Computer Hardware Tenders

Details: Title: Raamovereenkomst Voor De Bevoorrading En Werking Van Het Common Use Platform (cup), De Zelfbedieningsinfrastructuur Voor Bagageafgifte (self-service Bag Drop-off) En Aanvullende Infrastructuur description: Raamovereenkomst Met Één Onderneming Voor Vijf Jaar (met De Mogelijkheid Om Driemaal Te Verlengen Met 1 Jaar), Die Zowel De Bevoorrading Als De Werking Omvat Van: • Het Kernplatform Van Het “common Use Platform” (cup) (software En Hardware: Servers, Computers, Randapparatuur). • Onderhoud, Serviceverlening, Ondersteuning En Innovatie Van Het “common Use Platform” (cup) • Zelfbedieningsinfrastructuur Voor Bagageafgifte (“self-service Bag Drop-off", Afgekort: “sbd”) • Aanvullende Infrastructuur (toegangscontrole, Externe En Mobiele Incheckbalies, Geautomatiseerde Boarding (zelfbediening Instappoorten (“self-service Boarding Gates”)), …). Opties Zijn Niet Toegestaan.

Details: Description Item Description Abc Unit Quantity 1 Grams Negative (grams Negative Id Card). 374,000.00 Piece 680.00 2 Grams Negative (grams Negative Susceptibility Id Card) 374,000.00 Piece 680.00 3 Grams Positive (grams Positive Id Card) 352,000.00 Pcs 640.00 4 Grams Positive (grams Positive Susceptibility Id Card) 352,000.00 Piece 640.00 5 Streptococcus Sensitivity Testing 33,000.00 Pc 60.00 6 Haemophilus Id (haemophilus Id Vitek) 22,000.00 Piece 40.00 7 Yeast Id Card (yeast Id Card) 33,000.00 Piece 60.00 8 Yeast Sensitivity Testing (yeast Sensitivity Testing) 33,000.00 Piece 60.00 9 Bacillus Id Card (bcl) 22,000.00 Piece 40.00 10 Anaerobic And Corynebacterium Id Card (anc) 22,000.00 Piece 40.00 11 Tubes For Automated Pacteriology (tubes For Automated Bacteriology Suspension Id Card) 103,800.00 Box 3.00 12 Theraphy Solution (0.45%) Suspension 500ml 54,000.00 Bottle 30.00 Terms Of Reference For Procurement Of Reagent Card And Related Supplies For Automated Bacterial Identification And Sensitivity Test (revised February 15, 2024) This Is Lot Bid The Supplier Awarded To Supply The Reagent Cards And Related Supplies/consumables Shall Adhere To The Terms Of Reference Stated Below:  Provide For Free The Following Equipment: 1a. One (1) New Unit Of Bench-top/space Fully Automated Bacterial Identification And Sensitivity Test Machine. Other Attributes Of The Equipment Shall Include:  Cards (close System) For Identification And Antimicrobial Sensitivity Testing Inclusive Of The Following: Gram-positive Id; Gram-negative Id; Haemophilus/neisseria Id; Anaerobic And Corynebacterium Id; Bacillus Id; Yeast Id; Gram Negative Ast; Gram Positive Ast; Streptococcus Ast; Enterococcus Ast And Yeast Ast  Manageable And Less Manipulation Of The Unknown Bacterial Suspension  Capable Of Batch Testing; Maximum Of Up To 60 Specimens And Random Access.  Short Turn-around Time: Bacteriologic Identification (id) In 8 Hours; Antimicrobial Sensitivity Test (ast) In 12-18 Hours  Minimum Inhibitory Concentration (mic)-based Ast Calibrated With Clsi/eucast Reference Standards  Dimension Of Machine Shall Fit In To Allotted Space In The Bacteriology Section  Closed-system Automated Bacterial Identification And Sensitivity Test Machine  The Machine And Products Must Have Been Installed And Validated Of Similar Equipment To Other Government Tertiary Clinical Laboratories. 1b. Compatible Ups For The Analyzer 1c. With Corresponding Computer Hardware And Software For Data Processing And Interpretation And Printer. 1d. Can Be Connected To A Middleware Software Workstation 2. Provide For Free Atcc Quality Control (qc) Strains (e.coli, K. Pneumoniae, S. Aureus, P. Aeruginosa, H. Influenzae, E. Faecalis, S. Pneumonia, E. Hormaechei, E. Casseiflavus And Other Qc Strains- Applicable To Identification And Antimicrobial Sensitivity Test Cards). 3. Provide For Free The Installation, Regular Preventive Maintenance And Calibration Of Equipment, Replacement Of Parts Or Units Duly Coordinated With Concerned Laboratory Staff And Efm Personnel. 4. Provide For Free The Training And Re-training Of Laboratory Staff To Make Them Competent To Operate The Equipment. 5. Provide For Free The Clinical Laboratory Standards Institute (clsi) For Antimicrobial Susceptibility Testing Guideline (hard Copy) 6. Has The Capacity To Upgrade The Equipment Provided When Necessary Or When Need Arises Upon Request By The End User Without Additional Cost To Procured Reagents. 7. The Moa Shall Cover A Period Of 6 Months With Added Stipulation For Extended Use Of Machine For Free In Case The Reagent Cards And Related Supplies Are Not Consumed Within 6 Months. 8. Ensure Compliance With Scheduled Preventive Maintenance And Calibration Of Equipment. 9. Ensure Prompt Response By Designated Engineers/s Within 3 Hours For Correction Of Equipment Failure Or Malfunction. 10. Reimburse All Examinations That Are Sent Out Related To Equipment Failure Or Malfunction. 11. Replenish Consumed Reagent Cards And Related Supplies Incidental To Repeated Test Runs Due To Equipment Failure, Malfunction Or Trial Runs During Training/re-training. 12. Machine Must Be Presented And Introduced To The Microbiology Section Before Procurement  Product Demonstration/presentation (conduct An In – Depth Specimen – Machine Management Training). Machine/reagents/accessories To Be Presented  Product Specialist Should Be A Microbiologist Certified 13. Delivery Of Reagent Cards, Consumables And Qc Strains Required Together With The Machine Must Be Delivered On Time In Agreement Set By The Clinical Laboratory. 14. Machine Must Have Bacterial Turbidimeter And Consumables Such As: Pipettor; Tips; Tubes For Bacterial Suspension And Bottle – Top Dispensers (dispensette) 15. Assures Replacement Of Reagent Cards And Related Supplies/consumables (delivered Within 6 Months Of Expiration Date) Before Expiration. 16. Provide For Free Reagent Cards And Service Assistance For Equipment Performance Verification Or Validation. 17. The Product Carried Is Covered By A Current Certificate Of Product Registration Or, In Absence Of The Former, Proof Of Renewal Or Updated Certificate Of Exemption Issued By Philippine Food And Drug Administration (fda). (fda Circular 2020-001), These Are Preferably Covered By Valid Certification By Us Fda, European Union, Or Product Certification Of Similar Nature From Country Of Manufacture. 18. Manufacturing Of Reagents And Equipment Are Covered By Relevant Iso Certification Or Quality Certification Of Similar Nature. 19. Supplier/distributor Is Preferably, But Not Necessarily, Iso 9001:2015 Certified. 20. The Supplier Should Have A Product Specialist/microbiologist Certified And An Engineer With At Least 3-5 Years’ Experience In Servicing Clinical Microbiology Laboratories. 21. The Supplier Should Have A Valid Current Cad (certificate Of Authorized Distributorship) Specific For The Product And Equipment Referred To In The Terms Of References. Clmmrh – Department Of Pathology Bacteriology Section Terms Of Reference For Procurement Of Culture Media, Staining Reagents And Other Supplements/consumables For Bacteriology Section 1. Provide Updated Safety Data Sheet (sds) For All Staining Reagents, Supplements And Culture Media Upon Delivery Of Items. 2. Assures Replacement Of Commercially Prepared Plates Media (ppm) With One (1) Month Remaining Shelf- Life Before The Expiration Date. 3. Assures From The Supplier Regarding With The Staggering Of Commercially Prepared Plates Media (ppm) Due To Shelf- Life (at Least 30 Days) Expiry Date. 4. Provide From The Supplier The Media Quality Control Report For All Commercially Prepared Media Plates Upon Delivery Of Items. 5. Assure Replacement Of Unused Antibiotic Disks(cartridge), Supplements And Consumables Delivered Within Six (6) Months Of Expiration Date. Clmmrh – Department Of Pathology Bacteriology Section Additional Terms Of Reference For Procurement Of Antibiotic Removal Device (ard) And Standard Bottles For Blood Culture Isolation Assures From The Supplier Regarding With The Staggering Delivery Of Vitek 2 Identification (id) Cards And Antimicrobial Sensitivity Test (ast) Cards (delivered Within Six (6) Months Before Expiry Date. Total Abc 1,774,800.00

