Cleaning Tenders

Details: Description Request For Quotation Supply, Delivery, And Installation Of Conference Microphones For The Court Of Appeals Amp-005-24 (svp) - A Sir/madam: Please Quote Your Best Proposal For The Item/s Described Below Using The Price Quotation Form (see Annex "a"), Subject To Terms And Conditions Stated Herein. Lot No. Qty. Item Description Approved Budget For The Contract 1 1 Lot Conference Microphones ₱523,500.00 *the Abc Is Understood To Be The Ceiling Price; Offers Must Not Exceed The Abc Provided. The Quotation Duly Signed By You Or Your Duly Authorized Representative, Accompanied By Required Forms, Shall Be Submitted Not Later Than 12 November 2024; 10:00 Am At The Address Indicated Below: Atty. Rey B. Pulicay Secretariat, Bids And Awards Committee (bac) 3rd Floor, Centennial Building Court Of Appeals Ma. Orosa St., Ermita, Manila Bacsecretariat.ca@judiciary.gov.ph Only One (1) Set Of Documents Certified To Be True Copies Of The Original Shall Be Required. The Envelope Shall Contain The Name Of The Contract To Be Bid In Capital Letters And Bear The Name And Address Of The Supplier In Capital Letters. Quotations And Other Documents Required May Either Be Submitted Manually At 3rd Floor Office Of The Bac Secretariat, Centennial Building, Court Of Appeals, Ermita, Manila Or Electronically To Bacsecretariat.ca@judiciary.gov.ph On Or Before The Deadline Of Submission As Stated In This Rfq. In Case Of Modification, It Must Be Done Before The Deadline For The Submission And Receipt Of Quotations And Labelled As A “modification”. The Time Stamped Or Indicated In The Latest Proposal Received Shall Be The Official Time Of Submission. The Bac Shall Assume No Responsibility For The Misplacement Of The Contents Of The Improperly Sealed Or Marked Bid, Or Submission Of Corrupted Files, Or For Its Premature Opening. Late Submission Of Quotations Shall Not Be Accepted And Considered. Sgd. J. Walter S. Ong Associate Justice Co-chairperson, Bids And Awards Committee The Price Quotation Form (annex “a”) And The Following Eligibility Requirements Shall Be Submitted On Or Before The Deadline For Submission And Receipt Of Quotation. No Requirements Instruction 1 Price Quotation Form (annex “a”) Must Indicate The Unit And Total Price. Must Indicate The Required Information. Must Be Duly Signed By The Authorized Representative. 2 Mayor’s Permit For The Year 2024 Must Be Valid For The Year 2024 3 Philgeps Registration Number Submit Proof Of Registration (picture Or Screenshot Of Philgeps Registration On The Website) 4 Omnibus Sworn Statement (annex “b”) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Ensure That There Are Eleven (11) Declarations. Indicate Required Information. Attach Competent Evidence Of Identification (valid Government-issued Id. The Use Of Cedula Is Not Acceptable). Must Be Duly Notarized And Signed. 5 I. Income Tax Return For The Year 2023; And Ii. Latest Value Added Tax Returns (form 2550q) Or Percentage Tax Returns (form 2551q) Covering The Last Six (6) Months Prior To The Opening Of Quotations. The Income And Business Tax Returns Should Have Been Filed Through The Electronic Filing And Payment System (efps) Stamped Received By The Bir. Philgeps Platinum Registration Certificate With Updated Annex A May Be Submitted In Lieu Of The Eligibility Documents 2 And 3. Terms And Conditions: 1. Quotations Exceeding The Abc Or Submitted Beyond The Deadline Shall Be Rejected. 2. Price Quotation/s — To Be Denominated In Philippine Peso — Shall Include All Taxes, Duties, And/or Applicable Discounts, If Any. 3. Award Of Contract Shall Be Made To The Lowest Quotation Which Complies With The Technical Specifications, Requirements And Other Terms And Conditions Stated Herein. 4. In Case Two Or More Bidders Are Determined To Have Submitted The Lowest Calculated And Responsive Quotation, The Court Of Appeals Shall Adopt And Employ “draw Lots” As The Tie-breaking Method To Finally Determine The Winning Bidder In Accordance With Gppb Circular No. 06-2005. 5. The Court Of Appeals May Cancel Or Terminate The Contract At Any Time Under Any Of The Grounds Provided Under Ra No. 9184 And Its 2016 Revised Irr. 6. The Rfq, Purchase Order (contract), And Other Related Documents To The Above-stated Procurement Project Shall Be Deemed To Form Part Of The Contract. 7. The Notice Of Award, Letter Order, And Notice To Proceed Are Deemed Received As Of The Date Of Their Transmittal To The Winning Bidder’s Official Email Address, As Provided In The Omnibus Sworn Statement. Hence, The Relevant Periods Under Ra No. 9184 And Its Irr, And The Rfq Shall Commence From Receipt Thereof. 8. Liquidated Damages Equivalent To One-tenth Of One Percent (0.1%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. The Court Of Appeals May Terminate The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. 9. Payment Shall Be Made After Delivery And Only Upon The Submission Of The Required Supporting Documents, I.e. Delivery Receipt And Sales Invoice Or Official Receipt, By The Supplier, Contractor, Or Consultant. Annex "a" Price Quotation Form Date: _____________ The Chairperson, Bids And Awards Committee Court Of Appeals Ma. Orosa St., Ermita, Manila Ma’am/sir: Having Examined The Request For Quotation No. Amp-005-24 (svp) The Receipt Of Which Is Hereby Duly Acknowledged, The Undersigned Offers The Supply, Delivery, And Installation Of Conference Microphones For The Court Of Appeals In Conformity With The Said Request For Quotation For The Sums Stated Hereunder: Lot No. Qty Item Description Unit Price Total Price 1 1 Lot Conference Microphones Total Price In Words: ______________________________________________________________ Technical Specifications Must Comply With The Following Minimum Requirements: Session Hall No. Qty. Uom Description 1 2 Unit Main Unit Control 2 90 Unit Conference Microphone, Long Stem, Delegate 3 30 Piece 5 Meters Conference Microphone Cable Alex Reyes Conference Hall 1 1 Unit Main Unit Control 2 9 Unit Conference Microphone, Long Stem, Delegate 3 4 Piece 5 Meters Conference Microphone Cable Paras Hall 1 1 Unit Main Unit Control 2 9 Unit Conference Microphone, Long Stem, Delegate 3 3 Piece 5 Meters Conference Microphone Cable 2nd Floor Hearing Room, Centennial Building 1 1 Unit Main Unit Control 2 9 Unit Conference Microphone, Long Stem, Delegate 3 3 Piece 5 Meters Conference Microphone Cable Annex 6 Conference Room 1 1 Unit Main Unit Control 2 9 Unit Conference Microphone, Long Stem, Delegate 3 3 Piece 5 Meters Conference Microphone Cable Scope Of Work: 1. Mobilization Of Manpower, Materials, And Tools/equipment; 2. Dismantling Of Carpet; 3. Removal Of Old Microphone Cables; 4. Reinstallation Of Carpet; 5. Cleaning Of The Working Area; 6. Testing And Commissioning. Technical Specifications: 1. Main Control Unit A. With Record And Play Function Thru Usb/sd With Fm Tuner; B. Equipped With 3 Groups For Connecting For Workable For 29 Units For Each Group; C. Single, Multiple And Many Groups Can Be Used Simultaneously; D. Rack Mountable Main Unit, Including Rack Mounting Ears; E. Output Level Led Indicator; F. Line Volume For The Unit Source; G. Mic Volume For The External Mic Connection; H. Master Volume Control The Line Mic Level; I. Balanced Xlr Output; J. Extension To Other Main Unit In Case Will Use More Than 60 Units Conference Mic. 2. Delegate Unit A. Mic On/off Buttons; B. Built-in 2w Speaker; C. Volume Control; D. Unidirectional Condenser Mic; E. Red Light Indicate Mic Is On. 3. 1 Year On Parts And Labor Schedule Of Requirements/delivery Instructions Within Thirty (30) Calendar Days From Receipt Of Notice To Proceed Delivery Site: Court Of Appeals Ma. Orosa St., Ermita, Manila Contact Person: Ms. Cheryl Joy D. Dean Chief, Property And Supply Management Division By Affixing My Signature Below, I Am Confirming Our Compliance With The Technical Specifications/terms Of Reference Stated Above. I Further Certify That Such Compliance Is True And Correct; Otherwise, If Found To Be False Either During The Bid Evaluation Or Post-qualification, The Same Shall Give Rise To Automatic Disqualification Of Our Bid. We Undertake, If Our Quotation Is Accepted, To Perform The Services/deliver The Goods In Accordance With The Schedule Of Requirements And Technical Specifications. Until A Formal Contract Is Prepared And Executed, This Quotation, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Or Any Quotation You May Receive. Date Company Name Authorized Representative Name/signature Address Official Contact Number Annex “b” Omnibus Sworn Statement (revised) Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity; 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code; 11. [name Of Bidder] Hereby Assigns The Following Contact Number/s And E-mail Address/es As The Official Telephone/fax Number And Contact Reference Of The Company Where The Ps Bac And Ps Notices May Be Transmitted. Telephone No/s.: ________________________________ Fax No/s.: ________________________________ E-mail Add/s.: ________________________________ Mobile No.: ________________________________ It Is Understood That Notices/s Transmitted In Any Of The Above-stated Telephone/fax Numbers And/or E-mail Address/es Are Deemed Received As Of Its Transmittal And The Reckoning Period For The Reglementary Periods Stated In The Bidding Documents And The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 Shall Commence From Receipt Thereof. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Known To Me, And Known To Be The Same Person/s In The Exhibited [insert Type Of Government Identification Card Used*], With His/her Photograph And Signature Appearing Thereon, With No.________________________ Issued On ______________________ At ____________________. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission ___________ Notary Public For ______ Until _______ Roll Of Attorney's No. _____________ Ptr No. _______ [date Issued], [place Issued] Ibp No. _______ [date Issued], [place Issued] Doc. No. ______ Page No. ______ Book No. _____ Series Of _____.

