference Room. ● 1 Ptz Camera, 1 Tabletop Speaker, Microphone, And Remote Control Technical Specs: Camera: ● Smooth Motorized Pan, Tilt, And Zoom Controlled From Remote Or Console ● 260 Degrees Pan, 130 Degrees Tilt ● 10x Lossless Hd Zoom ● 90 Degrees Field Of View ● Full Hd 1080p 30fps ● Autofocus Remote Control: ● Dockable ● 8.5 M/28-foot Range Speakerphone: ● Full Duplex Performance ● Acoustic Echo Cancellation ● Noise Reduction Technology ● Ultra Wideband Audio ● Bluetooth And Nfc Wireless Technology ● Lcd For Caller Id, Call Duration, And Other Functional Response ● Leds For Speakerphone Streaming, Mute, Hold, And Bluetooth Wireless Pairing ● Touch Controls For Call Answer/end, Volume, And Mute. Bluetooth – Plus Camera Ptz, “home” Present, And Far-end Control Microphones: ● Four Omnidirectional Microphones Supporting A 20-foot Diameter Range ● Frequency Response: 100hz-11khz ● Sensitivity: -28db +/-3db ● Distortion: <1% @1khz At 106db Speakers: ● Frequency Response: 120hz-14khz ● Sensitivity: 83dbspl +/-3db At1w/1m ● Distortion: <5% From 200hz ● Max Output: 91dbspl Hub/cable: ● Central Mountable Hub For Connection Of All Components ● Two Cables For Connections Between Hub And Camera/speakerphone (length:5m/16’) ● One Usb Cable For Connection To Pc/mac (length: 3m/9.8’) Mount: ● Dual-purpose Mount For Wall Placement Or For Elevating The Camera On A Table Compliance And Tools: ● Usb 2.0 Complaint ● Downloadable Diagnostic Tool ● Field Upgradable Firmware Tool ● Downloadable App Plug-in For Advanced Feature Support 4. Noise-cance Ling Headsets One Hundred Twenty (120) Units Of Noise-canceling Headsets (usb), Usb Port (type-a Or Type-c Or Both) With Digital Audio, Bi-directional Specs: ● Cable Length: 1.8 M ● Microphone Type: Bi-directional ● Input Impedance: 22 Ohms ● Sensitivity (headphone): 115 Db +/-3 Db ● Sensitivity (microphone): -42 Dbv/pa +/- 3 Db ● Frequency Response (headset): 20 Hz - 20 Khz ● Frequency Response (microphone): 100 Hz - 16 Khz Warranty Information: ● 2-year Limited Hardware Warranty Compatibility: ● Windows®, Macos, Or Chromeostm And Popular Calling Platforms. ● Usb Port 1type A Port Or Adapter 5. Hdmi Cables Specs: ● Six (6) Units Of Hdmi Cables* Only With A Length Of A Minimum Of 5 Meters With 4k Above Resolution *note: Not 6 Cables Per Tv A. General Requirements Statement Of Compliance “comply” Or “not Comply” Proof/evidence Of Compliance I. Must Include One (1) Warranty For All The Items To Be Provided By The Manufacturer (command Center Boardroom Monitors Both 65 And 55 Inch) Television Sets, Video Conferencing Equipment Camera, And Hdmi Cables) And 2-year Limited Hardware Warranty For Noise Canceling Headsets And Higher. Ii. These Products Are Eligible For One (1) Week Outright Replacement If: ● It Shows Defects In Equipment/unit. ● It Malfunctions Or Is Not Working As Intended Under Normal Use. (command Center Boardroom Monitors (65 And 55 Inch) Television Sets, Video Conferencing Equipment Camera, Noise Canceling Headsets, And Hdmi Cables). 6. Schedule Of Delivery The Service Provider Shall Commence The Delivery Of The Items Within Fifteen (15) Calendar Days Upon Receipt Of The Notice To Proceed And Completion Of Pre-work Activities (e.g. Installation/setup). 7. Terms Of Payment Payment Shall Be Made On The Following: 1. Payment Shall Be Made Once The Delivery And Installation Are Completed Subject To Submission Of The Billing Statement And Other Supporting Documents And Reports By The Sp, Subject To The Issuance Of The Certificate Of Satisfactory Service By Cic. 2. The Start Of Billing Shall Be Based On The Date Of Issuance Of The “certificate Of Acceptance”. Statement Of Compliance Dated This . Signature Of Authorized Representative Printed Name Of Authorized Representative Capacity/position/designation Duly Authorized To Sign Compliance For And On Behalf Of: Omnibus Sworn Statement Republic Of The Philippines ) City/municipality Of ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. Select One, Delete The Other: [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. Select One, Delete The Other: [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; Annex "c" 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. Select One, Delete The Rest: [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Procurement Agent If Engaged, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Procurement Agent If Engaged, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Procurement Agent If Engaged, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A) Carefullyexamineallofthebiddingdocuments; B) Acknowledgeallconditions,localorotherwise,affectingtheimplementationof The Contract; C) Made An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D) Inquireorsecuresupplemental/bidbulletin(s)issuedforthe[nameofthe Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity; And 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. Bidder’s Representative/authorized Signatory Subscribed And Sworn To Before Me This Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. . Witness My Hand And Seal This Doc. No. Page No. Book No. Series Of . Note: Identity” Refers To The Identification Of An Individual Based On: At Least One Current Identification Document Issued By An Official Agency Bearing The Photograph And Signature Of The Individual, Such As But Not Limited To, Passport, Driver’s License, Professional Regulations Commission Id, National Bureau Of Investigation Clearance, Police Clearance, Postal Id, Voter’s Id, Barangay Certification, Government Service And Insurance System (gsis) E-card, Social Security System (sss) Card, Philhealth Card, Senior Citizen Card, Overseas Workers Welfare Administration (owwa) Id, Ofw Id, Seaman’s Book, Alien Certificate Of Registration/immigrant Certificate Of Registration, Government Office Id, Certification From The National Council For The Welfare Of Disabled Persons (ncwdp), Department Of Social Welfare And Development (dswd) Certification; The Board Resolution Or Secretary’s Certificate Referring To The Said Board Resolution Designating The Bidder’s Authorized Representative And Signatory Need Not Specifically Indicate The Particular Project Where Such Authority Is Given Provided That The Said Authority Covers Activities By Cic. Day Of [month] [year]. Name Of Notary Public “sec. 12. Competent Evidence Of Identity – The Phrase “competent Evidence Of