Description: Defense Health Agency (dha) component Acquisition Executive (j-4) northeastern Healthcare Operations Contracting Division (neho-cd) subject: Source Sought Announcement this Is A Sources Sought Notification Issued By The Defense Health Agency (dha) Northeastern Healthcare Operations Contracting Division As Part Of Its Market Research, On Behalf Of The A.t. Augusta Military Medical Center (atammc), 9300 Dewitt Loop, Oaks Pavilion, Fort Belvoir, Va 22060. The Government Intends To Award A Firm-fixed Price For Commercial Items For The Procurement Of A Comprehensive Healthcare Simulation. the Purpose Of This Sources Sought Is To Be Used For Preliminary Market Research Information And Acquire Knowledge Of Potential Qualified Sources. This Notice Is Not A Request For Competitive Proposals. There Will Be No Request For Quote Or Solicitation Available For Competitive Proposals At The Present Time. Phone Calls Will Not Be Accepted. the Defense Health Agency Is Currently Conducting A Market Survey To Assess The Availability Of The Following: a Comprehensive Simulation Management, Skills Assessment, And Audio-video Capture Solution That Streamlines The Activities Of Mid-to-large-size Clinical Simulation Centers. server Computers, Cameras, Mounting Hardware, Microphones, Speakers. capable Of Recording Audio And Video 24/7, Sending Live Feeds Back To A Reviewing Station. equipment Must Be Rapidly Deployable With Plug And Play Capability. simple Username/password Access. us Electrical Power Standard: All Pc Workstations And User Equipment Requires Standard 110-volt 60 Cycle Electrical Receptacles (15 Amp Minimum). 120-volt Power Can Be Accommodated. all User Access To The Application Is Via Network Connected Workstations And Laptops. complete Standalone Video Capture-to-debrief Solution. naics Code: 334310 Audio And Video Equipment Manufacturing prospective Participants Are Required To Be Registered And Certified In The System For Award Management (sam). Registration Can Be Accessed Via Http://www.sam.gov. interested Parties, May Express Their Interest, And Provide A Capabilities Statement Products List Nlt Monday, 01 July 2024 At 5:00 Pm Est. A Determination By The Government Not To Compete This Requirement Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received As A Result Of This Notice Will Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. please Submit Non-proprietary Information “only”. The Government Will Not Be Responsible For Proprietary, Or Competition Sensitive Information Contained In Responses Received. Ensure That All Replies To This Notification Incorporate The Following Information: Company Name, Address, Point Of Contact, Unique Entity Id, Size Of Business Pursuant To North American Industrial Classification System (naics). responses To This Announcement Will Not Be Returned. Responders Are Solely Responsible For All Expenses Associated With Responding To This Announcement. Government Will Not Be Financially Responsible For Information Received In Response To This Announcement. the Points Of Contact For This Action Are: contract Specialist: Ms. Pamela Renteria, Pamela.i.renteria.civ@health.mil contracting Officer: Mr. James L. Illes, James.l.illes.civ@health.mil

Description: This Is A Sources Sought Notice For Domestically Manufactured Products Only. This Is Not A Solicitation For Proposals, Proposal Abstracts, Or Quotations. Per The Buy American Act And Executive Order 14005, The National Institutes Of Allergy & Infectious Disease (niaid) Is Seeking Information For Domestically Manufactured Products Only, Per The Requirements Under The Buy American Act And Requirements Relating To Executive Order 14005 Entitled: “ensuring The Future Is Made In All Of America By All Of America’s Workers”, In The Event That A Nonavailability Waiver Request Submitted Through The Made In America Office (miao)’s Digital Waiver Portal Is Required." Respondents Must Certify In Capabilities Statement That Products Are Manufactured In The United States. the Purpose Of This Notice Is To Obtain Information Regarding The Availability And Capability Of All U.s Manufactured Products That Are Equal To The Following Product: dissecting Microscope With Double Spot Illuminators specifications: microscope Body - Manually Operable Zoom 5:1 (0.8x...4.0x) On Both Sides - Fixed Zoom Click Stops 0.8x-1x-2x-3x-4x - Free Working Distance 110 Mm - Viewing Angle 45° With Adjustable Interocular Distance 55...75 Mm - Eyepiece Mount 30 Mm With Maximum Field Number 23 Mm - Mount D=76 Mm For Stemi Mount/mount S - Interface D=66 Mm For Illuminators - Thread M52 For Front Optics Or Analyzer - Integrated Near-vertical Led Illumination (ivi) For Stands K edu/lab/mat, Stand M Led, Controller K Led Additionally included: - Eyepieces 10x/23 Br. Foc. - Spiral Cable Rj12 front Optics 3 1.5x Fwd 56 Mm front Optics 3 1.5x Fwd 56 Mm '- Thread M49x0.75 For analyzer - Adapter D=58 Mm To D=66 Mm front Optics 3 2.0x Fwd 43 Mm front Optics 3 2.0x Fwd 43 Mm - Thread M49x0.75 For analyzer - Adapter D=58 Mm To D=66 Mm stemi Mount Column 32 With Drive - Lifting Range +/- 25 Mm, Load Capacity Max. 5 Kg - 2x M8 Thread For Adaptation Of Illuminator Carriers - Adjustable Ease Of Motion By Twisting The Knobs double Boom Sda (d) - Dimensions 670x200x170 Mm, Load Capacity Max. 8 Kg - Double Arm 360° Rotatable Around The Vertical Column - Boom Length (incl. Stemi Mount) 360-690 Mm - Tilting/swiveling Head With Column 32/200 Integrated additionally Included: - Vertical Column Sda 40/610 With Screw M16 - Safety-ring For Height Fixation stand Base Sda (d) - Dimensions 350x350x50 Mm, Weight 30 Kg - With Rubber Feet, 2 Recessed Grips, Central Borehole For screwing The Vertical Column Sda 40/610 led Double Spot For Column 32 (d) - Led Hi-power Double Spot 5500k - Goose-neck Branches, 2x 570 Mm - Clamping Ring For Column 32 - 2-channel Control Unit - Table-top Supply Unit 100-250v And Country-specific Mains cord dissecting Microscope Double Spot Illuminator With Pol, On Transmitted Light Base, With Color Camera v8 Microscope Body apochromatic Stereo Telescope System With 76 Mm Mount diameter, With 8:1 Zoom (1.0x ... 8.0x) Manually Operable On both Sides And Switchable Click Stops At 1x-1.25x-1.6x-2x-2.5x-3.2x-4x-5x-6.3x-8x binocular Ergo Tube S 5-45° - Eye Distance 51-75 Mm – Nbr Bellows intermediate Phototube S, Right 50:50/0:100/100:0 - Stereo Observation By 50% Of Brightness And 50% From Right channel To Camera Simultaneously Or - 100% From Right Channel To Camera And 100% From Left channel To Left Eye Or - 0% To Camera And Stereo Observation By 100% Of Brightness objective Plan Apo S 1.0x Fwd 60 Mm (137 Mm Parfocal Length) eyepiece Pl 10x/23 Br. Foc. eyepiece Pl 10x/23 Br. Foc. stand M Led - Stand Base D340xw300xh35 Mm - Working Surface W255xd215 Mm - Interfaces D=84 Mm For Stages And D=45 Mm For Tl Polarizer - Central Through-hole 40 Mm - Column 360 Mm With Drive, Lifting Range 190 Mm - Stemi Mount D=76 Mm, Load Capacity 5 Kg, Adjustable friction - Transillumination Units M Led Retrofittable - 2x Sockets For Ivi And Illuminator K Led - Separate Rl/tl Controls: 2x Rotary Push Knob For On/off/ dimming - 3x Memory Button To Save/recall Three Mixed Light Settings: save: Long Press (2 Sec), Call: Short Press Saves: Currently set Values (on/off, Brightness) Of Rl/tl Illuminators K/m Led does Not Save: Mechanical Adjustment Of Lighting And segment Setting And Rotation Of Ring Illuminator K Led - Integrated Power Unit 12v Dc 24w/100...240v Ac/50...60hz additionally Included: - Glass And B/w Plastic Plate D=84x5 Mm - Country-specific Power Cable Euro C8 - Dust Cover transillumination Unit M Led - Lower Part For Stand M Led D340xw300xh58 Mm - Led Transillumination Base With Rotatable And Slidable Mirror for Brightfield, Darkfield And Oblique Transillumination - Plain Mirror Side For Crisp, Diffuse Mirror Side For homogeneous Illumination - Easy To Assemble Under Stand M Led, Wireless double Spot Illuminator K Led - Gooseneck Double Spot, 2x 160 Mm For Variable Epiillumination - 2x Thread M24x0.5 For Polarizer - Height Adjustable - For Stands K Edu/lab/mat And Stand M Led analyzer S, Rotatable, D=66 Mm analyzer S, Rotatable, D=66 Mm polarizer Spot K Led polarizer Spot K Led digital Microscopy Camera Axiocam 305 Color R2 (d) microscopy Camera Incl. Driver Software 64bit, Usb 3.0 Pcie X1 Interface, Usb 3.0 Cable 3 M And Ir Barrier Filter Hoya C5000 (coated) Number Of Pixels: 2464 (h) X 2056 (v) = 5.07 Mega Pixel Color Sensor Type: Sony Imx264 Exmor Pregius Global Shutter Cmos Pixel Size: 3.45 μm X 3.45 μm Chip Size: 8.5 Mm X 7.1 Mm, Equivalent To 2/3" (diagonal 11.1 Mm) spectral Range: With Ir Barrier Filter App. 400 Nm To 720 Nm Full Well Capacity: Approx. 