Details: Description Contract Duration: January 1, 2025 To December 31, 2025 Ii. Scope Of Work Provision –the Contractor Shall Provide On Call Basis Additional Manpower On Occasions Where Necessary As Requested By Pnoc Esb Management. The Augmentation Must Be Covered By A Request Order From Esb Management Indicating Therein The Number Of Personnel, Position And Duration Of The Service To Be Rendered. A. Duties, Responsibilities And Qualifications: 1. Leadman/foreman O Possess The Necessary Leadership Skills. O Control And Supervise Contractor’s Personnel Assigned To Pnoc - Energy Supply Base With Regard To The Details, Manner And Procedures Of Their Performance. O Responsible For Coordinating With Pnoc Esb Personnel In Providing The Manpower Requirements Together With The Assigned Tasks. O Coordinate With Pnoc Esb Personnel As To The Program Of Works And The Necessary Materials, Tools And Equipment In Accordance With The Company Health, Safety Security And Environmental Regulations. O Supervise And Prepare Daily And Weekly Report On The Accomplishment Of The Group Of Individual In Their Respective Area Of Assignment. O Supervise All The Assigned Personnel To Various Projects And Submits Daily Accomplishment Report To Pnoc Esb Personnel. O Inspect, Monitor/supervise And Prepare Report On The Projects And Or Activities Being Implemented. O Responsible For Safekeeping And Maintenance Of Tools And Equipment That Pnoc Esb And The Contractor Have Provided. O Responsible For The Daily Attendance And Monitoring Of Punctuality Of Contractor’s Personnel. O Perform Other Assigned Tasks And Other Related Works. O Experienced, Respected & Skillful In Dock Work Operation, Warehousing Operation, Facility Maintenance And Other General Services. O Could Work With Minimum Supervision. O Could Write Good Reports. O Hardworking. O Must Be Graduate Of Any Engineering Course. 2. Skilled Workers A. Carpenter / Mason O Perform Carpentry / Masonry / Tin Smiting Works. O The Work Includes Renovation, Repair And Maintenance Of Base Facilities Such As Warehouse, Admin Building And Other Related Structures. O Must Have The Basic Tools Of A Carpenter O Perform Other Duties As May Be Necessary. B. Electrician O Handle The Repair / Maintenance Of Electrical Installations And Fixtures And Other Related Works. O Knowledgeable In Basic Electrical Diagrams / Lay-out. O Must Have The Basic Tools Of An Electrician O Act As Truck Scale Attendant As The Need Arises. O Perform Other Duties As May Be Necessary. O Act As A Truck Scale Attendant/personnel (5:00pm – 8:00am Or As The Need Arises) O Must Possess Certification From Accredited Government Agencies. O Could Work With Minimum Supervision. C. Nc Ii Certified Welder O Handle Welding Jobs As Required By Esb And Its Clients. O Handle The Fabrication, Installation And Repair Of Various Facilities/structures, Etc. O Perform Minor Auto/vehicle Welding Works, And Other Iron Works. O Perform Other Duties As May Be Necessary. O Must Possess Certification From Accredited Government Agencies. D. Aircon Technician O Perform General Cleaning And Check-up Of Air Conditioning Units. O Conduct Regular Preventive Maintenance Inspections Of Air Conditioning Units. O Perform Check-up Of Electrical Wiring / Connections Of Air Conditioning Units. O Repair Or Replace Defective Parts In Units And Equipment And Their Controls. O Perform Check-up Of Freon & Recharging As Needed. O Perform Other Duties As May Be Necessary. O Must Possess Certification From Accredited Government Agencies. E. Operations Staff O Assist In Filing Of Operations-related Documents Such As Job Order, Vessel Service Sheet, Gate Pass, Etc. O Provide Assistance In Documentation, Filing And Encoding Of Vessels, Equipment Time Sheet And Other Operational Activities At Esb. O Assist Esb’s Fuel Trading Operations Such As: Monitoring & Follow-up Of Fuel Orders, Preparation Of Fuel Delivery Report, Fuel Quotation To Clients. O Provide Assistance To Other Esb Staff On Other Works Such As Sorting, Serving, Batching Of Billing And Payments, Filing, Encoding And Preparation Of Other Reports. O Maintain Operations Communication Records Between Pnoc, Its Clients And Service Providers. O Assist In Canvassing Of Materials & Services Needed For Esb Operations. O Maintain Cleanliness And Good Housekeeping In The Assigned Workplace. O Perform Other Assigned Tasks. O Could Work With Minimum Supervision. O Must Be College Graduate And Computer Literate. F. Nc Ii Certified Heavy Equipment Operator / Driver O Capable Of Operating And Handling Minor Repair Of Heavy Equipment Such As Trailer Truck, Ten-wheeler Truck, Forklift, Wheel Loader Etc. O Must Be Knowledgeable In Handling Light And Heavy Vehicles. O Must Possess Valid Professional Driver’s License With Appropriate Restriction Code. O Could Travel Anywhere In Luzon, Particularly In Metro Manila. O Shall Perform Duties Of Service Vehicle Driver As May Be Required. O Perform Other Assigned Tasks And Other Related Works. O With Certification From Training Agencies For Operation Of Heavy Equipment. O Must Be At Least High School Or 2-year Vocational Course Graduate. 3. Semi-skilled Workers A. Checker O Assist In The Preparation Of Documents Such As Job Order, Vessel Service Sheet, Gate Pass, Etc. O Assist In The Documentation Of Incoming And Outgoing Vessels, Cargoes, Warehouse Stocks, Etc. In Coordination With The On-duty Shift Engineer. O Assist In The Monitoring Incoming Provisions, Incoming Rented Heavy Equipment And Third Party Contractor Services, And Report To The On-duty Shift Engineer. O Perform Photocopying Requirements/documents Of Esb Office, Its Clients And Other Copying Requirements. O Assist In The Monitoring Of Incoming And Outgoing Cargoes. O Perform Assigned Tasks. O Could Work With The Minimum Supervision. O Proficient In Typing And Computer Literate. O Must Be At Least 2nd Year College Level. B. Service Driver O Render Driving Services To Cater Company Day To Day Requirements, I.e. Banking Services, Gsis, Bir, Other Business Transactions, Deliveries Of Documents To Pnoc Head Office And Pnoc Esb Clients And Government Offices And Other Messengerial Services When Necessary. O Drivers Must Be Knowledgeable In Handling Light And Heavy Vehicles. O Drivers Must Be Knowledgeable In Minor Trouble Shooting/repair Of Light & Heavy Vehicles. O Must Possess The Valid Professional Driver’s License. O Must Have Training On Defensive Driving From Lto Accredited Service Provider. O Could Travel Anywhere In Luzon, Particularly In Metro Manila. O Ensure Cleanliness Of The Assigned Service Vehicle. O Perform Other Assigned Tasks And Other Related Works. O Must Be At Least High School Graduate. C. Plumber O Handle The Installation, Repair And Maintenance Of Water Pipelines Complete With Appurtenances, Fittings And Fixtures (e.g. Faucets, Etc.). O Must Also Be Knowledgeable In Installation, Repair And Maintenance Of Sanitary & Sewage Pipelines (e.g. Water Closets, Lavatories, Floor Drains, Etc.). O Must Have The Basic Tools Of A Plumber O Act As A Fuel/water Tender And Rigger As The Need Arises. O Perform Other Assigned Tasks And Other Related Works. D. Roustabout / Rigger O Assist The Crane Operator In Loading / Unloading And Stock Piling Of Cargoes At The Pier/wharf, Warehouse And Yard. O Act As Fuel/water Tender, Line Gang, Truck Scaler And Others. O Assist In The Construction And Maintenance Of Esb Facilities Such As Carpentry, Masonry, Tinsmitting, Plumbing Works, Painting, Etc. O Perform Other Assigned Tasks And Other Related Works. O With Relevant Training On Rigging, Lifting, Etc. E. Truck Scale Attendant / Personnel O Operation Of Truck Scale. O Prepare Documentary Requirements For The Position. O Perform Necessary Safekeeping And Assist In The Maintenance Of The Unit. O Perform Other Assigned Tasks And Other Related Works. 4. Registered Nurse The Contractor Shall Provide One (1) Registered Nurse With Updated Prc License Who Shall Report To Esb Clinic Regularly For Eight (8) Hours A Day, Six (6) Days A Week. The Registered Nurse Shall Have The Following Duties: O Provide Primary Care For The Sick And The Injured Employees, Dependents, Personnel And Clients Of Esb By The Administration Of Drugs And Emergency Treatment Of Injuries; O Take Charge Of The Daily Administration Of The Esb Clinic, Including The Arrangement Of The Work Schedules And Maintenance Of The Record Of The Patients; O Refer The Patients To An Accredited Hospital Or Physician, If Necessary; O Make Hospital And Home Visits For Job-related Cases And/or Acquired Illness, If Requested By The Management; O Conduct Monthly Inventory Of Medicines And Medical Supplies Of Esb Clinic And Make A Written Report Thereof For Submission To Esb O Assist The Sems/hsse Officers In All Hsse Activities, Reports And Programs. O Perform Other Assigned Tasks And Other Related Works. B. Personal Protective Equipment (ppe) Contractor Shall Provide Their Manpower The Required Personal Protective Equipment (ppe) (refer To Annex A “manpower Uniform & Personal Protective Equipment Assignment), Other Safety Equipment, Gadgets And Supplies Such As Uniforms, Coveralls, Safety Shoes, Working Gloves, Skull Guards, Safety Glasses, Dust Masks, Ear Muffs, Etc. Expenses For The Above Mentioned Equipment, Gadgets And Supplies Provided To The Manpower Shall Not Be Charged To Individual Manpower. Ppe Shall Have The Prior Approval Of The Assigned Pnoc Esb Hsse Officer Before Distribution To Manpower. A Sample Of Each Item Shall Be Inspected / Evaluated By Pnoc Esb Hsse Officer Prior To Delivery And Distribution To Manpower. Note: There Should Be Confidentiality Agreement Between Pnoc And The Contractor Upon Contract Implementation. C. Contractor Eligibility/qualification Contractor Must Have The Following: • Registration Of Certification Of Department Order 174; And • Contractor Shall Screen The Resumes Of Applicants For The Required Manpower And Shall Submit To Pnoc Within Seven (7) Calendar Days Upon Contractor’s Receipt Of The “notice Of Award”. Final Interview Of The Contractor’s Applicants Shall Be Scheduled By Pnoc Management In Coordination With The Contractor. Iii. Number Of Days For Manpower The Contractor Shall Provide Twenty Four (24) Personnel, Which Are As Follows: Iv. Supplies And Equipment 1. The Contractor Shall Provide The Following Other Supplies, Tools And Equipment During The Contract Duration. They Are Required To Provide An Initial Stock Of One (1) Quarter Supply Of The Below Listed Consumables. 2. The Basic Tools For Skilled Personnel Must Be Turned Over To Pnoc Esb Upon Completion Of The Contract. 3. The Billing Of Other Supplies, Tools And Equipment Will Be Based On The Actual Delivery. A. Tools And Equipment O Two (2) Units Heavy Duty Concrete Buggy O One (1) Unit Heavy Duty Wheel Borrow O One (1) Pc Rake O Two (2) Pcs Shovel (spade) O One (1) Units Bicycle For Use Of Foreman Inside The Base O One (1) Unit Manual Typewriter O One (1) Unit Pressure Washer, 30psi B. Basic Carpentry Tools O Carpenter Saw O Tape Measure, 5m O Tin Snips O Nail Puller O Framing Square O Levels C. Basic Electrician’s Tools O Tape Measure, 5m O Hammer O Tongue-and-groove Pliers O Wire Strippers O Side-cutting Diagonal Pliers O Linesman Pliers O Torpedo Level O Flashlight O Allen Wrench Set (hex Set) O Phillips Screwdrivers O Straight-blade Screwdrivers O Wire Crimpers D. Basic Plumber’s Tools O Tape Measure, 5m O Adjustable Wrenches O Screwdrivers O Pipe And Tube Cutters Note: - The Contractor Shall Provide The Equipment And Materials Listed Above. - Maintenance And Repair Of The Equipment Is For The Account Of The Contractor. - The Contractor Shall Propose A Yard And Building Maintenance Program. - Attendance From The Biometrics Shall Be Strictly Applied. The Contractor Shall Provide One (1) Unit Biometric Machine For Attendance Monitoring Of The Contractor’s Personnel. No Biometrics Attendance Shall Be Considered As No Attendance. Manual Approval Shall Not Be Considered. - The Attached Daily Basic Salary Rate Must Be The Minimum Daily Pay Off Rate Per Personnel. - Daily Basic Salary Rate Per Personnel Was Based On Circular No.: 2024 – 058 Dole New Wage Order For Minimum Wage Earners In The Calabarzon And Central Visayas Issued. - Coordination Meeting To Be Attended By Pnoc Representative And Contractor’s Representative Should Be Conducted Monthly. - The Holiday & Overtime Pay Is Not Yet Included In The Approved Budget Cost (abc). - The Total Amount Of Abc To Be Applied Will Be Determined Based On The Actual Covered Period When The Project Is Awarded. V. Special Conditions: 1. The Contractor Must Have A Minimum Of Two (2) Year Experience As A Custodial And General Service Contractor. 2. Iso Certification Of The Contractor Is Not Required Provided That The Contractor Has Served At Least Iso 9001 Certified Client. 3. The Contractor Shall Submit Current Medical Certificate And Nbi Clearance Of Their Personnel Before Engagement, Subject To Verification And Acceptance Of Pnoc. The Contractor Shall Provide Basic Annual Medical Certification That Workers Are Fit To Work. Result Of Drug Test Shall Be Submitted To Pnoc Esb And Personnel Found To Be Positive In Prohibited Drugs Shall Not Be Deployed At Esb. Expenses For Annual Medical Health Exam And Drug Testing Shall Be For The Account Of The Contractor. 4. The Contractor Shall Ensure That Their Workers Shall Be Wearing Proper Uniform Or Ppe, As The Case May Be Prior To Deployment To Assigned Tasks And Adhere To Pnoc Esb Health, Safety & Security Standards. 5. The Supplied Full Body Harness Shall Be Turned Over To Esb Upon Completion Of The Contract. 6. The Contractor’s Workers May Be Assigned To Certain Projects/operations Of Esb Outside Its Premises As May Be Necessary. 7. It Is Understood That The Contractor Assumes Full Responsibility For The Acts, Omissions, Fault Or Negligence, And Conduct Of Its Workers, Employees, Or Agents. Pnoc Reserves The Right To Recommend The Replacement Of Any Erring Personnel Whose Services Are Considered Unsatisfactory. 8. For Easy Communication, Service Vehicle Drivers Shall Be Required To Have Their Own Cellular Phone, Which Is Needed Especially During Long Distance Travel. 9. The Contractor Shall Provide Uniform (with Contractor’s Logo) To Its Workers Annually Preferably As Listed In The Manpower Uniform And Ppe Sheet Or Any Equivalent Uniform Acceptable To Pnoc. Workers Must Wear Their Id While On Duty. 10. Contractor’s Worker Can Be Required To Report For Linegang Activities And Other Operational Requirement Of Pnoc Outside The Regular Hours Of Work (e.i. 5:00pm – 8:00am Or During Holidays And Weekends). The Worker Must Be Available 1 Hour Before The Time Of Operations Or Linegang Activity. 11. The Leadman/foreman, Nurse And Other Personnel Is Required To Attend The Monthly Internal Health Safety Security And Environment (hsse) Meeting.