10,500 E Selectable Resolution: H X V Binning Factor 2464 X 2056 1x1 Basic Resolution 1232 X 1028 2x2 816 X 684 3x3 608 X 514 4x4 480 X 410 5x5 H X V subsampling Factor 2464 X 2056 1x1 Basic Resolution 1232 X 1028 2x2 Live Frame Rates (depending On Hardware And Software Configuration): H X V Frame Rate@1ms 2464 X 2056 36 Fps 1232 X 1028 88 Fps (2x2 Subsampling) Frame Rates For Time Series Recording (depending On Computer Hardware And software Configuration) H X V (roi) Framerate 2464 X 2056 36 Fps 2048 X 2048 36 Fps 1920 X 1080 67 Fps 1024 X 1024 70 Fps 512 X 512 136 Fps 256 X 256 255 Fps 128 X 128 456 Fps readout Of Sensor Sub-regions ("roi"): Adjustable digitization: 8 And 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 Db) At Typ. 2.2 E Readout Noise Dark Current: <(><<)> 1.0 E/p/s @ 25°c Integration Time: 0.1 Ms To 4 S cooling: Temperature Stable @ 25°c For Ambient temperatures Between 18°c And 30°c Status-led For camera: Color Coded Operation Status, Dimmable Interface (camera): Usb 3.0 Interface Optional Operation With Usb 2.0 Connection At Reduced Frame Rate Optical Interface: C-mount Thread Depth For Objectives: Max. 5 Mm Size / Weight: Approx. App. 10.8 Cm X 7.8 Cm X 4.3 Cm (2.3"x3.2"x1.7") / 580 G Housing: Blue Anodized Aluminum, With Cooling Fins On Top, 1/4" Photo Thread For Tripod Mount Registration: Ce Power Supply: Max. 4w, Power Supply Provided By Usb 3.0 Bus For camera Electronics Environmental Conditions: 5° … +35° celsius, Max 80% Relative Air Humidity, Not Condensing, Free Air Circulation Required Supported Operating Systems: For Zen: Windows 10 X64 Supported Application Software: Zen 3.7 (blue Edition) The Required Application Software Is Available Via The Zeiss Download Center. dust Protection Set M dust Protection Set M Consisting Of Dust Cover (l650xw200xh570 Mm), Eyepiece Cover And Protection Cap For Luminous-field Diaphragm Optics capability Statement/information Sought all Capable Vendors Should Respond With A Brief Capability Statement Demonstrating An Equal Product That Is Manufactured In The United States By August 5, 2024, By 12:00 Pm Est. capabilities Statement Must Also Include The Following Information: 1) Organization Name, Address, Point Of Contact, Email Address, Website Address, Telephone Number, Ue Id# With An Active Sam.gov Registration, And A Tailored Capability Statements Addressing The Particulars Of This Effort, With Appropriate Documentation Supporting Claims Of Capability. submission Instructions interested Businesses Who Consider Themselves Qualified To Provide The Above-listed Items Are Invited To Submit A Response To This Sources Sought Notice By August 5, 2024 At 12:00 Pm Est. All Responses Under This Sources Sought Notice Must Be Submitted Via The Niaid Electronic Simplified Acquisition Submission System (esass) Website Athttps://esass.nih.gov. All Vendors Must Register In The Esass System To Submit Their Documentation. Instructions On How To Register /submit Documents Are Included On The Website. All Responses Received By The Closing Date Of This Synopsis Will Be Considered By The Government. disclaimer And Important Notes this Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. The Government Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. Any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization’s Qualifications To Perform The Work. Respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. After A Review Of The Responses Received, A Pre-solicitation Synopsis And Solicitation May Be Published In Federal Business Opportunities. However, Responses To This Notice Will Not Be Considered Adequate Responses To A Solicitation. confidentiality no Proprietary, Classified, Confidential, Or Sensitive Information Should Be Included In Your Response. The Government Reserves The Right To Use Any Non-proprietary Technical Information In Any Resultant Solicitation(s).

Details: ********amendment 0001******** this Notice Is An Amendment To The Rfi Dated 02 February 2024 In Regards To The Chess Ites-4s Round Table Symposium Held On 13 February 2024. The Following Is Included: pdf Version Of The Rfi Questionnaire link To Mr. Hepworth's Message Video https://youtu.be/wn7eccglflu link To The Briefing Slides https://www.eis.army.mil/sites/default/files/2024-02/ites%204s%20round%20table%20symposium%2013%20feb%202024_ver001.pdf article Synopsis Of The Round Table Event Provided By Peo https://www.eis.army.mil/newsroom/news/enterprise-services/army-chess-holds-ites-4s-roundtable-symposium please Note: Rfi Responses To The Questionnaire Must Be Captured Within The Link Provided (https://forms.osi.apps.mil/r/letznlibjj), Due 2 March 2024. Q&as And Partnering Information Will Be Published On Or Around 16 March 2024. ********end Amendment 0001******* request For Information information Technology Enterprise Solutions 4-services (ites-4s) solicitation Number: W519tc-24-r-xx4s agency: Department Of The Army office: Army Contracting Command-rock Island (acc-ri) description: on Behalf Of Project Lead Computer Hardware Enterprise Software Solutions (pl Chess) Under Program Executive Office, Enterprise Information Systems (peo Eis), Acc-ri Is Issuing This Request For Information (rfi) To Obtain Information From Industry Regarding The Ability To Provide It Services On Behalf Of The Department Of The Army. program Background: ites-3s Is A Decentralized $12b Multiple Award Indefinite Delivery/indefinite Quantity (ma Id/iq) Contract Vehicle Currently Consisting Of 52 Small Businesses And 64 Large Businesses. Ites-3s Contracts Provide Enterprise-level Services For The Army, As Well As Other Defense And Civilian Agencies. The Ites-3s Scope Includes A Full Range Of It Services And Solutions Necessary For The Army To Satisfy Its Support Of Army Enterprise Infostructure And Infrastructure Goals Utilizing It Services Throughout Conus And Oconus Locations, Including Warzone Areas. The Scope Includes The Command, Control, Communications, Computers, And Information Management (c4im) Requirements As Defined In Army Regulations 25-1 (ar-25-1). Additionally, Ites-3s Includes Services And Solutions Necessary For The Army And Other Services To Transition From Current Service-centric Information Environments To The Enterprise Joint Information Environment (jie) As Directed By The Dod Chief Information Officer (cio). The It Services Solutions Are Currently Categorized In The Following Task Areas: It Commercial Cloud Computing; Data Services; Intelligent Automation; Cybersecurity Services; Information Technology Services; Enterprise Design, Integration And Consolidation Services; Network/systems Operation And Maintenance Services; Telecommunications/systems Operation And Maintenance Services; Business Process Reengineering Services; It Supply Chain Management Services And It education & Training Services. Ordering Is Open To Army, Dod And Other Federal Agencies. purpose: the Army Has A Requirement To Provide It Services, As A Follow-on To Ites-3s, To Both The Army Warfighter And Civilians Supporting Army Business Operations. Because Of The Depth And Breadth Of The Services Required To Satisfy It Requirements, The Government Seeks Information And Advice On How To Incorporate Gate Criteria To Eliminate Lengthy Pre-award Evaluation Timeframes And To Provide These Services In A Manner That Will Result In, For Example, Appropriately-qualified Personnel At A Cost That Provides Best Value To Both The Government And The Customer And In A Manner That Is Flexible To The Vendor, E.g., Multiple Contract Suites That Are Narrower In Scope Breaking Out High-level And Low-level Task Areas. this Is An Rfi Looking For Innovative Solutions In It Services And It Services Contracts That Will Enhance The Army Customer's (and Possibly Other Dod And Federal Agencies) Ability To Support Their It Requirements. The Government Is Looking For A Way Of Procuring Services That Could Break Out The Services Into Different Suites Or Catalogs In Accordance With Dod Services Taxonomy. The Government Is Also Seeking Vendor Input Regarding Effective Source Selection Evaluation Criteria That Could Speed Up The Overall Acquisition Process And Timeline. Additionally, The Army Is Re-imagining And Re-branding Chess And Seeking Vendor Input On A Name Change Other Than Ites-4s. the Intent Of This Rfi Is To Conduct Market Research Enabling The Government To Determine Best Approach (e.g., Relevant Contract And Support Structures) For A Follow-on Contract Vehicle To Replace Ites-3s. The Us Army Is Also Seeking To Understand Industry Interest And Relevant Capabilities In Participation In The Concept Described Above, And Any And All Feedback And Comments Via The Attached Questionnaire. this Is A Request For Information Only. This Rfi Is Being Conducted Pursuant To The Federal Acquisition Regulation (far) Subpart 15.201(e). No Contract Will Be Awarded From This Announcement And No Reimbursement Will Be Made For Any Costs Associated With Providing Information Submitted In Response To This Rfi. As Such, This Rfi Is issued Solely For Informational And Planning Purposes And Does Not Constitute Any Obligation On The Part Of The Us Army. not Responding To This Rfi Does Not Preclude Participation In Any Future Rfp Or Solicitation, Should One Be Issued. All Submissions Become Us Army Property And Will Not Be Returned. All Information Received In Response To This Notice That Is Marked 'proprietary' Will Be Handled Accordingly. virtual Round Table Symposium: info: The Government Intends To Host A Virtual Industry Round Table Symposium To Introduce The Re-imagine And Re-branding Of Chess Concept And To Further Discuss And Clarify The Topics Of This Rfi. date: February 13, 2024 time: 10:00am – 12:00pm Est link: Https://einvitations.afit.edu/inv/anim.cfm?i=821743&k=0a63430e7f54 instructions: 1. Follow The Link Below To Complete The Rfi Questionnaire: https://forms.osi.apps.mil/r/letznlibjj rfi Questionnaire Must Be Completed And Submitted By March 2, 2024. 2. Interested Parties Must Rsvp To The Virtual Round Table Symposium By Following The Link (https://einvitations.afit.edu/inv/anim.cfm?i=821743&k=0a63430e7f54). A Microsoft Teams Link Will Be Provided To Those That Rsvp By 12:00pm Est February 12, 2024. acc-ri, Pl Chess, And Peo Eis Have Issued This Survey Solely For Informational And Planning Purposes For The Potential Ites-4s And This Does Not Constitute A Solicitation. Information Provided In Response To This Survey Will Be Used To Assist The Government In Facilitating Decision Making. Submission Of Any Information To This Request Is Purely Voluntary; The Government Assumes No Financial Responsibility For Any Costs Incurred. Telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions. All Submissions Become The Property Of The Us Government And Will Not Be Returned. All Information Received In Response To This Notice That Is Marked ‘proprietary’ Will Be Handled Accordingly. Not Responding To This Rfi Does Not Preclude Participation In Any Future Request For Proposal, If Any Is Issued. If A Solicitation Is Released, It Will Be Posted To The Sam.gov Website. It Is The Responsibility Of The Potential Offerors To Monitor This Site For Additional Information Pertaining To This Requirement.

Details: This Is A Sources Sought Synopsis. This Is A Sources Sought (ss)/request For Information (rfi), Market Survey For Information, To Be Used For Preliminary Planning Purposes In Accordance With (iaw) Federal Acquisition Regulation (far) Part 10, Market Research. This Is Not A Request For Quote (rfq) Or Request For Proposal (rfp). No Contract Award(s) Will Be Made Based On Any Response(s) To This Notice. No Proposals Are Being Requested Or Accepted With This Synopsis. This Is Not A Solicitation For Proposals And No Contract Shall Be Awarded From This Synopsis. the Purpose Of This Notice Is To Conduct Market Research In An Effort To Determine Commerciality, Obtain Competition, And Identify Qualified Potential Sources. Far 6.101(a) States Contracting Officers Shall Promote And Provide For Full And Open Competition In Soliciting Offers And Awarding Government Contracts. this Announcement Will Be Used In An Effort To Promote Full And Open Competition To The Maximum Extent Practicable Iaw Far Subpart 5.201, Far Part 10, Far Part 12, And Far Subpart 6.101. information Requested: The U.s. Amy Contracting Command – Aberdeen Proving Ground (acc-apg) Has Been Tasked To Identify Potential Sources For An Effort That Requires Commercial Standards And Specifications Subscription Services In Support Of The U.s. Army Futures Command (afc), U.s. Army Combat Capabilities Development Command (devcom). army Computer Hardware, Enterprise Software And Solutions (chess) Mandate: The Army Chess Program Is The Army’s Mandatory Source For Information Technology Requirements (hardware And Software) Iaw Afars 5139. However, An Army Chess Statement Of Non-availability (sona) For This Requirement Was Approved On 16 February 2024. contract Type: Firm-fixed-price projected Award Date: 31 May 2024 period Of Performance Shall Be A 12-month Base Period From The Date Of Award And Four (4) 12-month Option Periods. description Of Supplies: The Afc Devcom Has A Requirement For A Commercial Electronic Standards And Specifications Subscription To Provide Support For Afc Devcom’s Professional Scientists, Engineers, And Technical Personnel With The Tools To Support The Afc’s Overall Mission In Research, Development, Engineering, And Testing. The Afc Devcom’s Command Seeks A Single Solution For Purchasing Commercial Standards And Specifications Via A Subscription For Multiple Users To A Consolidated Database. The Electronic Subscription Shall Provide A Searchable Index As Well As Capability For Immediate Digital Download Of The Searchable Data/content Unless The Originator Does Not Produce Them In Digital Form. The Contractor Shall Provide An Electronic Access To A Search Platform For Commercial Standards And Specifications Publications, Parts Information And Lists In Order To Facilitate Afc Devcom’s Mission, And Other Requirements As Deemed Appropriate By Afc Devcom. The Contractor Shall Provide Current And Archived (superseded) Commercial Industry Standards And Specifications For, But Not Limited To, The 25 Standards Developing Organizations (sdos) (listed Below) And An Index To Current And Superseded U.s. Military Standards And Specifications. the Contractor Shall Also Possess And Maintain The Ability To Provide Virtual Access To Documents From Sdos Via The Internet/electronic Database On An As Needed Basis. iaw Public Law 104-133 Sec.12(d)(1), Dod No Longer Creates And Issues Standards And Specifications, But Instead Relies On Sdos To Develop Those Standards. Sdos Are Professional Associations That Write Standards For Their Industry. the Number Of Customer Locations And Simultaneous Users Required For Each Sdo Is Detailed In The Attached Statement Of Work. contractor Shall Provide Digital Access For But Not Limited To The Following 25 Sdos: aia/nas: Aerospace Industries Association/national Aerospace Standards (current Plus Historical) asme With Bpvc: American Society Of Mechanical Engineers, Incl. Boiler & Pressure Vessel Code (current Plus Historical) asq: American Society For Quality assp: American Society Of Safety Professionals astm: American Society For Testing And Materials (current Plus Historical) aws: American Welding Society ieee: Institute Of Electrical And Electronics Engineers (current Plus Historical) ipc: Association Connecting Electronics Industries (formerly Institute For Printed Circuits) iso/ansi: International Organization For Standardization & American National Standards Institute (current Plus Historical) lia: Laser Institute Of America nema: National Electrical Manufacturers Association (current Plus Historical) nfpa: National Fire Protection Association rtca: Radio Technical Commission For Aeronautics sae/ams: Society Of Automotive Engineers - Aerospace Material Specifications sae: Society Of Automotive Engineers (current Plus Historical) sae/arinc: Aeronautical Radio, Incorporated military Standards And Specifications (current Plus Historical) north Atlantic Treaty Organization (nato) Standards limited Sites: aiaa: American Institute Of Aeronautics And Astronautics – 1 Location ashrae: American Society Of Heating, Refrigerating And Air-conditioning Engineers – 2 Locations cga: Compressed Gas Association – 3 Locations iec: International Electrotechnical Commission – 4 Locations pia: Parachute Industry Association – 1 Location tia: Telecommunications Industry Association – 3 Locations ul: Underwriters Laboratories – 4 Locations; Historical For 1 Location Only contractor Shall Also Provide For Digital Access To Specifications For Parts (including Electronics Parts) Used In Dod/army Systems. market Survey the Government Is Requesting That The Prime Contractors Review The Attached Draft Statement Of Work (sow) And Provide A Response To The Government In Accordance With The Below Market Survey Submission Requirements On The Following Questions To Encourage Competition And Exchanges Of Information: please Provide The Following Information: company’s Name: company’s Address: point Of Contact Name And Title: point Of Contact Phone Number: point Of Contract Email: number Of Employees: revenue History: sam Unique Entity Id: cage Code: business Size: (i.e., Large Or Small) bid Intention: (i.e., Yes Or No) please Provide Any Questions, Comments, And Feedback On The Attached Draft Pws And Its Contents. Do Not Include Your Company Name In Your Questions And Answers As The Questions And Answers May Be Released To All Contractors. Also, Please Note Responses To This Notice May Not Be Returned. does Your Company Consider This A Fixed Price (firm-fixed-price (ffp)) Or A Cost Reimbursable (cost-plus-fixed-fee (cpff)) Type Effort? given Your Answer To Item 2a Above: What Type Of Additional Data/metrics/etc. If Any, Would Need To Be Included In The Request For Proposal Package To Be Proposed As A Cpff (term) Or Ffp Effort? if Yes: Can You Submit A Proposal In 14 Calendar Days? if No: Can You Submit A Proposal In 21 Calendar Days? if You Are Interested In Pursuing This Opportunity, Please Submit A Response To The Questions And/or Capabilities Below To Show How Your Company (with Any Similarly Situated Subcontractors If You Are A Small Business) Can Meet The Outlined Requirements In The Draft Pws. sdos And Products: See Rfi Attachment 0002 – Sdo And Product rfi Attachments: 1. Rfi Attachment 0001 – Sow 2. Rfi Attachment 0002 – Sdo And Product response Due Date: email Shall Contain The Following Subject Line: Subject: Rfi Response For Afc/devcom Subscription Services, Solicitation W91zlk-24-r-0013. Responses To This Rfi Are Due No Later Than 03 April 2024 At 1700 Eastern Standard Time And Shall Be Submitted To Both Government Point Of Contacts: ms. Ercilia M. Del Orbe chief, Mission | Contracting Officer e-mail: Ercilia.m.delorbe.civ@army.mil and ms. Michele A. Connolly contract Specialist e-mail: Michele.a.connolly.civ@army.mil confidentiality: No Classified, Confidential, Or Sensitive Information, Or Proprietary Information Shall Be Included In Your Response.