Purchaser Name: Management Of Poble Net Municipal Cleaning And Maintenance Services SL | Supply through Renting of a Two-compartment Collection Truck with Compaction and Rear Loading for the Mercantil Poble Net Serveis Municipals de Neteja I Manteniment, Sl.

Details: Maintenance of the sanitation network and associated structures, maintenance of surveillance systems and maintenance and operation of the storage basin-Place des Fêtes in Bezons The purpose of this framework agreement for purchase order is the maintenance and operation of the Networks And Sanitation Works And Measuring Points. The Services To Be Carried Out Are Within The Framework Of Surveillance Operations, Cleaning, Maintenance, Cleaning, Television Inspections, Maintenance Visits Of Networks And Sabs works, with the main objective of guaranteeing the continuity of the public sanitation service. The entire heritage to be maintained is described in the Cctp.

Details: Description 1 1012 Piece Ballpen, Black 2 60 Piece Ballpen, Blue 3 47 Piece Ballpen, Red 4 100 Piece Certificate Holder, Letter Size, Plastic 5 2 Piece Clip Board, Long 6 2 Book Columnar Notebook, 14 Columns 7 5 Piece Correction, Fluid Pen 8 5 Ribbon Correctible Ribbon Tape For Electric Olympia Typewriter 9 1 Set Cover, Book Binding, A4,5's 10 3 Set Cover, Book Binding, Long 11 5 Set Cover, Book Binding, A4, White 12 15 Set Cover, Book Binding, Long, White 13 5 Set Cover, Book Binding, A4, Dark Green 14 15 Set Cover, Book Binding, Long, Dark Green 15 5 Set Cover, Book Binding, A4, Sky Blue 16 15 Set Cover, Book Binding, Long, Sky Blue 17 5 Set Cover, Book Binding, A4, Yellow 18 15 Set Cover, Book Binding, Long, Yellow 19 5 Set Cover, Book Binding, A4, Dark Brown 20 15 Set Cover, Book Binding, Long, Dark Brown 21 5 Set Cover, Book Binding, A4, Orange 22 15 Set Cover, Book Binding, Long, Orange 23 5 Set Cover, Book Binding, Long, Red 24 4 Pack Daily Time Record, Paper (500's) 25 50 Piece Dvd Rewritable With Individual Casing 26 3 Piece Desk Tray Steel In And Out 27 2 Box Envelope, Pay, 500 Pieces Per Box 28 5 Box Envelope, Mailing Size : Short 29 18 Box Fastener, Plastic, 70mm Between Prongs, 50 Sets Per Box 30 75 Piece Folder, Pressboard, Short 31 7 Piece Magazine File Box, Large 32 70 Piece Manila Paper 33 1 Piece Notepad, Stick-on, 0.5 X 1.75 Inches, 100 Sheets Per Color 34 11 Piece Paper Catch, Finger Moistener ( Paste ) 35 4 Jar Paste, 200 Gsm 36 12 Piece Pencil Lead With Eraser 37 5 Piece Philippine National Flag, 4x8 All Cotton 38 43 Pack Photo Paper, Glossy, A4 10 Pieces Per Pack 39 2 Roll Plastic Cover Gauge 2.6 40 9 Case Push Pin, 100 Pieces Per Case 41 9 Piece Record Book, 150 Pages 42 4 Ribbon Ribbon, For Electric Typewriter, Olympia 43 3 Ribbon Ribbon,for Adding Machine 44 12 Piece Ring Binder, Plastic, 25mm 45 10 Piece Ring Binder, Plastic, 32mm 46 10 Piece Ring Binder, Plastic, 50mm (2") 47 5 Piece Ring Binder, Plastic, 1" 48 5 Piece Ring Binder, Plastic, 1/2" 49 6 Box Rubber Band, 70mm Round Length ,350grams 50 156 Piece Shoestring Colored ( Round ) 1m Long 51 68 Piece Sign Pen, Black, 0.7mm 52 3 Piece Sign Pen, Blue, 0.7mm 53 10 Piece Sign Pen, Parker Refill 0.7 Blue 54 102 Piece Sign Pen, Black, Ordinary 55 64 Piece Sign Pen, Blue, Ordinary 56 6 Piece Sign Pen, Red, Ordinary 57 6 Piece Sign Pen, Green, Ordinary 58 136 Piece Sign Pen, Black, 0.8mm 59 2 Piece Sign Pen, Blue, 0.8mm 60 10 Piece Sign Pen, Black, 1.0mm 61 1 Piece Self Inking Stamp: " Certified True Copy W/ Date " 62 1 Piece Self Inking Stamp: " Original Signed Copy " 63 1 Piece Self Inking Stamp: " Received " 64 68 Pack Specialty Board, White, Short 10's 65 1 Piece Stamp Pad Felt, #1, 5.31" X 3.54" 66 59 Pack Sticker Paper, A4 Glossy 10's 67 2 Piece Storage Box Card, With Lid 28cm W X 39cm L X 28cm H 68 6 Pad Notepad Stick On, 0.5x1.75 Inches, 5 Colors, (100 Sheets Per Color) 69 2 Pad Sticky Note, Index Tab, Sign Here, 5 Colors, (20 Sheets Per Color) 70 20 Roll Tape, For Adding Machine 71 46 Roll Tape, Double Sided, Width: 24mm 72 5 Roll Tape, Duct, 48mm 73 5 Roll Tape, Transparent, Width: 12mm 74 19 Cart Ink Cart, Brother Btd60, Black 75 14 Cart Ink Cart, Brother Bt5000, Cyan 76 14 Cart Ink Cart, Brother Bt5000, Magenta 77 14 Cart Ink Cart, Brother Bt5000, Yellow 78 9 Cart Ink Cart, Canon Gi 790, Black 79 2 Cart Ink Cart, Canon Gi 790, Cyan 80 2 Cart Ink Cart, Canon Gi 790, Magenta 81 2 Cart Ink Cart, Canon Gi 790, Yellow 82 8 Cart Ink Cart, Canon Pg-47 83 8 Cart Ink Cart, Canon Cl-47 84 4 Cart Ink Cart, Epson, Pigmented, 774 Black 85 5 Cart Ink Cart, Epson 008, Black 86 1 Liter Ink, Refill Universal Black 87 1 Bottle Ink, Refill Universal Cyan 88 1 Bottle Ink, Refill Universal Magenta 89 1 Bottle Ink, Refill Universal Yellow 90 80 Can Air Freshener, Gel 70g 91 6 Piece Battery D (megaphone) 92 21 Liter Bleaching Solution, 1l 93 52 Gallon Bleaching Solution, 1 Gallon 94 17 Piece Broom Stick With Handle 95 108 Pouch Detergent Powder, All Purpose, 500 Grams 96 230 Bottle Dish Washing Liquid 250ml 97 18 Piece Dishwashing Sponge 98 8 Gallon Disinfectant Solution, Concentrate 99 9 Piece Dipper 100 125 Sachet Fabric Softener, Antibac 27ml 101 20 Box Facemask, 50's 102 25 Bundle Garbage Bag, Medium, Black (100's) 103 20 Bundle Garbage Bag, Medium, Green (100's) 104 20 Bundle Garbage Bag, Medium, Yellow (100's) 105 27 Bundle Garbage Bag, Xl, Black (100's) 106 45 Bottle Glass Cleaner, 500ml 107 890 Pair Gloves Rubber, N548 108 3 Box Gloves Surgical #8 109 45 Piece Dust Pan Heavy Duty 110 70 Piece Hand Towel 111 2 Bottle Liquid Plumber 250ml 112 9 Piece Mophandle 113 4 Piece Mophead, Made Of Rayon, Weight: 400grams Min 114 3 Piece Mophead, Tornado, Zt11 115 2 Piece Mophead For New Tornado Mop 116 22 Bottle Muriatic Acid, 500ml 117 3 Piece Pail, Ordinary 118 61 Roll Plastic Bag, Transparent 25 Pcs Per Roll 16" X 24" 119 1 Piece Plunger 120 7 Piece Push Brush 121 80 Piece Sack, 50kilos 122 1750 Piece Sack, Used But Clean ( 50kls ) 123 29 Piece Scouring Pad With Foam 100mm X 75mm X 30mm 124 2 Piece Scrub Brush With Handle 125 50 Piece Soap, Bathroom, 90 Grams 126 8 Piece Toilet Bowl Brush 127 27 Piece Toilet Deodorant Cake 50g 128 1 Piece Tornado Mop 129 112 Piece Toilet Deodorant Cake 100g 130 30 Piece Tonner Bag, 40"w X 80"l 131 4 Piece Trashcan With Cover, Medium 132 270 Piece Folder, Pressboard, Long 133 19 Jar Glue, All Purpose, Gross Weight: 200 Grams Min 134 154 Piece Marker, Permanent, Black 135 7 Piece Marker, Permanent, Blue 136 5 Piece Marker, Permanent, Red 137 61 Piece Marker, Whiteboard, Black 138 3 Piece Marker, Whiteboard, Blue 139 3 Piece Marker, Whiteboard, Red 140 53 Pad Notepad, Stick-on, 2x3, 100 Sheets Per Pad 141 133 Pad Notepad, Stick-on, 3x3, 100 Sheets Per Pad 142 40 Pad Notepad, Stick-on, 3x4, 100 Sheets Per Pad 143 10 Box Rubber Band, 70mm Min Lay Flat Length (#18) 144 78 Piece Sign Pen, Black, Liquid/gel Ink, 0.5mm Needle Tip 145 59 Piece Sign Pen, Blue, Liquid/gel Ink, 0.5mm Needle Tip 146 34 Piece Sign Pen, Red, Liquid/gel Ink, 0.5mm Needle Tip 147 6 Piece Stamp Pad, Felt, Bed Dimension: 60mm X 100mm 148 18 Roll Tape, Packaging, Width: 48mm (±1mm) 149 38 Cart Ink Cart, Epson C13t6664100 (t6641), Black 150 17 Cart Ink Cart, Epson C13t664200 (t6642), Cyan 151 17 Cart Ink Cart, Epson C13t664300 (t6643), Magenta 152 17 Cart Ink Cart, Epson C13t664400 (t6644), Yellow 153 15 Ribbon Ribbon Cart, Epson C13s015632, Black, Forlx-310 154 41 Piece Battery, Dry Cell, Aa 155 39 Piece Battery, Dry Cell, Aaa 156 38 Piece Cleanser, Scouring Powder 350g Min./can 157 2 Pouch Detergent Powder, All Purpose 1kg 158 49 Can Insecticide, Aerosol Type, Net Content: 600ml Min 159 10 Cart Ink Cart, Epson 003, Black 160 5 Cart Ink Cart, Epson 003, Cyan 161 5 Cart Ink Cart, Epson 003, Magenta 162 5 Cart Ink Cart, Epson 003, Yellow

Details: Description Supply And Delivery Of The Following Various Hardware And Construction Materials: 70.00 Bags Portland Cement 30.00 Pcs. 12mmø, Rsb (grade 40) 30.00 Kgs. G.i. Tie Wire, #16 30.00 Pcs. Metal Abrasive Flat Cutting-off Wheel, 14” 20.00 Pcs. 1/4" Thk. Ordinary Plywood 5.00 Kg. Nylon 0.90mm 10.00 Pcs. G.i. Pipe, 2"ø (no Thread) 10.00 Pcs. Scaffolding Clamp, Swivel Type 10.00 Pcs. Scaffolding Clamp, Fixed Type 2.00 Set Spanner Scaffolding Ratchet Wrench 6.00 Pcs. Catwalk For Scaffoldings 2.00 Pcs. Cross Cut Hand Saw 3.00 Pcs. Circulaw Saw Blade For Wood, (7 1/4" X 40t) 1.00 Pcs. Claw Hammer Wooden Handle 2.00 Pcs. Aluminum Magnetic Level Bar 20.00 Grit Sanding Paper, #80 20.00 Grit Sanding Paper, #100 2.00 Set Bluetorch Gun 10.00 Can Bluetorch Butane 2.00 Pcs. Pull - Push Rule, 5m 2.00 Pcs. 90 Degrees Diamond L Shape Square Ruler 2.00 Pcs. Plastering Trowel 2.00 Pcs. Heavy Duty Gun Tacker 5.00 Box Gun Tacker Staple 5.00 Set Router Bit Set 6 Pieces 2.00 Box 1", Cwn 2.00 Box 1 1/2", Cwn 2.00 Box 2", Cwn 2.00 Box 2 1/2", Cwn 2.00 Box 3", Cwn 2.00 Box 4", Cwn 5.00 Pcs. Pvc Pipe, 2"ø X 3m (series 1000) 5.00 Pcs. Pvc Pipe, 4"ø X 3m (series 1000) 10.00 Pcs. Pvc Orange Elbow, 2"ø X 90º 10.00 Pcs. Pvc Orange Elbow, 4"ø X 45º 10.00 Pcs. Pvc Orange Elbow, 4"ø X 90º 10.00 Pcs. Pvc Orange Tee, 2"ø 10.00 Pcs. Pvc Orange Tee, 4"ø 10.00 Pcs. Pvc Orange Wye, 2"ø 10.00 Pcs. Pvc Orange Wye, 4"ø 10.00 Pcs. Pvc Orange P-trap, 2"ø 10.00 Pcs. Pvc Orange Coupling Reducer, 4"ø X 2"ø 10.00 Pcs. Pvc Orange Coupling Reducer, 3"ø X 2"ø 10.00 Pcs. Pvc Orange Tee Reducer, 4"ø X 2"ø 10.00 Pcs. Pvc Orange Wye Reducer, 4"ø X 2"ø 10.00 Pcs. Pvc Orange Clean Out Set, 2"ø 10.00 Pcs. Pvc Orange Clean Out Set, 4"ø 20.00 Pcs. Pipe Dredging Agent Dissolve Blockage Toilet Sink, 1l 1.00 Pcs. Heavy Duty Adjustable Wrench, 24" 1.00 Pcs. Heavy Duty Adjustable Wrench, 42" 42.00 Can Pvc Solvent Cement W/ Brush, 200cc 20.00 Pcs. Pvc Pipe (blue), 1/2"ø X 3m 30.00 Pcs. Pvc Coupling (blue), 1/2"ø 50.00 Pcs. Pvc Elbow (blue), 1/2"ø X 90º 