Details: 1.0. Background/introduction. The Purpose Of The 505th Command And Control Wing (505 Ccw) Is To Deliver Command And Control (c2) Dominance. As The Only C2 Wing In The Air Force, The Mission Is To Shape The Way Joint And Coalition Warfighters Execute Command And Control Of Multi-domain Operations Through Experimentation, Training, Testing, Evaluation, Exercises, And Tactics Development. The 505 Ccw Mission Complements The Mission Of The United States Air Force Warfare Center (usafwc) Which Is To Shape The Way Our Force Fights Through Operational Testing, Tactics Development And Advanced Training In Air, Space And Cyberspace At The Operational And Tactical Levels. The 505 Ccw Vision Is To Develop World-class Joint And Collation Warfighters To Achieve And Maintain Command And Control Dominance In Air, Space, And Cyberspace. 505 Ccw Personnel Are Distributed Across 15 States With The Headquarters Residing At Hurlburt Field. 505 Cs Mission Statement. Prepare And Enable The Joint Force To Execute War-winningcommand And Control Of Airpower 2.0. Scope/task Definition. Motorola Solutions Is Delivering A Wave Upgrade, Training, And Service Package To The 505th Communication Squadron. The Upgrade Will Provide The Latest Jitc/dodin-approved Release Of Wave, Including All Patches, Security Fixes, And Added Features. A Wave Certified Integration Engineer (wcie) And A Project Manager Will Be Provided To Assist With The Upgrade. The Upgrade Will Take Place Onsite And Is Expected To Take 56 Hours To Complete. Training Will Be Provided To 505th Communication Squadron Personnel Following The Upgrade, And Two Training Classes (administrator And User) Will Be Held. The Training Will Be Conducted By A Wave Certified Trainer And Will Cover Various Topics. applicable Documents afi 10-251 – Air Force Participation In Joint Training Transformation Initiative (jtti) And Joint National Training Capability (jntc) Events Schedule. 4.0. Deliverables tasks For Each Deliverable motorola Solutions Will Be Responsible For The Following For Installation/configuration: Wave Upgrade Services: provide Onsite Support And Guidance At Hurlburt Field, Fl To Upgrade The Unit’s Existing Wave System. as-built Documentation And System Configuration, Including Network Architecture Diagram, Wave Server Configuration, And Wave Server Admin User Id And Password. install The Wave Jitc-approved Software Release On The New Hardware. backup The Wave Database From The Existing System Before Turning It Off And Re-installing The Database On The New System. upgrade A Few Wave Clients (desktop Or Advanced Desktop) And Teach The Customer How To Do The Rest. install Wave License Specific To The System. confirm Proper Operation Of The Wave System. perform Functional Testing. document System Configuration And Network Topology. Wave Training Services: Two Types Of Training Are Being Provided To Hurlburt Field Personnel As Part Of The Wave Upgrade Package: wave Administrator Training: this Training Will Cover The Following Topics: introduction To Wave And Its Components hurlburt Field-specific Deployment (if Applicable) wave Management Server wave Pc Clients wave Media Server wave Supernodes ip Telephony radio Integration wave Recordings wave Proxy Server wave Deployment Tips And Additional Troubleshooting the Training Will Be Tailored To Hurlburt Field's Current Wave Deployment And Operations And Will Take Place Against The Existing, Upgraded System. wave User Training: this Training Will Cover The Following Topics: wave Desktop Communicator wave Advanced Desktop Communicator wave Web Desktop Communicator the Training Will Focus On The Features And Functionality Of The Wave Software That Are Available To Users, Such As Transmitting On A Talk Group, Using Instant Replay, Sending Text Messages, And Setting Status 5.0. Government Furnished Property/base Support. The Government Will Provide Necessary Workstations, And Computer Hardware And Software In The Customer Facilities As Required In Performance Of This Task Order. 6.0. Security Requirements. The Contractor Shall Provide A Visit Access Request (var) Via Jpas. All Contractor Personnel Involved In Installation And Training Will Possess A Minimum Of A Current Secret Security Clearance. 7.0. Location And Hours Of Work. Accomplishment Of Tasks Required By This Sow Requires Work At Hurlburt Field, Florida. Normal Work Days Are Monday Through Friday Except Us Federal Holidays. Core Hours Of Work Are From 0800 To 1500 Daily. Contractor Employees Are Expected To Be Available During Core Hours. Alternate Work Schedule (aws) May Also Be Available, Approved By The Cor, Contingent Upon No Degradation In Mission Accomplishment And Customer Service. 8.0. Travel Requirements. This Task Does Require The Contractor To Travel. 9.0. Other Considerations. 9.1 Contractor Identification In The Government Workplace. All Contractor/subcontractor Personnel Shall Be Required To Wear 505 Ccw Visitor Badges So As To Distinguish Themselves From Government Employees. When Conversing With Government Personnel During Business Meetings, Over The Telephone Or Via Electronic Mail, Contractor/subcontractor Personnel Shall Identify Themselves As Such To Avoid Situations Arising Where Sensitive Topics Might Be Better Discussed Solely Between Government Employees. Contractors/subcontractors Shall Identify Themselves On Any Attendance Sheet Or Any Coordination Documents They May Review. Electronic Mail Signature Blocks Shall Identify Their Company Affiliation. 9.2 Non-personal Services. The Government Shall Neither Supervise Contractor Employees Nor Control The Method By Which The Contractor Performs The Required Tasks. Under No Circumstances Shall The Government Assign Tasks To, Or Prepare Work Schedules For, Individual Contractor Employees. It Shall Be The Responsibility Of The Contractor To Manage Its Employees And To Guard Against Any Actions That Are Of The Nature Of Personal Services, Or Give The Perception Of Personal Services. If The Contractor Believes That Any Actions Constitute, Or Are Perceived To Constitute Personal Services, It Shall Be The Contractor’s Responsibility To Notify The Contracting Officer Immediately. These Services Shall Not Be Used To Perform Work Of A Policy/decision Making Or Management Nature, I.e., Inherently Governmental Functions. All Decisions Relative To Programs Supported By The Contractor Shall Be The Sole Responsibility Of The Government. 10.0 Business Relations. The Contractor Shall Successfully Integrate And Coordinate All Activity Needed To Execute The Requirement: The Timeliness, Completeness And Quality Of Problem Identification, Corrective Action Plans, Proposal Submittals, Timely Identification Of Issues, Effective/responsive Management Of Subcontractors, Customer Satisfaction, And Professional And Ethical Behavior Of Contractor Personnel. 11.0 Contract Administration. The Contractor Shall Establish Processes And Assign Appropriate Resources To Effectively Administer The Requirement. Duties Include, But Are Not Limited To: Responding To Government Requests For Contractual Actions In A Timely Fashion And Coordinate Between Government And Contractor Personnel Assigned To Support Task Orders; And Assigning Work Effort And Maintaining Proper/accurate Time Keeping Records Of Personnel Assigned To Work On The Requirement. 12.0 Contract Management. The Contractor Shall Establish Clear Organizational Lines Of Authority And Responsibility To Ensure Effective Management And Control Of The Resources Assigned To The Requirement. The Contractor Must Maintain Continuity Between The Support Operations At Customer Locations And The Contractor’s Business Offices. 13.0 Subcontract Management. The Contractor Shall Be Responsible For Any Subcontract Management Necessary To Integrate Work Performed On This Requirement And Shall Be Responsible And Accountable For Subcontractor Performance On This Requirement. 14.0 Government Unique Contractor Personnel Training. 14.1 Training. Contractor Personnel Shall Already Be Proficient In The Skills Specified To Satisfy The Government’s Requirements; However The Government Will Provide Training To Support Unique Requirements. Required Government Training Will Be Defined By The Air Force.

Details: Under Statutory Authority 41 U.s.c. 1901, The Great Lakes Acquisition Center (glac) Intends To Negotiate A Sole Source Contract With Johnson Controls Fire Protection Lp For Maintenance, Inspection, And Monitoring Services On The Fire Alarm System Located At The William S. Middleton Memorial Veterans Hospital 2500 Overlook Terrace, Madison, Wisconsin. Johnson Controls Is The Only Vendor That Has Access To The Proprietary Software On The Current System Which Contains Partitioned Monitoring Which Separates All Campus Buildings To Allow For Appropriate Response From The Fire Department Without Delay. This Procurement Is Being Conducted In Accordance With Far 12 & 13 Single Source Award Justification For Simplified Acquisitions Procedure And No Other Vendor Will Satisfy Agency Requirements. this Acquisition Is Conducted Under The Authority Of 41 U.s.c. 1901 Simplified Acquisition Procedures As Implemented In Far 13.106-3(b)(3)(i), Only One Responsible Source And No Other Supplies Or Services Will Satisfy Agency Requirements. This Will Be A Firm Fixed Price Contract For One 12-month Base Year Contract And Four One-year Options To Be Exercised At The Discretion Of The Government. The Naics Code Is 561621. this Notice Of Intent Is Not A Request For Competitive Quotes. No Solicitation Documents Are Available And Telephone Requests Will Not Be Accepted. However, Any Firm That Believes It Can Meet These Requirements May Give Written Notification To The Contracting Officer By 9:00 Am (local Time) August 8, 2024. Supporting Evidence Must Be Furnished In Sufficient Detail To Demonstrate The Ability To Comply With The Above Requirements (see Also Statement Of Work). Responses Received Will Be Evaluated; However, A Determination By The Government Not To Compete The Proposed Procurement Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. If No Responses Are Received, The Contracting Office Will Proceed With The Sole Source Negotiation With Johnson Controls. information Must Be Sent To The Contracting Officer, Lori.eastmead@va.gov. Telephone Inquiries Will Not Be Accepted. statement Of Work radiation Treatment Planning System Service Contract william S. Middleton Va Medical Center (vamc), 2500 Overlook Terrace, Madison, Wi 53705 summary Of Requirement: Radiation Oncology Uses Highly Technical Equipment To Treat And Manage Cancer Patients. Due To The Complexity Of The Equipment, There Is Need To Maintain Mandatory Safety Upgrades And Modifications To Ensure All Equipment Is Up To Date With The Most Recent Product Versions. The Service Contract Shall Ensure Contractor Aria, Eclipse Software Is Maintained And Inspected Appropriately. This Contract Shall Replace Any Broken Software, Reduce Downtime For Patient Care And Provide The Most Up To Date Equipment. mandatory Upgrades Coverage: Contractor Shall Perform All Mandatory Safety And Reliability Modifications Including Patching Of Operating System Vulnerabilities For The Equipment Covered Under This Agreement During Standard Business Hours. software Upgrade & Associated Training: Contractor Shall Provide All Major Software Upgrade Releases On The Covered Equipment By Installing The Most Recent Production Version. Any Training Associated With The Upgrade Is Covered And Shall Be Provided According To Contractor's Training Guidelines. Whenever Possible, Software Upgrades Shall Be Installed Remotely And Performed During Contractor's Standard Hours. mr (maintenance Releases)/sp (service Packs) And Associated Training: Customer Is Entitled To Receive All Optional Maintenance Releases And Service Packs Released By Contractor For The Covered Equipment. Any Training Associated With Optional Maintenance Releases And Service Packs Is Covered And Shall Be Provided According To Contractor's Training Guidelines. interoperability Upgrades Maintenance: Contractor Shall Maintain The Functionality Of Existing Operations And Interfaces That Were Configured By Contractor For The Customer. Contractor Shall Perform All Modifications And Changes To Existing And Working Interfaces That Are Required Due To A Contractor Software Update Or Upgrade. standard Hours 8am-5pm Local Time (m-f) Contractor Shall Perform The Full Annual Program For The Periodic Maintenance Inspections (pmi) In Accordance With Contractor Specifications. Pmi Shall Be Performed On Weekdays During Contractor's Standard Hours, At Mutually Agreed Upon Dates And Times. The Quantity And Frequency Of The Inspections Shall Depend On The Configuration Of The Covered Equipment extended Hours 5-9 Pm Local Time (m-f) Contractor Shall Provide On-site Field Service Support For The Covered Equipment Monday-friday During Standard Business Hours (8am To 5pm Central Standard Time) And Extended Hours (5pm To 9pm Central Standard Time) For Issues That Cannot Be Resolved By Telephone Or Through Remote Support Via Smartconnect, If Available For The Covered Product And Elected By Customer, For Service Of A Defect Or Error That Cannot Be Resolved By Telephone. Contractor Will Make Commercially Reasonable Efforts To Ensure Response And Availability During Extended Hours (5pm To 9pm Local Time). federal And National Holidays Observed By The Madison Vamc (and Any Other Day Designated As A Federal Holiday By Presidential Decree): new Years' Day Labor Day martin Luther King Day Columbus Day presidents' Day Veterans' Day memorial Day Thanksgiving Day juneteenth Day Christmas Day independence Day any Other Day Specially Declared By The President Of The United States To Be A Federal Holiday. when One Of The Above Designated Federal Holidays Falls On A Sunday, The Following Monday Shall Be Observed As A Federal Holiday. When A Federal Holiday Falls On A Saturday, The Preceding Friday Shall Be Observed As A Federal Holiday By United States Government Agencies. Contractor May Specify Up To Two Days Of Additional Holiday Dates, That Shall Be Prior Disclosed To Cor Upon Contract Award. on-site Emergency Labor: Contractor Shall Provide On-site Emergency Field Service Support For The Covered Equipment And For Issues That Cannot Be Resolved By Telephone Or Through Remote Support. It Is Understood Between The Parties That Emergency Field Service Support Includes Contractor's Standard Hours Of Coverage, Only To The Extent The Number Of Such Visits Remains Within Contractor's Customary Practice. To Qualify As An Emergency Service Event, The Customer Must Declare The Equipment "down," Cease Treatment And Make The Equipment Available To Contractor Service Immediately. Work Performed Outside The Normal Business Hours At The Request Of The Contractor Shall Be Considered Services During Normal Business Hours. Work Outside Normal Business Hours (known As Overtime ) Shall Be Approved By The Contracting Officer (co) Or Madison Vamc Poc. Contractor Shall Obtain Prior Authorization From Cor, And Time And Material (t&m) Purchase Order (po) Before Delivering Any Services Outside Of Scope Of The Service Contract, Which Includes Any Work Performed Outside Normal Business Hours Specified Above. parts Coverage It Equipment: Contractor Shall Supply All Parts Necessary To Keep The Contractor Software System Related To The Covered Equipment Functioning Properly. Contractor Shall Supply Parts Only For Computer Hardware Purchased From, Delivered, And Installed By Contractor. remote Access: For Contractor Software Products That Require Remote Access, Customer Must Have A Remote Access (smartconnect) Connection Enabled. Contractor Shall Provide Remote Diagnostics And Support During Contractor's Standard Hours For Service Of A Defect Or An Error That Cannot Be Resolved By Telephone Or E-mail. refresher Training - 1 Day: Annual Refresher Training Shall Be Provided By Contractor In Any Year That A Software Upgrade Is Not Released, Contractor Shall Provide Refresher Training Via The Internet, Through Multi-media (e.g., Dvd), Or On-site, As Specified By Contractor. On-site Annual Refresher Training Is Limited To One Training Event Per Year, And Unused Training Credits Do Not Roll Over. during Years That A Software Upgrade Is Released, The Upgrade Training Shall Be Applied To The Available Number Of Annual Refresher Days. Should The Upgrade Require Additional Days Beyond Those Available It Shall Be Provided At No Additional Charge.