30.00 Pcs. Pvc Tee (blue), 1/2"ø X 90º 30.00 Pcs. Pvc Threaded Elbow (blue), 1/2"ø 30.00 Pcs. Pvc Threaded Tee (blue), 1/2"ø 30.00 Pcs. Pvc Female Adapter (blue), 1/2"ø 30.00 Pcs. Pvc Male Adapter (blue), 1/2"ø 20.00 Pcs. Pvc End Cap (blue), 1/2"ø 20.00 Pcs. Compression Coupling, 1/2"ø 20.00 Pcs. Compression Tee, 1/2"ø 10.00 Pcs. Heavy Duty Jet Valve, 1/2"ø 10.00 Pcs. Heavy Duty Gate Valve, 1/2"ø 10.00 Pcs. Heavy Duty Jet Valve, 3/4"ø 10.00 Pcs. Heavy Duty Gate Valve, 3/4"ø 50.00 Pcs. Stainless Faucet 27.00 Set Bilster Pack Lever Type Toilet Water Tank Fittings 17.00 Set Stainless Steel Bidet 17.00 Pcs. Stainless Flexible Hose, 1/2" 17.00 Pcs. Stainless Steel Two Way Angle Valve, 1/2" 45.00 Pcs. Teflon Tape, 3/4" X 10m 2.00 Pcs. Chisel, 3/4" 2.00 Pcs. Chisel, 1 3/4" 6.00 Box 1/8 X 1/2 Blind Rivets, 100 Pieces 5.00 Box 5/32 X 1/2 Blind Rivets, 100 Pieces 5.00 Box 3/16 X 1/2 Blind Rivets, 100 Pieces 5.00 Box 1/8 X 3/4 Blind Rivets, 100 Pieces 5.00 Box 5/32 X 3/4 Blind Rivets, 100 Pieces 6.00 Box 3/16 X 3/4 Blind Rivets, 100 Pieces 10.00 Pcs. 4.5mm Fiber Cement Board 33.00 Pcs. Metal Stud, 25mm X 52mm, 0.50mm Thk. X 3m 11.00 Pcs. Carrying Channel, 12mm X 38mm, 0.50mm Thk. X 5m 29.00 Pcs. Hanger Bars / Rod, 12mm X 38mm, 0.50mm Thk. X 5m 173.00 Pcs. Metal Furring Clip Or W - Clip 7.00 Pcs. Wall Angle, 25mm X 25mm, 0.40mm Thk. X 3m 116.00 Pcs. 1" Metal Screw 2.00 Pcs. Chisel, 1" 2.00 Pcs. Chisel, 2" 5.00 Set Heavy Duty Aluminum Glass Door Lock 36.00 Set Heavy Duty Door Knob 10.00 Pcs. Heavy Duty Padlock (big) 5.00 Set Heavy Duty Hole Saw Door Knob Lock Installation Kit 10.00 Pcs. Acetic Cure Silicone Sealant (clear) 10.00 Pcs. Valley Gutter 3.00 Box Tekscrew, 2" Metal 5.00 Pcs. 1/8" Drill Bits (black) For Metal 2.00 Pcs. High Grade Waterproofing Roof Sealant - 4l 9.00 Pcs. Pre-painted Metal Sheets (13' Long X 0.50mm Thk.), Rib Type - Green 360.00 Pcs. Wood Tekscrew, 1 1/2" 5.00 Pcs. Transparent Googles (safety Googles) 40.00 Pcs. Dust Mask 50.00 Pairs Cottonpoly Construction Gloves, Coated With Red Orange Latex Rubber Palm Coating 5.00 Pairs Heavy Duty Welding Protective Equipment Gloves (leather) 5.00 Pairs Welding Gloves 30.00 Pcs. Safety Cotton Polo Shirt 30.00 Pcs. Safety Cotton Long Sleeves W/ Collar 10.00 Set Rotary Hammer Drill Bit 5 Pieces (6mm, 6mm, 8mm, 10mm, 12mm) 3.00 Pail Gloss Latex (light Apple Green) 6.00 Pail Gloss Latex (yellow) 3.00 Pail Gloss Latex (white) 2.00 Gal Rubberized Paint (white) 2.00 Gal Rubberized Paint (yellow) 5.00 Gal Rubberized Paint (gray) 3.00 Gal Rubberized Paint (green) 4.00 Gal Acreex Reducer 52.00 Pcs. Paint Roller, 9" W/ Pan 52.00 Pcs. Paint Roller, 7" W/ Pan 42.00 Pcs. Baby Roller, 4" 60.00 Pcs. Paint Brush, 2" 10.00 Gal Laquer Thinner 7.00 Gal. Glazing Putty 4.00 Pail Flatwall Enamel (white) 10.00 Gal. Red Oxide Primer 5.00 Pail Enamel Paint (light Apple Green) 15.00 Pcs. Paint Brush, 4" 15.00 Pcs. Paint Brush, 1" 585.00 Pcs. Chb, 4" 30.00 Pcs. Tubular Bar G.i., 1" X 2" X 1.2mm 65.00 Pcs. Tubular Bar G.i., 2" X 3" X 1.2mm 20.00 Pcs. Flat Bar G.i., 1" X 3mm Thk. 2.00 Set 10m Welding Cable With Electrode Holder And Connector And With Variants 75.00 Kgs High Quality Welding Electrodes 20.00 Pcs. Wd - 40, 330 Ml 120.00 Pcs. 4-inch Cutting Disc For Metal 13.00 Pcs. G.i. Pipe, 4" (sch. 40) 50.00 Pcs. Angle Bar, 2" X 2" 50.00 Pcs. Angle Bar, 1.5" X 1.5" 10.00 Pcs. 2" X 3" X 1.50mm Thk Tubular Bar G.i. 3.00 Pcs. 2" X 4" X 1.50mm Thk Tubular Bar G.i. 4.00 Pcs. 2" X 6" X 1.50mm Thk Tubular Bar G.i. 2.00 Set Heavy Duty Fliers 2.00 Pcs. Heavy Duty Flat Screw 2.00 Pcs. Heavy Duty Phillip Screw 1.00 Set Heavy Duty Fiberglass Multi-purpose Folding Ladder, 12ft 5.00 Set Black Oxide Coated Drill Bit Set (black &gold), 14 Pieces - For Metal 5.00 Set Black Oxide Coated Drill Bit Set (black &gold), 14 Pieces - For Concrete 35.00 Pc. Led Bulb, 23 Watts 30.00 Pcs. 1/2"ø X 3m Pvc Pipe 33.00 Pcs. Junction Box 3.00 Box 2.0 Mm² Thhn Copper Wire 5.00 Box 3.5 Mm² Thhn Copper Wire 2.00 Box 5.5 Mm² Thhn Copper Wire 44.00 Pcs. Receptacle With Cover, 2" 44.00 Pcs. Led Bulb, 12 Watts 5.00 Can Pvc Solvent Cement 400ml 10.00 Pcs. Electrical Tape, Big 22.00 Pcs. Bolt, 1" 2.00 Set Extension Cable Reel Drum, 25m

Details: Description Gov. Celestino Gallares Multi-specialty Medical Center Invitation To Bid For Supply, Delivery, Installation, Testing And Commissioning Of 4 Lots Various Medical Equipment (batch 1) For Gov. Celestino Gallares Multi-specialty Medical Center 1. The Gov. Celestino Gallares Multi-specialty Medical Center (gcgmsmc), Through The Health Facilities Enhancement Program 2024 Intends To Apply The Sum Of Thirty-five Million Three Hundred Fifty-five Thousand Pesos Only (php35,355,000.00) Being The Abc To Payments Under The Contract For Cb-2024-10-0003. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Gcgmsmc, Through The Health Facilities Enhancement Program 2024 Intends To Apply The Sum Of Thirty-five Million Three Hundred Fifty-five Thousand Pesos Only (php35,355,000.00) Being The Abc To Payments Under The Contract For Each Lot/item.et Al. Lot No. Item/description Quantity Unit Cost Total Cost 1 Body Box+spirometry 1 7,000,000.00 7,000,000.00 2 Multi-channel Digital Holter 1 3,000,000.00 3,000,000.00 3 Various Laboratory Equipment 1 5,355,000.00 5,355,000.00 4 Thoracic Multidisciplinary Tower, Surgery 1 20,000,000.00 20,000,000.00 Grand Total 35,355,000.00 Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 2. The Gcgmsmc, Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Bidders Should Have Completed, Within 3 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Gcgmsmc Through Electronic Mail Via Procurement@cpspecialtycenter.org Or Through The Cellular Number 09209437250. 5. A Complete Set Of Bidding Documents May Be Acquired And Downloaded By Interested Bidders From Gcgmsmc Google Drive From (procurement@cpspecialtycenter.org) On October 30- November 19, 2024 And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Indicated Below In Accordance With The Following Schedule: Lot No. Item/description Total Cost Bidding Documents Fee (in Philippine Peso) 1 Body Box+spirometry 7,000,000.00 10,000.00 2 Multi-channel Digital Holter 3,000,000.00 5,000.00 3 Various Laboratory Equipment 5,355,000.00 10,000.00 4 Thoracic Multidisciplinary Tower, Surgery 20,000,000.00 25,000.00 The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through Online Banking Or Online Deposit With The Following Bank Details: Bank Name: Development Bank Of The Philippines Account Name: Gcg Multi-specialty Medical Complex Account Number: 00-0-15490-780-5 For Bidders Choosing To Pay Via Online Transfer Or Bank Deposit, Please Ensure That Proof Of Your Successful Transaction Is Promptly Sent To The Procurement Email Address: Procurement@cpspecialtycenter.org. In Compliance With Coa Circular Number 2021-014, Clause 5.2, An Acknowledgement Receipt Will Be Issued As Proof Of Verified And Received Payment. Access To Bidding Documents Will Be Granted Only Upon Presentation Of This Acknowledgement Receipt. 6. The Gcgmsmc Will Hold A Pre-bid Conference On The 7th Day Of November 2024 At 0900h At Room 3c-e310 Located At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur, Cortes, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission On Or Before The 19th Day Of November 2024 At 0900h At Gcgmsmc Procurement Office Room 3c-w327 Located At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur, Cortes, Bohol Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On The 19th Day Of November 2024 At 0900h At Room 3c-e310 At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur Cortes. Bids Will Be Opened In The Presence Of The Bidders’ Authorized Representatives Together With Their Company Id. 10. The Gcgmsmc Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Mary Grace L. Simbajon Procurement Office Malayo Sur, Cortes, Bohol Procurement@cpspecialtycenter.org +639209437250 Jessa O. Quiñal Procurement Office Malayo Sur, Cortes, Bohol Procurement@cpspecialtycenter.org +639452478632 October 28, 2024 Approved By, (signed) Doreen A. Lugo, Lpt Bac Chairperson Noted By, (signed) Laurence Elliot R. Tirol, Md, Fpcp Medical Center Chief I Head Of Procuring Entity .<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>. Item: 1 Unit: Lot Qty: 1 Unit Cost: 7,000,000.00 Total Cost: 7,000,000.00 Description: Body Box+spirometry Measurement (specific) Airway Resistance: Reff, Srtot, Sr0.5, Srmid As Well Asreff, Rtot, R0.5, And Rmid Static Lung Volumes: >absolute Lung Volumes: Tlc, Frcpleth, Rv, Rv/tlc And Others; >static Lung Volumes: Vc Max, Ic, Erv And Others Dynamic Lung Volumes: Fvc, Fev1, Fev1/fvc, Mfef 25-75, Fef 75, Pef And Others Dlco: Co Diffusion Real Time (rt) And Intra Breath (ib) Additional Software's: - Mip/mep - Bronchial Challenge Components Airtight Box With Panorama Glazing,integrated Control Units And New Digital Ambient Pressure Compensation Circuit Calibration-free And Waterproof Ultrasonic Flow Sensor At Least 1000-1120 Liters Internal Volume (body Box) Pc With Hygiene Keyboard/mouse, Inkjet Printer, And 24° Lcd Flatscree Monitor On An Ergonomic, Smooth-running Trolley Complete Software Package For Measurement And Report Generation Plus Extended Infrastructure For Data Management Flow Measurement Type: Ultrasound Methodological Peculiarities: Simultaneous Measurement Of Ultrasound Transit Time In And Against Flow Direction Sample Rate: True 1000 Hz For Flow, Achieved By 2000 Ultrasound Transit Time Measurements Range: 0 To 18 L / S Bidirectional Accuracy: Exhalation 0 To 14 L / S: 1.5 % Or 0.05 L / S ; Inhalation 0 To 14 L/s: 2.0 % Or 0.05 L/s Precision: At Least 1% Or 0.1 L / S Resolution: At Least 1ml/s Total Resistance: <0.150 Kpa *s/l At 14 L/s Dead Space Ultrasonic Sensor (uss) Module: 66 Ml Volume Integration Principle: Software Volume Integration Of Flow Signal (ultrasound) Range: At Least 30 L Accuracy: Exhalation And Inhalation 0.5 To 14l/s Precision: At Least 0.05 L Resolution: At Least 1 Ml Mouth Pressure Measurement Type: Piezo Resistive Or It's Equivalent Range: ± 18 To ±30 Kpa Accuracy: ± 1 % Or 0.01 Kpa (0.075 Mmhg) Resolution: At Least 0.003 Kpa (0.0225 Mmhg) Box Signal Transducer Type: Piezo Resistive, Calibrated In Terms Of Shift Volume Or It's Equivalent Transducer Range: 0 To ± 2500 Ml At 1000 Hpa Ambient Pressure Accuracy: At Least ± 2 % At 0.25 Hz / 0.5 Hz Compensation Of Ambient Pressure Variations: Digital Ambient Pressure Compensation Or It's Equivalent Box Material: Aluminium /glass Construction Principle: Volume-constant Volume: At Least 1110 L Height Step-in: At Least 2- 6 Inches Weight: At Least 175 Kg (385 Lbs), At Least 150 Kg (330 Lbs) Without Door Door-lock: Electromagnetic Via At Least 8 Magnets; Stable Hand Grip: With Safety Stable Hand Grip Must Be On The Side Of The Box Upon Entry For Safety Of The Patient Size Outside: (at Least 932mm L) X (at Least 80 Mm W) X (at Least 1,850 Mm W) ; Including Door Handle Interface To Pc: Usb Box Calibration Syringe Calibration Volume: At Least 50 Ml, Motor-driven Calibration Pump Calibration Frequency: 0.25 Hz, 0.5 Hz, And 1 Hz Bench Maximal Load Bench: At Least 250 Kg (551 Lbs) Sitting Height: At Least 47.6 Cm (18.7") Sitting Area: At Least (50.6 Cm W) X At Least ( 33.0cm D), ( 19.9"x 13.0") Flexible 3d Arm Can Be Extended Outside Of The Cabin Up To An Impressive Reach : At Least 63 Centimeters (cm) Adjustable Height Inside Cabin: 98.3 Cm To 141.5 Cm Work Station Dimensions: (at Least 61 Cm W) X (at Least 62 Cm D) X (at Least 120 Cm H); ( 24"x24.4"x47.3") Weigh Total: Atleast 45 Kilogram (kg) Inclusion Of Pc, Printer And Lcd Monitor. Pc: 12th Generation Intel Core I5-10400t 35 W 6 12 2.0 Ghz To 3.6 Ghz 12 Mb Intel Uhd Graphics 630. Height: Front Height At Least 182.00mm (7.16 Inches) ; Rear Height Atleast 182 Mm ( 7.16 Inches); Width: At Least 178.50mm (7.02inches); Depth: At Least 36.00 Mm ( 1.42 In); Weight At Least 1.17 Kg ( 2.58 Lb). Monitor: Diagonal Viewing Size 604.70 Mm (at Least 23.8 Inches) Printer Iso Speeds: Up To 18 Ppm Black, Up To 10 Ppm Color Display: Button And Led Control Panel Standard Connectivity: 1 Usb 2.0; 1 Ethernet; 1 Wireless 802.11b/g/n Paper Handling: 225-sheet Input Tray; 60-sheet Output Tray Duty Cycle: Up To 15,000 Pages Borderless: Yes, Up To 8.5 X 11 In (us Letter), 210 X 297 Mm(a4); Ink: Yellow 935 Xl , Cyan 935 Xl, Magenta 935 Xl, And Black 934 Xl At Least Four (4) Swivel Castor , Lockable At Least One (1) Shelf One (1) Webcam One (1) Microphone Keyboard Drawer With Mousepad (left/right): Keyboard Platform Area (at Least 40cm W) X (at Least 20 Cm D) (15.7" X 7.9"); Load Capacity At Least 3(kg) ( 6.6llbs) Distributed Load; Mouse Pad Can Be Extended From Left To Right And Vice Versa. Drawer: Interior Area: (34 Cm W) X (24 Cm D) X ( 8cm H) (13.4 "x 9.4" X 3.1") ; Platform Area: 45 Cm W X 36 Cm D ( 17.7 X 14.2") ; Load Capacity Shelf: At Least 15 Kg (33lbs) Distributed Load ; Load Capacity Drawer: At Least 3 Kg ( 6.6 Lbs) Distributed Load. Monitor Mount: Load Capacity At Least 14 Kg ( 30.9 Lbs) Electrical Safety: Protection Class I Diffusion Measurement Type: Infrared Range: 0 To 0.33 Vol % Accuracy: At Least ± 0.003 Vol % Or ± 2 % Relative Resolution: At Least 0.0005 Vol % Response Time: ≤ 145 Ms Pressure Reducer For Demand Valve Inlet Pressure: At Least 200 Bar Outlet Pressure: At Least 7 Bar Flow Rate: At Least 500 L/min, At Most 700 L/min Ambient Measurement Temperature Sensor : Measurement Range: – 10 To 50 °c (14 To 122 °f) ; Accuracy: ± 0.5 °c At 20 °c (68 °f) ± 1 °c At 10 To 34 °c (50 To 93.2 °f) Humidity Sensor : Measurement Range: 0 To 100 % Relative Humidity ; Accuracy: 4 % Relative Humidity At 20 – 80 % Relative Humidity Air Pressure Sensor: Measurement Range: 500 To 1100 Hpa (375 To 825 Mmhg); Accuracy: ± 2.5 Hpa (1.88 Mmhg) At 700 To 1060 Hpa (525 To 795 Mmhg) Ambient Conditions Temperature: + 10 °c To + 34 °c (+ 50 °f To 93.2 °f) Relative Humidity: 20 To 80 % Rh, Non-condensing Ambient Pressure: 700 To 1060 Hpa (525 To 795 Mmhg) Transport And Storage Conditions Temperature: – 20 °c To + 50 °c (– 4 °f To 122 °f) Relative Humidity: 15 To 95 % Rh, Non-condensing Ambient Pressure: 600 To 1200 Hpa (450 To 900 Mmhg) Power Supply (cabin) Mains Voltage: 100 To 240 V, Ac 50 To 60 Hz Power Input: Max. 80 Va Electrical Safety: Protection Class I Moisture Protection At Least Ip 20 Operating Mode Complete System: Continuous Operation Measurement Programs Body Plethysmography Forced Spirometry (fvc) / Slow Spirometry (svc) / Mvv Spirometry Animation Programs Single-breath Co-diffusion Realtime And Intrabreath Bronchial Challenge Calibration Program Volume Calibration Gas Calibration Body Box Calibration Organization Programs Patient Data Report Output Inclusive Multiformat Output Must Be But Not Limited To Pdf, Jpg, Tiff, And Rtf. Auto Interpretation Ats/ers Quality Check Comments / Physician Interpretation Report Designer For Generating Customized Reports Predicted Values / Reference Sets Design / Editor Offline Data Input Backup / Restore Data Export / Import User Parameter Editor For Customized Parameters Patient Data Management For Advanced Corrective Actions ; Questionnaire Designer For Customized Questionnaires Gdt Connection Spirometer Data Transfer ( Microloop, Microlab, Flowscreen, Spiropro) Security And User Administration Accessories At Least Two Hundred Fifty (250) Pieces Disposable Filter And At Least 250 Pieces Noseclip. One (1) Unit Of Uninterruptible Power Supply (ups) 2 Kva For Printer, Monitor And Pc. One (1) Unit Of Uninterruptible Power Supply (ups) 2 Kva For Body Box. Two (2) Units Of Automatic Voltage Regulator (avr) 2 Kva. Set Of Ink: (1) Pack 935 Xl Yellow; (1) Pack 935 Xl Cyan; (1) Pack 935 Xl Magenta, And (1) Pack 934 Xl Black. With At Least ( One) 1 50 Lbs/ 22.68 Kg Dlco Gas & Two (2) Gauges. Particulars Vendor Shall Warrant That The Product Supplied Shall Equal The Published Specifications. Vendor Shall Provide No Less Than Five (5) Years Warranty On The System/equipment For Spare Parts And Service Upon Acceptance By End User/s. Vendor Shall Provide Certificate Of Parts Availability For 10 Years In The Market. Vendor Agrees To Provide Free Of Charge All Parts And Labour Necessary To Repair The System During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Defective In Material Or Workmanship Under Normal Use. Vendor Must Conduct Quarterly Preventive Maintenance Program And Provide Preventive Maintenance Report Within The Warranty Period. Vendor Agrees To Add Equipment Down-time (in Number Of Days) To Total Warranty Period. Vendor Must Respond With Technical Support Staff Response Time Within At Least 2 Hours Via Remote Access Or In-person Where Applicable, Within At Least Twenty-four (24) Hours Upon Notification Of End-user; And Must Perform Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification Of End-user. System/equipment Shall Be Delivered With At Least Three (3) Copies Of All Service Manuals And At Least Three (3) Copy Of All User Manuals. System/equipment Shall Be Delivered Complete With All Cabling, Connectors, Junction Boxes, Mounting Hardware, And All Other Accessories Necessary For Full Operation Of The System/equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid. Any And All Software Necessary To Technically Support The System Shall Be Included. Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied. Devices Must Meet All Currently Applicable Safety Standards, Local And International Where Applicable. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted System For Not Less Than Five (5) Years After The Warranty Period Vendor Shall Agree To Provide Factory Or Principal Manufacturer Technical Training With Certificate For At Least Two (2) In-house Biomedical Technologist Or Engineer And/ Or Two (2) To Three (3) Respiratory Therapist's With Free Of Charge. Vendor Shall Conduct Annual Calibration And Provide Calibration Certificate Within Warranty Period. Vendor Shall Provide Comprehensive Training Of Users In Operation, Basic And Advance Maintenance Shall Be Provided. Vendor Shall Provide Routine Software And/ Or Hardware Upgrade. Vendor May Include Post-warranty Comprehensive Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimates For Major Spare Part/s. Vendor To Shoulder Any Expenses Related To Delivery, Installation, Commissioning, Permit/s, Training And Other Sundries Necessary For The Complete Installation Of The Body Box + Spirometry. Vendor Must Have Available Technical Staff And/or Office/s Within Visayas. Manufacturer Should Have An Exisiting Or Active Iso Certification En Iso 13485:2016 Or Its Equivalent For Quality Standard. Vendor Shall Have The Availability Of Stock For Dlco Gas And/ Or Assist The End User To Purchase Dlco Gas From Another Vendor Of Dlco Gas. Principal’s / Manufacturer’s Product Portfolio Must Have Been Present In The Local Market For The Past Ten (10) Years. Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. .