Description: * Refer To Gk12500285 Equipment To Be Compatible With Existing Hytera (rf Comms) And Ubiquiti Unifi (ip Comms) Equipment Radio Rf Communication Supplier Support 8 Hrs Spectrum License Application Support (for Hr655h, Hr1065u1, Wireless Link Rf), Supplier To Assist With Technical Support To Advise On And Assist With The Motivation, Preparation And Completion Of The Documentation In Terms Of Icasa Spectrum License Application. Repeaters <(>&<)> Duplexers Ordered To Align With Approved Icasa Repeaters Licence Contact Person: Anton Visser 082 312 5176 Delivery Address: Melkbosstrand Neighbourhood Watch 1 Beach Road Melkbosstrand 7441 * Equipment To Be Compatible With Existing Hytera (rf Comms) And Ubiquiti Unifi (ip Comms) Equipment Radio Rf Communication Equipment Uhf Dmr Repeater Repeater To Be Supplied Programmed And Balanced With Allocated Icasa Frequencies. Supplier To Provide Programming Software, User Guides And Manuals, Licence Keys, Passwords And Appropriate "programming" Cable Check If Not Already Under The Cables Section In This Document. 1 Unit Hytera Hr1065 U1 Repeater Ultra-thin Dmr Repeater 400-470 Mhz Uhf Enhanced Version With Built-in Mains Ps. Or Equivalent 1 Unit Hytera Dt27 Duplex Unit Complete Machine With All The Cables And Rack Mount Kit, 400 # 470 Mhz Il=1.5db Isolation75db Power : 50w Sma Or Equivalent 1 Unit Hytera Sm16a1 Handheld Microphone Or Equivalent 1 Unit Hytera Licence Repeater Ip Connect / Mobile Ip Transit Or Equivalent Contact Person: Anton Visser 082 312 5176 Delivery Address: Melkbosstrand Neighbourhood Watch 1 Beach Road Melkbosstrand 7441 * Equipment To Be Compatible With Existing Hytera (rf Comms) And Ubiquiti Unifi (ip Comms) Equipment Transportable Dmr Repeater Repeater To Be Supplied Programmed And Balanced With Allocated Icasa Frequencies. Supplier To Provide Programming Software, User Guides And Manuals, Licence Keys, Passwords And Add Appropriate "programming" Cable Check If Not Already Under The Cables Section In This Document. 1 Unit Hytera Hr655h U1 # 400-470 Mhz, High Power 1/25w, Dmr Tier Ii Ordered With Built-in Hytera Installed Duplexer. Or Equivalent 1 Unit Hytera Licences - Ip Connect / Mobile Ip Transit, Sfr <(>&<)> Full-duplex Or Equivalent 1 Unit Hytera Hr650 Series Li-ion Battery Pack (air Freight) Bl9915 12500mah 14.4v Hytera Logo Ip67 (rohs) (reach) Or Equivalent 1 Unit Hytera Bracket Kit Brk36 Wall Mounted Hytera Logo Finished (rohs) (reach) Or Equivalent 1 Unit Hytera Md650 Remote Speaker Microphone With Lcd, Sm25a1 00 (rohs) Or Equivalent 1 Unit Hytera Nylon Backpack Kit For Hr650 Ncn035 Hytera (rohs) (reach) Or Equivalent 1 Unit Hytera Ac/dc Power Adapter Ps8002 Hytera Logo 100~240vac/2a 16.8v/8a [european Standard] Level 6 (including European Standard Power Cord) (rohs) (reach) Or Equivalent 1 Unit Hytera Uhf An04x Antenna (to Mount On Repeater For Portable Use), Select And Tune Antenna To Allocated Icasa Frequencies Or Equivalent Supplier To Provide Programming Software And Appropriate Data Cable As Under The Cables Section Contact Person: Anton Visser 082 312 5176 Delivery Address: Melkbosstrand Neighbourhood Watch 1 Beach Road Melkbosstrand 7441 * Equipment To Be Compatible With Existing Hytera (rf Comms) And Ubiquiti Unifi (ip Comms) Equipment Wireless Link Rf (for Repeaters) Terminal Devices To Be Supplied Programmed To Work With Supplied Repeaters, Supplied With Programming Software, User Guides And Manuals, Licence Keys, Passwords And Appropriate "programming" Cable Check If Not Already Under The Cables Section In This Document. 2 Units Hytera Hm785hg Bt Uv # Uhf 350-470 Mhz, High Power, Rsm (sm16a1), Gps, Bt 5.0, Dmr Tier Ii <(>&<)> Analogue, Or Equivalent 2 Units Hytera Licences - Ip Connect / Mobile Ip Transit, Sfr <(>&<)> Full-duplex Or Equivalent 1 Unit Hytera Back To Back Interface Cable Hytera Hm785hg To Hr1065u1 Or Equivalent 1 Unit Hytera Back To Back Interface Cable Hytera Hm785hg To Hr655 Or Equivalent 2 Unit Webb Industries Yagi 3-element Antennas 7 Db Or Equivalent. (for Allocated Frequency) Contact Person: Anton Visser 082 312 5176 Delivery Address: Melkbosstrand Neighbourhood Watch 1 Beach Road Melkbosstrand 7441 * Equipment To Be Compatible With Existing Hytera (rf Comms) And Ubiquiti Unifi (ip Comms) Equipment Terminal Devices Terminal Devices To Be Supplied Programmed To Work With Supplied Repeaters, Supplied With Programming Software, User Guides And Manuals, Licence Keys, Passwords And Appropriate "programming" Cable Check If Not Already Under The Cables Section In This Document. 3 Units Hytera Hm785hg Bt Uv # Uhf 350-470 Mhz, High Power, Rsm (sm16a1), Gps, Bt 5.0, Dmr Tier Ii <(>&<)> Analogue Or Equivalent 1 Unit Hytera Hm785hg Bt V1 # Vhf 136-174 Mhz, High Power, Rsm (sm16a1), Gps, Bt 5.0, Dmr Tier Ii <(>&<)> Analogue Or Equivalent 4 Units Hytera Licences - Ip Connect / Mobile Ip Transit, Sfr <(>&<)> Full-duplex Or Equivalent 3 Units Hytera Mnc360 Poc Mobile Radio, Dual-sim, Lcd, Gps, Bt, Wi-fi, 4w Speaker, Android, Nfc Or Equivalent 2 Units Hytera External Power Supply (220w), Input Voltage 100-240 Vac, Output Voltage 13.8 V Dc ±1.0% Ps22002, Or Equivalent Contact Person: Anton Visser 082 312 5176 Delivery Address: Melkbosstrand Neighbourhood Watch 1 Beach Road Melkbosstrand 7441 * Equipment To Be Compatible With Existing Hytera (rf Comms) And Ubiquiti Unifi (ip Comms) Equipment Hytera Cables Or Equivalent 1 Unit Hytera Pc47 Programming Cable (hr1065u1 <(>&<)> Hr655h) Or Equivalent 1 Unit Hytera Pc37 Programming Cable Or Equivalent 1 Unit Hytera Pc152 Programming Cable (hr785, Hr705 <(>&<)> Hp505 Dmr) Or Equivalent 1 Unit Hytera Pc40 (db26/usb) Or Equivalent 1 Unit Hytera Pc91 Cable Or Equivalent 3 Units Hytera Back To Back Interface Cable Hm785hg To Mnc360 Same As Used In Hytera Bn100 Hytalk Pmr Gateway Or Equivalent 2 Units Hytera Back To Back Interface Cable Hm785hg To Hm785hg Or Equivalent Contact Person: Anton