<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>. Item: 2 Unit: Lot Qty: 2 Unit Cost: 1,500,000.00 Total Cost: 3,000,000.00 Description: Multi-channel Digital Holter Holter Recorder/s. Multi-channel, Digital Ecg Channels: 2 Channels; 3 Channels Lead-wire Cable: At Least 7 Lead-wire Recording Time: At Least 24 Hours Light Emitting Diode/s: Event Button Status Indicator Led; Hookup Guidance Led Demographic Data Entry & Hookup Preview: Pc Application Via Bluetooth Communication And/or Mobile Application Via Bluetooth Communication; Data Download And Transfer: Usb 2.0 High Speed Cable; Memory: Non-removable Digital Memory Power Requirements: Hr03/aaa Nimh Rechargeable Battery With Charger; At Least 4 Ports With Extra 16 Pieces Rechargeable Aaa Battery With Two Charger Weight: Up To 53 Grams Dimensions: At Least 71x64x20 Millimeter/s Frequency Response 0.05 Hertz To 70 Hertz Sampling Rate: 256 Sps With 12-bit Resolution Input Voltage Range Ecg: ± 6 Mv Input Impedance >10 M Compatibility With Mobile Application And Pc Application Ingress Protection Rating: Ip43 Auto Start Feature Signal Quality Guidance Patient Data Is Automatically Deleted From Device After The Recording Starts To Ensure No Patient Data Is Left Behind And Ensure Patient Information Is Protected Supports Connection To Ecg Holter Management System For End-to-end Workflow Process From Orders To Final Report Storage By Fully Integrating To A Cardiology Information System Secure Log-in With Administrator Setup Account To Avoid Unauthorized Use Of Devices. Holter Electrocardiogram Management System, 1 System Customized Parameter Set/s Based On Patient Age Groups And Types For Faster Analysis Advanced Heart Rate Trend, Identifies Noise Regions Which Can Be Quickly Added/deleted For Cleaner Data And Spot Potential Atrial Fibrillation (af); Quick Scan: Two Button Workflow Speed Analysis; Prioritized Event Layout: Automatic Critical Events Display In A Separate Tab To Improve View/s Of Pvcs Support For Ecg Algorithm/s Such As Heart Arate Variability (hrv), Qt Measurement, St Segment Measurement; Heart Rate Turbulence (hrt) And/or T-wave Alternates (twa); Dedicated Mode/s For Atrial Fibrillation Cases: 7-day Holter Overview With Ability To Select 48*hour Period For Analyses; Automatic Detection Of Af Episodes; Automatic Sve Suppression During Af; Dedicated Mode/s For Pacemaker Patient/s: Automatically Identifies Pacemaker Type And Sets Parameters; Measures Pulse Width To Ensure Pacemaker Is Working Correctly; Shows Exit Blocks, Over- And Under- Sensing And Fusion Beats; Integrated Ecg Preview App Automation Processes To Streamline Orders And Report Generation And Minimize Manual Data Entry. Allows Satellite Sites To Download Holter Data, Edit Patient Demographics, Edit Patient Events, And Upload The Study For Analysis At A Central Location; Allows Access To Data From Any Workstation Via Floating Licenses Allows Immediate Access To Inpatient Holter Data From Beside Monitor/s And/ Or Telemetry, Allowing For Ecg Algorithms To Be Used In Risk Stratification; Integrated Workflow Minimizes Training Requirements; Security Administrator-controlled User Assigned Privileges Protect Data Security; Single Sign-on To Imply With Comply With Facility Standards For Username; Audit Logging To Facilitate Security Privacy And Regulatory Compliance; Tools To Help Ensure Compliance With Hipaa And Gdpr Standards Data Access To Patient Information Can Be Restricted By Site And Location; System Must Be Integrated With Facility Servers And Deployed Virtually To Simplify Implementation And Management; System Can Be Accessed Remotely By Service Engineers For Maintenance And Troubleshooting Particulars Vendor Shall Warrant That The Product Supplied Shall Equal The Published Specifications. Vendor Shall Provide No Less Than Five (5) Years Warranty On The System/equipment For Spare Parts And Service Upon Acceptance By End User/s. Vendor Agrees To Provide Free Of Charge All Parts And Labor Necessary To Repair The System During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Detective In Material Or Workmanship Under Normal Use. Vendor Shall Conduct Quarterly Calibration And Preventive Maintenance Program And Provide Preventive Maintenance Report Within The Warranty Period. Vendor Agrees To Add Equipment Down-time (in Number Of Days) To Total Warranty Period. Vendor Must Respond With A Technical Support Staff Response Time Within At Least 2 Hours Via Remote Access Or In Person Where Applicable, With At Least Twenty-four (24) Hours Upon Notification Of End User And Must Perform Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification Of End User. System/equipment Shall Be Delivered With At Least One (1) Copy Of All Service Manuals And At Least Two (2) Copies Of All User Manuals. System/equipment Shall Be Delivered Completely With All Cabling, Connectors, Junction Boxes, Mounting Hardware, And All Other Accessories Necessary For All Operation Of The System/equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid. Any And All Software Necessary To Technically Support The System Shall Be Included. Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied. Devices Must Meet All Currently Applicable Safely Standards, Local And International Where Applicable. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted System For Not Less Than Five (5) Years After The Warranty Period. Vendor Shall Agree To Provide Factory Or Principal Manufacturers, Trainings And/or Certification For At Least One (1) In-house Biomedical Technologist Or Engineer And End User. Vendor May Include Post-warranty Comprehensive Calibration And Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimates For Major Spare Part/s Vendor May Include Post-warranty Comprehensive Calibration And Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimates For All Spare Part/s Vendor To Shoulder Any Expenses Related To Delivery, Installation, Commissioning, Permit/s. Training And Other Sundries Necessary For The Complete Installation Of The Vendor Must Have Available Technical Staff And/or Office/s Within The Region Principal’s/ Manufacturer’s Products Must Have Been Present In The Local Market For The Past Ten (10) Progress Billing And Payment May Be Availed B The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. .<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>. Item: 3 Unit: Lot Qty: 1 Unit Cost: 5,355,000.00 Total Cost: 5,355,000.00 Description: Supply, Delivery, Installation, Testing & Commissioning Of Various Laboratory Equipment Biological Refrigerator (single Door) High Performance Refrigerator That Can Store Various Biological Products Storage Volume Of At Least 25.2 Cu Ft. (390l) Cabinet Type, Upright Single Clear Glass Door Should Have At Least 7 Shelves (adjustable) Hydrocarbon Compressor And Refrigerant That Should Not Contain Fluorine Or Chlorine Variable Frequency Compressor With Optimized Cooling System Temperature Range Should Be At 2⁰ To 8⁰c Has Precise Temperature Control System Large Space And Superior Uniformity With Temperature Uniformity Of At Least ± 3⁰c Forced Air Cooling Type Self-closing Door Capable Of At Least 90⁰ Stay Open Feature With Security Lock Has Optimized System And Noise Reduction Design To Reduce Noise Level To About 43db(a) 220~240/50/60 Power Supply (v/hz), 3.5a, 700/850w Microprocessor Electronic Controller System And Led Display Stable Performance And Should Have Multiple Functional Alarm Modes: Light, Sound And Remote; And With Six Alarm Types: High/low Temperature, Remote System, Power Failure, Sensor Error, Low Battery And Door Ajar Accessories Must Include The Following: Caster, Foot, Porthole, Usb Interface And Printer For Temperature Monitoring Certified Ul And Ce Standards Biological Refrigerator (double Door) High Performance Refrigerator That Can Store Various Biological Products Storage Volume Of At Least 31.4 Cu Ft. (890l) Cabinet Type, Upright Heated Double Pane Glass Door That Will Allow A Clear Display Of Stored Products Without Condensation At At Least 32⁰c And 85% Relative Humidity Condition Should Have At Least 12 Shelves (adjustable) Hydrocarbon Compressor And Refrigerant That Should Not Contain Fluorine Or Chlorine Variable Frequency Compressor With Optimized Cooling System Temperature Range Should Be At 2⁰ To 8⁰c Forced Air Cooling Type Automatic Defrost Mode Capable Self-closing Door Capable Of At Least 90⁰ Stay Open Feature Has Optimized System And Noise Reduction Design To Reduce Noise Level 220~240/50/60 Power Supply (v/hz), 3.5a, 700/850w Microprocessor Electronic Controller And Led Display Stable Performance And Should Have Multiple Functional Alarm Modes: Light, Sound And Remote; And With Six Alarm Types: High/low Temperature, Remote System, Power Failure, Sensor Error, Low Battery And Door Ajar Accessories Must Include The Following: Caster, Foot, Porthole, Usb Interface And Printer For Temperature Monitoring Certified To Ul And Ce Standards Biological Refrigerator (single Door, Mini Refrigerator ) High Performance Refrigerator That Can Store Various Biological Products Storage Volume Of At Least 2.4 Cu Ft. (68l) Cabinet Type, Upright Single Clear Glass Door Should Have At Least 2 Shelves And 1 Drawer (adjustable) Hydrocarbon Compressor And Refrigerant That Should Not Contain Fluorine Or Chlorine Variable Frequency Compressor With Optimized Cooling System Temperature Range Should Be At 2⁰ To 8⁰c Forced Air Cooling Type Lockable Design Has Optimized System And Noise Reduction Design To Reduce Noise Level 220~240/50/60 Power Supply (v/hz), 3.5a, 700/850w Microprocessor Electronic Controller And Led Display Stable Performance And Should Have Multiple Functional Alarm Modes: Light, Sound And Remote; And With Six Alarm Types: High/low Temperature, Remote System, Power Failure, Sensor Error, Low Battery And Door Ajar Accessories Must Include The Following: Caster, Foot, Porthole, Usb Interface And Printer For Temperature Monitoring Certified To Ul And Ce Standards Combined Refrigerator And Freezer High Performance Refrigerator That Can Store Various Biological Products Storage Volume Of At Least 6.5 Cu Ft. (185l) For Refrigerator; At Least 3.4 Cu Ft. (97l) For Freezer Cabinet Type, Upright For Both, With Single Clear Glass Door For Refrigerator Should Have At Least 3 Shelves And 1 Drawer For Refrigerator; 1 Shelf And 2 Drawers For Freezer Hydrocarbon Compressor And Refrigerant That Should Not Contain