Visser 082 312 5176 Delivery Address: Melkbosstrand Neighbourhood Watch 1 Beach Road Melkbosstrand 7441 * Equipment To Be Compatible With Existing Hytera (rf Comms) And Ubiquiti Unifi (ip Comms) Equipment Ip Network Communication Equipment 2 Units Ubiquiti 802.3af To 24vdc Gigabit Outdoor Adapter | Ins-3af-o-g Or Equivalent 2 Units Ubiquiti Uisp 60ghz/5ghz Wave Long Range Radio | Wave-lr Or Equivalent 2 Units Ubiquiti Unifi Ultra 210w Poe Switch | Usw-ultra-210w Or Equivalent 1 Units Ubiquiti Multi-wan Unifi Cloud Gateway Ultra | Ucg-ultra Or Equivalent 1 Units Ubiquiti Unifi Express Wifi 6 Cloud Gateway Router | Ux Or Equivalent 1 Unit Ubiquiti Unifi6 Long Range Dual Band Wifi 6 Ap | U6-lr Or Equivalent 2 Units Ubiquiti Unifi Lte Pro Wired Lte Back-up | U-lte-pro Or Equivalent 1 Units Ubiquiti Unifi Mobile Router Industrial | Umr-industrial Or Equivalent 1 Units Ubiquiti Unifi Switch Ultra 8 Port Gigabit 1poe Input 7 Poe Out | Usw-ultra Or Equivalent 1 Units Equinox Heavy Duty Speaker Winch Stand (4m, 60kg) Adjustable Speaker Pole 35mm, Foldable Legs. Or Equivalent 1 Unit Mikrotik Mant Lte 5o 5dbi Omni Antenna | Mtao-lte-5d-sq, Or Equivalent 2 Unit Mikrotik 7m Sma Male To Sma Male Cable Wl-smam-7 Or Equivalent Contact Person: Anton Visser 082 312 5176 Delivery Address: Melkbosstrand Neighbourhood Watch 1 Beach Road Melkbosstrand 7441 * Equipment To Be Compatible With Existing Hytera (rf Comms) And Ubiquiti Unifi (ip Comms) Equipment Lora Communication Equipment 2 Units Rak Wismesh Pocket Eu868 Or Equivalent 2 Units Rak Wisblock Meshtastic Starter Kit Eu868 Sku:115017 Or Equivalent 2 Units Rak Wisblock Unify Enclosure Ip67 150x100x45mm Sku:910421 Or Equivalent 2 Units Rak Pole Mounting Vertical Kit (type A) Sku:910247 Or Equivalent 2 Units Rak Rak12500 Gnss Location Module Sku:110016 Or Equivalent 2 Units Rak19004 Green Power Module 12v Texas Instruments Tps55165-q1 Sku:110049 Or Equivalent 2 Units Rak5814 Encryption Module Microchip Atecc608a Sku:100186 Or Equivalent 2 Units Rak13800 Ethernet Module Wiznet W5100s-l Sku:100076 Or Equivalent 2 Units Rak19018 Poe Module Silvertel Ag9905mt For Rak13800 Sku:100095 Or Equivalent 2 Units Flat 3.7v 2000mah Rechargeable Lithium Polymer 803860 Battery With Jst Type Ph 2.0 Plug Or Equivalent 2 Units Mcgill 9dbi Lora Antenna (eu868), Or Equivalent. 2 Units Pigtail Low Loss Cable For Lora Antenna To Wisblock Unify Enclosure Sma Connector 1m Or Equivalent Contact Person: Anton Visser 082 312 5176 Delivery Address: Melkbosstrand Neighbourhood Watch 1 Beach Road Melkbosstrand 7441 * Equipment To Be Compatible With Existing Hytera (rf Comms) And Ubiquiti Unifi (ip Comms) Equipment Computer Hardware 1 Unit Dell Optiplex 3070 Core I3-9100t 4gb Ram 500gb Hdd Win 10 Pro Mini Pc N003o3070mff, With Windows 11. Or Equivalent Contact Person: Anton Visser 082 312 5176 Delivery Address: Melkbosstrand Neighbourhood Watch 1 Beach Road Melkbosstrand 7441 * Equipment To Be Compatible With Existing Hytera (rf Comms) And Ubiquiti Unifi (ip Comms) Equipment Transportable Repeater / Lte (backup Power) 1 Unit Gizzu 296wh Portable Power Station 1 X 3 Prong Sa Plug Point Or Equivalent Contact Person: Anton Visser 082 312 5176 Delivery Address: Melkbosstrand Neighbourhood Watch 1 Beach Road Melkbosstrand 7441 * Equipment To Be Compatible With Existing Hytera (rf Comms) And Ubiquiti Unifi (ip Comms) Equipment Hytera Hr1065 U1 (backup Power) Or Equivalent 2 Units Sonx Sx-lfp12.8v 108ah Drop In Lifepo4 Lithium Battery, Or Equivalent 1 Units Victron Blue Smart Ip22 Charger 12v 20a 3 Outputs Or Equivalent Contact Person: Anton Visser 082 312 5176 Delivery Address: Melkbosstrand Neighbourhood Watch 1 Beach Road Melkbosstrand 7441 * Equipment To Be Compatible With Existing Hytera (rf Comms) And Ubiquiti Unifi (ip Comms) Equipment Installation And Setup Of The Equipment Contact Person: Anton Visser 082 312 5176 Delivery Address: Melkbosstrand Neighbourhood Watch 1 Beach Road Melkbosstrand 7441 Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Allocation Of Preference Points *nb: The Municipal Bidding Document 6.1 (mbd 6.1) Has Been Amended, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission. In Order To Qualify For Preference Points, It Is The Responsibility Of The Bidder To: Submit A Duly Completed Mbd 6.1 Form (bidders Must Indicate How They Claim Points For Each Specific Goal). Submit Documentary Proof Of Updated Bbbee Certificate/sworn Affidavit And/or Cipc Certificate With Each Rfq Submission To Validate Specific Goals. (if A Bidder Is Registered And Active On The City#s Supplier Database And Has Submitted The Bbbee Certificate/ Sworn Affidavit/ Cipc Certificate, The Submission Of Said Documents Is Not Necessary). It Is Therefore Incumbent On Suppliers To Ensure That Documents Are Kept Updated. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times***

Details: Request for Quotation_Computer Hardware Acquisition_Unipod & Computer Hardware and Equipment Acquisition Please indicate if you intend to submit a bid by creating a draft response without submitting it directly into the system. This will allow the system to send notifications in case the bid requirements are changed. If you require further clarification, please contact us using the system's messaging function. Bids should be submitted directly into the system by following this link: http://supplier.quantum.partneragencies.org/ Using the profile you have on the portal. If you have never registered before, you can register a profile using the registration link shared via the job advertisement and following the instructions in the guides available on the UNDP website: https://www.undp.org/procurement/business/resources-for-bidders. Do not create a new profile if you already have one. Use the Forgotten Password feature in case you do not remember the password or username from the previous registration. UNDP Office Burkina Faso Procurement Unit