Fluorine Or Chlorine Has Two Frequency Conversion Compressor Variable Frequency Compressor With Optimized Cooling System Capable Of Automatic Defrost Mode For Refrigerator And Manual Defrosting For Freezer Temperature Range Should Be At 2⁰ To 8⁰c For Refrigerator; -10⁰ To -40⁰c For Freezer Forced Air Cooling Type For Refrigeration; Direct Cooling For Freezer Highly Precise Refrigerator Room Display For At Least 0.1⁰c Has Independent Control Panel Display For Refrigerator Section And Freezer Section Self-closing Door Capable Of At Least 90⁰ Stay Open Feature Has Optimized System And Noise Reduction Design To Reduce Noise Level 220~240/50/60 Power Supply (v/hz), 3.5a, 700/850w Microprocessor Electronic Controller And Led Display Stable Performance And Should Have Multiple Functional Alarm: High/low Temperature, Remote System, Power Failure, Sensor Error, Low Battery, Door Ajar And High Ambient Temperature Accessories Must Include The Following: Caster, Foot, Porthole, Usb Interface And Printer For Temperature Monitoring Certified To Ce And/or Ul Standards Biomedical Freezer (plasma Freezer) High Performance Refrigerator That Can Store Various Biological Products Storage Volume Of At Least 9.3 Cu Ft. (262l) Cabinet Type, Upright Single Door Should Have At Least 7 Drawers Hydrocarbon, Cfc-free Refrigerant Variable Frequency Compressor With Optimized Cooling System Temperature Range Should Be At -20⁰ To -40⁰c Direct Air Cooling Type Capable Of Manual Defrosting Low Energy Consumption Has Optimized System And Noise Reduction Design To Reduce Noise Level 220~240/50/60 Power Supply (v/hz), 3.5a, 700/850w Microprocessor Electronic Controller And Lcd Digital Temperature Display With At Least 0.1⁰c Precision Has A Standard Access Porthole For About 25mm Inside Diameter Stable Performance And Should Have Multiple Functional Alarms: High/low Temperature, Power Failure, Remote System, Sensor Error, Low Battery, Door Ajar, High Ambient, Dirty Condenser And Remote Alarm Accessories Must Include The Following: Caster, Foot, Porthole, Usb Interface And Printer For Temperature Monitoring Certified To Ce Standards Blood Bank Refrigerator (double Door) High Performance Refrigerator That Can Store Various Biological Products Storage Volume Of At Least 48.3 Cu Ft. (1369l) Drawer Type, Upright Heated Double Glass Door That Will Allow A Clear Display Of Stored Products Without Condensation At At Least 32⁰c And 85% Relative Humidity Condition Should Have At Least 12 Drawers Capable Of Providing Optimal Temperature For The Storage Of Blood Products At 2⁰c To 6⁰c Range Hydrocarbon Compressor And Refrigerant That Should Not Contain Fluorine Or Chlorine For A Stable And Reliable, Environmentally Safe Operation; The Refrigeration System Is Powered With A High-quality, Energy-efficient Inverter Compressor And Variable Speed Fan Motors. Temperature Control Responds Quickly And Reliably For A More Uniform Temperature Using Less Power And Lower Noise. Forced Air Cooling Type With Dual Control System Of High-precision Sensors And Mechanical Thermostat To Ensure That The Temperature Is Within Range Capable Of Monitoring Internal Temperature In Real-time, Records Historical Data And Alerts Abnormal Temprature Conditions Should Have A Built-in Battery That Can Continue To Support The Alarm System When There Is A Loss Of Power Supply 220~240/50/60 Power Supply (v/hz), 2.0a, 400w Power Microprocessor Electronic Controller And Lcd Touch Screen Digital Temperature Display That Can Show Temperature Graph, Working Status, Events And Alarm Record Stable Performance And Should Have Multiple Functional Alarms: High/low Temperature, Power Failure, Door Ajar, Sensor Failure, And Low Battery Standard Alarm Features Should Be A Sound Buzzer, Light Flashing, And Remote Contact Accessories Must Include The Following: Caster, Foot, Porthole, Usb Interface And Printer For Temperature Monitoring Certified To Ul And Ce Standards Platelet Agitator With Incubator High Performance Agitator With Incubator That Can Store And Ensure Platelet Viability Cabinet Type, Upright Double Transparent Insulation Glass Door Should Have At Least 10 Drawers Temperature Range Should Be At 20⁰ To 24⁰c Has High Efficiency Refrigeration System, Finned Evaporator, Fast Cooling Speed And Uniformity In Temperature Inside Intelligent Control For Refrigerating And Heating According To Ambient And Inner Temprature Cfc-free Refrigerant Forced Air Cooling Type Can Swing Constantly From Left To Right With No Shaking Or Crushing Around, Horizontal Oscillation Frequency Should Be At Least 60 ±5 Times Per Minute. Oscillation Amplitude Of At Least 50 Mm Can Store At Least 20 Blood Bags Has Uv For Disinfection And Is Capable Of Freely Setting The Disinfection Time 220~240/50/60 Power Supply (v/hz), 280w Microprocessor Control With Increment At 1⁰c And Has Led Digital Temperature Display Stable Performance And Should Have Multiple Functional Alarms: High/low Temperature, Remote System, Power Failure, Sensor Error, Low Battery, Door Ajar Accessories Must Include The Following: Door Lock, Caster, Test Hole And Light Certified To Iso 9001 And Ce Standards Vertical Autoclave Fully Automatic Autoclave Capacity Should Be At Least 80 Liters Chamber Material Must Be Made Up Of Sus 304 Minimum Power Supply And Requirement Of 4600w , 220v, 32a 50/60/hz Capable To At Least 5 To 45⁰c Working Environment With Relative Humidity Of 10% To 85% 0.1⁰c Temperature Accuracy Sterilization Temperature Should Reach 105 To 135⁰c For 1 To 6000 Minutes And Melting Temp At 60-100⁰c Warming Temperature Should Reach 45 To 60⁰c For 1 To 6000 Minutes Drying Temperature Of 80⁰c To 140⁰c For 1 To 300 Minutes Maximum Working Pressure Of At Least 0.25 Mpa And Design Pressure Of At Least 0.3 Mpa Multilayered Pressure Protection System Has At Least 2 Stainless Steel Basket Microcomputer Controlled System With Big Lcd Screen For Easy Display Safety Features That Includes The Following: Self-induction Pressure Interlocking Device, Over Temperature Protection, Dry Scorch Protection System, Lid Closing Checking, Leakage Device Protection, Over Pressure Protection, Safety Valve, Over Current And Short Circuit Protection Certified To Ce And Or Ul Standards Particulars Vendor Shall Warrant That The Product Supplied Shall Meet The Published Specifications. Vendor Shall Provide No Less Than Five (5) Years Warranty On Each Of The Equipment For Spare Parts And Service Upon Acceptance By End User/s. Vendor Agrees To Provide Free Of Charge All Parts And Labour Necessary To Repair Each Of The Equipent Purchased During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Defective In Material Or Workmanship Under Normal Use. Equipment Shall Be Delivered Complete With All Cabling, Connectors, And All Other Accessories Necessary For Full Operation Of The Equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid. Conducts Bi-annnual Preventive Maintenance Program And Provide Preventive Maintenance Report And Corresponding Stickers Attached To The Unit Within The Warranty Period Vendor Must Conduct Annual Calibration Program And Provide Calibration Certificate And Corresponding Stickers Attached To The Unit Within The Warranty Period. Vendor Must Respond With Technical Support Staff, Either Remotely Or In-person Where Applicable, Within At Least Twenty-four (24) Hours Upon Notification Of End-user; Must Perform Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification Of End-user; Equipment Must Meet All Currently Applicable Safety Standards, Local And International Where Applicable. Vendor May Include Post-warranty Comprehensive Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimated For Major Spare Part/s. Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied. Vendor Shall Provide Automatic Voltage Regulator (avr) And Uninterrupted Power Supply (ups) To Back Up The System On Each Equipment Purchased. Equipment Shall Be Delivered With At Least Two (2) Copy Of All Service Manuals And At Least Two (2) Copy Of All User Manuals. Certification From The Manufacturer That The Units Are Brand New And Not With Any Issues Or Defect. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted Equipment For Not Less Than Five (5) Years After The Warranty Period. Vendor Shall Provide Comprehensive Training Of Users In Operation, Basic And Advance Maintenance Shall Be Provided With Certificates, Vendor Shall Agree To Provide Factory Or Principal Manufacturer Training And/or Certification For At Least Two (2) In-house Biomedical Technician Or Engineer And/or End User. Principal's/manufacturer's Product Portfolio Must Have Been Present In The Local Market For The Past Ten (10) Years. Equipment Must Be Manufactured By A Known And Reputable Company With Certificate Of Iso 9001:2015 And Iso 13485:2016 Or Its Equivalent. Inclusions Of The Following Items: At Least Two (2) Units 5 Liter Water Bath And At Least One (1) Unit Dry Bath. Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. .<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>. Item: 4 Unit: Lot Qty: 1 Unit Cost: 20,000,000.00 Total Cost: 20,000,000.00 Description: Thoracic Multidisciplinary Tower, Surgery 4k Monitor Camera System - Modular Camera Platform Camera System - Link Module For 4k And 4k/3d Camera Head Plastic Container For Camera Head Light Cable Light Source Footswitch Pedal Insufflator Insufflation Tubing Set Gas Filter Co2 High Pressure Hose Documentation System Usb Adaptor For Connection To Ccu Equipment Cart Monitor Swivel Arm Video-assisted Thoracoscopic Surgery Instruments Set Telescope Invisible Near-infrared (nir) / Fluorescence Imaging With Indocyanine Green (icg) 30° Tray For Cleaning Hd Monitor Connecting Cable For Videolaryngoscope Reusable Macintosh/curved Video Laryngoscope Blades #3 Reusable Difficult Blades For Adult Flexible Intubation Video Endoscope For Adult, Disposable Stand For Monitor Video Assisted Thoracic Multidisciplinary Surgical Tower, 1 Unit 4k Monitor, 1 Pc Supports 4k Via Displayport, 12g-sdi, And Hdmi 2.0 Inputs Backward Compatible With Hd Signals Screen Size: Must Be At Least 32 Inches Front Glass Must Be Optically Bonded, Ar Coated, Chemically Strengthened Glass Camera System, 1 Pc Modular Camera Platform That Combines Various Technologies Like Rigid, Flexible, 3d Endoscopy, 4k And Can Be Adapted With Invisible Near Infrared / Indocyanine Green (nir/icg) For Fluorescence Imaging. High-resolution Camera System For Universal Use 4k Resolution And Modern Image Processing Technology Connection Possibility For Use With Up To 3 Link Modules Link Module For 4k And 4k/3d Line Frequency Should Be At Least 50/60 Hz Camera Head, 1 Pc With 2 Freely Programmable Camera Head Buttons Focus Adjustable Via Focus Ring Image Sensor: 2 X 1/2.5″ Complementary Metal-oxide Semiconductor (cmos) Chip. Should Be Soakable Plastic Container For Camera Head, 1 Pc Autoclavable Suitable For Use With Steam, Gas, And Hydrogen Peroxide Sterilization, Sterilization Compatible External Dimensions (wxdxh): At Least 385mm X 255mm X 75 Mm Light Cable, 1 Pc At Least 250 Cm (l) And Ø4.8 Mm , For Use With Icg Application Disinfection Can Be Done Through Low Temperature Or Soaking Straight Light Source, 1 Pc Average Led Lamp Life Of At Least 30,000 Hours Standby Button With Memory Function Lamp Type: Two High-performance Leds, White Light Led And Near Infrared Led Footswitch Pedal, 1 Pc With Button For Switchover Function Cable Length At Least 500 Cm Insufflator, 1 Pc 2 Modes Ready: High Flow Mode And Pediatric Mode Dimension (w X D X H) : At Least 305mm X 164mm X 315mm With External Co2 Warmer At Least 7” Touchscreen Displays Precise Monitoring With Inclusions: Connecting Cable, Length 100 Cm (1pc), Universal Wrench (1pc) Insufflation Tubing Set, 1 Pc Reusable, Sterilisable, Heatable, At Least 2.65 M (length), For Use With Insufflation Unit, Max Flow: 50l/min Gas Filter, 1 Pc With Iso Connectors, Hydrophobic On Both Sides, For Single Use, Sterile, Pack Of At Least 25, For Use With Insufflation Units With Max. Gas Flow Of 50 L/min, Disposable Co2 High Pressure Hose, 1 Pc American Connection/iso-connection, At Least 102 Cm (length) Documentation System, 1 Pc Control Via Smartscreen With Dicom Connection Full Hd, 4k, And 3d Capture Internal Memory: At Least 2 Tb Usb Adaptor For Connection To Ccu Equipment Cart, 1 Pc Narrow, Tall, Rides On 4 Antistatic Dual Wheels Equipped With Locking Brakes Energy Beam With Integrated Electrical Sub Distributors With At Least 12 Sockets Equipment Cart (w X H X D) : At Least 660mm X 1474mm X 730mm Shelf (w X H X D): At Least 450mm X 25mm X 510mm Consisting Of: Base Module, Cover, Beam Package, Shelf, Drawer Unit With Lock, Equipment Rail, Camera Holder, Mains Cord, Length 100 Cm Monitor Swivel Arm, 1 Pc Height And Side Adjustable, Can Be Mounted On The Left Or On The Right Side Loading Capacity Max: 15 Kg, With Monitor Mount Video Electronics Standards Association (vesa) 75/100 Video-assisted Thoracoscopic Surgery (vats) Instruments Cannula, Suction, Video-assisted Thoracoscopic Surgery (vats), With Control, 1pc Scissors, Tc, Acc. Metzenbaum, 1pc Forceps, Slider-shaft, Cobra Dissector, 1pc Forceps, Slider-shaft, Acc. Foerster, 1pc Forceps, Slider-shaft, Lymph Nodes, 1pc Forceps, Slider-shaft, Acc. Harken, 1pc Scissors, Slider-shaft, Acc. Metzenbaum, 1pc Holder, Needle, Slider-shaft, Tc, 1pc Pusher, Knot, Tube Shaft, 1pc Container For Video-assisted Thoracoscopic Surgery (vats) Instruments , Sterilization Tray, Sterilization, Plugin Profile, 1pc Tray, Sterilization, Plugin Profile, 1pc Basket, Sterilization, Tray 1/1, 1pc Elastic Strap, 1pc Telescope For Icg Telescope Invisible Near-infrared (nir) Fluorescence Imaging With Indocyanine Green (icg) 30° Forward-oblique Telescope, Enlarged View, At Least 10mm (d) And 31 Cm (l), Autoclavable For Indocyanine Green, Fiber Optic Light Transmission Incorporated, 1 Pc Tray, For Cleaning, Sterilization And Storage Of Rigid Endoscope And One Light Cable, Including Holder For Adaptors, Silicone Telescope Holders And Lid, 1 Pc Airway Management Hd Monitor, 2 Units With At Least 8" Touch Screen Operation Minimum Image Resolution: 1920 X 1200 Pixel Capable Of Two Camera Inputs Compatible With Other Components Such As Flexible Intubation Video Endoscopes (single Use And Reusable) Retromolar Intubation Endoscope, Rigid Intubation Endoscope With Deflectable Tip, Video Laryngoscope Blades Components Such As Previous Version Of Video Laryngoscope Blades Are Compatible Capable Of Picture-in-picture And Side-by-side Modes Data Transfer From Sd Card To Usb Flash Drive Possible With Usb Port For Easy Data Backup With Hdmi Output For Connecting An External Monitor With Real Time Video And Image Capturing In At Least 16 Gb Sd Card Capable Of Audio Recording With Integrated Microphone With Automatic Video Recording Once Blade Or Video Unit Is Connected With Timer For Documenting Intubation Time Capable Video Clip Playback And Still Images Must Be Splash-proof According To At Least Ip54, Suitable For Wipe Disinfection Made Of Shock-resistant Abs Plastic Housing With Built In Rechargeable Li-ion Batteries Power Supply 110 - 240 Vac, 50/60 Hz Connecting Cable For Video Laryngoscope, With Length Of At Least 200 Cm, 2 Pcs Reusable Macintosh / Curved Video Laryngoscope Blades #3, 1 Pc Complementary Metal-oxide Semiconductor (cmos) Technology Light Alloy Design , Robust And Light Plug And Play Interface With Button On Blade For Documentation Of Images And Video Sequences Integrated Camera And Led Light Reusable Difficult Blades For Adult, 2 Pcs Complementary Metal-oxide Semiconductor (cmos) Technology Light Alloy Design Plug And Play Interface With Button On Blade For Documentation Of Images And Video Sequences Integrated Camera And Led Light With Port/catheter Introduction Size Of 16-18 Fr. Includes Guide Rod Made Of Stainless Steel With Atraumatic Tip For Use With Video Laryngoscopes, 1 Pack Includes Protection Cap For Cleaning And Disinfection, 1 Pc Flexible Intubation Video Endoscope For Adult, Disposable (single Use), 6pcs/pack, 1 Pack Direct Connection To Monitor Complementary Metal-oxide Semiconductor (cmos) Technology Clear, Pixel Free Images With Integrated Led Light Source Distal Tip Outer Diameter At Least 5.5 Mm Working Channel Inner Diameter: At Least 2.1 Mm Deflection Up/down: At Least 140°/140° Angle Of View: At Least 100° Working Length: At Least 65 Cm Must Have Tube Fixation With Suction Valve Stand Monitor, 2 Units Height Of At Least 1340 Cm Rollable With At Least Five Legs And Antistatic Castors Crossbar At Least Length 250 Mm X Diameter 25 Mm For Positioning The Monitor Storage Tray Dimensions (w X D X H): At Least 300 Mm X 200 Mm X 150 Mm With Blade Holder Set And Cable Winder Particulars Vendor Shall Warrant That The Product Supplied Shall Meet The Published Specifications. Minimum Of Five (5) Year/s For Spare Parts & Service Upon Acceptance By End-user Vendor Must Repair Or Replace Any Item And/or Part/s Of The Equipment Found To Be Defective In Material Or In Workmanship Under Normal Use, Provided That The Equipment Is In Good Working Condition Thereafter, Within The Warranty Period Conduct Free Preventive Maintenance At Least Semi-annually Or According To Manufacturer's Recommendation/s Within Warranty Period. Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification From End-user; Technical Support Staff Response Time Within At Least Two (2) Hours Via Remote Access Or Maximum Of Twenty-four (24) Hours Either Via Physical Presence On Site. Equipment Down-time Within Warranty Period Due To Inherent Defect/s And/or Fault/s Shall Be Added To The Total Warranty Period Availability Of Support Staff Within Visayas Delivery, Installation, Commissioning, Permit/s, Training And Other Related Expenses Incurred Will Be Shouldered By Winning Bidder, Where Applicable Vendor Must Provide Intensive Operational Or Application Training With Certification/s For End-user/s And Intensive Technical Training For Maintenance/biomedical Staff. Must Certify The Availability Of Spare Parts For The Next Five (5) Years Vendor Must Have Existing/active Quality Management System Certification E.g. Iso Certification 13485:2016 And Its Equivalent For Importation, Warehousing, Installation & Servicing Of Active And Non-active Medical Services. Equipment Shall Be Delivered With At Least Two (2) Copies Of User Manuals. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production For At Least 2 Years, Installed And In Use At The Time Of Quote/bid Principal’s / Manufacturer’s Products Must Have Been Present In The Local Market For The Past Ten (10) Years Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted System For Not Less Than Five (5) Years After The Warranty Period Vendor To Shoulder Any Expenses Related To Delivery, Installation, Commissioning, Permit/s, Training And Other Sundries Necessary For The Complete Installation Of The Equipment Vendor Shall Agree To Provide Factory Or Principal Manufacturer Training And/or Certification For At Least One (1) In-house Biomedical Technologist Or Engineer And/or Other End User. Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. .<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.

Spain-madrid: Accounting And Auditing Services

Purchaser Name: Support Services, Cleaning Affairs and Return Capital General Directorate TICARET BANKING | Electrical Energy Recruitment

Purchaser Name: Support Services, Cleaning Affairs and Return Capital General Directorate TICARET BANKING | Purchase of Food Preparation and Distribution Services Excluding Labor